drivers/usb/serial/qcserial.c

   1 /*
   2  * Qualcomm Serial USB driver
   3  *
   4  *      Copyright (c) 2008 QUALCOMM Incorporated.
   5  *      Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
   6  *      Copyright (c) 2009 Novell Inc.
   7  *
   8  *      This program is free software; you can redistribute it and/or
   9  *      modify it under the terms of the GNU General Public License version
  10  *      2 as published by the Free Software Foundation.
  11  *
  12  */
  13
  14 #include <linux/tty.h>
  15 #include <linux/tty_flip.h>
  16 #include <linux/module.h>
  17 #include <linux/usb.h>
  18 #include <linux/usb/serial.h>
  19 #include <linux/slab.h>
  20 #include "usb-wwan.h"
  21
  22 #define DRIVER_AUTHOR "Qualcomm Inc"
  23 #define DRIVER_DESC "Qualcomm USB Serial driver"
  24
  25 static int debug;
  26
  27 static const struct usb_device_id id_table[] = {
  28         {USB_DEVICE(0x05c6, 0x9211)},   /* Acer Gobi QDL device */
  29         {USB_DEVICE(0x05c6, 0x9212)},   /* Acer Gobi Modem Device */
  30         {USB_DEVICE(0x03f0, 0x1f1d)},   /* HP un2400 Gobi Modem Device */
  31         {USB_DEVICE(0x03f0, 0x201d)},   /* HP un2400 Gobi QDL Device */
  32         {USB_DEVICE(0x03f0, 0x371d)},   /* HP un2430 Mobile Broadband Module */
  33         {USB_DEVICE(0x04da, 0x250d)},   /* Panasonic Gobi Modem device */
  34         {USB_DEVICE(0x04da, 0x250c)},   /* Panasonic Gobi QDL device */
  35         {USB_DEVICE(0x413c, 0x8172)},   /* Dell Gobi Modem device */
  36         {USB_DEVICE(0x413c, 0x8171)},   /* Dell Gobi QDL device */
  37         {USB_DEVICE(0x1410, 0xa001)},   /* Novatel Gobi Modem device */
  38         {USB_DEVICE(0x1410, 0xa008)},   /* Novatel Gobi QDL device */
  39         {USB_DEVICE(0x0b05, 0x1776)},   /* Asus Gobi Modem device */
  40         {USB_DEVICE(0x0b05, 0x1774)},   /* Asus Gobi QDL device */
  41         {USB_DEVICE(0x19d2, 0xfff3)},   /* ONDA Gobi Modem device */
  42         {USB_DEVICE(0x19d2, 0xfff2)},   /* ONDA Gobi QDL device */
  43         {USB_DEVICE(0x1557, 0x0a80)},   /* OQO Gobi QDL device */
  44         {USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
  45         {USB_DEVICE(0x05c6, 0x9002)},   /* Generic Gobi Modem device */
  46         {USB_DEVICE(0x05c6, 0x9202)},   /* Generic Gobi Modem device */
  47         {USB_DEVICE(0x05c6, 0x9203)},   /* Generic Gobi Modem device */
  48         {USB_DEVICE(0x05c6, 0x9222)},   /* Generic Gobi Modem device */
  49         {USB_DEVICE(0x05c6, 0x9008)},   /* Generic Gobi QDL device */
  50         {USB_DEVICE(0x05c6, 0x9009)},   /* Generic Gobi Modem device */
  51         {USB_DEVICE(0x05c6, 0x9201)},   /* Generic Gobi QDL device */
  52         {USB_DEVICE(0x05c6, 0x9221)},   /* Generic Gobi QDL device */
  53         {USB_DEVICE(0x05c6, 0x9231)},   /* Generic Gobi QDL device */
  54         {USB_DEVICE(0x1f45, 0x0001)},   /* Unknown Gobi QDL device */
  55         {USB_DEVICE(0x413c, 0x8185)},   /* Dell Gobi 2000 QDL device (N0218, VU936) */
  56         {USB_DEVICE(0x413c, 0x8186)},   /* Dell Gobi 2000 Modem device (N0218, VU936) */
  57         {USB_DEVICE(0x05c6, 0x9208)},   /* Generic Gobi 2000 QDL device */
  58         {USB_DEVICE(0x05c6, 0x920b)},   /* Generic Gobi 2000 Modem device */
  59         {USB_DEVICE(0x05c6, 0x9224)},   /* Sony Gobi 2000 QDL device (N0279, VU730) */
  60         {USB_DEVICE(0x05c6, 0x9225)},   /* Sony Gobi 2000 Modem device (N0279, VU730) */
  61         {USB_DEVICE(0x05c6, 0x9244)},   /* Samsung Gobi 2000 QDL device (VL176) */
  62         {USB_DEVICE(0x05c6, 0x9245)},   /* Samsung Gobi 2000 Modem device (VL176) */
  63         {USB_DEVICE(0x03f0, 0x241d)},   /* HP Gobi 2000 QDL device (VP412) */
  64         {USB_DEVICE(0x03f0, 0x251d)},   /* HP Gobi 2000 Modem device (VP412) */
  65         {USB_DEVICE(0x05c6, 0x9214)},   /* Acer Gobi 2000 QDL device (VP413) */
  66         {USB_DEVICE(0x05c6, 0x9215)},   /* Acer Gobi 2000 Modem device (VP413) */
  67         {USB_DEVICE(0x05c6, 0x9264)},   /* Asus Gobi 2000 QDL device (VR305) */
  68         {USB_DEVICE(0x05c6, 0x9265)},   /* Asus Gobi 2000 Modem device (VR305) */
  69         {USB_DEVICE(0x05c6, 0x9234)},   /* Top Global Gobi 2000 QDL device (VR306) */
  70         {USB_DEVICE(0x05c6, 0x9235)},   /* Top Global Gobi 2000 Modem device (VR306) */
  71         {USB_DEVICE(0x05c6, 0x9274)},   /* iRex Technologies Gobi 2000 QDL device (VR307) */
  72         {USB_DEVICE(0x05c6, 0x9275)},   /* iRex Technologies Gobi 2000 Modem device (VR307) */
  73         {USB_DEVICE(0x1199, 0x9000)},   /* Sierra Wireless Gobi 2000 QDL device (VT773) */
