Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[pandora-kernel.git] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/irqnr.h>
12 #include <linux/hardirq.h>
13 #include <linux/sched.h>
14 #include <linux/irqflags.h>
15 #include <linux/smp.h>
16 #include <linux/percpu.h>
17 #include <linux/hrtimer.h>
18
19 #include <asm/atomic.h>
20 #include <asm/ptrace.h>
21 #include <asm/system.h>
22
23 /*
24  * These correspond to the IORESOURCE_IRQ_* defines in
25  * linux/ioport.h to select the interrupt line behaviour.  When
26  * requesting an interrupt without specifying a IRQF_TRIGGER, the
27  * setting should be assumed to be "as already configured", which
28  * may be as per machine or firmware initialisation.
29  */
30 #define IRQF_TRIGGER_NONE       0x00000000
31 #define IRQF_TRIGGER_RISING     0x00000001
32 #define IRQF_TRIGGER_FALLING    0x00000002
33 #define IRQF_TRIGGER_HIGH       0x00000004
34 #define IRQF_TRIGGER_LOW        0x00000008
35 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
36                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
37 #define IRQF_TRIGGER_PROBE      0x00000010
38
39 /*
40  * These flags used only by the kernel as part of the
41  * irq handling routines.
42  *
43  * IRQF_DISABLED - keep irqs disabled when calling the action handler
44  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
45  * IRQF_SHARED - allow sharing the irq among several devices
46  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
47  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
48  * IRQF_PERCPU - Interrupt is per cpu
49  * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
50  * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
51  *                registered first in an shared interrupt is considered for
52  *                performance reasons)
53  * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
54  *                Used by threaded interrupts which need to keep the
55  *                irq line disabled until the threaded handler has been run.
56  */
57 #define IRQF_DISABLED           0x00000020
58 #define IRQF_SAMPLE_RANDOM      0x00000040
59 #define IRQF_SHARED             0x00000080
60 #define IRQF_PROBE_SHARED       0x00000100
61 #define IRQF_TIMER              0x00000200
62 #define IRQF_PERCPU             0x00000400
63 #define IRQF_NOBALANCING        0x00000800
64 #define IRQF_IRQPOLL            0x00001000
65 #define IRQF_ONESHOT            0x00002000
66
67 /*
68  * Bits used by threaded handlers:
69  * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
70  * IRQTF_DIED      - handler thread died
71  * IRQTF_WARNED    - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
72  * IRQTF_AFFINITY  - irq thread is requested to adjust affinity
73  */
74 enum {
75         IRQTF_RUNTHREAD,
76         IRQTF_DIED,
77         IRQTF_WARNED,
78         IRQTF_AFFINITY,
79 };
80
81 typedef irqreturn_t (*irq_handler_t)(int, void *);
82
83 /**
84  * struct irqaction - per interrupt action descriptor
85  * @handler:    interrupt handler function
86  * @flags:      flags (see IRQF_* above)
87  * @mask:       no comment as it is useless and about to be removed
88  * @name:       name of the device
89  * @dev_id:     cookie to identify the device
90  * @next:       pointer to the next irqaction for shared interrupts
91  * @irq:        interrupt number
92  * @dir:        pointer to the proc/irq/NN/name entry
93  * @thread_fn:  interupt handler function for threaded interrupts
94  * @thread:     thread pointer for threaded interrupts
95  * @thread_flags:       flags related to @thread
96  */
97 struct irqaction {
98         irq_handler_t handler;
99         unsigned long flags;
100         cpumask_t mask;
101         const char *name;
102         void *dev_id;
103         struct irqaction *next;
104         int irq;
105         struct proc_dir_entry *dir;
106         irq_handler_t thread_fn;
107         struct task_struct *thread;
108         unsigned long thread_flags;
109 };
110
111 extern irqreturn_t no_action(int cpl, void *dev_id);
112
113 #ifdef CONFIG_GENERIC_HARDIRQS
114 extern int __must_check
