drivers/video/atmel_lcdfb.c

   1 /*
   2  *  Driver for AT91/AT32 LCD Controller
   3  *
   4  *  Copyright (C) 2007 Atmel Corporation
   5  *
   6  * This file is subject to the terms and conditions of the GNU General Public
   7  * License.  See the file COPYING in the main directory of this archive for
   8  * more details.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/clk.h>
  16 #include <linux/fb.h>
  17 #include <linux/init.h>
  18 #include <linux/delay.h>
  19 #include <linux/backlight.h>
  20
  21 #include <mach/board.h>
  22 #include <mach/cpu.h>
  23 #include <mach/gpio.h>
  24
  25 #include <video/atmel_lcdc.h>
  26
  27 #define lcdc_readl(sinfo, reg)          __raw_readl((sinfo)->mmio+(reg))
  28 #define lcdc_writel(sinfo, reg, val)    __raw_writel((val), (sinfo)->mmio+(reg))
  29
  30 /* configurable parameters */
  31 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
  32 #define ATMEL_LCDC_DMA_BURST_LEN        8
  33
  34 #if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
  35         defined(CONFIG_ARCH_AT91SAM9RL)
  36 #define ATMEL_LCDC_FIFO_SIZE            2048
  37 #else
  38 #define ATMEL_LCDC_FIFO_SIZE            512
  39 #endif
  40
  41 #if defined(CONFIG_ARCH_AT91)
  42 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  43                                          | FBINFO_PARTIAL_PAN_OK \
  44                                          | FBINFO_HWACCEL_YPAN)
  45
  46 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  47                                         struct fb_var_screeninfo *var)
  48 {
  49
  50 }
  51 #elif defined(CONFIG_AVR32)
  52 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  53                                         | FBINFO_PARTIAL_PAN_OK \
  54                                         | FBINFO_HWACCEL_XPAN \
  55                                         | FBINFO_HWACCEL_YPAN)
  56
  57 static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  58                                      struct fb_var_screeninfo *var)
  59 {
  60         u32 dma2dcfg;
  61         u32 pixeloff;
  62
  63         pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
  64
  65         dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
  66         dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
  67         lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
  68
  69         /* Update configuration */
  70         lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
  71                     lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
  72                     | ATMEL_LCDC_DMAUPDT);
  73 }
  74 #endif
  75
  76 static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
  77                 | ATMEL_LCDC_POL_POSITIVE
  78                 | ATMEL_LCDC_ENA_PWMENABLE;
  79
  80 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
  81
  82 /* some bl->props field just changed */
  83 static int atmel_bl_update_status(struct backlight_device *bl)
  84 {
  85         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
  86         int                     power = sinfo->bl_power;
  87         int                     brightness = bl->props.brightness;
  88
  89         /* REVISIT there may be a meaningful difference between
  90          * fb_blank and power ... there seem to be some cases
  91          * this doesn't handle correctly.
  92          */
  93         if (bl->props.fb_blank != sinfo->bl_power)
  94                 power = bl->props.fb_blank;
  95         else if (bl->props.power != sinfo->bl_power)
  96                 power = bl->props.power;
  97
  98         if (brightness < 0 && power == FB_BLANK_UNBLANK)
  99                 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 100         else if (power != FB_BLANK_UNBLANK)
 101                 brightness = 0;
 102
 103         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
 104         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
 105                         brightness ? contrast_ctr : 0);
 106
 107         bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
 108
 109         return 0;
 110 }
 111
 112 static int atmel_bl_get_brightness(struct backlight_device *bl)
 113 {
 114         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
 115
 116         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 117 }
 118
 119 static struct backlight_ops atmel_lcdc_bl_ops = {
 120         .update_status = atmel_bl_update_status,
 121         .get_brightness = atmel_bl_get_brightness,
 122 };
 123
 124 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 125 {
 126         struct backlight_device *bl;
 127
 128         sinfo->bl_power = FB_BLANK_UNBLANK;
 129
 130         if (sinfo->backlight)
 131                 return;
 132
 133         bl = backlight_device_register("backlight", &sinfo->pdev->dev,
 134                         sinfo, &atmel_lcdc_bl_ops);
 135         if (IS_ERR(sinfo->backlight)) {
 136                 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
 137                                 PTR_ERR(bl));
 138                 return;
 139         }
 140         sinfo->backlight = bl;
 141
 142         bl->props.power = FB_BLANK_UNBLANK;
 143         bl->props.fb_blank = FB_BLANK_UNBLANK;
 144         bl->props.max_brightness = 0xff;
 145         bl->props.brightness = atmel_bl_get_brightness(bl);
 146 }
 147
 148 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 149 {
 150         if (sinfo->backlight)
 151                 backlight_device_unregister(sinfo->backlight);
