-#if (!defined(dprintk))
+#ifndef dprintk
# define dprintk(x)
#endif
/* eg: if (nblank(dprintk(x))) */
/*
* Firmware constants
*/
-
+
#define CT_NONE 0
-#define CT_OK 218
+#define CT_OK 218
#define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */
#define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */
struct sgmap {
__le32 count;
- struct sgentry sg[1];
+ struct sgentry sg[1];
};
struct user_sgmap {
u32 count;
- struct user_sgentry sg[1];
+ struct user_sgentry sg[1];
};
struct sgmap64 {
struct creation_info
{
- u8 buildnum; /* e.g., 588 */
- u8 usec; /* e.g., 588 */
- u8 via; /* e.g., 1 = FSU,
- * 2 = API
+ u8 buildnum; /* e.g., 588 */
+ u8 usec; /* e.g., 588 */
+ u8 via; /* e.g., 1 = FSU,
+ * 2 = API
*/
- u8 year; /* e.g., 1997 = 97 */
+ u8 year; /* e.g., 1997 = 97 */
__le32 date; /*
- * unsigned Month :4; // 1 - 12
- * unsigned Day :6; // 1 - 32
- * unsigned Hour :6; // 0 - 23
- * unsigned Minute :6; // 0 - 60
- * unsigned Second :6; // 0 - 60
+ * unsigned Month :4; // 1 - 12
+ * unsigned Day :6; // 1 - 32
+ * unsigned Hour :6; // 0 - 23
+ * unsigned Minute :6; // 0 - 60
+ * unsigned Second :6; // 0 - 60
*/
__le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */
};
/*
* Set the queues on a 16 byte alignment
*/
-
+
#define QUEUE_ALIGNMENT 16
/*
* The adapter assumes the ProducerIndex and ConsumerIndex are grouped
* adjacently and in that order.
*/
-
+
struct aac_qhdr {
- __le64 header_addr;/* Address to hand the adapter to access
+ __le64 header_addr;/* Address to hand the adapter to access
to this queue head */
__le32 *producer; /* The producer index for this queue (host address) */
__le32 *consumer; /* The consumer index for this queue (host address) */
* Define all the events which the adapter would like to notify
* the host of.
*/
-
+
#define HostNormCmdQue 1 /* Change in host normal priority command queue */
#define HostHighCmdQue 2 /* Change in host high priority command queue */
#define HostNormRespQue 3 /* Change in host normal priority response queue */
u8 StructType; /* Type FIB */
u8 Flags; /* Flags for FIB */
__le16 Size; /* Size of this FIB in bytes */
- __le16 SenderSize; /* Size of the FIB in the sender
+ __le16 SenderSize; /* Size of the FIB in the sender
(for response sizing) */
__le32 SenderFibAddress; /* Host defined data in the FIB */
- __le32 ReceiverFibAddress;/* Logical address of this FIB for
+ __le32 ReceiverFibAddress;/* Logical address of this FIB for
the adapter */
u32 SenderData; /* Place holder for the sender to store data */
union {
struct {
- __le32 _ReceiverTimeStart; /* Timestamp for
+ __le32 _ReceiverTimeStart; /* Timestamp for
receipt of fib */
- __le32 _ReceiverTimeDone; /* Timestamp for
+ __le32 _ReceiverTimeDone; /* Timestamp for
completion of fib */
} _s;
} _u;
* FIB commands
*/
-#define TestCommandResponse 1
+#define TestCommandResponse 1
#define TestAdapterCommand 2
/*
* Lowlevel and comm commands
#define ContainerCommand 500
#define ContainerCommand64 501
#define ContainerRawIo 502
-/*
- * Cluster Commands
- */
-#define ClusterCommand 550
/*
* Scsi Port commands (scsi passthrough)
*/
*/
enum fib_xfer_state {
- HostOwned = (1<<0),
- AdapterOwned = (1<<1),
- FibInitialized = (1<<2),
- FibEmpty = (1<<3),
- AllocatedFromPool = (1<<4),
- SentFromHost = (1<<5),
- SentFromAdapter = (1<<6),
- ResponseExpected = (1<<7),
- NoResponseExpected = (1<<8),
- AdapterProcessed = (1<<9),
- HostProcessed = (1<<10),
- HighPriority = (1<<11),
- NormalPriority = (1<<12),
+ HostOwned = (1<<0),
+ AdapterOwned = (1<<1),
+ FibInitialized = (1<<2),
+ FibEmpty = (1<<3),
+ AllocatedFromPool = (1<<4),
+ SentFromHost = (1<<5),
+ SentFromAdapter = (1<<6),
+ ResponseExpected = (1<<7),
+ NoResponseExpected = (1<<8),
+ AdapterProcessed = (1<<9),
+ HostProcessed = (1<<10),
+ HighPriority = (1<<11),
+ NormalPriority = (1<<12),
Async = (1<<13),
AsyncIo = (1<<13), // rpbfix: remove with new regime
PageFileIo = (1<<14), // rpbfix: remove with new regime
__le32 AdapterFibAlign;
__le32 printfbuf;
__le32 printfbufsiz;
- __le32 HostPhysMemPages; /* number of 4k pages of host
+ __le32 HostPhysMemPages; /* number of 4k pages of host
physical memory */
__le32 HostElapsedSeconds; /* number of seconds since 1970. */
/*
struct aac_driver_ident
{
- int (*init)(struct aac_dev *dev);
+ int (*init)(struct aac_dev *dev);
char * name;
char * vname;
char * model;
int quirks;
};
/*
- * Some adapter firmware needs communication memory
+ * Some adapter firmware needs communication memory
* below 2gig. This tells the init function to set the
* dma mask such that fib memory will be allocated where the
* adapter firmware can get to it.
