pandora-kernel.git
4 years agonet: ep93xx_eth: Do not crash unloading module
Florian Fainelli [Mon, 5 Dec 2016 03:22:05 +0000 (19:22 -0800)]
net: ep93xx_eth: Do not crash unloading module

commit c823abac17926767fb50175e098f087a6ac684c3 upstream.

When we unload the ep93xx_eth, whether we have opened the network
interface or not, we will either hit a kernel paging request error, or a
simple NULL pointer de-reference because:

- if ep93xx_open has been called, we have created a valid DMA mapping
  for ep->descs, when we call ep93xx_stop, we also call
  ep93xx_free_buffers, ep->descs now has a stale value

- if ep93xx_open has not been called, we have a NULL pointer for
  ep->descs, so performing any operation against that address just won't
  work

Fix this by adding a NULL pointer check for ep->descs which means that
ep93xx_free_buffers() was able to successfully tear down the descriptors
and free the DMA cookie as well.

Fixes: 1d22e05df818 ("[PATCH] Cirrus Logic ep93xx ethernet driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agonet: ping: check minimum size on ICMP header length
Kees Cook [Mon, 5 Dec 2016 18:34:38 +0000 (10:34 -0800)]
net: ping: check minimum size on ICMP header length

commit 0eab121ef8750a5c8637d51534d5e9143fb0633f upstream.

Prior to commit c0371da6047a ("put iov_iter into msghdr") in v3.19, there
was no check that the iovec contained enough bytes for an ICMP header,
and the read loop would walk across neighboring stack contents. Since the
iov_iter conversion, bad arguments are noticed, but the returned error is
EFAULT. Returning EINVAL is a clearer error and also solves the problem
prior to v3.19.

This was found using trinity with KASAN on v3.18:

BUG: KASAN: stack-out-of-bounds in memcpy_fromiovec+0x60/0x114 at addr ffffffc071077da0
Read of size 8 by task trinity-c2/9623
page:ffffffbe034b9a08 count:0 mapcount:0 mapping:          (null) index:0x0
flags: 0x0()
page dumped because: kasan: bad access detected
CPU: 0 PID: 9623 Comm: trinity-c2 Tainted: G    BU         3.18.0-dirty #15
Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT)
Call trace:
[<ffffffc000209c98>] dump_backtrace+0x0/0x1ac arch/arm64/kernel/traps.c:90
[<ffffffc000209e54>] show_stack+0x10/0x1c arch/arm64/kernel/traps.c:171
[<     inline     >] __dump_stack lib/dump_stack.c:15
[<ffffffc000f18dc4>] dump_stack+0x7c/0xd0 lib/dump_stack.c:50
[<     inline     >] print_address_description mm/kasan/report.c:147
[<     inline     >] kasan_report_error mm/kasan/report.c:236
[<ffffffc000373dcc>] kasan_report+0x380/0x4b8 mm/kasan/report.c:259
[<     inline     >] check_memory_region mm/kasan/kasan.c:264
[<ffffffc00037352c>] __asan_load8+0x20/0x70 mm/kasan/kasan.c:507
[<ffffffc0005b9624>] memcpy_fromiovec+0x5c/0x114 lib/iovec.c:15
[<     inline     >] memcpy_from_msg include/linux/skbuff.h:2667
[<ffffffc000ddeba0>] ping_common_sendmsg+0x50/0x108 net/ipv4/ping.c:674
[<ffffffc000dded30>] ping_v4_sendmsg+0xd8/0x698 net/ipv4/ping.c:714
[<ffffffc000dc91dc>] inet_sendmsg+0xe0/0x12c net/ipv4/af_inet.c:749
[<     inline     >] __sock_sendmsg_nosec net/socket.c:624
[<     inline     >] __sock_sendmsg net/socket.c:632
[<ffffffc000cab61c>] sock_sendmsg+0x124/0x164 net/socket.c:643
[<     inline     >] SYSC_sendto net/socket.c:1797
[<ffffffc000cad270>] SyS_sendto+0x178/0x1d8 net/socket.c:1761

CVE-2016-8399

Reported-by: Qidan He <i@flanker017.me>
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: only ICMPv4 is supported]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agotipc: check minimum bearer MTU
Michal Kubeček [Fri, 2 Dec 2016 08:33:41 +0000 (09:33 +0100)]
tipc: check minimum bearer MTU

commit 3de81b758853f0b29c61e246679d20b513c4cfec upstream.

Qian Zhang (张谦) reported a potential socket buffer overflow in
tipc_msg_build() which is also known as CVE-2016-8632: due to
insufficient checks, a buffer overflow can occur if MTU is too short for
even tipc headers. As anyone can set device MTU in a user/net namespace,
this issue can be abused by a regular user.

As agreed in the discussion on Ben Hutchings' original patch, we should
check the MTU at the moment a bearer is attached rather than for each
processed packet. We also need to repeat the check when bearer MTU is
adjusted to new device MTU. UDP case also needs a check to avoid
overflow when calculating bearer MTU.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2:
 - Adjust filename, context
 - Duplicate macro definitions in bearer.h to avoid mutual inclusion
 - NETDEV_CHANGEMTU and NETDEV_CHANGEADDR cases in net notifier were combined
 - Drop changes in udp_media.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agopacket: fix race condition in packet_set_ring
Philip Pettersson [Wed, 30 Nov 2016 22:55:36 +0000 (14:55 -0800)]
packet: fix race condition in packet_set_ring

commit 84ac7260236a49c79eede91617700174c2c19b0c upstream.

When packet_set_ring creates a ring buffer it will initialize a
struct timer_list if the packet version is TPACKET_V3. This value
can then be raced by a different thread calling setsockopt to
set the version to TPACKET_V1 before packet_set_ring has finished.

This leads to a use-after-free on a function pointer in the
struct timer_list when the socket is closed as the previously
initialized timer will not be deleted.

The bug is fixed by taking lock_sock(sk) in packet_setsockopt when
changing the packet version while also taking the lock at the start
of packet_set_ring.

Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Philip Pettersson <philip.pettersson@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agolocking/rtmutex: Prevent dequeue vs. unlock race
Thomas Gleixner [Wed, 30 Nov 2016 21:04:41 +0000 (21:04 +0000)]
locking/rtmutex: Prevent dequeue vs. unlock race

commit dbb26055defd03d59f678cb5f2c992abe05b064a upstream.

David reported a futex/rtmutex state corruption. It's caused by the
following problem:

CPU0 CPU1 CPU2

l->owner=T1
rt_mutex_lock(l)
lock(l->wait_lock)
l->owner = T1 | HAS_WAITERS;
enqueue(T2)
boost()
  unlock(l->wait_lock)
schedule()

rt_mutex_lock(l)
lock(l->wait_lock)
l->owner = T1 | HAS_WAITERS;
enqueue(T3)
boost()
  unlock(l->wait_lock)
schedule()
signal(->T2) signal(->T3)
lock(l->wait_lock)
dequeue(T2)
deboost()
  unlock(l->wait_lock)
lock(l->wait_lock)
dequeue(T3)
  ===> wait list is now empty
deboost()
 unlock(l->wait_lock)
lock(l->wait_lock)
fixup_rt_mutex_waiters()
  if (wait_list_empty(l)) {
    owner = l->owner & ~HAS_WAITERS;
    l->owner = owner
     ==> l->owner = T1
  }

lock(l->wait_lock)
rt_mutex_unlock(l) fixup_rt_mutex_waiters()
  if (wait_list_empty(l)) {
    owner = l->owner & ~HAS_WAITERS;
cmpxchg(l->owner, T1, NULL)
 ===> Success (l->owner = NULL)
    l->owner = owner
     ==> l->owner = T1
  }

That means the problem is caused by fixup_rt_mutex_waiters() which does the
RMW to clear the waiters bit unconditionally when there are no waiters in
the rtmutexes rbtree.

This can be fatal: A concurrent unlock can release the rtmutex in the
fastpath because the waiters bit is not set. If the cmpxchg() gets in the
middle of the RMW operation then the previous owner, which just unlocked
the rtmutex is set as the owner again when the write takes place after the
successfull cmpxchg().

The solution is rather trivial: verify that the owner member of the rtmutex
has the waiters bit set before clearing it. This does not require a
cmpxchg() or other atomic operations because the waiters bit can only be
set and cleared with the rtmutex wait_lock held. It's also safe against the
fast path unlock attempt. The unlock attempt via cmpxchg() will either see
the bit set and take the slowpath or see the bit cleared and release it
atomically in the fastpath.

It's remarkable that the test program provided by David triggers on ARM64
and MIPS64 really quick, but it refuses to reproduce on x86-64, while the
problem exists there as well. That refusal might explain that this got not
discovered earlier despite the bug existing from day one of the rtmutex
implementation more than 10 years ago.

Thanks to David for meticulously instrumenting the code and providing the
information which allowed to decode this subtle problem.

Reported-by: David Daney <ddaney@caviumnetworks.com>
Tested-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 23f78d4a03c5 ("[PATCH] pi-futex: rt mutex core")
Link: http://lkml.kernel.org/r/20161130210030.351136722@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2:
 - Use ACCESS_ONCE() instead of {READ,WRITE}_ONCE()
 - Adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoKVM: x86: drop error recovery in em_jmp_far and em_ret_far
Radim Krčmář [Wed, 23 Nov 2016 20:15:00 +0000 (21:15 +0100)]
KVM: x86: drop error recovery in em_jmp_far and em_ret_far

commit 2117d5398c81554fbf803f5fd1dc55eb78216c0c upstream.

em_jmp_far and em_ret_far assumed that setting IP can only fail in 64
bit mode, but syzkaller proved otherwise (and SDM agrees).
Code segment was restored upon failure, but it was left uninitialized
outside of long mode, which could lead to a leak of host kernel stack.
We could have fixed that by always saving and restoring the CS, but we
take a simpler approach and just break any guest that manages to fail
as the error recovery is error-prone and modern CPUs don't need emulator
for this.

Found by syzkaller:

  WARNING: CPU: 2 PID: 3668 at arch/x86/kvm/emulate.c:2217 em_ret_far+0x428/0x480
  Kernel panic - not syncing: panic_on_warn set ...

  CPU: 2 PID: 3668 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
   [...]
  Call Trace:
   [...] __dump_stack lib/dump_stack.c:15
   [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
   [...] panic+0x1b7/0x3a3 kernel/panic.c:179
   [...] __warn+0x1c4/0x1e0 kernel/panic.c:542
   [...] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
   [...] em_ret_far+0x428/0x480 arch/x86/kvm/emulate.c:2217
   [...] em_ret_far_imm+0x17/0x70 arch/x86/kvm/emulate.c:2227
   [...] x86_emulate_insn+0x87a/0x3730 arch/x86/kvm/emulate.c:5294
   [...] x86_emulate_instruction+0x520/0x1ba0 arch/x86/kvm/x86.c:5545
   [...] emulate_instruction arch/x86/include/asm/kvm_host.h:1116
   [...] complete_emulated_io arch/x86/kvm/x86.c:6870
   [...] complete_emulated_mmio+0x4e9/0x710 arch/x86/kvm/x86.c:6934
   [...] kvm_arch_vcpu_ioctl_run+0x3b7a/0x5a90 arch/x86/kvm/x86.c:6978
   [...] kvm_vcpu_ioctl+0x61e/0xdd0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2557
   [...] vfs_ioctl fs/ioctl.c:43
   [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
   [...] SYSC_ioctl fs/ioctl.c:694
   [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
   [...] entry_SYSCALL_64_fastpath+0x1f/0xc2

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far jumps")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoext4: sanity check the block and cluster size at mount time
Theodore Ts'o [Fri, 18 Nov 2016 18:00:24 +0000 (13:00 -0500)]
ext4: sanity check the block and cluster size at mount time

commit 8cdf3372fe8368f56315e66bea9f35053c418093 upstream.

