drivers/staging/wlags49_h2/wl_profile.c

   1 /*******************************************************************************
   2  * Agere Systems Inc.
   3  * Wireless device driver for Linux (wlags49).
   4  *
   5  * Copyright (c) 1998-2003 Agere Systems Inc.
   6  * All rights reserved.
   7  *   http://www.agere.com
   8  *
   9  * Initially developed by TriplePoint, Inc.
  10  *   http://www.triplepoint.com
  11  *
  12  *------------------------------------------------------------------------------
  13  *
  14  *   This file defines routines required to parse configuration parameters
  15  *   listed in a config file, if that config file exists.
  16  *
  17  *------------------------------------------------------------------------------
  18  *
  19  * SOFTWARE LICENSE
  20  *
  21  * This software is provided subject to the following terms and conditions,
  22  * which you should read carefully before using the software.  Using this
  23  * software indicates your acceptance of these terms and conditions.  If you do
  24  * not agree with these terms and conditions, do not use the software.
  25  *
  26  * Copyright © 2003 Agere Systems Inc.
  27  * All rights reserved.
  28  *
  29  * Redistribution and use in source or binary forms, with or without
  30  * modifications, are permitted provided that the following conditions are met:
  31  *
  32  * . Redistributions of source code must retain the above copyright notice, this
  33  *    list of conditions and the following Disclaimer as comments in the code as
  34  *    well as in the documentation and/or other materials provided with the
  35  *    distribution.
  36  *
  37  * . Redistributions in binary form must reproduce the above copyright notice,
  38  *    this list of conditions and the following Disclaimer in the documentation
  39  *    and/or other materials provided with the distribution.
  40  *
  41  * . Neither the name of Agere Systems Inc. nor the names of the contributors
  42  *    may be used to endorse or promote products derived from this software
  43  *    without specific prior written permission.
  44  *
  45  * Disclaimer
  46  *
  47  * THIS SOFTWARE IS PROVIDED \93AS IS\94 AND ANY EXPRESS OR IMPLIED WARRANTIES,
  48  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
  49  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
  50  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
  51  * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
  52  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  53  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  54  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  55  * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
  56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  57  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  58  * DAMAGE.
  59  *
  60  ******************************************************************************/
  61
  62 /* Only include this file if USE_PROFILE is defined */
  63 #ifdef USE_PROFILE
  64
  65
  66
  67
  68 /*******************************************************************************
  69  *  constant definitions
  70  ******************************************************************************/
  71
  72
  73 /* Allow support for calling system fcns to parse config file */
  74 #define __KERNEL_SYSCALLS__
  75
  76
  77
  78
  79 /*******************************************************************************
  80  * include files
  81  ******************************************************************************/
  82 #include <wl_version.h>
  83
  84 #include <linux/netdevice.h>
  85 #include <linux/etherdevice.h>
  86 #include <linux/unistd.h>
  87 #include <asm/uaccess.h>
  88 #include <limits.h>
  89
  90 #define BIN_DL 1
  91
  92 #include <debug.h>
  93 #include <hcf.h>
  94 /* #include <hcfdef.h> */
  95
  96 #include <wl_if.h>
  97 #include <wl_internal.h>
  98 #include <wl_util.h>
  99 #include <wl_enc.h>
 100 #include <wl_main.h>
 101 #include <wl_profile.h>
 102
 103
 104 /*******************************************************************************
 105  * global variables
 106  ******************************************************************************/
 107
 108 /* Definition needed to prevent unresolved external in unistd.h */
 109 static int errno;
 110
 111 #if DBG
 112 extern p_u32    DebugFlag;
 113 extern dbg_info_t *DbgInfo;
 114 #endif
 115
 116 int parse_yes_no(char *value);
 117
 118
 119 int parse_yes_no(char *value)
 120 {
 121 int rc = 0;                                                                             /* default to NO for invalid parameters */
 122
 123         if (strlen(value) == 1) {
 124                 if ((value[0] | ('Y'^'y')) == 'y')
 125                         rc = 1;
 126         /* } else { */
 127                 /* this should not be debug time info, it is an enduser data entry error ;? */
 128                 /* DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_MICROWAVE_ROBUSTNESS); */
 129         }
 130         return rc;
 131 } /* parse_yes_no */
 132
 133
 134 /*******************************************************************************
 135  *      parse_config()
 136  *******************************************************************************
 137  *
 138  *  DESCRIPTION:
 139  *
 140  *      This function opens the device's config file and parses the options from
 141  *   it, so that it can properly configure itself. If no configuration file
 142  *   or configuration is present, then continue to use the options already
 143  *   parsed from config.opts or wireless.opts.
