Linux 3.2.60

futex: Make lookup_pi_state more robust

commit 54a217887a7b658e2650c3feff22756ab80c7339 upstream.

The current implementation of lookup_pi_state has ambigous handling of
the TID value 0 in the user space futex.  We can get into the kernel
even if the TID value is 0, because either there is a stale waiters bit
or the owner died bit is set or we are called from the requeue_pi path
or from user space just for fun.

The current code avoids an explicit sanity check for pid = 0 in case
that kernel internal state (waiters) are found for the user space
address.  This can lead to state leakage and worse under some
circumstances.

Handle the cases explicit:

       Waiter | pi_state | pi->owner | uTID      | uODIED | ?

  [1]  NULL   | ---      | ---       | 0         | 0/1    | Valid
  [2]  NULL   | ---      | ---       | >0        | 0/1    | Valid

  [3]  Found  | NULL     | --        | Any       | 0/1    | Invalid

  [4]  Found  | Found    | NULL      | 0         | 1      | Valid
  [5]  Found  | Found    | NULL      | >0        | 1      | Invalid

  [6]  Found  | Found    | task      | 0         | 1      | Valid

  [7]  Found  | Found    | NULL      | Any       | 0      | Invalid

  [8]  Found  | Found    | task      | ==taskTID | 0/1    | Valid
  [9]  Found  | Found    | task      | 0         | 0      | Invalid
  [10] Found  | Found    | task      | !=taskTID | 0/1    | Invalid

 [1] Indicates that the kernel can acquire the futex atomically. We
     came came here due to a stale FUTEX_WAITERS/FUTEX_OWNER_DIED bit.

 [2] Valid, if TID does not belong to a kernel thread. If no matching
     thread is found then it indicates that the owner TID has died.

 [3] Invalid. The waiter is queued on a non PI futex

 [4] Valid state after exit_robust_list(), which sets the user space
     value to FUTEX_WAITERS | FUTEX_OWNER_DIED.

 [5] The user space value got manipulated between exit_robust_list()
     and exit_pi_state_list()

 [6] Valid state after exit_pi_state_list() which sets the new owner in
     the pi_state but cannot access the user space value.

 [7] pi_state->owner can only be NULL when the OWNER_DIED bit is set.

 [8] Owner and user space value match

 [9] There is no transient state which sets the user space TID to 0
     except exit_robust_list(), but this is indicated by the
     FUTEX_OWNER_DIED bit. See [4]

[10] There is no transient state which leaves owner and user space
     TID out of sync.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

futex: Always cleanup owner tid in unlock_pi

commit 13fbca4c6ecd96ec1a1cfa2e4f2ce191fe928a5e upstream.

If the owner died bit is set at futex_unlock_pi, we currently do not
cleanup the user space futex.  So the owner TID of the current owner
(the unlocker) persists.  That's observable inconsistant state,
especially when the ownership of the pi state got transferred.

Clean it up unconditionally.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

futex: Validate atomic acquisition in futex_lock_pi_atomic()

commit b3eaa9fc5cd0a4d74b18f6b8dc617aeaf1873270 upstream.

We need to protect the atomic acquisition in the kernel against rogue
user space which sets the user space futex to 0, so the kernel side
acquisition succeeds while there is existing state in the kernel
associated to the real owner.

Verify whether the futex has waiters associated with kernel state.  If
it has, return -EINVAL.  The state is corrupted already, so no point in
cleaning it up.  Subsequent calls will fail as well.  Not our problem.

[ tglx: Use futex_top_waiter() and explain why we do not need to try
   restoring the already corrupted user space state. ]

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

futex-prevent-requeue-pi-on-same-futex.patch futex: Forbid uaddr == uaddr2 in futex_requeue(..., requeue_pi=1)

commit e9c243a5a6de0be8e584c604d353412584b592f8 upstream.

If uaddr == uaddr2, then we have broken the rule of only requeueing from
a non-pi futex to a pi futex with this call.  If we attempt this, then
dangling pointers may be left for rt_waiter resulting in an exploitable
condition.

This change brings futex_requeue() in line with futex_wait_requeue_pi()
which performs the same check as per commit 6f7b0a2a5c0f ("futex: Forbid
uaddr == uaddr2 in futex_wait_requeue_pi()")

[ tglx: Compare the resulting keys as well, as uaddrs might be
   different depending on the mapping ]

Fixes CVE-2014-3153.

Reported-by: Pinkie Pie
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

futex: Prevent attaching to kernel threads

commit f0d71b3dcb8332f7971b5f2363632573e6d9486a upstream.

We happily allow userspace to declare a random kernel thread to be the
owner of a user space PI futex.

Found while analysing the fallout of Dave Jones syscall fuzzer.

We also should validate the thread group for private futexes and find
some fast way to validate whether the "alleged" owner has RW access on
the file which backs the SHM, but that's a separate issue.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.194824402@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

futex: Add another early deadlock detection check

commit 866293ee54227584ffcb4a42f69c1f365974ba7f upstream.

Dave Jones trinity syscall fuzzer exposed an issue in the deadlock
detection code of rtmutex:
  http://lkml.kernel.org/r/20140429151655.GA14277@redhat.com

That underlying issue has been fixed with a patch to the rtmutex code,
but the futex code must not call into rtmutex in that case because
    - it can detect that issue early
    - it avoids a different and more complex fixup for backing out

If the user space variable got manipulated to 0x80000000 which means
no lock holder, but the waiters bit set and an active pi_state in the
kernel is found we can figure out the recursive locking issue by
looking at the pi_state owner. If that is the current task, then we
can safely return -EDEADLK.

The check should have been added in commit 59fa62451 (futex: Handle
futex_pi OWNER_DIED take over correctly) already, but I did not see
the above issue caused by user space manipulation back then.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.097349971@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm/memory-failure.c: fix memory leak by race between poison and unpoison

commit 3e030ecc0fc7de10fd0da10c1c19939872a31717 upstream.

When a memory error happens on an in-use page or (free and in-use)
hugepage, the victim page is isolated with its refcount set to one.

When you try to unpoison it later, unpoison_memory() calls put_page()
for it twice in order to bring the page back to free page pool (buddy or
free hugepage list).  However, if another memory error occurs on the
page which we are unpoisoning, memory_failure() returns without
releasing the refcount which was incremented in the same call at first,
which results in memory leak and unconsistent num_poisoned_pages
statistics.  This patch fixes it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: s/num_poisoned_pages/bad_mce_pages/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hwpoison, hugetlb: lock_page/unlock_page does not match for handling a free hugepage

commit b985194c8c0a130ed155b71662e39f7eaea4876f upstream.

For handling a free hugepage in memory failure, the race will happen if
another thread hwpoisoned this hugepage concurrently.  So we need to
check PageHWPoison instead of !PageHWPoison.

If hwpoison_filter(p) returns true or a race happens, then we need to
unlock_page(hpage).

Signed-off-by: Chen Yucong <slaoub@gmail.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: s/num_poisoned_pages/bad_mce_pages/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dma: mv_xor: Flush descriptors before activating a channel

commit 5a9a55bf9157d3490b0c8c4c81d4708602c26e07 upstream.

We need to use writel() instead of writel_relaxed() when starting
a channel, to ensure all the descriptors have been flushed before
the activation.

While at it, remove the unneeded read-modify-write and make the
code simpler.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[bwh: Backported to 3.2: it was using __raw_readl() and __raw_writel()
 which are just as wrong]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

nfsd4: warn on finding lockowner without stateid's

commit 27b11428b7de097c42f205beabb1764f4365443b upstream.

The current code assumes a one-to-one lockowner<->lock stateid
correspondance.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

nfsd4: remove lockowner when removing lock stateid

commit a1b8ff4c97b4375d21b6d6c45d75877303f61b3b upstream.

The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.

We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.

Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

can: peak_pci: prevent use after free at netdev removal

commit 0b5a958cf4df3a5cd578b861471e62138f55c85e upstream.

