drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this
  15  * driver
  16  *
  17  * See http://geocities.com/i0xox0i for information on this driver and the
  18  * earthmate usb device.
  19  *
  20  *  Lonnie Mendez <dignome@gmail.com>
  21  *  4-29-2005
  22  *      Fixed problem where setting or retreiving the serial config would fail
  23  *      with EPIPE.  Removed CRTS toggling so the driver behaves more like
  24  *      other usbserial adapters.  Issued new interval of 1ms instead of the
  25  *      default 10ms.  As a result, transfer speed has been substantially
  26  *      increased from avg. 850bps to avg. 3300bps.  initial termios has also
  27  *      been modified.  Cleaned up code and formatting issues so it is more
  28  *      readable.  Replaced the C++ style comments.
  29  *
  30  *  Lonnie Mendez <dignome@gmail.com>
  31  *  12-15-2004
  32  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  33  *      handling so both lines are raised in cypress_open. (was dropping rts)
  34  *      Various code cleanups made as well along with other misc bug fixes.
  35  *
  36  *  Lonnie Mendez <dignome@gmail.com>
  37  *  04-10-2004
  38  *      Driver modified to support dynamic line settings.  Various improvments
  39  *      and features.
  40  *
  41  *  Neil Whelchel
  42  *  10-2003
  43  *      Driver first released.
  44  *
  45  */
  46
  47 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
  48    for linux. */
  49 /* Thanks to cypress for providing references for the hid reports. */
  50 /* Thanks to Jiang Zhang for providing links and for general help. */
  51 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
  52
  53
  54 #include <linux/kernel.h>
  55 #include <linux/errno.h>
  56 #include <linux/init.h>
  57 #include <linux/slab.h>
  58 #include <linux/tty.h>
  59 #include <linux/tty_driver.h>
  60 #include <linux/tty_flip.h>
  61 #include <linux/module.h>
  62 #include <linux/moduleparam.h>
  63 #include <linux/spinlock.h>
  64 #include <linux/usb.h>
  65 #include <linux/usb/serial.h>
  66 #include <linux/serial.h>
  67 #include <linux/delay.h>
  68 #include <linux/uaccess.h>
  69
  70 #include "cypress_m8.h"
  71
  72
  73 #ifdef CONFIG_USB_SERIAL_DEBUG
  74         static int debug = 1;
  75 #else
  76         static int debug;
  77 #endif
  78 static int stats;
  79 static int interval;
  80
  81 /*
  82  * Version Information
  83  */
  84 #define DRIVER_VERSION "v1.09"
  85 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  86 #define DRIVER_DESC "Cypress USB to Serial Driver"
  87
  88 /* write buffer size defines */
  89 #define CYPRESS_BUF_SIZE        1024
  90 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  91
  92 static struct usb_device_id id_table_earthmate [] = {
  93         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  94         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  95         { }                                             /* Terminating entry */
  96 };
  97
  98 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  99         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 100         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 101         { }                                             /* Terminating entry */
 102 };
 103
 104 static struct usb_device_id id_table_nokiaca42v2 [] = {
 105         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 106         { }                                             /* Terminating entry */
 107 };
 108
 109 static struct usb_device_id id_table_combined [] = {
 110         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 111         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 112         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 113         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 114         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 115         { }                                             /* Terminating entry */
 116 };
 117
 118 MODULE_DEVICE_TABLE(usb, id_table_combined);
 119
 120 static struct usb_driver cypress_driver = {
 121         .name =         "cypress",
 122         .probe =        usb_serial_probe,
 123         .disconnect =   usb_serial_disconnect,
 124         .id_table =     id_table_combined,
 125         .no_dynamic_id =        1,
 126 };
 127
 128 enum packet_format {
 129         packet_format_1,  /* b0:status, b1:payload count */
 130         packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
 131 };
 132
 133 struct cypress_private {
 134         spinlock_t lock;                   /* private lock */
 135         int chiptype;                      /* identifier of device, for quirks/etc */
 136         int bytes_in;                      /* used for statistics */
 137         int bytes_out;                     /* used for statistics */
 138         int cmd_count;                     /* used for statistics */
 139         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 140         struct cypress_buf *buf;           /* write buffer */
 141         int write_urb_in_use;              /* write urb in use indicator */
 142         int write_urb_interval;            /* interval to use for write urb */
 143         int read_urb_interval;             /* interval to use for read urb */
 144         int comm_is_ok;                    /* true if communication is (still) ok */
 145         int termios_initialized;
 146         __u8 line_control;                 /* holds dtr / rts value */
 147         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 148         __u8 current_config;               /* stores the current configuration byte */
 149         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 150         enum packet_format pkt_fmt;        /* format to use for packet send / receive */
 151         int get_cfg_unsafe;                /* If true, the CYPRESS_GET_CONFIG is unsafe */
 152         int baud_rate;                     /* stores current baud rate in
 153                                               integer form */
 154         int isthrottled;                   /* if throttled, discard reads */
 155         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 156         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 157         /* we pass a pointer to this as the arguement sent to
 158            cypress_set_termios old_termios */
 159         struct ktermios tmp_termios;       /* stores the old termios settings */
 160 };
 161
 162 /* write buffer structure */
 163 struct cypress_buf {
 164         unsigned int    buf_size;
 165         char            *buf_buf;
 166         char            *buf_get;
 167         char            *buf_put;
 168 };
 169
 170 /* function prototypes for the Cypress USB to serial device */
 171 static int  cypress_earthmate_startup(struct usb_serial *serial);
 172 static int  cypress_hidcom_startup(struct usb_serial *serial);
 173 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 174 static void cypress_release(struct usb_serial *serial);
 175 static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 176 static void cypress_close(struct usb_serial_port *port);
 177 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 178 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 179                         const unsigned char *buf, int count);
 180 static void cypress_send(struct usb_serial_port *port);
 181 static int  cypress_write_room(struct tty_struct *tty);
 182 static int  cypress_ioctl(struct tty_struct *tty, struct file *file,
 183                         unsigned int cmd, unsigned long arg);
 184 static void cypress_set_termios(struct tty_struct *tty,
 185                         struct usb_serial_port *port, struct ktermios *old);
 186 static int  cypress_tiocmget(struct tty_struct *tty, struct file *file);
 187 static int  cypress_tiocmset(struct tty_struct *tty, struct file *file,
 188                         unsigned int set, unsigned int clear);
 189 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 190 static void cypress_throttle(struct tty_struct *tty);
