1 /******************************************************************************
2 * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
4 * This program is distributed in the hope that it will be useful, but WITHOUT
5 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
6 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
9 * You should have received a copy of the GNU General Public License along with
10 * this program; if not, write to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
13 * The full GNU General Public License is included in this distribution in the
14 * file called LICENSE.
16 * Contact Information:
17 * wlanfae <wlanfae@realtek.com>
18 ******************************************************************************/
23 typedef enum _VERSION_8192S{
27 }VERSION_8192S,*PVERSION_8192S;
29 typedef enum _VERSION_8192SUsb{
30 VERSION_8192SU_A, //A-Cut
31 VERSION_8192SU_B, //B-Cut
32 VERSION_8192SU_C, //C-Cut
33 }VERSION_8192SUsb, *PVERSION_8192SUsb;
37 typedef enum _RT_RF_TYPE_DEFINITION
47 typedef enum _BaseBand_Config_Type{
48 BaseBand_Config_PHY_REG = 0, //Radio Path A
49 BaseBand_Config_AGC_TAB = 1, //Radio Path B
50 }BaseBand_Config_Type, *PBaseBand_Config_Type;
52 #define RTL8187_REQT_READ 0xc0
53 #define RTL8187_REQT_WRITE 0x40
54 #define RTL8187_REQ_GET_REGS 0x05
55 #define RTL8187_REQ_SET_REGS 0x05
60 #define R8180_MAX_RETRY 255
61 #define RX_URB_SIZE 0x4000
63 #define BB_ANTATTEN_CHAN14 0x0c
64 #define BB_ANTENNA_B 0x40
66 #define BB_HOST_BANG (1<<30)
67 #define BB_HOST_BANG_EN (1<<2)
68 #define BB_HOST_BANG_CLK (1<<1)
69 #define BB_HOST_BANG_RW (1<<3)
70 #define BB_HOST_BANG_DATA 1
73 //============================================================
75 //============================================================
76 #define BB_GLOBAL_RESET_BIT 0x1
83 #define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
84 (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
86 #define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
87 #define RX_FIFO_THRESHOLD_SHIFT 13
88 #define RX_FIFO_THRESHOLD_128 3
89 #define RX_FIFO_THRESHOLD_256 4
90 #define RX_FIFO_THRESHOLD_512 5
91 #define RX_FIFO_THRESHOLD_1024 6
92 #define RX_FIFO_THRESHOLD_NONE 7
94 #define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
96 //----------------------------------------------------------------------------
97 // 8190 CPU General Register (offset 0x100, 4 byte)
98 //----------------------------------------------------------------------------
99 #define CPU_CCK_LOOPBACK 0x00030000
100 #define CPU_GEN_SYSTEM_RESET 0x00000001
101 #define CPU_GEN_FIRMWARE_RESET 0x00000008
102 #define CPU_GEN_BOOT_RDY 0x00000010
103 #define CPU_GEN_FIRM_RDY 0x00000020
104 #define CPU_GEN_PUT_CODE_OK 0x00000080
105 #define CPU_GEN_BB_RST 0x00000100
106 #define CPU_GEN_PWR_STB_CPU 0x00000004
107 #define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
108 #define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
109 //----------------------------------------------------------------------------
111 //// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
112 ////----------------------------------------------------------------------------
113 #define MSR_LINK_MASK ((1<<0)|(1<<1))
114 #define MSR_LINK_MANAGED 2
115 #define MSR_LINK_NONE 0
116 #define MSR_LINK_SHIFT 0
117 #define MSR_LINK_ADHOC 1
118 #define MSR_LINK_MASTER 3
119 #define MSR_LINK_ENEDCA (1<<4)
122 #define EPROM_CMD_RESERVED_MASK (1<<5)
123 #define EPROM_CMD_OPERATING_MODE_SHIFT 6
124 #define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
125 #define EPROM_CMD_CONFIG 0x3
126 #define EPROM_CMD_NORMAL 0
127 #define EPROM_CMD_LOAD 1
128 #define EPROM_CMD_PROGRAM 2
129 #define EPROM_CS_SHIFT 3
130 #define EPROM_CK_SHIFT 2
131 #define EPROM_W_SHIFT 1
132 #define EPROM_R_SHIFT 0
134 //============================================================
135 // 8192S Regsiter offset definition
136 //============================================================
139 // MAC register 0x0 - 0x5xx
140 // 1. System configuration registers.
141 // 2. Command Control Registers
142 // 3. MACID Setting Registers
143 // 4. Timing Control Registers
144 // 5. FIFO Control Registers
145 // 6. Adaptive Control Registers
146 // 7. EDCA Setting Registers
147 // 8. WMAC, BA and CCX related Register.
148 // 9. Security Control Registers
149 // 10. Power Save Control Registers
150 // 11. General Purpose Registers
151 // 12. Host Interrupt Status Registers
152 // 13. Test Mode and Debug Control Registers
153 // 14. PCIE config register
158 // 1. System Configuration Registers (Offset: 0x0000 - 0x003F)
160 #define SYS_ISO_CTRL 0x0000 // System Isolation Interface Control.
161 #define SYS_FUNC_EN 0x0002 // System Function Enable.
162 #define PMC_FSM 0x0004 // Power Sequence Control.
163 #define SYS_CLKR 0x0008 // System Clock.
164 #define EPROM_CMD 0x000A // 93C46/93C56 Command Register. (win CR93C46)
165 #define EE_VPD 0x000C // EEPROM VPD Data.
166 #define AFE_MISC 0x0010 // AFE Misc.
167 #define SPS0_CTRL 0x0011 // Switching Power Supply 0 Control.
168 #define SPS1_CTRL 0x0018 // Switching Power Supply 1 Control.
169 #define RF_CTRL 0x001F // RF Block Control.
170 #define LDOA15_CTRL 0x0020 // V15 Digital LDO Control.
171 #define LDOV12D_CTRL 0x0021 // V12 Digital LDO Control.
172 #define LDOHCI12_CTRL 0x0022 // V12 Digital LDO Control.
173 #define LDO_USB_SDIO 0x0023 // LDO USB Control.
174 #define LPLDO_CTRL 0x0024 // Low Power LDO Control.
175 #define AFE_XTAL_CTRL 0x0026 // AFE Crystal Control.
176 #define AFE_PLL_CTRL 0x0028 // System Function Enable.
177 #define EFUSE_CTRL 0x0030 // E-Fuse Control.
178 #define EFUSE_TEST 0x0034 // E-Fuse Test.
