drivers/usb/serial/oti6858.c

   1 /*
   2  * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
   3  *
   4  * Copyleft  (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
   5  * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
   6  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
   7  * Copyright (C) 2003 IBM Corp.
   8  *
   9  * Many thanks to the authors of pl2303 driver: all functions in this file
  10  * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
  11  *
  12  * Warning! You use this driver on your own risk! The only official
  13  * description of this device I have is datasheet from manufacturer,
  14  * and it doesn't contain almost any information needed to write a driver.
  15  * Almost all knowlegde used while writing this driver was gathered by:
  16  *  - analyzing traffic between device and the M$ Windows 2000 driver,
  17  *  - trying different bit combinations and checking pin states
  18  *    with a voltmeter,
  19  *  - receiving malformed frames and producing buffer overflows
  20  *    to learn how errors are reported,
  21  * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
  22  * CONNECTED TO IT!
  23  *
  24  * This program is free software; you can redistribute it and/or modify
  25  * it under the terms of the GNU General Public License as published by
  26  * the Free Software Foundation; either version 2 of the License.
  27  *
  28  * See Documentation/usb/usb-serial.txt for more information on using this
  29  * driver
  30  *
  31  * TODO:
  32  *  - implement correct flushing for ioctls and oti6858_close()
  33  *  - check how errors (rx overflow, parity error, framing error) are reported
  34  *  - implement oti6858_break_ctl()
  35  *  - implement more ioctls
  36  *  - test/implement flow control
  37  *  - allow setting custom baud rates
  38  */
  39
  40 #include <linux/kernel.h>
  41 #include <linux/errno.h>
  42 #include <linux/init.h>
  43 #include <linux/slab.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_driver.h>
  46 #include <linux/tty_flip.h>
  47 #include <linux/serial.h>
  48 #include <linux/module.h>
  49 #include <linux/moduleparam.h>
  50 #include <linux/spinlock.h>
  51 #include <linux/usb.h>
  52 #include <linux/usb/serial.h>
  53 #include <linux/uaccess.h>
  54 #include <linux/kfifo.h>
  55 #include "oti6858.h"
  56
  57 #define OTI6858_DESCRIPTION \
  58         "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
  59 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
  60 #define OTI6858_VERSION "0.2"
  61
  62 static const struct usb_device_id id_table[] = {
  63         { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
  64         { }
  65 };
  66
  67 MODULE_DEVICE_TABLE(usb, id_table);
  68
  69 static struct usb_driver oti6858_driver = {
  70         .name =         "oti6858",
  71         .probe =        usb_serial_probe,
  72         .disconnect =   usb_serial_disconnect,
  73         .id_table =     id_table,
  74         .no_dynamic_id =        1,
  75 };
  76
  77 static int debug;
  78
  79 /* requests */
  80 #define OTI6858_REQ_GET_STATUS          (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
  81 #define OTI6858_REQ_T_GET_STATUS        0x01
  82
  83 #define OTI6858_REQ_SET_LINE            (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
  84 #define OTI6858_REQ_T_SET_LINE          0x00
  85
  86 #define OTI6858_REQ_CHECK_TXBUFF        (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
  87 #define OTI6858_REQ_T_CHECK_TXBUFF      0x00
  88
  89 /* format of the control packet */
  90 struct oti6858_control_pkt {
  91         __le16  divisor;        /* baud rate = 96000000 / (16 * divisor), LE */
  92 #define OTI6858_MAX_BAUD_RATE   3000000
  93         u8      frame_fmt;
  94 #define FMT_STOP_BITS_MASK      0xc0
  95 #define FMT_STOP_BITS_1         0x00
  96 #define FMT_STOP_BITS_2         0x40    /* 1.5 stop bits if FMT_DATA_BITS_5 */
  97 #define FMT_PARITY_MASK         0x38
  98 #define FMT_PARITY_NONE         0x00
  99 #define FMT_PARITY_ODD          0x08
 100 #define FMT_PARITY_EVEN         0x18
 101 #define FMT_PARITY_MARK         0x28
 102 #define FMT_PARITY_SPACE        0x38
 103 #define FMT_DATA_BITS_MASK      0x03
 104 #define FMT_DATA_BITS_5         0x00
 105 #define FMT_DATA_BITS_6         0x01
 106 #define FMT_DATA_BITS_7         0x02
 107 #define FMT_DATA_BITS_8         0x03
 108         u8      something;      /* always equals 0x43 */
 109         u8      control;        /* settings of flow control lines */
 110 #define CONTROL_MASK            0x0c
 111 #define CONTROL_DTR_HIGH        0x08
 112 #define CONTROL_RTS_HIGH        0x04
 113         u8      tx_status;
 114 #define TX_BUFFER_EMPTIED       0x09
 115         u8      pin_state;
 116 #define PIN_MASK                0x3f
 117 #define PIN_RTS                 0x20    /* output pin */
 118 #define PIN_CTS                 0x10    /* input pin, active low */
 119 #define PIN_DSR                 0x08    /* input pin, active low */
 120 #define PIN_DTR                 0x04    /* output pin */
 121 #define PIN_RI                  0x02    /* input pin, active low */
 122 #define PIN_DCD                 0x01    /* input pin, active low */