 144  *
 145  *  PARAMETERS:
 146  *
 147  *      dev - a pointer to the device's net_device structure
 148  *
 149  *  RETURNS:
 150  *
 151  *      N/A
 152  *
 153  ******************************************************************************/
 154 void parse_config(struct net_device *dev)
 155 {
 156         int                                 file_desc;
 157 #if 0 /* BIN_DL */
 158         int                             rc;
 159         char                            *cp = NULL;
 160 #endif /* BIN_DL */
 161         char                buffer[MAX_LINE_SIZE];
 162         char                filename[MAX_LINE_SIZE];
 163         mm_segment_t        fs;
 164         struct wl_private   *wvlan_config = NULL;
 165         ENCSTRCT            sEncryption;
 166         /*------------------------------------------------------------------------*/
 167
 168         DBG_FUNC("parse_config");
 169         DBG_ENTER(DbgInfo);
 170
 171         /* Get the wavelan specific info for this device */
 172         wvlan_config = (struct wl_private *)dev->priv;
 173         if (wvlan_config == NULL) {
 174                 DBG_ERROR(DbgInfo, "Wavelan specific info struct not present?\n");
 175                 return;
 176         }
 177
 178         /* setup the default encryption string */
 179         strcpy(wvlan_config->szEncryption, DEF_CRYPT_STR);
 180
 181         /* Obtain a user-space process context, storing the original context */
 182         fs = get_fs();
 183         set_fs(get_ds());
 184
 185         /* Determine the filename for this device and attempt to open it */
 186         sprintf(filename, "%s%s", ROOT_CONFIG_FILENAME, dev->name);
 187         file_desc = open(filename, O_RDONLY, 0);
 188         if (file_desc != -1) {
 189                 DBG_TRACE(DbgInfo, "Wireless config file found. Parsing options...\n");
 190
 191                 /* Read out the options */
 192                 while (readline(file_desc, buffer))
 193                         translate_option(buffer, wvlan_config);
 194                 /* Close the file */
 195                 close(file_desc);       /* ;?even if file_desc == -1 ??? */
 196         } else {
 197                 DBG_TRACE(DbgInfo, "No iwconfig file found for this device; "
 198                                    "config.opts or wireless.opts will be used\n");
 199         }
 200         /* Return to the original context */
 201         set_fs(fs);
 202
 203         /* convert the WEP keys, if read in as key1, key2, type of data */
 204         if (wvlan_config->EnableEncryption) {
 205                 memset(&sEncryption, 0, sizeof(sEncryption));
 206
 207                 wl_wep_decode(CRYPT_CODE, &sEncryption,
 208                                                    wvlan_config->szEncryption);
 209
 210                 /* the Linux driver likes to use 1-4 for the key IDs, and then
 211                    convert to 0-3 when sending to the card.  The Windows code
 212                    base used 0-3 in the API DLL, which was ported to Linux.  For
 213                    the sake of the user experience, we decided to keep 0-3 as the
 214                    numbers used in the DLL; and will perform the +1 conversion here.
 215                    We could have converted  the entire Linux driver, but this is
 216                    less obtrusive.  This may be a "todo" to convert the whole driver */
 217                 sEncryption.wEnabled = wvlan_config->EnableEncryption;
 218                 sEncryption.wTxKeyID = wvlan_config->TransmitKeyID - 1;
 219
 220                 memcpy(&sEncryption.EncStr, &wvlan_config->DefaultKeys,
 221                                 sizeof(CFG_DEFAULT_KEYS_STRCT));
 222
 223                 memset(wvlan_config->szEncryption, 0, sizeof(wvlan_config->szEncryption));
 224
 225                 wl_wep_code(CRYPT_CODE, wvlan_config->szEncryption, &sEncryption,
 226                                                  sizeof(sEncryption));
 227         }
 228
 229         /* decode the encryption string for the call to wl_commit() */
 230         wl_wep_decode(CRYPT_CODE, &sEncryption, wvlan_config->szEncryption);
 231
 232         wvlan_config->TransmitKeyID    = sEncryption.wTxKeyID + 1;
 233         wvlan_config->EnableEncryption = sEncryption.wEnabled;
 234
 235         memcpy(&wvlan_config->DefaultKeys, &sEncryption.EncStr,
 236                         sizeof(CFG_DEFAULT_KEYS_STRCT));
 237
 238 #if 0 /* BIN_DL */
 239                 /* Obtain a user-space process context, storing the original context */
 240                 fs = get_fs();
 241                 set_fs(get_ds());
 242
 243                 /* ;?just to fake something */
 244                 strcpy(/*wvlan_config->fw_image_*/filename, "/etc/agere/fw.bin");
 245                 file_desc = open(/*wvlan_config->fw_image_*/filename, 0, 0);
 246                 if (file_desc == -1) {
 247                         DBG_ERROR(DbgInfo, "No image file found\n");
 248                 } else {
 249                         DBG_TRACE(DbgInfo, "F/W image file found\n");
 250 #define DHF_ALLOC_SIZE 96000                    /* just below 96K, let's hope it suffices for now and for the future */
 251                         cp = (char *)vmalloc(DHF_ALLOC_SIZE);
 252                         if (cp == NULL) {
 253                                 DBG_ERROR(DbgInfo, "error in vmalloc\n");
 254                         } else {
 255                                 rc = read(file_desc, cp, DHF_ALLOC_SIZE);
 256                                 if (rc == DHF_ALLOC_SIZE) {
 257                                         DBG_ERROR(DbgInfo, "buffer too small, %d\n", DHF_ALLOC_SIZE);
 258                                 } else if (rc > 0) {
 259                                         DBG_TRACE(DbgInfo, "read O.K.: %d bytes  %.12s\n", rc, cp);
 260                                         rc = read(file_desc, &cp[rc], 1);
 261                                         if (rc == 0)
 262                                                 DBG_TRACE(DbgInfo, "no more to read\n");
 263                                 }
 264                                 if (rc != 0) {
 265                                         DBG_ERROR(DbgInfo, "file not read in one swoop or other error"\
 266                                                                                 ", give up, too complicated, rc = %0X\n", rc);
 267                                 }
 268                                 vfree(cp);
 269                         }
 270                         close(file_desc);
 271                 }
 272                 set_fs(fs);                     /* Return to the original context */
 273 #endif /* BIN_DL */
 274
 275         DBG_LEAVE(DbgInfo);
 276         return;
 277 } /* parse_config */
 278
 279 /*******************************************************************************
 280  *      readline()
 281  *******************************************************************************
 282  *
 283  *  DESCRIPTION:
 284  *
 285  *      This function reads in data from a given file one line at a time,
 286  *   converting the detected newline character '\n' to a null '\0'. Note that
 287  *   the file descriptor must be valid before calling this function.
