drivers/media/common/saa7146_hlp.c

   1 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
   2
   3 #include <linux/kernel.h>
   4 #include <linux/export.h>
   5 #include <media/saa7146_vv.h>
   6
   7 static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
   8 {
   9         /* clear out the necessary bits */
  10         *clip_format &= 0x0000ffff;
  11         /* set these bits new */
  12         *clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
  13 }
  14
  15 static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
  16 {
  17         *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
  18         *hps_ctrl |= (source << 30) | (sync << 28);
  19 }
  20
  21 static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
  22 {
  23         int hyo = 0, hxo = 0;
  24
  25         hyo = vv->standard->v_offset;
  26         hxo = vv->standard->h_offset;
  27
  28         *hps_h_scale    &= ~(MASK_B0 | 0xf00);
  29         *hps_h_scale    |= (hxo <<  0);
  30
  31         *hps_ctrl       &= ~(MASK_W0 | MASK_B2);
  32         *hps_ctrl       |= (hyo << 12);
  33 }
  34
  35 /* helper functions for the calculation of the horizontal- and vertical
  36    scaling registers, clip-format-register etc ...
  37    these functions take pointers to the (most-likely read-out
  38    original-values) and manipulate them according to the requested
  39    changes.
  40 */
  41
  42 /* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
  43 static struct {
  44         u16 hps_coeff;
  45         u16 weight_sum;
  46 } hps_h_coeff_tab [] = {
  47         {0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
  48         {0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
  49         {0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
  50         {0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
  51         {0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
  52         {0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
  53         {0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  54         {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  55         {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  56         {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
  57         {0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
  58         {0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
  59         {0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
  60 };
  61
  62 /* table of attenuation values for horizontal scaling */
  63 static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
  64
  65 /* calculate horizontal scale registers */
  66 static int calculate_h_scale_registers(struct saa7146_dev *dev,
  67         int in_x, int out_x, int flip_lr,
  68         u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
  69 {
  70         /* horizontal prescaler */
  71         u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
  72         /* horizontal scaler */
  73         u32 xim = 0, xp = 0, xsci =0;
  74         /* vertical scale & gain */
  75         u32 pfuv = 0;
  76
  77         /* helper variables */
  78         u32 h_atten = 0, i = 0;
  79
  80         if ( 0 == out_x ) {
  81                 return -EINVAL;
  82         }
  83
  84         /* mask out vanity-bit */
  85         *hps_ctrl &= ~MASK_29;
  86
  87         /* calculate prescale-(xspc)-value:     [n   .. 1/2) : 1
  88                                                 [1/2 .. 1/3) : 2
  89                                                 [1/3 .. 1/4) : 3
  90                                                 ...             */
  91         if (in_x > out_x) {
  92                 xpsc = in_x / out_x;
  93         }
  94         else {
  95                 /* zooming */
  96                 xpsc = 1;
  97         }
  98
  99         /* if flip_lr-bit is set, number of pixels after
 100            horizontal prescaling must be < 384 */
 101         if ( 0 != flip_lr ) {
 102
 103                 /* set vanity bit */
 104                 *hps_ctrl |= MASK_29;
 105
 106                 while (in_x / xpsc >= 384 )
 107                         xpsc++;
 108         }
 109         /* if zooming is wanted, number of pixels after
 110            horizontal prescaling must be < 768 */
 111         else {
 112                 while ( in_x / xpsc >= 768 )
 113                         xpsc++;
 114         }
 115
 116         /* maximum prescale is 64 (p.69) */
 117         if ( xpsc > 64 )
 118                 xpsc = 64;
 119
 120         /* keep xacm clear*/
 121         xacm = 0;
 122
 123         /* set horizontal filter parameters (CXY = CXUV) */
 124         cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
 125         cxuv = cxy;
 126
 127         /* calculate and set horizontal fine scale (xsci) */
 128
 129         /* bypass the horizontal scaler ? */
 130         if ( (in_x == out_x) && ( 1 == xpsc ) )
 131                 xsci = 0x400;
 132         else
 133                 xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
 134
 135         /* set start phase for horizontal fine scale (xp) to 0 */
 136         xp = 0;
 137
 138         /* set xim, if we bypass the horizontal scaler */
 139         if ( 0x400 == xsci )
 140                 xim = 1;
 141         else
 142                 xim = 0;
 143
 144         /* if the prescaler is bypassed, enable horizontal
 145            accumulation mode (xacm) and clear dcgx */
 146         if( 1 == xpsc ) {
 147                 xacm = 1;