As remarked by Christopher R. Baker in his post at

http://marc.info/?l=linux-can&m=139707295706465&w=2

there's a possibility for an use after free condition at device removal.

This simplified patch introduces an additional variable to prevent the issue.
Thanks for catching this.

Reported-by: Christopher R. Baker <cbaker@rec.ri.cmu.edu>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

can: peak_pci: Fix the way channels are linked together

commit 29830406415c227a54af429d7b300aabd4754237 upstream.

Change the way channels objects are linked together by peak_pci_probe()
avoiding any kernel oops when driver is removed. Side effect is that
the list is now browsed from last to first channel.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: handle non-VGA class pci devices with ATRM

commit d8ade3526b2aa0505132c404c05a38b73ea15490 upstream.

Newer PX systems have non-VGA pci class dGPUs.  Update
the ATRM fetch method to handle those cases.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=75401

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
[bwh: Backported to 3.2: s/ACPI_HANDLE()/DEVICE_ACPI_HANDLE()/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: also try GART for CPU accessed buffers

commit 544092596e8ac269f70e70961b5e9381909c9b1e upstream.

Placing them exclusively into VRAM might not work all the time.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: ttm_bo_validate() takes an extra no_wait_reserve
 parameter; keep passing true]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

perf: Prevent false warning in perf_swevent_add

commit 39af6b1678afa5880dda7e375cf3f9d395087f6d upstream.

The perf cpu offline callback takes down all cpu context
events and releases swhash->swevent_hlist.

This could race with task context software event being just
scheduled on this cpu via perf_swevent_add while cpu hotplug
code already cleaned up event's data.

The race happens in the gap between the cpu notifier code
and the cpu being actually taken down. Note that only cpu
ctx events are terminated in the perf cpu hotplug code.

It's easily reproduced with:
  $ perf record -e faults perf bench sched pipe

while putting one of the cpus offline:
  # echo 0 > /sys/devices/system/cpu/cpu1/online

Console emits following warning:
  WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0()
  Modules linked in:
  CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G        W    3.14.0+ #256
  Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008
   0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005
   0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046
   ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001
  Call Trace:
   [<ffffffff81665a23>] dump_stack+0x4f/0x7c
   [<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0
   [<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20
   [<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0
   [<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0
   [<ffffffff8111646a>] group_sched_in+0x6a/0x1f0
   [<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0
   [<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450
   [<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0
   [<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0
   [<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460
   [<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30
   [<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100
   [<ffffffff8166a7de>] __schedule+0x30e/0xad0
   [<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560
   [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
   [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
   [<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70
   [<ffffffff816707f0>] retint_kernel+0x20/0x30
   [<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90
   [<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67
   [<ffffffff81679321>] ? sysret_check+0x5/0x56

Fixing this by tracking the cpu hotplug state and displaying
the WARN only if current cpu is initialized properly.

Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1396861448-10097-1-git-send-email-jolsa@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

perf: Limit perf_event_attr::sample_period to 63 bits

commit 0819b2e30ccb93edf04876237b6205eef84ec8d2 upstream.

Vince reported that using a large sample_period (one with bit 63 set)
results in wreckage since while the sample_period is fundamentally
unsigned (negative periods don't make sense) the way we implement
things very much rely on signed logic.

So limit sample_period to 63 bits to avoid tripping over this.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-p25fhunibl4y3qi0zuqmyf4b@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

libceph: fix corruption when using page_count 0 page in rbd

commit 178eda29ca721842f2146378e73d43e0044c4166 upstream.

It has been reported that using ZFSonLinux on rbd will result in memory
corruption. The bug report can be found here:

https://github.com/zfsonlinux/spl/issues/241
http://tracker.ceph.com/issues/7790

The reason is that ZFS will send pages with page_count 0 into rbd, which in
turns send them to tcp_sendpage. However, tcp_sendpage cannot deal with
page_count 0, as it will do get_page and put_page, and erroneously free the
page.

This type of issue has been noted before, and handled in iscsi, drbd,
etc. So, rbd should also handle this. This fix address this issue by fall back
to slower sendmsg when page_count 0 detected.

Cc: Sage Weil <sage@inktank.com>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

libceph: only call kernel_sendpage() via helper

commit e36b13cceb46136d849aeee06b4907ad3570ba78 upstream.

Make ceph_tcp_sendpage() be the only place kernel_sendpage() is
used, by using this helper in write_partial_msg_pages().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
[bwh: Backported to 3.2:
 - Add ceph_tcp_sendpage(), from commit 31739139f3ed ('libceph: use
   kernel_sendpage() for sending zeroes'), the rest of which is not
   applicable
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

PCI: shpchp: Check bridge's secondary (not primary) bus speed

commit 93fa9d32670f5592c8e56abc9928fc194e1e72fc upstream.

When a new device is added below a hotplug bridge, the bridge's secondary
bus speed and the device's bus speed must match.  The shpchp driver
previously checked the bridge's *primary* bus speed, not the secondary bus
speed.

This caused hot-add errors like:

  shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch

Check the secondary bus speed instead.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251
Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core")
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86-64, modify_ldt: Make support for 16-bit segments a runtime option

commit fa81511bb0bbb2b1aace3695ce869da9762624ff upstream.

Checkin:

b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

disabled 16-bit segments on 64-bit kernels due to an information
leak.  However, it does seem that people are genuinely using Wine to
run old 16-bit Windows programs on Linux.

A proper fix for this ("espfix64") is coming in the upcoming merge
window, but as a temporary fix, create a sysctl to allow the
administrator to re-enable support for 16-bit segments.

It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If
you hit this issue and care about your old Windows program more than
you care about a kernel stack address information leak, you can do

   echo 1 > /proc/sys/abi/ldt16

as root (add it to your startup scripts), and you should be ok.

The sysctl table is only added if you have COMPAT support enabled on
x86-64, but I assume anybody who runs old windows binaries very much
does that ;)

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

i2c: s3c2410: resume race fix

commit ce78cc071f5f541480e381cc0241d37590041a9d upstream.

Don't unmark the device as suspended until after it's been re-setup.

The main race would be w.r.t. an i2c driver that gets resumed at the same
time (asyncronously), that is allowed to do a transfer since suspended
is set to 0 before reinit, but really should have seen the -EIO return
instead.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

i2c: designware: Mask all interrupts during i2c controller enable

commit 47bb27e78867997040a228328f2a631c3c7f2c82 upstream.

There have been "i2c_designware 80860F41:00: controller timed out" errors
on a number of Baytrail platforms. The issue is caused by incorrect value in
Interrupt Mask Register (DW_IC_INTR_MASK)  when i2c core is being enabled.
This causes call to __i2c_dw_enable() to immediately start the transfer which
leads to timeout. There are 3 failure modes observed:

1. Failure in S0 to S3 resume path

The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start
the first transaction after resuming from system sleep, TX_EMPTY interrupt
is already unmasked because of the hardware default.

2. Failure in normal operational path

This failure happens rarely and is hard to reproduce. Debug trace showed that
DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant
TX_EMPTY was unmasked.

3. Failure in S3 to S0 suspend path

This failure also happens rarely and is hard to reproduce. Adding debug trace
that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR
call trace we could conclude TX_EMPTY was unmasked when problem occurred.

The patch masks all interrupts before the controller is enabled to resolve the
faulty DW_IC_INTR_MASK conditions.

Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: improved the comment and removed typo in commit msg]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow()

commit 9844f5462392b53824e8b86726e7c33b5ecbb676 upstream.

The invalidation is required in order to maintain proper semantics
under CoW conditions. In scenarios where a process clones several
threads, a thread operating on a core whose DTLB entry for a
particular hugepage has not been invalidated, will be reading from
the hugepage that belongs to the forked child process, even after
hugetlb_cow().

The thread will not see the updated page as long as the stale DTLB
entry remains cached, the thread attempts to write into the page,
the child process exits, or the thread gets migrated to a different
processor.

