drivers/usb/serial/qcserial.c

   1 /*
   2  * Qualcomm Serial USB driver
   3  *
   4  *      Copyright (c) 2008 QUALCOMM Incorporated.
   5  *      Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
   6  *      Copyright (c) 2009 Novell Inc.
   7  *
   8  *      This program is free software; you can redistribute it and/or
   9  *      modify it under the terms of the GNU General Public License version
  10  *      2 as published by the Free Software Foundation.
  11  *
  12  */
  13
  14 #include <linux/tty.h>
  15 #include <linux/tty_flip.h>
  16 #include <linux/usb.h>
  17 #include <linux/usb/serial.h>
  18 #include <linux/slab.h>
  19 #include "usb-wwan.h"
  20
  21 #define DRIVER_AUTHOR "Qualcomm Inc"
  22 #define DRIVER_DESC "Qualcomm USB Serial driver"
  23
  24 static int debug;
  25
  26 static const struct usb_device_id id_table[] = {
  27         {USB_DEVICE(0x05c6, 0x9211)},   /* Acer Gobi QDL device */
  28         {USB_DEVICE(0x05c6, 0x9212)},   /* Acer Gobi Modem Device */
  29         {USB_DEVICE(0x03f0, 0x1f1d)},   /* HP un2400 Gobi Modem Device */
  30         {USB_DEVICE(0x03f0, 0x201d)},   /* HP un2400 Gobi QDL Device */
  31         {USB_DEVICE(0x04da, 0x250d)},   /* Panasonic Gobi Modem device */
  32         {USB_DEVICE(0x04da, 0x250c)},   /* Panasonic Gobi QDL device */
  33         {USB_DEVICE(0x413c, 0x8172)},   /* Dell Gobi Modem device */
  34         {USB_DEVICE(0x413c, 0x8171)},   /* Dell Gobi QDL device */
  35         {USB_DEVICE(0x1410, 0xa001)},   /* Novatel Gobi Modem device */
  36         {USB_DEVICE(0x1410, 0xa008)},   /* Novatel Gobi QDL device */
  37         {USB_DEVICE(0x0b05, 0x1776)},   /* Asus Gobi Modem device */
  38         {USB_DEVICE(0x0b05, 0x1774)},   /* Asus Gobi QDL device */
  39         {USB_DEVICE(0x19d2, 0xfff3)},   /* ONDA Gobi Modem device */
  40         {USB_DEVICE(0x19d2, 0xfff2)},   /* ONDA Gobi QDL device */
  41         {USB_DEVICE(0x1557, 0x0a80)},   /* OQO Gobi QDL device */
  42         {USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
  43         {USB_DEVICE(0x05c6, 0x9002)},   /* Generic Gobi Modem device */
  44         {USB_DEVICE(0x05c6, 0x9202)},   /* Generic Gobi Modem device */
  45         {USB_DEVICE(0x05c6, 0x9203)},   /* Generic Gobi Modem device */
  46         {USB_DEVICE(0x05c6, 0x9222)},   /* Generic Gobi Modem device */
  47         {USB_DEVICE(0x05c6, 0x9008)},   /* Generic Gobi QDL device */
  48         {USB_DEVICE(0x05c6, 0x9201)},   /* Generic Gobi QDL device */
  49         {USB_DEVICE(0x05c6, 0x9221)},   /* Generic Gobi QDL device */
  50         {USB_DEVICE(0x05c6, 0x9231)},   /* Generic Gobi QDL device */
  51         {USB_DEVICE(0x1f45, 0x0001)},   /* Unknown Gobi QDL device */
  52         {USB_DEVICE(0x413c, 0x8185)},   /* Dell Gobi 2000 QDL device (N0218, VU936) */
  53         {USB_DEVICE(0x413c, 0x8186)},   /* Dell Gobi 2000 Modem device (N0218, VU936) */
  54         {USB_DEVICE(0x05c6, 0x9208)},   /* Generic Gobi 2000 QDL device */
  55         {USB_DEVICE(0x05c6, 0x920b)},   /* Generic Gobi 2000 Modem device */
  56         {USB_DEVICE(0x05c6, 0x9224)},   /* Sony Gobi 2000 QDL device (N0279, VU730) */
  57         {USB_DEVICE(0x05c6, 0x9225)},   /* Sony Gobi 2000 Modem device (N0279, VU730) */
  58         {USB_DEVICE(0x05c6, 0x9244)},   /* Samsung Gobi 2000 QDL device (VL176) */
  59         {USB_DEVICE(0x05c6, 0x9245)},   /* Samsung Gobi 2000 Modem device (VL176) */
  60         {USB_DEVICE(0x03f0, 0x241d)},   /* HP Gobi 2000 QDL device (VP412) */
  61         {USB_DEVICE(0x03f0, 0x251d)},   /* HP Gobi 2000 Modem device (VP412) */
  62         {USB_DEVICE(0x05c6, 0x9214)},   /* Acer Gobi 2000 QDL device (VP413) */
  63         {USB_DEVICE(0x05c6, 0x9215)},   /* Acer Gobi 2000 Modem device (VP413) */
  64         {USB_DEVICE(0x05c6, 0x9264)},   /* Asus Gobi 2000 QDL device (VR305) */
  65         {USB_DEVICE(0x05c6, 0x9265)},   /* Asus Gobi 2000 Modem device (VR305) */
  66         {USB_DEVICE(0x05c6, 0x9234)},   /* Top Global Gobi 2000 QDL device (VR306) */
  67         {USB_DEVICE(0x05c6, 0x9235)},   /* Top Global Gobi 2000 Modem device (VR306) */
  68         {USB_DEVICE(0x05c6, 0x9274)},   /* iRex Technologies Gobi 2000 QDL device (VR307) */
  69         {USB_DEVICE(0x05c6, 0x9275)},   /* iRex Technologies Gobi 2000 Modem device (VR307) */