  74         {USB_DEVICE(0x1199, 0x9001)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  75         {USB_DEVICE(0x1199, 0x9002)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  76         {USB_DEVICE(0x1199, 0x9003)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  77         {USB_DEVICE(0x1199, 0x9004)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  78         {USB_DEVICE(0x1199, 0x9005)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  79         {USB_DEVICE(0x1199, 0x9006)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  80         {USB_DEVICE(0x1199, 0x9007)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  81         {USB_DEVICE(0x1199, 0x9008)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  82         {USB_DEVICE(0x1199, 0x9009)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  83         {USB_DEVICE(0x1199, 0x900a)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  84         {USB_DEVICE(0x1199, 0x9011)},   /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
  85         {USB_DEVICE(0x16d8, 0x8001)},   /* CMDTech Gobi 2000 QDL device (VU922) */
  86         {USB_DEVICE(0x16d8, 0x8002)},   /* CMDTech Gobi 2000 Modem device (VU922) */
  87         {USB_DEVICE(0x05c6, 0x9204)},   /* Gobi 2000 QDL device */
  88         {USB_DEVICE(0x05c6, 0x9205)},   /* Gobi 2000 Modem device */
  89         {USB_DEVICE(0x1199, 0x9013)},   /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
  90         { }                             /* Terminating entry */
  91 };
  92 MODULE_DEVICE_TABLE(usb, id_table);
  93
  94 static struct usb_driver qcdriver = {
  95         .name                   = "qcserial",
  96         .probe                  = usb_serial_probe,
  97         .disconnect             = usb_serial_disconnect,
  98         .id_table               = id_table,
  99         .suspend                = usb_serial_suspend,
 100         .resume                 = usb_serial_resume,
 101         .supports_autosuspend   = true,
 102 };
 103
 104 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 105 {
 106         struct usb_wwan_intf_private *data;
 107         struct usb_host_interface *intf = serial->interface->cur_altsetting;
 108         int retval = -ENODEV;
 109         __u8 nintf;
 110         __u8 ifnum;
 111
 112         dbg("%s", __func__);
 113
 114         nintf = serial->dev->actconfig->desc.bNumInterfaces;
 115         dbg("Num Interfaces = %d", nintf);
 116         ifnum = intf->desc.bInterfaceNumber;
 117         dbg("This Interface = %d", ifnum);
 118
 119         data = kzalloc(sizeof(struct usb_wwan_intf_private),
 120                                          GFP_KERNEL);
 121         if (!data)
 122                 return -ENOMEM;
 123
 124         spin_lock_init(&data->susp_lock);
 125
 126         usb_enable_autosuspend(serial->dev);
 127
 128         switch (nintf) {
 129         case 1:
 130                 /* QDL mode */
 131                 /* Gobi 2000 has a single altsetting, older ones have two */
 132                 if (serial->interface->num_altsetting == 2)
 133                         intf = &serial->interface->altsetting[1];
 134                 else if (serial->interface->num_altsetting > 2)
 135                         break;
 136
 137                 if (intf->desc.bNumEndpoints == 2 &&
 138                     usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
 139                     usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
 140                         dbg("QDL port found");
 141
 142                         if (serial->interface->num_altsetting == 1) {
 143                                 retval = 0; /* Success */
 144                                 break;
 145                         }
 146
 147                         retval = usb_set_interface(serial->dev, ifnum, 1);
 148                         if (retval < 0) {
 149                                 dev_err(&serial->dev->dev,
 150                                         "Could not set interface, error %d\n",
 151                                         retval);
 152                                 retval = -ENODEV;
 153                                 kfree(data);
 154                         }
 155                 }
 156                 break;
 157
 158         case 3:
 159         case 4:
 160                 /* Composite mode */
 161                 /* ifnum == 0 is a broadband network adapter */
 162                 if (ifnum == 1) {
 163                         /*
 164                          * Diagnostics Monitor (serial line 9600 8N1)
 165                          * Qualcomm DM protocol
 166                          * use "libqcdm" (ModemManager) for communication
