pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
int nents, int direction)
-Maps a scatter gather list from the block layer.
-
Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
Please note that the sg cannot be mapped again if it has been mapped once.
The mapping process is allowed to destroy information in the sg.
1.3 sparc64
1.4 ppc
1.5 SuperH
+1.6 Blackfin
2. "Policy" / "Governor"?
2.1 Policy
SH-3
SH-4
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
2. "Policy" / "Governor" ?
==========================
Caveats
=======
Features which OCFS2 does not support yet:
- - extended attributes
- quotas
- - cluster aware flock
- - cluster aware lockf
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
- POSIX ACLs
2.14 /proc/<pid>/io - Display the IO accounting fields
2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
2.16 /proc/<pid>/mountinfo - Information about mounts
+ 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
------------------------------------------------------------------------------
Preface
Documentation/filesystems/sharedsubtree.txt
+2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for max_user_watches is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
------------------------------------------------------------------------------
+
archive and links it into the resulting kernel binary. By default, this
archive is empty (consuming 134 bytes on x86).
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary. This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary. This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
static struct input_dev *button_dev;
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
+ return IRQ_HANDLED;
}
static int __init button_init(void)
Possible values are:
isolate - enable device isolation (each device, as far
as possible, will get its own protection
- domain)
+ domain) [default]
+ share - put every device behind one IOMMU into the
+ same protection domain
fullflush - enable flushing of IO/TLB entries when
they are unmapped. Otherwise they are
flushed before they will be reused, which
it is equivalent to "nosmp", which also disables
the IO APIC.
- max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or
- equal to this physical address is ignored.
+ max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater than
+ or equal to this physical address is ignored.
max_luns= [SCSI] Maximum number of LUNs to probe.
Should be between 1 and 2^32-1.
mga= [HW,DRM]
+ min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
+ physical address is ignored.
+
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
static void adjust_link(struct net_device *dev);
Next, you need to know the device name of the PHY connected to this device.
- The name will look something like, "phy0:0", where the first number is the
+ The name will look something like, "0:00", where the first number is the
bus id, and the second is the PHY's address on that bus. Typically,
the bus is responsible for making its ID unique.
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
STAC92HD73*
ref Reference board
- dell-m6 Dell desktops
+ dell-m6-amic Dell desktops/laptops with analog mics
+ dell-m6-dmic Dell desktops/laptops with digital mics
+ dell-m6 Dell desktops/laptops with both type of mics
STAC9872
vaio Setup for VAIO FE550G/SZ110
/* if your mach-* infrastructure doesn't support kernels that can
* run on multiple boards, pdata wouldn't benefit from "__init".
*/
- static struct mysoc_spi_data __init pdata = { ... };
+ static struct mysoc_spi_data __initdata pdata = { ... };
static __init board_init(void)
{
$ cat /debug/tracing/trace_pipe > mydump.txt &
Start X or whatever.
$ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
Check for lost events.
do.
Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
pressing ctrl+c.
$ cat /debug/tracing/trace_entries
gives you a number. Approximately double this number and write it back, for
instance:
+$ echo 0 > /debug/tracing/tracing_enabled
$ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
FTRACE
P: Steven Rostedt
-M: srostedt@redhat.com
+M: rostedt@goodmis.org
S: Maintained
FUJITSU FR-V (FRV) PORT
S: Maintained
SOFTWARE RAID (Multiple Disks) SUPPORT
-P: Ingo Molnar
-M: mingo@redhat.com
P: Neil Brown
M: neilb@suse.de
L: linux-raid@vger.kernel.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc5
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc7
+NAME = Erotic Pickled Herring
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
-# arch_ptrace() and not #define __ARCH_SYS_PTRACE
-# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
return PCI_SLOT(dev->devfn);
}
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
/*
* Where secondaries begin a life of C.
*/
-void __init
+void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
* Send a message to a secondary's console. "START" is one such
* interesting message. ;-)
*/
-static void __init
+static void __cpuinit
send_secondary_console_msg(char *str, int cpuid)
{
struct percpu_struct *cpu;
/*
* Convince the console to have a secondary cpu begin execution.
*/
-static int __init
+static int __cpuinit
secondary_cpu_start(int cpuid, struct task_struct *idle)
{
struct percpu_struct *cpu;
static int opDEC_fix;
-static void __init
+static void __cpuinit
opDEC_check(void)
{
__asm__ __volatile__ (
return;
}
-void __init
+void __cpuinit
trap_init(void)
{
/* Tell PAL-code what global pointer we want in the kernel. */
# CONFIG_MACH_AKITA is not set
# CONFIG_MACH_SPITZ is not set
# CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
+#define LCD_TYPE_MASK 0xf
#define LCD_TYPE_UNKNOWN 0
#define LCD_TYPE_MONO_STN 1
#define LCD_TYPE_MONO_DSTN 2
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
/* Devices prepare suspend */
- is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
1:
mov r0, #0xa0000000 @ Don't suppose memory access works
orr r0, r0, #0x00200000 @ even if it's supposed to
+ orr r0, r0, #0x0000b000
mov r1, #0
str r1, [r0] @ Early disable resume for next boot
ldr r0, mioa701_jumpaddr @ (Murphy's Law)
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO31_AC97_SYNC,
/* IrDA */
+ GPIO40_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
GPIO16_PWM0_OUT,
/* USB */
- GPIO13_GPIO,
+ GPIO13_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO94_GPIO, /* wifi power 1 */
+ GPIO108_GPIO, /* wifi power 2 */
+ GPIO116_GPIO, /* wifi ready */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MISC. */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
};
/******************************************************************************
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
- err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+ palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
- return err;
+ goto err2;
}
err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
if (err)
- goto pwr_err;
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+ if (err)
+ goto err4;
err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
if (err)
- goto ro_err;
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+ if (err)
+ goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
-ro_err:
+err5:
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
return err;
}
{
gpio_free(GPIO_NR_PALMTX_SD_READONLY);
gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
}
static void palmtx_mci_power(struct device *dev, unsigned int vdd)
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
-
};
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
if (ret)
goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+ if (ret)
+ goto err2;
ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+ if (ret)
+ goto err3;
return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMTX_BL_POWER);
err:
/******************************************************************************
* IrDA
******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
}
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .startup = palmtx_irda_startup,
+ .shutdown = palmtx_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmtx_irda_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
- gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
- udelay(50);
- gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .udc_command = palmtx_udc_command,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup_inverted = 0,
};
/******************************************************************************
ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
- goto err_cs_ac;
-
- ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
if (ret)
- goto err_cs_usb;
+ goto err2;
return 0;
-err_cs_usb:
+err2:
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
return ret;
}
return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
}
-static int palmtx_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
}
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmtx_is_ac_online,
- .is_usb_online = palmtx_is_usb_online,
.exit = power_supply_exit,
.supplied_to = palmtx_supplicants,
.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ }
+}
+
+
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
+ palmtx_udc_init();
pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
.gpio = NR_BUILTIN_GPIO + 1,
}, {
.bus_id = 0, /* Must match with the camera ID above */
+ .gpio = -ENXIO,
}
};
/* Jump into ROM at address 0 */
cpu_reset(0);
break;
- case 'h':
- do_hw_reset();
- break;
case 'g':
do_gpio_reset();
break;
+ case 'h':
+ default:
+ do_hw_reset();
+ break;
}
}
static unsigned long spitz_pin_config[] __initdata = {
/* Chip Selects */
GPIO78_nCS_2, /* SCOOP #2 */
+ GPIO79_nCS_3, /* NAND */
GPIO80_nCS_4, /* SCOOP #1 */
/* LCD - 16bpp Active TFT */
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
- GPIO79_PSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO104_PSKTSEL,
/* MMC */
GPIO32_MMC_CLK,
spitz_pcmcia_config.num_devs = 1;
platform_scoop_config = &spitz_pcmcia_config;
- pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
common_init();
unsigned long pin_mosi;
unsigned long pin_miso;
+ int num_chipselect;
int bus_num;
void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
#define OMAP24XX_GPIO_DATAIN 0x0038
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+ wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
{
int i;
- if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+ if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
return 0;
for (i = 0; i < gpio_bank_count; i++) {
* clk_allow_idle - Counters previous clk_deny_idle
* @clk: clock signal handle
*/
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
extern unsigned long _ramstart, _ramend, _rambase;
extern unsigned long memory_start, memory_end, physical_mem_end;
extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
- _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
+ _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
_ebss_l2[], _l2_lma_start[];
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_mapping_error
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
/*
* Map a single buffer of the indicated size for DMA in streaming mode.
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
|| gpio == GPIO_PH14 || gpio == GPIO_PH15
|| gpio == GPIO_PJ14 || gpio == GPIO_PJ15
- || gpio > MAX_BLACKFIN_GPIOS)
+ || gpio >= MAX_BLACKFIN_GPIOS)
return -EINVAL;
return 0;
}
static u16 __init lock_kernel_check(u32 start, u32 end)
{
- if ((end <= (u32) _end && end >= (u32)_stext) ||
- (start <= (u32) _end && start >= (u32)_stext))
- return IN_KERNEL;
- return 0;
+ if (start >= (u32)_end || end <= (u32)_stext)
+ return 0;
+
+ /* This cplb block overlapped with kernel area. */
+ return IN_KERNEL;
}
static unsigned short __init
return 1;
#endif
#if L1_DATA_B_LENGTH != 0
- if (addr >= L1_DATA_B_START
+ if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1)
&& addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)
return 1;
+#endif
+#if L2_LENGTH != 0
+ if (addr >= L2_START + (_ebss_l2 - _stext_l2)
+ && addr + size <= L2_START + L2_LENGTH)
+ return 1;
#endif
return 0;
}
/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
- l1_data_a_length = _ebss_l1 - _sdata_l1;
+ l1_data_a_length = _sbss_l1 - _sdata_l1;
if (l1_data_a_length > L1_DATA_A_LENGTH)
panic("L1 Data SRAM Bank A Overflow\n");
- /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
+ /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
- l1_data_b_length = _ebss_b_l1 - _sdata_b_l1;
+ l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
if (l1_data_b_length > L1_DATA_B_LENGTH)
panic("L1 Data SRAM Bank B Overflow\n");
- /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
+ /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
l1_data_a_length, l1_data_b_length);
if (L2_LENGTH != 0) {
- l2_length = _ebss_l2 - _stext_l2;
+ l2_length = _sbss_l2 - _stext_l2;
if (l2_length > L2_LENGTH)
panic("L2 SRAM Overflow\n");
printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
bfin_compiled_revid(), bfin_revid());
}
- if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+ if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
CPU, bfin_revid());
}
#endif
-#ifdef CONFIG_VERBOSE_DEBUG
+#ifdef CONFIG_DEBUG_VERBOSE
#define verbose_printk(fmt, arg...) \
printk(fmt, ##arg)
#else
char *name = p->comm;
struct file *file = vma->vm_file;
- if (file)
- name = d_path(&file->f_path, _tmpbuf,
+ if (file) {
+ char *d_name = d_path(&file->f_path, _tmpbuf,
sizeof(_tmpbuf));
+ if (!IS_ERR(d_name))
+ name = d_name;
+ }
/* FLAT does not have its text aligned to the start of
* the map while FDPIC ELF does ...
#endif
panic("Kernel exception");
} else {
-#ifdef CONFIG_VERBOSE_DEBUG
+#ifdef CONFIG_DEBUG_VERBOSE
unsigned long *stack;
/* Dump the user space stack */
stack = (unsigned long *)rdusp();
*/
.macro do_flush flushins:req optflushins optnopins label
+ R2 = -L1_CACHE_BYTES;
+
+ /* start = (start & -L1_CACHE_BYTES) */
+ R0 = R0 & R2;
+
/* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
R1 += -1;
- R2 = -L1_CACHE_BYTES;
R1 = R1 & R2;
R1 += L1_CACHE_BYTES;
/* Flush all cache lines assocoiated with this area of memory. */
ENTRY(_blackfin_icache_dcache_flush_range)
- do_flush IFLUSH, FLUSH
+ do_flush FLUSH, IFLUSH
ENDPROC(_blackfin_icache_dcache_flush_range)
/* Throw away all D-cached data in specified region without any obligation to
/**************************************************************************/
-static unsigned int bfin_getfreq(unsigned int cpu)
+static unsigned int bfin_getfreq_khz(unsigned int cpu)
{
/* The driver only support single cpu */
if (cpu != 0)
return -1;
- return get_cclk();
+ return get_cclk() / 1000;
}
cclk_hz = bfin_freq_table[index].frequency;
- freqs.old = bfin_getfreq(0);
+ freqs.old = bfin_getfreq_khz(0);
freqs.new = cclk_hz;
freqs.cpu = 0;
if (policy->cpu != 0)
return -EINVAL;
- cclk = get_cclk();
- sclk = get_sclk();
+ cclk = get_cclk() / 1000;
+ sclk = get_sclk() / 1000;
#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
min_cclk = sclk * 2;
dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1;
- pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n",
+ pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
bfin_freq_table[index].frequency,
dpm_state_table[index].csel,
dpm_state_table[index].tscale);
static struct cpufreq_driver bfin_driver = {
.verify = bfin_verify_speed,
.target = bfin_target,
- .get = bfin_getfreq,
+ .get = bfin_getfreq_khz,
.init = __bfin_cpu_init,
.name = "bfin cpufreq",
.owner = THIS_MODULE,
p5.h = hi(ILAT);
r6 = [p5];
r7 = 0x20; /* Did I just cause anther HW error? */
- r7 = r7 & r1;
+ r6 = r7 & r6;
CC = R7 == R6;
if CC JUMP _double_fault;
#endif
return;
}
- free_l2_sram_head.next->paddr = (void *)L2_START +
- (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
- free_l2_sram_head.next->size = L2_LENGTH -
- (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+ free_l2_sram_head.next->paddr =
+ (void *)L2_START + (_ebss_l2 - _stext_l2);
+ free_l2_sram_head.next->size =
+ L2_LENGTH - (_ebss_l2 - _stext_l2);
free_l2_sram_head.next->pid = 0;
free_l2_sram_head.next->next = NULL;
int error = -EBADF;
struct file * file = NULL;
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
/* As with sparc32, make sure the shift for mmap2 is constant
(12), no matter what PAGE_SIZE we have.... */
/* But unlike sparc32, don't just silently break if we're
trying to map something we can't */
- if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
return -EINVAL;
+ pgoff >>= PAGE_SHIFT - 12;
- pgoff >>= (PAGE_SHIFT - 12);
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
down_write(¤t->mm->mmap_sem);
error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
/************************************************/
#define ia64_ssm IA64_INTRINSIC_MACRO(ssm)
#define ia64_rsm IA64_INTRINSIC_MACRO(rsm)
-#define ia64_getreg IA64_INTRINSIC_API(getreg)
+#define ia64_getreg IA64_INTRINSIC_MACRO(getreg)
#define ia64_setreg IA64_INTRINSIC_API(setreg)
#define ia64_set_rr IA64_INTRINSIC_API(set_rr)
#define ia64_get_rr IA64_INTRINSIC_API(get_rr)
ia64_native_rsm(mask); \
} while (0)
+/* returned ip value should be the one in the caller,
+ * not in __paravirt_getreg() */
+#define paravirt_getreg(reg) \
+ ({ \
+ unsigned long res; \
+ BUILD_BUG_ON(!__builtin_constant_p(reg)); \
+ if ((reg) == _IA64_REG_IP) \
+ res = ia64_native_getreg(_IA64_REG_IP); \
+ else \
+ res = pv_cpu_ops.getreg(reg); \
+ res; \
+ })
+
/******************************************************************************
* replacement of hand written assembly codes.
*/
#define arch_has_block_step() (1)
extern void user_enable_block_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
END(prefetch_stack)
GLOBAL_ENTRY(kernel_execve)
+ rum psr.ac
mov r15=__NR_execve // put syscall number in place
break __BREAK_SYSCALL
br.ret.sptk.many rp
* Switch into virtual mode:
*/
movl r16=(IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN \
- |IA64_PSR_DI)
+ |IA64_PSR_DI|IA64_PSR_AC)
;;
mov cr.ipsr=r16
movl r17=1f
return previous_current;
no_mod:
- printk(KERN_INFO "cpu %d, %s %s, original stack not modified\n",
+ mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n",
smp_processor_id(), type, msg);
return previous_current;
}
unsigned long res = -1;
switch (regnum) {
CASE_GET_REG(GP);
- CASE_GET_REG(IP);
+ /*CASE_GET_REG(IP);*/ /* returned ip value shouldn't be constant */
CASE_GET_REG(PSR);
CASE_GET_REG(TP);
CASE_GET_REG(SP);
#include <linux/kernel.h>
#include <asm/page.h>
-#include <asm/iommu.h>
dma_addr_t bad_dma_address __read_mostly;
EXPORT_SYMBOL(bad_dma_address);
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
*/
-static void
+static void __init
sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
s64 status = 0;
__HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR)
#ifdef CONFIG_IA32_SUPPORT
-__HCALL1(xen_get_eflag, HYPERPRIVOP_GET_EFLAG)
+__HCALL0(xen_get_eflag, HYPERPRIVOP_GET_EFLAG)
__HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG) // refer SDM vol1 3.1.8
#endif /* CONFIG_IA32_SUPPORT */
/*
* References to members of the boot_cpu_data structure.
*/
- .text
+.section .text.head, "ax"
.global start_kernel
.global __bss_start
.global _end
/*
* AP startup routine
*/
- .text
.global eit_vector
ENTRY(startup_AP)
;; setup EVB
nop
#endif /* CONFIG_SMP */
+ .text
ENTRY(stack_start)
.long init_thread_union+8192
.long __KERNEL_DS
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#include <asm/break.h>
-#define BUG() \
-do { \
- __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
-} while (0)
+static inline void __noreturn BUG(void)
+{
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+ /* Fool GCC into thinking the function doesn't return. */
+ while (1)
+ ;
+}
#define HAVE_ARCH_BUG
#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
-#define BUG_ON(condition) \
-do { \
- __asm__ __volatile__("tne $0, %0, %1" \
- : : "r" (condition), "i" (BRK_BUG)); \
-} while (0)
+static inline void __BUG_ON(unsigned long condition)
+{
+ if (__builtin_constant_p(condition)) {
+ if (condition)
+ BUG();
+ else
+ return;
+ }
+ __asm__ __volatile__("tne $0, %0, %1"
+ : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
#define HAVE_ARCH_BUG_ON
extern unsigned get_434_reg(unsigned reg_offs);
extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
extern unsigned char get_latch_u5(void);
+extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
+extern void rb532_gpio_set_istat(int bit, unsigned gpio);
#endif /* _RC32434_GPIO_H_ */
#define BTCS 0x010040
#define BTCOMPARE 0x010044
#define GPIOBASE 0x050000
-#define GPIOCFG 0x050004
-#define GPIOD 0x050008
-#define GPIOILEVEL 0x05000C
-#define GPIOISTAT 0x050010
-#define GPIONMIEN 0x050014
-#define IMASK6 0x038038
+/* Offsets relative to GPIOBASE */
+#define GPIOFUNC 0x00
+#define GPIOCFG 0x04
+#define GPIOD 0x08
+#define GPIOILEVEL 0x0C
+#define GPIOISTAT 0x10
+#define GPIONMIEN 0x14
+#define IMASK6 0x38
#define LO_WPX (1 << 0)
#define LO_ALE (1 << 1)
#define LO_CLE (1 << 2)
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
/*
* Initialize the count register as a clocksource
*/
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_CSRC_R4K
extern int init_mips_clocksource(void);
#else
static inline int init_mips_clocksource(void)
if (!cpu_has_counter || !mips_hpt_frequency)
return -ENXIO;
- /* Calclate a somewhat reasonable rating value */
+ /* Calculate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
/* XXX Check with wje if the Indy caches can differenciate between
writeback + invalidate and just invalidate. */
-struct bcache_ops indy_sc_ops = {
+static struct bcache_ops indy_sc_ops = {
.bc_enable = indy_sc_enable,
.bc_disable = indy_sc_disable,
.bc_wback_inv = indy_sc_wback_invalidate,
#include <linux/init.h>
#include <linux/smp.h>
-#include <asm-mips/addrspace.h>
-#include <asm-mips/mips-boards/launch.h>
-#include <asm-mips/mipsmtregs.h>
+#include <asm/addrspace.h>
+#include <asm/mips-boards/launch.h>
+#include <asm/mipsmtregs.h>
int amon_cpu_avail(int cpu)
{
/* Resources and device for NAND */
static int rb532_dev_ready(struct mtd_info *mtd)
{
- return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+ return gpio_get_value(GPIO_RDY);
}
static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
struct rb532_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase;
- void (*set_int_level)(struct gpio_chip *chip, unsigned offset, int value);
- int (*get_int_level)(struct gpio_chip *chip, unsigned offset);
- void (*set_int_status)(struct gpio_chip *chip, unsigned offset, int value);
- int (*get_int_status)(struct gpio_chip *chip, unsigned offset);
};
struct mpmc_device dev3;
}
EXPORT_SYMBOL(get_latch_u5);
+/* rb532_set_bit - sanely set a bit
+ *
+ * bitval: new value for the bit
+ * offset: bit index in the 4 byte address range
+ * ioaddr: 4 byte aligned address being altered
+ */
+static inline void rb532_set_bit(unsigned bitval,
+ unsigned offset, void __iomem *ioaddr)
+{
+ unsigned long flags;
+ u32 val;
+
+ bitval = !!bitval; /* map parameter to {0,1} */
+
+ local_irq_save(flags);
+
+ val = readl(ioaddr);
+ val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
+ val |= ( bitval << offset ); /* set bit if bitval == 1 */
+ writel(val, ioaddr);
+
+ local_irq_restore(flags);
+}
+
+/* rb532_get_bit - read a bit
+ *
+ * returns the boolean state of the bit, which may be > 1
+ */
+static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
+{
+ return (readl(ioaddr) & (1 << offset));
+}
+
/*
* Return GPIO level */
static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- u32 mask = 1 << offset;
struct rb532_gpio_chip *gpch;
gpch = container_of(chip, struct rb532_gpio_chip, chip);
- return readl(gpch->regbase + GPIOD) & mask;
+ return rb532_get_bit(offset, gpch->regbase + GPIOD);
}
/*
static void rb532_gpio_set(struct gpio_chip *chip,
unsigned offset, int value)
{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
struct rb532_gpio_chip *gpch;
- void __iomem *gpvr;
gpch = container_of(chip, struct rb532_gpio_chip, chip);
- gpvr = gpch->regbase + GPIOD;
-
- local_irq_save(flags);
- tmp = readl(gpvr);
- if (value)
- tmp |= mask;
- else
- tmp &= ~mask;
- writel(tmp, gpvr);
- local_irq_restore(flags);
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
}
/*
*/
static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 value;
struct rb532_gpio_chip *gpch;
- void __iomem *gpdr;
gpch = container_of(chip, struct rb532_gpio_chip, chip);
- gpdr = gpch->regbase + GPIOCFG;
- local_irq_save(flags);
- value = readl(gpdr);
- value &= ~mask;
- writel(value, gpdr);
- local_irq_restore(flags);
+ if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
+ return 1; /* alternate function, GPIOCFG is ignored */
+ rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
return 0;
}
static int rb532_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
struct rb532_gpio_chip *gpch;
- void __iomem *gpdr;
gpch = container_of(chip, struct rb532_gpio_chip, chip);
- writel(mask, gpch->regbase + GPIOD);
- gpdr = gpch->regbase + GPIOCFG;
- local_irq_save(flags);
- tmp = readl(gpdr);
- tmp |= mask;
- writel(tmp, gpdr);
- local_irq_restore(flags);
+ if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
+ return 1; /* alternate function, GPIOCFG is ignored */
+ /* set the initial output value */
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+
+ rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
return 0;
}
-/*
- * Set the GPIO interrupt level
- */
-static void rb532_gpio_set_int_level(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
- struct rb532_gpio_chip *gpch;
- void __iomem *gpil;
-
- gpch = container_of(chip, struct rb532_gpio_chip, chip);
- gpil = gpch->regbase + GPIOILEVEL;
-
- local_irq_save(flags);
- tmp = readl(gpil);
- if (value)
- tmp |= mask;
- else
- tmp &= ~mask;
- writel(tmp, gpil);
- local_irq_restore(flags);
-}
+static struct rb532_gpio_chip rb532_gpio_chip[] = {
+ [0] = {
+ .chip = {
+ .label = "gpio0",
+ .direction_input = rb532_gpio_direction_input,
+ .direction_output = rb532_gpio_direction_output,
+ .get = rb532_gpio_get,
+ .set = rb532_gpio_set,
+ .base = 0,
+ .ngpio = 32,
+ },
+ },
+};
/*
- * Get the GPIO interrupt level
+ * Set GPIO interrupt level
*/
-static int rb532_gpio_get_int_level(struct gpio_chip *chip, unsigned offset)
+void rb532_gpio_set_ilevel(int bit, unsigned gpio)
{
- u32 mask = 1 << offset;
- struct rb532_gpio_chip *gpch;
-
- gpch = container_of(chip, struct rb532_gpio_chip, chip);
- return readl(gpch->regbase + GPIOILEVEL) & mask;
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
}
+EXPORT_SYMBOL(rb532_gpio_set_ilevel);
/*
- * Set the GPIO interrupt status
+ * Set GPIO interrupt status
*/
-static void rb532_gpio_set_int_status(struct gpio_chip *chip,
- unsigned offset, int value)
+void rb532_gpio_set_istat(int bit, unsigned gpio)
{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
- struct rb532_gpio_chip *gpch;
- void __iomem *gpis;
-
- gpch = container_of(chip, struct rb532_gpio_chip, chip);
- gpis = gpch->regbase + GPIOISTAT;
-
- local_irq_save(flags);
- tmp = readl(gpis);
- if (value)
- tmp |= mask;
- else
- tmp &= ~mask;
- writel(tmp, gpis);
- local_irq_restore(flags);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
}
+EXPORT_SYMBOL(rb532_gpio_set_istat);
/*
- * Get the GPIO interrupt status
+ * Configure GPIO alternate function
*/
-static int rb532_gpio_get_int_status(struct gpio_chip *chip, unsigned offset)
+static void rb532_gpio_set_func(int bit, unsigned gpio)
{
- u32 mask = 1 << offset;
- struct rb532_gpio_chip *gpch;
-
- gpch = container_of(chip, struct rb532_gpio_chip, chip);
- return readl(gpch->regbase + GPIOISTAT) & mask;
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
}
-static struct rb532_gpio_chip rb532_gpio_chip[] = {
- [0] = {
- .chip = {
- .label = "gpio0",
- .direction_input = rb532_gpio_direction_input,
- .direction_output = rb532_gpio_direction_output,
- .get = rb532_gpio_get,
- .set = rb532_gpio_set,
- .base = 0,
- .ngpio = 32,
- },
- .get_int_level = rb532_gpio_get_int_level,
- .set_int_level = rb532_gpio_set_int_level,
- .get_int_status = rb532_gpio_get_int_status,
- .set_int_status = rb532_gpio_set_int_status,
- },
-};
-
int __init rb532_gpio_init(void)
{
struct resource *r;
return -ENXIO;
}
- /* Set the interrupt status and level for the CF pin */
- rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1);
- rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0);
+ /* configure CF_GPIO_NUM as CFRDY IRQ source */
+ rb532_gpio_set_func(0, CF_GPIO_NUM);
+ rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
+ rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
+ rb532_gpio_set_istat(0, CF_GPIO_NUM);
return 0;
}
} else {
switch (cur) {
/* Bxx (d8,PC) */
- case 0xc0:
- case 0xc1:
- case 0xc2:
- case 0xc3:
- case 0xc4:
- case 0xc5:
- case 0xc6:
- case 0xc7:
- case 0xc8:
- case 0xc9:
- case 0xca:
+ case 0xc0 ... 0xca:
if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
goto fault;
if (!__gdbstub_mark_bp(pc + 2, 0))
break;
/* LXX (d8,PC) */
- case 0xd0:
- case 0xd1:
- case 0xd2:
- case 0xd3:
- case 0xd4:
- case 0xd5:
- case 0xd6:
- case 0xd7:
- case 0xd8:
- case 0xd9:
- case 0xda:
+ case 0xd0 ... 0xda:
if (!__gdbstub_mark_bp(pc + 1, 0))
goto fault;
if (regs->pc != regs->lar &&
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
{
- return d->dev.bus_id;
+ return dev_name(&d->dev);
}
static inline void
typedef unsigned long __kernel_size_t;
typedef long __kernel_ssize_t;
typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#endif
+typedef long __kernel_time_t;
typedef char * __kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
struct task_struct;
#define arch_has_single_step() 1
void user_disable_single_step(struct task_struct *task);
EXPORT_SYMBOL(hppa_dma_ops);
static struct device root = {
- .bus_id = "parisc",
+ .init_name = "parisc",
};
static inline int check_dev(struct device *dev)
static void setup_bus_id(struct parisc_device *padev)
{
struct hardware_path path;
- char *output = padev->dev.bus_id;
+ char name[20];
+ char *output = name;
int i;
get_node_path(padev->dev.parent, &path);
output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
}
sprintf(output, "%u", (unsigned char) padev->hw_path);
+ dev_set_name(&padev->dev, name);
}
struct parisc_device * create_tree_node(char id, struct device *parent)
* being 64 bit in both cases.
*/
-static long translate_usr_offset(long offset)
+static compat_ulong_t translate_usr_offset(compat_ulong_t offset)
{
if (offset < 0)
- return -1;
+ return sizeof(struct pt_regs);
else if (offset <= 32*4) /* gr[0..31] */
return offset * 2 + 4;
else if (offset <= 32*4+32*8) /* gr[0..31] + fr[0..31] */
else if (offset < sizeof(struct pt_regs)/2 + 32*4)
return offset * 2 + 4 - 32*8;
else
- return -1;
+ return sizeof(struct pt_regs);
}
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
if (addr & (sizeof(compat_uint_t)-1))
break;
addr = translate_usr_offset(addr);
- if (addr < 0)
+ if (addr >= sizeof(struct pt_regs))
break;
tmp = *(compat_uint_t *) ((char *) task_regs(child) + addr);
if (addr & (sizeof(compat_uint_t)-1))
break;
addr = translate_usr_offset(addr);
- if (addr < 0)
+ if (addr >= sizeof(struct pt_regs))
break;
if (addr >= PT_FR0 && addr <= PT_FR31 + 4) {
/* Special case, fp regs are 64 bits anyway */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/console.h>
-#include <linux/kallsyms.h>
#include <linux/bug.h>
#include <asm/assembly.h>
DEFINE_SPINLOCK(pa_dbit_lock);
#endif
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs);
static int printbinary(char *buf, unsigned long x, int nbits)
void show_regs(struct pt_regs *regs)
{
- int i;
+ int i, user;
char *level;
unsigned long cr30, cr31;
- level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+ user = user_mode(regs);
+ level = user ? KERN_DEBUG : KERN_CRIT;
print_gr(level, regs);
for (i = 0; i < 8; i += 4)
PRINTREGS(level, regs->sr, "sr", RFMT, i);
- if (user_mode(regs))
+ if (user)
print_fr(level, regs);
cr30 = mfctl(30);
printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n",
level, current_thread_info()->cpu, cr30, cr31);
printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
- printk(level);
- print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
- printk(level);
- print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
- printk(level);
- print_symbol(" RP(r2): %s\n", regs->gr[2]);
-
- parisc_show_stack(current, NULL, regs);
+
+ if (user) {
+ printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+ printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+ printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+ } else {
+ printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+ printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+ printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+ parisc_show_stack(current, NULL, regs);
+ }
}
break;
if (__kernel_text_address(info->ip)) {
- printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
- print_symbol("%s\n", info->ip);
-#else
- if ((i & 0x03) == 0)
- printk("\n");
-#endif
+ printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+ info->ip, (void *) info->ip);
i++;
}
}
- printk("\n");
+ printk(KERN_CRIT "\n");
}
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs)
{
struct unwind_frame_info info;
#size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
+ ethernet0 = &enet1;
+ ethernet1 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
+ cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:49:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+# CONFIG_ACADIA is not set
+# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:20:16 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:31:16 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_OF_GPIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
#
-# I2C system bus drivers (mostly embedded / system-on-chip)
+# Memory mapped GPIO expanders:
#
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
+CONFIG_GPIO_XILINX=y
#
-# External I2C/SMBus adapter drivers
+# I2C GPIO expanders:
#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
+# PCI GPIO expanders:
#
-# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_GPIO_BT8XX is not set
#
-# Other I2C/SMBus bus drivers
+# SPI GPIO expanders:
#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_XILINX=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:11:37 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:12:40 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:56 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:10:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:22 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:11:02 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:13:19 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:13:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:39 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:30 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 18 14:19:54 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:07 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
+CONFIG_SUSPEND_FREEZER=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# Graphics support
#
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
-#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_APPLE is not set
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:28:58 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:06:19 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void set_huge_psize(int psize);
extern void add_gpage(unsigned long addr, unsigned long page_size,
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
#ifdef __powerpc64__
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
- b __init_fpu_44x
+ mflr r4
+ bl __init_fpu_44x
+ bl __fixup_440A_mcheck
+ mtlr r4
+ blr
+
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
- crclr so
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
ACCOUNT_CPU_USER_ENTRY(r10, r11)
+ /*
+ * This "crclr so" clears CR0.SO, which is the error indication on
+ * return from this system call. There must be no cmp instruction
+ * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+ * CR0.SO will get set, causing all system calls to appear to fail.
+ */
+ crclr so
std r2,GPR2(r1)
std r3,GPR3(r1)
std r4,GPR4(r1)
* parsing
*/
dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
BUG_ON(!c->hotpluggable);
+#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
unsigned long __init mmu_mapin_ram(void)
{
- unsigned long v, s;
+ unsigned long v, s, mapped;
phys_addr_t p;
v = KERNELBASE;
s -= LARGE_PAGE_SIZE_4M;
}
- return total_lowmem - s;
+ mapped = total_lowmem - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 16 and 4 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the LMB to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+
+ __initial_memory_limit_addr = memstart_addr + mapped;
+
+ return mapped;
}
return err;
}
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
{
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable limits. */
.priority = 1 /* Must run before sched domains notifier. */
};
+static void mark_reserved_regions_for_nid(int nid)
+{
+ struct pglist_data *node = NODE_DATA(nid);
+ int i;
+
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ unsigned long physbase = lmb.reserved.region[i].base;
+ unsigned long size = lmb.reserved.region[i].size;
+ unsigned long start_pfn = physbase >> PAGE_SHIFT;
+ unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ struct node_active_region node_ar;
+ unsigned long node_end_pfn = node->node_start_pfn +
+ node->node_spanned_pages;
+
+ /*
+ * Check to make sure that this lmb.reserved area is
+ * within the bounds of the node that we care about.
+ * Checking the nid of the start and end points is not
+ * sufficient because the reserved area could span the
+ * entire node.
+ */
+ if (end_pfn <= node->node_start_pfn ||
+ start_pfn >= node_end_pfn)
+ continue;
+
+ get_node_active_region(start_pfn, &node_ar);
+ while (start_pfn < end_pfn &&
+ node_ar.start_pfn < node_ar.end_pfn) {
+ unsigned long reserve_size = size;
+ /*
+ * if reserved region extends past active region
+ * then trim size to active region
+ */
+ if (end_pfn > node_ar.end_pfn)
+ reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+ - (start_pfn << PAGE_SHIFT);
+ dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+ reserve_size, node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
+ reserve_size, BOOTMEM_DEFAULT);
+ /*
+ * if reserved region is contained in the active region
+ * then done.
+ */
+ if (end_pfn <= node_ar.end_pfn)
+ break;
+
+ /*
+ * reserved region extends past the active region
+ * get next active region that contains this
+ * reserved region
+ */
+ start_pfn = node_ar.end_pfn;
+ physbase = start_pfn << PAGE_SHIFT;
+ size = size - reserve_size;
+ get_node_active_region(start_pfn, &node_ar);
+ }
+ }
+}
+
+
void __init do_init_bootmem(void)
{
int nid;
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
- /* Allocate the node structure node local if possible */
+ /*
+ * Allocate the node structure node local if possible
+ *
+ * Be careful moving this around, as it relies on all
+ * previous nodes' bootmem to be initialized and have
+ * all reserved areas marked.
+ */
NODE_DATA(nid) = careful_allocation(nid,
sizeof(struct pglist_data),
SMP_CACHE_BYTES, end_pfn);
start_pfn, end_pfn);
free_bootmem_with_active_regions(nid, end_pfn);
- }
-
- /* Mark reserved regions */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long physbase = lmb.reserved.region[i].base;
- unsigned long size = lmb.reserved.region[i].size;
- unsigned long start_pfn = physbase >> PAGE_SHIFT;
- unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
- struct node_active_region node_ar;
-
- get_node_active_region(start_pfn, &node_ar);
- while (start_pfn < end_pfn &&
- node_ar.start_pfn < node_ar.end_pfn) {
- unsigned long reserve_size = size;
- /*
- * if reserved region extends past active region
- * then trim size to active region
- */
- if (end_pfn > node_ar.end_pfn)
- reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- - (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
- reserve_size, node_ar.nid);
- reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- reserve_size, BOOTMEM_DEFAULT);
- /*
- * if reserved region is contained in the active region
- * then done.
- */
- if (end_pfn <= node_ar.end_pfn)
- break;
-
- /*
- * reserved region extends past the active region
- * get next active region that contains this
- * reserved region
- */
- start_pfn = node_ar.end_pfn;
- physbase = start_pfn << PAGE_SHIFT;
- size = size - reserve_size;
- get_node_active_region(start_pfn, &node_ar);
- }
-
- }
-
- for_each_online_node(nid)
+ /*
+ * Be very careful about moving this around. Future
+ * calls to careful_allocation() depend on this getting
+ * done correctly.
+ */
+ mark_reserved_regions_for_nid(nid);
sparse_memory_present_with_active_regions(nid);
+ }
}
void __init paging_init(void)
struct axon_msic *msic = get_irq_data(irq);
u32 write_offset, msi;
int idx;
+ int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
- while (msic->read_offset != write_offset) {
+ while (msic->read_offset != write_offset && retry < 100) {
idx = msic->read_offset / sizeof(__le32);
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
pr_debug("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
+ if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+ generic_handle_irq(msi);
+ msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
+ } else {
+ /*
+ * Reading the MSIC_WRITE_OFFSET_REG does not
+ * reliably flush the outstanding DMA to the
+ * FIFO buffer. Here we were reading stale
+ * data, so we need to retry.
+ */
+ udelay(1);
+ retry++;
+ pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ continue;
+ }
+
+ if (retry) {
+ pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ msi, retry);
+ retry = 0;
+ }
+
msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
msic->read_offset &= MSIC_FIFO_SIZE_MASK;
+ }
- if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host)
- generic_handle_irq(msi);
- else
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ if (retry) {
+ printk(KERN_WARNING "axon_msi: irq timed out\n");
+
+ msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
+ msic->read_offset &= MSIC_FIFO_SIZE_MASK;
}
desc->chip->eoi(irq);
dn->full_name);
goto out_free_fifo;
}
+ memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
NR_IRQS, &msic_host_ops, 0);
return cpus_weight(cpu_possible_map);
}
-static void __devinit smp_iic_setup_cpu(int cpu)
+static void __devinit smp_cell_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
iic_setup_cpu();
+
+ /*
+ * change default DABRX to allow user watchpoints
+ */
+ mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
static DEFINE_SPINLOCK(timebase_lock);
.message_pass = smp_iic_message_pass,
.probe = smp_iic_probe,
.kick_cpu = smp_cell_kick_cpu,
- .setup_cpu = smp_iic_setup_cpu,
+ .setup_cpu = smp_cell_setup_cpu,
.cpu_bootable = smp_cell_cpu_bootable,
};
if (offset >= ps_size)
return VM_FAULT_SIGBUS;
+ if (fatal_signal_pending(current))
+ return VM_FAULT_SIGBUS;
+
/*
* Because we release the mmap_sem, the context may be destroyed while
* we're in spu_wait. Grab an extra reference so it isn't destroyed
answer Y or M. Otherwise say N.
config PPC_BESTCOMM_ATA
- tristate "Bestcomm ATA task support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the ATA task.
config PPC_BESTCOMM_FEC
- tristate "Bestcomm FEC tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the FEC tasks.
config PPC_BESTCOMM_GEN_BD
- tristate "Bestcomm GenBD tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the GenBD tasks.
void __init mpic_init(struct mpic *mpic)
{
int i;
+ int cpu;
BUG_ON(mpic->num_sources == 0);
mpic_pasemi_msi_init(mpic);
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+ else
+ cpu = 0;
+
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i |
continue;
/* init hw */
mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
- mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
- 1 << hard_smp_processor_id());
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
}
/* Init spurious vector */
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
- res.start, regs);
+ printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+ (unsigned long long) res.start, regs);
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 19:43:29 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Nov 27 11:00:49 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_GROUP_SCHED=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Base setup
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# I/O subsystem configuration
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=m
+CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PCMCIA is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
+# CONFIG_REGULATOR is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
# CONFIG_ZCRYPT_MONOLITHIC is not set
# Library routines
#
CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- if (mm->context.has_pgste)
- ptep_rcp_copy(ptep);
pte_val(*ptep) = _PAGE_TYPE_EMPTY;
if (mm->context.noexec)
pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
psw_t psw;
unsigned long gprs[NUM_GPRS];
unsigned long orig_gpr2;
+ unsigned short svcnr;
unsigned short ilc;
- unsigned short trap;
};
#endif
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define user_stack_pointer(regs)((regs)->gprs[15])
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- if (regs->trap != __LC_SVC_OLD_PSW)
- return -1;
- return regs->gprs[2];
+ return regs->svcnr ? regs->svcnr : -1;
}
static inline void syscall_rollback(struct task_struct *task,
unsigned int i, unsigned int n,
unsigned long *args)
{
+ unsigned long mask = -1UL;
+
BUG_ON(i + n > 6);
#ifdef CONFIG_COMPAT
- if (test_tsk_thread_flag(task, TIF_31BIT)) {
- if (i + n == 6)
- args[--n] = (u32) regs->args[0];
- while (n-- > 0)
- args[n] = (u32) regs->gprs[2 + i + n];
- }
+ if (test_tsk_thread_flag(task, TIF_31BIT))
+ mask = 0xffffffff;
#endif
if (i + n == 6)
- args[--n] = regs->args[0];
- memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0]));
+ args[--n] = regs->args[0] & mask;
+ while (n-- > 0)
+ if (i + n > 0)
+ args[n] = regs->gprs[2 + i + n] & mask;
+ if (i == 0)
+ args[0] = regs->orig_gpr2 & mask;
}
static inline void syscall_set_arguments(struct task_struct *task,
BUG_ON(i + n > 6);
if (i + n == 6)
regs->args[0] = args[--n];
- memcpy(®s->gprs[2 + i], args, n * sizeof(args[0]));
+ while (n-- > 0)
+ if (i + n > 0)
+ regs->gprs[2 + i + n] = args[n];
+ if (i == 0)
+ regs->orig_gpr2 = args[0];
}
#endif /* _ASM_SYSCALL_H */
DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
- DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap));
+ DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
return err;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
.macro CREATE_STACK_FRAME psworg,savearea
s %r15,BASED(.Lc_spsize) # make room for registers & psw
mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
st %r12,__SF_BACKCHAIN(%r15) # clear back chain
#endif
sysc_do_svc:
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- sla %r7,2 # *4 and test for svc 0
+ ltr %r7,%r7 # test for svc 0
bnz BASED(sysc_nr_ok) # svc number > 0
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
bnl BASED(sysc_nr_ok)
lr %r7,%r1 # copy svc number to %r7
- sla %r7,2 # *4
sysc_nr_ok:
mvc SP_ARGS(4,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sll %r7,2 # svc number *4
l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
l %r8,0(%r7,%r8) # get system call addr.
sysc_restart:
ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
l %r7,SP_R2(%r15) # load new svc number
- sla %r7,2
mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
lm %r2,%r6,SP_R2(%r15) # load svc arguments
b BASED(sysc_do_restart) # restart svc
#
sysc_singlestep:
ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_return) # load adr. of system return
bnl BASED(sysc_tracenogo)
l %r8,BASED(.Lsysc_table)
lr %r7,%r2
- sll %r7,2 # *4
+ sll %r7,2 # svc number *4
l %r8,0(%r7,%r8)
sysc_tracego:
lm %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_restore)# load adr. of system return
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
.macro CREATE_STACK_FRAME psworg,savearea
aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- slag %r7,%r7,2 # *4 and test for svc 0
+ ltgr %r7,%r7 # test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
- slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sllg %r7,%r7,2 # svc number * 4
larl %r10,sys_call_table
#ifdef CONFIG_COMPAT
tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ?
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
- slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
- ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
lghi %r0,NR_syscalls
clgr %r0,%r2
jnh sysc_tracenogo
- slag %r7,%r2,2 # *4
+ sllg %r7,%r2,2 # svc number *4
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_restore # load adr. of system ret, no work
jg do_single_step # branch to do_single_step
/*
* Initial thread structure.
*
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD_SIZE aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
* debugger stored an invalid system call number. Skip
* the system call and the system call restart handling.
