Merge branch 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel...
[pandora-kernel.git] / include / net / caif / cfcnfg.h
1 /*
2  * Copyright (C) ST-Ericsson AB 2010
3  * Author:      Sjur Brendeland/sjur.brandeland@stericsson.com
4  * License terms: GNU General Public License (GPL) version 2
5  */
6
7 #ifndef CFCNFG_H_
8 #define CFCNFG_H_
9 #include <linux/spinlock.h>
10 #include <linux/netdevice.h>
11 #include <net/caif/caif_layer.h>
12 #include <net/caif/cfctrl.h>
13
14 struct cfcnfg;
15
16 /**
17  * enum cfcnfg_phy_type -  Types of physical layers defined in CAIF Stack
18  *
19  * @CFPHYTYPE_FRAG:     Fragmented frames physical interface.
20  * @CFPHYTYPE_CAIF:     Generic CAIF physical interface
21  */
22 enum cfcnfg_phy_type {
23         CFPHYTYPE_FRAG = 1,
24         CFPHYTYPE_CAIF,
25         CFPHYTYPE_MAX
26 };
27
28 /**
29  * enum cfcnfg_phy_preference - Physical preference HW Abstraction
30  *
31  * @CFPHYPREF_UNSPECIFIED:      Default physical interface
32  *
33  * @CFPHYPREF_LOW_LAT:          Default physical interface for low-latency
34  *                              traffic
35  * @CFPHYPREF_HIGH_BW:          Default physical interface for high-bandwidth
36  *                              traffic
37  * @CFPHYPREF_LOOP:             TEST only Loopback interface simulating modem
38  *                              responses.
39  *
40  */
41 enum cfcnfg_phy_preference {
42         CFPHYPREF_UNSPECIFIED,
43         CFPHYPREF_LOW_LAT,
44         CFPHYPREF_HIGH_BW,
45         CFPHYPREF_LOOP
46 };
47
48 /**
49  * cfcnfg_create() - Create the CAIF configuration object.
50  */
51 struct cfcnfg *cfcnfg_create(void);
52
53 /**
54  * cfcnfg_remove() -  Remove the CFCNFG object
55  * @cfg: config object
56  */
57 void cfcnfg_remove(struct cfcnfg *cfg);
58
59 /**
60  * cfcnfg_add_phy_layer() - Adds a physical layer to the CAIF stack.
61  * @cnfg:       Pointer to a CAIF configuration object, created by
62  *              cfcnfg_create().
63  * @phy_type:   Specifies the type of physical interface, e.g.
64  *                      CFPHYTYPE_FRAG.
65  * @dev:        Pointer to link layer device
66  * @phy_layer:  Specify the physical layer. The transmit function
67  *              MUST be set in the structure.
68  * @phyid:      The assigned physical ID for this layer, used in
69  *              cfcnfg_add_adapt_layer to specify PHY for the link.
70  * @pref:       The phy (link layer) preference.
71  * @fcs:        Specify if checksum is used in CAIF Framing Layer.
72  * @stx:        Specify if Start Of Frame eXtention is used.
73  */
74
75 void
76 cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
77                      struct net_device *dev, struct cflayer *phy_layer,
78                      u16 *phyid, enum cfcnfg_phy_preference pref,
79                      bool fcs, bool stx);
80
81 /**
82  * cfcnfg_del_phy_layer - Deletes an phy layer from the CAIF stack.
83  *
84  * @cnfg:       Pointer to a CAIF configuration object, created by
85  *              cfcnfg_create().
86  * @phy_layer:  Adaptation layer to be removed.
87  */
88 int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer);
89
90 /**
91  * cfcnfg_disconn_adapt_layer - Disconnects an adaptation layer.
92  *
93  * @cnfg:       Pointer to a CAIF configuration object, created by
94  *              cfcnfg_create().
95  * @adap_layer: Adaptation layer to be removed.
96  */
97 int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg,
98                         struct cflayer *adap_layer);
99
100 /**
101  * cfcnfg_release_adap_layer - Used by client to release the adaptation layer.
102  *
103  * @adap_layer: Adaptation layer.
104  */
105 void cfcnfg_release_adap_layer(struct cflayer *adap_layer);
106
107 /**
108  * cfcnfg_add_adaptation_layer - Add an adaptation layer to the CAIF stack.
109  *
110  * The adaptation Layer is where the interface to application or higher-level
111  * driver functionality is implemented.
112  *
113  * @cnfg:               Pointer to a CAIF configuration object, created by
114  *                      cfcnfg_create().
115  * @param:              Link setup parameters.
116  * @adap_layer:         Specify the adaptation layer; the receive and
117  *                      flow-control functions MUST be set in the structure.
118  * @ifindex:            Link layer interface index used for this connection.
119  * @proto_head:         Protocol head-space needed by CAIF protocol,
120  *                      excluding link layer.
121  * @proto_tail:         Protocol tail-space needed by CAIF protocol,
122  *                      excluding link layer.
123  */
124 int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg,
125                             struct cfctrl_link_param *param,
126                             struct cflayer *adap_layer,
127                             int *ifindex,
128                             int *proto_head,
129                             int *proto_tail);
130
131 /**
132  * cfcnfg_get_phyid() - Get physical ID, given type.
133  * Returns one of the physical interfaces matching the given type.
134  * Zero if no match is found.
135  * @cnfg:       Configuration object
136  * @phy_pref:   Caif Link Layer preference
137  */
138 struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
139                      enum cfcnfg_phy_preference phy_pref);
140
141 /**
142  * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex,
143  *                      it matches caif physical id with the kernel interface id.
144  * @cnfg:       Configuration object
145  * @ifi:        ifindex obtained from socket.c bindtodevice.
146  */
147 int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi);
148 #endif                          /* CFCNFG_H_ */