Signed-off-by: Anthony Iliopoulos <anthony.iliopoulos@huawei.com>
Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corp
Suggested-by: Shay Goikhman <shay.goikhman@huawei.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode

commit 97d9d23dda6f37d90aefeec4ed619d52df525382 upstream.

If a struct contains 64-bit fields, it is aligned on 64-bit boundaries
within containing structs in 64-bit compilations. This is the case with
struct v4l2_window, which contains pointers and is embedded into struct
v4l2_format, and that one is embedded into struct v4l2_create_buffers.
Unlike some other structs, used as a part of the kernel ABI as ioctl()
arguments, that are packed, these structs aren't packed. This isn't a
problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains
a bug, that triggers in such 64-bit builds. That code wrongly assumes,
that in struct v4l2_create_buffers, struct v4l2_format immediately follows
the __u32 memory field, which in fact isn't the case. This bug wasn't
visible until now, because until recently hardly any applications used
this ioctl() and mostly embedded 32-bit only drivers implemented it. This
is changing now with addition of this ioctl() to some USB drivers, e.g.
UVC. This patch fixes the bug by copying parts of struct
v4l2_create_buffers separately.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space

commit cfece5857ca51d1dcdb157017aba226f594e9dcf upstream.

Commit 75e2bdad8901a0b599e01a96229be922eef1e488 "ov7670: allow
configuration of image size, clock speed, and I/O method" uses a wrong
index to iterate an array. Apart from being wrong, it also uses an
unchecked value from user-space, which can cause access to unmapped
memory in the kernel, triggered by a normal desktop user with rights to
use V4L2 devices.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2:
 - Adjust filename
 - win_sizes array is static, not per-device]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hwmon: (emc1403) Support full range of known chip revision numbers

commit 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 upstream.

The datasheet for EMC1413/EMC1414, which is fully compatible to
EMC1403/1404 and uses the same chip identification, references revision
numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers
from 0x01 to 0x04 to make sure none are missed.

Signed-off-by: Josef Gajdusek <atx@atx.name>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hwmon: (emc1403) fix inverted store_hyst()

commit 17c048fc4bd95efea208a1920f169547d8588f1f upstream.

Attempts to set the hysteresis value to a temperature below the target
limit fails with "write error: Numerical result out of range" due to
an inverted comparison.

Signed-off-by: Josef Gajdusek <atx@atx.name>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hrtimer: Set expiry time before switch_hrtimer_base()

commit 84ea7fe37908254c3bd90910921f6e1045c1747a upstream.

switch_hrtimer_base() calls hrtimer_check_target() which ensures that
we do not migrate a timer to a remote cpu if the timer expires before
the current programmed expiry time on that remote cpu.

But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the
new expiry time is set. So the sanity check in hrtimer_check_target()
is operating on stale or even uninitialized data.

Update expiry time before calling switch_hrtimer_base().

[ tglx: Rewrote changelog once again ]

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: linaro-networking@linaro.org
Cc: fweisbec@gmail.com
Cc: arvind.chauhan@arm.com
Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.1399882253.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFSD: Call ->set_acl with a NULL ACL structure if no entries

commit aa07c713ecfc0522916f3cd57ac628ea6127c0ec upstream.

After setting ACL for directory, I got two problems that caused
by the cached zero-length default posix acl.

This patch make sure nfsd4_set_nfs4_acl calls ->set_acl
with a NULL ACL structure if there are no entries.

Thanks for Christoph Hellwig's advice.

First problem:
............ hang ...........

Second problem:
[ 1610.167668] ------------[ cut here ]------------
[ 1610.168320] kernel BUG at /root/nfs/linux/fs/nfsd/nfs4acl.c:239!
[ 1610.168320] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 1610.168320] Modules linked in: nfsv4(OE) nfs(OE) nfsd(OE)
rpcsec_gss_krb5 fscache ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack
rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables
ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_raw ip6table_filter
ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw
auth_rpcgss nfs_acl snd_intel8x0 ppdev lockd snd_ac97_codec ac97_bus
snd_pcm snd_timer e1000 pcspkr parport_pc snd parport serio_raw joydev
i2c_piix4 sunrpc(OE) microcode soundcore i2c_core ata_generic pata_acpi
[last unloaded: nfsd]
[ 1610.168320] CPU: 0 PID: 27397 Comm: nfsd Tainted: G           OE
3.15.0-rc1+ #15
[ 1610.168320] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 1610.168320] task: ffff88005ab653d0 ti: ffff88005a944000 task.ti:
ffff88005a944000
[ 1610.168320] RIP: 0010:[<ffffffffa034d5ed>]  [<ffffffffa034d5ed>]
_posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd]
[ 1610.168320] RSP: 0018:ffff88005a945b00  EFLAGS: 00010293
[ 1610.168320] RAX: 0000000000000001 RBX: ffff88006700bac0 RCX:
0000000000000000
[ 1610.168320] RDX: 0000000000000000 RSI: ffff880067c83f00 RDI:
ffff880068233300
[ 1610.168320] RBP: ffff88005a945b48 R08: ffffffff81c64830 R09:
0000000000000000
[ 1610.168320] R10: ffff88004ea85be0 R11: 000000000000f475 R12:
ffff880068233300
[ 1610.168320] R13: 0000000000000003 R14: 0000000000000002 R15:
ffff880068233300
[ 1610.168320] FS:  0000000000000000(0000) GS:ffff880077800000(0000)
knlGS:0000000000000000
[ 1610.168320] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1610.168320] CR2: 00007f5bcbd3b0b9 CR3: 0000000001c0f000 CR4:
00000000000006f0
[ 1610.168320] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1610.168320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 1610.168320] Stack:
[ 1610.168320]  ffffffff00000000 0000000b67c83500 000000076700bac0
0000000000000000
[ 1610.168320]  ffff88006700bac0 ffff880068233300 ffff88005a945c08
0000000000000002
[ 1610.168320]  0000000000000000 ffff88005a945b88 ffffffffa034e2d5
000000065a945b68
[ 1610.168320] Call Trace:
[ 1610.168320]  [<ffffffffa034e2d5>] nfsd4_get_nfs4_acl+0x95/0x150 [nfsd]
[ 1610.168320]  [<ffffffffa03400d6>] nfsd4_encode_fattr+0x646/0x1e70 [nfsd]
[ 1610.168320]  [<ffffffff816a6e6e>] ? kmemleak_alloc+0x4e/0xb0
[ 1610.168320]  [<ffffffffa0327962>] ?
nfsd_setuser_and_check_port+0x52/0x80 [nfsd]
[ 1610.168320]  [<ffffffff812cd4bb>] ? selinux_cred_prepare+0x1b/0x30
[ 1610.168320]  [<ffffffffa0341caa>] nfsd4_encode_getattr+0x5a/0x60 [nfsd]
[ 1610.168320]  [<ffffffffa0341e07>] nfsd4_encode_operation+0x67/0x110
[nfsd]
[ 1610.168320]  [<ffffffffa033844d>] nfsd4_proc_compound+0x21d/0x810 [nfsd]
[ 1610.168320]  [<ffffffffa0324d9b>] nfsd_dispatch+0xbb/0x200 [nfsd]
[ 1610.168320]  [<ffffffffa00850cd>] svc_process_common+0x46d/0x6d0 [sunrpc]
[ 1610.168320]  [<ffffffffa0085433>] svc_process+0x103/0x170 [sunrpc]
[ 1610.168320]  [<ffffffffa032472f>] nfsd+0xbf/0x130 [nfsd]
[ 1610.168320]  [<ffffffffa0324670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[ 1610.168320]  [<ffffffff810a5202>] kthread+0xd2/0xf0
[ 1610.168320]  [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40
[ 1610.168320]  [<ffffffff816c1ebc>] ret_from_fork+0x7c/0xb0
[ 1610.168320]  [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40
[ 1610.168320] Code: 78 02 e9 e7 fc ff ff 31 c0 31 d2 31 c9 66 89 45 ce
41 8b 04 24 66 89 55 d0 66 89 4d d2 48 8d 04 80 49 8d 5c 84 04 e9 37 fd
ff ff <0f> 0b 90 0f 1f 44 00 00 55 8b 56 08 c7 07 00 00 00 00 8b 46 0c
[ 1610.168320] RIP  [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0
[nfsd]
[ 1610.168320]  RSP <ffff88005a945b00>
[ 1610.257313] ---[ end trace 838254e3e352285b ]---

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

trace: module: Maintain a valid user count

commit 098507ae3ec2331476fb52e85d4040c1cc6d0ef4 upstream.

