[POWERPC] Update the SWIM3 (powermac) floppy driver
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Mon, 3 Jul 2006 07:25:26 +0000 (17:25 +1000)
committerPaul Mackerras <paulus@samba.org>
Mon, 3 Jul 2006 07:25:26 +0000 (17:25 +1000)
Port the PowerMac floppy driver (swim3) to use the macio device
infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
drivers/block/swim3.c

index 3721e12..cc42e76 100644 (file)
@@ -250,8 +250,6 @@ static int floppy_open(struct inode *inode, struct file *filp);
 static int floppy_release(struct inode *inode, struct file *filp);
 static int floppy_check_change(struct gendisk *disk);
 static int floppy_revalidate(struct gendisk *disk);
-static int swim3_add_device(struct device_node *swims);
-int swim3_init(void);
 
 #ifndef CONFIG_PMAC_MEDIABAY
 #define check_media_bay(which, what)   1
@@ -1011,114 +1009,63 @@ static struct block_device_operations floppy_fops = {
        .revalidate_disk= floppy_revalidate,
 };
 
-int swim3_init(void)
-{
-       struct device_node *swim;
-       int err = -ENOMEM;
-       int i;
-
-       swim = find_devices("floppy");
-       while (swim && (floppy_count < MAX_FLOPPIES))
-       {
-               swim3_add_device(swim);
-               swim = swim->next;
-       }
-
-       swim = find_devices("swim3");
-       while (swim && (floppy_count < MAX_FLOPPIES))
-       {
-               swim3_add_device(swim);
-               swim = swim->next;
-       }
-
-       if (!floppy_count)
-               return -ENODEV;
-
-       for (i = 0; i < floppy_count; i++) {
-               disks[i] = alloc_disk(1);
-               if (!disks[i])
-                       goto out;
-       }
-
-       if (register_blkdev(FLOPPY_MAJOR, "fd")) {
-               err = -EBUSY;
-               goto out;
-       }
-
-       swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
-       if (!swim3_queue) {
-               err = -ENOMEM;
-               goto out_queue;
-       }
-
-       for (i = 0; i < floppy_count; i++) {
-               struct gendisk *disk = disks[i];
-               disk->major = FLOPPY_MAJOR;
-               disk->first_minor = i;
-               disk->fops = &floppy_fops;
-               disk->private_data = &floppy_states[i];
-               disk->queue = swim3_queue;
-               disk->flags |= GENHD_FL_REMOVABLE;
-               sprintf(disk->disk_name, "fd%d", i);
-               set_capacity(disk, 2880);
-               add_disk(disk);
-       }
-       return 0;
-
-out_queue:
-       unregister_blkdev(FLOPPY_MAJOR, "fd");
-out:
-       while (i--)
-               put_disk(disks[i]);
-       /* shouldn't we do something with results of swim_add_device()? */
-       return err;
-}
-
-static int swim3_add_device(struct device_node *swim)
+static int swim3_add_device(struct macio_dev *mdev, int index)
 {
+       struct device_node *swim = mdev->ofdev.node;
        struct device_node *mediabay;
-       struct floppy_state *fs = &floppy_states[floppy_count];
-       struct resource res_reg, res_dma;
+       struct floppy_state *fs = &floppy_states[index];
+       int rc = -EBUSY;
 
-       if (of_address_to_resource(swim, 0, &res_reg) ||
-           of_address_to_resource(swim, 1, &res_dma)) {
-               printk(KERN_ERR "swim3: Can't get addresses\n");
-               return -EINVAL;
+       /* Check & Request resources */
+       if (macio_resource_count(mdev) < 2) {
+               printk(KERN_WARNING "ifd%d: no address for %s\n",
+                      index, swim->full_name);
+               return -ENXIO;
        }
-       if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
-                              " (reg)") == NULL) {
-               printk(KERN_ERR "swim3: Can't request register space\n");
-               return -EINVAL;
+       if (macio_irq_count(mdev) < 2) {
+               printk(KERN_WARNING "fd%d: no intrs for device %s\n",
+                       index, swim->full_name);
        }
-       if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
-                              " (dma)") == NULL) {
-               release_mem_region(res_reg.start,
-                                  res_reg.end - res_reg.start + 1);
-               printk(KERN_ERR "swim3: Can't request DMA space\n");
-               return -EINVAL;
+       if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
+               printk(KERN_ERR "fd%d: can't request mmio resource for %s\n",
+                      index, swim->full_name);
+               return -EBUSY;
        }
-
-       if (swim->n_intrs < 2) {
-               printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
-                      swim->n_intrs);
-               release_mem_region(res_reg.start,
-                                  res_reg.end - res_reg.start + 1);
-               release_mem_region(res_dma.start,
-                                  res_dma.end - res_dma.start + 1);
-               return -EINVAL;
+       if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
+               printk(KERN_ERR "fd%d: can't request dma resource for %s\n",
+                      index, swim->full_name);
+               macio_release_resource(mdev, 0);
+               return -EBUSY;
        }
+       dev_set_drvdata(&mdev->ofdev.dev, fs);
 