*/
- regs->trap = -1;
+ regs->svcnr = 0;
ret = -1;
}
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
oldset = ¤t->blocked;
/* Are we from a system call? */
- if (regs->trap == __LC_SVC_OLD_PSW) {
+ if (regs->svcnr) {
continue_addr = regs->psw.addr;
restart_addr = continue_addr - regs->ilc;
retval = regs->gprs[2];
case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
- regs->trap = -1; /* Don't deal with this again. */
+ regs->svcnr = 0; /* Don't deal with this again. */
}
/* Get signal to deliver. When running under ptrace, at this point
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 jiffies_timer_cc;
+static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
*/
unsigned long long sched_clock(void)
{
- return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
}
/*
*/
void __init time_init(void)
{
- u64 init_timer_cc;
-
- init_timer_cc = reset_tod_clock();
- jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+ sched_clock_base_cc = reset_tod_clock();
/* set xtime */
- tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
delta = -delta;
adjust.offset = -ticks * (1000000 / HZ);
}
- jiffies_timer_cc += delta;
+ sched_clock_base_cc += delta;
if (adjust.offset != 0) {
printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
adjust.offset);
* Written by Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
+#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
}
_edata = .; /* End of data section */
- . = ALIGN(2 * PAGE_SIZE); /* init_task */
+ . = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : {
*(.data.init_task)
}
};
extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define force_successful_syscall_return() \
do { current_thread_info()->syscall_noerror = 1; \
} while (0)
tcflag_t c_cflag; /* control mode flags */
tcflag_t c_lflag; /* local mode flags */
cc_t c_line; /* line discipline */
+#ifndef __KERNEL__
cc_t c_cc[NCCS]; /* control characters */
-#ifdef __KERNEL__
+#else
+ cc_t c_cc[NCCS+2]; /* kernel needs 2 more to hold vmin/vtime */
#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
- cc_t _x_cc[2]; /* We need them to hold vmin/vtime */
#endif
};
tcflag_t c_cflag; /* control mode flags */
tcflag_t c_lflag; /* local mode flags */
cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- cc_t _x_cc[2]; /* padding to match ktermios */
+ cc_t c_cc[NCCS+2]; /* control characters */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
};
tcflag_t c_cflag; /* control mode flags */
tcflag_t c_lflag; /* local mode flags */
cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- cc_t _x_cc[2]; /* We need them to hold vmin/vtime */
+ cc_t c_cc[NCCS+2]; /* control characters */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
};
#define __NR_dup3 320
#define __NR_pipe2 321
#define __NR_inotify_init1 322
+#define __NR_accept4 323
-#define NR_SYSCALLS 323
+#define NR_SYSCALLS 324
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
* it never had the plain ones and there is no value to adding those
#define __NR_dup3 320
#define __NR_pipe2 321
#define __NR_inotify_init1 322
+#define __NR_accept4 323
-#define NR_SYSCALLS 323
+#define NR_SYSCALLS 324
#ifdef __KERNEL__
#define __ARCH_WANT_IPC_PARSE_VERSION
unsigned int fsr_storage;
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
{
int psr_impl, psr_vers, fpu_vers;
int i, psr;
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .text
+ .section .text.head,"ax"
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
op->dev.parent = parent;
op->dev.bus = &of_platform_bus_type;
if (!parent)
- strcpy(op->dev.bus_id, "root");
+ dev_set_name(&op->dev, "root");
else
- sprintf(op->dev.bus_id, "%08x", dp->node);
+ dev_set_name(&op->dev, "%08x", dp->node);
if (of_device_register(op)) {
printk("%s: Could not register of device.\n",
#include "irq.h"
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
unsigned char boot_cpu_id = 0;
unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
panic("SMP bolixed\n");
}
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
void smp_send_reschedule(int cpu)
{
"i" (ASI_M_CTL));
}
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
{
int cpuid = hard_smp4d_processor_id();
extern spinlock_t sun4d_imsk_lock;
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = hard_smp4d_processor_id();
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
/*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
/*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
/*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1
+/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
- __INIT
+ __CPUINIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
- __INIT
+ __CPUINIT
.align 4
sun4d_cpu_startup:
.text 0xf0004000 :
{
_text = .;
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
/* Paging initialization on the Sparc Reference MMU. */
extern void sparc_context_init(int);
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
(int)vac_cache_size, (int)vac_line_size);
}
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
{
volatile unsigned long clear;
unsigned long mreg = srmmu_get_mmureg();
hypersparc_setup_blockops();
}
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long faddr, tagval;
init_cypress_common();
}
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
{
unsigned long mreg;
}
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long ccreg;
poke_srmmu = poke_turbosparc;
}
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
{
unsigned long mreg = srmmu_get_mmureg();
tsunami_setup_blockops();
}
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
{
unsigned long mreg = srmmu_get_mmureg();
static int smp_catch;
return kern_base + (val - KERNBASE);
}
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
*/
static struct thread_info *cpu_new_thread = NULL;
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
{
struct trap_per_cpu *tb = &trap_block[cpu];
unsigned long entry =
sys32_socketcall: /* %o0=call, %o1=args */
cmp %o0, 1
bl,pn %xcc, do_einval
- cmp %o0, 17
+ cmp %o0, 18
bg,pn %xcc, do_einval
sub %o0, 1, %o0
sllx %o0, 5, %o0
nop
nop
nop
+do_sys_accept4: /* sys_accept4(int, struct sockaddr *, int *, int) */
+63: ldswa [%o1 + 0x0] %asi, %o0
+ sethi %hi(sys_accept4), %g1
+64: lduwa [%o1 + 0x8] %asi, %o2
+65: ldswa [%o1 + 0xc] %asi, %o3
+ jmpl %g1 + %lo(sys_accept4), %g0
+66: lduwa [%o1 + 0x4] %asi, %o1
+ nop
+ nop
.section __ex_table,"a"
.align 4
.word 57b, __retl_efault, 58b, __retl_efault
.word 59b, __retl_efault, 60b, __retl_efault
.word 61b, __retl_efault, 62b, __retl_efault
+ .word 63b, __retl_efault, 64b, __retl_efault
+ .word 65b, __retl_efault, 66b, __retl_efault
.previous
.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
/*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
#endif /* CONFIG_COMPAT */
.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
/*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
config NUMA
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && BROKEN)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
help
{
u8 pending;
asm volatile("int $0x16; setnz %0"
- : "=rm" (pending)
+ : "=qm" (pending)
: "a" (0x0100));
return pending;
}
#ifndef _ASM_X86_DS_H
#define _ASM_X86_DS_H
-#ifdef CONFIG_X86_DS
#include <linux/types.h>
#include <linux/init.h>
+#ifdef CONFIG_X86_DS
+
struct task_struct;
/*
#else /* CONFIG_X86_DS */
-#define ds_init_intel(config) do {} while (0)
+struct cpuinfo_x86;
+static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
#endif /* CONFIG_X86_DS */
#endif /* _ASM_X86_DS_H */
extern int early_pfn_to_nid(unsigned long pfn);
+extern void resume_map_numa_kva(pgd_t *pgd);
+
#else /* !CONFIG_NUMA */
#define get_memcfg_numa get_memcfg_numa_flat
+static inline void resume_map_numa_kva(pgd_t *pgd) {}
+
#endif /* CONFIG_NUMA */
#ifdef CONFIG_DISCONTIGMEM
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_X86_PCI_64_H */
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
return ret;
case 10:
__get_user_asm(*(u64 *)dst, (u64 __user *)src,
- ret, "q", "", "=r", 16);
+ ret, "q", "", "=r", 10);
if (unlikely(ret))
return ret;
__get_user_asm(*(u16 *)(8 + (char *)dst),
__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
#define __NR_timerfd_gettime 287
__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
-#define __NR_paccept 288
-__SYSCALL(__NR_paccept, sys_paccept)
+#define __NR_accept4 288
+__SYSCALL(__NR_accept4, sys_accept4)
#define __NR_signalfd4 289
__SYSCALL(__NR_signalfd4, sys_signalfd4)
#define __NR_eventfd2 290
obj-y += process.o
obj-y += i387.o xsave.o
obj-y += ptrace.o
-obj-y += ds.o
+obj-$(CONFIG_X86_DS) += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
address >>= PAGE_SHIFT;
iommu_area_free(dom->bitmap, address, pages);
- if (address + pages >= dom->next_bit)
+ if (address >= dom->next_bit)
dom->need_flush = true;
}
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
-int amd_iommu_isolate; /* if 1, device isolation is enabled */
+int amd_iommu_isolate = 1; /* if 1, device isolation is enabled */
bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
for (; *str; ++str) {
if (strncmp(str, "isolate", 7) == 0)
amd_iommu_isolate = 1;
- if (strncmp(str, "fullflush", 11) == 0)
+ if (strncmp(str, "share", 5) == 0)
+ amd_iommu_isolate = 0;
+ if (strncmp(str, "fullflush", 9) == 0)
amd_iommu_unmap_flush = true;
}
}
}
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
u32 i = 0;
if (cpu_family == CPU_HW_PSTATE) {
- rdmsr(MSR_PSTATE_STATUS, lo, hi);
- i = lo & HW_PSTATE_MASK;
- data->currpstate = i;
+ if (data->currpstate == HW_PSTATE_INVALID) {
+ /* read (initial) hw pstate if not yet set */
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+
+ /*
+ * a workaround for family 11h erratum 311 might cause
+ * an "out-of-range Pstate if the core is in Pstate-0
+ */
+ if (i >= data->numps)
+ data->currpstate = HW_PSTATE_0;
+ else
+ data->currpstate = i;
+ }
return 0;
}
do {
}
data->cpu = pol->cpu;
+ data->currpstate = HW_PSTATE_INVALID;
if (powernow_k8_cpu_init_acpi(data)) {
/*
* http://www.gnu.org/licenses/gpl.html
*/
+
+enum pstate {
+ HW_PSTATE_INVALID = 0xff,
+ HW_PSTATE_0 = 0,
+ HW_PSTATE_1 = 1,
+ HW_PSTATE_2 = 2,
+ HW_PSTATE_3 = 3,
+ HW_PSTATE_4 = 4,
+ HW_PSTATE_5 = 5,
+ HW_PSTATE_6 = 6,
+ HW_PSTATE_7 = 7,
+};
+
struct powernow_k8_data {
unsigned int cpu;
u32 exttype; /* extended interface = 1 */
/* keep track of the current fid / vid or pstate */
- u32 currvid, currfid, currpstate;
+ u32 currvid;
+ u32 currfid;
+ enum pstate currpstate;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
*/
-#ifdef CONFIG_X86_DS
-
#include <asm/ds.h>
#include <linux/errno.h>
static inline struct ds_context *ds_get_context(struct task_struct *task)
{
struct ds_context *context;
+ unsigned long irq;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
context = (task ? task->thread.ds_ctx : this_system_context);
if (context)
context->count++;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
return context;
}
/*
* Same as ds_get_context, but allocates the context and it's DS
* structure, if necessary; returns NULL; if out of memory.
- *
- * pre: requires ds_lock to be held
*/
static inline struct ds_context *ds_alloc_context(struct task_struct *task)
{
struct ds_context **p_context =
(task ? &task->thread.ds_ctx : &this_system_context);
struct ds_context *context = *p_context;
+ unsigned long irq;
if (!context) {
- spin_unlock(&ds_lock);
-
context = kzalloc(sizeof(*context), GFP_KERNEL);
-
- if (!context) {
- spin_lock(&ds_lock);
+ if (!context)
return NULL;
- }
context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
if (!context->ds) {
kfree(context);
- spin_lock(&ds_lock);
return NULL;
}
- spin_lock(&ds_lock);
- /*
- * Check for race - another CPU could have allocated
- * it meanwhile:
- */
+ spin_lock_irqsave(&ds_lock, irq);
+
if (*p_context) {
kfree(context->ds);
kfree(context);
- return *p_context;
- }
- *p_context = context;
+ context = *p_context;
+ } else {
+ *p_context = context;
- context->this = p_context;
- context->task = task;
+ context->this = p_context;
+ context->task = task;
- if (task)
- set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+ if (task)
+ set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
- if (!task || (task == current))
- wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
-
- get_tracer(task);
+ if (!task || (task == current))
+ wrmsrl(MSR_IA32_DS_AREA,
+ (unsigned long)context->ds);
+ }
+ spin_unlock_irqrestore(&ds_lock, irq);
}
context->count++;
*/
static inline void ds_put_context(struct ds_context *context)
{
+ unsigned long irq;
+
if (!context)
return;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
if (--context->count)
goto out;
kfree(context->ds);
kfree(context);
out:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
}
struct ds_context *context;
unsigned long buffer, adj;
const unsigned long alignment = (1 << 3);
+ unsigned long irq;
int error = 0;
if (!ds_cfg.sizeof_ds)
return -EOPNOTSUPP;
- spin_lock(&ds_lock);
-
- error = -ENOMEM;
context = ds_alloc_context(task);
if (!context)
- goto out_unlock;
+ return -ENOMEM;
+
+ spin_lock_irqsave(&ds_lock, irq);
error = -EPERM;
if (!check_tracer(task))
goto out_unlock;
+ get_tracer(task);
+
error = -EALREADY;
if (context->owner[qual] == current)
- goto out_unlock;
+ goto out_put_tracer;
error = -EPERM;
if (context->owner[qual] != NULL)
- goto out_unlock;
+ goto out_put_tracer;
context->owner[qual] = current;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
error = -ENOMEM;
out_release:
context->owner[qual] = NULL;
ds_put_context(context);
+ put_tracer(task);
+ return error;
+
+ out_put_tracer:
+ spin_unlock_irqrestore(&ds_lock, irq);
+ ds_put_context(context);
+ put_tracer(task);
return error;
out_unlock:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
ds_put_context(context);
return error;
}
.sizeof_ds = sizeof(long) * 12,
.sizeof_field = sizeof(long),
.sizeof_rec[ds_bts] = sizeof(long) * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = sizeof(long) * 10
+#else
+ .sizeof_rec[ds_pebs] = sizeof(long) * 18
+#endif
};
static const struct ds_configuration ds_cfg_64 = {
.sizeof_ds = 8 * 12,
.sizeof_field = 8,
.sizeof_rec[ds_bts] = 8 * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = 8 * 10
+#else
+ .sizeof_rec[ds_pebs] = 8 * 18
+#endif
};
static inline void
while (leftovers--)
ds_put_context(context);
}
-#endif /* CONFIG_X86_DS */
stts();
}
-void __init init_thread_xstate(void)
+void __cpuinit init_thread_xstate(void)
{
if (!HAVE_HWFP) {
xstate_size = sizeof(struct i387_soft_struct);
cfg->vector = 0;
cpus_clear(cfg->domain);
+
+ if (likely(!cfg->move_in_progress))
+ return;
+ cpus_and(mask, cfg->old_domain, cpu_online_map);
+ for_each_cpu_mask_nr(cpu, mask) {
+ for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
+ vector++) {
+ if (per_cpu(vector_irq, cpu)[vector] != irq)
+ continue;
+ per_cpu(vector_irq, cpu)[vector] = -1;
+ break;
+ }
+ }
+ cfg->move_in_progress = 0;
}
void __setup_vector_irq(int cpu)
int __init probe_nr_irqs(void)
{
- int idx;
- int nr = 0;
-#ifndef CONFIG_XEN
- int nr_min = 32;
-#else
- int nr_min = NR_IRQS;
-#endif
-
- for (idx = 0; idx < nr_ioapics; idx++)
- nr += io_apic_get_redir_entries(idx) + 1;
-
- /* double it for hotplug and msi and nmi */
- nr <<= 1;
-
- /* something wrong ? */
- if (nr < nr_min)
- nr = nr_min;
- if (WARN_ON(nr > NR_IRQS))
- nr = NR_IRQS;
-
- return nr;
+ return NR_IRQS;
}
/* --------------------------------------------------------------------------
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
+ struct irq_desc *desc;
struct irq_cfg *cfg;
+ cpumask_t mask;
if (skip_ioapic_setup == 1)
return;
* cpu is online.
*/
cfg = irq_cfg(irq);
- if (!cfg->vector)
+ if (!cfg->vector) {
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
+ continue;
+
+ }
+
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ desc = irq_to_desc(irq);
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = TARGET_CPUS;
+
#ifdef CONFIG_INTR_REMAP
- else if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, mask);
else
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
+ set_ioapic_affinity_irq(irq, mask);
}
}
}
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
{
/*
* Now that the first cpu already had this clocksource initialized,
++p;
if (*p == '\0')
break;
- bridge = simple_strtol(p, &endp, 0);
+ bridge = simple_strtoul(p, &endp, 0);
if (p == endp)
break;
DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
},
},
+ { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */
+ .callback = set_bios_reboot,
+ .ident = "Dell OptiPlex 330",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"),
+ DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
+ },
+ },
{ /* Handle problems with rebooting on Dell 2400's */
.callback = set_bios_reboot,
.ident = "Dell PowerEdge 2400",
.callback = dmi_low_memory_corruption,
.ident = "Phoenix BIOS",
.matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
#endif
/*
* Enable and initialize the xsave feature.
*/
-void __init xsave_cntxt_init(void)
+void __ref xsave_cntxt_init(void)
{
unsigned int eax, ebx, ecx, edx;
}
}
+#ifdef CONFIG_HIBERNATION
+/**
+ * resume_map_numa_kva - add KVA mapping to the temporary page tables created
+ * during resume from hibernation
+ * @pgd_base - temporary resume page directory
+ */
+void resume_map_numa_kva(pgd_t *pgd_base)
+{
+ int node;
+
+ for_each_online_node(node) {
+ unsigned long start_va, start_pfn, size, pfn;
+
+ start_va = (unsigned long)node_remap_start_vaddr[node];
+ start_pfn = node_remap_start_pfn[node];
+ size = node_remap_size[node];
+
+ printk(KERN_DEBUG "%s: node %d\n", __FUNCTION__, node);
+
+ for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) {
+ unsigned long vaddr = start_va + (pfn << PAGE_SHIFT);
+ pgd_t *pgd = pgd_base + pgd_index(vaddr);
+ pud_t *pud = pud_offset(pgd, vaddr);
+ pmd_t *pmd = pmd_offset(pud, vaddr);
+
+ set_pmd(pmd, pfn_pmd(start_pfn + pfn,
+ PAGE_KERNEL_LARGE_EXEC));
+
+ printk(KERN_DEBUG "%s: %08lx -> pfn %08lx\n",
+ __FUNCTION__, vaddr, start_pfn + pfn);
+ }
+ }
+}
+#endif
+
static unsigned long calculate_numa_remap_pages(void)
{
int nid;
int i;
if (!reset_value) {
- reset_value = kmalloc(sizeof(unsigned) * num_counters,
+ reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
GFP_ATOMIC);
if (!reset_value)
return;
pci_siemens_interrupt_controller);
/*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes. Even if the device is capable, that doesn't mean we can
- * access it. Maybe we don't have a way to generate extended config space
- * accesses. So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
*/
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
{
dev->cfg_size = pci_cfg_space_size_ext(dev);
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
/*
* SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
#include <asm/system.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/mmzone.h>
/* Defined in hibernate_asm_32.S */
extern int restore_image(void);
}
}
}
+
+ resume_map_numa_kva(pgd_base);
+
return 0;
}
* For 64-bit, we must skip the Xen hole in the middle of the address
* space, just after the big x86-64 virtual hole.
*/
-static int xen_pgd_walk(struct mm_struct *mm,
- int (*func)(struct mm_struct *mm, struct page *,
- enum pt_level),
- unsigned long limit)
+static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
{
- pgd_t *pgd = mm->pgd;
int flush = 0;
unsigned hole_low, hole_high;
unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
return flush;
}
+static int xen_pgd_walk(struct mm_struct *mm,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
+{
+ return __xen_pgd_walk(mm, mm->pgd, func, limit);
+}
+
/* If we're using split pte locks, then take the page's lock and
return a pointer to it. Otherwise return NULL. */
static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
xen_mc_batch();
- if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
+ if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
/* re-enable interrupts for flushing */
xen_mc_issue(0);
PT_PMD);
#endif
- xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
+ __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
xen_mc_issue(0);
}
alternatives_smp_switch(0);
}
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
void xen_mark_init_mm_pinned(void);
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
return PTR_ERR(bio);
if (bio->bi_size != len) {
+ /*
+ * Grab an extra reference to this bio, as bio_unmap_user()
+ * expects to be able to drop it twice as it happens on the
+ * normal IO completion path
+ */
+ bio_get(bio);
bio_endio(bio, 0);
bio_unmap_user(bio);
return -EINVAL;
bdev_map = kobj_map_init(base_probe, &block_class_lock);
blk_dev_init();
+ register_blkdev(BLOCK_EXT_MAJOR, "blkext");
+
#ifndef CONFIG_SYSFS_DEPRECATED
/* create top-level block dir */
block_depr = kobject_create_and_add("block", NULL);
struct disk_part_iter piter;
long long start, length;
int partno;
- int err;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
disk_part_iter_exit(&piter);
/* all seems OK */
- err = add_partition(disk, partno, start, length,
- ADDPART_FLAG_NONE);
+ part = add_partition(disk, partno, start, length,
+ ADDPART_FLAG_NONE);
mutex_unlock(&bdev->bd_mutex);
- return err;
+ return IS_ERR(part) ? PTR_ERR(part) : 0;
case BLKPG_DEL_PARTITION:
part = disk_get_part(disk, partno);
if (!part)
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
+ /* if power units are mW, convert to mA by
+ dividing by current voltage (mV/1000) */
+ if (!battery->power_unit) {
+ if (battery->voltage_now) {
+ val->intval /= battery->voltage_now;
+ val->intval *= 1000;
+ } else
+ val->intval = -1;
+ }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
dev->wakeup.state.enabled ? "enabled" : "disabled");
if (ldev)
seq_printf(seq, "%s:%s",
- dev_name(ldev) ? ldev->bus->name : "no-bus",
+ ldev->bus ? ldev->bus->name : "no-bus",
dev_name(ldev));
seq_printf(seq, "\n");
put_device(ldev);
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
toshiba_acpi_exit();
return ret;
}
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
return 1;
+ /* TECRA M4 sometimes forgets its identify and reports bogus
+ * DMI information. As the bogus information is a bit
+ * generic, match as many entries as possible. This manual
+ * matching is necessary because dmi_system_id.matches is
+ * limited to four entries.
+ */
+ if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+ return 1;
+
return 0;
}
}
}
+ if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+ "firmware update to be fully functional.\n");
+ ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
+ "or visit http://ata.wiki.kernel.org.\n");
+ }
+
return 0;
err_out_nosup:
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
+ /* Seagate NCQ + FLUSH CACHE firmware bug */
+ { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
+#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
+ int retlen = buflen;
if (write_data) {
for (; buflen > 0; buflen--, buf++)
}
rb532_pata_finish_io(adev->link->ap);
+ return retlen;
}
static void rb532_pata_freeze(struct ata_port *ap)
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
+ printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
creq->nr_sectors, seg);
#endif /* CCISS_DEBUG */
c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
#ifdef CCISS_DEBUG
- printk("address 0 = %x\n", c->paddr);
+ printk("address 0 = %lx\n", c->paddr);
#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
#endif /* CCISS_DEBUG */
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
- printk("cfg base address index = %x\n", cfg_base_addr_index);
+ printk("cfg base address index = %llx\n",
+ (unsigned long long)cfg_base_addr_index);
#endif /* CCISS_DEBUG */
if (cfg_base_addr_index == -1) {
printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
#ifdef CCISS_DEBUG
- printk("cfg offset = %x\n", cfg_offset);
+ printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
{
struct request_queue *rq;
+ elevator_t *old_e;
rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
if (rq == NULL)
return -1;
- elevator_init(rq, "noop");
+ old_e = rq->elevator;
+ if (IS_ERR_VALUE(elevator_init(rq, "noop")))
+ printk(KERN_WARNING
+ "blkfront: Switch elevator failed, use default\n");
+ else
+ elevator_exit(old_e);
/* Hard sector size and max sectors impersonate the equiv. hardware. */
blk_queue_hardsect_size(rq, sector_size);
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
static int uninorth_rev;
static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
static int uninorth_fetch_size(void)
{
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = tty_driver_kref_get(console_device(&index));
- if (driver) {
- /* Don't let /dev/console block */
- filp->f_flags |= O_NONBLOCK;
- noctty = 1;
- goto got_driver;
+ struct tty_driver *console_driver = console_device(&index);
+ if (console_driver) {
+ driver = tty_driver_kref_get(console_driver);
+ if (driver) {
+ /* Don't let /dev/console block */
+ filp->f_flags |= O_NONBLOCK;
+ noctty = 1;
+ goto got_driver;
+ }
}
mutex_unlock(&tty_mutex);
return -ENODEV;
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at %Lx\n",
- regs_res->start);
+ (unsigned long long) regs_res->start);
retval = -EBUSY;
goto failed1;
}
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %Lx\n",
- (unsigned long int)drvdata->mem_start,
- drvdata->base_address, drvdata->mem_size);
+ dev_info(dev, "ioremap %llx to %p with size %llx\n",
+ (unsigned long long) drvdata->mem_start,
+ drvdata->base_address,
+ (unsigned long long) drvdata->mem_size);
cdev_init(&drvdata->cdev, &hwicap_fops);
drvdata->cdev.owner = THIS_MODULE;
return ret;
}
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
.name = "talitos",
.match_table = talitos_match,
.probe = talitos_probe,
- .remove = __devexit_p(talitos_remove),
+ .remove = talitos_remove,
};
static int __init talitos_init(void)
* already registered driver
*/
-static int i82875p_registered = 1;
-
static struct edac_pci_ctl_info *i82875p_pci;
static void i82875p_get_error_info(struct mem_ctl_info *mci,
"%s(): pci_bus_add_device() Failed\n",
__func__);
}
+ pci_bus_assign_resources(dev->bus);
}
*ovrfl_pdev = dev;
goto fail0;
}
+ /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
+ kobject_get(&mci->edac_mci_kobj);
+
debugf3("%s(): init mci\n", __func__);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
return 0;
fail1:
+ kobject_put(&mci->edac_mci_kobj);
edac_mc_free(mci);
fail0:
{
debugf3("%s()\n", __func__);
+ i82875p_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+
pci_unregister_driver(&i82875p_driver);
- if (!i82875p_registered) {
- i82875p_remove_one(mci_pdev);
- pci_dev_put(mci_pdev);
- }
}
module_init(i82875p_init);
.model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod mini */ {
.firmware_revision = 0x0a2700,
.model = 0x000023,
continue;
is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
- seq_printf(s, " gpio-%-3d (%-12s) %s %s",
+ seq_printf(s, " gpio-%-3d (%-20.20s) %s %s",
gpio, gdesc->label,
is_out ? "out" : "in ",
chip->get
return;
}
+ drm_vblank_cleanup(dev);
+
drm_lastclose(dev);
if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
}
}
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
{
/* Bail if the driver didn't call drm_vblank_init() */
if (dev->num_crtcs == 0)
free_irq(dev->pdev->irq, dev);
- drm_vblank_cleanup(dev);
-
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
spin_lock_init(&dev_priv->user_irq_lock);
+ ret = drm_vblank_init(dev, I915_NUM_PIPE);
+
+ if (ret) {
+ (void) i915_driver_unload(dev);
+ return ret;
+ }
+
return ret;
}
PIPE_B,
};
+#define I915_NUM_PIPE 2
+
/* Interface history:
*
* 1.1: Original.
int user_irq_refcount;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
+ u32 pipestat[2];
int tex_lru_log_granularity;
int allow_batchbuffer;
u32 saveDSPBCNTR;
u32 saveDSPARB;
u32 saveRENDERSTANDBY;
+ u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
struct drm_file *file_priv);
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
struct drm_file *file_priv);
#include "i915_drv.h"
#include <linux/swap.h>
+#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
static int
i915_gem_object_set_domain(struct drm_gem_object *obj,
uint32_t read_domains,
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_get_aperture *args = data;
- struct drm_i915_gem_object *obj_priv;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
args->aper_size = dev->gtt_total;
- args->aper_available_size = args->aper_size;
-
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
- if (obj_priv->pin_count > 0)
- args->aper_available_size -= obj_priv->obj->size;
- }
+ args->aper_available_size = (args->aper_size -
+ atomic_read(&dev->pin_memory));
return 0;
}
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
- if (obj_priv->gtt_space == NULL) {
- /* We evicted the buffer in the process of validating
- * our set of buffers in. We could try to recover by
- * kicking them everything out and trying again from
- * the start.
- */
- ret = -ENOMEM;
- goto err;
- }
/* make sure all previous memory operations have passed */
ret = i915_gem_object_set_domain(obj,
i915_gem_retire_requests(dev);
- /* Active and flushing should now be empty as we've
- * waited for a sequence higher than any pending execbuffer
- */
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+ if (!dev_priv->mm.wedged) {
+ /* Active and flushing should now be empty as we've
+ * waited for a sequence higher than any pending execbuffer
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.active_list));
+ WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+ /* Request should now be empty as we've also waited
+ * for the last request in the list
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.request_list));
+ }
- /* Request should now be empty as we've also waited
- * for the last request in the list
+ /* Empty the active and flushing lists to inactive. If there's
+ * anything left at this point, it means that we're wedged and
+ * nothing good's going to happen by leaving them there. So strip
+ * the GPU domains and just stuff them onto inactive.
*/
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
+ while (!list_empty(&dev_priv->mm.active_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+ while (!list_empty(&dev_priv->mm.flushing_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
- /* Move all buffers out of the GTT. */
+
+ /* Move all inactive buffers out of the GTT. */
ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
- BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
-
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
#define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \
- I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+ I915_INTERRUPT_ENABLE_VAR)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
}
}
+static inline u32
+i915_pipestat(int pipe)
+{
+ if (pipe == 0)
+ return PIPEASTAT;
+ if (pipe == 1)
+ return PIPEBSTAT;
+ BUG();
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != mask) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] |= mask;
+ /* Enable the interrupt, clear any pending status */
+ I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+ (void) I915_READ(reg);
+ }
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != 0) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] &= ~mask;
+ I915_WRITE(reg, dev_priv->pipestat[pipe]);
+ (void) I915_READ(reg);
+ }
+}
+
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
+ u32 vblank_status;
+ u32 vblank_enable;
int vblank = 0;
+ unsigned long irqflags;
+ int irq_received;
+ int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, ~0);
iir = I915_READ(IIR);
- if (iir == 0) {
- if (dev->pdev->msi_enabled) {
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IMR);
- }
- return IRQ_NONE;
+ if (IS_I965G(dev)) {
+ vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ } else {
+ vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+ for (;;) {
+ irq_received = iir != 0;
+
+ /* Can't rely on pipestat interrupt bit in iir as it might
+ * have been cleared after the pipestat interrupt was received.
+ * It doesn't set the bit in iir again, but it still produces
+ * interrupts (for non-MSI).
+ */
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
- pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ pipeb_stats = I915_READ(PIPEBSTAT);
+ /*
+ * Clear the PIPE(A|B)STAT regs before the IIR
+ */
+ if (pipea_stats & 0x8000ffff) {
+ I915_WRITE(PIPEASTAT, pipea_stats);
+ irq_received = 1;
+ }
+
+ if (pipeb_stats & 0x8000ffff) {
+ I915_WRITE(PIPEBSTAT, pipeb_stats);
+ irq_received = 1;
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+ if (!irq_received)
+ break;
+
+ ret = IRQ_HANDLED;
+
+ I915_WRITE(IIR, iir);
+ new_iir = I915_READ(IIR); /* Flush posted writes */
+
+ if (dev_priv->sarea_priv)
+ dev_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+
+ if (iir & I915_USER_INTERRUPT) {
+ dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
+ if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
- I915_WRITE(PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(PIPEBSTAT);
- /* Ack the event */
- I915_WRITE(PIPEBSTAT, pipeb_stats);
-
- /* The vblank interrupt gets enabled even if we didn't ask for
- it, so make sure it's shut down again */
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
- pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
- if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+ if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+ (iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
- I915_WRITE(PIPEBSTAT, pipeb_stats);
- }
-
- I915_WRITE(IIR, iir);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IIR); /* Flush posted writes */
-
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ /* With MSI, interrupts are only generated when iir
+ * transitions from zero to nonzero. If another bit got
+ * set while we were handling the existing iir bits, then
+ * we would never get another interrupt.
+ *
+ * This is fine on non-MSI as well, as if we hit this path
+ * we avoid exiting the interrupt handler only to generate
+ * another one.
+ *
+ * Note that for MSI this could cause a stray interrupt report
+ * if an interrupt landed in the time between writing IIR and
+ * the posting read. This should be rare enough to never
+ * trigger the 99% of 100,000 interrupts test for disabling
+ * stray interrupts.
+ */
+ iir = new_iir;
}
- if (iir & I915_ASLE_INTERRUPT)
- opregion_asle_intr(dev);
-
- return IRQ_HANDLED;
+ return ret;
}
static int i915_emit_irq(struct drm_device * dev)
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- return 0;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- /* Enabling vblank events in IMR comes before PIPESTAT write, or
- * there's a race where the PIPESTAT vblank bit gets set to 1, so
- * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
- * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
- * IMR masks it. It doesn't ever get set after we clear the masking
- * in IMR because the ISR bit is edge, not level-triggered, on the
- * OR of PIPESTAT bits.
- */
- i915_enable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
- pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
- pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
return 0;
}
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- return;
- break;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
- pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
+ (void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
-
- /* Set initial unmasked IRQs to just the selected vblank pipes. */
- dev_priv->irq_mask_reg = ~0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+ /* Unmask the interrupts that we always want on. */
+ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ /* Disable pipe interrupt enables, clear pending pipe status */
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ /* Clear pending interrupt status */
+ I915_WRITE(IIR, I915_READ(IIR));
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
- temp = I915_READ(PIPEASTAT);
- I915_WRITE(PIPEASTAT, temp);
- temp = I915_READ(PIPEBSTAT);
- I915_WRITE(PIPEBSTAT, temp);
- temp = I915_READ(IIR);
- I915_WRITE(IIR, temp);
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ I915_WRITE(IIR, I915_READ(IIR));
}
struct opregion_asle *asle = dev_priv->opregion.asle;
if (asle) {
- u32 pipeb_stats = I915_READ(PIPEBSTAT);
if (IS_MOBILE(dev)) {
- /* Many devices trigger events with a write to the
- legacy backlight controller, so we need to ensure
- that it's able to generate interrupts */
- I915_WRITE(PIPEBSTAT, pipeb_stats |=
- I915_LEGACY_BLC_EVENT_ENABLE);
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
- } else
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ i915_enable_pipestat(dev_priv, 1,
+ I915_LEGACY_BLC_EVENT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock,
+ irqflags);
+ }
asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
ASLE_PFMB_EN;
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
if (IS_I965G(dev) && IS_MOBILE(dev))
I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
int mga_driver_load(struct drm_device * dev, unsigned long flags)
{
drm_mga_private_t *dev_priv;
+ int ret;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
+ ret = drm_vblank_init(dev, 1);
+
+ if (ret) {
+ (void) mga_driver_unload(dev);
+ return ret;
+ }
+
return 0;
}
int mga_driver_irq_postinstall(struct drm_device *dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
+ .load = r128_driver_load,
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
.get_vblank_counter = r128_get_vblank_counter,
.patchlevel = DRIVER_PATCHLEVEL,
};
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+ return drm_vblank_init(dev, 1);
+}
+
static int __init r128_init(void)
{
driver.num_ioctls = r128_max_ioctl;
extern int r128_driver_irq_postinstall(struct drm_device *dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
extern void r128_driver_preclose(struct drm_device * dev,
struct drm_file *file_priv);
int r128_driver_irq_postinstall(struct drm_device *dev)
{
- return drm_vblank_init(dev, 1);
+ return 0;
}
void r128_driver_irq_uninstall(struct drm_device * dev)
if (ret != 0)
return ret;
+ ret = drm_vblank_init(dev, 2);
+ if (ret) {
+ radeon_driver_unload(dev);
+ return ret;
+ }
+
DRM_DEBUG("%s card detected\n",
((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
return ret;
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
dev->max_vblank_count = 0x001fffff;
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
if (!dev_priv)
return -EINVAL;
- drm_vblank_init(dev, 1);
status = VIA_READ(VIA_REG_INTERRUPT);
VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
| dev_priv->irq_enable_mask);
ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
if (ret) {
drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+ return ret;
}
- return ret;
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ drm_sman_takedown(&dev_priv->sman);
+ drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+ return ret;
+ }
+
+ return 0;
}
int via_driver_unload(struct drm_device *dev)
static struct apple_key_translation apple_fn_keys[] = {
{ KEY_BACKSPACE, KEY_DELETE },
+ { KEY_ENTER, KEY_INSERT },
{ KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
{ KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY },
- { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */
- { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */
+ { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY },
+ { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY },
{ KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY },
{ KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY },
{ KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
.driver_data = APPLE_HAS_FN },
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
- { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
- { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) },
{ HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
goto err_bus;
#ifdef CONFIG_HID_COMPAT
- hid_compat_wq = create_workqueue("hid_compat");
+ hid_compat_wq = create_singlethread_workqueue("hid_compat");
if (!hid_compat_wq) {
hidraw_exit();
goto err;
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
#define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
+#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
static const struct hid_device_id pl_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR),
.driver_data = 1 }, /* Twin USB Joystick */
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
+ .driver_data = 1 }, /* Twin USB Joystick */
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
{ }
};
static struct cdev hidraw_cdev;
static struct class *hidraw_class;
static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES];
-static DEFINE_SPINLOCK(minors_lock);
+static DEFINE_MUTEX(minors_lock);
static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
struct hidraw_list *list;
int err = 0;
- lock_kernel();
if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) {
err = -ENOMEM;
goto out;
}
- spin_lock(&minors_lock);
+ lock_kernel();
+ mutex_lock(&minors_lock);
if (!hidraw_table[minor]) {
printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n",
minor);
file->private_data = list;
dev = hidraw_table[minor];
- if (!dev->open++)
- dev->hid->ll_driver->open(dev->hid);
+ if (!dev->open++) {
+ err = dev->hid->ll_driver->open(dev->hid);
+ if (err < 0)
+ dev->open--;
+ }
out_unlock:
- spin_unlock(&minors_lock);
-out:
+ mutex_unlock(&minors_lock);
unlock_kernel();
+out:
return err;
}
result = -EINVAL;
- spin_lock(&minors_lock);
+ mutex_lock(&minors_lock);
for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) {
if (hidraw_table[minor])
break;
}
- spin_unlock(&minors_lock);
-
if (result) {
+ mutex_unlock(&minors_lock);
kfree(dev);
goto out;
}
NULL, "%s%d", "hidraw", minor);
if (IS_ERR(dev->dev)) {
- spin_lock(&minors_lock);
hidraw_table[minor] = NULL;
- spin_unlock(&minors_lock);
+ mutex_unlock(&minors_lock);
result = PTR_ERR(dev->dev);
kfree(dev);
goto out;
}
+ mutex_unlock(&minors_lock);
init_waitqueue_head(&dev->wait);
INIT_LIST_HEAD(&dev->list);
hidraw->exist = 0;
- spin_lock(&minors_lock);
+ mutex_lock(&minors_lock);
hidraw_table[hidraw->minor] = NULL;
- spin_unlock(&minors_lock);
+ mutex_unlock(&minors_lock);
device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
unsigned int n, insize = 0;
int ret;
+ clear_bit(HID_DISCONNECTED, &usbhid->iofl);
+
usbhid->bufsize = HID_MIN_BUFFER_SIZE;
hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
- mutex_lock(&usbhid->setup);
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
}
}
- if (!usbhid->urbin) {
- err_hid("couldn't find an input interrupt endpoint");
- ret = -ENODEV;
- goto fail;
- }
-
init_waitqueue_head(&usbhid->wait);
INIT_WORK(&usbhid->reset_work, hid_reset);
setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
hid_dump_device(hid);
set_bit(HID_STARTED, &usbhid->iofl);
- mutex_unlock(&usbhid->setup);
return 0;
usb_free_urb(usbhid->urbin);
usb_free_urb(usbhid->urbout);
usb_free_urb(usbhid->urbctrl);
+ usbhid->urbin = NULL;
+ usbhid->urbout = NULL;
+ usbhid->urbctrl = NULL;
hid_free_buffers(dev, hid);
- mutex_unlock(&usbhid->setup);
return ret;
}
if (WARN_ON(!usbhid))
return;
- mutex_lock(&usbhid->setup);
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
usb_free_urb(usbhid->urbin);
usb_free_urb(usbhid->urbctrl);
usb_free_urb(usbhid->urbout);
+ usbhid->urbin = NULL; /* don't mess up next start */
+ usbhid->urbctrl = NULL;
+ usbhid->urbout = NULL;
hid_free_buffers(hid_to_usb_dev(hid), hid);
- mutex_unlock(&usbhid->setup);
}
static struct hid_ll_driver usb_hid_driver = {
static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_device *dev = interface_to_usbdev(intf);
struct usbhid_device *usbhid;
struct hid_device *hid;
+ unsigned int n, has_in = 0;
size_t len;
int ret;
dbg_hid("HID probe called for ifnum %d\n",
intf->altsetting->desc.bInterfaceNumber);
+ for (n = 0; n < interface->desc.bNumEndpoints; n++)
+ if (usb_endpoint_is_int_in(&interface->endpoint[n].desc))
+ has_in++;
+ if (!has_in) {
+ dev_err(&intf->dev, "couldn't find an input interrupt "
+ "endpoint\n");
+ return -ENODEV;
+ }
+
hid = hid_allocate_device();
if (IS_ERR(hid))
return PTR_ERR(hid);
hid->driver_data = usbhid;
usbhid->hid = hid;
- mutex_init(&usbhid->setup); /* needed on suspend/resume */
ret = hid_add_device(hid);
if (ret) {
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
struct usbhid_device *usbhid = hid->driver_data;
int status;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid->retry_delay = 0;
status = hid_start_in(hid);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
- struct mutex setup;
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
/* Set 13: iMac 8,1 */
{ "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
"TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL },
+/* Set 14: iMac 6,1 */
+ { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
+ "TO0P", "Tp0P", NULL },
};
/* List of keys used to read/write fan speeds */
{ .accelerometer = 1, .light = 1, .temperature_set = 12 },
/* iMac 8: light sensor only, temperature set 13 */
{ .accelerometer = 0, .light = 0, .temperature_set = 13 },
+/* iMac 6: light sensor only, temperature set 14 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 14 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple MacPro", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
+ &applesmc_dmi_data[4]},
{ applesmc_dmi_match, "Apple iMac 8", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
&applesmc_dmi_data[13]},
+ { applesmc_dmi_match, "Apple iMac 6", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") },
+ &applesmc_dmi_data[14]},
{ applesmc_dmi_match, "Apple iMac 5", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") },
MODULE_AUTHOR("Nicolas Boichat");
MODULE_DESCRIPTION("Apple SMC");
MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(dmi, applesmc_whitelist);
if (adapter_parm[type].init.val)
line_set(port, 1, &adapter_parm[type].init);
- parport_release(adapter->pdev);
-
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
goto ERROR1;
return;
ERROR1:
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
ERROR0:
kfree(adapter);
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
+
#include <mach/usb.h>
+#include <mach/mux.h>
#ifndef DEBUG
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_MACH_OMAP_H2
-
/* board-specific PM hooks */
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
}
+#endif
+
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
#endif
/*-------------------------------------------------------------------------*/
* NOTE: guaranteeing certain response times might mean we shouldn't
* share keventd's work queue; a realtime task might be safest.