 191 static void cypress_unthrottle(struct tty_struct *tty);
 192 static void cypress_set_dead(struct usb_serial_port *port);
 193 static void cypress_read_int_callback(struct urb *urb);
 194 static void cypress_write_int_callback(struct urb *urb);
 195 /* write buffer functions */
 196 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 197 static void cypress_buf_free(struct cypress_buf *cb);
 198 static void cypress_buf_clear(struct cypress_buf *cb);
 199 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
 200 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
 201 static unsigned int cypress_buf_put(struct cypress_buf *cb,
 202                                         const char *buf, unsigned int count);
 203 static unsigned int cypress_buf_get(struct cypress_buf *cb,
 204                                         char *buf, unsigned int count);
 205
 206
 207 static struct usb_serial_driver cypress_earthmate_device = {
 208         .driver = {
 209                 .owner =                THIS_MODULE,
 210                 .name =                 "earthmate",
 211         },
 212         .description =                  "DeLorme Earthmate USB",
 213         .usb_driver =                   &cypress_driver,
 214         .id_table =                     id_table_earthmate,
 215         .num_ports =                    1,
 216         .attach =                       cypress_earthmate_startup,
 217         .release =                      cypress_release,
 218         .open =                         cypress_open,
 219         .close =                        cypress_close,
 220         .dtr_rts =                      cypress_dtr_rts,
 221         .write =                        cypress_write,
 222         .write_room =                   cypress_write_room,
 223         .ioctl =                        cypress_ioctl,
 224         .set_termios =                  cypress_set_termios,
 225         .tiocmget =                     cypress_tiocmget,
 226         .tiocmset =                     cypress_tiocmset,
 227         .chars_in_buffer =              cypress_chars_in_buffer,
 228         .throttle =                     cypress_throttle,
 229         .unthrottle =                   cypress_unthrottle,
 230         .read_int_callback =            cypress_read_int_callback,
 231         .write_int_callback =           cypress_write_int_callback,
 232 };
 233
 234 static struct usb_serial_driver cypress_hidcom_device = {
 235         .driver = {
 236                 .owner =                THIS_MODULE,
 237                 .name =                 "cyphidcom",
 238         },
 239         .description =                  "HID->COM RS232 Adapter",
 240         .usb_driver =                   &cypress_driver,
 241         .id_table =                     id_table_cyphidcomrs232,
 242         .num_ports =                    1,
 243         .attach =                       cypress_hidcom_startup,
 244         .release =                      cypress_release,
 245         .open =                         cypress_open,
 246         .close =                        cypress_close,
 247         .dtr_rts =                      cypress_dtr_rts,
 248         .write =                        cypress_write,
 249         .write_room =                   cypress_write_room,
 250         .ioctl =                        cypress_ioctl,
 251         .set_termios =                  cypress_set_termios,
 252         .tiocmget =                     cypress_tiocmget,
 253         .tiocmset =                     cypress_tiocmset,
 254         .chars_in_buffer =              cypress_chars_in_buffer,
 255         .throttle =                     cypress_throttle,
 256         .unthrottle =                   cypress_unthrottle,
 257         .read_int_callback =            cypress_read_int_callback,
 258         .write_int_callback =           cypress_write_int_callback,
 259 };
 260
 261 static struct usb_serial_driver cypress_ca42v2_device = {
 262         .driver = {
 263                 .owner =                THIS_MODULE,
 264                 .name =                 "nokiaca42v2",
 265         },
 266         .description =                  "Nokia CA-42 V2 Adapter",
 267         .usb_driver =                   &cypress_driver,
 268         .id_table =                     id_table_nokiaca42v2,
 269         .num_ports =                    1,
 270         .attach =                       cypress_ca42v2_startup,
 271         .release =                      cypress_release,
 272         .open =                         cypress_open,
 273         .close =                        cypress_close,
 274         .dtr_rts =                      cypress_dtr_rts,
 275         .write =                        cypress_write,
 276         .write_room =                   cypress_write_room,
 277         .ioctl =                        cypress_ioctl,
 278         .set_termios =                  cypress_set_termios,
 279         .tiocmget =                     cypress_tiocmget,
 280         .tiocmset =                     cypress_tiocmset,
 281         .chars_in_buffer =              cypress_chars_in_buffer,
 282         .throttle =                     cypress_throttle,
 283         .unthrottle =                   cypress_unthrottle,
 284         .read_int_callback =            cypress_read_int_callback,
 285         .write_int_callback =           cypress_write_int_callback,
 286 };
 287
 288 /*****************************************************************************
 289  * Cypress serial helper functions
 290  *****************************************************************************/
 291
 292
 293 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 294 {
 295         struct cypress_private *priv;
 296         priv = usb_get_serial_port_data(port);
 297
 298         /*
 299          * The general purpose firmware for the Cypress M8 allows for
 300          * a maximum speed of 57600bps (I have no idea whether DeLorme
 301          * chose to use the general purpose firmware or not), if you
 302          * need to modify this speed setting for your own project
 303          * please add your own chiptype and modify the code likewise.
 304          * The Cypress HID->COM device will work successfully up to
 305          * 115200bps (but the actual throughput is around 3kBps).
 306          */
 307         if (port->serial->dev->speed == USB_SPEED_LOW) {
 308                 /*
 309                  * Mike Isely <isely@pobox.com> 2-Feb-2008: The
 310                  * Cypress app note that describes this mechanism
 311                  * states the the low-speed part can't handle more
 312                  * than 800 bytes/sec, in which case 4800 baud is the
 313                  * safest speed for a part like that.
 314                  */
 315                 if (new_rate > 4800) {
 316                         dbg("%s - failed setting baud rate, device incapable "
 317                             "speed %d", __func__, new_rate);
 318                         return -1;
 319                 }
 320         }
 321         switch (priv->chiptype) {
 322         case CT_EARTHMATE:
 323                 if (new_rate <= 600) {
 324                         /* 300 and 600 baud rates are supported under
 325                          * the generic firmware, but are not used with
 326                          * NMEA and SiRF protocols */
 327                         dbg("%s - failed setting baud rate, unsupported speed "
 328                             "of %d on Earthmate GPS", __func__, new_rate);
 329                         return -1;
 330                 }
 331                 break;
 332         default:
 333                 break;
 334         }
 335         return new_rate;
 336 }
 337
 338
 339 /* This function can either set or retrieve the current serial line settings */
 340 static int cypress_serial_control(struct tty_struct *tty,
 341         struct usb_serial_port *port, speed_t baud_rate, int data_bits,
 342         int stop_bits, int parity_enable, int parity_type, int reset,
 343         int cypress_request_type)
 344 {
 345         int new_baudrate = 0, retval = 0, tries = 0;
