USB: qcserial: add several new serial devices
[pandora-kernel.git] / drivers / usb / serial / qcserial.c
1 /*
2  * Qualcomm Serial USB driver
3  *
4  *      Copyright (c) 2008 QUALCOMM Incorporated.
5  *      Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
6  *      Copyright (c) 2009 Novell Inc.
7  *
8  *      This program is free software; you can redistribute it and/or
9  *      modify it under the terms of the GNU General Public License version
10  *      2 as published by the Free Software Foundation.
11  *
12  */
13
14 #include <linux/tty.h>
15 #include <linux/tty_flip.h>
16 #include <linux/module.h>
17 #include <linux/usb.h>
18 #include <linux/usb/serial.h>
19 #include <linux/slab.h>
20 #include "usb-wwan.h"
21
22 #define DRIVER_AUTHOR "Qualcomm Inc"
23 #define DRIVER_DESC "Qualcomm USB Serial driver"
24
25 static int debug;
26
27 static const struct usb_device_id id_table[] = {
28         {USB_DEVICE(0x05c6, 0x9211)},   /* Acer Gobi QDL device */
29         {USB_DEVICE(0x05c6, 0x9212)},   /* Acer Gobi Modem Device */
30         {USB_DEVICE(0x03f0, 0x1f1d)},   /* HP un2400 Gobi Modem Device */
31         {USB_DEVICE(0x03f0, 0x201d)},   /* HP un2400 Gobi QDL Device */
32         {USB_DEVICE(0x03f0, 0x371d)},   /* HP un2430 Mobile Broadband Module */
33         {USB_DEVICE(0x04da, 0x250d)},   /* Panasonic Gobi Modem device */
34         {USB_DEVICE(0x04da, 0x250c)},   /* Panasonic Gobi QDL device */
35         {USB_DEVICE(0x413c, 0x8172)},   /* Dell Gobi Modem device */
36         {USB_DEVICE(0x413c, 0x8171)},   /* Dell Gobi QDL device */
37         {USB_DEVICE(0x1410, 0xa001)},   /* Novatel Gobi Modem device */
38         {USB_DEVICE(0x1410, 0xa008)},   /* Novatel Gobi QDL device */
39         {USB_DEVICE(0x1410, 0xa010)},   /* Novatel Gobi QDL device */
40         {USB_DEVICE(0x1410, 0xa011)},   /* Novatel Gobi QDL device */
41         {USB_DEVICE(0x1410, 0xa012)},   /* Novatel Gobi QDL device */
42         {USB_DEVICE(0x1410, 0xa013)},   /* Novatel Gobi QDL device */
43         {USB_DEVICE(0x1410, 0xa014)},   /* Novatel Gobi QDL device */
44         {USB_DEVICE(0x0b05, 0x1776)},   /* Asus Gobi Modem device */
45         {USB_DEVICE(0x0b05, 0x1774)},   /* Asus Gobi QDL device */
46         {USB_DEVICE(0x19d2, 0xfff3)},   /* ONDA Gobi Modem device */
47         {USB_DEVICE(0x19d2, 0xfff2)},   /* ONDA Gobi QDL device */
48         {USB_DEVICE(0x1557, 0x0a80)},   /* OQO Gobi QDL device */
49         {USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
50         {USB_DEVICE(0x05c6, 0x9002)},   /* Generic Gobi Modem device */
51         {USB_DEVICE(0x05c6, 0x9202)},   /* Generic Gobi Modem device */
52         {USB_DEVICE(0x05c6, 0x9203)},   /* Generic Gobi Modem device */
53         {USB_DEVICE(0x05c6, 0x9222)},   /* Generic Gobi Modem device */
54         {USB_DEVICE(0x05c6, 0x9008)},   /* Generic Gobi QDL device */
55         {USB_DEVICE(0x05c6, 0x9009)},   /* Generic Gobi Modem device */
56         {USB_DEVICE(0x05c6, 0x9201)},   /* Generic Gobi QDL device */
57         {USB_DEVICE(0x05c6, 0x9221)},   /* Generic Gobi QDL device */
58         {USB_DEVICE(0x05c6, 0x9231)},   /* Generic Gobi QDL device */
59         {USB_DEVICE(0x1f45, 0x0001)},   /* Unknown Gobi QDL device */
60         {USB_DEVICE(0x413c, 0x8185)},   /* Dell Gobi 2000 QDL device (N0218, VU936) */
61         {USB_DEVICE(0x413c, 0x8186)},   /* Dell Gobi 2000 Modem device (N0218, VU936) */
62         {USB_DEVICE(0x05c6, 0x9208)},   /* Generic Gobi 2000 QDL device */
63         {USB_DEVICE(0x05c6, 0x920b)},   /* Generic Gobi 2000 Modem device */
64         {USB_DEVICE(0x05c6, 0x9224)},   /* Sony Gobi 2000 QDL device (N0279, VU730) */
65         {USB_DEVICE(0x05c6, 0x9225)},   /* Sony Gobi 2000 Modem device (N0279, VU730) */
66         {USB_DEVICE(0x05c6, 0x9244)},   /* Samsung Gobi 2000 QDL device (VL176) */
67         {USB_DEVICE(0x05c6, 0x9245)},   /* Samsung Gobi 2000 Modem device (VL176) */
68         {USB_DEVICE(0x03f0, 0x241d)},   /* HP Gobi 2000 QDL device (VP412) */
69         {USB_DEVICE(0x03f0, 0x251d)},   /* HP Gobi 2000 Modem device (VP412) */
70         {USB_DEVICE(0x05c6, 0x9214)},   /* Acer Gobi 2000 QDL device (VP413) */
71         {USB_DEVICE(0x05c6, 0x9215)},   /* Acer Gobi 2000 Modem device (VP413) */
72         {USB_DEVICE(0x05c6, 0x9264)},   /* Asus Gobi 2000 QDL device (VR305) */
73         {USB_DEVICE(0x05c6, 0x9265)},   /* Asus Gobi 2000 Modem device (VR305) */
74         {USB_DEVICE(0x05c6, 0x9234)},   /* Top Global Gobi 2000 QDL device (VR306) */
75         {USB_DEVICE(0x05c6, 0x9235)},   /* Top Global Gobi 2000 Modem device (VR306) */
76         {USB_DEVICE(0x05c6, 0x9274)},   /* iRex Technologies Gobi 2000 QDL device (VR307) */
77         {USB_DEVICE(0x05c6, 0x9275)},   /* iRex Technologies Gobi 2000 Modem device (VR307) */
78         {USB_DEVICE(0x1199, 0x9000)},   /* Sierra Wireless Gobi 2000 QDL device (VT773) */