 288  *
 289  *  PARAMETERS:
 290  *
 291  *      filedesc    - the file descriptor for the open configuration file
 292  *      buffer      - a buffer pointer, passed in by the caller, to which the
 293  *                    line will be stored.
 294  *
 295  *  RETURNS:
 296  *
 297  *      the number of bytes read
 298  *      -1 on error
 299  *
 300  ******************************************************************************/
 301 int readline(int filedesc, char *buffer)
 302 {
 303         int result = -1;
 304         int bytes_read = 0;
 305         /*------------------------------------------------------------------------*/
 306
 307         /* Make sure the file descriptor is good */
 308         if (filedesc != -1) {
 309                 /* Read in from the file byte by byte until a newline is reached */
 310                 while ((result = read(filedesc, &buffer[bytes_read], 1)) == 1) {
 311                         if (buffer[bytes_read] == '\n') {
 312                                 buffer[bytes_read] = '\0';
 313                                 bytes_read++;
 314                                 break;
 315                         }
 316                         bytes_read++;
 317                 }
 318         }
 319
 320         /* Return the number of bytes read */
 321         if (result == -1)
 322                 return result;
 323         else
 324                 return bytes_read;
 325 } /* readline */
 326 /*============================================================================*/
 327
 328 /*******************************************************************************
 329  *      translate_option()
 330  *******************************************************************************
 331  *
 332  *  DESCRIPTION:
 333  *
 334  *      This function takes a line read in from the config file and parses out
 335  *   the key/value pairs. It then determines which key has been parsed and sets
 336  *   the card's configuration based on the value given.
 337  *
 338  *  PARAMETERS:
 339  *
 340  *      buffer - a buffer containing a line to translate
 341  *      config - a pointer to the device's private adapter structure
 342  *
 343  *  RETURNS:
 344  *
 345  *      N/A
 346  *
 347  ******************************************************************************/
 348 void translate_option(char *buffer, struct wl_private *lp)
 349 {
 350         unsigned int value_convert = 0;
 351         int string_length = 0;
 352         char *key = NULL;
 353         char *value = NULL;
 354         u_char mac_value[ETH_ALEN];
 355         /*------------------------------------------------------------------------*/
 356
 357         DBG_FUNC("translate_option");
 358
 359         if (buffer == NULL || lp == NULL) {
 360                 DBG_ERROR(DbgInfo, "Config file buffer and/or wavelan buffer ptr NULL\n");
 361                 return;
 362         }
 363
 364         ParseConfigLine(buffer, &key, &value);
 365
 366         if (key == NULL || value == NULL)
 367                 return;
 368
 369         /* Determine which key it is and perform the appropriate action */
 370
 371         /* Configuration parameters used in all scenarios */
 372 #if DBG
 373         /* handle DebugFlag as early as possible so it starts its influence as early
 374          * as possible
 375          */
 376         if (strcmp(key, PARM_NAME_DEBUG_FLAG) == 0) {
 377                 if (DebugFlag == ~0) {                  /* if DebugFlag is not specified on the command line */
 378                         if (DbgInfo->DebugFlag == 0) {  /* if pc_debug did not set DebugFlag (i.e.pc_debug is
 379                                                                                          * not specified or specified outside the 4-8 range
 380                                                                                          */
 381                                 DbgInfo->DebugFlag |= DBG_DEFAULTS;
 382                         }
 383                 } else {
 384                         DbgInfo->DebugFlag = simple_strtoul(value, NULL, 0); /* ;?DebugFlag; */
 385                 }
 386                 DbgInfo->DebugFlag = simple_strtoul(value, NULL, 0); /* ;?Delete ASAP */
 387         }
 388 #endif /* DBG */
 389         if (strcmp(key, PARM_NAME_AUTH_KEY_MGMT_SUITE) == 0) {
 390                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_AUTH_KEY_MGMT_SUITE, value);
 391
 392                 value_convert = simple_strtoul(value, NULL, 0);
 393                 if ((value_convert >= PARM_MIN_AUTH_KEY_MGMT_SUITE) || (value_convert <= PARM_MAX_AUTH_KEY_MGMT_SUITE))
 394                         lp->AuthKeyMgmtSuite = value_convert;
 395                 else
 396                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_AUTH_KEY_MGMT_SUITE);
 397         } else if (strcmp(key, PARM_NAME_BRSC_2GHZ) == 0) {
 398                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_2GHZ, value);
 399
 400                 value_convert = simple_strtoul(value, NULL, 0);
 401                 if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC))
 402                         lp->brsc[0] = value_convert;
 403                 else
 404                         DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_2GHZ);
 405         } else if (strcmp(key, PARM_NAME_BRSC_5GHZ) == 0) {
 406                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_5GHZ, value);
 407
 408                 value_convert = simple_strtoul(value, NULL, 0);
 409                 if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC))
 410                         lp->brsc[1] = value_convert;
 411                 else
 412                         DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_5GHZ);
 413         } else if ((strcmp(key, PARM_NAME_DESIRED_SSID) == 0) || (strcmp(key, PARM_NAME_OWN_SSID) == 0)) {
 414                 DBG_TRACE(DbgInfo, "SSID, value: %s\n", value);
 415
 416                 memset(lp->NetworkName, 0, (PARM_MAX_NAME_LEN + 1));
 417
 418                 /* Make sure the value isn't too long */
 419                 string_length = strlen(value);
 420                 if (string_length > PARM_MAX_NAME_LEN) {
 421                         DBG_WARNING(DbgInfo, "SSID too long; will be truncated\n");
 422                         string_length = PARM_MAX_NAME_LEN;
 423                 }
 424
 425                 memcpy(lp->NetworkName, value, string_length);
 426         }
 427 #if 0
 428         else if (strcmp(key, PARM_NAME_DOWNLOAD_FIRMWARE) == 0) {
 429                 DBG_TRACE(DbgInfo, "DOWNLOAD_FIRMWARE, value: %s\n", value);
 430                 memset(lp->fw_image_filename, 0, (MAX_LINE_SIZE + 1));
 431                 /* Make sure the value isn't too long */
 432                 string_length = strlen(value);
 433                 if (string_length > MAX_LINE_SIZE)
 434                         DBG_WARNING(DbgInfo, "F/W image file name too long; will be ignored\n");
 435                 else
