pandora-kernel.git
7 years agoARM: 8165/1: alignment: don't break misaligned NEON load/store
Robin Murphy [Thu, 25 Sep 2014 10:56:19 +0000 (11:56 +0100)]
ARM: 8165/1: alignment: don't break misaligned NEON load/store

commit 5ca918e5e3f9df4634077c06585c42bc6a8d699a upstream.

The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn
instructions (where the optional alignment hint is given but incorrect)
as LDR/STR, leading to register corruption. Detect these and correctly
treat them as unhandled, so that userspace gets the fault it expects.

Reported-by: Simon Hosie <simon.hosie@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosched: Fix unreleased llc_shared_mask bit during CPU hotplug
Wanpeng Li [Wed, 24 Sep 2014 08:38:05 +0000 (16:38 +0800)]
sched: Fix unreleased llc_shared_mask bit during CPU hotplug

commit 03bd4e1f7265548832a76e7919a81f3137c44fd1 upstream.

The following bug can be triggered by hot adding and removing a large number of
xen domain0's vcpus repeatedly:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group
PGD 5a9d5067 PUD 13067 PMD 0
Oops: 0000 [#3] SMP
[...]
Call Trace:
load_balance
? _raw_spin_unlock_irqrestore
idle_balance
__schedule
schedule
schedule_timeout
? lock_timer_base
schedule_timeout_uninterruptible
msleep
lock_device_hotplug_sysfs
online_store
dev_attr_store
sysfs_write_file
vfs_write
SyS_write
system_call_fastpath

Last level cache shared mask is built during CPU up and the
build_sched_domain() routine takes advantage of it to setup
the sched domain CPU topology.

However, llc_shared_mask is not released during CPU disable,
which leads to an invalid sched domainCPU topology.

This patch fix it by releasing the llc_shared_mask correctly
during CPU disable.

Yasuaki also reported that this can happen on real hardware:

  https://lkml.org/lkml/2014/7/22/1018

His case is here:

==
Here is an example on my system.
My system has 4 sockets and each socket has 15 cores and HT is
enabled. In this case, each core of sockes is numbered as
follows:

 | CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
Socket#2 | 30-44, 90-104
Socket#3 | 45-59, 105-119

Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000.

It means that last level cache of Socket#2 is shared with
CPU#30-44 and 90-104.

When hot-removing socket#2 and #3, each core of sockets is
numbered as follows:

 | CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89

But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30
remains having 0x3fff80000001fffc0000000.

After that, when hot-adding socket#2 and #3, each core of
sockets is numbered as follows:

 | CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
Socket#2 | 30-59
Socket#3 | 90-119

Then llc_shared_mask of CPU#30 becomes
0x3fff8000fffffffc0000000. It means that last level cache of
Socket#2 is shared with CPU#30-59 and 90-104. So the mask has
the wrong value.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: Linn Crosetto <linn@hp.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoparisc: Only use -mfast-indirect-calls option for 32-bit kernel builds
John David Anglin [Tue, 23 Sep 2014 00:54:50 +0000 (20:54 -0400)]
parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds

commit d26a7730b5874a5fa6779c62f4ad7c5065a94723 upstream.

In spite of what the GCC manual says, the -mfast-indirect-calls has
never been supported in the 64-bit parisc compiler. Indirect calls have
always been done using function descriptors irrespective of the
-mfast-indirect-calls option.

Recently, it was noticed that a function descriptor was always requested
when the -mfast-indirect-calls option was specified. This caused
problems when the option was used in  application code and doesn't make
any sense because the whole point of the option is to avoid using a
function descriptor for indirect calls.

Fixing this broke 64-bit kernel builds.

I will fix GCC but for now we need the attached change. This results in
the same kernel code as before.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoFix nasty 32-bit overflow bug in buffer i/o code.
Anton Altaparmakov [Mon, 22 Sep 2014 00:53:03 +0000 (01:53 +0100)]
Fix nasty 32-bit overflow bug in buffer i/o code.

commit f2d5a94436cc7cc0221b9a81bba2276a25187dd3 upstream.

On 32-bit architectures, the legacy buffer_head functions are not always
handling the sector number with the proper 64-bit types, and will thus
fail on 4TB+ disks.

Any code that uses __getblk() (and thus bread(), breadahead(),
sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit
block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop
in __getblk_slow() with an infinite stream of errors logged to dmesg
like this:

  __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648
  b_state=0x00000020, b_size=512
  device sda1 blocksize: 512

Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the
top 32-bits are missing (in this case the 0x1 at the top).

This is because grow_dev_page() is broken and has a 32-bit overflow due
to shifting the page index value (a pgoff_t - which is just 32 bits on
32-bit architectures) left-shifted as the block number.  But the top
bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit
before the shift.

This patch fixes this issue by type casting "index" to sector_t before
doing the left shift.

Note this is not a theoretical bug but has been seen in the field on a
4TiB hard drive with logical sector size 512 bytes.

This patch has been verified to fix the infinite loop problem on 3.17-rc5
kernel using a 4TB disk image mounted using "-o loop".  Without this patch
doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop
100% reproducibly whilst with the patch it works fine as expected.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoALSA: pcm: fix fifo_size frame calculation
Clemens Ladisch [Sun, 21 Sep 2014 20:50:57 +0000 (22:50 +0200)]
ALSA: pcm: fix fifo_size frame calculation

commit a9960e6a293e6fc3ed414643bb4e4106272e4d0a upstream.

The calculated frame size was wrong because snd_pcm_format_physical_width()
actually returns the number of bits, not bytes.

Use snd_pcm_format_size() instead, which not only returns bytes, but also
simplifies the calculation.

Fixes: 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling")
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agocan: at91_can: add missing prepare and unprepare of the clock
David Dueck [Wed, 17 Sep 2014 12:26:48 +0000 (14:26 +0200)]
can: at91_can: add missing prepare and unprepare of the clock

commit e77980e50bc2850599d4d9c0192b67a9ffd6daac upstream.

In order to make the driver work with the common clock framework, this patch
converts the clk_enable()/clk_disable() to
clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing
error handling.

Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agocan: flexcan: put TX mailbox into TX_INACTIVE mode after tx-complete
Marc Kleine-Budde [Tue, 16 Sep 2014 13:31:27 +0000 (15:31 +0200)]
can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-complete

commit de5944883ebbedbf5adc8497659772f5da7b7d72 upstream.

After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid
side effects when the RX-FIFO is full, this patch puts the TX mailbox into
TX_INACTIVE mode in the transmission complete interrupt handler. This, of
course, leaves a race window between the actual completion of the transmission
and the handling of tx-complete interrupt. However this is the best we can do
without busy polling the tx complete interrupt.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agocan: flexcan: implement workaround for errata ERR005829
David Jander [Wed, 3 Sep 2014 14:47:22 +0000 (16:47 +0200)]
can: flexcan: implement workaround for errata ERR005829

commit 25e924450fcb23c11c07c95ea8964dd9f174652e upstream.

This patch implements the workaround mentioned in ERR005829:

    ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to
    be transmitted in a specific moment during the arbitration process.

Workaround: The workaround consists of two extra steps after setting up a
message for transmission:

Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000).
If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the
first valid mailbox can be found using the "RX FIFO filters" table in the
FlexCAN chapter of the chip reference manual.

Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agocan: flexcan: correctly initialize mailboxes
David Jander [Wed, 27 Aug 2014 09:58:05 +0000 (11:58 +0200)]
can: flexcan: correctly initialize mailboxes

commit fc05b884a31dbf259cc73cc856e634ec3acbebb6 upstream.

Apparently mailboxes may contain random data at startup, causing some of them
being prepared for message reception. This causes overruns being missed or even
confusing the IRQ check for trasmitted messages, increasing the transmit
counter instead of the error counter.

This patch initializes all mailboxes after the FIFO as RX_INACTIVE.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agocan: flexcan: mark TX mailbox as TX_INACTIVE
Marc Kleine-Budde [Tue, 16 Sep 2014 10:39:28 +0000 (12:39 +0200)]
can: flexcan: mark TX mailbox as TX_INACTIVE

commit c32fe4ad3e4861b2bfa1f44114c564935a123dda upstream.

This patch fixes the initialization of the TX mailbox. It is now correctly
initialized as TX_INACTIVE not RX_EMPTY.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agonl80211: clear skb cb before passing to netlink
Johannes Berg [Wed, 30 Jul 2014 12:55:26 +0000 (14:55 +0200)]
nl80211: clear skb cb before passing to netlink

commit bd8c78e78d5011d8111bc2533ee73b13a3bd6c42 upstream.

In testmode and vendor command reply/event SKBs we use the
skb cb data to store nl80211 parameters between allocation
and sending. This causes the code for CONFIG_NETLINK_MMAP
to get confused, because it takes ownership of the skb cb
data when the SKB is handed off to netlink, and it doesn't
explicitly clear it.

Clear the skb cb explicitly when we're done and before it
gets passed to netlink to avoid this issue.

Reported-by: Assaf Azulay <assaf.azulay@intel.com>
Reported-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
Mark [Wed, 17 Sep 2014 18:15:43 +0000 (19:15 +0100)]
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters

commit c80b4495c61636edc58fe1ce300f09f24db28e10 upstream.

This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB-
SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The
US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI
chain to be accessed. Without it only the (single) device with SCSI ID 0
can be used.

The standalone converter sold by Entrega had model number U1-SC25. Xircom
acquired Entrega and re-branded the product line PortGear. The PortGear USB
to SCSI Converter (model PGSCSI) is internally identical to the Entrega
product, but later models may use a different USB ID. The Entrega-branded
units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and
Macintosh drivers also support 085A:0028.

Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac
(8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as
a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may
have initially used the same ID as the standalone U1-SC25 (1645:0007), but
later production used 085A:0026.

My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133
probably also exist.

This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows
driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I
couldn't find any mention of that actually existing in the wild; perhaps it
was cancelled before release?

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
Mark [Tue, 16 Sep 2014 15:51:41 +0000 (16:51 +0100)]
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter

commit b6a3ed677991558ce09046397a7c4d70530d15b3 upstream.

Hi,

The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g.
iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM
Microsystems chips. Only the connectors differ; both have the same USB ID.
The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other
than 0.

I don't have one of these, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the products use.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
Mark [Tue, 16 Sep 2014 15:22:50 +0000 (16:22 +0100)]
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter

commit 67d365a57a51fb9dece6a5ceb504aa381cae1e5b upstream.

The Adaptec USBConnect 2000 is another SCSI-USB converter which uses
Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is
required to use SCSI devices with ID other than 0.

I don't have a USBConnect 2000, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the product uses.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agolibiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
Mike Christie [Wed, 3 Sep 2014 05:00:39 +0000 (00:00 -0500)]
libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu

commit db9bfd64b14a3a8f1868d2164518fdeab1b26ad1 upstream.

This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.

This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.html

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoNFSv4: Fix another bug in the close/open_downgrade code
Trond Myklebust [Thu, 18 Sep 2014 15:51:32 +0000 (11:51 -0400)]
NFSv4: Fix another bug in the close/open_downgrade code

commit cd9288ffaea4359d5cfe2b8d264911506aed26a4 upstream.

James Drew reports another bug whereby the NFS client is now sending
an OPEN_DOWNGRADE in a situation where it should really have sent a
CLOSE: the client is opening the file for O_RDWR, but then trying to
do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec.

Reported-by: James Drews <drews@engr.wisc.edu>
Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu
Fixes: aee7af356e15 (NFSv4: Fix problems with close in the presence...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoiscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
Joern Engel [Tue, 2 Sep 2014 21:49:54 +0000 (17:49 -0400)]
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure

commit 8ae757d09c45102b347a1bc2867f54ffc1ab8fda upstream.

In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.

Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.

Found by coverity.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoiscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
Nicholas Bellinger [Wed, 17 Sep 2014 18:45:17 +0000 (11:45 -0700)]
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid

commit b53b0d99d6fbf7d44330395349a895521cfdbc96 upstream.

This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.

This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.

Reported-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agobe careful with nd->inode in path_init() and follow_dotdot_rcu()
Al Viro [Sun, 14 Sep 2014 01:59:43 +0000 (21:59 -0400)]
be careful with nd->inode in path_init() and follow_dotdot_rcu()

commit 4023bfc9f351a7994fb6a7d515476c320f94a574 upstream.

in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agovfs: Fold follow_mount_rcu() into follow_dotdot_rcu()
Ben Hutchings [Sun, 19 Oct 2014 22:07:02 +0000 (23:07 +0100)]
vfs: Fold follow_mount_rcu() into follow_dotdot_rcu()

This is needed before commit 4023bfc9f351 ('be careful with nd->inode
in path_init() and follow_dotdot_rcu()').  A similar change was made
upstream as part of commit b37199e626b3 ('rcuwalk: recheck mount_lock
after mountpoint crossing attempts').

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agodon't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
Al Viro [Sun, 14 Sep 2014 01:55:46 +0000 (21:55 -0400)]
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()

commit 7bd88377d482e1eae3c5329b12e33cfd664fa6a9 upstream.

return the value instead, and have path_init() do the assignment.  Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination.  This one should go where
it went.

To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers.  And do the same to set_root(), to keep them
in sync.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoalarmtimer: Lock k_itimer during timer callback
Richard Larocque [Wed, 10 Sep 2014 01:31:05 +0000 (18:31 -0700)]
alarmtimer: Lock k_itimer during timer callback

commit 474e941bed9262f5fa2394f9a4a67e24499e5926 upstream.

Locks the k_itimer's it_lock member when handling the alarm timer's
expiry callback.

The regular posix timers defined in posix-timers.c have this lock held
during timout processing because their callbacks are routed through
posix_timer_fn().  The alarm timers follow a different path, so they
ought to grab the lock somewhere else.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sharvil Nanavati <sharvil@google.com>
Signed-off-by: Richard Larocque <rlarocque@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoalarmtimer: Do not signal SIGEV_NONE timers
Richard Larocque [Wed, 10 Sep 2014 01:31:04 +0000 (18:31 -0700)]
alarmtimer: Do not signal SIGEV_NONE timers

commit 265b81d23a46c39df0a735a3af4238954b41a4c2 upstream.

Avoids sending a signal to alarm timers created with sigev_notify set to
SIGEV_NONE by checking for that special case in the timeout callback.

The regular posix timers avoid sending signals to SIGEV_NONE timers by
not scheduling any callbacks for them in the first place.  Although it
would be possible to do something similar for alarm timers, it's simpler
to handle this as a special case in the timeout.

Prior to this patch, the alarm timer would ignore the sigev_notify value
and try to deliver signals to the process anyway.  Even worse, the
sanity check for the value of sigev_signo is skipped when SIGEV_NONE was
specified, so the signal number could be bogus.  If sigev_signo was an
unitialized value (as it often would be if SIGEV_NONE is used), then
it's hard to predict which signal will be sent.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sharvil Nanavati <sharvil@google.com>
Signed-off-by: Richard Larocque <rlarocque@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoalarmtimer: Return relative times in timer_gettime
Richard Larocque [Wed, 10 Sep 2014 01:31:03 +0000 (18:31 -0700)]
alarmtimer: Return relative times in timer_gettime

commit e86fea764991e00a03ff1e56409ec9cacdbda4c9 upstream.

Returns the time remaining for an alarm timer, rather than the time at
which it is scheduled to expire.  If the timer has already expired or it
is not currently scheduled, the it_value's members are set to zero.

This new behavior matches that of the other posix-timers and the POSIX
specifications.

This is a change in user-visible behavior, and may break existing
applications.  Hopefully, few users rely on the old incorrect behavior.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sharvil Nanavati <sharvil@google.com>
Signed-off-by: Richard Larocque <rlarocque@google.com>
[jstultz: minor style tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
[bwh: Backported to 3.2: Add definition of alarm_expires_remaining() from
 commit 6cffe00f7d4e ('alarmtimer: Add functions for timerfd support')]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agojiffies: Fix timeval conversion to jiffies
Andrew Hunter [Thu, 4 Sep 2014 21:17:16 +0000 (14:17 -0700)]
jiffies: Fix timeval conversion to jiffies

commit d78c9300c51d6ceed9f6d078d4e9366f259de28c upstream.

timeval_to_jiffies tried to round a timeval up to an integral number
of jiffies, but the logic for doing so was incorrect: intervals
corresponding to exactly N jiffies would become N+1. This manifested
itself particularly repeatedly stopping/starting an itimer:

setitimer(ITIMER_PROF, &val, NULL);
setitimer(ITIMER_PROF, NULL, &val);

would add a full tick to val, _even if it was exactly representable in
terms of jiffies_ (say, the result of a previous rounding.)  Doing
this repeatedly would cause unbounded growth in val.  So fix the math.

Here's what was wrong with the conversion: we essentially computed
(eliding seconds)

jiffies = usec  * (NSEC_PER_USEC/TICK_NSEC)

by using scaling arithmetic, which took the best approximation of
NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC =
x/(2^USEC_JIFFIE_SC), and computed:

jiffies = (usec * x) >> USEC_JIFFIE_SC

and rounded this calculation up in the intermediate form (since we
can't necessarily exactly represent TICK_NSEC in usec.) But the
scaling arithmetic is a (very slight) *over*approximation of the true
value; that is, instead of dividing by (1 usec/ 1 jiffie), we
effectively divided by (1 usec/1 jiffie)-epsilon (rounding
down). This would normally be fine, but we want to round timeouts up,
and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this
would be fine if our division was exact, but dividing this by the
slightly smaller factor was equivalent to adding just _over_ 1 to the
final result (instead of just _under_ 1, as desired.)

In particular, with HZ=1000, we consistently computed that 10000 usec
was 11 jiffies; the same was true for any exact multiple of
TICK_NSEC.

We could possibly still round in the intermediate form, adding
something less than 2^USEC_JIFFIE_SC - 1, but easier still is to
convert usec->nsec, round in nanoseconds, and then convert using
time*spec*_to_jiffies.  This adds one constant multiplication, and is
not observably slower in microbenchmarks on recent x86 hardware.

Tested: the following program:

int main() {
  struct itimerval zero = {{0, 0}, {0, 0}};
  /* Initially set to 10 ms. */
  struct itimerval initial = zero;
  initial.it_interval.tv_usec = 10000;
  setitimer(ITIMER_PROF, &initial, NULL);
  /* Save and restore several times. */
  for (size_t i = 0; i < 10; ++i) {
    struct itimerval prev;
    setitimer(ITIMER_PROF, &zero, &prev);
    /* on old kernels, this goes up by TICK_USEC every iteration */
    printf("previous value: %ld %ld %ld %ld\n",
           prev.it_interval.tv_sec, prev.it_interval.tv_usec,
           prev.it_value.tv_sec, prev.it_value.tv_usec);
    setitimer(ITIMER_PROF, &prev, NULL);
  }
    return 0;
}

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Turner <pjt@google.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Paul Turner <pjt@google.com>
Reported-by: Aaron Jacobs <jacobsa@google.com>
Signed-off-by: Andrew Hunter <ahh@google.com>
[jstultz: Tweaked to apply to 3.17-rc]
Signed-off-by: John Stultz <john.stultz@linaro.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agofutex: Unlock hb->lock in futex_wait_requeue_pi() error path
Thomas Gleixner [Thu, 11 Sep 2014 21:44:35 +0000 (23:44 +0200)]
futex: Unlock hb->lock in futex_wait_requeue_pi() error path

commit 13c42c2f43b19aab3195f2d357db00d1e885eaa8 upstream.

futex_wait_requeue_pi() calls futex_wait_setup(). If
futex_wait_setup() succeeds it returns with hb->lock held and
preemption disabled. Now the sanity check after this does:

        if (match_futex(&q.key, &key2)) {
    ret = -EINVAL;
goto out_put_keys;
}

which releases the keys but does not release hb->lock.