 152 }
 153
 154 #else
 155
 156 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 157 {
 158         dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
 159 }
 160
 161 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 162 {
 163 }
 164
 165 #endif
 166
 167 static void init_contrast(struct atmel_lcdfb_info *sinfo)
 168 {
 169         /* have some default contrast/backlight settings */
 170         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
 171         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 172
 173         if (sinfo->lcdcon_is_backlight)
 174                 init_backlight(sinfo);
 175 }
 176
 177
 178 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 179         .type           = FB_TYPE_PACKED_PIXELS,
 180         .visual         = FB_VISUAL_TRUECOLOR,
 181         .xpanstep       = 0,
 182         .ypanstep       = 1,
 183         .ywrapstep      = 0,
 184         .accel          = FB_ACCEL_NONE,
 185 };
 186
 187 static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 188 {
 189         unsigned long value;
 190
 191         if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
 192                 return xres;
 193
 194         value = xres;
 195         if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
 196                 /* STN display */
 197                 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
 198                         value *= 3;
 199                 }
 200                 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
 201                    || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
 202                       && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
 203                         value = DIV_ROUND_UP(value, 4);
 204                 else
 205                         value = DIV_ROUND_UP(value, 8);
 206         }
 207
 208         return value;
 209 }
 210
 211 static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
 212 {
 213         /* Turn off the LCD controller and the DMA controller */
 214         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 215                         sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
 216
 217         /* Wait for the LCDC core to become idle */
 218         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
 219                 msleep(10);
 220
 221         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
 222 }
 223
 224 static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
 225 {
 226         atmel_lcdfb_stop_nowait(sinfo);
 227
 228         /* Wait for DMA engine to become idle... */
 229         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 230                 msleep(10);
 231 }
 232
 233 static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
 234 {
 235         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
 236         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 237                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
 238                 | ATMEL_LCDC_PWR);
 239 }
 240
 241 static void atmel_lcdfb_update_dma(struct fb_info *info,
 242                                struct fb_var_screeninfo *var)
 243 {
 244         struct atmel_lcdfb_info *sinfo = info->par;
 245         struct fb_fix_screeninfo *fix = &info->fix;
 246         unsigned long dma_addr;
 247
 248         dma_addr = (fix->smem_start + var->yoffset * fix->line_length
 249                     + var->xoffset * var->bits_per_pixel / 8);
 250
 251         dma_addr &= ~3UL;
 252
 253         /* Set framebuffer DMA base address and pixel offset */
 254         lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
 255
 256         atmel_lcdfb_update_dma2d(sinfo, var);
 257 }
 258
 259 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
 260 {
 261         struct fb_info *info = sinfo->info;
 262
 263         dma_free_writecombine(info->device, info->fix.smem_len,
 264                                 info->screen_base, info->fix.smem_start);
 265 }
 266
 267 /**
 268  *      atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
 269  *      @sinfo: the frame buffer to allocate memory for
 270  */
 271 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 272 {
 273         struct fb_info *info = sinfo->info;
 274         struct fb_var_screeninfo *var = &info->var;
 275         unsigned int smem_len;
 276
 277         smem_len = (var->xres_virtual * var->yres_virtual
 278                     * ((var->bits_per_pixel + 7) / 8));
 279         info->fix.smem_len = max(smem_len, sinfo->smem_len);
 280
 281         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 282                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
 283
 284         if (!info->screen_base) {
 285                 return -ENOMEM;
 286         }
 287
 288         memset(info->screen_base, 0, info->fix.smem_len);
 289
 290         return 0;
 291 }
 292
 293 static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
 294                                                      struct fb_info *info)
 295 {
 296         struct fb_videomode varfbmode;
 297         const struct fb_videomode *fbmode = NULL;
 298
 299         fb_var_to_videomode(&varfbmode, var);
 300         fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
 301         if (fbmode)
 302                 fb_videomode_to_var(var, fbmode);
 303         return fbmode;
 304 }
 305
 306
 307 /**
 308  *      atmel_lcdfb_check_var - Validates a var passed in.