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoKVM: Disable irq while unregistering user notifier
Ignacio Alvarado [Fri, 4 Nov 2016 19:15:55 +0000 (12:15 -0700)]
KVM: Disable irq while unregistering user notifier

commit 1650b4ebc99da4c137bfbfc531be4a2405f951dd upstream.

Function user_notifier_unregister should be called only once for each
registered user notifier.

Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.

Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Fixes: 18863bdd60f8 ("KVM: x86 shared msr infrastructure")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agomwifiex: printk() overflow with 32-byte SSIDs
Brian Norris [Wed, 9 Nov 2016 02:28:24 +0000 (18:28 -0800)]
mwifiex: printk() overflow with 32-byte SSIDs

commit fcd2042e8d36cf644bd2d69c26378d17158b17df upstream.

SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length
when we print them out.

This can be easily noticed by connecting to a network with a 32-octet
SSID:

[ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to
'0123456789abcdef0123456789abcdef <uninitialized mem>' bssid
xx:xx:xx:xx:xx:xx

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoIB/mlx4: Fix create CQ error flow
Matan Barak [Thu, 10 Nov 2016 09:30:55 +0000 (11:30 +0200)]
IB/mlx4: Fix create CQ error flow

commit 593ff73bcfdc79f79a8a0df55504f75ad3e5d1a9 upstream.

Currently, if ib_copy_to_udata fails, the CQ
won't be deleted from the radix tree and the HW (HW2SW).

Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoIB/uverbs: Fix leak of XRC target QPs
Tariq Toukan [Thu, 27 Oct 2016 13:36:26 +0000 (16:36 +0300)]
IB/uverbs: Fix leak of XRC target QPs

commit 5b810a242c28e1d8d64d718cebe75b79d86a0b2d upstream.

The real QP is destroyed in case of the ref count reaches zero, but
for XRC target QPs this call was missed and caused to QP leaks.

Let's call to destroy for all flows.

Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoUSB: serial: cp210x: add ID for the Zone DPMX
Paul Jakma [Wed, 16 Nov 2016 10:13:49 +0000 (10:13 +0000)]
USB: serial: cp210x: add ID for the Zone DPMX

commit 2ab13292d7a314fa45de0acc808e41aaad31989c upstream.

The BRIM Brothers Zone DPMX is a bicycle powermeter. This ID is for the USB
serial interface in its charging dock for the control pods, via which some
settings for the pods can be modified.

Signed-off-by: Paul Jakma <paul@jakma.org>
Cc: Barry Redmond <barry@brimbrothers.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agomfd: core: Fix device reference leak in mfd_clone_cell
Johan Hovold [Tue, 1 Nov 2016 10:38:18 +0000 (11:38 +0100)]
mfd: core: Fix device reference leak in mfd_clone_cell

commit 722f191080de641f023feaa7d5648caf377844f5 upstream.

Make sure to drop the reference taken by bus_find_device_by_name()
before returning from mfd_clone_cell().

Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoFix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
Petr Vandrovec [Thu, 10 Nov 2016 21:57:14 +0000 (13:57 -0800)]
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y

commit 2ce9d2272b98743b911196c49e7af5841381c206 upstream.

Some code (all error handling) submits CDBs that are allocated
on the stack.  This breaks with CB/CBI code that tries to create
URB directly from SCSI command buffer - which happens to be in
vmalloced memory with vmalloced kernel stacks.

Let's make copy of the command in usb_stor_CB_transport.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agodib0700: fix nec repeat handling
Sean Young [Thu, 10 Nov 2016 16:44:49 +0000 (17:44 +0100)]
dib0700: fix nec repeat handling

commit ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 upstream.

When receiving a nec repeat, ensure the correct scancode is repeated
rather than a random value from the stack.  This removes the need for
the bogus uninitialized_var() and also fixes the warnings:

    drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’:
    drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function

[sean addon: So after writing the patch and submitting it, I've bought the
             hardware on ebay. Without this patch you get random scancodes
             on nec repeats, which the patch indeed fixes.]

Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Sean Young <sean@mess.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agocoredump: fix unfreezable coredumping task
Andrey Ryabinin [Thu, 10 Nov 2016 18:46:38 +0000 (10:46 -0800)]
coredump: fix unfreezable coredumping task

commit 70d78fe7c8b640b5acfad56ad341985b3810998a upstream.

It could be not possible to freeze coredumping task when it waits for
'core_state->startup' completion, because threads are frozen in
get_signal() before they got a chance to complete 'core_state->startup'.

Inability to freeze a task during suspend will cause suspend to fail.
Also CRIU uses cgroup freezer during dump operation.  So with an
unfreezable task the CRIU dump will fail because it waits for a
transition from 'FREEZING' to 'FROZEN' state which will never happen.

Use freezer_do_not_count() to tell freezer to ignore coredumping task
while it waits for core_state->startup completion.

Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoswapfile: fix memory corruption via malformed swapfile
Jann Horn [Thu, 10 Nov 2016 18:46:19 +0000 (10:46 -0800)]
swapfile: fix memory corruption via malformed swapfile

commit dd111be69114cc867f8e826284559bfbc1c40e37 upstream.

When root activates a swap partition whose header has the wrong
endianness, nr_badpages elements of badpages are swabbed before
nr_badpages has been checked, leading to a buffer overrun of up to 8GB.

This normally is not a security issue because it can only be exploited
by root (more specifically, a process with CAP_SYS_ADMIN or the ability
to modify a swap file/partition), and such a process can already e.g.
modify swapped-out memory of any other userspace process on the system.

Link: http://lkml.kernel.org/r/1477949533-2509-1-git-send-email-jann@thejh.net
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agortnl: reset calcit fptr in rtnl_unregister()
Mathias Krause [Mon, 7 Nov 2016 22:22:19 +0000 (23:22 +0100)]
rtnl: reset calcit fptr in rtnl_unregister()

commit f567e950bf51290755a2539ff2aaef4c26f735d3 upstream.

To avoid having dangling function pointers left behind, reset calcit in
rtnl_unregister(), too.

This is no issue so far, as only the rtnl core registers a netlink
handler with a calcit hook which won't be unregistered, but may become
one if new code makes use of the calcit hook.

Fixes: c7ac8679bec9 ("rtnetlink: Compute and store minimum ifinfo...")
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
Sumit Saxena [Wed, 9 Nov 2016 10:59:42 +0000 (02:59 -0800)]
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression

commit 5e5ec1759dd663a1d5a2f10930224dd009e500e8 upstream.

This patch will fix regression caused by commit 1e793f6fc0db ("scsi:
megaraid_sas: Fix data integrity failure for JBOD (passthrough)
devices").

The problem was that the MEGASAS_IS_LOGICAL macro did not have braces
and as a result the driver ended up exposing a lot of non-existing SCSI
devices (all SCSI commands to channels 1,2,3 were returned as
SUCCESS-DID_OK by driver).

[mkp: clarified patch description]

Fixes: 1e793f6fc0db920400574211c48f9157a37e3945
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Tested-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agommc: mxs: Initialize the spinlock prior to using it
Fabio Estevam [Sat, 5 Nov 2016 19:45:07 +0000 (17:45 -0200)]
mmc: mxs: Initialize the spinlock prior to using it

commit f91346e8b5f46aaf12f1df26e87140584ffd1b3f upstream.

An interrupt may occur right after devm_request_irq() is called and
prior to the spinlock initialization, leading to a kernel oops,
as the interrupt handler uses the spinlock.

In order to prevent this problem, move the spinlock initialization
prior to requesting the interrupts.

Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoUSB: serial: ftdi_sio: add support for TI CC3200 LaunchPad
Doug Brown [Sat, 5 Nov 2016 04:18:20 +0000 (21:18 -0700)]
USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

commit 9bfef729a3d11f04d12788d749a3ce6b47645734 upstream.

This patch adds support for the TI CC3200 LaunchPad board, which uses a
custom USB vendor ID and product ID. Channel A is used for JTAG, and
channel B is used for a UART.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoi2c: core: fix NULL pointer dereference under race condition
Vladimir Zapolskiy [Mon, 31 Oct 2016 19:46:24 +0000 (21:46 +0200)]
i2c: core: fix NULL pointer dereference under race condition

commit 147b36d5b70c083cc76770c47d60b347e8eaf231 upstream.

Race condition between registering an I2C device driver and
deregistering an I2C adapter device which is assumed to manage that
I2C device may lead to a NULL pointer dereference due to the
uninitialized list head of driver clients.

The root cause of the issue is that the I2C bus may know about the
registered device driver and thus it is matched by bus_for_each_drv(),
but the list of clients is not initialized and commonly it is NULL,
because I2C device drivers define struct i2c_driver as static and
clients field is expected to be initialized by I2C core:

  i2c_register_driver()             i2c_del_adapter()
    driver_register()                 ...
      bus_add_driver()                ...
        ...                           bus_for_each_drv(..., __process_removed_adapter)
      ...                               i2c_do_del_adapter()
    ...                                   list_for_each_entry_safe(..., &driver->clients, ...)
    INIT_LIST_HEAD(&driver->clients);

To solve the problem it is sufficient to do clients list head
initialization before calling driver_register().

The problem was found while using an I2C device driver with a sluggish
registration routine on a bus provided by a physically detachable I2C
master controller, but practically the oops may be reproduced under
the race between arbitraty I2C device driver registration and managing
I2C bus device removal e.g. by unbinding the latter over sysfs:

% echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind
  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  Internal error: Oops: 17 [#1] SMP ARM
  CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  task: e5ada400 task.stack: e4936000
  PC is at i2c_do_del_adapter+0x20/0xcc
  LR is at __process_removed_adapter+0x14/0x1c
  Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: 35bd004a  DAC: 00000051
  Process sh (pid: 533, stack limit = 0xe4936210)
  Stack: (0xe4937d28 to 0xe4938000)
  Backtrace:
  [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c)
  [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0)
  [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284)
  [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx])
  [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44)
  [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c)
  [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34)
  [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104)
  [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34)
  [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54)
  [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214)
  [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120)
  [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170)
  [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8)
  [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c)

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped
Eric Dumazet [Thu, 3 Nov 2016 15:59:46 +0000 (08:59 -0700)]
ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped

commit 990ff4d84408fc55942ca6644f67e361737b3d8e upstream.

While fuzzing kernel with syzkaller, Andrey reported a nasty crash
in inet6_bind() caused by DCCP lacking a required method.

Fixes: ab1e0a13d7029 ("[SOCK] proto: Add hashinfo member to struct proto")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoHID: usbhid: add ATEN CS962 to list of quirky devices
Oliver Neukum [Thu, 3 Nov 2016 11:31:41 +0000 (12:31 +0100)]
HID: usbhid: add ATEN CS962 to list of quirky devices

commit cf0ea4da4c7df11f7a508b2f37518e0f117f3791 upstream.