  70         {USB_DEVICE(0x1199, 0x9000)},   /* Sierra Wireless Gobi 2000 QDL device (VT773) */
  71         {USB_DEVICE(0x1199, 0x9001)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  72         {USB_DEVICE(0x1199, 0x9002)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  73         {USB_DEVICE(0x1199, 0x9003)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  74         {USB_DEVICE(0x1199, 0x9004)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  75         {USB_DEVICE(0x1199, 0x9005)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  76         {USB_DEVICE(0x1199, 0x9006)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  77         {USB_DEVICE(0x1199, 0x9007)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  78         {USB_DEVICE(0x1199, 0x9008)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  79         {USB_DEVICE(0x1199, 0x9009)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  80         {USB_DEVICE(0x1199, 0x900a)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  81         {USB_DEVICE(0x16d8, 0x8001)},   /* CMDTech Gobi 2000 QDL device (VU922) */
  82         {USB_DEVICE(0x16d8, 0x8002)},   /* CMDTech Gobi 2000 Modem device (VU922) */
  83         {USB_DEVICE(0x05c6, 0x9204)},   /* Gobi 2000 QDL device */
  84         {USB_DEVICE(0x05c6, 0x9205)},   /* Gobi 2000 Modem device */
  85         { }                             /* Terminating entry */
  86 };
  87 MODULE_DEVICE_TABLE(usb, id_table);
  88
  89 static struct usb_driver qcdriver = {
  90         .name                   = "qcserial",
  91         .probe                  = usb_serial_probe,
  92         .disconnect             = usb_serial_disconnect,
  93         .id_table               = id_table,
  94         .suspend                = usb_serial_suspend,
  95         .resume                 = usb_serial_resume,
  96         .supports_autosuspend   = true,
  97 };
  98
  99 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 100 {
 101         struct usb_wwan_intf_private *data;
 102         struct usb_host_interface *intf = serial->interface->cur_altsetting;
 103         int retval = -ENODEV;
 104         __u8 nintf;
 105         __u8 ifnum;
 106
 107         dbg("%s", __func__);
 108
 109         nintf = serial->dev->actconfig->desc.bNumInterfaces;
 110         dbg("Num Interfaces = %d", nintf);
 111         ifnum = intf->desc.bInterfaceNumber;
 112         dbg("This Interface = %d", ifnum);
 113
 114         data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
 115                                          GFP_KERNEL);
 116         if (!data)
 117                 return -ENOMEM;
 118
 119         spin_lock_init(&data->susp_lock);
 120
 121         usb_enable_autosuspend(serial->dev);
 122
 123         switch (nintf) {
 124         case 1:
 125                 /* QDL mode */
 126                 /* Gobi 2000 has a single altsetting, older ones have two */
 127                 if (serial->interface->num_altsetting == 2)
 128                         intf = &serial->interface->altsetting[1];
 129                 else if (serial->interface->num_altsetting > 2)
 130                         break;
 131
 132                 if (intf->desc.bNumEndpoints == 2 &&
 133                     usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
 134                     usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
 135                         dbg("QDL port found");
 136
 137                         if (serial->interface->num_altsetting == 1)
 138                                 return 0;
 139
 140                         retval = usb_set_interface(serial->dev, ifnum, 1);
 141                         if (retval < 0) {
 142                                 dev_err(&serial->dev->dev,
 143                                         "Could not set interface, error %d\n",
 144                                         retval);
 145                                 retval = -ENODEV;
 146                                 kfree(data);
 147                         }
 148                         return retval;
 149                 }
 150                 break;
 151
 152         case 3:
 153         case 4:
 154                 /* Composite mode */
 155                 /* ifnum == 0 is a broadband network adapter */
 156                 if (ifnum == 1) {