 436                         memcpy(lp->fw_image_filename, value, string_length);
 437         }
 438 #endif
 439         else if (strcmp(key, PARM_NAME_ENABLE_ENCRYPTION) == 0) {
 440                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_ENABLE_ENCRYPTION, value);
 441
 442                 value_convert = simple_strtoul(value, NULL, 0);
 443                 if ((value_convert >= PARM_MIN_ENABLE_ENCRYPTION) && (value_convert <= PARM_MAX_ENABLE_ENCRYPTION))
 444                         lp->EnableEncryption = value_convert;
 445                 else
 446                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_ENABLE_ENCRYPTION);
 447         } else if (strcmp(key, PARM_NAME_ENCRYPTION) == 0) {
 448                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_ENCRYPTION, value);
 449
 450                 memset(lp->szEncryption, 0, sizeof(lp->szEncryption));
 451
 452                 /* Make sure the value isn't too long */
 453                 string_length = strlen(value);
 454                 if (string_length > sizeof(lp->szEncryption)) {
 455                         DBG_WARNING(DbgInfo, "%s too long; will be truncated\n", PARM_NAME_ENCRYPTION);
 456                         string_length = sizeof(lp->szEncryption);
 457                 }
 458
 459                 memcpy(lp->szEncryption, value, string_length);
 460         } else if (strcmp(key, PARM_NAME_KEY1) == 0) {
 461                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY1, value);
 462
 463                 if (is_valid_key_string(value)) {
 464                         memset(lp->DefaultKeys.key[0].key, 0, MAX_KEY_SIZE);
 465
 466                         key_string2key(value, &lp->DefaultKeys.key[0]);
 467                 } else {
 468                          DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY1);
 469                 }
 470         } else if (strcmp(key, PARM_NAME_KEY2) == 0) {
 471                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY2, value);
 472
 473                 if (is_valid_key_string(value)) {
 474                         memset(lp->DefaultKeys.key[1].key, 0, MAX_KEY_SIZE);
 475
 476                         key_string2key(value, &lp->DefaultKeys.key[1]);
 477                 } else {
 478                          DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY2);
 479                 }
 480         } else if (strcmp(key, PARM_NAME_KEY3) == 0) {
 481                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY3, value);
 482
 483                 if (is_valid_key_string(value)) {
 484                         memset(lp->DefaultKeys.key[2].key, 0, MAX_KEY_SIZE);
 485
 486                         key_string2key(value, &lp->DefaultKeys.key[2]);
 487                 } else {
 488                          DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY3);
 489                 }
 490         } else if (strcmp(key, PARM_NAME_KEY4) == 0) {
 491                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY4, value);
 492
 493                 if (is_valid_key_string(value)) {
 494                         memset(lp->DefaultKeys.key[3].key, 0, MAX_KEY_SIZE);
 495
 496                         key_string2key(value, &lp->DefaultKeys.key[3]);
 497                 } else {
 498                          DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY4);
 499                 }
 500         }
 501         /* New Parameters for WARP */
 502         else if (strcmp(key, PARM_NAME_LOAD_BALANCING) == 0) {
 503                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_LOAD_BALANCING, value);
 504                 lp->loadBalancing = parse_yes_no(value);
 505         } else if (strcmp(key, PARM_NAME_MEDIUM_DISTRIBUTION) == 0) {
 506                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MEDIUM_DISTRIBUTION, value);
 507                 lp->mediumDistribution = parse_yes_no(value);
 508         } else if (strcmp(key, PARM_NAME_MICROWAVE_ROBUSTNESS) == 0) {
 509                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MICROWAVE_ROBUSTNESS, value);
 510                 lp->MicrowaveRobustness = parse_yes_no(value);
 511         } else if (strcmp(key, PARM_NAME_MULTICAST_RATE) == 0) {
 512                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MULTICAST_RATE, value);
 513
 514                 value_convert = simple_strtoul(value, NULL, 0);
 515
 516                 if ((value_convert >= PARM_MIN_MULTICAST_RATE) && (value_convert <= PARM_MAX_MULTICAST_RATE))
 517                         lp->MulticastRate[0] = value_convert;
 518                 else
 519                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_MULTICAST_RATE);
 520         } else if (strcmp(key, PARM_NAME_OWN_CHANNEL) == 0) {
 521                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_CHANNEL, value);
 522
 523                 value_convert = simple_strtoul(value, NULL, 0);
 524                 if (wl_is_a_valid_chan(value_convert)) {
 525                         if (value_convert > 14)
 526                                 value_convert = value_convert | 0x100;
 527                         lp->Channel = value_convert;
 528                 } else {
 529                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_CHANNEL);
 530                 }
 531         } else if (strcmp(key, PARM_NAME_OWN_NAME) == 0) {
 532                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_NAME, value);
 533
 534                 memset(lp->StationName, 0, (PARM_MAX_NAME_LEN + 1));
 535
 536                 /* Make sure the value isn't too long */
 537                 string_length = strlen(value);
 538                 if (string_length > PARM_MAX_NAME_LEN) {
 539                         DBG_WARNING(DbgInfo, "%s too long; will be truncated\n", PARM_NAME_OWN_NAME);
 540                         string_length = PARM_MAX_NAME_LEN;
 541                 }
 542
 543                 memcpy(lp->StationName, value, string_length);
 544         } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD) == 0) {
 545                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD, value);
 546
 547                 value_convert = simple_strtoul(value, NULL, 0);
 548                 if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 549                         lp->RTSThreshold = value_convert;
 550                 else
 551                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD);
 552         } else if (strcmp(key, PARM_NAME_SRSC_2GHZ) == 0) {
 553                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_2GHZ, value);
 554
 555                 value_convert = simple_strtoul(value, NULL, 0);
 556                 if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC))
 557                         lp->srsc[0] = value_convert;
 558                 else
 559                         DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_2GHZ);
 560         } else if (strcmp(key, PARM_NAME_SRSC_5GHZ) == 0) {
