net: unix socket code abuses csum_partial

commit 0a13404dd3bf4ea870e3d96270b5a382edca85c0 upstream.

The unix socket code is using the result of csum_partial to
hash into a lookup table:

unix_hash_fold(csum_partial(sunaddr, len, 0));

csum_partial is only guaranteed to produce something that can be
folded into a checksum, as its prototype explains:

 * returns a 32-bit number suitable for feeding into itself
 * or csum_tcpudp_magic

The 32bit value should not be used directly.

Depending on the alignment, the ppc64 csum_partial will return
different 32bit partial checksums that will fold into the same
16bit checksum.

This difference causes the following testcase (courtesy of
Gustavo) to sometimes fail:

#include <sys/socket.h>
#include <stdio.h>

int main()
{
int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);

int i = 1;
setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4);

struct sockaddr addr;
addr.sa_family = AF_LOCAL;
bind(fd, &addr, 2);

listen(fd, 128);

struct sockaddr_storage ss;
socklen_t sslen = (socklen_t)sizeof(ss);
getsockname(fd, (struct sockaddr*)&ss, &sslen);

fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);

if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){
perror(NULL);
return 1;
}
printf("OK\n");
return 0;
}

As suggested by davem, fix this by using csum_fold to fold the
partial 32bit checksum into a 16bit checksum before using it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mwifiex: copy AP's HT capability info correctly

commit c99b1861c232e1f641f13b8645e0febb3712cc71 upstream.

While preparing association request, intersection of device's HT
capability information and corresponding fields advertised by AP
is used.

This patch fixes an error while copying this field from AP's
beacon.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mac80211: clear sequence/fragment number in QoS-null frames

commit 864a6040f395464003af8dd0d8ca86fed19866d4 upstream.

Avoid leaking data by sending uninitialized memory and setting an
invalid (non-zero) fragment number (the sequence number is ignored
anyway) by setting the seq_ctrl field to zero.

Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics")
Fixes: ce662b44ce22 ("mac80211: send (QoS) Null if no buffered frames")
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.2: Drop change to mps_qos_null_get()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: usb-audio: Add quirk for Logitech Webcam C500

commit e805ca8b0a9b6c91099c0eaa4b160a1196a4ae25 upstream.

Logitech C500 (046d:0807) needs the same workaround like other
Logitech Webcams.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ocfs2: fix quota file corruption

commit 15c34a760630ca2c803848fba90ca0646a9907dd upstream.

Global quota files are accessed from different nodes.  Thus we cannot
cache offset of quota structure in the quota file after we drop our node
reference count to it because after that moment quota structure may be
freed and reallocated elsewhere by a different node resulting in
corruption of quota file.

Fix the problem by clearing dq_off when we are releasing dquot structure.
We also remove the DB_READ_B handling because it is useless -
DQ_ACTIVE_B is set iff DQ_READ_B is set.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracing: Do not add event files for modules that fail tracepoints

commit 45ab2813d40d88fc575e753c38478de242d03f88 upstream.

If a module fails to add its tracepoints due to module tainting, do not
create the module event infrastructure in the debugfs directory. As the events
will not work and worse yet, they will silently fail, making the user wonder
why the events they enable do not display anything.

Having a warning on module load and the events not visible to the users
will make the cause of the problem much clearer.

Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org
Fixes: 6d723736e472 "tracing/events: add support for modules to TRACE_EVENT"
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

can: flexcan: flexcan_remove(): add missing netif_napi_del()

commit d96e43e8fce28cf97df576a07af9d65657a41a6f upstream.

This patch adds the missing netif_napi_del() to the flexcan_remove() function.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails

commit 7e9e148af01ef388efb6e2490805970be4622792 upstream.

If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed,
this patch adds the missing cleanup.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

can: flexcan: fix shutdown: first disable chip, then all interrupts

commit 5be93bdda64e85450598c6e97f79fb8f6acf30e0 upstream.

When shutting down the CAN interface (ifconfig canX down) during high CAN bus
loads, the CAN core might hang and freeze the whole CPU.

This patch fixes the shutdown sequence by first disabling the CAN core then
disabling all interrupts.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

powerpc/crashdump : Fix page frame number check in copy_oldmem_page

commit f5295bd8ea8a65dc5eac608b151386314cb978f1 upstream.

In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.

This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.

This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cpuset: fix a race condition in __cpuset_node_allowed_softwall()

commit 99afb0fd5f05aac467ffa85c36778fec4396209b upstream.

It's not safe to access task's cpuset after releasing task_lock().
Holding callback_mutex won't help.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

perf: Fix hotplug splat

commit e3703f8cdfcf39c25c4338c3ad8e68891cca3731 upstream.

Drew Richardson reported that he could make the kernel go *boom* when hotplugging
while having perf events active.

It turned out that when you have a group event, the code in
__perf_event_exit_context() fails to remove the group siblings from
the context.

We then proceed with destroying and freeing the event, and when you
re-plug the CPU and try and add another event to that CPU, things go
*boom* because you've still got dead entries there.

Reported-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/n/tip-k6v5wundvusvcseqj1si0oz0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

perf/x86: Fix event scheduling

commit 26e61e8939b1fe8729572dabe9a9e97d930dd4f6 upstream.

Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures,
with perf WARN_ON()s triggering. He also provided traces of the failures.

This is I think the relevant bit:

>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_disable: x86_pmu_disable
>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_state: Events: {
>    pec_1076_warn-2804  [000] d...   147.926156: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
>    pec_1076_warn-2804  [000] d...   147.926158: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
>    pec_1076_warn-2804  [000] d...   147.926159: x86_pmu_state: }
>    pec_1076_warn-2804  [000] d...   147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1
>    pec_1076_warn-2804  [000] d...   147.926161: x86_pmu_state: Assignment: {
>    pec_1076_warn-2804  [000] d...   147.926162: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
>    pec_1076_warn-2804  [000] d...   147.926163: x86_pmu_state: }
>    pec_1076_warn-2804  [000] d...   147.926166: collect_events: Adding event: 1 (ffff880119ec8800)

So we add the insn:p event (fd[23]).

At this point we should have:

  n_events = 2, n_added = 1, n_txn = 1

>    pec_1076_warn-2804  [000] d...   147.926170: collect_events: Adding event: 0 (ffff8800c9e01800)
>    pec_1076_warn-2804  [000] d...   147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00)

We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]).
These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so
that's not visible.

group_sched_in()
  pmu->start_txn() /* nop - BP pmu */
  event_sched_in()
     event->pmu->add()

So here we should end up with:

  0: n_events = 3, n_added = 2, n_txn = 2
  4: n_events = 4, n_added = 3, n_txn = 3

But seeing the below state on x86_pmu_enable(), the must have failed,
because the 0 and 4 events aren't there anymore.

Looking at group_sched_in(), since the BP is the leader, its
event_sched_in() must have succeeded, for otherwise we would not have
seen the sibling adds.

But since neither 0 or 4 are in the below state; their event_sched_in()
must have failed; but I don't see why, the complete state: 0,0,1:p,4
fits perfectly fine on a core2.

However, since we try and schedule 4 it means the 0 event must have
succeeded!  Therefore the 4 event must have failed, its failure will
have put group_sched_in() into the fail path, which will call:

event_sched_out()
  event->pmu->del()

on 0 and the BP event.

Now x86_pmu_del() will reduce n_events; but it will not reduce n_added;
giving what we see below:

 n_event = 2, n_added = 2, n_txn = 2

>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_enable: x86_pmu_enable
>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_state: Events: {
>    pec_1076_warn-2804  [000] d...   147.926179: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
>    pec_1076_warn-2804  [000] d...   147.926181: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
>    pec_1076_warn-2804  [000] d...   147.926182: x86_pmu_state: }
>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2
>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: Assignment: {
>    pec_1076_warn-2804  [000] d...   147.926186: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state:   1->0 tag: 1 config: 1 (ffff880119ec8800)
>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state: }
>    pec_1076_warn-2804  [000] d...   147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0

So the problem is that x86_pmu_del(), when called from a
group_sched_in() that fails (for whatever reason), and without x86_pmu
TXN support (because the leader is !x86_pmu), will corrupt the n_added
state.

Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sched: Fix double normalization of vruntime

commit 791c9e0292671a3bfa95286bb5c08129d8605618 upstream.

dequeue_entity() is called when p->on_rq and sets se->on_rq = 0
which appears to guarentee that the !se->on_rq condition is met.
If the task has done set_current_state(TASK_INTERRUPTIBLE) without
schedule() the second condition will be met and vruntime will be
incorrectly adjusted twice.

In certain cases this can result in the task's vruntime never increasing
past the vruntime of other tasks on the CFS' run queue, starving them of
CPU time.

This patch changes switched_from_fair() to use !p->on_rq instead of
!se->on_rq.

I'm able to cause a task with a priority of 120 to starve all other
tasks with the same priority on an ARM platform running 3.2.51-rt72
PREEMPT RT by writing one character at time to a serial tty (16550 UART)
in a tight loop. I'm also able to verify making this change corrects the
problem on that platform and kernel version.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392767811-28916-1-git-send-email-george.mccollister@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

genirq: Remove racy waitqueue_active check

commit c685689fd24d310343ac33942e9a54a974ae9c43 upstream.

We hit one rare case below:

T1 calling disable_irq(), but hanging at synchronize_irq()
always;
The corresponding irq thread is in sleeping state;
And all CPUs are in idle state;

After analysis, we found there is one possible scenerio which
causes T1 is waiting there forever:
CPU0                                       CPU1
 synchronize_irq()
  wait_event()
    spin_lock()
                                           atomic_dec_and_test(&threads_active)
      insert the __wait into queue
    spin_unlock()
                                           if(waitqueue_active)
    atomic_read(&threads_active)
                                             wake_up()

Here after inserted the __wait into queue on CPU0, and before
test if queue is empty on CPU1, there is no barrier, it maybe
cause it is not visible for CPU1 immediately, although CPU0 has
updated the queue list.
It is similar for CPU0 atomic_read() threads_active also.

So we'd need one smp_mb() before waitqueue_active.that, but removing
the waitqueue_active() check solves it as wel l and it makes
things simple and clear.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: Xiaoming Wang <xiaoming.wang@intel.com>
Link: http://lkml.kernel.org/r/1393212590-32543-1-git-send-email-chuansheng.liu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2: The corresponding check is in irq_thread()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iwlwifi: fix TX status for aggregated packets

commit 143582c6847cb285b361804c613127c25de60ca4 upstream.

Only the first packet is currently handled correctly, but then
all others are assumed to have failed which is problematic. Fix
this, marking them all successful instead (since if they're not
then the firmware will have transmitted them as single frames.)

This fixes the lost packet reporting.

Also do a tiny variable scoping cleanup.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[Add the dvm part]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[bwh: Backported to 3.2:
 - Drop the mvm part
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ASoC: sta32x: Fix wrong enum for limiter2 release rate

commit b3619b288b621e63f66908045f48495869a996a6 upstream.

There is a typo in the Limiter2 Release Rate control, a wrong enum for
Limiter1 is assigned.  It must point to Limiter2.
Spotted by a compile warning:

In file included from sound/soc/codecs/sta32x.c:34:0:
sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable]
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
                             ^
include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’
  struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
                  ^
sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
        ^

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: ehci: fix deadlock when threadirqs option is used

commit a1227f3c1030e96ebc51d677d2f636268845c5fb upstream.

ehci_irq() and ehci_hrtimer_func() can deadlock on ehci->lock when
threadirqs option is used. To prevent the deadlock use
spin_lock_irqsave() in ehci_irq().

This change can be reverted when hrtimer callbacks become threaded.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: ftdi_sio: add Cressi Leonardo PID

commit 6dbd46c849e071e6afc1e0cad489b0175bca9318 upstream.

Hello,

the following patch adds an entry for the PID of a Cressi Leonardo
diving computer interface to kernel 3.13.0.
It is detected as FT232RL.
Works with subsurface.

Signed-off-by: Joerg Dorchain <joerg@dorchain.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: ftdi_sio: add id for Z3X Box device

commit e1466ad5b1aeda303f9282463d55798d2eda218c upstream.

Custom VID/PID for Z3X Box device, popular tool for cellphone flashing.

Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ACPI / processor: Rework processor throttling with work_on_cpu()

commit f3ca4164529b875374c410193bbbac0ee960895f upstream.

acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make
sure that the (struct acpi_processor)->acpi_processor_set_throttling()
callback will run on the right CPU.  However, the function may be
called from a worker thread already bound to a different CPU in which
case that won't work.

Make acpi_processor_set_throttling() use work_on_cpu() as appropriate
instead of abusing set_cpus_allowed_ptr().

Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ioat: fix tasklet tear down

commit da87ca4d4ca101f177fffd84f1f0a5e4c0343557 upstream.

Since commit 77873803363c "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case.  As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up.  A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources().  Only
->alloc_chan_resources() can clear this condition in affected kernels.

This problem has been present since commit 3e037454bcfa "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs.  For now, just tear down the irq and tasklet properly by:

1/ Disable the irq from triggering the tasklet

2/ Disable the irq from re-arming

3/ Flush inflight interrupts

4/ Flush the timer

5/ Flush inflight tasklets

References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Mike Galbraith <bitbucket@online.de>
Reported-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Tested-by: Mike Galbraith <bitbucket@online.de>
Tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[bwh: Backported to 3.2:
 - Adjust context
 - As there is no ioatdma_device::irq_mode member, check
   pci_dev::msix_enabled instead]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Dan Williams <dan.j.williams@intel.com>

i7300_edac: Fix device reference count

commit 75135da0d68419ef8a925f4c1d5f63d8046e314d upstream.

pci_get_device() decrements the reference count of "from" (last
argument) so when we break off the loop successfully we have only one
device reference - and we don't know which device we have. If we want
a reference to each device, we must take them explicitly and let
the pci_get_device() walk complete to avoid duplicate references.

This is serious, as over-putting device references will cause
the device to eventually disappear. Without this fix, the kernel
crashes after a few insmod/rmmod cycles.

Tested on an Intel S7000FC4UR system with a 7300 chipset.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

i7core_edac: Fix PCI device reference count

commit c0f5eeed0f4cef4f05b74883a7160e7edde58b6a upstream.

The reference count changes done by pci_get_device can be a little
misleading when the usage diverges from the most common scheme. The
reference count of the device passed as the last parameter is always
decreased, even if the function returns no new device. So if we are
going to try alternative device IDs, we must manually increment the
device reference count before each retry. If we don't, we end up
decreasing the reference count, and after a few modprobe/rmmod cycles
the PCI devices will vanish.

In other words and as Alan put it: without this fix the EDAC code
corrupts the PCI device list.

This fixes kernel bug #50491:
https://bugzilla.kernel.org/show_bug.cgi?id=50491

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare
Reviewed-by: Alan Cox <alan@linux.intel.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

quota: Fix race between dqput() and dquot_scan_active()

commit 1362f4ea20fa63688ba6026e586d9746ff13a846 upstream.

Currently last dqput() can race with dquot_scan_active() causing it to
call callback for an already deactivated dquot. The race is as follows:

CPU1 CPU2
  dqput()
    spin_lock(&dq_list_lock);
    if (atomic_read(&dquot->dq_count) > 1) {
     - not taken
    if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
      spin_unlock(&dq_list_lock);
      ->release_dquot(dquot);
        if (atomic_read(&dquot->dq_count) > 1)
         - not taken
  dquot_scan_active()
    spin_lock(&dq_list_lock);
    if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
     - not taken
    atomic_inc(&dquot->dq_count);
    spin_unlock(&dq_list_lock);
        - proceeds to release dquot
    ret = fn(dquot, priv);
     - called for inactive dquot

Fix the problem by making sure possible ->release_dquot() is finished by
the time we call the callback and new calls to it will notice reference
dquot_scan_active() has taken and bail out.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k: Fix ETSI compliance for AR9462 2.0

commit b3050248c167871ca52cfdb2ce78aa2460249346 upstream.

The minimum CCA power threshold values have to be adjusted
for existing cards to be in compliance with new regulations.
Newer cards will make use of the values obtained from EEPROM,
support for this was added earlier. To make sure that cards
that are already in use and don't have proper values in EEPROM,
do not violate regulations, use the initvals instead.

Reported-by: Jeang Daniel <dyjeong@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k: protect tid->sched check

commit 21f8aaee0c62708654988ce092838aa7df4d25d8 upstream.

