#include <linux/gpio.h>
#include <linux/spi/spi.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/spi-ep93xx.h>
/* this is our GPIO line used for chip select */
#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
+config NEED_MACH_GPIO_H
+ bool
+ help
+ Select this when mach/gpio.h is required to provide special
+ definitions for this platform. The need for mach/gpio.h should
+ be avoided when possible.
+
config NEED_MACH_IO_H
bool
help
#
choice
prompt "ARM system type"
- default ARCH_VERSATILE
+ default ARCH_MULTIPLATFORM
-config ARCH_SOCFPGA
- bool "Altera SOCFPGA family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_GIC
- select CACHE_L2X0
- select CLKDEV_LOOKUP
+config ARCH_MULTIPLATFORM
+ bool "Allow multiple platforms to be selected"
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
select COMMON_CLK
- select CPU_V7
- select DW_APB_TIMER
- select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
- select GPIO_PL061 if GPIOLIB
- select HAVE_ARM_SCU
+ select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
- help
- This enables support for Altera SOCFPGA Cyclone V platform
+ depends on MMU
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
help
This enables support for ARM Ltd Versatile board.
-config ARCH_VEXPRESS
- bool "ARM Ltd. Versatile Express family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select HAVE_PATA_PLATFORM
- select ICST
- select NO_IOPORT
- select PLAT_VERSATILE
- select PLAT_VERSATILE_CLCD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- This enables support for the ARM Ltd Versatile Express boards.
-
config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
select IRQ_DOMAIN
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
help
This enables support for systems based on Atmel
This enables support for the Broadcom BCM2835 SoC. This SoC is
use in the Raspberry Pi, and Roku 2 devices.
-config ARCH_HIGHBANK
- bool "Calxeda Highbank-based"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_GIC
- select ARM_TIMER_SP804
- select CACHE_L2X0
- select CLKDEV_LOOKUP
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU
- select HAVE_SMP
- select SPARSE_IRQ
- select USE_OF
- help
- Support for the Calxeda Highbank SoC based boards.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select CPU_ARM720T
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_GPIO_H
+ select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_GPIO_H
+ select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
-config ARCH_MVEBU
- bool "Marvell SOCs with Device Tree support"
- select GENERIC_CLOCKEVENTS
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
- select CLKSRC_MMIO
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- select COMMON_CLK
- help
- Support for the Marvell SoC Family with device tree support
-
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
select PLAT_PXA
select SPARSE_IRQ
select GENERIC_ALLOCATOR
+ select NEED_MACH_GPIO_H
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
-config ARCH_PICOXCELL
- bool "Picochip picoXcell"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_PATCH_PHYS_VIRT
- select ARM_VIC
- select CPU_V6K
- select DW_APB_TIMER
- select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
- select HAVE_TCM
- select NO_IOPORT
- select SPARSE_IRQ
- select USE_OF
- help
- This enables support for systems based on the Picochip picoXcell
- family of Femtocell devices. The picoxcell support requires device tree
- for all boards.
-
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select MULTI_IRQ_HANDLER
select ARM_CPU_SUSPEND if PM
select HAVE_IDE
+ select NEED_MACH_GPIO_H
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
help
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
help
Samsung S3C64XX series based systems
select GENERIC_CLOCKEVENTS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
+ select NEED_MACH_GPIO_H
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
help
Samsung S5PC100 series based systems
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
select ARCH_HAS_HOLES_MEMORYMODEL
+ select NEED_MACH_GPIO_H
help
Support for TI's DaVinci platform.
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
+ select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
+menu "Multiple platform selection"
+ depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+ bool "ARMv4 based platforms (FA526, StrongARM)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4T
+ bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V5
+ bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4_V5
+ bool
+
+config ARCH_MULTI_V6
+ bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ select CPU_V6
+ select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V7
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ select CPU_V7
+ select ARCH_VEXPRESS
+ default y
+ select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V6_V7
+ bool
+
+config ARCH_MULTI_CPU_AUTO
+ def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+ select ARCH_MULTI_V5
+
+endmenu
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-highbank/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-picoxcell/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/mach-socfpga/Kconfig"
+
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM && !ARM_LPAE
+ depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_MVEBU_UART
+ bool "Kernel low-level debugging messages via MVEBU UART"
+ depends on ARCH_MVEBU
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MVEBU based platforms.
+
+ config DEBUG_PICOXCELL_UART
+ depends on ARCH_PICOXCELL
+ bool "Use PicoXcell UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on PicoXcell based platforms.
+
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_SOCFPGA_UART
+ depends on ARCH_SOCFPGA
+ bool "Use SOCFPGA UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA based platforms.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
+ depends on !ARCH_MULTIPLATFORM
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
endchoice
+config DEBUG_LL_INCLUDE
+ string
+ default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+ default "debug/mvebu.S" if DEBUG_MVEBU_UART
+ default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+ default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
+ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+ default "mach/debug-macro.S"
+
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_AT91) := at91
-machine-$(CONFIG_ARCH_BCM2835) := bcm2835
-machine-$(CONFIG_ARCH_CLPS711X) := clps711x
-machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
-machine-$(CONFIG_ARCH_DAVINCI) := davinci
-machine-$(CONFIG_ARCH_DOVE) := dove
-machine-$(CONFIG_ARCH_EBSA110) := ebsa110
-machine-$(CONFIG_ARCH_EP93XX) := ep93xx
-machine-$(CONFIG_ARCH_GEMINI) := gemini
-machine-$(CONFIG_ARCH_H720X) := h720x
-machine-$(CONFIG_ARCH_HIGHBANK) := highbank
-machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
-machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
-machine-$(CONFIG_ARCH_IOP32X) := iop32x
-machine-$(CONFIG_ARCH_IOP33X) := iop33x
-machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
-machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
-machine-$(CONFIG_ARCH_KS8695) := ks8695
-machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
-machine-$(CONFIG_ARCH_MMP) := mmp
-machine-$(CONFIG_ARCH_MSM) := msm
-machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
-machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
-machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
-machine-$(CONFIG_ARCH_MXS) := mxs
-machine-$(CONFIG_ARCH_MVEBU) := mvebu
-machine-$(CONFIG_ARCH_NETX) := netx
-machine-$(CONFIG_ARCH_NOMADIK) := nomadik
-machine-$(CONFIG_ARCH_OMAP1) := omap1
-machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
-machine-$(CONFIG_ARCH_ORION5X) := orion5x
-machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
-machine-$(CONFIG_ARCH_PRIMA2) := prima2
-machine-$(CONFIG_ARCH_PXA) := pxa
-machine-$(CONFIG_ARCH_REALVIEW) := realview
-machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440
-machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
-machine-$(CONFIG_ARCH_S5PC100) := s5pc100
-machine-$(CONFIG_ARCH_S5PV210) := s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4) := exynos
-machine-$(CONFIG_ARCH_EXYNOS5) := exynos
-machine-$(CONFIG_ARCH_SA1100) := sa1100
-machine-$(CONFIG_ARCH_SHARK) := shark
-machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_TEGRA) := tegra
-machine-$(CONFIG_ARCH_U300) := u300
-machine-$(CONFIG_ARCH_U8500) := ux500
-machine-$(CONFIG_ARCH_VERSATILE) := versatile
-machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
-machine-$(CONFIG_ARCH_VT8500) := vt8500
-machine-$(CONFIG_ARCH_W90X900) := w90x900
-machine-$(CONFIG_FOOTBRIDGE) := footbridge
-machine-$(CONFIG_ARCH_SOCFPGA) := socfpga
-machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
-machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
-machine-$(CONFIG_MACH_SPEAR300) := spear3xx
-machine-$(CONFIG_MACH_SPEAR310) := spear3xx
-machine-$(CONFIG_MACH_SPEAR320) := spear3xx
-machine-$(CONFIG_MACH_SPEAR600) := spear6xx
-machine-$(CONFIG_ARCH_ZYNQ) := zynq
+machine-$(CONFIG_ARCH_AT91) += at91
+machine-$(CONFIG_ARCH_BCM2835) += bcm2835
+machine-$(CONFIG_ARCH_CLPS711X) += clps711x
+machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
+machine-$(CONFIG_ARCH_DAVINCI) += davinci
+machine-$(CONFIG_ARCH_DOVE) += dove
+machine-$(CONFIG_ARCH_EBSA110) += ebsa110
+machine-$(CONFIG_ARCH_EP93XX) += ep93xx
+machine-$(CONFIG_ARCH_GEMINI) += gemini
+machine-$(CONFIG_ARCH_H720X) += h720x
+machine-$(CONFIG_ARCH_HIGHBANK) += highbank
+machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
+machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
