drivers/usb/musb/musb_virthub.c

   1 /*
   2  * MUSB OTG driver virtual root hub support
   3  *
   4  * Copyright 2005 Mentor Graphics Corporation
   5  * Copyright (C) 2005-2006 by Texas Instruments
   6  * Copyright (C) 2006-2007 Nokia Corporation
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  *
  22  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  25  * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  *
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/kernel.h>
  37 #include <linux/sched.h>
  38 #include <linux/errno.h>
  39 #include <linux/init.h>
  40 #include <linux/time.h>
  41 #include <linux/timer.h>
  42
  43 #include <asm/unaligned.h>
  44
  45 #include "musb_core.h"
  46
  47
  48 static void musb_port_suspend(struct musb *musb, bool do_suspend)
  49 {
  50         u8              power;
  51         void __iomem    *mbase = musb->mregs;
  52
  53         if (!is_host_active(musb))
  54                 return;
  55
  56         /* NOTE:  this doesn't necessarily put PHY into low power mode,
  57          * turning off its clock; that's a function of PHY integration and
  58          * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
  59          * SE0 changing to connect (J) or wakeup (K) states.
  60          */
  61         power = musb_readb(mbase, MUSB_POWER);
  62         if (do_suspend) {
  63                 int retries = 10000;
  64
  65                 power &= ~MUSB_POWER_RESUME;
  66                 power |= MUSB_POWER_SUSPENDM;
  67                 musb_writeb(mbase, MUSB_POWER, power);
  68
  69                 /* Needed for OPT A tests */
  70                 power = musb_readb(mbase, MUSB_POWER);
  71                 while (power & MUSB_POWER_SUSPENDM) {
  72                         power = musb_readb(mbase, MUSB_POWER);
  73                         if (retries-- < 1)
  74                                 break;
  75                 }
  76
  77                 dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
  78
  79                 musb->port1_status |= USB_PORT_STAT_SUSPEND;
  80                 switch (musb->xceiv->state) {
  81                 case OTG_STATE_A_HOST:
  82                         musb->xceiv->state = OTG_STATE_A_SUSPEND;
  83                         musb->is_active = is_otg_enabled(musb)
  84                                         && musb->xceiv->host->b_hnp_enable;
  85                         if (musb->is_active)
  86                                 mod_timer(&musb->otg_timer, jiffies
  87                                         + msecs_to_jiffies(
  88                                                 OTG_TIME_A_AIDL_BDIS));
  89                         musb_platform_try_idle(musb, 0);
  90                         break;
  91                 case OTG_STATE_B_HOST:
  92                         musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
  93                         musb->is_active = is_otg_enabled(musb)
  94                                         && musb->xceiv->host->b_hnp_enable;
  95                         musb_platform_try_idle(musb, 0);
  96                         break;
  97                 default:
  98                         dev_dbg(musb->controller, "bogus rh suspend? %s\n",
  99                                 otg_state_string(musb->xceiv->state));
 100                 }
 101         } else if (power & MUSB_POWER_SUSPENDM) {
 102                 power &= ~MUSB_POWER_SUSPENDM;
 103                 power |= MUSB_POWER_RESUME;
 104                 musb_writeb(mbase, MUSB_POWER, power);
 105
 106                 dev_dbg(musb->controller, "Root port resuming, power %02x\n", power);
 107
 108                 /* later, GetPortStatus will stop RESUME signaling */
 109                 musb->port1_status |= MUSB_PORT_STAT_RESUME;
 110                 musb->rh_timer = jiffies + msecs_to_jiffies(20);
 111         }
 112 }
 113
 114 static void musb_port_reset(struct musb *musb, bool do_reset)
 115 {
 116         u8              power;
 117         void __iomem    *mbase = musb->mregs;
 118
 119         if (musb->xceiv->state == OTG_STATE_B_IDLE) {
 120                 dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
 121                 musb->port1_status &= ~USB_PORT_STAT_RESET;
 122                 return;
 123         }
 124
 125         if (!is_host_active(musb))
 126                 return;
 127
 128         /* NOTE:  caller guarantees it will turn off the reset when
 129          * the appropriate amount of time has passed
 130          */
 131         power = musb_readb(mbase, MUSB_POWER);
 132         if (do_reset) {
 133
 134                 /*
 135                  * If RESUME is set, we must make sure it stays minimum 20 ms.