Like many similar devices it needs a quirk to work.
Issuing the request gets the device into an irrecoverable state.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoHID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switch
Laura Abbott [Tue, 12 May 2015 17:00:00 +0000 (10:00 -0700)]
HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switch

commit 849eca7b9dae0364e2fbe8afdf0fb610d12c9c8f upstream.

Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing
errors:

[791759.606542] usb 1-5.4: input irq status -75 received
[791759.614537] usb 1-5.4: input irq status -75 received
[791759.622542] usb 1-5.4: input irq status -75 received

Add it.

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agofirewire: net: fix fragmented datagram_size off-by-one
Stefan Richter [Sun, 30 Oct 2016 16:32:01 +0000 (17:32 +0100)]
firewire: net: fix fragmented datagram_size off-by-one

commit e9300a4b7bbae83af1f7703938c94cf6dc6d308f upstream.

RFC 2734 defines the datagram_size field in fragment encapsulation
headers thus:

    datagram_size:  The encoded size of the entire IP datagram.  The
    value of datagram_size [...] SHALL be one less than the value of
    Total Length in the datagram's IP header (see STD 5, RFC 791).

Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got
this field with a -/+1 offset:

    ether1394_tx() /* transmit */
        ether1394_encapsulate_prep()
            hdr->ff.dg_size = dg_size - 1;

    ether1394_data_handler() /* receive */
        if (hdr->common.lf == ETH1394_HDR_LF_FF)
            dg_size = hdr->ff.dg_size + 1;
        else
            dg_size = hdr->sf.dg_size + 1;

Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500
byte sized datagrams in fragments with datagram_size=1499 if link
fragmentation is required.

Only firewire-net sets and gets datagram_size without this offset.  The
result is lacking interoperability of firewire-net with OS X, Windows
XP, and presumably Linux' eth1394.  (I did not test with the latter.)
For example, FTP data transfers to a Linux firewire-net box with max_rec
smaller than the 1500 bytes MTU
  - from OS X fail entirely,
  - from Win XP start out with a bunch of fragmented datagrams which
    time out, then continue with unfragmented datagrams because Win XP
    temporarily reduces the MTU to 576 bytes.

So let's fix firewire-net's datagram_size accessors.

Note that firewire-net thereby loses interoperability with unpatched
firewire-net, but only if link fragmentation is employed.  (This happens
with large broadcast datagrams, and with large datagrams on several
FireWire CardBus cards with smaller max_rec than equivalent PCI cards,
and it can be worked around by setting a small enough MTU.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoparisc: Ensure consistent state when switching to kernel stack at syscall entry
John David Anglin [Sat, 29 Oct 2016 03:00:34 +0000 (23:00 -0400)]
parisc: Ensure consistent state when switching to kernel stack at syscall entry

commit 6ed518328d0189e0fdf1bb7c73290d546143ea66 upstream.

We have one critical section in the syscall entry path in which we switch from
the userspace stack to kernel stack. In the event of an external interrupt, the
interrupt code distinguishes between those two states by analyzing the value of
sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that
the value of sr7 is in sync with the currently enabled stack.

This patch now disables interrupts while executing the critical section.  This
prevents the interrupt handler to possibly see an inconsistent state which in
the worst case can lead to crashes.

Interestingly, in the syscall exit path interrupts were already disabled in the
critical section which switches back to the userspace stack.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoip6_tunnel: Clear IP6CB in ip6tunnel_xmit()
Eli Cooper [Tue, 1 Nov 2016 15:45:12 +0000 (23:45 +0800)]
ip6_tunnel: Clear IP6CB in ip6tunnel_xmit()

commit 23f4ffedb7d751c7e298732ba91ca75d224bc1a6 upstream.

skb->cb may contain data from previous layers. In the observed scenario,
the garbage data were misinterpreted as IP6CB(skb)->frag_max_size, so
that small packets sent through the tunnel are mistakenly fragmented.

This patch unconditionally clears the control buffer in ip6tunnel_xmit(),
which affects ip6_tunnel, ip6_udp_tunnel and ip6_gre. Currently none of
these tunnels set IP6CB(skb)->flags, otherwise it needs to be done earlier.

Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: apply to ip6_tnl_xmit2()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agouwb: fix device reference leaks
Johan Hovold [Tue, 1 Nov 2016 11:13:31 +0000 (12:13 +0100)]
uwb: fix device reference leaks

commit d6124b409ca33c100170ffde51cd8dff761454a1 upstream.

This subsystem consistently fails to drop the device reference taken by
class_find_device().

Note that some of these lookup functions already take a reference to the
returned data, while others claim no reference is needed (or does not
seem need one).

Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Drop change to uwb_rc_class_device_exists()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agousb: gadget: u_ether: remove interrupt throttling
Felipe Balbi [Tue, 1 Nov 2016 11:20:22 +0000 (13:20 +0200)]
usb: gadget: u_ether: remove interrupt throttling

commit fd9afd3cbe404998d732be6cc798f749597c5114 upstream.

According to Dave Miller "the networking stack has a
hard requirement that all SKBs which are transmitted
must have their completion signalled in a fininte
amount of time. This is because, until the SKB is
freed by the driver, it holds onto socket,
netfilter, and other subsystem resources."

In summary, this means that using TX IRQ throttling
for the networking gadgets is, at least, complex and
we should avoid it for the time being.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agocan: bcm: fix warning in bcm_connect/proc_register
Oliver Hartkopp [Mon, 24 Oct 2016 19:11:26 +0000 (21:11 +0200)]
can: bcm: fix warning in bcm_connect/proc_register

commit deb507f91f1adbf64317ad24ac46c56eeccfb754 upstream.

Andrey Konovalov reported an issue with proc_register in bcm.c.
As suggested by Cong Wang this patch adds a lock_sock() protection and
a check for unsuccessful proc_create_data() in bcm_connect().

Reference: http://marc.info/?l=linux-netdev&m=147732648731237

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoipv6: Don't use ufo handling on later transformed packets
Jakub Sitnicki [Wed, 26 Oct 2016 09:21:14 +0000 (11:21 +0200)]
ipv6: Don't use ufo handling on later transformed packets

commit f89c56ce710afa65e1b2ead555b52c4807f34ff7 upstream.

Similar to commit c146066ab802 ("ipv4: Don't use ufo handling on later
transformed packets"), don't perform UFO on packets that will be IPsec
transformed. To detect it we rely on the fact that headerlen in
dst_entry is non-zero only for transformation bundles (xfrm_dst
objects).

Unwanted segmentation can be observed with a NETIF_F_UFO capable device,
such as a dummy device:

  DEV=dum0 LEN=1493

  ip li add $DEV type dummy
  ip addr add fc00::1/64 dev $DEV nodad
  ip link set $DEV up
  ip xfrm policy add dir out src fc00::1 dst fc00::2 \
     tmpl src fc00::1 dst fc00::2 proto esp spi 1
  ip xfrm state add src fc00::1 dst fc00::2 \
     proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b

  tcpdump -n -nn -i $DEV -t &
  socat /dev/zero,readbytes=$LEN udp6:[fc00::2]:$LEN

tcpdump output before:

  IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448
  IP6 fc00::1 > fc00::2: frag (1448|48)
  IP6 fc00::1 > fc00::2: ESP(spi=0x00000001,seq=0x2), length 88

... and after:

  IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448
  IP6 fc00::1 > fc00::2: frag (1448|80)

Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")

Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agonet/mlx4_en: Process all completions in RX rings after port goes up
Erez Shitrit [Thu, 27 Oct 2016 13:27:17 +0000 (16:27 +0300)]
net/mlx4_en: Process all completions in RX rings after port goes up

commit 8d59de8f7bb3db296331c665779c653b0c8d13ba upstream.

Currently there is a race between incoming traffic and
initialization flow. HW is able to receive the packets
after INIT_PORT is done and unicast steering is configured.
Before we set priv->port_up NAPI is not scheduled and
receive queues become full. Therefore we never get
new interrupts about the completions.
This issue could happen if running heavy traffic during
bringing port up.
The resolution is to schedule NAPI once port_up is set.
If receive queues were full this will process all cqes
and release them.

Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: mlx4_en_priv::rx_cq is an array of structs not pointers]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoubifs: Fix regression in ubifs_readdir()
Richard Weinberger [Fri, 28 Oct 2016 09:49:03 +0000 (11:49 +0200)]
ubifs: Fix regression in ubifs_readdir()

commit a00052a296e54205cf238c75bd98d17d5d02a6db upstream.

Commit c83ed4c9dbb35 ("ubifs: Abort readdir upon error") broke
overlayfs support because the fix exposed an internal error
code to VFS.

Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Peter Rosin <peda@axentia.se>
Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Fixes: c83ed4c9dbb35 ("ubifs: Abort readdir upon error")
Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoKVM: x86: fix wbinvd_dirty_mask use-after-free
Ido Yariv [Fri, 21 Oct 2016 16:39:57 +0000 (12:39 -0400)]
KVM: x86: fix wbinvd_dirty_mask use-after-free

commit bd768e146624cbec7122ed15dead8daa137d909d upstream.

vcpu->arch.wbinvd_dirty_mask may still be used after freeing it,
corrupting memory. For example, the following call trace may set a bit
in an already freed cpu mask:
    kvm_arch_vcpu_load
    vcpu_load
    vmx_free_vcpu_nested
    vmx_free_vcpu
    kvm_arch_vcpu_free

Fix this by deferring freeing of wbinvd_dirty_mask.

Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agolib/genalloc.c: start search from start of chunk
Daniel Mentz [Fri, 28 Oct 2016 00:46:59 +0000 (17:46 -0700)]
lib/genalloc.c: start search from start of chunk

commit 62e931fac45b17c2a42549389879411572f75804 upstream.

gen_pool_alloc_algo() iterates over the chunks of a pool trying to find
a contiguous block of memory that satisfies the allocation request.

The shortcut

if (size > atomic_read(&chunk->avail))
continue;

makes the loop skip over chunks that do not have enough bytes left to
fulfill the request.  There are two situations, though, where an
allocation might still fail:

(1) The available memory is not contiguous, i.e.  the request cannot
    be fulfilled due to external fragmentation.

(2) A race condition.  Another thread runs the same code concurrently
    and is quicker to grab the available memory.

In those situations, the loop calls pool->algo() to search the entire
chunk, and pool->algo() returns some value that is >= end_bit to
indicate that the search failed.  This return value is then assigned to
start_bit.  The variables start_bit and end_bit describe the range that
should be searched, and this range should be reset for every chunk that
is searched.  Today, the code fails to reset start_bit to 0.  As a
result, prefixes of subsequent chunks are ignored.  Memory allocations
might fail even though there is plenty of room left in these prefixes of
those other chunks.

Fixes: 7f184275aa30 ("lib, Make gen_pool memory allocator lockless")
Link: http://lkml.kernel.org/r/1477420604-28918-1-git-send-email-danielmentz@google.com
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agonetfilter: nf_conntrack_sip: extend request line validation
Ulrich Weber [Mon, 24 Oct 2016 16:07:23 +0000 (18:07 +0200)]
netfilter: nf_conntrack_sip: extend request line validation

commit 444f901742d054a4cd5ff045871eac5131646cfb upstream.

on SIP requests, so a fragmented TCP SIP packet from an allow header starting with
 INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
 Content-Length: 0

will not bet interpreted as an INVITE request. Also Request-URI must start with an alphabetic character.

