pandora-kernel.git
12 months agopandora: defconfig: update master pandora-3.2
Grazvydas Ignotas [Sat, 20 Jul 2019 23:15:26 +0000 (02:15 +0300)]
pandora: defconfig: update

12 months agoBluetooth: Verify that l2cap_get_conf_opt provides large enough buffer
Marcel Holtmann [Fri, 18 Jan 2019 12:43:19 +0000 (13:43 +0100)]
Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer

commit 7c9cbd0b5e38a1672fcd137894ace3b042dfbf69 upstream.

The function l2cap_get_conf_opt will return L2CAP_CONF_OPT_SIZE + opt->len
as length value. The opt->len however is in control over the remote user
and can be used by an attacker to gain access beyond the bounds of the
actual packet.

To prevent any potential leak of heap memory, it is enough to check that
the resulting len calculation after calling l2cap_get_conf_opt is not
below zero. A well formed packet will always return >= 0 here and will
end with the length value being zero after the last option has been
parsed. In case of malformed packets messing with the opt->len field the
length value will become negative. If that is the case, then just abort
and ignore the option.

In case an attacker uses a too short opt->len value, then garbage will
be parsed, but that is protected by the unknown option handling and also
the option parameter size checks.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
12 months agoBluetooth: hidp: fix buffer overflow
Young Xiao [Fri, 12 Apr 2019 07:24:30 +0000 (15:24 +0800)]
Bluetooth: hidp: fix buffer overflow

commit a1616a5ac99ede5d605047a9012481ce7ff18b16 upstream.

Struct ca is copied from userspace. It is not checked whether the "name"
field is NULL terminated, which allows local users to obtain potentially
sensitive information from kernel stack memory, via a HIDPCONNADD command.

This vulnerability is similar to CVE-2011-1079.

Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
12 months agotcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
Eric Dumazet [Sat, 8 Jun 2019 17:22:49 +0000 (10:22 -0700)]
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()

commit 967c05aee439e6e5d7d805e195b3a20ef5c433d6 upstream.

If mtu probing is enabled tcp_mtu_probing() could very well end up
with a too small MSS.

Use the new sysctl tcp_min_snd_mss to make sure MSS search
is performed in an acceptable range.

CVE-2019-11479 -- tcp mss hardcoded to 48

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Salvatore Bonaccorso: Backport for context changes in 4.9.168]
[bwh: Backported to 3.16: The sysctl is global]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
12 months agotcp: add tcp_min_snd_mss sysctl
Eric Dumazet [Thu, 6 Jun 2019 16:15:31 +0000 (09:15 -0700)]
tcp: add tcp_min_snd_mss sysctl

commit 5f3e2bf008c2221478101ee72f5cb4654b9fc363 upstream.

Some TCP peers announce a very small MSS option in their SYN and/or
SYN/ACK messages.

This forces the stack to send packets with a very high network/cpu
overhead.

Linux has enforced a minimal value of 48. Since this value includes
the size of TCP options, and that the options can consume up to 40
bytes, this means that each segment can include only 8 bytes of payload.

In some cases, it can be useful to increase the minimal value
to a saner value.

We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility
reasons.

Note that TCP_MAXSEG socket option enforces a minimal value
of (TCP_MIN_MSS). David Miller increased this minimal value
in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.")
from 64 to 88.

We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS.

CVE-2019-11479 -- tcp mss hardcoded to 48

Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Salvatore Bonaccorso: Backport for context changes in 4.9.168]
[bwh: Backported to 3.16: Make the sysctl global, consistent with
 net.ipv4.tcp_base_mss]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
12 months agotcp: limit payload size of sacked skbs
Eric Dumazet [Sat, 18 May 2019 00:17:22 +0000 (17:17 -0700)]
tcp: limit payload size of sacked skbs

commit 3b4929f65b0d8249f19a50245cd88ed1a2f78cff upstream.

Jonathan Looney reported that TCP can trigger the following crash
in tcp_shifted_skb() :

BUG_ON(tcp_skb_pcount(skb) < pcount);

This can happen if the remote peer has advertized the smallest
MSS that linux TCP accepts : 48

An skb can hold 17 fragments, and each fragment can hold 32KB
on x86, or 64KB on PowerPC.

This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs
can overflow.

Note that tcp_sendmsg() builds skbs with less than 64KB
of payload, so this problem needs SACK to be enabled.
SACK blocks allow TCP to coalesce multiple skbs in the retransmit
queue, thus filling the 17 fragments to maximal capacity.

CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs

Backport notes, provided by Joao Martins <joao.m.martins@oracle.com>

v4.15 or since commit 737ff314563 ("tcp: use sequence distance to
detect reordering") had switched from the packet-based FACK tracking and
switched to sequence-based.

v4.14 and older still have the old logic and hence on
tcp_skb_shift_data() needs to retain its original logic and have
@fack_count in sync. In other words, we keep the increment of pcount with
tcp_skb_pcount(skb) to later used that to update fack_count. To make it
more explicit we track the new skb that gets incremented to pcount in
@next_pcount, and we get to avoid the constant invocation of
tcp_skb_pcount(skb) all together.

Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Bruce Curtis <brucec@netflix.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Salvatore Bonaccorso: Adjust for context changes to backport to
4.9.168]
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agopandora: defconfig: update
Grazvydas Ignotas [Sun, 24 Jun 2018 16:06:01 +0000 (19:06 +0300)]
pandora: defconfig: update

seemed to have these locally for a while and forgot to push

2 years agoMerge branch 'stable-3.2' into pandora-3.2
Grazvydas Ignotas [Sun, 24 Jun 2018 15:26:36 +0000 (18:26 +0300)]
Merge branch 'stable-3.2' into pandora-3.2

2 years agoLinux 3.2.102
Ben Hutchings [Thu, 31 May 2018 23:30:27 +0000 (00:30 +0100)]
Linux 3.2.102

2 years agomtd: jedec_probe: Fix crash in jedec_read_mfr()
Linus Walleij [Sat, 3 Mar 2018 22:29:03 +0000 (23:29 +0100)]
mtd: jedec_probe: Fix crash in jedec_read_mfr()

commit 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 upstream.

It turns out that the loop where we read manufacturer
jedec_read_mfd() can under some circumstances get a
CFI_MFR_CONTINUATION repeatedly, making the loop go
over all banks and eventually hit the end of the
map and crash because of an access violation:

Unable to handle kernel paging request at virtual address c4980000
pgd = (ptrval)
[c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] PREEMPT ARM
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150
Hardware name: Gemini (Device Tree)
PC is at jedec_probe_chip+0x6ec/0xcd0
LR is at 0x4
pc : [<c03a2bf4>]    lr : [<00000004>]    psr: 60000013
sp : c382dd18  ip : 0000ffff  fp : 00000000
r10: c0626388  r9 : 00020000  r8 : c0626340
r7 : 00000000  r6 : 00000001  r5 : c3a71afc  r4 : c382dd70
r3 : 00000001  r2 : c4900000  r1 : 00000002  r0 : 00080000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 0000397f  Table: 00004000  DAC: 00000053
Process swapper (pid: 1, stack limit = 0x(ptrval))

Fix this by breaking the loop with a return 0 if
the offset exceeds the map size.

Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Check that device exists prior to accessing it
Leon Romanovsky [Sun, 25 Mar 2018 08:39:05 +0000 (11:39 +0300)]
RDMA/ucma: Check that device exists prior to accessing it

commit c8d3bcbfc5eab3f01cf373d039af725f3b488813 upstream.

Ensure that device exists prior to accessing its properties.

Reported-by: <syzbot+71655d44855ac3e76366@syzkaller.appspotmail.com>
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Check that device is connected prior to access it
Leon Romanovsky [Sun, 25 Mar 2018 08:23:55 +0000 (11:23 +0300)]
RDMA/ucma: Check that device is connected prior to access it

commit 4b658d1bbc16605330694bb3ef2570c465ef383d upstream.

Add missing check that device is connected prior to access it.

[   55.358652] BUG: KASAN: null-ptr-deref in rdma_init_qp_attr+0x4a/0x2c0
[   55.359389] Read of size 8 at addr 00000000000000b0 by task qp/618
[   55.360255]
[   55.360432] CPU: 1 PID: 618 Comm: qp Not tainted 4.16.0-rc1-00071-gcaf61b1b8b88 #91
[   55.361693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[   55.363264] Call Trace:
[   55.363833]  dump_stack+0x5c/0x77
[   55.364215]  kasan_report+0x163/0x380
[   55.364610]  ? rdma_init_qp_attr+0x4a/0x2c0
[   55.365238]  rdma_init_qp_attr+0x4a/0x2c0
[   55.366410]  ucma_init_qp_attr+0x111/0x200
[   55.366846]  ? ucma_notify+0xf0/0xf0
[   55.367405]  ? _get_random_bytes+0xea/0x1b0
[   55.367846]  ? urandom_read+0x2f0/0x2f0
[   55.368436]  ? kmem_cache_alloc_trace+0xd2/0x1e0
[   55.369104]  ? refcount_inc_not_zero+0x9/0x60
[   55.369583]  ? refcount_inc+0x5/0x30
[   55.370155]  ? rdma_create_id+0x215/0x240
[   55.370937]  ? _copy_to_user+0x4f/0x60
[   55.371620]  ? mem_cgroup_commit_charge+0x1f5/0x290
[   55.372127]  ? _copy_from_user+0x5e/0x90
[   55.372720]  ucma_write+0x174/0x1f0
[   55.373090]  ? ucma_close_id+0x40/0x40
[   55.373805]  ? __lru_cache_add+0xa8/0xd0
[   55.374403]  __vfs_write+0xc4/0x350
[   55.374774]  ? kernel_read+0xa0/0xa0
[   55.375173]  ? fsnotify+0x899/0x8f0
[   55.375544]  ? fsnotify_unmount_inodes+0x170/0x170
[   55.376689]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   55.377522]  ? handle_mm_fault+0x174/0x320
[   55.378169]  vfs_write+0xf7/0x280
[   55.378864]  SyS_write+0xa1/0x120
[   55.379270]  ? SyS_read+0x120/0x120
[   55.379643]  ? mm_fault_error+0x180/0x180
[   55.380071]  ? task_work_run+0x7d/0xd0
[   55.380910]  ? __task_pid_nr_ns+0x120/0x140
[   55.381366]  ? SyS_read+0x120/0x120
[   55.381739]  do_syscall_64+0xeb/0x250
[   55.382143]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   55.382841] RIP: 0033:0x7fc2ef803e99
[   55.383227] RSP: 002b:00007fffcc5f3be8 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
[   55.384173] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc2ef803e99
[   55.386145] RDX: 0000000000000057 RSI: 0000000020000080 RDI: 0000000000000003
[   55.388418] RBP: 00007fffcc5f3c00 R08: 0000000000000000 R09: 0000000000000000
[   55.390542] R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000400480
[   55.392916] R13: 00007fffcc5f3cf0 R14: 0000000000000000 R15: 0000000000000000
[   55.521088] Code: e5 4d 1e ff 48 89 df 44 0f b6 b3 b8 01 00 00 e8 65 50 1e ff 4c 8b 2b 49
8d bd b0 00 00 00 e8 56 50 1e ff 41 0f b6 c6 48 c1 e0 04 <49> 03 85 b0 00 00 00 48 8d 78 08
48 89 04 24 e8 3a 4f 1e ff 48
[   55.525980] RIP: rdma_init_qp_attr+0x52/0x2c0 RSP: ffff8801e2c2f9d8
[   55.532648] CR2: 00000000000000b0
[   55.534396] ---[ end trace 70cee64090251c0b ]---

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Fixes: d541e45500bd ("IB/core: Convert ah_attr from OPA to IB when copying to user")
Reported-by: <syzbot+7b62c837c2516f8f38c8@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonet/mlx4_en: Fix mixed PFC and Global pause user control requests
Eran Ben Elisha [Tue, 27 Mar 2018 11:41:18 +0000 (14:41 +0300)]
net/mlx4_en: Fix mixed PFC and Global pause user control requests

commit 6e8814ceb7e8f468659ef9253bd212c07ae19584 upstream.