 148                 dcgx = 0;
 149         } else {
 150                 xacm = 0;
 151                 /* get best match in the table of attenuations
 152                    for horizontal scaling */
 153                 h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
 154
 155                 for (i = 0; h_attenuation[i] != 0; i++) {
 156                         if (h_attenuation[i] >= h_atten)
 157                                 break;
 158                 }
 159
 160                 dcgx = i;
 161         }
 162
 163         /* the horizontal scaling increment controls the UV filter
 164            to reduce the bandwidth to improve the display quality,
 165            so set it ... */
 166         if ( xsci == 0x400)
 167                 pfuv = 0x00;
 168         else if ( xsci < 0x600)
 169                 pfuv = 0x01;
 170         else if ( xsci < 0x680)
 171                 pfuv = 0x11;
 172         else if ( xsci < 0x700)
 173                 pfuv = 0x22;
 174         else
 175                 pfuv = 0x33;
 176
 177
 178         *hps_v_gain  &= MASK_W0|MASK_B2;
 179         *hps_v_gain  |= (pfuv << 24);
 180
 181         *hps_h_scale    &= ~(MASK_W1 | 0xf000);
 182         *hps_h_scale    |= (xim << 31) | (xp << 24) | (xsci << 12);
 183
 184         *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
 185
 186         return 0;
 187 }
 188
 189 static struct {
 190         u16 hps_coeff;
 191         u16 weight_sum;
 192 } hps_v_coeff_tab [] = {
 193  {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
 194  {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
 195  {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
 196  {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
 197  {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
 198  {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
 199  {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 200  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 201  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 202  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
 203  {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
 204  {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
 205  {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
 206 };
 207
 208 /* table of attenuation values for vertical scaling */
 209 static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
 210
 211 /* calculate vertical scale registers */
 212 static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
 213         int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
 214 {
 215         int lpi = 0;
 216
 217         /* vertical scaling */
 218         u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
 219         /* vertical scale & gain */
 220         u32 dcgy = 0, cya_cyb = 0;
 221
 222         /* helper variables */
 223         u32 v_atten = 0, i = 0;
 224
 225         /* error, if vertical zooming */
 226         if ( in_y < out_y ) {
 227                 return -EINVAL;
 228         }
 229
 230         /* linear phase interpolation may be used
 231            if scaling is between 1 and 1/2 (both fields used)
 232            or scaling is between 1/2 and 1/4 (if only one field is used) */
 233
 234         if (V4L2_FIELD_HAS_BOTH(field)) {
 235                 if( 2*out_y >= in_y) {
 236                         lpi = 1;
 237                 }
 238         } else if (field == V4L2_FIELD_TOP
 239                 || field == V4L2_FIELD_ALTERNATE
 240                 || field == V4L2_FIELD_BOTTOM) {
 241                 if( 4*out_y >= in_y ) {
 242                         lpi = 1;
 243                 }
 244                 out_y *= 2;
 245         }
 246         if( 0 != lpi ) {
 247
 248                 yacm = 0;
 249                 yacl = 0;
 250                 cya_cyb = 0x00ff;
 251
 252                 /* calculate scaling increment */
 253                 if ( in_y > out_y )
 254                         ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
 255                 else
 256                         ysci = 0;
 257
 258                 dcgy = 0;
 259
 260                 /* calculate ype and ypo */
 261                 ype = ysci / 16;
 262                 ypo = ype + (ysci / 64);
 263
 264         } else {
 265                 yacm = 1;
 266
 267                 /* calculate scaling increment */
 268                 ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
 269
 270                 /* calculate ype and ypo */
 271                 ypo = ype = ((ysci + 15) / 16);
 272
 273                 /* the sequence length interval (yacl) has to be set according
 274                    to the prescale value, e.g.  [n   .. 1/2) : 0
 275                                                 [1/2 .. 1/3) : 1
 276                                                 [1/3 .. 1/4) : 2
 277                                                 ... */
 278                 if ( ysci < 512) {
 279                         yacl = 0;
 280                 } else {
 281                         yacl = ( ysci / (1024 - ysci) );
 282                 }
 283
 284                 /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
 285                 cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
 286
 287                 /* get best match in the table of attenuations for vertical scaling */
 288                 v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
 289
 290                 for (i = 0; v_attenuation[i] != 0; i++) {