179 #define PWR_DATA 0x0038 // Power on date.
180 #define DBG_PORT 0x003A // MAC debug port select
181 #define DPS_TIMER 0x003C // Deep Power Save Timer Register.
182 #define RCLK_MON 0x003E // Retention Clock Monitor.
185 // 2. Command Control Registers (Offset: 0x0040 - 0x004F)
187 #define CMDR 0x0040 // MAC Command Register.
188 #define TXPAUSE 0x0042 // Transmission Pause Register.
189 #define LBKMD_SEL 0x0043 // Loopback Mode Select Register.
190 #define TCR 0x0044 // Transmit Configuration Register
191 #define RCR 0x0048 // Receive Configuration Register
192 #define MSR 0x004C // Media Status register
193 #define SYSF_CFG 0x004D // System Function Configuration.
194 #define RX_PKY_LIMIT 0x004E // RX packet length limit
195 #define MBIDCTRL 0x004F // MBSSID Control.
198 // 3. MACID Setting Registers (Offset: 0x0050 - 0x007F)
200 #define MACIDR 0x0050 // MAC ID Register, Offset 0x0050-0x0055
201 #define MACIDR0 0x0050 // MAC ID Register, Offset 0x0050-0x0053
202 #define MACIDR4 0x0054 // MAC ID Register, Offset 0x0054-0x0055
203 #define BSSIDR 0x0058 // BSSID Register, Offset 0x0058-0x005D
204 #define HWVID 0x005E // HW Version ID.
205 #define MAR 0x0060 // Multicase Address.
206 #define MBIDCAMCONTENT 0x0068 // MBSSID CAM Content.
207 #define MBIDCAMCFG 0x0070 // MBSSID CAM Configuration.
208 #define BUILDTIME 0x0074 // Build Time Register.
209 #define BUILDUSER 0x0078 // Build User Register.
211 // Redifine MACID register, to compatible prior ICs.
216 // 4. Timing Control Registers (Offset: 0x0080 - 0x009F)
218 #define TSFR 0x0080 // Timing Sync Function Timer Register.
219 #define SLOT_TIME 0x0089 // Slot Time Register, in us.
220 #define USTIME 0x008A // EDCA/TSF clock unit time us unit.
221 #define SIFS_CCK 0x008C // SIFS for CCK, in us.
222 #define SIFS_OFDM 0x008E // SIFS for OFDM, in us.
223 #define PIFS_TIME 0x0090 // PIFS time register.
224 #define ACK_TIMEOUT 0x0091 // Ack Timeout Register
225 #define EIFSTR 0x0092 // EIFS time regiser.
226 #define BCN_INTERVAL 0x0094 // Beacon Interval, in TU.
227 #define ATIMWND 0x0096 // ATIM Window width, in TU.
228 #define BCN_DRV_EARLY_INT 0x0098 // Driver Early Interrupt.
229 #define BCN_DMATIME 0x009A // Beacon DMA and ATIM INT Time.
230 #define BCN_ERR_THRESH 0x009C // Beacon Error Threshold.
231 #define MLT 0x009D // MSDU Lifetime.
232 #define RSVD_MAC_TUNE_US 0x009E // MAC Internal USE.
235 // 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F)
238 #define RQPN1 0x00A0 // Reserved Queue Page Number for BK
239 #define RQPN2 0x00A1 // Reserved Queue Page Number for BE
240 #define RQPN3 0x00A2 // Reserved Queue Page Number for VI
241 #define RQPN4 0x00A3 // Reserved Queue Page Number for VO
242 #define RQPN5 0x00A4 // Reserved Queue Page Number for HCCA
243 #define RQPN6 0x00A5 // Reserved Queue Page Number for CMD
244 #define RQPN7 0x00A6 // Reserved Queue Page Number for MGNT
245 #define RQPN8 0x00A7 // Reserved Queue Page Number for HIGH
246 #define RQPN9 0x00A8 // Reserved Queue Page Number for Beacon
247 #define RQPN10 0x00A9 // Reserved Queue Page Number for Public
248 #define LD_RQPN 0x00AB //
249 #define RXFF_BNDY 0x00AC //
250 #define RXRPT_BNDY 0x00B0 //
251 #define TXPKTBUF_PGBNDY 0x00B4 //
252 #define PBP 0x00B5 //
253 #define RXDRVINFO_SZ 0x00B6 //
254 #define TXFF_STATUS 0x00B7 //
255 #define RXFF_STATUS 0x00B8 //
256 #define TXFF_EMPTY_TH 0x00B9 //
257 #define SDIO_RX_BLKSZ 0x00BC //
258 #define RXDMA 0x00BD //
259 #define RXPKT_NUM 0x00BE //
260 #define C2HCMD_UDT_SIZE 0x00C0 //
261 #define C2HCMD_UDT_ADDR 0x00C2 //
262 #define FIFOPAGE1 0x00C4 // Available public queue page number
263 #define FIFOPAGE2 0x00C8 //
264 #define FIFOPAGE3 0x00CC //
265 #define FIFOPAGE4 0x00D0 //
266 #define FIFOPAGE5 0x00D4 //
267 #define FW_RSVD_PG_CRTL 0x00D8 //
268 #define RXDMA_AGG_PG_TH 0x00D9 //
269 #define TXRPTFF_RDPTR 0x00E0 //
270 #define TXRPTFF_WTPTR 0x00E4 //
271 #define C2HFF_RDPTR 0x00E8 //FIFO Read pointer register.
272 #define C2HFF_WTPTR 0x00EC //FIFO Write pointer register.