Global pause and PFC configuration should be mutually exclusive (i.e. only
one of them at most can be set). However, once PFC was turned off,
driver automatically turned Global pause on. This is a bug.

Fix the driver behaviour to turn off PFC/Global once the user turned the
other on.

This also fixed a weird behaviour that at a current time, the profile
had both PFC and global pause configuration turned on, which is
Hardware-wise impossible and caused returning false positive indication
to query tools.

In addition, fix error code when setting global pause or PFC to change
metadata only upon successful change.

Also, removed useless debug print.

Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2:
 - Drop changes in en_dcb_nl.c
 - Don't call mlx4_en_update_pfc_stats_bitmap()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonet/mlx4_en: do not ignore autoneg in mlx4_en_set_pauseparam()
Ivan Vecera [Mon, 8 Sep 2014 16:46:53 +0000 (18:46 +0200)]
net/mlx4_en: do not ignore autoneg in mlx4_en_set_pauseparam()

commit 278d436a476f69fc95d5c82bf61b6c2d02f4d44e upstream.

The driver does not support pause autonegotiation so it should return
-EINVAL when the function is called with non-zero autoneg.

Cc: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: pcm: potential uninitialized return values
Dan Carpenter [Tue, 27 Mar 2018 13:07:52 +0000 (16:07 +0300)]
ALSA: pcm: potential uninitialized return values

commit 5607dddbfca774fb38bffadcb077fe03aa4ac5c6 upstream.

Smatch complains that "tmp" can be uninitialized if we do a zero size
write.

Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agobonding: process the err returned by dev_set_allmulti properly in bond_enslave
Xin Long [Sun, 25 Mar 2018 17:16:47 +0000 (01:16 +0800)]
bonding: process the err returned by dev_set_allmulti properly in bond_enslave

commit 9f5a90c107741b864398f4ac0014711a8c1d8474 upstream.

When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.

Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
Stefan Roese [Mon, 26 Mar 2018 14:10:21 +0000 (16:10 +0200)]
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()

commit 9066ae7ff5d89c0b5daa271e2d573540097a94fa upstream.

When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer
will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB
area, as the page offset is outside of the VMA range (size), which is
currently used as size parameter in snd_pcm_lib_default_mmap(). By
using the DMA buffer size (dma_bytes) instead, the complete DMA buffer
can be mmapp'ed and the issue is fixed.

This issue was detected on an ARM platform (TI AM57xx) using the RME
HDSP MADI PCIe soundcard.

Fixes: 657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available")
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetlink: make sure nladdr has correct size in netlink_connect()
Alexander Potapenko [Fri, 23 Mar 2018 12:49:02 +0000 (13:49 +0100)]
netlink: make sure nladdr has correct size in netlink_connect()

commit 7880287981b60a6808f39f297bb66936e8bdf57a upstream.

KMSAN reports use of uninitialized memory in the case when |alen| is
smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't
fully copied from the userspace.

Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agotty: vt: fix up tabstops properly
Linus Torvalds [Sat, 24 Mar 2018 09:43:26 +0000 (10:43 +0100)]
tty: vt: fix up tabstops properly

commit f1869a890cdedb92a3fab969db5d0fd982850273 upstream.

Tabs on a console with long lines do not wrap properly, so correctly
account for the line length when computing the tab placement location.

Reported-by: James Holderness <j4_james@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agotracing: probeevent: Fix to support minus offset from symbol
Masami Hiramatsu [Sat, 17 Mar 2018 12:38:10 +0000 (21:38 +0900)]
tracing: probeevent: Fix to support minus offset from symbol

commit c5d343b6b7badd1f5fe0873eff2e8d63a193e732 upstream.

In Documentation/trace/kprobetrace.txt, it says

 @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)

However, the parser doesn't parse minus offset correctly, since
commit 2fba0c8867af ("tracing/kprobes: Fix probe offset to be
unsigned") drops minus ("-") offset support for kprobe probe
address usage.

This fixes the traceprobe_split_symbol_offset() to parse minus
offset again with checking the offset range, and add a minus
offset check in kprobe probe address usage.

Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Fixes: 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agomm/mempolicy.c: avoid use uninitialized preferred_node
Yisheng Xie [Thu, 22 Mar 2018 23:17:02 +0000 (16:17 -0700)]
mm/mempolicy.c: avoid use uninitialized preferred_node

commit 8970a63e965b43288c4f5f40efbc2bbf80de7f16 upstream.

Alexander reported a use of uninitialized memory in __mpol_equal(),
which is caused by incorrect use of preferred_node.

When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses
numa_node_id() instead of preferred_node, however, __mpol_equal() uses
preferred_node without checking whether it is MPOL_F_LOCAL or not.

[akpm@linux-foundation.org: slight comment tweak]
Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com
Fixes: fc36b8d3d819 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy")
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agos390/qeth: free netdevice when removing a card
Julian Wiedmann [Tue, 20 Mar 2018 06:59:12 +0000 (07:59 +0100)]
s390/qeth: free netdevice when removing a card

commit 6be687395b3124f002a653c1a50b3260222b3cd7 upstream.

On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:

qeth_core_remove_device(card)
lx_remove_device(card)
unregister_netdev(card->dev)
card->dev = NULL !!!
qeth_core_free_card(card)
if (card->dev) !!!
free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoposix-timers: Protect posix clock array access against speculation
Thomas Gleixner [Thu, 15 Feb 2018 16:21:55 +0000 (17:21 +0100)]
posix-timers: Protect posix clock array access against speculation

commit 19b558db12f9f4e45a22012bae7b4783e62224da upstream.

The clockid argument of clockid_to_kclock() comes straight from user space
via various syscalls and is used as index into the posix_clocks array.

Protect it against spectre v1 array out of bounds speculation. Remove the
redundant check for !posix_clock[id] as this is another source for
speculation and does not provide any advantage over the return
posix_clock[id] path which returns NULL in that case anyway.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de
[bwh: Backported to 3.2:
 - Move the test of the clock_getres field below the lookup using
   array_index_nospec()
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: aloop: Fix access to not-yet-ready substream via cable
Takashi Iwai [Thu, 22 Mar 2018 09:40:27 +0000 (10:40 +0100)]
ALSA: aloop: Fix access to not-yet-ready substream via cable

commit 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e upstream.

In loopback_open() and loopback_close(), we assign and release the
substream object to the corresponding cable in a racy way.  It's
neither locked nor done in the right position.  The open callback
assigns the substream before its preparation finishes, hence the other
side of the cable may pick it up, which may lead to the invalid memory
access.

This patch addresses these: move the assignment to the end of the open
callback, and wrap with cable->lock for avoiding concurrent accesses.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: aloop: Sync stale timer before release
Takashi Iwai [Thu, 22 Mar 2018 07:56:06 +0000 (08:56 +0100)]
ALSA: aloop: Sync stale timer before release

commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream.

The aloop driver tries to stop the pending timer via timer_del() in
the trigger callback and in the close callback.  The former is
correct, as it's an atomic operation, while the latter expects that
the timer gets really removed and proceeds the resource releases after
that.  But timer_del() doesn't synchronize, hence the running timer
may still access the released resources.

A similar situation can be also seen in the prepare callback after
trigger(STOP) where the prepare tries to re-initialize the things
while a timer is still running.

The problems like the above are seen indirectly in some syzkaller
reports (although it's not 100% clear whether this is the only cause,
as the race condition is quite narrow and not always easy to
trigger).

For addressing these issues, this patch adds the explicit alls of
timer_del_sync() in some places, so that the pending timer is properly
killed / synced.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Correct option size check using optlen
Chien Tin Tung [Wed, 21 Mar 2018 18:09:25 +0000 (13:09 -0500)]
RDMA/ucma: Correct option size check using optlen

commit 5f3e3b85cc0a5eae1c46d72e47d3de7bf208d9e2 upstream.

The option size check is using optval instead of optlen
causing the set option call to fail. Use the correct
field, optlen, for size check.

Fixes: 6a21dfc0d0db ("RDMA/ucma: Limit possible option size")
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Ensure that CM_ID exists prior to access it
Leon Romanovsky [Tue, 20 Mar 2018 15:05:13 +0000 (17:05 +0200)]
RDMA/ucma: Ensure that CM_ID exists prior to access it

commit e8980d67d6017c8eee8f9c35f782c4bd68e004c9 upstream.

Prior to access UCMA commands, the context should be initialized
and connected to CM_ID with ucma_create_id(). In case user skips
this step, he can provide non-valid ctx without CM_ID and cause
to multiple NULL dereferences.

Also there are situations where the create_id can be raced with
other user access, ensure that the context is only shared to
other threads once it is fully initialized to avoid the races.

[  109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[  109.090315] IP: ucma_connect+0x138/0x1d0
[  109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0
[  109.095384] Oops: 0000 [#1] SMP KASAN PTI
[  109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G    B 4.16.0-rc1-00062-g2975d5de6428 #45
[  109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[  109.105943] RIP: 0010:ucma_connect+0x138/0x1d0
[  109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246
[  109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2
[  109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297
[  109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb
[  109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000
[  109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118
[  109.126221] FS:  00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000
[  109.129468] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0
[  109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  109.142057] Call Trace:
[  109.144160]  ? ucma_listen+0x110/0x110
[  109.146386]  ? wake_up_q+0x59/0x90
[  109.148853]  ? futex_wake+0x10b/0x2a0
[  109.151297]  ? save_stack+0x89/0xb0
[  109.153489]  ? _copy_from_user+0x5e/0x90
[  109.155500]  ucma_write+0x174/0x1f0
[  109.157933]  ? ucma_resolve_route+0xf0/0xf0
[  109.160389]  ? __mod_node_page_state+0x1d/0x80
[  109.162706]  __vfs_write+0xc4/0x350
[  109.164911]  ? kernel_read+0xa0/0xa0
[  109.167121]  ? path_openat+0x1b10/0x1b10
[  109.169355]  ? fsnotify+0x899/0x8f0
[  109.171567]  ? fsnotify_unmount_inodes+0x170/0x170
[  109.174145]  ? __fget+0xa8/0xf0
[  109.177110]  vfs_write+0xf7/0x280
[  109.179532]  SyS_write+0xa1/0x120
[  109.181885]  ? SyS_read+0x120/0x120
[  109.184482]  ? compat_start_thread+0x60/0x60
[  109.187124]  ? SyS_read+0x120/0x120
[  109.189548]  do_syscall_64+0xeb/0x250
[  109.192178]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[  109.194725] RIP: 0033:0x7fabb61ebe99
[  109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99
[  109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004
[  109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000
[  109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0
[  109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0
[  109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f
b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff
31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7
[  109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80
[  109.226256] CR2: 0000000000000020

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[bwh: Backported to 3.2: adjust contex]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Fix use-after-free access in ucma_close
Leon Romanovsky [Mon, 19 Mar 2018 12:20:15 +0000 (14:20 +0200)]
RDMA/ucma: Fix use-after-free access in ucma_close

commit ed65a4dc22083e73bac599ded6a262318cad7baf upstream.

The error in ucma_create_id() left ctx in the list of contexts belong
to ucma file descriptor. The attempt to close this file descriptor causes
to use-after-free accesses while iterating over such list.

