Grazvydas Ignotas [Wed, 12 Aug 2009 09:05:49 +0000 (12:05 +0300)]
add bci stuff to defconfig
Grazvydas Ignotas [Wed, 12 Aug 2009 09:01:24 +0000 (12:01 +0300)]
bci: test code from linux-omap list
Grazvydas Ignotas [Wed, 12 Aug 2009 08:58:33 +0000 (11:58 +0300)]
pandora: setup data for madc and bci, allow bci driver to compile
Grazvydas Ignotas [Wed, 12 Aug 2009 08:54:57 +0000 (11:54 +0300)]
madc: populate madc->dev to avoid a crash
Grazvydas Ignotas [Tue, 19 May 2009 14:32:17 +0000 (17:32 +0300)]
rev3 changes
Grazvydas Ignotas [Sun, 7 Jun 2009 16:43:03 +0000 (19:43 +0300)]
input: hack: get alt/ctrl picked up as start/select by jsdev
Grazvydas Ignotas [Tue, 19 May 2009 14:07:38 +0000 (17:07 +0300)]
input: make start select act as alt/ctrl
Grazvydas Ignotas [Sun, 3 May 2009 19:36:39 +0000 (22:36 +0300)]
defconfig: enable DSS2
Grazvydas Ignotas [Sun, 3 May 2009 12:43:15 +0000 (15:43 +0300)]
DSS2: add support for FBIO_WAITFORVSYNC
FBIO_WAITFORVSYNC is semi-stardard ioctl for waiting vsync, already
used by some userspace, so add it as an alias for OMAPFB_WAITFORVSYNC.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Grazvydas Ignotas [Sun, 3 May 2009 12:36:09 +0000 (15:36 +0300)]
DSS2: use 16bpp recommended_bpp, for now
Grazvydas Ignotas [Fri, 1 May 2009 16:55:33 +0000 (19:55 +0300)]
misc: remove wait_vsync proc entry
DSS2 offers OMAPFB_WAITFORVSYNC ioctl for that.
Grazvydas Ignotas [Fri, 1 May 2009 16:53:28 +0000 (19:53 +0300)]
DSS2: Add DSS2 support for Pandora
Grazvydas Ignotas [Wed, 29 Apr 2009 09:36:40 +0000 (12:36 +0300)]
DSS2: Add TPO TD043MTEA1 panel
This panel is used by OMAP3 pandora.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Hardik Shah [Mon, 27 Apr 2009 07:45:07 +0000 (13:15 +0530)]
DSS2: Documentation update for new sysfs entries in omapdss/manager
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Fri, 24 Apr 2009 09:03:48 +0000 (14:33 +0530)]
DSS2: Rotation attrs for YUV need not to be reversed for 90 and 270
DSS2 supports horizontal mirroing. so only 180 and 0 degree attributes needs
to be reversed for mirroring.
Slight corrupt image is seen with 90 ad 270 degree rotation with mirroring
when the image height and widht is not 32-pixels aligned. To be specific
resolution is 168X192.
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Fri, 24 Apr 2009 09:59:06 +0000 (15:29 +0530)]
DSS2: Added global alpha support.
global_alpha sysfs entry for video1 plane will always show 255 as
it does not support global_alpha.
Initliazied the global alpha field for all the overlays
to 255 (fully opaque).
Documentation also updated.
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Tomi Valkeinen [Mon, 27 Apr 2009 08:06:16 +0000 (11:06 +0300)]
DSS2: DSI: more error handling
Tomi Valkeinen [Thu, 23 Apr 2009 07:46:53 +0000 (10:46 +0300)]
DSS2: disable LCD & DIGIT before resetting DSS
This seems to fix the synclost problem that we get, if the bootloader
starts the DSS and the kernel resets it.
Imre Deak [Wed, 22 Apr 2009 12:40:48 +0000 (14:40 +0200)]
DSS2: VRAM: fix section mismatch warning
postponed_regions are accessed from the non __init
omap_vram_add_region().
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Tomi Valkeinen [Wed, 22 Apr 2009 11:11:52 +0000 (14:11 +0300)]
DSS2: VRAM: use debugfs, not procfs
Tomi Valkeinen [Wed, 22 Apr 2009 07:26:06 +0000 (10:26 +0300)]
DSS2: OMAPFB: remove fb clearing code
VRAM manager does the clearing now when the area is allocated.
