drivers/tty/isicom.c

   1 /*
   2  *      This program is free software; you can redistribute it and/or
   3  *      modify it under the terms of the GNU General Public License
   4  *      as published by the Free Software Foundation; either version
   5  *      2 of the License, or (at your option) any later version.
   6  *
   7  *      Original driver code supplied by Multi-Tech
   8  *
   9  *      Changes
  10  *      1/9/98  alan@lxorguk.ukuu.org.uk
  11  *                                      Merge to 2.0.x kernel tree
  12  *                                      Obtain and use official major/minors
  13  *                                      Loader switched to a misc device
  14  *                                      (fixed range check bug as a side effect)
  15  *                                      Printk clean up
  16  *      9/12/98 alan@lxorguk.ukuu.org.uk
  17  *                                      Rough port to 2.1.x
  18  *
  19  *      10/6/99 sameer                  Merged the ISA and PCI drivers to
  20  *                                      a new unified driver.
  21  *
  22  *      3/9/99  sameer                  Added support for ISI4616 cards.
  23  *
  24  *      16/9/99 sameer                  We do not force RTS low anymore.
  25  *                                      This is to prevent the firmware
  26  *                                      from getting confused.
  27  *
  28  *      26/10/99 sameer                 Cosmetic changes:The driver now
  29  *                                      dumps the Port Count information
  30  *                                      along with I/O address and IRQ.
  31  *
  32  *      13/12/99 sameer                 Fixed the problem with IRQ sharing.
  33  *
  34  *      10/5/00  sameer                 Fixed isicom_shutdown_board()
  35  *                                      to not lower DTR on all the ports
  36  *                                      when the last port on the card is
  37  *                                      closed.
  38  *
  39  *      10/5/00  sameer                 Signal mask setup command added
  40  *                                      to  isicom_setup_port and
  41  *                                      isicom_shutdown_port.
  42  *
  43  *      24/5/00  sameer                 The driver is now SMP aware.
  44  *
  45  *
  46  *      27/11/00 Vinayak P Risbud       Fixed the Driver Crash Problem
  47  *
  48  *
  49  *      03/01/01  anil .s               Added support for resetting the
  50  *                                      internal modems on ISI cards.
  51  *
  52  *      08/02/01  anil .s               Upgraded the driver for kernel
  53  *                                      2.4.x
  54  *
  55  *      11/04/01  Kevin                 Fixed firmware load problem with
  56  *                                      ISIHP-4X card
  57  *
  58  *      30/04/01  anil .s               Fixed the remote login through
  59  *                                      ISI port problem. Now the link
  60  *                                      does not go down before password
  61  *                                      prompt.
  62  *
  63  *      03/05/01  anil .s               Fixed the problem with IRQ sharing
  64  *                                      among ISI-PCI cards.
  65  *
  66  *      03/05/01  anil .s               Added support to display the version
  67  *                                      info during insmod as well as module
  68  *                                      listing by lsmod.
  69  *
  70  *      10/05/01  anil .s               Done the modifications to the source
  71  *                                      file and Install script so that the
  72  *                                      same installation can be used for
  73  *                                      2.2.x and 2.4.x kernel.
  74  *
  75  *      06/06/01  anil .s               Now we drop both dtr and rts during
  76  *                                      shutdown_port as well as raise them
  77  *                                      during isicom_config_port.
  78  *
  79  *      09/06/01 acme@conectiva.com.br  use capable, not suser, do
  80  *                                      restore_flags on failure in
  81  *                                      isicom_send_break, verify put_user
  82  *                                      result
  83  *
  84  *      11/02/03  ranjeeth              Added support for 230 Kbps and 460 Kbps
  85  *                                      Baud index extended to 21
  86  *
  87  *      20/03/03  ranjeeth              Made to work for Linux Advanced server.
  88  *                                      Taken care of license warning.
  89  *
  90  *      10/12/03  Ravindra              Made to work for Fedora Core 1 of
  91  *                                      Red Hat Distribution
  92  *
  93  *      06/01/05  Alan Cox              Merged the ISI and base kernel strands
  94  *                                      into a single 2.6 driver
  95  *
  96  *      ***********************************************************
  97  *
  98  *      To use this driver you also need the support package. You
  99  *      can find this in RPM format on
 100  *              ftp://ftp.linux.org.uk/pub/linux/alan
 101  *
 102  *      You can find the original tools for this direct from Multitech
 103  *              ftp://ftp.multitech.com/ISI-Cards/
 104  *
 105  *      Having installed the cards the module options (/etc/modprobe.conf)
 106  *
 107  *      options isicom   io=card1,card2,card3,card4 irq=card1,card2,card3,card4
 108  *
 109  *      Omit those entries for boards you don't have installed.
 110  *
 111  *      TODO
 112  *              Merge testing
 113  *              64-bit verification
 114  */
 115
 116 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 117
 118 #include <linux/module.h>
 119 #include <linux/firmware.h>
 120 #include <linux/kernel.h>
 121 #include <linux/tty.h>
 122 #include <linux/tty_flip.h>
 123 #include <linux/termios.h>
 124 #include <linux/fs.h>
 125 #include <linux/sched.h>
 126 #include <linux/serial.h>
 127 #include <linux/mm.h>
 128 #include <linux/interrupt.h>
 129 #include <linux/timer.h>
 130 #include <linux/delay.h>
 131 #include <linux/ioport.h>
 132 #include <linux/slab.h>
 133
 134 #include <linux/uaccess.h>
 135 #include <linux/io.h>
 136 #include <asm/system.h>
 137
 138 #include <linux/pci.h>
 139
 140 #include <linux/isicom.h>
 141
 142 #define InterruptTheCard(base) outw(0, (base) + 0xc)
 143 #define ClearInterrupt(base) inw((base) + 0x0a)
 144
 145 #ifdef DEBUG
 146 #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
 147 #else
 148 #define isicom_paranoia_check(a, b, c) 0
 149 #endif
 150
 151 static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
 152 static void __devexit isicom_remove(struct pci_dev *);
 153
 154 static struct pci_device_id isicom_pci_tbl[] = {
 155         { PCI_DEVICE(VENDOR_ID, 0x2028) },
 156         { PCI_DEVICE(VENDOR_ID, 0x2051) },
 157         { PCI_DEVICE(VENDOR_ID, 0x2052) },
 158         { PCI_DEVICE(VENDOR_ID, 0x2053) },
 159         { PCI_DEVICE(VENDOR_ID, 0x2054) },
 160         { PCI_DEVICE(VENDOR_ID, 0x2055) },
 161         { PCI_DEVICE(VENDOR_ID, 0x2056) },
 162         { PCI_DEVICE(VENDOR_ID, 0x2057) },
 163         { PCI_DEVICE(VENDOR_ID, 0x2058) },
 164         { 0 }
 165 };
 166 MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
 167
 168 static struct pci_driver isicom_driver = {
 169         .name           = "isicom",
 170         .id_table       = isicom_pci_tbl,
 171         .probe          = isicom_probe,
 172         .remove         = __devexit_p(isicom_remove)
 173 };
 174
 175 static int prev_card = 3;       /*      start servicing isi_card[0]     */
 176 static struct tty_driver *isicom_normal;
 177
 178 static void isicom_tx(unsigned long _data);
 179 static void isicom_start(struct tty_struct *tty);
 180
 181 static DEFINE_TIMER(tx, isicom_tx, 0, 0);
 182
 183 /*   baud index mappings from linux defns to isi */
 184
 185 static signed char linuxb_to_isib[] = {
 186         -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21
 187 };
 188
 189 struct  isi_board {
 190         unsigned long           base;
 191         int                     irq;
 192         unsigned char           port_count;
 193         unsigned short          status;
 194         unsigned short          port_status; /* each bit for each port */
 195         unsigned short          shift_count;
 196         struct isi_port         *ports;
 197         signed char             count;
 198         spinlock_t              card_lock; /* Card wide lock 11/5/00 -sameer */
 199         unsigned long           flags;
 200         unsigned int            index;
 201 };
 202
 203 struct  isi_port {
 204         unsigned short          magic;
 205         struct tty_port         port;
 206         u16                     channel;
 207         u16                     status;
 208         struct isi_board        *card;
 209         unsigned char           *xmit_buf;
 210         int                     xmit_head;
 211         int                     xmit_tail;
 212         int                     xmit_cnt;
 213 };
 214
 215 static struct isi_board isi_card[BOARD_COUNT];
 216 static struct isi_port  isi_ports[PORT_COUNT];
 217
 218 /*
 219  *      Locking functions for card level locking. We need to own both
 220  *      the kernel lock for the card and have the card in a position that
 221  *      it wants to talk.