273 #define RXFF0_RDPTR 0x00F0 //
274 #define RXFF0_WTPTR 0x00F4 //
275 #define RXFF1_RDPTR 0x00F8 //
276 #define RXFF1_WTPTR 0x00FC //
277 #define RXRPT0_RDPTR 0x0100 //
278 #define RXRPT0_WTPTR 0x0104 //
279 #define RXRPT1_RDPTR 0x0108 //
280 #define RXRPT1_WTPTR 0x010C //
281 #define RX0_UDT_SIZE 0x0110 //
282 #define RX1PKTNUM 0x0114 //
283 #define RXFILTERMAP 0x0116 //
284 #define RXFILTERMAP_GP1 0x0118 //
285 #define RXFILTERMAP_GP2 0x011A //
286 #define RXFILTERMAP_GP3 0x011C //
287 #define BCNQ_CTRL 0x0120 //
288 #define MGTQ_CTRL 0x0124 //
289 #define HIQ_CTRL 0x0128 //
290 #define VOTID7_CTRL 0x012c //
291 #define VOTID6_CTRL 0x0130 //
292 #define VITID5_CTRL 0x0134 //
293 #define VITID4_CTRL 0x0138 //
294 #define BETID3_CTRL 0x013c //
295 #define BETID0_CTRL 0x0140 //
296 #define BKTID2_CTRL 0x0144 //
297 #define BKTID1_CTRL 0x0148 //
298 #define CMDQ_CTRL 0x014c //
299 #define TXPKT_NUM_CTRL 0x0150 //
300 #define TXQ_PGADD 0x0152 //
301 #define TXFF_PG_NUM 0x0154 //
302 #define TRXDMA_STATUS 0x0156 //
305 // 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
307 #define INIMCS_SEL 0x0160 // Init MCSrate for 32 MACID 0x160-17f
308 #define TX_RATE_REG INIMCS_SEL //Current Tx rate register
309 #define INIRTSMCS_SEL 0x0180 // Init RTSMCSrate
310 #define RRSR 0x0181 // Response rate setting.
311 #define ARFR0 0x0184 // Auto Rate Fallback 0 Register.
312 #define ARFR1 0x0188 //
313 #define ARFR2 0x018C //
314 #define ARFR3 0x0190 //
315 #define ARFR4 0x0194 //
316 #define ARFR5 0x0198 //
317 #define ARFR6 0x019C //
318 #define ARFR7 0x01A0 //
319 #define AGGLEN_LMT_H 0x01A7 // Aggregation Length Limit for High-MCS
320 #define AGGLEN_LMT_L 0x01A8 // Aggregation Length Limit for Low-MCS.
321 #define DARFRC 0x01B0 // Data Auto Rate Fallback Retry Count.
322 #define RARFRC 0x01B8 // Response Auto Rate Fallback Count.
323 #define MCS_TXAGC 0x01C0
324 #define CCK_TXAGC 0x01C8
327 // 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF)
329 #define EDCAPARA_VO 0x01D0 // EDCA Parameter Register for VO queue.
330 #define EDCAPARA_VI 0x01D4 // EDCA Parameter Register for VI queue.
331 #define EDCAPARA_BE 0x01D8 // EDCA Parameter Register for BE queue.
332 #define EDCAPARA_BK 0x01DC // EDCA Parameter Register for BK queue.
333 #define BCNTCFG 0x01E0 // Beacon Time Configuration Register.
334 #define CWRR 0x01E2 // Contention Window Report Register.
335 #define ACMAVG 0x01E4 // ACM Average Register.
336 #define AcmHwCtrl 0x01E7
337 #define VO_ADMTM 0x01E8 // Admission Time Register.
338 #define VI_ADMTM 0x01EC
339 #define BE_ADMTM 0x01F0
340 #define RETRY_LIMIT 0x01F4 // Retry Limit Registers[15:8]-short, [7:0]-long
341 #define SG_RATE 0x01F6 // Max MCS Rate Available Register, which we Set the hightst SG rate.
344 // 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F)
346 #define NAV_CTRL 0x0200
347 #define BW_OPMODE 0x0203
348 #define BACAMCMD 0x0204
349 #define BACAMCONTENT 0x0208 // Block ACK CAM R/W Register.
351 // Roger had defined the 0x2xx register WMAC definition
352 #define LBDLY 0x0210 // Loopback Delay Register.
353 #define FWDLY 0x0211 // FW Delay Register.
354 #define HWPC_RX_CTRL 0x0218 // HW Packet Conversion RX Control Reg
355 #define MQIR 0x0220 // Mesh Qos Type Indication Register.
356 #define MAIR 0x0222 // Mesh ACK.
357 #define MSIR 0x0224 // Mesh HW Security Requirement Indication Reg
358 #define CLM_RESULT 0x0227 // CCA Busy Fraction(Channel Load)
359 #define NHM_RPI_CNT 0x0228 // Noise Histogram Measurement (NHM) RPI Report.
360 #define RXERR_RPT 0x0230 // Rx Error Report.
361 #define NAV_PROT_LEN 0x0234 // NAV Protection Length.
362 #define CFEND_TH 0x0236 // CF-End Threshold.
363 #define AMPDU_MIN_SPACE 0x0237 // AMPDU Min Space.
364 #define TXOP_STALL_CTRL 0x0238
367 // 9. Security Control Registers (Offset: 0x0240 - 0x025F)
369 #define RWCAM 0x0240 //IN 8190 Data Sheet is called CAMcmd
370 #define WCAMI 0x0244 // Software write CAM input content
371 #define RCAMO 0x0248 // Software read/write CAM config
372 #define CAMDBG 0x024C
373 #define SECR 0x0250 //Security Configuration Register
376 // 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF)
378 #define WOW_CTRL 0x0260 //Wake On WLAN Control.
379 #define PSSTATUS 0x0261 // Power Save Status.
380 #define PSSWITCH 0x0262 // Power Save Switch.
381 #define MIMOPS_WAIT_PERIOD 0x0263
382 #define LPNAV_CTRL 0x0264
383 #define WFM0 0x0270 // Wakeup Frame Mask.
384 #define WFM1 0x0280 //
385 #define WFM2 0x0290 //
386 #define WFM3 0x02A0 //
387 #define WFM4 0x02B0 //
388 #define WFM5 0x02C0 // FW Control register.
389 #define WFCRC 0x02D0 // Wakeup Frame CRC.
390 #define RPWM 0x02DC // Host Request Power Mode.
391 #define CPWM 0x02DD // Current Power Mode.
392 #define FW_RPT_REG 0x02c4
395 // 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)
397 #define PSTIME 0x02E0 // Power Save Timer Register
398 #define TIMER0 0x02E4 //
399 #define TIMER1 0x02E8 //
400 #define GPIO_CTRL 0x02EC // GPIO Control Register
401 #define GPIO_IN 0x02EC // GPIO pins input value
402 #define GPIO_OUT 0x02ED // GPIO pins output value
403 #define GPIO_IO_SEL 0x02EE // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
404 #define GPIO_MOD 0x02EF //
405 #define GPIO_INTCTRL 0x02F0 // GPIO Interrupt Control Register[7:0]
406 #define MAC_PINMUX_CFG 0x02F1 // MAC PINMUX Configuration Reg[7:0]
407 #define LEDCFG 0x02F2 // System PINMUX Configuration Reg[7:0]
408 #define PHY_REG 0x02F3 // RPT: PHY REG Access Report Reg[7:0]
409 #define PHY_REG_DATA 0x02F4 // PHY REG Read DATA Register [31:0]
410 #define EFUSE_CLK 0x02F8 // CTRL: E-FUSE Clock Control Reg[7:0]
411 //#define GPIO_INTCTRL 0x02F9 // GPIO Interrupt Control Register[7:0]
414 // 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
416 #define IMR 0x0300 // Interrupt Mask Register
417 #define ISR 0x0308 // Interrupt Status Register
420 // 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F)
422 #define DBG_PORT_SWITCH 0x003A
423 #define BIST 0x0310 // Bist reg definition
424 #define DBS 0x0314 // Debug Select ???