115 request_threaded_irq(unsigned int irq, irq_handler_t handler,
116                      irq_handler_t thread_fn,
117                      unsigned long flags, const char *name, void *dev);
118
119 static inline int __must_check
120 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
121             const char *name, void *dev)
122 {
123         return request_threaded_irq(irq, handler, NULL, flags, name, dev);
124 }
125
126 extern void exit_irq_thread(void);
127 #else
128
129 extern int __must_check
130 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
131             const char *name, void *dev);
132
133 /*
134  * Special function to avoid ifdeffery in kernel/irq/devres.c which
135  * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
136  * m68k). I really love these $@%#!* obvious Makefile references:
137  * ../../../kernel/irq/devres.o
138  */
139 static inline int __must_check
140 request_threaded_irq(unsigned int irq, irq_handler_t handler,
141                      irq_handler_t thread_fn,
142                      unsigned long flags, const char *name, void *dev)
143 {
144         return request_irq(irq, handler, flags, name, dev);
145 }
146
147 static inline void exit_irq_thread(void) { }
148 #endif
149
150 extern void free_irq(unsigned int, void *);
151
152 struct device;
153
154 extern int __must_check
155 devm_request_threaded_irq(struct device *dev, unsigned int irq,
156                           irq_handler_t handler, irq_handler_t thread_fn,
157                           unsigned long irqflags, const char *devname,
158                           void *dev_id);
159
160 static inline int __must_check
161 devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
162                  unsigned long irqflags, const char *devname, void *dev_id)
163 {
164         return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
165                                          devname, dev_id);
166 }
167
168 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
169
170 /*
171  * On lockdep we dont want to enable hardirqs in hardirq
172  * context. Use local_irq_enable_in_hardirq() to annotate
173  * kernel code that has to do this nevertheless (pretty much
174  * the only valid case is for old/broken hardware that is
175  * insanely slow).
176  *
177  * NOTE: in theory this might break fragile code that relies
178  * on hardirq delivery - in practice we dont seem to have such
179  * places left. So the only effect should be slightly increased
180  * irqs-off latencies.
181  */
182 #ifdef CONFIG_LOCKDEP
183 # define local_irq_enable_in_hardirq()  do { } while (0)
184 #else
185 # define local_irq_enable_in_hardirq()  local_irq_enable()
186 #endif
187
188 extern void disable_irq_nosync(unsigned int irq);
189 extern void disable_irq(unsigned int irq);
190 extern void enable_irq(unsigned int irq);
191
192 /* The following three functions are for the core kernel use only. */
193 #ifdef CONFIG_GENERIC_HARDIRQS
194 extern void suspend_device_irqs(void);
195 extern void resume_device_irqs(void);
196 #ifdef CONFIG_PM_SLEEP
197 extern int check_wakeup_irqs(void);
198 #else
199 static inline int check_wakeup_irqs(void) { return 0; }
200 #endif
201 #else
202 static inline void suspend_device_irqs(void) { };
203 static inline void resume_device_irqs(void) { };
204 static inline int check_wakeup_irqs(void) { return 0; }
205 #endif
206
207 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
208
209 extern cpumask_var_t irq_default_affinity;
210
211 extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
212 extern int irq_can_set_affinity(unsigned int irq);
213 extern int irq_select_affinity(unsigned int irq);
214
215 #else /* CONFIG_SMP */
216
217 static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
218 {
219         return -EINVAL;
220 }
221
222 static inline int irq_can_set_affinity(unsigned int irq)
223 {
224         return 0;
225 }
226
227 static inline int irq_select_affinity(unsigned int irq)  { return 0; }
228
229 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
230
231 #ifdef CONFIG_GENERIC_HARDIRQS
232 /*
233  * Special lockdep variants of irq disabling/enabling.