 309  *      @var: frame buffer variable screen structure
 310  *      @info: frame buffer structure that represents a single frame buffer
 311  *
 312  *      Checks to see if the hardware supports the state requested by
 313  *      var passed in. This function does not alter the hardware
 314  *      state!!!  This means the data stored in struct fb_info and
 315  *      struct atmel_lcdfb_info do not change. This includes the var
 316  *      inside of struct fb_info.  Do NOT change these. This function
 317  *      can be called on its own if we intent to only test a mode and
 318  *      not actually set it. The stuff in modedb.c is a example of
 319  *      this. If the var passed in is slightly off by what the
 320  *      hardware can support then we alter the var PASSED in to what
 321  *      we can do. If the hardware doesn't support mode change a
 322  *      -EINVAL will be returned by the upper layers. You don't need
 323  *      to implement this function then. If you hardware doesn't
 324  *      support changing the resolution then this function is not
 325  *      needed. In this case the driver would just provide a var that
 326  *      represents the static state the screen is in.
 327  *
 328  *      Returns negative errno on error, or zero on success.
 329  */
 330 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 331                              struct fb_info *info)
 332 {
 333         struct device *dev = info->device;
 334         struct atmel_lcdfb_info *sinfo = info->par;
 335         unsigned long clk_value_khz;
 336
 337         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 338
 339         dev_dbg(dev, "%s:\n", __func__);
 340
 341         if (!(var->pixclock && var->bits_per_pixel)) {
 342                 /* choose a suitable mode if possible */
 343                 if (!atmel_lcdfb_choose_mode(var, info)) {
 344                         dev_err(dev, "needed value not specified\n");
 345                         return -EINVAL;
 346                 }
 347         }
 348
 349         dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
 350         dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
 351         dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
 352         dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
 353
 354         if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
 355                 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
 356                 return -EINVAL;
 357         }
 358
 359         /* Do not allow to have real resoulution larger than virtual */
 360         if (var->xres > var->xres_virtual)
 361                 var->xres_virtual = var->xres;
 362
 363         if (var->yres > var->yres_virtual)
 364                 var->yres_virtual = var->yres;
 365
 366         /* Force same alignment for each line */
 367         var->xres = (var->xres + 3) & ~3UL;
 368         var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
 369
 370         var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
 371         var->transp.msb_right = 0;
 372         var->transp.offset = var->transp.length = 0;
 373         var->xoffset = var->yoffset = 0;
 374
 375         /* Saturate vertical and horizontal timings at maximum values */
 376         var->vsync_len = min_t(u32, var->vsync_len,
 377                         (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
 378         var->upper_margin = min_t(u32, var->upper_margin,
 379                         ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
 380         var->lower_margin = min_t(u32, var->lower_margin,
 381                         ATMEL_LCDC_VFP);
 382         var->right_margin = min_t(u32, var->right_margin,
 383                         (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
 384         var->hsync_len = min_t(u32, var->hsync_len,
 385                         (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
 386         var->left_margin = min_t(u32, var->left_margin,
 387                         ATMEL_LCDC_HBP + 1);
 388
 389         /* Some parameters can't be zero */
 390         var->vsync_len = max_t(u32, var->vsync_len, 1);
 391         var->right_margin = max_t(u32, var->right_margin, 1);
 392         var->hsync_len = max_t(u32, var->hsync_len, 1);
 393         var->left_margin = max_t(u32, var->left_margin, 1);
 394
 395         switch (var->bits_per_pixel) {
 396         case 1:
 397         case 2:
 398         case 4:
 399         case 8:
 400                 var->red.offset = var->green.offset = var->blue.offset = 0;
 401                 var->red.length = var->green.length = var->blue.length
 402                         = var->bits_per_pixel;
 403                 break;
 404         case 15:
 405         case 16:
 406                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 407                         /* RGB:565 mode */
 408                         var->red.offset = 11;
 409                         var->blue.offset = 0;
 410                         var->green.length = 6;
 411                 } else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) {
 412                         var->red.offset = 10;
 413                         var->blue.offset = 0;
 414                         var->green.length = 5;
 415                 } else {
 416                         /* BGR:555 mode */
 417                         var->red.offset = 0;
 418                         var->blue.offset = 10;
 419                         var->green.length = 5;
 420                 }
 421                 var->green.offset = 5;
 422                 var->red.length = var->blue.length = 5;
 423                 break;
 424         case 32:
 425                 var->transp.offset = 24;
 426                 var->transp.length = 8;
 427                 /* fall through */
 428         case 24:
 429                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 430                         /* RGB:888 mode */
 431                         var->red.offset = 16;
 432                         var->blue.offset = 0;
 433                 } else {
 434                         /* BGR:888 mode */
 435                         var->red.offset = 0;
 436                         var->blue.offset = 16;
 437                 }
 438                 var->green.offset = 8;
 439                 var->red.length = var->green.length = var->blue.length = 8;
 440                 break;
 441         default:
 442                 dev_err(dev, "color depth %d not supported\n",
 443                                         var->bits_per_pixel);
 444                 return -EINVAL;
 445         }
 446
 447         return 0;
 448 }
 449
 450 /*
 451  * LCD reset sequence
 452  */
 453 static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 454 {
 455         might_sleep();
 456
 457         atmel_lcdfb_stop(sinfo);
 458         atmel_lcdfb_start(sinfo);
 459 }
 460
 461 /**
 462  *      atmel_lcdfb_set_par - Alters the hardware state.