 123         u8      rx_bytes_avail;         /* number of bytes in rx buffer */;
 124 };
 125
 126 #define OTI6858_CTRL_PKT_SIZE   sizeof(struct oti6858_control_pkt)
 127 #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
 128         (((a)->divisor == (priv)->pending_setup.divisor) \
 129           && ((a)->control == (priv)->pending_setup.control) \
 130           && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 131
 132 /* function prototypes */
 133 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 134 static void oti6858_close(struct usb_serial_port *port);
 135 static void oti6858_set_termios(struct tty_struct *tty,
 136                         struct usb_serial_port *port, struct ktermios *old);
 137 static void oti6858_init_termios(struct tty_struct *tty);
 138 static int oti6858_ioctl(struct tty_struct *tty,
 139                         unsigned int cmd, unsigned long arg);
 140 static void oti6858_read_int_callback(struct urb *urb);
 141 static void oti6858_read_bulk_callback(struct urb *urb);
 142 static void oti6858_write_bulk_callback(struct urb *urb);
 143 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 144                         const unsigned char *buf, int count);
 145 static int oti6858_write_room(struct tty_struct *tty);
 146 static int oti6858_chars_in_buffer(struct tty_struct *tty);
 147 static int oti6858_tiocmget(struct tty_struct *tty);
 148 static int oti6858_tiocmset(struct tty_struct *tty,
 149                                 unsigned int set, unsigned int clear);
 150 static int oti6858_startup(struct usb_serial *serial);
 151 static void oti6858_release(struct usb_serial *serial);
 152
 153 /* device info */
 154 static struct usb_serial_driver oti6858_device = {
 155         .driver = {
 156                 .owner =        THIS_MODULE,
 157                 .name =         "oti6858",
 158         },
 159         .id_table =             id_table,
 160         .usb_driver =           &oti6858_driver,
 161         .num_ports =            1,
 162         .open =                 oti6858_open,
 163         .close =                oti6858_close,
 164         .write =                oti6858_write,
 165         .ioctl =                oti6858_ioctl,
 166         .set_termios =          oti6858_set_termios,
 167         .init_termios =         oti6858_init_termios,
 168         .tiocmget =             oti6858_tiocmget,
 169         .tiocmset =             oti6858_tiocmset,
 170         .read_bulk_callback =   oti6858_read_bulk_callback,
 171         .read_int_callback =    oti6858_read_int_callback,
 172         .write_bulk_callback =  oti6858_write_bulk_callback,
 173         .write_room =           oti6858_write_room,
 174         .chars_in_buffer =      oti6858_chars_in_buffer,
 175         .attach =               oti6858_startup,
 176         .release =              oti6858_release,
 177 };
 178
 179 struct oti6858_private {
 180         spinlock_t lock;
 181
 182         struct oti6858_control_pkt status;
 183
 184         struct {
 185                 u8 read_urb_in_use;
 186                 u8 write_urb_in_use;
 187         } flags;
 188         struct delayed_work delayed_write_work;
 189
 190         struct {
 191                 __le16 divisor;
 192                 u8 frame_fmt;
 193                 u8 control;
 194         } pending_setup;
 195         u8 transient;
 196         u8 setup_done;
 197         struct delayed_work delayed_setup_work;
 198
 199         wait_queue_head_t intr_wait;
 200         struct usb_serial_port *port;   /* USB port with which associated */
 201 };
 202
 203 static void setup_line(struct work_struct *work)
 204 {
 205         struct oti6858_private *priv = container_of(work,
 206                         struct oti6858_private, delayed_setup_work.work);
 207         struct usb_serial_port *port = priv->port;
 208         struct oti6858_control_pkt *new_setup;
 209         unsigned long flags;
 210         int result;
 211
 212         dbg("%s(port = %d)", __func__, port->number);
 213
 214         new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 215         if (new_setup == NULL) {
 216                 dev_err(&port->dev, "%s(): out of memory!\n", __func__);
 217                 /* we will try again */
 218                 schedule_delayed_work(&priv->delayed_setup_work,
 219                                                 msecs_to_jiffies(2));
 220                 return;
 221         }
 222
 223         result = usb_control_msg(port->serial->dev,
 224                                 usb_rcvctrlpipe(port->serial->dev, 0),
 225                                 OTI6858_REQ_T_GET_STATUS,
 226                                 OTI6858_REQ_GET_STATUS,
 227                                 0, 0,
 228                                 new_setup, OTI6858_CTRL_PKT_SIZE,
 229                                 100);
 230
 231         if (result != OTI6858_CTRL_PKT_SIZE) {
 232                 dev_err(&port->dev, "%s(): error reading status\n", __func__);
 233                 kfree(new_setup);
 234                 /* we will try again */
 235                 schedule_delayed_work(&priv->delayed_setup_work,
 236                                                         msecs_to_jiffies(2));
 237                 return;
 238         }
 239