234  * These should be used for locking constructs that
235  * know that a particular irq context which is disabled,
236  * and which is the only irq-context user of a lock,
237  * that it's safe to take the lock in the irq-disabled
238  * section without disabling hardirqs.
239  *
240  * On !CONFIG_LOCKDEP they are equivalent to the normal
241  * irq disable/enable methods.
242  */
243 static inline void disable_irq_nosync_lockdep(unsigned int irq)
244 {
245         disable_irq_nosync(irq);
246 #ifdef CONFIG_LOCKDEP
247         local_irq_disable();
248 #endif
249 }
250
251 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
252 {
253         disable_irq_nosync(irq);
254 #ifdef CONFIG_LOCKDEP
255         local_irq_save(*flags);
256 #endif
257 }
258
259 static inline void disable_irq_lockdep(unsigned int irq)
260 {
261         disable_irq(irq);
262 #ifdef CONFIG_LOCKDEP
263         local_irq_disable();
264 #endif
265 }
266
267 static inline void enable_irq_lockdep(unsigned int irq)
268 {
269 #ifdef CONFIG_LOCKDEP
270         local_irq_enable();
271 #endif
272         enable_irq(irq);
273 }
274
275 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
276 {
277 #ifdef CONFIG_LOCKDEP
278         local_irq_restore(*flags);
279 #endif
280         enable_irq(irq);
281 }
282
283 /* IRQ wakeup (PM) control: */
284 extern int set_irq_wake(unsigned int irq, unsigned int on);
285
286 static inline int enable_irq_wake(unsigned int irq)
287 {
288         return set_irq_wake(irq, 1);
289 }
290
291 static inline int disable_irq_wake(unsigned int irq)
292 {
293         return set_irq_wake(irq, 0);
294 }
295
296 #else /* !CONFIG_GENERIC_HARDIRQS */
297 /*
298  * NOTE: non-genirq architectures, if they want to support the lock
299  * validator need to define the methods below in their asm/irq.h
300  * files, under an #ifdef CONFIG_LOCKDEP section.
301  */
302 #ifndef CONFIG_LOCKDEP
303 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
304 #  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
305                                                 disable_irq_nosync(irq)
306 #  define disable_irq_lockdep(irq)              disable_irq(irq)
307 #  define enable_irq_lockdep(irq)               enable_irq(irq)
308 #  define enable_irq_lockdep_irqrestore(irq, flags) \
309                                                 enable_irq(irq)
310 # endif
311
312 static inline int enable_irq_wake(unsigned int irq)
313 {
314         return 0;
315 }
316
317 static inline int disable_irq_wake(unsigned int irq)
318 {
319         return 0;
320 }
321 #endif /* CONFIG_GENERIC_HARDIRQS */
322
323 #ifndef __ARCH_SET_SOFTIRQ_PENDING
324 #define set_softirq_pending(x) (local_softirq_pending() = (x))
325 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
326 #endif
327
328 /* Some architectures might implement lazy enabling/disabling of
329  * interrupts. In some cases, such as stop_machine, we might want
330  * to ensure that after a local_irq_disable(), interrupts have
331  * really been disabled in hardware. Such architectures need to
332  * implement the following hook.
333  */
334 #ifndef hard_irq_disable
335 #define hard_irq_disable()      do { } while(0)
336 #endif
337
338 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
339    frequency threaded job scheduling. For almost all the purposes
340    tasklets are more than enough. F.e. all serial device BHs et
341    al. should be converted to tasklets, not to softirqs.
342  */
343
344 enum
345 {
346         HI_SOFTIRQ=0,
347         TIMER_SOFTIRQ,
348         NET_TX_SOFTIRQ,
349         NET_RX_SOFTIRQ,
350         BLOCK_SOFTIRQ,
351         TASKLET_SOFTIRQ,
352         SCHED_SOFTIRQ,
353         HRTIMER_SOFTIRQ,
354         RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
355
356         NR_SOFTIRQS
357 };
358
359 /* map softirq index to softirq name. update 'softirq_to_name' in
360  * kernel/softirq.c when adding a new softirq.