 291                         if (v_attenuation[i] >= v_atten)
 292                                 break;
 293                 }
 294
 295                 dcgy = i;
 296         }
 297
 298         /* ypo and ype swapped in spec ? */
 299         *hps_v_scale    |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
 300
 301         *hps_v_gain     &= ~(MASK_W0|MASK_B2);
 302         *hps_v_gain     |= (dcgy << 16) | (cya_cyb << 0);
 303
 304         return 0;
 305 }
 306
 307 /* simple bubble-sort algorithm with duplicate elimination */
 308 static int sort_and_eliminate(u32* values, int* count)
 309 {
 310         int low = 0, high = 0, top = 0, temp = 0;
 311         int cur = 0, next = 0;
 312
 313         /* sanity checks */
 314         if( (0 > *count) || (NULL == values) ) {
 315                 return -EINVAL;
 316         }
 317
 318         /* bubble sort the first @count items of the array @values */
 319         for( top = *count; top > 0; top--) {
 320                 for( low = 0, high = 1; high < top; low++, high++) {
 321                         if( values[low] > values[high] ) {
 322                                 temp = values[low];
 323                                 values[low] = values[high];
 324                                 values[high] = temp;
 325                         }
 326                 }
 327         }
 328
 329         /* remove duplicate items */
 330         for( cur = 0, next = 1; next < *count; next++) {
 331                 if( values[cur] != values[next])
 332                         values[++cur] = values[next];
 333         }
 334
 335         *count = cur + 1;
 336
 337         return 0;
 338 }
 339
 340 static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
 341         struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
 342 {
 343         struct saa7146_vv *vv = dev->vv_data;
 344         __le32 *clipping = vv->d_clipping.cpu_addr;
 345
 346         int width = fh->ov.win.w.width;
 347         int height =  fh->ov.win.w.height;
 348         int clipcount = fh->ov.nclips;
 349
 350         u32 line_list[32];
 351         u32 pixel_list[32];
 352         int numdwords = 0;
 353
 354         int i = 0, j = 0;
 355         int cnt_line = 0, cnt_pixel = 0;
 356
 357         int x[32], y[32], w[32], h[32];
 358
 359         /* clear out memory */
 360         memset(&line_list[0],  0x00, sizeof(u32)*32);
 361         memset(&pixel_list[0], 0x00, sizeof(u32)*32);
 362         memset(clipping,  0x00, SAA7146_CLIPPING_MEM);
 363
 364         /* fill the line and pixel-lists */
 365         for(i = 0; i < clipcount; i++) {
 366                 int l = 0, r = 0, t = 0, b = 0;
 367
 368                 x[i] = fh->ov.clips[i].c.left;
 369                 y[i] = fh->ov.clips[i].c.top;
 370                 w[i] = fh->ov.clips[i].c.width;
 371                 h[i] = fh->ov.clips[i].c.height;
 372
 373                 if( w[i] < 0) {
 374                         x[i] += w[i]; w[i] = -w[i];
 375                 }
 376                 if( h[i] < 0) {
 377                         y[i] += h[i]; h[i] = -h[i];
 378                 }
 379                 if( x[i] < 0) {
 380                         w[i] += x[i]; x[i] = 0;
 381                 }
 382                 if( y[i] < 0) {
 383                         h[i] += y[i]; y[i] = 0;
 384                 }
 385                 if( 0 != vv->vflip ) {
 386                         y[i] = height - y[i] - h[i];
 387                 }
 388
 389                 l = x[i];
 390                 r = x[i]+w[i];
 391                 t = y[i];
 392                 b = y[i]+h[i];
 393
 394                 /* insert left/right coordinates */
 395                 pixel_list[ 2*i   ] = min_t(int, l, width);
 396                 pixel_list[(2*i)+1] = min_t(int, r, width);
 397                 /* insert top/bottom coordinates */
 398                 line_list[ 2*i   ] = min_t(int, t, height);
 399                 line_list[(2*i)+1] = min_t(int, b, height);
 400         }
 401
 402         /* sort and eliminate lists */
 403         cnt_line = cnt_pixel = 2*clipcount;
 404         sort_and_eliminate( &pixel_list[0], &cnt_pixel );
 405         sort_and_eliminate( &line_list[0], &cnt_line );
 406
 407         /* calculate the number of used u32s */
 408         numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
 409         numdwords = max_t(int, 4, numdwords);
 410         numdwords = min_t(int, 64, numdwords);
 411
 412         /* fill up cliptable */
 413         for(i = 0; i < cnt_pixel; i++) {
 414                 clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
 415         }
 416         for(i = 0; i < cnt_line; i++) {
 417                 clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
 418         }
 419
 420         /* fill up cliptable with the display infos */
 421         for(j = 0; j < clipcount; j++) {
 422
 423                 for(i = 0; i < cnt_pixel; i++) {
 424
 425                         if( x[j] < 0)
 426                                 x[j] = 0;
 427
 428                         if( pixel_list[i] < (x[j] + w[j])) {
 429
 430                                 if ( pixel_list[i] >= x[j] ) {
 431                                         clipping[2*i] |= cpu_to_le32(1 << j);
 432                                 }
 433                         }
 434                 }
 435                 for(i = 0; i < cnt_line; i++) {
 436
 437                         if( y[j] < 0)
 438                                 y[j] = 0;
 439
 440                         if( line_list[i] < (y[j] + h[j]) ) {