*/
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
{
int status;
otg_ctrl &= ~OTG_XCEIV_INPUTS;
otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
static int otg_remove(struct platform_device *dev)
{
- otg_dev = 0;
+ otg_dev = NULL;
return 0;
}
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
.probe = otg_probe,
.remove = otg_remove,
.driver = {
isp = dev_get_drvdata(dev);
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
otg_unbind(isp);
#endif
if (machine_is_omap_h2())
- omap_free_gpio(2);
+ gpio_free(2);
isp->timer.data = 0;
set_bit(WORK_STOP, &isp->todo);
flush_scheduled_work();
put_device(&i2c->dev);
- the_transceiver = 0;
+ the_transceiver = NULL;
return 0;
}
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = 0;
+ isp->otg.host = NULL;
return 0;
}
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
u32 l;
+#endif
if (!otg || isp != the_transceiver)
return -ENODEV;
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = 0;
+ isp->otg.gadget = NULL;
power_down(isp);
return 0;
}
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
- if (machine_is_omap_h2())
+ if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
/*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(0);
+ otg_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
- list_for_each_entry_safe(client, _n, &adap->clients, list) {
+ list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
driver = client->driver;
hw->chipset = ide_acorn;
}
-static int __init
+static int __devinit
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
.swdma_mask = ATA_SWDMA2,
};
-static int __init
+static int __devinit
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+ PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, ide_ids);
static DEFINE_RWLOCK(addr_space_lock);
-/* addr_space list will have zero and max already included as bounds */
-static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL };
-static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr;
-
static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl,
struct hpsb_host *host)
return retval;
}
+static struct hpsb_address_ops dummy_ops;
+
+/* dummy address spaces as lower and upper bounds of the host's a.s. list */
static void init_hpsb_highlevel(struct hpsb_host *host)
{
- INIT_LIST_HEAD(&dummy_zero_addr.host_list);
- INIT_LIST_HEAD(&dummy_zero_addr.hl_list);
- INIT_LIST_HEAD(&dummy_max_addr.host_list);
- INIT_LIST_HEAD(&dummy_max_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.hl_list);
- dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops;
+ host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops;
- dummy_zero_addr.start = dummy_zero_addr.end = 0;
- dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48;
+ host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0;
+ host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48;
- list_add_tail(&dummy_zero_addr.host_list, &host->addr_space);
- list_add_tail(&dummy_max_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space);
}
void highlevel_add_host(struct hpsb_host *host)
#include "ieee1394_types.h"
#include "csr.h"
+#include "highlevel.h"
struct hpsb_packet;
struct hpsb_iso;
struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
struct csr_control csr;
+
+ struct hpsb_address_serve dummy_zero_addr;
+ struct hpsb_address_serve dummy_max_addr;
};
enum devctl_cmd {
.model_id = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod mini */ {
.firmware_revision = 0x0a2700,
.model_id = 0x000023,
return;
read_lock_irqsave(&sbp2_hi_logical_units_lock, flags);
+
list_for_each_entry(lu, &hi->logical_units, lu_list)
- if (likely(atomic_read(&lu->state) !=
- SBP2LU_STATE_IN_SHUTDOWN)) {
- atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
+ if (atomic_cmpxchg(&lu->state,
+ SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET)
+ == SBP2LU_STATE_RUNNING)
scsi_block_requests(lu->shost);
- }
+
read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags);
}
/* struct for tracking if cqes have been reported to the application */
struct ehca_qmap_entry {
u16 app_wr_id;
- u16 reported;
+ u8 reported;
+ u8 cqe_req;
};
struct ehca_queue_map {
unsigned int entries;
unsigned int tail;
unsigned int left_to_poll;
+ unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */
};
struct ehca_qp {
if (printk_timed_ratelimit(&ehca_dmem_warn_time,
30 * 1000))
ehca_gen_err("DMEM operations are not allowed"
- "as long as an ehca adapter is"
- "attached to the LPAR");
+ "in conjunction with eHCA");
return NOTIFY_BAD;
}
}
{
int i;
- qmap->tail = 0;
- for (i = 0; i < qmap->entries; i++)
+ qmap->tail = qmap->entries - 1;
+ qmap->left_to_poll = 0;
+ qmap->next_wqe_idx = 0;
+ for (i = 0; i < qmap->entries; i++) {
qmap->map[i].reported = 1;
+ qmap->map[i].cqe_req = 0;
+ }
}
/*
void *wqe_v;
u64 q_ofs;
u32 wqe_idx;
+ unsigned int tail_idx;
/* convert real to abs address */
wqe_p = wqe_p & (~(1UL << 63));
return -EFAULT;
}
+ tail_idx = (qmap->tail + 1) % qmap->entries;
wqe_idx = q_ofs / ipz_queue->qe_size;
- if (wqe_idx < qmap->tail)
- qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx;
- else
- qmap->left_to_poll = wqe_idx - qmap->tail;
+ /* check all processed wqes, whether a cqe is requested or not */
+ while (tail_idx != wqe_idx) {
+ if (qmap->map[tail_idx].cqe_req)
+ qmap->left_to_poll++;
+ tail_idx = (tail_idx + 1) % qmap->entries;
+ }
+ /* save index in queue, where we have to start flushing */
+ qmap->next_wqe_idx = wqe_idx;
return 0;
}
} else {
spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
my_qp->sq_map.left_to_poll = 0;
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
my_qp->rq_map.left_to_poll = 0;
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
}
qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 0;
switch (send_wr->opcode) {
case IB_WR_SEND:
if ((send_wr->send_flags & IB_SEND_SIGNALED ||
qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR)
- && !hidden)
+ && !hidden) {
wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM;
+ qmap_entry->cqe_req = 1;
+ }
if (send_wr->opcode == IB_WR_SEND_WITH_IMM ||
send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
qmap_entry = &my_qp->rq_map.map[rq_map_idx];
qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 1;
wqe_cnt++;
} /* eof for cur_recv_wr */
goto repoll;
wc->qp = &my_qp->ib_qp;
+ qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
+ if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
+ /* We got a send completion. */
+ qmap = &my_qp->sq_map;
+ else
+ /* We got a receive completion. */
+ qmap = &my_qp->rq_map;
+
+ /* advance the tail pointer */
+ qmap->tail = qmap_tail_idx;
+
if (is_error) {
/*
* set left_to_poll to 0 because in error state, we will not
* get any additional CQEs
*/
- ehca_add_to_err_list(my_qp, 1);
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
my_qp->sq_map.left_to_poll = 0;
+ ehca_add_to_err_list(my_qp, 1);
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
+ my_qp->rq_map.left_to_poll = 0;
if (HAS_RQ(my_qp))
ehca_add_to_err_list(my_qp, 0);
- my_qp->rq_map.left_to_poll = 0;
}
- qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
- if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
- /* We got a send completion. */
- qmap = &my_qp->sq_map;
- else
- /* We got a receive completion. */
- qmap = &my_qp->rq_map;
-
qmap_entry = &qmap->map[qmap_tail_idx];
if (qmap_entry->reported) {
ehca_warn(cq->device, "Double cqe on qp_num=%#x",
wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id);
qmap_entry->reported = 1;
- /* this is a proper completion, we need to advance the tail pointer */
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
-
/* if left_to_poll is decremented to 0, add the QP to the error list */
if (qmap->left_to_poll > 0) {
qmap->left_to_poll--;
else
qmap = &my_qp->rq_map;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
while ((nr < num_entries) && (qmap_entry->reported == 0)) {
/* generate flush CQE */
+
memset(wc, 0, sizeof(*wc));
- offset = qmap->tail * ipz_queue->qe_size;
+ offset = qmap->next_wqe_idx * ipz_queue->qe_size;
wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
if (!wqe) {
ehca_err(cq->device, "Invalid wqe offset=%#lx on "
wc->qp = &my_qp->ib_qp;
- /* mark as reported and advance tail pointer */
+ /* mark as reported and advance next_wqe pointer */
qmap_entry->reported = 1;
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap->next_wqe_idx++;
+ if (qmap->next_wqe_idx == qmap->entries)
+ qmap->next_wqe_idx = 0;
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
wc++; nr++;
}
{
struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
struct mlx4_ib_cq *cq = to_mcq(ibcq);
+ struct mlx4_mtt mtt;
int outst_cqe;
int err;
goto out;
}
+ mtt = cq->buf.mtt;
+
err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
if (err)
goto err_buf;
+ mlx4_mtt_cleanup(dev->dev, &mtt);
if (ibcq->uobject) {
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
goto out;
err_buf:
+ mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt);
if (!ibcq->uobject)
mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
cq->resize_buf->cqe);
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
+ unsigned long flags;
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irqrestore(&ml->timer_lock, flags);
return 0;
}
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
- flush_scheduled_work();
+ cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
atkbd->force_release_mask);
}
+/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+ const unsigned int forced_release_keys[] = {
+ 0xae, 0xb0,
+ };
+ int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+ __set_bit(forced_release_keys[i],
+ atkbd->force_release_mask);
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
+ {
+ .ident = "Inventec Symphony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_fixup,
+ .driver_data = atkbd_inventec_keymap_fixup,
+ },
{ }
};
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
}
}
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x11: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x14: return KEY_NUMERIC_3; /* 3 */
+ case 0x21: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x24: return KEY_NUMERIC_6; /* 6 */
+ case 0x41: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x44: return KEY_NUMERIC_9; /* 9 */
+ case 0x84: return KEY_NUMERIC_POUND; /* # */
+ case 0x81: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* left arrow */
+ case 0x88: return KEY_RIGHT; /* right arrow */
+ default: return special_keymap(scancode);
+ }
+}
+
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else if (!strcasecmp(phone, "atcom")) {
+ keymap = keymap_atcom;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
*/
static int hgpk_validate_byte(unsigned char *packet)
{
- return (packet[0] & 0x0C) == 0x08;
+ return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
+ {
+ .ident = "Dell XPS M1530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ .ident = "Compal HEL80I",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
{ }
};
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
- struct wacom_wac * wacom_wac;
+ struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
- struct wacom * wacom;
- struct urb * urb;
+ struct wacom *wacom;
+ struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
#endif
#include "wacom.h"
#include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED 0x00
+#define HID_USAGE_PAGE 0x05
+#define HID_USAGE_PAGE_DIGITIZER 0x0d
+#define HID_USAGE_PAGE_DESKTOP 0x01
+#define HID_USAGE 0x09
+#define HID_USAGE_X 0x30
+#define HID_USAGE_Y 0x31
+#define HID_USAGE_X_TILT 0x3d
+#define HID_USAGE_Y_TILT 0x3e
+#define HID_USAGE_FINGER 0x22
+#define HID_USAGE_STYLUS 0x20
+#define HID_COLLECTION 0xc0
+
+enum {
+ WCM_UNDEFINED = 0,
+ WCM_DESKTOP,
+ WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
- return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
- return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
- return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
- return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
- return;
}
static int wacom_open(struct input_dev *dev)
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
- BIT_MASK(BTN_TOOL_RUBBER);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+ struct wacom_wac *wacom_wac)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct wacom_features *features = wacom_wac->features;
+ char limit = 0, result = 0;
+ int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ unsigned char *report;
+
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report)
+ return -ENOMEM;
+
+ /* retrive report descriptors */
+ do {
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ HID_DEVICET_REPORT << 8,
+ intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+ } while (result < 0 && limit++ < 5);
+
+ if (result < 0)
+ goto out;
+
+ for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+ switch (report[i]) {
+ case HID_USAGE_PAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_PAGE_DIGITIZER:
+ usage = WCM_DIGITIZER;
+ i++;
+ break;
+
+ case HID_USAGE_PAGE_DESKTOP:
+ usage = WCM_DESKTOP;
+ i++;
+ break;
+ }
+ break;
+
+ case HID_USAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_X:
+ if (usage == WCM_DESKTOP) {
+ if (finger) {
+ features->touch_x_max =
+ features->touch_y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 6]);
+ i += 7;
+ } else if (pen) {
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ }
+ } else if (usage == WCM_DIGITIZER) {
+ /* max pressure isn't reported
+ features->pressure_max = (unsigned short)
+ (report[i+4] << 8 | report[i + 3]);
+ */
+ features->pressure_max = 255;
+ i += 4;
+ }
+ break;
+
+ case HID_USAGE_Y:
+ if (usage == WCM_DESKTOP)
+ features->y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+
+ case HID_USAGE_FINGER:
+ finger = 1;
+ i++;
+ break;
+
+ case HID_USAGE_STYLUS:
+ pen = 1;
+ i++;
+ break;
+
+ case HID_USAGE_UNDEFINED:
+ if (usage == WCM_DESKTOP && finger) /* capacity */
+ features->pressure_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+ }
+ break;
+
+ case HID_COLLECTION:
+ /* reset UsagePage ans Finger */
+ finger = usage = 0;
+ break;
+ }
+ }
+
+ result = 0;
+
+ out:
+ kfree(report);
+ return result;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
+ struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
+ struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = get_wacom_feature(id);
- BUG_ON(wacom_wac->features->pktlen > 10);
+ wacom_wac->features = features = get_wacom_feature(id);
+ BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+ if (wacom_wac->features->type == TABLETPC) {
+ if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+ if (usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc)) {
+ printk("wacom: can not retrive extra class descriptor\n");
+ goto fail2;
+ }
+ }
+ error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+ if (error)
+ goto fail2;
+ }
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ if (features->type == TABLETPC) {
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+ }
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
if (error)
goto fail3;
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
+ /*
+ * Ask the tablet to report tablet data if it is not a Tablet PC.
+ * Repeat until it succeeds
+ */
+ if (wacom_wac->features->type != TABLETPC) {
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ }
usb_set_intfdata(intf, wacom);
return 0;
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ usb_buffer_free(interface_to_usbdev(intf), 10,
+ wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
return 1;
}
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ char *data = wacom->data;
+ int prox = 0, pressure;
+ static int stylusInProx, touchInProx = 1, touchOut;
+ struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+ dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+ if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+ if (urb->actual_length == 5) { /* with touch */
+ prox = data[0] & 0x03;
+ } else { /* with capacity */
+ prox = data[1] & 0x03;
+ }
+
+ if (!stylusInProx) { /* stylus not in prox */
+ if (prox) {
+ if (touchInProx) {
+ wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+ wacom->id[0] = TOUCH_DEVICE_ID;
+ if (urb->actual_length != 5) {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_key(wcombo, BTN_TOUCH, 1);
+ }
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ touchOut = 1;
+ return 1;
+ }
+ } else {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (touchOut || !prox) { /* force touch out-prox */
+ wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (data[0] == 2) { /* Penabled */
+ prox = data[1] & 0x20;
+
+ touchInProx = 0;
+
+ wacom->id[0] = ERASER_DEVICE_ID;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (prox) { /* in prox */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[1] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+ /*
+ * was entered with stylus2 pressed
+ * report out proximity for previous tool
+ */
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+
+ /* set new tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ return 0;
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = wacom->features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, pressure);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ stylusInProx = prox;
+ wacom->tool[0] = prox;
+ return 1;
+ }
+ return 0;
+}
+
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
- return (wacom_penpartner_irq(wacom_wac, wcombo));
- break;
+ return wacom_penpartner_irq(wacom_wac, wcombo);
+
case PL:
- return (wacom_pl_irq(wacom_wac, wcombo));
- break;
+ return wacom_pl_irq(wacom_wac, wcombo);
+
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
- return (wacom_graphire_irq(wacom_wac, wcombo));
- break;
+ return wacom_graphire_irq(wacom_wac, wcombo);
+
case PTU:
- return (wacom_ptu_irq(wacom_wac, wcombo));
- break;
+ return wacom_ptu_irq(wacom_wac, wcombo);
+
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
- return (wacom_intuos_irq(wacom_wac, wcombo));
- break;
+ return wacom_intuos_irq(wacom_wac, wcombo);
+
+ case TABLETPC:
+ return wacom_tpc_irq(wacom_wac, wcombo);
+
default:
return 0;
}
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
+ /* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
+ case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
- break;
+ /* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
+ { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
+ { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
-const struct usb_device_id * get_device_table(void) {
- const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+ const struct usb_device_id *id_table = wacom_ids;
+
return id_table;
}
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
+
return wf;
}
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
CINTIQ,
WACOM_BEE,
WACOM_MO,
+ TABLETPC,
MAX_TYPE
};
int pressure_max;
int distance_max;
int type;
+ int touch_x_max;
+ int touch_y_max;
};
struct wacom_wac {
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: %x02x, controller: 0x%02x\n",
+ "features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
{ "" }
};
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
.name = "vkbd",
.owner = THIS_MODULE,
.ids = xenkbd_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenkbd);
+ return xenbus_register_frontend(&xenkbd_driver);
}
static void __exit xenkbd_cleanup(void)
{
- xenbus_unregister_driver(&xenkbd);
+ xenbus_unregister_driver(&xenkbd_driver);
}
module_init(xenkbd_init);
memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
}
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
{
int foundcards = 0;
int i = 0;
printk(KERN_INFO "HiSax module removed\n");
}
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
{
u_char ids[16];
int ret = -1;
}
EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
EXPORT_SYMBOL(HiSax_closecard);
#include "hisax_if.h"
static void hisax_bh(struct work_struct *work);
static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+ return 2;
+}
+
int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
char *name, int protocol)
{
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner,
+ hisax_setup_card_dynamic);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
/* slarp reply, send own ip/netmask; if values are nonsense remote
* should think we are unable to provide it with an address via SLARP */
p += put_u32(p, CISCO_SLARP_REPLY);
- p += put_u32(p, addr); // address
- p += put_u32(p, mask); // netmask
+ *(__be32 *)p = addr; // address
+ p += 4;
+ *(__be32 *)p = mask; // netmask
+ p += 4;
p += put_u16(p, 0); // unused
isdn_net_write_super(lp, skb);
cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
}
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
{
pr_debug("rackmeter: setting up i2s..\n");
rackmeter_setup_i2s(rm);
{ }
};
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
.name = "rackmeter",
.owner = THIS_MODULE,
.match_table = rackmeter_match,
.probe = rackmeter_probe,
- .remove = rackmeter_remove,
+ .remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
};
{
pr_debug("rackmeter_init()\n");
- return macio_register_driver(&rackmeter_drv);
+ return macio_register_driver(&rackmeter_driver);
}
static void __exit rackmeter_exit(void)
{
pr_debug("rackmeter_exit()\n");
- macio_unregister_driver(&rackmeter_drv);
+ macio_unregister_driver(&rackmeter_driver);
}
module_init(rackmeter_init);
pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr);
}
-static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
{
outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK));
outb(1, dm_io_mem(DM1105_CR));
if (fe->ops.set_voltage)
fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
if (fe->ops.tuner_ops.sleep) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.sleep(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
int is_legacy_delivery_system(fe_delivery_system_t s)
{
if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) ||
- (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS))
+ (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) ||
+ (s == SYS_ATSC))
return 1;
return 0;
goto error;
}
- /* firmware is running, reconnect device in the usb bus */
- req.cmd = RECONNECT_USB;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- err("reconnect failed: %d", ret);
-
error:
return ret;
}
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
#define REQUEST_I2C_READ 0x2
#define REQUEST_I2C_WRITE 0x3
-#define REQUEST_POLL_RC 0x4
+#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */
#define REQUEST_JUMPRAM 0x8
#define REQUEST_SET_CLOCK 0xB
#define REQUEST_SET_GPIO 0xC
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
+ u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
};
+extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype);
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype)
+{
+ u8 b[16];
+ int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ REQUEST_GET_VERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+ *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+ *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7];
+ *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+ return ret;
+}
+
/* expecting rx buffer: request data[0] data[1] ... data[2] */
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
{
}
};
+
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 2
+#define RC_REPEAT_DELAY_V1_20 5
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+ int *state)
{
u8 key[4];
int i;
return 0;
}
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u8 system_msb;
+ u8 system_lsb;
+ u8 data;
+ u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+ int *state)
+{
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ struct dib0700_state *st = d->priv;
+ struct dib0700_rc_response poll_reply;
+ u8 buf[6];
+ int i;
+ int status;
+ int actlen;
+ int found = 0;
+
+ /* Set initial results in case we exit the function early */
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ /* Firmware v1.20 provides RC data via bulk endpoint 1 */
+ status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+ sizeof(buf), &actlen, 50);
+ if (status < 0) {
+ /* No data available (meaning no key press) */
+ return 0;
+ }
+
+ if (actlen != sizeof(buf)) {
+ /* We didn't get back the 6 byte message we expected */
+ err("Unexpected RC response size [%d]", actlen);
+ return -1;
+ }
+
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system_msb = buf[2];
+ poll_reply.system_lsb = buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /*
+ info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ */
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ return -1;
+ }
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == poll_reply.system_lsb &&
+ keymap[i].data == poll_reply.data) {
+ *event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ return 0;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ *event = d->last_event;
+ *state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ struct dib0700_state *st = d->priv;
+
+ /* Because some people may have improperly named firmware files,
+ let's figure out whether to use the new firmware call or the legacy
+ call based on the firmware version embedded in the file */
+ if (st->rc_func_version == 0) {
+ u32 hwver, romver, ramver, fwtype;
+ int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+ &fwtype);
+ if (ret < 0) {
+ err("Could not determine version info");
+ return -1;
+ }
+ if (ramver < 0x10200)
+ st->rc_func_version = 1;
+ else
+ st->rc_func_version = 2;
+ }
+
+ if (st->rc_func_version == 2)
+ return dib0700_rc_query_v1_20(d, event, state);
+ else
+ return dib0700_rc_query_legacy(d, event, state);
+}
+
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
/* Key codes for the tiny Pinnacle remote*/
{ 0x07, 0x00, KEY_MUTE },
static int usb_bulk_urb_init(struct usb_data_stream *stream)
{
- int i;
+ int i, j;
if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
stream->props.u.bulk.buffersize)) < 0)
/* allocate the URBs */
for (i = 0; i < stream->props.count; i++) {
- if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL)
+ stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!.\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
-
+ }
usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
usb_rcvbulkpipe(stream->udev,stream->props.endpoint),
stream->buf_list[i],
for (i = 0; i < stream->props.count; i++) {
struct urb *urb;
int frame_offset = 0;
- if ((stream->urb_list[i] =
- usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL)
+
+ stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
+ }
urb = stream->urb_list[i];
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
- .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
+ .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
},
};
ISO_BUF_COUNT,
&ttusb->iso_dma_handle);
+ if (!ttusb->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(ttusb->iso_buffer, 0,
ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT);
ttusb_setup_interfaces(ttusb);
- ttusb_alloc_iso_urbs(ttusb);
+ result = ttusb_alloc_iso_urbs(ttusb);
+ if (result < 0) {
+ dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__);
+ mutex_unlock(&ttusb->semi2c);
+ kfree(ttusb);
+ return result;
+ }
+
if (ttusb_init_controller(ttusb))
printk("ttusb_init_controller: error\n");
ISO_BUF_COUNT),
&dec->iso_dma_handle);
+ if (!dec->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(dec->iso_buffer, 0,
ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT));
dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
GFP_ATOMIC, &dec->irq_dma_handle);
if(!dec->irq_buffer) {
+ usb_free_urb(dec->irq_urb);
return -ENOMEM;
}
usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe,
dprintk("Stopping isoc\n");
for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
- usb_kill_urb(dev->adev->urb[i]);
+ usb_unlink_urb(dev->adev->urb[i]);
usb_free_urb(dev->adev->urb[i]);
dev->adev->urb[i] = NULL;
}
struct em28xx *dev = urb->context;
int i;
unsigned int oldptr;
- unsigned long flags;
int period_elapsed = 0;
int status;
unsigned char *cp;
if (!length)
continue;
- spin_lock_irqsave(&dev->adev->slock, flags);
-
oldptr = dev->adev->hwptr_done_capture;
+ if (oldptr + length >= runtime->buffer_size) {
+ unsigned int cnt =
+ runtime->buffer_size - oldptr;
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ cnt * stride);
+ memcpy(runtime->dma_area, cp + cnt * stride,
+ length * stride - cnt * stride);
+ } else {
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ length * stride);
+ }
+
+ snd_pcm_stream_lock(substream);
+
dev->adev->hwptr_done_capture += length;
if (dev->adev->hwptr_done_capture >=
runtime->buffer_size)
period_elapsed = 1;
}
- spin_unlock_irqrestore(&dev->adev->slock, flags);
-
- if (oldptr + length >= runtime->buffer_size) {
- unsigned int cnt =
- runtime->buffer_size - oldptr;
- memcpy(runtime->dma_area + oldptr * stride, cp,
- cnt * stride);
- memcpy(runtime->dma_area, cp + cnt * stride,
- length * stride - cnt * stride);
- } else {
- memcpy(runtime->dma_area + oldptr * stride, cp,
- length * stride);
- }
+ snd_pcm_stream_unlock(substream);
}
if (period_elapsed)
snd_pcm_period_elapsed(substream);
int ret, byte;
if (dev->state & DEV_DISCONNECTED)
- return(-ENODEV);
+ return -ENODEV;
+
+ if (len > URB_MAX_CTRL_SIZE)
+ return -EINVAL;
em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ if (ret < 0) {
+ if (reg_debug)
+ printk(" failed!\n");
+ mutex_unlock(&dev->ctrl_urb_lock);
+ return ret;
+ }
+
+ if (len)
+ memcpy(buf, dev->urb_buf, len);
+
+ mutex_unlock(&dev->ctrl_urb_lock);
if (reg_debug) {
- printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+ printk("%02x values: ", ret);
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
-
printk("\n");
}
em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, &val, 1, HZ);
-
- if (reg_debug)
- printk(ret < 0 ? " failed!\n" :
- "%02x\n", (unsigned char) val);
+ 0x0000, reg, dev->urb_buf, 1, HZ);
+ val = dev->urb_buf[0];
+ mutex_unlock(&dev->ctrl_urb_lock);
- if (ret < 0)
+ if (ret < 0) {
+ printk(" failed!\n");
return ret;
+ }
+
+ if (reg_debug)
+ printk("%02x\n", (unsigned char) val);
return val;
}
{
int ret;
- /*usb_control_msg seems to expect a kmalloced buffer */
- unsigned char *bufs;
-
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
- if (len < 1)
+ if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
- bufs = kmalloc(len, GFP_KERNEL);
-
em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
if (reg_debug) {
int i;
for (i = 0; i < len; ++i)
printk("\n");
}
- if (!bufs)
- return -ENOMEM;
- memcpy(bufs, buf, len);
+ mutex_lock(&dev->ctrl_urb_lock);
+ memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, bufs, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ mutex_unlock(&dev->ctrl_urb_lock);
+
if (dev->wait_after_write)
msleep(dev->wait_after_write);
- kfree(bufs);
return ret;
}
break;
case EM28XX_AMUX_LINE_IN:
input = EM28XX_AUDIO_SRC_LINE;
+ video = disable;
+ line = enable;
break;
case EM28XX_AMUX_AC97_VIDEO:
input = EM28XX_AUDIO_SRC_LINE;
/* Check if board has eeprom */
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (err < 0) {
- em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n",
- __func__, err);
- return err;
+ em28xx_errdev("board has no eeprom\n");
+ memset(eedata, 0, len);
+ return -ENODEV;
}
buf = 0;
dev->i2c_client.adapter = &dev->i2c_adap;
retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
- if (retval < 0) {
+ if ((retval < 0) && (retval != -ENODEV)) {
em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
+
return retval;
}
if (i2c_scan)
em28xx_do_i2c_scan(dev);
+
return 0;
}
MODULE_LICENSE("GPL");
static LIST_HEAD(em28xx_devlist);
+static DEFINE_MUTEX(em28xx_devlist_mutex);
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
struct em28xx_fh *fh;
enum v4l2_buf_type fh_type = 0;
- lock_kernel();
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(h, &em28xx_devlist, devlist) {
if (h->vdev->minor == minor) {
dev = h;
dev = h;
}
}
- if (NULL == dev) {
- unlock_kernel();
+ mutex_unlock(&em28xx_devlist_mutex);
+ if (NULL == dev)
return -ENODEV;
- }
+
+ mutex_lock(&dev->lock);
em28xx_videodbg("open minor=%d type=%s users=%d\n",
minor, v4l2_type_names[fh_type], dev->users);
fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
if (!fh) {
em28xx_errdev("em28xx-video.c: Out of memory?!\n");
- unlock_kernel();
+ mutex_unlock(&dev->lock);
return -ENOMEM;
}
- mutex_lock(&dev->lock);
fh->dev = dev;
fh->radio = radio;
fh->type = fh_type;
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
- unlock_kernel();
return errCode;
}
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
}
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
if (dev)
ops->fini(dev);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
}
+static int register_analog_devices(struct em28xx *dev)
+{
+ int ret;
+
+ /* allocate and fill video video_device struct */
+ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
+ if (!dev->vdev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+
+ /* register v4l2 video video_device */
+ ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
+ video_nr[dev->devno]);
+ if (ret) {
+ em28xx_errdev("unable to register video device (error=%i).\n",
+ ret);
+ return ret;
+ }
+
+ /* Allocate and fill vbi video_device struct */
+ dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
+
+ /* register v4l2 vbi video_device */
+ ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+ vbi_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("unable to register vbi device\n");
+ return ret;
+ }
+
+ if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
+ dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+ if (!dev->radio_dev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+ ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
+ radio_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("can't register radio device\n");
+ return ret;
+ }
+ em28xx_info("Registered radio device as /dev/radio%d\n",
+ dev->radio_dev->num);
+ }
+
+ em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
+ dev->vdev->num, dev->vbi_dev->num);
+
+ return 0;
+}
+
+
/*
* em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
dev->udev = udev;
mutex_init(&dev->lock);
+ mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
init_waitqueue_head(&dev->open);
init_waitqueue_head(&dev->wait_frame);
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- em28xx_devused &= ~(1<<dev->devno);
- kfree(dev);
return -ENOMEM;
}
return errCode;
}
- list_add_tail(&dev->devlist, &em28xx_devlist);
-
- /* allocate and fill video video_device struct */
- dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
- if (NULL == dev->vdev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
-
- /* register v4l2 video video_device */
- retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
- video_nr[dev->devno]);
- if (retval) {
- em28xx_errdev("unable to register video device (error=%i).\n",
- retval);
- goto fail_unreg;
- }
-
- /* Allocate and fill vbi video_device struct */
- dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
- /* register v4l2 vbi video_device */
- if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
- vbi_nr[dev->devno]) < 0) {
- em28xx_errdev("unable to register vbi device\n");
- retval = -ENODEV;
- goto fail_unreg;
- }
-
- if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
- dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
- if (NULL == dev->radio_dev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
- retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
- radio_nr[dev->devno]);
- if (retval < 0) {
- em28xx_errdev("can't register radio device\n");
- goto fail_unreg;
- }
- em28xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->num);
- }
-
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
INIT_LIST_HEAD(&dev->vidq.queued);
video_mux(dev, 0);
- em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
- dev->vdev->num, dev->vbi_dev->num);
+ mutex_lock(&em28xx_devlist_mutex);
+ list_add_tail(&dev->devlist, &em28xx_devlist);
+ retval = register_analog_devices(dev);
+ if (retval < 0) {
+ em28xx_release_resources(dev);
+ mutex_unlock(&em28xx_devlist_mutex);
+ goto fail_reg_devices;
+ }
mutex_lock(&em28xx_extension_devlist_lock);
if (!list_empty(&em28xx_extension_devlist)) {
}
}
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
-fail_unreg:
- em28xx_release_resources(dev);
+fail_reg_devices:
mutex_unlock(&dev->lock);
- kfree(dev);
return retval;
}
/* allocate device struct */
retval = em28xx_init_dev(&dev, udev, nr);
- if (retval)
+ if (retval) {
+ em28xx_devused &= ~(1<<dev->devno);
+ kfree(dev);
+
return retval;
+ }
em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
#define EM28XX_MIN_BUF 4
#define EM28XX_DEF_BUF 8
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
/* Params for validated field */
#define EM28XX_BOARD_NOT_VALIDATED 1
#define EM28XX_BOARD_VALIDATED 0
/* locks */
struct mutex lock;
+ struct mutex ctrl_urb_lock; /* protects urb_buf */
/* spinlock_t queue_lock; */
struct list_head inqueue, outqueue;
wait_queue_head_t open, wait_frame, wait_stream;
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */
+ char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
+
/* helper funcs that call usb_control_msg */
int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
char *buf, int len);
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
+ if (!gspca_dev->present)
+ return;
reg_w_val(gspca_dev, 0x0000, 0x00);
reg_r(gspca_dev, 0x0002, 1);
reg_w_val(gspca_dev, 0x0053, 0x00);
/* Stop the state machine */
if (dev->state != FPIX_NOP)
wait_for_completion(&dev->can_close);
+}
+
+/* called on streamoff with alt 0 and disconnect */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
usb_free_urb(dev->control_urb);
dev->control_urb = NULL;
error:
/* Free the ressources */
sd_stopN(gspca_dev);
+ sd_stop0(gspca_dev);
return ret;
}
.init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
+ .stop0 = sd_stop0,
};
/* -- device connect -- */
{
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
- if (gspca_dev->present) {
- if (gspca_dev->sd_desc->stopN)
- gspca_dev->sd_desc->stopN(gspca_dev);
- destroy_urbs(gspca_dev);
- gspca_set_alt0(gspca_dev);
- if (gspca_dev->sd_desc->stop0)
- gspca_dev->sd_desc->stop0(gspca_dev);
- PDEBUG(D_STREAM, "stream off OK");
- }
+ if (gspca_dev->present
+ && gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ PDEBUG(D_STREAM, "stream off OK");
}
static void gspca_set_default_mode(struct gspca_dev *gspca_dev)
int ret;
PDEBUG(D_STREAM, "%s open", current->comm);
- gspca_dev = (struct gspca_dev *) video_devdata(file);
+ gspca_dev = video_drvdata(file);
if (mutex_lock_interruptible(&gspca_dev->queue_lock))
return -ERESTARTSYS;
if (!gspca_dev->present) {
ret = -EBUSY;
goto out;
}
+
+ /* protect the subdriver against rmmod */
+ if (!try_module_get(gspca_dev->module)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
gspca_dev->users++;
/* one more user */
#ifdef GSPCA_DEBUG
/* activate the v4l2 debug */
if (gspca_debug & D_V4L2)
- gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG;
else
- gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG);
#endif
ret = 0;
gspca_dev->memory = GSPCA_MEMORY_NO;
}
file->private_data = NULL;
+ module_put(gspca_dev->module);
mutex_unlock(&gspca_dev->queue_lock);
PDEBUG(D_STREAM, "close done");
return ret;
}
-static void dev_release(struct video_device *vfd)
-{
- /* nothing */
-}
-
static struct file_operations dev_fops = {
.owner = THIS_MODULE,
.open = dev_open,
.name = "gspca main driver",
.fops = &dev_fops,
.ioctl_ops = &dev_ioctl_ops,
- .release = dev_release, /* mandatory */
+ .release = video_device_release,
.minor = -1,
};
init_waitqueue_head(&gspca_dev->wq);
/* init video stuff */
- memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
- gspca_dev->vdev.parent = &dev->dev;
- memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
- gspca_dev->vdev.fops = &gspca_dev->fops;
- gspca_dev->fops.owner = module; /* module protection */
+ gspca_dev->vdev = video_device_alloc();
+ memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template);
+ gspca_dev->vdev->parent = &dev->dev;
+ gspca_dev->module = module;
gspca_dev->present = 1;
- ret = video_register_device(&gspca_dev->vdev,
+ video_set_drvdata(gspca_dev->vdev, gspca_dev);
+ ret = video_register_device(gspca_dev->vdev,
VFL_TYPE_GRABBER,
video_nr);
if (ret < 0) {
err("video_register_device err %d", ret);
+ video_device_release(gspca_dev->vdev);
goto out;
}
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
- kref_put(&gspca_dev->kref, gspca_delete);
+ kfree(gspca_dev->usb_buf);
+ kfree(gspca_dev);
return ret;
}
EXPORT_SYMBOL(gspca_dev_probe);
usb_set_intfdata(intf, NULL);
/* We don't want people trying to open up the device */
- video_unregister_device(&gspca_dev->vdev);
+ video_unregister_device(gspca_dev->vdev);
gspca_dev->present = 0;
gspca_dev->streaming = 0;
cam_pkt_op pkt_scan;
/* optional operations */
cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
+ cam_v_op stop0; /* called on stream off & disconnect - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
};
struct gspca_dev {
- struct video_device vdev; /* !! must be the first item */
- struct file_operations fops;
+ struct video_device *vdev;
+ struct module *module; /* subdriver handling the device */
struct usb_device *dev;
struct kref kref;
struct file *capt_file; /* file doing video capture */
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->sensor == SENSOR_PAC7302) {
reg_w(gspca_dev, 0xff, 0x01);
reg_w(gspca_dev, 0x78, 0x40);
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
}
reg_write(gspca_dev->dev, 0x02, 0x00, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
+
/* This maybe reset or power control */
reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
reg_write(gspca_dev->dev, 0x03, 0x01, 0x0);
}
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->chip_revision == Rev012A) {
reg_w_val(gspca_dev->dev, 0x8118, 0x29);
reg_w_val(gspca_dev->dev, 0x8114, 0x08);
reg_w(dev, 0xa0, 0x09, 0xb003);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct usb_device *dev = gspca_dev->dev;
+ if (!gspca_dev->present)
+ return;
reg_w(dev, 0x89, 0xffff, 0xffff);
}
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
send_unknown(gspca_dev->dev, sd->sensor);
}
#define S2255_FW_FAILED 3
#define S2255_FW_DISCONNECTING 4
-#define S2255_FW_MARKER 0x22552f2f
+#define S2255_FW_MARKER cpu_to_le32(0x22552f2f)
/* 2255 read states */
#define S2255_READ_IDLE 0
#define S2255_READ_FRAME 1
{
uint8_t v[3];
- chip->events_mask &= ~events;
+ chip->events_mask |= events;
v[0] = (chip->events_mask & 0xff);
v[1] = (chip->events_mask >> 8) & 0xff;
ret = i2c_master_send(wm8350->i2c_client, ®, 1);
if (ret < 0)
return ret;
- return i2c_master_recv(wm8350->i2c_client, dest, bytes);
+ ret = i2c_master_recv(wm8350->i2c_client, dest, bytes);
+ if (ret < 0)
+ return ret;
+ if (ret != bytes)
+ return -EIO;
+ return 0;
}
static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg,
{
/* we add 1 byte for device register */
u8 msg[(WM8350_MAX_REGISTER << 1) + 1];
+ int ret;
if (bytes > ((WM8350_MAX_REGISTER << 1) + 1))
return -EINVAL;
msg[0] = reg;
memcpy(&msg[1], src, bytes);
- return i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
+ ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
+ if (ret < 0)
+ return ret;
+ if (ret != bytes + 1)
+ return -EIO;
+ return 0;
}
static int wm8350_i2c_probe(struct i2c_client *i2c,
+ifdef CONFIG_SGI_GRU_DEBUG
+ EXTRA_CFLAGS += -DDEBUG
+endif
+
obj-$(CONFIG_SGI_GRU) := gru.o
gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
goto outinput;
}
- if (!acpi_video_backlight_support()) {
- printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&handle))) {
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- if ((level != TP_EC_FAN_AUTO) &&
- (level != TP_EC_FAN_FULLSPEED) &&
+ if (!(level & TP_EC_FAN_AUTO) &&
+ !(level & TP_EC_FAN_FULLSPEED) &&
((level < 0) || (level > 7)))
return -EINVAL;
static void fan_suspend(pm_message_t state)
{
+ int rc;
+
if (!fan_control_allowed)
return;
/* Store fan status in cache */
- fan_get_status_safe(NULL);
+ fan_control_resume_level = 0;
+ rc = fan_get_status_safe(&fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to read fan level for later "
+ "restore during resume: %d\n", rc);
+
+ /* if it is undefined, don't attempt to restore it.
+ * KEEP THIS LAST */
if (tp_features.fan_ctrl_status_undef)
- fan_control_desired_level = TP_EC_FAN_AUTO;
+ fan_control_resume_level = 0;
}
static void fan_resume(void)
{
- u8 saved_fan_level;
u8 current_level = 7;
bool do_set = false;
+ int rc;
/* DSDT *always* updates status on resume */
tp_features.fan_ctrl_status_undef = 0;
- saved_fan_level = fan_control_desired_level;
if (!fan_control_allowed ||
+ !fan_control_resume_level ||
(fan_get_status_safe(¤t_level) < 0))
return;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- do_set = (saved_fan_level > current_level);
+ /* never decrease fan level */
+ do_set = (fan_control_resume_level > current_level);
break;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
- (saved_fan_level == 7 &&
- !(current_level & TP_EC_FAN_FULLSPEED)));
+ /* never decrease fan level, scale is:
+ * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+ *
+ * We expect the firmware to set either 7 or AUTO, but we
+ * handle FULLSPEED out of paranoia.
+ *
+ * So, we can safely only restore FULLSPEED or 7, anything
+ * else could slow the fan. Restoring AUTO is useless, at
+ * best that's exactly what the DSDT already set (it is the
+ * slower it uses).
+ *
+ * Always keep in mind that the DSDT *will* have set the
+ * fans to what the vendor supposes is the best level. We
+ * muck with it only to speed the fan up.
+ */
+ if (fan_control_resume_level != 7 &&
+ !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+ return;
+ else
+ do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+ (current_level != fan_control_resume_level);
break;
default:
return;
if (do_set) {
printk(TPACPI_NOTICE
"restoring fan level to 0x%02x\n",
- saved_fan_level);
- fan_set_level_safe(saved_fan_level);
+ fan_control_resume_level);
+ rc = fan_set_level_safe(fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to restore fan level: %d\n", rc);
}
}
}
/*
- * OK, now the LEB is locked and we can safely start moving iy. Since
+ * OK, now the LEB is locked and we can safely start moving it. Since
* this function utilizes thie @ubi->peb1_buf buffer which is shared
* with some other functions, so lock the buffer by taking the
* @ubi->buf_mutex.
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS)
+ if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
ubi_msg("%s: %d consecutive failures",
ubi->bgt_name, WL_MAX_FAILURES);
ubi_ro_mode(ubi);
- break;
+ ubi->thread_enabled = 0;
+ continue;
}
} else
failures = 0;
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+ depends on PPC_MPC52xx && PPC_BESTCOMM
select CRC32
select PHYLIB
+ select PPC_BESTCOMM_FEC
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
* atl1e_hash_mc_addr
* purpose
* set hash value for a multicast address
- * hash calcu processing :
- * 1. calcu 32bit CRC for multicast address
- * 2. reverse crc with MSB to LSB
*/
u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
{
int i;
crc32 = ether_crc_le(6, mc_addr);
- crc32 = ~crc32;
for (i = 0; i < 32; i++)
value |= (((crc32 >> i) & 1) << (31 - i));
{
struct atl1_adapter *adapter = netdev_priv(netdev);
- wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+ wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
- if (adapter->wol & ATLX_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & ATLX_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & ATLX_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
if (adapter->wol & ATLX_WUFC_MAG)
wol->wolopts |= WAKE_MAGIC;
return;
{
struct atl1_adapter *adapter = netdev_priv(netdev);
- if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+ WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
adapter->wol = 0;
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= ATLX_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= ATLX_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= ATLX_WUFC_BC;
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= ATLX_WUFC_MAG;
return 0;
ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
- err = atl2_request_irq(adapter);
- if (netif_running(netdev) && err)
- return err;
+ if (netif_running(netdev)) {
+ err = atl2_request_irq(adapter);
+ if (err)
+ return err;
+ }
atl2_reset_hw(&adapter->hw);
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.5.23-k4"DRV_EXT
+#define DRV_VERSION "3.5.23-k6"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
#define PFX DRV_NAME ": "
struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
- sizeof(struct rfd), PCI_DMA_TODEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
}
return 0;
/* Need to sync before taking a peek at cb_complete bit */
pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
rfd_status = le16_to_cpu(rfd->status);
DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
/* Get data */
pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
/* If this buffer has the el bit, but we think the receiver
* is still running, check to see if it really stopped while
new_before_last_rfd->command |= cpu_to_le16(cb_el);
pci_dma_sync_single_for_device(nic->pdev,
new_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
/* Now that we have a new stopping point, we can clear the old
* stopping point. We must sync twice to get the proper
old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
pci_dma_sync_single_for_device(nic->pdev,
old_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
pci_dma_sync_single_for_device(nic->pdev,
old_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
}
if(restart_required) {
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
if(rx->skb) {
pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
dev_kfree_skb(rx->skb);
}
}
before_last->command |= cpu_to_le16(cb_el);
before_last->size = 0;
pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_TODEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
nic->rx_to_use = nic->rx_to_clean = nic->rxs;
nic->ru_running = RU_SUSPENDED;
msleep(10);
pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
skb->data, ETH_DATA_LEN))
/* this function will set ->supported = 0 and return 1 if wol is not
* supported by this hardware */
- if (e1000_wol_exclusion(adapter, wol))
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
/* apply any specific unsupported masks here */
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
- if (e1000_wol_exclusion(adapter, wol))
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
switch (hw->device_id) {
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= E1000_WUFC_MAG;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* print bus type/speed/width info */
DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
unsigned long led_status;
unsigned int flags;
+ unsigned int flags2;
struct work_struct downshift_task;
struct work_struct update_phy_task;
};
struct e1000_info {
enum e1000_mac_type mac;
unsigned int flags;
+ unsigned int flags2;
u32 pba;
s32 (*get_variants)(struct e1000_adapter *);
struct e1000_mac_operations *mac_ops;
#define FLAG_RX_RESTART_NOW (1 << 30)
#define FLAG_MSI_TEST_FAILED (1 << 31)
+/* CRC Stripping defines */
+#define FLAG2_CRC_STRIPPING (1 << 0)
+
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
wol->supported = 0;
wol->wolopts = 0;
- if (!(adapter->flags & FLAG_HAS_WOL))
+ if (!(adapter->flags & FLAG_HAS_WOL) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
wol->supported = WAKE_UCAST | WAKE_MCAST |
if (wol->wolopts & WAKE_MAGICSECURE)
return -EOPNOTSUPP;
- if (!(adapter->flags & FLAG_HAS_WOL))
+ if (!(adapter->flags & FLAG_HAS_WOL) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
/* these settings will always override what we currently have */
if (wol->wolopts & WAKE_ARP)
adapter->wol |= E1000_WUFC_ARP;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
goto next_desc;
}
+ /* adjust length to remove Ethernet CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ length -= 4;
+
total_rx_bytes += length;
total_rx_packets++;
pci_dma_sync_single_for_device(pdev, ps_page->dma,
PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ /* remove the CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ l1 -= 4;
+
skb_put(skb, l1);
goto copydone;
} /* if */
skb->truesize += length;
}
+ /* strip the ethernet crc, problem is we're using pages now so
+ * this whole operation can get a little cpu intensive
+ */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ pskb_trim(skb, skb->len - 4);
+
copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
else
rctl |= E1000_RCTL_LPE;
- /* Enable hardware CRC frame stripping */
- rctl |= E1000_RCTL_SECRC;
+ /* Some systems expect that the CRC is included in SMBUS traffic. The
+ * hardware strips the CRC before sending to both SMBUS (BMC) and to
+ * host memory when this is enabled
+ */
+ if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+ rctl |= E1000_RCTL_SECRC;
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
adapter->ei = ei;
adapter->pba = ei->pba;
adapter->flags = ei->flags;
+ adapter->flags2 = ei->flags2;
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* reset the hardware with the new settings */
e1000e_reset(adapter);
err_sw_init:
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
+ e1000e_reset_interrupt_capability(adapter);
err_flashmap:
iounmap(adapter->hw.hw_addr);
err_ioremap:
*/
E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+/*
+ * Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
+ "the CRC");
+
struct e1000_option {
enum { enable_option, range_option, list_option } type;
const char *name;
adapter->flags |= FLAG_SMART_POWER_DOWN;
}
}
+ { /* CRC Stripping */
+ const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "CRC Stripping",
+ .err = "defaulting to enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_CrcStripping > bd) {
+ unsigned int crc_stripping = CrcStripping[bd];
+ e1000_validate_option(&crc_stripping, &opt, adapter);
+ if (crc_stripping == OPTION_ENABLED)
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ }
+ }
{ /* Kumeran Lock Loss Workaround */
const struct e1000_option opt = {
.type = enable_option,
if (bdp->status & TXBD_DEF)
dev->stats.collisions++;
+ /* Unmap the DMA memory */
+ dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+ bdp->length, DMA_TO_DEVICE);
+
/* Free the sk buffer associated with this TxBD */
dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
skb = priv->rx_skbuff[priv->skb_currx];
+ dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+ priv->rx_buffer_size, DMA_FROM_DEVICE);
+
/* We drop the frame if we failed to allocate a new buffer */
if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
bdp->status & RXBD_ERR)) {
if (unlikely(!newskb))
newskb = skb;
- if (skb) {
- dma_unmap_single(&priv->dev->dev,
- bdp->bufPtr,
- priv->rx_buffer_size,
- DMA_FROM_DEVICE);
-
+ if (skb)
dev_kfree_skb_any(skb);
- }
} else {
/* Increment the number of packets */
dev->stats.rx_packets++;
/* this function will set ->supported = 0 and return 1 if wol is not
* supported by this hardware */
- if (igb_wol_exclusion(adapter, wol))
+ if (igb_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
/* apply any specific unsupported masks here */
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
- if (igb_wol_exclusion(adapter, wol))
+ if (igb_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
switch (hw->device_id) {
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= E1000_WUFC_MAG;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
state &= ~PCIE_LINK_STATE_L0S;
pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
state);
- printk(KERN_INFO "Disabling ASPM L0s upstream switch "
- "port %x:%x.%x\n", us_dev->bus->number,
- PCI_SLOT(us_dev->devfn),
- PCI_FUNC(us_dev->devfn));
+ dev_info(&pdev->dev,
+ "Disabling ASPM L0s upstream switch port %s\n",
+ pci_name(us_dev));
}
default:
break;
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* reset the hardware with the new settings */
igb_reset(adapter);
struct ipg_rx *rxfd = sp->rxd + entry;
pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN),
+ le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
dev_kfree_skb_irq(sp->rx_buff[entry]);
sp->rx_buff[entry] = NULL;
*/
if (sp->rx_buff[entry]) {
pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN),
+ le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
dev_kfree_skb_irq(sp->rx_buff[entry]);
if (jumbo->found_start)
dev_kfree_skb_irq(jumbo->skb);
- pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN),
+ pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
skb_put(skb, sp->rxfrag_size);
unsigned int entry = curr % IPG_RFDLIST_LENGTH;
struct ipg_rx *rxfd = sp->rxd + entry;
- if (!(rxfd->rfs & le64_to_cpu(IPG_RFS_RFDDONE)))
+ if (!(rxfd->rfs & cpu_to_le64(IPG_RFS_RFDDONE)))
break;
switch (ipg_nic_rx_check_frame_type(dev)) {
return;
}
-static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter);
+/**
+ * ixgbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
+{
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int i;
+ for (i = 0; i < adapter->num_msix_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * ixgbe_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
+{
+ u32 mask;
+ mask = IXGBE_EIMS_ENABLE_MASK;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+}
/**
* ixgbe_intr - legacy mode Interrupt Handler
}
}
-/**
- * ixgbe_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
-{
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- int i;
- for (i = 0; i < adapter->num_msix_vectors; i++)
- synchronize_irq(adapter->msix_entries[i].vector);
- } else {
- synchronize_irq(adapter->pdev->irq);
- }
-}
-
-/**
- * ixgbe_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
-{
- u32 mask;
- mask = IXGBE_EIMS_ENABLE_MASK;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
- IXGBE_WRITE_FLUSH(&adapter->hw);
-}
-
/**
* ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
*
* Once we know the feature-set enabled for the device, we'll cache
* the register offset the descriptor ring is assigned to.