+machine-$(CONFIG_ARCH_IOP32X) += iop32x
+machine-$(CONFIG_ARCH_IOP33X) += iop33x
+machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
+machine-$(CONFIG_ARCH_KS8695) += ks8695
+machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
+machine-$(CONFIG_ARCH_MMP) += mmp
+machine-$(CONFIG_ARCH_MSM) += msm
+machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
+machine-$(CONFIG_ARCH_MXC) += imx
+machine-$(CONFIG_ARCH_MXS) += mxs
+machine-$(CONFIG_ARCH_MVEBU) += mvebu
+machine-$(CONFIG_ARCH_NETX) += netx
+machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_OMAP1) += omap1
+machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
+machine-$(CONFIG_ARCH_ORION5X) += orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
+machine-$(CONFIG_ARCH_PRIMA2) += prima2
+machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_REALVIEW) += realview
+machine-$(CONFIG_ARCH_RPC) += rpc
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
+machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
+machine-$(CONFIG_ARCH_S5PC100) += s5pc100
+machine-$(CONFIG_ARCH_S5PV210) += s5pv210
+machine-$(CONFIG_ARCH_EXYNOS) += exynos
+machine-$(CONFIG_ARCH_SA1100) += sa1100
+machine-$(CONFIG_ARCH_SHARK) += shark
+machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
+machine-$(CONFIG_ARCH_TEGRA) += tegra
+machine-$(CONFIG_ARCH_U300) += u300
+machine-$(CONFIG_ARCH_U8500) += ux500
+machine-$(CONFIG_ARCH_VERSATILE) += versatile
+machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
+machine-$(CONFIG_ARCH_VT8500) += vt8500
+machine-$(CONFIG_ARCH_W90X900) += w90x900
+machine-$(CONFIG_FOOTBRIDGE) += footbridge
+machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
+machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
+machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
+machine-$(CONFIG_MACH_SPEAR600) += spear6xx
+machine-$(CONFIG_ARCH_ZYNQ) += zynq
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC) := mxc
-plat-$(CONFIG_ARCH_OMAP) := omap
-plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_ZYNQ) := versatile
-plat-$(CONFIG_PLAT_IOP) := iop
-plat-$(CONFIG_PLAT_NOMADIK) := nomadik
-plat-$(CONFIG_PLAT_ORION) := orion
-plat-$(CONFIG_PLAT_PXA) := pxa
-plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P) := samsung
-plat-$(CONFIG_PLAT_SPEAR) := spear
-plat-$(CONFIG_PLAT_VERSATILE) := versatile
+plat-$(CONFIG_ARCH_MXC) += mxc
+plat-$(CONFIG_ARCH_OMAP) += omap
+plat-$(CONFIG_ARCH_S3C64XX) += samsung
+plat-$(CONFIG_ARCH_ZYNQ) += versatile
+plat-$(CONFIG_PLAT_IOP) += iop
+plat-$(CONFIG_PLAT_NOMADIK) += nomadik
+plat-$(CONFIG_PLAT_ORION) += orion
+plat-$(CONFIG_PLAT_PXA) += pxa
+plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung
+plat-$(CONFIG_PLAT_S5P) += samsung
+plat-$(CONFIG_PLAT_SPEAR) += spear
+plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
else
MACHINE :=
endif
+ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+MACHINE :=
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
else
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
endif
+endif
export TEXT_OFFSET GZFLAGS MMUEXT
include $(srctree)/$(MACHINE)/Makefile.boot
endif
+include $(srctree)/arch/arm/boot/dts/Makefile
+
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
static void putstr(const char *ptr);
extern void error(char *x);
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+static inline void putc(int c) {}
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
+#else
#include <mach/uncompress.h>
+#endif
#ifdef CONFIG_DEBUG_ICEDCC
--- /dev/null
+ifeq ($(CONFIG_OF),y)
+
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
+ at91sam9263ek.dtb \
+ at91sam9g20ek_2mmc.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9m10g45ek.dtb \
+ at91sam9n12ek.dtb \
+ ethernut5.dtb \
+ evk-pro3.dtb \
+ kizbox.dtb \
+ tny_a9260.dtb \
+ tny_a9263.dtb \
+ tny_a9g20.dtb \
+ usb_a9260.dtb \
+ usb_a9263.dtb \
+ usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+ exynos4210-smdkv310.dtb \
+ exynos4210-trats.dtb \
+ exynos5250-smdk5250.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
+ imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dreamplug.dtb \
+ kirkwood-goflexnet.dtb \
+ kirkwood-ib62x0.dtb \
+ kirkwood-iconnect.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-lsxhl.dtb \
+ kirkwood-ts219-6281.dtb \
+ kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+ msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+ armada-xp-db.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+ imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb \
+ imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+ imx23-olinuxino.dtb \
+ imx23-stmp378x_devb.dtb \
+ imx28-apx4devkit.dtb \
+ imx28-cfa10036.dtb \
+ imx28-cfa10049.dtb \
+ imx28-evk.dtb \
+ imx28-m28evk.dtb \
+ imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+ omap3-beagle-xm.dtb \
+ omap3-evm.dtb \
+ omap3-tobi.dtb \
+ omap4-panda.dtb \
+ omap4-pandaES.dtb \
+ omap4-var_som.dtb \
+ omap4-sdp.dtb \
+ omap5-evm.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+ r8a7740-armadillo800eva.dtb \
+ sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+ spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+ spear310-evb.dtb \
+ spear320-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-medcom-wide.dtb \
+ tegra20-paz00.dtb \
+ tegra20-plutux.dtb \
+ tegra20-seaboard.dtb \
+ tegra20-tec.dtb \
+ tegra20-trimslice.dtb \
+ tegra20-ventana.dtb \
+ tegra20-whistler.dtb \
+ tegra30-cardhu-a02.dtb \
+ tegra30-cardhu-a04.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+ vexpress-v2p-ca9.dtb \
+ vexpress-v2p-ca15-tc1.dtb \
+ vexpress-v2p-ca15_a7.dtb
+
+endif
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_SOCFPGA=y
+# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_ATA=y
+CONFIG_SATA_HIGHBANK=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_SI=y
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_HIGHBANK_MC=y
+CONFIG_EDAC_HIGHBANK_L2=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
#endif
/* not all ARM platforms necessarily support this API ... */
+#ifdef CONFIG_NEED_MACH_GPIO_H
#include <mach/gpio.h>
+#endif
#ifndef __ARM_GPIOLIB_COMPLEX
/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
struct meminfo;
struct sys_timer;
struct pt_regs;
+struct smp_operations;
+#ifdef CONFIG_SMP
+#define smp_ops(ops) (&(ops))
+#else
+#define smp_ops(ops) (struct smp_operations *)NULL
+#endif
struct machine_desc {
unsigned int nr; /* architecture number */
unsigned char reserve_lp1 :1; /* never has lp1 */
unsigned char reserve_lp2 :1; /* never has lp2 */
char restart_mode; /* default restart mode */
+ struct smp_operations *smp; /* SMP operations */
void (*fixup)(struct tag *, char **,
struct meminfo *);
void (*reserve)(void);/* reserve mem blocks */
*/
asmlinkage void secondary_start_kernel(void);
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initialize cpu_possible map, and enable coherency
- */
-extern void platform_smp_prepare_cpus(unsigned int);
/*
* Initial data for bringing up a secondary CPU.
void *stack;
};
extern struct secondary_data secondary_data;
+extern volatile int pen_release;
extern int __cpu_disable(void);
-extern int platform_cpu_disable(unsigned int cpu);
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void);
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+struct smp_operations {
+#ifdef CONFIG_SMP
+ /*
+ * Setup the set of possible CPUs (via set_cpu_possible)
+ */
+ void (*smp_init_cpus)(void);
+ /*
+ * Initialize cpu_possible map, and enable coherency
+ */
+ void (*smp_prepare_cpus)(unsigned int max_cpus);
+
+ /*
+ * Perform platform specific initialisation of the specified CPU.
+ */
+ void (*smp_secondary_init)(unsigned int cpu);
+ /*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+ int (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle);
+#ifdef CONFIG_HOTPLUG_CPU
+ int (*cpu_kill)(unsigned int cpu);
+ void (*cpu_die)(unsigned int cpu);
+ int (*cpu_disable)(unsigned int cpu);
+#endif
+#endif
+};
+
+/*
+ * set platform specific SMP operations
+ */
+extern void smp_set_ops(struct smp_operations *);
+
#endif /* ifndef __ASM_ARM_SMP_H */
#define _ASMARM_TIMEX_H
#include <asm/arch_timer.h>
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+#define CLOCK_TICK_RATE 1000000
+#else
#include <mach/timex.h>
+#endif
typedef unsigned long cycles_t;
*/
.macro addruart,rp,rv,tmp
- movw \rv, #0x6000
- movt \rv, #0xfee3
- movw \rp, #0x6000
- movt \rp, #0xfff3
+ ldr \rv, =0xfee36000
+ ldr \rp, =0xfff36000
.endm
#include <asm/hardware/debug-pl01x.S>
--- /dev/null
+/*
+ * arch/arm/include/debug/icedcc.S
+ *
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ @@ debug using ARM EmbeddedICE DCC channel
+
+ .macro addruart, rp, rv, tmp
+ .endm
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ bne 1001b
+1002:
+ .endm
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c8, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x10000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ bne 1001b
+1002:
+ .endm
+
+#else
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c1, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c0, 0
+ tst \rx, #2
+ beq 1001b
+
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c0, 0
+ tst \rx, #2
+ bne 1001b
+1002:
+ .endm
+
+#endif /* CONFIG_CPU_V6 */
* published by the Free Software Foundation.
*/
-#include <mach/armada-370-xp.h>
+#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
.macro addruart, rp, rv, tmp
ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE
* accesses to the 8250.
*/
#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
#define UART_SHIFT 2
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
.macro addruart, rp, rv, tmp
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
* references to these in a production kernel!
