drivers/video/bfin_adv7393fb.c

   1 /*
   2  * Frame buffer driver for ADV7393/2 video encoder
   3  *
   4  * Copyright 2006-2009 Analog Devices Inc.
   5  * Licensed under the GPL-2 or late.
   6  */
   7
   8 /*
   9  * TODO: Remove Globals
  10  * TODO: Code Cleanup
  11  */
  12
  13 #define pr_fmt(fmt) DRIVER_NAME ": " fmt
  14
  15 #include <linux/module.h>
  16 #include <linux/kernel.h>
  17 #include <linux/errno.h>
  18 #include <linux/string.h>
  19 #include <linux/mm.h>
  20 #include <linux/tty.h>
  21 #include <linux/slab.h>
  22 #include <linux/delay.h>
  23 #include <linux/fb.h>
  24 #include <linux/ioport.h>
  25 #include <linux/init.h>
  26 #include <linux/types.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/sched.h>
  29 #include <asm/blackfin.h>
  30 #include <asm/irq.h>
  31 #include <asm/dma.h>
  32 #include <linux/uaccess.h>
  33 #include <linux/gpio.h>
  34 #include <asm/portmux.h>
  35
  36 #include <linux/dma-mapping.h>
  37 #include <linux/proc_fs.h>
  38 #include <linux/platform_device.h>
  39 #include <linux/i2c.h>
  40
  41 #include "bfin_adv7393fb.h"
  42
  43 static int mode = VMODE;
  44 static int mem = VMEM;
  45 static int nocursor = 1;
  46
  47 static const unsigned short ppi_pins[] = {
  48         P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
  49         P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
  50         P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
  51         P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
  52         P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
  53         0
  54 };
  55
  56 /*
  57  * card parameters
  58  */
  59
  60 static struct bfin_adv7393_fb_par {
  61         /* structure holding blackfin / adv7393 paramters when
  62            screen is blanked */
  63         struct {
  64                 u8 Mode;        /* ntsc/pal/? */
  65         } vga_state;
  66         atomic_t ref_count;
  67 } bfin_par;
  68
  69 /* --------------------------------------------------------------------- */
  70
  71 static struct fb_var_screeninfo bfin_adv7393_fb_defined = {
  72         .xres = 720,
  73         .yres = 480,
  74         .xres_virtual = 720,
  75         .yres_virtual = 480,
  76         .bits_per_pixel = 16,
  77         .activate = FB_ACTIVATE_TEST,
  78         .height = -1,
  79         .width = -1,
  80         .left_margin = 0,
  81         .right_margin = 0,
  82         .upper_margin = 0,
  83         .lower_margin = 0,
  84         .vmode = FB_VMODE_INTERLACED,
  85         .red = {11, 5, 0},
  86         .green = {5, 6, 0},
  87         .blue = {0, 5, 0},
  88         .transp = {0, 0, 0},
  89 };
  90
  91 static struct fb_fix_screeninfo bfin_adv7393_fb_fix __devinitdata = {
  92         .id = "BFIN ADV7393",
  93         .smem_len = 720 * 480 * 2,
  94         .type = FB_TYPE_PACKED_PIXELS,
  95         .visual = FB_VISUAL_TRUECOLOR,
  96         .xpanstep = 0,
  97         .ypanstep = 0,
  98         .line_length = 720 * 2,
  99         .accel = FB_ACCEL_NONE
 100 };
 101
 102 static struct fb_ops bfin_adv7393_fb_ops = {
 103         .owner = THIS_MODULE,
 104         .fb_open = bfin_adv7393_fb_open,
 105         .fb_release = bfin_adv7393_fb_release,
 106         .fb_check_var = bfin_adv7393_fb_check_var,
 107         .fb_pan_display = bfin_adv7393_fb_pan_display,
 108         .fb_blank = bfin_adv7393_fb_blank,
 109         .fb_fillrect = cfb_fillrect,
 110         .fb_copyarea = cfb_copyarea,
 111         .fb_imageblit = cfb_imageblit,
 112         .fb_cursor = bfin_adv7393_fb_cursor,
 113         .fb_setcolreg = bfin_adv7393_fb_setcolreg,
 114 };
 115