 167                          */
 168                         dbg("Diagnostics Monitor found");
 169                         retval = usb_set_interface(serial->dev, ifnum, 0);
 170                         if (retval < 0) {
 171                                 dev_err(&serial->dev->dev,
 172                                         "Could not set interface, error %d\n",
 173                                         retval);
 174                                 retval = -ENODEV;
 175                                 kfree(data);
 176                         }
 177                 } else if (ifnum == 2) {
 178                         dbg("Modem port found");
 179                         retval = usb_set_interface(serial->dev, ifnum, 0);
 180                         if (retval < 0) {
 181                                 dev_err(&serial->dev->dev,
 182                                         "Could not set interface, error %d\n",
 183                                         retval);
 184                                 retval = -ENODEV;
 185                                 kfree(data);
 186                         }
 187                 } else if (ifnum==3) {
 188                         /*
 189                          * NMEA (serial line 9600 8N1)
 190                          * # echo "\$GPS_START" > /dev/ttyUSBx
 191                          * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 192                          */
 193                         dbg("NMEA GPS interface found");
 194                         retval = usb_set_interface(serial->dev, ifnum, 0);
 195                         if (retval < 0) {
 196                                 dev_err(&serial->dev->dev,
 197                                         "Could not set interface, error %d\n",
 198                                         retval);
 199                                 retval = -ENODEV;
 200                                 kfree(data);
 201                         }
 202                 }
 203                 break;
 204
 205         default:
 206                 dev_err(&serial->dev->dev,
 207                         "unknown number of interfaces: %d\n", nintf);
 208                 kfree(data);
 209                 retval = -ENODEV;
 210         }
 211
 212         /* Set serial->private if not returning -ENODEV */
 213         if (retval != -ENODEV)
 214                 usb_set_serial_data(serial, data);
 215         return retval;
 216 }
 217
 218 static void qc_release(struct usb_serial *serial)
 219 {
 220         struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
 221
 222         dbg("%s", __func__);
 223
 224         /* Call usb_wwan release & free the private data allocated in qcprobe */
 225         usb_wwan_release(serial);
 226         usb_set_serial_data(serial, NULL);
 227         kfree(priv);
 228 }
 229
 230 static struct usb_serial_driver qcdevice = {
 231         .driver = {
 232                 .owner     = THIS_MODULE,
 233                 .name      = "qcserial",
 234         },
 235         .description         = "Qualcomm USB modem",
 236         .id_table            = id_table,
 237         .usb_driver          = &qcdriver,
 238         .num_ports           = 1,
 239         .probe               = qcprobe,
 240         .open                = usb_wwan_open,
 241         .close               = usb_wwan_close,
 242         .write               = usb_wwan_write,
 243         .write_room          = usb_wwan_write_room,
 244         .chars_in_buffer     = usb_wwan_chars_in_buffer,
 245         .attach              = usb_wwan_startup,
 246         .disconnect          = usb_wwan_disconnect,
 247         .release             = qc_release,
 248 #ifdef CONFIG_PM
 249         .suspend             = usb_wwan_suspend,
 250         .resume              = usb_wwan_resume,
 251 #endif
 252 };
 253
 254 static int __init qcinit(void)
 255 {
 256         int retval;
 257
 258         retval = usb_serial_register(&qcdevice);
 259         if (retval)
 260                 return retval;
 261
 262         retval = usb_register(&qcdriver);
 263         if (retval) {
 264                 usb_serial_deregister(&qcdevice);
 265                 return retval;
 266         }
 267
 268         return 0;
 269 }
 270
 271 static void __exit qcexit(void)
 272 {
 273         usb_deregister(&qcdriver);
 274         usb_serial_deregister(&qcdevice);
 275 }
 276
 277 module_init(qcinit);
 278 module_exit(qcexit);
 279
 280 MODULE_AUTHOR(DRIVER_AUTHOR);
 281 MODULE_DESCRIPTION(DRIVER_DESC);
 282 MODULE_LICENSE("GPL v2");
 283
 284 module_param(debug, bool, S_IRUGO | S_IWUSR);
 285 MODULE_PARM_DESC(debug, "Debug enabled or not");