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
Kirill Marinushkin [Mon, 19 Mar 2018 06:11:08 +0000 (07:11 +0100)]
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit

commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream.

Currently, the offsets in the UAC2 processing unit descriptor are
calculated incorrectly. It causes an issue when connecting the device which
provides such a feature:

~~~~
[84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18)
~~~~

After this patch is applied, the UAC2 processing unit inits w/o this error.

Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agolibata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
Hans de Goede [Mon, 19 Mar 2018 15:33:59 +0000 (16:33 +0100)]
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

commit 3bf7b5d6d017c27e0d3b160aafb35a8e7cfeda1f upstream.

Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB
drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs
but limited this to the MU02 firmware version, according to:
http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions
and if the MU02 version has broken LPM then the MU01 almost certainly
also has broken LPM, so this commit changes the quirk to apply to all
firmware versions.

Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agolibata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
Hans de Goede [Mon, 19 Mar 2018 15:33:58 +0000 (16:33 +0100)]
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

commit 62ac3f7305470e3f52f159de448bc1a771717e88 upstream.

There have been reports of the Crucial M500 480GB model not working
with LPM set to min_power / med_power_with_dipm level.

It has not been tested with medium_power, but that typically has no
measurable power-savings.

Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03
and there is a MU05 update available, but that update does not mention any
LPM fixes in its changelog, so the quirk matches all firmware versions.

In my experience the LPM problems with (older) Crucial SSDs seem to be
limited to higher capacity versions of the SSDs (different firmware?),
so this commit adds a NOLPM quirk for the 480 and 960GB versions of the
M500, to avoid LPM causing issues with these SSDs.

Reported-and-tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[bwh: Backported to 3.2: Drop the TRIM quirk flags, which aren't supported]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoskbuff: Fix not waking applications when errors are enqueued
Vinicius Costa Gomes [Wed, 14 Mar 2018 20:32:09 +0000 (13:32 -0700)]
skbuff: Fix not waking applications when errors are enqueued

commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 upstream.

When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.

Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt <randy.e.witt@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: sk_data_ready() operation takes a length parameter.
 Delete the local variable we used for that.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agofs: Teach path_connected to handle nfs filesystems with multiple roots.
Eric W. Biederman [Wed, 14 Mar 2018 23:20:29 +0000 (18:20 -0500)]
fs: Teach path_connected to handle nfs filesystems with multiple roots.

commit 95dd77580ccd66a0da96e6d4696945b8cea39431 upstream.

On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem.  The subsets can be from
disjoint directory trees.  The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.

The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem.  The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.

This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.

When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.

The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount.  This move can happen either locally or
remotely.  With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.

If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check.  As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.

The is_subdir function might be cheap enough that we can call it
unconditionally.  Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to.  So I am avoiding that for now.

Filesystems with snapshots such as nilfs and btrfs do something
similar.  But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425dc26d ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2:
 - Add the super_block::s_iflags field
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agodrm/radeon: Don't turn off DP sink when disconnected
Michel Dänzer [Wed, 14 Mar 2018 17:14:04 +0000 (18:14 +0100)]
drm/radeon: Don't turn off DP sink when disconnected

commit 2681bc79eeb640562c932007bfebbbdc55bf6a7d upstream.

Turning off the sink in this case causes various issues, because
userspace expects it to stay on until it turns it off explicitly.

Instead, turn the sink off and back on when a display is connected
again. This dance seems necessary for link training to work correctly.

Bugzilla: https://bugs.freedesktop.org/105308
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agommc: block: fix updating ext_csd caches on ioctl call
Bastian Stender [Thu, 8 Mar 2018 14:08:11 +0000 (15:08 +0100)]
mmc: block: fix updating ext_csd caches on ioctl call

commit e74ef2194b41ba5e511fab29fe5ff00e72d2f42a upstream.

PARTITION_CONFIG is cached in mmc_card->ext_csd.part_config and the
currently active partition in mmc_blk_data->part_curr. These caches do
not always reflect changes if the ioctl call modifies the
PARTITION_CONFIG registers, e.g. by changing BOOT_PARTITION_ENABLE.

Write the PARTITION_CONFIG value extracted from the ioctl call to the
cache and update the currently active partition accordingly. This
ensures that the user space cannot change the values behind the
kernel's back. The next call to mmc_blk_part_switch() will operate on
the data set by the ioctl and reflect the changes appropriately.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[bwh: Backported to 3.2:
 - Also add the definition of MMC_EXTRACT_INDEX_FROM_ARG()
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Fix access to non-initialized CM_ID object
Leon Romanovsky [Tue, 13 Mar 2018 09:43:23 +0000 (11:43 +0200)]
RDMA/ucma: Fix access to non-initialized CM_ID object

commit 7688f2c3bbf55e52388e37ac5d63ca471a7712e1 upstream.

The attempt to join multicast group without ensuring that CMA device
exists will lead to the following crash reported by syzkaller.

[   64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0
[   64.076797] Read of size 8 at addr 00000000000000b0 by task join/691
[   64.076797]
[   64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23
[   64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[   64.076803] Call Trace:
[   64.076809]  dump_stack+0x5c/0x77
[   64.076817]  kasan_report+0x163/0x380
[   64.085859]  ? rdma_join_multicast+0x26e/0x12c0
[   64.086634]  rdma_join_multicast+0x26e/0x12c0
[   64.087370]  ? rdma_disconnect+0xf0/0xf0
[   64.088579]  ? __radix_tree_replace+0xc3/0x110
[   64.089132]  ? node_tag_clear+0x81/0xb0
[   64.089606]  ? idr_alloc_u32+0x12e/0x1a0
[   64.090517]  ? __fprop_inc_percpu_max+0x150/0x150
[   64.091768]  ? tracing_record_taskinfo+0x10/0xc0
[   64.092340]  ? idr_alloc+0x76/0xc0
[   64.092951]  ? idr_alloc_u32+0x1a0/0x1a0
[   64.093632]  ? ucma_process_join+0x23d/0x460
[   64.094510]  ucma_process_join+0x23d/0x460
[   64.095199]  ? ucma_migrate_id+0x440/0x440
[   64.095696]  ? futex_wake+0x10b/0x2a0
[   64.096159]  ucma_join_multicast+0x88/0xe0
[   64.096660]  ? ucma_process_join+0x460/0x460
[   64.097540]  ? _copy_from_user+0x5e/0x90
[   64.098017]  ucma_write+0x174/0x1f0
[   64.098640]  ? ucma_resolve_route+0xf0/0xf0
[   64.099343]  ? rb_erase_cached+0x6c7/0x7f0
[   64.099839]  __vfs_write+0xc4/0x350
[   64.100622]  ? perf_syscall_enter+0xe4/0x5f0
[   64.101335]  ? kernel_read+0xa0/0xa0
[   64.103525]  ? perf_sched_cb_inc+0xc0/0xc0
[   64.105510]  ? syscall_exit_register+0x2a0/0x2a0
[   64.107359]  ? __switch_to+0x351/0x640
[   64.109285]  ? fsnotify+0x899/0x8f0
[   64.111610]  ? fsnotify_unmount_inodes+0x170/0x170
[   64.113876]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   64.115813]  ? ring_buffer_record_is_on+0xd/0x20
[   64.117824]  ? __fget+0xa8/0xf0
[   64.119869]  vfs_write+0xf7/0x280
[   64.122001]  SyS_write+0xa1/0x120
[   64.124213]  ? SyS_read+0x120/0x120
[   64.126644]  ? SyS_read+0x120/0x120
[   64.128563]  do_syscall_64+0xeb/0x250
[   64.130732]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   64.132984] RIP: 0033:0x7f5c994ade99
[   64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[   64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[   64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[   64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[   64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[   64.151060]
[   64.153703] Disabling lock debugging due to kernel taint
[   64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[   64.159066] IP: rdma_join_multicast+0x26e/0x12c0
[   64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0
[   64.164442] Oops: 0000 [#1] SMP KASAN PTI
[   64.166817] CPU: 1 PID: 691 Comm: join Tainted: G    B 4.16.0-rc1-00219-gb97853b65b93 #23
[   64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[   64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0
[   64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282
[   64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522
[   64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297
[   64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7
[   64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000
[   64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400
[   64.196105] FS:  00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000
[   64.199211] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0
[   64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   64.211554] Call Trace:
[   64.213464]  ? rdma_disconnect+0xf0/0xf0
[   64.216124]  ? __radix_tree_replace+0xc3/0x110
[   64.219337]  ? node_tag_clear+0x81/0xb0
[   64.222140]  ? idr_alloc_u32+0x12e/0x1a0
[   64.224422]  ? __fprop_inc_percpu_max+0x150/0x150
[   64.226588]  ? tracing_record_taskinfo+0x10/0xc0
[   64.229763]  ? idr_alloc+0x76/0xc0
[   64.232186]  ? idr_alloc_u32+0x1a0/0x1a0
[   64.234505]  ? ucma_process_join+0x23d/0x460
[   64.237024]  ucma_process_join+0x23d/0x460
[   64.240076]  ? ucma_migrate_id+0x440/0x440
[   64.243284]  ? futex_wake+0x10b/0x2a0
[   64.245302]  ucma_join_multicast+0x88/0xe0
[   64.247783]  ? ucma_process_join+0x460/0x460
[   64.250841]  ? _copy_from_user+0x5e/0x90
[   64.253878]  ucma_write+0x174/0x1f0
[   64.257008]  ? ucma_resolve_route+0xf0/0xf0
[   64.259877]  ? rb_erase_cached+0x6c7/0x7f0
[   64.262746]  __vfs_write+0xc4/0x350
[   64.265537]  ? perf_syscall_enter+0xe4/0x5f0
[   64.267792]  ? kernel_read+0xa0/0xa0
[   64.270358]  ? perf_sched_cb_inc+0xc0/0xc0
[   64.272575]  ? syscall_exit_register+0x2a0/0x2a0
[   64.275367]  ? __switch_to+0x351/0x640
[   64.277700]  ? fsnotify+0x899/0x8f0
[   64.280530]  ? fsnotify_unmount_inodes+0x170/0x170
[   64.283156]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   64.286182]  ? ring_buffer_record_is_on+0xd/0x20
[   64.288749]  ? __fget+0xa8/0xf0
[   64.291136]  vfs_write+0xf7/0x280
[   64.292972]  SyS_write+0xa1/0x120
[   64.294965]  ? SyS_read+0x120/0x120
[   64.297474]  ? SyS_read+0x120/0x120
[   64.299751]  do_syscall_64+0xeb/0x250
[   64.301826]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   64.304352] RIP: 0033:0x7f5c994ade99
[   64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[   64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[   64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[   64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[   64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[   64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8
[   64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860
[   64.332979] CR2: 00000000000000b0
[   64.335550] ---[ end trace 0c00c17a408849c1 ]---

Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com>
Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: bridge: ebt_among: add more missing match size checks
Florian Westphal [Fri, 9 Mar 2018 13:27:31 +0000 (14:27 +0100)]
netfilter: bridge: ebt_among: add more missing match size checks

commit c8d70a700a5b486bfa8e5a7d33d805389f6e59f9 upstream.

ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.

commit c4585a2823edf ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.

v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part

NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.

Tested with same rules from the earlier patch.

Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks")
Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: bridge: ebt_among: add missing match size checks
Florian Westphal [Mon, 19 Feb 2018 02:01:45 +0000 (03:01 +0100)]
netfilter: bridge: ebt_among: add missing match size checks

commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream.

ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.

Therefore it must check that the size of the match structure
provided from userspace is sane by making sure em->match_size
is at least the minimum size of the expected structure.