We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That
is race condition which can result of doing list_del(&tid->list) twice
(second time with poisoned list node) and cause crash like shown below:

[424271.637220] BUG: unable to handle kernel paging request at 00100104
[424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k]
...
[424271.639953] Call Trace:
[424271.639998]  [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k]
[424271.640083]  [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k]
[424271.640177]  [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211]
[424271.640258]  [<c10f730e>] ? free_compound_page+0x2e/0x40
[424271.640346]  [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211]
[424271.640437]  [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0
[424271.640510]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640578]  [<c10fc23c>] ? put_page+0x2c/0x40
[424271.640640]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640706]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640787]  [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211]
[424271.640897]  [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211]
[424271.641009]  [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211]
[424271.641104]  [<c13846ce>] ? ip_output+0x7e/0xd0
[424271.641182]  [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211]
[424271.641266]  [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k]
[424271.641358]  [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211]
[424271.641445]  [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k]

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=70551

Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Use spin_unlock_bh() directly]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

SELinux: bigendian problems with filename trans rules

commit 9085a6422900092886da8c404e1c5340c4ff1cbf upstream.

When writing policy via /sys/fs/selinux/policy I wrote the type and class
of filename trans rules in CPU endian instead of little endian.  On
x86_64 this works just fine, but it means that on big endian arch's like
ppc64 and s390 userspace reads the policy and converts it from
le32_to_cpu.  So the values are all screwed up.  Write the values in le
format like it should have been to start.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mac80211: fix AP powersave TX vs. wakeup race

commit 1d147bfa64293b2723c4fec50922168658e613ba upstream.

There is a race between the TX path and the STA wakeup: while
a station is sleeping, mac80211 buffers frames until it wakes
up, then the frames are transmitted. However, the RX and TX
path are concurrent, so the packet indicating wakeup can be
processed while a packet is being transmitted.

This can lead to a situation where the buffered frames list
is emptied on the one side, while a frame is being added on
the other side, as the station is still seen as sleeping in
the TX path.

As a result, the newly added frame will not be send anytime
soon. It might be sent much later (and out of order) when the
station goes to sleep and wakes up the next time.

Additionally, it can lead to the crash below.

Fix all this by synchronising both paths with a new lock.
Both path are not fastpath since they handle PS situations.

In a later patch we'll remove the extra skb queue locks to
reduce locking overhead.

BUG: unable to handle kernel
NULL pointer dereference at 000000b0
IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
*pde = 00000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1
EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000
ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000)
iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9
Stack:
 e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0
 ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210
 ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002
Call Trace:
 [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211]
 [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211]
 [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211]
 [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211]
 [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211]
 [<c149ef70>] dev_hard_start_xmit+0x450/0x950
 [<c14b9aa9>] sch_direct_xmit+0xa9/0x250
 [<c14b9c9b>] __qdisc_run+0x4b/0x150
 [<c149f732>] dev_queue_xmit+0x2c2/0xca0

Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
[reword commit log, use a separate lock]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ASoC: wm8770: Fix wrong number of enum items

commit 7a6c0a58dc824523966f212c76322d47c5b0e6fe upstream.

wm8770 codec driver defines ain_enum with a wrong number of items.

Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ACPI / video: Filter the _BCL table for duplicate brightness values

commit bd8ba20597f0cfef3ef65c3fd2aa92ab23d4c8e1 upstream.

Some devices have duplicate entries in there brightness levels table, ie
on my Dell Latitude E6430 the table looks like this:

[    3.686060] acpi backlight index   0, val 80
[    3.686095] acpi backlight index   1, val 50
[    3.686122] acpi backlight index   2, val 5
[    3.686147] acpi backlight index   3, val 5
[    3.686172] acpi backlight index   4, val 5
[    3.686197] acpi backlight index   5, val 5
[    3.686223] acpi backlight index   6, val 5
[    3.686248] acpi backlight index   7, val 5
[    3.686273] acpi backlight index   8, val 6
[    3.686332] acpi backlight index   9, val 7
[    3.686356] acpi backlight index  10, val 8
[    3.686380] acpi backlight index  11, val 9
etc.

Notice that brightness values 0-5 are all mapped to 5. This means that
if userspace writes any value between 0 and 5 to the brightness sysfs attribute
and then reads it, it will always return 0, which is somewhat unexpected.

This is a problem for ie gnome-settings-daemon, which uses read-modify-write
logic when the users presses the brightness up or down keys. This is done
this way to take brightness changes from other sources into account.

On this specific laptop what happens once the brightness has been set to 0,
is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press
again reads 0, so things get stuck at the lowest brightness setting.

Filtering out the duplicate table entries, makes any write to brightness
read back as the written value as one would expect, fixing this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ASoC: sta32x: Fix array access overflow

commit 025c3fa9256d4c54506b7a29dc3befac54f5c68d upstream.

Preset EQ enum of sta32x codec driver declares too many number of
items and it may lead to the access over the actual array size.

Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hwmon: (max1668) Fix writing the minimum temperature

commit 500a91571f0a5d0d3242d83802ea2fd1faccc66e upstream.

When trying to set the minimum temperature, the driver was erroneously
writing the maximum temperature into the chip.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cgroup: update cgroup_enable_task_cg_lists() to grab siglock

commit 532de3fc72adc2a6525c4d53c07bf81e1732083d upstream.

Currently, there's nothing preventing cgroup_enable_task_cg_lists()
from missing set PF_EXITING and race against cgroup_exit().  Depending
on the timing, cgroup_exit() may finish with the task still linked on
css_set leading to list corruption.  Fix it by grabbing siglock in
cgroup_enable_task_cg_lists() so that PF_EXITING is guaranteed to be
visible.

This whole on-demand cg_list optimization is extremely fragile and has
ample possibility to lead to bugs which can cause things like
once-a-year oops during boot.  I'm wondering whether the better
approach would be just adding "cgroup_disable=all" handling which
disables the whole cgroup rather than tempting fate with this
on-demand craziness.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

workqueue: ensure @task is valid across kthread_stop()

commit 5bdfff96c69a4d5ab9c49e60abf9e070ecd2acbb upstream.

When a kworker should die, the kworkre is notified through WORKER_DIE
flag instead of kthread_should_stop().  This, IIRC, is primarily to
keep the test synchronized inside worker_pool lock.  WORKER_DIE is
first set while holding pool->lock, the lock is dropped and
kthread_stop() is called.

Unfortunately, this means that there's a slight chance that the target
kworker may see WORKER_DIE before kthread_stop() finishes and exits
and frees the target task before or during kthread_stop().

Fix it by pinning the target task before setting WORKER_DIE and
putting it after kthread_stop() is done.

tj: Improved patch description and comment.  Moved pinning above
    WORKER_DIE for better signify what it's protecting.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8

commit 12df84d4a80278a5b1abfec3206795291da52fc9 upstream.

This interface is to be handled by the qmi_wwan driver.

CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
CC: Christian Schmiedl <christian.schmiedl@gemalto.com>
CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com>
CC: David McCullough <david.mccullough@accelecon.com>
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: EHCI: add delay during suspend to prevent erroneous wakeups

commit 3e8d6d85adedc59115a564c0a54b36e42087c4d9 upstream.

High-speed USB connections revert back to full-speed signalling when
the device goes into suspend.  This takes several milliseconds, and
during that time it's not possible to tell reliably whether the device
has been disconnected.

On some platforms, the Wake-On-Disconnect circuitry gets confused
during this intermediate state.  It generates a false wakeup signal,
which can prevent the controller from going to sleep.

To avoid this problem, this patch adds a 5-ms delay to the
ehci_bus_suspend() routine if any ports have to switch over to
full-speed signalling.  (Actually, the delay was already present for
devices using a particular kind of PHY power management; the patch
merely causes the delay to be used more widely.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Peter Chen <Peter.Chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - s/has_tdi_phy_lpm/has_hostpc/
 - Always re-lock ehci->lock after the sleep]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ahci: disable NCQ on Samsung pci-e SSDs on macbooks

commit 67809f85d31eac600f6b28defa5386c9d2a13b1d upstream.

Samsung's pci-e SSDs with device ID 0x1600 which are found on some
macbooks time out on NCQ commands.  Blacklist NCQ on the device so
that the affected machines can at least boot.

Original-patch-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60731
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: 7957/1: add DSB after icache flush in __flush_icache_all()

commit 39544ac9df20f73e49fc6b9ac19ff533388c82c0 upstream.