425 #define CPUINST 0x0318 // CPU Instruction Read Register
426 #define CPUCAUSE 0x031C // CPU Cause Register
427 #define LBUS_ERR_ADDR 0x0320 // Lexra Bus Error Address Register
428 #define LBUS_ERR_CMD 0x0324 // Lexra Bus Error Command Register
429 #define LBUS_ERR_DATA_L 0x0328 // Lexra Bus Error Data Low DW Register
430 #define LBUS_ERR_DATA_H 0x032C //
431 #define LX_EXCEPTION_ADDR 0x0330 // Lexra Bus Exception Address Register
432 #define WDG_CTRL 0x0334 // Watch Dog Control Register
433 #define INTMTU 0x0338 // Interrupt Mitigation Time Unit Reg
434 #define INTM 0x033A // Interrupt Mitigation Register
435 #define FDLOCKTURN0 0x033C // FW/DRV Lock Turn 0 Register
436 #define FDLOCKTURN1 0x033D // FW/DRV Lock Turn 1 Register
437 #define TRXPKTBUF_DBG_DATA 0x0340 // TRX Packet Buffer Debug Data Register
438 #define TRXPKTBUF_DBG_CTRL 0x0348 // TRX Packet Buffer Debug Control Reg
439 #define DPLL 0x034A // DPLL Monitor Register [15:0]
440 #define CBUS_ERR_ADDR 0x0350 // CPU Bus Error Address Register
441 #define CBUS_ERR_CMD 0x0354 // CPU Bus Error Command Register
442 #define CBUS_ERR_DATA_L 0x0358 // CPU Bus Error Data Low DW Register
443 #define CBUS_ERR_DATA_H 0x035C //
444 #define USB_SIE_INTF_ADDR 0x0360 // USB SIE Access Interface Address Reg
445 #define USB_SIE_INTF_WD 0x0361 // USB SIE Access Interface WData Reg
446 #define USB_SIE_INTF_RD 0x0362 // USB SIE Access Interface RData Reg
447 #define USB_SIE_INTF_CTRL 0x0363 // USB SIE Access Interface Control Reg
452 // 14. PCIE config register (Offset 0x500-)
454 #define TPPoll 0x0500 // Transmit Polling
455 #define PM_CTRL 0x0502 // PCIE power management control Register
456 #define PCIF 0x0503 // PCI Function Register 0x0009h~0x000bh
458 #define THPDA 0x0514 // Transmit High Priority Desc Addr
459 #define TMDA 0x0518 // Transmit Management Desc Addr
460 #define TCDA 0x051C // Transmit Command Desc Addr
461 #define HDA 0x0520 // HCCA Desc Addr
462 #define TVODA 0x0524 // Transmit VO Desc Addr
463 #define TVIDA 0x0528 // Transmit VI Desc Addr
464 #define TBEDA 0x052C // Transmit BE Desc Addr
465 #define TBKDA 0x0530 // Transmit BK Desc Addr
466 #define TBDA 0x0534 // Transmit Beacon Desc Addr
467 #define RCDA 0x0538 // Receive Command Desc Addr
468 #define RDSA 0x053C // Receive Desc Starting Addr
469 #define DBI_WDATA 0x0540 // DBI write data Register
470 #define DBI_RDATA 0x0544 // DBI read data Register
471 #define DBI_CTRL 0x0548 // PCIE DBI control Register
472 #define MDIO_DATA 0x0550 // PCIE MDIO data Register
473 #define MDIO_CTRL 0x0554 // PCIE MDIO control Register
474 #define PCI_RPWM 0x0561 // PCIE RPWM register
475 #define PCI_CPWM 0x0563 // Current Power Mode.
478 // Config register (Offset 0x800-)
480 #define PHY_CCA 0x803 // CCA related register
482 //============================================================================
483 // 8192S USB specific Regsiter Offset and Content definition,
484 // 2008.08.28, added by Roger.
485 //============================================================================
486 // Rx Aggregation time-out reg.
487 #define USB_RX_AGG_TIMEOUT 0xFE5B
489 // Firware reserved Tx page control.
490 #define FW_OFFLOAD_EN BIT7
492 // Min Spacing related settings.
493 #define MAX_MSS_DENSITY 0x13
494 #define MAX_MSS_DENSITY_2T 0x13
495 #define MAX_MSS_DENSITY_1T 0x0A
497 // Rx DMA Control related settings
498 #define RXDMA_AGG_EN BIT7
500 // USB Rx Aggregation TimeOut settings
501 #define RXDMA_AGG_TIMEOUT_DISABLE 0x00
502 #define RXDMA_AGG_TIMEOUT_17MS 0x01
503 #define RXDMA_AGG_TIMEOUT_17_2_MS 0x02
504 #define RXDMA_AGG_TIMEOUT_17_4_MS 0x04
505 #define RXDMA_AGG_TIMEOUT_17_10_MS 0x0A
507 #define USB_RPWM 0xFE58
509 //============================================================================
510 // 8190 Regsiter offset definition
511 //============================================================================
512 #if 1 // Delete the register later
513 #define AFR 0x010 // AutoLoad Function Register
514 #define BCN_TCFG 0x062 // Beacon Time Configuration
515 #define RATR0 0x320 // Rate Adaptive Table register1
517 // TODO: Remove unused register, We must declare backward compatiable
518 //Undefined register set in 8192S. 0x320/350 DW is useless
519 #define UnusedRegister 0x0320
520 #define PSR UnusedRegister // Page Select Register
522 #define DCAM UnusedRegister // Debug CAM Interface
523 //PHY Configuration related
524 #define BBAddr UnusedRegister // Phy register address register
525 #define PhyDataR UnusedRegister // Phy register data read
526 #define UFWP UnusedRegister
529 //============================================================================
530 // 8192S Regsiter Bit and Content definition
531 //============================================================================
534 // 1. System Configuration Registers (Offset: 0x0000 - 0x003F)
536 //----------------------------------------------------------------------------
537 // 8192S SYS_ISO_CTRL bits (Offset 0x0, 16bit)
538 //----------------------------------------------------------------------------
539 #define ISO_MD2PP BIT0 // MACTOP/BB/PCIe Digital to Power On.