* physically contigous block. The host structure that defines the
* commuication queues will assume they are each a separate physically
* contigous memory region that will support them all being one big
- * contigous block.
+ * contigous block.
* There is a command and response queue for each level and direction of
* commuication. These regions are accessed by both the host and adapter.
*/
-
+
struct aac_queue {
- u64 logical; /*address we give the adapter */
+ u64 logical; /*address we give the adapter */
struct aac_entry *base; /*system virtual address */
- struct aac_qhdr headers; /*producer,consumer q headers*/
- u32 entries; /*Number of queue entries */
+ struct aac_qhdr headers; /*producer,consumer q headers*/
+ u32 entries; /*Number of queue entries */
wait_queue_head_t qfull; /*Event to wait on if q full */
wait_queue_head_t cmdready; /*Cmd ready from the adapter */
- /* This is only valid for adapter to host command queues. */
- spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */
+ /* This is only valid for adapter to host command queues. */
+ spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */
spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */
- struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */
- /* only valid for command queues which receive entries from the adapter. */
+ struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */
+ /* only valid for command queues which receive entries from the adapter. */
u32 numpending; /* Number of entries on outstanding queue. */
struct aac_dev * dev; /* Back pointer to adapter structure */
};
/*
- * Message queues. The order here is important, see also the
+ * Message queues. The order here is important, see also the
* queue type ordering
*/
/*
* SaP1 Message Unit Registers
*/
-
+
struct sa_drawbridge_CSR {
- /* Offset | Name */
+ /* Offset | Name */
__le32 reserved[10]; /* 00h-27h | Reserved */
u8 LUT_Offset; /* 28h | Lookup Table Offset */
- u8 reserved1[3]; /* 29h-2bh | Reserved */
+ u8 reserved1[3]; /* 29h-2bh | Reserved */
__le32 LUT_Data; /* 2ch | Looup Table Data */
__le32 reserved2[26]; /* 30h-97h | Reserved */
__le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */
__le32 MAILBOX5; /* bch | Scratchpad 5 */
__le32 MAILBOX6; /* c0h | Scratchpad 6 */
__le32 MAILBOX7; /* c4h | Scratchpad 7 */
- __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */
- __le32 ROM_Control_Addr;/* cch | Rom Control and Address */
+ __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */
+ __le32 ROM_Control_Addr;/* cch | Rom Control and Address */
__le32 reserved3[12]; /* d0h-ffh | reserved */
__le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */
};
#define Mailbox5 SaDbCSR.MAILBOX5
#define Mailbox6 SaDbCSR.MAILBOX6
#define Mailbox7 SaDbCSR.MAILBOX7
-
+
#define DoorbellReg_p SaDbCSR.PRISETIRQ
#define DoorbellReg_s SaDbCSR.SECSETIRQ
#define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
#define DOORBELL_5 0x0020
#define DOORBELL_6 0x0040
-
+
#define PrintfReady DOORBELL_5
#define PrintfDone DOORBELL_5
-
+
struct sa_registers {
struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */
};
-
+
#define Sa_MINIPORT_REVISION 1
#define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
-#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
+#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
#define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR))
#define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR))
__le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */
__le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */
__le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */
- __le32 IISR; /* 1324h | 24h | Inbound Interrupt
+ __le32 IISR; /* 1324h | 24h | Inbound Interrupt
Status Register */
- __le32 IIMR; /* 1328h | 28h | Inbound Interrupt
- Mask Register */
+ __le32 IIMR; /* 1328h | 28h | Inbound Interrupt
+ Mask Register */
__le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */
- __le32 OISR; /* 1330h | 30h | Outbound Interrupt
+ __le32 OISR; /* 1330h | 30h | Outbound Interrupt
Status Register */
- __le32 OIMR; /* 1334h | 34h | Outbound Interrupt
+ __le32 OIMR; /* 1334h | 34h | Outbound Interrupt
Mask Register */
