PowerPC's "cmp" instruction has four operands. Normally people write
"cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently
people forget, and write "cmp" with just three operands.
With older binutils this is silently accepted as if this was "cmpw",
while often "cmpd" is wanted. With newer binutils GAS will complain
about this for 64-bit code. For 32-bit code it still silently assumes
"cmpw" is what is meant.
In this instance the code comes directly from ISA v2.07, including the
cmp, but cmpd is correct. Backport to stable so that new toolchains can
build old kernels.
Fixes: 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode") Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If UBIFS is facing an error while walking a directory, it reports this
error and ubifs_readdir() returns the error code. But the VFS readdir
logic does not make the getdents system call fail in all cases. When the
readdir cursor indicates that more entries are present, the system call
will just return and the libc wrapper will try again since it also
knows that more entries are present.
This causes the libc wrapper to busy loop for ever when a directory is
corrupted on UBIFS.
A common approach do deal with corrupted directory entries is
skipping them by setting the cursor to the next entry. On UBIFS this
approach is not possible since we cannot compute the next directory
entry cursor position without reading the current entry. So all we can
do is setting the cursor to the "no more entries" position and make
getdents exit.
Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.
With this patch the touchpad is detected:
$ dmesg | grep -E "(i8042|Elantech|elantech)"
[ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.680372] i8042: Attempting to reset device connected to KBD port
[ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
Signed-off-by: Patrick Scheuring <patrick.scheuring.dev@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When isofs_mount() is called to mount a device read-write, it returns
EACCES even before it checks that the device actually contains an isofs
filesystem. This may confuse mount(8) which then tries to mount all
subsequent filesystem types in read-only mode.
Fix the problem by returning EACCES only once we verify that the device
indeed contains an iso9660 filesystem.
Fixes: 17b7f7cf58926844e1dd40f5eb5348d481deca6a Reported-by: Kent Overstreet <kent.overstreet@gmail.com> Reported-by: Karel Zak <kzak@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
We accidentally overwrite the original saved value of "flags" so that we
can't re-enable IRQs at the end of the function. Presumably this
function is mostly called with IRQs disabled or it would be obvious in
testing.
Fixes: aceeffbb59bb ("zfcp: trace full payload of all SAN records (req,resp,iels)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In mac80211, multicast A-MSDUs are accepted in many cases that
they shouldn't be accepted in:
* drop A-MSDUs with a multicast A1 (RA), as required by the
spec in 9.11 (802.11-2012 version)
* drop A-MSDUs with a 4-addr header, since the fourth address
can't actually be useful for them; unless 4-address frame
format is actually requested, even though the fourth address
is still not useful in this case, but ignored
Accepting the first case, in particular, is very problematic
since it allows anyone else with possession of a GTK to send
unicast frames encapsulated in a multicast A-MSDU, even when
the AP has client isolation enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch fixes one use-after-free report[1] by KASAN.
In __scsi_scan_target(), when a type 31 device is probed,
SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned
again.
Inside the following scsi_report_lun_scan(), one new scsi_device
instance is allocated, and scsi_probe_and_add_lun() is called again to
probe the target and still see type 31 device, finally
__scsi_remove_device() is called to remove & free the device at the end
of scsi_probe_and_add_lun(), so cause use-after-free in
scsi_report_lun_scan().
And the following SCSI log can be observed:
scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36
scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0
scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added
scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0)
scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0
scsi 0:0:2:0: scsi scan: REPORT LUN scan
scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36
scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0
scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added
BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104
This patch fixes the issue by moving the putting reference at
the end of scsi_report_lun_scan().
Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Debugging a data corruption issue with virtio-net/vhost-net led to
the observation that __copy_tofrom_user was occasionally returning
a value 16 larger than it should. Since the return value from
__copy_tofrom_user is the number of bytes not copied, this means
that __copy_tofrom_user can occasionally return a value larger
than the number of bytes it was asked to copy. In turn this can
cause higher-level copy functions such as copy_page_to_iter_iovec
to corrupt memory by copying data into the wrong memory locations.