*/
-#if defined(CONFIG_DEBUG_ICEDCC)
- @@ debug using ARM EmbeddedICE DCC channel
-
- .macro addruart, rp, rv, tmp
- .endm
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c0, c5, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c0, c1, 0
- tst \rx, #0x20000000
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x2000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c0, c1, 0
- tst \rx, #0x20000000
- bne 1001b
-1002:
- .endm
-
-#elif defined(CONFIG_CPU_XSCALE)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c8, c0, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c14, c0, 0
- tst \rx, #0x10000000
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x10000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c14, c0, 0
- tst \rx, #0x10000000
- bne 1001b
-1002:
- .endm
-
-#else
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c1, c0, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c0, c0, 0
- tst \rx, #2
- beq 1001b
-
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x2000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c0, c0, 0
- tst \rx, #2
- bne 1001b
-1002:
- .endm
-
-#endif /* CONFIG_CPU_V6 */
-
-#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include <mach/debug-macro.S>
-#endif /* CONFIG_DEBUG_ICEDCC */
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
#include <asm/thread_info.h>
#include <asm/pgtable.h>
-#ifdef CONFIG_DEBUG_LL
-#include <mach/debug-macro.S>
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
#endif
/*
unflatten_device_tree();
#ifdef CONFIG_SMP
- if (is_smp())
+ if (is_smp()) {
+ smp_set_ops(mdesc->smp);
smp_init_cpus();
+ }
#endif
reserve_crashkernel();
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
-#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <linux/percpu.h>
#include <linux/completion.h>
#include <linux/atomic.h>
+#include <asm/smp.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
+#include <asm/mach/arch.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
*/
struct secondary_data secondary_data;
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
enum ipi_msg_type {
IPI_TIMER = 2,
IPI_RESCHEDULE,
static DECLARE_COMPLETION(cpu_running);
+static struct smp_operations smp_ops;
+
+void __init smp_set_ops(struct smp_operations *ops)
+{
+ if (ops)
+ smp_ops = *ops;
+};
+
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
return ret;
}
+/* platform specific SMP operations */
+void __init smp_init_cpus(void)
+{
+ if (smp_ops.smp_init_cpus)
+ smp_ops.smp_init_cpus();
+}
+
+static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ if (smp_ops.smp_prepare_cpus)
+ smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ if (smp_ops.smp_secondary_init)
+ smp_ops.smp_secondary_init(cpu);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (smp_ops.smp_boot_secondary)
+ return smp_ops.smp_boot_secondary(cpu, idle);
+ return -ENOSYS;
+}
+
#ifdef CONFIG_HOTPLUG_CPU
static void percpu_timer_stop(void);
+static int platform_cpu_kill(unsigned int cpu)
+{
+ if (smp_ops.cpu_kill)
+ return smp_ops.cpu_kill(cpu);
+ return 1;
+}
+
+static void platform_cpu_die(unsigned int cpu)
+{
+ if (smp_ops.cpu_die)
+ smp_ops.cpu_die(cpu);
+}
+
+static int platform_cpu_disable(unsigned int cpu)
+{
+ if (smp_ops.cpu_disable)
+ return smp_ops.cpu_disable(cpu);
+
+ /*
+ * By default, allow disabling all CPUs except the first one,
+ * since this is special on a lot of platforms, e.g. because
+ * of clock tick interrupts.
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
/*
* __cpu_disable runs on the processor to be shutdown.
*/
-int __cpu_disable(void)
+int __cpuinit __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
int ret;
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
-void __cpu_die(unsigned int cpu)
+void __cpuinit __cpu_die(unsigned int cpu)
{
if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
pr_err("CPU%u: cpu didn't die\n", cpu);
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9260
-dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
-# sam9263
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9n12
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
#include <media/atmel-isi.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#include "generic.h"
#ifndef __MACH_ATMEL_MCI_H
#define __MACH_ATMEL_MCI_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
/**
* struct mci_dma_data - DMA data for MCI interface
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-y += bcm2835-rpi-b.dtb
#include <linux/module.h>
#include <linux/time.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
/* Timing value configuration */
#include <mach/cp_intc.h>
#include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#define DA830_EVM_PHY_ID ""
/*
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <mach/mux.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
#include <media/tvp514x.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include <mach/common.h>
#include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/clock.h>
#include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include "clock.h"
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#define MITYOMAPL138_PHY_ID ""
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <asm/mach/flash.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
#include <linux/spi/spi.h>
#include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
#include <mach/hardware.h>
#include <media/davinci/vpfe_capture.h>
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
#include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
#include <mach/time.h>
#include "davinci.h"
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
#include <mach/serial.h>
#include <mach/edma.h>
-#include <mach/i2c.h>
#include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/ti_ssp.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/serial.h>
struct tnetv107x_device_info {
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
+++ /dev/null
-/*
- * arch/arm/mach-dove/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include "common.h"
static void pmu_irq_mask(struct irq_data *d)
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/dove.h>
+#include <plat/orion-gpio.h>
#include "mpp.h"
struct dove_mpp_grp {
#include <linux/export.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include "soc.h"
#include <sound/cs4271.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
+++ /dev/null
-/* empty */
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <linux/mtd/nand.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
-
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb
-dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
extern struct sys_timer exynos4_timer;
+struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
void exynos5_init_irq(void);
#define exynos4212_register_clocks()
#endif
+extern struct smp_operations exynos_smp_ops;
+
+extern void exynos_cpu_die(unsigned int cpu);
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <plat/devs.h>
#include <plat/usb-phy.h>
#include <mach/regs-pmu.h>
-extern volatile int pen_release;
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.handle_irq = gic_handle_irq,
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.init_irq = exynos5_init_irq,
+ .smp = smp_ops(exynos_smp_ops),
.map_io = exynos5250_dt_map_io,
.handle_irq = gic_handle_irq,
.init_machine = exynos5250_dt_machine_init,
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.handle_irq = gic_handle_irq,
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/hdmi.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-fb.h>
MACHINE_START(SMDK4212, "SMDK4212")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <drm/exynos_drm.h>
#include "common.h"
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
MACHINE_START(SMDKC210, "SMDKC210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,
#include <plat/cpu.h>
+#include "common.h"
+
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM5 : S5P_VA_SYSRAM)
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit exynos_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init exynos_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
if (!soc_is_exynos5250())
scu_enable(scu_base_addr());
__raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
}
+
+struct smp_operations exynos_smp_ops __initdata = {
+ .smp_init_cpus = exynos_smp_init_cpus,
+ .smp_prepare_cpus = exynos_smp_prepare_cpus,
+ .smp_secondary_init = exynos_secondary_init,
+ .smp_boot_secondary = exynos_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = exynos_cpu_die,
+#endif
+};
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c3_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c4_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c5_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c6_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c7_cfg_gpio(struct platform_device *dev)
--- /dev/null
+config ARCH_HIGHBANK
+ bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select HAVE_SMP
+ select SPARSE_IRQ
+ select USE_OF
+++ /dev/null
-zreladdr-y := 0x00008000
static inline void highbank_lluart_map_io(void) {}
#endif
+#ifdef CONFIG_PM_SLEEP
+extern void highbank_pm_init(void);
+#else
+static inline void highbank_pm_init(void) {}
+#endif
+
extern void highbank_smc1(int fn, int arg);
+extern void highbank_cpu_die(unsigned int cpu);
+
+extern struct smp_operations highbank_smp_ops;
static void __init highbank_init(void)
{
pm_power_off = highbank_power_off;
+ highbank_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
};
DT_MACHINE_START(HIGHBANK, "Highbank")
+ .smp = smp_ops(highbank_smp_ops),
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
extern void secondary_startup(void);
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * CPU0 should not be shut down via hotplug. cpu_idle can WFI
- * or a proper shutdown or hibernate should be used.
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/* empty */
+++ /dev/null
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
+++ /dev/null
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
extern void secondary_startup(void);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit highbank_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init highbank_smp_init_cpus(void)
{
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
+
+struct smp_operations highbank_smp_ops __initdata = {
+ .smp_init_cpus = highbank_smp_init_cpus,
+ .smp_prepare_cpus = highbank_smp_prepare_cpus,
+ .smp_secondary_init = highbank_secondary_init,
+ .smp_boot_secondary = highbank_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = highbank_cpu_die,
+#endif
+};
.valid = suspend_valid_only_mem,
};
-static int __init highbank_pm_init(void)
+void __init highbank_pm_init(void)
{
suspend_set_ops(&highbank_pm_ops);
- return 0;
}
-module_init(highbank_pm_init);
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-
-dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
- imx53-evk.dtb \
- imx53-qsb.dtb \
- imx53-smd.dtb \
-
-dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
#include <asm/cp15.h>
#include <mach/common.h>
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
while (1)
;
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
.handle_irq = imx6q_handle_irq,
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ulpi.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include "devices-imx31.h"
#include <linux/platform_device.h>
#include <linux/module.h>
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
/* IMX camera FIQ handler */
EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
scu_base = IMX_IO_ADDRESS(base);
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit imx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
gic_secondary_init(0);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
imx_enable_cpu(cpu, true);
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init imx_smp_init_cpus(void)
{
int i, ncores;
scu_enable(scu_base);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
}
+
+struct smp_operations imx_smp_ops __initdata = {
+ .smp_init_cpus = imx_smp_init_cpus,
+ .smp_prepare_cpus = imx_smp_prepare_cpus,
+ .smp_secondary_init = imx_secondary_init,
+ .smp_boot_secondary = imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = imx_cpu_die,
+#endif
+};
+++ /dev/null
-/* empty */
-
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
-dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
/*****************************************************************************
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
+++ /dev/null
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
static int __initdata gpio0_irqs[4] = {
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#define RD88F6192_GPIO_USB_VBUS 10
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
-
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
#include <mach/irqs.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "common.h"
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/cputype.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
#include <linux/slab.h>
#include <linux/genalloc.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
struct sram_bank_info {
char *pool_name;
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
-
-dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb
-dtb-$(CONFIG_ARCH_MSM8960) += msm8960-cdp.dtb
};
DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
.map_io = msm_map_msm8x60_io,
.init_irq = msm8x60_init_irq,
.handle_irq = gic_handle_irq,
};
DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
.map_io = msm_map_msm8960_io,
.init_irq = msm_dt_init_irq,
.timer = &msm_dt_timer,
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "common.h"
#include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include <asm/mach-types.h>
#include <asm/system_info.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <mach/vreg.h>
#include "board-trout.h"
extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
unsigned int mtype, void *caller);
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
#endif
--- /dev/null
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
#include "clock.h"
#include "clock-pcom.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource resources_uart1[] = {
{
#include "clock-pcom.h"
#include "clock-7x30.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource resources_uart2[] = {
{
#include <asm/mach/flash.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "clock-pcom.h"
static struct resource resources_uart3[] = {
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref msm_cpu_die(unsigned int cpu)
{
/*
* we're ready for shutdown now, so do it
*/
cpu_leave_lowpower();
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
#define __ASM_ARCH_MSM_BOARD_H
#include <linux/types.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
/* platform device data structures */
+++ /dev/null
-/* empty */
#include <asm/smp_plat.h>
#include "scm-boot.h"
+#include "common.h"
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
#define SCSS_CPU1CORE_RESET 0xD80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
extern void msm_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen".