 561                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_5GHZ, value);
 562
 563                 value_convert = simple_strtoul(value, NULL, 0);
 564                 if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC))
 565                         lp->srsc[1] = value_convert;
 566                 else
 567                         DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_5GHZ);
 568         } else if (strcmp(key, PARM_NAME_SYSTEM_SCALE) == 0) {
 569                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SYSTEM_SCALE, value);
 570
 571                 value_convert = simple_strtoul(value, NULL, 0);
 572                 if ((value_convert >= PARM_MIN_SYSTEM_SCALE) && (value_convert <= PARM_MAX_SYSTEM_SCALE))
 573                         lp->DistanceBetweenAPs = value_convert;
 574                 else
 575                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SYSTEM_SCALE);
 576         } else if (strcmp(key, PARM_NAME_TX_KEY) == 0) {
 577                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_KEY, value);
 578
 579                 value_convert = simple_strtoul(value, NULL, 0);
 580                 if ((value_convert >= PARM_MIN_TX_KEY) && (value_convert <= PARM_MAX_TX_KEY))
 581                         lp->TransmitKeyID = simple_strtoul(value, NULL, 0);
 582                 else
 583                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_KEY);
 584         } else if (strcmp(key, PARM_NAME_TX_RATE) == 0) {
 585                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE, value);
 586
 587                 value_convert = simple_strtoul(value, NULL, 0);
 588                 if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 589                         lp->TxRateControl[0] = value_convert;
 590                 else
 591                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE);
 592         } else if (strcmp(key, PARM_NAME_TX_POW_LEVEL) == 0) {
 593                 DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_POW_LEVEL, value);
 594
 595                 value_convert = simple_strtoul(value, NULL, 0);
 596                 if ((value_convert >= PARM_MIN_TX_POW_LEVEL) || (value_convert <= PARM_MAX_TX_POW_LEVEL))
 597                         lp->txPowLevel = value_convert;
 598                 else
 599                         DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_POW_LEVEL);
 600         }
 601
 602         /* Need to add? : Country code, Short/Long retry */
 603
 604         /* Configuration parameters specific to STA mode */
 605 #if 1 /* ;? (HCF_TYPE) & HCF_TYPE_STA */
 606 /* ;?seems reasonable that even an AP-only driver could afford this small additional footprint */
 607         if (CNV_INT_TO_LITTLE(lp->hcfCtx.IFB_FWIdentity.comp_id) == COMP_ID_FW_STA) {
 608                                         /* ;?should we return an error status in AP mode */
 609                 if (strcmp(key, PARM_NAME_PORT_TYPE) == 0) {
 610                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PORT_TYPE, value);
 611
 612                         value_convert = simple_strtoul(value, NULL, 0);
 613                         if ((value_convert == PARM_MIN_PORT_TYPE) || (value_convert == PARM_MAX_PORT_TYPE))
 614                                 lp->PortType = value_convert;
 615                         else
 616                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_PORT_TYPE);
 617                 } else if (strcmp(key, PARM_NAME_PM_ENABLED) == 0) {
 618                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PM_ENABLED, value);
 619                         value_convert = simple_strtoul(value, NULL, 0);
 620         /* ;? how about wl_main.c containing
 621          * VALID_PARAM(PARM_PM_ENABLED <= WVLAN_PM_STATE_STANDARD ||
 622          *                                       (PARM_PM_ENABLED & 0x7FFF) <= WVLAN_PM_STATE_STANDARD);
 623          */
 624                         if ((value_convert & 0x7FFF) <= PARM_MAX_PM_ENABLED) {
 625                                 lp->PMEnabled = value_convert;
 626                         } else {
 627                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_PM_ENABLED);
 628                                 /* ;?this is a data entry error, hence not a DBG_WARNING */
 629                         }
 630                 } else if (strcmp(key, PARM_NAME_CREATE_IBSS) == 0) {
 631                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_CREATE_IBSS, value);
 632                         lp->CreateIBSS = parse_yes_no(value);
 633                 } else if (strcmp(key, PARM_NAME_MULTICAST_RX) == 0) {
 634                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MULTICAST_RX, value);
 635                         lp->MulticastReceive = parse_yes_no(value);
 636                 } else if (strcmp(key, PARM_NAME_MAX_SLEEP) == 0) {
 637                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MAX_SLEEP, value);
 638
 639                         value_convert = simple_strtoul(value, NULL, 0);
 640                         if ((value_convert >= 0) && (value_convert <= 65535))
 641                                 lp->MaxSleepDuration = value_convert;
 642                         else
 643                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_MAX_SLEEP);
 644                 } else if (strcmp(key, PARM_NAME_NETWORK_ADDR) == 0) {
 645                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_NETWORK_ADDR, value);
 646
 647                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 648                                 memcpy(lp->MACAddress, mac_value, ETH_ALEN);
 649                         else
 650                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_NETWORK_ADDR);
 651                 } else if (strcmp(key, PARM_NAME_AUTHENTICATION) == 0) {
 652                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_AUTHENTICATION, value);
 653
 654                         value_convert = simple_strtoul(value, NULL, 0);
 655                         if ((value_convert >= PARM_MIN_AUTHENTICATION) && (value_convert <= PARM_MAX_AUTHENTICATION))
 656                                 lp->authentication = value_convert;
 657                         else
 658                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_AUTHENTICATION);
 659                 } else if (strcmp(key, PARM_NAME_OWN_ATIM_WINDOW) == 0) {
 660                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_ATIM_WINDOW, value);
 661
 662                         value_convert = simple_strtoul(value, NULL, 0);
 663                         if ((value_convert >= PARM_MIN_OWN_ATIM_WINDOW) && (value_convert <= PARM_MAX_OWN_ATIM_WINDOW))
 664                                 lp->atimWindow = value_convert;
 665                         else
 666                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_ATIM_WINDOW);