 222  */
 223
 224 static inline int WaitTillCardIsFree(unsigned long base)
 225 {
 226         unsigned int count = 0;
 227         unsigned int a = in_atomic(); /* do we run under spinlock? */
 228
 229         while (!(inw(base + 0xe) & 0x1) && count++ < 100)
 230                 if (a)
 231                         mdelay(1);
 232                 else
 233                         msleep(1);
 234
 235         return !(inw(base + 0xe) & 0x1);
 236 }
 237
 238 static int lock_card(struct isi_board *card)
 239 {
 240         unsigned long base = card->base;
 241         unsigned int retries, a;
 242
 243         for (retries = 0; retries < 10; retries++) {
 244                 spin_lock_irqsave(&card->card_lock, card->flags);
 245                 for (a = 0; a < 10; a++) {
 246                         if (inw(base + 0xe) & 0x1)
 247                                 return 1;
 248                         udelay(10);
 249                 }
 250                 spin_unlock_irqrestore(&card->card_lock, card->flags);
 251                 msleep(10);
 252         }
 253         pr_warning("Failed to lock Card (0x%lx)\n", card->base);
 254
 255         return 0;       /* Failed to acquire the card! */
 256 }
 257
 258 static void unlock_card(struct isi_board *card)
 259 {
 260         spin_unlock_irqrestore(&card->card_lock, card->flags);
 261 }
 262
 263 /*
 264  *  ISI Card specific ops ...
 265  */
 266
 267 /* card->lock HAS to be held */
 268 static void raise_dtr(struct isi_port *port)
 269 {
 270         struct isi_board *card = port->card;
 271         unsigned long base = card->base;
 272         u16 channel = port->channel;
 273
 274         if (WaitTillCardIsFree(base))
 275                 return;
 276
 277         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 278         outw(0x0504, base);
 279         InterruptTheCard(base);
 280         port->status |= ISI_DTR;
 281 }
 282
 283 /* card->lock HAS to be held */
 284 static inline void drop_dtr(struct isi_port *port)
 285 {
 286         struct isi_board *card = port->card;
 287         unsigned long base = card->base;
 288         u16 channel = port->channel;
 289
 290         if (WaitTillCardIsFree(base))
 291                 return;
 292
 293         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 294         outw(0x0404, base);
 295         InterruptTheCard(base);
 296         port->status &= ~ISI_DTR;
 297 }
 298
 299 /* card->lock HAS to be held */
 300 static inline void raise_rts(struct isi_port *port)
 301 {
 302         struct isi_board *card = port->card;
 303         unsigned long base = card->base;
 304         u16 channel = port->channel;
 305
 306         if (WaitTillCardIsFree(base))
 307                 return;
 308
 309         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 310         outw(0x0a04, base);
 311         InterruptTheCard(base);
 312         port->status |= ISI_RTS;
 313 }
 314
 315 /* card->lock HAS to be held */
 316 static inline void drop_rts(struct isi_port *port)
 317 {
 318         struct isi_board *card = port->card;
 319         unsigned long base = card->base;
 320         u16 channel = port->channel;
 321
 322         if (WaitTillCardIsFree(base))
 323                 return;
 324
 325         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 326         outw(0x0804, base);
 327         InterruptTheCard(base);
 328         port->status &= ~ISI_RTS;
 329 }
 330
 331 /* card->lock MUST NOT be held */
 332
 333 static void isicom_dtr_rts(struct tty_port *port, int on)
 334 {
 335         struct isi_port *ip = container_of(port, struct isi_port, port);
 336         struct isi_board *card = ip->card;
 337         unsigned long base = card->base;
 338         u16 channel = ip->channel;
 339
 340         if (!lock_card(card))
 341                 return;
 342
 343         if (on) {
 344                 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 345                 outw(0x0f04, base);
 346                 InterruptTheCard(base);
 347                 ip->status |= (ISI_DTR | ISI_RTS);
 348         } else {
 349                 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 350                 outw(0x0C04, base);
 351                 InterruptTheCard(base);
 352                 ip->status &= ~(ISI_DTR | ISI_RTS);
 353         }
 354         unlock_card(card);
 355 }
 356
 357 /* card->lock HAS to be held */
 358 static void drop_dtr_rts(struct isi_port *port)
 359 {
 360         struct isi_board *card = port->card;
 361         unsigned long base = card->base;
 362         u16 channel = port->channel;
 363
 364         if (WaitTillCardIsFree(base))
 365                 return;
 366
 367         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 368         outw(0x0c04, base);
 369         InterruptTheCard(base);
 370         port->status &= ~(ISI_RTS | ISI_DTR);
 371 }
 372
 373 /*
 374  *      ISICOM Driver specific routines ...
 375  *
 376  */
 377
 378 static inline int __isicom_paranoia_check(struct isi_port const *port,
 379         char *name, const char *routine)
 380 {
 381         if (!port) {
 382                 pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
 383                            name, routine);
 384                 return 1;
 385         }
 386         if (port->magic != ISICOM_MAGIC) {
 387                 pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
 388                            name, routine);
 389                 return 1;
 390         }
 391
 392         return 0;
 393 }
 394
 395 /*
 396  *      Transmitter.
 397  *
 398  *      We shovel data into the card buffers on a regular basis. The card
 399  *      will do the rest of the work for us.