 463  *      @info: frame buffer structure that represents a single frame buffer
 464  *
 465  *      Using the fb_var_screeninfo in fb_info we set the resolution
 466  *      of the this particular framebuffer. This function alters the
 467  *      par AND the fb_fix_screeninfo stored in fb_info. It doesn't
 468  *      not alter var in fb_info since we are using that data. This
 469  *      means we depend on the data in var inside fb_info to be
 470  *      supported by the hardware.  atmel_lcdfb_check_var is always called
 471  *      before atmel_lcdfb_set_par to ensure this.  Again if you can't
 472  *      change the resolution you don't need this function.
 473  *
 474  */
 475 static int atmel_lcdfb_set_par(struct fb_info *info)
 476 {
 477         struct atmel_lcdfb_info *sinfo = info->par;
 478         unsigned long hozval_linesz;
 479         unsigned long value;
 480         unsigned long clk_value_khz;
 481         unsigned long bits_per_line;
 482
 483         might_sleep();
 484
 485         dev_dbg(info->device, "%s:\n", __func__);
 486         dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
 487                  info->var.xres, info->var.yres,
 488                  info->var.xres_virtual, info->var.yres_virtual);
 489
 490         atmel_lcdfb_stop_nowait(sinfo);
 491
 492         if (info->var.bits_per_pixel == 1)
 493                 info->fix.visual = FB_VISUAL_MONO01;
 494         else if (info->var.bits_per_pixel <= 8)
 495                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 496         else
 497                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 498
 499         bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
 500         info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
 501
 502         /* Re-initialize the DMA engine... */
 503         dev_dbg(info->device, "  * update DMA engine\n");
 504         atmel_lcdfb_update_dma(info, &info->var);
 505
 506         /* ...set frame size and burst length = 8 words (?) */
 507         value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
 508         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
 509         lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
 510
 511         /* Now, the LCDC core... */
 512
 513         /* Set pixel clock */
 514         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 515
 516         value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
 517
 518         if (value < 2) {
 519                 dev_notice(info->device, "Bypassing pixel clock divider\n");
 520                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
 521         } else {
 522                 value = (value / 2) - 1;
 523                 dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n",
 524                                 value);
 525                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
 526                                 value << ATMEL_LCDC_CLKVAL_OFFSET);
 527                 info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
 528                 dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
 529                                         PICOS2KHZ(info->var.pixclock));
 530         }
 531
 532
 533         /* Initialize control register 2 */
 534         value = sinfo->default_lcdcon2;
 535
 536         if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 537                 value |= ATMEL_LCDC_INVLINE_INVERTED;
 538         if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 539                 value |= ATMEL_LCDC_INVFRAME_INVERTED;
 540
 541         switch (info->var.bits_per_pixel) {
 542                 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
 543                 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
 544                 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
 545                 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
 546                 case 15: /* fall through */
 547                 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
 548                 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
 549                 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
 550                 default: BUG(); break;
 551         }
 552         dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
 553         lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
 554
 555         /* Vertical timing */
 556         value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
 557         value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
 558         value |= info->var.lower_margin;
 559         dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
 560         lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
 561
 562         /* Horizontal timing */
 563         value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 564         value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 565         value |= (info->var.left_margin - 1);
 566         dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
 567         lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
 568
 569         /* Horizontal value (aka line size) */
 570         hozval_linesz = compute_hozval(info->var.xres,
 571                                         lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
 572
 573         /* Display size */
 574         value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
 575         value |= info->var.yres - 1;
 576         dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
 577         lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
 578
 579         /* FIFO Threshold: Use formula from data sheet */
 580         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
 581         lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
 582
 583         /* Toggle LCD_MODE every frame */
 584         lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
 585
 586         /* Disable all interrupts */
 587         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
 588         /* Enable FIFO & DMA errors */
 589         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
 590
 591         /* ...wait for DMA engine to become idle... */
 592         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 593                 msleep(10);
 594
 595         atmel_lcdfb_start(sinfo);
 596
 597         dev_dbg(info->device, "  * DONE\n");
 598
 599         return 0;
 600 }
 601
 602 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
 603 {
 604         chan &= 0xffff;
 605         chan >>= 16 - bf->length;
 606         return chan << bf->offset;
 607 }
 608
 609 /**
 610  *      atmel_lcdfb_setcolreg - Optional function. Sets a color register.