 240         spin_lock_irqsave(&priv->lock, flags);
 241         if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
 242                 new_setup->divisor = priv->pending_setup.divisor;
 243                 new_setup->control = priv->pending_setup.control;
 244                 new_setup->frame_fmt = priv->pending_setup.frame_fmt;
 245
 246                 spin_unlock_irqrestore(&priv->lock, flags);
 247                 result = usb_control_msg(port->serial->dev,
 248                                         usb_sndctrlpipe(port->serial->dev, 0),
 249                                         OTI6858_REQ_T_SET_LINE,
 250                                         OTI6858_REQ_SET_LINE,
 251                                         0, 0,
 252                                         new_setup, OTI6858_CTRL_PKT_SIZE,
 253                                         100);
 254         } else {
 255                 spin_unlock_irqrestore(&priv->lock, flags);
 256                 result = 0;
 257         }
 258         kfree(new_setup);
 259
 260         spin_lock_irqsave(&priv->lock, flags);
 261         if (result != OTI6858_CTRL_PKT_SIZE)
 262                 priv->transient = 0;
 263         priv->setup_done = 1;
 264         spin_unlock_irqrestore(&priv->lock, flags);
 265
 266         dbg("%s(): submitting interrupt urb", __func__);
 267         port->interrupt_in_urb->dev = port->serial->dev;
 268         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 269         if (result != 0) {
 270                 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 271                                 " with error %d\n", __func__, result);
 272         }
 273 }
 274
 275 static void send_data(struct work_struct *work)
 276 {
 277         struct oti6858_private *priv = container_of(work,
 278                         struct oti6858_private, delayed_write_work.work);
 279         struct usb_serial_port *port = priv->port;
 280         int count = 0, result;
 281         unsigned long flags;
 282         u8 *allow;
 283
 284         dbg("%s(port = %d)", __func__, port->number);
 285
 286         spin_lock_irqsave(&priv->lock, flags);
 287         if (priv->flags.write_urb_in_use) {
 288                 spin_unlock_irqrestore(&priv->lock, flags);
 289                 schedule_delayed_work(&priv->delayed_write_work,
 290                                                 msecs_to_jiffies(2));
 291                 return;
 292         }
 293         priv->flags.write_urb_in_use = 1;
 294         spin_unlock_irqrestore(&priv->lock, flags);
 295
 296         spin_lock_irqsave(&port->lock, flags);
 297         count = kfifo_len(&port->write_fifo);
 298         spin_unlock_irqrestore(&port->lock, flags);
 299
 300         if (count > port->bulk_out_size)
 301                 count = port->bulk_out_size;
 302
 303         if (count != 0) {
 304                 allow = kmalloc(1, GFP_KERNEL);
 305                 if (!allow) {
 306                         dev_err(&port->dev, "%s(): kmalloc failed\n",
 307                                         __func__);
 308                         return;
 309                 }
 310                 result = usb_control_msg(port->serial->dev,
 311                                 usb_rcvctrlpipe(port->serial->dev, 0),
 312                                 OTI6858_REQ_T_CHECK_TXBUFF,
 313                                 OTI6858_REQ_CHECK_TXBUFF,
 314                                 count, 0, allow, 1, 100);
 315                 if (result != 1 || *allow != 0)
 316                         count = 0;
 317                 kfree(allow);
 318         }
 319
 320         if (count == 0) {
 321                 priv->flags.write_urb_in_use = 0;
 322
 323                 dbg("%s(): submitting interrupt urb", __func__);
 324                 port->interrupt_in_urb->dev = port->serial->dev;
 325                 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 326                 if (result != 0) {
 327                         dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 328                                 " with error %d\n", __func__, result);
 329                 }
 330                 return;
 331         }
 332
 333         count = kfifo_out_locked(&port->write_fifo,
 334                                         port->write_urb->transfer_buffer,
 335                                         count, &port->lock);
 336         port->write_urb->transfer_buffer_length = count;
 337         port->write_urb->dev = port->serial->dev;
 338         result = usb_submit_urb(port->write_urb, GFP_NOIO);
 339         if (result != 0) {
 340                 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 341                                " with error %d\n", __func__, result);
 342                 priv->flags.write_urb_in_use = 0;
 343         }
 344
 345         usb_serial_port_softint(port);
 346 }
 347
 348 static int oti6858_startup(struct usb_serial *serial)
 349 {
 350         struct usb_serial_port *port = serial->port[0];
 351         struct oti6858_private *priv;
 352         int i;
 353
 354         for (i = 0; i < serial->num_ports; ++i) {
 355                 priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
 356                 if (!priv)
 357                         break;