 157                         /*
 158                          * Diagnostics Monitor (serial line 9600 8N1)
 159                          * Qualcomm DM protocol
 160                          * use "libqcdm" (ModemManager) for communication
 161                          */
 162                         dbg("Diagnostics Monitor found");
 163                         retval = usb_set_interface(serial->dev, ifnum, 0);
 164                         if (retval < 0) {
 165                                 dev_err(&serial->dev->dev,
 166                                         "Could not set interface, error %d\n",
 167                                         retval);
 168                                 retval = -ENODEV;
 169                         }
 170                 } else if (ifnum == 2) {
 171                         dbg("Modem port found");
 172                         retval = usb_set_interface(serial->dev, ifnum, 0);
 173                         if (retval < 0) {
 174                                 dev_err(&serial->dev->dev,
 175                                         "Could not set interface, error %d\n",
 176                                         retval);
 177                                 retval = -ENODEV;
 178                                 kfree(data);
 179                         }
 180                         return retval;
 181                 } else if (ifnum==3) {
 182                         /*
 183                          * NMEA (serial line 9600 8N1)
 184                          * # echo "\$GPS_START" > /dev/ttyUSBx
 185                          * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 186                          */
 187                         dbg("NMEA GPS interface found");
 188                         retval = usb_set_interface(serial->dev, ifnum, 0);
 189                         if (retval < 0) {
 190                                 dev_err(&serial->dev->dev,
 191                                         "Could not set interface, error %d\n",
 192                                         retval);
 193                                 retval = -ENODEV;
 194                         }
 195                 }
 196                 break;
 197
 198         default:
 199                 dev_err(&serial->dev->dev,
 200                         "unknown number of interfaces: %d\n", nintf);
 201                 kfree(data);
 202                 return -ENODEV;
 203         }
 204
 205         return retval;
 206 }
 207
 208 static struct usb_serial_driver qcdevice = {
 209         .driver = {
 210                 .owner     = THIS_MODULE,
 211                 .name      = "qcserial",
 212         },
 213         .description         = "Qualcomm USB modem",
 214         .id_table            = id_table,
 215         .usb_driver          = &qcdriver,
 216         .num_ports           = 1,
 217         .probe               = qcprobe,
 218         .open                = usb_wwan_open,
 219         .close               = usb_wwan_close,
 220         .write               = usb_wwan_write,
 221         .write_room          = usb_wwan_write_room,
 222         .chars_in_buffer     = usb_wwan_chars_in_buffer,
 223         .attach              = usb_wwan_startup,
 224         .disconnect          = usb_wwan_disconnect,
 225         .release             = usb_wwan_release,
 226 #ifdef CONFIG_PM
 227         .suspend             = usb_wwan_suspend,
 228         .resume              = usb_wwan_resume,
 229 #endif
 230 };
 231
 232 static int __init qcinit(void)
 233 {
 234         int retval;
 235
 236         retval = usb_serial_register(&qcdevice);
 237         if (retval)
 238                 return retval;
 239
 240         retval = usb_register(&qcdriver);
 241         if (retval) {
 242                 usb_serial_deregister(&qcdevice);
 243                 return retval;
 244         }
 245
 246         return 0;
 247 }
 248
 249 static void __exit qcexit(void)
 250 {
 251         usb_deregister(&qcdriver);
 252         usb_serial_deregister(&qcdevice);
 253 }
 254
 255 module_init(qcinit);
 256 module_exit(qcexit);
 257
 258 MODULE_AUTHOR(DRIVER_AUTHOR);
 259 MODULE_DESCRIPTION(DRIVER_DESC);
 260 MODULE_LICENSE("GPL v2");
 261
 262 module_param(debug, bool, S_IRUGO | S_IWUSR);
 263 MODULE_PARM_DESC(debug, "Debug enabled or not");