 441
 442                                 if( line_list[i] >= y[j] ) {
 443                                         clipping[(2*i)+1] |= cpu_to_le32(1 << j);
 444                                 }
 445                         }
 446                 }
 447         }
 448
 449         /* adjust arbitration control register */
 450         *arbtr_ctrl &= 0xffff00ff;
 451         *arbtr_ctrl |= 0x00001c00;
 452
 453         vdma2->base_even        = vv->d_clipping.dma_handle;
 454         vdma2->base_odd         = vv->d_clipping.dma_handle;
 455         vdma2->prot_addr        = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
 456         vdma2->base_page        = 0x04;
 457         vdma2->pitch            = 0x00;
 458         vdma2->num_line_byte    = (0 << 16 | (sizeof(u32))*(numdwords-1) );
 459
 460         /* set clipping-mode. this depends on the field(s) used */
 461         *clip_format &= 0xfffffff7;
 462         if (V4L2_FIELD_HAS_BOTH(field)) {
 463                 *clip_format |= 0x00000008;
 464         } else {
 465                 *clip_format |= 0x00000000;
 466         }
 467 }
 468
 469 /* disable clipping */
 470 static void saa7146_disable_clipping(struct saa7146_dev *dev)
 471 {
 472         u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 473
 474         /* mask out relevant bits (=lower word)*/
 475         clip_format &= MASK_W1;
 476
 477         /* upload clipping-registers*/
 478         saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
 479         saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 480
 481         /* disable video dma2 */
 482         saa7146_write(dev, MC1, MASK_21);
 483 }
 484
 485 static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
 486 {
 487         struct saa7146_dev *dev = fh->dev;
 488         enum v4l2_field field = fh->ov.win.field;
 489         struct  saa7146_video_dma vdma2;
 490         u32 clip_format;
 491         u32 arbtr_ctrl;
 492
 493         /* check clipcount, disable clipping if clipcount == 0*/
 494         if( fh->ov.nclips == 0 ) {
 495                 saa7146_disable_clipping(dev);
 496                 return;
 497         }
 498
 499         clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 500         arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
 501
 502         calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
 503
 504         /* set clipping format */
 505         clip_format &= 0xffff0008;
 506         clip_format |= (SAA7146_CLIPPING_RECT << 4);
 507
 508         /* prepare video dma2 */
 509         saa7146_write(dev, BASE_EVEN2,          vdma2.base_even);
 510         saa7146_write(dev, BASE_ODD2,           vdma2.base_odd);
 511         saa7146_write(dev, PROT_ADDR2,          vdma2.prot_addr);
 512         saa7146_write(dev, BASE_PAGE2,          vdma2.base_page);
 513         saa7146_write(dev, PITCH2,              vdma2.pitch);
 514         saa7146_write(dev, NUM_LINE_BYTE2,      vdma2.num_line_byte);
 515
 516         /* prepare the rest */
 517         saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
 518         saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
 519
 520         /* upload clip_control-register, clipping-registers, enable video dma2 */
 521         saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
 522         saa7146_write(dev, MC1, (MASK_05 | MASK_21));
 523 }
 524
 525 static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
 526 {
 527         struct saa7146_vv *vv = dev->vv_data;
 528
 529         int source = vv->current_hps_source;
 530         int sync = vv->current_hps_sync;
 531
 532         u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
 533
 534         /* set vertical scale */
 535         hps_v_scale = 0; /* all bits get set by the function-call */
 536         hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
 537         calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
 538
 539         /* set horizontal scale */
 540         hps_ctrl        = 0;
 541         hps_h_prescale  = 0; /* all bits get set in the function */
 542         hps_h_scale     = 0;
 543         calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
 544
 545         /* set hyo and hxo */
 546         calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
 547         calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
 548
 549         /* write out new register contents */
 550         saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
 551         saa7146_write(dev, HPS_V_GAIN,  hps_v_gain);
 552         saa7146_write(dev, HPS_CTRL,    hps_ctrl);
 553         saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
 554         saa7146_write(dev, HPS_H_SCALE, hps_h_scale);
 555
 556         /* upload shadow-ram registers */
 557         saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
 558 }
 559
 560 /* calculate the new memory offsets for a desired position */
 561 static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
 562 {
 563         struct saa7146_vv *vv = dev->vv_data;
 564         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
 565
 566         int b_depth = vv->ov_fmt->depth;
 567         int b_bpl = vv->ov_fb.fmt.bytesperline;
 568         /* The unsigned long cast is to remove a 64-bit compile warning since
 569            it looks like a 64-bit address is cast to a 32-bit value, even
 570            though the base pointer is really a 32-bit physical address that
 571            goes into a 32-bit DMA register.