 611  *      @regno: Which register in the CLUT we are programming
 612  *      @red: The red value which can be up to 16 bits wide
 613  *      @green: The green value which can be up to 16 bits wide
 614  *      @blue:  The blue value which can be up to 16 bits wide.
 615  *      @transp: If supported the alpha value which can be up to 16 bits wide.
 616  *      @info: frame buffer info structure
 617  *
 618  *      Set a single color register. The values supplied have a 16 bit
 619  *      magnitude which needs to be scaled in this function for the hardware.
 620  *      Things to take into consideration are how many color registers, if
 621  *      any, are supported with the current color visual. With truecolor mode
 622  *      no color palettes are supported. Here a psuedo palette is created
 623  *      which we store the value in pseudo_palette in struct fb_info. For
 624  *      pseudocolor mode we have a limited color palette. To deal with this
 625  *      we can program what color is displayed for a particular pixel value.
 626  *      DirectColor is similar in that we can program each color field. If
 627  *      we have a static colormap we don't need to implement this function.
 628  *
 629  *      Returns negative errno on error, or zero on success. In an
 630  *      ideal world, this would have been the case, but as it turns
 631  *      out, the other drivers return 1 on failure, so that's what
 632  *      we're going to do.
 633  */
 634 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 635                              unsigned int green, unsigned int blue,
 636                              unsigned int transp, struct fb_info *info)
 637 {
 638         struct atmel_lcdfb_info *sinfo = info->par;
 639         unsigned int val;
 640         u32 *pal;
 641         int ret = 1;
 642
 643         if (info->var.grayscale)
 644                 red = green = blue = (19595 * red + 38470 * green
 645                                       + 7471 * blue) >> 16;
 646
 647         switch (info->fix.visual) {
 648         case FB_VISUAL_TRUECOLOR:
 649                 if (regno < 16) {
 650                         pal = info->pseudo_palette;
 651
 652                         val  = chan_to_field(red, &info->var.red);
 653                         val |= chan_to_field(green, &info->var.green);
 654                         val |= chan_to_field(blue, &info->var.blue);
 655
 656                         pal[regno] = val;
 657                         ret = 0;
 658                 }
 659                 break;
 660
 661         case FB_VISUAL_PSEUDOCOLOR:
 662                 if (regno < 256) {
 663                         val  = ((red   >> 11) & 0x001f);
 664                         val |= ((green >>  6) & 0x03e0);
 665                         val |= ((blue  >>  1) & 0x7c00);
 666
 667                         /*
 668                          * TODO: intensity bit. Maybe something like
 669                          *   ~(red[10] ^ green[10] ^ blue[10]) & 1
 670                          */
 671
 672                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 673                         ret = 0;
 674                 }
 675                 break;
 676
 677         case FB_VISUAL_MONO01:
 678                 if (regno < 2) {
 679                         val = (regno == 0) ? 0x00 : 0x1F;
 680                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 681                         ret = 0;
 682                 }
 683                 break;
 684
 685         }
 686
 687         return ret;
 688 }
 689
 690 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
 691                                struct fb_info *info)
 692 {
 693         dev_dbg(info->device, "%s\n", __func__);
 694
 695         atmel_lcdfb_update_dma(info, var);
 696
 697         return 0;
 698 }
 699
 700 static struct fb_ops atmel_lcdfb_ops = {
 701         .owner          = THIS_MODULE,
 702         .fb_check_var   = atmel_lcdfb_check_var,
 703         .fb_set_par     = atmel_lcdfb_set_par,
 704         .fb_setcolreg   = atmel_lcdfb_setcolreg,
 705         .fb_pan_display = atmel_lcdfb_pan_display,
 706         .fb_fillrect    = cfb_fillrect,
 707         .fb_copyarea    = cfb_copyarea,
 708         .fb_imageblit   = cfb_imageblit,
 709 };
 710
 711 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
 712 {
 713         struct fb_info *info = dev_id;
 714         struct atmel_lcdfb_info *sinfo = info->par;
 715         u32 status;
 716
 717         status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
 718         if (status & ATMEL_LCDC_UFLWI) {
 719                 dev_warn(info->device, "FIFO underflow %#x\n", status);