The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.

Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.

Use 'count = incs - decs' to compute the user count.

Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: c1ab9cab7509 "merge conflict resolution"
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check

commit 6227cb00cc120f9a43ce8313bb0475ddabcb7d01 upstream.

The check at the beginning of cpupri_find() makes sure that the task_pri
variable does not exceed the cp->pri_to_cpu array length. But that length
is CPUPRI_NR_PRIORITIES not MAX_RT_PRIO, where it will miss the last two
priorities in that array.

As task_pri is computed from convert_prio() which should never be bigger
than CPUPRI_NR_PRIORITIES, if the check should cause a panic if it is
hit.

Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1397015410.5212.13.camel@marge.simpson.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm/page-writeback.c: fix divide by zero in pos_ratio_polynom

commit d5c9fde3dae750889168807038243ff36431d276 upstream.

It is possible for "limit - setpoint + 1" to equal zero, after getting
truncated to a 32 bit variable, and resulting in a divide by zero error.

Using the fully 64 bit divide functions avoids this problem.  It also
will cause pos_ratio_polynom() to return the correct value when
(setpoint - limit) exceeds 2^32.

Also uninline pos_ratio_polynom, at Andrew's request.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
 Adjust context - pos_ratio_polynom() is not a separate function]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Negative (setpoint-dirty) in bdi_position_ratio()

commit ed84825b785ceb932af7dd5aa08614801721320b upstream.

In bdi_position_ratio(), get difference (setpoint-dirty) right even when
negative. Both setpoint and dirty are unsigned long, the difference was
zero-padded thus wrongly sign-extended to s64. This issue affects all
32-bit architectures, does not affect 64-bit architectures where long
and s64 are equivalent.

In this function, dirty is between freerun and limit, the pseudo-float x
is between [-1,1], expected to be negative about half the time. With
zero-padding, instead of a small negative x we obtained a large positive
one so bdi_position_ratio() returned garbage.

Casting the difference to s64 also prevents overflow with left-shift;
though normally these numbers are small and I never observed a 32-bit
overflow there.

(This patch does not solve the PAE OOM issue.)

Paul Szabo   psz@maths.usyd.edu.au   http://www.maths.usyd.edu.au/u/psz/
School of Mathematics and Statistics   University of Sydney    Australia

Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Paul Szabo <psz@maths.usyd.edu.au>
Reference: http://bugs.debian.org/695182
Signed-off-by: Paul Szabo <psz@maths.usyd.edu.au>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

posix_acl: handle NULL ACL in posix_acl_equiv_mode

commit 50c6e282bdf5e8dabf8d7cf7b162545a55645fd9 upstream.

Various filesystems don't bother checking for a NULL ACL in
posix_acl_equiv_mode, and thus can dereference a NULL pointer when it
gets passed one. This usually happens from the NFS server, as the ACL tools
never pass a NULL ACL, but instead of one representing the mode bits.

Instead of adding boilerplat to all filesystems put this check into one place,
which will allow us to remove the check from other filesystems as well later
on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ben Greear <greearb@candelatech.com>
Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>,
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFSd: call rpc_destroy_wait_queue() from free_client()

commit 4cb57e3032d4e4bf5e97780e9907da7282b02b0c upstream.

Mainly to ensure that we don't leave any hanging timers.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFSd: Move default initialisers from create_client() to alloc_client()

commit 5694c93e6c4954fa9424c215f75eeb919bddad64 upstream.

Aside from making it clearer what is non-trivial in create_client(), it
also fixes a bug whereby we can call free_client() before idr_init()
has been called.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Also move initialisation of nfs4_client::cl_strhash, but
   not nfs4_client::cl_revoked]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

md: avoid possible spinning md thread at shutdown.

commit 0f62fb220aa4ebabe8547d3a9ce4a16d3c045f21 upstream.

If an md array with externally managed metadata (e.g. DDF or IMSM)
is in use, then we should not set safemode==2 at shutdown because:

1/ this is ineffective: user-space need to be involved in any 'safemode' handling,
2/ The safemode management code doesn't cope with safemode==2 on external metadata
   and md_check_recover enters an infinite loop.

Even at shutdown, an infinite-looping process can be problematic, so this
could cause shutdown to hang.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Input: elantech - fix touchpad initialization on Gigabyte U2442

commit 36189cc3cd57ab0f1cd75241f93fe01de928ac06 upstream.

The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2

Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"

Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.

https://bugzilla.kernel.org/show_bug.cgi?id=61151

Reported-by: Philipp Wolfer <ph.wolfer@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S

commit 2f433083e854ec72c19dc9b0e1cebcc8e230fd75 upstream.

This touchpad seriously dislikes init reports, not only timeing out, but
also refusing to work after this.

Reported-and-tested-by: Vincent Fortier <th0ma7@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

HID: usbhid: quirk for Synaptics Quad HD touchscreen

commit 12f508aede4bda5d20a2dd3ff3deb16ef47a97e9 upstream.

Add Synaptics HD touchscreen(06cb:1ac3) to no init report quirk

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

HID: usbhid: quirk for Synaptics HD touchscreen

commit d8e2e7581d2521910398c4c80d7a3b78e84da7d5 upstream.

Add Synaptics HD touchscreen(06cb:0ac3) to no init report quirk.

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

HID: usbhid: quirk for Synaptics Large Touchccreen

commit 8171a67d587a09e14a4949a81e070345fedcf410 upstream.

BugLink: http://bugs.launchpad.net/bugs/1180881
Synaptics large touchscreen doesn't support some of the report request
while initializing. The unspoorted request will make the device unreachable,
and will lead to the following usb_submit_urb() function call timeout.
So, add the IDs into HID_QUIRK_NO_INIT_REPORTS quirk.

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2:
 - Adjust context
 - Add definition of USB_VENDOR_ID_SYNAPTICS]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: Nokia 5300 should be treated as unusual dev

commit 6ed07d45d09bc2aa60e27b845543db9972e22a38 upstream.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: Nokia 305 should be treated as unusual dev

commit f0ef5d41792a46a1085dead9dfb0bdb2c574638e upstream.

Signed-off-by: Victor A. Santos <victoraur.santos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drivers/tty/hvc: don't free hvc_console_setup after init

commit 501fed45b7e8836ee9373f4d31e2d85e3db6103a upstream.

When 'console=hvc0' is specified to the kernel parameter in x86 KVM guest,
hvc console is setup within a kthread. However, that will cause SEGV
and the boot will fail when the driver is builtin to the kernel,
because currently hvc_console_setup() is annotated with '__init'. This
patch removes '__init' to boot the guest successfully with 'console=hvc0'.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: storage: shuttle_usbat: fix discs being detected twice

commit df602c2d2358f02c6e49cffc5b49b9daa16db033 upstream.

Even if the USB-to-ATAPI converter supported multiple LUNs, this
driver would always detect the same physical device or media because
it doesn't use srb->device->lun in any way.
Tested with an Hewlett-Packard CD-Writer Plus 8200e.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi

commit a3d0b1218d351c6e6f3cea36abe22236a08cb246 upstream.

There appear to be a crop of new hardware where the vbios is not
available from PROM/PRAMIN, but there is a valid _ROM method in ACPI.
The data read from PCIROM almost invariably contains invalid
instructions (still has the x86 opcodes), which makes this a low-risk
way to try to obtain a valid vbios image.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

media-device: fix infoleak in ioctl media_enum_entities()

commit e6a623460e5fc960ac3ee9f946d3106233fd28d8 upstream.