 116 static int dma_desc_list(struct adv7393fb_device *fbdev, u16 arg)
 117 {
 118         if (arg == BUILD) {     /* Build */
 119                 fbdev->vb1 = l1_data_sram_zalloc(sizeof(struct dmasg));
 120                 if (fbdev->vb1 == NULL)
 121                         goto error;
 122
 123                 fbdev->av1 = l1_data_sram_zalloc(sizeof(struct dmasg));
 124                 if (fbdev->av1 == NULL)
 125                         goto error;
 126
 127                 fbdev->vb2 = l1_data_sram_zalloc(sizeof(struct dmasg));
 128                 if (fbdev->vb2 == NULL)
 129                         goto error;
 130
 131                 fbdev->av2 = l1_data_sram_zalloc(sizeof(struct dmasg));
 132                 if (fbdev->av2 == NULL)
 133                         goto error;
 134
 135                 /* Build linked DMA descriptor list */
 136                 fbdev->vb1->next_desc_addr = fbdev->av1;
 137                 fbdev->av1->next_desc_addr = fbdev->vb2;
 138                 fbdev->vb2->next_desc_addr = fbdev->av2;
 139                 fbdev->av2->next_desc_addr = fbdev->vb1;
 140
 141                 /* Save list head */
 142                 fbdev->descriptor_list_head = fbdev->av2;
 143
 144                 /* Vertical Blanking Field 1 */
 145                 fbdev->vb1->start_addr = VB_DUMMY_MEMORY_SOURCE;
 146                 fbdev->vb1->cfg = DMA_CFG_VAL;
 147
 148                 fbdev->vb1->x_count =
 149                     fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
 150
 151                 fbdev->vb1->x_modify = 0;
 152                 fbdev->vb1->y_count = fbdev->modes[mode].vb1_lines;
 153                 fbdev->vb1->y_modify = 0;
 154
 155                 /* Active Video Field 1 */
 156
 157                 fbdev->av1->start_addr = (unsigned long)fbdev->fb_mem;
 158                 fbdev->av1->cfg = DMA_CFG_VAL;
 159                 fbdev->av1->x_count =
 160                     fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
 161                 fbdev->av1->x_modify = fbdev->modes[mode].bpp / 8;
 162                 fbdev->av1->y_count = fbdev->modes[mode].a_lines;
 163                 fbdev->av1->y_modify =
 164                     (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank +
 165                      1) * (fbdev->modes[mode].bpp / 8);
 166
 167                 /* Vertical Blanking Field 2 */
 168
 169                 fbdev->vb2->start_addr = VB_DUMMY_MEMORY_SOURCE;
 170                 fbdev->vb2->cfg = DMA_CFG_VAL;
 171                 fbdev->vb2->x_count =
 172                     fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
 173
 174                 fbdev->vb2->x_modify = 0;
 175                 fbdev->vb2->y_count = fbdev->modes[mode].vb2_lines;
 176                 fbdev->vb2->y_modify = 0;
 177
 178                 /* Active Video Field 2 */
 179
 180                 fbdev->av2->start_addr =
 181                     (unsigned long)fbdev->fb_mem + fbdev->line_len;
 182
 183                 fbdev->av2->cfg = DMA_CFG_VAL;
 184
 185                 fbdev->av2->x_count =
 186                     fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
 187
 188                 fbdev->av2->x_modify = (fbdev->modes[mode].bpp / 8);
 189                 fbdev->av2->y_count = fbdev->modes[mode].a_lines;
 190
 191                 fbdev->av2->y_modify =
 192                     (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank +
 193                      1) * (fbdev->modes[mode].bpp / 8);
 194
 195                 return 1;
 196         }
 197
 198 error:
 199         l1_data_sram_free(fbdev->vb1);
 200         l1_data_sram_free(fbdev->av1);