 667                 } else if (strcmp(key, PARM_NAME_PM_HOLDOVER_DURATION) == 0) {
 668                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PM_HOLDOVER_DURATION, value);
 669
 670                         value_convert = simple_strtoul(value, NULL, 0);
 671                         if ((value_convert >= PARM_MIN_PM_HOLDOVER_DURATION) && (value_convert <= PARM_MAX_PM_HOLDOVER_DURATION))
 672                                 lp->holdoverDuration = value_convert;
 673                         else
 674                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_PM_HOLDOVER_DURATION);
 675                 } else if (strcmp(key, PARM_NAME_PROMISCUOUS_MODE) == 0) {
 676                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PROMISCUOUS_MODE, value);
 677                         lp->promiscuousMode = parse_yes_no(value);
 678                 } else if (strcmp(key, PARM_NAME_CONNECTION_CONTROL) == 0) {
 679                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_CONNECTION_CONTROL, value);
 680
 681                         value_convert = simple_strtoul(value, NULL, 0);
 682                         if ((value_convert >= PARM_MIN_CONNECTION_CONTROL) && (value_convert <= PARM_MAX_CONNECTION_CONTROL))
 683                                 lp->connectionControl = value_convert;
 684                         else
 685                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_CONNECTION_CONTROL);
 686                 }
 687
 688                 /* Need to add? : Probe Data Rate */
 689         }
 690 #endif  /* (HCF_TYPE) & HCF_TYPE_STA */
 691
 692         /* Configuration parameters specific to AP mode */
 693 #if 1 /* ;? (HCF_TYPE) & HCF_TYPE_AP */
 694                 /* ;?should we restore this to allow smaller memory footprint */
 695         if (CNV_INT_TO_LITTLE(lp->hcfCtx.IFB_FWIdentity.comp_id) == COMP_ID_FW_AP) {
 696                 if (strcmp(key, PARM_NAME_OWN_DTIM_PERIOD) == 0) {
 697                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_DTIM_PERIOD, value);
 698
 699                         value_convert = simple_strtoul(value, NULL, 0);
 700                         if (value_convert >= PARM_MIN_OWN_DTIM_PERIOD)
 701                                 lp->DTIMPeriod = value_convert;
 702                         else
 703                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_DTIM_PERIOD);
 704                 } else if (strcmp(key, PARM_NAME_REJECT_ANY) == 0) {
 705                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_REJECT_ANY, value);
 706                         lp->RejectAny = parse_yes_no(value);
 707                 } else if (strcmp(key, PARM_NAME_EXCLUDE_UNENCRYPTED) == 0) {
 708                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_EXCLUDE_UNENCRYPTED, value);
 709                         lp->ExcludeUnencrypted = parse_yes_no(value);
 710                 } else if (strcmp(key, PARM_NAME_MULTICAST_PM_BUFFERING) == 0) {
 711                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MULTICAST_PM_BUFFERING, value);
 712                         lp->ExcludeUnencrypted = parse_yes_no(value);
 713                 } else if (strcmp(key, PARM_NAME_INTRA_BSS_RELAY) == 0) {
 714                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_INTRA_BSS_RELAY, value);
 715                         lp->ExcludeUnencrypted = parse_yes_no(value);
 716                 } else if (strcmp(key, PARM_NAME_OWN_BEACON_INTERVAL) == 0) {
 717                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_BEACON_INTERVAL, value);
 718
 719                         value_convert = simple_strtoul(value, NULL, 0);
 720                         if (value_convert >= PARM_MIN_OWN_BEACON_INTERVAL)
 721                                 lp->ownBeaconInterval = value_convert;
 722                         else
 723                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_BEACON_INTERVAL);
 724                 } else if (strcmp(key, PARM_NAME_COEXISTENCE) == 0) {
 725                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_COEXISTENCE, value);
 726
 727                         value_convert = simple_strtoul(value, NULL, 0);
 728                         if (value_convert >= PARM_MIN_COEXISTENCE)
 729                                 lp->coexistence = value_convert;
 730                         else
 731                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_COEXISTENCE);
 732                 }
 733
 734 #ifdef USE_WDS
 735                 else if (strcmp(key, PARM_NAME_RTS_THRESHOLD1) == 0) {
 736                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD1, value);
 737
 738                         value_convert = simple_strtoul(value, NULL, 0);
 739                         if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 740                                 lp->wds_port[0].rtsThreshold = value_convert;
 741                         else
 742                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD1);
 743                 } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD2) == 0) {
 744                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD2, value);
 745
 746                         value_convert = simple_strtoul(value, NULL, 0);
 747                         if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 748                                 lp->wds_port[1].rtsThreshold = value_convert;
 749                         else
 750                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD2);
 751                 } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD3) == 0) {
 752                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD3, value);
 753
 754                         value_convert = simple_strtoul(value, NULL, 0);
 755                         if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 756                                 lp->wds_port[2].rtsThreshold = value_convert;
 757                         else
 758                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD3);
 759                 } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD4) == 0) {
 760                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD4, value);
 761
 762                         value_convert = simple_strtoul(value, NULL, 0);
 763                         if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 764                                 lp->wds_port[3].rtsThreshold = value_convert;
 765                         else
 766                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD4);
 767                 } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD5) == 0) {
 768                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD5, value);
 769
 770                         value_convert = simple_strtoul(value, NULL, 0);
 771                         if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 772                                 lp->wds_port[4].rtsThreshold = value_convert;