This fixes CVE-2014-1739.

Signed-off-by: Salva Peiró <speiro@ai2.upv.es>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()

commit 3234f5b06fc3094176a86772cc64baf3decc98fc upstream.

Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs')
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]

rtlwifi: rtl8192cu: Fix too long disable of IRQs

commit a53268be0cb9763f11da4f6fe3fb924cbe3a7d4a upstream.

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192cu.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

timer: Prevent overflow in apply_slack

commit 98a01e779f3c66b0b11cd7e64d531c0e41c95762 upstream.

On architectures with sizeof(int) < sizeof (long), the
computation of mask inside apply_slack() can be undefined if the
computed bit is > 32.

E.g. with: expires = 0xffffe6f5 and slack = 25, we get:

expires_limit = 0x20000000e
bit = 33
mask = (1 << 33) - 1  /* undefined */

On x86, mask becomes 1 and and the slack is not applied properly.
On s390, mask is -1, expires is set to 0 and the timer fires immediately.

Use 1UL << bit to solve that issue.

Suggested-by: Deborah Townsend <dstownse@us.ibm.com>
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hrtimer: Prevent remote enqueue of leftmost timers

commit 012a45e3f4af68e86d85cce060c6c2fed56498b2 upstream.

If a cpu is idle and starts an hrtimer which is not pinned on that
same cpu, the nohz code might target the timer to a different cpu.

In the case that we switch the cpu base of the timer we already have a
sanity check in place, which determines whether the timer is earlier
than the current leftmost timer on the target cpu. In that case we
enqueue the timer on the current cpu because we cannot reprogram the
clock event device on the target.

If the timers base is already the target CPU we do not have this
sanity check in place so we enqueue the timer as the leftmost timer in
the target cpus rb tree, but we cannot reprogram the clock event
device on the target cpu. So the timer expires late and subsequently
prevents the reprogramming of the target cpu clock event device until
the previously programmed event fires or a timer with an earlier
expiry time gets enqueued on the target cpu itself.

Add the same target check as we have for the switch base case and
start the timer on the current cpu if it would become the leftmost
timer on the target.

[ tglx: Rewrote subject and changelog ]

Signed-off-by: Leon Ma <xindong.ma@intel.com>
Link: http://lkml.kernel.org/r/1398847391-5994-1-git-send-email-xindong.ma@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hrtimer: Prevent all reprogramming if hang detected

commit 6c6c0d5a1c949d2e084706f9e5fb1fccc175b265 upstream.

If the last hrtimer interrupt detected a hang it sets hang_detected=1
and programs the clock event device with a delay to let the system
make progress.

If hang_detected == 1, we prevent reprogramming of the clock event
device in hrtimer_reprogram() but not in hrtimer_force_reprogram().

This can lead to the following situation:

hrtimer_interrupt()
   hang_detected = 1;
   program ce device to Xms from now (hang delay)

We have two timers pending:
   T1 expires 50ms from now
   T2 expires 5s from now

Now T1 gets canceled, which causes hrtimer_force_reprogram() to be
invoked, which in turn programs the clock event device to T2 (5
seconds from now).

Any hrtimer_start after that will not reprogram the hardware due to
hang_detected still being set. So we effectivly block all timers until
the T2 event fires and cleans up the hang situation.

Add a check for hang_detected to hrtimer_force_reprogram() which
prevents the reprogramming of the hang delay in the hardware
timer. The subsequent hrtimer_interrupt will resolve all outstanding
issues.

[ tglx: Rewrote subject and changelog and fixed up the comment in
   hrtimer_force_reprogram() ]

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: http://lkml.kernel.org/r/53602DC6.2060101@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mpt2sas: Don't disable device twice at suspend.

commit af61e27c3f77c7623b5335590ae24b6a5c323e22 upstream.

On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which
in turn calls pci_disable_device if the device is enabled prior to
suspending. However, _scsih_suspend also calls pci_disable_device
itself.

Thus, in the event that the device is enabled prior to suspending,
pci_disable_device will be called twice. This patch removes the
duplicate call to pci_disable_device in _scsi_suspend as it is both
unnecessary and results in a kernel oops.

Signed-off-by: Tyler Stachecki <tstache1@binghamton.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ftrace/module: Hardcode ftrace_module_init() call into load_module()

commit a949ae560a511fe4e3adf48fa44fefded93e5c2b upstream.

A race exists between module loading and enabling of function tracer.

CPU 1 CPU 2
----- -----
  load_module()
   module->state = MODULE_STATE_COMING

register_ftrace_function()
 mutex_lock(&ftrace_lock);
 ftrace_startup()
  update_ftrace_function();
   ftrace_arch_code_modify_prepare()
    set_all_module_text_rw();
   <enables-ftrace>
    ftrace_arch_code_modify_post_process()
     set_all_module_text_ro();

[ here all module text is set to RO,
  including the module that is
  loading!! ]

   blocking_notifier_call_chain(MODULE_STATE_COMING);
    ftrace_init_module()

     [ tries to modify code, but it's RO, and fails!
       ftrace_bug() is called]

When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.

The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.

The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.

Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com
Reported-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KVM: async_pf: mm->mm_users can not pin apf->mm

commit 41c22f626254b9dc0376928cae009e73d1b6a49a upstream.

get_user_pages(mm) is simply wrong if mm->mm_users == 0 and exit_mmap/etc
was already called (or is in progress), mm->mm_count can only pin mm->pgd
and mm_struct itself.

Change kvm_setup_async_pf/async_pf_execute to inc/dec mm->mm_users.

kvm_create_vm/kvm_destroy_vm play with ->mm_count too but this case looks
fine at first glance, it seems that this ->mm is only used to verify that
current->mm == kvm->mm.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

kvm: remove .done from struct kvm_async_pf

commit 98fda169290b3b28c0f2db2b8f02290c13da50ef upstream.

'.done' is used to mark the completion of 'async_pf_execute()', but
'cancel_work_sync()' returns true when the work was canceled, so we
use it instead.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

kvm: free resources after canceling async_pf

commit 28b441e24088081c1e213139d1303b451a34a4f4 upstream.

When we cancel 'async_pf_execute()', we should behave as if the work was
never scheduled in 'kvm_setup_async_pf()'.
Fixes a bug when we can't unload module because the vm wasn't destroyed.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

crypto: caam - add allocation failure handling in SPRINTFCAT macro

commit 27c5fb7a84242b66bf1e0b2fe6bf40d19bcc5c04 upstream.

GFP_ATOMIC memory allocation could fail.
In this case, avoid NULL pointer dereference and notify user.

Cc: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Bluetooth: Add support for Lite-on [04ca:3007]

commit 1fb4e09a7e780b915dbd172592ae7e2a4c071065 upstream.

Add support for the AR9462 chip

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3007 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Bluetooth: Fix redundant encryption request for reauthentication

commit 09da1f3463eb81d59685df723b1c5950b7570340 upstream.

When we're performing reauthentication (in order to elevate the
security level from an unauthenticated key to an authenticated one) we
do not need to issue any encryption command once authentication
completes. Since the trigger for the encryption HCI command is the
ENCRYPT_PEND flag this flag should not be set in this scenario.
Instead, the REAUTH_PEND flag takes care of all necessary steps for
reauthentication.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
[bwh: Backported to 3.2:
 - Adjust context
 - s/conn->flags/conn->pend/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2

commit cbd75e97a525e3819c02dc18bc2d67aa544c9e45 upstream.

We already check that the buffer object we're accessing is registered with
the file. Now also make sure that we can't DMA across buffer object boundaries.

v2: Code commenting update.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Input: synaptics - add min/max quirk for ThinkPad Edge E431

commit 27a38856a948c3e8de30dc71647ff9e1778c99fc upstream.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rt2x00: fix beaconing on USB

commit 8834d3608cc516f13e2e510f4057c263f3d2ce42 upstream.