 400  */
 401
 402 static void isicom_tx(unsigned long _data)
 403 {
 404         unsigned long flags, base;
 405         unsigned int retries;
 406         short count = (BOARD_COUNT-1), card;
 407         short txcount, wrd, residue, word_count, cnt;
 408         struct isi_port *port;
 409         struct tty_struct *tty;
 410
 411         /*      find next active board  */
 412         card = (prev_card + 1) & 0x0003;
 413         while (count-- > 0) {
 414                 if (isi_card[card].status & BOARD_ACTIVE)
 415                         break;
 416                 card = (card + 1) & 0x0003;
 417         }
 418         if (!(isi_card[card].status & BOARD_ACTIVE))
 419                 goto sched_again;
 420
 421         prev_card = card;
 422
 423         count = isi_card[card].port_count;
 424         port = isi_card[card].ports;
 425         base = isi_card[card].base;
 426
 427         spin_lock_irqsave(&isi_card[card].card_lock, flags);
 428         for (retries = 0; retries < 100; retries++) {
 429                 if (inw(base + 0xe) & 0x1)
 430                         break;
 431                 udelay(2);
 432         }
 433         if (retries >= 100)
 434                 goto unlock;
 435
 436         tty = tty_port_tty_get(&port->port);
 437         if (tty == NULL)
 438                 goto put_unlock;
 439
 440         for (; count > 0; count--, port++) {
 441                 /* port not active or tx disabled to force flow control */
 442                 if (!(port->port.flags & ASYNC_INITIALIZED) ||
 443                                 !(port->status & ISI_TXOK))
 444                         continue;
 445
 446                 txcount = min_t(short, TX_SIZE, port->xmit_cnt);
 447                 if (txcount <= 0 || tty->stopped || tty->hw_stopped)
 448                         continue;
 449
 450                 if (!(inw(base + 0x02) & (1 << port->channel)))
 451                         continue;
 452
 453                 pr_debug("txing %d bytes, port%d.\n",
 454                          txcount, port->channel + 1);
 455                 outw((port->channel << isi_card[card].shift_count) | txcount,
 456                         base);
 457                 residue = NO;
 458                 wrd = 0;
 459                 while (1) {
 460                         cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
 461                                         - port->xmit_tail));
 462                         if (residue == YES) {
 463                                 residue = NO;
 464                                 if (cnt > 0) {
 465                                         wrd |= (port->port.xmit_buf[port->xmit_tail]
 466                                                                         << 8);
 467                                         port->xmit_tail = (port->xmit_tail + 1)
 468                                                 & (SERIAL_XMIT_SIZE - 1);
 469                                         port->xmit_cnt--;
 470                                         txcount--;
 471                                         cnt--;
 472                                         outw(wrd, base);
 473                                 } else {
 474                                         outw(wrd, base);
 475                                         break;
 476                                 }
 477                         }
 478                         if (cnt <= 0)
 479                                 break;
 480                         word_count = cnt >> 1;
 481                         outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
 482                         port->xmit_tail = (port->xmit_tail
 483                                 + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
 484                         txcount -= (word_count << 1);
 485                         port->xmit_cnt -= (word_count << 1);
 486                         if (cnt & 0x0001) {
 487                                 residue = YES;
 488                                 wrd = port->port.xmit_buf[port->xmit_tail];
 489                                 port->xmit_tail = (port->xmit_tail + 1)
 490                                         & (SERIAL_XMIT_SIZE - 1);
 491                                 port->xmit_cnt--;
 492                                 txcount--;
 493                         }
 494                 }
 495
 496                 InterruptTheCard(base);
 497                 if (port->xmit_cnt <= 0)
 498                         port->status &= ~ISI_TXOK;
 499                 if (port->xmit_cnt <= WAKEUP_CHARS)
 500                         tty_wakeup(tty);
 501         }
 502
 503 put_unlock:
 504         tty_kref_put(tty);
 505 unlock:
 506         spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
 507         /*      schedule another tx for hopefully in about 10ms */
 508 sched_again:
 509         mod_timer(&tx, jiffies + msecs_to_jiffies(10));
 510 }
 511
 512 /*
 513  *      Main interrupt handler routine
 514  */
 515
 516 static irqreturn_t isicom_interrupt(int irq, void *dev_id)
 517 {
 518         struct isi_board *card = dev_id;
 519         struct isi_port *port;
 520         struct tty_struct *tty;
 521         unsigned long base;
 522         u16 header, word_count, count, channel;
 523         short byte_count;
 524         unsigned char *rp;
 525
 526         if (!card || !(card->status & FIRMWARE_LOADED))
 527                 return IRQ_NONE;
 528
 529         base = card->base;
 530
 531         /* did the card interrupt us? */
 532         if (!(inw(base + 0x0e) & 0x02))
 533                 return IRQ_NONE;
 534
 535         spin_lock(&card->card_lock);
 536
 537         /*
 538          * disable any interrupts from the PCI card and lower the
 539          * interrupt line
 540          */
 541         outw(0x8000, base+0x04);
 542         ClearInterrupt(base);
 543
 544         inw(base);              /* get the dummy word out */
 545         header = inw(base);
 546         channel = (header & 0x7800) >> card->shift_count;
 547         byte_count = header & 0xff;
 548
 549         if (channel + 1 > card->port_count) {
 550                 pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
 551                            __func__, base, channel+1);
 552                 outw(0x0000, base+0x04); /* enable interrupts */
 553                 spin_unlock(&card->card_lock);
 554                 return IRQ_HANDLED;
 555         }
 556         port = card->ports + channel;
 557         if (!(port->port.flags & ASYNC_INITIALIZED)) {
 558                 outw(0x0000, base+0x04); /* enable interrupts */
 559                 spin_unlock(&card->card_lock);
 560                 return IRQ_HANDLED;
 561         }
 562
 563         tty = tty_port_tty_get(&port->port);
 564         if (tty == NULL) {
 565                 word_count = byte_count >> 1;
 566                 while (byte_count > 1) {
 567                         inw(base);
 568                         byte_count -= 2;
 569                 }
 570                 if (byte_count & 0x01)
 571                         inw(base);
 572                 outw(0x0000, base+0x04); /* enable interrupts */
 573                 spin_unlock(&card->card_lock);
 574                 return IRQ_HANDLED;
 575         }
 576
 577         if (header & 0x8000) {          /* Status Packet */
 578                 header = inw(base);
 579                 switch (header & 0xff) {
 580                 case 0: /* Change in EIA signals */
 581                         if (port->port.flags & ASYNC_CHECK_CD) {
 582                                 if (port->status & ISI_DCD) {
 583                                         if (!(header & ISI_DCD)) {
 584                                         /* Carrier has been lost  */
 585                                                 pr_debug("%s: DCD->low.\n",
 586                                                          __func__);
 587                                                 port->status &= ~ISI_DCD;
 588                                                 tty_hangup(tty);
 589                                         }
 590                                 } else if (header & ISI_DCD) {
 591                                 /* Carrier has been detected */
 592                                         pr_debug("%s: DCD->high.\n",
 593                                                 __func__);
 594                                         port->status |= ISI_DCD;
 595                                         wake_up_interruptible(&port->port.open_wait);
 596                                 }