79         {USB_DEVICE(0x1199, 0x9001)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
80         {USB_DEVICE(0x1199, 0x9002)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
81         {USB_DEVICE(0x1199, 0x9003)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
82         {USB_DEVICE(0x1199, 0x9004)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
83         {USB_DEVICE(0x1199, 0x9005)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
84         {USB_DEVICE(0x1199, 0x9006)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
85         {USB_DEVICE(0x1199, 0x9007)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
86         {USB_DEVICE(0x1199, 0x9008)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
87         {USB_DEVICE(0x1199, 0x9009)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
88         {USB_DEVICE(0x1199, 0x900a)},   /* Sierra Wireless Gobi 2000 Modem device (VT773) */
89         {USB_DEVICE(0x1199, 0x9011)},   /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
90         {USB_DEVICE(0x16d8, 0x8001)},   /* CMDTech Gobi 2000 QDL device (VU922) */
91         {USB_DEVICE(0x16d8, 0x8002)},   /* CMDTech Gobi 2000 Modem device (VU922) */
92         {USB_DEVICE(0x05c6, 0x9204)},   /* Gobi 2000 QDL device */
93         {USB_DEVICE(0x05c6, 0x9205)},   /* Gobi 2000 Modem device */
94
95         {USB_DEVICE(0x05c6, 0x920c)},   /* Gobi 3000 QDL */
96         {USB_DEVICE(0x05c6, 0x920d)},   /* Gobi 3000 Composite */
97         {USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
98         {USB_DEVICE(0x1410, 0xa021)},   /* Novatel Gobi 3000 Composite */
99         {USB_DEVICE(0x413c, 0x8193)},   /* Dell Gobi 3000 QDL */
100         {USB_DEVICE(0x413c, 0x8194)},   /* Dell Gobi 3000 Composite */
101         {USB_DEVICE(0x1199, 0x9013)},   /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
102         {USB_DEVICE(0x12D1, 0x14F0)},   /* Sony Gobi 3000 QDL */
103         {USB_DEVICE(0x12D1, 0x14F1)},   /* Sony Gobi 3000 Composite */
104         { }                             /* Terminating entry */
105 };
106 MODULE_DEVICE_TABLE(usb, id_table);
107
108 static struct usb_driver qcdriver = {
109         .name                   = "qcserial",
110         .probe                  = usb_serial_probe,
111         .disconnect             = usb_serial_disconnect,
112         .id_table               = id_table,
113         .suspend                = usb_serial_suspend,
114         .resume                 = usb_serial_resume,
115         .supports_autosuspend   = true,
116 };
117
118 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
119 {
120         struct usb_wwan_intf_private *data;
121         struct usb_host_interface *intf = serial->interface->cur_altsetting;
122         int retval = -ENODEV;
123         __u8 nintf;
124         __u8 ifnum;
125
126         dbg("%s", __func__);
127
128         nintf = serial->dev->actconfig->desc.bNumInterfaces;
129         dbg("Num Interfaces = %d", nintf);
130         ifnum = intf->desc.bInterfaceNumber;
131         dbg("This Interface = %d", ifnum);
132
133         data = kzalloc(sizeof(struct usb_wwan_intf_private),
134                                          GFP_KERNEL);
135         if (!data)
136                 return -ENOMEM;
137
138         spin_lock_init(&data->susp_lock);
139
140         usb_enable_autosuspend(serial->dev);
141
142         switch (nintf) {
143         case 1:
144                 /* QDL mode */
145                 /* Gobi 2000 has a single altsetting, older ones have two */
146                 if (serial->interface->num_altsetting == 2)
147                         intf = &serial->interface->altsetting[1];
148                 else if (serial->interface->num_altsetting > 2)
149                         break;
150
151                 if (intf->desc.bNumEndpoints == 2 &&
152                     usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
153                     usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
154                         dbg("QDL port found");
155
156                         if (serial->interface->num_altsetting == 1) {
157                                 retval = 0; /* Success */
158                                 break;
159                         }
160
161                         retval = usb_set_interface(serial->dev, ifnum, 1);
162                         if (retval < 0) {
163                                 dev_err(&serial->dev->dev,
164                                         "Could not set interface, error %d\n",
165                                         retval);
166                                 retval = -ENODEV;
167                                 kfree(data);
168                         }
169                 }
170                 break;
171
172         case 3:
173         case 4:
174                 /* Composite mode */