__le32 reserved2; /* 1338h | 38h | Reserved */
__le32 reserved3; /* 133Ch | 3Ch | Reserved */
__le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */
__le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */
- /* * Must access through ATU Inbound
- Translation Window */
+ /* * Must access through ATU Inbound
+ Translation Window */
};
struct rx_inbound {
typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
struct aac_fib_context {
- s16 type; // used for verification of structure
- s16 size;
+ s16 type; // used for verification of structure
+ s16 size;
u32 unique; // unique value representing this context
ulong jiffies; // used for cleanup - dmb changed to ulong
struct list_head next; // used to link context's into a linked list
- struct semaphore wait_sem; // this is used to wait for the next fib to arrive.
+ struct semaphore wait_sem; // this is used to wait for the next fib to arrive.
int wait; // Set to true when thread is in WaitForSingleObject
unsigned long count; // total number of FIBs on FibList
struct list_head fib_list; // this holds fibs and their attachd hw_fibs
u8 EOM:1; /* End Of Medium - reserved for random access devices */
u8 filemark:1; /* Filemark - reserved for random access devices */
- u8 information[4]; /* for direct-access devices, contains the unsigned
- * logical block address or residue associated with
- * the sense key
+ u8 information[4]; /* for direct-access devices, contains the unsigned
+ * logical block address or residue associated with
+ * the sense key
*/
u8 add_sense_len; /* number of additional sense bytes to follow this field */
u8 cmnd_info[4]; /* not used */
u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data
* was in error
*/
- u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that
+ u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that
* the bit_ptr field has valid value
*/
u8 reserved2:2;
/*
* The Adapter that this I/O is destined for.
*/
- struct aac_dev *dev;
+ struct aac_dev *dev;
/*
* This is the event the sendfib routine will wait on if the
* caller did not pass one and this is synch io.
*/
- struct semaphore event_wait;
+ struct semaphore event_wait;
spinlock_t event_lock;
u32 done; /* gets set to 1 when fib is complete */
- fib_callback callback;
- void *callback_data;
+ fib_callback callback;
+ void *callback_data;
u32 flags; // u32 dmb was ulong
/*
* And for the internal issue/reply queues (we may be able
* to merge these two)
*/
struct list_head fiblink;
- void *data;
+ void *data;
struct hw_fib *hw_fib_va; /* Actual shared object */
dma_addr_t hw_fib_pa; /* physical address of hw_fib*/
};
*
* This is returned by the RequestAdapterInfo block
*/
-
+
struct aac_adapter_info
{
__le32 platform;
__le32 biosrev;
__le32 biosbuild;
__le32 cluster;
- __le32 clusterchannelmask;
+ __le32 clusterchannelmask;
__le32 serial[2];
__le32 battery;
__le32 options;
#define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4)
#define AAC_OPT_RAID50 cpu_to_le32(1<<5)
#define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6)
-#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7)
+#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7)
#define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8)
-#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9)
+#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9)
#define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10)
#define AAC_OPT_ALARM cpu_to_le32(1<<11)
#define AAC_OPT_NONDASD cpu_to_le32(1<<12)
-#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13)
+#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13)
#define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14)
#define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16)
#define AAC_OPT_NEW_COMM cpu_to_le32(1<<17)
/*
* Map for 128 fib objects (64k)
- */
+ */
dma_addr_t hw_fib_pa;
struct hw_fib *hw_fib_va;
struct hw_fib *aif_base_va;
struct fib *free_fib;
spinlock_t fib_lock;
-
+
struct aac_queue_block *queues;
/*
* The user API will use an IOCTL to register itself to receive
* FIBs from the adapter. The following list is used to keep
* track of all the threads that have requested these FIBs. The
- * mutex is used to synchronize access to all data associated
+ * mutex is used to synchronize access to all data associated
* with the adapter fibs.
