2 * MUSB OTG driver virtual root hub support
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #include <linux/module.h>
36 #include <linux/kernel.h>
37 #include <linux/sched.h>
38 #include <linux/errno.h>
39 #include <linux/init.h>
40 #include <linux/time.h>
41 #include <linux/timer.h>
43 #include <asm/unaligned.h>
45 #include "musb_core.h"
48 static void musb_port_suspend(struct musb *musb, bool do_suspend)
51 void __iomem *mbase = musb->mregs;
53 if (!is_host_active(musb))
56 /* NOTE: this doesn't necessarily put PHY into low power mode,
57 * turning off its clock; that's a function of PHY integration and
58 * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect
59 * SE0 changing to connect (J) or wakeup (K) states.
61 power = musb_readb(mbase, MUSB_POWER);
65 power &= ~MUSB_POWER_RESUME;
66 power |= MUSB_POWER_SUSPENDM;
67 musb_writeb(mbase, MUSB_POWER, power);
69 /* Needed for OPT A tests */
70 power = musb_readb(mbase, MUSB_POWER);
71 while (power & MUSB_POWER_SUSPENDM) {
72 power = musb_readb(mbase, MUSB_POWER);
77 dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
79 musb->port1_status |= USB_PORT_STAT_SUSPEND;
80 switch (musb->xceiv->state) {
81 case OTG_STATE_A_HOST:
82 musb->xceiv->state = OTG_STATE_A_SUSPEND;
83 musb->is_active = is_otg_enabled(musb)
84 && musb->xceiv->host->b_hnp_enable;
86 mod_timer(&musb->otg_timer, jiffies
88 OTG_TIME_A_AIDL_BDIS));
89 musb_platform_try_idle(musb, 0);
91 #ifdef CONFIG_USB_MUSB_OTG
92 case OTG_STATE_B_HOST:
93 musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
94 musb->is_active = is_otg_enabled(musb)
95 && musb->xceiv->host->b_hnp_enable;
96 musb_platform_try_idle(musb, 0);
100 dev_dbg(musb->controller, "bogus rh suspend? %s\n",
101 otg_state_string(musb->xceiv->state));
103 } else if (power & MUSB_POWER_SUSPENDM) {
104 power &= ~MUSB_POWER_SUSPENDM;
105 power |= MUSB_POWER_RESUME;
106 musb_writeb(mbase, MUSB_POWER, power);
108 dev_dbg(musb->controller, "Root port resuming, power %02x\n", power);
110 /* later, GetPortStatus will stop RESUME signaling */
111 musb->port1_status |= MUSB_PORT_STAT_RESUME;
112 musb->rh_timer = jiffies + msecs_to_jiffies(20);
116 static void musb_port_reset(struct musb *musb, bool do_reset)
119 void __iomem *mbase = musb->mregs;
121 #ifdef CONFIG_USB_MUSB_OTG
122 if (musb->xceiv->state == OTG_STATE_B_IDLE) {
123 dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
124 musb->port1_status &= ~USB_PORT_STAT_RESET;
129 if (!is_host_active(musb))
132 /* NOTE: caller guarantees it will turn off the reset when
133 * the appropriate amount of time has passed
135 power = musb_readb(mbase, MUSB_POWER);
139 * If RESUME is set, we must make sure it stays minimum 20 ms.
140 * Then we must clear RESUME and wait a bit to let musb start
141 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
142 * fail with "Error! Did not receive an SOF before suspend
145 if (power & MUSB_POWER_RESUME) {
146 while (time_before(jiffies, musb->rh_timer))
148 musb_writeb(mbase, MUSB_POWER,
149 power & ~MUSB_POWER_RESUME);
153 musb->ignore_disconnect = true;
155 musb_writeb(mbase, MUSB_POWER,
156 power | MUSB_POWER_RESET);
158 musb->port1_status |= USB_PORT_STAT_RESET;
159 musb->port1_status &= ~USB_PORT_STAT_ENABLE;
160 musb->rh_timer = jiffies + msecs_to_jiffies(50);
162 dev_dbg(musb->controller, "root port reset stopped\n");
163 musb_writeb(mbase, MUSB_POWER,
164 power & ~MUSB_POWER_RESET);
166 musb->ignore_disconnect = false;
168 power = musb_readb(mbase, MUSB_POWER);
169 if (power & MUSB_POWER_HSMODE) {
170 dev_dbg(musb->controller, "high-speed device connected\n");
171 musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
174 musb->port1_status &= ~USB_PORT_STAT_RESET;
175 musb->port1_status |= USB_PORT_STAT_ENABLE
176 | (USB_PORT_STAT_C_RESET << 16)
177 | (USB_PORT_STAT_C_ENABLE << 16);
178 usb_hcd_poll_rh_status(musb_to_hcd(musb));
180 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
184 void musb_root_disconnect(struct musb *musb)
186 musb->port1_status = USB_PORT_STAT_POWER
187 | (USB_PORT_STAT_C_CONNECTION << 16);
189 usb_hcd_poll_rh_status(musb_to_hcd(musb));
192 switch (musb->xceiv->state) {
193 case OTG_STATE_A_SUSPEND:
194 #ifdef CONFIG_USB_MUSB_OTG
195 if (is_otg_enabled(musb)
196 && musb->xceiv->host->b_hnp_enable) {
197 musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
198 musb->g.is_a_peripheral = 1;
203 case OTG_STATE_A_HOST:
204 musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