 773                         else
 774                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD5);
 775                 } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD6) == 0) {
 776                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD6, value);
 777
 778                         value_convert = simple_strtoul(value, NULL, 0);
 779                         if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD))
 780                                 lp->wds_port[5].rtsThreshold = value_convert;
 781                         else
 782                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD6);
 783                 } else if (strcmp(key, PARM_NAME_TX_RATE1) == 0) {
 784                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE1, value);
 785
 786                         value_convert = simple_strtoul(value, NULL, 0);
 787                         if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 788                                 lp->wds_port[0].txRateCntl = value_convert;
 789                         else
 790                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE1);
 791                 } else if (strcmp(key, PARM_NAME_TX_RATE2) == 0) {
 792                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE2, value);
 793
 794                         value_convert = simple_strtoul(value, NULL, 0);
 795                         if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 796                                 lp->wds_port[1].txRateCntl = value_convert;
 797                         else
 798                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE2);
 799                 } else if (strcmp(key, PARM_NAME_TX_RATE3) == 0) {
 800                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE3, value);
 801
 802                         value_convert = simple_strtoul(value, NULL, 0);
 803                         if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 804                                 lp->wds_port[2].txRateCntl = value_convert;
 805                         else
 806                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE3);
 807                 } else if (strcmp(key, PARM_NAME_TX_RATE4) == 0) {
 808                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE4, value);
 809
 810                         value_convert = simple_strtoul(value, NULL, 0);
 811                         if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 812                                 lp->wds_port[3].txRateCntl = value_convert;
 813                         else
 814                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE4);
 815                 } else if (strcmp(key, PARM_NAME_TX_RATE5) == 0) {
 816                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE5, value);
 817
 818                         value_convert = simple_strtoul(value, NULL, 0);
 819                         if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 820                                 lp->wds_port[4].txRateCntl = value_convert;
 821                         else
 822                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE5);
 823                 } else if (strcmp(key, PARM_NAME_TX_RATE6) == 0) {
 824                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE6, value);
 825
 826                         value_convert = simple_strtoul(value, NULL, 0);
 827                         if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE))
 828                                 lp->wds_port[5].txRateCntl = value_convert;
 829                         else
 830                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE6);
 831                 } else if (strcmp(key, PARM_NAME_WDS_ADDRESS1) == 0) {
 832                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS1, value);
 833
 834                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 835                                 memcpy(lp->wds_port[0].wdsAddress, mac_value, ETH_ALEN);
 836                         else
 837                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS1);
 838                 } else if (strcmp(key, PARM_NAME_WDS_ADDRESS2) == 0) {
 839                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS2, value);
 840
 841                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 842                                 memcpy(lp->wds_port[1].wdsAddress, mac_value, ETH_ALEN);
 843                         else
 844                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS2);
 845                 } else if (strcmp(key, PARM_NAME_WDS_ADDRESS3) == 0) {
 846                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS3, value);
 847
 848                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 849                                 memcpy(lp->wds_port[2].wdsAddress, mac_value, ETH_ALEN);
 850                         else
 851                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS3);
 852                 } else if (strcmp(key, PARM_NAME_WDS_ADDRESS4) == 0) {
 853                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS4, value);
 854
 855                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 856                                 memcpy(lp->wds_port[3].wdsAddress, mac_value, ETH_ALEN);
 857                         else
 858                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS4);
 859                 } else if (strcmp(key, PARM_NAME_WDS_ADDRESS5) == 0) {
 860                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS5, value);
 861
 862                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 863                                 memcpy(lp->wds_port[4].wdsAddress, mac_value, ETH_ALEN);
 864                         else
 865                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS5);
 866                 } else if (strcmp(key, PARM_NAME_WDS_ADDRESS6) == 0) {
 867                         DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS6, value);
 868
 869                         if (parse_mac_address(value, mac_value) == ETH_ALEN)
 870                                 memcpy(lp->wds_port[5].wdsAddress, mac_value, ETH_ALEN);
 871                         else
 872                                 DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS6);
 873                 }
 874 #endif  /* USE_WDS */
 875         }
 876 #endif  /* (HCF_TYPE) & HCF_TYPE_AP */
 877
 878         return;
 879 } /* translate_option */
 880 /*============================================================================*/
 881
 882 /*******************************************************************************
 883  *      parse_mac_address()
 884  *******************************************************************************
 885  *
 886  *  DESCRIPTION:
 887  *
 888  *      This function will parse a mac address string and convert it to a byte
 889  *   array.
