Bluetooth: Fix race condition with L2CAP information request
[pandora-kernel.git] / include / asm-generic / gpio.h
1 #ifndef _ASM_GENERIC_GPIO_H
2 #define _ASM_GENERIC_GPIO_H
3
4 #include <linux/types.h>
5 #include <linux/errno.h>
6
7 #ifdef CONFIG_GPIOLIB
8
9 #include <linux/compiler.h>
10
11 /* Platforms may implement their GPIO interface with library code,
12  * at a small performance cost for non-inlined operations and some
13  * extra memory (for code and for per-GPIO table entries).
14  *
15  * While the GPIO programming interface defines valid GPIO numbers
16  * to be in the range 0..MAX_INT, this library restricts them to the
17  * smaller range 0..ARCH_NR_GPIOS-1.
18  */
19
20 #ifndef ARCH_NR_GPIOS
21 #define ARCH_NR_GPIOS           256
22 #endif
23
24 static inline int gpio_is_valid(int number)
25 {
26         /* only some non-negative numbers are valid */
27         return ((unsigned)number) < ARCH_NR_GPIOS;
28 }
29
30 struct seq_file;
31 struct module;
32
33 /**
34  * struct gpio_chip - abstract a GPIO controller
35  * @label: for diagnostics
36  * @dev: optional device providing the GPIOs
37  * @owner: helps prevent removal of modules exporting active GPIOs
38  * @request: optional hook for chip-specific activation, such as
39  *      enabling module power and clock; may sleep
40  * @free: optional hook for chip-specific deactivation, such as
41  *      disabling module power and clock; may sleep
42  * @direction_input: configures signal "offset" as input, or returns error
43  * @get: returns value for signal "offset"; for output signals this
44  *      returns either the value actually sensed, or zero
45  * @direction_output: configures signal "offset" as output, or returns error
46  * @set: assigns output value for signal "offset"
47  * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
48  *      implementation may not sleep
49  * @dbg_show: optional routine to show contents in debugfs; default code
50  *      will be used when this is omitted, but custom code can show extra
51  *      state (such as pullup/pulldown configuration).
52  * @base: identifies the first GPIO number handled by this chip; or, if
53  *      negative during registration, requests dynamic ID allocation.
54  * @ngpio: the number of GPIOs handled by this controller; the last GPIO
55  *      handled is (base + ngpio - 1).
56  * @can_sleep: flag must be set iff get()/set() methods sleep, as they
57  *      must while accessing GPIO expander chips over I2C or SPI
58  *
59  * A gpio_chip can help platforms abstract various sources of GPIOs so
60  * they can all be accessed through a common programing interface.
61  * Example sources would be SOC controllers, FPGAs, multifunction
62  * chips, dedicated GPIO expanders, and so on.
63  *
64  * Each chip controls a number of signals, identified in method calls
65  * by "offset" values in the range 0..(@ngpio - 1).  When those signals
66  * are referenced through calls like gpio_get_value(gpio), the offset
67  * is calculated by subtracting @base from the gpio number.
68  */
69 struct gpio_chip {
70         const char              *label;
71         struct device           *dev;
72         struct module           *owner;
73
74         int                     (*request)(struct gpio_chip *chip,
75                                                 unsigned offset);
76         void                    (*free)(struct gpio_chip *chip,
77                                                 unsigned offset);
78
79         int                     (*direction_input)(struct gpio_chip *chip,
80                                                 unsigned offset);
81         int                     (*get)(struct gpio_chip *chip,
82                                                 unsigned offset);
83         int                     (*direction_output)(struct gpio_chip *chip,
84                                                 unsigned offset, int value);
85         void                    (*set)(struct gpio_chip *chip,
86                                                 unsigned offset, int value);
87
88         int                     (*to_irq)(struct gpio_chip *chip,
89                                                 unsigned offset);
90
91         void                    (*dbg_show)(struct seq_file *s,
92                                                 struct gpio_chip *chip);
93         int                     base;
94         u16                     ngpio;
95         unsigned                can_sleep:1;
96         unsigned                exported:1;
97 };
98
99 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
100                         unsigned offset);
101 extern int __must_check gpiochip_reserve(int start, int ngpio);
102
103 /* add/remove chips */
104 extern int gpiochip_add(struct gpio_chip *chip);
105 extern int __must_check gpiochip_remove(struct gpio_chip *chip);
106
107
108 /* Always use the library code for GPIO management calls,
109  * or when sleeping may be involved.
110  */
111 extern int gpio_request(unsigned gpio, const char *label);
112 extern void gpio_free(unsigned gpio);
113
114 extern int gpio_direction_input(unsigned gpio);
115 extern int gpio_direction_output(unsigned gpio, int value);
116
117 extern int gpio_get_value_cansleep(unsigned gpio);
118 extern void gpio_set_value_cansleep(unsigned gpio, int value);
119
120
121 /* A platform's <asm/gpio.h> code may want to inline the I/O calls when
122  * the GPIO is constant and refers to some always-present controller,
123  * giving direct access to chip registers and tight bitbanging loops.
124  */
125 extern int __gpio_get_value(unsigned gpio);
126 extern void __gpio_set_value(unsigned gpio, int value);
127
128 extern int __gpio_cansleep(unsigned gpio);
129
130 extern int __gpio_to_irq(unsigned gpio);
131
132 #ifdef CONFIG_GPIO_SYSFS
133
134 /*
135  * A sysfs interface can be exported by individual drivers if they want,
136  * but more typically is configured entirely from userspace.
137  */
138 extern int gpio_export(unsigned gpio, bool direction_may_change);
139 extern void gpio_unexport(unsigned gpio);
140
141 #endif  /* CONFIG_GPIO_SYSFS */
142
143 #else   /* !CONFIG_HAVE_GPIO_LIB */
144
145 static inline int gpio_is_valid(int number)
146 {
147         /* only non-negative numbers are valid */
148         return number >= 0;
149 }
150
151 /* platforms that don't directly support access to GPIOs through I2C, SPI,
152  * or other blocking infrastructure can use these wrappers.
153  */
154
155 static inline int gpio_cansleep(unsigned gpio)
156 {
157         return 0;
158 }
159
160 static inline int gpio_get_value_cansleep(unsigned gpio)
161 {
162         might_sleep();
163         return gpio_get_value(gpio);
164 }
165
166 static inline void gpio_set_value_cansleep(unsigned gpio, int value)
167 {
168         might_sleep();
169         gpio_set_value(gpio, value);
170 }
171
172 #endif /* !CONFIG_HAVE_GPIO_LIB */
173
174 #ifndef CONFIG_GPIO_SYSFS
175
176 /* sysfs support is only available with gpiolib, where it's optional */
177
178 static inline int gpio_export(unsigned gpio, bool direction_may_change)
179 {
180         return -ENOSYS;
181 }
182
183 static inline void gpio_unexport(unsigned gpio)
184 {
185 }
186 #endif  /* CONFIG_GPIO_SYSFS */
187
188 #endif /* _ASM_GENERIC_GPIO_H */