Tomi Valkeinen [Wed, 22 Apr 2009 07:25:20 +0000 (10:25 +0300)]
DSS2: VRAM: clear allocated area with DMA
Use DMA constant fill feature to clear VRAM area when
someone allocates it.
Tomi Valkeinen [Wed, 22 Apr 2009 07:06:08 +0000 (10:06 +0300)]
OMAP2/3: DMA: implement trans copy and const fill
Implement transparent copy and constant fill features for OMAP2/3.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Imre Deak [Tue, 21 Apr 2009 13:18:36 +0000 (15:18 +0200)]
DSS2: fix return value for rotate_type sysfs function
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Tomi Valkeinen [Tue, 21 Apr 2009 07:11:55 +0000 (10:11 +0300)]
DSS2: DSI: decrease sync timeout from 60s to 2s
The framedone-problem should be ok now, so we shouldn't get long waits.
Tomi Valkeinen [Tue, 21 Apr 2009 06:25:16 +0000 (09:25 +0300)]
DSS2: Fixed line endings from , to ;
Imre Deak [Mon, 20 Apr 2009 12:55:33 +0000 (14:55 +0200)]
DSS2: add sysfs entry for seting the rotate type
This can help in utilizing VRAM memory better. Since with VRFB rotation
we waste a lot of physical memory due to the VRFB HW design, provide the
possibility to turn it off and free the extra memory for the use by other
planes for example.
Ville Syrjälä [Mon, 20 Apr 2009 14:26:20 +0000 (16:26 +0200)]
DSS2: Swap field 0 and field 1 registers
The values for the registers which have alternate values for each field
were reveresed to what the hardware expects. For the hardware field 0
is the even field or the bottom field, field 1 is the odd field or the
top field. So simply swap the register values.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Ville Syrjälä [Mon, 20 Apr 2009 14:26:19 +0000 (16:26 +0200)]
DSS2: Don't enable fieldmode automatically
The only case where enabling fieldmode automatically seems reasonable
is when source and destination heights are equal. Some kind of user
controllable knob should be added so the user could enable field mode
when the source is interlaced.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Ville Syrjälä [Mon, 20 Apr 2009 14:26:18 +0000 (16:26 +0200)]
DSS2: Disable vertical offset with fieldmode
When using fieldmode each field is basically a separate picture so the
vertical filter should start at phase 0 for both fields.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Hardik Shah [Fri, 17 Apr 2009 08:54:46 +0000 (14:24 +0530)]
DSS2: Provided proper exclusion for destination color keying and alpha blending.
OMAP does not support destination color key and alpha blending
simultaneously. So this patch does not allow the user
so set both at a time.
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Fri, 17 Apr 2009 08:28:21 +0000 (13:58 +0530)]
DSS2: Add sysfs entry to for the alpha blending support.
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Fri, 17 Apr 2009 04:21:25 +0000 (09:51 +0530)]
DSS2:OMAPFB: Some color keying pointerd renamed in DSS2. Replicated in FB
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Fri, 17 Apr 2009 04:12:36 +0000 (09:42 +0530)]
DSS2: Added support for querying color keying.
V4L2 Framework has a ioctl for getting/setting color keying.
So added the function manager pointers for doing same.
Modifed the color keying sysfs entries to use manager
function pointer. Earlier they were calling direcly
dispc function to set/enable color keying.
Some of color-keying function pointers in the overlay_manager
structure re-named to be more specific.
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Thu, 16 Apr 2009 13:30:11 +0000 (19:00 +0530)]
DSS2: Added support for setting and querying alpha blending.
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Thu, 16 Apr 2009 13:17:49 +0000 (18:47 +0530)]
DSS2: Added the function pointer for getting default color.
V4L2 Framework has a CID for getting/setting default color.
So added the function pointer for doing same.
SYSFS based getting the default color will remain same
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Tomi Valkeinen [Thu, 16 Apr 2009 14:56:00 +0000 (17:56 +0300)]
DSS2: VRAM: improve omap_vram_add_region()
Combine postponed and non-posponed versions of omap_vram_add_region.
Make the func non-static, so it can be called from board files.