 346         struct cypress_private *priv;
 347         __u8 feature_buffer[5];
 348         unsigned long flags;
 349
 350         dbg("%s", __func__);
 351
 352         priv = usb_get_serial_port_data(port);
 353
 354         if (!priv->comm_is_ok)
 355                 return -ENODEV;
 356
 357         switch (cypress_request_type) {
 358         case CYPRESS_SET_CONFIG:
 359                 new_baudrate = priv->baud_rate;
 360                 /* 0 means 'Hang up' so doesn't change the true bit rate */
 361                 if (baud_rate == 0)
 362                         new_baudrate = priv->baud_rate;
 363                 /* Change of speed ? */
 364                 else if (baud_rate != priv->baud_rate) {
 365                         dbg("%s - baud rate is changing", __func__);
 366                         retval = analyze_baud_rate(port, baud_rate);
 367                         if (retval >=  0) {
 368                                 new_baudrate = retval;
 369                                 dbg("%s - New baud rate set to %d",
 370                                     __func__, new_baudrate);
 371                         }
 372                 }
 373                 dbg("%s - baud rate is being sent as %d",
 374                                         __func__, new_baudrate);
 375
 376                 memset(feature_buffer, 0, sizeof(feature_buffer));
 377                 /* fill the feature_buffer with new configuration */
 378                 *((u_int32_t *)feature_buffer) = new_baudrate;
 379                 feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 380                 /* 1 bit gap */
 381                 feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 382                 feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 383                 feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 384                 /* 1 bit gap */
 385                 feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 386
 387                 dbg("%s - device is being sent this feature report:",
 388                                                                 __func__);
 389                 dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
 390                         feature_buffer[0], feature_buffer[1],
 391                         feature_buffer[2], feature_buffer[3],
 392                         feature_buffer[4]);
 393
 394                 do {
 395                         retval = usb_control_msg(port->serial->dev,
 396                                         usb_sndctrlpipe(port->serial->dev, 0),
 397                                         HID_REQ_SET_REPORT,
 398                                         USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 399                                         0x0300, 0, feature_buffer,
 400                                         sizeof(feature_buffer), 500);
 401
 402                         if (tries++ >= 3)
 403                                 break;
 404
 405                 } while (retval != sizeof(feature_buffer) &&
 406                          retval != -ENODEV);
 407
 408                 if (retval != sizeof(feature_buffer)) {
 409                         dev_err(&port->dev, "%s - failed sending serial "
 410                                 "line settings - %d\n", __func__, retval);
 411                         cypress_set_dead(port);
 412                 } else {
 413                         spin_lock_irqsave(&priv->lock, flags);
 414                         priv->baud_rate = new_baudrate;
 415                         priv->current_config = feature_buffer[4];
 416                         spin_unlock_irqrestore(&priv->lock, flags);
 417                         /* If we asked for a speed change encode it */
 418                         if (baud_rate)
 419                                 tty_encode_baud_rate(tty,
 420                                         new_baudrate, new_baudrate);
 421                 }
 422         break;
 423         case CYPRESS_GET_CONFIG:
 424                 if (priv->get_cfg_unsafe) {
 425                         /* Not implemented for this device,
 426                            and if we try to do it we're likely
 427                            to crash the hardware. */
 428                         return -ENOTTY;
 429                 }
 430                 dbg("%s - retreiving serial line settings", __func__);
 431                 /* set initial values in feature buffer */
 432                 memset(feature_buffer, 0, sizeof(feature_buffer));
 433
 434                 do {
 435                         retval = usb_control_msg(port->serial->dev,
 436                                         usb_rcvctrlpipe(port->serial->dev, 0),
 437                                         HID_REQ_GET_REPORT,
 438                                         USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 439                                         0x0300, 0, feature_buffer,
 440                                         sizeof(feature_buffer), 500);
 441
 442                         if (tries++ >= 3)
 443                                 break;
 444                 } while (retval != sizeof(feature_buffer)
 445                                                 && retval != -ENODEV);
 446
 447                 if (retval != sizeof(feature_buffer)) {
 448                         dev_err(&port->dev, "%s - failed to retrieve serial "
 449                                 "line settings - %d\n", __func__, retval);
 450                         cypress_set_dead(port);
 451                         return retval;
 452                 } else {
 453                         spin_lock_irqsave(&priv->lock, flags);
 454                         /* store the config in one byte, and later
 455                            use bit masks to check values */
 456                         priv->current_config = feature_buffer[4];
 457                         priv->baud_rate = *((u_int32_t *)feature_buffer);
 458                         spin_unlock_irqrestore(&priv->lock, flags);
 459                 }
 460         }
 461         spin_lock_irqsave(&priv->lock, flags);
 462         ++priv->cmd_count;
 463         spin_unlock_irqrestore(&priv->lock, flags);
 464
 465         return retval;
 466 } /* cypress_serial_control */
 467
 468
 469 static void cypress_set_dead(struct usb_serial_port *port)
 470 {
 471         struct cypress_private *priv = usb_get_serial_port_data(port);
 472         unsigned long flags;
 473
 474         spin_lock_irqsave(&priv->lock, flags);
 475         if (!priv->comm_is_ok) {
 476                 spin_unlock_irqrestore(&priv->lock, flags);
 477                 return;
 478         }
 479         priv->comm_is_ok = 0;
 480         spin_unlock_irqrestore(&priv->lock, flags);
 481
 482         dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
 483                 "interval might be too short\n", port->number);
 484 }
 485
 486
 487 /*****************************************************************************
 488  * Cypress serial driver functions
 489  *****************************************************************************/
 490
 491
 492 static int generic_startup(struct usb_serial *serial)
 493 {
 494         struct cypress_private *priv;
 495         struct usb_serial_port *port = serial->port[0];
 496
 497         dbg("%s - port %d", __func__, port->number);
 498
 499         priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 500         if (!priv)
 501                 return -ENOMEM;
 502
 503         priv->comm_is_ok = !0;
 504         spin_lock_init(&priv->lock);
 505         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 506         if (priv->buf == NULL) {
 507                 kfree(priv);
 508                 return -ENOMEM;
 509         }
 510         init_waitqueue_head(&priv->delta_msr_wait);
 511
 512         usb_reset_configuration(serial->dev);
 513
 514         priv->cmd_ctrl = 0;
 515         priv->line_control = 0;
 516         priv->termios_initialized = 0;
 517         priv->rx_flags = 0;
 518         /* Default packet format setting is determined by packet size.