Confirm with RFC 3261
 Request-Line   =  Method SP Request-URI SP SIP-Version CRLF

Fixes: 30f33e6dee80 ("[NETFILTER]: nf_conntrack_sip: support method specific request/response handling")
Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
Acked-by: Marco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agovt: clear selection before resizing
Scot Doyle [Thu, 13 Oct 2016 17:12:43 +0000 (12:12 -0500)]
vt: clear selection before resizing

commit 009e39ae44f4191188aeb6dfbf661b771dbbe515 upstream.

When resizing a vt its selection may exceed the new size, resulting in
an invalid memory access [1]. Clear the selection before resizing.

[1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.com

Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agotty: limit terminal size to 4M chars
Dmitry Vyukov [Fri, 14 Oct 2016 13:18:28 +0000 (15:18 +0200)]
tty: limit terminal size to 4M chars

commit 32b2921e6a7461fe63b71217067a6cf4bddb132f upstream.

Size of kmalloc() in vc_do_resize() is controlled by user.
Too large kmalloc() size triggers WARNING message on console.
Put a reasonable upper bound on terminal size to prevent WARNINGs.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
CC: David Rientjes <rientjes@google.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Cc: syzkaller@googlegroups.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agotty: vt, fix bogus division in csi_J
Jiri Slaby [Mon, 3 Oct 2016 09:00:17 +0000 (11:00 +0200)]
tty: vt, fix bogus division in csi_J

commit 42acfc6615f47e465731c263bee0c799edb098f2 upstream.

In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is
divided by 2 inappropriatelly. But scr_memsetw expects size, not
count, because it divides the size by 2 on its own before doing actual
memset-by-words.

So remove the bogus division.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Petr Písař <ppisar@redhat.com>
Fixes: f8df13e0a9 (tty: Clean console safely)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoALSA: usb-audio: Add quirk for Syntek STK1160
Marcel Hasler [Wed, 26 Oct 2016 22:42:27 +0000 (00:42 +0200)]
ALSA: usb-audio: Add quirk for Syntek STK1160

commit bdc3478f90cd4d2928197f36629d5cf93b64dbe9 upstream.

The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves
the issue reported on the mailing list
(http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes
bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071).

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
Ching Huang [Wed, 19 Oct 2016 09:50:26 +0000 (17:50 +0800)]
scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware

commit 2bf7dc8443e113844d078fd6541b7f4aa544f92f upstream.

The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller
firmware. Depending on how drive caches are handled internally by
controller firmware this could potentially lead to data integrity
problems.

Ensure that cache flushes are passed to the controller.

[mkp: applied by hand and removed unused vars]

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reported-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
Ewan D. Milne [Wed, 26 Oct 2016 15:22:53 +0000 (11:22 -0400)]
scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded

commit 4d2b496f19f3c2cfaca1e8fa0710688b5ff3811d upstream.

map_storep was not being vfree()'d in the module_exit call.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agostaging: iio: ad5933: avoid uninitialized variable in error case
Arnd Bergmann [Mon, 24 Oct 2016 15:22:01 +0000 (17:22 +0200)]
staging: iio: ad5933: avoid uninitialized variable in error case

commit 34eee70a7b82b09dbda4cb453e0e21d460dae226 upstream.

The ad5933_i2c_read function returns an error code to indicate
whether it could read data or not. However ad5933_work() ignores
this return code and just accesses the data unconditionally,
which gets detected by gcc as a possible bug:

drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work':
drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized]

This adds minimal error handling so we only evaluate the
data if it was correctly read.

Link: https://patchwork.kernel.org/patch/8110281/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agohv: do not lose pending heartbeat vmbus packets
Long Li [Wed, 5 Oct 2016 23:57:46 +0000 (16:57 -0700)]
hv: do not lose pending heartbeat vmbus packets

commit 407a3aee6ee2d2cb46d9ba3fc380bc29f35d020c upstream.

The host keeps sending heartbeat packets independent of the
guest responding to them.  Even though we respond to the heartbeat messages at
interrupt level, we can have situations where there maybe multiple heartbeat
messages pending that have not been responded to. For instance this occurs when the
VM is paused and the host continues to send the heartbeat messages.
Address this issue by draining and responding to all
the heartbeat messages that maybe pending.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
Kashyap Desai [Fri, 21 Oct 2016 13:33:32 +0000 (06:33 -0700)]
scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices

commit 1e793f6fc0db920400574211c48f9157a37e3945 upstream.

Commit 02b01e010afe ("megaraid_sas: return sync cache call with
success") modified the driver to successfully complete SYNCHRONIZE_CACHE
commands without passing them to the controller. Disk drive caches are
only explicitly managed by controller firmware when operating in RAID
mode. So this commit effectively disabled writeback cache flushing for
any drives used in JBOD mode, leading to data integrity failures.

[mkp: clarified patch description]

Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agodm table: fix missing dm_put_target_type() in dm_table_add_target()
tang.junhui [Fri, 21 Oct 2016 01:35:32 +0000 (09:35 +0800)]
dm table: fix missing dm_put_target_type() in dm_table_add_target()

commit dafa724bf582181d9a7d54f5cb4ca0bf8ef29269 upstream.

dm_get_target_type() was previously called so any error returned from
dm_table_add_target() must first call dm_put_target_type().  Otherwise
the DM target module's reference count will leak and the associated
kernel module will be unable to be removed.

Also, leverage the fact that r is already -EINVAL and remove an extra
newline.

Fixes: 36a0456 ("dm table: add immutable feature")
Fixes: cc6cbe1 ("dm table: add always writeable feature")
Fixes: 3791e2f ("dm table: add singleton feature")
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[bwh: Backported to 3.2: adjuat context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoACPI / APEI: Fix incorrect return value of ghes_proc()
Punit Agrawal [Tue, 18 Oct 2016 16:07:19 +0000 (17:07 +0100)]
ACPI / APEI: Fix incorrect return value of ghes_proc()

commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream.

Although ghes_proc() tests for errors while reading the error status,
it always return success (0). Fix this by propagating the return
value.

Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support)
Signed-of-by: Punit Agrawal <punit.agrawa.@arm.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agopowerpc: Convert cmp to cmpd in idle enter sequence
Segher Boessenkool [Thu, 6 Oct 2016 13:42:19 +0000 (13:42 +0000)]
powerpc: Convert cmp to cmpd in idle enter sequence

commit 80f23935cadb1c654e81951f5a8b7ceae0acc1b4 upstream.

PowerPC's "cmp" instruction has four operands. Normally people write
"cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently
people forget, and write "cmp" with just three operands.

With older binutils this is silently accepted as if this was "cmpw",
while often "cmpd" is wanted. With newer binutils GAS will complain
about this for 64-bit code. For 32-bit code it still silently assumes
"cmpw" is what is meant.

In this instance the code comes directly from ISA v2.07, including the
cmp, but cmpd is correct. Backport to stable so that new toolchains can
build old kernels.

Fixes: 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode")
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoxhci: add restart quirk for Intel Wildcatpoint PCH
Mathias Nyman [Thu, 20 Oct 2016 15:09:18 +0000 (18:09 +0300)]
xhci: add restart quirk for Intel Wildcatpoint PCH

commit 4c39135aa412d2f1381e43802523da110ca7855c upstream.

xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the
same quirks to prevent machines from spurious restart while
shutting them down.

Reported-by: Hasan Mahmood <hasan.mahm@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoubifs: Abort readdir upon error
Richard Weinberger [Wed, 19 Oct 2016 10:43:07 +0000 (12:43 +0200)]
ubifs: Abort readdir upon error

commit c83ed4c9dbb358b9e7707486e167e940d48bfeed upstream.

If UBIFS is facing an error while walking a directory, it reports this
error and ubifs_readdir() returns the error code. But the VFS readdir
logic does not make the getdents system call fail in all cases. When the
readdir cursor indicates that more entries are present, the system call
will just return and the libc wrapper will try again since it also
knows that more entries are present.
This causes the libc wrapper to busy loop for ever when a directory is
corrupted on UBIFS.
A common approach do deal with corrupted directory entries is
skipping them by setting the cursor to the next entry. On UBIFS this
approach is not possible since we cannot compute the next directory
entry cursor position without reading the current entry. So all we can
do is setting the cursor to the "no more entries" position and make
getdents exit.

Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoubifs: Fix xattr_names length in exit paths
Richard Weinberger [Tue, 20 Sep 2016 08:08:30 +0000 (10:08 +0200)]
ubifs: Fix xattr_names length in exit paths

commit 843741c5778398ea67055067f4cc65ae6c80ca0e upstream.

When the operation fails we also have to undo the changes
we made to ->xattr_names. Otherwise listxattr() will report
wrong lengths.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoInput: i8042 - add XMG C504 to keyboard reset table
Patrick Scheuring [Wed, 19 Oct 2016 19:04:02 +0000 (12:04 -0700)]
Input: i8042 - add XMG C504 to keyboard reset table

commit da25311c7ca8b0254a686fc0d597075b9aa3b683 upstream.

The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.

With this patch the touchpad is detected:

$ dmesg | grep -E "(i8042|Elantech|elantech)"

[    2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.680372] i8042: Attempting to reset device connected to KBD port
[    2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[    3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[    3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[    3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6

Signed-off-by: Patrick Scheuring <patrick.scheuring.dev@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoisofs: Do not return EACCES for unknown filesystems
Jan Kara [Tue, 4 Oct 2016 11:44:06 +0000 (13:44 +0200)]
isofs: Do not return EACCES for unknown filesystems

commit a2ed0b391dd9c3ef1d64c7c3e370f4a5ffcd324a upstream.

When isofs_mount() is called to mount a device read-write, it returns
EACCES even before it checks that the device actually contains an isofs
filesystem. This may confuse mount(8) which then tries to mount all
subsequent filesystem types in read-only mode.

Fix the problem by returning EACCES only once we verify that the device
indeed contains an iso9660 filesystem.

Fixes: 17b7f7cf58926844e1dd40f5eb5348d481deca6a
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: zfcp: spin_lock_irqsave() is not nestable
Dan Carpenter [Fri, 14 Oct 2016 20:18:39 +0000 (16:18 -0400)]
scsi: zfcp: spin_lock_irqsave() is not nestable

commit e7cb08e894a0b876443ef8fdb0706575dc00a5d2 upstream.

We accidentally overwrite the original saved value of "flags" so that we
can't re-enable IRQs at the end of the function.  Presumably this
function is mostly called with IRQs disabled or it would be obvious in
testing.

Fixes: aceeffbb59bb ("zfcp: trace full payload of all SAN records (req,resp,iels)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agomac80211: discard multicast and 4-addr A-MSDUs
Johannes Berg [Wed, 5 Oct 2016 08:14:42 +0000 (10:14 +0200)]
mac80211: discard multicast and 4-addr A-MSDUs

commit ea720935cf6686f72def9d322298bf7e9bd53377 upstream.