 720                 /* reset DMA and FIFO to avoid screen shifting */
 721                 schedule_work(&sinfo->task);
 722         }
 723         lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
 724         return IRQ_HANDLED;
 725 }
 726
 727 /*
 728  * LCD controller task (to reset the LCD)
 729  */
 730 static void atmel_lcdfb_task(struct work_struct *work)
 731 {
 732         struct atmel_lcdfb_info *sinfo =
 733                 container_of(work, struct atmel_lcdfb_info, task);
 734
 735         atmel_lcdfb_reset(sinfo);
 736 }
 737
 738 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
 739 {
 740         struct fb_info *info = sinfo->info;
 741         int ret = 0;
 742
 743         info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
 744
 745         dev_info(info->device,
 746                "%luKiB frame buffer at %08lx (mapped at %p)\n",
 747                (unsigned long)info->fix.smem_len / 1024,
 748                (unsigned long)info->fix.smem_start,
 749                info->screen_base);
 750
 751         /* Allocate colormap */
 752         ret = fb_alloc_cmap(&info->cmap, 256, 0);
 753         if (ret < 0)
 754                 dev_err(info->device, "Alloc color map failed\n");
 755
 756         return ret;
 757 }
 758
 759 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
 760 {
 761         if (sinfo->bus_clk)
 762                 clk_enable(sinfo->bus_clk);
 763         clk_enable(sinfo->lcdc_clk);
 764 }
 765
 766 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
 767 {
 768         if (sinfo->bus_clk)
 769                 clk_disable(sinfo->bus_clk);
 770         clk_disable(sinfo->lcdc_clk);
 771 }
 772
 773
 774 static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 775 {
 776         struct device *dev = &pdev->dev;
 777         struct fb_info *info;
 778         struct atmel_lcdfb_info *sinfo;
 779         struct atmel_lcdfb_info *pdata_sinfo;
 780         struct fb_videomode fbmode;
 781         struct resource *regs = NULL;
 782         struct resource *map = NULL;
 783         int ret;
 784
 785         dev_dbg(dev, "%s BEGIN\n", __func__);
 786
 787         ret = -ENOMEM;
 788         info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
 789         if (!info) {
 790                 dev_err(dev, "cannot allocate memory\n");
 791                 goto out;
 792         }
 793
 794         sinfo = info->par;
 795
 796         if (dev->platform_data) {
 797                 pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
 798                 sinfo->default_bpp = pdata_sinfo->default_bpp;
 799                 sinfo->default_dmacon = pdata_sinfo->default_dmacon;
 800                 sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
 801                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 802                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 803                 sinfo->guard_time = pdata_sinfo->guard_time;
 804                 sinfo->smem_len = pdata_sinfo->smem_len;
 805                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 806                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 807         } else {
 808                 dev_err(dev, "cannot get default configuration\n");
 809                 goto free_info;
 810         }
 811         sinfo->info = info;
 812         sinfo->pdev = pdev;
 813
 814         strcpy(info->fix.id, sinfo->pdev->name);
 815         info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
 816         info->pseudo_palette = sinfo->pseudo_palette;
 817         info->fbops = &atmel_lcdfb_ops;
 818
 819         memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
 820         info->fix = atmel_lcdfb_fix;
 821
 822         /* Enable LCDC Clocks */
 823         if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
 824                 sinfo->bus_clk = clk_get(dev, "hck1");
 825                 if (IS_ERR(sinfo->bus_clk)) {
 826                         ret = PTR_ERR(sinfo->bus_clk);
 827                         goto free_info;
 828                 }
 829         }
 830         sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
 831         if (IS_ERR(sinfo->lcdc_clk)) {
 832                 ret = PTR_ERR(sinfo->lcdc_clk);
 833                 goto put_bus_clk;
 834         }
 835         atmel_lcdfb_start_clock(sinfo);
 836
 837         ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
 838                         info->monspecs.modedb_len, info->monspecs.modedb,
 839                         sinfo->default_bpp);
 840         if (!ret) {
 841                 dev_err(dev, "no suitable video mode found\n");
