usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
authorAndrew Goodbody <andrew.goodbody@cambrionix.com>
Tue, 31 May 2016 15:05:26 +0000 (10:05 -0500)
committerBen Hutchings <ben@decadent.org.uk>
Mon, 22 Aug 2016 21:37:13 +0000 (22:37 +0100)
commit f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 upstream.

shared_fifo endpoints would only get a previous tx state cleared
out, the rx state was only cleared for non shared_fifo endpoints
Change this so that the rx state is cleared for all endpoints.
This addresses an issue that resulted in rx packets being dropped
silently.

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
drivers/usb/musb/musb_host.c

index 79cb0af..c655c71 100644 (file)
@@ -571,14 +571,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
                musb_writew(ep->regs, MUSB_TXCSR, 0);
 
        /* scrub all previous state, clearing toggle */
-       } else {
-               csr = musb_readw(ep->regs, MUSB_RXCSR);
-               if (csr & MUSB_RXCSR_RXPKTRDY)
-                       WARNING("rx%d, packet/%d ready?\n", ep->epnum,
-                               musb_readw(ep->regs, MUSB_RXCOUNT));
-
-               musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
        }
+       csr = musb_readw(ep->regs, MUSB_RXCSR);
+       if (csr & MUSB_RXCSR_RXPKTRDY)
+               WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+                       musb_readw(ep->regs, MUSB_RXCOUNT));
+
+       musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
 
        /* target addr and (for multipoint) hub addr/port */
        if (musb->is_multipoint) {