 597                         } else {
 598                                 if (header & ISI_DCD)
 599                                         port->status |= ISI_DCD;
 600                                 else
 601                                         port->status &= ~ISI_DCD;
 602                         }
 603
 604                         if (port->port.flags & ASYNC_CTS_FLOW) {
 605                                 if (tty->hw_stopped) {
 606                                         if (header & ISI_CTS) {
 607                                                 port->port.tty->hw_stopped = 0;
 608                                                 /* start tx ing */
 609                                                 port->status |= (ISI_TXOK
 610                                                         | ISI_CTS);
 611                                                 tty_wakeup(tty);
 612                                         }
 613                                 } else if (!(header & ISI_CTS)) {
 614                                         tty->hw_stopped = 1;
 615                                         /* stop tx ing */
 616                                         port->status &= ~(ISI_TXOK | ISI_CTS);
 617                                 }
 618                         } else {
 619                                 if (header & ISI_CTS)
 620                                         port->status |= ISI_CTS;
 621                                 else
 622                                         port->status &= ~ISI_CTS;
 623                         }
 624
 625                         if (header & ISI_DSR)
 626                                 port->status |= ISI_DSR;
 627                         else
 628                                 port->status &= ~ISI_DSR;
 629
 630                         if (header & ISI_RI)
 631                                 port->status |= ISI_RI;
 632                         else
 633                                 port->status &= ~ISI_RI;
 634
 635                         break;
 636
 637                 case 1: /* Received Break !!! */
 638                         tty_insert_flip_char(tty, 0, TTY_BREAK);
 639                         if (port->port.flags & ASYNC_SAK)
 640                                 do_SAK(tty);
 641                         tty_flip_buffer_push(tty);
 642                         break;
 643
 644                 case 2: /* Statistics            */
 645                         pr_debug("%s: stats!!!\n", __func__);
 646                         break;
 647
 648                 default:
 649                         pr_debug("%s: Unknown code in status packet.\n",
 650                                  __func__);
 651                         break;
 652                 }
 653         } else {                                /* Data   Packet */
 654
 655                 count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
 656                 pr_debug("%s: Can rx %d of %d bytes.\n",
 657                          __func__, count, byte_count);
 658                 word_count = count >> 1;
 659                 insw(base, rp, word_count);
 660                 byte_count -= (word_count << 1);
 661                 if (count & 0x0001) {
 662                         tty_insert_flip_char(tty,  inw(base) & 0xff,
 663                                 TTY_NORMAL);
 664                         byte_count -= 2;
 665                 }
 666                 if (byte_count > 0) {
 667                         pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
 668                                  __func__, base, channel + 1);
 669                 /* drain out unread xtra data */
 670                 while (byte_count > 0) {
 671                                 inw(base);
 672                                 byte_count -= 2;
 673                         }
 674                 }
 675                 tty_flip_buffer_push(tty);
 676         }
 677         outw(0x0000, base+0x04); /* enable interrupts */
 678         spin_unlock(&card->card_lock);
 679         tty_kref_put(tty);
 680
 681         return IRQ_HANDLED;
 682 }
 683
 684 static void isicom_config_port(struct tty_struct *tty)
 685 {
 686         struct isi_port *port = tty->driver_data;
 687         struct isi_board *card = port->card;
 688         unsigned long baud;
 689         unsigned long base = card->base;
 690         u16 channel_setup, channel = port->channel,
 691                 shift_count = card->shift_count;
 692         unsigned char flow_ctrl;
 693
 694         /* FIXME: Switch to new tty baud API */
 695         baud = C_BAUD(tty);
 696         if (baud & CBAUDEX) {
 697                 baud &= ~CBAUDEX;
 698
 699                 /*  if CBAUDEX bit is on and the baud is set to either 50 or 75
 700                  *  then the card is programmed for 57.6Kbps or 115Kbps
 701                  *  respectively.
 702                  */
 703
 704                 /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
 705                 if (baud < 1 || baud > 4)
 706                         tty->termios->c_cflag &= ~CBAUDEX;
 707                 else
 708                         baud += 15;
 709         }
 710         if (baud == 15) {
 711
 712                 /*  the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
 713                  *  by the set_serial_info ioctl ... this is done by
 714                  *  the 'setserial' utility.
 715                  */
 716
 717                 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
 718                         baud++; /*  57.6 Kbps */
 719                 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
 720                         baud += 2; /*  115  Kbps */
 721                 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
 722                         baud += 3; /* 230 kbps*/
 723                 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
 724                         baud += 4; /* 460 kbps*/
 725         }
 726         if (linuxb_to_isib[baud] == -1) {
 727                 /* hang up */
 728                 drop_dtr(port);
 729                 return;
 730         } else
 731                 raise_dtr(port);
 732
 733         if (WaitTillCardIsFree(base) == 0) {
 734                 outw(0x8000 | (channel << shift_count) | 0x03, base);
 735                 outw(linuxb_to_isib[baud] << 8 | 0x03, base);
 736                 channel_setup = 0;
 737                 switch (C_CSIZE(tty)) {
 738                 case CS5:
 739                         channel_setup |= ISICOM_CS5;
 740                         break;
 741                 case CS6:
 742                         channel_setup |= ISICOM_CS6;
 743                         break;
 744                 case CS7:
 745                         channel_setup |= ISICOM_CS7;
 746                         break;
 747                 case CS8:
 748                         channel_setup |= ISICOM_CS8;
 749                         break;
 750                 }
 751
 752                 if (C_CSTOPB(tty))
 753                         channel_setup |= ISICOM_2SB;
 754                 if (C_PARENB(tty)) {
 755                         channel_setup |= ISICOM_EVPAR;
 756                         if (C_PARODD(tty))
 757                                 channel_setup |= ISICOM_ODPAR;
 758                 }
 759                 outw(channel_setup, base);
 760                 InterruptTheCard(base);
 761         }
 762         if (C_CLOCAL(tty))
 763                 port->port.flags &= ~ASYNC_CHECK_CD;
 764         else
 765                 port->port.flags |= ASYNC_CHECK_CD;
 766
 767         /* flow control settings ...*/
 768         flow_ctrl = 0;
 769         port->port.flags &= ~ASYNC_CTS_FLOW;
 770         if (C_CRTSCTS(tty)) {
 771                 port->port.flags |= ASYNC_CTS_FLOW;
 772                 flow_ctrl |= ISICOM_CTSRTS;
 773         }
 774         if (I_IXON(tty))
 775                 flow_ctrl |= ISICOM_RESPOND_XONXOFF;
 776         if (I_IXOFF(tty))
 777                 flow_ctrl |= ISICOM_INITIATE_XONXOFF;
 778
 779         if (WaitTillCardIsFree(base) == 0) {
 780                 outw(0x8000 | (channel << shift_count) | 0x04, base);
 781                 outw(flow_ctrl << 8 | 0x05, base);
 782                 outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
 783                 InterruptTheCard(base);
 784         }
 785
 786         /*      rx enabled -> enable port for rx on the card    */
 787         if (C_CREAD(tty)) {
 788                 card->port_status |= (1 << channel);