361  */
362 extern char *softirq_to_name[NR_SOFTIRQS];
363
364 /* softirq mask and active fields moved to irq_cpustat_t in
365  * asm/hardirq.h to get better cache usage.  KAO
366  */
367
368 struct softirq_action
369 {
370         void    (*action)(struct softirq_action *);
371 };
372
373 asmlinkage void do_softirq(void);
374 asmlinkage void __do_softirq(void);
375 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
376 extern void softirq_init(void);
377 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
378 extern void raise_softirq_irqoff(unsigned int nr);
379 extern void raise_softirq(unsigned int nr);
380 extern void wakeup_softirqd(void);
381
382 /* This is the worklist that queues up per-cpu softirq work.
383  *
384  * send_remote_sendirq() adds work to these lists, and
385  * the softirq handler itself dequeues from them.  The queues
386  * are protected by disabling local cpu interrupts and they must
387  * only be accessed by the local cpu that they are for.
388  */
389 DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
390
391 /* Try to send a softirq to a remote cpu.  If this cannot be done, the
392  * work will be queued to the local cpu.
393  */
394 extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
395
396 /* Like send_remote_softirq(), but the caller must disable local cpu interrupts
397  * and compute the current cpu, passed in as 'this_cpu'.
398  */
399 extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
400                                   int this_cpu, int softirq);
401
402 /* Tasklets --- multithreaded analogue of BHs.
403
404    Main feature differing them of generic softirqs: tasklet
405    is running only on one CPU simultaneously.
406
407    Main feature differing them of BHs: different tasklets
408    may be run simultaneously on different CPUs.
409
410    Properties:
411    * If tasklet_schedule() is called, then tasklet is guaranteed
412      to be executed on some cpu at least once after this.
413    * If the tasklet is already scheduled, but its excecution is still not
414      started, it will be executed only once.
415    * If this tasklet is already running on another CPU (or schedule is called
416      from tasklet itself), it is rescheduled for later.
417    * Tasklet is strictly serialized wrt itself, but not
418      wrt another tasklets. If client needs some intertask synchronization,
419      he makes it with spinlocks.
420  */
421
422 struct tasklet_struct
423 {
424         struct tasklet_struct *next;
425         unsigned long state;
426         atomic_t count;
427         void (*func)(unsigned long);
428         unsigned long data;
429 };
430
431 #define DECLARE_TASKLET(name, func, data) \
432 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
433
434 #define DECLARE_TASKLET_DISABLED(name, func, data) \
435 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
436
437
438 enum
439 {
440         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
441         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
442 };
443
444 #ifdef CONFIG_SMP
445 static inline int tasklet_trylock(struct tasklet_struct *t)
446 {
447         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
448 }
449
450 static inline void tasklet_unlock(struct tasklet_struct *t)
451 {
452         smp_mb__before_clear_bit(); 
453         clear_bit(TASKLET_STATE_RUN, &(t)->state);
454 }
455
456 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
457 {
458         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
459 }
460 #else
461 #define tasklet_trylock(t) 1
462 #define tasklet_unlock_wait(t) do { } while (0)
463 #define tasklet_unlock(t) do { } while (0)
464 #endif
465
466 extern void __tasklet_schedule(struct tasklet_struct *t);
467
468 static inline void tasklet_schedule(struct tasklet_struct *t)
469 {
470         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
471                 __tasklet_schedule(t);
472 }
473
474 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
475
476 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
477 {
478         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
479                 __tasklet_hi_schedule(t);
480 }
481
482 extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
483
484 /*
485  * This version avoids touching any other tasklets. Needed for kmemcheck
486  * in order not to take any page faults while enqueueing this tasklet;
487  * consider VERY carefully whether you really need this or
488  * tasklet_hi_schedule()...