Ville Syrjälä [Thu, 9 Apr 2009 13:04:43 +0000 (15:04 +0200)]
DSS2: Prefer 3-tap filter
The 5-tap filter seems rather unstable. With some scaling settings it
works and with some it doesn't even though the functional clock remains
within the TRM limits. So prefer the 3-tap filter unless the functional
clock required for it is too high.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Ville Syrjälä [Thu, 9 Apr 2009 13:04:44 +0000 (15:04 +0200)]
DSS2: Fix DISPC_VID_FIR value for omap34xx
The msbs of the DISPC_VID_FIR fields were incorrectly masked out on
omap34xx and thus 4:1 downscale did not work correctly.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Imre Deak [Tue, 14 Apr 2009 12:50:11 +0000 (14:50 +0200)]
DSS2: do bootmem reserve for exclusive access
BOOTMEM_DEFAULT would allow multiple reservations for the same location,
we need to reserve the region for our exclusive use. Also check if the
reserve succeeded.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Hardik Shah [Wed, 15 Apr 2009 11:35:18 +0000 (17:05 +0530)]
DSS2: dispc_get_trans_key was returning wrong key type
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Tim Yamin [Mon, 13 Apr 2009 20:57:42 +0000 (13:57 -0700)]
DSS2: OMAPFB: Set line_length correctly for YUV with VRFB.
Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Hardik Shah [Thu, 9 Apr 2009 06:43:07 +0000 (12:13 +0530)]
DSS2: OMAPFB: Added support for the YUV VRFB rotation and mirroring.
DSS2 now requires roatation_type to be specified by driver.
Added support for that.
DSS2 OMAPFB: Modified to pass the dss mode to omap_vrfb_setup function.
VRFB size register requires the width to be halved when the
mode is YUV or UYVY. So VRFB is modifed to pass the mode to omap_vrfb_setup
function.
Few changes done by Tim Yamin
Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Hardik Shah [Thu, 9 Apr 2009 06:39:44 +0000 (12:09 +0530)]
DSS2: VRFB rotation and mirroring implemented.
DSS2 modified to accept the rotation_type input
to get the dma or VRFB rotation.
DSS2: VRFB: Changed to pass DSS mode to vrfb_setup instead of Bpp.
VRFB size registers requires the width to be halved when the
mode is YUV or UYVY. So modifed to pass the mode to omap_vrfb_setup
function.
Code added by Tim Yamin for few bug fixes
Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Tomi Valkeinen [Wed, 15 Apr 2009 11:06:54 +0000 (14:06 +0300)]
DSS2: DSI: sidlemode to noidle while sending frame
DISPC interrupts are not wake-up capable. Smart-idle in DISPC_SIDLEMODE
causes DSS interface to go to idle at the end of the frame, and the
FRAMEDONE interrupt is then delayed until something wakes up the DSS
interface.
So we set SIDLEMODE to no-idle when we start sending the frame, and
set it back to smart-idle after receiving FRAMEDONE.
Hardik Shah [Mon, 13 Apr 2009 13:20:24 +0000 (18:50 +0530)]
DSS2: VRFB: Macro for calculating base address of the VRFB context was faulty
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Tomi Valkeinen [Thu, 9 Apr 2009 09:10:46 +0000 (12:10 +0300)]
DSS2: Beagle: Use gpio_set_value
Imre Deak [Wed, 8 Apr 2009 10:51:46 +0000 (12:51 +0200)]
DSS2: pass the default FB color format through board info
Add a field to the FB memory region platform data, so that board
init code can pass a default color format to the driver. Set this
format as an initial setting for the given FB.
This is needed for an upcoming patch that adds detection of the
color format set by the bootloader.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Imre Deak [Mon, 6 Apr 2009 20:26:04 +0000 (22:26 +0200)]
DSS2: FB: remove unused var warning
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Ville Syrjälä [Mon, 6 Apr 2009 15:32:06 +0000 (17:32 +0200)]
DSS2: Add venc register dump
Add a new file to debugfs to dump the VENC registers. The function
prototype was already there but the implementation was missing.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Ville Syrjälä [Mon, 6 Apr 2009 15:32:05 +0000 (17:32 +0200)]
DSS2: Check scaling limits against proper values
Move the ilace and fieldmode related height adjustments to be performed
before checking the scaling limits.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Ville Syrjälä [Mon, 6 Apr 2009 15:32:04 +0000 (17:32 +0200)]
DSS2: Check fclk limits when configuring video planes
Check that the currect functional clock is fast enough to support
the requested scaling ratios. Also check if 5-tap filtering can be
used even though the downscaling ratio is less than 1:2 since the
functional clock rate required for 5-tap filtering can be less than
the requirement for 3-tap filtering, and 5-tap filtering should look
better.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Tomi Valkeinen [Tue, 7 Apr 2009 07:01:58 +0000 (10:01 +0300)]
DSS2: check for ovl paddr only when enabling
It seems Xvideo uses SETUP_PLANE ioctl even when
the fb memory has not been allocated. Sigh.