In mac80211, multicast A-MSDUs are accepted in many cases that
they shouldn't be accepted in:
 * drop A-MSDUs with a multicast A1 (RA), as required by the
   spec in 9.11 (802.11-2012 version)
 * drop A-MSDUs with a 4-addr header, since the fourth address
   can't actually be useful for them; unless 4-address frame
   format is actually requested, even though the fourth address
   is still not useful in this case, but ignored

Accepting the first case, in particular, is very problematic
since it allows anyone else with possession of a GTK to send
unicast frames encapsulated in a multicast A-MSDU, even when
the AP has client isolation enabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: Fix use-after-free
Ming Lei [Sun, 9 Oct 2016 05:23:27 +0000 (13:23 +0800)]
scsi: Fix use-after-free

commit bcd8f2e94808fcddf6ef3af5f060a36820dcc432 upstream.

This patch fixes one use-after-free report[1] by KASAN.

In __scsi_scan_target(), when a type 31 device is probed,
SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned
again.

Inside the following scsi_report_lun_scan(), one new scsi_device
instance is allocated, and scsi_probe_and_add_lun() is called again to
probe the target and still see type 31 device, finally
__scsi_remove_device() is called to remove & free the device at the end
of scsi_probe_and_add_lun(), so cause use-after-free in
scsi_report_lun_scan().

And the following SCSI log can be observed:

scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36
scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0
scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added
scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0)
scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0
scsi 0:0:2:0: scsi scan: REPORT LUN scan
scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36
scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0
scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added
BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104

This patch fixes the issue by moving the putting reference at
the end of scsi_report_lun_scan().

[1] KASAN report
==================================================================
[    3.274597] PM: Adding info for serio:serio1
[    3.275127] BUG: KASAN: use-after-free in __scsi_scan_target+0xd87/0xdf0 at addr ffff880254d8c304
[    3.275653] Read of size 4 by task kworker/u10:0/27
[    3.275903] CPU: 3 PID: 27 Comm: kworker/u10:0 Not tainted 4.8.0 #2121
[    3.276258] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[    3.276797] Workqueue: events_unbound async_run_entry_fn
[    3.277083]  ffff880254d8c380 ffff880259a37870 ffffffff94bbc6c1 ffff880078402d80
[    3.277532]  ffff880254d8bb80 ffff880259a37898 ffffffff9459fec1 ffff880259a37930
[    3.277989]  ffff880254d8bb80 ffff880078402d80 ffff880259a37920 ffffffff945a0165
[    3.278436] Call Trace:
[    3.278528]  [<ffffffff94bbc6c1>] dump_stack+0x65/0x84
[    3.278797]  [<ffffffff9459fec1>] kasan_object_err+0x21/0x70
[    3.279063] device: 'psaux': device_add
[    3.279616]  [<ffffffff945a0165>] kasan_report_error+0x205/0x500
[    3.279651] PM: Adding info for No Bus:psaux
[    3.280202]  [<ffffffff944ecd22>] ? kfree_const+0x22/0x30
[    3.280486]  [<ffffffff94bc2dc9>] ? kobject_release+0x119/0x370
[    3.280805]  [<ffffffff945a0543>] __asan_report_load4_noabort+0x43/0x50
[    3.281170]  [<ffffffff9507e1f7>] ? __scsi_scan_target+0xd87/0xdf0
[    3.281506]  [<ffffffff9507e1f7>] __scsi_scan_target+0xd87/0xdf0
[    3.281848]  [<ffffffff9507d470>] ? scsi_add_device+0x30/0x30
[    3.282156]  [<ffffffff94f7f660>] ? pm_runtime_autosuspend_expiration+0x60/0x60
[    3.282570]  [<ffffffff956ddb07>] ? _raw_spin_lock+0x17/0x40
[    3.282880]  [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160
[    3.283200]  [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0
[    3.283563]  [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250
[    3.283882]  [<ffffffff9507efc1>] do_scan_async+0x41/0x450
[    3.284173]  [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610
[    3.284492]  [<ffffffff941a8954>] ? pwq_dec_nr_in_flight+0x124/0x2a0
[    3.284876]  [<ffffffff941d1770>] ? preempt_count_add+0x130/0x160
[    3.285207]  [<ffffffff941a9a84>] process_one_work+0x544/0x12d0
[    3.285526]  [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0
[    3.285844]  [<ffffffff941aa810>] ? process_one_work+0x12d0/0x12d0
[    3.286182]  [<ffffffff941bb365>] kthread+0x1c5/0x260
[    3.286443]  [<ffffffff940855cd>] ? __switch_to+0x88d/0x1430
[    3.286745]  [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0
[    3.287085]  [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40
[    3.287368]  [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0
[    3.287697] Object at ffff880254d8bb80, in cache kmalloc-2048 size: 2048
[    3.288064] Allocated:
[    3.288147] PID = 27
[    3.288218]  [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50
[    3.288531]  [<ffffffff9459f246>] save_stack+0x46/0xd0
[    3.288806]  [<ffffffff9459f4bd>] kasan_kmalloc+0xad/0xe0
[    3.289098]  [<ffffffff9459c07e>] __kmalloc+0x13e/0x250
[    3.289378]  [<ffffffff95078e5a>] scsi_alloc_sdev+0xea/0xcf0
[    3.289701]  [<ffffffff9507de76>] __scsi_scan_target+0xa06/0xdf0
[    3.290034]  [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160
[    3.290362]  [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0
[    3.290724]  [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250
[    3.291055]  [<ffffffff9507efc1>] do_scan_async+0x41/0x450
[    3.291354]  [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610
[    3.291695]  [<ffffffff941a9a84>] process_one_work+0x544/0x12d0
[    3.292022]  [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0
[    3.292325]  [<ffffffff941bb365>] kthread+0x1c5/0x260
[    3.292594]  [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40
[    3.292886] Freed:
[    3.292945] PID = 27
[    3.293016]  [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50
[    3.293327]  [<ffffffff9459f246>] save_stack+0x46/0xd0
[    3.293600]  [<ffffffff9459fa61>] kasan_slab_free+0x71/0xb0
[    3.293916]  [<ffffffff9459bac2>] kfree+0xa2/0x1f0
[    3.294168]  [<ffffffff9508158a>] scsi_device_dev_release_usercontext+0x50a/0x730
[    3.294598]  [<ffffffff941ace9a>] execute_in_process_context+0xda/0x130
[    3.294974]  [<ffffffff9508107c>] scsi_device_dev_release+0x1c/0x20
[    3.295322]  [<ffffffff94f566f6>] device_release+0x76/0x1e0
[    3.295626]  [<ffffffff94bc2db7>] kobject_release+0x107/0x370
[    3.295942]  [<ffffffff94bc29ce>] kobject_put+0x4e/0xa0
[    3.296222]  [<ffffffff94f56e17>] put_device+0x17/0x20
[    3.296497]  [<ffffffff9505201c>] scsi_device_put+0x7c/0xa0
[    3.296801]  [<ffffffff9507e1bc>] __scsi_scan_target+0xd4c/0xdf0
[    3.297132]  [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160
[    3.297458]  [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0
[    3.297829]  [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250
[    3.298156]  [<ffffffff9507efc1>] do_scan_async+0x41/0x450
[    3.298453]  [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610
[    3.298777]  [<ffffffff941a9a84>] process_one_work+0x544/0x12d0
[    3.299105]  [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0
[    3.299408]  [<ffffffff941bb365>] kthread+0x1c5/0x260
[    3.299676]  [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40
[    3.299967] Memory state around the buggy address:
[    3.300209]  ffff880254d8c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    3.300608]  ffff880254d8c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    3.300986] >ffff880254d8c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    3.301408]                    ^
[    3.301550]  ffff880254d8c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[    3.301987]  ffff880254d8c400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.302396]
==================================================================

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agopowerpc/64: Fix incorrect return value from __copy_tofrom_user
Paul Mackerras [Tue, 11 Oct 2016 11:25:47 +0000 (22:25 +1100)]
powerpc/64: Fix incorrect return value from __copy_tofrom_user

commit 1a34439e5a0b2235e43f96816dbb15ee1154f656 upstream.

Debugging a data corruption issue with virtio-net/vhost-net led to
the observation that __copy_tofrom_user was occasionally returning
a value 16 larger than it should.  Since the return value from
__copy_tofrom_user is the number of bytes not copied, this means
that __copy_tofrom_user can occasionally return a value larger
than the number of bytes it was asked to copy.  In turn this can
cause higher-level copy functions such as copy_page_to_iter_iovec
to corrupt memory by copying data into the wrong memory locations.

It turns out that the failing case involves a fault on the store
at label 79, and at that point the first unmodified byte of the
destination is at R3 + 16.  Consequently the exception handler
for that store needs to add 16 to R3 before using it to work out
how many bytes were not copied, but in this one case it was not
adding the offset to R3.  To fix it, this moves the label 179 to
the point where we add 16 to R3.  I have checked manually all the
exception handlers for the loads and stores in this code and the
rest of them are correct (it would be excellent to have an
automated test of all the exception cases).

This bug has been present since this code was initially
committed in May 2002 to Linux version 2.5.20.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agocrypto: gcm - Fix IV buffer size in crypto_gcm_setkey
Ondrej Mosnáček [Fri, 23 Sep 2016 08:47:32 +0000 (10:47 +0200)]
crypto: gcm - Fix IV buffer size in crypto_gcm_setkey

commit 50d2e6dc1f83db0563c7d6603967bf9585ce934b upstream.

The cipher block size for GCM is 16 bytes, and thus the CTR transform
used in crypto_gcm_setkey() will also expect a 16-byte IV. However,
the code currently reserves only 8 bytes for the IV, causing
an out-of-bounds access in the CTR transform. This patch fixes
the issue by setting the size of the IV buffer to 16 bytes.

Fixes: 84c911523020 ("[CRYPTO] gcm: Add support for async ciphers")
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agofuse: listxattr: verify xattr list
Miklos Szeredi [Sat, 1 Oct 2016 05:32:32 +0000 (07:32 +0200)]
fuse: listxattr: verify xattr list

commit cb3ae6d25a5471be62bfe6ac1fccc0e91edeaba0 upstream.

Make sure userspace filesystem is returning a well formed list of xattr
names (zero or more nonzero length, null terminated strings).

[Michael Theall: only verify in the nonzero size case]

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agofuse: fix killing s[ug]id in setattr
Miklos Szeredi [Sat, 1 Oct 2016 05:32:32 +0000 (07:32 +0200)]
fuse: fix killing s[ug]id in setattr

commit a09f99eddef44035ec764075a37bace8181bec38 upstream.

Fuse allowed VFS to set mode in setattr in order to clear suid/sgid on
chown and truncate, and (since writeback_cache) write.  The problem with
this is that it'll potentially restore a stale mode.

The poper fix would be to let the filesystems do the suid/sgid clearing on
the relevant operations.  Possibly some are already doing it but there's no
way we can detect this.

So fix this by refreshing and recalculating the mode.  Do this only if
ATTR_KILL_S[UG]ID is set to not destroy performance for writes.  This is
still racy but the size of the window is reduced.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agofuse: invalidate dir dentry after chmod
Miklos Szeredi [Sat, 1 Oct 2016 05:32:32 +0000 (07:32 +0200)]
fuse: invalidate dir dentry after chmod

commit 5e2b8828ff3d79aca8c3a1730652758753205b61 upstream.

Without "default_permissions" the userspace filesystem's lookup operation
needs to perform the check for search permission on the directory.

If directory does not allow search for everyone (this is quite rare) then
userspace filesystem has to set entry timeout to zero to make sure
permissions are always performed.