- */
-volatile int pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit msm_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
"address\n");
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
static int cold_boot_done;
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
-void __init smp_init_cpus(void)
+static void __init msm_smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
{
}
+
+struct smp_operations msm_smp_ops __initdata = {
+ .smp_init_cpus = msm_smp_init_cpus,
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include "common.h"
+config ARCH_MVEBU
+ bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
if ARCH_MVEBU
menu "Marvell SOC with device tree"
+ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+++ /dev/null
-zreladdr-y := 0x00008000
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/armada-370-xp.h>
+#include "armada-370-xp.h"
#include "common.h"
static struct map_desc armada_370_xp_io_desc[] __initdata = {
+++ /dev/null
-/*
- * Marvell Armada SoC time definitions
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
+++ /dev/null
-/*
- * Marvell Armada SoC kernel uncompression UART routines
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/armada-370-xp.h>
-
-#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
- + 0x12000))
-#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
- + 0x12014))
-
-#define LSR_THRE 0x20
-
-static void putc(const char c)
-{
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- /* Transmit fifo not full? */
- if (*UART_LSR & LSR_THRE)
- break;
- }
-
- *UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
zreladdr-y += 0x40008000
-
-dtb-y += imx23-evk.dtb \
- imx23-olinuxino.dtb \
- imx23-stmp378x_devb.dtb \
- imx28-apx4devkit.dtb \
- imx28-cfa10036.dtb \
- imx28-cfa10049.dtb \
- imx28-evk.dtb \
- imx28-m28evk.dtb \
- imx28-tx28.dtb \
+++ /dev/null
-/* empty */
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
#include "cpu-8815.h"
+++ /dev/null
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#endif /* __ASM_ARCH_GPIO_H */
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
-
-dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
-dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.atag_offset = 0x100,
+ .smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = omap_gic_of_init,
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
.reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
.init_early = omap5_init_early,
.init_irq = omap_gic_of_init,
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.atag_offset = 0x100,
+ .smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
+
+extern void omap4_cpu_die(unsigned int cpu);
+
+extern struct smp_operations omap4_smp_ops;
+
extern void omap5_secondary_startup(void);
#endif
#include "powerdomain.h"
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
-void __ref platform_cpu_die(unsigned int cpu)
+void __ref omap4_cpu_die(unsigned int cpu)
{
unsigned int boot_cpu = 0;
void __iomem *base = omap_get_wakeupgen_base();
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
return scu_base;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit omap4_secondary_init(unsigned int cpu)
{
/*
* Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init omap4_smp_init_cpus(void)
{
unsigned int i = 0, ncores = 1, cpu_id;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
/*
scu_enable(scu_base);
wakeup_secondary();
}
+
+struct smp_operations omap4_smp_ops __initdata = {
+ .smp_init_cpus = omap4_smp_init_cpus,
+ .smp_prepare_cpus = omap4_smp_prepare_cpus,
+ .smp_secondary_init = omap4_secondary_init,
+ .smp_boot_secondary = omap4_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = omap4_cpu_die,
+#endif
+};
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach/pci.h>
#include <asm/system_info.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
+++ /dev/null
-/*
- * arch/arm/mach-orion5x/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
static int __initdata gpio0_irqs[4] = {
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
--- /dev/null
+config ARCH_PICOXCELL
+ bool "Picochip PicoXcell" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_TCM
+ select NO_IOPORT
+ select SPARSE_IRQ
+ select USE_OF
+++ /dev/null
-zreladdr-y := 0x00008000
#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
#include "common.h"
-#define WDT_CTRL_REG_EN_MASK (1 << 0)
-#define WDT_CTRL_REG_OFFS (0x00)
-#define WDT_TIMEOUT_REG_OFFS (0x04)
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+
+#define WDT_CTRL_REG_EN_MASK (1 << 0)
+#define WDT_CTRL_REG_OFFS (0x00)
+#define WDT_TIMEOUT_REG_OFFS (0x04)
static void __iomem *wdt_regs;
/*
+++ /dev/null
-/* empty */
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/picoxcell_soc.h>
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_MAP_H__
-#define __PICOXCELL_MAP_H__
-
-#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
-
-#ifdef __ASSEMBLY__
-#define IO_ADDRESS(x) PHYS_TO_IO((x))
-#else
-#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
-#endif
-
-#endif /* __PICOXCELL_MAP_H__ */
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_SOC_H__
-#define __PICOXCELL_SOC_H__
-
-#define PICOXCELL_UART1_BASE 0x80230000
-#define PICOXCELL_PERIPH_BASE 0x80000000
-#define PICOXCELL_PERIPH_LENGTH SZ_4M
-#define PICOXCELL_VIC0_BASE 0x80060000
-#define PICOXCELL_VIC1_BASE 0x80064000
-
-#endif /* __PICOXCELL_SOC_H__ */
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __TIMEX_H__
-#define __TIMEX_H__
-
-/* Bogus value to allow the kernel to compile. */
-#define CLOCK_TICK_RATE 1000000
-
-#endif /* __TIMEX_H__ */
-
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/balloon3.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "generic.h"
#include "devices.h"
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
#include <mach/pxa300.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include "generic.h"
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa300.h>
#include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/audio.h>
#include "generic.h"
#include <mach/pxa320.h>
#include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
static u64 pxaficp_dmamask = ~(u32)0;
+static struct resource pxa_ir_resources[] = {
+ [0] = {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = IRQ_ICP,
+ .end = IRQ_ICP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
struct platform_device pxa_device_ficp = {
.name = "pxa2xx-ir",
.id = -1,
+ .num_resources = ARRAY_SIZE(pxa_ir_resources),
+ .resource = pxa_ir_resources,
.dev = {
.dma_mask = &pxaficp_dmamask,
.coherent_dma_mask = 0xffffffff,
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "generic.h"
#include "devices.h"
#include <mach/eseries-gpio.h>
#include <mach/eseries-irq.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/flash.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
#include <mach/pxa27x.h>
#include <mach/hx4700.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <mach/pxa25x.h>
#include <mach/idp.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/bitfield.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/irq.h>
#include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pm.h>
#include <mach/smemc.h>
#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <media/soc_camera.h>
#include <linux/gpio.h>
#include <linux/i2c/pxa-i2c.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa320.h>
#include <mach/mxm8x10.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "generic.h"
#include "devices.h"
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/palm27x.h>
#include <sound/pxa2xx-lib.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include <mach/pm.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <media/soc_camera.h>
#include <media/soc_camera.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
#include <mach/irqs.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
void pxa2xx_clear_reset_status(unsigned int mask)
{
#include <mach/hardware.h>
#include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
struct pxa3xx_u2d_ulpi {
struct clk *clk;
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach/flash.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
{
- int ret;
+ int ret, irq;
if (!pdev->dev.platform_data)
return -EINVAL;
gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
+ if (request_irq(irq, sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
}
if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
+ if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
}
led_trigger_unregister_simple(sharpsl_charge_led_trigger);
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->gpio_fatal)
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->batfull_irq)
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
gpio_free(sharpsl_pm.machinfo->gpio_batlock);
gpio_free(sharpsl_pm.machinfo->gpio_batfull);
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/audio.h>
#include <mach/pxa27x.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include <mach/pxa25x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/viper.h>
#include <asm/setup.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include "generic.h"
#include "devices.h"
#include <mach/pxa27x.h>
#include <mach/mfp-pxa27x.h>
#include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/pm.h>
#include "generic.h"
#include <mach/pxa27x.h>
#include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/pm.h>
#include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/zeus.h>
#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
extern void realview_fixup(struct tag *tags, char **from,
struct meminfo *meminfo);
+extern struct smp_operations realview_smp_ops;
+extern void realview_cpu_die(unsigned int cpu);
+
#endif
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref realview_cpu_die(unsigned int cpu)
{
int spurious = 0;
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/* empty */
#include <mach/board-pb11mp.h>
#include <mach/board-pbx.h>
-#include "core.h"
+#include <plat/platsmp.h>
-extern void versatile_secondary_startup(void);
+#include "core.h"
static void __iomem *scu_base_addr(void)
{
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init realview_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
__raw_writel(virt_to_phys(versatile_secondary_startup),
__io_address(REALVIEW_SYS_FLAGSSET));
}
+
+struct smp_operations realview_smp_ops __initdata = {
+ .smp_init_cpus = realview_smp_init_cpus,
+ .smp_prepare_cpus = realview_smp_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = realview_cpu_die,
+#endif
+};
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
+ .smp = smp_ops(realview_smp_ops),
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
+ .smp = smp_ops(realview_smp_ops),
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
#include <asm/irq.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/gpio-cfg.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include "common.h"
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <linux/mtd/mtd.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
#include <mach/regs-gpio.h>
#include <mach/fb.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <mach/regs-mem.h>
#include <mach/hardware.h>
#include <mach/gta02.h>
#include <plat/regs-serial.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include "common.h"
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
#include <asm/mach/irq.h>
#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
static struct map_desc jive_iodesc[] __initdata = {
};
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include <plat/s3c2410.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include "common.h"
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c2410.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/cpu.h>
#include "common.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <mach/fb.h>
#include <plat/clock.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
#include <mach/regs-s3c2443-clock.h>
#include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <plat/regs-fb-v4.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c2443.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
-#include <plat/nand.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
struct platform_device;
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/devs.h>
#include "simtec.h"
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/devs.h>
#include "simtec.h"
#include <mach/dma.h>
#include <plat/devs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/gpio-cfg.h>
static const char *rclksrc[] = {
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
#include <sound/wm8962.h>
#include <sound/wm9081.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#include <mach/crag6410.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/keypad.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
#include "common.h"
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/regs-fb-v4.h>
#include <video/platform_lcd.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/regs-fb-v4.h>
#include <video/platform_lcd.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
#include <plat/regs-serial.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include "common.h"
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
void s3c64xx_ide_setup_gpio(void)
{
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pll.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pll.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/i2c.h>
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/i2c.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
#include <plat/adc.h>
#include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
#include <plat/s5p-time.h>
#include <plat/mfc.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s5p-time.h>
#include "common.h"
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/assabet.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/mach/serial_sa1100.h>
#include <mach/cerf.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/shannon.h>
#include <mach/irqs.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/simpad.h>
#include <mach/irqs.h>
#
#params_phys-y (Instead: Pass atags pointer in r2)
#initrd_phys-y (Instead: Use compiled-in initramfs)
-
-dtb-$(CONFIG_MACH_KZM9G) += sh73a0-kzm9g.dtb
-dtb-$(CONFIG_MACH_KZM9D) += emev2-kzm9d.dtb
-dtb-$(CONFIG_MACH_ARMADILLO800EVA) += r8a7740-armadillo800eva.dtb
}
MACHINE_START(AG5EVM, "ag5evm")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "sh-gpio.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "sh-gpio.h"
+
/*
* SDHI
*
}
MACHINE_START(KOTA2, "kota2")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
};
DT_MACHINE_START(KZM9D_DT, "kzm9d")
+ .smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
};
DT_MACHINE_START(KZM9G_DT, "kzm9g")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
}
MACHINE_START(MARZEN, "marzen")
+ .smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
.init_early = r8a7779_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include <mach/common.h>
+#include <mach/r8a7779.h>
+#include <mach/emev2.h>
#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
static cpumask_t dead_cpus;
-int platform_cpu_kill(unsigned int cpu)
-{
- int k;
-
- /* this function is running on another CPU than the offline target,
- * here we need wait for shutdown code in platform_cpu_die() to
- * finish before asking SoC-specific code to power off the CPU core.