The module has such a check, but its only done after accessing
a structure that might be out of bounds.

tested with: ebtables -A INPUT ... \
--among-dst fe:fe:fe:fe:fe:fe
--among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe
--among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe

Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: seq: Clear client entry before deleting else at closing
Takashi Iwai [Fri, 9 Mar 2018 21:23:31 +0000 (22:23 +0100)]
ALSA: seq: Clear client entry before deleting else at closing

commit a2ff19f7b70118ced291a28d5313469914de451b upstream.

When releasing a client, we need to clear the clienttab[] entry at
first, then call snd_seq_queue_client_leave().  Otherwise, the
in-flight cell in the queue might be picked up by the timer interrupt
via snd_seq_check_queue() before calling snd_seq_queue_client_leave(),
and it's delivered to another queue while the client is clearing
queues.  This may eventually result in an uncleared cell remaining in
a queue, and the later snd_seq_pool_delete() may need to wait for a
long time until the event gets really processed.

By moving the clienttab[] clearance at the beginning of release, any
event delivery of a cell belonging to this client will fail at a later
point, since snd_seq_client_ptr() returns NULL.  Thus the cell that
was picked up by the timer interrupt will be returned immediately
without further delivery, and the long stall of snd_seq_delete_pool()
can be avoided, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: seq: Fix possible UAF in snd_seq_check_queue()
Takashi Iwai [Fri, 9 Mar 2018 20:58:28 +0000 (21:58 +0100)]
ALSA: seq: Fix possible UAF in snd_seq_check_queue()

commit d0f833065221cbfcbadf19fd4102bcfa9330006a upstream.

Although we've covered the races between concurrent write() and
ioctl() in the previous patch series, there is still a possible UAF in
the following scenario:

A: user client closed B: timer irq
  -> snd_seq_release()   -> snd_seq_timer_interrupt()
    -> snd_seq_free_client()     -> snd_seq_check_queue()
      -> cell = snd_seq_prioq_cell_peek()
      -> snd_seq_prioq_leave()
         .... removing all cells
      -> snd_seq_pool_done()
         .... vfree()
      -> snd_seq_compare_tick_time(cell)
         ... Oops

So the problem is that a cell is peeked and accessed without any
protection until it's retrieved from the queue again via
snd_seq_prioq_cell_out().

This patch tries to address it, also cleans up the code by a slight
refactoring.  snd_seq_prioq_cell_out() now receives an extra pointer
argument.  When it's non-NULL, the function checks the event timestamp
with the given pointer.  The caller needs to pass the right reference
either to snd_seq_tick or snd_seq_realtime depending on the event
timestamp type.

A good news is that the above change allows us to remove the
snd_seq_prioq_cell_peek(), too, thus the patch actually reduces the
code size.

Reviewed-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: Deleted function had different log message]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoxhci: Fix front USB ports on ASUS PRIME B350M-A
Kai-Heng Feng [Thu, 8 Mar 2018 15:17:17 +0000 (17:17 +0200)]
xhci: Fix front USB ports on ASUS PRIME B350M-A

commit 191edc5e2e515aab1075a3f0ef23599e80be5f59 upstream.

When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[  549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
[  549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[  549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)

Delay before running xHC command CMD_RUN can workaround the issue.

Use a new quirk to make the delay only targets to the affected xHC.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agousb: usbmon: Read text within supplied buffer size
Pete Zaitcev [Fri, 9 Mar 2018 06:21:14 +0000 (00:21 -0600)]
usb: usbmon: Read text within supplied buffer size

commit a5f596830e27e15f7a0ecd6be55e433d776986d8 upstream.

This change fixes buffer overflows and silent data corruption with the
usbmon device driver text file read operations.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoUSB: usbmon: remove assignment from IS_ERR argument
Julia Lawall [Sat, 26 Dec 2015 21:57:44 +0000 (22:57 +0100)]
USB: usbmon: remove assignment from IS_ERR argument

commit 46c236dc7d1212d7417e6fb0317f91c44c719322 upstream.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2;
statement S1,S2;
@@

+e1 = e2;
if (IS_ERR(
    e1
-   = e2
   )) S1 else S2
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agox86/MCE: Save microcode revision in machine check records
Tony Luck [Tue, 6 Mar 2018 14:21:41 +0000 (15:21 +0100)]
x86/MCE: Save microcode revision in machine check records

commit fa94d0c6e0f3431523f5701084d799c77c7d4a4f upstream.

Updating microcode used to be relatively rare. Now that it has become
more common we should save the microcode version in a machine check
record to make sure that those people looking at the error have this
important information bundled with the rest of the logged information.

[ Borislav: Simplify a bit. ]

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com
[bwh: Backported to 3.2:
 - Add other new fields to struct mce, to match upstream UAPI
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Check that user doesn't overflow QP state
Leon Romanovsky [Wed, 7 Mar 2018 16:49:16 +0000 (18:49 +0200)]
RDMA/ucma: Check that user doesn't overflow QP state

commit a5880b84430316e3e1c1f5d23aa32ec6000cc717 upstream.

The QP state is limited and declared in enum ib_qp_state,
but ucma user was able to supply any possible (u32) value.

Reported-by: syzbot+0df1ab766f8924b1edba@syzkaller.appspotmail.com
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoRDMA/ucma: Limit possible option size
Leon Romanovsky [Wed, 7 Mar 2018 12:49:09 +0000 (14:49 +0200)]
RDMA/ucma: Limit possible option size

commit 6a21dfc0d0db7b7e0acedce67ca533a6eb19283c upstream.

Users of ucma are supposed to provide size of option level,
in most paths it is supposed to be equal to u8 or u16, but
it is not the case for the IB path record, where it can be
multiple of struct ib_path_rec_data.

This patch takes simplest possible approach and prevents providing
values more than possible to allocate.

Reported-by: syzbot+a38b0e9f694c379ca7ce@syzkaller.appspotmail.com
Fixes: 7ce86409adcd ("RDMA/ucma: Allow user space to set service type")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agol2tp: do not accept arbitrary sockets
Eric Dumazet [Tue, 6 Mar 2018 15:54:53 +0000 (07:54 -0800)]
l2tp: do not accept arbitrary sockets

commit 17cfe79a65f98abe535261856c5aef14f306dff7 upstream.

syzkaller found an issue caused by lack of sufficient checks
in l2tp_tunnel_create()

RAW sockets can not be considered as UDP ones for instance.

In another patch, we shall replace all pr_err() by less intrusive
pr_debug() so that syzkaller can find other bugs faster.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>
==================================================================
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
dst_release: dst:00000000d53d0d0f refcnt:-1
Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242

CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23b/0x360 mm/kasan/report.c:412
 __asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435
 setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
 l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596
 pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707
 SYSC_connect+0x213/0x4a0 net/socket.c:1640
 SyS_connect+0x24/0x30 net/socket.c:1621
 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agousb: quirks: add control message delay for 1b1c:1b20
Danilo Krummrich [Tue, 6 Mar 2018 08:38:49 +0000 (09:38 +0100)]
usb: quirks: add control message delay for 1b1c:1b20

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream.

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoe1000e: Fix check_for_link return value with autoneg off
Benjamin Poirier [Tue, 20 Feb 2018 06:12:00 +0000 (15:12 +0900)]
e1000e: Fix check_for_link return value with autoneg off

commit 4e7dc08e57c95673d2edaba8983c3de4dd1f65f5 upstream.

When autoneg is off, the .check_for_link callback functions clear the
get_link_status flag and systematically return a "pseudo-error". This means
that the link is not detected as up until the next execution of the
e1000_watchdog_task() 2 seconds later.

Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoahci: Add PCI-id for the Highpoint Rocketraid 644L card
Hans de Goede [Fri, 2 Mar 2018 10:36:32 +0000 (11:36 +0100)]
ahci: Add PCI-id for the Highpoint Rocketraid 644L card

commit 28b2182dad43f6f8fcbd167539a26714fd12bd64 upstream.

Like the Highpoint Rocketraid 642L and cards using a Marvel 88SE9235
controller in general, this RAID card also supports AHCI mode and short
of a custom driver, this is the only way to make it work under Linux.

Note that even though the card is called to 644L, it has a product-id
of 0x0645.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoserial: sh-sci: prevent lockup on full TTY buffers
Ulrich Hecht [Thu, 15 Feb 2018 12:02:27 +0000 (13:02 +0100)]
serial: sh-sci: prevent lockup on full TTY buffers

commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream.

When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Use sci_in()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agotty: make n_tty_read() always abort if hangup is in progress
Tejun Heo [Tue, 13 Feb 2018 15:38:08 +0000 (07:38 -0800)]
tty: make n_tty_read() always abort if hangup is in progress

commit 28b0f8a6962a24ed21737578f3b1b07424635c9e upstream.

A tty is hung up by __tty_hangup() setting file->f_op to
hung_up_tty_fops, which is skipped on ttys whose write operation isn't
tty_write().  This means that, for example, /dev/console whose write
op is redirected_tty_write() is never actually marked hung up.

Because n_tty_read() uses the hung up status to decide whether to
abort the waiting readers, the lack of hung-up marking can lead to the
following scenario.

 1. A session contains two processes.  The leader and its child.  The
    child ignores SIGHUP.

 2. The leader exits and starts disassociating from the controlling
    terminal (/dev/console).

 3. __tty_hangup() skips setting f_op to hung_up_tty_fops.

 4. SIGHUP is delivered and ignored.

 5. tty_ldisc_hangup() is invoked.  It wakes up the waits which should
    clear the read lockers of tty->ldisc_sem.

 6. The reader wakes up but because tty_hung_up_p() is false, it
    doesn't abort and goes back to sleep while read-holding
    tty->ldisc_sem.

 7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup()
    and is now stuck in D sleep indefinitely waiting for
    tty->ldisc_sem.

The following is Alan's explanation on why some ttys aren't hung up.

 http://lkml.kernel.org/r/20171101170908.6ad08580@alans-desktop

 1. It broke the serial consoles because they would hang up and close
    down the hardware. With tty_port that *should* be fixable properly
    for any cases remaining.

 2. The console layer was (and still is) completely broken and doens't
    refcount properly. So if you turn on console hangups it breaks (as
    indeed does freeing consoles and half a dozen other things).

As neither can be fixed quickly, this patch works around the problem
by introducing a new flag, TTY_HUPPING, which is used solely to tell
n_tty_read() that hang-up is in progress for the console and the
readers should be aborted regardless of the hung-up status of the
device.

The following is a sample hung task warning caused by this issue.

  INFO: task agetty:2662 blocked for more than 120 seconds.
        Not tainted 4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      0  2662      1 0x00000086
  Call Trace:
   __schedule+0x267/0x890
   schedule+0x36/0x80
   schedule_timeout+0x23c/0x2e0
   ldsem_down_write+0xce/0x1f6
   tty_ldisc_lock+0x16/0x30
   tty_ldisc_hangup+0xb3/0x1b0
   __tty_hangup+0x300/0x410
   disassociate_ctty+0x6c/0x290
   do_exit+0x7ef/0xb00
   do_group_exit+0x3f/0xa0
   get_signal+0x1b3/0x5d0
   do_signal+0x28/0x660
   exit_to_usermode_loop+0x46/0x86
   do_syscall_64+0x9c/0xb0
   entry_SYSCALL64_slow_path+0x25/0x25

The following is the repro.  Run "$PROG /dev/console".  The parent
process hangs in D state.