Changing the mode bits of the directory should also invalidate the
(previously cached) dentry to make sure the next lookup will have a chance
of updating the timeout, if needed.

Reported-by: Jean-Pierre André <jean-pierre.andre@wanadoo.fr>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Open-code d_is_dir()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agos390/con3270: fix insufficient space padding
Sascha Silbe [Tue, 20 Sep 2016 17:09:07 +0000 (19:09 +0200)]
s390/con3270: fix insufficient space padding

commit 6cd997db911f28f2510b771691270c52b63ed2e6 upstream.

con3270 contains an optimisation that reduces the amount of data to be
transmitted to the 3270 terminal by putting a Repeat to Address (RA)
order into the data stream. The RA order itself takes up space, so
con3270 only uses it if there's enough space left in the line
buffer. Otherwise it just pads out the line manually.

For lines that were _just_ short enough that the RA order still fit in
the line buffer, the line was instead padded with an insufficient
amount of spaces. This was caused by examining the size of the
allocated line buffer rather than the length of the string to be
displayed.

For con3270_cline_end(), we just compare against the line length. For
con3270_update_string() however that isn't available anymore, so we
check whether the Repeat to Address order is present.

Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git)
Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agos390/con3270: fix use of uninitialised data
Sascha Silbe [Thu, 11 Aug 2016 19:34:54 +0000 (21:34 +0200)]
s390/con3270: fix use of uninitialised data

commit c14f2aac7aa147861793eed9f41f91dd530f0be1 upstream.

con3270 contains an optimisation that reduces the amount of data to be
transmitted to the 3270 terminal by putting a Repeat to Address (RA)
order into the data stream. The RA order itself takes up space, so
con3270 only uses it if there's enough space left in the line
buffer. Otherwise it just pads out the line manually.

For lines too long to include the RA order, one byte was left
uninitialised. This was caused by an off-by-one bug in the loop that
pads out the line. Since the buffer is allocated from a common pool,
the single byte left uninitialised contained some previous buffer
content. Usually this was just a space or some character (which can
result in clutter but is otherwise harmless). Sometimes, however, it
was a Repeat to Address order, messing up the entire screen layout and
causing the display to send the entire buffer content on every
keystroke.

Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git)
Reported-by: Liu Jing <liujbjl@linux.vnet.ibm.com>
Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoext4: release bh in make_indexed_dir
gmail [Fri, 30 Sep 2016 05:33:37 +0000 (01:33 -0400)]
ext4: release bh in make_indexed_dir

commit e81d44778d1d57bbaef9e24c4eac7c8a7a401d40 upstream.

The commit 6050d47adcad: "ext4: bail out from make_indexed_dir() on
first error" could end up leaking bh2 in the error path.

[ Also avoid renaming bh2 to bh, which just confuses things --tytso ]

Signed-off-by: yangsheng <yngsion@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agopowerpc/vdso64: Use double word compare on pointers
Anton Blanchard [Sun, 25 Sep 2016 07:16:53 +0000 (17:16 +1000)]
powerpc/vdso64: Use double word compare on pointers

commit 5045ea37377ce8cca6890d32b127ad6770e6dce5 upstream.

__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.

A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:

  printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000));
  printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000));

And we get:

  0
  -1

The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.

I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.

Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoNFSv4: Open state recovery must account for file permission changes
Trond Myklebust [Thu, 22 Sep 2016 17:39:18 +0000 (13:39 -0400)]
NFSv4: Open state recovery must account for file permission changes

commit 304020fe48c6c7fff8b5a38f382b54404f0f79d3 upstream.

If the file permissions change on the server, then we may not be able to
recover open state. If so, we need to ensure that we mark the file
descriptor appropriately.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoUSB: serial: cp210x: Add ID for a Juniper console
Kyle Jones [Fri, 23 Sep 2016 18:28:37 +0000 (13:28 -0500)]
USB: serial: cp210x: Add ID for a Juniper console

commit decc5360f23e9efe0252094f47f57f254dcbb3a9 upstream.

Signed-off-by: Kyle Jones <kyle@kf5jwc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agommc: block: don't use CMD23 with very old MMC cards
Daniel Glöckner [Tue, 30 Aug 2016 12:17:30 +0000 (14:17 +0200)]
mmc: block: don't use CMD23 with very old MMC cards

commit 0ed50abb2d8fc81570b53af25621dad560cd49b3 upstream.

CMD23 aka SET_BLOCK_COUNT was introduced with MMC v3.1.
Older versions of the specification allowed to terminate
multi-block transfers only with CMD12.

The patch fixes the following problem:

  mmc0: new MMC card at address 0001
  mmcblk0: mmc0:0001 SDMB-16 15.3 MiB
  mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
  ...
  blk_update_request: I/O error, dev mmcblk0, sector 0
  Buffer I/O error on dev mmcblk0, logical block 0, async page read
   mmcblk0: unable to read partition table

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoregulator: tps65910: Work around silicon erratum SWCZ010
Jan Remmet [Fri, 23 Sep 2016 08:52:00 +0000 (10:52 +0200)]
regulator: tps65910: Work around silicon erratum SWCZ010

commit 8f9165c981fed187bb483de84caf9adf835aefda upstream.

http://www.ti.com/lit/pdf/SWCZ010:
  DCDC o/p voltage can go higher than programmed value

Impact:
VDDI, VDD2, and VIO output programmed voltage level can go higher than
expected or crash, when coming out of PFM to PWM mode or using DVFS.

Description:
When DCDC CLK SYNC bits are 11/01:
* VIO 3-MHz oscillator is the source clock of the digital core and input
  clock of VDD1 and VDD2
* Turn-on of VDD1 and VDD2 HSD PFETis synchronized or at a constant
  phase shift
* Current pulled though VCC1+VCC2 is Iload(VDD1) + Iload(VDD2)
* The 3 HSD PFET will be turned-on at the same time, causing the highest
  possible switching noise on the application. This noise level depends
  on the layout, the VBAT level, and the load current. The noise level
  increases with improper layout.

When DCDC CLK SYNC bits are 00:
* VIO 3-MHz oscillator is the source clock of digital core
* VDD1 and VDD2 are running on their own 3-MHz oscillator
* Current pulled though VCC1+VCC2 average of Iload(VDD1) + Iload(VDD2)
* The switching noise of the 3 SMPS will be randomly spread over time,
  causing lower overall switching noise.

Workaround:
Set DCDCCTRL_REG[1:0]= 00.

Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
[bwh: Backported to 3.2: use tps65910_clear_bits()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants
Anssi Hannula [Fri, 23 Sep 2016 03:43:47 +0000 (06:43 +0300)]
ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream.

The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.

Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: David W <regulars@d-dub.org.uk>
Tested-by: David W <regulars@d-dub.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: keep using dev_info()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agonet/mlx4_core: Fix deadlock when switching between polling and event fw commands
Jack Morgenstein [Tue, 20 Sep 2016 11:39:42 +0000 (14:39 +0300)]
net/mlx4_core: Fix deadlock when switching between polling and event fw commands

commit a7e1f04905e5b2b90251974dddde781301b6be37 upstream.

When switching from polling-based fw commands to event-based fw
commands, there is a race condition which could cause a fw command
in another task to hang: that task will keep waiting for the polling
sempahore, but may never be able to acquire it. This is due to
mlx4_cmd_use_events, which "down"s the sempahore back to 0.

During driver initialization, this is not a problem, since no other
tasks which invoke FW commands are active.

However, there is a problem if the driver switches to polling mode
and then back to event mode during normal operation.

The "test_interrupts" feature does exactly that.
Running "ethtool -t <eth device> offline" causes the PF driver to
temporarily switch to polling mode, and then back to event mode.
(Note that for VF drivers, such switching is not performed).

Fix this by adding a read-write semaphore for protection when
switching between modes.

Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agousb: misc: legousbtower: Fix NULL pointer deference
Greg Kroah-Hartman [Mon, 19 Sep 2016 18:09:51 +0000 (19:09 +0100)]
usb: misc: legousbtower: Fix NULL pointer deference

commit 2fae9e5a7babada041e2e161699ade2447a01989 upstream.

This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.

The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.

This bug has existed since 2003. Patch tested by emulated device.

Reported-by: James Patrick-Evans <james@jmp-e.com>
Tested-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: keep using err()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoALSA: ali5451: Fix out-of-bound position reporting
Takashi Iwai [Wed, 21 Sep 2016 12:38:02 +0000 (14:38 +0200)]
ALSA: ali5451: Fix out-of-bound position reporting

commit db68577966abc1aeae4ec597b3dcfa0d56e92041 upstream.

The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
  snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.

Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agopowerpc/nvram: Fix an incorrect partition merge
Pan Xinhui [Thu, 10 Dec 2015 07:30:02 +0000 (15:30 +0800)]
powerpc/nvram: Fix an incorrect partition merge

commit 11b7e154b132232535befe51c55db048069c8461 upstream.

When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.

Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .

Fixes: fa2b4e54d41f ("powerpc/nvram: Improve partition removal")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoscsi: ibmvfc: Fix I/O hang when port is not mapped
Brian King [Mon, 19 Sep 2016 13:59:19 +0000 (08:59 -0500)]
scsi: ibmvfc: Fix I/O hang when port is not mapped

commit 07d0e9a847401ffd2f09bd450d41644cd090e81d upstream.

If a VFC port gets unmapped in the VIOS, it may not respond with a CRQ
init complete following H_REG_CRQ. If this occurs, we can end up having
called scsi_block_requests and not a resulting unblock until the init
complete happens, which may never occur, and we end up hanging I/O
requests.  This patch ensures the host action stay set to
IBMVFC_HOST_ACTION_TGT_DEL so we move all rports into devloss state and
unblock unless we receive an init complete.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoiommu/amd: Free domain id when free a domain of struct dma_ops_domain
Baoquan He [Thu, 15 Sep 2016 08:50:52 +0000 (16:50 +0800)]
iommu/amd: Free domain id when free a domain of struct dma_ops_domain

commit c3db901c54466a9c135d1e6e95fec452e8a42666 upstream.

The current code missed freeing domain id when free a domain of
struct dma_ops_domain.

Signed-off-by: Baoquan He <bhe@redhat.com>
Fixes: ec487d1a110a ('x86, AMD IOMMU: add domain allocation and deallocation functions')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agosctp: do not return the transmit err back to sctp_sendmsg
Xin Long [Tue, 13 Sep 2016 18:04:19 +0000 (02:04 +0800)]
sctp: do not return the transmit err back to sctp_sendmsg

commit 66388f2c08dfa38071f9eceae7bb29060d9be9aa upstream.

Once a chunk is enqueued successfully, sctp queues can take care of it.
Even if it is failed to transmit (like because of nomem), it should be
put into retransmit queue.

If sctp report this error to users, it confuses them, they may resend
that msg, but actually in kernel sctp stack is in charge of retransmit
it already.

Besides, this error probably is not from the failure of transmitting
current msg, but transmitting or retransmitting another msg's chunks,
as sctp_outq_flush just tries to send out all transports' chunks.

This patch is to make sctp_cmd_send_msg return avoid, and not return the
transmit err back to sctp_sendmsg

Fixes: 8b570dc9f7b6 ("sctp: only drop the reference on the datamsg after sending a msg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: no gfp flags parameter]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoreiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
Mike Galbraith [Mon, 13 Aug 2012 13:21:23 +0000 (15:21 +0200)]
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()

commit 420902c9d086848a7548c83e0a49021514bd71b7 upstream.