 201         l1_data_sram_free(fbdev->vb2);
 202         l1_data_sram_free(fbdev->av2);
 203
 204         return 0;
 205 }
 206
 207 static int bfin_config_dma(struct adv7393fb_device *fbdev)
 208 {
 209         BUG_ON(!(fbdev->fb_mem));
 210
 211         set_dma_x_count(CH_PPI, fbdev->descriptor_list_head->x_count);
 212         set_dma_x_modify(CH_PPI, fbdev->descriptor_list_head->x_modify);
 213         set_dma_y_count(CH_PPI, fbdev->descriptor_list_head->y_count);
 214         set_dma_y_modify(CH_PPI, fbdev->descriptor_list_head->y_modify);
 215         set_dma_start_addr(CH_PPI, fbdev->descriptor_list_head->start_addr);
 216         set_dma_next_desc_addr(CH_PPI,
 217                                fbdev->descriptor_list_head->next_desc_addr);
 218         set_dma_config(CH_PPI, fbdev->descriptor_list_head->cfg);
 219
 220         return 1;
 221 }
 222
 223 static void bfin_disable_dma(void)
 224 {
 225         bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() & ~DMAEN);
 226 }
 227
 228 static void bfin_config_ppi(struct adv7393fb_device *fbdev)
 229 {
 230         if (ANOMALY_05000183) {
 231                 bfin_write_TIMER2_CONFIG(WDTH_CAP);
 232                 bfin_write_TIMER_ENABLE(TIMEN2);
 233         }
 234
 235         bfin_write_PPI_CONTROL(0x381E);
 236         bfin_write_PPI_FRAME(fbdev->modes[mode].tot_lines);
 237         bfin_write_PPI_COUNT(fbdev->modes[mode].xres +
 238                              fbdev->modes[mode].boeft_blank - 1);
 239         bfin_write_PPI_DELAY(fbdev->modes[mode].aoeft_blank - 1);
 240 }
 241
 242 static void bfin_enable_ppi(void)
 243 {
 244         bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
 245 }
 246
 247 static void bfin_disable_ppi(void)
 248 {
 249         bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
 250 }
 251
 252 static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value)
 253 {
 254         return i2c_smbus_write_byte_data(client, reg, value);
 255 }
 256
 257 static inline int adv7393_read(struct i2c_client *client, u8 reg)
 258 {
 259         return i2c_smbus_read_byte_data(client, reg);
 260 }
 261
 262 static int
 263 adv7393_write_block(struct i2c_client *client,
 264                     const u8 *data, unsigned int len)
 265 {
 266         int ret = -1;
 267         u8 reg;
 268
 269         while (len >= 2) {
 270                 reg = *data++;
 271                 ret = adv7393_write(client, reg, *data++);
 272                 if (ret < 0)
 273                         break;
 274                 len -= 2;
 275         }
 276
 277         return ret;
 278 }
 279
 280 static int adv7393_mode(struct i2c_client *client, u16 mode)
 281 {
 282         switch (mode) {
 283         case POWER_ON:          /* ADV7393 Sleep mode OFF */
 284                 adv7393_write(client, 0x00, 0x1E);
 285                 break;
 286         case POWER_DOWN:        /* ADV7393 Sleep mode ON */
 287                 adv7393_write(client, 0x00, 0x1F);
 288                 break;
 289         case BLANK_OFF:         /* Pixel Data Valid */
 290                 adv7393_write(client, 0x82, 0xCB);
 291                 break;
 292         case BLANK_ON:          /* Pixel Data Invalid */
 293                 adv7393_write(client, 0x82, 0x8B);
 294                 break;
 295         default:
 296                 return -EINVAL;
 297                 break;
 298         }
 299         return 0;
 300 }
 301
 302 static irqreturn_t ppi_irq_error(int irq, void *dev_id)
 303 {
 304
 305         struct adv7393fb_device *fbdev = (struct adv7393fb_device *)dev_id;
 306
 307         u16 status = bfin_read_PPI_STATUS();
 308