So we happily return to user space with hb->lock held and therefor
preemption disabled.

Unlock hb->lock before taking the exit route.

Reported-by: Dave "Trinity" Jones <davej@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409112318500.4178@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2: queue_unlock() takes two parameters]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoInput: i8042 - add nomux quirk for Avatar AVIU-145A6
Hans de Goede [Thu, 11 Sep 2014 17:10:26 +0000 (10:10 -0700)]
Input: i8042 - add nomux quirk for Avatar AVIU-145A6

commit d2682118f4bb3ceb835f91c1a694407a31bb7378 upstream.

The sys_vendor / product_name are somewhat generic unfortunately, so this
may lead to some false positives. But nomux usually does no harm, where as
not having it clearly is causing problems on the Avatar AVIU-145A6.

https://bugzilla.kernel.org/show_bug.cgi?id=77391

Reported-by: Hugo P <saurosii@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoInput: i8042 - add Fujitsu U574 to no_timeout dmi table
Hans de Goede [Wed, 10 Sep 2014 20:53:37 +0000 (13:53 -0700)]
Input: i8042 - add Fujitsu U574 to no_timeout dmi table

commit cc18a69c92d0972bc2fc5a047ee3be1e8398171b upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=69731

Reported-by: Jason Robinson <mail@jasonrobinson.me>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoxhci: Fix null pointer dereference if xhci initialization fails
Mathias Nyman [Thu, 11 Sep 2014 10:55:48 +0000 (13:55 +0300)]
xhci: Fix null pointer dereference if xhci initialization fails

commit c207e7c50f31113c24a9f536fcab1e8a256985d7 upstream.

If xhci initialization fails before the roothub bandwidth
domains (xhci->rh_bw[i]) are allocated it will oops when
trying to access rh_bw members in xhci_mem_cleanup().

Reported-by: Manuel Reimer <manuel.reimer@gmx.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agostorage: Add single-LUN quirk for Jaz USB Adapter
Mark [Thu, 11 Sep 2014 12:15:45 +0000 (13:15 +0100)]
storage: Add single-LUN quirk for Jaz USB Adapter

commit c66f1c62e85927357e7b3f4c701614dcb5c498a2 upstream.

The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware
seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/
SCM chip set. However its firmware restricts it to only work with Jaz
drives.

On connecting the cable a message like this appears four times in the log:
 reset full speed USB device number 4 using uhci_hcd

That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agousb: hub: take hub->hdev reference when processing from eventlist
Joe Lawrence [Wed, 10 Sep 2014 19:07:50 +0000 (15:07 -0400)]
usb: hub: take hub->hdev reference when processing from eventlist

commit c605f3cdff53a743f6d875b76956b239deca1272 upstream.

During surprise device hotplug removal tests, it was observed that
hub_events may try to call usb_lock_device on a device that has already
been freed. Protect the usb_device by taking out a reference (under the
hub_event_lock) when hub_events pulls it off the list, returning the
reference after hub_events is finished using it.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref
Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoInput: serport - add compat handling for SPIOCSTYPE ioctl
John Sung [Tue, 9 Sep 2014 17:06:51 +0000 (10:06 -0700)]
Input: serport - add compat handling for SPIOCSTYPE ioctl

commit a80d8b02751060a178bb1f7a6b7a93645a7a308b upstream.

When running a 32-bit inputattach utility in a 64-bit system, there will be
error code "inputattach: can't set device type". This is caused by the
serport device driver not supporting compat_ioctl, so that SPIOCSTYPE ioctl
fails.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agolibceph: do not hard code max auth ticket len
Ilya Dryomov [Tue, 9 Sep 2014 15:39:15 +0000 (19:39 +0400)]
libceph: do not hard code max auth ticket len

commit c27a3e4d667fdcad3db7b104f75659478e0c68d8 upstream.

We hard code cephx auth ticket buffer size to 256 bytes.  This isn't
enough for any moderate setups and, in case tickets themselves are not
encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but
ceph_decode_copy() doesn't - it's just a memcpy() wrapper).  Since the
buffer is allocated dynamically anyway, allocated it a bit later, at
the point where we know how much is going to be needed.

Fixes: http://tracker.ceph.com/issues/8979

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agolibceph: add process_one_ticket() helper
Ilya Dryomov [Mon, 8 Sep 2014 13:25:34 +0000 (17:25 +0400)]
libceph: add process_one_ticket() helper

commit 597cda357716a3cf8d994cb11927af917c8d71fa upstream.

Add a helper for processing individual cephx auth tickets.  Needed for
the next commit, which deals with allocating ticket buffers.  (Most of
the diff here is whitespace - view with git diff -b).

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agolibceph: gracefully handle large reply messages from the mon
Sage Weil [Mon, 4 Aug 2014 14:01:54 +0000 (07:01 -0700)]
libceph: gracefully handle large reply messages from the mon

commit 73c3d4812b4c755efeca0140f606f83772a39ce4 upstream.

We preallocate a few of the message types we get back from the mon.  If we
get a larger message than we are expecting, fall back to trying to allocate
a new one instead of blindly using the one we have.

Signed-off-by: Sage Weil <sage@redhat.com>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agolibceph: rename ceph_msg::front_max to front_alloc_len
Ilya Dryomov [Thu, 9 Jan 2014 18:08:21 +0000 (20:08 +0200)]
libceph: rename ceph_msg::front_max to front_alloc_len

commit 3cea4c3071d4e55e9d7356efe9d0ebf92f0c2204 upstream.

Rename front_max field of struct ceph_msg to front_alloc_len to make
its purpose more clear.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoInput: synaptics - add support for ForcePads
Dmitry Torokhov [Sat, 30 Aug 2014 20:51:06 +0000 (13:51 -0700)]
Input: synaptics - add support for ForcePads

commit 5715fc764f7753d464dbe094b5ef9cffa6e479a4 upstream.

ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of
physical buttons, instead they generate primary button click when user
presses somewhat hard on the surface of the touchpad. Unfortunately they
also report primary button click whenever there are 2 or more contacts
on the pad, messing up all multi-finger gestures (2-finger scrolling,
multi-finger tapping, etc). To cope with this behavior we introduce a
delay (currently 50 msecs) in reporting primary press in case more
contacts appear.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoperf: Fix a race condition in perf_remove_from_context()
Cong Wang [Tue, 2 Sep 2014 22:27:20 +0000 (15:27 -0700)]
perf: Fix a race condition in perf_remove_from_context()

commit 3577af70a2ce4853d58e57d832e687d739281479 upstream.

We saw a kernel soft lockup in perf_remove_from_context(),
it looks like the `perf` process, when exiting, could not go
out of the retry loop. Meanwhile, the target process was forking
a child. So either the target process should execute the smp
function call to deactive the event (if it was running) or it should
do a context switch which deactives the event.

It seems we optimize out a context switch in perf_event_context_sched_out(),
and what's more important, we still test an obsolete task pointer when
retrying, so no one actually would deactive that event in this situation.
Fix it directly by reloading the task pointer in perf_remove_from_context().

This should cure the above soft lockup.

Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409696840-843-1-git-send-email-xiyou.wangcong@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agouwb: init beacon cache entry before registering uwb device
Thomas Pugliese [Thu, 7 Aug 2014 20:45:35 +0000 (15:45 -0500)]
uwb: init beacon cache entry before registering uwb device

commit 675f0ab2fe5a0f7325208e60b617a5f32b86d72c upstream.

Make sure the uwb_dev->bce entry is set before calling uwb_dev_add in
uwbd_dev_onair so that usermode will only see the device after it is
properly initialized.  This fixes a kernel panic that can occur if
usermode tries to access the IEs sysfs attribute of a UWB device before
the driver has had a chance to set the beacon cache entry.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device
Taylor Braun-Jones [Thu, 7 Aug 2014 18:25:06 +0000 (14:25 -0400)]
USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device

commit 9c491c372d677b6420e0f8c6361fe422791662cc upstream.

Signed-off-by: Taylor Braun-Jones <taylor.braun-jones@ge.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoInput: elantech - fix detection of touchpad on ASUS s301l
Hans de Goede [Mon, 8 Sep 2014 21:39:52 +0000 (14:39 -0700)]
Input: elantech - fix detection of touchpad on ASUS s301l

commit 271329b3c798b2102120f5df829071c211ef00ed upstream.

Adjust Elantech signature validation to account fo rnewer models of
touchpads.

Reported-and-tested-by: Màrius Monton <marius.monton@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agousb: host: xhci: fix compliance mode workaround
Felipe Balbi [Wed, 27 Aug 2014 21:38:04 +0000 (16:38 -0500)]
usb: host: xhci: fix compliance mode workaround

commit 96908589a8b2584b1185f834d365f5cc360e8226 upstream.

Commit 71c731a (usb: host: xhci: Fix Compliance Mode
on SN65LVP3502CP Hardware) implemented a workaround
for a known issue with Texas Instruments' USB 3.0
redriver IC but it left a condition where any xHCI
host would be taken out of reset if port was placed
in compliance mode and there was no device connected
to the port.