Add DSB after icache flush to complete the cache maintenance operation.

Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 use

commit 8d80390cfc9434d5aa4fb9e5f9768a66b30cb8a6 upstream.

For avr32 cross compiler, do not define '__linux__' internally, so it
will cause issue with allmodconfig.

The related error:

    CC [M]  fs/coda/psdev.o
  In file included from include/linux/coda.h:64,
                   from fs/coda/psdev.c:45:
  include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t'

The related toolchain version (which only download, not re-compile):

  [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v
  Using built-in specs.
  Target: avr32
  Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www
.atmel.com/avr
  Thread model: single
  gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435)

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

avr32: fix missing module.h causing build failure in mimc200/fram.c

commit 5745d6a41a4f4aec29e2ccd591c6fb09ed73a955 upstream.

Causing this:

In file included from arch/avr32/boards/mimc200/fram.c:13:
include/linux/miscdevice.h:51: error: field 'list' has incomplete type
include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t'
arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function)

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: usb-audio: work around KEF X300A firmware bug

commit 624aef494f86ed0c58056361c06347ad62b26806 upstream.

When the driver tries to access Function Unit 10, the KEF X300A
speakers' firmware apparently locks up, making even PCM streaming
impossible.  Work around this by ignoring this FU.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dma: ste_dma40: don't dereference free:d descriptor

commit e9baa9d9d520fb0e24cca671e430689de2d4a4b2 upstream.

It appears that in the DMA40 driver the DMA tasklet will very
often dereference memory for a descriptor just free:d from the
DMA40 slab. Nothing happens because no other part of the driver
has yet had a chance to claim this memory, but it's really
nasty to dereference free:d memory, so let's check the flag
before the descriptor is free and store it in a bool variable.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ext4: don't leave i_crtime.tv_sec uninitialized

commit 19ea80603715d473600cd993b9987bc97d042e02 upstream.

If the i_crtime field is not present in the inode, don't leave the
field uninitialized.

Fixes: ef7f38359 ("ext4: Add nanosecond timestamps")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

PCI: Enable INTx if BIOS left them disabled

commit 1f42db786b14a31bf807fc41ee5583a00c08fcb1 upstream.

Some firmware leaves the Interrupt Disable bit set even if the device uses
INTx interrupts.  Clear Interrupt Disable so we get those interrupts.

Based on the report mentioned below, if the user selects the "EHCI only"
option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS
with the PCI_COMMAND_INTX_DISABLE bit set.

Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601
Reported-by: Chris Cheng <chris.cheng@atrustcorp.com>
Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

EDAC: Correct workqueue setup path

commit cb6ef42e516cb8948f15e4b70dc03af8020050a2 upstream.

We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.

On that second path we don't need to init the workqueue which has been
initialized already.

Thanks to Tejun for workqueue insights.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

IB/qib: Add missing serdes init sequence

commit 2f75e12c4457a9b3d042c0a0d748fa198dc2ffaf upstream.

Research has shown that commit a77fcf895046 ("IB/qib: Use a single
txselect module parameter for serdes tuning") missed a key serdes init
sequence.

This patch add that sequence.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtl8187: fix regression on MIPS without coherent DMA

commit b6213e413a4e0c66548153516b074df14f9d08e0 upstream.

This patch fixes regression caused by commit a16dad77634 "MIPS: Fix
potencial corruption". That commit fixes one corruption scenario in
cost of adding another one, which actually start to cause crashes
on Yeeloong laptop when rtl8187 driver is used.

For correct DMA read operation on machines without DMA coherence, kernel
have to invalidate cache, such it will refill later with new data that
device wrote to memory, when that data is needed to process. We can only
invalidate full cache line. Hence when cache line includes both dma
buffer and some other data (written in cache, but not yet in main
memory), the other data can not hit memory due to invalidation. That
happen on rtl8187 where struct rtl8187_priv fields are located just
before and after small buffers that are passed to USB layer and DMA
is performed on them.

To fix the problem we align buffers and reserve space after them to make
them match cache line.

This patch does not resolve all possible MIPS problems entirely, for
that we have to assure that we always map cache aligned buffers for DMA,
what can be complex or even not possible. But patch fixes visible and
reproducible regression and seems other possible corruptions do not
happen in practice, since Yeeloong laptop works stable without rtl8187
driver.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=54391

Reported-by: Petr Pisar <petr.pisar@atlas.cz>
Bisected-by: Tom Li <biergaizi2009@gmail.com>
Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Larry Finger <Larry.Finger@lwfinger.next>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

MIPS: Fix potencial corruption

commit a16dad7763420a3b46cff1e703a9070827796cfc upstream.

Normally r4k_dma_cache_inv should only ever be called with cacheline
aligned addresses.  If however, it isn't there is the theoretical
possibility of data corruption.  There is no correct way of handling this
and anyway, it should only happen if the DMA API is used incorrectly
so drop

There is a different corruption scenario with these CACHE instructions
removed but again there is no way of handling this correctly and it can
be triggered only through incorrect use of the DMA API.

So just get rid of the complexity.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: James Rodriguez <jamesr@juniper.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtlwifi: rtl8192ce: Fix too long disable of IRQs

commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 upstream.

rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans

The observable symptoms in dmesg can be:

- underruns from ALSA playback
- clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled):

[  250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100
[  250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable
[  250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10
[  250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1
[  250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32)
[  250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0
[  250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc
[  250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!!
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <===
[  250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1
[  250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3
[  250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1
[  250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore
[  251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505)

The exact code flow that causes that is:

1. wpa_supplicant send a start_scan request to the nl80211 driver
2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE
3.   rtl_ips_nic_on is called which disable local irqs
4.     rtl92c_phy_set_rf_power_state() is called
5.       rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled

A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled
but a quick and dirty solution that has proven to work is
to reenable the irqs during the function rtl92ce_hw_init().

I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed.

Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

lockd: send correct lock when granting a delayed lock.

commit 2ec197db1a56c9269d75e965f14c344b58b2a4f6 upstream.

If an NFS client attempts to get a lock (using NLM) and the lock is
not available, the server will remember the request and when the lock
becomes available it will send a GRANT request to the client to
provide the lock.

If the client already held an adjacent lock, the GRANT callback will
report the union of the existing and new locks, which can confuse the
client.

This happens because __posix_lock_file (called by vfs_lock_file)
updates the passed-in file_lock structure when adjacent or
over-lapping locks are found.

To avoid this problem we take a copy of the two fields that can
be changed (fl_start and fl_end) before the call and restore them
afterwards.
An alternate would be to allocate a 'struct file_lock', initialise it,
use locks_copy_lock() to take a copy, then locks_release_private()
after the vfs_lock_file() call.  But that is a lot more work.

Reported-by: Olaf Kirch <okir@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
--
v1 had a couple of issues (large on-stack struct and didn't really work properly).
This version is much better tested.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915/dp: add native aux defer retry limit

commit f51a44b9a6c4982cc25bfb3727de9bb893621ebc upstream.

Retrying indefinitely places too much trust on the aux implementation of
the sink devices.

Reported-by: Daniel Martin <consume.noise@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71267
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Sree Harsha Totakura <freedesktop@h.totakura.in>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915/dp: increase native aux defer retry timeout

commit 04eada25d1f72efdecd32d702706594f81de65d5 upstream.

Give more slack to sink devices before retrying on native aux
defer. AFAICT the 100 us timeout was not based on the DP spec.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

compiler/gcc4: Make quirk for asm_volatile_goto() unconditional

commit a9f180345f5378ac87d80ed0bea55ba421d83859 upstream.

I started noticing problems with KVM guest destruction on Linux
3.12+, where guest memory wasn't being cleaned up. I bisected it
down to the commit introducing the new 'asm goto'-based atomics,
and found this quirk was later applied to those.

Unfortunately, even with GCC 4.8.2 (which ostensibly fixed the
known 'asm goto' bug) I am still getting some kind of
miscompilation. If I enable the asm_volatile_goto quirk for my
compiler, KVM guests are destroyed correctly and the memory is
cleaned up.

So make the quirk unconditional for now, until bug is found
and fixed.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/1392274867-15236-1-git-send-email-steven@uplinklabs.net
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

md/raid5: Fix CPU hotplug callback registration

commit 789b5e0315284463617e106baad360cb9e8db3ac upstream.

Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:

get_online_cpus();

for_each_online_cpu(cpu)
init_cpu(cpu);

register_cpu_notifier(&foobar_cpu_notifier);

put_online_cpus();

This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).

Interestingly, the raid5 code can actually prevent double initialization and
hence can use the following simplified form of callback registration:

register_cpu_notifier(&foobar_cpu_notifier);

get_online_cpus();

for_each_online_cpu(cpu)
init_cpu(cpu);

put_online_cpus();

A hotplug operation that occurs between registering the notifier and calling
get_online_cpus(), won't disrupt anything, because the code takes care to
perform the memory allocations only once.

So reorganize the code in raid5 this way to fix the deadlock with callback
registration.

Cc: linux-raid@vger.kernel.org
Fixes: 36d1c6476be51101778882897b315bd928c8c7b5
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the
free_scratch_buffer() helper to condense code further and wrote the changelog.]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

block: add cond_resched() to potentially long running ioctl discard loop

commit c8123f8c9cb517403b51aa41c3c46ff5e10b2c17 upstream.

When mkfs issues a full device discard and the device only
supports discards of a smallish size, we can loop in
blkdev_issue_discard() for a long time. If preempt isn't enabled,
this can turn into a softlock situation and the kernel will
start complaining.

Add an explicit cond_resched() at the end of the loop to avoid
that.

Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: option: blacklist ZTE MF667 net interface

commit 3635c7e2d59f7861afa6fa5e87e2a58860ff514d upstream.

Interface #5 of 19d2:1270 is a net interface which has been submitted to the
qmi_wwan driver so consequently remove it from the option driver.

Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB

commit f66fab8e1cd6b3127ba4c5c0d11539fbe1de1e36 upstream.

According to BSpec the entire MI_DISPLAY_FLIP packet must be contained
in a single cacheline. Make sure that happens.

v2: Use intel_ring_begin_cacheline_safe()
v3: Use intel_ring_cacheline_align() (Chris)

Cc: Bjoern C <lkml@call-home.ch>
Cc: Alexandru DAMIAN <alexandru.damian@intel.com>
Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: Add intel_ring_cachline_align()

commit 753b1ad4a281b0663329409d410243e91825c323 upstream.

intel_ring_cachline_align() emits MI_NOOPs until the ring tail is
aligned to a cacheline boundary.

Cc: Bjoern C <lkml@call-home.ch>
Cc: Alexandru DAMIAN <alexandru.damian@intel.com>
Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ring-buffer: Fix first commit on sub-buffer having non-zero delta

commit d651aa1d68a2f0a7ee65697b04c6a92f8c0a12f2 upstream.

Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on
that page use a 27 bit delta against that timestamp in order to save on
bits written to the ring buffer. If the time between events is larger than
what the 27 bits can hold, a "time extend" event is added to hold the
entire 64 bit timestamp again and the events after that hold a delta from
that timestamp.

As a "time extend" is always paired with an event, it is logical to just
allocate the event with the time extend, to make things a bit more efficient.

Unfortunately, when the pairing code was written, it removed the "delta = 0"
from the first commit on a page, causing the events on the page to be
slightly skewed.

Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xen: install xen/gntdev.h and xen/gntalloc.h

commit 564eb714f5f09ac733c26860d5f0831f213fbdf1 upstream.

xen/gntdev.h and xen/gntalloc.h both provide userspace ABIs so they
should be installed.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[bwh: Backported to 3.2: no renaming is required]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

SUNRPC: Fix races in xs_nospace()

commit 06ea0bfe6e6043cb56a78935a19f6f8ebc636226 upstream.

When a send failure occurs due to the socket being out of buffer space,
we call xs_nospace() in order to have the RPC task wait until the
socket has drained enough to make it worth while trying again.
The current patch fixes a race in which the socket is drained before
we get round to setting up the machinery in xs_nospace(), and which
is reported to cause hangs.

Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown
Fixes: a9a6b52ee1ba (SUNRPC: Don't start the retransmission timer...)
Reported-by: Neil Brown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmem

commit 96c7a2ff21501691587e1ae969b83cbec8b78e08 upstream.

Recently due to a spike in connections per second memcached on 3
separate boxes triggered the OOM killer from accept.  At the time the
OOM killer was triggered there was 4GB out of 36GB free in zone 1.  The
problem was that alloc_fdtable was allocating an order 3 page (32KiB) to
hold a bitmap, and there was sufficient fragmentation that the largest
page available was 8KiB.

I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious
but I do agree that order 3 allocations are very likely to succeed.

There are always pathologies where order > 0 allocations can fail when
there are copious amounts of free memory available.  Using the pigeon
hole principle it is easy to show that it requires 1 page more than 50%
of the pages being free to guarantee an order 1 (8KiB) allocation will
succeed, 1 page more than 75% of the pages being free to guarantee an
order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of
the pages being free to guarantee an order 3 allocate will succeed.

A server churning memory with a lot of small requests and replies like
memcached is a common case that if anything can will skew the odds
against large pages being available.

Therefore let's not give external applications a practical way to kill
linux server applications, and specify __GFP_NORETRY to the kmalloc in
alloc_fdmem.  Unless I am misreading the code and by the time the code
reaches should_alloc_retry in __alloc_pages_slowpath (where
__GFP_NORETRY becomes signification).  We have already tried everything
reasonable to allocate a page and the only thing left to do is wait.  So
not waiting and falling back to vmalloc immediately seems like the
reasonable thing to do even if there wasn't a chance of triggering the
OOM killer.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Cong Wang <cwang@twopensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev

commit 7c8746a9eb287642deaad0e7c2cdf482dce5e4be upstream.

When unlocking a spinlock, we require the following, strictly ordered
sequence of events:

<barrier> /* dmb */
<unlock>
<barrier> /* dsb */
<sev>

Whilst the code does indeed reflect this in terms of the architecture,
the final <barrier> + <sev> have been contracted into a single inline
asm without a "memory" clobber, therefore the compiler is at liberty to
reorder the unlock to the end of the above sequence. In such a case,
a waiting CPU may be woken up before the lock has been unlocked, leading
to extremely poor performance.

This patch reworks the dsb_sev() function to make use of the dsb()
macro and ensure ordering against the unlock.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[bwh: Backported to 3.2: 'ishst' variant is not used here]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU

commit bae0ca2bc550d1ec6a118fb8f2696f18c4da3d8e upstream.

During __v{6,7}_setup, we invalidate the TLBs since we are about to
enable the MMU on return to head.S. Unfortunately, without a subsequent
dsb instruction, the invalidation is not guaranteed to have completed by
the time we write to the sctlr, potentially exposing us to junk/stale
translations cached in the TLB.

This patch reworks the init functions so that the dsb used to ensure
completion of cache/predictor maintenance is also used to ensure
completion of the TLB invalidation.

Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Modpost: fixed USB alias generation for ranges including 0x9 and 0xA

commit 03b56329f9bb5a1cb73d7dc659d529a9a9bf3acc upstream.

Commit afe2dab4f6 ("USB: add hex/bcd detection to usb modalias generation")
changed the routine that generates alias ranges. Before that change, only
digits 0-9 were supported; the commit tried to fix the case when the range
includes higher values than 0x9.

Unfortunately, the commit didn't fix the case when the range includes both
0x9 and 0xA, meaning that the final range must look like [x-9A-y] where
x <= 0x9 and y >= 0xA -- instead the [x-9A-x] range was produced.

Modprobe doesn't complain as it sees no difference between no-match and
bad-pattern results of fnmatch().

Fixing this simple bug to fix the aliases.
Also changing the hardcoded beginning of the range to uppercase as all the
other letters are also uppercase in the device version numbers.

Fortunately, this affects only the dvb-usb-dib0700 module, AFAIK.

Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xen-blkfront: handle backend CLOSED without CLOSING

commit 3661371701e714f0cea4120f6a365340858fb4e4 upstream.

Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED.  If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.

So, treat an unexpected backend CLOSED state the same as CLOSING.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

staging: comedi: adv_pci1710: fix analog output readback value

commit 1e85c1ea1ff2a60659e790ef8ec76c7339445841 upstream.

The last value written to a analog output channel is cached in the
private data of this driver for readback.

Currently, the wrong value is cached in the (*insn_write) functions.
The current code stores the data[n] value for readback afer the loop
has written all the values. At this time 'n' points past the end of
the data array.

Fix the functions by using a local variable to hold the data being
written to the analog output channel. This variable is then used
after the loop is complete to store the readback value. The current
value is retrieved before the loop in case no values are actually
written..