 309         pr_debug("%s: PPI Status = 0x%X\n", __func__, status);
 310
 311         if (status) {
 312                 bfin_disable_dma();     /* TODO: Check Sequence */
 313                 bfin_disable_ppi();
 314                 bfin_clear_PPI_STATUS();
 315                 bfin_config_dma(fbdev);
 316                 bfin_enable_ppi();
 317         }
 318
 319         return IRQ_HANDLED;
 320
 321 }
 322
 323 static int proc_output(char *buf)
 324 {
 325         char *p = buf;
 326
 327         p += sprintf(p,
 328                 "Usage:\n"
 329                 "echo 0x[REG][Value] > adv7393\n"
 330                 "example: echo 0x1234 >adv7393\n"
 331                 "writes 0x34 into Register 0x12\n");
 332
 333         return p - buf;
 334 }
 335
 336 static int
 337 adv7393_read_proc(char *page, char **start, off_t off,
 338                   int count, int *eof, void *data)
 339 {
 340         int len;
 341
 342         len = proc_output(page);
 343         if (len <= off + count)
 344                 *eof = 1;
 345         *start = page + off;
 346         len -= off;
 347         if (len > count)
 348                 len = count;
 349         if (len < 0)
 350                 len = 0;
 351         return len;
 352 }
 353
 354 static int
 355 adv7393_write_proc(struct file *file, const char __user * buffer,
 356                    unsigned long count, void *data)
 357 {
 358         struct adv7393fb_device *fbdev = data;
 359         char line[8];
 360         unsigned int val;
 361         int ret;
 362
 363         ret = copy_from_user(line, buffer, count);
 364         if (ret)
 365                 return -EFAULT;
 366
 367         val = simple_strtoul(line, NULL, 0);
 368         adv7393_write(fbdev->client, val >> 8, val & 0xff);
 369
 370         return count;
 371 }
 372
 373 static int __devinit bfin_adv7393_fb_probe(struct i2c_client *client,
 374                                            const struct i2c_device_id *id)
 375 {
 376         int ret = 0;
 377         struct proc_dir_entry *entry;
 378         int num_modes = ARRAY_SIZE(known_modes);
 379
 380         struct adv7393fb_device *fbdev = NULL;
 381
 382         if (mem > 2) {
 383                 dev_err(&client->dev, "mem out of allowed range [1;2]\n");
 384                 return -EINVAL;
 385         }
 386
 387         if (mode > num_modes) {
 388                 dev_err(&client->dev, "mode %d: not supported", mode);
 389                 return -EFAULT;
 390         }
 391
 392         fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
 393         if (!fbdev) {
 394                 dev_err(&client->dev, "failed to allocate device private record");
 395                 return -ENOMEM;
 396         }
 397
 398         i2c_set_clientdata(client, fbdev);
 399
 400         fbdev->modes = known_modes;
 401         fbdev->client = client;
 402
 403         fbdev->fb_len =
 404             mem * fbdev->modes[mode].xres * fbdev->modes[mode].xres *
 405             (fbdev->modes[mode].bpp / 8);
 406
 407         fbdev->line_len =
 408             fbdev->modes[mode].xres * (fbdev->modes[mode].bpp / 8);
 409
 410         /* Workaround "PPI Does Not Start Properly In Specific Mode" */
 411         if (ANOMALY_05000400) {
 412                 ret = gpio_request_one(P_IDENT(P_PPI0_FS3), GPIOF_OUT_INIT_LOW,
 413                                         "PPI0_FS3")
 414                 if (ret) {
 415                         dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n");
 416                         ret = -EBUSY;
 417                         goto out_8;
 418                 }
 419         }
 420