**/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
{
int feature_mask = 0, rss_i;
int i, txr_idx, rxr_idx;
* number of queues at compile-time. The polling_netdev array is
* intended for Multiqueue, but should work fine with a single queue.
**/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
{
int i;
* Attempt to configure the interrupts using the best available
* capabilities of the hardware and the kernel.
**/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
- *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
{
int err = 0;
int vector, v_budget;
* - Hardware queue count (num_*_queues)
* - defined by miscellaneous hardware support/features (RSS, etc.)
**/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{
int err;
skb_put(skb, framesize);
skb->protocol = eth_type_trans(skb, jme->dev);
- if (jme_rxsum_ok(jme, rxdesc->descwb.flags))
+ if (jme_rxsum_ok(jme, le16_to_cpu(rxdesc->descwb.flags)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
- if (rxdesc->descwb.flags & RXWBFLAG_TAGON) {
+ if (rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_TAGON)) {
if (jme->vlgrp) {
jme->jme_vlan_rx(skb, jme->vlgrp,
- le32_to_cpu(rxdesc->descwb.vlan));
+ le16_to_cpu(rxdesc->descwb.vlan));
NET_STAT(jme).rx_bytes += 4;
}
} else {
jme->jme_rx(skb);
}
- if ((le16_to_cpu(rxdesc->descwb.flags) & RXWBFLAG_DEST) ==
- RXWBFLAG_DEST_MUL)
+ if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_DEST)) ==
+ cpu_to_le16(RXWBFLAG_DEST_MUL))
++(NET_STAT(jme).multicast);
jme->dev->last_rx = jiffies;
rxdesc = rxring->desc;
rxdesc += i;
- if ((rxdesc->descwb.flags & RXWBFLAG_OWN) ||
+ if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
goto out;
}
static int
-jme_tx_tso(struct sk_buff *skb,
- u16 *mss, u8 *flags)
+jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags)
{
- *mss = skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT;
+ *mss = cpu_to_le16(skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT);
if (*mss) {
*flags |= TXFLAG_LSEN;
}
static inline void
-jme_tx_vlan(struct sk_buff *skb, u16 *vlan, u8 *flags)
+jme_tx_vlan(struct sk_buff *skb, __le16 *vlan, u8 *flags)
{
if (vlan_tx_tag_present(skb)) {
*flags |= TXFLAG_TAGON;
- *vlan = vlan_tx_tag_get(skb);
+ *vlan = cpu_to_le16(vlan_tx_tag_get(skb));
}
}
/* Configure port */
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- mdev->profile.tx_pause,
- mdev->profile.tx_ppp,
- mdev->profile.rx_pause,
- mdev->profile.rx_ppp);
+ priv->prof->tx_pause,
+ priv->prof->tx_ppp,
+ priv->prof->rx_pause,
+ priv->prof->rx_ppp);
if (err) {
mlx4_err(mdev, "Failed setting port general configurations"
" for port %d, with error %d\n", priv->port, err);
int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
{
struct mlx4_en_profile *params = &mdev->profile;
+ int i;
params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF);
params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF);
params->rss_xor = (rss_xor != 0);
params->rss_mask = rss_mask & 0x1f;
params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
- params->rx_pause = pprx;
- params->rx_ppp = pfcrx;
- params->tx_pause = pptx;
- params->tx_ppp = pfctx;
- if (params->rx_ppp || params->tx_ppp) {
+ for (i = 1; i <= MLX4_MAX_PORTS; i++) {
+ params->prof[i].rx_pause = pprx;
+ params->prof[i].rx_ppp = pfcrx;
+ params->prof[i].tx_pause = pptx;
+ params->prof[i].tx_ppp = pfctx;
+ }
+ if (pfcrx || pfctx) {
params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
} else {
struct mlx4_en_dev *mdev = priv->mdev;
int err;
- mdev->profile.tx_pause = pause->tx_pause != 0;
- mdev->profile.rx_pause = pause->rx_pause != 0;
+ priv->prof->tx_pause = pause->tx_pause != 0;
+ priv->prof->rx_pause = pause->rx_pause != 0;
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- mdev->profile.tx_pause,
- mdev->profile.tx_ppp,
- mdev->profile.rx_pause,
- mdev->profile.rx_ppp);
+ priv->prof->tx_pause,
+ priv->prof->tx_ppp,
+ priv->prof->rx_pause,
+ priv->prof->rx_ppp);
if (err)
mlx4_err(mdev, "Failed setting pause params to\n");
struct ethtool_pauseparam *pause)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
- struct mlx4_en_dev *mdev = priv->mdev;
- pause->tx_pause = mdev->profile.tx_pause;
- pause->rx_pause = mdev->profile.rx_pause;
+ pause->tx_pause = priv->prof->tx_pause;
+ pause->rx_pause = priv->prof->rx_pause;
}
static void mlx4_en_get_ringparam(struct net_device *dev,
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
int port;
+ __be32 ib_port_default_caps;
err = mlx4_init_uar_table(dev);
if (err) {
}
for (port = 1; port <= dev->caps.num_ports; port++) {
+ ib_port_default_caps = 0;
+ err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
+ if (err)
+ mlx4_warn(dev, "failed to get port %d default "
+ "ib capabilities (%d). Continuing with "
+ "caps = 0\n", port, err);
+ dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps);
#endif /* MLX4_H */
u32 rx_ring_num;
u32 tx_ring_size;
u32 rx_ring_size;
+ u8 rx_pause;
+ u8 rx_ppp;
+ u8 tx_pause;
+ u8 tx_ppp;
};
struct mlx4_en_profile {
int rx_moder_cnt;
int rx_moder_time;
int auto_moder;
- u8 rx_pause;
- u8 rx_ppp;
- u8 tx_pause;
- u8 tx_ppp;
u8 no_reset;
struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1];
};
}
EXPORT_SYMBOL_GPL(mlx4_unregister_vlan);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
+{
+ struct mlx4_cmd_mailbox *inmailbox, *outmailbox;
+ u8 *inbuf, *outbuf;
+ int err;
+
+ inmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inmailbox))
+ return PTR_ERR(inmailbox);
+
+ outmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outmailbox)) {
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ return PTR_ERR(outmailbox);
+ }
+
+ inbuf = inmailbox->buf;
+ outbuf = outmailbox->buf;
+ memset(inbuf, 0, 256);
+ memset(outbuf, 0, 256);
+ inbuf[0] = 1;
+ inbuf[1] = 1;
+ inbuf[2] = 1;
+ inbuf[3] = 1;
+ *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015);
+ *(__be32 *) (&inbuf[20]) = cpu_to_be32(port);
+
+ err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C);
+ if (!err)
+ *caps = *(__be32 *) (outbuf + 84);
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ mlx4_free_cmd_mailbox(dev, outmailbox);
+ return err;
+}
+
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
{
struct mlx4_cmd_mailbox *mailbox;
((u8 *) mailbox->buf)[3] = 6;
((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15);
((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15);
- }
+ } else
+ ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port];
err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT,
MLX4_CMD_TIME_CLASS_B);
if (skb != NULL) {
if (skb_queue_len(&mp->rx_recycle) <
mp->default_rx_ring_size &&
- skb_recycle_check(skb, mp->skb_size))
+ skb_recycle_check(skb, mp->skb_size +
+ dma_get_cache_alignment() - 1))
__skb_queue_head(&mp->rx_recycle, skb);
else
dev_kfree_skb(skb);
struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
if (pd == NULL || pd->shared_smi == NULL) {
- mdiobus_free(msp->smi_bus);
mdiobus_unregister(msp->smi_bus);
+ mdiobus_free(msp->smi_bus);
}
if (msp->err_interrupt != NO_IRQ)
free_irq(msp->err_interrupt, msp);
#define DRV_MODULE_NAME "niu"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "0.9"
-#define DRV_MODULE_RELDATE "May 4, 2008"
+#define DRV_MODULE_VERSION "1.0"
+#define DRV_MODULE_RELDATE "Nov 14, 2008"
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
}
/* Mode is always 10G fiber. */
-static int serdes_init_niu(struct niu *np)
+static int serdes_init_niu_10g_fiber(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
u32 tx_cfg, rx_cfg;
return 0;
}
+static int serdes_init_niu_1g_serdes(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ u16 pll_cfg, pll_sts;
+ int max_retry = 100;
+ u64 sig, mask, val;
+ u32 tx_cfg, rx_cfg;
+ unsigned long i;
+ int err;
+
+ tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV |
+ PLL_TX_CFG_RATE_HALF);
+ rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+ PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+ PLL_RX_CFG_RATE_HALF);
+
+ if (np->port == 0)
+ rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE;
+
+ if (lp->loopback_mode == LOOPBACK_PHY) {
+ u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+ mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+ tx_cfg |= PLL_TX_CFG_ENTEST;
+ rx_cfg |= PLL_RX_CFG_ENTEST;
+ }
+
+ /* Initialize PLL for 1G */
+ pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X);
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_CFG_L, pll_cfg);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_1g_serdes: "
+ "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+ return err;
+ }
+
+ pll_sts = PLL_CFG_ENPLL;
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_STS_L, pll_sts);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_1g_serdes: "
+ "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+ return err;
+ }
+
+ udelay(200);
+
+ /* Initialize all 4 lanes of the SERDES. */
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_tx_cfg(np, i, tx_cfg);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_rx_cfg(np, i, rx_cfg);
+ if (err)
+ return err;
+ }
+
+ switch (np->port) {
+ case 0:
+ val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+ mask = val;
+ break;
+
+ case 1:
+ val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+ mask = val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ while (max_retry--) {
+ sig = nr64(ESR_INT_SIGNALS);
+ if ((sig & mask) == val)
+ break;
+
+ mdelay(500);
+ }
+
+ if ((sig & mask) != val) {
+ dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+ "[%08x]\n", np->port, (int) (sig & mask), (int) val);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int serdes_init_niu_10g_serdes(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ u32 tx_cfg, rx_cfg, pll_cfg, pll_sts;
+ int max_retry = 100;
+ u64 sig, mask, val;
+ unsigned long i;
+ int err;
+
+ tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV);
+ rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+ PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+ PLL_RX_CFG_EQ_LP_ADAPTIVE);
+
+ if (lp->loopback_mode == LOOPBACK_PHY) {
+ u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+ mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+ tx_cfg |= PLL_TX_CFG_ENTEST;
+ rx_cfg |= PLL_RX_CFG_ENTEST;
+ }
+
+ /* Initialize PLL for 10G */
+ pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X);
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_10g_serdes: "
+ "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+ return err;
+ }
+
+ pll_sts = PLL_CFG_ENPLL;
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_10g_serdes: "
+ "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+ return err;
+ }
+
+ udelay(200);
+
+ /* Initialize all 4 lanes of the SERDES. */
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_tx_cfg(np, i, tx_cfg);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_rx_cfg(np, i, rx_cfg);
+ if (err)
+ return err;
+ }
+
+ /* check if serdes is ready */
+
+ switch (np->port) {
+ case 0:
+ mask = ESR_INT_SIGNALS_P0_BITS;
+ val = (ESR_INT_SRDY0_P0 |
+ ESR_INT_DET0_P0 |
+ ESR_INT_XSRDY_P0 |
+ ESR_INT_XDP_P0_CH3 |
+ ESR_INT_XDP_P0_CH2 |
+ ESR_INT_XDP_P0_CH1 |
+ ESR_INT_XDP_P0_CH0);
+ break;
+
+ case 1:
+ mask = ESR_INT_SIGNALS_P1_BITS;
+ val = (ESR_INT_SRDY0_P1 |
+ ESR_INT_DET0_P1 |
+ ESR_INT_XSRDY_P1 |
+ ESR_INT_XDP_P1_CH3 |
+ ESR_INT_XDP_P1_CH2 |
+ ESR_INT_XDP_P1_CH1 |
+ ESR_INT_XDP_P1_CH0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ while (max_retry--) {
+ sig = nr64(ESR_INT_SIGNALS);
+ if ((sig & mask) == val)
+ break;
+
+ mdelay(500);
+ }
+
+ if ((sig & mask) != val) {
+ pr_info(PFX "NIU Port %u signal bits [%08x] are not "
+ "[%08x] for 10G...trying 1G\n",
+ np->port, (int) (sig & mask), (int) val);
+
+ /* 10G failed, try initializing at 1G */
+ err = serdes_init_niu_1g_serdes(np);
+ if (!err) {
+ np->flags &= ~NIU_FLAGS_10G;
+ np->mac_xcvr = MAC_XCVR_PCS;
+ } else {
+ dev_err(np->device, PFX "Port %u 10G/1G SERDES "
+ "Link Failed \n", np->port);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val)
{
int err;
.link_status = link_status_10g_serdes,
};
+static const struct niu_phy_ops phy_ops_10g_serdes_niu = {
+ .serdes_init = serdes_init_niu_10g_serdes,
+ .link_status = link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_serdes_niu = {
+ .serdes_init = serdes_init_niu_1g_serdes,
+ .link_status = link_status_1g_serdes,
+};
+
static const struct niu_phy_ops phy_ops_1g_rgmii = {
.xcvr_init = xcvr_init_1g_rgmii,
.link_status = link_status_1g_rgmii,
};
static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
- .serdes_init = serdes_init_niu,
+ .serdes_init = serdes_init_niu_10g_fiber,
.xcvr_init = xcvr_init_10g,
.link_status = link_status_10g,
};
u32 phy_addr_base;
};
-static const struct niu_phy_template phy_template_niu = {
+static const struct niu_phy_template phy_template_niu_10g_fiber = {
.ops = &phy_ops_10g_fiber_niu,
.phy_addr_base = 16,
};
+static const struct niu_phy_template phy_template_niu_10g_serdes = {
+ .ops = &phy_ops_10g_serdes_niu,
+ .phy_addr_base = 0,
+};
+
+static const struct niu_phy_template phy_template_niu_1g_serdes = {
+ .ops = &phy_ops_1g_serdes_niu,
+ .phy_addr_base = 0,
+};
+
static const struct niu_phy_template phy_template_10g_fiber = {
.ops = &phy_ops_10g_fiber,
.phy_addr_base = 8,
u32 phy_addr_off = 0;
if (plat_type == PLAT_TYPE_NIU) {
- tp = &phy_template_niu;
- phy_addr_off += np->port;
+ switch (np->flags &
+ (NIU_FLAGS_10G |
+ NIU_FLAGS_FIBER |
+ NIU_FLAGS_XCVR_SERDES)) {
+ case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+ /* 10G Serdes */
+ tp = &phy_template_niu_10g_serdes;
+ break;
+ case NIU_FLAGS_XCVR_SERDES:
+ /* 1G Serdes */
+ tp = &phy_template_niu_1g_serdes;
+ break;
+ case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+ /* 10G Fiber */
+ default:
+ tp = &phy_template_niu_10g_fiber;
+ phy_addr_off += np->port;
+ break;
+ }
} else {
switch (np->flags &
(NIU_FLAGS_10G |
np->flags |= NIU_FLAGS_10G;
np->flags &= ~NIU_FLAGS_FIBER;
np->mac_xcvr = MAC_XCVR_XPCS;
+ } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) {
+ /* 10G Serdes or 1G Serdes, default to 10G */
+ np->flags |= NIU_FLAGS_10G;
+ np->flags &= ~NIU_FLAGS_FIBER;
+ np->flags |= NIU_FLAGS_XCVR_SERDES;
+ np->mac_xcvr = MAC_XCVR_XPCS;
} else {
return -EINVAL;
}
u32 val;
int err;
+ num_10g = num_1g = 0;
+
if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
!strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
num_10g = 0;
parent->num_ports = 2;
val = (phy_encode(PORT_TYPE_10G, 0) |
phy_encode(PORT_TYPE_10G, 1));
+ } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) &&
+ (parent->plat_type == PLAT_TYPE_NIU)) {
+ /* this is the Monza case */
+ if (np->flags & NIU_FLAGS_10G) {
+ val = (phy_encode(PORT_TYPE_10G, 0) |
+ phy_encode(PORT_TYPE_10G, 1));
+ } else {
+ val = (phy_encode(PORT_TYPE_1G, 0) |
+ phy_encode(PORT_TYPE_1G, 1));
+ }
} else {
err = fill_phy_probe_info(np, parent, info);
if (err)
dev->name,
(np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
(np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
- (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+ (np->flags & NIU_FLAGS_FIBER ? "FIBER" :
+ (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" :
+ "COPPER")),
(np->mac_xcvr == MAC_XCVR_MII ? "MII" :
(np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
np->vpd.phy_type);
#define PLL_CFG_LD_SHIFT 8
#define PLL_CFG_MPY 0x0000001e
#define PLL_CFG_MPY_SHIFT 1
+#define PLL_CFG_MPY_4X 0x0
+#define PLL_CFG_MPY_5X 0x00000002
+#define PLL_CFG_MPY_6X 0x00000004
+#define PLL_CFG_MPY_8X 0x00000008
+#define PLL_CFG_MPY_10X 0x0000000a
+#define PLL_CFG_MPY_12X 0x0000000c
+#define PLL_CFG_MPY_12P5X 0x0000000e
#define PLL_CFG_ENPLL 0x00000001
#define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002)
#define PLL_TX_CFG_INVPAIR 0x00000080
#define PLL_TX_CFG_RATE 0x00000060
#define PLL_TX_CFG_RATE_SHIFT 5
+#define PLL_TX_CFG_RATE_FULL 0x0
+#define PLL_TX_CFG_RATE_HALF 0x20
+#define PLL_TX_CFG_RATE_QUAD 0x40
#define PLL_TX_CFG_BUSWIDTH 0x0000001c
#define PLL_TX_CFG_BUSWIDTH_SHIFT 2
#define PLL_TX_CFG_ENTEST 0x00000002
#define PLL_RX_CFG_INVPAIR 0x00000080
#define PLL_RX_CFG_RATE 0x00000060
#define PLL_RX_CFG_RATE_SHIFT 5
+#define PLL_RX_CFG_RATE_FULL 0x0
+#define PLL_RX_CFG_RATE_HALF 0x20
+#define PLL_RX_CFG_RATE_QUAD 0x40
#define PLL_RX_CFG_BUSWIDTH 0x0000001c
#define PLL_RX_CFG_BUSWIDTH_SHIFT 2
#define PLL_RX_CFG_ENTEST 0x00000002
return 0;
}
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
return 0;
}
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, 0x16, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1070);
+ if (err < 0)
+ return err;
+
+ /* Change address */
+ err = phy_write(phydev, 0x16, 0x0003);
+ if (err < 0)
+ return err;
+
+ /* Adjust LED Control */
+ err = phy_write(phydev, 0x10, 0x021e);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, 0x16, 0x0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
static int m88e1145_config_init(struct phy_device *phydev)
{
int err;
.config_intr = &marvell_config_intr,
.driver = { .owner = THIS_MODULE },
},
+ {
+ .phy_id = 0x01410e10,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1118",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1118_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ },
{
.phy_id = 0x01410cd0,
.phy_id_mask = 0xfffffff0,
BUG_ON(bus->state != MDIOBUS_REGISTERED);
bus->state = MDIOBUS_UNREGISTERED;
- device_unregister(&bus->dev);
+ device_del(&bus->dev);
for (i = 0; i < PHY_MAX_ADDR; i++) {
if (bus->phy_map[i])
device_unregister(&bus->phy_map[i]->dev);
if (r)
return ERR_PTR(r);
- /* If the phy_id is all Fs, there is no device there */
- if (0xffffffff == phy_id)
+ /* If the phy_id is all Fs or all 0s, there is no device there */
+ if ((0xffff == phy_id) || (0x00 == phy_id))
return NULL;
dev = phy_device_create(bus, addr, phy_id);
*/
int genphy_config_aneg(struct phy_device *phydev)
{
- int result = 0;
+ int result;
- if (AUTONEG_ENABLE == phydev->autoneg) {
- int result = genphy_config_advert(phydev);
+ if (AUTONEG_ENABLE != phydev->autoneg)
+ return genphy_setup_forced(phydev);
+
+ result = genphy_config_advert(phydev);
+
+ if (result < 0) /* error */
+ return result;
- if (result < 0) /* error */
- return result;
+ if (result == 0) {
+ /* Advertisment hasn't changed, but maybe aneg was never on to
+ * begin with? Or maybe phy was isolated? */
+ int ctl = phy_read(phydev, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+ result = 1; /* do restart aneg */
+ }
- /* Only restart aneg if we are advertising something different
- * than we were before. */
- if (result > 0)
- result = genphy_restart_aneg(phydev);
- } else
- result = genphy_setup_forced(phydev);
+ /* Only restart aneg if we are advertising something different
+ * than we were before. */
+ if (result > 0)
+ result = genphy_restart_aneg(phydev);
return result;
}
linkState = LS_UP;
} else {
linkState = LS_DOWN;
- if (netif_msg_link(qdev))
- printk(KERN_WARNING PFX
- "%s: Link is down.\n", qdev->ndev->name);
}
return linkState;
}
ql_mac_enable(qdev, 1);
}
- if (netif_msg_link(qdev))
- printk(KERN_DEBUG PFX
- "%s: Change port_link_state LS_DOWN to LS_UP.\n",
- qdev->ndev->name);
qdev->port_link_state = LS_UP;
netif_start_queue(qdev->ndev);
netif_carrier_on(qdev->ndev);
/* Fall Through */
case LS_DOWN:
- if (netif_msg_link(qdev))
- printk(KERN_DEBUG PFX
- "%s: port_link_state = LS_DOWN.\n",
- qdev->ndev->name);
if (curr_link_state == LS_UP) {
if (netif_msg_link(qdev))
- printk(KERN_DEBUG PFX
- "%s: curr_link_state = LS_UP.\n",
+ printk(KERN_INFO PFX "%s: Link is up.\n",
qdev->ndev->name);
if (ql_is_auto_neg_complete(qdev))
ql_finish_auto_neg(qdev);
if (qdev->port_link_state == LS_UP)
ql_link_down_detect_clear(qdev);
+ qdev->port_link_state = LS_UP;
}
break;
* See if the link is currently down or went down and came
* back up
*/
- if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) {
+ if (curr_link_state == LS_DOWN) {
if (netif_msg_link(qdev))
printk(KERN_INFO PFX "%s: Link is down.\n",
qdev->ndev->name);
qdev->port_link_state = LS_DOWN;
}
+ if (ql_link_down_detect(qdev))
+ qdev->port_link_state = LS_DOWN;
break;
}
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_txdesc *txdesc;
u32 entry;
- int flags;
+ unsigned long flags;
spin_lock_irqsave(&mdp->lock, flags);
if ((mdp->cur_tx - mdp->dirty_tx) >= (TX_RING_SIZE - 4)) {
/* Hook up MII support for ethtool */
mdp->mii_bus->name = "sh_mii";
mdp->mii_bus->parent = &ndev->dev;
- mdp->mii_bus->id[0] = id;
+ snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%x", id);
/* PHY IRQ */
mdp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
* This routine has a simple purpose -- make the SMC chip generate an
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
*/
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int i, retval;
val = SMC_GET_BYTE_TEST(lp);
DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
if (val != 0x87654321) {
- printk(KERN_ERR "Invalid chip endian 0x08%x\n",val);
+ printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
retval = -ENODEV;
goto err_out;
}
* 0 --> there is a device
* anything else, error
*/
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
{
#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
return ret;
}
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc911x_local *lp = netdev_priv(ndev);
static struct platform_driver smc911x_driver = {
.probe = smc911x_drv_probe,
- .remove = smc911x_drv_remove,
+ .remove = __devexit_p(smc911x_drv_remove),
.suspend = smc911x_drv_suspend,
.resume = smc911x_drv_resume,
.driver = {
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
{
void __iomem *ioaddr = lp->base;
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __devexit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) {
base = (u32 __iomem *)&ugeth->ug_regs->tx64;
for (i = 0; i < UEC_HW_STATS_LEN; i++)
- data[j++] = (u64)in_be32(&base[i]);
+ data[j++] = in_be32(&base[i]);
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) {
base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram;
for (i = 0; i < UEC_TX_FW_STATS_LEN; i++)
- data[j++] = (u64)in_be32(&base[i]);
+ data[j++] = base ? in_be32(&base[i]) : 0;
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) {
base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram;
for (i = 0; i < UEC_RX_FW_STATS_LEN; i++)
- data[j++] = (u64)in_be32(&base[i]);
+ data[j++] = base ? in_be32(&base[i]) : 0;
}
}
mode = AX88178_MEDIUM_DEFAULT;
if (ecmd.speed == SPEED_1000)
- mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
+ mode |= AX_MEDIUM_GM;
else if (ecmd.speed == SPEED_100)
mode |= AX_MEDIUM_PS;
else
mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+ mode |= AX_MEDIUM_ENCK;
+
if (ecmd.duplex == DUPLEX_FULL)
mode |= AX_MEDIUM_FD;
else
}
mac_set_cam_mask(regs, vptr->mCAMmask);
- rx_mode = (RCR_AM | RCR_AB);
+ rx_mode = RCR_AM | RCR_AB | RCR_AP;
}
if (dev->mtu > 1500)
rx_mode |= RCR_AL;
rxq->queue[i] = NULL;
- pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
+ pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr,
priv->hw_params.rx_buf_size,
PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
rxb->skb = NULL;
}
- pci_unmap_single(priv->pci_dev, rxb->dma_addr,
- priv->hw_params.rx_buf_size,
+ pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
PCI_DMA_FROMDEVICE);
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
mutex_lock(&priv->mutex);
iwl_alive_start(priv);
mutex_unlock(&priv->mutex);
- ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
}
static void iwl4965_bg_rf_kill(struct work_struct *work)
#define DEFAULT_LONG_RETRY_LIMIT 4U
struct iwl_rx_mem_buffer {
- dma_addr_t dma_addr;
+ dma_addr_t real_dma_addr;
+ dma_addr_t aligned_dma_addr;
struct sk_buff *skb;
struct list_head list;
};
list_del(element);
/* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr);
+ rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr);
rxq->queue[rxq->write] = rxb;
rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
rxq->free_count--;
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
/* Alloc a new receive buffer */
- rxb->skb = alloc_skb(priv->hw_params.rx_buf_size,
+ rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
__GFP_NOWARN | GFP_ATOMIC);
if (!rxb->skb) {
if (net_ratelimit())
list_del(element);
/* Get physical address of RB/SKB */
- rxb->dma_addr =
- pci_map_single(priv->pci_dev, rxb->skb->data,
- priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE);
+ rxb->real_dma_addr = pci_map_single(
+ priv->pci_dev,
+ rxb->skb->data,
+ priv->hw_params.rx_buf_size + 256,
+ PCI_DMA_FROMDEVICE);
+ /* dma address must be no more than 36 bits */
+ BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36));
+ /* and also 256 byte aligned! */
+ rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256);
+ skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr);
+
list_add_tail(&rxb->list, &rxq->rx_free);
rxq->free_count++;
}
for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
- rxq->pool[i].dma_addr,
- priv->hw_params.rx_buf_size,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(rxq->pool[i].skb);
}
* to an SKB, so we need to unmap and free potential storage */
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
- rxq->pool[i].dma_addr,
- priv->hw_params.rx_buf_size,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
PCI_DMA_FROMDEVICE);
priv->alloc_rxb_skb--;
dev_kfree_skb(rxq->pool[i].skb);
mutex_lock(&priv->mutex);
iwl3945_alive_start(priv);
mutex_unlock(&priv->mutex);
- ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
}
static void iwl3945_bg_rf_kill(struct work_struct *work)
/* Fill the receive configuration URB and initialise the Rx call back */
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
- (void *) (skb->tail),
+ skb_tail_pointer(skb),
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp);
cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
return 0;
}
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
.name = "vif",
.owner = THIS_MODULE,
.ids = netfront_ids,
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
- return xenbus_register_frontend(&netfront);
+ return xenbus_register_frontend(&netfront_driver);
}
module_init(netif_init);
if (xen_initial_domain())
return;
- xenbus_unregister_driver(&netfront);
+ xenbus_unregister_driver(&netfront_driver);
}
module_exit(netif_exit);
config PARPORT_PC
tristate "PC-style hardware"
depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
- (!M68K || ISA) && !MN10300 && !AVR32
+ (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
* parallel ports and <S> is the number of serial ports.
*/
card->numports = (dev->subsystem_device & 0xf0) >> 4;
+ if (card->numports > ARRAY_SIZE(card->addr))
+ card->numports = ARRAY_SIZE(card->addr);
return 0;
}
iommu->flush.flush_context = __iommu_flush_context;
iommu->flush.flush_iotlb = __iommu_flush_iotlb;
printk(KERN_INFO "IOMMU 0x%Lx: using Register based "
- "invalidation\n", drhd->reg_base_addr);
+ "invalidation\n",
+ (unsigned long long)drhd->reg_base_addr);
} else {
iommu->flush.flush_context = qi_flush_context;
iommu->flush.flush_iotlb = qi_flush_iotlb;
printk(KERN_INFO "IOMMU 0x%Lx: using Queued "
- "invalidation\n", drhd->reg_base_addr);
+ "invalidation\n",
+ (unsigned long long)drhd->reg_base_addr);
}
}
if (!(cap & PCI_EXP_DEVCAP_FLR))
return -ENOTTY;
- if (!dev->msi_enabled && !dev->msix_enabled)
+ if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
disable_irq(dev->irq);
pci_save_state(dev);
r = pci_execute_reset_function(dev);
pci_restore_state(dev);
- if (!dev->msi_enabled && !dev->msix_enabled)
+ if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
enable_irq(dev->irq);
return r;
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
char *buf;
buf = kmalloc(256, GFP_KERNEL);
- if (buf == NULL)
+ if (buf == NULL) {
dev_printk(KERN_WARNING, &s->dev,
"no memory for verifying CIS\n");
return -ENOMEM;
+ }
list_for_each_entry(cis, &s->cis_cache, node) {
int len = cis->len;
spin_lock_init(&socket->lock);
- if (socket->resource_ops->init) {
- ret = socket->resource_ops->init(socket);
- if (ret)
- return (ret);
- }
-
/* try to obtain a socket number [yes, it gets ugly if we
* register more than 2^sizeof(unsigned int) pcmcia
* sockets... but the socket number is deprecated
/* set proper values in socket->dev */
dev_set_drvdata(&socket->dev, socket);
socket->dev.class = &pcmcia_socket_class;
- snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock);
+ dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock);
/* base address = 0, map = 0 */
socket->cis_mem.flags = 0;
mutex_init(&socket->skt_mutex);
spin_lock_init(&socket->thread_lock);
+ if (socket->resource_ops->init) {
+ ret = socket->resource_ops->init(socket);
+ if (ret)
+ goto err;
+ }
+
tsk = kthread_run(pccardd, socket, "pccardd");
if (IS_ERR(tsk)) {
ret = PTR_ERR(tsk);
{
struct pcmcia_device *p_dev, *tmp_dev;
unsigned long flags;
- int bus_id_len;
s = pcmcia_get_socket(s);
if (!s)
/* by default don't allow DMA */
p_dev->dma_mask = DMA_MASK_NONE;
p_dev->dev.dma_mask = &p_dev->dma_mask;
- bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no);
-
- p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL);
+ dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no);
+ if (!dev_name(&p_dev->dev))
+ goto err_free;
+ p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev));
if (!p_dev->devname)
goto err_free;
- sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id);
ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname);
spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list)
if (p_dev->func == tmp_dev->func) {
p_dev->function_config = tmp_dev->function_config;
+ p_dev->io = tmp_dev->io;
+ p_dev->irq = tmp_dev->irq;
kref_get(&p_dev->function_config->ref);
}
/* We only allow changing Vpp1 and Vpp2 to the same value */
if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
- if (mod->Vpp1 != mod->Vpp2)
+ if (mod->Vpp1 != mod->Vpp2) {
ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n");
return -EINVAL;
+ }
s->socket.Vpp = mod->Vpp1;
if (s->ops->set_socket(s, &s->socket)) {
dev_printk(KERN_WARNING, &s->dev,
======================================================================*/
static struct resource *
-make_resource(resource_size_t b, resource_size_t n, int flags, char *name)
+make_resource(resource_size_t b, resource_size_t n, int flags, const char *name)
{
struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL);
static struct resource *nonstatic_find_io_region(unsigned long base, int num,
unsigned long align, struct pcmcia_socket *s)
{
- struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id);
+ struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev));
struct socket_data *s_data = s->resource_data;
struct pcmcia_align_data data;
unsigned long min = base;
static struct resource * nonstatic_find_mem_region(u_long base, u_long num,
u_long align, int low, struct pcmcia_socket *s)
{
- struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id);
+ struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev));
struct socket_data *s_data = s->resource_data;
struct pcmcia_align_data data;
unsigned long min, max;
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int enum_timeout_flag = 0;
device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
{
int rc = 0;
struct rio_mport *port;
-/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems.
+/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems.
*
* Copyright (C) 2008 David S. Miller <davem@davemloft.net>
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/time.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <asm/hypervisor.h>
-MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
-MODULE_DESCRIPTION("SUN4V RTC driver");
-MODULE_LICENSE("GPL");
-
-struct sun4v_rtc {
- struct rtc_device *rtc;
- spinlock_t lock;
-};
-
static unsigned long hypervisor_get_time(void)
{
unsigned long ret, time;
static int sun4v_read_time(struct device *dev, struct rtc_time *tm)
{
- struct sun4v_rtc *p = dev_get_drvdata(dev);
- unsigned long flags, secs;
-
- spin_lock_irqsave(&p->lock, flags);
- secs = hypervisor_get_time();
- spin_unlock_irqrestore(&p->lock, flags);
-
- rtc_time_to_tm(secs, tm);
-
+ rtc_time_to_tm(hypervisor_get_time(), tm);
return 0;
}
static int sun4v_set_time(struct device *dev, struct rtc_time *tm)
{
- struct sun4v_rtc *p = dev_get_drvdata(dev);
- unsigned long flags, secs;
+ unsigned long secs;
int err;
err = rtc_tm_to_time(tm, &secs);
if (err)
return err;
- spin_lock_irqsave(&p->lock, flags);
- err = hypervisor_set_time(secs);
- spin_unlock_irqrestore(&p->lock, flags);
-
- return err;
+ return hypervisor_set_time(secs);
}
static const struct rtc_class_ops sun4v_rtc_ops = {
.set_time = sun4v_set_time,
};
-static int __devinit sun4v_rtc_probe(struct platform_device *pdev)
+static int __init sun4v_rtc_probe(struct platform_device *pdev)
{
- struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL);
-
- if (!p)
- return -ENOMEM;
-
- spin_lock_init(&p->lock);
-
- p->rtc = rtc_device_register("sun4v", &pdev->dev,
+ struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev,
&sun4v_rtc_ops, THIS_MODULE);
- if (IS_ERR(p->rtc)) {
- int err = PTR_ERR(p->rtc);
- kfree(p);
- return err;
- }
- platform_set_drvdata(pdev, p);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ platform_set_drvdata(pdev, rtc);
return 0;
}
-static int __devexit sun4v_rtc_remove(struct platform_device *pdev)
+static int __exit sun4v_rtc_remove(struct platform_device *pdev)
{
- struct sun4v_rtc *p = platform_get_drvdata(pdev);
-
- rtc_device_unregister(p->rtc);
- kfree(p);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ rtc_device_unregister(rtc);
return 0;
}
.name = "rtc-sun4v",
.owner = THIS_MODULE,
},
- .probe = sun4v_rtc_probe,
- .remove = __devexit_p(sun4v_rtc_remove),
+ .remove = __exit_p(sun4v_rtc_remove),
};
static int __init sun4v_rtc_init(void)
{
- return platform_driver_register(&sun4v_rtc_driver);
+ return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe);
}
static void __exit sun4v_rtc_exit(void)
module_init(sun4v_rtc_init);
module_exit(sun4v_rtc_exit);
+
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_DESCRIPTION("SUN4V RTC driver");
+MODULE_LICENSE("GPL");
advansys_wide_free_mem(boardp);
free_irq(boardp->irq, shost);
err_free_dma:
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA)
free_dma(shost->dma_channel);
+#endif
err_free_proc:
kfree(boardp->prtbuf);
err_unmap:
ASC_DBG(1, "begin\n");
scsi_remove_host(shost);
free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA) {
ASC_DBG(1, "free_dma()\n");
free_dma(shost->dma_channel);
}
+#endif
if (ASC_NARROW_BOARD(board)) {
dma_unmap_single(board->dev,
board->dvc_var.asc_dvc_var.overrun_dma,
.remove = gdth_pci_remove_one,
};
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
{
gdth_ha_str *ha = pci_get_drvdata(pdev);
pci_disable_device(pdev);
}
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ushort vendor = pdev->vendor;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
/* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
ulong flags;
gdt2_dpram_str __iomem *dp2_ptr;
/* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
ushort cdev_cnt, i;
int ok;
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
gdth_ha_str **ha_out)
{
struct Scsi_Host *shp;
static int ulite_request_port(struct uart_port *port)
{
- pr_debug("ulite console: port=%p; port->mapbase=%x\n",
- port, port->mapbase);
+ pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+ port, (unsigned long long) port->mapbase);
if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
dev_err(port->dev, "Memory region busy\n");
dma_rx_addr = t->rx_dma;
/*
- * check if buffers are already dma mapped, map them otherwise
+ * check if buffers are already dma mapped, map them otherwise:
+ * - first map the TX buffer, so cache data gets written to memory
+ * - then map the RX buffer, so that cache entries (with
+ * soon-to-be-stale data) get removed
* use rx buffer in place of tx if tx buffer was not provided
* use temp rx buffer (preallocated or realloc to fit) for rx dma
*/
+ if (t->tx_buf) {
+ if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
+ dma_tx_addr = dma_map_single(hw->dev,
+ (void *)t->tx_buf,
+ t->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(hw->dev, dma_tx_addr))
+ dev_err(hw->dev, "tx dma map error\n");
+ }
+ }
+
if (t->rx_buf) {
if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
dma_rx_addr = dma_map_single(hw->dev,
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_FROM_DEVICE);
}
- if (t->tx_buf) {
- if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
- dma_tx_addr = dma_map_single(hw->dev,
- (void *)t->tx_buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(hw->dev, dma_tx_addr))
- dev_err(hw->dev, "tx dma map error\n");
- }
- } else {
+
+ if (!t->tx_buf) {
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_BIDIRECTIONAL);
hw->tx = hw->rx;
unsigned rfalarm;
unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
unsigned recv_at_once;
+ int last_block = 0;
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
while (rb < t->len) {
if (t->len - rb > MPC52xx_PSC_BUFSIZE) {
rfalarm = MPC52xx_PSC_RFALARM;
+ last_block = 0;
} else {
send_at_once = t->len - sb;
rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb);
+ last_block = 1;
}
dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
for (; send_at_once; sb++, send_at_once--) {
/* set EOF flag before the last word is sent */
- if (send_at_once == 1)
+ if (send_at_once == 1 && last_block)
out_8(&psc->ircr2, 0x01);
if (tx_buf)
} else
drv_data->tx_map_len = drv_data->len;
- /* Stream map the rx buffer */
- drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
- drv_data->rx_map_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, drv_data->rx_dma))
- return 0;
-
- /* Stream map the tx buffer */
+ /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
+ * so we flush the cache *before* invalidating it, in case
+ * the tx and rx buffers overlap.
+ */
drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
- drv_data->tx_map_len,
- DMA_TO_DEVICE);
+ drv_data->tx_map_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, drv_data->tx_dma))
+ return 0;
- if (dma_mapping_error(dev, drv_data->tx_dma)) {
- dma_unmap_single(dev, drv_data->rx_dma,
+ /* Stream map the rx buffer */
+ drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
drv_data->rx_map_len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, drv_data->rx_dma)) {
+ dma_unmap_single(dev, drv_data->tx_dma,
+ drv_data->tx_map_len, DMA_TO_DEVICE);
return 0;
}
if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
return -1;
- /* NULL rx means write-only transfer and no map needed
- since rx DMA will not be used */
- if (drv_data->rx) {
- buf = drv_data->rx;
- drv_data->rx_dma = dma_map_single(
- dev,
- buf,
- drv_data->len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, drv_data->rx_dma))
- return -1;
- drv_data->rx_dma_needs_unmap = 1;
- }
-
if (drv_data->tx == NULL) {
/* Read only message --> use drv_data->dummy_dma_buf for dummy
writes to achive reads */
buf,
drv_data->tx_map_len,
DMA_TO_DEVICE);
- if (dma_mapping_error(dev, drv_data->tx_dma)) {
- if (drv_data->rx_dma) {
- dma_unmap_single(dev,
- drv_data->rx_dma,
- drv_data->len,
- DMA_FROM_DEVICE);
- drv_data->rx_dma_needs_unmap = 0;
- }
+ if (dma_mapping_error(dev, drv_data->tx_dma))
return -1;
- }
drv_data->tx_dma_needs_unmap = 1;
+ /* NULL rx means write-only transfer and no map needed
+ * since rx DMA will not be used */
+ if (drv_data->rx) {
+ buf = drv_data->rx;
+ drv_data->rx_dma = dma_map_single(dev,
+ buf,
+ drv_data->len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, drv_data->rx_dma)) {
+ if (drv_data->tx_dma) {
+ dma_unmap_single(dev,
+ drv_data->tx_dma,
+ drv_data->tx_map_len,
+ DMA_TO_DEVICE);
+ drv_data->tx_dma_needs_unmap = 0;
+ }
+ return -1;
+ }
+ drv_data->rx_dma_needs_unmap = 1;
+ }
+
return 0;
}
struct device *dev = &pdev->dev;
struct spi_imx_master *platform_info;
struct spi_master *master;
- struct driver_data *drv_data = NULL;
+ struct driver_data *drv_data;
struct resource *res;
int irq, status = 0;
goto err_no_pdata;
}
- drv_data->clk = clk_get(&pdev->dev, "perclk2");
- if (IS_ERR(drv_data->clk)) {
- dev_err(&pdev->dev, "probe - cannot get get\n");
- status = PTR_ERR(drv_data->clk);
- goto err_no_clk;
- }
- clk_enable(drv_data->clk);
-
/* Allocate master with space for drv_data */
master = spi_alloc_master(dev, sizeof(struct driver_data));
if (!master) {
drv_data->dummy_dma_buf = SPI_DUMMY_u32;
+ drv_data->clk = clk_get(&pdev->dev, "perclk2");
+ if (IS_ERR(drv_data->clk)) {
+ dev_err(&pdev->dev, "probe - cannot get clock\n");
+ status = PTR_ERR(drv_data->clk);
+ goto err_no_clk;
+ }
+ clk_enable(drv_data->clk);
+
/* Find and map resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
kfree(drv_data->ioarea);
err_no_iores:
- spi_master_put(master);
-
-err_no_pdata:
clk_disable(drv_data->clk);
clk_put(drv_data->clk);
+
err_no_clk:
+ spi_master_put(master);
+
+err_no_pdata:
err_no_mem:
return status;
}
static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
{
- return spi->controller_data;
+ return spi_master_get_devdata(spi->master);
}
static inline void setsck(struct spi_device *dev, int on)
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
sp->bitbang.master->bus_num = info->bus_num;
+ sp->bitbang.master->num_chipselect = info->num_chipselect;
sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
}
mutex_unlock(&device_list_lock);
- if (status != 0)
+ if (status == 0)
+ spi_set_drvdata(spi, spidev);
+ else
kfree(spidev);
return status;
.bDescriptorType = USB_DT_INTERFACE,
/* .bInterfaceNumber = DYNAMIC */
- .bAlternateSetting = 1,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_CDC_DATA,
.bInterfaceSubClass = 0,
__le32 *data = req->buf;
int status;
- if (atomic_inc_return(&rndis->notify_count))
+ if (atomic_inc_return(&rndis->notify_count) != 1)
return;
/* Send RNDIS RESPONSE_AVAILABLE notification; a
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
if (mach->gpio_vbus) {
int value = gpio_get_value(mach->gpio_vbus);
- return mach->gpio_vbus_inverted ? !value : value;
+
+ if (mach->gpio_vbus_inverted)
+ return !value;
+ else
+ return !!value;
}
if (mach->udc_is_connected)
return mach->udc_is_connected();
struct pxa25x_udc *udc;
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- udc->vbus = (is_active != 0);
+ udc->vbus = is_active;
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
return 0;
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa25x_udc *dev = _dev;
- int vbus = gpio_get_value(dev->mach->gpio_vbus);
- if (dev->mach->gpio_vbus_inverted)
- vbus = !vbus;
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
return IRQ_HANDLED;
}
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ struct pci_dev *p_smbus;
+ u8 rev;
u32 temp;
int retval;
pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
}
break;
+ case PCI_VENDOR_ID_ATI:
+ /* SB600 and old version of SB700 have a bug in EHCI controller,
+ * which causes usb devices lose response in some cases.
+ */
+ if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
+ p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ NULL);
+ if (!p_smbus)
+ break;
+ rev = p_smbus->revision;
+ if ((pdev->device == 0x4386) || (rev == 0x3a)
+ || (rev == 0x3b)) {
+ u8 tmp;
+ ehci_info(ehci, "applying AMD SB600/SB700 USB "
+ "freeze workaround\n");
+ pci_read_config_byte(pdev, 0x53, &tmp);
+ pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
+ }
+ pci_dev_put(p_smbus);
+ }
+ break;
}
ehci_reset(ehci);
* the async ring; just the I/O watchdog. Note that if a
* SHRINK were pending, OFF would never be requested.