That condition would trigger a fake connection to a
non-existent device so that usbcore would trigger a
warm reset of the port, thus taking the link out of
reset.

This has the side-effect of preventing any xHCI host
connected to a Linux machine from starting and running
the USB 3.0 Electrical Compliance Suite because the
port will mysteriously taken out of compliance mode
and, thus, xHCI won't step through the necessary
compliance patterns for link validation.

This patch fixes the issue by just adding a missing
check for XHCI_COMP_MODE_QUIRK inside
xhci_hub_report_usb3_link_state() when PORT_CAS isn't
set.

This patch should be backported to all kernels containing
commit 71c731a.

Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware)
Cc: Alexis R. Cortes <alexis.cortes@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - s/xhci_hub_report_usb3_link_state/xhci_hub_report_link_state/
 - s/raw_port_status/temp/
 - Adjust indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agodrm/radeon: add connector quirk for fujitsu board
Alex Deucher [Mon, 8 Sep 2014 17:55:51 +0000 (13:55 -0400)]
drm/radeon: add connector quirk for fujitsu board

commit 1952f24d0fa6292d65f886887af87ba8ac79b3ba upstream.

Vbios connector table lists non-existent VGA port.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83184

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoahci: add pcid for Marvel 0x9182 controller
Murali Karicheri [Fri, 5 Sep 2014 17:21:00 +0000 (13:21 -0400)]
ahci: add pcid for Marvel 0x9182 controller

commit c5edfff9db6f4d2c35c802acb4abe0df178becee upstream.

Keystone K2E EVM uses Marvel 0x9182 controller. This requires support
for the ID in the ahci driver.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agousb: dwc3: core: fix order of PM runtime calls
Felipe Balbi [Tue, 2 Sep 2014 19:57:20 +0000 (14:57 -0500)]
usb: dwc3: core: fix order of PM runtime calls

commit fed33afce0eda44a46ae24d93aec1b5198c0bac4 upstream.

Currently, we disable pm_runtime before all register
accesses are done, this is dangerous and might lead
to abort exceptions due to the driver trying to access
a register which is clocked by a clock which was long
gated.

Fix that by moving pm_runtime_put_sync() and pm_runtime_disable()
as the last thing we do before returning from our ->remove()
method.

Fixes: 72246da (usb: Introduce DesignWare USB3 DRD Driver)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agousb: dwc3: core: use pm_runtime_put_sync() on remove
Felipe Balbi [Fri, 11 Oct 2013 13:34:28 +0000 (08:34 -0500)]
usb: dwc3: core: use pm_runtime_put_sync() on remove

commit 16b972a592ea2c9a3c2a3c12238de650fd4043a9 upstream.

We are going to disable runtime_pm and we're
removing the driver, we must disable the device
now.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock
Jiri Kosina [Wed, 3 Sep 2014 13:04:28 +0000 (15:04 +0200)]
ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock

commit 6726655dfdd2dc60c035c690d9f10cb69d7ea075 upstream.

There is a following AB-BA dependency between cpu_hotplug.lock and
cpuidle_lock:

1) cpu_hotplug.lock -> cpuidle_lock
enable_nonboot_cpus()
 _cpu_up()
  cpu_hotplug_begin()
   LOCK(cpu_hotplug.lock)
 cpu_notify()
  ...
  acpi_processor_hotplug()
   cpuidle_pause_and_lock()
    LOCK(cpuidle_lock)

2) cpuidle_lock -> cpu_hotplug.lock
acpi_os_execute_deferred() workqueue
 ...
 acpi_processor_cst_has_changed()
  cpuidle_pause_and_lock()
   LOCK(cpuidle_lock)
  get_online_cpus()
   LOCK(cpu_hotplug.lock)

Fix this by reversing the order acpi_processor_cst_has_changed() does
thigs -- let it first execute the protection against CPU hotplug by
calling get_online_cpus() and obtain the cpuidle lock only after that (and
perform the symmentric change when allowing CPUs hotplug again and
dropping cpuidle lock).

Spotted by lockdep.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoblock: Fix dev_t minor allocation lifetime
Keith Busch [Tue, 26 Aug 2014 15:05:36 +0000 (09:05 -0600)]
block: Fix dev_t minor allocation lifetime

commit 2da78092dda13f1efd26edbbf99a567776913750 upstream.

Releases the dev_t minor when all references are closed to prevent
another device from acquiring the same major/minor.

Since the partition's release may be invoked from call_rcu's soft-irq
context, the ext_dev_idr's mutex had to be replaced with a spinlock so
as not so sleep.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
[bwh: Backported to 3.2:
 - Adjust filename
 - idr insertion API is different, and blk_alloc_devt() is preallocating
   a node in a different way]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoaio: add missing smp_rmb() in read_events_ring
Jeff Moyer [Tue, 2 Sep 2014 17:17:00 +0000 (13:17 -0400)]
aio: add missing smp_rmb() in read_events_ring

commit 2ff396be602f10b5eab8e73b24f20348fa2de159 upstream.

We ran into a case on ppc64 running mariadb where io_getevents would
return zeroed out I/O events.  After adding instrumentation, it became
clear that there was some missing synchronization between reading the
tail pointer and the events themselves.  This small patch fixes the
problem in testing.

Thanks to Zach for helping to look into this, and suggesting the fix.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoxen/manage: Always freeze/thaw processes when suspend/resuming
Ross Lagerwall [Mon, 18 Aug 2014 09:41:36 +0000 (10:41 +0100)]
xen/manage: Always freeze/thaw processes when suspend/resuming

commit 61a734d305e16944b42730ef582a7171dc733321 upstream.

Always freeze processes when suspending and thaw processes when resuming
to prevent a race noticeable with HVM guests.

This prevents a deadlock where the khubd kthread (which is designed to
be freezable) acquires a usb device lock and then tries to allocate
memory which requires the disk which hasn't been resumed yet.
Meanwhile, the xenwatch thread deadlocks waiting for the usb device
lock.

Freezing processes fixes this because the khubd thread is only thawed
after the xenwatch thread finishes resuming all the devices.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoALSA: hda - Fix COEF setups for ALC1150 codec
Takashi Iwai [Tue, 2 Sep 2014 05:21:56 +0000 (07:21 +0200)]
ALSA: hda - Fix COEF setups for ALC1150 codec

commit acf08081adb5e8fe0519eb97bb49797ef52614d6 upstream.

ALC1150 codec seems to need the COEF- and PLL-setups just like its
compatible ALC882 codec.  Some machines (e.g. SunMicro X10SAT) show
the problem like too low output volumes unless the COEF setup is
applied.

Reported-and-tested-by: Dana Goyette <danagoyette@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agodrm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
Thomas Hellstrom [Thu, 28 Aug 2014 09:53:23 +0000 (11:53 +0200)]
drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle

commit f01ea0c3d9db536c64d47922716d8b3b8f21d850 upstream.

The code waiting for fifo idle was incorrect and could possibly spin
forever under certain circumstances.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reported-by: Mark Sheldon <markshel@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reivewed-by: Mark Sheldon <markshel@vmware.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: sierra: add 1199:68AA device ID
Bjørn Mork [Thu, 28 Aug 2014 13:08:16 +0000 (15:08 +0200)]
USB: sierra: add 1199:68AA device ID

commit 5b3da69285c143b7ea76b3b9f73099ff1093ab73 upstream.

This VID:PID is used for some Direct IP devices behaving
identical to the already supported 0F3D:68AA devices.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: sierra: avoid CDC class functions on "68A3" devices
Bjørn Mork [Thu, 28 Aug 2014 12:11:23 +0000 (14:11 +0200)]
USB: sierra: avoid CDC class functions on "68A3" devices

commit 049255f51644c1105775af228396d187402a5934 upstream.

Sierra Wireless Direct IP devices using the 68A3 product ID
can be configured for modes including a CDC ECM class function.
The known example uses interface numbers 12 and 13 for the ECM
control and data interfaces respectively, consistent with CDC
MBIM function interface numbering on other Sierra devices.

It seems cleaner to restrict this driver to the ff/ff/ff
vendor specific interfaces rather than increasing the already
long interface number blacklist.  This should be more future
proof if Sierra adds more class functions using interface
numbers not yet in the blacklist.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoUSB: ftdi_sio: add support for NOVITUS Bono E thermal printer
Johan Hovold [Mon, 18 Aug 2014 16:33:11 +0000 (18:33 +0200)]
USB: ftdi_sio: add support for NOVITUS Bono E thermal printer

commit ee444609dbae8afee420c3243ce4c5f442efb622 upstream.

Add device id for NOVITUS Bono E thermal printer.

Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoRevert "iwlwifi: dvm: don't enable CTS to self"
Emmanuel Grumbach [Sun, 31 Aug 2014 19:11:11 +0000 (22:11 +0300)]
Revert "iwlwifi: dvm: don't enable CTS to self"

commit f47f46d7b09cf1d09e4b44b6cc4dd7d68a08028c upstream.

This reverts commit 43d826ca5979927131685cc2092c7ce862cb91cd.

This commit caused packet loss.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[bwh: Backported to 3.2:
 - Adjust filename
 - Condition for RXON_FLG_SELF_CTS_EN in iwlagn_commit_rxon() was different]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoata_piix: Add Device IDs for Intel 9 Series PCH
James Ralston [Wed, 27 Aug 2014 21:31:58 +0000 (14:31 -0700)]
ata_piix: Add Device IDs for Intel 9 Series PCH

commit 6cad1376954e591c3c41500c4e586e183e7ffe6d upstream.

This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoahci: Add Device IDs for Intel 9 Series PCH
James Ralston [Wed, 27 Aug 2014 21:29:07 +0000 (14:29 -0700)]
ahci: Add Device IDs for Intel 9 Series PCH

commit 1b071a0947dbce5c184c12262e02540fbc493457 upstream.