 519            Anything with a size larger then 9 must have a separate
 520            count field since the 3 bit count field is otherwise too
 521            small.  Otherwise we can use the slightly more compact
 522            format.  This is in accordance with the cypress_m8 serial
 523            converter app note. */
 524         if (port->interrupt_out_size > 9)
 525                 priv->pkt_fmt = packet_format_1;
 526         else
 527                 priv->pkt_fmt = packet_format_2;
 528
 529         if (interval > 0) {
 530                 priv->write_urb_interval = interval;
 531                 priv->read_urb_interval = interval;
 532                 dbg("%s - port %d read & write intervals forced to %d",
 533                     __func__, port->number, interval);
 534         } else {
 535                 priv->write_urb_interval = port->interrupt_out_urb->interval;
 536                 priv->read_urb_interval = port->interrupt_in_urb->interval;
 537                 dbg("%s - port %d intervals: read=%d write=%d",
 538                     __func__, port->number,
 539                     priv->read_urb_interval, priv->write_urb_interval);
 540         }
 541         usb_set_serial_port_data(port, priv);
 542
 543         return 0;
 544 }
 545
 546
 547 static int cypress_earthmate_startup(struct usb_serial *serial)
 548 {
 549         struct cypress_private *priv;
 550         struct usb_serial_port *port = serial->port[0];
 551
 552         dbg("%s", __func__);
 553
 554         if (generic_startup(serial)) {
 555                 dbg("%s - Failed setting up port %d", __func__,
 556                                 port->number);
 557                 return 1;
 558         }
 559
 560         priv = usb_get_serial_port_data(port);
 561         priv->chiptype = CT_EARTHMATE;
 562         /* All Earthmate devices use the separated-count packet
 563            format!  Idiotic. */
 564         priv->pkt_fmt = packet_format_1;
 565         if (serial->dev->descriptor.idProduct !=
 566                                 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
 567                 /* The old original USB Earthmate seemed able to
 568                    handle GET_CONFIG requests; everything they've
 569                    produced since that time crashes if this command is
 570                    attempted :-( */
 571                 dbg("%s - Marking this device as unsafe for GET_CONFIG "
 572                     "commands", __func__);
 573                 priv->get_cfg_unsafe = !0;
 574         }
 575
 576         return 0;
 577 } /* cypress_earthmate_startup */
 578
 579
 580 static int cypress_hidcom_startup(struct usb_serial *serial)
 581 {
 582         struct cypress_private *priv;
 583
 584         dbg("%s", __func__);
 585
 586         if (generic_startup(serial)) {
 587                 dbg("%s - Failed setting up port %d", __func__,
 588                                 serial->port[0]->number);
 589                 return 1;
 590         }
 591
 592         priv = usb_get_serial_port_data(serial->port[0]);
 593         priv->chiptype = CT_CYPHIDCOM;
 594
 595         return 0;
 596 } /* cypress_hidcom_startup */
 597
 598
 599 static int cypress_ca42v2_startup(struct usb_serial *serial)
 600 {
 601         struct cypress_private *priv;
 602
 603         dbg("%s", __func__);
 604
 605         if (generic_startup(serial)) {
 606                 dbg("%s - Failed setting up port %d", __func__,
 607                                 serial->port[0]->number);
 608                 return 1;
 609         }
 610
 611         priv = usb_get_serial_port_data(serial->port[0]);
 612         priv->chiptype = CT_CA42V2;
 613
 614         return 0;
 615 } /* cypress_ca42v2_startup */
 616
 617
 618 static void cypress_release(struct usb_serial *serial)
 619 {
 620         struct cypress_private *priv;
 621
 622         dbg("%s - port %d", __func__, serial->port[0]->number);
 623
 624         /* all open ports are closed at this point */
 625
 626         priv = usb_get_serial_port_data(serial->port[0]);
 627
 628         if (priv) {
 629                 cypress_buf_free(priv->buf);
 630                 kfree(priv);
 631         }
 632 }
 633
 634
 635 static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 636 {
 637         struct cypress_private *priv = usb_get_serial_port_data(port);
 638         struct usb_serial *serial = port->serial;
 639         unsigned long flags;
 640         int result = 0;
 641
 642         dbg("%s - port %d", __func__, port->number);
 643
 644         if (!priv->comm_is_ok)
 645                 return -EIO;
 646
 647         /* clear halts before open */
 648         usb_clear_halt(serial->dev, 0x81);
 649         usb_clear_halt(serial->dev, 0x02);
 650
 651         spin_lock_irqsave(&priv->lock, flags);
 652         /* reset read/write statistics */
 653         priv->bytes_in = 0;
 654         priv->bytes_out = 0;
 655         priv->cmd_count = 0;
 656         priv->rx_flags = 0;
 657         spin_unlock_irqrestore(&priv->lock, flags);
 658
 659         /* Set termios */
 660         cypress_send(port);
 661
 662         if (tty)
 663                 cypress_set_termios(tty, port, &priv->tmp_termios);
 664
 665         /* setup the port and start reading from the device */
 666         if (!port->interrupt_in_urb) {
 667                 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
 668                         __func__);
 669                 return -1;
 670         }
 671
 672         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 673                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 674                 port->interrupt_in_urb->transfer_buffer,
 675                 port->interrupt_in_urb->transfer_buffer_length,
 676                 cypress_read_int_callback, port, priv->read_urb_interval);
 677         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 678
 679         if (result) {
 680                 dev_err(&port->dev,
 681                         "%s - failed submitting read urb, error %d\n",
 682                                                         __func__, result);
 683                 cypress_set_dead(port);
 684         }
 685         port->port.drain_delay = 256;
 686         return result;
 687 } /* cypress_open */
 688
 689 static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 690 {
 691         struct cypress_private *priv = usb_get_serial_port_data(port);
 692         /* drop dtr and rts */
 693         priv = usb_get_serial_port_data(port);
 694         spin_lock_irq(&priv->lock);
 695         if (on == 0)
 696                 priv->line_control = 0;
 697         else
 698                 priv->line_control = CONTROL_DTR | CONTROL_RTS;
 699         priv->cmd_ctrl = 1;
 700         spin_unlock_irq(&priv->lock);
 701         cypress_write(NULL, port, NULL, 0);
 702 }
 703
 704 static void cypress_close(struct usb_serial_port *port)
 705 {
 706         struct cypress_private *priv = usb_get_serial_port_data(port);
 707
 708         dbg("%s - port %d", __func__, port->number);
 709
 710         /* writing is potentially harmful, lock must be taken */
 711         mutex_lock(&port->serial->disc_mutex);
 712         if (port->serial->disconnected) {
 713                 mutex_unlock(&port->serial->disc_mutex);
 714                 return;
 715         }
 716         cypress_buf_clear(priv->buf);
 717         dbg("%s - stopping urbs", __func__);
 718         usb_kill_urb(port->interrupt_in_urb);
 719         usb_kill_urb(port->interrupt_out_urb);
 720
 721
 722         if (stats)
 723                 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 724                         priv->bytes_in, priv->bytes_out, priv->cmd_count);
 725         mutex_unlock(&port->serial->disc_mutex);
 726 } /* cypress_close */
 727
 728
 729 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 730                                         const unsigned char *buf, int count)
 731 {
 732         struct cypress_private *priv = usb_get_serial_port_data(port);
 733         unsigned long flags;
 734
 735         dbg("%s - port %d, %d bytes", __func__, port->number, count);
 736
 737         /* line control commands, which need to be executed immediately,
 738            are not put into the buffer for obvious reasons.