It turns out that the failing case involves a fault on the store
at label 79, and at that point the first unmodified byte of the
destination is at R3 + 16. Consequently the exception handler
for that store needs to add 16 to R3 before using it to work out
how many bytes were not copied, but in this one case it was not
adding the offset to R3. To fix it, this moves the label 179 to
the point where we add 16 to R3. I have checked manually all the
exception handlers for the loads and stores in this code and the
rest of them are correct (it would be excellent to have an
automated test of all the exception cases).
This bug has been present since this code was initially
committed in May 2002 to Linux version 2.5.20.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The cipher block size for GCM is 16 bytes, and thus the CTR transform
used in crypto_gcm_setkey() will also expect a 16-byte IV. However,
the code currently reserves only 8 bytes for the IV, causing
an out-of-bounds access in the CTR transform. This patch fixes
the issue by setting the size of the IV buffer to 16 bytes.
Fixes: 84c911523020 ("[CRYPTO] gcm: Add support for async ciphers") Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fuse allowed VFS to set mode in setattr in order to clear suid/sgid on
chown and truncate, and (since writeback_cache) write. The problem with
this is that it'll potentially restore a stale mode.
The poper fix would be to let the filesystems do the suid/sgid clearing on
the relevant operations. Possibly some are already doing it but there's no
way we can detect this.
So fix this by refreshing and recalculating the mode. Do this only if
ATTR_KILL_S[UG]ID is set to not destroy performance for writes. This is
still racy but the size of the window is reduced.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Without "default_permissions" the userspace filesystem's lookup operation
needs to perform the check for search permission on the directory.
If directory does not allow search for everyone (this is quite rare) then
userspace filesystem has to set entry timeout to zero to make sure
permissions are always performed.
Changing the mode bits of the directory should also invalidate the
(previously cached) dentry to make sure the next lookup will have a chance
of updating the timeout, if needed.
Reported-by: Jean-Pierre André <jean-pierre.andre@wanadoo.fr> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.2:
- Adjust context
- Open-code d_is_dir()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
con3270 contains an optimisation that reduces the amount of data to be
transmitted to the 3270 terminal by putting a Repeat to Address (RA)
order into the data stream. The RA order itself takes up space, so
con3270 only uses it if there's enough space left in the line
buffer. Otherwise it just pads out the line manually.
For lines that were _just_ short enough that the RA order still fit in
the line buffer, the line was instead padded with an insufficient
amount of spaces. This was caused by examining the size of the
allocated line buffer rather than the length of the string to be
displayed.
For con3270_cline_end(), we just compare against the line length. For
con3270_update_string() however that isn't available anymore, so we
check whether the Repeat to Address order is present.
Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
con3270 contains an optimisation that reduces the amount of data to be
transmitted to the 3270 terminal by putting a Repeat to Address (RA)
order into the data stream. The RA order itself takes up space, so
con3270 only uses it if there's enough space left in the line
buffer. Otherwise it just pads out the line manually.
For lines too long to include the RA order, one byte was left
uninitialised. This was caused by an off-by-one bug in the loop that
pads out the line. Since the buffer is allocated from a common pool,
the single byte left uninitialised contained some previous buffer
content. Usually this was just a space or some character (which can
result in clutter but is otherwise harmless). Sometimes, however, it
was a Repeat to Address order, messing up the entire screen layout and
causing the display to send the entire buffer content on every
keystroke.
Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Reported-by: Liu Jing <liujbjl@linux.vnet.ibm.com> Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.
A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:
The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.
I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.
Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If the file permissions change on the server, then we may not be able to
recover open state. If so, we need to ensure that we mark the file
descriptor appropriately.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
CMD23 aka SET_BLOCK_COUNT was introduced with MMC v3.1.
Older versions of the specification allowed to terminate
multi-block transfers only with CMD12.