 421         if (peripheral_request_list(ppi_pins, DRIVER_NAME)) {
 422                 dev_err(&client->dev, "requesting PPI peripheral failed\n");
 423                 ret = -EFAULT;
 424                 goto out_8;
 425         }
 426
 427         fbdev->fb_mem =
 428             dma_alloc_coherent(NULL, fbdev->fb_len, &fbdev->dma_handle,
 429                                GFP_KERNEL);
 430
 431         if (NULL == fbdev->fb_mem) {
 432                 dev_err(&client->dev, "couldn't allocate dma buffer (%d bytes)\n",
 433                        (u32) fbdev->fb_len);
 434                 ret = -ENOMEM;
 435                 goto out_7;
 436         }
 437
 438         fbdev->info.screen_base = (void *)fbdev->fb_mem;
 439         bfin_adv7393_fb_fix.smem_start = (int)fbdev->fb_mem;
 440
 441         bfin_adv7393_fb_fix.smem_len = fbdev->fb_len;
 442         bfin_adv7393_fb_fix.line_length = fbdev->line_len;
 443
 444         if (mem > 1)
 445                 bfin_adv7393_fb_fix.ypanstep = 1;
 446
 447         bfin_adv7393_fb_defined.red.length = 5;
 448         bfin_adv7393_fb_defined.green.length = 6;
 449         bfin_adv7393_fb_defined.blue.length = 5;
 450
 451         bfin_adv7393_fb_defined.xres = fbdev->modes[mode].xres;
 452         bfin_adv7393_fb_defined.yres = fbdev->modes[mode].yres;
 453         bfin_adv7393_fb_defined.xres_virtual = fbdev->modes[mode].xres;
 454         bfin_adv7393_fb_defined.yres_virtual = mem * fbdev->modes[mode].yres;
 455         bfin_adv7393_fb_defined.bits_per_pixel = fbdev->modes[mode].bpp;
 456
 457         fbdev->info.fbops = &bfin_adv7393_fb_ops;
 458         fbdev->info.var = bfin_adv7393_fb_defined;
 459         fbdev->info.fix = bfin_adv7393_fb_fix;
 460         fbdev->info.par = &bfin_par;
 461         fbdev->info.flags = FBINFO_DEFAULT;
 462
 463         fbdev->info.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
 464         if (!fbdev->info.pseudo_palette) {
 465                 dev_err(&client->dev, "failed to allocate pseudo_palette\n");
 466                 ret = -ENOMEM;
 467                 goto out_6;
 468         }
 469
 470         if (fb_alloc_cmap(&fbdev->info.cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
 471                 dev_err(&client->dev, "failed to allocate colormap (%d entries)\n",
 472                            BFIN_LCD_NBR_PALETTE_ENTRIES);
 473                 ret = -EFAULT;
 474                 goto out_5;
 475         }
 476
 477         if (request_dma(CH_PPI, "BF5xx_PPI_DMA") < 0) {
 478                 dev_err(&client->dev, "unable to request PPI DMA\n");
 479                 ret = -EFAULT;
 480                 goto out_4;
 481         }
 482
 483         if (request_irq(IRQ_PPI_ERROR, ppi_irq_error, 0,
 484                         "PPI ERROR", fbdev) < 0) {
 485                 dev_err(&client->dev, "unable to request PPI ERROR IRQ\n");
 486                 ret = -EFAULT;
 487                 goto out_3;
 488         }
 489
 490         fbdev->open = 0;
 491
 492         ret = adv7393_write_block(client, fbdev->modes[mode].adv7393_i2c_initd,
 493                                 fbdev->modes[mode].adv7393_i2c_initd_len);
 494
 495         if (ret) {
 496                 dev_err(&client->dev, "i2c attach: init error\n");
 497                 goto out_1;
 498         }
 499
 500
 501         if (register_framebuffer(&fbdev->info) < 0) {
 502                 dev_err(&client->dev, "unable to register framebuffer\n");
 503                 ret = -EFAULT;
 504                 goto out_1;
 505         }
 506
 507         dev_info(&client->dev, "fb%d: %s frame buffer device\n",
 508                fbdev->info.node, fbdev->info.fix.id);