 739          */
 740         if (priv->cmd_ctrl) {
 741                 count = 0;
 742                 goto finish;
 743         }
 744
 745         if (!count)
 746                 return count;
 747
 748         spin_lock_irqsave(&priv->lock, flags);
 749         count = cypress_buf_put(priv->buf, buf, count);
 750         spin_unlock_irqrestore(&priv->lock, flags);
 751
 752 finish:
 753         cypress_send(port);
 754
 755         return count;
 756 } /* cypress_write */
 757
 758
 759 static void cypress_send(struct usb_serial_port *port)
 760 {
 761         int count = 0, result, offset, actual_size;
 762         struct cypress_private *priv = usb_get_serial_port_data(port);
 763         unsigned long flags;
 764
 765         if (!priv->comm_is_ok)
 766                 return;
 767
 768         dbg("%s - port %d", __func__, port->number);
 769         dbg("%s - interrupt out size is %d", __func__,
 770                                                 port->interrupt_out_size);
 771
 772         spin_lock_irqsave(&priv->lock, flags);
 773         if (priv->write_urb_in_use) {
 774                 dbg("%s - can't write, urb in use", __func__);
 775                 spin_unlock_irqrestore(&priv->lock, flags);
 776                 return;
 777         }
 778         spin_unlock_irqrestore(&priv->lock, flags);
 779
 780         /* clear buffer */
 781         memset(port->interrupt_out_urb->transfer_buffer, 0,
 782                                                 port->interrupt_out_size);
 783
 784         spin_lock_irqsave(&priv->lock, flags);
 785         switch (priv->pkt_fmt) {
 786         default:
 787         case packet_format_1:
 788                 /* this is for the CY7C64013... */
 789                 offset = 2;
 790                 port->interrupt_out_buffer[0] = priv->line_control;
 791                 break;
 792         case packet_format_2:
 793                 /* this is for the CY7C63743... */
 794                 offset = 1;
 795                 port->interrupt_out_buffer[0] = priv->line_control;
 796                 break;
 797         }
 798
 799         if (priv->line_control & CONTROL_RESET)
 800                 priv->line_control &= ~CONTROL_RESET;
 801
 802         if (priv->cmd_ctrl) {
 803                 priv->cmd_count++;
 804                 dbg("%s - line control command being issued", __func__);
 805                 spin_unlock_irqrestore(&priv->lock, flags);
 806                 goto send;
 807         } else
 808                 spin_unlock_irqrestore(&priv->lock, flags);
 809
 810         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 811                                 port->interrupt_out_size-offset);
 812
 813         if (count == 0)
 814                 return;
 815
 816         switch (priv->pkt_fmt) {
 817         default:
 818         case packet_format_1:
 819                 port->interrupt_out_buffer[1] = count;
 820                 break;
 821         case packet_format_2:
 822                 port->interrupt_out_buffer[0] |= count;
 823         }
 824
 825         dbg("%s - count is %d", __func__, count);
 826
 827 send:
 828         spin_lock_irqsave(&priv->lock, flags);
 829         priv->write_urb_in_use = 1;
 830         spin_unlock_irqrestore(&priv->lock, flags);
 831
 832         if (priv->cmd_ctrl)
 833                 actual_size = 1;
 834         else
 835                 actual_size = count +
 836                               (priv->pkt_fmt == packet_format_1 ? 2 : 1);
 837
 838         usb_serial_debug_data(debug, &port->dev, __func__,
 839                 port->interrupt_out_size,
 840                 port->interrupt_out_urb->transfer_buffer);
 841
 842         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 843                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 844                 port->interrupt_out_buffer, port->interrupt_out_size,
 845                 cypress_write_int_callback, port, priv->write_urb_interval);
 846         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 847         if (result) {
 848                 dev_err(&port->dev,
 849                                 "%s - failed submitting write urb, error %d\n",
 850                                                         __func__, result);
 851                 priv->write_urb_in_use = 0;
 852                 cypress_set_dead(port);
 853         }
 854
 855         spin_lock_irqsave(&priv->lock, flags);
 856         if (priv->cmd_ctrl)
 857                 priv->cmd_ctrl = 0;
 858
 859         /* do not count the line control and size bytes */
 860         priv->bytes_out += count;
 861         spin_unlock_irqrestore(&priv->lock, flags);
 862
 863         usb_serial_port_softint(port);
 864 } /* cypress_send */
 865
 866
 867 /* returns how much space is available in the soft buffer */
 868 static int cypress_write_room(struct tty_struct *tty)
 869 {
 870         struct usb_serial_port *port = tty->driver_data;
 871         struct cypress_private *priv = usb_get_serial_port_data(port);
 872         int room = 0;
 873         unsigned long flags;
 874
 875         dbg("%s - port %d", __func__, port->number);
 876
 877         spin_lock_irqsave(&priv->lock, flags);
 878         room = cypress_buf_space_avail(priv->buf);
 879         spin_unlock_irqrestore(&priv->lock, flags);
 880
 881         dbg("%s - returns %d", __func__, room);
 882         return room;
 883 }
 884
 885
 886 static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 887 {
 888         struct usb_serial_port *port = tty->driver_data;
 889         struct cypress_private *priv = usb_get_serial_port_data(port);
 890         __u8 status, control;
 891         unsigned int result = 0;
 892         unsigned long flags;
 893
 894         dbg("%s - port %d", __func__, port->number);
 895
 896         spin_lock_irqsave(&priv->lock, flags);
 897         control = priv->line_control;
 898         status = priv->current_status;
 899         spin_unlock_irqrestore(&priv->lock, flags);
 900
 901         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 902                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 903                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 904                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 905                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 906                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 907
 908         dbg("%s - result = %x", __func__, result);
 909
 910         return result;
 911 }
 912
 913
 914 static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 915                                unsigned int set, unsigned int clear)
 916 {
 917         struct usb_serial_port *port = tty->driver_data;
 918         struct cypress_private *priv = usb_get_serial_port_data(port);
 919         unsigned long flags;
 920
 921         dbg("%s - port %d", __func__, port->number);
 922
 923         spin_lock_irqsave(&priv->lock, flags);
 924         if (set & TIOCM_RTS)
 925                 priv->line_control |= CONTROL_RTS;
 926         if (set & TIOCM_DTR)
 927                 priv->line_control |= CONTROL_DTR;
 928         if (clear & TIOCM_RTS)
 929                 priv->line_control &= ~CONTROL_RTS;
 930         if (clear & TIOCM_DTR)
 931                 priv->line_control &= ~CONTROL_DTR;
 932         priv->cmd_ctrl = 1;
 933         spin_unlock_irqrestore(&priv->lock, flags);
 934
 935         return cypress_write(tty, port, NULL, 0);
 936 }
 937
 938
 939 static int cypress_ioctl(struct tty_struct *tty, struct file *file,
 940                                         unsigned int cmd, unsigned long arg)
 941 {
 942         struct usb_serial_port *port = tty->driver_data;
 943         struct cypress_private *priv = usb_get_serial_port_data(port);
 944
 945         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 946
 947         switch (cmd) {
 948         /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 949         case TIOCMIWAIT:
 950                 while (priv != NULL) {
 951                         interruptible_sleep_on(&priv->delta_msr_wait);
 952                         /* see if a signal did it */
 953                         if (signal_pending(current))
 954                                 return -ERESTARTSYS;
 955                         else {
 956                                 char diff = priv->diff_status;
 957                                 if (diff == 0)
 958                                         return -EIO; /* no change => error */
 959
 960                                 /* consume all events */
 961                                 priv->diff_status = 0;
 962
 963                                 /* return 0 if caller wanted to know about
 964                                    these bits */
 965                                 if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
 966                                     ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
 967                                     ((arg & TIOCM_CD) && (diff & UART_CD)) ||
 968                                     ((arg & TIOCM_CTS) && (diff & UART_CTS)))
 969                                         return 0;
 970                                 /* otherwise caller can't care less about what
 971                                  * happened, and so we continue to wait for
 972                                  * more events.