 136                  * Then we must clear RESUME and wait a bit to let musb start
 137                  * generating SOFs. If we don't do this, OPT HS A 6.8 tests
 138                  * fail with "Error! Did not receive an SOF before suspend
 139                  * detected".
 140                  */
 141                 if (power &  MUSB_POWER_RESUME) {
 142                         while (time_before(jiffies, musb->rh_timer))
 143                                 msleep(1);
 144                         musb_writeb(mbase, MUSB_POWER,
 145                                 power & ~MUSB_POWER_RESUME);
 146                         msleep(1);
 147                 }
 148
 149                 musb->ignore_disconnect = true;
 150                 power &= 0xf0;
 151                 musb_writeb(mbase, MUSB_POWER,
 152                                 power | MUSB_POWER_RESET);
 153
 154                 musb->port1_status |= USB_PORT_STAT_RESET;
 155                 musb->port1_status &= ~USB_PORT_STAT_ENABLE;
 156                 musb->rh_timer = jiffies + msecs_to_jiffies(50);
 157         } else {
 158                 dev_dbg(musb->controller, "root port reset stopped\n");
 159                 musb_writeb(mbase, MUSB_POWER,
 160                                 power & ~MUSB_POWER_RESET);
 161
 162                 musb->ignore_disconnect = false;
 163
 164                 power = musb_readb(mbase, MUSB_POWER);
 165                 if (power & MUSB_POWER_HSMODE) {
 166                         dev_dbg(musb->controller, "high-speed device connected\n");
 167                         musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
 168                 }
 169
 170                 musb->port1_status &= ~USB_PORT_STAT_RESET;
 171                 musb->port1_status |= USB_PORT_STAT_ENABLE
 172                                         | (USB_PORT_STAT_C_RESET << 16)
 173                                         | (USB_PORT_STAT_C_ENABLE << 16);
 174                 usb_hcd_poll_rh_status(musb_to_hcd(musb));
 175
 176                 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 177         }
 178 }
 179
 180 void musb_root_disconnect(struct musb *musb)
 181 {
 182         musb->port1_status = USB_PORT_STAT_POWER
 183                         | (USB_PORT_STAT_C_CONNECTION << 16);
 184
 185         usb_hcd_poll_rh_status(musb_to_hcd(musb));
 186         musb->is_active = 0;
 187
 188         switch (musb->xceiv->state) {
 189         case OTG_STATE_A_SUSPEND:
 190                 if (is_otg_enabled(musb)
 191                                 && musb->xceiv->host->b_hnp_enable) {
 192                         musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
 193                         musb->g.is_a_peripheral = 1;
 194                         break;
 195                 }
 196                 /* FALLTHROUGH */
 197         case OTG_STATE_A_HOST:
 198                 musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 199                 musb->is_active = 0;
 200                 break;
 201         case OTG_STATE_A_WAIT_VFALL:
 202                 musb->xceiv->state = OTG_STATE_B_IDLE;
 203                 break;
 204         default:
 205                 dev_dbg(musb->controller, "host disconnect (%s)\n",
 206                         otg_state_string(musb->xceiv->state));
 207         }
 208 }
 209
 210
 211 /*---------------------------------------------------------------------*/
 212
 213 /* Caller may or may not hold musb->lock */
 214 int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
 215 {
 216         struct musb     *musb = hcd_to_musb(hcd);
 217         int             retval = 0;
 218
 219         /* called in_irq() via usb_hcd_poll_rh_status() */
 220         if (musb->port1_status & 0xffff0000) {
 221                 *buf = 0x02;
 222                 retval = 1;
 223         }
 224         return retval;
 225 }
 226
 227 int musb_hub_control(
 228         struct usb_hcd  *hcd,
 229         u16             typeReq,
 230         u16             wValue,
 231         u16             wIndex,
 232         char            *buf,
 233         u16             wLength)
 234 {
 235         struct musb     *musb = hcd_to_musb(hcd);
 236         u32             temp;
 237         int             retval = 0;