This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agodrm/i915: Remove bogus __init annotation from DMI callbacks
Mathias Krause [Wed, 27 Aug 2014 16:41:19 +0000 (18:41 +0200)]
drm/i915: Remove bogus __init annotation from DMI callbacks

commit bbe1c2740d3a25aa1dbe5d842d2ff09cddcdde0a upstream.

The __init annotations for the DMI callback functions are wrong as this
code can be called even after the module has been initialized, e.g. like
this:

  # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove
  # modprobe i915
  # echo 1 > /sys/bus/pci/rescan

The first command will remove the PCI device from the kernel's device
list so the second command won't see it right away. But as it registers
a PCI driver it'll see it on the third command. If the system happens to
match one of the DMI table entries we'll try to call a function in long
released memory and generate an Oops, at best.

Fix this by removing the bogus annotation.

Modpost should have caught that one but it ignores section reference
mismatches from the .rodata section. :/

Fixes: 25e341cfc33d ("drm/i915: quirk away broken OpRegion VBT")
Fixes: 8ca4013d702d ("CHROMIUM: i915: Add DMI override to skip CRT...")
Fixes: 425d244c8670 ("drm/i915: ignore LVDS on intel graphics systems...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed?
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[bwh: Backported to 3.2: drop inapplicable change in intel_crt.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoregmap: Fix handling of volatile registers for format_write() chips
Mark Brown [Tue, 26 Aug 2014 11:12:17 +0000 (12:12 +0100)]
regmap: Fix handling of volatile registers for format_write() chips

commit 5844a8b9d98ec11ce1d77610daacf3f0a0e14715 upstream.

A previous over-zealous factorisation of code means that we only treat
registers as volatile if they are readable. For most devices this is fine
since normally most registers can be read and volatility implies
readability but for format_write() devices where there is no readback from
the hardware and we use volatility to mean simply uncacheability this means
that we end up treating all registers as cacheble.

A bigger refactoring of the code to clarify this is in order but as a fix
make a minimal change and only check readability when checking volatility
if there is no format_write() operation defined for the device.

Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoregmap: if format_write is used, declare all registers as "unreadable"
Wolfram Sang [Mon, 30 Jan 2012 14:08:16 +0000 (15:08 +0100)]
regmap: if format_write is used, declare all registers as "unreadable"

commit 4191f19792bf91267835eb090d970e9cd6277a65 upstream.

Using .format_write means, we have a custom function to write to the
chip, but not to read back. Also, mark registers as "not precious" and
"not volatile" which is implicit because we cannot read them. Make those
functions use 'regmap_readable' to reuse the checks done there.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoMIPS: ZBOOT: add missing <linux/string.h> include
Aurelien Jarno [Sun, 20 Jul 2014 17:58:23 +0000 (19:58 +0200)]
MIPS: ZBOOT: add missing <linux/string.h> include

commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.

Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c)
moved the string related functions into a separate file, which might
cause the following build error, depending on the configuration:

| CC      arch/mips/boot/compressed/decompress.o
| In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0,
|                  from linux/arch/mips/boot/compressed/decompress.c:67:
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp':
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration]
| cc1: some warnings being treated as errors
| linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed
| make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1
| linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed

It does not fail with the standard configuration, as when
CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in
include/linux/dynamic_debug.h. There might be other ways for it to
get indirectly included.

We can't add the include directly in xz_dec_stream.c as some
architectures might want to use a different version for the boot/
directory (see for example arch/x86/boot/string.h).

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7420/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agortlwifi: rtl8192cu: Add new ID
Larry Finger [Sun, 24 Aug 2014 22:49:43 +0000 (17:49 -0500)]
rtlwifi: rtl8192cu: Add new ID

commit c66517165610b911e4c6d268f28d8c640832dbd1 upstream.

The Sitecom WLA-2102 adapter uses this driver.

Reported-by: Nico Baggus <nico-linux@noci.xs4all.nl>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Nico Baggus <nico-linux@noci.xs4all.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoKVM: s390: Fix user triggerable bug in dead code
Christian Borntraeger [Wed, 6 Aug 2014 14:17:58 +0000 (16:17 +0200)]
KVM: s390: Fix user triggerable bug in dead code

commit 614a80e474b227cace52fd6e3c790554db8a396e upstream.

In the early days, we had some special handling for the
KVM_EXIT_S390_SIEIC exit, but this was gone in 2009 with commit
d7b0b5eb3000 (KVM: s390: Make psw available on all exits, not
just a subset).

Now this switch statement is just a sanity check for userspace
not messing with the kvm_run structure. Unfortunately, this
allows userspace to trigger a kernel BUG. Let's just remove
this switch statement.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agocgroup: reject cgroup names with '
Alban Crequy [Mon, 18 Aug 2014 11:20:20 +0000 (12:20 +0100)]
cgroup: reject cgroup names with '
'

commit 71b1fb5c4473a5b1e601d41b109bdfe001ec82e0 upstream.

/proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are
allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely.

Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
[bwh: Backported to 3.2:
 - Adjust context
 - We have to get the name from the dentry pointer]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agopercpu: free percpu allocation info for uniprocessor system
Honggang Li [Tue, 12 Aug 2014 13:36:15 +0000 (21:36 +0800)]
percpu: free percpu allocation info for uniprocessor system

commit 3189eddbcafcc4d827f7f19facbeddec4424eba8 upstream.

Currently, only SMP system free the percpu allocation info.
Uniprocessor system should free it too. For example, one x86 UML
virtual machine with 256MB memory, UML kernel wastes one page memory.

Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agopercpu: perform tlb flush after pcpu_map_pages() failure
Tejun Heo [Fri, 15 Aug 2014 20:06:10 +0000 (16:06 -0400)]
percpu: perform tlb flush after pcpu_map_pages() failure

commit 849f5169097e1ba35b90ac9df76b5bb6f9c0aabd upstream.

If pcpu_map_pages() fails midway, it unmaps the already mapped pages.
Currently, it doesn't flush tlb after the partial unmapping.  This may
be okay in most cases as the established mapping hasn't been used at
that point but it can go wrong and when it goes wrong it'd be
extremely difficult to track down.

Flush tlb after the partial unmapping.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agopercpu: fix pcpu_alloc_pages() failure path
Tejun Heo [Fri, 15 Aug 2014 20:06:06 +0000 (16:06 -0400)]
percpu: fix pcpu_alloc_pages() failure path

commit f0d279654dea22b7a6ad34b9334aee80cda62cde upstream.

When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to
free what has already been allocated.  The invocation is across the
whole requested range and pcpu_free_pages() will try to free all
non-NULL pages; unfortunately, this is incorrect as
pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't
clear the pages array and thus the array may have entries from the
previous invocations making the partial failure path free incorrect
pages.

Fix it by open-coding the partial freeing of the already allocated
pages.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoregulatory: add NUL to alpha2
Eliad Peller [Wed, 11 Jun 2014 07:23:35 +0000 (10:23 +0300)]
regulatory: add NUL to alpha2

commit a5fe8e7695dc3f547e955ad2b662e3e72969e506 upstream.

alpha2 is defined as 2-chars array, but is used in multiple
places as string (e.g. with nla_put_string calls), which
might leak kernel data.

Solve it by simply adding an extra char for the NULL
terminator, making such operations safe.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoLinux 3.2.63
Ben Hutchings [Sat, 13 Sep 2014 22:41:52 +0000 (23:41 +0100)]
Linux 3.2.63

7 years agomicroblaze: Fix makefile to work with latest toolchain
Michal Simek [Mon, 5 Mar 2012 14:53:19 +0000 (15:53 +0100)]
microblaze: Fix makefile to work with latest toolchain

commit 00708d421a22a0f82de2dbb91ca6213b3dcc5267 upstream.

When building with latest binutils, vmlinux includes
some sections which need to be stripped out when building
the binary image.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86/espfix/xen: Fix allocation of pages for paravirt page tables
Boris Ostrovsky [Wed, 9 Jul 2014 17:18:18 +0000 (13:18 -0400)]
x86/espfix/xen: Fix allocation of pages for paravirt page tables

commit 8762e5092828c4dc0f49da5a47a644c670df77f3 upstream.

init_espfix_ap() is currently off by one level when informing hypervisor
that allocated pages will be used for ministacks' page tables.

The most immediate effect of this on a PV guest is that if
'stack_page = __get_free_page()' returns a non-zeroed-out page the hypervisor
will refuse to use it for a page table (which it shouldn't be anyway). This will
result in warnings by both Xen and Linux.

More importantly, a subsequent write to that page (again, by a PV guest) is
likely to result in fatal page fault.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1404926298-5565-1-git-send-email-boris.ostrovsky@oracle.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86_64/entry/xen: Do not invoke espfix64 on Xen
Andy Lutomirski [Wed, 23 Jul 2014 15:34:11 +0000 (08:34 -0700)]
x86_64/entry/xen: Do not invoke espfix64 on Xen

commit 7209a75d2009dbf7745e2fd354abf25c3deb3ca3 upstream.

This moves the espfix64 logic into native_iret.  To make this work,
it gets rid of the native patch for INTERRUPT_RETURN:
INTERRUPT_RETURN on native kernels is now 'jmp native_iret'.

This changes the 16-bit SS behavior on Xen from OOPSing to leaking
some bits of the Xen hypervisor's RSP (I think).

[ hpa: this is a nonzero cost on native, but probably not enough to
  measure. Xen needs to fix this in their own code, probably doing
  something equivalent to espfix64. ]

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86, espfix: Make it possible to disable 16-bit support
H. Peter Anvin [Sun, 4 May 2014 17:36:22 +0000 (10:36 -0700)]
x86, espfix: Make it possible to disable 16-bit support

commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f upstream.