 572            FIXME: might not work on some 64-bit platforms, but see the FIXME
 573            in struct v4l2_framebuffer (videodev2.h) for that.
 574          */
 575         u32 base = (u32)(unsigned long)vv->ov_fb.base;
 576
 577         struct  saa7146_video_dma vdma1;
 578
 579         /* calculate memory offsets for picture, look if we shall top-down-flip */
 580         vdma1.pitch     = 2*b_bpl;
 581         if ( 0 == vv->vflip ) {
 582                 vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
 583                 vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
 584                 vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
 585         }
 586         else {
 587                 vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
 588                 vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
 589                 vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
 590         }
 591
 592         if (V4L2_FIELD_HAS_BOTH(field)) {
 593         } else if (field == V4L2_FIELD_ALTERNATE) {
 594                 /* fixme */
 595                 vdma1.base_odd = vdma1.prot_addr;
 596                 vdma1.pitch /= 2;
 597         } else if (field == V4L2_FIELD_TOP) {
 598                 vdma1.base_odd = vdma1.prot_addr;
 599                 vdma1.pitch /= 2;
 600         } else if (field == V4L2_FIELD_BOTTOM) {
 601                 vdma1.base_odd = vdma1.base_even;
 602                 vdma1.base_even = vdma1.prot_addr;
 603                 vdma1.pitch /= 2;
 604         }
 605
 606         if ( 0 != vv->vflip ) {
 607                 vdma1.pitch *= -1;
 608         }
 609
 610         vdma1.base_page = sfmt->swap;
 611         vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
 612
 613         saa7146_write_out_dma(dev, 1, &vdma1);
 614 }
 615
 616 static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
 617 {
 618         u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 619
 620         /* call helper function */
 621         calculate_output_format_register(dev,palette,&clip_format);
 622
 623         /* update the hps registers */
 624         saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
 625         saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 626 }
 627
 628 /* select input-source */
 629 void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
 630 {
 631         struct saa7146_vv *vv = dev->vv_data;
 632         u32 hps_ctrl = 0;
 633
 634         /* read old state */
 635         hps_ctrl = saa7146_read(dev, HPS_CTRL);
 636
 637         hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
 638         hps_ctrl |= (source << 30) | (sync << 28);
 639
 640         /* write back & upload register */
 641         saa7146_write(dev, HPS_CTRL, hps_ctrl);
 642         saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 643
 644         vv->current_hps_source = source;
 645         vv->current_hps_sync = sync;
 646 }
 647 EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
 648
 649 int saa7146_enable_overlay(struct saa7146_fh *fh)
 650 {
 651         struct saa7146_dev *dev = fh->dev;
 652         struct saa7146_vv *vv = dev->vv_data;
 653
 654         saa7146_set_window(dev, fh->ov.win.w.width, fh->ov.win.w.height, fh->ov.win.field);
 655         saa7146_set_position(dev, fh->ov.win.w.left, fh->ov.win.w.top, fh->ov.win.w.height, fh->ov.win.field, vv->ov_fmt->pixelformat);
 656         saa7146_set_output_format(dev, vv->ov_fmt->trans);
 657         saa7146_set_clipping_rect(fh);
 658
 659         /* enable video dma1 */
 660         saa7146_write(dev, MC1, (MASK_06 | MASK_22));
 661         return 0;
 662 }
 663
 664 void saa7146_disable_overlay(struct saa7146_fh *fh)
 665 {
 666         struct saa7146_dev *dev = fh->dev;
 667
 668         /* disable clipping + video dma1 */
 669         saa7146_disable_clipping(dev);
 670         saa7146_write(dev, MC1, MASK_22);
 671 }
 672
 673 void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
 674 {
 675         int where = 0;
 676
 677         if( which < 1 || which > 3) {
 678                 return;
 679         }
 680
 681         /* calculate starting address */
 682         where  = (which-1)*0x18;
 683
 684         saa7146_write(dev, where,       vdma->base_odd);
 685         saa7146_write(dev, where+0x04,  vdma->base_even);
 686         saa7146_write(dev, where+0x08,  vdma->prot_addr);
 687         saa7146_write(dev, where+0x0c,  vdma->pitch);
 688         saa7146_write(dev, where+0x10,  vdma->base_page);
 689         saa7146_write(dev, where+0x14,  vdma->num_line_byte);
 690
 691         /* upload */
 692         saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
 693 /*
 694         printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
 695         printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
 696         printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
 697         printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