If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.

crash> ps|grep UN
    715      2   3  ffff880220734d30  UN   0.0       0      0  [kworker/3:2]
   9369   9341   2  ffff88021ffb7560  UN   1.3  493404 123184  Xorg
   9665   9664   3  ffff880225b92ab0  UN   0.0   47368    812  udisks-daemon
  10635  10403   3  ffff880222f22c70  UN   0.0   14904    936  mount
crash> bt ffff880220734d30
PID: 715    TASK: ffff880220734d30  CPU: 3   COMMAND: "kworker/3:2"
 #0 [ffff8802244c3c20] schedule at ffffffff8144584b
 #1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3
 #2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5
 #3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs]
 #4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs]
 #5 [ffff8802244c3e08] process_one_work at ffffffff81073726
 #6 [ffff8802244c3e68] worker_thread at ffffffff81073eba
 #7 [ffff8802244c3ec8] kthread at ffffffff810782e0
 #8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064
crash> rd ffff8802244c3cc8 10
ffff8802244c3cc8:  ffffffff814472b3 ffff880222f23250   .rD.....P2."....
ffff8802244c3cd8:  0000000000000000 0000000000000286   ................
ffff8802244c3ce8:  ffff8802244c3d30 ffff880220734d80   0=L$.....Ms ....
ffff8802244c3cf8:  ffff880222e8f628 0000000000000000   (.."............
ffff8802244c3d08:  0000000000000000 0000000000000002   ................
crash> struct rt_mutex ffff880222e8f628
struct rt_mutex {
  wait_lock = {
    raw_lock = {
      slock = 65537
    }
  },
  wait_list = {
    node_list = {
      next = 0xffff8802244c3d48,
      prev = 0xffff8802244c3d48
    }
  },
  owner = 0xffff880222f22c71,
  save_state = 0
}
crash> bt 0xffff880222f22c70
PID: 10635  TASK: ffff880222f22c70  CPU: 3   COMMAND: "mount"
 #0 [ffff8802216a9868] schedule at ffffffff8144584b
 #1 [ffff8802216a9910] schedule_timeout at ffffffff81446865
 #2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74
 #3 [ffff8802216a9a30] flush_work at ffffffff810712d3
 #4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463
 #5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba
 #6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632
 #7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c
 #8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs]
 #9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs]
    RIP: 00007f7b9303997a  RSP: 00007ffff443c7a8  RFLAGS: 00010202
    RAX: 00000000000000a5  RBX: ffffffff8144ef12  RCX: 00007f7b932e9ee0
    RDX: 00007f7b93d9a400  RSI: 00007f7b93d9a3e0  RDI: 00007f7b93d9a3c0
    RBP: 00007f7b93d9a2c0   R8: 00007f7b93d9a550   R9: 0000000000000001
    R10: ffffffffc0ed040e  R11: 0000000000000202  R12: 000000000000040e
    R13: 0000000000000000  R14: 00000000c0ed040e  R15: 00007ffff443ca20
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agoext4: reinforce check of i_dtime when clearing high fields of uid and gid
Daeho Jeong [Tue, 6 Sep 2016 02:56:10 +0000 (22:56 -0400)]
ext4: reinforce check of i_dtime when clearing high fields of uid and gid

commit 93e3b4e6631d2a74a8cf7429138096862ff9f452 upstream.

Now, ext4_do_update_inode() clears high 16-bit fields of uid/gid
of deleted and evicted inode to fix up interoperability with old
kernels. However, it checks only i_dtime of an inode to determine
whether the inode was deleted and evicted, and this is very risky,
because i_dtime can be used for the pointer maintaining orphan inode
list, too. We need to further check whether the i_dtime is being
used for the orphan inode list even if the i_dtime is not NULL.

We found that high 16-bit fields of uid/gid of inode are unintentionally
and permanently cleared when the inode truncation is just triggered,
but not finished, and the inode metadata, whose high uid/gid bits are
cleared, is written on disk, and the sudden power-off follows that
in order.

Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agocx231xx: fix GPIOs for Pixelview SBTVD hybrid
Mauro Carvalho Chehab [Sun, 4 Sep 2016 13:06:39 +0000 (10:06 -0300)]
cx231xx: fix GPIOs for Pixelview SBTVD hybrid

commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream.

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agocx231xx: don't return error on success
Mauro Carvalho Chehab [Sun, 4 Sep 2016 12:56:33 +0000 (09:56 -0300)]
cx231xx: don't return error on success

commit 1871d718a9db649b70f0929d2778dc01bc49b286 upstream.

The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agomb86a20s: fix the locking logic
Mauro Carvalho Chehab [Sun, 4 Sep 2016 13:16:18 +0000 (10:16 -0300)]
mb86a20s: fix the locking logic

commit dafb65fb98d85d8e78405e82c83e81975e5d5480 upstream.

On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.

However, the zigzag loop is too fast to let it sync.

As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agortlwifi: Fix missing country code for Great Britain
Larry Finger [Mon, 22 Aug 2016 19:27:59 +0000 (14:27 -0500)]
rtlwifi: Fix missing country code for Great Britain

commit 0c9d3491530773858ff9d705ec2a9c382f449230 upstream.

Some RTL8821AE devices sold in Great Britain have the country code of
0x25 encoded in their EEPROM. This value is not tested in the routine
that establishes the regulatory info for the chip. The fix is to set
this code to have the same capabilities as the EU countries. In addition,
the channels allowed for COUNTRY_CODE_ETSI were more properly suited
for China and Israel, not the EU. This problem has also been fixed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agortlwifi: Update regulatory database
Shao Fu [Fri, 15 May 2015 21:32:59 +0000 (16:32 -0500)]
rtlwifi: Update regulatory database

commit 02b5fffbe9e02f5d63fa4a801fb807cf0aab4fc9 upstream.

Driver rtlwifi maintains its own regulatory information, The Chrome Autotest
(https://www.chromium.org/chromium-os/testing/autotest-user-doc)
showed some errors. This patch adds the necessary information for rtlwifi.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agonetfilter: restart search if moved to other chain
Florian Westphal [Thu, 25 Aug 2016 13:33:29 +0000 (15:33 +0200)]
netfilter: restart search if moved to other chain

commit 95a8d19f28e6b29377a880c6264391a62e07fccc upstream.

In case nf_conntrack_tuple_taken did not find a conflicting entry
check that all entries in this hash slot were tested and restart
in case an entry was moved to another chain.

Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: ea781f197d6a ("netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Use NF_CT_STAT_INC(), not the _ATOMIC variant, since we disable BHs]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: trace full payload of all SAN records (req,resp,iels)
Steffen Maier [Wed, 10 Aug 2016 16:30:53 +0000 (18:30 +0200)]
zfcp: trace full payload of all SAN records (req,resp,iels)

commit aceeffbb59bb91404a0bda32a542d7ebf878433a upstream.

This was lost with commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
but is necessary for problem determination, e.g. to see the
currently active zone set during automatic port scan.

For the large GPN_FT response (4 pages), save space by not dumping
any empty residual entries.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: fix payload trace length for SAN request&response
Steffen Maier [Wed, 10 Aug 2016 16:30:52 +0000 (18:30 +0200)]
zfcp: fix payload trace length for SAN request&response

commit 94db3725f049ead24c96226df4a4fb375b880a77 upstream.

commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
started to add FC_CT_HDR_LEN which made zfcp dump random data
out of bounds for RSPN GS responses because u.rspn.rsp
is the largest and last field in the union of struct zfcp_fc_req.
Other request/response types only happened to stay within bounds
due to the padding of the union or
due to the trace capping of u.gspn.rsp to ZFCP_DBF_SAN_MAX_PAYLOAD.

Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : ...
Record id      : 2
Tag            : fsscth2
Request id     : 0x...
Destination ID : 0x00fffffc
Payload short  : 01000000 fc020000 80020000 00000000
                 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx <===
                 00000000 00000000 00000000 00000000
Payload length : 32                                  <===

struct zfcp_fc_req {
    [0] struct zfcp_fsf_ct_els ct_els;
   [56] struct scatterlist sg_req;
   [96] struct scatterlist sg_rsp;
        union {
            struct {req; rsp;} adisc;    SIZE: 28+28=   56
            struct {req; rsp;} gid_pn;   SIZE: 24+20=   44
            struct {rspsg; req;} gpn_ft; SIZE: 40*4+20=180
            struct {req; rsp;} gspn;     SIZE: 20+273= 293
            struct {req; rsp;} rspn;     SIZE: 277+16= 293
  [136] } u;
}
SIZE: 432

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: fix D_ID field with actual value on tracing SAN responses
Steffen Maier [Wed, 10 Aug 2016 16:30:51 +0000 (18:30 +0200)]
zfcp: fix D_ID field with actual value on tracing SAN responses

commit 771bf03537ddfa4a4dde62ef9dfbc82e4f77ab20 upstream.

With commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
we lost the N_Port-ID where an ELS response comes from.
With commit 7c7dc196814b9e1d5cc254dc579a5fa78ae524f7
("[SCSI] zfcp: Simplify handling of ct and els requests")
we lost the N_Port-ID where a CT response comes from.
It's especially useful if the request SAN trace record
with D_ID was already lost due to trace buffer wrap.

GS uses an open WKA port handle and ELS just a D_ID, and
only for ELS we could get D_ID from QTCB bottom via zfcp_fsf_req.
To cover both cases, add a new field to zfcp_fsf_ct_els
and fill it in on request to use in SAN response trace.
Strictly speaking the D_ID on SAN response is the FC frame's S_ID.
We don't need a field for the other end which is always us.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Fixes: 7c7dc196814b ("[SCSI] zfcp: Simplify handling of ct and els requests")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: restore tracing of handle for port and LUN with HBA records
Steffen Maier [Wed, 10 Aug 2016 16:30:50 +0000 (18:30 +0200)]
zfcp: restore tracing of handle for port and LUN with HBA records

commit 7c964ffe586bc0c3d9febe9bf97a2e4b2866e5b7 upstream.

This information was lost with
commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
but is required to debug e.g. invalid handle situations.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: trace on request for open and close of WKA port
Steffen Maier [Wed, 10 Aug 2016 16:30:49 +0000 (18:30 +0200)]
zfcp: trace on request for open and close of WKA port

commit d27a7cb91960cf1fdd11b10071e601828cbf4b1f upstream.

Since commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
HBA records no longer contain WWPN, D_ID, or LUN
to reduce duplicate information which is already in REC records.
In contrast to "regular" target ports, we don't use recovery to open
WKA ports such as directory/nameserver, so we don't get REC records.
Therefore, introduce pseudo REC running records without any
actual recovery action but including D_ID of WKA port on open/close.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: restore: Dont use 0 to indicate invalid LUN in rec trace
Steffen Maier [Wed, 10 Aug 2016 16:30:48 +0000 (18:30 +0200)]
zfcp: restore: Dont use 0 to indicate invalid LUN in rec trace

commit 0102a30a6ff60f4bb4c07358ca3b1f92254a6c25 upstream.

bring back
commit d21e9daa63e009ce5b87bbcaa6d11ce48e07bbbe
("[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace")
which was lost with
commit ae0904f60fab7cb20c48d32eefdd735e478b91fb
("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.")