Embedded systems, which may be very memory-size-sensitive, are
extremely unlikely to ever encounter any 16-bit software, so make it
a CONFIG_EXPERT option to turn off support for any 16-bit software
whatsoever.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86, espfix: Make espfix64 a Kconfig option, fix UML
H. Peter Anvin [Sun, 4 May 2014 17:00:49 +0000 (10:00 -0700)]
x86, espfix: Make espfix64 a Kconfig option, fix UML

commit 197725de65477bc8509b41388157c1a2283542bb upstream.

Make espfix64 a hidden Kconfig option.  This fixes the x86-64 UML
build which had broken due to the non-existence of init_espfix_bsp()
in UML: since UML uses its own Kconfig, this option does not appear in
the UML build.

This also makes it possible to make support for 16-bit segments a
configuration option, for the people who want to minimize the size of
the kernel.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86, espfix: Fix broken header guard
H. Peter Anvin [Fri, 2 May 2014 18:33:51 +0000 (11:33 -0700)]
x86, espfix: Fix broken header guard

commit 20b68535cd27183ebd3651ff313afb2b97dac941 upstream.

Header guard is #ifndef, not #ifdef...

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86, espfix: Move espfix definitions into a separate header file
H. Peter Anvin [Thu, 1 May 2014 21:12:23 +0000 (14:12 -0700)]
x86, espfix: Move espfix definitions into a separate header file

commit e1fe9ed8d2a4937510d0d60e20705035c2609aea upstream.

Sparse warns that the percpu variables aren't declared before they are
defined.  Rather than hacking around it, move espfix definitions into
a proper header file.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agox86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack
H. Peter Anvin [Tue, 29 Apr 2014 23:46:09 +0000 (16:46 -0700)]
x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack

commit 3891a04aafd668686239349ea58f3314ea2af86b upstream.

The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  This
causes some 16-bit software to break, but it also leaks kernel state
to user space.  We have a software workaround for that ("espfix") for
the 32-bit kernel, but it relies on a nonzero stack segment base which
is not available in 64-bit mode.

In checkin:

    b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

we "solved" this by forbidding 16-bit segments on 64-bit kernels, with
the logic that 16-bit support is crippled on 64-bit kernels anyway (no
V86 support), but it turns out that people are doing stuff like
running old Win16 binaries under Wine and expect it to work.

This works around this by creating percpu "ministacks", each of which
is mapped 2^16 times 64K apart.  When we detect that the return SS is
on the LDT, we copy the IRET frame to the ministack and use the
relevant alias to return to userspace.  The ministacks are mapped
readonly, so if IRET faults we promote #GP to #DF which is an IST
vector and thus has its own stack; we then do the fixup in the #DF
handler.

(Making #GP an IST exception would make the msr_safe functions unsafe
in NMI/MC context, and quite possibly have other effects.)

Special thanks to:

- Andy Lutomirski, for the suggestion of using very small stack slots
  and copy (as opposed to map) the IRET frame there, and for the
  suggestion to mark them readonly and let the fault promote to #DF.
- Konrad Wilk for paravirt fixup and testing.
- Borislav Petkov for testing help and useful comments.

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Lutomriski <amluto@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dirk Hohndel <dirk@hohndel.org>
Cc: Arjan van de Ven <arjan.van.de.ven@intel.com>
Cc: comex <comexk@gmail.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoRevert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"
H. Peter Anvin [Wed, 21 May 2014 17:22:59 +0000 (10:22 -0700)]
Revert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"

commit 7ed6fb9b5a5510e4ef78ab27419184741169978a upstream.

This reverts commit fa81511bb0bbb2b1aace3695ce869da9762624ff in
preparation of merging in the proper fix (espfix64).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc: use asm-generic version of types.h
Sam Ravnborg [Sun, 31 Mar 2013 07:01:47 +0000 (07:01 +0000)]
sparc: use asm-generic version of types.h

commit cbf1ef6b3345d2cc7e62407eec6a6f72a8b1346f upstream.

In sparc headers we use the following pattern:

    #if defined(__sparc__) && defined(__arch64__)

    sparc64 specific stuff

    #else

    sparc32 specific stuff

    #endif

In types.h this pattern was not followed and here
we only checked for __sparc__ for no good reason.
It was a left-over from long time ago.

I checked other architectures - and most of them
do not have any such checks. And all the recently
merged versions uses the asm-generic version.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Guenter backported this to 3.2:
 - Adjusted filenames, context
 - There's no duplicate export of types.h to delete]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoslab/mempolicy: always use local policy from interrupt context
Andi Kleen [Sat, 9 Jun 2012 09:40:03 +0000 (02:40 -0700)]
slab/mempolicy: always use local policy from interrupt context

commit e7b691b085fda913830e5280ae6f724b2a63c824 upstream.

slab_node() could access current->mempolicy from interrupt context.
However there's a race condition during exit where the mempolicy
is first freed and then the pointer zeroed.

Using this from interrupts seems bogus anyways. The interrupt
will interrupt a random process and therefore get a random
mempolicy. Many times, this will be idle's, which noone can change.

Just disable this here and always use local for slab
from interrupts. I also cleaned up the callers of slab_node a bit
which always passed the same argument.

I believe the original mempolicy code did that in fact,
so it's likely a regression.

v2: send version with correct logic
v3: simplify. fix typo.
Reported-by: Arun Sharma <asharma@fb.com>
Cc: penberg@kernel.org
Cc: cl@linux.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[tdmackey@twitter.com: Rework control flow based on feedback from
cl@linux.com, fix logic, and cleanup current task_struct reference]
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David Mackey <tdmackey@twitter.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoarch/sparc/math-emu/math_32.c: drop stray break operator
Andrey Utkin [Mon, 4 Aug 2014 20:47:41 +0000 (23:47 +0300)]
arch/sparc/math-emu/math_32.c: drop stray break operator

[ Upstream commit 093758e3daede29cb4ce6aedb111becf9d4bfc57 ]

This commit is a guesswork, but it seems to make sense to drop this
break, as otherwise the following line is never executed and becomes
dead code. And that following line actually saves the result of
local calculation by the pointer given in function argument. So the
proposed change makes sense if this code in the whole makes sense (but I
am unable to analyze it in the whole).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: ldc_connect() should not return EINVAL when handshake is in progress.
Sowmini Varadhan [Fri, 1 Aug 2014 13:50:40 +0000 (09:50 -0400)]
sparc64: ldc_connect() should not return EINVAL when handshake is in progress.

[ Upstream commit 4ec1b01029b4facb651b8ef70bc20a4be4cebc63 ]

The LDC handshake could have been asynchronously triggered
after ldc_bind() enables the ldc_rx() receive interrupt-handler
(and thus intercepts incoming control packets)
and before vio_port_up() calls ldc_connect(). If that is the case,
ldc_connect() should return 0 and let the state-machine
progress.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Karl Volz <karl.volz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosunsab: Fix detection of BREAK on sunsab serial console
Christopher Alexander Tobias Schulze [Sun, 3 Aug 2014 14:01:53 +0000 (16:01 +0200)]
sunsab: Fix detection of BREAK on sunsab serial console

[ Upstream commit fe418231b195c205701c0cc550a03f6c9758fd9e ]

Fix detection of BREAK on sunsab serial console: BREAK detection was only
performed when there were also serial characters received simultaneously.
To handle all BREAKs correctly, the check for BREAK and the corresponding
call to uart_handle_break() must also be done if count == 0, therefore
duplicate this code fragment and pull it out of the loop over the received
characters.

Patch applies to 3.16-rc6.

Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agobbc-i2c: Fix BBC I2C envctrl on SunBlade 2000
Christopher Alexander Tobias Schulze [Sun, 3 Aug 2014 13:44:52 +0000 (15:44 +0200)]
bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000

[ Upstream commit 5cdceab3d5e02eb69ea0f5d8fa9181800baf6f77 ]

Fix regression in bbc i2c temperature and fan control on some Sun systems
that causes the driver to refuse to load due to the bbc_i2c_bussel resource not
being present on the (second) i2c bus where the temperature sensors and fan
control are located. (The check for the number of resources was removed when
the driver was ported to a pure OF driver in mid 2008.)

Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Guard against flushing openfirmware mappings.
David S. Miller [Tue, 5 Aug 2014 03:07:37 +0000 (20:07 -0700)]
sparc64: Guard against flushing openfirmware mappings.

[ Upstream commit 4ca9a23765da3260058db3431faf5b4efd8cf926 ]

Based almost entirely upon a patch by Christopher Alexander Tobias
Schulze.

In commit db64fe02258f1507e13fe5212a989922323685ce ("mm: rewrite vmap
layer") lazy VMAP tlb flushing was added to the vmalloc layer.  This
causes problems on sparc64.

Sparc64 has two VMAP mapped regions and they are not contiguous with
eachother.  First we have the malloc mapping area, then another
unrelated region, then the vmalloc region.

This "another unrelated region" is where the firmware is mapped.

If the lazy TLB flushing logic in the vmalloc code triggers after
we've had both a module unload and a vfree or similar, it will pass an
address range that goes from somewhere inside the malloc region to
somewhere inside the vmalloc region, and thus covering the
openfirmware area entirely.

The sparc64 kernel learns about openfirmware's dynamic mappings in
this region early in the boot, and then services TLB misses in this
area.  But openfirmware has some locked TLB entries which are not
mentioned in those dynamic mappings and we should thus not disturb
them.

These huge lazy TLB flush ranges causes those openfirmware locked TLB
entries to be removed, resulting in all kinds of problems including
hard hangs and crashes during reboot/reset.