 789                 outw(card->port_status, base + 0x02);
 790         }
 791 }
 792
 793 /* open et all */
 794
 795 static inline void isicom_setup_board(struct isi_board *bp)
 796 {
 797         int channel;
 798         struct isi_port *port;
 799
 800         bp->count++;
 801         if (!(bp->status & BOARD_INIT)) {
 802                 port = bp->ports;
 803                 for (channel = 0; channel < bp->port_count; channel++, port++)
 804                         drop_dtr_rts(port);
 805         }
 806         bp->status |= BOARD_ACTIVE | BOARD_INIT;
 807 }
 808
 809 /* Activate and thus setup board are protected from races against shutdown
 810    by the tty_port mutex */
 811
 812 static int isicom_activate(struct tty_port *tport, struct tty_struct *tty)
 813 {
 814         struct isi_port *port = container_of(tport, struct isi_port, port);
 815         struct isi_board *card = port->card;
 816         unsigned long flags;
 817
 818         if (tty_port_alloc_xmit_buf(tport) < 0)
 819                 return -ENOMEM;
 820
 821         spin_lock_irqsave(&card->card_lock, flags);
 822         isicom_setup_board(card);
 823
 824         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 825
 826         /*      discard any residual data       */
 827         if (WaitTillCardIsFree(card->base) == 0) {
 828                 outw(0x8000 | (port->channel << card->shift_count) | 0x02,
 829                                 card->base);
 830                 outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
 831                 InterruptTheCard(card->base);
 832         }
 833         isicom_config_port(tty);
 834         spin_unlock_irqrestore(&card->card_lock, flags);
 835
 836         return 0;
 837 }
 838
 839 static int isicom_carrier_raised(struct tty_port *port)
 840 {
 841         struct isi_port *ip = container_of(port, struct isi_port, port);
 842         return (ip->status & ISI_DCD)?1 : 0;
 843 }
 844
 845 static struct tty_port *isicom_find_port(struct tty_struct *tty)
 846 {
 847         struct isi_port *port;
 848         struct isi_board *card;
 849         unsigned int board;
 850         int line = tty->index;
 851
 852         board = BOARD(line);
 853         card = &isi_card[board];
 854
 855         if (!(card->status & FIRMWARE_LOADED))
 856                 return NULL;
 857
 858         /*  open on a port greater than the port count for the card !!! */
 859         if (line > ((board * 16) + card->port_count - 1))
 860                 return NULL;
 861
 862         port = &isi_ports[line];
 863         if (isicom_paranoia_check(port, tty->name, "isicom_open"))
 864                 return NULL;
 865
 866         return &port->port;
 867 }
 868
 869 static int isicom_open(struct tty_struct *tty, struct file *filp)
 870 {
 871         struct isi_port *port;
 872         struct tty_port *tport;
 873
 874         tport = isicom_find_port(tty);
 875         if (tport == NULL)
 876                 return -ENODEV;
 877         port = container_of(tport, struct isi_port, port);
 878
 879         tty->driver_data = port;
 880         return tty_port_open(tport, tty, filp);
 881 }
 882
 883 /* close et all */
 884
 885 /* card->lock HAS to be held */
 886 static void isicom_shutdown_port(struct isi_port *port)
 887 {
 888         struct isi_board *card = port->card;
 889
 890         if (--card->count < 0) {
 891                 pr_debug("%s: bad board(0x%lx) count %d.\n",
 892                          __func__, card->base, card->count);
 893                 card->count = 0;
 894         }
 895         /* last port was closed, shutdown that board too */
 896         if (!card->count)
 897                 card->status &= BOARD_ACTIVE;
 898 }
 899
 900 static void isicom_flush_buffer(struct tty_struct *tty)
 901 {
 902         struct isi_port *port = tty->driver_data;
 903         struct isi_board *card = port->card;
 904         unsigned long flags;
 905
 906         if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
 907                 return;
 908
 909         spin_lock_irqsave(&card->card_lock, flags);
 910         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 911         spin_unlock_irqrestore(&card->card_lock, flags);
 912
 913         tty_wakeup(tty);
 914 }
 915
 916 static void isicom_shutdown(struct tty_port *port)
 917 {
 918         struct isi_port *ip = container_of(port, struct isi_port, port);
 919         struct isi_board *card = ip->card;
 920         unsigned long flags;
 921
 922         /* indicate to the card that no more data can be received
 923            on this port */
 924         spin_lock_irqsave(&card->card_lock, flags);
 925         card->port_status &= ~(1 << ip->channel);
 926         outw(card->port_status, card->base + 0x02);
 927         isicom_shutdown_port(ip);
 928         spin_unlock_irqrestore(&card->card_lock, flags);
 929         tty_port_free_xmit_buf(port);
 930 }
 931
 932 static void isicom_close(struct tty_struct *tty, struct file *filp)
 933 {
 934         struct isi_port *ip = tty->driver_data;
 935         struct tty_port *port;
 936
 937         if (ip == NULL)
 938                 return;
 939
 940         port = &ip->port;
 941         if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
 942                 return;
 943         tty_port_close(port, tty, filp);
 944 }
 945
 946 /* write et all */
 947 static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
 948         int count)
 949 {
 950         struct isi_port *port = tty->driver_data;
 951         struct isi_board *card = port->card;
 952         unsigned long flags;
 953         int cnt, total = 0;
 954
 955         if (isicom_paranoia_check(port, tty->name, "isicom_write"))
 956                 return 0;
 957
 958         spin_lock_irqsave(&card->card_lock, flags);
 959
 960         while (1) {
 961                 cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
 962                                 - 1, SERIAL_XMIT_SIZE - port->xmit_head));
 963                 if (cnt <= 0)
 964                         break;
 965
 966                 memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
 967                 port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
 968                         - 1);
 969                 port->xmit_cnt += cnt;
 970                 buf += cnt;
 971                 count -= cnt;
 972                 total += cnt;
 973         }
 974         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
 975                 port->status |= ISI_TXOK;
 976         spin_unlock_irqrestore(&card->card_lock, flags);
 977         return total;
 978 }
 979
 980 /* put_char et all */
 981 static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
 982 {
 983         struct isi_port *port = tty->driver_data;
 984         struct isi_board *card = port->card;
 985         unsigned long flags;
 986
 987         if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
 988                 return 0;
 989
 990         spin_lock_irqsave(&card->card_lock, flags);
 991         if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
 992                 spin_unlock_irqrestore(&card->card_lock, flags);
 993                 return 0;
 994         }
 995
 996         port->port.xmit_buf[port->xmit_head++] = ch;
 997         port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
 998         port->xmit_cnt++;
 999         spin_unlock_irqrestore(&card->card_lock, flags);
1000         return 1;
1001 }
1002
1003 /* flush_chars et all */
1004 static void isicom_flush_chars(struct tty_struct *tty)
1005 {
1006         struct isi_port *port = tty->driver_data;
1007
1008         if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
1009                 return;
1010
1011         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1012                         !port->port.xmit_buf)
1013                 return;
1014
1015         /* this tells the transmitter to consider this port for
1016            data output to the card ... that's the best we can do. */
1017         port->status |= ISI_TXOK;
1018 }
1019
1020 /* write_room et all */
1021 static int isicom_write_room(struct tty_struct *tty)
1022 {
1023         struct isi_port *port = tty->driver_data;
1024         int free;
1025
1026         if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
1027                 return 0;
1028
1029         free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1030         if (free < 0)
1031                 free = 0;
1032         return free;
1033 }
1034
1035 /* chars_in_buffer et all */