- */
- for (k = 0; k < 1000; k++) {
- if (cpumask_test_cpu(cpu, &dead_cpus))
- return shmobile_platform_cpu_kill(cpu);
-
- mdelay(1);
- }
-
- return 0;
-}
-
-void platform_cpu_die(unsigned int cpu)
+void shmobile_cpu_die(unsigned int cpu)
{
/* hardware shutdown code running on the CPU that is being offlined */
flush_cache_all();
}
}
-int platform_cpu_disable(unsigned int cpu)
+int shmobile_cpu_disable(unsigned int cpu)
{
cpumask_clear_cpu(cpu, &dead_cpus);
/*
*/
return cpu == 0 ? -EPERM : 0;
}
+
+int shmobile_cpu_is_dead(unsigned int cpu)
+{
+ return cpumask_test_cpu(cpu, &dead_cpus);
+}
extern void shmobile_earlytimer_init(void);
extern struct sys_timer shmobile_timer;
extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div);
+ unsigned int mult, unsigned int div);
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_secondary_vector(void);
-extern int shmobile_platform_cpu_kill(unsigned int cpu);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern struct clk sh73a0_extcki_clk;
extern struct clk sh73a0_extalr_clk;
-extern unsigned int sh73a0_get_core_count(void);
-extern void sh73a0_secondary_init(unsigned int cpu);
-extern int sh73a0_boot_secondary(unsigned int cpu);
-extern void sh73a0_smp_prepare_cpus(void);
-
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7779_pm_init(void);
extern void r8a7740_meram_workaround(void);
-extern unsigned int r8a7779_get_core_count(void);
-extern int r8a7779_platform_cpu_kill(unsigned int cpu);
-extern void r8a7779_secondary_init(unsigned int cpu);
-extern int r8a7779_boot_secondary(unsigned int cpu);
-extern void r8a7779_smp_prepare_cpus(void);
extern void r8a7779_register_twd(void);
extern void shmobile_init_late(void);
static inline int shmobile_cpuidle_init(void) { return 0; }
#endif
+extern void shmobile_cpu_die(unsigned int cpu);
+extern int shmobile_cpu_disable(unsigned int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int shmobile_cpu_is_dead(unsigned int cpu);
+#else
+static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
+#endif
+
+extern void shmobile_smp_init_cpus(unsigned int ncores);
+
#endif /* __ARCH_MACH_COMMON_H */
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
extern void emev2_set_boot_vector(unsigned long value);
-extern unsigned int emev2_get_core_count(void);
-extern int emev2_platform_cpu_kill(unsigned int cpu);
-extern void emev2_secondary_init(unsigned int cpu);
-extern int emev2_boot_secondary(unsigned int cpu);
-extern void emev2_smp_prepare_cpus(void);
#define EMEV2_GPIO_BASE 200
#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
+extern struct smp_operations emev2_smp_ops;
+
#endif /* __ASM_EMEV2_H__ */
#define r8a7779_add_device_to_domain(pd, pdev) do { } while (0)
#endif /* CONFIG_PM */
+extern struct smp_operations r8a7779_smp_ops;
+
#endif /* __ASM_R8A7779_H__ */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
+extern struct smp_operations sh73a0_smp_ops;
+
#endif /* __ASM_SH73A0_H__ */
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/r8a7740.h>
#include <mach/irqs.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <linux/ioport.h>
#include <mach/r8a7779.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7367.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7377.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh73a0.h>
#include <mach/irqs.h>
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/of.h>
#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#ifdef CONFIG_ARCH_SH73A0
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
- of_machine_is_compatible("renesas,sh73a0"))
-#else
-#define is_sh73a0() (0)
-#endif
-
-#define is_r8a7779() machine_is_marzen()
-
-#ifdef CONFIG_ARCH_EMEV2
-#define is_emev2() of_machine_is_compatible("renesas,emev2")
-#else
-#define is_emev2() (0)
-#endif
-
-static unsigned int __init shmobile_smp_get_core_count(void)
-{
- if (is_sh73a0())
- return sh73a0_get_core_count();
-
- if (is_r8a7779())
- return r8a7779_get_core_count();
-
- if (is_emev2())
- return emev2_get_core_count();
-
- return 1;
-}
-
-static void __init shmobile_smp_prepare_cpus(void)
-{
- if (is_sh73a0())
- sh73a0_smp_prepare_cpus();
-
- if (is_r8a7779())
- r8a7779_smp_prepare_cpus();
-
- if (is_emev2())
- emev2_smp_prepare_cpus();
-}
-
-int shmobile_platform_cpu_kill(unsigned int cpu)
-{
- if (is_r8a7779())
- return r8a7779_platform_cpu_kill(cpu);
-
- if (is_emev2())
- return emev2_platform_cpu_kill(cpu);
-
- return 1;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __init shmobile_smp_init_cpus(unsigned int ncores)
{
- trace_hardirqs_off();
-
- if (is_sh73a0())
- sh73a0_secondary_init(cpu);
-
- if (is_r8a7779())
- r8a7779_secondary_init(cpu);
-
- if (is_emev2())
- emev2_secondary_init(cpu);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- if (is_sh73a0())
- return sh73a0_boot_secondary(cpu);
-
- if (is_r8a7779())
- return r8a7779_boot_secondary(cpu);
-
- if (is_emev2())
- return emev2_boot_secondary(cpu);
-
- return -ENOSYS;
-}
-
-void __init smp_init_cpus(void)
-{
- unsigned int ncores = shmobile_smp_get_core_count();
unsigned int i;
if (ncores > nr_cpu_ids) {
set_smp_cross_call(gic_raise_softirq);
}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
- shmobile_smp_prepare_cpus();
-}
}
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
+ .smp = smp_ops(emev2_smp_ops),
.init_early = emev2_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = emev2_init_irq_dt,
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/sh_pfc.h>
#include <linux/io.h>
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
/*
* FIXME !!