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tty: n_gsm: Fix for modems with brk in modem status control

commit 3ac06b905655b3ef2fd2196bab36e4587e1e4e4f upstream.

3GPP TS 07.10 states in section 5.4.6.3.7:
"The length byte contains the value 2 or 3 ... depending on the break
signal." The break byte is optional and if it is sent, the length is
3. In fact the driver was not able to work with modems that send this
break byte in their modem status control message. If the modem just
sends the break byte if it is really set, then weird things might
happen.
The code for deconding the modem status to the internal linux
presentation in gsm_process_modem has already a big comment about
this 2 or 3 byte length thing and it is already able to decode the
brk, but the code calling the gsm_process_modem function in
gsm_control_modem does not encode it and hand it over the right way.
This patch fixes this.
Without this fix if the modem sends the brk byte in it's modem status
control message the driver will hang when opening a muxed channel.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

raw: test against runtime value of max_raw_minors

commit 5bbb2ae3d6f896f8d2082d1eceb6131c2420b7cf upstream.

bind_get() checks the device number it is called with. It uses
MAX_RAW_MINORS for the upper bound. But MAX_RAW_MINORS is set at compile
time while the actual number of raw devices can be set at runtime. This
means the test can either be too strict or too lenient. And if the test
ends up being too lenient bind_get() might try to access memory beyond
what was allocated for "raw_devices".

So check against the runtime value (max_raw_minors) in this function.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Drivers: hv: vmbus: Don't timeout during the initial connection with host

commit 269f979467cf49f2ea8132316c1f00f8c9678f7c upstream.

When the guest attempts to connect with the host when there may already be a
connection with the host (as would be the case during the kdump/kexec path),
it is difficult to guarantee timely response from the host. Starting with
WS2012 R2, the host supports this ability to re-connect with the host
(explicitly to support kexec). Prior to responding to the guest, the host
needs to ensure that device states based on the previous connection to
the host have been properly torn down. This may introduce unbounded delays.
To deal with this issue, don't do a timed wait during the initial connect
with the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irq

commit 227d53b397a32a7614667b3ecaf1d89902fb6c12 upstream.

To use spin_{un}lock_irq is dangerous if caller disabled interrupt.
During aio buffer migration, we have a possibility to see the following
call stack.

aio_migratepage  [disable interrupt]
  migrate_page_copy
    clear_page_dirty_for_io
      set_page_dirty
        __set_page_dirty_buffers
          __set_page_dirty
            spin_lock_irq

This mean, current aio migration is a deadlockable.  spin_lock_irqsave
is a safer alternative and we should use it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Rientjes rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq()

commit a85d9df1ea1d23682a0ed1e100e6965006595d06 upstream.

During aio stress test, we observed the following lockdep warning.  This
mean AIO+numa_balancing is currently deadlockable.

The problem is, aio_migratepage disable interrupt, but
__set_page_dirty_nobuffers unintentionally enable it again.

Generally, all helper function should use spin_lock_irqsave() instead of
spin_lock_irq() because they don't know caller at all.

   other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(&(&ctx->completion_lock)->rlock);
     <Interrupt>
       lock(&(&ctx->completion_lock)->rlock);

    *** DEADLOCK ***

      dump_stack+0x19/0x1b
      print_usage_bug+0x1f7/0x208
      mark_lock+0x21d/0x2a0
      mark_held_locks+0xb9/0x140
      trace_hardirqs_on_caller+0x105/0x1d0
      trace_hardirqs_on+0xd/0x10
      _raw_spin_unlock_irq+0x2c/0x50
      __set_page_dirty_nobuffers+0x8c/0xf0
      migrate_page_copy+0x434/0x540
      aio_migratepage+0xb1/0x140
      move_to_new_page+0x7d/0x230
      migrate_pages+0x5e5/0x700
      migrate_misplaced_page+0xbc/0xf0
      do_numa_page+0x102/0x190
      handle_pte_fault+0x241/0x970
      handle_mm_fault+0x265/0x370
      __do_page_fault+0x172/0x5a0
      do_page_fault+0x1a/0x70
      page_fault+0x28/0x30

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm/swap: fix race on swap_info reuse between swapoff and swapon

commit f893ab41e4dae2fe8991faf5d86d029068d1ef3a upstream.

swapoff clear swap_info's SWP_USED flag prematurely and free its
resources after that.  A concurrent swapon will reuse this swap_info
while its previous resources are not cleared completely.

These late freed resources are:
 - p->percpu_cluster
 - swap_cgroup_ctrl[type]
 - block_device setting
 - inode->i_flags &= ~S_SWAPFILE

This patch clears the SWP_USED flag after all its resources are freed,
so that swapon can reuse this swap_info by alloc_swap_info() safely.

[akpm@linux-foundation.org: tidy up code comment]
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y

commit 6583327c4dd55acbbf2a6f25e775b28b3abf9a42 upstream.

Commit d61931d89b, "x86: Add optimized popcnt variants" introduced
compile flag -fcall-saved-rdi for lib/hweight.c. When combined with
options -fprofile-arcs and -O2, this flag causes gcc to generate
broken constructor code. As a result, a 64 bit x86 kernel compiled
with CONFIG_GCOV_PROFILE_ALL=y prints message "gcov: could not create
file" and runs into sproadic BUGs during boot.

The gcc people indicate that these kinds of problems are endemic when
using ad hoc calling conventions.  It is therefore best to treat any
file compiled with ad hoc calling conventions as an isolated
environment and avoid things like profiling or coverage analysis,
since those subsystems assume a "normal" calling conventions.

This patch avoids the bug by excluding lib/hweight.o from coverage
profiling.

Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/52F3A30C.7050205@linux.vnet.ibm.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

time: Fix overflow when HZ is smaller than 60

commit 80d767d770fd9c697e434fd080c2db7b5c60c6dd upstream.

When compiling for the IA-64 ski emulator, HZ is set to 32 because the
emulation is slow and we don't want to waste too many cycles processing
timers. Alpha also has an option to set HZ to 32.

This causes integer underflow in
kernel/time/jiffies.c:
kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  .mult  = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
  ^

This patch reduces the JIFFIES_SHIFT value to avoid the overflow.

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mac80211: fix fragmentation code, particularly for encryption

commit 338f977f4eb441e69bb9a46eaa0ac715c931a67f upstream.

The "new" fragmentation code (since my rewrite almost 5 years ago)
erroneously sets skb->len rather than using skb_trim() to adjust
the length of the first fragment after copying out all the others.
This leaves the skb tail pointer pointing to after where the data
originally ended, and thus causes the encryption MIC to be written
at that point, rather than where it belongs: immediately after the
data.

The impact of this is that if software encryption is done, then
 a) encryption doesn't work for the first fragment, the connection
    becomes unusable as the first fragment will never be properly
    verified at the receiver, the MIC is practically guaranteed to
    be wrong
 b) we leak up to 8 bytes of plaintext (!) of the packet out into
    the air

This is only mitigated by the fact that many devices are capable
of doing encryption in hardware, in which case this can't happen
as the tail pointer is irrelevant in that case. Additionally,
fragmentation is not used very frequently and would normally have
to be configured manually.

Fix this by using skb_trim() properly.

Fixes: 2de8e0d999b8 ("mac80211: rewrite fragmentation")
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: ftdi_sio: add Tagsys RFID Reader IDs

commit 76f24e3f39a1a94bab0d54e98899d64abcd9f69c upstream.

Adding two more IDs to the ftdi_sio usb serial driver.
It now connects Tagsys RFID readers.
There might be more IDs out there for other Tagsys models.

Signed-off-by: Ulrich Hahn <uhahn@eanco.de>
Cc: Johan Hovold <johan@hovold.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

SELinux: Fix kernel BUG on empty security contexts.

commit 2172fa709ab32ca60e86179dc67d0857be8e2c98 upstream.

Setting an empty security context (length=0) on a file will
lead to incorrectly dereferencing the type and other fields
of the security context structure, yielding a kernel BUG.
As a zero-length security context is never valid, just reject
all such security contexts whether coming from userspace
via setxattr or coming from the filesystem upon a getxattr
request by SELinux.