 973                                  */
 974                         }
 975                 }
 976                 return 0;
 977         default:
 978                 break;
 979         }
 980         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
 981         return -ENOIOCTLCMD;
 982 } /* cypress_ioctl */
 983
 984
 985 static void cypress_set_termios(struct tty_struct *tty,
 986         struct usb_serial_port *port, struct ktermios *old_termios)
 987 {
 988         struct cypress_private *priv = usb_get_serial_port_data(port);
 989         int data_bits, stop_bits, parity_type, parity_enable;
 990         unsigned cflag, iflag;
 991         unsigned long flags;
 992         __u8 oldlines;
 993         int linechange = 0;
 994
 995         dbg("%s - port %d", __func__, port->number);
 996
 997         spin_lock_irqsave(&priv->lock, flags);
 998         /* We can't clean this one up as we don't know the device type
 999            early enough */
1000         if (!priv->termios_initialized) {
1001                 if (priv->chiptype == CT_EARTHMATE) {
1002                         *(tty->termios) = tty_std_termios;
1003                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1004                                 CLOCAL;
1005                         tty->termios->c_ispeed = 4800;
1006                         tty->termios->c_ospeed = 4800;
1007                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1008                         *(tty->termios) = tty_std_termios;
1009                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1010                                 CLOCAL;
1011                         tty->termios->c_ispeed = 9600;
1012                         tty->termios->c_ospeed = 9600;
1013                 } else if (priv->chiptype == CT_CA42V2) {
1014                         *(tty->termios) = tty_std_termios;
1015                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1016                                 CLOCAL;
1017                         tty->termios->c_ispeed = 9600;
1018                         tty->termios->c_ospeed = 9600;
1019                 }
1020                 priv->termios_initialized = 1;
1021         }
1022         spin_unlock_irqrestore(&priv->lock, flags);
1023
1024         /* Unsupported features need clearing */
1025         tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
1026
1027         cflag = tty->termios->c_cflag;
1028         iflag = tty->termios->c_iflag;
1029
1030         /* check if there are new settings */
1031         if (old_termios) {
1032                 spin_lock_irqsave(&priv->lock, flags);
1033                 priv->tmp_termios = *(tty->termios);
1034                 spin_unlock_irqrestore(&priv->lock, flags);
1035         }
1036
1037         /* set number of data bits, parity, stop bits */
1038         /* when parity is disabled the parity type bit is ignored */
1039
1040         /* 1 means 2 stop bits, 0 means 1 stop bit */
1041         stop_bits = cflag & CSTOPB ? 1 : 0;
1042
1043         if (cflag & PARENB) {
1044                 parity_enable = 1;
1045                 /* 1 means odd parity, 0 means even parity */
1046                 parity_type = cflag & PARODD ? 1 : 0;
1047         } else
1048                 parity_enable = parity_type = 0;
1049
1050         switch (cflag & CSIZE) {
1051         case CS5:
1052                 data_bits = 0;
1053                 break;
1054         case CS6:
1055                 data_bits = 1;
1056                 break;
1057         case CS7:
1058                 data_bits = 2;
1059                 break;
1060         case CS8:
1061                 data_bits = 3;
1062                 break;
1063         default:
1064                 dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
1065                         __func__);
1066                 data_bits = 3;
1067         }
1068         spin_lock_irqsave(&priv->lock, flags);
1069         oldlines = priv->line_control;
1070         if ((cflag & CBAUD) == B0) {
1071                 /* drop dtr and rts */
1072                 dbg("%s - dropping the lines, baud rate 0bps", __func__);
1073                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1074         } else
1075                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1076         spin_unlock_irqrestore(&priv->lock, flags);
1077
1078         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1079                         "%d data_bits (+5)", __func__, stop_bits,
1080                         parity_enable, parity_type, data_bits);
1081
1082         cypress_serial_control(tty, port, tty_get_baud_rate(tty),
1083                         data_bits, stop_bits,
1084                         parity_enable, parity_type,
1085                         0, CYPRESS_SET_CONFIG);
1086
1087         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1088          * filled into the private structure this should confirm that all is
1089          * working if it returns what we just set */
1090         cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1091
1092         /* Here we can define custom tty settings for devices; the main tty
1093          * termios flag base comes from empeg.c */
1094
1095         spin_lock_irqsave(&priv->lock, flags);
1096         if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
1097                 dbg("Using custom termios settings for a baud rate of "
1098                                 "4800bps.");
1099                 /* define custom termios settings for NMEA protocol */
1100
1101                 tty->termios->c_iflag /* input modes - */
1102                         &= ~(IGNBRK  /* disable ignore break */
1103                         | BRKINT     /* disable break causes interrupt */
1104                         | PARMRK     /* disable mark parity errors */
1105                         | ISTRIP     /* disable clear high bit of input char */
1106                         | INLCR      /* disable translate NL to CR */
1107                         | IGNCR      /* disable ignore CR */
1108                         | ICRNL      /* disable translate CR to NL */
1109                         | IXON);     /* disable enable XON/XOFF flow control */
1110
1111                 tty->termios->c_oflag /* output modes */
1112                         &= ~OPOST;    /* disable postprocess output char */
1113
1114                 tty->termios->c_lflag /* line discipline modes */
1115                         &= ~(ECHO     /* disable echo input characters */
1116                         | ECHONL      /* disable echo new line */
1117                         | ICANON      /* disable erase, kill, werase, and rprnt
1118                                          special characters */
1119                         | ISIG        /* disable interrupt, quit, and suspend
1120                                          special characters */
1121                         | IEXTEN);    /* disable non-POSIX special characters */
1122         } /* CT_CYPHIDCOM: Application should handle this for device */
1123
1124         linechange = (priv->line_control != oldlines);
1125         spin_unlock_irqrestore(&priv->lock, flags);
1126
1127         /* if necessary, set lines */
1128         if (linechange) {
1129                 priv->cmd_ctrl = 1;
1130                 cypress_write(tty, port, NULL, 0);
1131         }
1132 } /* cypress_set_termios */
1133
1134
1135 /* returns amount of data still left in soft buffer */
1136 static int cypress_chars_in_buffer(struct tty_struct *tty)
1137 {
1138         struct usb_serial_port *port = tty->driver_data;
1139         struct cypress_private *priv = usb_get_serial_port_data(port);
1140         int chars = 0;
1141         unsigned long flags;
1142
1143         dbg("%s - port %d", __func__, port->number);
1144
1145         spin_lock_irqsave(&priv->lock, flags);
1146         chars = cypress_buf_data_avail(priv->buf);
1147         spin_unlock_irqrestore(&priv->lock, flags);
1148
1149         dbg("%s - returns %d", __func__, chars);
1150         return chars;
1151 }
1152
1153
1154 static void cypress_throttle(struct tty_struct *tty)
1155 {
1156         struct usb_serial_port *port = tty->driver_data;
1157         struct cypress_private *priv = usb_get_serial_port_data(port);
1158
1159         dbg("%s - port %d", __func__, port->number);
1160
1161         spin_lock_irq(&priv->lock);
1162         priv->rx_flags = THROTTLED;
1163         spin_unlock_irq(&priv->lock);
1164 }
1165
1166
1167 static void cypress_unthrottle(struct tty_struct *tty)
1168 {
1169         struct usb_serial_port *port = tty->driver_data;
1170         struct cypress_private *priv = usb_get_serial_port_data(port);
1171         int actually_throttled, result;
1172
1173         dbg("%s - port %d", __func__, port->number);
1174
1175         spin_lock_irq(&priv->lock);
1176         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1177         priv->rx_flags = 0;
1178         spin_unlock_irq(&priv->lock);
1179
1180         if (!priv->comm_is_ok)
1181                 return;
1182
1183         if (actually_throttled) {
1184                 port->interrupt_in_urb->dev = port->serial->dev;
1185
1186                 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1187                 if (result) {
1188                         dev_err(&port->dev, "%s - failed submitting read urb, "
1189                                         "error %d\n", __func__, result);