*/
- enum ehci_timer_action oldactions = ehci->actions;
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
- if (timer_pending(&ehci->watchdog)
- && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
- & oldactions))
- return;
-
switch (action) {
case TIMER_IO_WATCHDOG:
t = EHCI_IO_JIFFIES;
t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
break;
}
- mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
}
if (rp->b_read >= sizeof(struct mon_bin_hdr)) {
- step_len = min(nbytes, (size_t)ep->len_cap);
+ step_len = ep->len_cap;
+ step_len -= rp->b_read - sizeof(struct mon_bin_hdr);
+ if (step_len > nbytes)
+ step_len = nbytes;
offset = rp->b_out + PKT_SIZE;
offset += rp->b_read - sizeof(struct mon_bin_hdr);
if (offset >= rp->b_size)
}
}
/* use bulk reserved ep1 if no other ep is free */
- if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
hw_ep = musb->bulk_ep;
if (is_in)
head = &musb->in_bulk;
err("no more memory");
goto reset_open_count;
}
+ kref_init(&tty->kref);
termios = kzalloc(sizeof(*termios), GFP_KERNEL);
if (!termios) {
retval = -ENOMEM;
static int debug;
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
+#define ONDA_PRODUCT_MT503HS 0x0200
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Patch for Nokia 5310 capacity */
+UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
+ "Nokia",
+ "5310",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
US_FL_MAX_SECTORS_64 ),
/* Reported by Cedric Godin <cedric@belbone.be> */
-UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551,
+UNUSUAL_DEV( 0x0421, 0x04b9, 0x0500, 0x0551,
"Nokia",
"5300",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Richard Nauber <RichardNauber@web.de> */
-UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601,
+UNUSUAL_DEV( 0x0421, 0x04fa, 0x0550, 0x0660,
"Nokia",
"6300",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "GPS",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/*
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
* Reported by Pete Zaitcev <zaitcev@redhat.com>
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
+UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200,
+ "NIKON",
+ "NIKON DSC D2H",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
"NIKON",
bl = backlight_device_register("backlight", &sinfo->pdev->dev,
sinfo, &atmel_lcdc_bl_ops);
- if (IS_ERR(sinfo->backlight)) {
+ if (IS_ERR(bl)) {
dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
PTR_ERR(bl));
return;
const struct fb_image *image,
u32 fg, u32 bg)
{
- unsigned int src_bytes, dwords;
+ unsigned int dwords;
u32 *bits;
radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
+ GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE |
GMC_SRC_DATATYPE_MONO_FG_BG |
ROP3_S |
GMC_BYTE_ORDER_MSB_TO_LSB |
radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
/* Ensure the dst cache is flushed and the engine idle before
* issuing the operation.
*
/* X here pads width to a multiple of 32 and uses the clipper to
* adjust the result. Is that really necessary ? Things seem to
- * work ok for me without that and the doco doesn't seem to imply
+ * work ok for me without that and the doco doesn't seem to imply]
* there is such a restriction.
*/
- OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height);
+ radeon_fifo_wait(rinfo, 4);
+ OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx);
+ OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) |
+ (image->dx + image->width));
+ OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
+
+ OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31));
- src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
- dwords = (src_bytes + 3) / 4;
+ dwords = (image->width + 31) >> 5;
+ dwords *= image->height;
bits = (u32*)(image->data);
while(dwords >= 8) {
info->fbops = &radeonfb_ops;
info->screen_base = rinfo->fb_base;
info->screen_size = rinfo->mapped_vram;
+
/* Fill fix common fields */
strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
info->fix.smem_start = rinfo->fb_base_phys;
info->fix.mmio_len = RADEON_REGSIZE;
info->fix.accel = FB_ACCEL_ATI_RADEON;
+ /* Allocate colormap */
fb_alloc_cmap(&info->cmap, 256, 0);
+ /* Setup pixmap used for acceleration */
+#define PIXMAP_SIZE (2048 * 4)
+
+ info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
+ if (!info->pixmap.addr) {
+ printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n");
+ noaccel = 1;
+ goto bail;
+ }
+ info->pixmap.size = PIXMAP_SIZE;
+ info->pixmap.flags = FB_PIXMAP_SYSTEM;
+ info->pixmap.scan_align = 4;
+ info->pixmap.buf_align = 4;
+ info->pixmap.access_align = 32;
+
+bail:
if (noaccel)
info->flags |= FBINFO_HWACCEL_DISABLED;
default:
dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
pdev->id);
+ kfree(data);
return -EINVAL;
}
data, &da903x_backlight_ops);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
+ kfree(data);
return PTR_ERR(bl);
}
mutex_lock(&ld->ops_lock);
if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
- if (event == FB_EVENT_BLANK)
- ld->ops->set_power(ld, *(int *)evdata->data);
- else
- ld->ops->set_mode(ld, evdata->data);
+ if (event == FB_EVENT_BLANK) {
+ if (ld->ops->set_power)
+ ld->ops->set_power(ld, *(int *)evdata->data);
+ } else {
+ if (ld->ops->set_mode)
+ ld->ops->set_mode(ld, evdata->data);
+ }
}
mutex_unlock(&ld->ops_lock);
return 0;
#ifndef MODULE
static int __init cirrusfb_setup(char *options) {
- char *this_opt, s[32];
- int i;
+ char *this_opt;
DPRINTK("ENTER\n");
if (!fbcon_is_inactive(vc, info)) {
if (ops->blank_state != blank) {
- int ret = 1;
-
ops->blank_state = blank;
fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
ops->cursor_flash = (!blank);
- if (info->fbops->fb_blank)
- ret = info->fbops->fb_blank(blank, info);
- if (ret)
- fbcon_generic_blank(vc, info, blank);
+ if (!(info->flags & FBINFO_MISC_USEREVENT))
+ if (fb_blank(info, blank))
+ fbcon_generic_blank(vc, info, blank);
}
if (!blank)
greenshift = info->var.green.offset;
blueshift = info->var.blue.offset;
- for (i = 32; i < logo->clutsize; i++)
+ for (i = 32; i < 32 + logo->clutsize; i++)
palette[i] = i << redshift | i << greenshift | i << blueshift;
}
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
omapfb-objs := $(objs-yy)
+++ /dev/null
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT 0xfffce000
-#define GPIO_DATA_OUTPUT 0xfffce004
-#define GPIO_DIR_CONTROL 0xfffce008
-#define GPIO_INT_CONTROL 0xfffce00c
-#define GPIO_INT_MASK 0xfffce010
-#define GPIO_INT_STATUS 0xfffce014
-#define GPIO_PIN_CONTROL 0xfffce018
-
-
-#define A_LCD_SSC_RD 3
-#define A_LCD_SSC_SD 7
-#define _A_LCD_RESET 9
-#define _A_LCD_SSC_CS 12
-#define _A_LCD_SSC_A0 13
-
-#define DSP_REG 0xE1017024
-
-const unsigned char INIT_1[12] = {
- 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
- 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
- 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
- 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
- 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
- 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
- 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
- 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
- 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
- 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
- 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
- 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
- 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
- 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
- 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
- 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
- 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
- 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
- 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
- int i, shifter = 0x80;
-
- if (!flag)
- gpio_set_value(_A_LCD_SSC_A0, 0);
- mdelay(2);
- gpio_set_value(A_LCD_SSC_RD, 1);
-
- gpio_set_value(A_LCD_SSC_SD, flag);
-
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- for (i = 0; i < 8; i++) {
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- gpio_set_value(A_LCD_SSC_SD, shifter & byte);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- shifter >>= 1;
- }
- gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
- omap_mcbsp_request(OMAP_MCBSP3);
- omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
- /* new wave */
- gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
- gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
- gpio_request(_A_LCD_RESET, "lcd_reset");
- gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
- gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
- /* set GPIOs to output, with initial data */
- gpio_direction_output(A_LCD_SSC_RD, 1);
- gpio_direction_output(A_LCD_SSC_SD, 0);
- gpio_direction_output(_A_LCD_RESET, 0);
- gpio_direction_output(_A_LCD_SSC_CS, 1);
- gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
- int i;
-
- omap_cfg_reg(MCBSP3_CLKX);
-
- mdelay(2);
- setup_GPIO();
- mdelay(2);
-
- /* reset LCD */
- gpio_set_value(A_LCD_SSC_SD, 1);
- epson_sendbyte(0, 0x25);
-
- gpio_set_value(_A_LCD_RESET, 0);
- mdelay(10);
- gpio_set_value(_A_LCD_RESET, 1);
-
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(2);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD, phase 1 */
- epson_sendbyte(0, 0xCA);
- for (i = 0; i < 10; i++)
- epson_sendbyte(1, INIT_1[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2 */
- epson_sendbyte(0, 0xCB);
- for (i = 0; i < 125; i++)
- epson_sendbyte(1, INIT_2[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2a */
- epson_sendbyte(0, 0xCC);
- for (i = 0; i < 14; i++)
- epson_sendbyte(1, INIT_3[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 3 */
- epson_sendbyte(0, 0xBC);
- epson_sendbyte(1, 0x08);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 4 */
- epson_sendbyte(0, 0x07);
- epson_sendbyte(1, 0x05);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 5 */
- epson_sendbyte(0, 0x94);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 6 */
- epson_sendbyte(0, 0xC6);
- epson_sendbyte(1, 0x80);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100); /* used to be 1000 */
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 7 */
- epson_sendbyte(0, 0x16);
- epson_sendbyte(1, 0x02);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xB1);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 8 */
- epson_sendbyte(0, 0x76);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xDB);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 9 */
- epson_sendbyte(0, 0xAF);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "SX1: LCD panel disable\n");
- sx1_setmmipower(0);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-
- epson_sendbyte(0, 0x25);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0xAE);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0x95);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
- init_system();
- display_init();
-
- sx1_setmmipower(1);
- sx1_setbacklight(0x18);
- sx1_setkeylight (0x06);
- return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel sx1_panel = {
- .name = "sx1",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
- OMAP_LCDC_INV_OUTPUT_EN,
-
- .x_res = 176,
- .y_res = 220,
- .data_lines = 16,
- .bpp = 16,
- .hsw = 5,
- .hfp = 5,
- .hbp = 5,
- .vsw = 2,
- .vfp = 1,
- .vbp = 1,
- .pixel_clock = 1500,
-
- .init = sx1_panel_init,
- .cleanup = sx1_panel_cleanup,
- .enable = sx1_panel_enable,
- .disable = sx1_panel_disable,
- .get_caps = sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&sx1_panel);
- return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
- .probe = sx1_panel_probe,
- .remove = sx1_panel_remove,
- .suspend = sx1_panel_suspend,
- .resume = sx1_panel_resume,
- .driver = {
- .name = "lcd_sx1",
- .owner = THIS_MODULE,
- },
-};
-
-static int sx1_panel_drv_init(void)
-{
- return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
static int pxafb_smart_init(struct pxafb_info *fbi)
{
+ if (!(fbi->lccr0 | LCCR0_LCDT))
+ return 0;
+
fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi,
"lcd_refresh");
if (IS_ERR(fbi->smart_thread)) {
fbi->cmap_inverse = inf->cmap_inverse;
fbi->cmap_static = inf->cmap_static;
- switch (lcd_conn & 0xf) {
+ switch (lcd_conn & LCD_TYPE_MASK) {
case LCD_TYPE_MONO_STN:
fbi->lccr0 = LCCR0_CMS;
break;
unsigned int bbisc = tmio_ioread16(par->lcr + LCR_BBISC);
+ tmio_iowrite16(bbisc, par->lcr + LCR_BBISC);
+
+#ifdef CONFIG_FB_TMIO_ACCELL
/*
* We were in polling mode and now we got correct irq.
* Switch back to IRQ-based sync of command FIFO
par->use_polling = false;
}
- tmio_iowrite16(bbisc, par->lcr + LCR_BBISC);
-
-#ifdef CONFIG_FB_TMIO_ACCELL
if (bbisc & 1)
wake_up(&par->wait_acc);
#endif
static int tmiofb_suspend(struct platform_device *dev, pm_message_t state)
{
struct fb_info *info = platform_get_drvdata(dev);
+#ifdef CONFIG_FB_TMIO_ACCELL
struct tmiofb_par *par = info->par;
+#endif
struct mfd_cell *cell = dev->dev.platform_data;
int retval = 0;
info->fbops->fb_sync(info);
+#ifdef CONFIG_FB_TMIO_ACCELL
/*
* The fb should be usable even if interrupts are disabled (and they are
* during suspend/resume). Switch temporary to forced polling.
*/
printk(KERN_INFO "tmiofb: switching to polling\n");
par->use_polling = true;
+#endif
tmiofb_hw_stop(dev);
if (cell->suspend)
return count;
}
-static void viafb_init_proc(struct proc_dir_entry *viafb_entry)
+static void viafb_init_proc(struct proc_dir_entry **viafb_entry)
{
struct proc_dir_entry *entry;
- viafb_entry = proc_mkdir("viafb", NULL);
+ *viafb_entry = proc_mkdir("viafb", NULL);
if (viafb_entry) {
- entry = create_proc_entry("dvp0", 0, viafb_entry);
+ entry = create_proc_entry("dvp0", 0, *viafb_entry);
if (entry) {
entry->owner = THIS_MODULE;
entry->read_proc = viafb_dvp0_proc_read;
entry->write_proc = viafb_dvp0_proc_write;
}
- entry = create_proc_entry("dvp1", 0, viafb_entry);
+ entry = create_proc_entry("dvp1", 0, *viafb_entry);
if (entry) {
entry->owner = THIS_MODULE;
entry->read_proc = viafb_dvp1_proc_read;
entry->write_proc = viafb_dvp1_proc_write;
}
- entry = create_proc_entry("dfph", 0, viafb_entry);
+ entry = create_proc_entry("dfph", 0, *viafb_entry);
if (entry) {
entry->owner = THIS_MODULE;
entry->read_proc = viafb_dfph_proc_read;
entry->write_proc = viafb_dfph_proc_write;
}
- entry = create_proc_entry("dfpl", 0, viafb_entry);
+ entry = create_proc_entry("dfpl", 0, *viafb_entry);
if (entry) {
entry->owner = THIS_MODULE;
entry->read_proc = viafb_dfpl_proc_read;
if (VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info.
lvds_chip_name || VT1636_LVDS ==
viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) {
- entry = create_proc_entry("vt1636", 0, viafb_entry);
+ entry = create_proc_entry("vt1636", 0, *viafb_entry);
if (entry) {
entry->owner = THIS_MODULE;
entry->read_proc = viafb_vt1636_proc_read;
remove_proc_entry("dfpl", viafb_entry);
remove_proc_entry("vt1636", viafb_entry);
remove_proc_entry("vt1625", viafb_entry);
+ remove_proc_entry("viafb", NULL);
}
static int __devinit via_pci_probe(void)
viafbinfo->node, viafbinfo->fix.id, default_var.xres,
default_var.yres, default_var.bits_per_pixel);
- viafb_init_proc(viaparinfo->proc_entry);
+ viafb_init_proc(&viaparinfo->proc_entry);
viafb_init_dac(IGA2);
return 0;
}
{ "" }
};
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
.name = "vfb",
.owner = THIS_MODULE,
.ids = xenfb_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenfb);
+ return xenbus_register_frontend(&xenfb_driver);
}
static void __exit xenfb_cleanup(void)
{
- xenbus_unregister_driver(&xenfb);
+ xenbus_unregister_driver(&xenfb_driver);
}
module_init(xenfb_init);
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+ dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+ (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+ fbsize);
return 0; /* success */
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && ARM
+ depends on W1 && ARM && HAVE_CLK
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
static u8 omap_w1_read_byte(void *_hdq);
static void omap_w1_write_byte(void *_hdq, u8 byte);
static u8 omap_w1_reset_bus(void *_hdq);
-static void omap_w1_search_bus(void *_hdq, u8 search_type,
- w1_slave_found_callback slave_found);
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
+ u8 search_type, w1_slave_found_callback slave_found);
static struct w1_bus_master omap_w1_master = {
}
/* W1 search callback function */
-static void omap_w1_search_bus(void *_hdq, u8 search_type,
- w1_slave_found_callback slave_found)
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
+ u8 search_type, w1_slave_found_callback slave_found)
{
u64 module_id, rn_le, cs, id;
cs = w1_calc_crc8((u8 *)&rn_le, 7);
id = (cs << 56) | module_id;
- slave_found(_hdq, id);
+ slave_found(master_dev, id);
}
static int _omap_hdq_reset(struct hdq_data *hdq_data)
spin_unlock(&buffer_mapping->private_lock);
}
}
+EXPORT_SYMBOL(invalidate_inode_buffers);
/*
* Remove any clean buffers from the inode's buffer list. This is called
sends, and also let tcp autotune the socket send and receive buffers.
This reduces the number of EAGAIN errors returned by TCP/IP in
high stress workloads (and the number of retries on socket writes
-when sending large SMBWriteX requests).
+when sending large SMBWriteX requests). Fix case in which a portion of
+data can in some cases not get written to the file on the server before the
+file is closed. Fix DFS parsing to properly handle path consumed field,
+and to handle certain codepage conversions better. Fix mount and
+umount race that can cause oops in mount or umount or reconnect.
Version 1.54
------------
#ifdef CONFIG_PROC_FS
static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
{
- struct list_head *tmp;
- struct list_head *tmp1;
+ struct list_head *tmp1, *tmp2, *tmp3;
struct mid_q_entry *mid_entry;
+ struct TCP_Server_Info *server;
struct cifsSesInfo *ses;
struct cifsTconInfo *tcon;
- int i;
+ int i, j;
+ __u32 dev_type;
seq_puts(m,
"Display Internal CIFS Data Structures for Debugging\n"
seq_printf(m, "Servers:");
i = 0;
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalSMBSessionList) {
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp1, &cifs_tcp_ses_list) {
+ server = list_entry(tmp1, struct TCP_Server_Info,
+ tcp_ses_list);
i++;
- ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
- if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) ||
- (ses->serverNOS == NULL)) {
- seq_printf(m, "\nentry for %s not fully "
- "displayed\n\t", ses->serverName);
- } else {
- seq_printf(m,
- "\n%d) Name: %s Domain: %s Mounts: %d OS:"
- " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB"
+ list_for_each(tmp2, &server->smb_ses_list) {
+ ses = list_entry(tmp2, struct cifsSesInfo,
+ smb_ses_list);
+ if ((ses->serverDomain == NULL) ||
+ (ses->serverOS == NULL) ||
+ (ses->serverNOS == NULL)) {
+ seq_printf(m, "\n%d) entry for %s not fully "
+ "displayed\n\t", i, ses->serverName);
+ } else {
+ seq_printf(m,
+ "\n%d) Name: %s Domain: %s Uses: %d OS:"
+ " %s\n\tNOS: %s\tCapability: 0x%x\n\tSMB"
" session status: %d\t",
i, ses->serverName, ses->serverDomain,
- atomic_read(&ses->inUse),
- ses->serverOS, ses->serverNOS,
+ ses->ses_count, ses->serverOS, ses->serverNOS,
ses->capabilities, ses->status);
- }
- if (ses->server) {
+ }
seq_printf(m, "TCP status: %d\n\tLocal Users To "
- "Server: %d SecMode: 0x%x Req On Wire: %d",
- ses->server->tcpStatus,
- atomic_read(&ses->server->socketUseCount),
- ses->server->secMode,
- atomic_read(&ses->server->inFlight));
+ "Server: %d SecMode: 0x%x Req On Wire: %d",
+ server->tcpStatus, server->srv_count,
+ server->secMode,
+ atomic_read(&server->inFlight));
#ifdef CONFIG_CIFS_STATS2
seq_printf(m, " In Send: %d In MaxReq Wait: %d",
- atomic_read(&ses->server->inSend),
- atomic_read(&ses->server->num_waiters));
+ atomic_read(&server->inSend),
+ atomic_read(&server->num_waiters));
#endif
- seq_puts(m, "\nMIDs:\n");
+ seq_puts(m, "\n\tShares:");
+ j = 0;
+ list_for_each(tmp3, &ses->tcon_list) {
+ tcon = list_entry(tmp3, struct cifsTconInfo,
+ tcon_list);
+ ++j;
+ dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType);
+ seq_printf(m, "\n\t%d) %s Mounts: %d ", j,
+ tcon->treeName, tcon->tc_count);
+ if (tcon->nativeFileSystem) {
+ seq_printf(m, "Type: %s ",
+ tcon->nativeFileSystem);
+ }
+ seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x"
+ "\nPathComponentMax: %d Status: 0x%d",
+ le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics),
+ le32_to_cpu(tcon->fsAttrInfo.Attributes),
+ le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength),
+ tcon->tidStatus);
+ if (dev_type == FILE_DEVICE_DISK)
+ seq_puts(m, " type: DISK ");
+ else if (dev_type == FILE_DEVICE_CD_ROM)
+ seq_puts(m, " type: CDROM ");
+ else
+ seq_printf(m, " type: %d ", dev_type);
+
+ if (tcon->need_reconnect)
+ seq_puts(m, "\tDISCONNECTED ");
+ seq_putc(m, '\n');
+ }
+
+ seq_puts(m, "\n\tMIDs:\n");
spin_lock(&GlobalMid_Lock);
- list_for_each(tmp1, &ses->server->pending_mid_q) {
- mid_entry = list_entry(tmp1, struct
- mid_q_entry,
+ list_for_each(tmp3, &server->pending_mid_q) {
+ mid_entry = list_entry(tmp3, struct mid_q_entry,
qhead);
- seq_printf(m, "State: %d com: %d pid:"
+ seq_printf(m, "\tState: %d com: %d pid:"
" %d tsk: %p mid %d\n",
mid_entry->midState,
(int)mid_entry->command,
}
spin_unlock(&GlobalMid_Lock);
}
-
- }
- read_unlock(&GlobalSMBSeslock);
- seq_putc(m, '\n');
-
- seq_puts(m, "Shares:");
-
- i = 0;
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalTreeConnectionList) {
- __u32 dev_type;
- i++;
- tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType);
- seq_printf(m, "\n%d) %s Uses: %d ", i,
- tcon->treeName, atomic_read(&tcon->useCount));
- if (tcon->nativeFileSystem) {
- seq_printf(m, "Type: %s ",
- tcon->nativeFileSystem);
- }
- seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x"
- "\nPathComponentMax: %d Status: %d",
- le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics),
- le32_to_cpu(tcon->fsAttrInfo.Attributes),
- le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength),
- tcon->tidStatus);
- if (dev_type == FILE_DEVICE_DISK)
- seq_puts(m, " type: DISK ");
- else if (dev_type == FILE_DEVICE_CD_ROM)
- seq_puts(m, " type: CDROM ");
- else
- seq_printf(m, " type: %d ", dev_type);
-
- if (tcon->tidStatus == CifsNeedReconnect)
- seq_puts(m, "\tDISCONNECTED ");
}
- read_unlock(&GlobalSMBSeslock);
-
+ read_unlock(&cifs_tcp_ses_lock);
seq_putc(m, '\n');
/* BB add code to dump additional info such as TCP session info now */
{
char c;
int rc;
- struct list_head *tmp;
+ struct list_head *tmp1, *tmp2, *tmp3;
+ struct TCP_Server_Info *server;
+ struct cifsSesInfo *ses;
struct cifsTconInfo *tcon;
rc = get_user(c, buffer);
return rc;
if (c == '1' || c == 'y' || c == 'Y' || c == '0') {
- read_lock(&GlobalSMBSeslock);
#ifdef CONFIG_CIFS_STATS2
atomic_set(&totBufAllocCount, 0);
atomic_set(&totSmBufAllocCount, 0);
#endif /* CONFIG_CIFS_STATS2 */
- list_for_each(tmp, &GlobalTreeConnectionList) {
- tcon = list_entry(tmp, struct cifsTconInfo,
- cifsConnectionList);
- atomic_set(&tcon->num_smbs_sent, 0);
- atomic_set(&tcon->num_writes, 0);
- atomic_set(&tcon->num_reads, 0);
- atomic_set(&tcon->num_oplock_brks, 0);
- atomic_set(&tcon->num_opens, 0);
- atomic_set(&tcon->num_closes, 0);
- atomic_set(&tcon->num_deletes, 0);
- atomic_set(&tcon->num_mkdirs, 0);
- atomic_set(&tcon->num_rmdirs, 0);
- atomic_set(&tcon->num_renames, 0);
- atomic_set(&tcon->num_t2renames, 0);
- atomic_set(&tcon->num_ffirst, 0);
- atomic_set(&tcon->num_fnext, 0);
- atomic_set(&tcon->num_fclose, 0);
- atomic_set(&tcon->num_hardlinks, 0);
- atomic_set(&tcon->num_symlinks, 0);
- atomic_set(&tcon->num_locks, 0);
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp1, &cifs_tcp_ses_list) {
+ server = list_entry(tmp1, struct TCP_Server_Info,
+ tcp_ses_list);
+ list_for_each(tmp2, &server->smb_ses_list) {
+ ses = list_entry(tmp2, struct cifsSesInfo,
+ smb_ses_list);
+ list_for_each(tmp3, &ses->tcon_list) {
+ tcon = list_entry(tmp3,
+ struct cifsTconInfo,
+ tcon_list);
+ atomic_set(&tcon->num_smbs_sent, 0);
+ atomic_set(&tcon->num_writes, 0);
+ atomic_set(&tcon->num_reads, 0);
+ atomic_set(&tcon->num_oplock_brks, 0);
+ atomic_set(&tcon->num_opens, 0);
+ atomic_set(&tcon->num_closes, 0);
+ atomic_set(&tcon->num_deletes, 0);
+ atomic_set(&tcon->num_mkdirs, 0);
+ atomic_set(&tcon->num_rmdirs, 0);
+ atomic_set(&tcon->num_renames, 0);
+ atomic_set(&tcon->num_t2renames, 0);
+ atomic_set(&tcon->num_ffirst, 0);
+ atomic_set(&tcon->num_fnext, 0);
+ atomic_set(&tcon->num_fclose, 0);
+ atomic_set(&tcon->num_hardlinks, 0);
+ atomic_set(&tcon->num_symlinks, 0);
+ atomic_set(&tcon->num_locks, 0);
+ }
+ }
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
}
return count;
static int cifs_stats_proc_show(struct seq_file *m, void *v)
{
int i;
- struct list_head *tmp;
+ struct list_head *tmp1, *tmp2, *tmp3;
+ struct TCP_Server_Info *server;
+ struct cifsSesInfo *ses;
struct cifsTconInfo *tcon;
seq_printf(m,
GlobalCurrentXid, GlobalMaxActiveXid);
i = 0;
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalTreeConnectionList) {
- i++;
- tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- seq_printf(m, "\n%d) %s", i, tcon->treeName);
- if (tcon->tidStatus == CifsNeedReconnect)
- seq_puts(m, "\tDISCONNECTED ");
- seq_printf(m, "\nSMBs: %d Oplock Breaks: %d",
- atomic_read(&tcon->num_smbs_sent),
- atomic_read(&tcon->num_oplock_brks));
- seq_printf(m, "\nReads: %d Bytes: %lld",
- atomic_read(&tcon->num_reads),
- (long long)(tcon->bytes_read));
- seq_printf(m, "\nWrites: %d Bytes: %lld",
- atomic_read(&tcon->num_writes),
- (long long)(tcon->bytes_written));
- seq_printf(m,
- "\nLocks: %d HardLinks: %d Symlinks: %d",
- atomic_read(&tcon->num_locks),
- atomic_read(&tcon->num_hardlinks),
- atomic_read(&tcon->num_symlinks));
-
- seq_printf(m, "\nOpens: %d Closes: %d Deletes: %d",
- atomic_read(&tcon->num_opens),
- atomic_read(&tcon->num_closes),
- atomic_read(&tcon->num_deletes));
- seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
- atomic_read(&tcon->num_mkdirs),
- atomic_read(&tcon->num_rmdirs));
- seq_printf(m, "\nRenames: %d T2 Renames %d",
- atomic_read(&tcon->num_renames),
- atomic_read(&tcon->num_t2renames));
- seq_printf(m, "\nFindFirst: %d FNext %d FClose %d",
- atomic_read(&tcon->num_ffirst),
- atomic_read(&tcon->num_fnext),
- atomic_read(&tcon->num_fclose));
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp1, &cifs_tcp_ses_list) {
+ server = list_entry(tmp1, struct TCP_Server_Info,
+ tcp_ses_list);
+ list_for_each(tmp2, &server->smb_ses_list) {
+ ses = list_entry(tmp2, struct cifsSesInfo,
+ smb_ses_list);
+ list_for_each(tmp3, &ses->tcon_list) {
+ tcon = list_entry(tmp3,
+ struct cifsTconInfo,
+ tcon_list);
+ i++;
+ seq_printf(m, "\n%d) %s", i, tcon->treeName);
+ if (tcon->need_reconnect)
+ seq_puts(m, "\tDISCONNECTED ");
+ seq_printf(m, "\nSMBs: %d Oplock Breaks: %d",
+ atomic_read(&tcon->num_smbs_sent),
+ atomic_read(&tcon->num_oplock_brks));
+ seq_printf(m, "\nReads: %d Bytes: %lld",
+ atomic_read(&tcon->num_reads),
+ (long long)(tcon->bytes_read));
+ seq_printf(m, "\nWrites: %d Bytes: %lld",
+ atomic_read(&tcon->num_writes),
+ (long long)(tcon->bytes_written));
+ seq_printf(m, "\nLocks: %d HardLinks: %d "
+ "Symlinks: %d",
+ atomic_read(&tcon->num_locks),
+ atomic_read(&tcon->num_hardlinks),
+ atomic_read(&tcon->num_symlinks));
+ seq_printf(m, "\nOpens: %d Closes: %d"
+ "Deletes: %d",
+ atomic_read(&tcon->num_opens),
+ atomic_read(&tcon->num_closes),
+ atomic_read(&tcon->num_deletes));
+ seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
+ atomic_read(&tcon->num_mkdirs),
+ atomic_read(&tcon->num_rmdirs));
+ seq_printf(m, "\nRenames: %d T2 Renames %d",
+ atomic_read(&tcon->num_renames),
+ atomic_read(&tcon->num_t2renames));
+ seq_printf(m, "\nFindFirst: %d FNext %d "
+ "FClose %d",
+ atomic_read(&tcon->num_ffirst),
+ atomic_read(&tcon->num_fnext),
+ atomic_read(&tcon->num_fclose));
+ }
+ }
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
seq_putc(m, '\n');
return 0;
/**
* compose_mount_options - creates mount options for refferral
* @sb_mountdata: parent/root DFS mount options (template)
- * @ref_unc: refferral server UNC
+ * @dentry: point where we are going to mount
+ * @ref: server's referral
* @devname: pointer for saving device name
*
* creates mount options for submount based on template options sb_mountdata
* Caller is responcible for freeing retunrned value if it is not error.
*/
static char *compose_mount_options(const char *sb_mountdata,
- const char *ref_unc,
+ struct dentry *dentry,
+ const struct dfs_info3_param *ref,
char **devname)
{
int rc;
char *srvIP = NULL;
char sep = ',';
int off, noff;
+ char *fullpath;
if (sb_mountdata == NULL)
return ERR_PTR(-EINVAL);
- *devname = cifs_get_share_name(ref_unc);
+ *devname = cifs_get_share_name(ref->node_name);
rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
if (rc != 0) {
cERROR(1, ("%s: Failed to resolve server part of %s to IP",
mountdata = ERR_PTR(rc);
goto compose_mount_options_out;
}
- md_len = strlen(sb_mountdata) + strlen(srvIP) + strlen(ref_unc) + 3;
+ /* md_len = strlen(...) + 12 for 'sep+prefixpath='
+ * assuming that we have 'unc=' and 'ip=' in
+ * the original sb_mountdata
+ */
+ md_len = strlen(sb_mountdata) + strlen(srvIP) +
+ strlen(ref->node_name) + 12;
mountdata = kzalloc(md_len+1, GFP_KERNEL);
if (mountdata == NULL) {
mountdata = ERR_PTR(-ENOMEM);
strncpy(mountdata, sb_mountdata, 5);
off += 5;
}
- while ((tkn_e = strchr(sb_mountdata+off, sep))) {
- noff = (tkn_e - (sb_mountdata+off)) + 1;
- if (strnicmp(sb_mountdata+off, "unc=", 4) == 0) {
+
+ do {
+ tkn_e = strchr(sb_mountdata + off, sep);
+ if (tkn_e == NULL)
+ noff = strlen(sb_mountdata + off);
+ else
+ noff = tkn_e - (sb_mountdata + off) + 1;
+
+ if (strnicmp(sb_mountdata + off, "unc=", 4) == 0) {
off += noff;
continue;
}
- if (strnicmp(sb_mountdata+off, "ip=", 3) == 0) {
+ if (strnicmp(sb_mountdata + off, "ip=", 3) == 0) {
off += noff;
continue;
}
- if (strnicmp(sb_mountdata+off, "prefixpath=", 3) == 0) {
+ if (strnicmp(sb_mountdata + off, "prefixpath=", 11) == 0) {
off += noff;
continue;
}
- strncat(mountdata, sb_mountdata+off, noff);
+ strncat(mountdata, sb_mountdata + off, noff);
off += noff;
- }
- strcat(mountdata, sb_mountdata+off);
+ } while (tkn_e);
+ strcat(mountdata, sb_mountdata + off);
mountdata[md_len] = '\0';
/* copy new IP and ref share name */
- strcat(mountdata, ",ip=");
+ if (mountdata[strlen(mountdata) - 1] != sep)
+ strncat(mountdata, &sep, 1);
+ strcat(mountdata, "ip=");
strcat(mountdata, srvIP);
- strcat(mountdata, ",unc=");
+ strncat(mountdata, &sep, 1);
+ strcat(mountdata, "unc=");
strcat(mountdata, *devname);
/* find & copy prefixpath */
- tkn_e = strchr(ref_unc+2, '\\');
- if (tkn_e) {
- tkn_e = strchr(tkn_e+1, '\\');
- if (tkn_e) {
- strcat(mountdata, ",prefixpath=");
- strcat(mountdata, tkn_e+1);
- }
+ tkn_e = strchr(ref->node_name + 2, '\\');
+ if (tkn_e == NULL) /* invalid unc, missing share name*/
+ goto compose_mount_options_out;
+
+ fullpath = build_path_from_dentry(dentry);
+ tkn_e = strchr(tkn_e + 1, '\\');
+ if (tkn_e || strlen(fullpath) - (ref->path_consumed)) {
+ strncat(mountdata, &sep, 1);
+ strcat(mountdata, "prefixpath=");
+ if (tkn_e)
+ strcat(mountdata, tkn_e + 1);
+ strcat(mountdata, fullpath + (ref->path_consumed));
}
+ kfree(fullpath);
/*cFYI(1,("%s: parent mountdata: %s", __func__,sb_mountdata));*/
/*cFYI(1, ("%s: submount mountdata: %s", __func__, mountdata ));*/
static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent,
- struct dentry *dentry, char *ref_unc)
+ struct dentry *dentry, const struct dfs_info3_param *ref)
{
struct cifs_sb_info *cifs_sb;
struct vfsmount *mnt;
cifs_sb = CIFS_SB(dentry->d_inode->i_sb);
mountdata = compose_mount_options(cifs_sb->mountdata,
- ref_unc, &devname);
+ dentry, ref, &devname);
if (IS_ERR(mountdata))
return (struct vfsmount *)mountdata;
}
mnt = cifs_dfs_do_refmount(nd->path.mnt,
nd->path.dentry,
- referrals[i].node_name);
+ referrals + i);
cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
__func__,
referrals[i].node_name, mnt));
* strlen(";sec=ntlmsspi") */
#define MAX_MECH_STR_LEN 13
-/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */
-#define MAX_IPV6_ADDR_LEN 42
+/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/128 */
+#define MAX_IPV6_ADDR_LEN 43
/* strlen of "host=" */
#define HOST_KEY_LEN 5
tcon = cifs_sb->tcon;
if (tcon == NULL)
return;
- down(&tcon->tconSem);
- if (atomic_read(&tcon->useCount) == 1)
+
+ read_lock(&cifs_tcp_ses_lock);
+ if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
- up(&tcon->tconSem);
+ read_unlock(&cifs_tcp_ses_lock);
/* cancel_brl_requests(tcon); */ /* BB mark all brl mids as exiting */
/* cancel_notify_requests(tcon); */
not bother sending an oplock release if session
to server still is disconnected since oplock
already released by the server in that case */
- if (pTcon->tidStatus != CifsNeedReconnect) {
+ if (!pTcon->need_reconnect) {
rc = CIFSSMBLock(0, pTcon, netfid,
0 /* len */ , 0 /* offset */, 0,
0, LOCKING_ANDX_OPLOCK_RELEASE,
static int cifs_dnotify_thread(void *dummyarg)
{
struct list_head *tmp;
- struct cifsSesInfo *ses;
+ struct TCP_Server_Info *server;
do {
if (try_to_freeze())
continue;
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(15*HZ);
- read_lock(&GlobalSMBSeslock);
/* check if any stuck requests that need
to be woken up and wakeq so the
thread can wake up and error out */
- list_for_each(tmp, &GlobalSMBSessionList) {
- ses = list_entry(tmp, struct cifsSesInfo,
- cifsSessionList);
- if (ses->server && atomic_read(&ses->server->inFlight))
- wake_up_all(&ses->server->response_q);
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &cifs_tcp_ses_list) {
+ server = list_entry(tmp, struct TCP_Server_Info,
+ tcp_ses_list);
+ if (atomic_read(&server->inFlight))
+ wake_up_all(&server->response_q);
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
} while (!kthread_should_stop());
return 0;
{
int rc = 0;
cifs_proc_init();
-/* INIT_LIST_HEAD(&GlobalServerList);*/ /* BB not implemented yet */
- INIT_LIST_HEAD(&GlobalSMBSessionList);
- INIT_LIST_HEAD(&GlobalTreeConnectionList);
+ INIT_LIST_HEAD(&cifs_tcp_ses_list);
INIT_LIST_HEAD(&GlobalOplock_Q);
#ifdef CONFIG_CIFS_EXPERIMENTAL
INIT_LIST_HEAD(&GlobalDnotifyReqList);
GlobalMaxActiveXid = 0;
memset(Local_System_Name, 0, 15);
rwlock_init(&GlobalSMBSeslock);
+ rwlock_init(&cifs_tcp_ses_lock);
spin_lock_init(&GlobalMid_Lock);
if (cifs_max_pending < 2) {
};
enum protocolEnum {
- IPV4 = 0,
- IPV6,
+ TCP = 0,
SCTP
/* Netbios frames protocol not supported at this time */
};
*/
struct TCP_Server_Info {
+ struct list_head tcp_ses_list;
+ struct list_head smb_ses_list;
+ int srv_count; /* reference counter */
/* 15 character server name + 0x20 16th byte indicating type = srv */
char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL];
char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2];
bool svlocal:1; /* local server or remote */
bool noblocksnd; /* use blocking sendmsg */
bool noautotune; /* do not autotune send buf sizes */
- atomic_t socketUseCount; /* number of open cifs sessions on socket */
atomic_t inFlight; /* number of requests on the wire to server */
#ifdef CONFIG_CIFS_STATS2
atomic_t inSend; /* requests trying to send */
* Session structure. One of these for each uid session with a particular host
*/
struct cifsSesInfo {
- struct list_head cifsSessionList;
+ struct list_head smb_ses_list;
+ struct list_head tcon_list;
struct semaphore sesSem;
#if 0
struct cifsUidInfo *uidInfo; /* pointer to user info */
#endif
struct TCP_Server_Info *server; /* pointer to server info */
- atomic_t inUse; /* # of mounts (tree connections) on this ses */
+ int ses_count; /* reference counter */
enum statusEnum status;
unsigned overrideSecFlg; /* if non-zero override global sec flags */
__u16 ipc_tid; /* special tid for connection to IPC share */
char userName[MAX_USERNAME_SIZE + 1];
char *domainName;
char *password;
+ bool need_reconnect:1; /* connection reset, uid now invalid */
};
/* no more than one of the following three session flags may be set */
#define CIFS_SES_NT4 1
* session
*/
struct cifsTconInfo {
- struct list_head cifsConnectionList;
+ struct list_head tcon_list;
+ int tc_count;
struct list_head openFileList;
- struct semaphore tconSem;
struct cifsSesInfo *ses; /* pointer to session associated with */
char treeName[MAX_TREE_SIZE + 1]; /* UNC name of resource in ASCII */
char *nativeFileSystem;
__u16 tid; /* The 2 byte tree id */
__u16 Flags; /* optional support bits */
enum statusEnum tidStatus;
- atomic_t useCount; /* how many explicit/implicit mounts to share */
#ifdef CONFIG_CIFS_STATS
atomic_t num_smbs_sent;
atomic_t num_writes;
bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol
for this mount even if server would support */
bool local_lease:1; /* check leases (only) on local system not remote */
+ bool need_reconnect:1; /* connection reset, tid now invalid */
/* BB add field for back pointer to sb struct(s)? */
};
#endif
/*
- * The list of servers that did not respond with NT LM 0.12.
- * This list helps improve performance and eliminate the messages indicating
- * that we had a communications error talking to the server in this list.
+ * the list of TCP_Server_Info structures, ie each of the sockets
+ * connecting our client to a distinct server (ip address), is
+ * chained together by cifs_tcp_ses_list. The list of all our SMB
+ * sessions (and from that the tree connections) can be found
+ * by iterating over cifs_tcp_ses_list
*/
-/* Feature not supported */
-/* GLOBAL_EXTERN struct servers_not_supported *NotSuppList; */
+GLOBAL_EXTERN struct list_head cifs_tcp_ses_list;
/*
- * The following is a hash table of all the users we know about.
+ * This lock protects the cifs_tcp_ses_list, the list of smb sessions per
+ * tcp session, and the list of tcon's per smb session. It also protects
+ * the reference counters for the server, smb session, and tcon. Finally,
+ * changes to the tcon->tidStatus should be done while holding this lock.
*/
-GLOBAL_EXTERN struct smbUidInfo *GlobalUidList[UID_HASH];
+GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock;
-/* GLOBAL_EXTERN struct list_head GlobalServerList; BB not implemented yet */
-GLOBAL_EXTERN struct list_head GlobalSMBSessionList;
-GLOBAL_EXTERN struct list_head GlobalTreeConnectionList;
-GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */
+/*
+ * This lock protects the cifs_file->llist and cifs_file->flist
+ * list operations, and updates to some flags (cifs_file->invalidHandle)
+ * It will be moved to either use the tcon->stat_lock or equivalent later.
+ * If cifs_tcp_ses_lock and the lock below are both needed to be held, then
+ * the cifs_tcp_ses_lock must be grabbed first and released last.
+ */
+GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;
GLOBAL_EXTERN struct list_head GlobalOplock_Q;
/* need to prevent multiple threads trying to
simultaneously reconnect the same SMB session */
down(&tcon->ses->sesSem);
- if (tcon->ses->status == CifsNeedReconnect)
+ if (tcon->ses->need_reconnect)
rc = cifs_setup_session(0, tcon->ses,
nls_codepage);
- if (!rc && (tcon->tidStatus == CifsNeedReconnect)) {
+ if (!rc && (tcon->need_reconnect)) {
mark_open_files_invalid(tcon);
rc = CIFSTCon(0, tcon->ses, tcon->treeName,
tcon, nls_codepage);
/* need to prevent multiple threads trying to
simultaneously reconnect the same SMB session */
down(&tcon->ses->sesSem);
- if (tcon->ses->status == CifsNeedReconnect)
+ if (tcon->ses->need_reconnect)
rc = cifs_setup_session(0, tcon->ses,
nls_codepage);
- if (!rc && (tcon->tidStatus == CifsNeedReconnect)) {
+ if (!rc && (tcon->need_reconnect)) {
mark_open_files_invalid(tcon);
rc = CIFSTCon(0, tcon->ses, tcon->treeName,
tcon, nls_codepage);
rc = -EIO;
goto neg_err_exit;
}
-
- if (server->socketUseCount.counter > 1) {
+ read_lock(&cifs_tcp_ses_lock);
+ if (server->srv_count > 1) {
+ read_unlock(&cifs_tcp_ses_lock);
if (memcmp(server->server_GUID,
pSMBr->u.extended_response.
GUID, 16) != 0) {
pSMBr->u.extended_response.GUID,
16);
}
- } else
+ } else {
+ read_unlock(&cifs_tcp_ses_lock);
memcpy(server->server_GUID,
pSMBr->u.extended_response.GUID, 16);
+ }
if (count == 16) {
server->secType = RawNTLMSSP;
int rc = 0;
cFYI(1, ("In tree disconnect"));
- /*
- * If last user of the connection and
- * connection alive - disconnect it
- * If this is the last connection on the server session disconnect it
- * (and inside session disconnect we should check if tcp socket needs
- * to be freed and kernel thread woken up).
- */
- if (tcon)
- down(&tcon->tconSem);
- else
- return -EIO;
- atomic_dec(&tcon->useCount);
- if (atomic_read(&tcon->useCount) > 0) {
- up(&tcon->tconSem);
- return -EBUSY;
- }
+ /* BB: do we need to check this? These should never be NULL. */
+ if ((tcon->ses == NULL) || (tcon->ses->server == NULL))
+ return -EIO;
- /* No need to return error on this operation if tid invalidated and
- closed on server already e.g. due to tcp session crashing */
- if (tcon->tidStatus == CifsNeedReconnect) {
- up(&tcon->tconSem);
+ /*
+ * No need to return error on this operation if tid invalidated and
+ * closed on server already e.g. due to tcp session crashing. Also,
+ * the tcon is no longer on the list, so no need to take lock before
+ * checking this.