Setting a security context value (empty or otherwise) unknown to
SELinux in the first place is only possible for a root process
(CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only
if the corresponding SELinux mac_admin permission is also granted
to the domain by policy.  In Fedora policies, this is only allowed for
specific domains such as livecd for setting down security contexts
that are not defined in the build host policy.

Reproducer:
su
setenforce 0
touch foo
setfattr -n security.selinux foo

Caveat:
Relabeling or removing foo after doing the above may not be possible
without booting with SELinux disabled.  Any subsequent access to foo
after doing the above will also trigger the BUG.

BUG output from Matthew Thode:
[  473.893141] ------------[ cut here ]------------
[  473.962110] kernel BUG at security/selinux/ss/services.c:654!
[  473.995314] invalid opcode: 0000 [#6] SMP
[  474.027196] Modules linked in:
[  474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G      D   I
3.13.0-grsec #1
[  474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0
07/29/10
[  474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti:
ffff8805f50cd488
[  474.183707] RIP: 0010:[<ffffffff814681c7>]  [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[  474.219954] RSP: 0018:ffff8805c0ac3c38  EFLAGS: 00010246
[  474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX:
0000000000000100
[  474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI:
ffff8805e8aaa000
[  474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09:
0000000000000006
[  474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12:
0000000000000006
[  474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15:
0000000000000000
[  474.453816] FS:  00007f2e75220800(0000) GS:ffff88061fc00000(0000)
knlGS:0000000000000000
[  474.489254] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4:
00000000000207f0
[  474.556058] Stack:
[  474.584325]  ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98
ffff8805f1190a40
[  474.618913]  ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990
ffff8805e8aac860
[  474.653955]  ffff8805c0ac3cb8 000700068113833a ffff880606c75060
ffff8805c0ac3d94
[  474.690461] Call Trace:
[  474.723779]  [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a
[  474.778049]  [<ffffffff81468824>] security_compute_av+0xf4/0x20b
[  474.811398]  [<ffffffff8196f419>] avc_compute_av+0x2a/0x179
[  474.843813]  [<ffffffff8145727b>] avc_has_perm+0x45/0xf4
[  474.875694]  [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31
[  474.907370]  [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e
[  474.938726]  [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22
[  474.970036]  [<ffffffff811b057d>] vfs_getattr+0x19/0x2d
[  475.000618]  [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91
[  475.030402]  [<ffffffff811b063b>] vfs_lstat+0x19/0x1b
[  475.061097]  [<ffffffff811b077e>] SyS_newlstat+0x15/0x30
[  475.094595]  [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3
[  475.148405]  [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b
[  475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48
8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7
75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8
[  475.255884] RIP  [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[  475.296120]  RSP <ffff8805c0ac3c38>
[  475.328734] ---[ end trace f076482e9d754adc ]---

Reported-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

of: fix PCI bus match for PCIe slots

commit 14e2abb732e485ee57d9d5b2cb8884652238e5c1 upstream.

On IBM pseries systems the device_type device-tree property of a PCIe
bridge contains the string "pciex". The of_bus_pci_match() function was
looking only for "pci" on this property, so in such cases the bus
matching code was falling back to the default bus, causing problems on
functions that should be using "assigned-addresses" for region address
translation. This patch fixes the problem by also looking for "pciex" on
the PCI bus match function.

v2: added comment

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

of: Fix address decoding on Bimini and js2x machines

commit 6dd18e4684f3d188277bbbc27545248487472108 upstream.

 Commit:

  e38c0a1fbc5803cbacdaac0557c70ac8ca5152e7
  of/address: Handle #address-cells > 2 specially

broke real time clock access on Bimini, js2x, and similar powerpc
machines using the "maple" platform. That code was indirectly relying
on the old (broken) behaviour of the translation for the hypertransport
to ISA bridge.

This fixes it by treating hypertransport as a PCI bus

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda/realtek - Avoid invalid COEFs for ALC271X

commit d3c56568f43807135f2c2a09582a69f809f0d8b7 upstream.

We've seen often problems after suspend/resume on Acer Aspire One
AO725 with ALC271X codec as reported in kernel bugzilla, and it turned
out that some COEFs doesn't work and triggers the codec communication
stall.

Since these magic COEF setups are specific to ALC269VB for some PLL
configurations, the machine works even without these manual
adjustment.  So, let's simply avoid applying them for ALC271X.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: return 0]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb-storage: enable multi-LUN scanning when needed

commit 823d12c95c666fa7ab7dad208d735f6bc6afabdc upstream.

People sometimes create their own custom-configured kernels and forget
to enable CONFIG_SCSI_MULTI_LUN.  This causes problems when they plug
in a USB storage device (such as a card reader) with more than one
LUN.

Fortunately, we can tell fairly easily when a storage device claims to
have more than one LUN.  When that happens, this patch asks the SCSI
layer to probe all the LUNs automatically, regardless of the config
setting.

The patch also updates the Kconfig help text for usb-storage,
explaining that CONFIG_SCSI_MULTI_LUN may be necessary.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Thomas Raschbacher <lordvan@lordvan.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - slave_alloc() already has a us_data pointer]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb-storage: add unusual-devs entry for BlackBerry 9000

commit c5637e5119c43452a00e27c274356b072263ecbb upstream.

This patch adds an unusual-devs entry for the BlackBerry 9000.  This
fixes Bugzilla #22442.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de>
Tested-by: Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb-storage: restrict bcdDevice range for Super Top in Cypress ATACB

commit a9c143c82608bee2a36410caa56d82cd86bdc7fa upstream.

The Cypress ATACB unusual-devs entry for the Super Top SATA bridge
causes problems.  Although it was originally reported only for
bcdDevice = 0x160, its range was much larger.  This resulted in a bug
report for bcdDevice 0x220, so the range was capped at 0x219.  Now
Milan reports errors with bcdDevice 0x150.

Therefore this patch restricts the range to just 0x160.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Milan Svoboda <milan.svoboda@centrum.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: ftdi_sio: add Mindstorms EV3 console adapter

commit 67847baee056892dc35efb9c3fd05ae7f075588c upstream.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k: Do not support PowerSave by default

commit 8298383c2cd5a6d0639f1bb1781fba181bd20154 upstream.

Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k_htc: Do not support PowerSave by default

commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream.

It is a copy/paste of patch provided by Sujith for ath9k.

"Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter."

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/dump: Fix dump memory detection

commit d7736ff5be31edaa4fe5ab62810c64529a24b149 upstream.

Dumps created by kdump or zfcpdump can contain invalid memory holes when
dumping z/VM systems that have memory pressure.

For example:

   # zgetdump -i /proc/vmcore.
   Memory map:
   0000000000000000 - 0000000000bfffff (12 MB)
   0000000000e00000 - 00000000014fffff (7 MB)
   000000000bd00000 - 00000000f3bfffff (3711 MB)

The memory detection function find_memory_chunks() issues tprot to
find valid memory chunks. In case of CMM it can happen that pages are
marked as unstable via set_page_unstable() in arch_free_page().
If z/VM has released that pages, tprot returns -EFAULT and indicates
a memory hole.

So fix this and switch off CMM in case of kdump or zfcpdump.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset

commit 13e1b87c986100169b0695aeb26970943665eda9 upstream.

Fix the following build error:

drivers/media/usb/dvb-usb-v2/
mxl111sf-tuner.h:72:9: error: expected ‘;’, ‘,’ or ‘)’ before ‘struct’
         struct mxl111sf_tuner_config *cfg)

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN

commit 9f9c47f00ce99329b1a82e2ac4f70f0fe3db549c upstream.

It's a bit odd to see a newer device showing mod15write; however, the
reported behavior is highly consistent and other factors which could
contribute seem to have been verified well enough.  Also, both
sata_sil itself and the drive are fairly outdated at this point making
the risk of this change fairly low.  It is possible, probably likely,
that other drive models in the same family have the same problem;
however, for now, let's just add the specific model which was tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: matson <lists-matsonpa@luxsci.me>
References: http://lkml.kernel.org/g/201401211912.s0LJCk7F015058@rs103.luxsci.com
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

power: max17040: Fix NULL pointer dereference when there is no platform_data

commit ac323d8d807060f7c95a685a9fe861e7b6300993 upstream.

Fix NULL pointer dereference of "chip->pdata" if platform_data was not
supplied to the driver.

The driver during probe stored the pointer to the platform_data:
chip->pdata = client->dev.platform_data;
Later it was dereferenced in max17040_get_online() and
max17040_get_status().