175                 /* ifnum == 0 is a broadband network adapter */
176                 if (ifnum == 1) {
177                         /*
178                          * Diagnostics Monitor (serial line 9600 8N1)
179                          * Qualcomm DM protocol
180                          * use "libqcdm" (ModemManager) for communication
181                          */
182                         dbg("Diagnostics Monitor found");
183                         retval = usb_set_interface(serial->dev, ifnum, 0);
184                         if (retval < 0) {
185                                 dev_err(&serial->dev->dev,
186                                         "Could not set interface, error %d\n",
187                                         retval);
188                                 retval = -ENODEV;
189                                 kfree(data);
190                         }
191                 } else if (ifnum == 2) {
192                         dbg("Modem port found");
193                         retval = usb_set_interface(serial->dev, ifnum, 0);
194                         if (retval < 0) {
195                                 dev_err(&serial->dev->dev,
196                                         "Could not set interface, error %d\n",
197                                         retval);
198                                 retval = -ENODEV;
199                                 kfree(data);
200                         }
201                 } else if (ifnum==3) {
202                         /*
203                          * NMEA (serial line 9600 8N1)
204                          * # echo "\$GPS_START" > /dev/ttyUSBx
205                          * # echo "\$GPS_STOP"  > /dev/ttyUSBx
206                          */
207                         dbg("NMEA GPS interface found");
208                         retval = usb_set_interface(serial->dev, ifnum, 0);
209                         if (retval < 0) {
210                                 dev_err(&serial->dev->dev,
211                                         "Could not set interface, error %d\n",
212                                         retval);
213                                 retval = -ENODEV;
214                                 kfree(data);
215                         }
216                 }
217                 break;
218
219         default:
220                 dev_err(&serial->dev->dev,
221                         "unknown number of interfaces: %d\n", nintf);
222                 kfree(data);
223                 retval = -ENODEV;
224         }
225
226         /* Set serial->private if not returning -ENODEV */
227         if (retval != -ENODEV)
228                 usb_set_serial_data(serial, data);
229         return retval;
230 }
231
232 static void qc_release(struct usb_serial *serial)
233 {
234         struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
235
236         dbg("%s", __func__);
237
238         /* Call usb_wwan release & free the private data allocated in qcprobe */
239         usb_wwan_release(serial);
240         usb_set_serial_data(serial, NULL);
241         kfree(priv);
242 }
243
244 static struct usb_serial_driver qcdevice = {
245         .driver = {
246                 .owner     = THIS_MODULE,
247                 .name      = "qcserial",
248         },
249         .description         = "Qualcomm USB modem",
250         .id_table            = id_table,
251         .usb_driver          = &qcdriver,
252         .num_ports           = 1,
253         .probe               = qcprobe,
254         .open                = usb_wwan_open,
255         .close               = usb_wwan_close,
256         .write               = usb_wwan_write,
257         .write_room          = usb_wwan_write_room,
258         .chars_in_buffer     = usb_wwan_chars_in_buffer,
259         .attach              = usb_wwan_startup,
260         .disconnect          = usb_wwan_disconnect,
261         .release             = qc_release,
262 #ifdef CONFIG_PM
263         .suspend             = usb_wwan_suspend,
264         .resume              = usb_wwan_resume,
265 #endif
266 };
267
268 static int __init qcinit(void)
269 {
270         int retval;
271
272         retval = usb_serial_register(&qcdevice);
273         if (retval)
274                 return retval;
275
276         retval = usb_register(&qcdriver);
277         if (retval) {
278                 usb_serial_deregister(&qcdevice);
279                 return retval;
280         }
281
282         return 0;
283 }
284
285 static void __exit qcexit(void)
286 {
287         usb_deregister(&qcdriver);
288         usb_serial_deregister(&qcdevice);
289 }
290
291 module_init(qcinit);
292 module_exit(qcexit);
293
294 MODULE_AUTHOR(DRIVER_AUTHOR);
295 MODULE_DESCRIPTION(DRIVER_DESC);
296 MODULE_LICENSE("GPL v2");
297
298 module_param(debug, bool, S_IRUGO | S_IWUSR);
299 MODULE_PARM_DESC(debug, "Debug enabled or not");