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: retain trace level for SCSI and HBA FSF response records
Steffen Maier [Wed, 10 Aug 2016 16:30:47 +0000 (18:30 +0200)]
zfcp: retain trace level for SCSI and HBA FSF response records

commit 35f040df97fa0e94c7851c054ec71533c88b4b81 upstream.

While retaining the actual filtering according to trace level,
the following commits started to write such filtered records
with a hardcoded record level of 1 instead of the actual record level:
commit 250a1352b95e1db3216e5c5d4f4365bea5122f4a
("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")

Now we can distinguish written records again for offline level filtering.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 250a1352b95e ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: close window with unblocked rport during rport gone
Steffen Maier [Wed, 10 Aug 2016 16:30:46 +0000 (18:30 +0200)]
zfcp: close window with unblocked rport during rport gone

commit 4eeaa4f3f1d6c47b69f70e222297a4df4743363e upstream.

On a successful end of reopen port forced,
zfcp_erp_strategy_followup_success() re-uses the port erp_action
and the subsequent zfcp_erp_action_cleanup() now
sees ZFCP_ERP_SUCCEEDED with
erp_action->action==ZFCP_ERP_ACTION_REOPEN_PORT
instead of ZFCP_ERP_ACTION_REOPEN_PORT_FORCED
but must not perform zfcp_scsi_schedule_rport_register().

We can detect this because the fresh port reopen erp_action
is in its very first step ZFCP_ERP_STEP_UNINITIALIZED.

Otherwise this opens a time window with unblocked rport
(until the followup port reopen recovery would block it again).
If a scsi_cmnd timeout occurs during this time window
fc_timed_out() cannot work as desired and such command
would indeed time out and trigger scsi_eh. This prevents
a clean and timely path failover.
This should not happen if the path issue can be recovered
on FC transport layer such as path issues involving RSCNs.

Also, unnecessary and repeated DID_IMM_RETRY for pending and
undesired new requests occur because internally zfcp still
has its zfcp_port blocked.

As follow-on errors with scsi_eh, it can cause,
in the worst case, permanently lost paths due to one of:
sd <scsidev>: [<scsidisk>] Medium access timeout failure. Offlining disk!
sd <scsidev>: Device offlined - not ready after error recovery

For fix validation and to aid future debugging with other recoveries
we now also trace (un)blocking of rports.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 5767620c383a ("[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED")
Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI")
Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable")
Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: fix ELS/GS request&response length for hardware data router
Steffen Maier [Wed, 10 Aug 2016 16:30:45 +0000 (18:30 +0200)]
zfcp: fix ELS/GS request&response length for hardware data router

commit 70369f8e15b220f50a16348c79a61d3f7054813c upstream.

In the hardware data router case, introduced with kernel 3.2
commit 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router")
the ELS/GS request&response length needs to be initialized
as in the chained SBAL case.

Otherwise, the FCP channel rejects ELS requests with
FSF_REQUEST_SIZE_TOO_LARGE.

Such ELS requests can be issued by user space through BSG / HBA API,
or zfcp itself uses ADISC ELS for remote port link test on RSCN.
The latter can cause a short path outage due to
unnecessary remote target port recovery because the always
failing ADISC cannot detect extremely short path interruptions
beyond the local FCP channel.

Below example is decoded with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : zfcp_dbf_san_req+0408
Record id      : 1
Tag            : fssels1
Request id     : 0x<reqid>
Destination ID : 0x00<target d_id>
Payload info   : 52000000 00000000 <our wwpn       >           [ADISC]
                 <our wwnn       > 00<s_id> 00000000
                 00000000 00000000 00000000 00000000

Timestamp      : ...
Area           : HBA
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : zfcp_dbf_hba_fsf_res+0740
Record id      : 1
Tag            : fs_ferr
Request id     : 0x<reqid>
Request status : 0x00000010
FSF cmnd       : 0x0000000b               [FSF_QTCB_SEND_ELS]
FSF sequence no: 0x...
FSF issued     : ...
FSF stat       : 0x00000061   [FSF_REQUEST_SIZE_TOO_LARGE]
FSF stat qual  : 00000000 00000000 00000000 00000000
Prot stat      : 0x00000100
Prot stat qual : 00000000 00000000 00000000 00000000

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agozfcp: fix fc_host port_type with NPIV
Steffen Maier [Wed, 10 Aug 2016 16:30:44 +0000 (18:30 +0200)]
zfcp: fix fc_host port_type with NPIV

commit bd77befa5bcff8c51613de271913639edf85fbc2 upstream.

For an NPIV-enabled FCP device, zfcp can erroneously show
"NPort (fabric via point-to-point)" instead of "NPIV VPORT"
for the port_type sysfs attribute of the corresponding
fc_host.
s390-tools that can be affected are dbginfo.sh and ziomon.

zfcp_fsf_exchange_config_evaluate() ignores
fsf_qtcb_bottom_config.connection_features indicating NPIV
and only sets fc_host_port_type to FC_PORTTYPE_NPORT if
fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC.

Only the independent zfcp_fsf_exchange_port_evaluate()
evaluates connection_features to overwrite fc_host_port_type
to FC_PORTTYPE_NPIV in case of NPIV.
Code was introduced with upstream kernel 2.6.30
commit 0282985da5923fa6365adcc1a1586ae0c13c1617
("[SCSI] zfcp: Report fc_host_port_type as NPIV").

This works during FCP device recovery (such as set online)
because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by
FSF_QTCB_EXCHANGE_PORT_DATA in sequence.

However, the zfcp-specific scsi host sysfs attributes
"requests", "megabytes", or "seconds_active" trigger only
zfcp_fsf_exchange_config_evaluate() resetting fc_host
port_type to FC_PORTTYPE_NPORT despite NPIV.

The zfcp-specific scsi host sysfs attribute "utilization"
triggers only zfcp_fsf_exchange_port_evaluate() correcting
the fc_host port_type again in case of NPIV.

Evaluate fsf_qtcb_bottom_config.connection_features
in zfcp_fsf_exchange_config_evaluate() where it belongs to.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 0282985da592 ("[SCSI] zfcp: Report fc_host_port_type as NPIV")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
4 years agofbdev/efifb: Fix 16 color palette entry calculation
Max Staudt [Mon, 13 Jun 2016 17:15:59 +0000 (19:15 +0200)]
fbdev/efifb: Fix 16 color palette entry calculation

commit d50b3f43db739f03fcf8c0a00664b3d2fed0496e upstream.

When using efifb with a 16-bit (5:6:5) visual, fbcon's text is rendered
in the wrong colors - e.g. text gray (#aaaaaa) is rendered as green
(#50bc50) and neighboring pixels have slightly different values
(such as #50bc78).

The reason is that fbcon loads its 16 color palette through
efifb_setcolreg(), which in turn calculates a 32-bit value to write
into memory for each palette index.
Until now, this code could only handle 8-bit visuals and didn't mask
overlapping values when ORing them.

With this patch, fbcon displays the correct colors when a qemu VM is
booted in 16-bit mode (in GRUB: "set gfxpayload=800x600x16").

Fixes: 7c83172b98e5 ("x86_64 EFI boot support: EFI frame buffer driver")  # v2.6.24+
Signed-off-by: Max Staudt <mstaudt@suse.de>
Acked-By: Peter Jones <pjones@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoLinux 3.2.84 v3.2.84
Ben Hutchings [Sun, 20 Nov 2016 01:01:45 +0000 (01:01 +0000)]
Linux 3.2.84

5 years agoext3: NULL dereference in ext3_evict_inode()
Dan Carpenter [Tue, 22 Nov 2011 08:00:20 +0000 (11:00 +0300)]
ext3: NULL dereference in ext3_evict_inode()

commit bcdd0c1600903e9222abfcde28947406020ccb5d upstream.

This is an fsfuzzer bug.  ->s_journal is set at the end of
ext3_load_journal() but we try to use it in the error handling from
ext3_get_journal() while it's still NULL.

[  337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024
[  337.040380] IP: [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.041687] PGD 0
[  337.043118] Oops: 0002 [#1] SMP
[  337.044483] CPU 3
[  337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan]
[  337.047633]
[  337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511    /RV411/RV511/E3511/S3511
[  337.051064] RIP: 0010:[<ffffffff816e6539>]  [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.052879] RSP: 0018:ffff8800b1d11ae8  EFLAGS: 00010282
[  337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000
[  337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024
[  337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000
[  337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000
[  337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8
[  337.063385] FS:  00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000
[  337.065110] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0
[  337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0)
[  337.073800] Stack:
[  337.075487]  ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000
[  337.077255]  ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250
[  337.078851]  ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31
[  337.080284] Call Trace:
[  337.081706]  [<ffffffff811f48cf>] log_start_commit+0x1f/0x40
[  337.083107]  [<ffffffff8119405d>] ext3_evict_inode+0x1fd/0x2a0
[  337.084490]  [<ffffffff81131e31>] evict+0xa1/0x1a0
[  337.085857]  [<ffffffff81132031>] iput+0x101/0x210
[  337.087220]  [<ffffffff811339d1>] iget_failed+0x21/0x30
[  337.088581]  [<ffffffff811905fc>] ext3_iget+0x15c/0x450
[  337.089936]  [<ffffffff8118b0c1>] ? ext3_rsv_window_add+0x81/0x100
[  337.091284]  [<ffffffff816df9a4>] ext3_get_journal+0x15/0xde
[  337.092641]  [<ffffffff811a2e9b>] ext3_fill_super+0xf2b/0x1c30
[  337.093991]  [<ffffffff810ddf7d>] ? register_shrinker+0x4d/0x60
[  337.095332]  [<ffffffff8111c112>] mount_bdev+0x1a2/0x1e0
[  337.096680]  [<ffffffff811a1f70>] ? ext3_setup_super+0x210/0x210
[  337.098026]  [<ffffffff8119a770>] ext3_mount+0x10/0x20
[  337.099362]  [<ffffffff8111cbee>] mount_fs+0x3e/0x1b0
[  337.100759]  [<ffffffff810eda1b>] ? __alloc_percpu+0xb/0x10
[  337.102330]  [<ffffffff81135385>] vfs_kern_mount+0x65/0xc0
[  337.103889]  [<ffffffff8113611f>] do_kern_mount+0x4f/0x100
[  337.105442]  [<ffffffff811378fc>] do_mount+0x19c/0x890
[  337.106989]  [<ffffffff810e8456>] ? memdup_user+0x46/0x90
[  337.108572]  [<ffffffff810e84f3>] ? strndup_user+0x53/0x70
[  337.110114]  [<ffffffff811383fb>] sys_mount+0x8b/0xe0
[  337.111617]  [<ffffffff816ed93b>] system_call_fastpath+0x16/0x1b
[  337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38
[  337.116588] RIP  [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.118260]  RSP <ffff8800b1d11ae8>
[  337.119998] CR2: 0000000000000024
[  337.188701] ---[ end trace c36d790becac1615 ]---

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoxenbus: don't look up transaction IDs for ordinary writes
Jan Beulich [Mon, 15 Aug 2016 15:02:38 +0000 (09:02 -0600)]
xenbus: don't look up transaction IDs for ordinary writes

commit 9a035a40f7f3f6708b79224b86c5777a3334f7ea upstream.

This should really only be done for XS_TRANSACTION_END messages, or
else at least some of the xenstore-* tools don't work anymore.

Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition")
Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ed Swierk <eswierk@skyportsystems.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>