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <sys/wait.h>
  #include <sys/ioctl.h>
  #include <fcntl.h>
  #include <unistd.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <errno.h>
  #include <signal.h>
  #include <time.h>
  #include <termios.h>

  int main(int argc, char **argv)
  {
  struct sigaction sact = { .sa_handler = SIG_IGN };
  struct timespec ts1s = { .tv_sec = 1 };
  pid_t pid;
  int fd;

  if (argc < 2) {
  fprintf(stderr, "test-hung-tty /dev/$TTY\n");
  return 1;
  }

  /* fork a child to ensure that it isn't already the session leader */
  pid = fork();
  if (pid < 0) {
  perror("fork");
  return 1;
  }

  if (pid > 0) {
  /* top parent, wait for everyone */
  while (waitpid(-1, NULL, 0) >= 0)
  ;
  if (errno != ECHILD)
  perror("waitpid");
  return 0;
  }

  /* new session, start a new session and set the controlling tty */
  if (setsid() < 0) {
  perror("setsid");
  return 1;
  }

  fd = open(argv[1], O_RDWR);
  if (fd < 0) {
  perror("open");
  return 1;
  }

  if (ioctl(fd, TIOCSCTTY, 1) < 0) {
  perror("ioctl");
  return 1;
  }

  /* fork a child, sleep a bit and exit */
  pid = fork();
  if (pid < 0) {
  perror("fork");
  return 1;
  }

  if (pid > 0) {
  nanosleep(&ts1s, NULL);
  printf("Session leader exiting\n");
  exit(0);
  }

  /*
   * The child ignores SIGHUP and keeps reading from the controlling
   * tty.  Because SIGHUP is ignored, the child doesn't get killed on
   * parent exit and the bug in n_tty makes the read(2) block the
   * parent's control terminal hangup attempt.  The parent ends up in
   * D sleep until the child is explicitly killed.
   */
  sigaction(SIGHUP, &sact, NULL);
  printf("Child reading tty\n");
  while (1) {
  char buf[1024];

  if (read(fd, buf, sizeof(buf)) < 0) {
  perror("read");
  return 1;
  }
  }

  return 0;
  }

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@llwyncelyn.cymru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: TTY_HUPPING is not really a new flag; it's an old flag
 that was wrongly removed in 3.19.  Just add the test for it in n_tty_read().]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agotpm_tis: fix potential buffer overruns caused by bit glitches on the bus
Jeremy Boone [Thu, 8 Feb 2018 20:32:06 +0000 (12:32 -0800)]
tpm_tis: fix potential buffer overruns caused by bit glitches on the bus

commit 6bb320ca4a4a7b5b3db8c8d7250cc40002046878 upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agol2tp: fix race in pppol2tp_release with session object destroy
James Chapman [Fri, 23 Feb 2018 17:45:46 +0000 (17:45 +0000)]
l2tp: fix race in pppol2tp_release with session object destroy

commit d02ba2a6110c530a32926af8ad441111774d2893 upstream.

pppol2tp_release uses call_rcu to put the final ref on its socket. But
the session object doesn't hold a ref on the session socket so may be
freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by
having the session hold a ref on its socket until the session is
destroyed. It is this ref that is dropped via call_rcu.

Sessions are also deleted via l2tp_tunnel_closeall. This must now also put
the final ref via call_rcu. So move the call_rcu call site into
pppol2tp_session_close so that this happens in both destroy paths. A
common destroy path should really be implemented, perhaps with
l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release
does, but this will be looked at later.

ODEBUG: activate active (active state 1) object type: rcu_head hint:           (null)
WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220
Modules linked in:
CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:debug_print_object+0x166/0x220
RSP: 0018:ffff880013647a00 EFLAGS: 00010082
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0
RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0
Call Trace:
 debug_object_activate+0x38b/0x530
 ? debug_object_assert_init+0x3b0/0x3b0
 ? __mutex_unlock_slowpath+0x85/0x8b0
 ? pppol2tp_session_destruct+0x110/0x110
 __call_rcu.constprop.66+0x39/0x890
 ? __call_rcu.constprop.66+0x39/0x890
 call_rcu_sched+0x17/0x20
 pppol2tp_release+0x2c7/0x440
 ? fcntl_setlk+0xca0/0xca0
 ? sock_alloc_file+0x340/0x340
 sock_release+0x92/0x1e0
 sock_close+0x1b/0x20
 __fput+0x296/0x6e0
 ____fput+0x1a/0x20
 task_work_run+0x127/0x1a0
 do_exit+0x7f9/0x2ce0
 ? SYSC_connect+0x212/0x310
 ? mm_update_next_owner+0x690/0x690
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 do_group_exit+0x10d/0x330
 ? do_group_exit+0x330/0x330
 SyS_exit_group+0x22/0x30
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f362e471259
RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259
RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000
RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000
Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e
8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41

Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agol2tp: don't use inet_shutdown on ppp session destroy
James Chapman [Fri, 23 Feb 2018 17:45:44 +0000 (17:45 +0000)]
l2tp: don't use inet_shutdown on ppp session destroy

commit 225eb26489d05c679a4c4197ffcb81c81e9dcaf4 upstream.

Previously, if a ppp session was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our session will be detached anyway).

BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0
Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296

CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
 dump_stack+0x101/0x157
 ? inet_shutdown+0x5d/0x1c0
 print_address_description+0x78/0x260
 ? inet_shutdown+0x5d/0x1c0
 kasan_report+0x240/0x360
 __asan_load4+0x78/0x80
 inet_shutdown+0x5d/0x1c0
 ? pppol2tp_show+0x80/0x80
 pppol2tp_session_close+0x68/0xb0
 l2tp_tunnel_closeall+0x199/0x210
 ? udp_v6_flush_pending_frames+0x90/0x90
 l2tp_udp_encap_destroy+0x6b/0xc0
 ? l2tp_tunnel_del_work+0x2e0/0x2e0
 udpv6_destroy_sock+0x8c/0x90
 sk_common_release+0x47/0x190
 udp_lib_close+0x15/0x20
 inet_release+0x85/0xd0
 inet6_release+0x43/0x60
 sock_release+0x53/0x100
 ? sock_alloc_file+0x260/0x260
 sock_close+0x1b/0x20
 __fput+0x19f/0x380
 ____fput+0x1a/0x20
 task_work_run+0xd2/0x110
 exit_to_usermode_loop+0x18d/0x190
 do_syscall_64+0x389/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7fe240a45259
RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259
RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5
RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000
R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000
R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040

Allocated by task 8331:
 save_stack+0x43/0xd0
 kasan_kmalloc+0xad/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0x144/0x3e0
 sock_alloc_inode+0x22/0x130
 alloc_inode+0x3d/0xf0
 new_inode_pseudo+0x1c/0x90
 sock_alloc+0x30/0x110
 __sock_create+0xaa/0x4c0
 SyS_socket+0xbe/0x130
 do_syscall_64+0x128/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b

Freed by task 8314:
 save_stack+0x43/0xd0
 __kasan_slab_free+0x11a/0x170
 kasan_slab_free+0xe/0x10
 kmem_cache_free+0x88/0x2b0
 sock_destroy_inode+0x49/0x50
 destroy_inode+0x77/0xb0
 evict+0x285/0x340
 iput+0x429/0x530
 dentry_unlink_inode+0x28c/0x2c0
 __dentry_kill+0x1e3/0x2f0
 dput.part.21+0x500/0x560
 dput+0x24/0x30
 __fput+0x2aa/0x380
 ____fput+0x1a/0x20
 task_work_run+0xd2/0x110
 exit_to_usermode_loop+0x18d/0x190
 do_syscall_64+0x389/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b

Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: deleted code is formatted a bit differently]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agobatman-adv: fix packet checksum in receive path
Matthias Schiffer [Tue, 23 Jan 2018 09:59:49 +0000 (10:59 +0100)]
batman-adv: fix packet checksum in receive path

commit abd6360591d3f8259f41c34e31ac4826dfe621b8 upstream.

eth_type_trans() internally calls skb_pull(), which does not adjust the
skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the
form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are
received.

Note that in usual setups, packets don't reach batman-adv with
CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see
batadv's ethtype?), which is why the log messages do not occur on every
system using batman-adv. I could reproduce this issue by stacking
batman-adv on top of a VXLAN interface.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Tested-by: Maximilian Wilhelm <max@sdn.clinic>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoALSA: usb-audio: Add a quirck for B&W PX headphones
Erik Veijola [Fri, 23 Feb 2018 12:06:52 +0000 (14:06 +0200)]
ALSA: usb-audio: Add a quirck for B&W PX headphones

commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream.

The capture interface doesn't work and the playback interface only
supports 48 kHz sampling rate even though it advertises more rates.

Signed-off-by: Erik Veijola <erik.veijola@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agodrm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE
Ben Crocker [Thu, 22 Feb 2018 22:52:19 +0000 (17:52 -0500)]
drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE

commit 2c83029cda55a5e7665c7c6326909427d6a01350 upstream.

In radeon_device_init, set the need_dma32 flag for Cedar chips
(e.g. FirePro 2270).  This fixes, or at least works around, a bug
on PowerPC exposed by last year's commits

8e3f1b1d8255105f31556aacf8aeb6071b00d469 (Russell Currey)

and

253fd51e2f533552ae35a0c661705da6c4842c1b (Alistair Popple)

which enabled the 64-bit DMA iommu bypass.

This caused the device to freeze, in some cases unrecoverably, and is
the subject of several bug reports internal to Red Hat.

Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoregulatory: add NUL to request alpha2
Johannes Berg [Thu, 22 Feb 2018 19:55:28 +0000 (20:55 +0100)]
regulatory: add NUL to request alpha2

commit 657308f73e674e86b60509a430a46e569bf02846 upstream.

Similar to the ancient commit a5fe8e7695dc ("regulatory: add NUL
to alpha2"), add another byte to alpha2 in the request struct so
that when we use nla_put_string(), we don't overrun anything.

Fixes: 73d54c9e74c4 ("cfg80211: add regulatory netlink multicast group")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agokernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
David Rientjes [Wed, 21 Feb 2018 22:45:32 +0000 (14:45 -0800)]
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE

commit 88913bd8ea2a75d7e460a4bed5f75e1c32660d7e upstream.

chan->n_subbufs is set by the user and relay_create_buf() does a kmalloc()
of chan->n_subbufs * sizeof(size_t *).

kmalloc_slab() will generate a warning when this fails if
chan->subbufs * sizeof(size_t *) > KMALLOC_MAX_SIZE.

Limit chan->n_subbufs to the maximum allowed kmalloc() size.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1802061216100.122576@chino.kir.corp.google.com
Fixes: f6302f1bcd75 ("relay: prevent integer overflow in relay_open()")
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agolibata: disable LPM for Crucial BX100 SSD 500GB drive
Kai-Heng Feng [Sun, 18 Feb 2018 14:17:09 +0000 (22:17 +0800)]
libata: disable LPM for Crucial BX100 SSD 500GB drive

commit b17e5729a630d8326a48ec34ef02e6b4464a6aef upstream.

After Laptop Mode Tools starts to use min_power for LPM, a user found
out Crucial BX100 SSD can't get mounted.

Crucial BX100 SSD 500GB drive don't work well with min_power. This also
happens to med_power_with_dipm.

So let's disable LPM for Crucial BX100 SSD 500GB drive.

BugLink: https://bugs.launchpad.net/bugs/1726930
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agox86/mm: Fix {pmd,pud}_{set,clear}_flags()
Jan Beulich [Mon, 19 Feb 2018 14:48:11 +0000 (07:48 -0700)]
x86/mm: Fix {pmd,pud}_{set,clear}_flags()

commit 842cef9113c2120f74f645111ded1e020193d84c upstream.