540 #define ISO_PA2PCIE BIT3 // PCIe Analog 1.2V to PCIe 3.3V
541 #define ISO_PLL2MD BIT4 // AFE PLL to MACTOP/BB/PCIe Digital.
542 #define ISO_PWC_DV2RP BIT11 // Digital Vdd to Retention Path
543 #define ISO_PWC_RV2RP BIT12 // LPLDOR12 to Retenrion Path, 1: isolation, 0: attach.
545 //----------------------------------------------------------------------------
546 // 8192S SYS_FUNC_EN bits (Offset 0x2, 16bit)
547 //----------------------------------------------------------------------------
548 #define FEN_MREGEN BIT15 // MAC I/O Registers Enable.
549 #define FEN_DCORE BIT11 // Enable Core Digital.
550 #define FEN_CPUEN BIT10 // Enable CPU Core Digital.
551 // 8192S PMC_FSM bits (Offset 0x4, 32bit)
552 //----------------------------------------------------------------------------
553 #define PAD_HWPD_IDN BIT22 // HWPDN PAD status Indicator
555 //----------------------------------------------------------------------------
557 //----------------------------------------------------------------------------
558 // 8192S SYS_CLKR bits (Offset 0x8, 16bit)
559 //----------------------------------------------------------------------------
560 #define SYS_CLKSEL_80M BIT0 // System Clock 80MHz
561 #define SYS_PS_CLKSEL BIT1 //System power save clock select.
562 #define SYS_CPU_CLKSEL BIT2 // System Clock select, 1: AFE source, 0: System clock(L-Bus)
563 #define SYS_MAC_CLK_EN BIT11 // MAC Clock Enable.
564 #define SYS_SWHW_SEL BIT14 // Load done, control path seitch.
565 #define SYS_FWHW_SEL BIT15 // Sleep exit, control path swith.
568 //----------------------------------------------------------------------------
569 // 8192S Cmd9346CR bits (Offset 0xA, 16bit)
570 //----------------------------------------------------------------------------
571 #define CmdEEPROM_En BIT5 // EEPROM enable when set 1
572 #define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
573 #define Cmd9346CR_9356SEL BIT4
574 #define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL)
575 #define AutoLoadEFUSE CmdEEPROM_En
578 //----------------------------------------------------------------------------
579 // 8192S AFE_MISC bits AFE Misc (Offset 0x10, 8bits)
580 //----------------------------------------------------------------------------
581 #define AFE_MBEN BIT1 // Enable AFE Macro Block's Mbias.
582 #define AFE_BGEN BIT0 // Enable AFE Macro Block's Bandgap.
584 //----------------------------------------------------------------------------
585 // 8192S SPS1_CTRL bits (Offset 0x18-1E, 56bits)
586 //----------------------------------------------------------------------------
587 #define SPS1_SWEN BIT1 // Enable vsps18 SW Macro Block.
588 #define SPS1_LDEN BIT0 // Enable VSPS12 LDO Macro block.
590 //----------------------------------------------------------------------------
591 // 8192S RF_CTRL bits (Offset 0x1F, 8bits)
592 //----------------------------------------------------------------------------
593 #define RF_EN BIT0 // Enable RF module.
594 #define RF_RSTB BIT1 // Reset RF module.
595 #define RF_SDMRSTB BIT2 // Reset RF SDM module.
597 //----------------------------------------------------------------------------
598 // 8192S LDOA15_CTRL bits (Offset 0x20, 8bits)
599 //----------------------------------------------------------------------------
600 #define LDA15_EN BIT0 // Enable LDOA15 Macro Block
602 //----------------------------------------------------------------------------
603 // 8192S LDOV12D_CTRL bits (Offset 0x21, 8bits)
604 //----------------------------------------------------------------------------
605 #define LDV12_EN BIT0 // Enable LDOVD12 Macro Block
606 #define LDV12_SDBY BIT1 // LDOVD12 standby mode
608 //----------------------------------------------------------------------------
609 // 8192S AFE_XTAL_CTRL bits AFE Crystal Control. (Offset 0x26,16bits)
610 //----------------------------------------------------------------------------
611 #define XTAL_GATE_AFE BIT10
612 // Gated Control. 1: AFE Clock source gated, 0: Clock enable.
614 //----------------------------------------------------------------------------
615 // 8192S AFE_PLL_CTRL bits System Function Enable (Offset 0x28,64bits)
616 //----------------------------------------------------------------------------
617 #define APLL_EN BIT0 // Enable AFE PLL Macro Block.
619 // Find which card bus type
620 #define AFR_CardBEn BIT0
621 #define AFR_CLKRUN_SEL BIT1
622 #define AFR_FuncRegEn BIT2
625 // 2. Command Control Registers (Offset: 0x0040 - 0x004F)
627 //----------------------------------------------------------------------------
628 // 8192S (CMD) command register bits (Offset 0x40, 16 bits)
629 //----------------------------------------------------------------------------
630 #define APSDOFF_STATUS BIT15 //
631 #define APSDOFF BIT14 //
632 #define BBRSTn BIT13 //Enable OFDM/CCK
633 #define BB_GLB_RSTn BIT12 //Enable BB
634 #define SCHEDULE_EN BIT10 //Enable MAC scheduler
635 #define MACRXEN BIT9 //
636 #define MACTXEN BIT8 //
637 #define DDMA_EN BIT7 //FW off load function enable
638 #define FW2HW_EN BIT6 //MAC every module reset as below
639 #define RXDMA_EN BIT5 //
640 #define TXDMA_EN BIT4 //
641 #define HCI_RXDMA_EN BIT3 //
642 #define HCI_TXDMA_EN BIT2 //
644 //----------------------------------------------------------------------------
645 // 8192S (TXPAUSE) transmission pause (Offset 0x42, 8 bits)
646 //----------------------------------------------------------------------------
647 #define StopHCCA BIT6
648 #define StopHigh BIT5
655 //----------------------------------------------------------------------------
656 // 8192S (LBKMD) LoopBack Mode Select (Offset 0x43, 8 bits)
657 //----------------------------------------------------------------------------
659 // [3] no buffer, 1: no delay, 0: delay; [2] dmalbk, [1] no_txphy, [0] diglbk.