 842                 goto stop_clk;
 843         }
 844
 845
 846         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 847         if (!regs) {
 848                 dev_err(dev, "resources unusable\n");
 849                 ret = -ENXIO;
 850                 goto stop_clk;
 851         }
 852
 853         sinfo->irq_base = platform_get_irq(pdev, 0);
 854         if (sinfo->irq_base < 0) {
 855                 dev_err(dev, "unable to get irq\n");
 856                 ret = sinfo->irq_base;
 857                 goto stop_clk;
 858         }
 859
 860         /* Initialize video memory */
 861         map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 862         if (map) {
 863                 /* use a pre-allocated memory buffer */
 864                 info->fix.smem_start = map->start;
 865                 info->fix.smem_len = map->end - map->start + 1;
 866                 if (!request_mem_region(info->fix.smem_start,
 867                                         info->fix.smem_len, pdev->name)) {
 868                         ret = -EBUSY;
 869                         goto stop_clk;
 870                 }
 871
 872                 info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 873                 if (!info->screen_base)
 874                         goto release_intmem;
 875
 876                 /*
 877                  * Don't clear the framebuffer -- someone may have set
 878                  * up a splash image.
 879                  */
 880         } else {
 881                 /* alocate memory buffer */
 882                 ret = atmel_lcdfb_alloc_video_memory(sinfo);
 883                 if (ret < 0) {
 884                         dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
 885                         goto stop_clk;
 886                 }
 887         }
 888
 889         /* LCDC registers */
 890         info->fix.mmio_start = regs->start;
 891         info->fix.mmio_len = regs->end - regs->start + 1;
 892
 893         if (!request_mem_region(info->fix.mmio_start,
 894                                 info->fix.mmio_len, pdev->name)) {
 895                 ret = -EBUSY;
 896                 goto free_fb;
 897         }
 898
 899         sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
 900         if (!sinfo->mmio) {
 901                 dev_err(dev, "cannot map LCDC registers\n");
 902                 goto release_mem;
 903         }
 904
 905         /* Initialize PWM for contrast or backlight ("off") */
 906         init_contrast(sinfo);
 907
 908         /* interrupt */
 909         ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
 910         if (ret) {
 911                 dev_err(dev, "request_irq failed: %d\n", ret);
 912                 goto unmap_mmio;
 913         }
 914
 915         /* Some operations on the LCDC might sleep and
 916          * require a preemptible task context */
 917         INIT_WORK(&sinfo->task, atmel_lcdfb_task);
 918
 919         ret = atmel_lcdfb_init_fbinfo(sinfo);
 920         if (ret < 0) {
 921                 dev_err(dev, "init fbinfo failed: %d\n", ret);
 922                 goto unregister_irqs;
 923         }
 924
 925         /*
 926          * This makes sure that our colour bitfield
 927          * descriptors are correctly initialised.
 928          */
 929         atmel_lcdfb_check_var(&info->var, info);
 930
 931         ret = fb_set_var(info, &info->var);
 932         if (ret) {
 933                 dev_warn(dev, "unable to set display parameters\n");
 934                 goto free_cmap;
 935         }
 936
 937         dev_set_drvdata(dev, info);
 938
 939         /*
 940          * Tell the world that we're ready to go
 941          */
 942         ret = register_framebuffer(info);
 943         if (ret < 0) {
 944                 dev_err(dev, "failed to register framebuffer device: %d\n", ret);
 945                 goto reset_drvdata;
 946         }
 947
 948         /* add selected videomode to modelist */
 949         fb_var_to_videomode(&fbmode, &info->var);
 950         fb_add_videomode(&fbmode, &info->modelist);
 951
 952         /* Power up the LCDC screen */
 953         if (sinfo->atmel_lcdfb_power_control)
 954                 sinfo->atmel_lcdfb_power_control(1);
 955
 956         dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
 957                        info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
 958
 959         return 0;
 960
 961 reset_drvdata:
 962         dev_set_drvdata(dev, NULL);
 963 free_cmap:
 964         fb_dealloc_cmap(&info->cmap);
 965 unregister_irqs:
 966         cancel_work_sync(&sinfo->task);
