xhci: correct burst count field for isoc transfers on 1.0 xhci hosts
[pandora-kernel.git] / drivers / usb / host / ehci-w90x900.c
1 /*
2  * linux/driver/usb/host/ehci-w90x900.c
3  *
4  * Copyright (c) 2008 Nuvoton technology corporation.
5  *
6  * Wan ZongShun <mcuos.com@gmail.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation;version 2 of the License.
11  *
12  */
13
14 #include <linux/platform_device.h>
15
16 /*ebable phy0 and phy1 for w90p910*/
17 #define ENPHY           (0x01<<8)
18 #define PHY0_CTR        (0xA4)
19 #define PHY1_CTR        (0xA8)
20
21 static int __devinit usb_w90x900_probe(const struct hc_driver *driver,
22                       struct platform_device *pdev)
23 {
24         struct usb_hcd *hcd;
25         struct ehci_hcd *ehci;
26         struct resource *res;
27         int retval = 0, irq;
28         unsigned long val;
29
30
31         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
32         if (!res) {
33                 retval = -ENXIO;
34                 goto err1;
35         }
36
37         hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI");
38         if (!hcd) {
39                 retval = -ENOMEM;
40                 goto err1;
41         }
42
43         hcd->rsrc_start = res->start;
44         hcd->rsrc_len = resource_size(res);
45
46         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
47                 retval = -EBUSY;
48                 goto err2;
49         }
50
51         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
52         if (hcd->regs == NULL) {
53                 retval = -EFAULT;
54                 goto err3;
55         }
56
57         ehci = hcd_to_ehci(hcd);
58         ehci->caps = hcd->regs;
59         ehci->regs = hcd->regs +
60                 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
61
62         /* enable PHY 0,1,the regs only apply to w90p910
63         *  0xA4,0xA8 were offsets of PHY0 and PHY1 controller of
64         *  w90p910 IC relative to ehci->regs.
65         */
66         val = __raw_readl(ehci->regs+PHY0_CTR);
67         val |= ENPHY;
68         __raw_writel(val, ehci->regs+PHY0_CTR);
69
70         val = __raw_readl(ehci->regs+PHY1_CTR);
71         val |= ENPHY;
72         __raw_writel(val, ehci->regs+PHY1_CTR);
73
74         ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
75         ehci->sbrn = 0x20;
76
77         irq = platform_get_irq(pdev, 0);
78         if (irq < 0)
79                 goto err4;
80
81         retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
82         if (retval != 0)
83                 goto err4;
84
85         ehci_writel(ehci, 1, &ehci->regs->configured_flag);
86
87         return retval;
88 err4:
89         iounmap(hcd->regs);
90 err3:
91         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
92 err2:
93         usb_put_hcd(hcd);
94 err1:
95         return retval;
96 }
97
98 static
99 void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
100 {
101         usb_remove_hcd(hcd);
102         iounmap(hcd->regs);
103         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
104         usb_put_hcd(hcd);
105 }
106
107 static const struct hc_driver ehci_w90x900_hc_driver = {
108         .description = hcd_name,
109         .product_desc = "Nuvoton w90x900 EHCI Host Controller",
110         .hcd_priv_size = sizeof(struct ehci_hcd),
111
112         /*
113          * generic hardware linkage
114          */
115         .irq = ehci_irq,
116         .flags = HCD_USB2|HCD_MEMORY,
117
118         /*
119          * basic lifecycle operations
120          */
121         .reset = ehci_init,
122         .start = ehci_run,
123
124         .stop = ehci_stop,
125         .shutdown = ehci_shutdown,
126
127         /*
128          * managing i/o requests and associated device resources
129          */
130         .urb_enqueue = ehci_urb_enqueue,
131         .urb_dequeue = ehci_urb_dequeue,
132         .endpoint_disable = ehci_endpoint_disable,
133         .endpoint_reset = ehci_endpoint_reset,
134
135         /*
136          * scheduling support
137          */
138         .get_frame_number = ehci_get_frame,
139
140         /*
141          * root hub support
142          */
143         .hub_status_data = ehci_hub_status_data,
144         .hub_control = ehci_hub_control,
145 #ifdef  CONFIG_PM
146         .bus_suspend = ehci_bus_suspend,
147         .bus_resume = ehci_bus_resume,
148 #endif
149         .relinquish_port        = ehci_relinquish_port,
150         .port_handed_over       = ehci_port_handed_over,
151
152         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
153 };
154
155 static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
156 {
157         if (usb_disabled())
158                 return -ENODEV;
159
160         return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev);
161 }
162
163 static int __devexit ehci_w90x900_remove(struct platform_device *pdev)
164 {
165         struct usb_hcd *hcd = platform_get_drvdata(pdev);
166
167         usb_w90x900_remove(hcd, pdev);
168
169         return 0;
170 }
171
172 static struct platform_driver ehci_hcd_w90x900_driver = {
173         .probe  = ehci_w90x900_probe,
174         .remove = __devexit_p(ehci_w90x900_remove),
175         .driver = {
176                 .name = "w90x900-ehci",
177                 .owner = THIS_MODULE,
178         },
179 };
180
181 MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
182 MODULE_DESCRIPTION("w90p910 usb ehci driver!");
183 MODULE_LICENSE("GPL");
184 MODULE_ALIAS("platform:w90p910-ehci");