1036 static int isicom_chars_in_buffer(struct tty_struct *tty)
1037 {
1038         struct isi_port *port = tty->driver_data;
1039         if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
1040                 return 0;
1041         return port->xmit_cnt;
1042 }
1043
1044 /* ioctl et all */
1045 static int isicom_send_break(struct tty_struct *tty, int length)
1046 {
1047         struct isi_port *port = tty->driver_data;
1048         struct isi_board *card = port->card;
1049         unsigned long base = card->base;
1050
1051         if (length == -1)
1052                 return -EOPNOTSUPP;
1053
1054         if (!lock_card(card))
1055                 return -EINVAL;
1056
1057         outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
1058         outw((length & 0xff) << 8 | 0x00, base);
1059         outw((length & 0xff00), base);
1060         InterruptTheCard(base);
1061
1062         unlock_card(card);
1063         return 0;
1064 }
1065
1066 static int isicom_tiocmget(struct tty_struct *tty)
1067 {
1068         struct isi_port *port = tty->driver_data;
1069         /* just send the port status */
1070         u16 status = port->status;
1071
1072         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1073                 return -ENODEV;
1074
1075         return  ((status & ISI_RTS) ? TIOCM_RTS : 0) |
1076                 ((status & ISI_DTR) ? TIOCM_DTR : 0) |
1077                 ((status & ISI_DCD) ? TIOCM_CAR : 0) |
1078                 ((status & ISI_DSR) ? TIOCM_DSR : 0) |
1079                 ((status & ISI_CTS) ? TIOCM_CTS : 0) |
1080                 ((status & ISI_RI ) ? TIOCM_RI  : 0);
1081 }
1082
1083 static int isicom_tiocmset(struct tty_struct *tty,
1084                                         unsigned int set, unsigned int clear)
1085 {
1086         struct isi_port *port = tty->driver_data;
1087         unsigned long flags;
1088
1089         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1090                 return -ENODEV;
1091
1092         spin_lock_irqsave(&port->card->card_lock, flags);
1093         if (set & TIOCM_RTS)
1094                 raise_rts(port);
1095         if (set & TIOCM_DTR)
1096                 raise_dtr(port);
1097
1098         if (clear & TIOCM_RTS)
1099                 drop_rts(port);
1100         if (clear & TIOCM_DTR)
1101                 drop_dtr(port);
1102         spin_unlock_irqrestore(&port->card->card_lock, flags);
1103
1104         return 0;
1105 }
1106
1107 static int isicom_set_serial_info(struct tty_struct *tty,
1108                                         struct serial_struct __user *info)
1109 {
1110         struct isi_port *port = tty->driver_data;
1111         struct serial_struct newinfo;
1112         int reconfig_port;
1113
1114         if (copy_from_user(&newinfo, info, sizeof(newinfo)))
1115                 return -EFAULT;
1116
1117         mutex_lock(&port->port.mutex);
1118         reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
1119                 (newinfo.flags & ASYNC_SPD_MASK));
1120
1121         if (!capable(CAP_SYS_ADMIN)) {
1122                 if ((newinfo.close_delay != port->port.close_delay) ||
1123                                 (newinfo.closing_wait != port->port.closing_wait) ||
1124                                 ((newinfo.flags & ~ASYNC_USR_MASK) !=
1125                                 (port->port.flags & ~ASYNC_USR_MASK))) {
1126                         mutex_unlock(&port->port.mutex);
1127                         return -EPERM;
1128                 }
1129                 port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
1130                                 (newinfo.flags & ASYNC_USR_MASK));
1131         } else {
1132                 port->port.close_delay = newinfo.close_delay;
1133                 port->port.closing_wait = newinfo.closing_wait;
1134                 port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
1135                                 (newinfo.flags & ASYNC_FLAGS));
1136         }
1137         if (reconfig_port) {
1138                 unsigned long flags;
1139                 spin_lock_irqsave(&port->card->card_lock, flags);
1140                 isicom_config_port(tty);
1141                 spin_unlock_irqrestore(&port->card->card_lock, flags);
1142         }
1143         mutex_unlock(&port->port.mutex);
1144         return 0;
1145 }
1146
1147 static int isicom_get_serial_info(struct isi_port *port,
1148         struct serial_struct __user *info)
1149 {
1150         struct serial_struct out_info;
1151
1152         mutex_lock(&port->port.mutex);
1153         memset(&out_info, 0, sizeof(out_info));
1154 /*      out_info.type = ? */
1155         out_info.line = port - isi_ports;
1156         out_info.port = port->card->base;
1157         out_info.irq = port->card->irq;
1158         out_info.flags = port->port.flags;
1159 /*      out_info.baud_base = ? */
1160         out_info.close_delay = port->port.close_delay;
1161         out_info.closing_wait = port->port.closing_wait;
1162         mutex_unlock(&port->port.mutex);
1163         if (copy_to_user(info, &out_info, sizeof(out_info)))
1164                 return -EFAULT;
1165         return 0;
1166 }
1167
1168 static int isicom_ioctl(struct tty_struct *tty,
1169         unsigned int cmd, unsigned long arg)
1170 {
1171         struct isi_port *port = tty->driver_data;
1172         void __user *argp = (void __user *)arg;
1173
1174         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1175                 return -ENODEV;
1176
1177         switch (cmd) {
1178         case TIOCGSERIAL:
1179                 return isicom_get_serial_info(port, argp);
1180
1181         case TIOCSSERIAL:
1182                 return isicom_set_serial_info(tty, argp);
1183
1184         default:
1185                 return -ENOIOCTLCMD;
1186         }
1187         return 0;
1188 }
1189
1190 /* set_termios et all */
1191 static void isicom_set_termios(struct tty_struct *tty,
1192         struct ktermios *old_termios)
1193 {
1194         struct isi_port *port = tty->driver_data;
1195         unsigned long flags;
1196
1197         if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
1198                 return;
1199
1200         if (tty->termios->c_cflag == old_termios->c_cflag &&
1201                         tty->termios->c_iflag == old_termios->c_iflag)
1202                 return;
1203
1204         spin_lock_irqsave(&port->card->card_lock, flags);
1205         isicom_config_port(tty);
1206         spin_unlock_irqrestore(&port->card->card_lock, flags);
1207
1208         if ((old_termios->c_cflag & CRTSCTS) &&
1209                         !(tty->termios->c_cflag & CRTSCTS)) {
1210                 tty->hw_stopped = 0;
1211                 isicom_start(tty);
1212         }
1213 }
1214
1215 /* throttle et all */
1216 static void isicom_throttle(struct tty_struct *tty)
1217 {
1218         struct isi_port *port = tty->driver_data;
1219         struct isi_board *card = port->card;
1220
1221         if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
1222                 return;
1223
1224         /* tell the card that this port cannot handle any more data for now */
1225         card->port_status &= ~(1 << port->channel);
1226         outw(card->port_status, card->base + 0x02);
1227 }
1228
1229 /* unthrottle et all */
1230 static void isicom_unthrottle(struct tty_struct *tty)
1231 {
1232         struct isi_port *port = tty->driver_data;
1233         struct isi_board *card = port->card;
1234
1235         if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
1236                 return;
1237
1238         /* tell the card that this port is ready to accept more data */
1239         card->port_status |= (1 << port->channel);
1240         outw(card->port_status, card->base + 0x02);
1241 }
1242
1243 /* stop et all */
1244 static void isicom_stop(struct tty_struct *tty)
1245 {
1246         struct isi_port *port = tty->driver_data;
1247
1248         if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
1249                 return;
1250
1251         /* this tells the transmitter not to consider this port for
1252            data output to the card. */
1253         port->status &= ~ISI_TXOK;
1254 }
1255
1256 /* start et all */
1257 static void isicom_start(struct tty_struct *tty)
1258 {
1259         struct isi_port *port = tty->driver_data;
1260
1261         if (isicom_paranoia_check(port, tty->name, "isicom_start"))
1262                 return;
1263
1264         /* this tells the transmitter to consider this port for
1265            data output to the card. */
1266         port->status |= ISI_TXOK;
1267 }
1268