 358
 359                 spin_lock_init(&priv->lock);
 360                 init_waitqueue_head(&priv->intr_wait);
 361 /*              INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
 362 /*              INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
 363                 priv->port = port;
 364                 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
 365                 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
 366
 367                 usb_set_serial_port_data(serial->port[i], priv);
 368         }
 369         if (i == serial->num_ports)
 370                 return 0;
 371
 372         for (--i; i >= 0; --i) {
 373                 priv = usb_get_serial_port_data(serial->port[i]);
 374                 kfree(priv);
 375                 usb_set_serial_port_data(serial->port[i], NULL);
 376         }
 377         return -ENOMEM;
 378 }
 379
 380 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 381                         const unsigned char *buf, int count)
 382 {
 383         dbg("%s(port = %d, count = %d)", __func__, port->number, count);
 384
 385         if (!count)
 386                 return count;
 387
 388         count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 389
 390         return count;
 391 }
 392
 393 static int oti6858_write_room(struct tty_struct *tty)
 394 {
 395         struct usb_serial_port *port = tty->driver_data;
 396         int room = 0;
 397         unsigned long flags;
 398
 399         dbg("%s(port = %d)", __func__, port->number);
 400
 401         spin_lock_irqsave(&port->lock, flags);
 402         room = kfifo_avail(&port->write_fifo);
 403         spin_unlock_irqrestore(&port->lock, flags);
 404
 405         return room;
 406 }
 407
 408 static int oti6858_chars_in_buffer(struct tty_struct *tty)
 409 {
 410         struct usb_serial_port *port = tty->driver_data;
 411         int chars = 0;
 412         unsigned long flags;
 413
 414         dbg("%s(port = %d)", __func__, port->number);
 415
 416         spin_lock_irqsave(&port->lock, flags);
 417         chars = kfifo_len(&port->write_fifo);
 418         spin_unlock_irqrestore(&port->lock, flags);
 419
 420         return chars;
 421 }
 422
 423 static void oti6858_init_termios(struct tty_struct *tty)
 424 {
 425         *(tty->termios) = tty_std_termios;
 426         tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
 427         tty->termios->c_ispeed = 38400;
 428         tty->termios->c_ospeed = 38400;
 429 }
 430
 431 static void oti6858_set_termios(struct tty_struct *tty,
 432                 struct usb_serial_port *port, struct ktermios *old_termios)
 433 {
 434         struct oti6858_private *priv = usb_get_serial_port_data(port);
 435         unsigned long flags;
 436         unsigned int cflag;
 437         u8 frame_fmt, control;
 438         __le16 divisor;
 439         int br;
 440
 441         dbg("%s(port = %d)", __func__, port->number);
 442
 443         if (!tty) {
 444                 dbg("%s(): no tty structures", __func__);
 445                 return;
 446         }
 447
 448         cflag = tty->termios->c_cflag;
 449
 450         spin_lock_irqsave(&priv->lock, flags);
 451         divisor = priv->pending_setup.divisor;
 452         frame_fmt = priv->pending_setup.frame_fmt;
 453         control = priv->pending_setup.control;
 454         spin_unlock_irqrestore(&priv->lock, flags);
 455
 456         frame_fmt &= ~FMT_DATA_BITS_MASK;
 457         switch (cflag & CSIZE) {
 458         case CS5:
 459                 frame_fmt |= FMT_DATA_BITS_5;
 460                 break;
 461         case CS6:
 462                 frame_fmt |= FMT_DATA_BITS_6;
 463                 break;
 464         case CS7:
 465                 frame_fmt |= FMT_DATA_BITS_7;
 466                 break;
 467         default:
 468         case CS8:
 469                 frame_fmt |= FMT_DATA_BITS_8;
 470                 break;
 471         }
 472
 473         /* manufacturer claims that this device can work with baud rates
 474          * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
 475          * guarantee that any other baud rate will work (especially
 476          * the higher ones)
 477          */
 478         br = tty_get_baud_rate(tty);
 479         if (br == 0) {
 480                 divisor = 0;
 481         } else {
 482                 int real_br;
 483                 int new_divisor;
 484                 br = min(br, OTI6858_MAX_BAUD_RATE);
 485
 486                 new_divisor = (96000000 + 8 * br) / (16 * br);
 487                 real_br = 96000000 / (16 * new_divisor);
 488                 divisor = cpu_to_le16(new_divisor);
 489                 tty_encode_baud_rate(tty, real_br, real_br);
 490         }
 491
 492         frame_fmt &= ~FMT_STOP_BITS_MASK;
 493         if ((cflag & CSTOPB) != 0)
 494                 frame_fmt |= FMT_STOP_BITS_2;
 495         else
 496                 frame_fmt |= FMT_STOP_BITS_1;
 497
 498         frame_fmt &= ~FMT_PARITY_MASK;
 499         if ((cflag & PARENB) != 0) {
 500                 if ((cflag & PARODD) != 0)
 501                         frame_fmt |= FMT_PARITY_ODD;
 502                 else
 503                         frame_fmt |= FMT_PARITY_EVEN;
 504         } else {