Ville Syrjälä [Fri, 3 Apr 2009 17:09:20 +0000 (19:09 +0200)]
DSS2: Disable video planes on sync lost error
When encountering the sync lost error disable the display and all video
planes on the affected manager. Afterwards re-enable the display.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Tomi Valkeinen [Thu, 2 Apr 2009 14:42:26 +0000 (17:42 +0300)]
DSS2: DSI: improve packet len calculation
Tomi Valkeinen [Thu, 2 Apr 2009 13:49:27 +0000 (16:49 +0300)]
DSS2: DSI: calculate VP_CLK_RATIO properly
Tomi Valkeinen [Thu, 2 Apr 2009 13:48:41 +0000 (16:48 +0300)]
DSS2: Add function to get DSS logic clock rate
Tomi Valkeinen [Thu, 2 Apr 2009 11:21:12 +0000 (14:21 +0300)]
DSS2: Verify that overlay paddr != 0
Tomi Valkeinen [Thu, 2 Apr 2009 10:47:11 +0000 (13:47 +0300)]
DSS2: Fix DMA rotation
u16 was not a good type for offsets. First, they need to be signed,
and second, 16 bits is not enough.
Vaibhav Hiremath [Tue, 31 Mar 2009 13:08:31 +0000 (18:38 +0530)]
DSS2: Allocated memory for Color Look-up-table
We were not allocating memory for CMAP buffer and due to that
G_CMAP was failing, since it does check for size of CMAP buffer.
Called "fb_alloc_cmap" for llocating memory for CMAP.
We are currently not supporting 1,2,4,8 bpp, so meaning less
for us as of now. But for completeness this is required.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Vaibhav Hiremath [Tue, 31 Mar 2009 13:17:32 +0000 (18:47 +0530)]
DSS2: Small VRFB context allocation bug fixed
This is minor bug while requesting and mapping memory for
VRFB space.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Imre Deak [Thu, 2 Apr 2009 08:47:13 +0000 (11:47 +0300)]
DSS2: Add acx565akm panel
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Imre Deak [Wed, 1 Apr 2009 12:36:39 +0000 (14:36 +0200)]
DSS2: Add function to display object to get the backlight level
This is needed by an upcoming patch that changes the backlight
initialization to use the backlight level set by the bootloader.
Also add a field for the maximum backlight level.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Tomi Valkeinen [Thu, 2 Apr 2009 07:36:05 +0000 (10:36 +0300)]
DSS2: Add DSS2 support for SDP, Beagle, Overo, EVM
Also custom dss_*_defconfigs as an example.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Tomi Valkeinen [Thu, 2 Apr 2009 07:31:57 +0000 (10:31 +0300)]
DSS2: HACK: Add DSS2 support for N800
Works, but it an ugly quick hack.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Tomi Valkeinen [Thu, 2 Apr 2009 07:29:56 +0000 (10:29 +0300)]
DSS2: Add panel drivers
- Generic panel
- Samsung LTE430WQ-F0C LCD Panel
- Sharp LS037V7DW01 LCD Panel
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Tomi Valkeinen [Thu, 2 Apr 2009 07:25:48 +0000 (10:25 +0300)]
DSS2: OMAP framebuffer driver
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Tomi Valkeinen [Thu, 2 Apr 2009 07:23:42 +0000 (10:23 +0300)]
DSS2: OMAP2/3 Display Subsystem driver
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Tomi Valkeinen [Wed, 11 Feb 2009 14:33:02 +0000 (16:33 +0200)]
OMAPFB: move omapfb.h to include/linux/
This is needed so that omapfb.h is automatically exported to user space.
omapfb.h should be cleaned up later. Some stuff can probably be moved
to omapfb's private include file.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Grazvydas Ignotas [Thu, 16 Apr 2009 09:44:54 +0000 (12:44 +0300)]
Add omap_rev() hack
omap_rev() was added in .28 (renamed from system_rev), so we
use this hack here.