The patch fixes the following problem:
mmc0: new MMC card at address 0001
mmcblk0: mmc0:0001 SDMB-16 15.3 MiB
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
...
blk_update_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: unable to read partition table
Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
http://www.ti.com/lit/pdf/SWCZ010:
DCDC o/p voltage can go higher than programmed value
Impact:
VDDI, VDD2, and VIO output programmed voltage level can go higher than
expected or crash, when coming out of PFM to PWM mode or using DVFS.
Description:
When DCDC CLK SYNC bits are 11/01:
* VIO 3-MHz oscillator is the source clock of the digital core and input
clock of VDD1 and VDD2
* Turn-on of VDD1 and VDD2 HSD PFETis synchronized or at a constant
phase shift
* Current pulled though VCC1+VCC2 is Iload(VDD1) + Iload(VDD2)
* The 3 HSD PFET will be turned-on at the same time, causing the highest
possible switching noise on the application. This noise level depends
on the layout, the VBAT level, and the load current. The noise level
increases with improper layout.
When DCDC CLK SYNC bits are 00:
* VIO 3-MHz oscillator is the source clock of digital core
* VDD1 and VDD2 are running on their own 3-MHz oscillator
* Current pulled though VCC1+VCC2 average of Iload(VDD1) + Iload(VDD2)
* The switching noise of the 3 SMPS will be randomly spread over time,
causing lower overall switching noise.
Workaround:
Set DCDCCTRL_REG[1:0]= 00.
Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Mark Brown <broonie@kernel.org>
[bwh: Backported to 3.2: use tps65910_clear_bits()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).
However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.
This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.
Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.
Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: David W <regulars@d-dub.org.uk> Tested-by: David W <regulars@d-dub.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: keep using dev_info()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When switching from polling-based fw commands to event-based fw
commands, there is a race condition which could cause a fw command
in another task to hang: that task will keep waiting for the polling
sempahore, but may never be able to acquire it. This is due to
mlx4_cmd_use_events, which "down"s the sempahore back to 0.
During driver initialization, this is not a problem, since no other
tasks which invoke FW commands are active.
However, there is a problem if the driver switches to polling mode
and then back to event mode during normal operation.
The "test_interrupts" feature does exactly that.
Running "ethtool -t <eth device> offline" causes the PF driver to
temporarily switch to polling mode, and then back to event mode.
(Note that for VF drivers, such switching is not performed).
Fix this by adding a read-write semaphore for protection when
switching between modes.
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.
The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.
This bug has existed since 2003. Patch tested by emulated device.
Reported-by: James Patrick-Evans <james@jmp-e.com> Tested-by: James Patrick-Evans <james@jmp-e.com> Signed-off-by: James Patrick-Evans <james@jmp-e.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: keep using err()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024
It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.
When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.
Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .
Fixes: fa2b4e54d41f ("powerpc/nvram: Improve partition removal") Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If a VFC port gets unmapped in the VIOS, it may not respond with a CRQ
init complete following H_REG_CRQ. If this occurs, we can end up having
called scsi_block_requests and not a resulting unblock until the init
complete happens, which may never occur, and we end up hanging I/O
requests. This patch ensures the host action stay set to
IBMVFC_HOST_ACTION_TGT_DEL so we move all rports into devloss state and
unblock unless we receive an init complete.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Once a chunk is enqueued successfully, sctp queues can take care of it.
Even if it is failed to transmit (like because of nomem), it should be
put into retransmit queue.
If sctp report this error to users, it confuses them, they may resend
that msg, but actually in kernel sctp stack is in charge of retransmit
it already.
Besides, this error probably is not from the failure of transmitting
current msg, but transmitting or retransmitting another msg's chunks,
as sctp_outq_flush just tries to send out all transports' chunks.
This patch is to make sctp_cmd_send_msg return avoid, and not return the
transmit err back to sctp_sendmsg
Fixes: 8b570dc9f7b6 ("sctp: only drop the reference on the datamsg after sending a msg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: no gfp flags parameter] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.
Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mike Galbraith <mgalbraith@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Now, ext4_do_update_inode() clears high 16-bit fields of uid/gid
of deleted and evicted inode to fix up interoperability with old
kernels. However, it checks only i_dtime of an inode to determine
whether the inode was deleted and evicted, and this is very risky,
because i_dtime can be used for the pointer maintaining orphan inode
list, too. We need to further check whether the i_dtime is being
used for the orphan inode list even if the i_dtime is not NULL.
We found that high 16-bit fields of uid/gid of inode are unintentionally
and permanently cleared when the inode truncation is just triggered,
but not finished, and the inode metadata, whose high uid/gid bits are
cleared, is written on disk, and the sudden power-off follows that
in order.
The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.
However, the zigzag loop is too fast to let it sync.
As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Some RTL8821AE devices sold in Great Britain have the country code of
0x25 encoded in their EEPROM. This value is not tested in the routine
that establishes the regulatory info for the chip. The fix is to set
this code to have the same capabilities as the EU countries. In addition,
the channels allowed for COUNTRY_CODE_ETSI were more properly suited
for China and Israel, not the EU. This problem has also been fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Driver rtlwifi maintains its own regulatory information, The Chrome Autotest
(https://www.chromium.org/chromium-os/testing/autotest-user-doc)
showed some errors. This patch adds the necessary information for rtlwifi.
Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In case nf_conntrack_tuple_taken did not find a conflicting entry
check that all entries in this hash slot were tested and restart
in case an entry was moved to another chain.
Reported-by: Eric Dumazet <edumazet@google.com> Fixes: ea781f197d6a ("netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2:
- Adjust context
- Use NF_CT_STAT_INC(), not the _ATOMIC variant, since we disable BHs] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This was lost with commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
but is necessary for problem determination, e.g. to see the
currently active zone set during automatic port scan.
For the large GPN_FT response (4 pages), save space by not dumping
any empty residual entries.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
started to add FC_CT_HDR_LEN which made zfcp dump random data
out of bounds for RSPN GS responses because u.rspn.rsp
is the largest and last field in the union of struct zfcp_fc_req.
Other request/response types only happened to stay within bounds
due to the padding of the union or
due to the trace capping of u.gspn.rsp to ZFCP_DBF_SAN_MAX_PAYLOAD.
Timestamp : ...
Area : SAN
Subarea : 00
Level : 1
Exception : -
CPU id : ..
Caller : ...
Record id : 2
Tag : fsscth2
Request id : 0x...
Destination ID : 0x00fffffc
Payload short : 01000000fc0200008002000000000000
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx <=== 00000000000000000000000000000000
Payload length : 32 <===
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
With commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
we lost the N_Port-ID where an ELS response comes from.
With commit 7c7dc196814b9e1d5cc254dc579a5fa78ae524f7
("[SCSI] zfcp: Simplify handling of ct and els requests")
we lost the N_Port-ID where a CT response comes from.
It's especially useful if the request SAN trace record
with D_ID was already lost due to trace buffer wrap.
GS uses an open WKA port handle and ELS just a D_ID, and
only for ELS we could get D_ID from QTCB bottom via zfcp_fsf_req.
To cover both cases, add a new field to zfcp_fsf_ct_els
and fill it in on request to use in SAN response trace.
Strictly speaking the D_ID on SAN response is the FC frame's S_ID.
We don't need a field for the other end which is always us.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") Fixes: 7c7dc196814b ("[SCSI] zfcp: Simplify handling of ct and els requests") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This information was lost with
commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
but is required to debug e.g. invalid handle situations.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Since commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
HBA records no longer contain WWPN, D_ID, or LUN
to reduce duplicate information which is already in REC records.
In contrast to "regular" target ports, we don't use recovery to open
WKA ports such as directory/nameserver, so we don't get REC records.