*
}
-unsigned int __init emev2_get_core_count(void)
+static unsigned int __init emev2_get_core_count(void)
{
if (!scu_base) {
scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
return scu_base ? scu_get_core_count(scu_base) : 1;
}
-int emev2_platform_cpu_kill(unsigned int cpu)
+static int emev2_platform_cpu_kill(unsigned int cpu)
{
return 0; /* not supported yet */
}
-void __cpuinit emev2_secondary_init(unsigned int cpu)
+static int __maybe_unused emev2_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return emev2_platform_cpu_kill(cpu);
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+static void __cpuinit emev2_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit emev2_boot_secondary(unsigned int cpu)
+static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
return 0;
}
-void __init emev2_smp_prepare_cpus(void)
+static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
+
+static void __init emev2_smp_init_cpus(void)
+{
+ unsigned int ncores = emev2_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations emev2_smp_ops __initdata = {
+ .smp_init_cpus = emev2_smp_init_cpus,
+ .smp_prepare_cpus = emev2_smp_prepare_cpus,
+ .smp_secondary_init = emev2_secondary_init,
+ .smp_boot_secondary = emev2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = emev2_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
__raw_writel(tmp, scu_base + 8);
}
-unsigned int __init r8a7779_get_core_count(void)
+static unsigned int __init r8a7779_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
return scu_get_core_count(scu_base);
}
-int r8a7779_platform_cpu_kill(unsigned int cpu)
+static int r8a7779_platform_cpu_kill(unsigned int cpu)
{
struct r8a7779_pm_ch *ch = NULL;
int ret = -EIO;
return ret ? ret : 1;
}
-void __cpuinit r8a7779_secondary_init(unsigned int cpu)
+static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return r8a7779_platform_cpu_kill(cpu);
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
+static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
struct r8a7779_pm_ch *ch = NULL;
int ret = -EIO;
return ret;
}
-void __init r8a7779_smp_prepare_cpus(void)
+static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
r8a7779_platform_cpu_kill(2);
r8a7779_platform_cpu_kill(3);
}
+
+static void __init r8a7779_smp_init_cpus(void)
+{
+ unsigned int ncores = r8a7779_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations r8a7779_smp_ops __initdata = {
+ .smp_init_cpus = r8a7779_smp_init_cpus,
+ .smp_prepare_cpus = r8a7779_smp_prepare_cpus,
+ .smp_secondary_init = r8a7779_secondary_init,
+ .smp_boot_secondary = r8a7779_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = r8a7779_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <asm/smp_plat.h>
+#include <mach/sh73a0.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include <asm/hardware/gic.h>
__raw_writel(tmp, scu_base + 8);
}
-unsigned int __init sh73a0_get_core_count(void)
+static unsigned int __init sh73a0_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
return scu_get_core_count(scu_base);
}
-void __cpuinit sh73a0_secondary_init(unsigned int cpu)
+static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
+static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
return 0;
}
-void __init sh73a0_smp_prepare_cpus(void)
+static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
+
+static void __init sh73a0_smp_init_cpus(void)
+{
+ unsigned int ncores = sh73a0_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return 1;
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+struct smp_operations sh73a0_smp_ops __initdata = {
+ .smp_init_cpus = sh73a0_smp_init_cpus,
+ .smp_prepare_cpus = sh73a0_smp_prepare_cpus,
+ .smp_secondary_init = sh73a0_secondary_init,
+ .smp_boot_secondary = sh73a0_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = sh73a0_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
--- /dev/null
+config ARCH_SOCFPGA
+ bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PL061 if GPIOLIB
+ select HAVE_ARM_SCU
+ select SPARSE_IRQ
+ select USE_OF
+++ /dev/null
-zreladdr-y := 0x00008000
+++ /dev/null
-/*
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
+++ /dev/null
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
: "cc");
}
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
{
for (;;) {
wfi();
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void __cpuinit platform_cpu_die(unsigned int cpu)
+void __ref spear13xx_cpu_die(unsigned int cpu)
{
int spurious = 0;
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
- platform_do_lowpower(cpu, &spurious);
+ spear13xx_do_lowpower(cpu, &spurious);
/*
* bring this CPU back into the world of cache
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
bool dw_dma_filter(struct dma_chan *chan, void *slave);
void spear_restart(char, const char *);
void spear13xx_secondary_startup(void);
+void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
#ifdef CONFIG_MACH_SPEAR1310
void __init spear1310_clk_init(void);
+++ /dev/null
-/*
- * arch/arm/mach-spear13xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
+#include <mach/generic.h>
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
-extern void spear13xx_secondary_startup(void);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init spear13xx_smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base);
*/
__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
}
+
+struct smp_operations spear13xx_smp_ops __initdata = {
+ .smp_init_cpus = spear13xx_smp_init_cpus,
+ .smp_prepare_cpus = spear13xx_smp_prepare_cpus,
+ .smp_secondary_init = spear13xx_secondary_init,
+ .smp_boot_secondary = spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = spear13xx_cpu_die,
+#endif
+};
}
DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
.map_io = spear1310_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
};
DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
.map_io = spear13xx_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
+++ /dev/null
-/*
- * arch/arm/mach-spear3xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb
+++ /dev/null
-/*
- * arch/arm/mach-spear6xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
-
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-tec.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb
#include "board.h"
#include "clock.h"
+#include "common.h"
struct tegra_ehci_platform_data tegra_ehci1_pdata = {
.operating_mode = TEGRA_USB_OTG,
DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
.map_io = tegra_map_common_io,
+ .smp = smp_ops(tegra_smp_ops),
.init_early = tegra20_init_early,
.init_irq = tegra_dt_init_irq,
.handle_irq = gic_handle_irq,
#include "board.h"
#include "clock.h"
+#include "common.h"
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
};
DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
+ .smp = smp_ops(tegra_smp_ops),
.map_io = tegra_map_common_io,
.init_early = tegra30_init_early,
.init_irq = tegra_dt_init_irq,
#include <linux/platform_device.h>
#include <linux/rfkill-gpio.h>
-
+#include "board.h"
#include "board-paz00.h"
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
#include "board.h"
#include "clock.h"
+#include "common.h"
#include "fuse.h"
#include "pmc.h"
#include "apbio.h"
--- /dev/null
+extern struct smp_operations tegra_smp_ops;
+
+extern void tegra_cpu_die(unsigned int cpu);
+extern int tegra_cpu_disable(unsigned int cpu);
static void (*tegra_hotplug_shutdown)(void);
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref tegra_cpu_die(unsigned int cpu)
{
cpu = cpu_logical_map(cpu);
BUG();
}
-int platform_cpu_disable(unsigned int cpu)
+int tegra_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
+++ /dev/null
-/* empty */
#include "reset.h"
#include "tegra_cpu_car.h"
+#include "common.h"
+
extern void tegra_secondary_startup(void);
static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
#define EVP_CPU_RESET_VECTOR \
(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
return 0;
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int status;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init tegra_smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
{
tegra_cpu_reset_handler_init();
scu_enable(scu_base);
}
+
+struct smp_operations tegra_smp_ops __initdata = {
+ .smp_init_cpus = tegra_smp_init_cpus,
+ .smp_prepare_cpus = tegra_smp_prepare_cpus,
+ .smp_secondary_init = tegra_secondary_init,
+ .smp_boot_secondary = tegra_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = tegra_cpu_die,
+ .cpu_disable = tegra_cpu_disable,
+#endif
+};
+++ /dev/null
-/* empty */
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include "ste-dma40-db8500.h"
#include "devices-db8500.h"
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
#include <linux/sys_soc.h>
#include <linux/amba/bus.h>
#include <linux/platform_data/i2c-nomadik.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
struct spi_master_cntlr;
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
+#include <mach/setup.h>
-static inline void platform_do_lowpower(unsigned int cpu)
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref ux500_cpu_die(unsigned int cpu)
{
flush_cache_all();
- /* we put the platform to just WFI */
+ /* directly enter low power state, skipping secure registers */
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
}
}
}
-
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
- /* directly enter low power state, skipping secure registers */
- platform_do_lowpower(cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-
-#endif /* __ASM_ARCH_GPIO_H */
.type = MT_MEMORY, \
}
+extern struct smp_operations ux500_smp_ops;
+extern void ux500_cpu_die(unsigned int cpu);
+
#endif /* __ASM_ARCH_SETUP_H */
/* This is called from headsmp.S to wakeup the secondary core */
extern void u8500_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int pen_release = -1;
-
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit ux500_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init ux500_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
wakeup_secondary();
}
+
+struct smp_operations ux500_smp_ops __initdata = {
+ .smp_init_cpus = ux500_smp_init_cpus,
+ .smp_prepare_cpus = ux500_smp_prepare_cpus,
+ .smp_secondary_init = ux500_secondary_init,
+ .smp_boot_secondary = ux500_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = ux500_cpu_die,
+#endif
+};
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
+++ /dev/null
-/* empty */
-menu "Versatile Express platform type"
- depends on ARCH_VEXPRESS
-
-config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
- bool "Enable A5 and A9 only errata work-arounds"
- default y
- select ARM_ERRATA_720789
- select ARM_ERRATA_751472
- select PL310_ERRATA_753970 if CACHE_PL310
- help
- Provides common dependencies for Versatile Express platforms
- based on Cortex-A5 and Cortex-A9 processors. In order to
- build a working kernel, you must also enable relevant core
- tile support or Flattened Device Tree based support options.
-
-config ARCH_VEXPRESS_CA9X4
- bool "Versatile Express Cortex-A9x4 tile"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_VEXPRESS_DT
- bool "Device Tree support for Versatile Express platforms"
+config ARCH_VEXPRESS
+ bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
select ARM_GIC
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select HAVE_PATA_PLATFORM
select HAVE_SMP
+ select ICST
select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
+ select NO_IOPORT
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- New Versatile Express platforms require Flattened Device Tree to
- be passed to the kernel.
-
This option enables support for systems using Cortex processor based
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
for example:
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
- If your bootloader supports Flattened Device Tree based booting,
- say Y here.