 967         free_irq(sinfo->irq_base, info);
 968 unmap_mmio:
 969         exit_backlight(sinfo);
 970         iounmap(sinfo->mmio);
 971 release_mem:
 972         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
 973 free_fb:
 974         if (map)
 975                 iounmap(info->screen_base);
 976         else
 977                 atmel_lcdfb_free_video_memory(sinfo);
 978
 979 release_intmem:
 980         if (map)
 981                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
 982 stop_clk:
 983         atmel_lcdfb_stop_clock(sinfo);
 984         clk_put(sinfo->lcdc_clk);
 985 put_bus_clk:
 986         if (sinfo->bus_clk)
 987                 clk_put(sinfo->bus_clk);
 988 free_info:
 989         framebuffer_release(info);
 990 out:
 991         dev_dbg(dev, "%s FAILED\n", __func__);
 992         return ret;
 993 }
 994
 995 static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 996 {
 997         struct device *dev = &pdev->dev;
 998         struct fb_info *info = dev_get_drvdata(dev);
 999         struct atmel_lcdfb_info *sinfo;
1000
1001         if (!info || !info->par)
1002                 return 0;
1003         sinfo = info->par;
1004
1005         cancel_work_sync(&sinfo->task);
1006         exit_backlight(sinfo);
1007         if (sinfo->atmel_lcdfb_power_control)
1008                 sinfo->atmel_lcdfb_power_control(0);
1009         unregister_framebuffer(info);
1010         atmel_lcdfb_stop_clock(sinfo);
1011         clk_put(sinfo->lcdc_clk);
1012         if (sinfo->bus_clk)
1013                 clk_put(sinfo->bus_clk);
1014         fb_dealloc_cmap(&info->cmap);
1015         free_irq(sinfo->irq_base, info);
1016         iounmap(sinfo->mmio);
1017         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1018         if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
1019                 iounmap(info->screen_base);
1020                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1021         } else {
1022                 atmel_lcdfb_free_video_memory(sinfo);
1023         }
1024
1025         dev_set_drvdata(dev, NULL);
1026         framebuffer_release(info);
1027
1028         return 0;
1029 }
1030
1031 #ifdef CONFIG_PM
1032
1033 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
1034 {
1035         struct fb_info *info = platform_get_drvdata(pdev);
1036         struct atmel_lcdfb_info *sinfo = info->par;
1037
1038         /*
1039          * We don't want to handle interrupts while the clock is
1040          * stopped. It may take forever.
1041          */
1042         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
1043
1044         sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
1045         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
1046         if (sinfo->atmel_lcdfb_power_control)
1047                 sinfo->atmel_lcdfb_power_control(0);
1048
1049         atmel_lcdfb_stop(sinfo);
1050         atmel_lcdfb_stop_clock(sinfo);
1051
1052         return 0;
1053 }
1054
1055 static int atmel_lcdfb_resume(struct platform_device *pdev)
1056 {
1057         struct fb_info *info = platform_get_drvdata(pdev);
1058         struct atmel_lcdfb_info *sinfo = info->par;
1059
1060         atmel_lcdfb_start_clock(sinfo);
1061         atmel_lcdfb_start(sinfo);
1062         if (sinfo->atmel_lcdfb_power_control)
1063                 sinfo->atmel_lcdfb_power_control(1);
1064         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
1065
1066         /* Enable FIFO & DMA errors */
1067         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
1068                         | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
1069
1070         return 0;
1071 }
1072
1073 #else
1074 #define atmel_lcdfb_suspend     NULL
1075 #define atmel_lcdfb_resume      NULL
1076 #endif
1077
1078 static struct platform_driver atmel_lcdfb_driver = {
1079         .remove         = __exit_p(atmel_lcdfb_remove),
1080         .suspend        = atmel_lcdfb_suspend,
1081         .resume         = atmel_lcdfb_resume,
1082
1083         .driver         = {
1084                 .name   = "atmel_lcdfb",
1085                 .owner  = THIS_MODULE,
1086         },
1087 };
1088
1089 static int __init atmel_lcdfb_init(void)
1090 {
1091         return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
1092 }
1093
1094 static void __exit atmel_lcdfb_exit(void)
1095 {
1096         platform_driver_unregister(&atmel_lcdfb_driver);
1097 }
1098
1099 module_init(atmel_lcdfb_init);
1100 module_exit(atmel_lcdfb_exit);
1101
1102 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
1103 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
1104 MODULE_LICENSE("GPL");