When disable beaconing we clear register with beacon and newer set it
back, what make we stop send beacons infinitely.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

thinkpad-acpi: fix issuing duplicated key events for brightness up/down

commit ff413195e830541afeae469fc866ecd0319abd7e upstream.

The tp_features.bright_acpimode will not be set correctly for brightness
control because ACPI_VIDEO_HID will not be located in ACPI. As a result,
a duplicated key event will always be sent. acpi_video_backlight_support()
is sufficient to detect standard ACPI brightness control.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net-gro: reset skb->truesize in napi_reuse_skb()

[ Upstream commit e33d0ba8047b049c9262fdb1fcafb93cb52ceceb ]

Recycling skb always had been very tough...

This time it appears GRO layer can accumulate skb->truesize
adjustments made by drivers when they attach a fragment to skb.

skb_gro_receive() can only subtract from skb->truesize the used part
of a fragment.

I spotted this problem seeing TcpExtPruneCalled and
TcpExtTCPRcvCollapsed that were unexpected with a recent kernel, where
TCP receive window should be sized properly to accept traffic coming
from a driver not overshooting skb->truesize.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

skb: Add inline helper for getting the skb end offset from head

[ Upstream commit ec47ea82477404631d49b8e568c71826c9b663ac ]

With the recent changes for how we compute the skb truesize it occurs to me
we are probably going to have a lot of calls to skb_end_pointer -
skb->head.  Instead of running all over the place doing that it would make
more sense to just make it a separate inline skb_end_offset(skb) that way
we can return the correct value without having gcc having to do all the
optimization to cancel out skb->head - skb->head.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipv4: initialise the itag variable in __mkroute_input

[ Upstream commit fbdc0ad095c0a299e9abf5d8ac8f58374951149a ]

the value of itag is a random value from stack, and may not be initiated by
fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID
is not set

This will make the cached dst uncertainty

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

act_mirred: do not drop packets when fails to mirror it

[ Upstream commit 16c0b164bd24d44db137693a36b428ba28970c62 ]

We drop packet unconditionally when we fail to mirror it. This is not intended
in some cases. Consdier for kvm guest, we may mirror the traffic of the bridge
to a tap device used by a VM. When kernel fails to mirror the packet in
conditions such as when qemu crashes or stop polling the tap, it's hard for the
management software to detect such condition and clean the the mirroring
before. This would lead all packets to the bridge to be dropped and break the
netowrk of other virtual machines.

To solve the issue, the patch does not drop packets when kernel fails to mirror
it, and only drop the redirected packets.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

macvlan: Don't propagate IFF_ALLMULTI changes on down interfaces.

[ Upstream commit bbeb0eadcf9fe74fb2b9b1a6fea82cd538b1e556 ]

Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti
overflow on the underlying interface.

Attempting the set IFF_ALLMULTI on the underlying interface would cause an
error and the log message:

"allmulti touches root, set allmulti failed."

Signed-off-by: Peter Christensen <pch@ordbogen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipv4: fib_semantics: increment fib_info_cnt after fib_info allocation

[ Upstream commit aeefa1ecfc799b0ea2c4979617f14cecd5cccbfd ]

Increment fib_info_cnt in fib_create_info() right after successfuly
alllocating fib_info structure, overwise fib_metrics allocation failure
leads to fib_info_cnt incorrectly decremented in free_fib_info(), called
on error path from fib_create_info().

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: ipv4: ip_forward: fix inverted local_df test

[ Upstream commit ca6c5d4ad216d5942ae544bbf02503041bd802aa ]

local_df means 'ignore DF bit if set', so if its set we're
allowed to perform ip fragmentation.

This wasn't noticed earlier because the output path also drops such skbs
(and emits needed icmp error) and because netfilter ip defrag did not
set local_df until couple of days ago.

Only difference is that DF-packets-larger-than MTU now discarded
earlier (f.e. we avoid pointless netfilter postrouting trip).

While at it, drop the repeated test ip_exceeds_mtu, checking it once
is enough...

Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp_cubic: fix the range of delayed_ack

[ Upstream commit 0cda345d1b2201dd15591b163e3c92bad5191745 ]

commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent
divide error) try to prevent divide error, but there is still a little
chance that delayed_ack can reach zero. In case the param cnt get
negative value, then ratio+cnt would overflow and may happen to be zero.
As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero.

In some old kernels, such as 2.6.32, there is a bug that would
pass negative param, which then ultimately leads to this divide error.

commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count
with skb MSS) fixed the negative param issue. However,
it's safe that we fix the range of delayed_ack as well,
to make sure we do not hit a divide by zero.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Liu Yu <allanyuliu@tencent.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Revert "macvlan : fix checksums error when we are in bridge mode"

[ Upstream commit f114890cdf84d753f6b41cd0cc44ba51d16313da ]

This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019.
The commit above doesn't appear to be necessary any more as the
checksums appear to be correctly computed/validated.

Additionally the above commit breaks kvm configurations where
one VM is using a device that support checksum offload (virtio) and
the other VM does not.
In this case, packets leaving virtio device will have CHECKSUM_PARTIAL
set.  The packets is forwarded to a macvtap that has offload features
turned off.  Since we use CHECKSUM_UNNECESSARY, the host does does not
update the checksum and thus a bad checksum is passed up to
the guest.

CC: Daniel Lezcano <daniel.lezcano@free.fr>
CC: Patrick McHardy <kaber@trash.net>
CC: Andrian Nord <nightnord@gmail.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sctp: reset flowi4_oif parameter on route lookup

[ Upstream commit 85350871317a5adb35519d9dc6fc9e80809d42ad ]

commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is
in output route lookups.) introduces another regression which
is very similar to the problem of commit e6b45241c (ipv4: reset
flowi parameters on route connect) wants to fix:
Before we call ip_route_output_key() in sctp_v4_get_dst() to
get a dst that matches a bind address as the source address,
we have already called this function previously and the flowi
parameters have been initialized including flowi4_oif, so when
we call this function again, the process in __ip_route_output_key()
will be different because of the setting of flowi4_oif, and we'll
get a networking device which corresponds to the inputted flowi4_oif
as the output device, this is wrong because we'll never hit this
place if the previously returned source address of dst match one
of the bound addresses.

To reproduce this problem, a vlan setting is enough:
  # ifconfig eth0 up
  # route del default
  # vconfig add eth0 2
  # vconfig add eth0 3
  # ifconfig eth0.2 10.0.1.14 netmask 255.255.255.0
  # route add default gw 10.0.1.254 dev eth0.2
  # ifconfig eth0.3 10.0.0.14 netmask 255.255.255.0
  # ip rule add from 10.0.0.14 table 4
  # ip route add table 4 default via 10.0.0.254 src 10.0.0.14 dev eth0.3
  # sctp_darn -H 10.0.0.14 -P 36422 -h 10.1.4.134 -p 36422 -s -I
You'll detect that all the flow are routed to eth0.2(10.0.1.254).

Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

bridge: Handle IFLA_ADDRESS correctly when creating bridge device

[ Upstream commit 30313a3d5794472c3548d7288e306a5492030370 ]

When bridge device is created with IFLA_ADDRESS, we are not calling
br_stp_change_bridge_id(), which leads to incorrect local fdb
management and bridge id calculation, and prevents us from receiving
frames on the bridge device.

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set

[ Upstream commit c53864fd60227de025cb79e05493b13f69843971 ]

Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with
buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST
attribute if they were solicited by a GETLINK message containing an
IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag.

That was done because some user programs broke when they received more data
than expected - because IFLA_VFINFO_LIST contains information for each VF
it can become large if there are many VFs.

However, the IFLA_VF_PORTS attribute, supplied for devices which implement
ndo_get_vf_port (currently the 'enic' driver only), has the same problem.
It supplies per-VF information and can therefore become large, but it is
not currently conditional on the IFLA_EXT_MASK value.