*/
struct list_head fib_list;
struct adapter_ops a_ops;
unsigned long fsrev; /* Main driver's revision number */
-
+
unsigned base_size; /* Size of mapped in region */
struct aac_init *init; /* Holds initialization info to communicate with adapter */
- dma_addr_t init_pa; /* Holds physical address of the init struct */
-
+ dma_addr_t init_pa; /* Holds physical address of the init struct */
+
struct pci_dev *pdev; /* Our PCI interface */
void * printfbuf; /* pointer to buffer used for printf's from the adapter */
void * comm_addr; /* Base address of Comm area */
struct fsa_dev_info *fsa_dev;
struct task_struct *thread;
int cardtype;
-
+
/*
* The following is the device specific extension.
*/
-#if (!defined(AAC_MIN_FOOTPRINT_SIZE))
+#ifndef AAC_MIN_FOOTPRINT_SIZE
# define AAC_MIN_FOOTPRINT_SIZE 8192
#endif
union
/* These are in adapter info but they are in the io flow so
* lets break them out so we don't have to do an AND to check them
*/
- u8 nondasd_support;
+ u8 nondasd_support;
u8 cache_protected;
u8 dac_support;
u8 raid_scsi_mode;
/*
* Define the command values
*/
-
+
#define Null 0
-#define GetAttributes 1
-#define SetAttributes 2
-#define Lookup 3
-#define ReadLink 4
-#define Read 5
-#define Write 6
+#define GetAttributes 1
+#define SetAttributes 2
+#define Lookup 3
+#define ReadLink 4
+#define Read 5
+#define Write 6
#define Create 7
#define MakeDirectory 8
#define SymbolicLink 9
struct aac_read
{
- __le32 command;
- __le32 cid;
- __le32 block;
- __le32 count;
+ __le32 command;
+ __le32 cid;
+ __le32 block;
+ __le32 count;
struct sgmap sg; // Must be last in struct because it is variable
};
struct aac_read64
{
- __le32 command;
- __le16 cid;
- __le16 sector_count;
- __le32 block;
+ __le32 command;
+ __le16 cid;
+ __le16 sector_count;
+ __le32 block;
__le16 pad;
__le16 flags;
struct sgmap64 sg; // Must be last in struct because it is variable
struct aac_read_reply
{
- __le32 status;
- __le32 count;
+ __le32 status;
+ __le32 count;
};
struct aac_write
{
__le32 command;
- __le32 cid;
- __le32 block;
- __le32 count;
- __le32 stable; // Not used
+ __le32 cid;
+ __le32 block;
+ __le32 count;
+ __le32 stable; // Not used
struct sgmap sg; // Must be last in struct because it is variable
};
struct aac_write64
{
- __le32 command;
- __le16 cid;
- __le16 sector_count;
- __le32 block;
+ __le32 command;
+ __le16 cid;
+ __le16 sector_count;
+ __le32 block;
__le16 pad;
__le16 flags;
#define IO_TYPE_WRITE 0x00000000
struct aac_write_reply
{
__le32 status;
- __le32 count;
+ __le32 count;
__le32 committed;
};
#define SRB_NoDataXfer 0x0000
#define SRB_DisableDisconnect 0x0004
#define SRB_DisableSynchTransfer 0x0008
-#define SRB_BypassFrozenQueue 0x0010
+#define SRB_BypassFrozenQueue 0x0010
#define SRB_DisableAutosense 0x0020
#define SRB_DataIn 0x0040
-#define SRB_DataOut 0x0080
+#define SRB_DataOut 0x0080
/*
* SRB Functions - set in aac_srb->function
#define SRBF_RemoveDevice 0x0016
#define SRBF_DomainValidation 0x0017
-/*
+/*
* SRB SCSI Status - set in aac_srb->scsi_status
*/
#define SRB_STATUS_PENDING 0x00
*/
struct aac_mntent {
- __le32 oid;
+ __le32 oid;
u8 name[16]; /* if applicable */
struct creation_info create_info; /* if applicable */
__le32 capacity;
- __le32 vol; /* substrate structure */
- __le32 obj; /* FT_FILESYS, etc. */
- __le32 state; /* unready for mounting,
+ __le32 vol; /* substrate structure */
+ __le32 obj; /* FT_FILESYS, etc. */
+ __le32 state; /* unready for mounting,
readonly, etc. */
- union aac_contentinfo fileinfo; /* Info specific to content
+ union aac_contentinfo fileinfo; /* Info specific to content
manager (eg, filesystem) */
- __le32 altoid; /* != oid <==> snapshot or
+ __le32 altoid; /* != oid <==> snapshot or
broken mirror exists */
__le32 capacityhigh;
};
struct aac_mount {
__le32 status;
- __le32 type; /* should be same as that requested */
+ __le32 type; /* should be same as that requested */
__le32 count;
struct aac_mntent mnt[1];
};
u32 disknum;
u32 cnum;
};
-
+
struct fib_ioctl
{
u32 fibctx;
__le32 version;
__le32 build;
};
-
+
/*
- * Ugly - non Linux like ioctl coding for back compat.