 505                 frame_fmt |= FMT_PARITY_NONE;
 506         }
 507
 508         control &= ~CONTROL_MASK;
 509         if ((cflag & CRTSCTS) != 0)
 510                 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
 511
 512         /* change control lines if we are switching to or from B0 */
 513         /* FIXME:
 514         spin_lock_irqsave(&priv->lock, flags);
 515         control = priv->line_control;
 516         if ((cflag & CBAUD) == B0)
 517                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 518         else
 519                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 520         if (control != priv->line_control) {
 521                 control = priv->line_control;
 522                 spin_unlock_irqrestore(&priv->lock, flags);
 523                 set_control_lines(serial->dev, control);
 524         } else {
 525                 spin_unlock_irqrestore(&priv->lock, flags);
 526         }
 527         */
 528
 529         spin_lock_irqsave(&priv->lock, flags);
 530         if (divisor != priv->pending_setup.divisor
 531                         || control != priv->pending_setup.control
 532                         || frame_fmt != priv->pending_setup.frame_fmt) {
 533                 priv->pending_setup.divisor = divisor;
 534                 priv->pending_setup.control = control;
 535                 priv->pending_setup.frame_fmt = frame_fmt;
 536         }
 537         spin_unlock_irqrestore(&priv->lock, flags);
 538 }
 539
 540 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 541 {
 542         struct oti6858_private *priv = usb_get_serial_port_data(port);
 543         struct ktermios tmp_termios;
 544         struct usb_serial *serial = port->serial;
 545         struct oti6858_control_pkt *buf;
 546         unsigned long flags;
 547         int result;
 548
 549         dbg("%s(port = %d)", __func__, port->number);
 550
 551         usb_clear_halt(serial->dev, port->write_urb->pipe);
 552         usb_clear_halt(serial->dev, port->read_urb->pipe);
 553
 554         buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 555         if (buf == NULL) {
 556                 dev_err(&port->dev, "%s(): out of memory!\n", __func__);
 557                 return -ENOMEM;
 558         }
 559
 560         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 561                                 OTI6858_REQ_T_GET_STATUS,
 562                                 OTI6858_REQ_GET_STATUS,
 563                                 0, 0,
 564                                 buf, OTI6858_CTRL_PKT_SIZE,
 565                                 100);
 566         if (result != OTI6858_CTRL_PKT_SIZE) {
 567                 /* assume default (after power-on reset) values */
 568                 buf->divisor = cpu_to_le16(0x009c);     /* 38400 bps */
 569                 buf->frame_fmt = 0x03;  /* 8N1 */
 570                 buf->something = 0x43;
 571                 buf->control = 0x4c;    /* DTR, RTS */
 572                 buf->tx_status = 0x00;
 573                 buf->pin_state = 0x5b;  /* RTS, CTS, DSR, DTR, RI, DCD */
 574                 buf->rx_bytes_avail = 0x00;
 575         }
 576
 577         spin_lock_irqsave(&priv->lock, flags);
 578         memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
 579         priv->pending_setup.divisor = buf->divisor;
 580         priv->pending_setup.frame_fmt = buf->frame_fmt;
 581         priv->pending_setup.control = buf->control;
 582         spin_unlock_irqrestore(&priv->lock, flags);
 583         kfree(buf);
 584
 585         dbg("%s(): submitting interrupt urb", __func__);
 586         port->interrupt_in_urb->dev = serial->dev;
 587         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 588         if (result != 0) {
 589                 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 590                                " with error %d\n", __func__, result);
 591                 oti6858_close(port);
 592                 return -EPROTO;
 593         }
 594
 595         /* setup termios */
 596         if (tty)
 597                 oti6858_set_termios(tty, port, &tmp_termios);
 598         port->port.drain_delay = 256;   /* FIXME: check the FIFO length */
 599         return 0;
 600 }
 601
 602 static void oti6858_close(struct usb_serial_port *port)
 603 {
 604         struct oti6858_private *priv = usb_get_serial_port_data(port);
 605         unsigned long flags;
 606
 607         dbg("%s(port = %d)", __func__, port->number);
 608
 609         spin_lock_irqsave(&port->lock, flags);
 610         /* clear out any remaining data in the buffer */
 611         kfifo_reset_out(&port->write_fifo);
 612         spin_unlock_irqrestore(&port->lock, flags);
 613
 614         dbg("%s(): after buf_clear()", __func__);
 615
 616         /* cancel scheduled setup */
 617         cancel_delayed_work_sync(&priv->delayed_setup_work);
 618         cancel_delayed_work_sync(&priv->delayed_write_work);
 619
 620         /* shutdown our urbs */
 621         dbg("%s(): shutting down urbs", __func__);
 622         usb_kill_urb(port->write_urb);
 623         usb_kill_urb(port->read_urb);
 624         usb_kill_urb(port->interrupt_in_urb);
 625 }
 626
 627 static int oti6858_tiocmset(struct tty_struct *tty,