 698         printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
 699         printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
 700 */
 701 }
 702
 703 static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
 704 {
 705         struct saa7146_vv *vv = dev->vv_data;
 706         struct saa7146_video_dma vdma1;
 707
 708         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 709
 710         int width = buf->fmt->width;
 711         int height = buf->fmt->height;
 712         int bytesperline = buf->fmt->bytesperline;
 713         enum v4l2_field field = buf->fmt->field;
 714
 715         int depth = sfmt->depth;
 716
 717         DEB_CAP("[size=%dx%d,fields=%s]\n",
 718                 width, height, v4l2_field_names[field]);
 719
 720         if( bytesperline != 0) {
 721                 vdma1.pitch = bytesperline*2;
 722         } else {
 723                 vdma1.pitch = (width*depth*2)/8;
 724         }
 725         vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
 726         vdma1.base_page         = buf->pt[0].dma | ME1 | sfmt->swap;
 727
 728         if( 0 != vv->vflip ) {
 729                 vdma1.prot_addr = buf->pt[0].offset;
 730                 vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
 731                 vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
 732         } else {
 733                 vdma1.base_even = buf->pt[0].offset;
 734                 vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
 735                 vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
 736         }
 737
 738         if (V4L2_FIELD_HAS_BOTH(field)) {
 739         } else if (field == V4L2_FIELD_ALTERNATE) {
 740                 /* fixme */
 741                 if ( vv->last_field == V4L2_FIELD_TOP ) {
 742                         vdma1.base_odd  = vdma1.prot_addr;
 743                         vdma1.pitch /= 2;
 744                 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
 745                         vdma1.base_odd  = vdma1.base_even;
 746                         vdma1.base_even = vdma1.prot_addr;
 747                         vdma1.pitch /= 2;
 748                 }
 749         } else if (field == V4L2_FIELD_TOP) {
 750                 vdma1.base_odd  = vdma1.prot_addr;
 751                 vdma1.pitch /= 2;
 752         } else if (field == V4L2_FIELD_BOTTOM) {
 753                 vdma1.base_odd  = vdma1.base_even;
 754                 vdma1.base_even = vdma1.prot_addr;
 755                 vdma1.pitch /= 2;
 756         }
 757
 758         if( 0 != vv->vflip ) {
 759                 vdma1.pitch *= -1;
 760         }
 761
 762         saa7146_write_out_dma(dev, 1, &vdma1);
 763         return 0;
 764 }
 765
 766 static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
 767 {
 768         int height = buf->fmt->height;
 769         int width = buf->fmt->width;
 770
 771         vdma2->pitch    = width;
 772         vdma3->pitch    = width;
 773
 774         /* fixme: look at bytesperline! */
 775
 776         if( 0 != vv->vflip ) {
 777                 vdma2->prot_addr        = buf->pt[1].offset;
 778                 vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
 779                 vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);
 780
 781                 vdma3->prot_addr        = buf->pt[2].offset;
 782                 vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
 783                 vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
 784         } else {
 785                 vdma3->base_even        = buf->pt[2].offset;
 786                 vdma3->base_odd         = vdma3->base_even + (vdma3->pitch/2);
 787                 vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;
 788
 789                 vdma2->base_even        = buf->pt[1].offset;
 790                 vdma2->base_odd         = vdma2->base_even + (vdma2->pitch/2);
 791                 vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
 792         }
 793
 794         return 0;
 795 }
 796
 797 static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
 798 {
 799         int height = buf->fmt->height;
 800         int width = buf->fmt->width;
 801
 802         vdma2->pitch    = width/2;
 803         vdma3->pitch    = width/2;
 804
 805         if( 0 != vv->vflip ) {
 806                 vdma2->prot_addr        = buf->pt[2].offset;
 807                 vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
 808                 vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);
 809
 810                 vdma3->prot_addr        = buf->pt[1].offset;
 811                 vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
 812                 vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
 813
 814         } else {
 815                 vdma3->base_even        = buf->pt[2].offset;
 816                 vdma3->base_odd         = vdma3->base_even + (vdma3->pitch);
 817                 vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;