 890  *
 891  *  PARAMETERS:
 892  *
 893  *      value       - the MAC address, represented as a string
 894  *      byte_array  - the MAC address, represented as a byte array of length
 895  *                    ETH_ALEN
 896  *
 897  *  RETURNS:
 898  *
 899  *      The number of bytes in the final MAC address, should equal to ETH_ALEN.
 900  *
 901  ******************************************************************************/
 902 int parse_mac_address(char *value, u_char *byte_array)
 903 {
 904         int     value_offset = 0;
 905         int     array_offset = 0;
 906         int     field_offset = 0;
 907         char    byte_field[3];
 908         /*------------------------------------------------------------------------*/
 909
 910         memset(byte_field, '\0', 3);
 911
 912         while (value[value_offset] != '\0') {
 913                 /* Skip over the colon chars seperating the bytes, if they exist */
 914                 if (value[value_offset] == ':') {
 915                         value_offset++;
 916                         continue;
 917                 }
 918
 919                 byte_field[field_offset] = value[value_offset];
 920                 field_offset++;
 921                 value_offset++;
 922
 923                 /* Once the byte_field is filled, convert it and store it */
 924                 if (field_offset == 2) {
 925                         byte_field[field_offset] = '\0';
 926                         byte_array[array_offset] = simple_strtoul(byte_field, NULL, 16);
 927                         field_offset = 0;
 928                         array_offset++;
 929                 }
 930         }
 931
 932         /* Use the array_offset as a check; 6 bytes should be written to the
 933            byte_array */
 934         return array_offset;
 935 } /* parse_mac_address */
 936 /*============================================================================*/
 937
 938 /*******************************************************************************
 939  *      ParseConfigLine()
 940  *******************************************************************************
 941  *
 942  *  DESCRIPTION:
 943  *
 944  *      Parses a line from the configuration file into an L-val and an R-val,
 945  *  representing a key/value pair.
 946  *
 947  *  PARAMETERS:
 948  *
 949  *      pszLine     - the line from the config file to parse
 950  *      ppszLVal    - the resulting L-val (Key)
 951  *      ppszRVal    - the resulting R-val (Value)
 952  *
 953  *  RETURNS:
 954  *
 955  *      N/A
 956  *
 957  ******************************************************************************/
 958 void ParseConfigLine(char *pszLine, char **ppszLVal, char **ppszRVal)
 959 {
 960         int i;
 961         int size;
 962         /*------------------------------------------------------------------------*/
 963
 964         DBG_FUNC("ParseConfigLine");
 965         DBG_ENTER(DbgInfo);
 966
 967         /* get a snapshot of our string size */
 968         size      = strlen(pszLine);
 969         *ppszLVal = NULL;
 970         *ppszRVal = NULL;
 971
 972         if (pszLine[0] != '#' &&                                                        /* skip the line if it is a comment */
 973                  pszLine[0] != '\n' &&                                                  /* if it's an empty UNIX line, do nothing */
 974                  !(pszLine[0] == '\r' && pszLine[1] == '\n')    /* if it's an empty MS-DOS line, do nothing */
 975            ) {
 976                 /* advance past any whitespace, and assign the L-value */
 977                 for (i = 0; i < size; i++) {
 978                         if (pszLine[i] != ' ') {
 979                                 *ppszLVal = &pszLine[i];
 980                                 break;
 981                         }
 982                 }
 983                 /* advance to the end of the l-value*/
 984                 for (i++; i < size; i++) {
 985                         if (pszLine[i] == ' ' || pszLine[i] == '=') {
 986                                 pszLine[i] = '\0';
 987                                 break;
 988                         }
 989                 }
 990                 /* make any whitespace and the equal sign a NULL character, and
 991                    advance to the R-Value */
 992                 for (i++; i < size; i++) {
 993                         if (pszLine[i] == ' ' || pszLine[i] == '=') {
 994                                 pszLine[i] = '\0';
 995                                 continue;
 996                         }
 997                         *ppszRVal = &pszLine[i];
 998                         break;
 999                 }
1000                 /* make the line ending character(s) a NULL */
1001                 for (i++; i < size; i++) {
1002                         if (pszLine[i] == '\n')
1003                                 pszLine[i] = '\0';
1004                         if ((pszLine[i] == '\r') && (pszLine[i+1] == '\n'))
1005                                 pszLine[i] = '\0';
1006                 }
1007         }
1008         DBG_LEAVE(DbgInfo);
1009 } /* ParseConfigLine */
1010 /*============================================================================*/
1011
1012 #endif  /* USE_PROFILE */