 238         unsigned long   flags;
 239
 240         spin_lock_irqsave(&musb->lock, flags);
 241
 242         if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
 243                 spin_unlock_irqrestore(&musb->lock, flags);
 244                 return -ESHUTDOWN;
 245         }
 246
 247         /* hub features:  always zero, setting is a NOP
 248          * port features: reported, sometimes updated when host is active
 249          * no indicators
 250          */
 251         switch (typeReq) {
 252         case ClearHubFeature:
 253         case SetHubFeature:
 254                 switch (wValue) {
 255                 case C_HUB_OVER_CURRENT:
 256                 case C_HUB_LOCAL_POWER:
 257                         break;
 258                 default:
 259                         goto error;
 260                 }
 261                 break;
 262         case ClearPortFeature:
 263                 if ((wIndex & 0xff) != 1)
 264                         goto error;
 265
 266                 switch (wValue) {
 267                 case USB_PORT_FEAT_ENABLE:
 268                         break;
 269                 case USB_PORT_FEAT_SUSPEND:
 270                         musb_port_suspend(musb, false);
 271                         break;
 272                 case USB_PORT_FEAT_POWER:
 273                         if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
 274                                 musb_platform_set_vbus(musb, 0);
 275                         break;
 276                 case USB_PORT_FEAT_C_CONNECTION:
 277                 case USB_PORT_FEAT_C_ENABLE:
 278                 case USB_PORT_FEAT_C_OVER_CURRENT:
 279                 case USB_PORT_FEAT_C_RESET:
 280                 case USB_PORT_FEAT_C_SUSPEND:
 281                         break;
 282                 default:
 283                         goto error;
 284                 }
 285                 dev_dbg(musb->controller, "clear feature %d\n", wValue);
 286                 musb->port1_status &= ~(1 << wValue);
 287                 break;
 288         case GetHubDescriptor:
 289                 {
 290                 struct usb_hub_descriptor *desc = (void *)buf;
 291
 292                 desc->bDescLength = 9;
 293                 desc->bDescriptorType = 0x29;
 294                 desc->bNbrPorts = 1;
 295                 desc->wHubCharacteristics = cpu_to_le16(
 296                                   0x0001        /* per-port power switching */
 297                                 | 0x0010        /* no overcurrent reporting */
 298                                 );
 299                 desc->bPwrOn2PwrGood = 5;       /* msec/2 */
 300                 desc->bHubContrCurrent = 0;
 301
 302                 /* workaround bogus struct definition */
 303                 desc->u.hs.DeviceRemovable[0] = 0x02;   /* port 1 */
 304                 desc->u.hs.DeviceRemovable[1] = 0xff;
 305                 }
 306                 break;
 307         case GetHubStatus:
 308                 temp = 0;
 309                 *(__le32 *) buf = cpu_to_le32(temp);
 310                 break;
 311         case GetPortStatus:
 312                 if (wIndex != 1)
 313                         goto error;
 314
 315                 /* finish RESET signaling? */
 316                 if ((musb->port1_status & USB_PORT_STAT_RESET)
 317                                 && time_after_eq(jiffies, musb->rh_timer))
 318                         musb_port_reset(musb, false);
 319
 320                 /* finish RESUME signaling? */
 321                 if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
 322                                 && time_after_eq(jiffies, musb->rh_timer)) {
 323                         u8              power;
 324
 325                         power = musb_readb(musb->mregs, MUSB_POWER);
 326                         power &= ~MUSB_POWER_RESUME;
 327                         dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
 328                                         power);
 329                         musb_writeb(musb->mregs, MUSB_POWER, power);
 330
 331                         /* ISSUE:  DaVinci (RTL 1.300) disconnects after
 332                          * resume of high speed peripherals (but not full
 333                          * speed ones).