Therefore, introduce pseudo REC running records without any
actual recovery action but including D_ID of WKA port on open/close.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
While retaining the actual filtering according to trace level,
the following commits started to write such filtered records
with a hardcoded record level of 1 instead of the actual record level:
commit 250a1352b95e1db3216e5c5d4f4365bea5122f4a
("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Now we can distinguish written records again for offline level filtering.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 250a1352b95e ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.") Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
On a successful end of reopen port forced,
zfcp_erp_strategy_followup_success() re-uses the port erp_action
and the subsequent zfcp_erp_action_cleanup() now
sees ZFCP_ERP_SUCCEEDED with
erp_action->action==ZFCP_ERP_ACTION_REOPEN_PORT
instead of ZFCP_ERP_ACTION_REOPEN_PORT_FORCED
but must not perform zfcp_scsi_schedule_rport_register().
We can detect this because the fresh port reopen erp_action
is in its very first step ZFCP_ERP_STEP_UNINITIALIZED.
Otherwise this opens a time window with unblocked rport
(until the followup port reopen recovery would block it again).
If a scsi_cmnd timeout occurs during this time window
fc_timed_out() cannot work as desired and such command
would indeed time out and trigger scsi_eh. This prevents
a clean and timely path failover.
This should not happen if the path issue can be recovered
on FC transport layer such as path issues involving RSCNs.
Also, unnecessary and repeated DID_IMM_RETRY for pending and
undesired new requests occur because internally zfcp still
has its zfcp_port blocked.
As follow-on errors with scsi_eh, it can cause,
in the worst case, permanently lost paths due to one of:
sd <scsidev>: [<scsidisk>] Medium access timeout failure. Offlining disk!
sd <scsidev>: Device offlined - not ready after error recovery
For fix validation and to aid future debugging with other recoveries
we now also trace (un)blocking of rports.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 5767620c383a ("[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED") Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI") Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable") Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In the hardware data router case, introduced with kernel 3.2
commit 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router")
the ELS/GS request&response length needs to be initialized
as in the chained SBAL case.
Otherwise, the FCP channel rejects ELS requests with
FSF_REQUEST_SIZE_TOO_LARGE.
Such ELS requests can be issued by user space through BSG / HBA API,
or zfcp itself uses ADISC ELS for remote port link test on RSCN.
The latter can cause a short path outage due to
unnecessary remote target port recovery because the always
failing ADISC cannot detect extremely short path interruptions
beyond the local FCP channel.
Below example is decoded with zfcpdbf from s390-tools:
Timestamp : ...
Area : SAN
Subarea : 00
Level : 1
Exception : -
CPU id : ..
Caller : zfcp_dbf_san_req+0408
Record id : 1
Tag : fssels1
Request id : 0x<reqid>
Destination ID : 0x00<target d_id>
Payload info : 5200000000000000 <our wwpn > [ADISC]
<our wwnn > 00<s_id> 00000000 00000000000000000000000000000000
Timestamp : ...
Area : HBA
Subarea : 00
Level : 1
Exception : -
CPU id : ..
Caller : zfcp_dbf_hba_fsf_res+0740
Record id : 1
Tag : fs_ferr
Request id : 0x<reqid>
Request status : 0x00000010
FSF cmnd : 0x0000000b [FSF_QTCB_SEND_ELS]
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000061 [FSF_REQUEST_SIZE_TOO_LARGE]
FSF stat qual : 00000000000000000000000000000000
Prot stat : 0x00000100
Prot stat qual : 00000000000000000000000000000000
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
For an NPIV-enabled FCP device, zfcp can erroneously show
"NPort (fabric via point-to-point)" instead of "NPIV VPORT"
for the port_type sysfs attribute of the corresponding
fc_host.
s390-tools that can be affected are dbginfo.sh and ziomon.
zfcp_fsf_exchange_config_evaluate() ignores
fsf_qtcb_bottom_config.connection_features indicating NPIV
and only sets fc_host_port_type to FC_PORTTYPE_NPORT if
fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC.
Only the independent zfcp_fsf_exchange_port_evaluate()
evaluates connection_features to overwrite fc_host_port_type
to FC_PORTTYPE_NPIV in case of NPIV.
Code was introduced with upstream kernel 2.6.30
commit 0282985da5923fa6365adcc1a1586ae0c13c1617
("[SCSI] zfcp: Report fc_host_port_type as NPIV").