Mans Rullgard [Mon, 20 Oct 2008 23:24:24 +0000 (00:24 +0100)]
OMAP: Add clk_get_parent() for OMAP2/3
This makes clk_get_parent() work on OMAP2/3.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Wed, 28 Jan 2009 02:13:12 +0000 (19:13 -0700)]
[ARM] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
Filling the set_rate and round_rate fields of dpll4_m4_ck makes
this clock programmable through clk_set_rate(). This is needed
to give omapfb control over the dss1_alwon_fck rate.
This patch includes a fix from Tomi Valkeinen <tomi.valkeinen@nokia.com>.
linux-omap source commits are
e42218d45afbc3e654e289e021e6b80c657b16c2 and
9d211b761b3cdf7736602ecf7e68f8a298c13278.
Signed-off-by: Måns Rullgård <mans@mansr.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Grazvydas Ignotas [Sun, 8 Mar 2009 21:56:18 +0000 (23:56 +0200)]
vsense: change polling time
Do polls every ~30ms instead of ~25ms with hope to avoid
some strange breakage of nub operation.
Grazvydas Ignotas [Sun, 8 Mar 2009 21:36:52 +0000 (23:36 +0200)]
input: hack: get gpio-keys registered with joydev
Make d-pad send absolute events too and hack joydev to
notice that.
David Brownell [Tue, 25 Nov 2008 07:11:03 +0000 (23:11 -0800)]
USB: gadget: fix rndis working at high speed
Fix a bug specific to highspeed mode in the recently updated RNDIS
support: it wasn't setting up the high speed notification endpoint,
which prevented high speed RNDIS links from working.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Anand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Röjfors [Sun, 16 Nov 2008 03:53:24 +0000 (19:53 -0800)]
USB: gadget rndis: send notifications
It turns out that atomic_inc_return() returns the *new* value
not the original one, so the logic in rndis_response_available()
kept the first RNDIS response notification from getting out.
This prevented interoperation with MS-Windows (but not Linux).
Fix this to make RNDIS behave again.
Signed-off-by: Richard Röjfors <richard.rojfors@endian.se>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 16 Nov 2008 03:53:21 +0000 (19:53 -0800)]
USB: gadget rndis: stop windows self-immolation
Somewhere in the conversion of the RNDIS gadget code to the new
framework, the descriptor of its data interface seems to have
been copied from the CDC Ethernet driver. Unfortunately that
means it got a nonzero altsetting ... which is incorrect. Issue
uncovered by Richard Röjfors <richard.rojfors@endian.se>.
This patch fixes that problem, and resolves at least some cases
of Windows XP bluescreening itself.
Tested-by: Richard Röjfors <richard.rojfors@endian.se>.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grazvydas Ignotas [Sat, 14 Feb 2009 21:18:50 +0000 (23:18 +0200)]
Switch to experimental 60Hz settings
Grazvydas Ignotas [Mon, 9 Feb 2009 12:00:50 +0000 (14:00 +0200)]
Enable PWM backlight in defconfig
Grazvydas Ignotas [Sun, 8 Feb 2009 22:33:02 +0000 (00:33 +0200)]
Rename omapfb panel sys entry
Do this to prevent some userspace apps from using it, as
it is not functional anyway.
Grazvydas Ignotas [Sun, 8 Feb 2009 22:30:57 +0000 (00:30 +0200)]
Make pandora use twl4030-pwm0-bl instead of gpio-bl
Grazvydas Ignotas [Sun, 8 Feb 2009 22:26:48 +0000 (00:26 +0200)]
Add hackish TWL4030 PWM0 Backlight Driver
Grazvydas Ignotas [Wed, 4 Feb 2009 20:57:58 +0000 (22:57 +0200)]
vsense: add new modes of operation
This allows the device to act as mouse or scrolling device.
Mode can be switched by writing to special file in
/proc/pandora ("absolute", "mouse" and "scroll").
Grazvydas Ignotas [Tue, 3 Feb 2009 20:22:35 +0000 (22:22 +0200)]
Change the way pandora proc entry is registered
Only create pandora directory if it's not there yet.