+ */
+ if (tcon->need_reconnect)
return 0;
- }
- if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) {
- up(&tcon->tconSem);
- return -EIO;
- }
rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
(void **)&smb_buffer);
- if (rc) {
- up(&tcon->tconSem);
+ if (rc)
return rc;
- }
rc = SendReceiveNoRsp(xid, tcon->ses, smb_buffer, 0);
if (rc)
cFYI(1, ("Tree disconnect failed %d", rc));
- up(&tcon->tconSem);
-
/* No need to return error on this operation if tid invalidated and
- closed on server already e.g. due to tcp session crashing */
+ closed on server already e.g. due to tcp session crashing */
if (rc == -EAGAIN)
rc = 0;
int rc = 0;
cFYI(1, ("In SMBLogoff for session disconnect"));
- if (ses)
- down(&ses->sesSem);
- else
+
+ /*
+ * BB: do we need to check validity of ses and server? They should
+ * always be valid since we have an active reference. If not, that
+ * should probably be a BUG()
+ */
+ if (!ses || !ses->server)
return -EIO;
- atomic_dec(&ses->inUse);
- if (atomic_read(&ses->inUse) > 0) {
- up(&ses->sesSem);
- return -EBUSY;
- }
+ down(&ses->sesSem);
+ if (ses->need_reconnect)
+ goto session_already_dead; /* no need to send SMBlogoff if uid
+ already closed due to reconnect */
rc = small_smb_init(SMB_COM_LOGOFF_ANDX, 2, NULL, (void **)&pSMB);
if (rc) {
up(&ses->sesSem);
return rc;
}
- if (ses->server) {
- pSMB->hdr.Mid = GetNextMid(ses->server);
+ pSMB->hdr.Mid = GetNextMid(ses->server);
- if (ses->server->secMode &
+ if (ses->server->secMode &
(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
- }
pSMB->hdr.Uid = ses->Suid;
pSMB->AndXCommand = 0xFF;
rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0);
- if (ses->server) {
- atomic_dec(&ses->server->socketUseCount);
- if (atomic_read(&ses->server->socketUseCount) == 0) {
- spin_lock(&GlobalMid_Lock);
- ses->server->tcpStatus = CifsExiting;
- spin_unlock(&GlobalMid_Lock);
- rc = -ESHUTDOWN;
- }
- }
+session_already_dead:
up(&ses->sesSem);
/* if session dead then we do not need to do ulogoff,
return rc;
}
+/* computes length of UCS string converted to host codepage
+ * @src: UCS string
+ * @maxlen: length of the input string in UCS characters
+ * (not in bytes)
+ *
+ * return: size of input string in host codepage
+ */
+static int hostlen_fromUCS(const __le16 *src, const int maxlen,
+ const struct nls_table *nls_codepage) {
+ int i;
+ int hostlen = 0;
+ char to[4];
+ int charlen;
+ for (i = 0; (i < maxlen) && src[i]; ++i) {
+ charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
+ to, NLS_MAX_CHARSET_SIZE);
+ hostlen += charlen > 0 ? charlen : 1;
+ }
+ return hostlen;
+}
+
/* parses DFS refferal V3 structure
* caller is responsible for freeing target_nodes
* returns:
parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
unsigned int *num_of_nodes,
struct dfs_info3_param **target_nodes,
- const struct nls_table *nls_codepage)
+ const struct nls_table *nls_codepage, int remap,
+ const char *searchName)
{
int i, rc = 0;
char *data_end;
struct dfs_info3_param *node = (*target_nodes)+i;
node->flags = le16_to_cpu(pSMBr->DFSFlags);
- node->path_consumed = le16_to_cpu(pSMBr->PathConsumed);
+ if (is_unicode) {
+ __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+ cifsConvertToUCS((__le16 *) tmp, searchName,
+ PATH_MAX, nls_codepage, remap);
+ node->path_consumed = hostlen_fromUCS(tmp,
+ le16_to_cpu(pSMBr->PathConsumed)/2,
+ nls_codepage);
+ kfree(tmp);
+ } else
+ node->path_consumed = le16_to_cpu(pSMBr->PathConsumed);
+
node->server_type = le16_to_cpu(ref->ServerType);
node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags);
/* parse returned result into more usable form */
rc = parse_DFS_referrals(pSMBr, num_of_nodes,
- target_nodes, nls_codepage);
+ target_nodes, nls_codepage, remap,
+ searchName);
GetDFSRefExit:
cifs_buf_release(pSMB);
cifs_reconnect(struct TCP_Server_Info *server)
{
int rc = 0;
- struct list_head *tmp;
+ struct list_head *tmp, *tmp2;
struct cifsSesInfo *ses;
struct cifsTconInfo *tcon;
struct mid_q_entry *mid_entry;
/* before reconnecting the tcp session, mark the smb session (uid)
and the tid bad so they are not used until reconnected */
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalSMBSessionList) {
- ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
- if (ses->server) {
- if (ses->server == server) {
- ses->status = CifsNeedReconnect;
- ses->ipc_tid = 0;
- }
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &server->smb_ses_list) {
+ ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list);
+ ses->need_reconnect = true;
+ ses->ipc_tid = 0;
+ list_for_each(tmp2, &ses->tcon_list) {
+ tcon = list_entry(tmp2, struct cifsTconInfo, tcon_list);
+ tcon->need_reconnect = true;
}
- /* else tcp and smb sessions need reconnection */
- }
- list_for_each(tmp, &GlobalTreeConnectionList) {
- tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- if ((tcon->ses) && (tcon->ses->server == server))
- tcon->tidStatus = CifsNeedReconnect;
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
/* do not want to be sending data on a socket we are freeing */
down(&server->tcpSem);
if (server->ssocket) {
while ((server->tcpStatus != CifsExiting) &&
(server->tcpStatus != CifsGood)) {
try_to_freeze();
- if (server->protocolType == IPV6) {
+ if (server->addr.sockAddr6.sin6_family == AF_INET6) {
rc = ipv6_connect(&server->addr.sockAddr6,
&server->ssocket, server->noautotune);
} else {
msleep(1); /* minimum sleep to prevent looping
allowing socket to clear and app threads to set
tcpStatus CifsNeedReconnect if server hung */
- if (pdu_length < 4)
+ if (pdu_length < 4) {
+ iov.iov_base = (4 - pdu_length) +
+ (char *)smb_buffer;
+ iov.iov_len = pdu_length;
+ smb_msg.msg_control = NULL;
+ smb_msg.msg_controllen = 0;
goto incomplete_rcv;
- else
+ } else
continue;
} else if (length <= 0) {
if (server->tcpStatus == CifsNew) {
}
} /* end while !EXITING */
+ /* take it off the list, if it's not already */
+ write_lock(&cifs_tcp_ses_lock);
+ list_del_init(&server->tcp_ses_list);
+ write_unlock(&cifs_tcp_ses_lock);
+
spin_lock(&GlobalMid_Lock);
server->tcpStatus = CifsExiting;
spin_unlock(&GlobalMid_Lock);
if (smallbuf) /* no sense logging a debug message if NULL */
cifs_small_buf_release(smallbuf);
- read_lock(&GlobalSMBSeslock);
+ /*
+ * BB: we shouldn't have to do any of this. It shouldn't be
+ * possible to exit from the thread with active SMB sessions
+ */
+ read_lock(&cifs_tcp_ses_lock);
if (list_empty(&server->pending_mid_q)) {
/* loop through server session structures attached to this and
mark them dead */
- list_for_each(tmp, &GlobalSMBSessionList) {
- ses =
- list_entry(tmp, struct cifsSesInfo,
- cifsSessionList);
- if (ses->server == server) {
- ses->status = CifsExiting;
- ses->server = NULL;
- }
+ list_for_each(tmp, &server->smb_ses_list) {
+ ses = list_entry(tmp, struct cifsSesInfo,
+ smb_ses_list);
+ ses->status = CifsExiting;
+ ses->server = NULL;
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
} else {
/* although we can not zero the server struct pointer yet,
since there are active requests which may depnd on them,
mark the corresponding SMB sessions as exiting too */
- list_for_each(tmp, &GlobalSMBSessionList) {
+ list_for_each(tmp, &server->smb_ses_list) {
ses = list_entry(tmp, struct cifsSesInfo,
- cifsSessionList);
- if (ses->server == server)
- ses->status = CifsExiting;
+ smb_ses_list);
+ ses->status = CifsExiting;
}
spin_lock(&GlobalMid_Lock);
}
}
spin_unlock(&GlobalMid_Lock);
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
/* 1/8th of sec is more than enough time for them to exit */
msleep(125);
}
if there are any pointing to this (e.g
if a crazy root user tried to kill cifsd
kernel thread explicitly this might happen) */
- write_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalSMBSessionList) {
- ses = list_entry(tmp, struct cifsSesInfo,
- cifsSessionList);
- if (ses->server == server)
- ses->server = NULL;
+ /* BB: This shouldn't be necessary, see above */
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &server->smb_ses_list) {
+ ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list);
+ ses->server = NULL;
}
- write_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
kfree(server->hostname);
task_to_wake = xchg(&server->tsk, NULL);
return 0;
}
-static struct cifsSesInfo *
-cifs_find_tcp_session(struct in_addr *target_ip_addr,
- struct in6_addr *target_ip6_addr,
- char *userName, struct TCP_Server_Info **psrvTcp)
+static struct TCP_Server_Info *
+cifs_find_tcp_session(struct sockaddr *addr)
{
struct list_head *tmp;
- struct cifsSesInfo *ses;
-
- *psrvTcp = NULL;
+ struct TCP_Server_Info *server;
+ struct sockaddr_in *addr4 = (struct sockaddr_in *) addr;
+ struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *) addr;
+
+ write_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &cifs_tcp_ses_list) {
+ server = list_entry(tmp, struct TCP_Server_Info,
+ tcp_ses_list);
+ /*
+ * the demux thread can exit on its own while still in CifsNew
+ * so don't accept any sockets in that state. Since the
+ * tcpStatus never changes back to CifsNew it's safe to check
+ * for this without a lock.
+ */
+ if (server->tcpStatus == CifsNew)
+ continue;
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalSMBSessionList) {
- ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
- if (!ses->server)
+ if (addr->sa_family == AF_INET &&
+ (addr4->sin_addr.s_addr !=
+ server->addr.sockAddr.sin_addr.s_addr))
+ continue;
+ else if (addr->sa_family == AF_INET6 &&
+ memcmp(&server->addr.sockAddr6.sin6_addr,
+ &addr6->sin6_addr, sizeof(addr6->sin6_addr)))
continue;
- if (target_ip_addr &&
- ses->server->addr.sockAddr.sin_addr.s_addr != target_ip_addr->s_addr)
- continue;
- else if (target_ip6_addr &&
- memcmp(&ses->server->addr.sockAddr6.sin6_addr,
- target_ip6_addr, sizeof(*target_ip6_addr)))
- continue;
- /* BB lock server and tcp session; increment use count here?? */
+ ++server->srv_count;
+ write_unlock(&cifs_tcp_ses_lock);
+ cFYI(1, ("Existing tcp session with server found"));
+ return server;
+ }
+ write_unlock(&cifs_tcp_ses_lock);
+ return NULL;
+}
- /* found a match on the TCP session */
- *psrvTcp = ses->server;
+static void
+cifs_put_tcp_session(struct TCP_Server_Info *server)
+{
+ struct task_struct *task;
- /* BB check if reconnection needed */
- if (strncmp(ses->userName, userName, MAX_USERNAME_SIZE) == 0) {
- read_unlock(&GlobalSMBSeslock);
- /* Found exact match on both TCP and
- SMB sessions */
- return ses;
- }
- /* else tcp and smb sessions need reconnection */
+ write_lock(&cifs_tcp_ses_lock);
+ if (--server->srv_count > 0) {
+ write_unlock(&cifs_tcp_ses_lock);
+ return;
}
- read_unlock(&GlobalSMBSeslock);
- return NULL;
+ list_del_init(&server->tcp_ses_list);
+ write_unlock(&cifs_tcp_ses_lock);
+
+ spin_lock(&GlobalMid_Lock);
+ server->tcpStatus = CifsExiting;
+ spin_unlock(&GlobalMid_Lock);
+
+ task = xchg(&server->tsk, NULL);
+ if (task)
+ force_sig(SIGKILL, task);
}
-static struct cifsTconInfo *
-find_unc(__be32 new_target_ip_addr, char *uncName, char *userName)
+static struct cifsSesInfo *
+cifs_find_smb_ses(struct TCP_Server_Info *server, char *username)
{
struct list_head *tmp;
- struct cifsTconInfo *tcon;
- __be32 old_ip;
-
- read_lock(&GlobalSMBSeslock);
+ struct cifsSesInfo *ses;
- list_for_each(tmp, &GlobalTreeConnectionList) {
- cFYI(1, ("Next tcon"));
- tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- if (!tcon->ses || !tcon->ses->server)
+ write_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &server->smb_ses_list) {
+ ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list);
+ if (strncmp(ses->userName, username, MAX_USERNAME_SIZE))
continue;
- old_ip = tcon->ses->server->addr.sockAddr.sin_addr.s_addr;
- cFYI(1, ("old ip addr: %x == new ip %x ?",
- old_ip, new_target_ip_addr));
+ ++ses->ses_count;
+ write_unlock(&cifs_tcp_ses_lock);
+ return ses;
+ }
+ write_unlock(&cifs_tcp_ses_lock);
+ return NULL;
+}
- if (old_ip != new_target_ip_addr)
- continue;
+static void
+cifs_put_smb_ses(struct cifsSesInfo *ses)
+{
+ int xid;
+ struct TCP_Server_Info *server = ses->server;
- /* BB lock tcon, server, tcp session and increment use count? */
- /* found a match on the TCP session */
- /* BB check if reconnection needed */
- cFYI(1, ("IP match, old UNC: %s new: %s",
- tcon->treeName, uncName));
+ write_lock(&cifs_tcp_ses_lock);
+ if (--ses->ses_count > 0) {
+ write_unlock(&cifs_tcp_ses_lock);
+ return;
+ }
- if (strncmp(tcon->treeName, uncName, MAX_TREE_SIZE))
- continue;
+ list_del_init(&ses->smb_ses_list);
+ write_unlock(&cifs_tcp_ses_lock);
- cFYI(1, ("and old usr: %s new: %s",
- tcon->treeName, uncName));
+ if (ses->status == CifsGood) {
+ xid = GetXid();
+ CIFSSMBLogoff(xid, ses);
+ _FreeXid(xid);
+ }
+ sesInfoFree(ses);
+ cifs_put_tcp_session(server);
+}
- if (strncmp(tcon->ses->userName, userName, MAX_USERNAME_SIZE))
+static struct cifsTconInfo *
+cifs_find_tcon(struct cifsSesInfo *ses, const char *unc)
+{
+ struct list_head *tmp;
+ struct cifsTconInfo *tcon;
+
+ write_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &ses->tcon_list) {
+ tcon = list_entry(tmp, struct cifsTconInfo, tcon_list);
+ if (tcon->tidStatus == CifsExiting)
+ continue;
+ if (strncmp(tcon->treeName, unc, MAX_TREE_SIZE))
continue;
- /* matched smb session (user name) */
- read_unlock(&GlobalSMBSeslock);
+ ++tcon->tc_count;
+ write_unlock(&cifs_tcp_ses_lock);
return tcon;
}
-
- read_unlock(&GlobalSMBSeslock);
+ write_unlock(&cifs_tcp_ses_lock);
return NULL;
}
+static void
+cifs_put_tcon(struct cifsTconInfo *tcon)
+{
+ int xid;
+ struct cifsSesInfo *ses = tcon->ses;
+
+ write_lock(&cifs_tcp_ses_lock);
+ if (--tcon->tc_count > 0) {
+ write_unlock(&cifs_tcp_ses_lock);
+ return;
+ }
+
+ list_del_init(&tcon->tcon_list);
+ write_unlock(&cifs_tcp_ses_lock);
+
+ xid = GetXid();
+ CIFSSMBTDis(xid, tcon);
+ _FreeXid(xid);
+
+ DeleteTconOplockQEntries(tcon);
+ tconInfoFree(tcon);
+ cifs_put_smb_ses(ses);
+}
+
int
get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path,
const struct nls_table *nls_codepage, unsigned int *pnum_referrals,
}
}
-static void
-kill_cifsd(struct TCP_Server_Info *server)
+static void setup_cifs_sb(struct smb_vol *pvolume_info,
+ struct cifs_sb_info *cifs_sb)
{
- struct task_struct *task;
-
- task = xchg(&server->tsk, NULL);
- if (task)
- force_sig(SIGKILL, task);
+ if (pvolume_info->rsize > CIFSMaxBufSize) {
+ cERROR(1, ("rsize %d too large, using MaxBufSize",
+ pvolume_info->rsize));
+ cifs_sb->rsize = CIFSMaxBufSize;
+ } else if ((pvolume_info->rsize) &&
+ (pvolume_info->rsize <= CIFSMaxBufSize))
+ cifs_sb->rsize = pvolume_info->rsize;
+ else /* default */
+ cifs_sb->rsize = CIFSMaxBufSize;
+
+ if (pvolume_info->wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) {
+ cERROR(1, ("wsize %d too large, using 4096 instead",
+ pvolume_info->wsize));
+ cifs_sb->wsize = 4096;
+ } else if (pvolume_info->wsize)
+ cifs_sb->wsize = pvolume_info->wsize;
+ else
+ cifs_sb->wsize = min_t(const int,
+ PAGEVEC_SIZE * PAGE_CACHE_SIZE,
+ 127*1024);
+ /* old default of CIFSMaxBufSize was too small now
+ that SMB Write2 can send multiple pages in kvec.
+ RFC1001 does not describe what happens when frame
+ bigger than 128K is sent so use that as max in
+ conjunction with 52K kvec constraint on arch with 4K
+ page size */
+
+ if (cifs_sb->rsize < 2048) {
+ cifs_sb->rsize = 2048;
+ /* Windows ME may prefer this */
+ cFYI(1, ("readsize set to minimum: 2048"));
+ }
+ /* calculate prepath */
+ cifs_sb->prepath = pvolume_info->prepath;
+ if (cifs_sb->prepath) {
+ cifs_sb->prepathlen = strlen(cifs_sb->prepath);
+ /* we can not convert the / to \ in the path
+ separators in the prefixpath yet because we do not
+ know (until reset_cifs_unix_caps is called later)
+ whether POSIX PATH CAP is available. We normalize
+ the / to \ after reset_cifs_unix_caps is called */
+ pvolume_info->prepath = NULL;
+ } else
+ cifs_sb->prepathlen = 0;
+ cifs_sb->mnt_uid = pvolume_info->linux_uid;
+ cifs_sb->mnt_gid = pvolume_info->linux_gid;
+ cifs_sb->mnt_file_mode = pvolume_info->file_mode;
+ cifs_sb->mnt_dir_mode = pvolume_info->dir_mode;
+ cFYI(1, ("file mode: 0x%x dir mode: 0x%x",
+ cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode));
+
+ if (pvolume_info->noperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
+ if (pvolume_info->setuids)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID;
+ if (pvolume_info->server_ino)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM;
+ if (pvolume_info->remap)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR;
+ if (pvolume_info->no_xattr)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR;
+ if (pvolume_info->sfu_emul)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL;
+ if (pvolume_info->nobrl)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL;
+ if (pvolume_info->cifs_acl)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL;
+ if (pvolume_info->override_uid)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
+ if (pvolume_info->override_gid)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
+ if (pvolume_info->dynperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
+ if (pvolume_info->direct_io) {
+ cFYI(1, ("mounting share using direct i/o"));
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
+ }
+
+ if ((pvolume_info->cifs_acl) && (pvolume_info->dynperm))
+ cERROR(1, ("mount option dynperm ignored if cifsacl "
+ "mount option supported"));
}
int
{
int rc = 0;
int xid;
- int address_type = AF_INET;
struct socket *csocket = NULL;
- struct sockaddr_in sin_server;
- struct sockaddr_in6 sin_server6;
+ struct sockaddr addr;
+ struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr;
+ struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr;
struct smb_vol volume_info;
struct cifsSesInfo *pSesInfo = NULL;
- struct cifsSesInfo *existingCifsSes = NULL;
struct cifsTconInfo *tcon = NULL;
struct TCP_Server_Info *srvTcp = NULL;
/* cFYI(1, ("Entering cifs_mount. Xid: %d with: %s", xid, mount_data)); */
+ memset(&addr, 0, sizeof(struct sockaddr));
memset(&volume_info, 0, sizeof(struct smb_vol));
if (cifs_parse_mount_options(mount_data, devname, &volume_info)) {
rc = -EINVAL;
if (volume_info.UNCip && volume_info.UNC) {
rc = cifs_inet_pton(AF_INET, volume_info.UNCip,
- &sin_server.sin_addr.s_addr);
+ &sin_server->sin_addr.s_addr);
if (rc <= 0) {
/* not ipv4 address, try ipv6 */
rc = cifs_inet_pton(AF_INET6, volume_info.UNCip,
- &sin_server6.sin6_addr.in6_u);
+ &sin_server6->sin6_addr.in6_u);
if (rc > 0)
- address_type = AF_INET6;
+ addr.sa_family = AF_INET6;
} else {
- address_type = AF_INET;
+ addr.sa_family = AF_INET;
}
if (rc <= 0) {
}
}
- if (address_type == AF_INET)
- existingCifsSes = cifs_find_tcp_session(&sin_server.sin_addr,
- NULL /* no ipv6 addr */,
- volume_info.username, &srvTcp);
- else if (address_type == AF_INET6) {
- cFYI(1, ("looking for ipv6 address"));
- existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */,
- &sin_server6.sin6_addr,
- volume_info.username, &srvTcp);
- } else {
- rc = -EINVAL;
- goto out;
- }
-
- if (srvTcp) {
- cFYI(1, ("Existing tcp session with server found"));
- } else { /* create socket */
- if (volume_info.port)
- sin_server.sin_port = htons(volume_info.port);
- else
- sin_server.sin_port = 0;
- if (address_type == AF_INET6) {
+ srvTcp = cifs_find_tcp_session(&addr);
+ if (!srvTcp) { /* create socket */
+ if (addr.sa_family == AF_INET6) {
cFYI(1, ("attempting ipv6 connect"));
/* BB should we allow ipv6 on port 139? */
/* other OS never observed in Wild doing 139 with v6 */
- rc = ipv6_connect(&sin_server6, &csocket,
+ sin_server6->sin6_port = htons(volume_info.port);
+ rc = ipv6_connect(sin_server6, &csocket,
volume_info.noblocksnd);
- } else
- rc = ipv4_connect(&sin_server, &csocket,
+ } else {
+ sin_server->sin_port = htons(volume_info.port);
+ rc = ipv4_connect(sin_server, &csocket,
volume_info.source_rfc1001_name,
volume_info.target_rfc1001_name,
volume_info.noblocksnd,
volume_info.noautotune);
+ }
if (rc < 0) {
- cERROR(1, ("Error connecting to IPv4 socket. "
+ cERROR(1, ("Error connecting to socket. "
"Aborting operation"));
if (csocket != NULL)
sock_release(csocket);
} else {
srvTcp->noblocksnd = volume_info.noblocksnd;
srvTcp->noautotune = volume_info.noautotune;
- memcpy(&srvTcp->addr.sockAddr, &sin_server,
- sizeof(struct sockaddr_in));
+ if (addr.sa_family == AF_INET6)
+ memcpy(&srvTcp->addr.sockAddr6, sin_server6,
+ sizeof(struct sockaddr_in6));
+ else
+ memcpy(&srvTcp->addr.sockAddr, sin_server,
+ sizeof(struct sockaddr_in));
atomic_set(&srvTcp->inFlight, 0);
/* BB Add code for ipv6 case too */
srvTcp->ssocket = csocket;
- srvTcp->protocolType = IPV4;
srvTcp->hostname = extract_hostname(volume_info.UNC);
if (IS_ERR(srvTcp->hostname)) {
rc = PTR_ERR(srvTcp->hostname);
memcpy(srvTcp->server_RFC1001_name,
volume_info.target_rfc1001_name, 16);
srvTcp->sequence_number = 0;
+ INIT_LIST_HEAD(&srvTcp->tcp_ses_list);
+ INIT_LIST_HEAD(&srvTcp->smb_ses_list);
+ ++srvTcp->srv_count;
+ write_lock(&cifs_tcp_ses_lock);
+ list_add(&srvTcp->tcp_ses_list,
+ &cifs_tcp_ses_list);
+ write_unlock(&cifs_tcp_ses_lock);
}
}
- if (existingCifsSes) {
- pSesInfo = existingCifsSes;
+ pSesInfo = cifs_find_smb_ses(srvTcp, volume_info.username);
+ if (pSesInfo) {
cFYI(1, ("Existing smb sess found (status=%d)",
pSesInfo->status));
+ /*
+ * The existing SMB session already has a reference to srvTcp,
+ * so we can put back the extra one we got before
+ */
+ cifs_put_tcp_session(srvTcp);
+
down(&pSesInfo->sesSem);
- if (pSesInfo->status == CifsNeedReconnect) {
+ if (pSesInfo->need_reconnect) {
cFYI(1, ("Session needs reconnect"));
rc = cifs_setup_session(xid, pSesInfo,
cifs_sb->local_nls);
} else if (!rc) {
cFYI(1, ("Existing smb sess not found"));
pSesInfo = sesInfoAlloc();
- if (pSesInfo == NULL)
+ if (pSesInfo == NULL) {
rc = -ENOMEM;
- else {
- pSesInfo->server = srvTcp;
- sprintf(pSesInfo->serverName, "%u.%u.%u.%u",
- NIPQUAD(sin_server.sin_addr.s_addr));
- }
+ goto mount_fail_check;
+ }
+
+ /* new SMB session uses our srvTcp ref */
+ pSesInfo->server = srvTcp;
+ sprintf(pSesInfo->serverName, "%u.%u.%u.%u",
+ NIPQUAD(sin_server->sin_addr.s_addr));
+
+ write_lock(&cifs_tcp_ses_lock);
+ list_add(&pSesInfo->smb_ses_list, &srvTcp->smb_ses_list);
+ write_unlock(&cifs_tcp_ses_lock);
+
+ /* volume_info.password freed at unmount */
+ if (volume_info.password) {
+ pSesInfo->password = volume_info.password;
+ /* set to NULL to prevent freeing on exit */
+ volume_info.password = NULL;
+ }
+ if (volume_info.username)
+ strncpy(pSesInfo->userName, volume_info.username,
+ MAX_USERNAME_SIZE);
+ if (volume_info.domainname) {
+ int len = strlen(volume_info.domainname);
+ pSesInfo->domainName = kmalloc(len + 1, GFP_KERNEL);
+ if (pSesInfo->domainName)
+ strcpy(pSesInfo->domainName,
+ volume_info.domainname);
+ }
+ pSesInfo->linux_uid = volume_info.linux_uid;
+ pSesInfo->overrideSecFlg = volume_info.secFlg;
+ down(&pSesInfo->sesSem);
- if (!rc) {
- /* volume_info.password freed at unmount */
- if (volume_info.password) {
- pSesInfo->password = volume_info.password;
- /* set to NULL to prevent freeing on exit */
- volume_info.password = NULL;
- }
- if (volume_info.username)
- strncpy(pSesInfo->userName,
- volume_info.username,
- MAX_USERNAME_SIZE);
- if (volume_info.domainname) {
- int len = strlen(volume_info.domainname);
- pSesInfo->domainName =
- kmalloc(len + 1, GFP_KERNEL);
- if (pSesInfo->domainName)
- strcpy(pSesInfo->domainName,
- volume_info.domainname);
- }
- pSesInfo->linux_uid = volume_info.linux_uid;
- pSesInfo->overrideSecFlg = volume_info.secFlg;
- down(&pSesInfo->sesSem);
- /* BB FIXME need to pass vol->secFlgs BB */
- rc = cifs_setup_session(xid, pSesInfo,
- cifs_sb->local_nls);
- up(&pSesInfo->sesSem);
- if (!rc)
- atomic_inc(&srvTcp->socketUseCount);
- }
+ /* BB FIXME need to pass vol->secFlgs BB */
+ rc = cifs_setup_session(xid, pSesInfo,
+ cifs_sb->local_nls);
+ up(&pSesInfo->sesSem);
}
/* search for existing tcon to this server share */
if (!rc) {
- if (volume_info.rsize > CIFSMaxBufSize) {
- cERROR(1, ("rsize %d too large, using MaxBufSize",
- volume_info.rsize));
- cifs_sb->rsize = CIFSMaxBufSize;
- } else if ((volume_info.rsize) &&
- (volume_info.rsize <= CIFSMaxBufSize))
- cifs_sb->rsize = volume_info.rsize;
- else /* default */
- cifs_sb->rsize = CIFSMaxBufSize;
-
- if (volume_info.wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) {
- cERROR(1, ("wsize %d too large, using 4096 instead",
- volume_info.wsize));
- cifs_sb->wsize = 4096;
- } else if (volume_info.wsize)
- cifs_sb->wsize = volume_info.wsize;
- else
- cifs_sb->wsize =
- min_t(const int, PAGEVEC_SIZE * PAGE_CACHE_SIZE,
- 127*1024);
- /* old default of CIFSMaxBufSize was too small now
- that SMB Write2 can send multiple pages in kvec.
- RFC1001 does not describe what happens when frame
- bigger than 128K is sent so use that as max in
- conjunction with 52K kvec constraint on arch with 4K
- page size */
-
- if (cifs_sb->rsize < 2048) {
- cifs_sb->rsize = 2048;
- /* Windows ME may prefer this */
- cFYI(1, ("readsize set to minimum: 2048"));
- }
- /* calculate prepath */
- cifs_sb->prepath = volume_info.prepath;
- if (cifs_sb->prepath) {
- cifs_sb->prepathlen = strlen(cifs_sb->prepath);
- /* we can not convert the / to \ in the path
- separators in the prefixpath yet because we do not
- know (until reset_cifs_unix_caps is called later)
- whether POSIX PATH CAP is available. We normalize
- the / to \ after reset_cifs_unix_caps is called */
- volume_info.prepath = NULL;
- } else
- cifs_sb->prepathlen = 0;
- cifs_sb->mnt_uid = volume_info.linux_uid;
- cifs_sb->mnt_gid = volume_info.linux_gid;
- cifs_sb->mnt_file_mode = volume_info.file_mode;
- cifs_sb->mnt_dir_mode = volume_info.dir_mode;
- cFYI(1, ("file mode: 0x%x dir mode: 0x%x",
- cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode));
-
- if (volume_info.noperm)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
- if (volume_info.setuids)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID;
- if (volume_info.server_ino)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM;
- if (volume_info.remap)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR;
- if (volume_info.no_xattr)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR;
- if (volume_info.sfu_emul)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL;
- if (volume_info.nobrl)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL;
- if (volume_info.cifs_acl)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL;
- if (volume_info.override_uid)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
- if (volume_info.override_gid)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
- if (volume_info.dynperm)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
- if (volume_info.direct_io) {
- cFYI(1, ("mounting share using direct i/o"));
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
- }
+ setup_cifs_sb(&volume_info, cifs_sb);
- if ((volume_info.cifs_acl) && (volume_info.dynperm))
- cERROR(1, ("mount option dynperm ignored if cifsacl "
- "mount option supported"));
-
- tcon =
- find_unc(sin_server.sin_addr.s_addr, volume_info.UNC,
- volume_info.username);
+ tcon = cifs_find_tcon(pSesInfo, volume_info.UNC);
if (tcon) {
cFYI(1, ("Found match on UNC path"));
- /* we can have only one retry value for a connection
- to a share so for resources mounted more than once
- to the same server share the last value passed in
- for the retry flag is used */
- tcon->retry = volume_info.retry;
- tcon->nocase = volume_info.nocase;
- tcon->local_lease = volume_info.local_lease;
+ /* existing tcon already has a reference */
+ cifs_put_smb_ses(pSesInfo);
if (tcon->seal != volume_info.seal)
cERROR(1, ("transport encryption setting "
"conflicts with existing tid"));
} else {
tcon = tconInfoAlloc();
- if (tcon == NULL)
+ if (tcon == NULL) {
rc = -ENOMEM;
- else {
- /* check for null share name ie connecting to
- * dfs root */
-
- /* BB check if this works for exactly length
- * three strings */
- if ((strchr(volume_info.UNC + 3, '\\') == NULL)
- && (strchr(volume_info.UNC + 3, '/') ==
- NULL)) {
-/* rc = connect_to_dfs_path(xid, pSesInfo,
- "", cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);*/
- cFYI(1, ("DFS root not supported"));
- rc = -ENODEV;
- goto out;
- } else {
- /* BB Do we need to wrap sesSem around
- * this TCon call and Unix SetFS as
- * we do on SessSetup and reconnect? */
- rc = CIFSTCon(xid, pSesInfo,
- volume_info.UNC,
- tcon, cifs_sb->local_nls);
- cFYI(1, ("CIFS Tcon rc = %d", rc));
- if (volume_info.nodfs) {
- tcon->Flags &=
- ~SMB_SHARE_IS_IN_DFS;
- cFYI(1, ("DFS disabled (%d)",
- tcon->Flags));
- }
- }
- if (!rc) {
- atomic_inc(&pSesInfo->inUse);
- tcon->retry = volume_info.retry;
- tcon->nocase = volume_info.nocase;
- tcon->seal = volume_info.seal;
+ goto mount_fail_check;
+ }
+ tcon->ses = pSesInfo;
+
+ /* check for null share name ie connect to dfs root */
+ if ((strchr(volume_info.UNC + 3, '\\') == NULL)
+ && (strchr(volume_info.UNC + 3, '/') == NULL)) {
+ /* rc = connect_to_dfs_path(...) */
+ cFYI(1, ("DFS root not supported"));
+ rc = -ENODEV;
+ goto mount_fail_check;
+ } else {
+ /* BB Do we need to wrap sesSem around
+ * this TCon call and Unix SetFS as
+ * we do on SessSetup and reconnect? */
+ rc = CIFSTCon(xid, pSesInfo, volume_info.UNC,
+ tcon, cifs_sb->local_nls);
+ cFYI(1, ("CIFS Tcon rc = %d", rc));
+ if (volume_info.nodfs) {
+ tcon->Flags &= ~SMB_SHARE_IS_IN_DFS;
+ cFYI(1, ("DFS disabled (%d)",
+ tcon->Flags));
}
}
- }
+ if (rc)
+ goto mount_fail_check;
+ tcon->seal = volume_info.seal;
+ write_lock(&cifs_tcp_ses_lock);
+ list_add(&tcon->tcon_list, &pSesInfo->tcon_list);
+ write_unlock(&cifs_tcp_ses_lock);
+ }
+
+ /* we can have only one retry value for a connection
+ to a share so for resources mounted more than once
+ to the same server share the last value passed in
+ for the retry flag is used */
+ tcon->retry = volume_info.retry;
+ tcon->nocase = volume_info.nocase;
+ tcon->local_lease = volume_info.local_lease;
}
if (pSesInfo) {
if (pSesInfo->capabilities & CAP_LARGE_FILES) {
/* BB FIXME fix time_gran to be larger for LANMAN sessions */
sb->s_time_gran = 100;
-/* on error free sesinfo and tcon struct if needed */
+mount_fail_check:
+ /* on error free sesinfo and tcon struct if needed */
if (rc) {
- /* if session setup failed, use count is zero but
- we still need to free cifsd thread */
- if (atomic_read(&srvTcp->socketUseCount) == 0) {
- spin_lock(&GlobalMid_Lock);
- srvTcp->tcpStatus = CifsExiting;
- spin_unlock(&GlobalMid_Lock);
- kill_cifsd(srvTcp);
- }
- /* If find_unc succeeded then rc == 0 so we can not end */
- if (tcon) /* up accidently freeing someone elses tcon struct */
- tconInfoFree(tcon);
- if (existingCifsSes == NULL) {
- if (pSesInfo) {
- if ((pSesInfo->server) &&
- (pSesInfo->status == CifsGood)) {
- int temp_rc;
- temp_rc = CIFSSMBLogoff(xid, pSesInfo);
- /* if the socketUseCount is now zero */
- if ((temp_rc == -ESHUTDOWN) &&
- (pSesInfo->server))
- kill_cifsd(pSesInfo->server);
- } else {
- cFYI(1, ("No session or bad tcon"));
- if (pSesInfo->server) {
- spin_lock(&GlobalMid_Lock);
- srvTcp->tcpStatus = CifsExiting;
- spin_unlock(&GlobalMid_Lock);
- kill_cifsd(pSesInfo->server);
- }
- }
- sesInfoFree(pSesInfo);
- /* pSesInfo = NULL; */
- }
- }
- } else {
- atomic_inc(&tcon->useCount);
- cifs_sb->tcon = tcon;
- tcon->ses = pSesInfo;
-
- /* do not care if following two calls succeed - informational */
- if (!tcon->ipc) {
- CIFSSMBQFSDeviceInfo(xid, tcon);
- CIFSSMBQFSAttributeInfo(xid, tcon);
- }
-
- /* tell server which Unix caps we support */
- if (tcon->ses->capabilities & CAP_UNIX)
- /* reset of caps checks mount to see if unix extensions
- disabled for just this mount */
- reset_cifs_unix_caps(xid, tcon, sb, &volume_info);
+ /* If find_unc succeeded then rc == 0 so we can not end */
+ /* up accidently freeing someone elses tcon struct */
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
else
- tcon->unix_ext = 0; /* server does not support them */
+ cifs_put_tcp_session(srvTcp);
+ goto out;
+ }
+ cifs_sb->tcon = tcon;
- /* convert forward to back slashes in prepath here if needed */
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
- convert_delimiter(cifs_sb->prepath,
- CIFS_DIR_SEP(cifs_sb));
+ /* do not care if following two calls succeed - informational */
+ if (!tcon->ipc) {
+ CIFSSMBQFSDeviceInfo(xid, tcon);
+ CIFSSMBQFSAttributeInfo(xid, tcon);
+ }
- if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) {
- cifs_sb->rsize = 1024 * 127;
- cFYI(DBG2,
- ("no very large read support, rsize now 127K"));
- }
- if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X))
- cifs_sb->wsize = min(cifs_sb->wsize,
- (tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE));
- if (!(tcon->ses->capabilities & CAP_LARGE_READ_X))
- cifs_sb->rsize = min(cifs_sb->rsize,
- (tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE));
+ /* tell server which Unix caps we support */
+ if (tcon->ses->capabilities & CAP_UNIX)
+ /* reset of caps checks mount to see if unix extensions
+ disabled for just this mount */
+ reset_cifs_unix_caps(xid, tcon, sb, &volume_info);
+ else
+ tcon->unix_ext = 0; /* server does not support them */
+
+ /* convert forward to back slashes in prepath here if needed */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+ convert_delimiter(cifs_sb->prepath, CIFS_DIR_SEP(cifs_sb));
+
+ if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) {
+ cifs_sb->rsize = 1024 * 127;
+ cFYI(DBG2, ("no very large read support, rsize now 127K"));
}
+ if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X))
+ cifs_sb->wsize = min(cifs_sb->wsize,
+ (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
+ if (!(tcon->ses->capabilities & CAP_LARGE_READ_X))
+ cifs_sb->rsize = min(cifs_sb->rsize,
+ (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
/* volume_info.password is freed above when existing session found
(in which case it is not needed anymore) but when new sesion is created
/* above now done in SendReceive */
if ((rc == 0) && (tcon != NULL)) {
tcon->tidStatus = CifsGood;
+ tcon->need_reconnect = false;
tcon->tid = smb_buffer_response->Tid;
bcc_ptr = pByteArea(smb_buffer_response);
length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb)
{
int rc = 0;
- int xid;
- struct cifsSesInfo *ses = NULL;
char *tmp;
- xid = GetXid();
-
- if (cifs_sb->tcon) {
- ses = cifs_sb->tcon->ses; /* save ptr to ses before delete tcon!*/
- rc = CIFSSMBTDis(xid, cifs_sb->tcon);
- if (rc == -EBUSY) {
- FreeXid(xid);
- return 0;
- }
- DeleteTconOplockQEntries(cifs_sb->tcon);
- tconInfoFree(cifs_sb->tcon);
- if ((ses) && (ses->server)) {
- /* save off task so we do not refer to ses later */
- cFYI(1, ("About to do SMBLogoff "));
- rc = CIFSSMBLogoff(xid, ses);
- if (rc == -EBUSY) {
- FreeXid(xid);
- return 0;
- } else if (rc == -ESHUTDOWN) {
- cFYI(1, ("Waking up socket by sending signal"));
- if (ses->server)
- kill_cifsd(ses->server);
- rc = 0;
- } /* else - we have an smb session
- left on this socket do not kill cifsd */
- } else
- cFYI(1, ("No session or bad tcon"));
- }
+ if (cifs_sb->tcon)
+ cifs_put_tcon(cifs_sb->tcon);
cifs_sb->tcon = NULL;
tmp = cifs_sb->prepath;
cifs_sb->prepathlen = 0;
cifs_sb->prepath = NULL;
kfree(tmp);
- if (ses)
- sesInfoFree(ses);
- FreeXid(xid);
return rc;
}
cFYI(1, ("CIFS Session Established successfully"));
spin_lock(&GlobalMid_Lock);
pSesInfo->status = CifsGood;
+ pSesInfo->need_reconnect = false;
spin_unlock(&GlobalMid_Lock);
}
pTcon = cifs_sb->tcon;
if (pSMBFile) {
struct cifsLockInfo *li, *tmp;
-
+ write_lock(&GlobalSMBSeslock);
pSMBFile->closePend = true;
if (pTcon) {
/* no sense reconnecting to close a file that is
already closed */
- if (pTcon->tidStatus != CifsNeedReconnect) {
+ if (!pTcon->need_reconnect) {
+ write_unlock(&GlobalSMBSeslock);
timeout = 2;
while ((atomic_read(&pSMBFile->wrtPending) != 0)
&& (timeout <= 2048)) {
timeout *= 4;
}
if (atomic_read(&pSMBFile->wrtPending))
- cERROR(1,
- ("close with pending writes"));
- rc = CIFSSMBClose(xid, pTcon,
+ cERROR(1, ("close with pending write"));
+ if (!pTcon->need_reconnect &&
+ !pSMBFile->invalidHandle)
+ rc = CIFSSMBClose(xid, pTcon,
pSMBFile->netfid);
- }
- }
+ } else
+ write_unlock(&GlobalSMBSeslock);
+ } else
+ write_unlock(&GlobalSMBSeslock);
/* Delete any outstanding lock records.
We'll lose them when the file is closed anyway. */
pTcon = cifs_sb->tcon;
cFYI(1, ("Freeing private data in close dir"));
+ write_lock(&GlobalSMBSeslock);
if (!pCFileStruct->srch_inf.endOfSearch &&
!pCFileStruct->invalidHandle) {
pCFileStruct->invalidHandle = true;
+ write_unlock(&GlobalSMBSeslock);
rc = CIFSFindClose(xid, pTcon, pCFileStruct->netfid);
cFYI(1, ("Closing uncompleted readdir with rc %d",
rc));
/* not much we can do if it fails anyway, ignore rc */
rc = 0;
- }
+ } else
+ write_unlock(&GlobalSMBSeslock);
ptmp = pCFileStruct->srch_inf.ntwrk_buf_start;
if (ptmp) {
cFYI(1, ("closedir free smb buf in srch struct"));
if ((wbc->nr_to_write -= n_iov) <= 0)
done = 1;
index = next;
- }
+ } else
+ /* Need to re-find the pages we skipped */
+ index = pvec.pages[0]->index + 1;
+
pagevec_release(&pvec);
}
if (!scanned && !done) {
cFYI(1, ("write_end for page %p from pos %lld with %d bytes",
page, pos, copied));
- if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
+ if (PageChecked(page)) {
+ if (copied == len)
+ SetPageUptodate(page);
+ ClearPageChecked(page);
+ } else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
SetPageUptodate(page);
if (!PageUptodate(page)) {
{
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
loff_t offset = pos & (PAGE_CACHE_SIZE - 1);
+ loff_t page_start = pos & PAGE_MASK;
+ loff_t i_size;
+ struct page *page;
+ int rc = 0;
cFYI(1, ("write_begin from %lld len %d", (long long)pos, len));
- *pagep = __grab_cache_page(mapping, index);
- if (!*pagep)
- return -ENOMEM;
-
- if (PageUptodate(*pagep))
- return 0;
+ page = __grab_cache_page(mapping, index);
+ if (!page) {
+ rc = -ENOMEM;
+ goto out;
+ }
- /* If we are writing a full page it will be up to date,
- no need to read from the server */
- if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE)
- return 0;
+ if (PageUptodate(page))
+ goto out;
- if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
- int rc;
+ /*
+ * If we write a full page it will be up to date, no need to read from
+ * the server. If the write is short, we'll end up doing a sync write
+ * instead.
+ */
+ if (len == PAGE_CACHE_SIZE)
+ goto out;
- /* might as well read a page, it is fast enough */
- rc = cifs_readpage_worker(file, *pagep, &offset);
+ /*
+ * optimize away the read when we have an oplock, and we're not
+ * expecting to use any of the data we'd be reading in. That
+ * is, when the page lies beyond the EOF, or straddles the EOF
+ * and the write will cover all of the existing data.
+ */
+ if (CIFS_I(mapping->host)->clientCanCacheRead) {
+ i_size = i_size_read(mapping->host);
+ if (page_start >= i_size ||
+ (offset == 0 && (pos + len) >= i_size)) {
+ zero_user_segments(page, 0, offset,
+ offset + len,
+ PAGE_CACHE_SIZE);
+ /*
+ * PageChecked means that the parts of the page
+ * to which we're not writing are considered up
+ * to date. Once the data is copied to the
+ * page, it can be set uptodate.
+ */
+ SetPageChecked(page);
+ goto out;
+ }
+ }
- /* we do not need to pass errors back
- e.g. if we do not have read access to the file
- because cifs_write_end will attempt synchronous writes
- -- shaggy */
+ if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
+ /*
+ * might as well read a page, it is fast enough. If we get
+ * an error, we don't need to return it. cifs_write_end will
+ * do a sync write instead since PG_uptodate isn't set.