1269 static void isicom_hangup(struct tty_struct *tty)
1270 {
1271         struct isi_port *port = tty->driver_data;
1272
1273         if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
1274                 return;
1275         tty_port_hangup(&port->port);
1276 }
1277
1278
1279 /*
1280  * Driver init and deinit functions
1281  */
1282
1283 static const struct tty_operations isicom_ops = {
1284         .open                   = isicom_open,
1285         .close                  = isicom_close,
1286         .write                  = isicom_write,
1287         .put_char               = isicom_put_char,
1288         .flush_chars            = isicom_flush_chars,
1289         .write_room             = isicom_write_room,
1290         .chars_in_buffer        = isicom_chars_in_buffer,
1291         .ioctl                  = isicom_ioctl,
1292         .set_termios            = isicom_set_termios,
1293         .throttle               = isicom_throttle,
1294         .unthrottle             = isicom_unthrottle,
1295         .stop                   = isicom_stop,
1296         .start                  = isicom_start,
1297         .hangup                 = isicom_hangup,
1298         .flush_buffer           = isicom_flush_buffer,
1299         .tiocmget               = isicom_tiocmget,
1300         .tiocmset               = isicom_tiocmset,
1301         .break_ctl              = isicom_send_break,
1302 };
1303
1304 static const struct tty_port_operations isicom_port_ops = {
1305         .carrier_raised         = isicom_carrier_raised,
1306         .dtr_rts                = isicom_dtr_rts,
1307         .activate               = isicom_activate,
1308         .shutdown               = isicom_shutdown,
1309 };
1310
1311 static int __devinit reset_card(struct pci_dev *pdev,
1312         const unsigned int card, unsigned int *signature)
1313 {
1314         struct isi_board *board = pci_get_drvdata(pdev);
1315         unsigned long base = board->base;
1316         unsigned int sig, portcount = 0;
1317         int retval = 0;
1318
1319         dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
1320                 base);
1321
1322         inw(base + 0x8);
1323
1324         msleep(10);
1325
1326         outw(0, base + 0x8); /* Reset */
1327
1328         msleep(1000);
1329
1330         sig = inw(base + 0x4) & 0xff;
1331
1332         if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd &&
1333                         sig != 0xee) {
1334                 dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible "
1335                         "bad I/O Port Address 0x%lx).\n", card + 1, base);
1336                 dev_dbg(&pdev->dev, "Sig=0x%x\n", sig);
1337                 retval = -EIO;
1338                 goto end;
1339         }
1340
1341         msleep(10);
1342
1343         portcount = inw(base + 0x2);
1344         if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
1345                                 portcount != 8 && portcount != 16)) {
1346                 dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
1347                         card + 1);
1348                 retval = -EIO;
1349                 goto end;
1350         }
1351
1352         switch (sig) {
1353         case 0xa5:
1354         case 0xbb:
1355         case 0xdd:
1356                 board->port_count = (portcount == 4) ? 4 : 8;
1357                 board->shift_count = 12;
1358                 break;
1359         case 0xcc:
1360         case 0xee:
1361                 board->port_count = 16;
1362                 board->shift_count = 11;
1363                 break;
1364         }
1365         dev_info(&pdev->dev, "-Done\n");
1366         *signature = sig;
1367
1368 end:
1369         return retval;
1370 }
1371
1372 static int __devinit load_firmware(struct pci_dev *pdev,
1373         const unsigned int index, const unsigned int signature)
1374 {
1375         struct isi_board *board = pci_get_drvdata(pdev);
1376         const struct firmware *fw;
1377         unsigned long base = board->base;
1378         unsigned int a;
1379         u16 word_count, status;
1380         int retval = -EIO;
1381         char *name;
1382         u8 *data;
1383
1384         struct stframe {
1385                 u16     addr;
1386                 u16     count;
1387                 u8      data[0];
1388         } *frame;
1389
1390         switch (signature) {
1391         case 0xa5:
1392                 name = "isi608.bin";
1393                 break;
1394         case 0xbb:
1395                 name = "isi608em.bin";
1396                 break;
1397         case 0xcc:
1398                 name = "isi616em.bin";
1399                 break;
1400         case 0xdd:
1401                 name = "isi4608.bin";
1402                 break;
1403         case 0xee:
1404                 name = "isi4616.bin";
1405                 break;
1406         default:
1407                 dev_err(&pdev->dev, "Unknown signature.\n");
1408                 goto end;
1409         }
1410
1411         retval = request_firmware(&fw, name, &pdev->dev);
1412         if (retval)
1413                 goto end;
1414
1415         retval = -EIO;
1416
1417         for (frame = (struct stframe *)fw->data;
1418                         frame < (struct stframe *)(fw->data + fw->size);
1419                         frame = (struct stframe *)((u8 *)(frame + 1) +
1420                                 frame->count)) {
1421                 if (WaitTillCardIsFree(base))
1422                         goto errrelfw;
1423
1424                 outw(0xf0, base);       /* start upload sequence */
1425                 outw(0x00, base);
1426                 outw(frame->addr, base); /* lsb of address */
1427
1428                 word_count = frame->count / 2 + frame->count % 2;
1429                 outw(word_count, base);
1430                 InterruptTheCard(base);
1431
1432                 udelay(100); /* 0x2f */
1433
1434                 if (WaitTillCardIsFree(base))
1435                         goto errrelfw;
1436
1437                 status = inw(base + 0x4);
1438                 if (status != 0) {
1439                         dev_warn(&pdev->dev, "Card%d rejected load header:\n"
1440                                  "Address:0x%x\n"
1441                                  "Count:0x%x\n"
1442                                  "Status:0x%x\n",
1443                                  index + 1, frame->addr, frame->count, status);
1444                         goto errrelfw;
1445                 }
1446                 outsw(base, frame->data, word_count);
1447
1448                 InterruptTheCard(base);
1449
1450                 udelay(50); /* 0x0f */
1451
1452                 if (WaitTillCardIsFree(base))
1453                         goto errrelfw;
1454
1455                 status = inw(base + 0x4);
1456                 if (status != 0) {
1457                         dev_err(&pdev->dev, "Card%d got out of sync.Card "
1458                                 "Status:0x%x\n", index + 1, status);
1459                         goto errrelfw;
1460                 }
1461         }
1462
1463 /* XXX: should we test it by reading it back and comparing with original like
1464  * in load firmware package? */
1465         for (frame = (struct stframe *)fw->data;
1466                         frame < (struct stframe *)(fw->data + fw->size);
1467                         frame = (struct stframe *)((u8 *)(frame + 1) +
1468                                 frame->count)) {
1469                 if (WaitTillCardIsFree(base))
1470                         goto errrelfw;
1471
1472                 outw(0xf1, base); /* start download sequence */
1473                 outw(0x00, base);
1474                 outw(frame->addr, base); /* lsb of address */
1475
1476                 word_count = (frame->count >> 1) + frame->count % 2;
1477                 outw(word_count + 1, base);
1478                 InterruptTheCard(base);
1479
1480                 udelay(50); /* 0xf */
1481
1482                 if (WaitTillCardIsFree(base))
1483                         goto errrelfw;
1484
1485                 status = inw(base + 0x4);
1486                 if (status != 0) {
1487                         dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
1488                                  "Address:0x%x\n"
1489                                  "Count:0x%x\n"
1490                                  "Status: 0x%x\n",
1491                                  index + 1, frame->addr, frame->count, status);
1492                         goto errrelfw;
1493                 }
1494
1495                 data = kmalloc(word_count * 2, GFP_KERNEL);