Besides causing problems like this, such huge TLB flush ranges are
also incredibly inefficient.  A plea has been made with the author of
the VMAP lazy TLB flushing code, but for now we'll put a safety guard
into our flush_tlb_kernel_range() implementation.

Since the implementation has become non-trivial, stop defining it as a
macro and instead make it a function in a C source file.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Do not insert non-valid PTEs into the TSB hash table.
David S. Miller [Mon, 4 Aug 2014 23:34:01 +0000 (16:34 -0700)]
sparc64: Do not insert non-valid PTEs into the TSB hash table.

[ Upstream commit 18f38132528c3e603c66ea464727b29e9bbcb91b ]

The assumption was that update_mmu_cache() (and the equivalent for PMDs) would
only be called when the PTE being installed will be accessible by the user.

This is not true for code paths originating from remove_migration_pte().

There are dire consequences for placing a non-valid PTE into the TSB.  The TLB
miss frramework assumes thatwhen a TSB entry matches we can just load it into
the TLB and return from the TLB miss trap.

So if a non-valid PTE is in there, we will deadlock taking the TLB miss over
and over, never satisfying the miss.

Just exit early from update_mmu_cache() and friends in this situation.

Based upon a report and patch from Christopher Alexander Tobias Schulze.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Add membar to Niagara2 memcpy code.
David S. Miller [Sat, 17 May 2014 18:28:05 +0000 (11:28 -0700)]
sparc64: Add membar to Niagara2 memcpy code.

[ Upstream commit 5aa4ecfd0ddb1e6dcd1c886e6c49677550f581aa ]

This is the prevent previous stores from overlapping the block stores
done by the memcpy loop.

Based upon a glibc patch by Jose E. Marchesi

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Fix huge TSB mapping on pre-UltraSPARC-III cpus.
David S. Miller [Wed, 7 May 2014 21:07:32 +0000 (14:07 -0700)]
sparc64: Fix huge TSB mapping on pre-UltraSPARC-III cpus.

[ Upstream commit b18eb2d779240631a098626cb6841ee2dd34fda0 ]

Access to the TSB hash tables during TLB misses requires that there be
an atomic 128-bit quad load available so that we fetch a matching TAG
and DATA field at the same time.

On cpus prior to UltraSPARC-III only virtual address based quad loads
are available.  UltraSPARC-III and later provide physical address
based variants which are easier to use.

When we only have virtual address based quad loads available this
means that we have to lock the TSB into the TLB at a fixed virtual
address on each cpu when it runs that process.  We can't just access
the PAGE_OFFSET based aliased mapping of these TSBs because we cannot
take a recursive TLB miss inside of the TLB miss handler without
risking running out of hardware trap levels (some trap combinations
can be deep, such as those generated by register window spill and fill
traps).

Without huge pages it's working perfectly fine, but when the huge TSB
got added another chunk of fixed virtual address space was not
allocated for this second TSB mapping.

So we were mapping both the 8K and 4MB TSBs to the same exact virtual
address, causing multiple TLB matches which gives undefined behavior.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Don't bark so loudly about 32-bit tasks generating 64-bit fault addresses.
David S. Miller [Wed, 7 May 2014 04:27:37 +0000 (21:27 -0700)]
sparc64: Don't bark so loudly about 32-bit tasks generating 64-bit fault addresses.

[ Upstream commit e5c460f46ae7ee94831cb55cb980f942aa9e5a85 ]

This was found using Dave Jone's trinity tool.

When a user process which is 32-bit performs a load or a store, the
cpu chops off the top 32-bits of the effective address before
translating it.

This is because we run 32-bit tasks with the PSTATE_AM (address
masking) bit set.

We can't run the kernel with that bit set, so when the kernel accesses
userspace no address masking occurs.

Since a 32-bit process will have no mappings in that region we will
properly fault, so we don't try to handle this using access_ok(),
which can safely just be a NOP on sparc64.

Real faults from 32-bit processes should never generate such addresses
so a bug check was added long ago, and it barks in the logs if this
happens.

But it also barks when a kernel user access causes this condition, and
that _can_ happen.  For example, if a pointer passed into a system call
is "0xfffffffc" and the kernel access 4 bytes offset from that pointer.

Just handle such faults normally via the exception entries.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Fix top-level fault handling bugs.
David S. Miller [Tue, 29 Apr 2014 06:52:11 +0000 (23:52 -0700)]
sparc64: Fix top-level fault handling bugs.

[ Upstream commit 70ffc6ebaead783ac8dafb1e87df0039bb043596 ]

Make get_user_insn() able to cope with huge PMDs.

Next, make do_fault_siginfo() more robust when get_user_insn() can't
actually fetch the instruction.  In particular, use the MMU announced
fault address when that happens, instead of calling
compute_effective_address() and computing garbage.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Handle 32-bit tasks properly in compute_effective_address().
David S. Miller [Tue, 29 Apr 2014 06:50:08 +0000 (23:50 -0700)]
sparc64: Handle 32-bit tasks properly in compute_effective_address().

[ Upstream commit d037d16372bbe4d580342bebbb8826821ad9edf0 ]

If we have a 32-bit task we must chop off the top 32-bits of the
64-bit value just as the cpu would.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Make itc_sync_lock raw
Kirill Tkhai [Wed, 16 Apr 2014 20:45:24 +0000 (00:45 +0400)]
sparc64: Make itc_sync_lock raw

[ Upstream commit 49b6c01f4c1de3b5e5427ac5aba80f9f6d27837a ]

One more place where we must not be able
to be preempted or to be interrupted in RT.

Always actually disable interrupts during
synchronization cycle.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosparc64: Fix argument sign extension for compat_sys_futex().
David S. Miller [Thu, 1 May 2014 02:37:48 +0000 (19:37 -0700)]
sparc64: Fix argument sign extension for compat_sys_futex().

[ Upstream commit aa3449ee9c87d9b7660dd1493248abcc57769e31 ]

Only the second argument, 'op', is signed.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agosctp: fix possible seqlock seadlock in sctp_packet_transmit()
Eric Dumazet [Tue, 5 Aug 2014 14:49:52 +0000 (16:49 +0200)]
sctp: fix possible seqlock seadlock in sctp_packet_transmit()

[ Upstream commit 757efd32d5ce31f67193cc0e6a56e4dffcc42fb1 ]

Dave reported following splat, caused by improper use of
IP_INC_STATS_BH() in process context.

BUG: using __this_cpu_add() in preemptible [00000000] code: trinity-c117/14551
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 3 PID: 14551 Comm: trinity-c117 Not tainted 3.16.0+ #33
 ffffffff9ec898f0 0000000047ea7e23 ffff88022d32f7f0 ffffffff9e7ee207
 0000000000000003 ffff88022d32f818 ffffffff9e397eaa ffff88023ee70b40
 ffff88022d32f970 ffff8801c026d580 ffff88022d32f828 ffffffff9e397ee3
Call Trace:
 [<ffffffff9e7ee207>] dump_stack+0x4e/0x7a
 [<ffffffff9e397eaa>] check_preemption_disabled+0xfa/0x100
 [<ffffffff9e397ee3>] __this_cpu_preempt_check+0x13/0x20
 [<ffffffffc0839872>] sctp_packet_transmit+0x692/0x710 [sctp]
 [<ffffffffc082a7f2>] sctp_outq_flush+0x2a2/0xc30 [sctp]
 [<ffffffff9e0d985c>] ? mark_held_locks+0x7c/0xb0
 [<ffffffff9e7f8c6d>] ? _raw_spin_unlock_irqrestore+0x5d/0x80
 [<ffffffffc082b99a>] sctp_outq_uncork+0x1a/0x20 [sctp]
 [<ffffffffc081e112>] sctp_cmd_interpreter.isra.23+0x1142/0x13f0 [sctp]
 [<ffffffffc081c86b>] sctp_do_sm+0xdb/0x330 [sctp]
 [<ffffffff9e0b8f1b>] ? preempt_count_sub+0xab/0x100
 [<ffffffffc083b350>] ? sctp_cname+0x70/0x70 [sctp]
 [<ffffffffc08389ca>] sctp_primitive_ASSOCIATE+0x3a/0x50 [sctp]
 [<ffffffffc083358f>] sctp_sendmsg+0x88f/0xe30 [sctp]
 [<ffffffff9e0d673a>] ? lock_release_holdtime.part.28+0x9a/0x160
 [<ffffffff9e0d62ce>] ? put_lock_stats.isra.27+0xe/0x30
 [<ffffffff9e73b624>] inet_sendmsg+0x104/0x220
 [<ffffffff9e73b525>] ? inet_sendmsg+0x5/0x220
 [<ffffffff9e68ac4e>] sock_sendmsg+0x9e/0xe0
 [<ffffffff9e1c0c09>] ? might_fault+0xb9/0xc0
 [<ffffffff9e1c0bae>] ? might_fault+0x5e/0xc0
 [<ffffffff9e68b234>] SYSC_sendto+0x124/0x1c0
 [<ffffffff9e0136b0>] ? syscall_trace_enter+0x250/0x330
 [<ffffffff9e68c3ce>] SyS_sendto+0xe/0x10
 [<ffffffff9e7f9be4>] tracesys+0xdd/0xe2

This is a followup of commits f1d8cba61c3c4b ("inet: fix possible
seqlock deadlocks") and 7f88c6b23afbd315 ("ipv6: fix possible seqlock
deadlock in ip6_finish_output2")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agoiovec: make sure the caller actually wants anything in memcpy_fromiovecend
Sasha Levin [Fri, 1 Aug 2014 03:00:35 +0000 (23:00 -0400)]
iovec: make sure the caller actually wants anything in memcpy_fromiovecend

[ Upstream commit 06ebb06d49486676272a3c030bfeef4bd969a8e6 ]

Check for cases when the caller requests 0 bytes instead of running off
and dereferencing potentially invalid iovecs.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agomacvlan: Initialize vlan_features to turn on offload support.
Vlad Yasevich [Thu, 31 Jul 2014 14:30:25 +0000 (10:30 -0400)]
macvlan: Initialize vlan_features to turn on offload support.