+ */
+ cifs_readpage_worker(file, page, &page_start);
} else {
/* we could try using another file handle if there is one -
but how would we lock it to prevent close of that handle
racing with this read? In any case
this will be written out by write_end so is fine */
}
-
- return 0;
+out:
+ *pagep = page;
+ return rc;
}
const struct address_space_operations cifs_addr_ops = {
ret_buf = kzalloc(sizeof(struct cifsSesInfo), GFP_KERNEL);
if (ret_buf) {
- write_lock(&GlobalSMBSeslock);
atomic_inc(&sesInfoAllocCount);
ret_buf->status = CifsNew;
- list_add(&ret_buf->cifsSessionList, &GlobalSMBSessionList);
+ ++ret_buf->ses_count;
+ INIT_LIST_HEAD(&ret_buf->smb_ses_list);
+ INIT_LIST_HEAD(&ret_buf->tcon_list);
init_MUTEX(&ret_buf->sesSem);
- write_unlock(&GlobalSMBSeslock);
}
return ret_buf;
}
return;
}
- write_lock(&GlobalSMBSeslock);
atomic_dec(&sesInfoAllocCount);
- list_del(&buf_to_free->cifsSessionList);
- write_unlock(&GlobalSMBSeslock);
kfree(buf_to_free->serverOS);
kfree(buf_to_free->serverDomain);
kfree(buf_to_free->serverNOS);
struct cifsTconInfo *ret_buf;
ret_buf = kzalloc(sizeof(struct cifsTconInfo), GFP_KERNEL);
if (ret_buf) {
- write_lock(&GlobalSMBSeslock);
atomic_inc(&tconInfoAllocCount);
- list_add(&ret_buf->cifsConnectionList,
- &GlobalTreeConnectionList);
ret_buf->tidStatus = CifsNew;
+ ++ret_buf->tc_count;
INIT_LIST_HEAD(&ret_buf->openFileList);
- init_MUTEX(&ret_buf->tconSem);
+ INIT_LIST_HEAD(&ret_buf->tcon_list);
#ifdef CONFIG_CIFS_STATS
spin_lock_init(&ret_buf->stat_lock);
#endif
- write_unlock(&GlobalSMBSeslock);
}
return ret_buf;
}
cFYI(1, ("Null buffer passed to tconInfoFree"));
return;
}
- write_lock(&GlobalSMBSeslock);
atomic_dec(&tconInfoAllocCount);
- list_del(&buf_to_free->cifsConnectionList);
- write_unlock(&GlobalSMBSeslock);
kfree(buf_to_free->nativeFileSystem);
kfree(buf_to_free);
}
if (current->fsuid != treeCon->ses->linux_uid) {
cFYI(1, ("Multiuser mode and UID "
"did not match tcon uid"));
- read_lock(&GlobalSMBSeslock);
- list_for_each(temp_item, &GlobalSMBSessionList) {
- ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList);
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) {
+ ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list);
if (ses->linux_uid == current->fsuid) {
if (ses->server == treeCon->ses->server) {
cFYI(1, ("found matching uid substitute right smb_uid"));
}
}
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
}
}
}
is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
{
struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf;
- struct list_head *tmp;
- struct list_head *tmp1;
+ struct list_head *tmp, *tmp1, *tmp2;
+ struct cifsSesInfo *ses;
struct cifsTconInfo *tcon;
+ struct cifsInodeInfo *pCifsInode;
struct cifsFileInfo *netfile;
cFYI(1, ("Checking for oplock break or dnotify response"));
return false;
/* look up tcon based on tid & uid */
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &GlobalTreeConnectionList) {
- tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- if ((tcon->tid == buf->Tid) && (srv == tcon->ses->server)) {
+ read_lock(&cifs_tcp_ses_lock);
+ list_for_each(tmp, &srv->smb_ses_list) {
+ ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list);
+ list_for_each(tmp1, &ses->tcon_list) {
+ tcon = list_entry(tmp1, struct cifsTconInfo, tcon_list);
+ if (tcon->tid != buf->Tid)
+ continue;
+
cifs_stats_inc(&tcon->num_oplock_brks);
- list_for_each(tmp1, &tcon->openFileList) {
- netfile = list_entry(tmp1, struct cifsFileInfo,
+ write_lock(&GlobalSMBSeslock);
+ list_for_each(tmp2, &tcon->openFileList) {
+ netfile = list_entry(tmp2, struct cifsFileInfo,
tlist);
- if (pSMB->Fid == netfile->netfid) {
- struct cifsInodeInfo *pCifsInode;
- read_unlock(&GlobalSMBSeslock);
- cFYI(1,
- ("file id match, oplock break"));
- pCifsInode =
- CIFS_I(netfile->pInode);
- pCifsInode->clientCanCacheAll = false;
- if (pSMB->OplockLevel == 0)
- pCifsInode->clientCanCacheRead
- = false;
- pCifsInode->oplockPending = true;
- AllocOplockQEntry(netfile->pInode,
- netfile->netfid,
- tcon);
- cFYI(1,
- ("about to wake up oplock thread"));
- if (oplockThread)
- wake_up_process(oplockThread);
- return true;
- }
+ if (pSMB->Fid != netfile->netfid)
+ continue;
+
+ write_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
+ cFYI(1, ("file id match, oplock break"));
+ pCifsInode = CIFS_I(netfile->pInode);
+ pCifsInode->clientCanCacheAll = false;
+ if (pSMB->OplockLevel == 0)
+ pCifsInode->clientCanCacheRead = false;
+ pCifsInode->oplockPending = true;
+ AllocOplockQEntry(netfile->pInode,
+ netfile->netfid, tcon);
+ cFYI(1, ("about to wake up oplock thread"));
+ if (oplockThread)
+ wake_up_process(oplockThread);
+
+ return true;
}
- read_unlock(&GlobalSMBSeslock);
+ write_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
cFYI(1, ("No matching file for oplock break"));
return true;
}
}
- read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
cFYI(1, ("Can not process oplock break for non-existent connection"));
return true;
}
(index_to_find < first_entry_in_buffer)) {
/* close and restart search */
cFYI(1, ("search backing up - close and restart search"));
+ write_lock(&GlobalSMBSeslock);
if (!cifsFile->srch_inf.endOfSearch &&
!cifsFile->invalidHandle) {
cifsFile->invalidHandle = true;
+ write_unlock(&GlobalSMBSeslock);
CIFSFindClose(xid, pTcon, cifsFile->netfid);
- }
+ } else
+ write_unlock(&GlobalSMBSeslock);
if (cifsFile->srch_inf.ntwrk_buf_start) {
cFYI(1, ("freeing SMB ff cache buf on search rewind"));
if (cifsFile->srch_inf.smallBuf)
decrypt_passphrase_encrypted_session_key(struct ecryptfs_auth_tok *auth_tok,
struct ecryptfs_crypt_stat *crypt_stat)
{
- struct scatterlist dst_sg;
- struct scatterlist src_sg;
+ struct scatterlist dst_sg[2];
+ struct scatterlist src_sg[2];
struct mutex *tfm_mutex;
struct blkcipher_desc desc = {
.flags = CRYPTO_TFM_REQ_MAY_SLEEP
};
int rc = 0;
- sg_init_table(&dst_sg, 1);
- sg_init_table(&src_sg, 1);
-
if (unlikely(ecryptfs_verbosity > 0)) {
ecryptfs_printk(
KERN_DEBUG, "Session key encryption key (size [%d]):\n",
}
rc = virt_to_scatterlist(auth_tok->session_key.encrypted_key,
auth_tok->session_key.encrypted_key_size,
- &src_sg, 1);
- if (rc != 1) {
+ src_sg, 2);
+ if (rc < 1 || rc > 2) {
printk(KERN_ERR "Internal error whilst attempting to convert "
"auth_tok->session_key.encrypted_key to scatterlist; "
"expected rc = 1; got rc = [%d]. "
auth_tok->session_key.encrypted_key_size;
rc = virt_to_scatterlist(auth_tok->session_key.decrypted_key,
auth_tok->session_key.decrypted_key_size,
- &dst_sg, 1);
- if (rc != 1) {
+ dst_sg, 2);
+ if (rc < 1 || rc > 2) {
printk(KERN_ERR "Internal error whilst attempting to convert "
"auth_tok->session_key.decrypted_key to scatterlist; "
"expected rc = 1; got rc = [%d]\n", rc);
rc = -EINVAL;
goto out;
}
- rc = crypto_blkcipher_decrypt(&desc, &dst_sg, &src_sg,
+ rc = crypto_blkcipher_decrypt(&desc, dst_sg, src_sg,
auth_tok->session_key.encrypted_key_size);
mutex_unlock(tfm_mutex);
if (unlikely(rc)) {
size_t i;
size_t encrypted_session_key_valid = 0;
char session_key_encryption_key[ECRYPTFS_MAX_KEY_BYTES];
- struct scatterlist dst_sg;
- struct scatterlist src_sg;
+ struct scatterlist dst_sg[2];
+ struct scatterlist src_sg[2];
struct mutex *tfm_mutex = NULL;
u8 cipher_code;
size_t packet_size_length;
ecryptfs_dump_hex(session_key_encryption_key, 16);
}
rc = virt_to_scatterlist(crypt_stat->key, key_rec->enc_key_size,
- &src_sg, 1);
- if (rc != 1) {
+ src_sg, 2);
+ if (rc < 1 || rc > 2) {
ecryptfs_printk(KERN_ERR, "Error generating scatterlist "
"for crypt_stat session key; expected rc = 1; "
"got rc = [%d]. key_rec->enc_key_size = [%d]\n",
goto out;
}
rc = virt_to_scatterlist(key_rec->enc_key, key_rec->enc_key_size,
- &dst_sg, 1);
- if (rc != 1) {
+ dst_sg, 2);
+ if (rc < 1 || rc > 2) {
ecryptfs_printk(KERN_ERR, "Error generating scatterlist "
"for crypt_stat encrypted session key; "
"expected rc = 1; got rc = [%d]. "
rc = 0;
ecryptfs_printk(KERN_DEBUG, "Encrypting [%d] bytes of the key\n",
crypt_stat->key_size);
- rc = crypto_blkcipher_encrypt(&desc, &dst_sg, &src_sg,
+ rc = crypto_blkcipher_encrypt(&desc, dst_sg, src_sg,
(*key_rec).enc_key_size);
mutex_unlock(tfm_mutex);
if (rc) {
#define EP_UNACTIVE_PTR ((void *) -1L)
+#define EP_ITEM_COST (sizeof(struct epitem) + sizeof(struct eppoll_entry))
+
struct epoll_filefd {
struct file *file;
int fd;
* holding ->lock.
*/
struct epitem *ovflist;
+
+ /* The user that created the eventpoll descriptor */
+ struct user_struct *user;
};
/* Wait structure used by the poll hooks */
struct epitem *epi;
};
+/*
+ * Configuration options available inside /proc/sys/fs/epoll/
+ */
+/* Maximum number of epoll devices, per user */
+static int max_user_instances __read_mostly;
+/* Maximum number of epoll watched descriptors, per user */
+static int max_user_watches __read_mostly;
+
/*
* This mutex is used to serialize ep_free() and eventpoll_release_file().
*/
-static struct mutex epmutex;
+static DEFINE_MUTEX(epmutex);
/* Safe wake up implementation */
static struct poll_safewake psw;
/* Slab cache used to allocate "struct eppoll_entry" */
static struct kmem_cache *pwq_cache __read_mostly;
+#ifdef CONFIG_SYSCTL
+
+#include <linux/sysctl.h>
+
+static int zero;
+
+ctl_table epoll_table[] = {
+ {
+ .procname = "max_user_instances",
+ .data = &max_user_instances,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ {
+ .procname = "max_user_watches",
+ .data = &max_user_watches,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ { .ctl_name = 0 }
+};
+#endif /* CONFIG_SYSCTL */
+
/* Setup the structure that is used as key for the RB tree */
static inline void ep_set_ffd(struct epoll_filefd *ffd,
/* At this point it is safe to free the eventpoll item */
kmem_cache_free(epi_cache, epi);
+ atomic_dec(&ep->user->epoll_watches);
+
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n",
current, ep, file));
mutex_unlock(&epmutex);
mutex_destroy(&ep->mtx);
+ atomic_dec(&ep->user->epoll_devs);
+ free_uid(ep->user);
kfree(ep);
}
static int ep_alloc(struct eventpoll **pep)
{
- struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ int error;
+ struct user_struct *user;
+ struct eventpoll *ep;
- if (!ep)
- return -ENOMEM;
+ user = get_current_user();
+ error = -EMFILE;
+ if (unlikely(atomic_read(&user->epoll_devs) >=
+ max_user_instances))
+ goto free_uid;
+ error = -ENOMEM;
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (unlikely(!ep))
+ goto free_uid;
spin_lock_init(&ep->lock);
mutex_init(&ep->mtx);
INIT_LIST_HEAD(&ep->rdllist);
ep->rbr = RB_ROOT;
ep->ovflist = EP_UNACTIVE_PTR;
+ ep->user = user;
*pep = ep;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
current, ep));
return 0;
+
+free_uid:
+ free_uid(user);
+ return error;
}
/*
struct epitem *epi;
struct ep_pqueue epq;
- error = -ENOMEM;
+ if (unlikely(atomic_read(&ep->user->epoll_watches) >=
+ max_user_watches))
+ return -ENOSPC;
if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
- goto error_return;
+ return -ENOMEM;
/* Item initialization follow here ... */
INIT_LIST_HEAD(&epi->rdllink);
* install process. Namely an allocation for a wait queue failed due
* high memory pressure.
*/
+ error = -ENOMEM;
if (epi->nwait < 0)
goto error_unregister;
spin_unlock_irqrestore(&ep->lock, flags);
+ atomic_inc(&ep->user->epoll_watches);
+
/* We have to call this outside the lock */
if (pwake)
ep_poll_safewake(&psw, &ep->poll_wait);
spin_unlock_irqrestore(&ep->lock, flags);
kmem_cache_free(epi_cache, epi);
-error_return:
+
return error;
}
flags & O_CLOEXEC);
if (fd < 0)
ep_free(ep);
+ atomic_inc(&ep->user->epoll_devs);
error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
static int __init eventpoll_init(void)
{
- mutex_init(&epmutex);
+ struct sysinfo si;
+
+ si_meminfo(&si);
+ max_user_instances = 128;
+ max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+ EP_ITEM_COST;
/* Initialize the structure used to perform safe poll wait head wake ups */
ep_poll_safewake_init(&psw);
extern int do_mknod(const char *file, int mode, unsigned int major,
unsigned int minor);
extern int link_file(const char *from, const char *to);
-extern int do_readlink(char *file, char *buf, int size);
+extern int hostfs_do_readlink(char *file, char *buf, int size);
extern int rename_file(char *from, char *to);
extern int do_statfs(char *root, long *bsize_out, long long *blocks_out,
long long *bfree_out, long long *bavail_out,
if (name == NULL)
goto out;
- n = do_readlink(link, name, len);
+ n = hostfs_do_readlink(link, name, len);
if (n < len)
break;
len *= 2;
name = inode_name(page->mapping->host, 0);
if (name == NULL)
return -ENOMEM;
- err = do_readlink(name, buffer, PAGE_CACHE_SIZE);
+ err = hostfs_do_readlink(name, buffer, PAGE_CACHE_SIZE);
kfree(name);
if (err == PAGE_CACHE_SIZE)
err = -E2BIG;
return 0;
}
-int do_readlink(char *file, char *buf, int size)
+int hostfs_do_readlink(char *file, char *buf, int size)
{
int n;
if (IS_APPEND(dir))
return -EPERM;
if (check_sticky(dir, victim->d_inode)||IS_APPEND(victim->d_inode)||
- IS_IMMUTABLE(victim->d_inode))
+ IS_IMMUTABLE(victim->d_inode) || IS_SWAPFILE(victim->d_inode))
return -EPERM;
if (isdir) {
if (!S_ISDIR(victim->d_inode->i_mode))
extern int debug_msgs;
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+extern void __ntfs_debug(const char *file, int line, const char *function,
+ const char *format, ...) __attribute__ ((format (printf, 4, 5)));
/**
* ntfs_debug - write a debug level message to syslog
* @f: a printf format string containing the message
* ntfs_debug() writes a DEBUG level message to the syslog but only if the
* driver was compiled with -DDEBUG. Otherwise, the call turns into a NOP.
*/
-static void ntfs_debug(const char *f, ...);
-#endif
-
-extern void __ntfs_debug (const char *file, int line, const char *function,
- const char *format, ...) __attribute__ ((format (printf, 4, 5)));
#define ntfs_debug(f, a...) \
__ntfs_debug(__FILE__, __LINE__, __func__, f, ##a)
bh = bhs[i];
if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
+ mlog(ML_BH_IO,
"trying to sync read a jbd "
"managed bh (blocknr = %llu), skipping\n",
(unsigned long long)bh->b_blocknr);
for (i = nr; i > 0; i--) {
bh = bhs[i - 1];
- if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
- "the journal got the buffer while it was "
- "locked for io! (blocknr = %llu)\n",
- (unsigned long long)bh->b_blocknr);
- BUG();
- }
+ /* No need to wait on the buffer if it's managed by JBD. */
+ if (!buffer_jbd(bh))
+ wait_on_buffer(bh);
- wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
/* Status won't be cleared from here on out,
* so we can safely record this and loop back
ignore_cache = 1;
}
- /* XXX: Can we ever get this and *not* have the cached
- * flag set? */
if (buffer_jbd(bh)) {
if (ignore_cache)
mlog(ML_BH_IO, "trying to sync read a jbd "
0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
dlmfs_init_once);
- if (!dlmfs_inode_cache)
+ if (!dlmfs_inode_cache) {
+ status = -ENOMEM;
goto bail;
+ }
cleanup_inode = 1;
user_dlm_worker = create_singlethread_workqueue("user_dlm");
#include <linux/workqueue.h>
/* user_lock_res->l_flags flags. */
-#define USER_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define USER_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define USER_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
lockres->l_unlock_action = OCFS2_UNLOCK_INVALID;
- spin_unlock_irqrestore(&lockres->l_lock, flags);
-
wake_up(&lockres->l_event);
+ spin_unlock_irqrestore(&lockres->l_lock, flags);
mlog_exit_void();
}
};
/* ocfs2_lock_res->l_flags flags. */
-#define OCFS2_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define OCFS2_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define OCFS2_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
+ if (!lksb->lksb_fsdlm.sb_lvbptr)
+ lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb +
+ sizeof(struct dlm_lksb);
return (void *)(lksb->lksb_fsdlm.sb_lvbptr);
}
static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH,
whole_disk_show, NULL);
-int add_partition(struct gendisk *disk, int partno,
- sector_t start, sector_t len, int flags)
+struct hd_struct *add_partition(struct gendisk *disk, int partno,
+ sector_t start, sector_t len, int flags)
{
struct hd_struct *p;
dev_t devt = MKDEV(0, 0);
err = disk_expand_part_tbl(disk, partno);
if (err)
- return err;
+ return ERR_PTR(err);
ptbl = disk->part_tbl;
if (ptbl->part[partno])
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
- return -ENOMEM;
+ return ERR_PTR(-EBUSY);
if (!init_part_stats(p)) {
err = -ENOMEM;
err = blk_alloc_devt(p, &devt);
if (err)
- goto out_free;
+ goto out_free_stats;
pdev->devt = devt;
/* delay uevent until 'holders' subdir is created */
if (!ddev->uevent_suppress)
kobject_uevent(&pdev->kobj, KOBJ_ADD);
- return 0;
+ return p;
+out_free_stats:
+ free_part_stats(p);
out_free:
kfree(p);
- return err;
+ return ERR_PTR(err);
out_del:
kobject_put(p->holder_dir);
device_del(pdev);
out_put:
put_device(pdev);
blk_free_devt(devt);
- return err;
+ return ERR_PTR(err);
}
/* Not exported, helper to add_disk(). */
disk->disk_name, p, (unsigned long long) size);
size = get_capacity(disk) - from;
}
- res = add_partition(disk, p, from, size, state->parts[p].flags);
- if (res) {
- printk(KERN_ERR " %s: p%d could not be added: %d\n",
- disk->disk_name, p, -res);
+ part = add_partition(disk, p, from, size,
+ state->parts[p].flags);
+ if (IS_ERR(part)) {
+ printk(KERN_ERR " %s: p%d could not be added: %ld\n",
+ disk->disk_name, p, -PTR_ERR(part));
continue;
}
#ifdef CONFIG_BLK_DEV_MD
if (state->parts[p].flags & ADDPART_FLAG_RAID)
- md_autodetect_dev(bdev->bd_dev+p);
+ md_autodetect_dev(part_to_dev(part)->devt);
#endif
}
kfree(state);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
inode->i_flags |= S_PRIVATE; /* tell selinux to ignore this inode */
inode->i_mode = table->mode;
+ inode->i_uid = inode->i_gid = 0;
if (!table->child) {
inode->i_mode |= S_IFREG;
inode->i_op = &proc_sys_inode_operations;
udf_truncate_tail_extent(inode);
unlock_kernel();
write_inode_now(inode, 0);
+ invalidate_inode_buffers(inode);
}
iinfo = UDF_I(inode);
kfree(iinfo->i_ext.i_data);
{.info = {"_BFS", 1, 0}},
{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
9,
- ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */
+ ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
{.info = {"_BLT", 3, 0}},
{.info = {"_BMC", 1, 0}},
{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+ {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
{.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
};
extern void drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
/* Modesetting support */
extern int drm_modeset_ctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */
/*
* epoll (fs/eventpoll.c) compat bits follow ...
return current->flags & PF_SPREAD_SLAB;
}
-extern void cpuset_track_online_nodes(void);
-
extern int current_cpuset_is_being_rebound(void);
extern void rebuild_sched_domains(void);
return 0;
}
-static inline void cpuset_track_online_nodes(void) {}
-
static inline int current_cpuset_is_being_rebound(void)
{
return 0;
extern int disk_expand_part_tbl(struct gendisk *disk, int target);
extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
-extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int);
+extern struct hd_struct * __must_check add_partition(struct gendisk *disk,
+ int partno, sector_t start,
+ sector_t len, int flags);
extern void delete_partition(struct gendisk *, int);
extern void printk_all_partitions(void);
#endif /* CONFIG_HIGHMEM */
/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
{
void *addr = kmap_atomic(page, KM_USER0);
clear_user_page(addr, vaddr, page);
kunmap_atomic(addr, KM_USER0);
}
+#endif
#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
/**
unsigned long bitmap; /* A zero bit means "space here" */
struct idr_layer *ary[1<<IDR_BITS];
int count; /* When zero, we can release it */
+ int layer; /* distance from leaf */
struct rcu_head rcu_head;
};
struct idr {
struct idr_layer *top;
struct idr_layer *id_free;
- int layers;
+ int layers; /* only valid without concurrent changes */
int id_free_cnt;
spinlock_t lock;
};
#define KEY_KPEQUAL 117
#define KEY_KPPLUSMINUS 118
#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
#define KEY_KPCOMMA 121
#define KEY_HANGEUL 122
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
-#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
/**
* struct irq_desc - interrupt descriptor
- *
+ * @irq: interrupt number for this descriptor
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
* @cpu: cpu index useful for balancing
* @pending_mask: pending rebalanced interrupts
* @dir: /proc/irq/ procfs entry
- * @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
#ifdef CONFIG_GENERIC_PENDING_IRQ
-void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
void move_masked_irq(int irq);
{
}
-static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-}
-
#endif /* CONFIG_GENERIC_PENDING_IRQ */
#else /* CONFIG_SMP */
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
+ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
# define lock_set_subclass(l, s, i) do { } while (0)
# define lockdep_init() do { } while (0)
# define lockdep_info() do { } while (0)
-# define lockdep_init_map(lock, name, key, sub) do { (void)(key); } while (0)
+# define lockdep_init_map(lock, name, key, sub) \
+ do { (void)(name); (void)(key); } while (0)
# define lockdep_set_class(lock, key) do { (void)(key); } while (0)
# define lockdep_set_class_and_name(lock, key, name) \
- do { (void)(key); } while (0)
+ do { (void)(key); (void)(name); } while (0)
#define lockdep_set_class_and_subclass(lock, key, sub) \
do { (void)(key); } while (0)
#define lockdep_set_subclass(lock, sub) do { } while (0)
#ifdef CONFIG_MEMORY_HOTPLUG
#define hotplug_memory_notifier(fn, pri) { \
- static struct notifier_block fn##_mem_nb = \
+ static __meminitdata struct notifier_block fn##_mem_nb =\
{ .notifier_call = fn, .priority = pri }; \
register_memory_notifier(&fn##_mem_nb); \
}
int num_ports;
int vl_cap[MLX4_MAX_PORTS + 1];
int ib_mtu_cap[MLX4_MAX_PORTS + 1];
+ __be32 ib_port_def_cap[MLX4_MAX_PORTS + 1];
u64 def_mac[MLX4_MAX_PORTS + 1];
int eth_mtu_cap[MLX4_MAX_PORTS + 1];
int gid_table_len[MLX4_MAX_PORTS + 1];
#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */
#define SYS_SENDMSG 16 /* sys_sendmsg(2) */
#define SYS_RECVMSG 17 /* sys_recvmsg(2) */
-#define SYS_PACCEPT 18 /* sys_paccept(2) */
+#define SYS_ACCEPT4 18 /* sys_accept4(2) */
typedef enum {
SS_FREE = 0, /* not allocated */
* remaining bits are used as flags. */
#define SOCK_TYPE_MASK 0xf
-/* Flags for socket, socketpair, paccept */
+/* Flags for socket, socketpair, accept4 */
#define SOCK_CLOEXEC O_CLOEXEC
#ifndef SOCK_NONBLOCK
#define SOCK_NONBLOCK O_NONBLOCK
extern struct socket *sockfd_lookup(int fd, int *err);
#define sockfd_put(sock) fput(sock->file)
extern int net_ratelimit(void);
-extern long do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen, int flags);
#define net_random() random32()
#define net_srandom(seed) srandom32((__force u32)seed)
struct list_head lru; /* per cgroup LRU list */
};
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
void __init page_cgroup_init(void);
struct page_cgroup *lookup_page_cgroup(struct page *page);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
}
u64 ring_buffer_time_stamp(int cpu);
void ring_buffer_normalize_time_stamp(int cpu, u64 *ts);
+void tracing_on(void);
+void tracing_off(void);
+
enum ring_buffer_flags {
RB_FL_OVERWRITE = 1 << 0,
};
atomic_t inotify_watches; /* How many inotify watches does this user have? */
atomic_t inotify_devs; /* How many inotify devs does this user have opened? */
#endif
+#ifdef CONFIG_EPOLL
+ atomic_t epoll_devs; /* The number of epoll descriptors currently open */
+ atomic_t epoll_watches; /* The number of file descriptors currently watched */
+#endif
#ifdef CONFIG_POSIX_MQUEUE
/* protected by mq_lock */
unsigned long mq_bytes; /* How many bytes can be allocated to mqueue? */
asmlinkage long sys_bind(int, struct sockaddr __user *, int);
asmlinkage long sys_connect(int, struct sockaddr __user *, int);
asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
-asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *,
- const __user sigset_t *, size_t, int);
+asmlinkage long sys_accept4(int, struct sockaddr __user *, int __user *, int);
asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
asmlinkage long sys_send(int, void __user *, size_t, unsigned);
* not do so then mac80211 may add this under certain circumstances.
*/
-/**
- * enum ieee80211_notification_type - Low level driver notification
- * @IEEE80211_NOTIFY_RE_ASSOC: start the re-association sequence
- */
-enum ieee80211_notification_types {
- IEEE80211_NOTIFY_RE_ASSOC,
-};
-
/**
* struct ieee80211_ht_bss_info - describing BSS's HT characteristics
*
void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
u16 tid);
-/**
- * ieee80211_notify_mac - low level driver notification
- * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @notif_type: enum ieee80211_notification_types
- *
- * This function must be called by low level driver to inform mac80211 of
- * low level driver status change or force mac80211 to re-assoc for low
- * level driver internal error that require re-assoc.
- */
-void ieee80211_notify_mac(struct ieee80211_hw *hw,
- enum ieee80211_notification_types notif_type);
-
/**
* ieee80211_find_sta - find a station
*
*/
#define sock_lock_init_class_and_name(sk, sname, skey, name, key) \
do { \
- sk->sk_lock.owned = 0; \
+ sk->sk_lock.owned = 0; \
init_waitqueue_head(&sk->sk_lock.wq); \
spin_lock_init(&(sk)->sk_lock.slock); \
debug_check_no_locks_freed((void *)&(sk)->sk_lock, \
setting below. If enabled, it will also make it impossible to
schedule realtime tasks for non-root users until you allocate
realtime bandwidth for them.
- See Documentation/sched-rt-group.txt for more information.
+ See Documentation/scheduler/sched-rt-group.txt for more information.
choice
depends on GROUP_SCHED
if (ids->in_use >= size)
return -ENOSPC;
+ spin_lock_init(&new->lock);
+ new->deleted = 0;
+ rcu_read_lock();
+ spin_lock(&new->lock);
+
err = idr_get_new(&ids->ipcs_idr, new, &id);
- if (err)
+ if (err) {
+ spin_unlock(&new->lock);
+ rcu_read_unlock();
return err;
+ }
ids->in_use++;
ids->seq = 0;
new->id = ipc_buildid(id, new->seq);
- spin_lock_init(&new->lock);
- new->deleted = 0;
- rcu_read_lock();
- spin_lock(&new->lock);
return id;
}
hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
notifier.o ksysfs.o pm_qos_params.o sched_clock.o
-CFLAGS_REMOVE_sched.o = -mno-spe
-
ifdef CONFIG_FUNCTION_TRACER
# Do not trace debug files and internal ftrace files
CFLAGS_REMOVE_lockdep.o = -pg
CFLAGS_REMOVE_rtmutex-debug.o = -pg
CFLAGS_REMOVE_cgroup-debug.o = -pg
CFLAGS_REMOVE_sched_clock.o = -pg
-CFLAGS_REMOVE_sched.o = -mno-spe -pg
+CFLAGS_REMOVE_sched.o = -pg
endif
obj-$(CONFIG_FREEZER) += freezer.o
struct cgroup *cgrp;
struct cgroup_iter it;
struct task_struct *tsk;
+
/*
- * Validate dentry by checking the superblock operations
+ * Validate dentry by checking the superblock operations,
+ * and make sure it's a directory.
*/
- if (dentry->d_sb->s_op != &cgroup_ops)
+ if (dentry->d_sb->s_op != &cgroup_ops ||
+ !S_ISDIR(dentry->d_inode->i_mode))
goto err;
ret = 0;
mutex_unlock(&cgroup_mutex);
return -EBUSY;
}
-
- parent = cgrp->parent;
- root = cgrp->root;
- sb = root->sb;
+ mutex_unlock(&cgroup_mutex);
/*
* Call pre_destroy handlers of subsys. Notify subsystems
*/
cgroup_call_pre_destroy(cgrp);
- if (cgroup_has_css_refs(cgrp)) {
+ mutex_lock(&cgroup_mutex);
+ parent = cgrp->parent;
+ root = cgrp->root;
+ sb = root->sb;
+
+ if (atomic_read(&cgrp->count)
+ || !list_empty(&cgrp->children)
+ || cgroup_has_css_refs(cgrp)) {
mutex_unlock(&cgroup_mutex);
return -EBUSY;
}
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
{
unsigned long val = CPU_STARTING;
#include <linux/list.h>
#include <linux/mempolicy.h>
#include <linux/mm.h>
+#include <linux/memory.h>
#include <linux/module.h>
#include <linux/mount.h>
#include <linux/namei.h>
int i, j, k; /* indices for partition finding loops */
cpumask_t *doms; /* resulting partition; i.e. sched domains */
struct sched_domain_attr *dattr; /* attributes for custom domains */
- int ndoms; /* number of sched domains in result */
+ int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
- ndoms = 0;
doms = NULL;
dattr = NULL;
csa = NULL;
* Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
*/
doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL);
- if (!doms) {
- ndoms = 0;
+ if (!doms)
goto done;
- }
/*
* The rest of the code, including the scheduler, can deal with
done:
kfree(csa);
+ /*
+ * Fallback to the default domain if kmalloc() failed.
+ * See comments in partition_sched_domains().
+ */
+ if (doms == NULL)
+ ndoms = 1;
+
*domains = doms;
*attributes = dattr;
return ndoms;
* Call this routine anytime after node_states[N_HIGH_MEMORY] changes.
* See also the previous routine cpuset_track_online_cpus().
*/
-void cpuset_track_online_nodes(void)
+static int cpuset_track_online_nodes(struct notifier_block *self,
+ unsigned long action, void *arg)
{
cgroup_lock();
- top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
- scan_for_empty_cpusets(&top_cpuset);
+ switch (action) {
+ case MEM_ONLINE:
+ top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
+ break;
+ case MEM_OFFLINE:
+ top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
+ scan_for_empty_cpusets(&top_cpuset);
+ break;
+ default:
+ break;
+ }
cgroup_unlock();
+ return NOTIFY_OK;
}
#endif
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
hotcpu_notifier(cpuset_track_online_cpus, 0);
+ hotplug_memory_notifier(cpuset_track_online_nodes, 10);
}
/**
struct irqaction *action) { }
#endif
+extern int irq_select_affinity_usr(unsigned int irq);
+
/*
* Debugging printout:
*/
int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
{
struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
if (!desc->chip->set_affinity)
return -EINVAL;
+ spin_lock_irqsave(&desc->lock, flags);
+
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
- spin_unlock_irqrestore(&desc->lock, flags);
- } else
- set_pending_irq(irq, cpumask);
+ } else {
+ desc->status |= IRQ_MOVE_PENDING;
+ desc->pending_mask = cpumask;
+ }
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
#endif
+ desc->status |= IRQ_AFFINITY_SET;
+ spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
/*
* Generic version of the affinity autoselector.
*/
-int irq_select_affinity(unsigned int irq)
+int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc)
{
cpumask_t mask;
- struct irq_desc *desc;
if (!irq_can_set_affinity(irq))
return 0;
cpus_and(mask, cpu_online_map, irq_default_affinity);
- desc = irq_to_desc(irq);
+ /*
+ * Preserve an userspace affinity setup, but make sure that
+ * one of the targets is online.
+ */
+ if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) {
+ if (cpus_intersects(desc->affinity, cpu_online_map))
+ mask = desc->affinity;
+ else
+ desc->status &= ~IRQ_AFFINITY_SET;
+ }
+
desc->affinity = mask;
desc->chip->set_affinity(irq, mask);
return 0;
}
+#else
+static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d)
+{
+ return irq_select_affinity(irq);
+}
#endif
+/*
+ * Called when affinity is set via /proc/irq
+ */
+int irq_select_affinity_usr(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ ret = do_irq_select_affinity(irq, desc);
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ return ret;
+}
+
+#else
+static inline int do_irq_select_affinity(int irq, struct irq_desc *desc)
+{
+ return 0;
+}
#endif
/**
* IRQF_TRIGGER_* but the PIC does not support multiple
* flow-types?
*/
- pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+ pr_debug("No set_type function for IRQ %d (%s)\n", irq,
chip ? (chip->name ? : "unknown") : "unknown");
return 0;
}
/* Undo nested disables: */
desc->depth = 1;
+ /* Exclude IRQ from balancing if requested */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Set default affinity mask once everything is setup */
- irq_select_affinity(irq);
+ do_irq_select_affinity(irq, desc);
} else if ((new->flags & IRQF_TRIGGER_MASK)
&& (new->flags & IRQF_TRIGGER_MASK)
*p = new;
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
#include <linux/irq.h>
-void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- desc->status |= IRQ_MOVE_PENDING;
- desc->pending_mask = mask;
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
void move_masked_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
if (!cpus_intersects(new_value, cpu_online_map))
/* Special case for empty set - allow the architecture
code to set default SMP affinity. */
- return irq_select_affinity(irq) ? -EINVAL : count;
+ return irq_select_affinity_usr(irq) ? -EINVAL : count;
irq_set_affinity(irq, new_value);
char *modname;
const char *name;
unsigned long offset, size;
- char namebuf[KSYM_NAME_LEN];
+ int len;
- name = kallsyms_lookup(address, &size, &offset, &modname, namebuf);
+ name = kallsyms_lookup(address, &size, &offset, &modname, buffer);
if (!name)
return sprintf(buffer, "0x%lx", address);
+ if (name != buffer)
+ strcpy(buffer, name);
+ len = strlen(buffer);
+ buffer += len;
+
if (modname)
- return sprintf(buffer, "%s+%#lx/%#lx [%s]", name, offset,
- size, modname);
+ len += sprintf(buffer, "+%#lx/%#lx [%s]",
+ offset, size, modname);
else
- return sprintf(buffer, "%s+%#lx/%#lx", name, offset, size);
+ len += sprintf(buffer, "+%#lx/%#lx", offset, size);
+
+ return len;
}
/* Look up a kernel symbol and print it to the kernel messages. */
{
printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n");
- printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
+ printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH);
printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS);
- printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
+ printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES);
printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS);
printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE);
* 'M' - System experienced a machine check exception.
* 'B' - System has hit bad_page.
* 'U' - Userspace-defined naughtiness.
+ * 'D' - Kernel has oopsed before
* 'A' - ACPI table overridden.
* 'W' - Taint on warning.
* 'C' - modules from drivers/staging are loaded.
*/
static inline int fastpath_timer_check(struct task_struct *tsk)
{
- struct signal_struct *sig = tsk->signal;
+ struct signal_struct *sig;
- if (unlikely(!sig))
+ /* tsk == current, ensure it is safe to use ->signal/sighand */
+ if (unlikely(tsk->exit_state))
return 0;
if (!task_cputime_zero(&tsk->cputime_expires)) {
if (task_cputime_expired(&task_sample, &tsk->cputime_expires))
return 1;
}
+
+ sig = tsk->signal;
if (!task_cputime_zero(&sig->cputime_expires)) {
struct task_cputime group_sample;
* has some performance issues. The stack dump of a WARN_ON
* is more likely to get the right attention than a printk...
*/
- WARN_ON(msec > (TEST_SUSPEND_SECONDS * 1000));
+ WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
}
#else
put_cpu();
}
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
{
int node, cpu = (unsigned long)__cpu;
};
#ifdef CONFIG_SMP
-static void __init profile_nop(void *unused)
+static inline void profile_nop(void *unused)
{
}
#define create_hash_tables() ({ 0; })
#endif
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
{
struct proc_dir_entry *entry;
return (copied == sizeof(data)) ? 0 : -EIO;
}
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
#include <linux/compat.h>
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
unlock_kernel();
return ret;
}
-#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif /* CONFIG_COMPAT */
}
mutex_lock(&relay_channels_mutex);
- for_each_online_cpu(i)
+ for_each_possible_cpu(i)
if (chan->buf[i])
__relay_reset(chan->buf[i], 0);
mutex_unlock(&relay_channels_mutex);
return chan;
free_bufs:
- for_each_online_cpu(i) {
- if (!chan->buf[i])
- break;
- relay_close_buf(chan->buf[i]);
+ for_each_possible_cpu(i) {
+ if (chan->buf[i])
+ relay_close_buf(chan->buf[i]);
}
kref_put(&chan->kref, relay_destroy_channel);
static unsigned long cpu_avg_load_per_task(int cpu)
{
struct rq *rq = cpu_rq(cpu);
+ unsigned long nr_running = ACCESS_ONCE(rq->nr_running);
- if (rq->nr_running)
- rq->avg_load_per_task = rq->load.weight / rq->nr_running;
+ if (nr_running)
+ rq->avg_load_per_task = rq->load.weight / nr_running;
else
rq->avg_load_per_task = 0;
*
* The passed in 'doms_new' should be kmalloc'd. This routine takes
* ownership of it and will kfree it when done with it. If the caller
- * failed the kmalloc call, then it can pass in doms_new == NULL,
- * and partition_sched_domains() will fallback to the single partition
- * 'fallback_doms', it also forces the domains to be rebuilt.
+ * failed the kmalloc call, then it can pass in doms_new == NULL &&
+ * ndoms_new == 1, and partition_sched_domains() will fallback to
+ * the single partition 'fallback_doms', it also forces the domains
+ * to be rebuilt.
*
- * If doms_new==NULL it will be replaced with cpu_online_map.
- * ndoms_new==0 is a special case for destroying existing domains.
- * It will not create the default domain.
+ * If doms_new == NULL it will be replaced with cpu_online_map.
+ * ndoms_new == 0 is a special case for destroying existing domains,
+ * and it will not create the default domain.
*
* Call with hotplug lock held
*/
#undef __P
{
+ unsigned int this_cpu = raw_smp_processor_id();
u64 t0, t1;
- t0 = sched_clock();
- t1 = sched_clock();
+ t0 = cpu_clock(this_cpu);
+ t1 = cpu_clock(this_cpu);
SEQ_printf(m, "%-35s:%21Ld\n",
"clock-delta", (long long)(t1-t0));
}
{
struct signal_struct *sig;
- sig = tsk->signal;
- if (unlikely(!sig))
+ /* tsk == current, ensure it is safe to use ->signal */
+ if (unlikely(tsk->exit_state))
return;
+
+ sig = tsk->signal;
if (sig->cputime.totals) {
struct task_cputime *times;
{
struct signal_struct *sig;
- sig = tsk->signal;
- if (unlikely(!sig))
+ /* tsk == current, ensure it is safe to use ->signal */
+ if (unlikely(tsk->exit_state))
return;
+
+ sig = tsk->signal;
if (sig->cputime.totals) {
struct task_cputime *times;
struct signal_struct *sig;
sig = tsk->signal;
+ /* see __exit_signal()->task_rq_unlock_wait() */
+ barrier();
if (unlikely(!sig))
return;
+
if (sig->cputime.totals) {
struct task_cputime *times;
int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
{
struct work_struct *sm_work;
- int i;
+ int i, ret;
/* Set up initial state. */
mutex_lock(&lock);
/* This will release the thread on our CPU. */
put_cpu();
flush_workqueue(stop_machine_wq);
+ ret = active.fnret;
mutex_unlock(&lock);
- return active.fnret;
+ return ret;
}
int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
cond_syscall(sys_bind);
cond_syscall(sys_listen);
cond_syscall(sys_accept);
-cond_syscall(sys_paccept);
+cond_syscall(sys_accept4);
cond_syscall(sys_connect);
cond_syscall(sys_getsockname);
cond_syscall(sys_getpeername);
#ifdef CONFIG_INOTIFY_USER
extern struct ctl_table inotify_table[];
#endif
+#ifdef CONFIG_EPOLL
+extern struct ctl_table epoll_table[];
+#endif
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
.child = inotify_table,
},
#endif
+#ifdef CONFIG_EPOLL
+ {
+ .procname = "epoll",
+ .mode = 0555,
+ .child = epoll_table,
+ },
+#endif
#endif
{
.ctl_name = KERN_SETUID_DUMPABLE,
};
static int ftrace_filtered;
-static int tracing_on;
static LIST_HEAD(ftrace_new_addrs);
static int
__ftrace_replace_code(struct dyn_ftrace *rec,
- unsigned char *old, unsigned char *new, int enable)
+ unsigned char *nop, int enable)
{
unsigned long ip, fl;
+ unsigned char *call, *old, *new;
ip = rec->ip;
- if (ftrace_filtered && enable) {
+ /*
+ * If this record is not to be traced and
+ * it is not enabled then do nothing.
+ *
+ * If this record is not to be traced and
+ * it is enabled then disabled it.
+ *
+ */
+ if (rec->flags & FTRACE_FL_NOTRACE) {
+ if (rec->flags & FTRACE_FL_ENABLED)
+ rec->flags &= ~FTRACE_FL_ENABLED;
+ else
+ return 0;
+
+ } else if (ftrace_filtered && enable) {
/*
- * If filtering is on:
- *
- * If this record is set to be filtered and
- * is enabled then do nothing.
- *
- * If this record is set to be filtered and
- * it is not enabled, enable it.
- *
- * If this record is not set to be filtered
- * and it is not enabled do nothing.
- *
- * If this record is set not to trace then
- * do nothing.
- *
- * If this record is set not to trace and
- * it is enabled then disable it.
- *
- * If this record is not set to be filtered and
- * it is enabled, disable it.
+ * Filtering is on:
*/
- fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_NOTRACE |
- FTRACE_FL_ENABLED);
+ fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_ENABLED);
- if ((fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED)) ||
- (fl == (FTRACE_FL_FILTER | FTRACE_FL_NOTRACE)) ||
- !fl || (fl == FTRACE_FL_NOTRACE))
+ /* Record is filtered and enabled, do nothing */
+ if (fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED))
return 0;
- /*
- * If it is enabled disable it,
- * otherwise enable it!
- */
- if (fl & FTRACE_FL_ENABLED) {
- /* swap new and old */
- new = old;
- old = ftrace_call_replace(ip, FTRACE_ADDR);
+ /* Record is not filtered and is not enabled do nothing */
+ if (!fl)
+ return 0;
+
+ /* Record is not filtered but enabled, disable it */
+ if (fl == FTRACE_FL_ENABLED)
rec->flags &= ~FTRACE_FL_ENABLED;
- } else {
- new = ftrace_call_replace(ip, FTRACE_ADDR);
+ else
+ /* Otherwise record is filtered but not enabled, enable it */
rec->flags |= FTRACE_FL_ENABLED;
- }
} else {
+ /* Disable or not filtered */
if (enable) {
- /*
- * If this record is set not to trace and is
- * not enabled, do nothing.
- */
- fl = rec->flags & (FTRACE_FL_NOTRACE | FTRACE_FL_ENABLED);
- if (fl == FTRACE_FL_NOTRACE)
- return 0;
-
- new = ftrace_call_replace(ip, FTRACE_ADDR);
- } else
- old = ftrace_call_replace(ip, FTRACE_ADDR);
-
- if (enable) {
+ /* if record is enabled, do nothing */
if (rec->flags & FTRACE_FL_ENABLED)
return 0;
+
rec->flags |= FTRACE_FL_ENABLED;
+
} else {
+
+ /* if record is not enabled do nothing */
if (!(rec->flags & FTRACE_FL_ENABLED))
return 0;
+
rec->flags &= ~FTRACE_FL_ENABLED;
}
}
+ call = ftrace_call_replace(ip, FTRACE_ADDR);
+
+ if (rec->flags & FTRACE_FL_ENABLED) {
+ old = nop;
+ new = call;
+ } else {
+ old = call;
+ new = nop;
+ }
+
return ftrace_modify_code(ip, old, new);
}
static void ftrace_replace_code(int enable)
{
int i, failed;
- unsigned char *new = NULL, *old = NULL;
+ unsigned char *nop = NULL;
struct dyn_ftrace *rec;
struct ftrace_page *pg;
- if (enable)
- old = ftrace_nop_replace();
- else
- new = ftrace_nop_replace();
+ nop = ftrace_nop_replace();
for (pg = ftrace_pages_start; pg; pg = pg->next) {
for (i = 0; i < pg->index; i++) {
unfreeze_record(rec);
}
- failed = __ftrace_replace_code(rec, old, new, enable);
+ failed = __ftrace_replace_code(rec, nop, enable);
if (failed && (rec->flags & FTRACE_FL_CONVERTED)) {
rec->flags |= FTRACE_FL_FAILED;
if ((system_state == SYSTEM_BOOTING) ||
{
int *command = data;
- if (*command & FTRACE_ENABLE_CALLS) {
+ if (*command & FTRACE_ENABLE_CALLS)
ftrace_replace_code(1);
- tracing_on = 1;
- } else if (*command & FTRACE_DISABLE_CALLS) {
+ else if (*command & FTRACE_DISABLE_CALLS)
ftrace_replace_code(0);
- tracing_on = 0;
- }
if (*command & FTRACE_UPDATE_TRACE_FUNC)
ftrace_update_ftrace_func(ftrace_trace_function);
mutex_lock(&ftrace_start_lock);
ftrace_start++;
- if (ftrace_start == 1)
- command |= FTRACE_ENABLE_CALLS;
+ command |= FTRACE_ENABLE_CALLS;
if (saved_ftrace_func != ftrace_trace_function) {
saved_ftrace_func = ftrace_trace_function;
cnt = num_to_init / ENTRIES_PER_PAGE;
pr_info("ftrace: allocating %ld entries in %d pages\n",
- num_to_init, cnt);
+ num_to_init, cnt + 1);
for (i = 0; i < cnt; i++) {
pg->next = (void *)get_zeroed_page(GFP_KERNEL);
((iter->flags & FTRACE_ITER_FAILURES) &&
!(rec->flags & FTRACE_FL_FAILED)) ||
+ ((iter->flags & FTRACE_ITER_FILTER) &&
+ !(rec->flags & FTRACE_FL_FILTER)) ||
+
((iter->flags & FTRACE_ITER_NOTRACE) &&
!(rec->flags & FTRACE_FL_NOTRACE))) {
rec = NULL;
void *p = NULL;
loff_t l = -1;
- if (*pos != iter->pos) {
- for (p = t_next(m, p, &l); p && l < *pos; p = t_next(m, p, &l))
- ;
- } else {
- l = *pos;
- p = t_next(m, p, &l);
- }
+ if (*pos > iter->pos)
+ *pos = iter->pos;
+
+ l = *pos;
+ p = t_next(m, p, &l);
return p;
}
static int t_show(struct seq_file *m, void *v)
{
+ struct ftrace_iterator *iter = m->private;
struct dyn_ftrace *rec = v;
char str[KSYM_SYMBOL_LEN];
+ int ret = 0;
if (!rec)
return 0;
kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
- seq_printf(m, "%s\n", str);
+ ret = seq_printf(m, "%s\n", str);
+ if (ret < 0) {
+ iter->pos--;
+ iter->idx--;
+ }
return 0;
}
return -ENOMEM;
iter->pg = ftrace_pages_start;
- iter->pos = -1;
+ iter->pos = 0;
ret = seq_open(file, &show_ftrace_seq_ops);
if (!ret) {
if (file->f_mode & FMODE_READ) {
iter->pg = ftrace_pages_start;
- iter->pos = -1;
+ iter->pos = 0;
iter->flags = enable ? FTRACE_ITER_FILTER :
FTRACE_ITER_NOTRACE;
mutex_lock(&ftrace_sysctl_lock);
mutex_lock(&ftrace_start_lock);
- if (iter->filtered && ftrace_start && ftrace_enabled)
+ if (ftrace_start && ftrace_enabled)
ftrace_run_update_code(FTRACE_ENABLE_CALLS);
mutex_unlock(&ftrace_start_lock);
mutex_unlock(&ftrace_sysctl_lock);
#include <linux/list.h>
#include <linux/fs.h>
+#include "trace.h"
+
+/* Global flag to disable all recording to ring buffers */
+static int ring_buffers_off __read_mostly;
+
+/**
+ * tracing_on - enable all tracing buffers
+ *
+ * This function enables all tracing buffers that may have been
+ * disabled with tracing_off.