1190                         cypress_set_dead(port);
1191                 }
1192         }
1193 }
1194
1195
1196 static void cypress_read_int_callback(struct urb *urb)
1197 {
1198         struct usb_serial_port *port = urb->context;
1199         struct cypress_private *priv = usb_get_serial_port_data(port);
1200         struct tty_struct *tty;
1201         unsigned char *data = urb->transfer_buffer;
1202         unsigned long flags;
1203         char tty_flag = TTY_NORMAL;
1204         int havedata = 0;
1205         int bytes = 0;
1206         int result;
1207         int i = 0;
1208         int status = urb->status;
1209
1210         dbg("%s - port %d", __func__, port->number);
1211
1212         switch (status) {
1213         case 0: /* success */
1214                 break;
1215         case -ECONNRESET:
1216         case -ENOENT:
1217         case -ESHUTDOWN:
1218                 /* precursor to disconnect so just go away */
1219                 return;
1220         case -EPIPE:
1221                 /* Can't call usb_clear_halt while in_interrupt */
1222                 /* FALLS THROUGH */
1223         default:
1224                 /* something ugly is going on... */
1225                 dev_err(&urb->dev->dev,
1226                         "%s - unexpected nonzero read status received: %d\n",
1227                                                         __func__, status);
1228                 cypress_set_dead(port);
1229                 return;
1230         }
1231
1232         spin_lock_irqsave(&priv->lock, flags);
1233         if (priv->rx_flags & THROTTLED) {
1234                 dbg("%s - now throttling", __func__);
1235                 priv->rx_flags |= ACTUALLY_THROTTLED;
1236                 spin_unlock_irqrestore(&priv->lock, flags);
1237                 return;
1238         }
1239         spin_unlock_irqrestore(&priv->lock, flags);
1240
1241         tty = tty_port_tty_get(&port->port);
1242         if (!tty) {
1243                 dbg("%s - bad tty pointer - exiting", __func__);
1244                 return;
1245         }
1246
1247         spin_lock_irqsave(&priv->lock, flags);
1248         result = urb->actual_length;
1249         switch (priv->pkt_fmt) {
1250         default:
1251         case packet_format_1:
1252                 /* This is for the CY7C64013... */
1253                 priv->current_status = data[0] & 0xF8;
1254                 bytes = data[1] + 2;
1255                 i = 2;
1256                 if (bytes > 2)
1257                         havedata = 1;
1258                 break;
1259         case packet_format_2:
1260                 /* This is for the CY7C63743... */
1261                 priv->current_status = data[0] & 0xF8;
1262                 bytes = (data[0] & 0x07) + 1;
1263                 i = 1;
1264                 if (bytes > 1)
1265                         havedata = 1;
1266                 break;
1267         }
1268         spin_unlock_irqrestore(&priv->lock, flags);
1269         if (result < bytes) {
1270                 dbg("%s - wrong packet size - received %d bytes but packet "
1271                     "said %d bytes", __func__, result, bytes);
1272                 goto continue_read;
1273         }
1274
1275         usb_serial_debug_data(debug, &port->dev, __func__,
1276                                                 urb->actual_length, data);
1277
1278         spin_lock_irqsave(&priv->lock, flags);
1279         /* check to see if status has changed */
1280         if (priv->current_status != priv->prev_status) {
1281                 priv->diff_status |= priv->current_status ^
1282                         priv->prev_status;
1283                 wake_up_interruptible(&priv->delta_msr_wait);
1284                 priv->prev_status = priv->current_status;
1285         }
1286         spin_unlock_irqrestore(&priv->lock, flags);
1287
1288         /* hangup, as defined in acm.c... this might be a bad place for it
1289          * though */
1290         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1291                         !(priv->current_status & UART_CD)) {
1292                 dbg("%s - calling hangup", __func__);
1293                 tty_hangup(tty);
1294                 goto continue_read;
1295         }
1296
1297         /* There is one error bit... I'm assuming it is a parity error
1298          * indicator as the generic firmware will set this bit to 1 if a
1299          * parity error occurs.
1300          * I can not find reference to any other error events. */
1301         spin_lock_irqsave(&priv->lock, flags);
1302         if (priv->current_status & CYP_ERROR) {
1303                 spin_unlock_irqrestore(&priv->lock, flags);
1304                 tty_flag = TTY_PARITY;
1305                 dbg("%s - Parity Error detected", __func__);
1306         } else
1307                 spin_unlock_irqrestore(&priv->lock, flags);
1308
1309         /* process read if there is data other than line status */
1310         if (tty && (bytes > i)) {
1311                 bytes = tty_buffer_request_room(tty, bytes);
1312                 for (; i < bytes ; ++i) {
1313                         dbg("pushing byte number %d - %d - %c", i, data[i],
1314                                         data[i]);
1315                         tty_insert_flip_char(tty, data[i], tty_flag);
1316                 }
1317                 tty_flip_buffer_push(tty);
1318         }
1319
1320         spin_lock_irqsave(&priv->lock, flags);
1321         /* control and status byte(s) are also counted */
1322         priv->bytes_in += bytes;
1323         spin_unlock_irqrestore(&priv->lock, flags);
1324
1325 continue_read:
1326         tty_kref_put(tty);
1327
1328         /* Continue trying to always read... unless the port has closed. */
1329
1330         if (port->port.count > 0 && priv->comm_is_ok) {
1331                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1332                                 usb_rcvintpipe(port->serial->dev,
1333                                         port->interrupt_in_endpointAddress),
1334                                 port->interrupt_in_urb->transfer_buffer,
1335                                 port->interrupt_in_urb->transfer_buffer_length,
1336                                 cypress_read_int_callback, port,
1337                                 priv->read_urb_interval);
1338                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1339                 if (result) {
1340                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1341                                         "read urb, error %d\n", __func__,
1342                                         result);
1343                         cypress_set_dead(port);
1344                 }
1345         }
1346
1347         return;
1348 } /* cypress_read_int_callback */
1349
1350
1351 static void cypress_write_int_callback(struct urb *urb)
1352 {
1353         struct usb_serial_port *port = urb->context;
1354         struct cypress_private *priv = usb_get_serial_port_data(port);
1355         int result;
1356         int status = urb->status;
1357
1358         dbg("%s - port %d", __func__, port->number);
1359
1360         switch (status) {
1361         case 0:
1362                 /* success */
1363                 break;
1364         case -ECONNRESET:
1365         case -ENOENT:
1366         case -ESHUTDOWN:
1367                 /* this urb is terminated, clean up */
1368                 dbg("%s - urb shutting down with status: %d",
1369                                                 __func__, status);
1370                 priv->write_urb_in_use = 0;
1371                 return;
1372         case -EPIPE: /* no break needed; clear halt and resubmit */
1373                 if (!priv->comm_is_ok)
1374                         break;
1375                 usb_clear_halt(port->serial->dev, 0x02);
1376                 /* error in the urb, so we have to resubmit it */
1377                 dbg("%s - nonzero write bulk status received: %d",
1378                         __func__, status);
1379                 port->interrupt_out_urb->transfer_buffer_length = 1;
1380                 port->interrupt_out_urb->dev = port->serial->dev;
1381                 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1382                 if (!result)
1383                         return;
1384                 dev_err(&urb->dev->dev,
1385                         "%s - failed resubmitting write urb, error %d\n",
1386                                                         __func__, result);
1387                 cypress_set_dead(port);
1388                 break;
1389         default:
1390                 dev_err(&urb->dev->dev,
1391                          "%s - unexpected nonzero write status received: %d\n",
1392                                                         __func__, status);
1393                 cypress_set_dead(port);
1394                 break;
1395         }
1396         priv->write_urb_in_use = 0;
1397
1398         /* send any buffered data */
1399         cypress_send(port);
1400 }
1401
1402
1403 /*****************************************************************************
1404  * Write buffer functions - buffering code from pl2303 used
1405  *****************************************************************************/
1406
1407 /*
1408  * cypress_buf_alloc
1409  *
1410  * Allocate a circular buffer and all associated memory.