Don't remove it on module unload, because it might be used
by other drivers.
Grazvydas Ignotas [Tue, 3 Feb 2009 20:19:35 +0000 (22:19 +0200)]
Enable GPIO debounce feature for GPIO keys
This should fix multiple events firing on single key press
or release.
Grazvydas Ignotas [Sun, 25 Jan 2009 13:40:46 +0000 (15:40 +0200)]
Enable wifi related things in defconfig
Grazvydas Ignotas [Wed, 21 Jan 2009 21:17:25 +0000 (23:17 +0200)]
HSMMC: Fix MMC3 transfers by defining MMC3 DMA
Grazvydas Ignotas [Sun, 18 Jan 2009 16:26:19 +0000 (18:26 +0200)]
HSMMC: Improve error handling, check more error bits
San Mehat [Thu, 15 May 2008 16:15:37 +0000 (09:15 -0700)]
mmc: Add new API call 'sdio_reset_comm' for resetting communication with an SDIO device
Signed-off-by: San Mehat <san@android.com>
Dmitry Shmidt [Tue, 11 Nov 2008 19:22:38 +0000 (11:22 -0800)]
trout: Add functions for WiFi
Grazvydas Ignotas [Tue, 13 Jan 2009 16:28:37 +0000 (18:28 +0200)]
Hack wifi embedded data directly into MMC host driver
This will hopefully move to a better place in future.
San Mehat [Mon, 14 Apr 2008 22:22:49 +0000 (15:22 -0700)]
mmc: Add concept of an 'embedded' SDIO device.
This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.
mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data
Signed-off-by: San Mehat <san@google.com>
Grazvydas Ignotas [Tue, 13 Jan 2009 15:38:41 +0000 (17:38 +0200)]
Add MMC3 fake detect function
This is needed to be able to initialize MMC3 right from
the wifi driver.
Grazvydas Ignotas [Tue, 13 Jan 2009 15:37:12 +0000 (17:37 +0200)]
Add platform_data to enable MMC3.
Adrian Hunter [Thu, 16 Oct 2008 13:37:23 +0000 (16:37 +0300)]
ARM: OMAP: calculate hsmmc data timeout accurately
The data timeout can be calculated from the clock
rate and timing values given by the card. At
present the timeout is set to the maximum value,
about 2.7 secs. When dealing with cards that do have
errors, this causes large unnecessary delays because
the correct timeout may be around 10 millisecs.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter 'p2' De Schrijver [Mon, 20 Oct 2008 08:37:52 +0000 (11:37 +0300)]
Move existing TWL4030 code to drivers/mfd
This patches moves the twl4030 power sequencer code to drivers/mfd and
updates the code for the new twl4030 framework. The code handles downloading
the scripts provided by the board configuration and configuring the chip
to call the relevant script for each event (processor group 1 and 2 sleep,
processor group 3 sleep, wakeup or warm reset).
Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter 'p2' De Schrijver [Mon, 20 Oct 2008 08:37:51 +0000 (11:37 +0300)]
Add defines and data types for twl4030.
This patch adds a bunch of data types and defines to handle the twl4030 power sequence scripts.
Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Grazvydas Ignotas [Fri, 9 Jan 2009 22:04:55 +0000 (00:04 +0200)]
Minor timing adjustment to fix left border
Grazvydas Ignotas [Fri, 9 Jan 2009 22:01:07 +0000 (00:01 +0200)]
Possible fix for omapfb irq errors
tested with at least 50 boots now
Tomi Valkeinen [Fri, 12 Dec 2008 07:48:53 +0000 (09:48 +0200)]
OMAP: wait for pwrdm transition after clk_enable()
Enabling clock in a disabled power domain causes the power domain to be
turned on. However, the power transition is not always finished when
clk_enable() returns and this randomly crashes the kernel when an
interrupt happens right after the clk_enable, and the kernel tries to
read the irq status register for that domain.
Why the irq status register is inaccessible, I don't know. Also it
doesn't seem to be related to the module being not powered up, but to
the transition itself.
The same could perhaps happen after clk_disable also, but I have not
witnessed that.
The problem affects at least dss, cam and sgx clocks.
This change waits for the transition to be finished before returning
from omap2_clkdm_clk_enable().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>