 818
 819                 vdma2->base_even        = buf->pt[1].offset;
 820                 vdma2->base_odd         = vdma2->base_even + (vdma2->pitch);
 821                 vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
 822         }
 823         return 0;
 824 }
 825
 826 static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
 827 {
 828         struct saa7146_vv *vv = dev->vv_data;
 829         struct saa7146_video_dma vdma1;
 830         struct saa7146_video_dma vdma2;
 831         struct saa7146_video_dma vdma3;
 832
 833         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 834
 835         int width = buf->fmt->width;
 836         int height = buf->fmt->height;
 837         enum v4l2_field field = buf->fmt->field;
 838
 839         BUG_ON(0 == buf->pt[0].dma);
 840         BUG_ON(0 == buf->pt[1].dma);
 841         BUG_ON(0 == buf->pt[2].dma);
 842
 843         DEB_CAP("[size=%dx%d,fields=%s]\n",
 844                 width, height, v4l2_field_names[field]);
 845
 846         /* fixme: look at bytesperline! */
 847
 848         /* fixme: what happens for user space buffers here?. The offsets are
 849            most likely wrong, this version here only works for page-aligned
 850            buffers, modifications to the pagetable-functions are necessary...*/
 851
 852         vdma1.pitch             = width*2;
 853         vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
 854         vdma1.base_page         = buf->pt[0].dma | ME1;
 855
 856         if( 0 != vv->vflip ) {
 857                 vdma1.prot_addr = buf->pt[0].offset;
 858                 vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
 859                 vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
 860         } else {
 861                 vdma1.base_even = buf->pt[0].offset;
 862                 vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
 863                 vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
 864         }
 865
 866         vdma2.num_line_byte     = 0; /* unused */
 867         vdma2.base_page         = buf->pt[1].dma | ME1;
 868
 869         vdma3.num_line_byte     = 0; /* unused */
 870         vdma3.base_page         = buf->pt[2].dma | ME1;
 871
 872         switch( sfmt->depth ) {
 873                 case 12: {
 874                         calc_planar_420(vv,buf,&vdma2,&vdma3);
 875                         break;
 876                 }
 877                 case 16: {
 878                         calc_planar_422(vv,buf,&vdma2,&vdma3);
 879                         break;
 880                 }
 881                 default: {
 882                         return -1;
 883                 }
 884         }
 885
 886         if (V4L2_FIELD_HAS_BOTH(field)) {
 887         } else if (field == V4L2_FIELD_ALTERNATE) {
 888                 /* fixme */
 889                 vdma1.base_odd  = vdma1.prot_addr;
 890                 vdma1.pitch /= 2;
 891                 vdma2.base_odd  = vdma2.prot_addr;
 892                 vdma2.pitch /= 2;
 893                 vdma3.base_odd  = vdma3.prot_addr;
 894                 vdma3.pitch /= 2;
 895         } else if (field == V4L2_FIELD_TOP) {
 896                 vdma1.base_odd  = vdma1.prot_addr;
 897                 vdma1.pitch /= 2;
 898                 vdma2.base_odd  = vdma2.prot_addr;
 899                 vdma2.pitch /= 2;
 900                 vdma3.base_odd  = vdma3.prot_addr;
 901                 vdma3.pitch /= 2;
 902         } else if (field == V4L2_FIELD_BOTTOM) {
 903                 vdma1.base_odd  = vdma1.base_even;
 904                 vdma1.base_even = vdma1.prot_addr;
 905                 vdma1.pitch /= 2;
 906                 vdma2.base_odd  = vdma2.base_even;
 907                 vdma2.base_even = vdma2.prot_addr;
 908                 vdma2.pitch /= 2;
 909                 vdma3.base_odd  = vdma3.base_even;
 910                 vdma3.base_even = vdma3.prot_addr;
 911                 vdma3.pitch /= 2;
 912         }
 913
 914         if( 0 != vv->vflip ) {
 915                 vdma1.pitch *= -1;
 916                 vdma2.pitch *= -1;
 917                 vdma3.pitch *= -1;
 918         }
 919
 920         saa7146_write_out_dma(dev, 1, &vdma1);
 921         if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
 922                 saa7146_write_out_dma(dev, 3, &vdma2);
 923                 saa7146_write_out_dma(dev, 2, &vdma3);
 924         } else {
 925                 saa7146_write_out_dma(dev, 2, &vdma2);
 926                 saa7146_write_out_dma(dev, 3, &vdma3);
 927         }
 928         return 0;
 929 }
 930
 931 static void program_capture_engine(struct saa7146_dev *dev, int planar)
 932 {
 933         struct saa7146_vv *vv = dev->vv_data;
 934         int count = 0;
 935
 936         unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
 937         unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
 938
 939         /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