If platform_data was not supplied, the NULL pointer exception would
happen:

[    6.626094] Unable to handle kernel  of a at virtual address 00000000
[    6.628557] pgd = c0004000
[    6.632868] [00000000] *pgd=66262564
[    6.634636] Unable to handle kernel paging request at virtual address e6262000
[    6.642014] pgd = de468000
[    6.644700] [e6262000] *pgd=00000000
[    6.648265] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[    6.653552] Modules linked in:
[    6.656598] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 3.10.14-02717-gc58b4b4 #505
[    6.664334] Workqueue: events max17040_work
[    6.668488] task: dfa11b80 ti: df9f6000 task.ti: df9f6000
[    6.673873] PC is at show_pte+0x80/0xb8
[    6.677687] LR is at show_pte+0x3c/0xb8
[    6.681503] pc : [<c001b7b8>]    lr : [<c001b774>]    psr: 600f0113
[    6.681503] sp : df9f7d58  ip : 600f0113  fp : 00000009
[    6.692965] r10: 00000000  r9 : 00000000  r8 : dfa11b80
[    6.698171] r7 : df9f7ea0  r6 : e6262000  r5 : 00000000  r4 : 00000000
[    6.704680] r3 : 00000000  r2 : e6262000  r1 : 600f0193  r0 : c05b3750
[    6.711194] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    6.718485] Control: 10c53c7d  Table: 5e46806a  DAC: 00000015
[    6.724218] Process kworker/0:1 (pid: 31, stack limit = 0xdf9f6238)
[    6.730465] Stack: (0xdf9f7d58 to 0xdf9f8000)
[    6.914325] [<c001b7b8>] (show_pte+0x80/0xb8) from [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74)
[    6.923425] [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74) from [<c001bb7c>] (do_page_fault+0x2c4/0x360)
[    6.933144] [<c001bb7c>] (do_page_fault+0x2c4/0x360) from [<c0008400>] (do_DataAbort+0x34/0x9c)
[    6.941825] [<c0008400>] (do_DataAbort+0x34/0x9c) from [<c000e5d8>] (__dabt_svc+0x38/0x60)
[    6.950058] Exception stack(0xdf9f7ea0 to 0xdf9f7ee8)
[    6.955099] 7ea0: df0c1790 00000000 00000002 00000000 df0c1794 df0c1790 df0c1790 00000042
[    6.963271] 7ec0: df0c1794 00000001 00000000 00000009 00000000 df9f7ee8 c0306268 c0306270
[    6.971419] 7ee0: a00f0113 ffffffff
[    6.974902] [<c000e5d8>] (__dabt_svc+0x38/0x60) from [<c0306270>] (max17040_work+0x8c/0x144)
[    6.983317] [<c0306270>] (max17040_work+0x8c/0x144) from [<c003f364>] (process_one_work+0x138/0x440)
[    6.992429] [<c003f364>] (process_one_work+0x138/0x440) from [<c003fa64>] (worker_thread+0x134/0x3b8)
[    7.001628] [<c003fa64>] (worker_thread+0x134/0x3b8) from [<c00454bc>] (kthread+0xa4/0xb0)
[    7.009875] [<c00454bc>] (kthread+0xa4/0xb0) from [<c000eb28>] (ret_from_fork+0x14/0x2c)
[    7.017943] Code: e1a03005 e2422480 e0826104 e59f002c (e7922104)
[    7.024017] ---[ end trace 73bc7006b9cc5c79 ]---

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: c6f4a42de60b981dd210de01cd3e575835e3158e
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

alpha: fix broken network checksum

commit 0ef38d70d4118b2ce1a538d14357be5ff9dc2bbd upstream.

The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 breaks networking on
alpha (there is a follow-up fix 5cfe8f1ba5eebe6f4b6e5858cdb1a5be4f3272a6,
but networking is still broken even with the second patch).

The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 makes
csum_partial_copy_from_user check the pointer with access_ok. However,
csum_partial_copy_from_user is called also from csum_partial_copy_nocheck
and csum_partial_copy_nocheck is called on kernel pointers and it is
supposed not to check pointer validity.

This bug results in ssh session hangs if the system is loaded and bulk
data are printed to ssh terminal.

This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so
that access_ok in csum_partial_copy_from_user accepts kernel-space
addresses.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ata: enable quirk from jmicron JMB350 for JMB394

commit efb9e0f4f43780f0ae0c6428d66bd03e805c7539 upstream.

Without the patch the kernel generates the following error.

 ata11.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
 ata11.15: Port Multiplier vendor mismatch '0x197b' != '0x123'
 ata11.15: PMP revalidation failed (errno=-19)
 ata11.15: failed to recover PMP after 5 tries, giving up

This patch helps to bypass this error and the device becomes
functional.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: <linux-ide@vger.kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm, oom: base root bonus on current usage

commit 778c14affaf94a9e4953179d3e13a544ccce7707 upstream.

A 3% of system memory bonus is sometimes too excessive in comparison to
other processes.

With commit a63d83f427fb ("oom: badness heuristic rewrite"), the OOM
killer tries to avoid killing privileged tasks by subtracting 3% of
overall memory (system or cgroup) from their per-task consumption.  But
as a result, all root tasks that consume less than 3% of overall memory
are considered equal, and so it only takes 33+ privileged tasks pushing
the system out of memory for the OOM killer to do something stupid and
kill dhclient or other root-owned processes.  For example, on a 32G
machine it can't tell the difference between the 1M agetty and the 10G
fork bomb member.

The changelog describes this 3% boost as the equivalent to the global
overcommit limit being 3% higher for privileged tasks, but this is not
the same as discounting 3% of overall memory from _every privileged task
individually_ during OOM selection.

Replace the 3% of system memory bonus with a 3% of current memory usage
bonus.

By giving root tasks a bonus that is proportional to their actual size,
they remain comparable even when relatively small.  In the example
above, the OOM killer will discount the 1M agetty's 256 badness points
down to 179, and the 10G fork bomb's 262144 points down to 183500 points
and make the right choice, instead of discounting both to 0 and killing
agetty because it's first in the task list.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: existing code changes 'points' directly rather
 than using 'adj' variable]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

crypto: s390 - fix des and des3_ede ctr concurrency issue

commit ee97dc7db4cbda33e4241c2d85b42d1835bc8a35 upstream.

In s390 des and 3des ctr mode there is one preallocated page
used to speed up the en/decryption. This page is not protected
against concurrent usage and thus there is a potential of data
corruption with multiple threads.

The fix introduces locking/unlocking the ctr page and a slower
fallback solution at concurrency situations.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

crypto: s390 - fix des and des3_ede cbc concurrency issue

commit adc3fcf1552b6e406d172fd9690bbd1395053d13 upstream.

In s390 des and des3_ede cbc mode the iv value is not protected
against concurrency access and modifications from another running
en/decrypt operation which is using the very same tfm struct
instance. This fix copies the iv to the local stack before
the crypto operation and stores the value back when done.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

crypto: s390 - fix concurrency issue in aes-ctr mode

commit 0519e9ad89e5cd6e6b08398f57c6a71d9580564c upstream.

The aes-ctr mode uses one preallocated page without any concurrency
protection. When multiple threads run aes-ctr encryption or decryption
this can lead to data corruption.

The patch introduces locking for the page and a fallback solution with
slower en/decryption performance in concurrency situations.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/crypto: Don't panic after crypto instruction failures

commit 36eb2caa7bace31b7868a57f77cb148e58d1c9f9 upstream.

Remove the BUG_ON's that check for failure or incomplete
results of the s390 hardware crypto instructions.
Rather report the errors as -EIO to the crypto layer.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

target/iscsi: Fix network portal creation race

commit ee291e63293146db64668e8d65eb35c97e8324f4 upstream.

When creating network portals rapidly, such as when restoring a
configuration, LIO's code to reuse existing portals can return a false
negative if the thread hasn't run yet and set np_thread_state to
ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack
when attempting to bind to the same address/port.

This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list,
so even if the thread hasn't run yet, iscsit_get_np will return the
existing np.

Also, convert np_lock -> np_mutex + hold across adding new net portal
to g_np_list to prevent a race where two threads may attempt to create
the same network portal, resulting in one of them failing.

(nab: Add missing mutex_unlocks in iscsit_add_np failure paths)
(DanC: Fix incorrect spin_unlock -> spin_unlock_bh)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>