+ * Ugly - non Linux like ioctl coding for back compat.
*/
#define CTL_CODE(function, method) ( \
)
/*
- * Define the method codes for how buffers are passed for I/O and FS
+ * Define the method codes for how buffers are passed for I/O and FS
* controls
*/
* Filesystem ioctls
*/
-#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED)
-#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED)
+#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED)
+#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED)
#define FSACTL_DELETE_DISK 0x163
#define FSACTL_QUERY_DISK 0x173
#define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED)
#define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED)
#define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED)
#define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED)
-#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
+#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
#define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER)
#define FSACTL_GET_CONTAINERS 2131
#define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED)
struct aac_common
{
/*
- * If this value is set to 1 then interrupt moderation will occur
+ * If this value is set to 1 then interrupt moderation will occur
* in the base commuication support.
*/
u32 irq_mod;
* The following macro is used when sending and receiving FIBs. It is
* only used for debugging.
*/
-
+
#ifdef DBG
#define FIB_COUNTER_INCREMENT(counter) (counter)++
#else
-#define FIB_COUNTER_INCREMENT(counter)
+#define FIB_COUNTER_INCREMENT(counter)
#endif
/*
*
* The adapter reports is present state through the phase. Only
* a single phase should be ever be set. Each phase can have multiple
- * phase status bits to provide more detailed information about the
- * state of the board. Care should be taken to ensure that any phase
+ * phase status bits to provide more detailed information about the
+ * state of the board. Care should be taken to ensure that any phase
* status bits that are set when changing the phase are also valid
* for the new phase or be cleared out. Adapter software (monitor,
- * iflash, kernel) is responsible for properly maintining the phase
+ * iflash, kernel) is responsible for properly maintining the phase
* status mailbox when it is running.
- *
- * MONKER_API Phases
*
- * Phases are bit oriented. It is NOT valid to have multiple bits set
- */
+ * MONKER_API Phases
+ *
+ * Phases are bit oriented. It is NOT valid to have multiple bits set
+ */
#define SELF_TEST_FAILED 0x00000004
#define MONITOR_PANIC 0x00000020
* For FIB communication, we need all of the following things
* to send back to the user.
*/
-
-#define AifCmdEventNotify 1 /* Notify of event */
+
+#define AifCmdEventNotify 1 /* Notify of event */
#define AifEnConfigChange 3 /* Adapter configuration change */
#define AifEnContainerChange 4 /* Container configuration change */
#define AifEnDeviceFailure 5 /* SCSI device failed */
#define AifDenVolumeExtendComplete 201 /* A volume extend completed */
#define AifReqJobList 100 /* Gets back complete job list */
#define AifReqJobsForCtr 101 /* Gets back jobs for specific container */
-#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */
-#define AifReqJobReport 103 /* Gets back a specific job report or list of them */
+#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */
+#define AifReqJobReport 103 /* Gets back a specific job report or list of them */
#define AifReqTerminateJob 104 /* Terminates job */
#define AifReqSuspendJob 105 /* Suspends a job */
-#define AifReqResumeJob 106 /* Resumes a job */
+#define AifReqResumeJob 106 /* Resumes a job */
#define AifReqSendAPIReport 107 /* API generic report requests */
#define AifReqAPIJobStart 108 /* Start a job from the API */
#define AifReqAPIJobUpdate 109 /* Update a job report from the API */
};
/**
- * Convert capacity to cylinders
- * accounting for the fact capacity could be a 64 bit value
+ * Convert capacity to cylinders
+ * accounting for the fact capacity could be a 64 bit value
*
*/
static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
git.openpandora.org / pandora-kernel.git / blobdiff