+ */
+void tracing_on(void)
+{
+ ring_buffers_off = 0;
+}
+
+/**
+ * tracing_off - turn off all tracing buffers
+ *
+ * This function stops all tracing buffers from recording data.
+ * It does not disable any overhead the tracers themselves may
+ * be causing. This function simply causes all recording to
+ * the ring buffers to fail.
+ */
+void tracing_off(void)
+{
+ ring_buffers_off = 1;
+}
+
/* Up this if you want to test the TIME_EXTENTS and normalization */
#define DEBUG_SHIFT 0
/* FIXME!!! */
u64 ring_buffer_time_stamp(int cpu)
{
+ u64 time;
+
+ preempt_disable_notrace();
/* shift to debug/test normalization and TIME_EXTENTS */
- return sched_clock() << DEBUG_SHIFT;
+ time = sched_clock() << DEBUG_SHIFT;
+ preempt_enable_notrace();
+
+ return time;
}
void ring_buffer_normalize_time_stamp(int cpu, u64 *ts)
LIST_HEAD(pages);
int i, cpu;
+ /*
+ * Always succeed at resizing a non-existent buffer:
+ */
+ if (!buffer)
+ return size;
+
size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
size *= BUF_PAGE_SIZE;
buffer_size = buffer->pages * BUF_PAGE_SIZE;
list_del_init(&page->list);
free_buffer_page(page);
}
+ mutex_unlock(&buffer->mutex);
return -ENOMEM;
}
struct ring_buffer_event *event;
int cpu, resched;
+ if (ring_buffers_off)
+ return NULL;
+
if (atomic_read(&buffer->record_disabled))
return NULL;
out:
if (resched)
- preempt_enable_notrace();
+ preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
return NULL;
int ret = -EBUSY;
int cpu, resched;
+ if (ring_buffers_off)
+ return -EBUSY;
+
if (atomic_read(&buffer->record_disabled))
return -EBUSY;
return 0;
}
+static ssize_t
+rb_simple_read(struct file *filp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ int *p = filp->private_data;
+ char buf[64];
+ int r;
+
+ /* !ring_buffers_off == tracing_on */
+ r = sprintf(buf, "%d\n", !*p);
+
+ return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
+}
+
+static ssize_t
+rb_simple_write(struct file *filp, const char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ int *p = filp->private_data;
+ char buf[64];
+ long val;
+ int ret;
+
+ if (cnt >= sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, cnt))
+ return -EFAULT;
+
+ buf[cnt] = 0;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ /* !ring_buffers_off == tracing_on */
+ *p = !val;
+
+ (*ppos)++;
+
+ return cnt;
+}
+
+static struct file_operations rb_simple_fops = {
+ .open = tracing_open_generic,
+ .read = rb_simple_read,
+ .write = rb_simple_write,
+};
+
+
+static __init int rb_init_debugfs(void)
+{
+ struct dentry *d_tracer;
+ struct dentry *entry;
+
+ d_tracer = tracing_init_dentry();
+
+ entry = debugfs_create_file("tracing_on", 0644, d_tracer,
+ &ring_buffers_off, &rb_simple_fops);
+ if (!entry)
+ pr_warning("Could not create debugfs 'tracing_on' entry\n");
+
+ return 0;
+}
+
+fs_initcall(rb_init_debugfs);
ring_buffer_read_finish(iter->buffer_iter[cpu]);
}
mutex_unlock(&trace_types_lock);
+ kfree(iter);
return ERR_PTR(-ENOMEM);
}
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
+static unsigned long prev_overruns;
static void mmio_reset_data(struct trace_array *tr)
{
int cpu;
overrun_detected = false;
+ prev_overruns = 0;
tr->time_start = ftrace_now(tr->cpu);
for_each_online_cpu(cpu)
static unsigned long count_overruns(struct trace_iterator *iter)
{
- int cpu;
unsigned long cnt = 0;
-/* FIXME: */
-#if 0
- for_each_online_cpu(cpu) {
- cnt += iter->overrun[cpu];
- iter->overrun[cpu] = 0;
- }
-#endif
- (void)cpu;
+ unsigned long over = ring_buffer_overruns(iter->tr->buffer);
+
+ if (over > prev_overruns)
+ cnt = over - prev_overruns;
+ prev_overruns = over;
return cnt;
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- long i = (long)m->private;
+ long i;
(*pos)++;
- i++;
+ if (v == SEQ_START_TOKEN)
+ i = 0;
+ else {
+ i = *(long *)v;
+ i++;
+ }
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
static void *t_start(struct seq_file *m, loff_t *pos)
{
- void *t = &m->private;
+ void *t = SEQ_START_TOKEN;
loff_t l = 0;
local_irq_disable();
__raw_spin_lock(&max_stack_lock);
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
for (; t && l < *pos; t = t_next(m, t, &l))
;
static int t_show(struct seq_file *m, void *v)
{
- long i = *(long *)v;
+ long i;
int size;
- if (i < 0) {
+ if (v == SEQ_START_TOKEN) {
seq_printf(m, " Depth Size Location"
" (%d entries)\n"
" ----- ---- --------\n",
return 0;
}
+ i = *(long *)v;
+
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
return 0;
int ret;
ret = seq_open(file, &stack_trace_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = (void *)-1;
- }
return ret;
}
new = get_from_free_list(idp);
if (!new)
return -1;
+ new->layer = l-1;
rcu_assign_pointer(p->ary[m], new);
p->count++;
}
if (unlikely(!p)) {
if (!(p = get_from_free_list(idp)))
return -1;
+ p->layer = 0;
layers = 1;
}
/*
}
new->ary[0] = p;
new->count = 1;
+ new->layer = layers-1;
if (p->bitmap == IDR_FULL)
__set_bit(0, &new->bitmap);
p = new;
int n;
struct idr_layer *p;
- n = idp->layers * IDR_BITS;
p = rcu_dereference(idp->top);
+ if (!p)
+ return NULL;
+ n = (p->layer+1) * IDR_BITS;
/* Mask off upper bits we don't use for the search. */
id &= MAX_ID_MASK;
if (id >= (1 << n))
return NULL;
+ BUG_ON(n == 0);
while (n > 0 && p) {
n -= IDR_BITS;
+ BUG_ON(n != p->layer*IDR_BITS);
p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
}
return((void *)p);
int n;
struct idr_layer *p, *old_p;
- n = idp->layers * IDR_BITS;
p = idp->top;
+ if (!p)
+ return ERR_PTR(-EINVAL);
+
+ n = (p->layer+1) * IDR_BITS;
id &= MAX_ID_MASK;
WARN_ON(!irqs_disabled());
kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
} else
- kunmap(miter->addr);
+ kunmap(miter->page);
miter->page = NULL;
miter->addr = NULL;
dma_addr_t dev_addr;
void *ret;
int order = get_order(size);
+ u64 dma_mask = DMA_32BIT_MASK;
+
+ if (hwdev && hwdev->coherent_dma_mask)
+ dma_mask = hwdev->coherent_dma_mask;
ret = (void *)__get_free_pages(flags, order);
- if (ret && address_needs_mapping(hwdev, virt_to_bus(ret), size)) {
+ if (ret && !is_buffer_dma_capable(dma_mask, virt_to_bus(ret), size)) {
/*
* The allocated memory isn't reachable by the device.
* Fall back on swiotlb_map_single().
dev_addr = virt_to_bus(ret);
/* Confirm address can be DMA'd by device */
- if (address_needs_mapping(hwdev, dev_addr, size)) {
+ if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) {
printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
- (unsigned long long)*hwdev->dma_mask,
+ (unsigned long long)dma_mask,
(unsigned long long)dev_addr);
/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/ioport.h>
-#include <linux/cpuset.h>
#include <linux/delay.h>
#include <linux/migrate.h>
#include <linux/page-isolation.h>
pgdat->node_start_pfn;
}
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
return 0;
}
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
* call this function after deciding the zone to which to
* add the new pages.
*/
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
}
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
{
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
/* we online node here. we can't roll back from here. */
node_set_online(nid);
- cpuset_track_online_nodes();
-
if (new_pgdat) {
ret = register_one_node(nid);
/*
remove_migration_ptes(page, page);
rc = mapping->a_ops->writepage(page, &wbc);
- if (rc < 0)
- /* I/O Error writing */
- return -EIO;
if (rc != AOP_WRITEPAGE_ACTIVATE)
/* unlocked. Relock */
lock_page(page);
- return -EAGAIN;
+ return (rc < 0) ? -EIO : -EAGAIN;
}
/*
unsigned long addr = start;
struct page *pages[16]; /* 16 gives a reasonable batch */
int nr_pages = (end - start) / PAGE_SIZE;
- int ret;
+ int ret = 0;
int gup_flags = 0;
VM_BUG_ON(start & ~PAGE_MASK);
#if !defined(CONFIG_SPARSEMEM)
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
pgdat->node_page_cgroup = NULL;
}
return section->page_cgroup + pfn;
}
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
{
struct mem_section *section;
struct page_cgroup *base, *pc;
section = __pfn_to_section(pfn);
- if (section->page_cgroup)
- return 0;
-
- nid = page_to_nid(pfn_to_page(pfn));
-
- table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
- if (slab_is_available()) {
- base = kmalloc_node(table_size, GFP_KERNEL, nid);
- if (!base)
- base = vmalloc_node(table_size, nid);
- } else {
- base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+ if (!section->page_cgroup) {
+ nid = page_to_nid(pfn_to_page(pfn));
+ table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
+ if (slab_is_available()) {
+ base = kmalloc_node(table_size, GFP_KERNEL, nid);
+ if (!base)
+ base = vmalloc_node(table_size, nid);
+ } else {
+ base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+ table_size,
PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+ }
+ } else {
+ /*
+ * We don't have to allocate page_cgroup again, but
+ * address of memmap may be changed. So, we have to initialize
+ * again.
+ */
+ base = section->page_cgroup + pfn;
+ table_size = 0;
+ /* check address of memmap is changed or not. */
+ if (base->page == pfn_to_page(pfn))
+ return 0;
}
if (!base) {
}
}
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages,
int nid)
{
return -ENOMEM;
}
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages, int nid)
{
unsigned long start, end, pfn;
}
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
unsigned long action, void *arg)
{
struct memory_notify *mn = arg;
ret = online_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
- case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
offline_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
+ case MEM_CANCEL_ONLINE:
case MEM_GOING_OFFLINE:
break;
case MEM_ONLINE:
case MEM_CANCEL_OFFLINE:
break;
}
- ret = notifier_from_errno(ret);
+
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
+
return ret;
}
" want\n");
}
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
return;
}
case MEM_CANCEL_OFFLINE:
break;
}
-
- ret = notifier_from_errno(ret);
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
return ret;
}
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
int nr_pages)
{
unsigned long section_nr = pfn_to_section_nr(start_pfn);
BUG_ON(addr >= end);
pgd = pgd_offset_k(addr);
- flush_cache_vunmap(addr, end);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
BUG_ON(size & ~PAGE_MASK);
- addr = ALIGN(vstart, align);
-
va = kmalloc_node(sizeof(struct vmap_area),
gfp_mask & GFP_RECLAIM_MASK, node);
if (unlikely(!va))
return ERR_PTR(-ENOMEM);
retry:
+ addr = ALIGN(vstart, align);
+
spin_lock(&vmap_area_lock);
/* XXX: could have a last_hole cache */
n = vmap_area_root.rb_node;
goto found;
}
- while (addr + size >= first->va_start && addr + size <= vend) {
+ while (addr + size > first->va_start && addr + size <= vend) {
addr = ALIGN(first->va_end + PAGE_SIZE, align);
n = rb_next(&first->rb_node);
spin_unlock(&purge_lock);
}
+/*
+ * Kick off a purge of the outstanding lazy areas. Don't bother if somebody
+ * is already purging.
+ */
+static void try_purge_vmap_area_lazy(void)
+{
+ unsigned long start = ULONG_MAX, end = 0;
+
+ __purge_vmap_area_lazy(&start, &end, 0, 0);
+}
+
/*
* Kick off a purge of the outstanding lazy areas.
*/
{
unsigned long start = ULONG_MAX, end = 0;
- __purge_vmap_area_lazy(&start, &end, 0, 0);
+ __purge_vmap_area_lazy(&start, &end, 1, 0);
}
/*
- * Free and unmap a vmap area
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
*/
-static void free_unmap_vmap_area(struct vmap_area *va)
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
if (unlikely(atomic_read(&vmap_lazy_nr) > lazy_max_pages()))
- purge_vmap_area_lazy();
+ try_purge_vmap_area_lazy();
+}
+
+/*
+ * Free and unmap a vmap area
+ */
+static void free_unmap_vmap_area(struct vmap_area *va)
+{
+ flush_cache_vunmap(va->va_start, va->va_end);
+ free_unmap_vmap_area_noflush(va);
}
static struct vmap_area *find_vmap_area(unsigned long addr)
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area(vb->va);
+ free_unmap_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
BUG_ON(size & ~PAGE_MASK);
BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
+
+ flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size);
+
order = get_order(size);
offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1);
* Try to allocate it some swap space here.
*/
if (PageAnon(page) && !PageSwapCache(page)) {
+ if (!(sc->gfp_mask & __GFP_IO))
+ goto keep_locked;
switch (try_to_munlock(page)) {
case SWAP_FAIL: /* shouldn't happen */
case SWAP_AGAIN:
}
if (!add_to_swap(page, GFP_ATOMIC))
goto activate_locked;
+ may_enter_fs = 1;
}
#endif /* CONFIG_SWAP */
list_add(&page->lru, &l_inactive);
}
+ spin_lock_irq(&zone->lru_lock);
/*
* Count referenced pages from currently used mappings as
* rotated, even though they are moved to the inactive list.
pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
- spin_lock_irq(&zone->lru_lock);
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
file_prio = 200 - sc->swappiness;
/*
- * anon recent_rotated[0]
- * %anon = 100 * ----------- / ----------------- * IO cost
- * anon + file rotate_sum
+ * The amount of pressure on anon vs file pages is inversely
+ * proportional to the fraction of recently scanned pages on
+ * each list that were recently referenced and in active use.
*/
ap = (anon_prio + 1) * (zone->recent_scanned[0] + 1);
ap /= zone->recent_rotated[0] + 1;
static unsigned char nas[19]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
- AL(6)};
+ AL(4)};
#undef AL
asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned flags)
return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
}
-asmlinkage long compat_sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen,
- const compat_sigset_t __user *sigmask,
- compat_size_t sigsetsize, int flags)
-{
- compat_sigset_t ss32;
- sigset_t ksigmask, sigsaved;
- int ret;
-
- if (sigmask) {
- if (sigsetsize != sizeof(compat_sigset_t))
- return -EINVAL;
- if (copy_from_user(&ss32, sigmask, sizeof(ss32)))
- return -EFAULT;
- sigset_from_compat(&ksigmask, &ss32);
-
- sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
- sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
- }
-
- ret = do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
-
- if (ret == -ERESTARTNOHAND) {
- /*
- * Don't restore the signal mask yet. Let do_signal() deliver
- * the signal on the way back to userspace, before the signal
- * mask is restored.
- */
- if (sigmask) {
- memcpy(¤t->saved_sigmask, &sigsaved,
- sizeof(sigsaved));
- set_restore_sigmask();
- }
- } else if (sigmask)
- sigprocmask(SIG_SETMASK, &sigsaved, NULL);
-
- return ret;
-}
-
asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
{
int ret;
u32 a[6];
u32 a0, a1;
- if (call < SYS_SOCKET || call > SYS_PACCEPT)
+ if (call < SYS_SOCKET || call > SYS_ACCEPT4)
return -EINVAL;
if (copy_from_user(a, args, nas[call]))
return -EFAULT;
ret = sys_listen(a0, a1);
break;
case SYS_ACCEPT:
- ret = do_accept(a0, compat_ptr(a1), compat_ptr(a[2]), 0);
+ ret = sys_accept4(a0, compat_ptr(a1), compat_ptr(a[2]), 0);
break;
case SYS_GETSOCKNAME:
ret = sys_getsockname(a0, compat_ptr(a1), compat_ptr(a[2]));
case SYS_RECVMSG:
ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
break;
- case SYS_PACCEPT:
- ret = compat_sys_paccept(a0, compat_ptr(a1), compat_ptr(a[2]),
- compat_ptr(a[3]), a[4], a[5]);
+ case SYS_ACCEPT4:
+ ret = sys_accept4(a0, compat_ptr(a1), compat_ptr(a[2]), a[3]);
break;
default:
ret = -EINVAL;
/* make sure that we don't pick a non-existing transmit queue */
ntxq = pkt_dev->odev->real_num_tx_queues;
- if (ntxq > num_online_cpus() && (pkt_dev->flags & F_QUEUE_MAP_CPU)) {
- printk(KERN_WARNING "pktgen: WARNING: QUEUE_MAP_CPU "
- "disabled because CPU count (%d) exceeds number "
- "of tx queues (%d) on %s\n", num_online_cpus(), ntxq,
- pkt_dev->odev->name);
- pkt_dev->flags &= ~F_QUEUE_MAP_CPU;
- }
+
if (ntxq <= pkt_dev->queue_map_min) {
printk(KERN_WARNING "pktgen: WARNING: Requested "
"queue_map_min (zero-based) (%d) exceeds valid range "
}
pkt_dev->cur_queue_map = t;
}
+ pkt_dev->cur_queue_map = pkt_dev->cur_queue_map % pkt_dev->odev->real_num_tx_queues;
}
/* Increment/randomize headers according to flags and current values
if (ifm->ifi_change)
flags = (flags & ifm->ifi_change) |
(dev->flags & ~ifm->ifi_change);
- dev_change_flags(dev, flags);
+ err = dev_change_flags(dev, flags);
+ if (err < 0)
+ goto errout;
}
if (tb[IFLA_TXQLEN])
if (!fpl)
return -ENOMEM;
*fplp = fpl;
- INIT_LIST_HEAD(&fpl->list);
fpl->count = 0;
}
fpp = &fpl->fp[fpl->count];
new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL);
if (new_fpl) {
- INIT_LIST_HEAD(&new_fpl->list);
for (i=fpl->count-1; i>=0; i--)
get_file(fpl->fp[i]);
memcpy(new_fpl, fpl, sizeof(*fpl));
static struct lock_class_key af_family_keys[AF_MAX];
static struct lock_class_key af_family_slock_keys[AF_MAX];
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
/*
* Make lock validator output more readable. (we pre-construct these
* strings build-time, so that runtime initialization of socket
"clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" ,
"clock-AF_MAX"
};
-#endif
/*
* sk_callback_lock locking rules are per-address-family,
},
},
.proto = sk->sk_protocol,
+ .flags = inet_sk_flowi_flags(sk),
.uli_u = {
.ports = {
.sport = inet->sport,
hash = protocol & (MAX_INET_PROTOS - 1);
ipprot = rcu_dereference(inet_protos[hash]);
- if (ipprot != NULL && (net == &init_net || ipprot->netns_ok)) {
+ if (ipprot != NULL) {
int ret;
+ if (!net_eq(net, &init_net) && !ipprot->netns_ok) {
+ if (net_ratelimit())
+ printk("%s: proto %d isn't netns-ready\n",
+ __func__, protocol);
+ kfree_skb(skb);
+ goto out;
+ }
+
if (!ipprot->no_policy) {
if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
kfree_skb(skb);
goto proc_cache_fail;
#endif
return 0;
-reg_notif_fail:
- kmem_cache_destroy(mrt_cachep);
#ifdef CONFIG_PROC_FS
-proc_vif_fail:
- unregister_netdevice_notifier(&ip_mr_notifier);
proc_cache_fail:
proc_net_remove(&init_net, "ip_mr_vif");
+proc_vif_fail:
+ unregister_netdevice_notifier(&ip_mr_notifier);
#endif
+reg_notif_fail:
+ del_timer(&ipmr_expire_timer);
+ kmem_cache_destroy(mrt_cachep);
return err;
}
.saddr = saddr,
.tos = tos } },
.proto = sk->sk_protocol,
+ .flags = inet_sk_flowi_flags(sk),
.uli_u = { .ports =
{ .sport = inet->sport,
.dport = dport } } };
switch (rthdr->type) {
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
+ if (rthdr->hdrlen != 2 ||
+ rthdr->segments_left != 1) {
+ err = -EINVAL;
+ goto exit_f;
+ }
break;
#endif
default:
.open = ip6mr_vif_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
static void *ipmr_mfc_seq_start(struct seq_file *seq, loff_t *pos)
.open = ipmr_mfc_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
#endif
}
/* routing header option needs extra check */
+ retv = -EINVAL;
if (optname == IPV6_RTHDR && opt && opt->srcrt) {
struct ipv6_rt_hdr *rthdr = opt->srcrt;
switch (rthdr->type) {
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
+ if (rthdr->hdrlen != 2 ||
+ rthdr->segments_left != 1)
+ goto sticky_done;
+
break;
#endif
default:
static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void **mib)
{
- static char name[32];
+ char name[32];
int i;
/* print by name -- deprecated items */
p = icmp6type2name[icmptype];
if (!p) /* don't print un-named types here */
continue;
- (void) snprintf(name, sizeof(name)-1, "Icmp6%s%s",
+ snprintf(name, sizeof(name), "Icmp6%s%s",
i & 0x100 ? "Out" : "In", p);
seq_printf(seq, "%-32s\t%lu\n", name,
snmp_fold_field(mib, i));
val = snmp_fold_field(mib, i);
if (!val)
continue;
- (void) snprintf(name, sizeof(name)-1, "Icmp6%sType%u",
+ snprintf(name, sizeof(name), "Icmp6%sType%u",
i & 0x100 ? "Out" : "In", i & 0xff);
seq_printf(seq, "%-32s\t%lu\n", name, val);
}
ieee80211_restart_sta_timer(sdata);
rcu_read_unlock();
}
-
-/* driver notification call */
-void ieee80211_notify_mac(struct ieee80211_hw *hw,
- enum ieee80211_notification_types notif_type)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_sub_if_data *sdata;
-
- switch (notif_type) {
- case IEEE80211_NOTIFY_RE_ASSOC:
- rtnl_lock();
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- continue;
-
- ieee80211_sta_req_auth(sdata, &sdata->u.sta);
- }
- rtnl_unlock();
- break;
- }
-}
-EXPORT_SYMBOL(ieee80211_notify_mac);
#include <net/phonet/phonet.h>
#include <net/phonet/pn_dev.h>
-static struct net_proto_family phonet_proto_family;
-static struct phonet_protocol *phonet_proto_get(int protocol);
-static inline void phonet_proto_put(struct phonet_protocol *pp);
+/* Transport protocol registration */
+static struct phonet_protocol *proto_tab[PHONET_NPROTO] __read_mostly;
+static DEFINE_SPINLOCK(proto_tab_lock);
+
+static struct phonet_protocol *phonet_proto_get(int protocol)
+{
+ struct phonet_protocol *pp;
+
+ if (protocol >= PHONET_NPROTO)
+ return NULL;
+
+ spin_lock(&proto_tab_lock);
+ pp = proto_tab[protocol];
+ if (pp && !try_module_get(pp->prot->owner))
+ pp = NULL;
+ spin_unlock(&proto_tab_lock);
+
+ return pp;
+}
+
+static inline void phonet_proto_put(struct phonet_protocol *pp)
+{
+ module_put(pp->prot->owner);
+}
/* protocol family functions */
struct phonethdr *ph;
int err;
- if (skb->len + 2 > 0xffff) {
- /* Phonet length field would overflow */
+ if (skb->len + 2 > 0xffff /* Phonet length field limit */ ||
+ skb->len + sizeof(struct phonethdr) > dev->mtu) {
err = -EMSGSIZE;
goto drop;
}
.func = phonet_rcv,
};
-/* Transport protocol registration */
-static struct phonet_protocol *proto_tab[PHONET_NPROTO] __read_mostly;
-static DEFINE_SPINLOCK(proto_tab_lock);
-
int __init_or_module phonet_proto_register(int protocol,
struct phonet_protocol *pp)
{
}
EXPORT_SYMBOL(phonet_proto_unregister);
-static struct phonet_protocol *phonet_proto_get(int protocol)
-{
- struct phonet_protocol *pp;
-
- if (protocol >= PHONET_NPROTO)
- return NULL;
-
- spin_lock(&proto_tab_lock);
- pp = proto_tab[protocol];
- if (pp && !try_module_get(pp->prot->owner))
- pp = NULL;
- spin_unlock(&proto_tab_lock);
-
- return pp;
-}
-
-static inline void phonet_proto_put(struct phonet_protocol *pp)
-{
- module_put(pp->prot->owner);
-}
-
/* Module registration */
static int __init phonet_init(void)
{
struct nlattr *nest;
nest = nla_nest_start(skb, TCA_STAB);
+ if (nest == NULL)
+ goto nla_put_failure;
NLA_PUT(skb, TCA_STAB_BASE, sizeof(stab->szopts), &stab->szopts);
nla_nest_end(skb, nest);
void netif_carrier_on(struct net_device *dev)
{
if (test_and_clear_bit(__LINK_STATE_NOCARRIER, &dev->state)) {
+ if (dev->reg_state == NETREG_UNINITIALIZED)
+ return;
linkwatch_fire_event(dev);
if (netif_running(dev))
__netdev_watchdog_up(dev);
*/
void netif_carrier_off(struct net_device *dev)
{
- if (!test_and_set_bit(__LINK_STATE_NOCARRIER, &dev->state))
+ if (!test_and_set_bit(__LINK_STATE_NOCARRIER, &dev->state)) {
+ if (dev->reg_state == NETREG_UNINITIALIZED)
+ return;
linkwatch_fire_event(dev);
+ }
}
EXPORT_SYMBOL(netif_carrier_off);
* clean when we restucture accept also.
*/
-long do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen, int flags)
+asmlinkage long sys_accept4(int fd, struct sockaddr __user *upeer_sockaddr,
+ int __user *upeer_addrlen, int flags)
{
struct socket *sock, *newsock;
struct file *newfile;
goto out_put;
}
-#if 0
-#ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen,
- const sigset_t __user *sigmask,
- size_t sigsetsize, int flags)
-{
- sigset_t ksigmask, sigsaved;
- int ret;
-
- if (sigmask) {
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
- if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask)))
- return -EFAULT;
-
- sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
- sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
- }
-
- ret = do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
-
- if (ret < 0 && signal_pending(current)) {
- /*
- * Don't restore the signal mask yet. Let do_signal() deliver
- * the signal on the way back to userspace, before the signal
- * mask is restored.
- */
- if (sigmask) {
- memcpy(¤t->saved_sigmask, &sigsaved,
- sizeof(sigsaved));
- set_restore_sigmask();
- }
- } else if (sigmask)
- sigprocmask(SIG_SETMASK, &sigsaved, NULL);
-
- return ret;
-}
-#else
-asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen,
- const sigset_t __user *sigmask,
- size_t sigsetsize, int flags)
-{
- /* The platform does not support restoring the signal mask in the
- * return path. So we do not allow using paccept() with a signal
- * mask. */
- if (sigmask)
- return -EINVAL;
-
- return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
-}
-#endif
-#endif
-
asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
int __user *upeer_addrlen)
{
- return do_accept(fd, upeer_sockaddr, upeer_addrlen, 0);
+ return sys_accept4(fd, upeer_sockaddr, upeer_addrlen, 0);
}
/*
AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
- AL(6)
+ AL(4)
};
#undef AL
unsigned long a0, a1;
int err;
- if (call < 1 || call > SYS_PACCEPT)
+ if (call < 1 || call > SYS_ACCEPT4)
return -EINVAL;
/* copy_from_user should be SMP safe. */
err = sys_listen(a0, a1);
break;
case SYS_ACCEPT:
- err =
- do_accept(a0, (struct sockaddr __user *)a1,
- (int __user *)a[2], 0);
+ err = sys_accept4(a0, (struct sockaddr __user *)a1,
+ (int __user *)a[2], 0);
break;
case SYS_GETSOCKNAME:
err =
case SYS_RECVMSG:
err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
break;
- case SYS_PACCEPT:
- err =
- sys_paccept(a0, (struct sockaddr __user *)a1,
- (int __user *)a[2],
- (const sigset_t __user *) a[3],
- a[4], a[5]);
+ case SYS_ACCEPT4:
+ err = sys_accept4(a0, (struct sockaddr __user *)a1,
+ (int __user *)a[2], a[3]);
break;
default:
err = -EINVAL;
generic_match(struct auth_cred *acred, struct rpc_cred *cred, int flags)
{
struct generic_cred *gcred = container_of(cred, struct generic_cred, gc_base);
+ int i;
if (gcred->acred.uid != acred->uid ||
gcred->acred.gid != acred->gid ||
- gcred->acred.group_info != acred->group_info ||
gcred->acred.machine_cred != acred->machine_cred)
- return 0;
+ goto out_nomatch;
+
+ /* Optimisation in the case where pointers are identical... */
+ if (gcred->acred.group_info == acred->group_info)
+ goto out_match;
+
+ /* Slow path... */
+ if (gcred->acred.group_info->ngroups != acred->group_info->ngroups)
+ goto out_nomatch;
+ for (i = 0; i < gcred->acred.group_info->ngroups; i++) {
+ if (GROUP_AT(gcred->acred.group_info, i) !=
+ GROUP_AT(acred->group_info, i))
+ goto out_nomatch;
+ }
+out_match:
return 1;
+out_nomatch:
+ return 0;
}
void __init rpc_init_generic_auth(void)
# print STDERR "parameter def '$1' = '$contents'\n";
$name = $1;
$parameterdescs{$name} = $contents;
+ } elsif ($name eq "@\.\.\.") {
+# print STDERR "parameter def '...' = '$contents'\n";
+ $name = "...";
+ $parameterdescs{$name} = $contents;
} else {
# print STDERR "other section '$name' = '$contents'\n";
if (defined($sections{$name}) && ($sections{$name} ne "")) {
if ($type eq "" && $param =~ /\.\.\.$/)
{
- $type="";
- $parameterdescs{$param} = "variable arguments";
+ if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
+ $parameterdescs{$param} = "variable arguments";
+ }
}
elsif ($type eq "" && ($param eq "" or $param eq "void"))
{
- $type="";
$param="void";
$parameterdescs{void} = "no arguments";
}
container_of(work, struct hda_beep, beep_work);
struct hda_codec *codec = beep->codec;
+ if (!beep->enabled)
+ return;
+
/* generate tone */
snd_hda_codec_write_cache(codec, beep->nid, 0,
AC_VERB_SET_BEEP_CONTROL, beep->tone);
snprintf(beep->phys, sizeof(beep->phys),
"card%d/codec#%d/beep0", codec->bus->card->number, codec->addr);
input_dev = input_allocate_device();
+ if (!input_dev) {
+ kfree(beep);
+ return -ENOMEM;
+ }
/* setup digital beep device */
input_dev->name = "HDA Digital PCBeep";
beep->nid = nid;
beep->dev = input_dev;
beep->codec = codec;
+ beep->enabled = 1;
codec->beep = beep;
INIT_WORK(&beep->beep_work, &snd_hda_generate_beep);
char phys[32];
int tone;
int nid;
+ int enabled;
struct work_struct beep_work; /* scheduled task for beep event */
};
{
hda_nid_t *d;
- snd_hda_codec_write(codec, nid, 0, verb, val);
+ snd_hda_codec_write_cache(codec, nid, 0, verb, val);
d = codec->slave_dig_outs;
if (!d)
return;
for (; *d; d++)
- snd_hda_codec_write(codec, *d, 0, verb, val);
+ snd_hda_codec_write_cache(codec, *d, 0, verb, val);
}
static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
#include "hda_beep.h"
#define NUM_CONTROL_ALLOC 32
+
+#define STAC_VREF_EVENT 0x00
+#define STAC_INSERT_EVENT 0x10
#define STAC_PWR_EVENT 0x20
#define STAC_HP_EVENT 0x30
-#define STAC_VREF_EVENT 0x40
enum {
STAC_REF,
enum {
STAC_92HD73XX_REF,
- STAC_DELL_M6,
+ STAC_DELL_M6_AMIC,
+ STAC_DELL_M6_DMIC,
+ STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
STAC_92HD73XX_MODELS
};
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
STAC_DELL_M4_2,
+ STAC_DELL_M4_3,
STAC_HP_M4,
STAC_92HD71BXX_MODELS
};
unsigned int num_mixers;
int board_config;
+ unsigned int eapd_switch: 1;
unsigned int surr_switch: 1;
unsigned int line_switch: 1;
unsigned int mic_switch: 1;
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
- [STAC_DELL_M6] = dell_m6_pin_configs,
+ [STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = "ref",
- [STAC_DELL_M6] = "dell-m6",
+ [STAC_DELL_M6_AMIC] = "dell-m6-amic",
+ [STAC_DELL_M6_DMIC] = "dell-m6-dmic",
+ [STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
};
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
- "unknown Dell", STAC_DELL_M6),
+ "Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272,
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+ "Dell Studio 1537", STAC_DELL_M6_DMIC),
{} /* terminator */
};
0x40f000f0, 0x044413b0, 0x044413b0,
};
+static unsigned int dell_m4_3_pin_configs[11] = {
+ 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+ 0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
[STAC_DELL_M4_1] = dell_m4_1_pin_configs,
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
+ [STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
};
[STAC_92HD71BXX_REF] = "ref",
[STAC_DELL_M4_1] = "dell-m4-1",
[STAC_DELL_M4_2] = "dell-m4-2",
+ [STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
};
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD71BXX_REF),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2,
+ "HP dv5", STAC_HP_M4),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
+ "HP dv7", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
"unknown HP", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
"unknown Dell", STAC_DELL_M4_2),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
"unknown Dell", STAC_DELL_M4_2),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+ "unknown Dell", STAC_DELL_M4_3),
{} /* terminator */
};
};
/* add dynamic controls */
-static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type,
- int idx, const char *name, unsigned long val)
+static int stac92xx_add_control_temp(struct sigmatel_spec *spec,
+ struct snd_kcontrol_new *ktemp,
+ int idx, const char *name,
+ unsigned long val)
{
struct snd_kcontrol_new *knew;
}
knew = &spec->kctl_alloc[spec->num_kctl_used];
- *knew = stac92xx_control_templates[type];
+ *knew = *ktemp;
knew->index = idx;
knew->name = kstrdup(name, GFP_KERNEL);
- if (! knew->name)
+ if (!knew->name)
return -ENOMEM;
knew->private_value = val;
spec->num_kctl_used++;
return 0;
}
+static inline int stac92xx_add_control_idx(struct sigmatel_spec *spec,
+ int type, int idx, const char *name,
+ unsigned long val)
+{
+ return stac92xx_add_control_temp(spec,
+ &stac92xx_control_templates[type],
+ idx, name, val);
+}
+
/* add dynamic controls */
-static int stac92xx_add_control(struct sigmatel_spec *spec, int type,
- const char *name, unsigned long val)
+static inline int stac92xx_add_control(struct sigmatel_spec *spec, int type,
+ const char *name, unsigned long val)
{
return stac92xx_add_control_idx(spec, type, 0, name, val);
}
cfg->hp_outs && !spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
- if (cfg->hp_outs > 1) {
+ if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_HP_SWITCH,
"Headphone as Line Out Switch",
return 0;
}
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+#define stac92xx_dig_beep_switch_info snd_ctl_boolean_mono_info
+
+static int stac92xx_dig_beep_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] = codec->beep->enabled;
+ return 0;
+}
+
+static int stac92xx_dig_beep_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int enabled = !!ucontrol->value.integer.value[0];
+ if (codec->beep->enabled != enabled) {
+ codec->beep->enabled = enabled;
+ return 1;
+ }
+ return 0;
+}
+
+static struct snd_kcontrol_new stac92xx_dig_beep_ctrl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = stac92xx_dig_beep_switch_info,
+ .get = stac92xx_dig_beep_switch_get,
+ .put = stac92xx_dig_beep_switch_put,
+};
+
+static int stac92xx_beep_switch_ctl(struct hda_codec *codec)
+{
+ return stac92xx_add_control_temp(codec->spec, &stac92xx_dig_beep_ctrl,
+ 0, "PC Beep Playback Switch", 0);
+}
+#endif
+
static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
#ifdef CONFIG_SND_HDA_INPUT_BEEP
if (spec->digbeep_nid > 0) {
hda_nid_t nid = spec->digbeep_nid;
+ unsigned int caps;
err = stac92xx_auto_create_beep_ctls(codec, nid);
if (err < 0)
err = snd_hda_attach_beep_device(codec, nid);
if (err < 0)
return err;
+ /* if no beep switch is available, make its own one */
+ caps = query_amp_caps(codec, nid, HDA_OUTPUT);
+ if (codec->beep &&
+ !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) {
+ err = stac92xx_beep_switch_ctl(codec);
+ if (err < 0)
+ return err;
+ }
}
#endif
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
}
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable);
+
static int stac92xx_init(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int gpio;
int i;
snd_hda_sequence_write(codec, spec->init);
snd_hda_codec_write_cache(codec,
spec->adc_nids[i], 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+ /* set up GPIO */
+ gpio = spec->gpio_data;
+ /* turn on EAPD statically when spec->eapd_switch isn't set.
+ * otherwise, unsol event will turn it on/off dynamically
+ */
+ if (!spec->eapd_switch)
+ gpio |= spec->eapd_mask;
+ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio);
+
/* set up pins */
if (spec->hp_detect) {
/* Enable unsolicited responses on the HP widget */
for (i = 0; i < spec->num_dmics; i++)
stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
AC_PINCTL_IN_EN);
+ if (cfg->dig_out_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+ AC_PINCTL_OUT_EN);
+ if (cfg->dig_in_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
+ AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
- int event = is_nid_hp_pin(cfg, spec->pwr_nids[i])
- ? STAC_HP_EVENT : STAC_PWR_EVENT;
- int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
- def_conf = get_defcfg_connect(def_conf);
+ hda_nid_t nid = spec->pwr_nids[i];
+ int pinctl, def_conf;
+ int event = STAC_PWR_EVENT;
+
+ if (is_nid_hp_pin(cfg, nid) && spec->hp_detect)
+ continue; /* already has an unsol event */
+
+ pinctl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* outputs are only ports capable of power management
* any attempts on powering down a input port cause the
* referenced VREF to act quirky.
*/
if (pinctl & AC_PINCTL_IN_EN)
continue;
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ def_conf = get_defcfg_connect(def_conf);
/* skip any ports that don't have jacks since presence
* detection is useless */
- if (def_conf && def_conf != AC_JACK_PORT_FIXED)
+ if (def_conf != AC_JACK_PORT_COMPLEX) {
+ if (def_conf != AC_JACK_PORT_NONE)
+ stac_toggle_power_map(codec, nid, 1);
continue;
+ }
enable_pin_detect(codec, spec->pwr_nids[i], event | i);
codec->patch_ops.unsol_event(codec, (event | i) << 26);
}
if (spec->dac_list)
stac92xx_power_down(codec);
- if (cfg->dig_out_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
- AC_PINCTL_OUT_EN);
- if (cfg->dig_in_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
- AC_PINCTL_IN_EN);
-
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
-
return 0;
}
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
}
}
-static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->pwr_nids[idx];
- int presence, val;
- val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
- & 0x000000ff;
- presence = get_hp_pin_presence(codec, nid);
+ unsigned int idx, val;
+
+ for (idx = 0; idx < spec->num_pwrs; idx++) {
+ if (spec->pwr_nids[idx] == nid)
+ break;
+ }
+ if (idx >= spec->num_pwrs)
+ return;
/* several codecs have two power down bits */
if (spec->pwr_mapping)
else
idx = 1 << idx;
- if (presence)
+ val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
+ if (enable)
val &= ~idx;
else
val |= idx;
/* power down unused output ports */
snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val);
-};
+}
+
+static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+ stac_toggle_power_map(codec, nid, get_hp_pin_presence(codec, nid));
+}
static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
{
case STAC_DELL_EQ:
spec->init = dell_eq_core_init;
/* fallthru */
- case STAC_DELL_M6:
+ case STAC_DELL_M6_AMIC:
+ case STAC_DELL_M6_DMIC:
+ case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
+ spec->eapd_switch = 0;
spec->num_amps = 1;
if (!spec->init)
spec->init = dell_m6_core_init;
- switch (codec->subsystem_id) {
- case 0x1028025e: /* Analog Mics */
- case 0x1028025f:
+ switch (spec->board_config) {
+ case STAC_DELL_M6_AMIC: /* Analog Mics */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
spec->private_dimux.num_items = 1;
break;
- case 0x10280271: /* Digital Mics */
- case 0x10280272:
- case 0x10280254:
- case 0x10280255:
+ case STAC_DELL_M6_DMIC: /* Digital Mics */
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
spec->private_dimux.num_items = 2;
break;
- case 0x10280256: /* Both */
- case 0x10280057:
+ case STAC_DELL_M6_BOTH: /* Both */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 1;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state)
{
+ struct sigmatel_spec *spec = codec->spec;
+
stac92hd71xx_set_power_state(codec, AC_PWRST_D3);
+ if (spec->eapd_mask)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
return 0;
};
stac92xx_set_config_regs(codec);
}
+ if (spec->board_config > STAC_92HD71BXX_REF) {
+ /* GPIO0 = EAPD */
+ spec->gpio_mask = 0x01;
+ spec->gpio_dir = 0x01;
+ spec->gpio_data = 0x01;
+ }
+
switch (codec->vendor_id) {
case 0x111d76b6: /* 4 Port without Analog Mixer */
case 0x111d76b7:
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
break;
case 0x111d7608: /* 5 Port with Analog Mixer */
- switch (codec->subsystem_id) {
- case 0x103c361a:
+ switch (spec->board_config) {
+ case STAC_HP_M4:
/* Enable VREF power saving on GPIO1 detect */
- snd_hda_codec_write(codec, codec->afg, 0,
+ snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02);
snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
spec->aloopback_mask = 0x50;
spec->aloopback_shift = 0;
- if (spec->board_config > STAC_92HD71BXX_REF) {
- /* GPIO0 = EAPD */
- spec->gpio_mask = 0x01;
- spec->gpio_dir = 0x01;
- spec->gpio_data = 0x01;
- }
-
spec->powerdown_adcs = 1;
spec->digbeep_nid = 0x26;
spec->mux_nids = stac92hd71bxx_mux_nids;
switch (spec->board_config) {
case STAC_HP_M4:
- spec->num_dmics = 0;
- spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
-
/* enable internal microphone */
stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
stac92xx_auto_set_pinctl(codec, 0x0e,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+ /* fallthru */
+ case STAC_DELL_M4_2:
+ spec->num_dmics = 0;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
+ break;
+ case STAC_DELL_M4_1:
+ case STAC_DELL_M4_3:
+ spec->num_dmics = 1;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
spec->num_pwrs = 0;
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
if (!err) {
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
spec->multiout.dac_nids = spec->dac_nids;
switch (spec->board_config){
stac92xx_set_config_reg(codec, 0x20, 0x1c410030);
/* Enable unsol response for GPIO4/Dock HP connection */
- snd_hda_codec_write(codec, codec->afg, 0,
+ snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x10);
snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
return -ENOMEM;
}
- if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST))
+ if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) {
+ kfree(mgr);
+ pci_disable_device(pci);
return -ENODEV;
+ }
card_name = pcxhr_board_params[pci_id->driver_data].board_name;
mgr->playback_chips = pcxhr_board_params[pci_id->driver_data].playback_chips;
mgr->capture_chips = pcxhr_board_params[pci_id->driver_data].capture_chips;
config SND_SOC_MPC5200_I2S
tristate "Freescale MPC5200 PSC in I2S mode driver"
+ depends on SND_SOC && PPC_MPC52xx && PPC_BESTCOMM
select SND_SOC_OF_SIMPLE
- depends on SND_SOC && PPC_MPC52xx
+ select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in I2S mode.
void unregister_sound_midi(int unit)
{
- return sound_remove_unit(&chains[2], unit);
+ sound_remove_unit(&chains[2], unit);
}
EXPORT_SYMBOL(unregister_sound_midi);
void unregister_sound_dsp(int unit)
{
- return sound_remove_unit(&chains[3], unit);
+ sound_remove_unit(&chains[3], unit);
}
return NULL;
}
-int soundcore_open(struct inode *inode, struct file *file)
+static int soundcore_open(struct inode *inode, struct file *file)
{
int chain;
int unit = iminor(inode);
git.openpandora.org / pandora-kernel.git / commitdiff