 509         dev_info(&client->dev, "fb memory address : 0x%p\n", fbdev->fb_mem);
 510
 511         entry = create_proc_entry("driver/adv7393", 0, NULL);
 512         if (!entry) {
 513                 dev_err(&client->dev, "unable to create /proc entry\n");
 514                 ret = -EFAULT;
 515                 goto out_0;
 516         }
 517
 518         entry->read_proc = adv7393_read_proc;
 519         entry->write_proc = adv7393_write_proc;
 520         entry->data = fbdev;
 521
 522         return 0;
 523
 524  out_0:
 525         unregister_framebuffer(&fbdev->info);
 526  out_1:
 527         free_irq(IRQ_PPI_ERROR, fbdev);
 528  out_3:
 529         free_dma(CH_PPI);
 530  out_4:
 531         dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem,
 532                           fbdev->dma_handle);
 533  out_5:
 534         fb_dealloc_cmap(&fbdev->info.cmap);
 535  out_6:
 536         kfree(fbdev->info.pseudo_palette);
 537  out_7:
 538         peripheral_free_list(ppi_pins);
 539  out_8:
 540         kfree(fbdev);
 541
 542         return ret;
 543 }
 544
 545 static int bfin_adv7393_fb_open(struct fb_info *info, int user)
 546 {
 547         struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
 548
 549         fbdev->info.screen_base = (void *)fbdev->fb_mem;
 550         if (!fbdev->info.screen_base) {
 551                 dev_err(&fbdev->client->dev, "unable to map device\n");
 552                 return -ENOMEM;
 553         }
 554
 555         fbdev->open = 1;
 556         dma_desc_list(fbdev, BUILD);
 557         adv7393_mode(fbdev->client, BLANK_OFF);
 558         bfin_config_ppi(fbdev);
 559         bfin_config_dma(fbdev);
 560         bfin_enable_ppi();
 561
 562         return 0;
 563 }
 564
 565 static int bfin_adv7393_fb_release(struct fb_info *info, int user)
 566 {
 567         struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
 568
 569         adv7393_mode(fbdev->client, BLANK_ON);
 570         bfin_disable_dma();
 571         bfin_disable_ppi();
 572         dma_desc_list(fbdev, DESTRUCT);
 573         fbdev->open = 0;
 574         return 0;
 575 }
 576
 577 static int
 578 bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 579 {
 580
 581         switch (var->bits_per_pixel) {
 582         case 16:/* DIRECTCOLOUR, 64k */
 583                 var->red.offset = info->var.red.offset;
 584                 var->green.offset = info->var.green.offset;
 585                 var->blue.offset = info->var.blue.offset;
 586                 var->red.length = info->var.red.length;
 587                 var->green.length = info->var.green.length;
 588                 var->blue.length = info->var.blue.length;
 589                 var->transp.offset = 0;
 590                 var->transp.length = 0;
 591                 var->transp.msb_right = 0;
 592                 var->red.msb_right = 0;
 593                 var->green.msb_right = 0;
 594                 var->blue.msb_right = 0;
 595                 break;
 596         default:
 597                 pr_debug("%s: depth not supported: %u BPP\n", __func__,
 598                          var->bits_per_pixel);
 599                 return -EINVAL;
 600         }
 601
 602         if (info->var.xres != var->xres ||
 603             info->var.yres != var->yres ||
 604             info->var.xres_virtual != var->xres_virtual ||
 605             info->var.yres_virtual != var->yres_virtual) {
 606                 pr_debug("%s: Resolution not supported: X%u x Y%u\n",
 607                          __func__, var->xres, var->yres);
 608                 return -EINVAL;
 609         }
 610
 611         /*
 612          *  Memory limit