661 // 1011: MAC loopback (involving CPU)
662 // 0011: MAC Delay Loopback
663 // 0001: PHY loopback (not yet implemented)
664 // 0111: DMA loopback (only uses TxPktBuffer and DMA engine)
665 // All other combinations are reserved.
668 #define LBK_NORMAL 0x00
669 #define LBK_MAC_LB (BIT0|BIT1|BIT3)
670 #define LBK_MAC_DLB (BIT0|BIT1)
671 #define LBK_DMA_LB (BIT0|BIT1|BIT2)
673 //----------------------------------------------------------------------------
674 // 8192S (TCR) transmission Configuration Register (Offset 0x44, 32 bits)
675 //----------------------------------------------------------------------------
676 #define TCP_OFDL_EN BIT25 //For CE packet conversion
677 #define HWPC_TX_EN BIT24 //""
678 #define TXDMAPRE2FULL BIT23 //TXDMA enable pre2full sync
679 #define DISCW BIT20 //CW disable
680 #define TCRICV BIT19 //Append ICV or not
681 #define CfendForm BIT17 //AP mode
682 #define TCRCRC BIT16 //Append CRC32
683 #define FAKE_IMEM_EN BIT15 //
684 #define TSFRST BIT9 //
685 #define TSFEN BIT8 //
686 // For TCR FW download ready --> write by FW Bit0-7 must all one
687 #define FWALLRDY (BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7)
691 #define DMEM_CODE_DONE BIT4
692 #define EXT_IMEM_CHK_RPT BIT3
693 #define EXT_IMEM_CODE_DONE BIT2
694 #define IMEM_CHK_RPT BIT1
695 #define IMEM_CODE_DONE BIT0
696 // Copy fomr 92SU definition
697 #define IMEM_CODE_DONE BIT0
698 #define IMEM_CHK_RPT BIT1
699 #define EMEM_CODE_DONE BIT2
700 #define EMEM_CHK_RPT BIT3
701 #define DMEM_CODE_DONE BIT4
702 #define IMEM_RDY BIT5
705 #define LOAD_FW_READY (IMEM_CODE_DONE|IMEM_CHK_RPT|EMEM_CODE_DONE|\
706 EMEM_CHK_RPT|DMEM_CODE_DONE|IMEM_RDY|BASECHG|\
708 #define TCR_TSFEN BIT8 // TSF function on or off.
709 #define TCR_TSFRST BIT9 // Reset TSF function to zero.
710 #define TCR_FAKE_IMEM_EN BIT15
711 #define TCR_CRC BIT16
712 #define TCR_ICV BIT19 // Integrity Check Value.
713 #define TCR_DISCW BIT20 // Disable Contention Windows Backoff.
714 #define TCR_HWPC_TX_EN BIT24
715 #define TCR_TCP_OFDL_EN BIT25
716 #define TXDMA_INIT_VALUE (IMEM_CHK_RPT|EXT_IMEM_CHK_RPT)
717 //----------------------------------------------------------------------------
718 // 8192S (RCR) Receive Configuration Register (Offset 0x48, 32 bits)
719 //----------------------------------------------------------------------------
720 #define RCR_APPFCS BIT31 //WMAC append FCS after pauload
721 #define RCR_DIS_ENC_2BYTE BIT30 //HW encrypt 2 or 1 byte mode
722 #define RCR_DIS_AES_2BYTE BIT29 //
723 #define RCR_HTC_LOC_CTRL BIT28 //MFC<--HTC=1 MFC-->HTC=0
724 #define RCR_ENMBID BIT27 //Enable Multiple BssId.
725 #define RCR_RX_TCPOFDL_EN BIT26 //
726 #define RCR_APP_PHYST_RXFF BIT25 //
727 #define RCR_APP_PHYST_STAFF BIT24 //
728 #define RCR_CBSSID BIT23 //Accept BSSID match packet
729 #define RCR_APWRMGT BIT22 //Accept power management packet
730 #define RCR_ADD3 BIT21 //Accept address 3 match packet
731 #define RCR_AMF BIT20 //Accept management type frame
732 #define RCR_ACF BIT19 //Accept control type frame
733 #define RCR_ADF BIT18 //Accept data type frame
734 #define RCR_APP_MIC BIT17 //
735 #define RCR_APP_ICV BIT16 //
736 #define RCR_RXFTH BIT13 //Rx FIFO Threshold Bot 13 - 15
737 #define RCR_AICV BIT12 //Accept ICV error packet
738 #define RCR_RXDESC_LK_EN BIT11 //Accept to update rx desc length
739 #define RCR_APP_BA_SSN BIT6 //Accept BA SSN
740 #define RCR_ACRC32 BIT5 //Accept CRC32 error packet
741 #define RCR_RXSHFT_EN BIT4 //Accept broadcast packet
742 #define RCR_AB BIT3 //Accept broadcast packet
743 #define RCR_AM BIT2 //Accept multicast packet
744 #define RCR_APM BIT1 //Accept physical match packet
745 #define RCR_AAP BIT0 //Accept all unicast packet
746 #define RCR_MXDMA_OFFSET 8
747 #define RCR_FIFO_OFFSET 13
749 #define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
750 #define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
751 #define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
752 #define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
754 //----------------------------------------------------------------------------
755 // 8192S (MSR) Media Status Register (Offset 0x4C, 8 bits)
756 //----------------------------------------------------------------------------
760 01: Link in ad hoc network
761 10: Link in infrastructure network
765 #define MSR_NOLINK 0x00
766 #define MSR_ADHOC 0x01
767 #define MSR_INFRA 0x02
770 //----------------------------------------------------------------------------
771 // 8192S (SYSF_CFG) system Fucntion Config Reg (Offset 0x4D, 8 bits)
772 //----------------------------------------------------------------------------
775 #define BTMODE (BIT2|BIT1)
778 //----------------------------------------------------------------------------
779 // 8192S (MBIDCTRL) MBSSID Control Register (Offset 0x4F, 8 bits)
780 //----------------------------------------------------------------------------
782 #define BCNUM (BIT6|BIT5|BIT4)
785 // 3. MACID Setting Registers (Offset: 0x0050 - 0x007F)
789 // 4. Timing Control Registers (Offset: 0x0080 - 0x009F)
791 //----------------------------------------------------------------------------
792 // 8192S (USTIME) US Time Tunning Register (Offset 0x8A, 16 bits)
793 //----------------------------------------------------------------------------
794 #define USTIME_EDCA 0xFF00
795 #define USTIME_TSF 0x00FF
797 //----------------------------------------------------------------------------