207 case OTG_STATE_A_WAIT_VFALL:
208 musb->xceiv->state = OTG_STATE_B_IDLE;
211 dev_dbg(musb->controller, "host disconnect (%s)\n",
212 otg_state_string(musb->xceiv->state));
217 /*---------------------------------------------------------------------*/
219 /* Caller may or may not hold musb->lock */
220 int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
222 struct musb *musb = hcd_to_musb(hcd);
225 /* called in_irq() via usb_hcd_poll_rh_status() */
226 if (musb->port1_status & 0xffff0000) {
233 int musb_hub_control(
241 struct musb *musb = hcd_to_musb(hcd);
246 spin_lock_irqsave(&musb->lock, flags);
248 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
249 spin_unlock_irqrestore(&musb->lock, flags);
253 /* hub features: always zero, setting is a NOP
254 * port features: reported, sometimes updated when host is active
258 case ClearHubFeature:
261 case C_HUB_OVER_CURRENT:
262 case C_HUB_LOCAL_POWER:
268 case ClearPortFeature:
269 if ((wIndex & 0xff) != 1)
273 case USB_PORT_FEAT_ENABLE:
275 case USB_PORT_FEAT_SUSPEND:
276 musb_port_suspend(musb, false);
278 case USB_PORT_FEAT_POWER:
279 if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
280 musb_platform_set_vbus(musb, 0);
282 case USB_PORT_FEAT_C_CONNECTION:
283 case USB_PORT_FEAT_C_ENABLE:
284 case USB_PORT_FEAT_C_OVER_CURRENT:
285 case USB_PORT_FEAT_C_RESET:
286 case USB_PORT_FEAT_C_SUSPEND:
291 dev_dbg(musb->controller, "clear feature %d\n", wValue);
292 musb->port1_status &= ~(1 << wValue);
294 case GetHubDescriptor:
296 struct usb_hub_descriptor *desc = (void *)buf;
298 desc->bDescLength = 9;
299 desc->bDescriptorType = 0x29;
301 desc->wHubCharacteristics = cpu_to_le16(
302 0x0001 /* per-port power switching */
303 | 0x0010 /* no overcurrent reporting */
305 desc->bPwrOn2PwrGood = 5; /* msec/2 */
306 desc->bHubContrCurrent = 0;
308 /* workaround bogus struct definition */
309 desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */
310 desc->u.hs.DeviceRemovable[1] = 0xff;
315 *(__le32 *) buf = cpu_to_le32(temp);
321 /* finish RESET signaling? */
322 if ((musb->port1_status & USB_PORT_STAT_RESET)
323 && time_after_eq(jiffies, musb->rh_timer))
324 musb_port_reset(musb, false);
326 /* finish RESUME signaling? */
327 if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
328 && time_after_eq(jiffies, musb->rh_timer)) {
331 power = musb_readb(musb->mregs, MUSB_POWER);
332 power &= ~MUSB_POWER_RESUME;
333 dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
335 musb_writeb(musb->mregs, MUSB_POWER, power);
337 /* ISSUE: DaVinci (RTL 1.300) disconnects after
338 * resume of high speed peripherals (but not full
343 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
344 | MUSB_PORT_STAT_RESUME);
345 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
346 usb_hcd_poll_rh_status(musb_to_hcd(musb));
347 /* NOTE: it might really be A_WAIT_BCON ... */
348 musb->xceiv->state = OTG_STATE_A_HOST;
351 put_unaligned(cpu_to_le32(musb->port1_status
352 & ~MUSB_PORT_STAT_RESUME),
355 /* port change status is more interesting */
356 dev_dbg(musb->controller, "port status %08x\n",
360 if ((wIndex & 0xff) != 1)
364 case USB_PORT_FEAT_POWER:
365 /* NOTE: this controller has a strange state machine
366 * that involves "requesting sessions" according to
367 * magic side effects from incompletely-described
368 * rules about startup...
370 * This call is what really starts the host mode; be
371 * very careful about side effects if you reorder any
372 * initialization logic, e.g. for OTG, or change any
373 * logic relating to VBUS power-up.
375 if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
378 case USB_PORT_FEAT_RESET:
379 musb_port_reset(musb, true);
381 case USB_PORT_FEAT_SUSPEND:
382 musb_port_suspend(musb, true);
384 case USB_PORT_FEAT_TEST:
385 if (unlikely(is_host_active(musb)))
391 pr_debug("TEST_J\n");
395 pr_debug("TEST_K\n");
399 pr_debug("TEST_SE0_NAK\n");
400 temp = MUSB_TEST_SE0_NAK;
403 pr_debug("TEST_PACKET\n");
404 temp = MUSB_TEST_PACKET;
405 musb_load_testpacket(musb);
408 pr_debug("TEST_FORCE_ENABLE\n");
409 temp = MUSB_TEST_FORCE_HOST
410 | MUSB_TEST_FORCE_HS;
412 musb_writeb(musb->mregs, MUSB_DEVCTL,
413 MUSB_DEVCTL_SESSION);
416 pr_debug("TEST_FIFO_ACCESS\n");
417 temp = MUSB_TEST_FIFO_ACCESS;
422 musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
427 dev_dbg(musb->controller, "set feature %d\n", wValue);
428 musb->port1_status |= 1 << wValue;
433 /* "protocol stall" on error */
436 spin_unlock_irqrestore(&musb->lock, flags);