-       mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? swim->parent : NULL;
+       mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
+               swim->parent : NULL;
        if (mediabay == NULL)
                pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
        
        memset(fs, 0, sizeof(*fs));
        spin_lock_init(&fs->lock);
        fs->state = idle;
-       fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
-       fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
-       fs->swim3_intr = swim->intrs[0].line;
-       fs->dma_intr = swim->intrs[1].line;
+       fs->swim3 = (struct swim3 __iomem *)
+               ioremap(macio_resource_start(mdev, 0), 0x200);
+       if (fs->swim3 == NULL) {
+               printk("fd%d: couldn't map registers for %s\n",
+                      index, swim->full_name);
+               rc = -ENOMEM;
+               goto out_release;
+       }
+       fs->dma = (struct dbdma_regs __iomem *)
+               ioremap(macio_resource_start(mdev, 1), 0x200);
+       if (fs->dma == NULL) {
+               printk("fd%d: couldn't map DMA for %s\n",
+                      index, swim->full_name);
+               iounmap(fs->swim3);
+               rc = -ENOMEM;
+               goto out_release;
+       }
+       fs->swim3_intr = macio_irq(mdev, 0);
+       fs->dma_intr = macio_irq(mdev, 1);;
        fs->cur_cyl = -1;
        fs->cur_sector = -1;
        fs->secpercyl = 36;
@@ -1132,15 +1079,16 @@ static int swim3_add_device(struct device_node *swim)
        st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
 
        if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
-               printk(KERN_ERR "Couldn't get irq %d for SWIM3\n", fs->swim3_intr);
+               printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n",
+                      index, fs->swim3_intr, swim->full_name);
                pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
+               goto out_unmap;
                return -EBUSY;
        }
 /*
        if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
                printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
                       fs->dma_intr);
-               pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
                return -EBUSY;
        }
 */
@@ -1150,8 +1098,90 @@ static int swim3_add_device(struct device_node *swim)
        printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
                mediabay ? "in media bay" : "");
 
-       floppy_count++;
-       
+       return 0;
+
+ out_unmap:
+       iounmap(fs->dma);
+       iounmap(fs->swim3);
+
+ out_release:
+       macio_release_resource(mdev, 0);
+       macio_release_resource(mdev, 1);
+
+       return rc;
+}
+
+static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match)
+{
+       int i, rc;
+       struct gendisk *disk;
+
+       /* Add the drive */
+       rc = swim3_add_device(mdev, floppy_count);
+       if (rc)
+               return rc;
+
+       /* Now create the queue if not there yet */
+       if (swim3_queue == NULL) {
+               /* If we failed, there isn't much we can do as the driver is still
+                * too dumb to remove the device, just bail out
+                */
+               if (register_blkdev(FLOPPY_MAJOR, "fd"))
+                       return 0;
+               swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
+               if (swim3_queue == NULL) {
+                       unregister_blkdev(FLOPPY_MAJOR, "fd");
+                       return 0;
+               }
+       }
+
+       /* Now register that disk. Same comment about failure handling */
+       i = floppy_count++;
+       disk = disks[i] = alloc_disk(1);
+       if (disk == NULL)
+               return 0;
+
+       disk->major = FLOPPY_MAJOR;
+       disk->first_minor = i;
+       disk->fops = &floppy_fops;
+       disk->private_data = &floppy_states[i];
+       disk->queue = swim3_queue;
+       disk->flags |= GENHD_FL_REMOVABLE;
+       sprintf(disk->disk_name, "fd%d", i);
+       set_capacity(disk, 2880);
+       add_disk(disk);
+
+       return 0;
+}
+
+static struct of_device_id swim3_match[] =
+{
+       {
+       .name           = "swim3",
+       },
+       {
+       .compatible     = "ohare-swim3"
+       },
+       {
+       .compatible     = "swim3"
+       },
+};
+
+static struct macio_driver swim3_driver =
+{
+       .name           = "swim3",
+       .match_table    = swim3_match,
+       .probe          = swim3_attach,
+#if 0
+       .suspend        = swim3_suspend,
+       .resume         = swim3_resume,
+#endif
+};
+
+
+int swim3_init(void)
+{
+       macio_register_driver(&swim3_driver);
        return 0;
 }