798 // 8192S (SIFS_CCK/OFDM) US Time Tunning Register (Offset 0x8C/8E,16 bits)
799 //----------------------------------------------------------------------------
800 #define SIFS_TRX 0xFF00
801 #define SIFS_CTX 0x00FF
803 //----------------------------------------------------------------------------
804 // 8192S (DRVERLYINT) Driver Early Interrupt Reg (Offset 0x98, 16bit)
805 //----------------------------------------------------------------------------
806 #define ENSWBCN BIT15
807 #define DRVERLY_TU 0x0FF0
808 #define DRVERLY_US 0x000F
809 #define BCN_TCFG_CW_SHIFT 8
810 #define BCN_TCFG_IFS 0
813 // 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F)
817 // 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
819 //----------------------------------------------------------------------------
820 // 8192S Response Rate Set Register (offset 0x181, 24bits)
821 //----------------------------------------------------------------------------
822 #define RRSR_RSC_OFFSET 21
823 #define RRSR_SHORT_OFFSET 23
824 #define RRSR_RSC_BW_40M 0x600000
825 #define RRSR_RSC_UPSUBCHNL 0x400000
826 #define RRSR_RSC_LOWSUBCHNL 0x200000
827 #define RRSR_SHORT 0x800000
830 #define RRSR_5_5M BIT2
831 #define RRSR_11M BIT3
834 #define RRSR_12M BIT6
835 #define RRSR_18M BIT7
836 #define RRSR_24M BIT8
837 #define RRSR_36M BIT9
838 #define RRSR_48M BIT10
839 #define RRSR_54M BIT11
840 #define RRSR_MCS0 BIT12
841 #define RRSR_MCS1 BIT13
842 #define RRSR_MCS2 BIT14
843 #define RRSR_MCS3 BIT15
844 #define RRSR_MCS4 BIT16
845 #define RRSR_MCS5 BIT17
846 #define RRSR_MCS6 BIT18
847 #define RRSR_MCS7 BIT19
848 #define BRSR_AckShortPmb BIT23
850 #define RRSR_RSC_UPSUBCHANL 0x200000
851 // CCK ACK: use Short Preamble or not
853 //----------------------------------------------------------------------------
854 // 8192S Rate Definition
855 //----------------------------------------------------------------------------
857 #define RATR_1M 0x00000001
858 #define RATR_2M 0x00000002
859 #define RATR_55M 0x00000004
860 #define RATR_11M 0x00000008
862 #define RATR_6M 0x00000010
863 #define RATR_9M 0x00000020
864 #define RATR_12M 0x00000040
865 #define RATR_18M 0x00000080
866 #define RATR_24M 0x00000100
867 #define RATR_36M 0x00000200
868 #define RATR_48M 0x00000400
869 #define RATR_54M 0x00000800
870 //MCS 1 Spatial Stream
871 #define RATR_MCS0 0x00001000
872 #define RATR_MCS1 0x00002000
873 #define RATR_MCS2 0x00004000
874 #define RATR_MCS3 0x00008000
875 #define RATR_MCS4 0x00010000
876 #define RATR_MCS5 0x00020000
877 #define RATR_MCS6 0x00040000
878 #define RATR_MCS7 0x00080000
879 //MCS 2 Spatial Stream
880 #define RATR_MCS8 0x00100000
881 #define RATR_MCS9 0x00200000
882 #define RATR_MCS10 0x00400000
883 #define RATR_MCS11 0x00800000
884 #define RATR_MCS12 0x01000000
885 #define RATR_MCS13 0x02000000
886 #define RATR_MCS14 0x04000000
887 #define RATR_MCS15 0x08000000
889 #define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
890 #define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\
891 RATR_36M|RATR_48M|RATR_54M
892 #define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\
893 RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7
894 #define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11|\
895 RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
898 // 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF)
900 //----------------------------------------------------------------------------
901 // 8192S EDCA Setting (offset 0x1D0-1DF, 4DW VO/VI/BE/BK)
902 //----------------------------------------------------------------------------
903 #define AC_PARAM_TXOP_LIMIT_OFFSET 16
904 #define AC_PARAM_ECW_MAX_OFFSET 12
905 #define AC_PARAM_ECW_MIN_OFFSET 8
906 #define AC_PARAM_AIFS_OFFSET 0
908 //----------------------------------------------------------------------------
909 // 8192S AcmHwCtrl bits (offset 0x1E7, 1 byte)
910 //----------------------------------------------------------------------------
911 #define AcmHw_HwEn BIT0
912 #define AcmHw_BeqEn BIT1
913 #define AcmHw_ViqEn BIT2
914 #define AcmHw_VoqEn BIT3
915 #define AcmHw_BeqStatus BIT4
916 #define AcmHw_ViqStatus BIT5
917 #define AcmHw_VoqStatus BIT6
919 //----------------------------------------------------------------------------
920 // 8192S Retry Limit (Offset 0x1F4, 16bit)
921 //----------------------------------------------------------------------------
922 #define RETRY_LIMIT_SHORT_SHIFT 8
923 #define RETRY_LIMIT_LONG_SHIFT 0
926 // 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F)
928 //----------------------------------------------------------------------------
929 // 8192S NAV_CTRL bits (Offset 0x200, 24bit)
930 //----------------------------------------------------------------------------
931 #define NAV_UPPER_EN BIT16
932 #define NAV_UPPER 0xFF00
933 #define NAV_RTSRST 0xFF
934 //----------------------------------------------------------------------------
935 // 8192S BW_OPMODE bits (Offset 0x203, 8bit)
936 //----------------------------------------------------------------------------
937 #define BW_OPMODE_20MHZ BIT2
938 #define BW_OPMODE_5G BIT1
939 #define BW_OPMODE_11J BIT0
940 //----------------------------------------------------------------------------
941 // 8192S BW_OPMODE bits (Offset 0x230, 4 Byte)
942 //----------------------------------------------------------------------------
943 #define RXERR_RPT_RST BIT27 // Write "one" to set the counter to zero.