 628                                 unsigned int set, unsigned int clear)
 629 {
 630         struct usb_serial_port *port = tty->driver_data;
 631         struct oti6858_private *priv = usb_get_serial_port_data(port);
 632         unsigned long flags;
 633         u8 control;
 634
 635         dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
 636                                 __func__, port->number, set, clear);
 637
 638         if (!usb_get_intfdata(port->serial->interface))
 639                 return -ENODEV;
 640
 641         /* FIXME: check if this is correct (active high/low) */
 642         spin_lock_irqsave(&priv->lock, flags);
 643         control = priv->pending_setup.control;
 644         if ((set & TIOCM_RTS) != 0)
 645                 control |= CONTROL_RTS_HIGH;
 646         if ((set & TIOCM_DTR) != 0)
 647                 control |= CONTROL_DTR_HIGH;
 648         if ((clear & TIOCM_RTS) != 0)
 649                 control &= ~CONTROL_RTS_HIGH;
 650         if ((clear & TIOCM_DTR) != 0)
 651                 control &= ~CONTROL_DTR_HIGH;
 652
 653         if (control != priv->pending_setup.control)
 654                 priv->pending_setup.control = control;
 655
 656         spin_unlock_irqrestore(&priv->lock, flags);
 657         return 0;
 658 }
 659
 660 static int oti6858_tiocmget(struct tty_struct *tty)
 661 {
 662         struct usb_serial_port *port = tty->driver_data;
 663         struct oti6858_private *priv = usb_get_serial_port_data(port);
 664         unsigned long flags;
 665         unsigned pin_state;
 666         unsigned result = 0;
 667
 668         dbg("%s(port = %d)", __func__, port->number);
 669
 670         if (!usb_get_intfdata(port->serial->interface))
 671                 return -ENODEV;
 672
 673         spin_lock_irqsave(&priv->lock, flags);
 674         pin_state = priv->status.pin_state & PIN_MASK;
 675         spin_unlock_irqrestore(&priv->lock, flags);
 676
 677         /* FIXME: check if this is correct (active high/low) */
 678         if ((pin_state & PIN_RTS) != 0)
 679                 result |= TIOCM_RTS;
 680         if ((pin_state & PIN_CTS) != 0)
 681                 result |= TIOCM_CTS;
 682         if ((pin_state & PIN_DSR) != 0)
 683                 result |= TIOCM_DSR;
 684         if ((pin_state & PIN_DTR) != 0)
 685                 result |= TIOCM_DTR;
 686         if ((pin_state & PIN_RI) != 0)
 687                 result |= TIOCM_RI;
 688         if ((pin_state & PIN_DCD) != 0)
 689                 result |= TIOCM_CD;
 690
 691         dbg("%s() = 0x%08x", __func__, result);
 692
 693         return result;
 694 }
 695
 696 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 697 {
 698         struct oti6858_private *priv = usb_get_serial_port_data(port);
 699         unsigned long flags;
 700         unsigned int prev, status;
 701         unsigned int changed;
 702
 703         spin_lock_irqsave(&priv->lock, flags);
 704         prev = priv->status.pin_state;
 705         spin_unlock_irqrestore(&priv->lock, flags);
 706
 707         while (1) {
 708                 wait_event_interruptible(priv->intr_wait,
 709                                         priv->status.pin_state != prev);
 710                 if (signal_pending(current))
 711                         return -ERESTARTSYS;
 712
 713                 spin_lock_irqsave(&priv->lock, flags);
 714                 status = priv->status.pin_state & PIN_MASK;
 715                 spin_unlock_irqrestore(&priv->lock, flags);
 716
 717                 changed = prev ^ status;
 718                 /* FIXME: check if this is correct (active high/low) */
 719                 if (((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
 720                     ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
 721                     ((arg & TIOCM_CD)  && (changed & PIN_DCD)) ||
 722                     ((arg & TIOCM_CTS) && (changed & PIN_CTS)))
 723                         return 0;
 724                 prev = status;
 725         }
 726
 727         /* NOTREACHED */
 728         return 0;
 729 }
 730
 731 static int oti6858_ioctl(struct tty_struct *tty,
 732                         unsigned int cmd, unsigned long arg)
 733 {
 734         struct usb_serial_port *port = tty->driver_data;
 735
 736         dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
 737                                 __func__, port->number, cmd, arg);
 738
 739         switch (cmd) {
 740         case TIOCMIWAIT:
 741                 dbg("%s(): TIOCMIWAIT", __func__);
 742                 return wait_modem_info(port, arg);
 743         default:
 744                 dbg("%s(): 0x%04x not supported", __func__, cmd);
 745                 break;
 746         }
 747         return -ENOIOCTLCMD;
 748 }
 749
 750
 751 static void oti6858_release(struct usb_serial *serial)
 752 {
 753         int i;
 754
 755         dbg("%s()", __func__);
 756
 757         for (i = 0; i < serial->num_ports; ++i)
 758                 kfree(usb_get_serial_port_data(serial->port[i]));
 759 }
 760
 761 static void oti6858_read_int_callback(struct urb *urb)
 762 {
 763         struct usb_serial_port *port =  urb->context;
 764         struct oti6858_private *priv = usb_get_serial_port_data(port);