[ Upstream commit 081e83a78db9b0ae1f5eabc2dedecc865f509b98 ]

Macvlan devices do not initialize vlan_features.  As a result,
any vlan devices configured on top of macvlans perform very poorly.
Initialize vlan_features based on the vlan features of the lower-level
device.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agonet: sctp: inherit auth_capable on INIT collisions
Daniel Borkmann [Tue, 22 Jul 2014 13:22:45 +0000 (15:22 +0200)]
net: sctp: inherit auth_capable on INIT collisions

[ Upstream commit 1be9a950c646c9092fb3618197f7b6bfb50e82aa ]

Jason reported an oops caused by SCTP on his ARM machine with
SCTP authentication enabled:

Internal error: Oops: 17 [#1] ARM
CPU: 0 PID: 104 Comm: sctp-test Not tainted 3.13.0-68744-g3632f30c9b20-dirty #1
task: c6eefa40 ti: c6f52000 task.ti: c6f52000
PC is at sctp_auth_calculate_hmac+0xc4/0x10c
LR is at sg_init_table+0x20/0x38
pc : [<c024bb80>]    lr : [<c00f32dc>]    psr: 40000013
sp : c6f538e8  ip : 00000000  fp : c6f53924
r10: c6f50d80  r9 : 00000000  r8 : 00010000
r7 : 00000000  r6 : c7be4000  r5 : 00000000  r4 : c6f56254
r3 : c00c8170  r2 : 00000001  r1 : 00000008  r0 : c6f1e660
Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005397f  Table: 06f28000  DAC: 00000015
Process sctp-test (pid: 104, stack limit = 0xc6f521c0)
Stack: (0xc6f538e8 to 0xc6f54000)
[...]
Backtrace:
[<c024babc>] (sctp_auth_calculate_hmac+0x0/0x10c) from [<c0249af8>] (sctp_packet_transmit+0x33c/0x5c8)
[<c02497bc>] (sctp_packet_transmit+0x0/0x5c8) from [<c023e96c>] (sctp_outq_flush+0x7fc/0x844)
[<c023e170>] (sctp_outq_flush+0x0/0x844) from [<c023ef78>] (sctp_outq_uncork+0x24/0x28)
[<c023ef54>] (sctp_outq_uncork+0x0/0x28) from [<c0234364>] (sctp_side_effects+0x1134/0x1220)
[<c0233230>] (sctp_side_effects+0x0/0x1220) from [<c02330b0>] (sctp_do_sm+0xac/0xd4)
[<c0233004>] (sctp_do_sm+0x0/0xd4) from [<c023675c>] (sctp_assoc_bh_rcv+0x118/0x160)
[<c0236644>] (sctp_assoc_bh_rcv+0x0/0x160) from [<c023d5bc>] (sctp_inq_push+0x6c/0x74)
[<c023d550>] (sctp_inq_push+0x0/0x74) from [<c024a6b0>] (sctp_rcv+0x7d8/0x888)

While we already had various kind of bugs in that area
ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if
we/peer is AUTH capable") and b14878ccb7fa ("net: sctp: cache
auth_enable per endpoint"), this one is a bit of a different
kind.

Giving a bit more background on why SCTP authentication is
needed can be found in RFC4895:

  SCTP uses 32-bit verification tags to protect itself against
  blind attackers. These values are not changed during the
  lifetime of an SCTP association.

  Looking at new SCTP extensions, there is the need to have a
  method of proving that an SCTP chunk(s) was really sent by
  the original peer that started the association and not by a
  malicious attacker.

To cause this bug, we're triggering an INIT collision between
peers; normal SCTP handshake where both sides intent to
authenticate packets contains RANDOM; CHUNKS; HMAC-ALGO
parameters that are being negotiated among peers:

  ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
  <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
  -------------------- COOKIE-ECHO -------------------->
  <-------------------- COOKIE-ACK ---------------------

RFC4895 says that each endpoint therefore knows its own random
number and the peer's random number *after* the association
has been established. The local and peer's random number along
with the shared key are then part of the secret used for
calculating the HMAC in the AUTH chunk.

Now, in our scenario, we have 2 threads with 1 non-blocking
SEQ_PACKET socket each, setting up common shared SCTP_AUTH_KEY
and SCTP_AUTH_ACTIVE_KEY properly, and each of them calling
sctp_bindx(3), listen(2) and connect(2) against each other,
thus the handshake looks similar to this, e.g.:

  ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
  <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
  <--------- INIT[RANDOM; CHUNKS; HMAC-ALGO] -----------
  -------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] -------->
  ...

Since such collisions can also happen with verification tags,
the RFC4895 for AUTH rather vaguely says under section 6.1:

  In case of INIT collision, the rules governing the handling
  of this Random Number follow the same pattern as those for
  the Verification Tag, as explained in Section 5.2.4 of
  RFC 2960 [5]. Therefore, each endpoint knows its own Random
  Number and the peer's Random Number after the association
  has been established.

In RFC2960, section 5.2.4, we're eventually hitting Action B:

  B) In this case, both sides may be attempting to start an
     association at about the same time but the peer endpoint
     started its INIT after responding to the local endpoint's
     INIT. Thus it may have picked a new Verification Tag not
     being aware of the previous Tag it had sent this endpoint.
     The endpoint should stay in or enter the ESTABLISHED
     state but it MUST update its peer's Verification Tag from
     the State Cookie, stop any init or cookie timers that may
     running and send a COOKIE ACK.

In other words, the handling of the Random parameter is the
same as behavior for the Verification Tag as described in
Action B of section 5.2.4.

Looking at the code, we exactly hit the sctp_sf_do_dupcook_b()
case which triggers an SCTP_CMD_UPDATE_ASSOC command to the
side effect interpreter, and in fact it properly copies over
peer_{random, hmacs, chunks} parameters from the newly created
association to update the existing one.

Also, the old asoc_shared_key is being released and based on
the new params, sctp_auth_asoc_init_active_key() updated.
However, the issue observed in this case is that the previous
asoc->peer.auth_capable was 0, and has *not* been updated, so
that instead of creating a new secret, we're doing an early
return from the function sctp_auth_asoc_init_active_key()
leaving asoc->asoc_shared_key as NULL. However, we now have to
authenticate chunks from the updated chunk list (e.g. COOKIE-ACK).

That in fact causes the server side when responding with ...

  <------------------ AUTH; COOKIE-ACK -----------------

... to trigger a NULL pointer dereference, since in
sctp_packet_transmit(), it discovers that an AUTH chunk is
being queued for xmit, and thus it calls sctp_auth_calculate_hmac().

Since the asoc->active_key_id is still inherited from the
endpoint, and the same as encoded into the chunk, it uses
asoc->asoc_shared_key, which is still NULL, as an asoc_key
and dereferences it in ...

  crypto_hash_setkey(desc.tfm, &asoc_key->data[0], asoc_key->len)

... causing an oops. All this happens because sctp_make_cookie_ack()
called with the *new* association has the peer.auth_capable=1
and therefore marks the chunk with auth=1 after checking
sctp_auth_send_cid(), but it is *actually* sent later on over
the then *updated* association's transport that didn't initialize
its shared key due to peer.auth_capable=0. Since control chunks
in that case are not sent by the temporary association which
are scheduled for deletion, they are issued for xmit via
SCTP_CMD_REPLY in the interpreter with the context of the
*updated* association. peer.auth_capable was 0 in the updated
association (which went from COOKIE_WAIT into ESTABLISHED state),
since all previous processing that performed sctp_process_init()
was being done on temporary associations, that we eventually
throw away each time.

The correct fix is to update to the new peer.auth_capable
value as well in the collision case via sctp_assoc_update(),
so that in case the collision migrated from 0 -> 1,
sctp_auth_asoc_init_active_key() can properly recalculate
the secret. This therefore fixes the observed server panic.

Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agotcp: Fix integer-overflow in TCP vegas
Christoph Paasch [Tue, 29 Jul 2014 11:40:57 +0000 (13:40 +0200)]
tcp: Fix integer-overflow in TCP vegas

[ Upstream commit 1f74e613ded11517db90b2bd57e9464d9e0fb161 ]

In vegas we do a multiplication of the cwnd and the rtt. This
may overflow and thus their result is stored in a u64. However, we first
need to cast the cwnd so that actually 64-bit arithmetic is done.

Then, we need to do do_div to allow this to be used on 32-bit arches.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Doug Leith <doug.leith@nuim.ie>
Fixes: 8d3a564da34e (tcp: tcp_vegas cong avoid fix)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
7 years agotcp: Fix integer-overflows in TCP veno
Christoph Paasch [Tue, 29 Jul 2014 10:07:27 +0000 (12:07 +0200)]
tcp: Fix integer-overflows in TCP veno

[ Upstream commit 45a07695bc64b3ab5d6d2215f9677e5b8c05a7d0 ]

In veno we do a multiplication of the cwnd and the rtt. This
may overflow and thus their result is stored in a u64. However, we first
need to cast the cwnd so that actually 64-bit arithmetic is done.

A first attempt at fixing 76f1017757aa0 ([TCP]: TCP Veno congestion
control) was made by 159131149c2 (tcp: Overflow bug in Vegas), but it
failed to add the required cast in tcp_veno_cong_avoid().

Fixes: 76f1017757aa0 ([TCP]: TCP Veno congestion control)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>