489  */
490 static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
491 {
492         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
493                 __tasklet_hi_schedule_first(t);
494 }
495
496
497 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
498 {
499         atomic_inc(&t->count);
500         smp_mb__after_atomic_inc();
501 }
502
503 static inline void tasklet_disable(struct tasklet_struct *t)
504 {
505         tasklet_disable_nosync(t);
506         tasklet_unlock_wait(t);
507         smp_mb();
508 }
509
510 static inline void tasklet_enable(struct tasklet_struct *t)
511 {
512         smp_mb__before_atomic_dec();
513         atomic_dec(&t->count);
514 }
515
516 static inline void tasklet_hi_enable(struct tasklet_struct *t)
517 {
518         smp_mb__before_atomic_dec();
519         atomic_dec(&t->count);
520 }
521
522 extern void tasklet_kill(struct tasklet_struct *t);
523 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
524 extern void tasklet_init(struct tasklet_struct *t,
525                          void (*func)(unsigned long), unsigned long data);
526
527 struct tasklet_hrtimer {
528         struct hrtimer          timer;
529         struct tasklet_struct   tasklet;
530         enum hrtimer_restart    (*function)(struct hrtimer *);
531 };
532
533 extern void
534 tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
535                      enum hrtimer_restart (*function)(struct hrtimer *),
536                      clockid_t which_clock, enum hrtimer_mode mode);
537
538 static inline
539 int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
540                           const enum hrtimer_mode mode)
541 {
542         return hrtimer_start(&ttimer->timer, time, mode);
543 }
544
545 static inline
546 void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
547 {
548         hrtimer_cancel(&ttimer->timer);
549         tasklet_kill(&ttimer->tasklet);
550 }
551
552 /*
553  * Autoprobing for irqs:
554  *
555  * probe_irq_on() and probe_irq_off() provide robust primitives
556  * for accurate IRQ probing during kernel initialization.  They are
557  * reasonably simple to use, are not "fooled" by spurious interrupts,
558  * and, unlike other attempts at IRQ probing, they do not get hung on
559  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
560  *
561  * For reasonably foolproof probing, use them as follows:
562  *
563  * 1. clear and/or mask the device's internal interrupt.
564  * 2. sti();
565  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
566  * 4. enable the device and cause it to trigger an interrupt.
567  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
568  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
569  * 7. service the device to clear its pending interrupt.
570  * 8. loop again if paranoia is required.
571  *
572  * probe_irq_on() returns a mask of allocated irq's.
573  *
574  * probe_irq_off() takes the mask as a parameter,
575  * and returns the irq number which occurred,
576  * or zero if none occurred, or a negative irq number
577  * if more than one irq occurred.
578  */
579
580 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
581 static inline unsigned long probe_irq_on(void)
582 {
583         return 0;
584 }
585 static inline int probe_irq_off(unsigned long val)
586 {
587         return 0;
588 }
589 static inline unsigned int probe_irq_mask(unsigned long val)
590 {
591         return 0;
592 }
593 #else
594 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
595 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
596 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
597 #endif
598
599 #ifdef CONFIG_PROC_FS
600 /* Initialize /proc/irq/ */
601 extern void init_irq_proc(void);
602 #else
603 static inline void init_irq_proc(void)
604 {
605 }
606 #endif
607
608 #if defined(CONFIG_GENERIC_HARDIRQS) && defined(CONFIG_DEBUG_SHIRQ)
609 extern void debug_poll_all_shared_irqs(void);
610 #else
611 static inline void debug_poll_all_shared_irqs(void) { }
612 #endif
613
614 int show_interrupts(struct seq_file *p, void *v);
615
616 struct irq_desc;
617
618 extern int early_irq_init(void);
619 extern int arch_probe_nr_irqs(void);
620 extern int arch_early_irq_init(void);
621 extern int arch_init_chip_data(struct irq_desc *desc, int node);
622
623 #endif