Just like pte_{set,clear}_flags() their PMD and PUD counterparts should
not do any address translation. This was outright wrong under Xen
(causing a dead boot with no useful output on "suitable" systems), and
produced needlessly more complicated code (even if just slightly) when
paravirt was enabled.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5A8AF1BB02000078001A91C3@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2:
 - There aren't any pud_{set,clear}_flags() functions
 - There's no p4d level]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: IDLETIMER: be syzkaller friendly
Eric Dumazet [Sat, 17 Feb 2018 03:36:28 +0000 (19:36 -0800)]
netfilter: IDLETIMER: be syzkaller friendly

commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream.

We had one report from syzkaller [1]

First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.

Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.

[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 panic+0x1e4/0x41c kernel/panic.c:183
 __warn+0x1dc/0x200 kernel/panic.c:547
 report_bug+0x211/0x2d0 lib/bug.c:184
 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
 fixup_bug arch/x86/kernel/traps.c:247 [inline]
 do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
 queue_work include/linux/workqueue.h:488 [inline]
 schedule_work include/linux/workqueue.h:546 [inline]
 idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:541 [inline]
 smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
 </IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378
 debug_object_init+0x17/0x20 lib/debugobjects.c:391
 __init_work+0x2b/0x60 kernel/workqueue.c:506
 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
 idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
 find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
 do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
 nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
 SYSC_setsockopt net/socket.c:1850 [inline]
 SyS_setsockopt+0x189/0x360 net/socket.c:1829
 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agolibata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
Hans de Goede [Fri, 16 Feb 2018 09:48:20 +0000 (10:48 +0100)]
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs

commit 9c7be59fc519af9081c46c48f06f2b8fadf55ad8 upstream.

Various people have reported the Crucial MX100 512GB model not working
with LPM set to min_power. I've now received a report that it also does
not work with the new med_power_with_dipm level.

It does work with medium_power, but that has no measurable power-savings
and given the amount of people being bitten by the other levels not
working, this commit just disables LPM altogether.

Note all reporters of this have either the 512GB model (max capacity), or
are not specifying their SSD's size. So for now this quirk assumes this is
a problem with the 512GB model only.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261
Buglink: https://github.com/linrunner/TLP/issues/84
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[bwh: Backported to 3.2: Drop the TRIM quirk flags, which aren't supported]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonospec: Allow index argument to have const-qualified type
Rasmus Villemoes [Fri, 16 Feb 2018 21:20:48 +0000 (13:20 -0800)]
nospec: Allow index argument to have const-qualified type

commit b98c6a160a057d5686a8c54c79cc6c8c94a7d0c8 upstream.

The last expression in a statement expression need not be a bare
variable, quoting gcc docs

  The last thing in the compound statement should be an expression
  followed by a semicolon; the value of this subexpression serves as the
  value of the entire construct.

and we already use that in e.g. the min/max macros which end with a
ternary expression.

This way, we can allow index to have const-qualified type, which will in
some cases avoid the need for introducing a local copy of index of
non-const qualified type. That, in turn, can prevent readers not
familiar with the internals of array_index_nospec from wondering about
the seemingly redundant extra variable, and I think that's worthwhile
considering how confusing the whole _nospec business is.

The expression _i&_mask has type unsigned long (since that is the type
of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to
that), so in order not to change the type of the whole expression, add
a cast back to typeof(_i).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agodn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
Paolo Abeni [Thu, 15 Feb 2018 15:59:49 +0000 (16:59 +0100)]
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock

commit dfec091439bb2acf763497cfc58f2bdfc67c56b7 upstream.

After commit 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), the caller of nf_{get/set}sockopt() must
not hold any lock, but, in such changeset, I forgot to cope with DECnet.

This commit addresses the issue moving the nf call outside the lock,
in the dn_{get,set}sockopt() with the same schema currently used by
ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main
switch statements, to improve code readability.

Reported-by: Petr Vandrovec <petr@vandrovec.name>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2
Fixes: 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoAdd delay-init quirk for Corsair K70 RGB keyboards
Jack Stocker [Thu, 15 Feb 2018 18:24:10 +0000 (18:24 +0000)]
Add delay-init quirk for Corsair K70 RGB keyboards

commit 7a1646d922577b5b48c0d222e03831141664bb59 upstream.

Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.

Device ids found here:
usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Corsair K70 RGB Gaming Keyboard

Signed-off-by: Jack Stocker <jackstocker.93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agousb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_ur...
AMAN DEEP [Thu, 8 Feb 2018 03:55:01 +0000 (11:55 +0800)]
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()

commit 46408ea558df13b110e0866b99624384a33bdeba upstream.

There is a race condition between finish_unlinks->finish_urb() function
and usb_kill_urb() in ohci controller case. The finish_urb calls
spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call,
then if during this time, usb_kill_urb is called for another endpoint,
then new ed will be added to ed_rm_list at beginning for unlink, and
ed_rm_list will point to newly added.

When finish_urb() is completed in finish_unlinks() and ed->td_list
becomes empty as in below code (in finish_unlinks() function):

        if (list_empty(&ed->td_list)) {
                *last = ed->ed_next;
                ed->ed_next = NULL;
        } else if (ohci->rh_state == OHCI_RH_RUNNING) {
                *last = ed->ed_next;
                ed->ed_next = NULL;
                ed_schedule(ohci, ed);
        }

The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next
and previously added ed by usb_kill_urb will be left unreferenced by
ed_rm_list. This causes usb_kill_urb() hang forever waiting for
finish_unlink to remove added ed from ed_rm_list.

The main reason for hang in this race condtion is addition and removal
of ed from ed_rm_list in the beginning during usb_kill_urb and later
last* is modified in finish_unlinks().

As suggested by Alan Stern, the solution for proper handling of
ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing
any URBs. Then at the end, we can add ed back to the list if necessary.

This properly handle the updated ohci->ed_rm_list in usb_kill_urb().

Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Aman Deep <aman.deep@samsung.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoUSB: OHCI: Fix race between ED unlink and URB submission
Alan Stern [Tue, 30 Jun 2015 15:25:54 +0000 (11:25 -0400)]
USB: OHCI: Fix race between ED unlink and URB submission

commit 7d8021c967648accd1b78e5e1ddaad655cd2c61f upstream.

This patch fixes a bug introduced by commit 977dcfdc6031 ("USB: OHCI:
don't lose track of EDs when a controller dies").  The commit changed
ed_state from ED_UNLINK to ED_IDLE too early, before finish_urb() had
been called.  The user-visible consequence is that the driver
occasionally crashes or locks up when an URB is submitted while
another URB for the same endpoint is being unlinked.

This patch moves the ED state change later, to the right place.  The
drawback is that now we may unnecessarily execute some instructions
multiple times when a controller dies.  Since controllers dying is an
exceptional occurrence, a little wasted time won't matter.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Heiko Przybyl <lil_tux@web.de>
Tested-by: Heiko Przybyl <lil_tux@web.de>
Fixes: 977dcfdc60311e7aa571cabf6f39c36dde13339e
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agopowerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n
Corentin Labbe [Wed, 14 Feb 2018 12:17:47 +0000 (12:17 +0000)]
powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n

commit c1e150ceb61e4a585bad156da15c33bfe89f5858 upstream.

When CONFIG_NUMA is not set, the build fails with:

  arch/powerpc/platforms/pseries/hotplug-cpu.c:335:4:
  error: déclaration implicite de la fonction « update_numa_cpu_lookup_table »

So we have to add update_numa_cpu_lookup_table() as an empty function
when CONFIG_NUMA is not set.

Fixes: 1d9a090783be ("powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: nat: cope with negative port range
Paolo Abeni [Wed, 14 Feb 2018 16:21:19 +0000 (17:21 +0100)]
netfilter: nat: cope with negative port range

commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream.

syzbot reported a division by 0 bug in the netfilter nat code:

divide error: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88
RSP: 0018:ffff8801b2466778 EFLAGS: 00010246
RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c
RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac
RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900
R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153
R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c
FS:  00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30
  get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362
  nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406
  nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124
  redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41
  nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302
  nf_nat_ipv6_local_fn+0x33/0x5d0
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407
  ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook include/linux/netfilter.h:243 [inline]
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142
  dccp_connect+0x369/0x670 net/dccp/output.c:564
  dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946
  __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620
  inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684
  SYSC_connect+0x213/0x4a0 net/socket.c:1639
  SyS_connect+0x24/0x30 net/socket.c:1620
  do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x441c69
RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69
RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590
R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000
Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b
45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48
c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01
RIP: nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778

The problem is that currently we don't have any check on the
configured port range. A port range == -1 triggers the bug, while
other negative values may require a very long time to complete the
following loop.

This commit addresses the issue swapping the two ends on negative
ranges. The check is performed in nf_nat_l4proto_unique_tuple() since
the nft nat loads the port values from nft registers at runtime.

v1 -> v2: use the correct 'Fixes' tag
v2 -> v3: update commit message, drop unneeded READ_ONCE()

Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack")
Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: x_tables: fix missing timer initialization in xt_LED
Paolo Abeni [Mon, 12 Feb 2018 17:49:39 +0000 (18:49 +0100)]
netfilter: x_tables: fix missing timer initialization in xt_LED

commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream.

syzbot reported that xt_LED may try to use the ledinternal->timer
without previously initializing it:

------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline]
RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102
RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293
RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6
RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68
RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c
R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000
R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90
FS:  0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491
  ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633
  addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008
  process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
  worker_thread+0x223/0x1990 kernel/workqueue.c:2247
  kthread+0x33c/0x400 kernel/kthread.c:238
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429
Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb
57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3
57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70
RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8
RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8
---[ end trace f661ab06f5dd8b3d ]---

The ledinternal struct can be shared between several different
xt_LED targets, but the related timer is currently initialized only
if the first target requires it. Fix it by unconditionally
initializing the timer struct.

v1 -> v2: call del_timer_sync() unconditionally, too.

Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target")
Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2: Keep using setup_timer()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: ipt_CLUSTERIP: fix a refcount bug in clusterip_config_find_get()
Cong Wang [Thu, 8 Feb 2018 21:53:52 +0000 (13:53 -0800)]
netfilter: ipt_CLUSTERIP: fix a refcount bug in clusterip_config_find_get()

commit db93a3632b0f8773a3899e04a3a3e0aa7a26eb46 upstream.

In clusterip_config_find_get() we hold RCU read lock so it could
run concurrently with clusterip_config_entry_put(), as a result,
the refcnt could go back to 1 from 0, which leads to a double
list_del()... Just replace refcount_inc() with
refcount_inc_not_zero(), as for c->refcount.

Fixes: d73f33b16883 ("netfilter: CLUSTERIP: RCU conversion")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2: s/refcount/atomic/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: drop outermost socket lock in getsockopt()
Paolo Abeni [Thu, 8 Feb 2018 11:19:00 +0000 (12:19 +0100)]
netfilter: drop outermost socket lock in getsockopt()

commit 01ea306f2ac2baff98d472da719193e738759d93 upstream.

The Syzbot reported a possible deadlock in the netfilter area caused by
rtnl lock, xt lock and socket lock being acquired with a different order
on different code paths, leading to the following backtrace:
Reviewed-by: Xin Long <lucien.xin@gmail.com>
======================================================
WARNING: possible circular locking dependency detected
4.15.0+ #301 Not tainted
------------------------------------------------------
syzkaller233489/4179 is trying to acquire lock:
  (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

but task is already holding lock:
  (&xt[i].mutex){+.+.}, at: [<00000000328553a2>]
xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041

which lock already depends on the new lock.
===

Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), we already acquire the socket lock in
the innermost scope, where needed. In such commit I forgot to remove
the outer-most socket lock from the getsockopt() path, this commit
addresses the issues dropping it now.

v1 -> v2: fix bad subj, added relavant 'fixes' tag

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonet: fix race on decreasing number of TX queues
Jakub Kicinski [Tue, 13 Feb 2018 05:35:31 +0000 (21:35 -0800)]
net: fix race on decreasing number of TX queues

commit ac5b70198adc25c73fba28de4f78adcee8f6be0b upstream.

netif_set_real_num_tx_queues() can be called when netdev is up.
That usually happens when user requests change of number of
channels/rings with ethtool -L.  The procedure for changing
the number of queues involves resetting the qdiscs and setting
dev->num_tx_queues to the new value.  When the new value is
lower than the old one, extra care has to be taken to ensure
ordering of accesses to the number of queues vs qdisc reset.

