Ville Syrjälä [Mon, 6 Apr 2009 15:32:04 +0000 (17:32 +0200)]
DSS2: Check fclk limits when configuring video planes
Check that the currect functional clock is fast enough to support
the requested scaling ratios. Also check if 5-tap filtering can be
used even though the downscaling ratio is less than 1:2 since the
functional clock rate required for 5-tap filtering can be less than
the requirement for 3-tap filtering, and 5-tap filtering should look
better.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Paul Walmsley [Wed, 28 Jan 2009 02:13:12 +0000 (19:13 -0700)]
[ARM] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
Filling the set_rate and round_rate fields of dpll4_m4_ck makes
this clock programmable through clk_set_rate(). This is needed
to give omapfb control over the dss1_alwon_fck rate.
This patch includes a fix from Tomi Valkeinen <tomi.valkeinen@nokia.com>.
Signed-off-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David Brownell [Tue, 25 Nov 2008 07:11:03 +0000 (23:11 -0800)]
USB: gadget: fix rndis working at high speed
Fix a bug specific to highspeed mode in the recently updated RNDIS
support: it wasn't setting up the high speed notification endpoint,
which prevented high speed RNDIS links from working.
Richard Röjfors [Sun, 16 Nov 2008 03:53:24 +0000 (19:53 -0800)]
USB: gadget rndis: send notifications
It turns out that atomic_inc_return() returns the *new* value
not the original one, so the logic in rndis_response_available()
kept the first RNDIS response notification from getting out.
This prevented interoperation with MS-Windows (but not Linux).
Fix this to make RNDIS behave again.
Signed-off-by: Richard Röjfors <richard.rojfors@endian.se> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 16 Nov 2008 03:53:21 +0000 (19:53 -0800)]
USB: gadget rndis: stop windows self-immolation
Somewhere in the conversion of the RNDIS gadget code to the new
framework, the descriptor of its data interface seems to have
been copied from the CDC Ethernet driver. Unfortunately that
means it got a nonzero altsetting ... which is incorrect. Issue
uncovered by Richard Röjfors <richard.rojfors@endian.se>.
This patch fixes that problem, and resolves at least some cases
of Windows XP bluescreening itself.
Tested-by: Richard Röjfors <richard.rojfors@endian.se>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This allows the device to act as mouse or scrolling device.
Mode can be switched by writing to special file in
/proc/pandora ("absolute", "mouse" and "scroll").
San Mehat [Mon, 14 Apr 2008 22:22:49 +0000 (15:22 -0700)]
mmc: Add concept of an 'embedded' SDIO device.
This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.
mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data
Adrian Hunter [Thu, 16 Oct 2008 13:37:23 +0000 (16:37 +0300)]
ARM: OMAP: calculate hsmmc data timeout accurately
The data timeout can be calculated from the clock
rate and timing values given by the card. At
present the timeout is set to the maximum value,
about 2.7 secs. When dealing with cards that do have
errors, this causes large unnecessary delays because
the correct timeout may be around 10 millisecs.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This patches moves the twl4030 power sequencer code to drivers/mfd and
updates the code for the new twl4030 framework. The code handles downloading
the scripts provided by the board configuration and configuring the chip
to call the relevant script for each event (processor group 1 and 2 sleep,
processor group 3 sleep, wakeup or warm reset).
Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tomi Valkeinen [Fri, 12 Dec 2008 07:48:53 +0000 (09:48 +0200)]
OMAP: wait for pwrdm transition after clk_enable()
Enabling clock in a disabled power domain causes the power domain to be
turned on. However, the power transition is not always finished when
clk_enable() returns and this randomly crashes the kernel when an
interrupt happens right after the clk_enable, and the kernel tries to
read the irq status register for that domain.
Why the irq status register is inaccessible, I don't know. Also it
doesn't seem to be related to the module being not powered up, but to
the transition itself.
The same could perhaps happen after clk_disable also, but I have not
witnessed that.
The problem affects at least dss, cam and sgx clocks.
This change waits for the transition to be finished before returning
from omap2_clkdm_clk_enable().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Wed, 26 Nov 2008 18:48:12 +0000 (10:48 -0800)]
OMAP2/3 GPTIMER: skip unnecessary TLDR write during non-autoreload
The GPTIMER TLDR register does not need to be written if the GPTIMER
is not in autoreload mode. This is the usual case for dynamic tick-enabled
kernels.
Simulation data indicate that skipping the read that occurs as part of
the write should save at least 300-320 ns for each GPTIMER1 timer
reprogram. (This assumes L4-Wakeup is at 19MHz and GPTIMER write
posting is enabled.) Skipping the write itself probably won't have
much impact since it should be posted on the OCP interconnect.
