Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family Added new hardware device 0x28b interface for PMC-Sierra's SRC based controller family. - new src.c file for 0x28b specific functions - new XPORT header required - sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT) - async. Interface: different inbound queue handling, no outbound I2O queue available, using doorbell ("PmDoorBellResponseSent") and response buffer on the host ("host_rrq") for status - changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending" bit to inform about pending AIF, "AifRequest" command to read AIF, "NoMoreAifDataAvailable" to mark the end of the AIFs Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
[SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline Problem description: -------------------- The problem reported by one of the customer was when a logical array is deleted(from the SDK, from the GUI, from arcconf) then the corresponding physical device (/dev/sdb, for example) is not removed from the Linux namespace. So you end up with a "dead" device entry. And some of the linux tools go slightly wonky. Solution: --------- Based on the notification from FW, the driver calls "scsi_remove_device" for the DELETED drive. This call not only informs the scsi device status to the SCSI mid layer and also it will remove corresponding scsi device entries from the Linux sysfs. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
[SCSI] aacraid: respond automatically to volumes added by config tool Problem description: -------------------- When the JBOD is created from the OS using Adaptec Storage Manager utility device is not available under FDISK until a system restart is done. Solution: --------- AIF handling: If there is a JBOD drive added to the system, identify the old one with scsi_device_lookup() and remove it to enable a fresh scsi_add_device(); else the new JBOD is not available until reboot. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
tree-wide: fix assorted typos all over the place That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[SCSI] aacraid driver update changes: - set aac_cache=2 as default value to avoid performance problem (Novell bugzilla #469922) - Dell/PERC controller boot problem fixed (RedHat bugzilla #457552) - WWN flag added to fix SLES10 SP1/SP2 drive detection problems - 64-bit support changes - DECLARE_PCI_DEVICE_TABLE macro added - controller type changes Signed-off-by: Achim Leubner <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: Add Power Management support For firmware that supports the feature(s), add the ability to start or stop an array using the associated SCSI commands, to automatically manage the spin-up of an array on new I/O reporting back the appropriate check conditions and actions in cooperation with the normal timeout mechanisms and enable the blackout period management in the Firmware associated with the background spin-down of the arrays when the Firmware times out and deems the arrays as idle. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: Fix warning about macro side-effects On some compile environments, warnings are produced regarding the usage of aac_logical_to_phys macro. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[SCSI] aacraid: add optional MSI support Added support for MSI utilizing the aacraid.msi=1 parameter. This patch adds some localized or like-minded janitor fixes. Since the default is disabled, there is no impact on the code paths unless the customer wishes to experiment with the MSI performance. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: add Voodoo Lite class of cards. The cards being added are supported in a limited sense already through family matching, but we needed to add some functionality to the driver to expose selectively the physical drives. These Physical drives are specifically marked to not be part of any array and thus are declared JBODs (Just a Bunch Of Drives) for generic SCSI access. We report that this is the second patch in a set of two, but merely depends on the stand-alone functionality of the first patch which adds in that case the ability to report a driver feature flag via sysfs. We leverage that functionality by reporting that this driver now supports this new JBOD feature for the controller so that the array management applications may react accordingly and guide the user as they manage the controller. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: remove pigs in space I was amazed at how much embedded space was present in the aacraid driver source files. Just selected five files from the set to clean up for now and the attached patch swelled to 73K in size! - Removed trailing space or tabs - Removed spaces embedded within tabs - Replaced leading 8 spaces with tabs - Removed spaces before ) - Removed ClusterCommand as it was unused (noticed it as one triggered by above) - Replaced scsi_status comparison with 0x02, to compare against SAM_STATUS_CHECK_CONDITION. - Replaced a long series of spaces with tabs - Replaced some simple if...defined() with ifdef/ifndef Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: respond to enclosure service events Added support to respond to enclosure service events (controller AIFs) to add, online or offline physical targets reported to sg. Also added online and offlining of arrays. Removed an automatic variable definition in a sub block that hid an earlier definition, determined to be inert as the sub-block use did not interfere. Bumped the driver versioning to stamp the addition of this feature. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: OS panic after Adapter panic (hardening). In experiments in the lab we managed to trigger an Adapter firmware panic (BlinkLED) coincidentally while several pass-through ioctl command from the management software were outstanding on a bug only present on a class of RAID Adapters that require a hardware reset rather than a commanded reset. The net result was an attempt to time out the management software command as if it came from the SCSI layer resulting in an OS panic. Adapters that use commanded reset, management commands are returned failed by the Adapter correctly. The adapter firmware panic that resulted in this condition was also resolved, and there were no adapters in the field with this specific firmware bug so we do not expect any field reports. This is a rare or unlikely corner condition, and no reports have ever been forwarded from the field. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: fix big endian issues Big endian systems issues discovered in the aacraid driver. Somewhat reverses a patch from November 7th of last year that removed swap operations because they formerly were being assigned to an u8 array when they should have been assigned to an le32 array. This patch is largely inert for any little endian processor architecture. It resolves a bug in delivering the BlinkLED AIF event to registered applications when the adapter or associated hardware was reset due to ill health. A rare corner case occurrence, also largely unnoticed by any as it was a new (untested!) feature. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: add sysfs report of RAID level Report the RAID level string for the SCSI device representing the array. Report is in /sys/class/scsi_device/#:#:#:#/device/level. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: add parameter to control FUA and SYNCHRONIZE_CACHE policy aacraid.cache parameter, Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery not protecting adapter supplied Cache e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE commands if the adapter has reported that it's cache is battery backed up. This parameter permits experimentation with tradeoffs between performance and caching policy. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] aacraid: fix driver failure with Dell PowerEdge Expandable RAID Controller 3/Di As reported in http://bugzilla.kernel.org/show_bug.cgi?id=3D9133 it was discovered that the PERC line of controllers lacked a key 64 bit ScatterGather capable SCSI pass-through function. The adapters are still capable of 64 bit ScatterGather I/O commands, but these two can not be mixed. This problem was exacerbated by the introduction of the SCSI Generic access to the DASD physical devices. The fix for users before this patch is applied is aacraid.dacmode=3D0 on the kernel command line to disable 64 bit I/O. The enclosed patch introduces a new adapter quirk and tries to limp along by enabling pass-through in situations where memory is 32 bit addressable on 64 bit machines, or disable the pass-through functions altogether. I expect that the check for 32 bit addressable memory to be controversial in that it can be incorrect in non-Dell non-Intel systems that PERC would never be installed under, the alternative is to disable pass-through in all cases which could be reported as another regression. Pass-through is used for SCSI Generic access to the physical devices, or for the management applications to properly function. In systems where this patch has disabled pass-through because it is unsupportable in combination with I/O performance, the user can choose to enable pass-through by turning off dacmode (aacraid.dacmode=3D0) or limiting the discovered kernel memory (mem=3D4G) with an associated loss in runtime performance. If we chose instead to turn off 64 bit dacmode for the adapters with this quirk, then this would be reported as another regression. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>