Worse, it interacts badly with the existing EXT_MASK handling.  When
IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at
NLMSG_GOODSIZE.  If the information for IFLA_VF_PORTS exceeds this, then
rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet.
netlink_dump() will misinterpret this as having finished the listing and
omit data for this interface and all subsequent ones.  That can cause
getifaddrs(3) to enter an infinite loop.

This patch addresses the problem by only supplying IFLA_VF_PORTS when
IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtnetlink: Warn when interface's information won't fit in our packet

[ Upstream commit 973462bbde79bb827824c73b59027a0aed5c9ca6 ]

Without IFLA_EXT_MASK specified, the information reported for a single
interface in response to RTM_GETLINK is expected to fit within a netlink
packet of NLMSG_GOODSIZE.

If it doesn't, however, things will go badly wrong,  When listing all
interfaces, netlink_dump() will incorrectly treat -EMSGSIZE on the first
message in a packet as the end of the listing and omit information for
that interface and all subsequent ones.  This can cause getifaddrs(3) to
enter an infinite loop.

This patch won't fix the problem, but it will WARN_ON() making it easier to
track down what's going wrong.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled

commit ba67b510035141bd89b40bf65efa0a79834311ca upstream.

The patch fixes a problem with dropped jumbo frames after usage of
'ethtool -G ... rx'.

Scenario:
1. ip link set eth0 up
2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo
3. ip link set mtu 9000 dev eth0

The ethtool command set rx_jumbo_pending to zero so any received jumbo
packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N'
to workaround the issue.
The patch changes the logic so rx_jumbo_pending value is changed only if
jumbo frames are enabled (MTU > 1500).

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

filter: prevent nla extensions to peek beyond the end of the message

[ Upstream commit 05ab8f2647e4221cbdb3856dd7d32bd5407316b3 ]

The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check
for a minimal message length before testing the supplied offset to be
within the bounds of the message. This allows the subtraction of the nla
header to underflow and therefore -- as the data type is unsigned --
allowing far to big offset and length values for the search of the
netlink attribute.

The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is
also wrong. It has the minuend and subtrahend mixed up, therefore
calculates a huge length value, allowing to overrun the end of the
message while looking for the netlink attribute.

The following three BPF snippets will trigger the bugs when attached to
a UNIX datagram socket and parsing a message with length 1, 2 or 3.

 ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]--
 | ld #0x87654321
 | ldx #42
 | ld #nla
 | ret a
 `---

 ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]--
 | ld #0x87654321
 | ldx #42
 | ld #nlan
 | ret a
 `---

 ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]--
 | ; (needs a fake netlink header at offset 0)
 | ld #0
 | ldx #42
 | ld #nlan
 | ret a
 `---

Fix the first issue by ensuring the message length fulfills the minimal
size constrains of a nla header. Fix the second bug by getting the math
for the remainder calculation right.

Fixes: 4738c1db15 ("[SKFILTER]: Add SKF_ADF_NLATTR instruction")
Fixes: d214c7537b ("filter: add SKF_AD_NLATTR_NEST to look for nested..")
Cc: Patrick McHardy <kaber@trash.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Fix misplacement of the first check due to a bug in the patch program]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: ipv4: current group_info should be put after using.

[ Upstream commit b04c46190219a4f845e46a459e3102137b7f6cac ]

Plug a group_info refcount leak in ping_init.
group_info is only needed during initialization and
the code failed to release the reference on exit.
While here move grabbing the reference to a place
where it is actually needed.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Signed-off-by: xiaoming wang <xiaoming.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipv6: Limit mtu to 65575 bytes

[ Upstream commit 30f78d8ebf7f514801e71b88a10c948275168518 ]

Francois reported that setting big mtu on loopback device could prevent
tcp sessions making progress.

We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets.

We must limit the IPv6 MTU to (65535 + 40) bytes in theory.

Tested:

ifconfig lo mtu 70000
netperf -H ::1

Before patch : Throughput :   0.05 Mbits

After patch : Throughput : 35484 Mbits

Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

bonding: Remove debug_fs files when module init fails

[ Upstream commit db29868653394937037d71dc3545768302dda643 ]

Remove the bonding debug_fs entries when the
module initialization fails. The debug_fs
entries should be removed together with all other
already allocated resources.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: core: don't account for udp header size when computing seglen

[ Upstream commit 6d39d589bb76ee8a1c6cde6822006ae0053decff ]

In case of tcp, gso_size contains the tcpmss.

For UFO (udp fragmentation offloading) skbs, gso_size is the fragment
payload size, i.e. we must not account for udp header size.

Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet
will be needlessly fragmented in the forward path, because we think its
individual segments are too large for the outgoing link.

Fixes: fe6cc55f3a9a053 ("net: ip, ipv6: handle gso skbs in forwarding path")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

l2tp: take PMTU from tunnel UDP socket

[ Upstream commit f34c4a35d87949fbb0e0f31eba3c054e9f8199ba ]

When l2tp driver tries to get PMTU for the tunnel destination, it uses
the pointer to struct sock that represents PPPoX socket, while it
should use the pointer that represents UDP socket of the tunnel.

Signed-off-by: Dmitry Petukhov <dmgenp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracepoint: Do not waste memory on mods with no tracepoints

commit 7dec935a3aa04412cba2cebe1524ae0d34a30c24 upstream.

No reason to allocate tp_module structures for modules that have no
tracepoints. This just wastes memory.

Fixes: b75ef8b44b1c "Tracepoint: Dissociate from module mutex"
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netfilter: Can't fail and free after table replacement

commit c58dd2dd443c26d856a168db108a0cd11c285bf3 upstream.

All xtables variants suffer from the defect that the copy_to_user()
to copy the counters to user memory may fail after the table has
already been exchanged and thus exposed. Return an error at this
point will result in freeing the already exposed table. Any
subsequent packet processing will result in a kernel panic.

We can't copy the counters before exposing the new tables as we
want provide the counter state after the old table has been
unhooked. Therefore convert this into a silent error.

Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tgafb: fix mode setting with fbset

commit 624966589041deb32a2626ee2e176e8274581101 upstream.

Mode setting in the TGA driver is broken for these reasons:

- info->fix.line_length is set just once in tgafb_init_fix function. If
  we change videomode, info->fix.line_length is not recalculated - so
  the video mode is changed but the screen is corrupted because of wrong
  info->fix.line_length.

- info->fix.smem_len is set in tgafb_init_fix to the size of the default
  video mode (640x480). If we set a higher resolution,
  info->fix.smem_len is smaller than the current screen size, preventing
  the userspace program from mapping the framebuffer.

This patch fixes it:

- info->fix.line_length initialization is moved to tgafb_set_par so that
  it is recalculated with each mode change.

- info->fix.smem_len is set to a fixed value representing the real
  amount of video ram (the values are taken from xfree86 driver).

- add a check to tgafb_check_var to prevent us from setting a videomode
  that doesn't fit into videoram.

- in tgafb_register, tgafb_init_fix is moved upwards, to be called
  before fb_find_mode (because fb_find_mode already needs the videoram
  size set in tgafb_init_fix).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vga.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ACPI / EC: Process rather than discard events in acpi_ec_clear

commit 3eba563e280101209bad27d40bfc83ddf1489234 upstream.

Address a regression caused by commit ad332c8a4533:
(ACPI / EC: Clear stale EC events on Samsung systems)

After the earlier patch, there was found to be a race condition on some
earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was
sometimes discarding a new EC event before its GPE was triggered by the
system. In the case of these systems, this meant that the "lid open"
event was not registered on resume if that was the cause of the wake,
leading to problems when attempting to close the lid to suspend again.

After testing on a number of Samsung systems, both those affected by the
previous EC bug and those affected by the race condition, it seemed that
the best course of action was to process rather than discard the events.
On Samsung systems which accumulate stale EC events, there does not seem
to be any adverse side-effects of running the associated _Q methods.

This patch adds an argument to the static function acpi_ec_sync_query so
that it may be used within the acpi_ec_clear loop in place of
acpi_ec_query_unlocked which was used previously.

With thanks to Stefan Biereigel for reporting the issue, and for all the
people who helped test the new patch on affected systems.