 765         int transient = 0, can_recv = 0, resubmit = 1;
 766         int status = urb->status;
 767
 768         dbg("%s(port = %d, status = %d)",
 769                                 __func__, port->number, status);
 770
 771         switch (status) {
 772         case 0:
 773                 /* success */
 774                 break;
 775         case -ECONNRESET:
 776         case -ENOENT:
 777         case -ESHUTDOWN:
 778                 /* this urb is terminated, clean up */
 779                 dbg("%s(): urb shutting down with status: %d",
 780                                         __func__, status);
 781                 return;
 782         default:
 783                 dbg("%s(): nonzero urb status received: %d",
 784                                         __func__, status);
 785                 break;
 786         }
 787
 788         if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
 789                 struct oti6858_control_pkt *xs = urb->transfer_buffer;
 790                 unsigned long flags;
 791
 792                 spin_lock_irqsave(&priv->lock, flags);
 793
 794                 if (!priv->transient) {
 795                         if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
 796                                 if (xs->rx_bytes_avail == 0) {
 797                                         priv->transient = 4;
 798                                         priv->setup_done = 0;
 799                                         resubmit = 0;
 800                                         dbg("%s(): scheduling setup_line()",
 801                                             __func__);
 802                                         schedule_delayed_work(&priv->delayed_setup_work, 0);
 803                                 }
 804                         }
 805                 } else {
 806                         if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
 807                                 priv->transient = 0;
 808                         } else if (!priv->setup_done) {
 809                                 resubmit = 0;
 810                         } else if (--priv->transient == 0) {
 811                                 if (xs->rx_bytes_avail == 0) {
 812                                         priv->transient = 4;
 813                                         priv->setup_done = 0;
 814                                         resubmit = 0;
 815                                         dbg("%s(): scheduling setup_line()",
 816                                             __func__);
 817                                         schedule_delayed_work(&priv->delayed_setup_work, 0);
 818                                 }
 819                         }
 820                 }
 821
 822                 if (!priv->transient) {
 823                         if (xs->pin_state != priv->status.pin_state)
 824                                 wake_up_interruptible(&priv->intr_wait);
 825                         memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
 826                 }
 827
 828                 if (!priv->transient && xs->rx_bytes_avail != 0) {
 829                         can_recv = xs->rx_bytes_avail;
 830                         priv->flags.read_urb_in_use = 1;
 831                 }
 832
 833                 transient = priv->transient;
 834                 spin_unlock_irqrestore(&priv->lock, flags);
 835         }
 836
 837         if (can_recv) {
 838                 int result;
 839
 840                 port->read_urb->dev = port->serial->dev;
 841                 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 842                 if (result != 0) {
 843                         priv->flags.read_urb_in_use = 0;
 844                         dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 845                                         " error %d\n", __func__, result);
 846                 } else {
 847                         resubmit = 0;
 848                 }
 849         } else if (!transient) {
 850                 unsigned long flags;
 851                 int count;
 852
 853                 spin_lock_irqsave(&port->lock, flags);
 854                 count = kfifo_len(&port->write_fifo);
 855                 spin_unlock_irqrestore(&port->lock, flags);
 856
 857                 spin_lock_irqsave(&priv->lock, flags);
 858                 if (priv->flags.write_urb_in_use == 0 && count != 0) {
 859                         schedule_delayed_work(&priv->delayed_write_work, 0);
 860                         resubmit = 0;
 861                 }
 862                 spin_unlock_irqrestore(&priv->lock, flags);
 863         }
 864
 865         if (resubmit) {
 866                 int result;
 867
 868 /*              dbg("%s(): submitting interrupt urb", __func__); */
 869                 urb->dev = port->serial->dev;
 870                 result = usb_submit_urb(urb, GFP_ATOMIC);
 871                 if (result != 0) {
 872                         dev_err(&urb->dev->dev,
 873                                         "%s(): usb_submit_urb() failed with"
 874                                         " error %d\n", __func__, result);
 875                 }
 876         }
 877 }
 878
 879 static void oti6858_read_bulk_callback(struct urb *urb)