This works during FCP device recovery (such as set online)
because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by
FSF_QTCB_EXCHANGE_PORT_DATA in sequence.
However, the zfcp-specific scsi host sysfs attributes
"requests", "megabytes", or "seconds_active" trigger only
zfcp_fsf_exchange_config_evaluate() resetting fc_host
port_type to FC_PORTTYPE_NPORT despite NPIV.
The zfcp-specific scsi host sysfs attribute "utilization"
triggers only zfcp_fsf_exchange_port_evaluate() correcting
the fc_host port_type again in case of NPIV.
Evaluate fsf_qtcb_bottom_config.connection_features
in zfcp_fsf_exchange_config_evaluate() where it belongs to.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 0282985da592 ("[SCSI] zfcp: Report fc_host_port_type as NPIV") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When using efifb with a 16-bit (5:6:5) visual, fbcon's text is rendered
in the wrong colors - e.g. text gray (#aaaaaa) is rendered as green
(#50bc50) and neighboring pixels have slightly different values
(such as #50bc78).
The reason is that fbcon loads its 16 color palette through
efifb_setcolreg(), which in turn calculates a 32-bit value to write
into memory for each palette index.
Until now, this code could only handle 8-bit visuals and didn't mask
overlapping values when ORing them.
With this patch, fbcon displays the correct colors when a qemu VM is
booted in 16-bit mode (in GRUB: "set gfxpayload=800x600x16").
Fixes: 7c83172b98e5 ("x86_64 EFI boot support: EFI frame buffer driver") # v2.6.24+ Signed-off-by: Max Staudt <mstaudt@suse.de> Acked-By: Peter Jones <pjones@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This is an fsfuzzer bug. ->s_journal is set at the end of
ext3_load_journal() but we try to use it in the error handling from
ext3_get_journal() while it's still NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This should really only be done for XS_TRANSACTION_END messages, or
else at least some of the xenstore-* tools don't work anymore.
Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition") Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ed Swierk <eswierk@skyportsystems.com>
[bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Inability to locate a user mode specified transaction ID should not
lead to a kernel crash. For other than XS_TRANSACTION_START also
don't issue anything to xenbus if the specified ID doesn't match that
of any active transaction.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ed Swierk <eswierk@skyportsystems.com>
[bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Commit 588afcc1c0e4 ("[media] usbvision fix overflow of interfaces
array")' should be reverted, because:
* "!dev->actconfig->interface[ifnum]" won't catch a case where the value
is not NULL but some garbage. This way the system may crash later with
GPF.
* "(ifnum >= USB_MAXINTERFACES)" does not cover all the error
conditions. "ifnum" should be compared to "dev->actconfig->
desc.bNumInterfaces", i.e. compared to the number of "struct
usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES.
* There is a "struct usb_device" leak in this error path, as there is
usb_get_dev(), but no usb_put_dev() on this path.
* There is a bug of the same type several lines below with number of
endpoints. The code is accessing hard-coded second endpoint
("interface->endpoint[1].desc") which may not exist. It would be great
to handle this in the same patch too.
* All the concerns above are resolved by already-accepted commit fa52bd50
("[media] usbvision: fix crash on detecting device with invalid
configuration")
* Mailing list message:
http://www.spinics.net/lists/linux-media/msg94832.html
Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Luis Henriques <luis.henriques@canonical.com>
[bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2). Fix that.
References: CVE-2016-7097 Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[bwh: Backported to 3.2:
- Drop changes to ceph, f2fs, hfsplus, orangefs
- Use capable() instead of capable_wrt_inode_uidgid()
- Update ext3 and generic_acl.c as well
- In gfs2, jfs, and xfs, take care to avoid leaking the allocated ACL if
posix_acl_update_mode() determines it's not needed
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently, notify_change() clears capabilities or IMA attributes by
calling security_inode_killpriv() before calling into ->setattr. Thus it
happens before any other permission checks in inode_change_ok() and user
is thus allowed to trigger clearing of capabilities or IMA attributes
for any file he can look up e.g. by calling chown for that file. This is
unexpected and can lead to user DoSing a system.