1411  */
1412
1413 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1414 {
1415
1416         struct cypress_buf *cb;
1417
1418
1419         if (size == 0)
1420                 return NULL;
1421
1422         cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1423         if (cb == NULL)
1424                 return NULL;
1425
1426         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1427         if (cb->buf_buf == NULL) {
1428                 kfree(cb);
1429                 return NULL;
1430         }
1431
1432         cb->buf_size = size;
1433         cb->buf_get = cb->buf_put = cb->buf_buf;
1434
1435         return cb;
1436
1437 }
1438
1439
1440 /*
1441  * cypress_buf_free
1442  *
1443  * Free the buffer and all associated memory.
1444  */
1445
1446 static void cypress_buf_free(struct cypress_buf *cb)
1447 {
1448         if (cb) {
1449                 kfree(cb->buf_buf);
1450                 kfree(cb);
1451         }
1452 }
1453
1454
1455 /*
1456  * cypress_buf_clear
1457  *
1458  * Clear out all data in the circular buffer.
1459  */
1460
1461 static void cypress_buf_clear(struct cypress_buf *cb)
1462 {
1463         if (cb != NULL)
1464                 cb->buf_get = cb->buf_put;
1465                 /* equivalent to a get of all data available */
1466 }
1467
1468
1469 /*
1470  * cypress_buf_data_avail
1471  *
1472  * Return the number of bytes of data available in the circular
1473  * buffer.
1474  */
1475
1476 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1477 {
1478         if (cb != NULL)
1479                 return (cb->buf_size + cb->buf_put - cb->buf_get)
1480                                                         % cb->buf_size;
1481         else
1482                 return 0;
1483 }
1484
1485
1486 /*
1487  * cypress_buf_space_avail
1488  *
1489  * Return the number of bytes of space available in the circular
1490  * buffer.
1491  */
1492
1493 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1494 {
1495         if (cb != NULL)
1496                 return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
1497                                                         % cb->buf_size;
1498         else
1499                 return 0;
1500 }
1501
1502
1503 /*
1504  * cypress_buf_put
1505  *
1506  * Copy data data from a user buffer and put it into the circular buffer.
1507  * Restrict to the amount of space available.
1508  *
1509  * Return the number of bytes copied.
1510  */
1511
1512 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1513         unsigned int count)
1514 {
1515
1516         unsigned int len;
1517
1518
1519         if (cb == NULL)
1520                 return 0;
1521
1522         len  = cypress_buf_space_avail(cb);
1523         if (count > len)
1524                 count = len;
1525
1526         if (count == 0)
1527                 return 0;
1528
1529         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1530         if (count > len) {
1531                 memcpy(cb->buf_put, buf, len);
1532                 memcpy(cb->buf_buf, buf+len, count - len);
1533                 cb->buf_put = cb->buf_buf + count - len;
1534         } else {
1535                 memcpy(cb->buf_put, buf, count);
1536                 if (count < len)
1537                         cb->buf_put += count;
1538                 else /* count == len */
1539                         cb->buf_put = cb->buf_buf;
1540         }
1541
1542         return count;
1543
1544 }
1545
1546
1547 /*
1548  * cypress_buf_get
1549  *
1550  * Get data from the circular buffer and copy to the given buffer.
1551  * Restrict to the amount of data available.
1552  *
1553  * Return the number of bytes copied.
1554  */
1555
1556 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1557         unsigned int count)
1558 {
1559
1560         unsigned int len;
1561
1562
1563         if (cb == NULL)
1564                 return 0;
1565
1566         len = cypress_buf_data_avail(cb);
1567         if (count > len)
1568                 count = len;
1569
1570         if (count == 0)
1571                 return 0;
1572
1573         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1574         if (count > len) {
1575                 memcpy(buf, cb->buf_get, len);
1576                 memcpy(buf+len, cb->buf_buf, count - len);
1577                 cb->buf_get = cb->buf_buf + count - len;
1578         } else {
1579                 memcpy(buf, cb->buf_get, count);
1580                 if (count < len)
1581                         cb->buf_get += count;
1582                 else /* count == len */
1583                         cb->buf_get = cb->buf_buf;
1584         }
1585
1586         return count;
1587
1588 }
1589
1590 /*****************************************************************************
1591  * Module functions
1592  *****************************************************************************/
1593
1594 static int __init cypress_init(void)
1595 {
1596         int retval;
1597
1598         dbg("%s", __func__);
1599
1600         retval = usb_serial_register(&cypress_earthmate_device);
1601         if (retval)
1602                 goto failed_em_register;
1603         retval = usb_serial_register(&cypress_hidcom_device);
1604         if (retval)
1605                 goto failed_hidcom_register;
1606         retval = usb_serial_register(&cypress_ca42v2_device);
1607         if (retval)
1608                 goto failed_ca42v2_register;
1609         retval = usb_register(&cypress_driver);
1610         if (retval)
1611                 goto failed_usb_register;
1612
1613         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1614                DRIVER_DESC "\n");
1615         return 0;
1616
1617 failed_usb_register:
1618         usb_serial_deregister(&cypress_ca42v2_device);
1619 failed_ca42v2_register:
1620         usb_serial_deregister(&cypress_hidcom_device);
1621 failed_hidcom_register:
1622         usb_serial_deregister(&cypress_earthmate_device);
1623 failed_em_register:
1624         return retval;
1625 }
1626
1627
1628 static void __exit cypress_exit(void)
1629 {
1630         dbg("%s", __func__);
1631
1632         usb_deregister(&cypress_driver);
1633         usb_serial_deregister(&cypress_earthmate_device);
1634         usb_serial_deregister(&cypress_hidcom_device);
1635         usb_serial_deregister(&cypress_ca42v2_device);
1636 }
1637
1638
1639 module_init(cypress_init);
1640 module_exit(cypress_exit);
1641
1642 MODULE_AUTHOR(DRIVER_AUTHOR);
1643 MODULE_DESCRIPTION(DRIVER_DESC);
1644 MODULE_VERSION(DRIVER_VERSION);
1645 MODULE_LICENSE("GPL");
1646
1647 module_param(debug, bool, S_IRUGO | S_IWUSR);
1648 MODULE_PARM_DESC(debug, "Debug enabled or not");
1649 module_param(stats, bool, S_IRUGO | S_IWUSR);
1650 MODULE_PARM_DESC(stats, "Enable statistics or not");
1651 module_param(interval, int, S_IRUGO | S_IWUSR);
1652 MODULE_PARM_DESC(interval, "Overrides interrupt interval");