Tested on 2430SDP and 3430SDP.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Wed, 12 Nov 2008 15:05:41 +0000 (17:05 +0200)]
ASoC: Fix supported sample rates of TWL4030 audio codec
TWL4030 currently supports rates between 8 kHz and 48 kHz and sets the codec
mode register accordingly in twl4030_hw_params. Expose this info so that
ASoC can match other rates than 44.1 kHz or 48 kHz as well.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jarkko Nikula [Tue, 25 Nov 2008 10:45:09 +0000 (12:45 +0200)]
ASoC: OMAP: Add support for mono audio links in McBSP DAI
Patch adds support for mono audio links so that McBSP DAI can operate with
real mono codecs. In I2S, the signalling remains the same but only first
frame (left channel) is transmitting audio data and second frame having null
data. In DSP_A, only first frame is transmitted.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jarkko Nikula [Wed, 12 Nov 2008 15:05:51 +0000 (17:05 +0200)]
ASoC: OMAP: Add more supported sample rates into McBSP DAI driver
Originally it was put too tight limits to support only 44.1 kHz and 48 kHz
sample rates in McBSP DAI driver. Extend it now to 8 kHz - 96 kHz. With
96 kHz and 2*16 bits, bit clock is 3.072 MHz < 3.125 MHz (I2S max?).
Tested on Nokia N810 with TVL320AIC33 from rates 8 - 96 kHz and on Texas
Instruments Beagle with TWL4030 from rates 8 - 48 kHz.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Steve Sakoman <steve@sakoman.com> Acked-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jarkko Nikula [Wed, 22 Oct 2008 12:00:29 +0000 (15:00 +0300)]
ALSA: ASoC: OMAP: Continue fixing DSP DAI format in McBSP DAI driver
Fix "ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver" was not correct
due misunderstanding of DSP_A format and similar error in TLV320AIC33
codec which was used to test the original fix.
This patch corrects now DSP_A format in OMAP McBSP DAI driver and is
verified with TLV320AIC23 codec that's implementing DSP_A correctly.
Jarkko Nikula [Mon, 20 Oct 2008 12:29:59 +0000 (15:29 +0300)]
ALSA: ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver
Fix word clock length which must equal to one bit clock cycle in DSP mode.
Surprisingly McBSP is able synchronize into wrong length when it's
slave but e.g. TLV320AIC33 codec in slave configuration is outputting
some amount of noise if word clock length is longer than one bit clock
cycle.
Fix also bit clock and frame sync polarities in DSP mode since they are
opposite from I2S.
Jarkko Nikula [Thu, 9 Oct 2008 12:57:21 +0000 (15:57 +0300)]
ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver
This suits better when adding support for multiple links and different
link formats.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jarkko Nikula [Thu, 9 Oct 2008 12:57:22 +0000 (15:57 +0300)]
ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kalle Jokiniemi [Wed, 22 Oct 2008 06:47:06 +0000 (09:47 +0300)]
OMAP3 DSS: Fixed FIFO buffer register field sizes
The size status field in DISPC_[GFX | VID1 | VID2]_FIFO_SIZE_STATUS
register is 11 bits wide in OMAP3, but only 9 bits were read. Similarly,
the threshold field in DISPC_[GFX | VID1 | VID2]_FIFO_THRESHOLD register
is 12 bits wide, while only 9 bits were written in it.
This patch extends the bit field sizes used in setup_plane_fifo to
correspond to ones in OMAP3. In OMAP2 the extra bits are reserved, so no
harm should come from extending the bit fields.
Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Kalle Jokiniemi [Fri, 17 Oct 2008 06:46:08 +0000 (09:46 +0300)]
OMAP3: Remove CONFIG_OMAP_SYSOFFMODE flag
Remove CONFIG_OMAP_SYSOFFMODE flag and do the full initialization of voltage
controller . Enabling automatic sending of OFF command and selecting wether
SYS_OFF_MODE signal is used should be determined dynamically. Hence they are
now not set in the initialization.
The sleep voltage for OFF mode is changed to default 1,2V for VDD1 and
1,15V for VDD2. Using the 0,9V setting causes hangup.
Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Contreras [Fri, 24 Oct 2008 19:02:57 +0000 (12:02 -0700)]
alsa: add Beagleboard SoC configuration.
This is exactly the same as the overo configuration. It might make sense
to have them in a single one.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
# CHANGED to not spew messages about beagle on non-beagle boards Signed-off-by: Tony Lindgren <tony@atomide.com>
projects / pandora-kernel.git / log