 334                          */
 335
 336                         musb->is_active = 1;
 337                         musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
 338                                         | MUSB_PORT_STAT_RESUME);
 339                         musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 340                         usb_hcd_poll_rh_status(musb_to_hcd(musb));
 341                         /* NOTE: it might really be A_WAIT_BCON ... */
 342                         musb->xceiv->state = OTG_STATE_A_HOST;
 343                 }
 344
 345                 put_unaligned(cpu_to_le32(musb->port1_status
 346                                         & ~MUSB_PORT_STAT_RESUME),
 347                                 (__le32 *) buf);
 348
 349                 /* port change status is more interesting */
 350                 dev_dbg(musb->controller, "port status %08x\n",
 351                                 musb->port1_status);
 352                 break;
 353         case SetPortFeature:
 354                 if ((wIndex & 0xff) != 1)
 355                         goto error;
 356
 357                 switch (wValue) {
 358                 case USB_PORT_FEAT_POWER:
 359                         /* NOTE: this controller has a strange state machine
 360                          * that involves "requesting sessions" according to
 361                          * magic side effects from incompletely-described
 362                          * rules about startup...
 363                          *
 364                          * This call is what really starts the host mode; be
 365                          * very careful about side effects if you reorder any
 366                          * initialization logic, e.g. for OTG, or change any
 367                          * logic relating to VBUS power-up.
 368                          */
 369                         if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
 370                                 musb_start(musb);
 371                         break;
 372                 case USB_PORT_FEAT_RESET:
 373                         musb_port_reset(musb, true);
 374                         break;
 375                 case USB_PORT_FEAT_SUSPEND:
 376                         musb_port_suspend(musb, true);
 377                         break;
 378                 case USB_PORT_FEAT_TEST:
 379                         if (unlikely(is_host_active(musb)))
 380                                 goto error;
 381
 382                         wIndex >>= 8;
 383                         switch (wIndex) {
 384                         case 1:
 385                                 pr_debug("TEST_J\n");
 386                                 temp = MUSB_TEST_J;
 387                                 break;
 388                         case 2:
 389                                 pr_debug("TEST_K\n");
 390                                 temp = MUSB_TEST_K;
 391                                 break;
 392                         case 3:
 393                                 pr_debug("TEST_SE0_NAK\n");
 394                                 temp = MUSB_TEST_SE0_NAK;
 395                                 break;
 396                         case 4:
 397                                 pr_debug("TEST_PACKET\n");
 398                                 temp = MUSB_TEST_PACKET;
 399                                 musb_load_testpacket(musb);
 400                                 break;
 401                         case 5:
 402                                 pr_debug("TEST_FORCE_ENABLE\n");
 403                                 temp = MUSB_TEST_FORCE_HOST
 404                                         | MUSB_TEST_FORCE_HS;
 405
 406                                 musb_writeb(musb->mregs, MUSB_DEVCTL,
 407                                                 MUSB_DEVCTL_SESSION);
 408                                 break;
 409                         case 6:
 410                                 pr_debug("TEST_FIFO_ACCESS\n");
 411                                 temp = MUSB_TEST_FIFO_ACCESS;
 412                                 break;
 413                         default:
 414                                 goto error;
 415                         }
 416                         musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
 417                         break;
 418                 default:
 419                         goto error;
 420                 }
 421                 dev_dbg(musb->controller, "set feature %d\n", wValue);
 422                 musb->port1_status |= 1 << wValue;
 423                 break;
 424
 425         default:
 426 error:
 427                 /* "protocol stall" on error */
 428                 retval = -EPIPE;
 429         }
 430         spin_unlock_irqrestore(&musb->lock, flags);
 431         return retval;
 432 }