+menu "Versatile Express platform type"
+ depends on ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ bool "Enable A5 and A9 only errata work-arounds"
+ default y
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_751472
+ select PL310_ERRATA_753970 if CACHE_PL310
+ help
+ Provides common dependencies for Versatile Express platforms
+ based on Cortex-A5 and Cortex-A9 processors. In order to
+ build a working kernel, you must also enable relevant core
+ tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_CA9X4
+ bool "Versatile Express Cortex-A9x4 tile"
endmenu
#
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ -I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
+++ /dev/null
-# Those numbers are used only by the non-DT V2P-CA9 platform
-# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
- zreladdr-y += 0x60008000
-params_phys-y := 0x60000100
-initrd_phys-y := 0x60800000
-
-dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
- vexpress-v2p-ca9.dtb \
- vexpress-v2p-ca15-tc1.dtb \
- vexpress-v2p-ca15_a7.dtb
#define V2T_PERIPH 0xf8200000
void vexpress_dt_smp_map_io(void);
+
+extern struct smp_operations vexpress_smp_ops;
+
+extern void vexpress_cpu_die(unsigned int cpu);
#include "core.h"
#include <mach/motherboard.h>
+#include <mach/irqs.h>
#include <plat/clcd.h>
#include <asm/smp_plat.h>
#include <asm/cp15.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref vexpress_cpu_die(unsigned int cpu)
{
int spurious = 0;
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-/* empty */
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
+#ifndef CONFIG_SPARSE_IRQ
#define NR_IRQS 256
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-vexpress/include/mach/timex.h
- *
- * RealView architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
+++ /dev/null
-/*
- * arch/arm/mach-vexpress/include/mach/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-
-#define UART_BASE 0x10009000
-#define UART_BASE_RS1 0x1c090000
-
-static unsigned long get_uart_base(void)
-{
-#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
- unsigned long mpcore_periph;
-
- /*
- * Make an educated guess regarding the memory map:
- * - the original A9 core tile, which has MPCore peripherals
- * located at 0x1e000000, should use UART at 0x10009000
- * - all other (RS1 complaint) tiles use UART mapped
- * at 0x1c090000
- */
- asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
-
- if (mpcore_periph == 0x1e000000)
- return UART_BASE;
- else
- return UART_BASE_RS1;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
- return UART_BASE;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
- return UART_BASE_RS1;
-#else
- return 0;
-#endif
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned long base = get_uart_base();
-
- if (!base)
- return;
-
- while (AMBA_UART_FR(base) & (1 << 5))
- barrier();
-
- AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base = get_uart_base();
-
- if (!base)
- return;
-
- while (AMBA_UART_FR(base) & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
#include <mach/motherboard.h>
-#include "core.h"
+#include <plat/platsmp.h>
-extern void versatile_secondary_startup(void);
+#include "core.h"
#if defined(CONFIG_OF)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init vexpress_smp_init_cpus(void)
{
if (ct_desc)
ct_desc->init_cpu_map();
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
{
/*
* Initialise the present map, which describes the set of CPUs
*/
v2m_flags_set(virt_to_phys(versatile_secondary_startup));
}
+
+struct smp_operations __initdata vexpress_smp_ops = {
+ .smp_init_cpus = vexpress_smp_init_cpus,
+ .smp_prepare_cpus = vexpress_smp_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = vexpress_cpu_die,
+#endif
+};
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/smp.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <mach/motherboard.h>
#include <plat/sched_clock.h>
+#include <plat/platsmp.h>
#include "core.h"
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.atag_offset = 0x100,
+ .smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
.restart = v2m_restart,
MACHINE_END
-#if defined(CONFIG_ARCH_VEXPRESS_DT)
-
static struct map_desc v2m_rs1_io_desc __initdata = {
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(0x1c000000),
DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.dt_compat = v2m_dt_match,
+ .smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
.init_irq = v2m_dt_init_irq,
.handle_irq = gic_handle_irq,
.restart = v2m_restart,
MACHINE_END
-
-#endif
+++ /dev/null
-/* empty */
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include <mach/regs-ldm.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
#include "cpu.h"
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include "nuc950.h"
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
+extern void imx_cpu_die(unsigned int cpu);
+
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
extern void imx51_pm_init(void);
static inline int mx51_neon_fixup(void) { return 0; }
#endif
+extern struct smp_operations imx_smp_ops;
+
#endif
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
-#include <mach/sdma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
extern struct device mxc_aips_bus;
extern struct device mxc_ahb_bus;
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata);
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
struct imx_imx21_hcd_data {
resource_size_t iobase;
resource_size_t irq;
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data);
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
resource_size_t iobase;
resource_size_t iosize;
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata);
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
int id;
resource_size_t iobase;
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata);
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
struct imx_imx_ssi_data {
int id;
resource_size_t iobase;
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata);
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
struct imx_imx_uart_3irq_data {
int id;
resource_size_t iobase;
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
struct imx_imx_udc_data {
resource_size_t iobase;
resource_size_t iosize;
const struct imx_imx_udc_data *data,
const struct imxusb_platform_data *pdata);
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
+#include <linux/platform_data/video-mx3fb.h>
+#include <linux/platform_data/camera-mx3.h>
struct imx_ipu_core_data {
resource_size_t iobase;
resource_size_t synirq;
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
struct imx_mx1_camera_data {
resource_size_t iobase;
resource_size_t iosize;
const struct imx_mx1_camera_data *data,
const struct mx1_camera_pdata *pdata);
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
resource_size_t iobasecsi;
resource_size_t iosizecsi;
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_camera_data *data);
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
struct imx_mxc_ehci_data {
int id;
resource_size_t iobase;
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata);
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
int id;
resource_size_t iobase;
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata);
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data);
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
struct imx_sdhci_esdhc_imx_data {
const char *devid;
int id;
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata);
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
struct imx_spi_imx_data {
const char *devid;
int id;
+++ /dev/null
-/* empty */
#include <linux/module.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <net/dsa.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <mach/bridge-regs.h>
/* Create a clkdev entry for a given device/clk */
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
/*
* GPIO unit register offsets.
/*
- * arch/arm/plat-orion/include/plat/gpio.h
+ * arch/arm/plat-orion/include/plat/orion-gpio.h
*
* Marvell Orion SoC GPIO handling.
*
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <plat/irq.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
+#include <plat/orion-gpio.h>
#include <plat/mpp.h>
/* Address of the ith MPP control register */
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/fb.h>
#include <plat/fb-s3c2410.h>
#include <plat/hdmi.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/usb-phy.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+++ /dev/null
-/* empty */
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
--- /dev/null
+/*
+ * linux/arch/arm/plat-versatile/include/plat/platsmp.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void versatile_secondary_startup(void);
+extern void versatile_secondary_init(unsigned int cpu);
+extern int versatile_boot_secondary(unsigned int cpu, struct task_struct *idle);
#include <asm/smp_plat.h>
#include <asm/hardware/gic.h>
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __cpuinit versatile_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
#include <linux/dmaengine.h>
#include <linux/ktime.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/platform.h>
#define DRV_NAME "ep93xx-ide"
#include <scsi/scsi_host.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include <mach/dma.h>
#define DRV_NAME "pata_pxa"
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
#include <plat/regs-ata.h>
#define DRV_NAME "pata_samsung_cf"
#include <plat/ste_dma40.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include "cryp_p.h"
#include <crypto/scatterwalk.h>
#include <crypto/algapi.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include "hash_alg.h"
#ifndef AT_HDMAC_REGS_H
#define AT_HDMAC_REGS_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#define AT_DMA_MAX_NR_CHANNELS 8
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include "dmaengine.h"
#include <linux/module.h>
#include <asm/irq.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#include "dmaengine.h"
#include <linux/of_device.h>
#include <asm/irq.h>
-#include <mach/sdma.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#include "dmaengine.h"
#include <linux/platform_device.h>
#include <linux/device.h>
#include <mach/regs-icu.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
#include "dmaengine.h"
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/clk.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
#include "dmaengine.h"
#include "mv_xor.h"
#include <linux/hwmon-sysfs.h>
#include <plat/adc.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
struct s3c_hwmon_attr {
struct sensor_device_attribute in;
#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
/* ----- global defines ----------------------------------------------- */
#include <linux/pinctrl/consumer.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
*******************************************************************************/
#include <linux/io.h>
#include <mach/mfp.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-nuc900.h>
/* nuc900 i2c registers offset */
#include <asm/irq.h>
#include <plat/regs-iic.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
#define QUIRK_S3C2440 (1 << 0)
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
/* Key scan registers */
#define DAVINCI_KEYSCAN_KEYCTRL 0x0000
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/ep93xx_keypad.h>
+#include <linux/platform_data/keypad-ep93xx.h>
/*
* Keypad Interface Register offsets
#include <linux/clk.h>
#include <linux/module.h>
-#include <plat/ske.h>
+#include <linux/platform_data/keypad-nomadik-ske.h>
/* SKE_CR bits */
#define SKE_KPMLT (0x1 << 6)
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
/*
* Keypad Controller registers
*/
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/pxa930_rotary.h>
+#include <linux/platform_data/keyboard-pxa930_rotary.h>
#define SBCR (0x04)
#define ERCR (0x0c)
#include <linux/pm_wakeup.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <plat/keyboard.h>
+#include <linux/platform_data/keyboard-spear.h>
/* Keyboard Registers */
#define MODE_CTL_REG 0x00
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
/* Keypad Interface Control Registers */
#define KPI_CONF 0x00
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/pxa930_trkball.h>
+#include <linux/platform_data/mouse-pxa930_trkball.h>
/* Trackball Controller Register Definitions */
#define TBCR (0x000C)
#include <plat/adc.h>
#include <plat/regs-adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
/*
* GPIO extension bus.