Currently the queues are reset before new dev->num_tx_queues
is assigned, leaving a window of time where packets can be
enqueued onto the queues going down, leading to a likely
crash in the drivers, since most drivers don't check if TX
skbs are assigned to an active queue.

Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoxfrm_user: uncoditionally validate esn replay attribute struct
Florian Westphal [Mon, 12 Feb 2018 13:42:01 +0000 (14:42 +0100)]
xfrm_user: uncoditionally validate esn replay attribute struct

commit d97ca5d714a5334aecadadf696875da40f1fbf3e upstream.

The sanity test added in ecd7918745234 can be bypassed, validation
only occurs if XFRM_STATE_ESN flag is set, but rest of code doesn't care
and just checks if the attribute itself is present.

So always validate.  Alternative is to reject if we have the attribute
without the flag but that would change abi.

Reported-by: syzbot+0ab777c27d2bb7588f73@syzkaller.appspotmail.com
Cc: Mathias Krause <minipli@googlemail.com>
Fixes: ecd7918745234 ("xfrm_user: ensure user supplied esn replay window is valid")
Fixes: d8647b79c3b7e ("xfrm: Add user interface for esn and big anti-replay windows")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agolibata: remove WARN() for DMA or PIO command without data
Eric Biggers [Sun, 4 Feb 2018 04:33:27 +0000 (20:33 -0800)]
libata: remove WARN() for DMA or PIO command without data

commit 9173e5e80729c8434b8d27531527c5245f4a5594 upstream.

syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0.  This
happened because it issued a READ_6 command with no data buffer.

Just remove the WARN(), as it doesn't appear indicate a kernel bug.  The
expected behavior is to fail the command, which the code does.

Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):

    #include <fcntl.h>
    #include <unistd.h>

    int main()
    {
            char buf[42] = { [36] = 0x8 /* READ_6 */ };

            write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
    }

Fixes: f92a26365a72 ("libata: change ATA_QCFLAG_DMAMAP semantics")
Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agolibata: fix length validation of ATAPI-relayed SCSI commands
Eric Biggers [Sun, 4 Feb 2018 04:30:56 +0000 (20:30 -0800)]
libata: fix length validation of ATAPI-relayed SCSI commands

commit 058f58e235cbe03e923b30ea7c49995a46a8725f upstream.

syzkaller reported a crash in ata_bmdma_fill_sg() when writing to
/dev/sg1.  The immediate cause was that the ATA command's scatterlist
was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a
write to 'qc->ap->bmdma_prd[0xffffffff]'.

Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags.  The
root cause is that when __ata_scsi_queuecmd() is preparing to relay a
SCSI command to an ATAPI device, it doesn't correctly validate the CDB
length before copying it into the 16-byte buffer 'cdb' in 'struct
ata_queued_cmd'.  Namely, it validates the fixed CDB length expected
based on the SCSI opcode but not the actual CDB length, which can be
larger due to the use of the SG_NEXT_CMD_LEN ioctl.  Since 'flags' is
the next member in ata_queued_cmd, a buffer overflow corrupts it.

Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN).

[Really it seems the length should be required to be <= dev->cdb_len,
but the current behavior seems to have been intentionally introduced by
commit 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands
in 16-byte CDBs") to work around a userspace bug in mplayer.  Probably
the workaround is no longer needed (mplayer was fixed in 2007), but
continuing to allow lengths to up 16 appears harmless for now.]

Here's a reproducer that works in QEMU when /dev/sg1 refers to the
CD-ROM drive that qemu-system-x86_64 creates by default:

    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <unistd.h>

    #define SG_NEXT_CMD_LEN 0x2283

    int main()
    {
    char buf[53] = { [36] = 0x7e, [52] = 0x02 };
    int fd = open("/dev/sg1", O_RDWR);
    ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 });
    write(fd, buf, sizeof(buf));
    }

The crash was:

    BUG: unable to handle kernel paging request at ffff8cb97db37ffc
    IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline]
    IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727
    PGD fb6c067 P4D fb6c067 PUD 0
    Oops: 0002 [#1] SMP
    CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    [...]
    Call Trace:
     ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421
     ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024
     __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline]
     ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375
     scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727
     scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865
     __blk_run_queue_uncond block/blk-core.c:412 [inline]
     __blk_run_queue+0x3a/0x60 block/blk-core.c:432
     blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78
     sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806
     sg_write+0x1ef/0x340 drivers/scsi/sg.c:677
     __vfs_write+0x31/0x160 fs/read_write.c:480
     vfs_write+0xa7/0x160 fs/read_write.c:544
     SYSC_write fs/read_write.c:589 [inline]
     SyS_write+0x4d/0xc0 fs/read_write.c:581
     do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287
     entry_SYSCALL_64_after_hwframe+0x21/0x86

Fixes: 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs")
Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agobridge: check brport attr show in brport_show
Xin Long [Mon, 12 Feb 2018 09:15:40 +0000 (17:15 +0800)]
bridge: check brport attr show in brport_show

commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f upstream.

Now br_sysfs_if file flush doesn't have attr show. To read it will
cause kernel panic after users chmod u+r this file.

Xiong found this issue when running the commands:

  ip link add br0 type bridge
  ip link add type veth
  ip link set veth0 master br0
  chmod u+r /sys/devices/virtual/net/veth0/brport/flush
  timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush

kernel crashed with NULL a pointer dereference call trace.

This patch is to fix it by return -EINVAL when brport_attr->show
is null, just the same as the check for brport_attr->store in
brport_store().

Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table")
Reported-by: Xiong Zhou <xzhou@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agousb: dwc3: gadget: Set maxpacket size for ep0 IN
Thinh Nguyen [Sat, 13 Jan 2018 02:18:05 +0000 (18:18 -0800)]
usb: dwc3: gadget: Set maxpacket size for ep0 IN

commit 6180026341e852a250e1f97ebdcf71684a3c81b9 upstream.

There are 2 control endpoint structures for DWC3. However, the driver
only updates the OUT direction control endpoint structure during
ConnectDone event. DWC3 driver needs to update the endpoint max packet
size for control IN endpoint as well. If the max packet size is not
properly set, then the driver will incorrectly calculate the data
transfer size and fail to send ZLP for HS/FS 3-stage control read
transfer.

The fix is simply to update the max packet size for the ep0 IN direction
during ConnectDone event.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoInput: matrix_keypad - fix race when disabling interrupts
Zhang Bo [Mon, 5 Feb 2018 22:56:21 +0000 (14:56 -0800)]
Input: matrix_keypad - fix race when disabling interrupts

commit ea4f7bd2aca9f68470e9aac0fc9432fd180b1fe7 upstream.

If matrix_keypad_stop() is executing and the keypad interrupt is triggered,
disable_row_irqs() may be called by both matrix_keypad_interrupt() and
matrix_keypad_stop() at the same time, causing interrupts to be disabled
twice and the keypad being "stuck" after resuming.

Take lock when setting keypad->stopped to ensure that ISR will not race
with matrix_keypad_stop() disabling interrupts.

Signed-off-by: Zhang Bo <zbsdta@126.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agos390/qeth: fix SETIP command handling
Julian Wiedmann [Fri, 9 Feb 2018 10:03:50 +0000 (11:03 +0100)]
s390/qeth: fix SETIP command handling

commit 1c5b2216fbb973a9410e0b06389740b5c1289171 upstream.

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years ago9p/trans_virtio: discard zero-length reply
Greg Kurz [Mon, 22 Jan 2018 21:02:05 +0000 (22:02 +0100)]
9p/trans_virtio: discard zero-length reply

commit 26d99834f89e76514076d9cd06f61e56e6a509b8 upstream.

When a 9p request is successfully flushed, the server is expected to just
mark it as used without sending a 9p reply (ie, without writing data into
the buffer). In this case, virtqueue_get_buf() will return len == 0 and
we must not report a REQ_STATUS_RCVD status to the client, otherwise the
client will erroneously assume the request has not been flushed.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetlink: avoid a double skb free in genlmsg_mcast()
Nicolas Dichtel [Wed, 14 Mar 2018 20:10:23 +0000 (21:10 +0100)]
netlink: avoid a double skb free in genlmsg_mcast()

commit 02a2385f37a7c6594c9d89b64c4a1451276f08eb upstream.

nlmsg_multicast() consumes always the skb, thus the original skb must be
freed only when this function is called with a clone.

Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetlink: ensure to loop over all netns in genlmsg_multicast_allns()
Nicolas Dichtel [Tue, 6 Feb 2018 13:48:32 +0000 (14:48 +0100)]
netlink: ensure to loop over all netns in genlmsg_multicast_allns()

commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 upstream.

Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e63756d5f was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.

To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.

Fixes: 134e63756d5f ("genetlink: make netns aware")
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: s/portid/pid/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agopowerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove
Nathan Fontenot [Fri, 26 Jan 2018 19:41:59 +0000 (13:41 -0600)]
powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove

commit 1d9a090783bef19fe8cdec878620d22f05191316 upstream.

When DLPAR removing a CPU, the unmapping of the cpu from a node in
unmap_cpu_from_node() should also invalidate the CPUs entry in the
numa_cpu_lookup_table. There is not a guarantee that on a subsequent
DLPAR add of the CPU the associativity will be the same and thus
could be in a different node. Invalidating the entry in the
numa_cpu_lookup_table causes the associativity to be read from the
device tree at the time of the add.

The current behavior of not invalidating the CPUs entry in the
numa_cpu_lookup_table can result in scenarios where the the topology
layout of CPUs in the partition does not match the device tree
or the topology reported by the HMC.

This bug looks like it was introduced in 2004 in the commit titled
"ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the
linux-fullhist tree. Hence tag it for all stable releases.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.2:
 - update_numa_cpu_lookup_table() wasn't defined anywhere before
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert
Cong Wang [Mon, 5 Feb 2018 22:41:45 +0000 (14:41 -0800)]
netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert

commit 7dc68e98757a8eccf8ca7a53a29b896f1eef1f76 upstream.

rateest_hash is supposed to be protected by xt_rateest_mutex,
and, as suggested by Eric, lookup and insert should be atomic,
so we should acquire the xt_rateest_mutex once for both.

So introduce a non-locking helper for internal use and keep the
locking one for external.

Reported-by: <syzbot+5cb189720978275e4c75@syzkaller.appspotmail.com>
Fixes: 5859034d7eb8 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoMIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
Matt Redfearn [Mon, 29 Jan 2018 11:26:45 +0000 (11:26 +0000)]
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS

commit 0cde5b44a30f1daaef1c34e08191239dc63271c4 upstream.

When commit b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
added board support for the RBTX4939, it added a call to
led_classdev_register even if the LED class is built as a module.
Built-in arch code cannot call module code directly like this. Commit
b33b44073734 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently
changed the inclusion of this code to a single check that
CONFIG_LEDS_CLASS is either builtin or a module, but the same issue
remains.

This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y
is set:

arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe':
setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register'
make: *** [Makefile:999: vmlinux] Error 1

Fix this by using the IS_BUILTIN() macro instead.