Fix the problem by calling security_inode_killpriv() at the end of
inode_change_ok() instead of from notify_change(). At that moment we are
sure user has permissions to do the requested change.
References: CVE-2015-1350 Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.2:
- Drop changes to f2fs, lustre, orangefs, overlayfs
- Adjust filenames, context
- In nfsd, pass dentry to nfsd_sanitize_attrs()
- In xfs, pass dentry to xfs_change_file_space(), xfs_set_mode(),
xfs_setattr_nonsize(), and xfs_setattr_size()
- Update ext3 as well
- Mark pohmelfs as BROKEN; it's long dead upstream] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The IP-over-1394 driver firewire-net lacked input validation when
handling incoming fragmented datagrams. A maliciously formed fragment
with a respectively large datagram_offset would cause a memcpy past the
datagram buffer.
So, drop any packets carrying a fragment with offset + length larger
than datagram_size.
In addition, ensure that
- GASP header, unfragmented encapsulation header, or fragment
encapsulation header actually exists before we access it,
- the encapsulated datagram or fragment is of nonzero size.
Reported-by: Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by: Eyal Itkin <eyal.itkin@gmail.com> Fixes: CVE 2016-8633 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
[bwh: Backported to 3.2: fwnet_receive_broadcast() never matches IPv6 packets] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
We need to put an upper bound on "user_len" so the memcpy() doesn't
overflow.
Reported-by: Marco Grassi <marco.gra@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2:
- Adjust context
- Use literal 1032 insetad of ARCMSR_API_DATA_BUFLEN] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fix a short sprintf buffer in proc_keys_show(). If the gcc stack protector
is turned on, this can cause a panic due to stack corruption.
The problem is that xbuf[] is not big enough to hold a 64-bit timeout
rendered as weeks:
(gdb) p 0xffffffffffffffffULL/(60*60*24*7)
$2 = 30500568904943
That's 14 chars plus NUL, not 11 chars plus NUL.
Expand the buffer to 16 chars.
I think the unpatched code apparently works if the stack-protector is not
enabled because on a 32-bit machine the buffer won't be overflowed and on a
64-bit machine there's a 64-bit aligned pointer at one side and an int that
isn't checked again on the other side.
Reported-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The oom victim cannot terminate because it needs to take mmap_sem for
write while the lock is held by ksmd for read which loops in the page
allocator
ksm_do_scan
scan_get_next_rmap_item
down_read
get_next_rmap_item
alloc_rmap_item #ksmd will loop permanently.
There is no way forward because the oom victim cannot release any memory
in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve
this problem because it would release the memory asynchronously.
Nevertheless we can relax alloc_rmap_item requirements and use
__GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan
would just retry later after the lock got dropped.
Such a patch would be also easy to backport to older stable kernels which
do not have oom_reaper.
While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed
by the allocation failure.
Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Suggested-by: Hugh Dickins <hughd@google.com> Suggested-by: Michal Hocko <mhocko@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid
instead of the previous dst_pid which was copied from in_skb's portid.
Since the skb is new the portid is 0 at that point so the packets are sent
to the kernel and we get scheduling while atomic or a deadlock (depending
on where it happens) by trying to acquire rtnl two times.
Also since this is RTM_GETROUTE, it can be triggered by a normal user.
Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2:
- Use 'pid' instead of 'portid' where necessary
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The iter->seq can be reset outside the protection of the mutex. So can
reading of user data. Move the mutex up to the beginning of the function.
Fixes: d7350c3f45694 ("tracing/core: make the read callbacks reentrants") Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
A timer was used to restart after the bus-off state, leading to a
relatively large can_restart() executed in an interrupt context,
which in turn sets up pinctrl. When this happens during system boot,
there is a high probability of grabbing the pinctrl_list_mutex,
which is locked already by the probe() of other device, making the
kernel suspect a deadlock condition [1].
To resolve this issue, the restart_timer is replaced by a delayed
work.
Signed-off-by: Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If the subvol/snapshot create/destroy ioctls are passed a regular file
with execute permissions set, we'll eventually Oops while trying to do
inode->i_op->lookup via lookup_one_len.