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/module.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
/*
* The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
/* our context */
#include <mach/hardware.h>
#include <mach/mux.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <linux/io.h>
#include <mach/dma-mx1-mx2.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
/*
* CSI registers
#include <linux/videodev2.h>
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
#include <mach/hardware.h>
#include <asm/dma.h>
#include <media/soc_mediabus.h>
#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/dma.h>
+#include <linux/platform_data/camera-mx3.h>
+#include <linux/platform_data/dma-imx.h>
#define MX3_CAM_DRV_NAME "mx3-camera"
#include <linux/videodev2.h>
#include <mach/dma.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#define PXA_CAM_VERSION "0.0.6"
#define PXA_CAM_DRV_NAME "pxa27x-camera"
#include <linux/spinlock.h>
#include <linux/videodev2.h>
#include <media/v4l2-subdev.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include "mipi-csis.h"
static int debug;
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#define DRIVER_NAME "sa11x0-mcp"
#include <linux/dma-mapping.h>
#include <linux/mmc/mmc.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
#include <mach/edma.h>
/*
#include <asm/div64.h>
#include <asm/sizes.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include <mach/clk.h>
#include <asm/sizes.h>
#include <asm/unaligned.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "mvsdio.h"
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "pxamci.h"
#include <mach/regs-sdi.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
#include <asm/gpio.h>
-#include <mach/sdhci.h>
+#include <mach/gpio-tegra.h>
+#include <linux/platform_data/mmc-sdhci-tegra.h>
#include "sdhci-pltfm.h"
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
-#include <mach/nand.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
/*
* This is a device driver for the NAND flash controller found on the
#include <linux/of_mtd.h>
#include <asm/mach/flash.h>
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
#include <mach/hardware.h>
#define DRIVER_NAME "mxc_nand"
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
#include <mtd/mtd-abi.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
#include <linux/of_device.h>
#include <mach/dma.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
#define NAND_STOP_DELAY (2 * HZ/50)
#include <asm/io.h>
#include <plat/regs-nand.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
#include <mach/netx-regs.h>
#include <mach/pfifo.h>
#include <mach/xc.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
/* XC Fifo Offsets */
#define EMPTY_PTR_FIFO(xcno) (0 + ((xcno) << 3)) /* Index of the empty pointer FIFO */
#include <net/irda/irda_device.h>
#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/regs-uart.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/regs-ost.h>
+#include <mach/regs-uart.h>
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
int txdma;
int rxdma;
+ int uart_irq;
+ int icp_irq;
+
struct irlap_cb *irlap;
struct qos_info qos;
si->speed = 9600;
- err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev);
+ err = request_irq(si->uart_irq, pxa_irda_sir_irq, 0, dev->name, dev);
if (err)
goto err_irq1;
- err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev);
+ err = request_irq(si->icp_irq, pxa_irda_fir_irq, 0, dev->name, dev);
if (err)
goto err_irq2;
/*
* The interrupt must remain disabled for now.
*/
- disable_irq(IRQ_STUART);
- disable_irq(IRQ_ICP);
+ disable_irq(si->uart_irq);
+ disable_irq(si->icp_irq);
err = -EBUSY;
si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
/*
* Now enable the interrupt and start the queue
*/
- enable_irq(IRQ_STUART);
- enable_irq(IRQ_ICP);
+ enable_irq(si->uart_irq);
+ enable_irq(si->icp_irq);
netif_start_queue(dev);
printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
err_tx_dma:
pxa_free_dma(si->rxdma);
err_rx_dma:
- free_irq(IRQ_ICP, dev);
+ free_irq(si->icp_irq, dev);
err_irq2:
- free_irq(IRQ_STUART, dev);
+ free_irq(si->uart_irq, dev);
err_irq1:
return err;
si->irlap = NULL;
}
- free_irq(IRQ_STUART, dev);
- free_irq(IRQ_ICP, dev);
+ free_irq(si->uart_irq, dev);
+ free_irq(si->icp_irq, dev);
pxa_free_dma(si->rxdma);
pxa_free_dma(si->txdma);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
+ si->uart_irq = platform_get_irq(pdev, 0);
+ si->icp_irq = platform_get_irq(pdev, 1);
+
si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
#include <asm/irq.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/sh_pfc.h>
struct sh_pfc_chip {
struct sh_pfc *pfc;
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/edma.h>
#define SPI_NO_RESOURCE ((resource_size_t)-1)
#include <linux/scatterlist.h>
#include <linux/spi/spi.h>
-#include <mach/dma.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/dma-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#define SSPCR0 0x0000
#define SSPCR0_MODE_SHIFT 6
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
#define DRIVER_NAME "spi_imx"
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
/* usi registers offset */
#define USI_CNT 0x00
#include <linux/of_gpio.h>
#include <mach/dma.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#define MAX_SPI_PORTS 3
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include "synaptics_i2c_rmi4.h"
#include <asm/io.h>
#include <asm/irq.h>
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
/* Register definitions */
#define URXD0 0x0 /* Receiver Register */
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
#include <mach/hardware.h>
#include "imx_udc.h"
IRQF_SHARED, driver_name, udc);
if (retval != 0) {
dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
- driver_name, IRQ_USB, retval);
+ driver_name, udc->irq, retval);
goto err_irq;
}
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
#include <mach/hardware.h>
#include <plat/regs-udc.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include "s3c2410_udc.h"
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#include <asm/mach-types.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
#include <linux/clk.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/of_gpio.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/usb-phy.h>
#define EHCI_INSNREG00(base) (base + 0x90)
#ifndef __LINUX_IMX21_HCD_H__
#define __LINUX_IMX21_HCD_H__
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
#define NUM_ISO_ETDS 2
#define USB_NUM_ETD 32
#include <linux/clk.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#ifndef CONFIG_ARCH_DAVINCI_DA8XX
#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/platform_device.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <plat/usb-phy.h>
struct exynos_ohci_hcd {
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <mach/hardware.h>
-#include <mach/ohci.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
/*
* UHC: USB Host Controller (OHCI-like) register definitions
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
#include <linux/usb/nop-usb-xceiv.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#include "musb_core.h"
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/pfn.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#include "musb_core.h"
struct ux500_dma_channel {
#include <linux/clk.h>
#include <linux/fb.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
/* Vertical Frame Timing Registers */
#define EP93XXFB_VLINES_TOTAL 0x0000 /* SW locked */
#include <linux/io.h>
#include <linux/math64.h>
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
#include <mach/hardware.h>
/*
#include <mach/msm_iomap.h>
#include <mach/irqs.h>
#include <mach/board.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include "mddi_hw.h"
#define FLAG_DISABLE_HIBERNATION 0x0001
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
struct panel_info {
struct platform_device pdev;
#include <linux/sched.h>
#include <linux/gpio.h>
#include <linux/slab.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
static DECLARE_WAIT_QUEUE_HEAD(nt35399_vsync_wait);
#include <linux/gpio.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#define LCD_CONTROL_BLOCK_BASE 0x110000
#include <linux/slab.h>
#include <mach/msm_iomap.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <linux/platform_device.h>
#include <linux/export.h>
#define _MDP_HW_H_
#include <mach/msm_iomap.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
struct mdp_info {
struct mdp_device mdp_dev;
#include <linux/file.h>
#include <linux/delay.h>
#include <linux/msm_mdp.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include "mdp_hw.h"
#include "mdp_scale_tables.h"
#include <linux/msm_mdp.h>
#include <linux/io.h>
#include <linux/uaccess.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <mach/board.h>
#include <linux/workqueue.h>
#include <linux/clk.h>
#include <linux/clk.h>
#include <linux/mutex.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include <mach/hardware.h>
#include <mach/ipu.h>
-#include <mach/mx3fb.h>
+#include <linux/platform_data/video-mx3fb.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-ldm.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include "nuc900fb.h"
#define __NUC900FB_H
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
enum nuc900_lcddrv_type {
LCDDRV_NUC910,
#include <asm/irq.h>
#include <asm/div64.h>
#include <mach/bitfield.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
/*
* Complain if VAR is out of range.
#include <linux/platform_device.h>
#include <linux/wait.h>
-#include <mach/vt8500fb.h>
+#include <linux/platform_data/video-vt8500lcdfb.h>
#include "vt8500lcdfb.h"
#include "wmt_ge_rops.h"
#include <linux/of_fdt.h>
#include <linux/memblock.h>
-#include <mach/vt8500fb.h>
+#include <linux/platform_data/video-vt8500lcdfb.h>
#include "wm8505fb_regs.h"
#include "wmt_ge_rops.h"
#ifndef __LINUX_ATMEL_AES_H
#define __LINUX_ATMEL_AES_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
/**
* struct aes_dma_data - DMA data for AES
/*
- * include/asm-arm/arch-tegra/include/mach/sdhci.h
- *
* Copyright (C) 2009 Palm, Inc.
* Author: Yvonne Yip <y@palm.com>
*
* GNU General Public License for more details.
*
*/
-#ifndef __ASM_ARM_ARCH_TEGRA_SDHCI_H
-#define __ASM_ARM_ARCH_TEGRA_SDHCI_H
+#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H
+#define __PLATFORM_DATA_TEGRA_SDHCI_H
#include <linux/mmc/host.h>
#include <sound/ac97_codec.h>
#include <sound/soc.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include "ep93xx-pcm.h"
/*
#include <mach/hardware.h>
#include <mach/ep93xx-regs.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include "ep93xx-pcm.h"
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include <mach/ep93xx-regs.h>
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include "imx-pcm.h"
#include <asm/fiq.h>
#include <mach/irqs.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include "imx-ssi.h"
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include <mach/hardware.h>
#include "imx-ssi.h"
#define DRV_NAME "imx-ssi"
#include <linux/dmaengine.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-imx.h>
#include "imx-pcm.h"
struct imx_ssi {
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include "kirkwood.h"
#define DRV_NAME "kirkwood-i2s"
#include <linux/slab.h>
#include <sound/soc.h>
#include <mach/kirkwood.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <asm/mach-types.h>
#include "../codecs/cs42l51.h"
#include <linux/slab.h>
#include <sound/soc.h>
#include <mach/kirkwood.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <asm/mach-types.h>
#include "../codecs/alc5623.h"
#include <asm/mach-types.h>
#include <mach/audio.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "../codecs/wm9712.h"
#include "pxa2xx-ac97.h"
#include <mach/dma.h>
#include <plat/regs-ac97.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include "dma.h"
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include "dma.h"
#include "idma.h"
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/dma.h>
#include "dma.h"
#include <sound/soc.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "s3c24xx-i2s.h"
#include "s3c24xx_simtec.h"
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/dma.h>
#include "dma.h"