Fixes: ad332c8a4533 (ACPI / EC: Clear stale EC events on Samsung systems)
References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173
Reported-by: Stefan Biereigel <stefan@biereigel.de>
Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
Tested-by: Stefan Biereigel <stefan@biereigel.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Nicolas Porcel <nicolasporcel06@gmail.com>
Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Tested-by: Giannis Koutsou <giannis.koutsou@gmail.com>
Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ACPI / EC: Clear stale EC events on Samsung systems

commit ad332c8a45330d170bb38b95209de449b31cd1b4 upstream.

A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc)
continue to log events during sleep (lid open/close, AC plug/unplug,
battery level change), which accumulate in the EC until a buffer fills.
After the buffer is full (tests suggest it holds 8 events), GPEs stop
being triggered for new events. This state persists on wake or even on
power cycle, and prevents new events from being registered until the EC
is manually polled.

This is the root cause of a number of bugs, including AC not being
detected properly, lid close not triggering suspend, and low ambient
light not triggering the keyboard backlight. The bug also seemed to be
responsible for performance issues on at least one user's machine.

Juan Manuel Cabo found the cause of bug and the workaround of polling
the EC manually on wake.

The loop which clears the stale events is based on an earlier patch by
Lan Tianyu (see referenced attachment).

This patch:
 - Adds a function acpi_ec_clear() which polls the EC for stale _Q
   events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is
   logged if this limit is reached.
 - Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI
   system vendor is Samsung. This check could be replaced by several
   more specific DMI vendor/product pairs, but it's likely that the bug
   affects more Samsung products than just the five series mentioned
   above. Further, it should not be harmful to run acpi_ec_clear() on
   systems without the bug; it will return immediately after finding no
   data waiting.
 - Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add()
 - Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions()

References: https://bugzilla.kernel.org/show_bug.cgi?id=44161
References: https://bugzilla.kernel.org/show_bug.cgi?id=45461
References: https://bugzilla.kernel.org/show_bug.cgi?id=57271
References: https://bugzilla.kernel.org/attachment.cgi?id=126801
Suggested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
Reviewed-by: Lan Tianyu <tianyu.lan@intel.com>
Reviewed-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
Tested-by: San Zamoyski <san@plusnet.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[bwh: Backported to 3.2:
 - Adjust context
 - acpi_ec::mutex was called lock]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

powerpc: Add vr save/restore functions

commit 8fe9c93e7453e67b8bd09f263ec1bb0783c733fc upstream.

GCC 4.8 now generates out-of-line vr save/restore functions when
optimizing for size.  They are needed for the raid6 altivec support.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Linux 3.2.59

floppy: don't write kernel-only members to FDRAWCMD ioctl output

commit 2145e15e0557a01b9195d1c7199a1b92cb9be81f upstream.

Do not leak kernel-only floppy_raw_cmd structure members to userspace.
This includes the linked-list pointer and the pointer to the allocated
DMA space.

Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

floppy: ignore kernel-only members in FDRAWCMD ioctl input

commit ef87dbe7614341c2e7bfe8d32fcb7028cc97442c upstream.

Always clear out these floppy_raw_cmd struct members after copying the
entire structure from userspace so that the in-kernel version is always
valid and never left in an interdeterminate state.

Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

n_tty: Fix n_tty_write crash when echoing in raw mode

commit 4291086b1f081b869c6d79e5b7441633dc3ace00 upstream.

The tty atomic_write_lock does not provide an exclusion guarantee for
the tty driver if the termios settings are LECHO & !OPOST.  And since
it is unexpected and not allowed to call TTY buffer helpers like
tty_insert_flip_string concurrently, this may lead to crashes when
concurrect writers call pty_write. In that case the following two
writers:
* the ECHOing from a workqueue and
* pty_write from the process
race and can overflow the corresponding TTY buffer like follows.

If we look into tty_insert_flip_string_fixed_flag, there is:
  int space = __tty_buffer_request_room(port, goal, flags);
  struct tty_buffer *tb = port->buf.tail;
  ...
  memcpy(char_buf_ptr(tb, tb->used), chars, space);
  ...
  tb->used += space;

so the race of the two can result in something like this:
              A                                B
__tty_buffer_request_room
                                  __tty_buffer_request_room
memcpy(buf(tb->used), ...)
tb->used += space;
                                  memcpy(buf(tb->used), ...) ->BOOM

B's memcpy is past the tty_buffer due to the previous A's tb->used
increment.

Since the N_TTY line discipline input processing can output
concurrently with a tty write, obtain the N_TTY ldisc output_lock to
serialize echo output with normal tty writes.  This ensures the tty
buffer helper tty_insert_flip_string is not called concurrently and
everything is fine.

Note that this is nicely reproducible by an ordinary user using
forkpty and some setup around that (raw termios + ECHO). And it is
present in kernels at least after commit
d945cb9cce20ac7143c2de8d88b187f62db99bdc (pty: Rework the pty layer to
use the normal buffering logic) in 2.6.31-rc3.

js: add more info to the commit log
js: switch to bool
js: lock unconditionally
js: lock only the tty->ops->write call

References: CVE-2014-0196
Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: output_lock is a member of struct tty_struct]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtl8192ce: Fix null dereference in watchdog

Dmitry Semyonov reported that after upgrading from 3.2.54 to
3.2.57 the rtl8192ce driver will crash when its interface is brought
up.  The oops message shows:

[ 1833.611397] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 1833.611455] IP: [<ffffffffa0410c6a>] rtl92ce_update_hal_rate_tbl+0x29/0x4db [rtl8192ce]
...
[ 1833.613326] Call Trace:
[ 1833.613346]  [<ffffffffa02ad9c6>] ? rtl92c_dm_watchdog+0xd0b/0xec9 [rtl8192c_common]
[ 1833.613391]  [<ffffffff8105b5cf>] ? process_one_work+0x161/0x269
[ 1833.613425]  [<ffffffff8105c598>] ? worker_thread+0xc2/0x145
[ 1833.613458]  [<ffffffff8105c4d6>] ? manage_workers.isra.25+0x15b/0x15b
[ 1833.613496]  [<ffffffff8105f6d9>] ? kthread+0x76/0x7e
[ 1833.613527]  [<ffffffff81356b74>] ? kernel_thread_helper+0x4/0x10
[ 1833.613563]  [<ffffffff8105f663>] ? kthread_worker_fn+0x139/0x139
[ 1833.613598]  [<ffffffff81356b70>] ? gs_change+0x13/0x13

Disassembly of rtl92ce_update_hal_rate_tbl() shows that the 'sta'
parameter was null.  None of the changes to the rtlwifi family between
3.2.54 and 3.2.57 seem to directly cause this, and reverting commit
f78bccd79ba3 ('rtlwifi: rtl8192ce: Fix too long disable of IRQs')
doesn't fix it.

rtl92c_dm_watchdog() calls rtl92ce_update_hal_rate_tbl() via
rtl92c_dm_refresh_rate_adaptive_mask(), which does not appear in the
call trace as it was inlined.  That function has been completely
removed upstream which may explain why this crash wasn't seen there.

I'm not sure that it is sensible to completely remove
rtl92c_dm_refresh_rate_adaptive_mask() without making other
compensating changes elsewhere, so try to work around this for 3.2 by
checking for a null pointer in rtl92c_dm_refresh_rate_adaptive_mask()
and then skipping the call to rtl92ce_update_hal_rate_tbl().

References: https://bugs.debian.org/745137
References: https://bugs.debian.org/745462
Reported-by: Dmitry Semyonov <linulin@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>

usb: option: add and update a number of CMOTech devices

commit 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b upstream.

A number of older CMOTech modems are based on Qualcomm
chips.  The blacklisted interfaces are QMI/wwan.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: option: add Alcatel L800MA

commit dd6b48ecec2ea7d15f28d5e5474388681899a5e1 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/00/00 - serial AT+PPP
2: ff/ff/ff - QMI/wwan
3: 08/06/50 - storage

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>