fs: limit filesystem stacking depth
[pandora-kernel.git] / include / linux / can / gw.h
1 /*
2  * linux/can/gw.h
3  *
4  * Definitions for CAN frame Gateway/Router/Bridge
5  *
6  * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
7  * Copyright (c) 2011 Volkswagen Group Electronic Research
8  * All rights reserved.
9  *
10  */
11
12 #ifndef CAN_GW_H
13 #define CAN_GW_H
14
15 #include <linux/types.h>
16 #include <linux/can.h>
17
18 struct rtcanmsg {
19         __u8  can_family;
20         __u8  gwtype;
21         __u16 flags;
22 };
23
24 /* CAN gateway types */
25 enum {
26         CGW_TYPE_UNSPEC,
27         CGW_TYPE_CAN_CAN,       /* CAN->CAN routing */
28         __CGW_TYPE_MAX
29 };
30
31 #define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1)
32
33 /* CAN rtnetlink attribute definitions */
34 enum {
35         CGW_UNSPEC,
36         CGW_MOD_AND,    /* CAN frame modification binary AND */
37         CGW_MOD_OR,     /* CAN frame modification binary OR */
38         CGW_MOD_XOR,    /* CAN frame modification binary XOR */
39         CGW_MOD_SET,    /* CAN frame modification set alternate values */
40         CGW_CS_XOR,     /* set data[] XOR checksum into data[index] */
41         CGW_CS_CRC8,    /* set data[] CRC8 checksum into data[index] */
42         CGW_HANDLED,    /* number of handled CAN frames */
43         CGW_DROPPED,    /* number of dropped CAN frames */
44         CGW_SRC_IF,     /* ifindex of source network interface */
45         CGW_DST_IF,     /* ifindex of destination network interface */
46         CGW_FILTER,     /* specify struct can_filter on source CAN device */
47         __CGW_MAX
48 };
49
50 #define CGW_MAX (__CGW_MAX - 1)
51
52 #define CGW_FLAGS_CAN_ECHO 0x01
53 #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
54
55 #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
56
57 /* CAN frame elements that are affected by curr. 3 CAN frame modifications */
58 #define CGW_MOD_ID      0x01
59 #define CGW_MOD_DLC     0x02
60 #define CGW_MOD_DATA    0x04
61
62 #define CGW_FRAME_MODS 3 /* ID DLC DATA */
63
64 #define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS)
65
66 struct cgw_frame_mod {
67         struct can_frame cf;
68         __u8 modtype;
69 } __attribute__((packed));
70
71 #define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod)
72
73 struct cgw_csum_xor {
74         __s8 from_idx;
75         __s8 to_idx;
76         __s8 result_idx;
77         __u8 init_xor_val;
78 } __attribute__((packed));
79
80 struct cgw_csum_crc8 {
81         __s8 from_idx;
82         __s8 to_idx;
83         __s8 result_idx;
84         __u8 init_crc_val;
85         __u8 final_xor_val;
86         __u8 crctab[256];
87         __u8 profile;
88         __u8 profile_data[20];
89 } __attribute__((packed));
90
91 /* length of checksum operation parameters. idx = index in CAN frame data[] */
92 #define CGW_CS_XOR_LEN  sizeof(struct cgw_csum_xor)
93 #define CGW_CS_CRC8_LEN  sizeof(struct cgw_csum_crc8)
94
95 /* CRC8 profiles (compute CRC for additional data elements - see below) */
96 enum {
97         CGW_CRC8PRF_UNSPEC,
98         CGW_CRC8PRF_1U8,        /* compute one additional u8 value */
99         CGW_CRC8PRF_16U8,       /* u8 value table indexed by data[1] & 0xF */
100         CGW_CRC8PRF_SFFID_XOR,  /* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */
101         __CGW_CRC8PRF_MAX
102 };
103
104 #define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1)
105
106 /*
107  * CAN rtnetlink attribute contents in detail
108  *
109  * CGW_XXX_IF (length 4 bytes):
110  * Sets an interface index for source/destination network interfaces.
111  * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory.
112  *
113  * CGW_FILTER (length 8 bytes):
114  * Sets a CAN receive filter for the gateway job specified by the
115  * struct can_filter described in include/linux/can.h
116  *
117  * CGW_MOD_XXX (length 17 bytes):
118  * Specifies a modification that's done to a received CAN frame before it is
119  * send out to the destination interface.
120  *
121  * <struct can_frame> data used as operator
122  * <u8> affected CAN frame elements
123  *
124  * CGW_CS_XOR (length 4 bytes):
125  * Set a simple XOR checksum starting with an initial value into
126  * data[result-idx] using data[start-idx] .. data[end-idx]
127  *
128  * The XOR checksum is calculated like this:
129  *
130  * xor = init_xor_val
131  *
132  * for (i = from_idx .. to_idx)
133  *      xor ^= can_frame.data[i]
134  *
135  * can_frame.data[ result_idx ] = xor
136  *
137  * CGW_CS_CRC8 (length 282 bytes):
138  * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table,
139  * a given initial value and a defined input data[start-idx] .. data[end-idx].
140  * Finally the result value is XOR'ed with the final_xor_val.
141  *
142  * The CRC8 checksum is calculated like this:
143  *
144  * crc = init_crc_val
145  *
146  * for (i = from_idx .. to_idx)
147  *      crc = crctab[ crc ^ can_frame.data[i] ]
148  *
149  * can_frame.data[ result_idx ] = crc ^ final_xor_val
150  *
151  * The calculated CRC may contain additional source data elements that can be
152  * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs
153  * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf
154  * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs)
155  * that are used depending on counter values inside the CAN frame data[].
156  * So far only three profiles have been implemented for illustration.
157  *
158  * Remark: In general the attribute data is a linear buffer.
159  *         Beware of sending unpacked or aligned structs!
160  */
161
162 #endif