 880 {
 881         struct usb_serial_port *port =  urb->context;
 882         struct oti6858_private *priv = usb_get_serial_port_data(port);
 883         struct tty_struct *tty;
 884         unsigned char *data = urb->transfer_buffer;
 885         unsigned long flags;
 886         int status = urb->status;
 887         int result;
 888
 889         dbg("%s(port = %d, status = %d)",
 890                                 __func__, port->number, status);
 891
 892         spin_lock_irqsave(&priv->lock, flags);
 893         priv->flags.read_urb_in_use = 0;
 894         spin_unlock_irqrestore(&priv->lock, flags);
 895
 896         if (status != 0) {
 897                 /*
 898                 if (status == -EPROTO) {
 899                         * PL2303 mysteriously fails with -EPROTO reschedule
 900                            the read *
 901                         dbg("%s - caught -EPROTO, resubmitting the urb",
 902                                                                 __func__);
 903                         result = usb_submit_urb(urb, GFP_ATOMIC);
 904                         if (result)
 905                                 dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
 906                         return;
 907                 }
 908                 */
 909                 dbg("%s(): unable to handle the error, exiting", __func__);
 910                 return;
 911         }
 912
 913         tty = tty_port_tty_get(&port->port);
 914         if (tty != NULL && urb->actual_length > 0) {
 915                 tty_insert_flip_string(tty, data, urb->actual_length);
 916                 tty_flip_buffer_push(tty);
 917         }
 918         tty_kref_put(tty);
 919
 920         /* schedule the interrupt urb */
 921         port->interrupt_in_urb->dev = port->serial->dev;
 922         result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 923         if (result != 0 && result != -EPERM) {
 924                 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 925                                 " error %d\n", __func__, result);
 926         }
 927 }
 928
 929 static void oti6858_write_bulk_callback(struct urb *urb)
 930 {
 931         struct usb_serial_port *port =  urb->context;
 932         struct oti6858_private *priv = usb_get_serial_port_data(port);
 933         int status = urb->status;
 934         int result;
 935
 936         dbg("%s(port = %d, status = %d)",
 937                                 __func__, port->number, status);
 938
 939         switch (status) {
 940         case 0:
 941                 /* success */
 942                 break;
 943         case -ECONNRESET:
 944         case -ENOENT:
 945         case -ESHUTDOWN:
 946                 /* this urb is terminated, clean up */
 947                 dbg("%s(): urb shutting down with status: %d",
 948                                         __func__, status);
 949                 priv->flags.write_urb_in_use = 0;
 950                 return;
 951         default:
 952                 /* error in the urb, so we have to resubmit it */
 953                 dbg("%s(): nonzero write bulk status received: %d",
 954                                         __func__, status);
 955                 dbg("%s(): overflow in write", __func__);
 956
 957                 port->write_urb->transfer_buffer_length = 1;
 958                 port->write_urb->dev = port->serial->dev;
 959                 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 960                 if (result) {
 961                         dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 962                                         " error %d\n", __func__, result);
 963                 } else {
 964                         return;
 965                 }
 966         }
 967
 968         priv->flags.write_urb_in_use = 0;
 969
 970         /* schedule the interrupt urb if we are still open */
 971         port->interrupt_in_urb->dev = port->serial->dev;
 972         dbg("%s(): submitting interrupt urb", __func__);
 973         result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 974         if (result != 0) {
 975                 dev_err(&port->dev, "%s(): failed submitting int urb,"
 976                                         " error %d\n", __func__, result);
 977         }
 978 }
 979
 980 /* module description and (de)initialization */
 981
 982 static int __init oti6858_init(void)
 983 {
 984         int retval;
 985
 986         retval = usb_serial_register(&oti6858_device);
 987         if (retval == 0) {
 988                 retval = usb_register(&oti6858_driver);
 989                 if (retval)
 990                         usb_serial_deregister(&oti6858_device);
 991         }
 992         return retval;
 993 }
 994
 995 static void __exit oti6858_exit(void)
 996 {
 997         usb_deregister(&oti6858_driver);
 998         usb_serial_deregister(&oti6858_device);
 999 }
1000
1001 module_init(oti6858_init);
1002 module_exit(oti6858_exit);
1003
1004 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
1005 MODULE_AUTHOR(OTI6858_AUTHOR);
1006 MODULE_VERSION(OTI6858_VERSION);
1007 MODULE_LICENSE("GPL");
1008
1009 module_param(debug, bool, S_IRUGO | S_IWUSR);
1010 MODULE_PARM_DESC(debug, "enable debug output");
1011