 613          */
 614
 615         if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
 616                 pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
 617                          __func__, var->yres_virtual);
 618                 return -ENOMEM;
 619         }
 620
 621         return 0;
 622 }
 623
 624 static int
 625 bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 626 {
 627         int dy;
 628         u32 dmaaddr;
 629         struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
 630
 631         if (!var || !info)
 632                 return -EINVAL;
 633
 634         if (var->xoffset - info->var.xoffset) {
 635                 /* No support for X panning for now! */
 636                 return -EINVAL;
 637         }
 638         dy = var->yoffset - info->var.yoffset;
 639
 640         if (dy) {
 641                 pr_debug("%s: Panning screen of %d lines\n", __func__, dy);
 642
 643                 dmaaddr = fbdev->av1->start_addr;
 644                 dmaaddr += (info->fix.line_length * dy);
 645                 /* TODO: Wait for current frame to finished */
 646
 647                 fbdev->av1->start_addr = (unsigned long)dmaaddr;
 648                 fbdev->av2->start_addr = (unsigned long)dmaaddr + fbdev->line_len;
 649         }
 650
 651         return 0;
 652
 653 }
 654
 655 /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
 656 static int bfin_adv7393_fb_blank(int blank, struct fb_info *info)
 657 {
 658         struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
 659
 660         switch (blank) {
 661
 662         case VESA_NO_BLANKING:
 663                 /* Turn on panel */
 664                 adv7393_mode(fbdev->client, BLANK_OFF);
 665                 break;
 666
 667         case VESA_VSYNC_SUSPEND:
 668         case VESA_HSYNC_SUSPEND:
 669         case VESA_POWERDOWN:
 670                 /* Turn off panel */
 671                 adv7393_mode(fbdev->client, BLANK_ON);
 672                 break;
 673
 674         default:
 675                 return -EINVAL;
 676                 break;
 677         }
 678         return 0;
 679 }
 680
 681 int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 682 {
 683         if (nocursor)
 684                 return 0;
 685         else
 686                 return -EINVAL; /* just to force soft_cursor() call */
 687 }
 688
 689 static int bfin_adv7393_fb_setcolreg(u_int regno, u_int red, u_int green,
 690                                      u_int blue, u_int transp,
 691                                      struct fb_info *info)
 692 {
 693         if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
 694                 return -EINVAL;
 695
 696         if (info->var.grayscale)
 697                 /* grayscale = 0.30*R + 0.59*G + 0.11*B */
 698                 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
 699
 700         if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
 701                 u32 value;
 702                 /* Place color in the pseudopalette */
 703                 if (regno > 16)
 704                         return -EINVAL;
 705
 706                 red   >>= (16 - info->var.red.length);
 707                 green >>= (16 - info->var.green.length);
 708                 blue  >>= (16 - info->var.blue.length);
 709
 710                 value = (red   << info->var.red.offset) |
 711                         (green << info->var.green.offset)|
 712                         (blue  << info->var.blue.offset);
 713                 value &= 0xFFFF;
 714
 715                 ((u32 *) (info->pseudo_palette))[regno] = value;
 716         }
 717
 718         return 0;