1496                 if (data == NULL) {
1497                         dev_err(&pdev->dev, "Card%d, firmware upload "
1498                                 "failed, not enough memory\n", index + 1);
1499                         goto errrelfw;
1500                 }
1501                 inw(base);
1502                 insw(base, data, word_count);
1503                 InterruptTheCard(base);
1504
1505                 for (a = 0; a < frame->count; a++)
1506                         if (data[a] != frame->data[a]) {
1507                                 kfree(data);
1508                                 dev_err(&pdev->dev, "Card%d, firmware upload "
1509                                         "failed\n", index + 1);
1510                                 goto errrelfw;
1511                         }
1512                 kfree(data);
1513
1514                 udelay(50); /* 0xf */
1515
1516                 if (WaitTillCardIsFree(base))
1517                         goto errrelfw;
1518
1519                 status = inw(base + 0x4);
1520                 if (status != 0) {
1521                         dev_err(&pdev->dev, "Card%d verify got out of sync. "
1522                                 "Card Status:0x%x\n", index + 1, status);
1523                         goto errrelfw;
1524                 }
1525         }
1526
1527         /* xfer ctrl */
1528         if (WaitTillCardIsFree(base))
1529                 goto errrelfw;
1530
1531         outw(0xf2, base);
1532         outw(0x800, base);
1533         outw(0x0, base);
1534         outw(0x0, base);
1535         InterruptTheCard(base);
1536         outw(0x0, base + 0x4); /* for ISI4608 cards */
1537
1538         board->status |= FIRMWARE_LOADED;
1539         retval = 0;
1540
1541 errrelfw:
1542         release_firmware(fw);
1543 end:
1544         return retval;
1545 }
1546
1547 /*
1548  *      Insmod can set static symbols so keep these static
1549  */
1550 static unsigned int card_count;
1551
1552 static int __devinit isicom_probe(struct pci_dev *pdev,
1553         const struct pci_device_id *ent)
1554 {
1555         unsigned int uninitialized_var(signature), index;
1556         int retval = -EPERM;
1557         struct isi_board *board = NULL;
1558
1559         if (card_count >= BOARD_COUNT)
1560                 goto err;
1561
1562         retval = pci_enable_device(pdev);
1563         if (retval) {
1564                 dev_err(&pdev->dev, "failed to enable\n");
1565                 goto err;
1566         }
1567
1568         dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
1569
1570         /* allot the first empty slot in the array */
1571         for (index = 0; index < BOARD_COUNT; index++) {
1572                 if (isi_card[index].base == 0) {
1573                         board = &isi_card[index];
1574                         break;
1575                 }
1576         }
1577         if (index == BOARD_COUNT) {
1578                 retval = -ENODEV;
1579                 goto err_disable;
1580         }
1581
1582         board->index = index;
1583         board->base = pci_resource_start(pdev, 3);
1584         board->irq = pdev->irq;
1585         card_count++;
1586
1587         pci_set_drvdata(pdev, board);
1588
1589         retval = pci_request_region(pdev, 3, ISICOM_NAME);
1590         if (retval) {
1591                 dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
1592                         "will be disabled.\n", board->base, board->base + 15,
1593                         index + 1);
1594                 retval = -EBUSY;
1595                 goto errdec;
1596         }
1597
1598         retval = request_irq(board->irq, isicom_interrupt,
1599                         IRQF_SHARED, ISICOM_NAME, board);
1600         if (retval < 0) {
1601                 dev_err(&pdev->dev, "Could not install handler at Irq %d. "
1602                         "Card%d will be disabled.\n", board->irq, index + 1);
1603                 goto errunrr;
1604         }
1605
1606         retval = reset_card(pdev, index, &signature);
1607         if (retval < 0)
1608                 goto errunri;
1609
1610         retval = load_firmware(pdev, index, signature);
1611         if (retval < 0)
1612                 goto errunri;
1613
1614         for (index = 0; index < board->port_count; index++)
1615                 tty_register_device(isicom_normal, board->index * 16 + index,
1616                                 &pdev->dev);
1617
1618         return 0;
1619
1620 errunri:
1621         free_irq(board->irq, board);
1622 errunrr:
1623         pci_release_region(pdev, 3);
1624 errdec:
1625         board->base = 0;
1626         card_count--;
1627 err_disable:
1628         pci_disable_device(pdev);
1629 err:
1630         return retval;
1631 }
1632
1633 static void __devexit isicom_remove(struct pci_dev *pdev)
1634 {
1635         struct isi_board *board = pci_get_drvdata(pdev);
1636         unsigned int i;
1637
1638         for (i = 0; i < board->port_count; i++)
1639                 tty_unregister_device(isicom_normal, board->index * 16 + i);
1640
1641         free_irq(board->irq, board);
1642         pci_release_region(pdev, 3);
1643         board->base = 0;
1644         card_count--;
1645         pci_disable_device(pdev);
1646 }
1647
1648 static int __init isicom_init(void)
1649 {
1650         int retval, idx, channel;
1651         struct isi_port *port;
1652
1653         for (idx = 0; idx < BOARD_COUNT; idx++) {
1654                 port = &isi_ports[idx * 16];
1655                 isi_card[idx].ports = port;
1656                 spin_lock_init(&isi_card[idx].card_lock);
1657                 for (channel = 0; channel < 16; channel++, port++) {
1658                         tty_port_init(&port->port);
1659                         port->port.ops = &isicom_port_ops;
1660                         port->magic = ISICOM_MAGIC;
1661                         port->card = &isi_card[idx];
1662                         port->channel = channel;
1663                         port->port.close_delay = 50 * HZ/100;
1664                         port->port.closing_wait = 3000 * HZ/100;
1665                         port->status = 0;
1666                         /*  . . .  */
1667                 }
1668                 isi_card[idx].base = 0;
1669                 isi_card[idx].irq = 0;
1670         }
1671
1672         /* tty driver structure initialization */
1673         isicom_normal = alloc_tty_driver(PORT_COUNT);
1674         if (!isicom_normal) {
1675                 retval = -ENOMEM;
1676                 goto error;
1677         }
1678
1679         isicom_normal->name                     = "ttyM";
1680         isicom_normal->major                    = ISICOM_NMAJOR;
1681         isicom_normal->minor_start              = 0;
1682         isicom_normal->type                     = TTY_DRIVER_TYPE_SERIAL;
1683         isicom_normal->subtype                  = SERIAL_TYPE_NORMAL;
1684         isicom_normal->init_termios             = tty_std_termios;
1685         isicom_normal->init_termios.c_cflag     = B9600 | CS8 | CREAD | HUPCL |
1686                 CLOCAL;
1687         isicom_normal->flags                    = TTY_DRIVER_REAL_RAW |
1688                 TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK;
1689         tty_set_operations(isicom_normal, &isicom_ops);
1690
1691         retval = tty_register_driver(isicom_normal);
1692         if (retval) {
1693                 pr_debug("Couldn't register the dialin driver\n");
1694                 goto err_puttty;
1695         }
1696
1697         retval = pci_register_driver(&isicom_driver);
1698         if (retval < 0) {
1699                 pr_err("Unable to register pci driver.\n");
1700                 goto err_unrtty;
1701         }
1702
1703         mod_timer(&tx, jiffies + 1);
1704
1705         return 0;
1706 err_unrtty:
1707         tty_unregister_driver(isicom_normal);
1708 err_puttty:
1709         put_tty_driver(isicom_normal);
1710 error:
1711         return retval;
1712 }
1713
1714 static void __exit isicom_exit(void)
1715 {
1716         del_timer_sync(&tx);
1717
1718         pci_unregister_driver(&isicom_driver);
1719         tty_unregister_driver(isicom_normal);
1720         put_tty_driver(isicom_normal);
1721 }
1722
1723 module_init(isicom_init);
1724 module_exit(isicom_exit);
1725
1726 MODULE_AUTHOR("MultiTech");
1727 MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
1728 MODULE_LICENSE("GPL");
1729 MODULE_FIRMWARE("isi608.bin");
1730 MODULE_FIRMWARE("isi608em.bin");
1731 MODULE_FIRMWARE("isi616em.bin");
1732 MODULE_FIRMWARE("isi4608.bin");
1733 MODULE_FIRMWARE("isi4616.bin");