This patch ensures that the file descriptor refers to a directory.
Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl) Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
[bwh: Backported to 3.2:
- Open-code file_inode()
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.
there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.
At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.
Signed-off-by: Yadi.hu <yadi.hu@windriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reported-by: Saar Maoz <saar.maoz@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Commit ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery")
checks if lockres master has changed to identify whether new master has
finished recovery or not. This will introduce a race that right after
old master does umount ( means master will change), a new convert
request comes.
In this case, it will reset lockres state to DLM_RECOVERING and then
retry convert, and then fail with lockres->l_action being set to
OCFS2_AST_INVALID, which will cause inconsistent lock level between
ocfs2 and dlm, and then finally BUG.
Since dlm recovery will clear lock->convert_pending in
dlm_move_lockres_to_recovery_list, we can use it to correctly identify
the race case between convert and recovery. So fix it.
Fixes: ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms")
introduced aead. The function attach_aead kmemdup()s the algorithm
name during xfrm_state_construct().
However this memory is never freed.
Implementation has since been slightly modified in
commit ee5c23176fcc ("xfrm: Clone states properly on migration")
without resolving this leak.
This patch adds a kfree() call for the aead algorithm name.
Fixes: 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Acked-by: Rami Rosen <roszenrami@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Since commit acb2505d0119 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.
Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d0119 ("openrisc: fix copy_from_user()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
arch/avr32/kernel/built-in.o: In function `arch_ptrace':
(.text+0x650): undefined reference to `___copy_from_user'
arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined
reference to `___copy_from_user'
kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax':
(.text+0x5dd8): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin':
sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `ptrace_has_cap':
ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user'
kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to
`___copy_from_user' follow
skb is not freed if newsk is NULL. Rework the error path so free_skb is
unconditionally called on function exit.
Fixes: c3ea9fa27413 ("[IrDA] af_irda: IRDA_ASSERT cleanups") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.
The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.
Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before. However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.
Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid. It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below. To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler. Left that way,
zeroing added in inline wrapper.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
should clear on access_ok() failures. Also remove the useless
range truncation logics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: no calls to check_object_size()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
... that should zero on faults. Also remove the <censored> helpful
logics wrt range truncation copied from ppc32. Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: include <linux/string.h> to get declaration of memset()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: no calls to check_object_size()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When we need to allocate a temporary blkcipher_walk_next and it
fails, the code is supposed to take the slow path of processing
the data block by block. However, due to an unrelated change
we instead end up dereferencing the NULL pointer.
This patch fixes it by moving the unrelated bsize setting out
of the way so that we enter the slow path as inteded.
Fixes: 7607bd8ff03b ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Reported-by: xiakaixu <xiakaixu@huawei.com> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[bwh: Backported to 3.2: s/walk_blocksize/blocksize/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for
the PCMCIA socket class. PCMCIA used to handle suspend/resume via the
socket hosting device, which happened at normal device suspend/resume
time.
However, the referenced commit changed this: much of the resume now
happens much earlier, in the noirq resume handler of dev_pm_ops.
However, on SA1111, the PCMCIA device is not accessible as the SA1111
has not been resumed at _noirq time. It's slightly worse than that,
because the SA1111 has already been put to sleep at _noirq time, so
suspend doesn't work properly.
Fix this by converting the core SA1111 code to use dev_pm_ops as well,
and performing its own suspend/resume at noirq time.
This fixes these errors in the kernel log:
pcmcia_socket pcmcia_socket0: time out after reset
pcmcia_socket pcmcia_socket1: time out after reset
and the resulting lack of PCMCIA cards after a S2RAM cycle.
Fixes: d7646f7632549 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Ensure that we conform to the algorithm described in RFC5661, section
18.36.4 for when to bump the sequence id. In essence we do it for all
cases except when the RPC call timed out, or in case of the server returning
NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[bwh: Backported to 3.2:
- Add the 'out' label
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
projects / pandora-kernel.git / log