 940         WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
 941         WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
 942
 943         /* set rps register 0 */
 944         WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
 945         WRITE_RPS0(MASK_27 | MASK_11);
 946
 947         /* turn on video-dma1 */
 948         WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 949         WRITE_RPS0(MASK_06 | MASK_22);                  /* => mask */
 950         WRITE_RPS0(MASK_06 | MASK_22);                  /* => values */
 951         if( 0 != planar ) {
 952                 /* turn on video-dma2 */
 953                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 954                 WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
 955                 WRITE_RPS0(MASK_05 | MASK_21);                  /* => values */
 956
 957                 /* turn on video-dma3 */
 958                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 959                 WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
 960                 WRITE_RPS0(MASK_04 | MASK_20);                  /* => values */
 961         }
 962
 963         /* wait for o_fid_a/b / e_fid_a/b toggle */
 964         if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
 965                 WRITE_RPS0(CMD_PAUSE | o_wait);
 966                 WRITE_RPS0(CMD_PAUSE | e_wait);
 967         } else if ( vv->last_field == V4L2_FIELD_TOP ) {
 968                 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
 969                 WRITE_RPS0(CMD_PAUSE | o_wait);
 970         } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
 971                 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
 972                 WRITE_RPS0(CMD_PAUSE | e_wait);
 973         }
 974
 975         /* turn off video-dma1 */
 976         WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 977         WRITE_RPS0(MASK_22 | MASK_06);                  /* => mask */
 978         WRITE_RPS0(MASK_22);                            /* => values */
 979         if( 0 != planar ) {
 980                 /* turn off video-dma2 */
 981                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 982                 WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
 983                 WRITE_RPS0(MASK_21);                            /* => values */
 984
 985                 /* turn off video-dma3 */
 986                 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 987                 WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
 988                 WRITE_RPS0(MASK_20);                            /* => values */
 989         }
 990
 991         /* generate interrupt */
 992         WRITE_RPS0(CMD_INTERRUPT);
 993
 994         /* stop */
 995         WRITE_RPS0(CMD_STOP);
 996 }
 997
 998 void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
 999 {
1000         struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
1001         struct saa7146_vv *vv = dev->vv_data;
1002         u32 vdma1_prot_addr;
1003
1004         DEB_CAP("buf:%p, next:%p\n", buf, next);
1005
1006         vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
1007         if( 0 == vdma1_prot_addr ) {
1008                 /* clear out beginning of streaming bit (rps register 0)*/
1009                 DEB_CAP("forcing sync to new frame\n");
1010                 saa7146_write(dev, MC2, MASK_27 );
1011         }
1012
1013         saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
1014         saa7146_set_output_format(dev, sfmt->trans);
1015         saa7146_disable_clipping(dev);
1016
1017         if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
1018         } else if ( vv->last_field == V4L2_FIELD_TOP ) {
1019                 vv->last_field = V4L2_FIELD_BOTTOM;
1020         } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
1021                 vv->last_field = V4L2_FIELD_TOP;
1022         }
1023
1024         if( 0 != IS_PLANAR(sfmt->trans)) {
1025                 calculate_video_dma_grab_planar(dev, buf);
1026                 program_capture_engine(dev,1);
1027         } else {
1028                 calculate_video_dma_grab_packed(dev, buf);
1029                 program_capture_engine(dev,0);
1030         }
1031
1032 /*
1033         printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
1034         printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
1035         printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
1036         printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
1037         printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
1038         printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
1039         printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
1040 */
1041
1042         /* write the address of the rps-program */
1043         saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
1044
1045         /* turn on rps */
1046         saa7146_write(dev, MC1, (MASK_12 | MASK_28));
1047 }