 719 }
 720
 721 static int __devexit bfin_adv7393_fb_remove(struct i2c_client *client)
 722 {
 723         struct adv7393fb_device *fbdev = i2c_get_clientdata(client);
 724
 725         adv7393_mode(client, POWER_DOWN);
 726
 727         if (fbdev->fb_mem)
 728                 dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem, fbdev->dma_handle);
 729         free_dma(CH_PPI);
 730         free_irq(IRQ_PPI_ERROR, fbdev);
 731         unregister_framebuffer(&fbdev->info);
 732         remove_proc_entry("driver/adv7393", NULL);
 733         fb_dealloc_cmap(&fbdev->info.cmap);
 734         kfree(fbdev->info.pseudo_palette);
 735
 736         if (ANOMALY_05000400)
 737                 gpio_free(P_IDENT(P_PPI0_FS3)); /* FS3 */
 738         peripheral_free_list(ppi_pins);
 739         kfree(fbdev);
 740
 741         return 0;
 742 }
 743
 744 #ifdef CONFIG_PM
 745 static int bfin_adv7393_fb_suspend(struct device *dev)
 746 {
 747         struct adv7393fb_device *fbdev = dev_get_drvdata(dev);
 748
 749         if (fbdev->open) {
 750                 bfin_disable_dma();
 751                 bfin_disable_ppi();
 752                 dma_desc_list(fbdev, DESTRUCT);
 753         }
 754         adv7393_mode(fbdev->client, POWER_DOWN);
 755
 756         return 0;
 757 }
 758
 759 static int bfin_adv7393_fb_resume(struct device *dev)
 760 {
 761         struct adv7393fb_device *fbdev = dev_get_drvdata(dev);
 762
 763         adv7393_mode(fbdev->client, POWER_ON);
 764
 765         if (fbdev->open) {
 766                 dma_desc_list(fbdev, BUILD);
 767                 bfin_config_ppi(fbdev);
 768                 bfin_config_dma(fbdev);
 769                 bfin_enable_ppi();
 770         }
 771
 772         return 0;
 773 }
 774
 775 static const struct dev_pm_ops bfin_adv7393_dev_pm_ops = {
 776         .suspend = bfin_adv7393_fb_suspend,
 777         .resume  = bfin_adv7393_fb_resume,
 778 };
 779 #endif
 780
 781 static const struct i2c_device_id bfin_adv7393_id[] = {
 782         {DRIVER_NAME, 0},
 783         {}
 784 };
 785
 786 MODULE_DEVICE_TABLE(i2c, bfin_adv7393_id);
 787
 788 static struct i2c_driver bfin_adv7393_fb_driver = {
 789         .driver = {
 790                 .name = DRIVER_NAME,
 791 #ifdef CONFIG_PM
 792                 .pm   = &bfin_adv7393_dev_pm_ops,
 793 #endif
 794         },
 795         .probe = bfin_adv7393_fb_probe,
 796         .remove = __devexit_p(bfin_adv7393_fb_remove),
 797         .id_table = bfin_adv7393_id,
 798 };
 799
 800 static int __init bfin_adv7393_fb_driver_init(void)
 801 {
 802 #if  defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 803         request_module("i2c-bfin-twi");
 804 #else
 805         request_module("i2c-gpio");
 806 #endif
 807
 808         return i2c_add_driver(&bfin_adv7393_fb_driver);
 809 }
 810 module_init(bfin_adv7393_fb_driver_init);
 811
 812 static void __exit bfin_adv7393_fb_driver_cleanup(void)
 813 {
 814         i2c_del_driver(&bfin_adv7393_fb_driver);
 815 }
 816 module_exit(bfin_adv7393_fb_driver_cleanup);
 817
 818 MODULE_LICENSE("GPL");
 819 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 820 MODULE_DESCRIPTION("Frame buffer driver for ADV7393/2 Video Encoder");
 821
 822 module_param(mode, int, 0);
 823 MODULE_PARM_DESC(mode,
 824         "Video Mode (0=NTSC,1=PAL,2=NTSC 640x480,3=PAL 640x480,4=NTSC YCbCr input,5=PAL YCbCr input)");
 825
 826 module_param(mem, int, 0);
 827 MODULE_PARM_DESC(mem,
 828         "Size of frame buffer memory 1=Single 2=Double Size (allows y-panning / frame stacking)");
 829
 830 module_param(nocursor, int, 0644);
 831 MODULE_PARM_DESC(nocursor, "cursor enable/disable");