Fixes: b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18544/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoMIPS: TXX9: use IS_ENABLED() macro
Florian Fainelli [Tue, 31 Jan 2012 17:19:05 +0000 (18:19 +0100)]
MIPS: TXX9: use IS_ENABLED() macro

commit b33b44073734842ec0c75d376c40d0471d6113ff upstream.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3334/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agofirmware: dmi_scan: Fix handling of empty DMI strings
Jean Delvare [Sat, 3 Feb 2018 10:25:20 +0000 (11:25 +0100)]
firmware: dmi_scan: Fix handling of empty DMI strings

commit a7770ae194569e96a93c48aceb304edded9cc648 upstream.

The handling of empty DMI strings looks quite broken to me:
* Strings from 1 to 7 spaces are not considered empty.
* True empty DMI strings (string index set to 0) are not considered
  empty, and result in allocating a 0-char string.
* Strings with invalid index also result in allocating a 0-char
  string.
* Strings starting with 8 spaces are all considered empty, even if
  non-space characters follow (sounds like a weird thing to do, but
  I have actually seen occurrences of this in DMI tables before.)
* Strings which are considered empty are reported as 8 spaces,
  instead of being actually empty.

Some of these issues are the result of an off-by-one error in memcmp,
the rest is incorrect by design.

So let's get it square: missing strings and strings made of only
spaces, regardless of their length, should be treated as empty and
no memory should be allocated for them. All other strings are
non-empty and should be allocated.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 79da4721117f ("x86: fix DMI out of memory problems")
Cc: Parag Warudkar <parag.warudkar@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agofirmware/dmi_scan: constify strings
Jean Delvare [Wed, 11 Sep 2013 21:24:09 +0000 (14:24 -0700)]
firmware/dmi_scan: constify strings

commit ffbbb96dd7570b9aafd426cd77a7ee03d224cabf upstream.

Add const to all DMI string pointers where this is possible.  This fixes a
checkpatch warning.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoBtrfs: fix extent state leak from tree log
Liu Bo [Thu, 25 Jan 2018 18:02:52 +0000 (11:02 -0700)]
Btrfs: fix extent state leak from tree log

commit 55237a5f2431a72435e3ed39e4306e973c0446b7 upstream.

It's possible that btrfs_sync_log() bails out after one of the two
btrfs_write_marked_extents() which convert extent state's state bit into
EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY
and EXTENT_NEW are searched by free_log_tree() so that those extent states
with EXTENT_NEED_WAIT lead to memory leak.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonet: igmp: add a missing rcu locking section
Eric Dumazet [Thu, 1 Feb 2018 18:26:57 +0000 (10:26 -0800)]
net: igmp: add a missing rcu locking section

commit e7aadb27a5415e8125834b84a74477bfbee4eff5 upstream.

Newly added igmpv3_get_srcaddr() needs to be called under rcu lock.

Timer callbacks do not ensure this locking.

=============================
WARNING: suspicious RCU usage
4.15.0+ #200 Not tainted
-----------------------------
./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syzkaller616973/4074:
 #0:  (&mm->mmap_sem){++++}, at: [<00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355
 #1:  ((&im->timer)){+.-.}, at: [<00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline]
 #1:  ((&im->timer)){+.-.}, at: [<00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316
 #2:  (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline]
 #2:  (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600

stack backtrace:
CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592
 __in_dev_get_rcu include/linux/inetdevice.h:216 [inline]
 igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline]
 igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389
 add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432
 add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565
 igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605
 igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722
 igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831
 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:541 [inline]
 smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938

Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agomm: pin address_space before dereferencing it while isolating an LRU page
Mel Gorman [Thu, 1 Feb 2018 00:19:52 +0000 (16:19 -0800)]
mm: pin address_space before dereferencing it while isolating an LRU page

commit 69d763fc6d3aee787a3e8c8c35092b4f4960fa5d upstream.

Minchan Kim asked the following question -- what locks protects
address_space destroying when race happens between inode trauncation and
__isolate_lru_page? Jan Kara clarified by describing the race as follows

CPU1                                            CPU2

truncate(inode)                                 __isolate_lru_page()
  ...
  truncate_inode_page(mapping, page);
    delete_from_page_cache(page)
      spin_lock_irqsave(&mapping->tree_lock, flags);
        __delete_from_page_cache(page, NULL)
          page_cache_tree_delete(..)
            ...                                   mapping = page_mapping(page);
            page->mapping = NULL;
            ...
      spin_unlock_irqrestore(&mapping->tree_lock, flags);
      page_cache_free_page(mapping, page)
        put_page(page)
          if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space

                                                  if (mapping && !mapping->a_ops->migratepage)
- we've dereferenced mapping which is potentially already free.

The race is theoretically possible but unlikely.  Before the
delete_from_page_cache, truncate_cleanup_page is called so the page is
likely to be !PageDirty or PageWriteback which gets skipped by the only
caller that checks the mappping in __isolate_lru_page.  Even if the race
occurs, a substantial amount of work has to happen during a tiny window
with no preemption but it could potentially be done using a virtual
machine to artifically slow one CPU or halt it during the critical
window.

This patch should eliminate the race with truncation by try-locking the
page before derefencing mapping and aborting if the lock was not
acquired.  There was a suggestion from Huang Ying to use RCU as a
side-effect to prevent mapping being freed.  However, I do not like the
solution as it's an unconventional means of preserving a mapping and
it's not a context where rcu_read_lock is obviously protecting rcu data.

Link: http://lkml.kernel.org/r/20180104102512.2qos3h5vqzeisrek@techsingularity.net
Fixes: c82449352854 ("mm: compaction: make isolate_lru_page() filter-aware again")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: on sockopt() acquire sock lock only in the required scope
Paolo Abeni [Tue, 30 Jan 2018 18:01:40 +0000 (19:01 +0100)]
netfilter: on sockopt() acquire sock lock only in the required scope

commit 3f34cfae1238848fd53f25e5c8fd59da57901f4b upstream.

Syzbot reported several deadlocks in the netfilter area caused by
rtnl lock and socket lock being acquired with a different order on
different code paths, leading to backtraces like the following one:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc9+ #212 Not tainted
------------------------------------------------------
syzkaller041579/3682 is trying to acquire lock:
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock
include/net/sock.h:1463 [inline]
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>]
do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167

but task is already holding lock:
  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}:
        __mutex_lock_common kernel/locking/mutex.c:756 [inline]
        __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
        rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
        register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607
        tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106
        xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845
        check_target net/ipv6/netfilter/ip6_tables.c:538 [inline]
        find_check_entry.isra.7+0x935/0xcf0
net/ipv6/netfilter/ip6_tables.c:580
        translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749
        do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline]
        do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691
        nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
        nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
        ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

-> #0 (sk_lock-AF_INET6){+.+.}:
        lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914
        lock_sock_nested+0xc2/0x110 net/core/sock.c:2780
        lock_sock include/net/sock.h:1463 [inline]
        do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167
        ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(rtnl_mutex);
                                lock(sk_lock-AF_INET6);
                                lock(rtnl_mutex);
   lock(sk_lock-AF_INET6);

  *** DEADLOCK ***

1 lock held by syzkaller041579/3682:
  #0:  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

The problem, as Florian noted, is that nf_setsockopt() is always
called with the socket held, even if the lock itself is required only
for very tight scopes and only for some operation.

This patch addresses the issues moving the lock_sock() call only
where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt()
does not need anymore to acquire both locks.

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2: Drop changes to ipv6_getorigdst()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agonetfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()
Dmitry Vyukov [Tue, 30 Jan 2018 14:21:34 +0000 (15:21 +0100)]
netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()

commit 1a38956cce5eabd7b74f94bab70265e4df83165e upstream.

Commit 136e92bbec0a switched local_nodes from an array to a bitmask
but did not add proper bounds checks. As the result
clusterip_config_init_nodelist() can both over-read
ipt_clusterip_tgt_info.local_nodes and over-write
clusterip_config.local_nodes.

Add bounds checks for both.

Fixes: 136e92bbec0a ("[NETFILTER] CLUSTERIP: use a bitmap to store node responsibility data")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoscsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
Tyrel Datwyler [Wed, 24 Jan 2018 02:11:32 +0000 (20:11 -0600)]
scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info

commit c39813652700f3df552b6557530f1e5f782dbe2f upstream.

The fcp_rsp_info structure as defined in the FC spec has an initial 3
bytes reserved field. The ibmvfc driver mistakenly defined this field as
4 bytes resulting in the rsp_code field being defined in what should be
the start of the second reserved field and thus always being reported as
zero by the driver.

Ideally, we should wire ibmvfc up with libfc for the sake of code
deduplication, and ease of maintaining standardized structures in a
single place. However, for now simply fixup the definition in ibmvfc for
backporting to distros on older kernels. Wiring up with libfc will be
done in a followup patch.

Reported-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agomedia: cxusb, dib0700: ignore XC2028_I2C_FLUSH
Mauro Carvalho Chehab [Wed, 24 Jan 2018 11:01:57 +0000 (06:01 -0500)]
media: cxusb, dib0700: ignore XC2028_I2C_FLUSH

commit 9893b905e743ded332575ca04486bd586c0772f7 upstream.

The XC2028_I2C_FLUSH only needs to be implemented on a few
devices. Others can safely ignore it.

That prevents filling the dmesg with lots of messages like:

dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0

Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback")
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[bwh: Backported to 3.2: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agojffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
Jake Daryll Obina [Thu, 21 Sep 2017 16:00:14 +0000 (00:00 +0800)]
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path

commit 5bdd0c6f89fba430e18d636493398389dadc3b17 upstream.

If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode()
can get called twice in the error handling path, the first call in
jffs2_iget() itself and the second through iget_failed(). This can result
to a use-after-free error in the second jffs2_do_clear_inode() call, such
as shown by the oops below wherein the second jffs2_do_clear_inode() call
was trying to free node fragments that were already freed in the first
jffs2_do_clear_inode() call.

[   78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c
[   78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b
[   78.185871] pgd = ffffffc03a567000
[   78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000
[   78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
[   78.513147] PC is at rb_first_postorder+0xc/0x28
[   78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2]
[   78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105
[   78.526757] sp : ffffff800cea38f0
[   78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80
[   78.532754] x27: 0000000000000000 x26: ffffff800cea3c70
[   78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d
[   78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8
[   78.544760] x21: 0000000000000000 x20: 0000000000000000
[   78.548762] x19: ffffffc037d48910 x18: ffffff800891a588
[   78.552764] x17: 0000000000000800 x16: 0000000000000c00
[   78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f
[   78.560767] x13: 6461657220726f66 x12: 2064656c69616620
[   78.564769] x11: 435243203a6c616e x10: 7265746e695f6564
[   78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038
[   78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
[   78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000
[   78.580777] x3 : 0000000000000000 x2 : 000000403755e000
[   78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b
...
[   79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28
[   79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2]
[   79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2]
[   79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168
[   79.056835] [<ffffff8008202650>] iput+0x1c0/0x200
[   79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c
[   79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2]
[   79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2]
[   79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190
[   79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c
[   79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108
[   79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100
[   79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c
[   79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114
[   79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98
[   79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4
[   79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821)

The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since
iget_failed() will eventually call jffs2_do_clear_inode() if needed, so
just remove it.

Fixes: 5451f79f5f81 ("iget: stop JFFS2 from using iget() and read_inode()")
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2 years agoUSB: serial: pl2303: new device id for Chilitag
Greg Kroah-Hartman [Thu, 25 Jan 2018 08:48:55 +0000 (09:48 +0100)]
USB: serial: pl2303: new device id for Chilitag

commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream.

This adds a new device id for Chilitag devices to the pl2303 driver.

Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>