945 #define RXERR_OFDM_PPDU 0
946 #define RXERR_OFDM_FALSE_ALARM 1
947 #define RXERR_OFDM_MPDU_OK 2
948 #define RXERR_OFDM_MPDU_FAIL 3
949 #define RXERR_CCK_PPDU 4
950 #define RXERR_CCK_FALSE_ALARM 5
951 #define RXERR_CCK_MPDU_OK 6
952 #define RXERR_CCK_MPDU_FAIL 7
953 #define RXERR_HT_PPDU 8
954 #define RXERR_HT_FALSE_ALARM 9
955 #define RXERR_HT_MPDU_TOTAL 10
956 #define RXERR_HT_MPDU_OK 11
957 #define RXERR_HT_MPDU_FAIL 12
958 #define RXERR_RX_FULL_DROP 15
961 // 9. Security Control Registers (Offset: 0x0240 - 0x025F)
963 //----------------------------------------------------------------------------
964 // 8192S RWCAM CAM Command Register (offset 0x240, 4 byte)
965 //----------------------------------------------------------------------------
966 #define CAM_CM_SecCAMPolling BIT31 //Security CAM Polling
967 #define CAM_CM_SecCAMClr BIT30 //Clear all bits in CAM
968 #define CAM_CM_SecCAMWE BIT16 //Security CAM enable
969 #define CAM_ADDR 0xFF //CAM Address Offset
971 //----------------------------------------------------------------------------
972 // 8192S CAMDBG Debug CAM Register (offset 0x24C, 4 byte)
973 //----------------------------------------------------------------------------
974 #define Dbg_CAM_TXSecCAMInfo BIT31 //Retrieve lastest Tx Info
975 #define Dbg_CAM_SecKeyFound BIT30 //Security KEY Found
978 //----------------------------------------------------------------------------
979 // 8192S SECR Security Configuration Register (offset 0x250, 1 byte)
980 //----------------------------------------------------------------------------
981 #define SCR_TxUseDK BIT0 //Force Tx Use Default Key
982 #define SCR_RxUseDK BIT1 //Force Rx Use Default Key
983 #define SCR_TxEncEnable BIT2 //Enable Tx Encryption
984 #define SCR_RxDecEnable BIT3 //Enable Rx Decryption
985 #define SCR_SKByA2 BIT4 //Search kEY BY A2
986 #define SCR_NoSKMC BIT5 //No Key Search Multicast
987 //----------------------------------------------------------------------------
988 // 8192S CAM Config Setting (offset 0x250, 1 byte)
989 //----------------------------------------------------------------------------
990 #define CAM_VALID BIT15
991 #define CAM_NOTVALID 0x0000
992 #define CAM_USEDK BIT5
995 #define CAM_WEP40 0x01
996 #define CAM_TKIP 0x02
998 #define CAM_WEP104 0x05
1000 #define TOTAL_CAM_ENTRY 32
1002 #define CAM_CONFIG_USEDK TRUE
1003 #define CAM_CONFIG_NO_USEDK FALSE
1005 #define CAM_WRITE BIT16
1006 #define CAM_READ 0x00000000
1007 #define CAM_POLLINIG BIT31
1009 #define SCR_UseDK 0x01
1010 #define SCR_TxSecEnable 0x02
1011 #define SCR_RxSecEnable 0x04
1014 // 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF)
1016 #define WOW_PMEN BIT0 // Power management Enable.
1017 #define WOW_WOMEN BIT1 // WoW function on or off.
1018 #define WOW_MAGIC BIT2 // Magic packet
1019 #define WOW_UWF BIT3 // Unicast Wakeup frame.
1022 // 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)
1023 // 8192S GPIO Config Setting (offset 0x2F1, 1 byte)
1024 //----------------------------------------------------------------------------
1025 #define GPIOMUX_EN BIT3 // When this bit is set to "1", GPIO PINs will switch to MAC GPIO Function
1026 #define GPIOSEL_GPIO 0 // UART or JTAG or pure GPIO
1027 #define GPIOSEL_PHYDBG 1 // PHYDBG
1028 #define GPIOSEL_BT 2 // BT_coex
1029 #define GPIOSEL_WLANDBG 3 // WLANDBG
1030 #define GPIOSEL_GPIO_MASK ~(BIT0|BIT1)
1032 //----------------------------------------------------------------------------
1034 //----------------------------------------------------------------------------
1035 // PHY REG Access Report Register definition
1036 //----------------------------------------------------------------------------
1037 #define HST_RDBUSY BIT0
1038 #define CPU_WTBUSY BIT1
1041 // 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
1043 //----------------------------------------------------------------------------
1044 // 8190 IMR/ISR bits (offset 0xfd, 8bits)
1045 //----------------------------------------------------------------------------
1046 #define IMR8190_DISABLED 0x0
1049 #define IMR_CPUERR BIT5 // CPU error interrupt
1050 #define IMR_ATIMEND BIT4 // ATIM Window End Interrupt
1051 #define IMR_TBDOK BIT3 // Transmit Beacon OK Interrupt
1052 #define IMR_TBDER BIT2 // Transmit Beacon Error Interrupt
1053 #define IMR_BCNDMAINT8 BIT1 // Beacon DMA Interrupt 8
1054 #define IMR_BCNDMAINT7 BIT0 // Beacon DMA Interrupt 7
1057 #define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6
1058 #define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5
1059 #define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4
1060 #define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3
1061 #define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2
1062 #define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1
1063 #define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8
1064 #define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7
1065 #define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6
1066 #define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5
1067 #define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4
1068 #define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3
1069 #define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2
1070 #define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1
1071 #define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2
1072 #define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1
1073 #define IMR_TXFOVW BIT15 // Transmit FIFO Overflow
1074 #define IMR_PSTIMEOUT BIT14 // Power save time out interrupt
1075 #define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0
1076 #define IMR_RXFOVW BIT12 // Receive FIFO Overflow
1077 #define IMR_RDU BIT11 // Receive Descriptor Unavailable
1078 #define IMR_RXCMDOK BIT10 // Receive Command Packet OK
1079 #define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup
1080 #define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt
1081 #define IMR_COMDOK BIT7 // Command Queue DMA OK Interrupt
1082 #define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt
1083 #define IMR_HCCADOK BIT5 // HCCA Queue DMA OK Interrupt
1084 #define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt
1085 #define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt
1086 #define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt
1087 #define IMR_VODOK BIT1 // AC_VO DMA Interrupt
1088 #define IMR_ROK BIT0 // Receive DMA OK Interrupt
1091 // 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F)
1095 // 14. PCIE config register (Offset 0x500-)
1097 //----------------------------------------------------------------------------
1098 // 8190 TPPool bits (offset 0xd9, 2 byte)
1099 //----------------------------------------------------------------------------
1100 #define TPPoll_BKQ BIT0 // BK queue polling
1101 #define TPPoll_BEQ BIT1 // BE queue polling
1102 #define TPPoll_VIQ BIT2 // VI queue polling
1103 #define TPPoll_VOQ BIT3 // VO queue polling
1104 #define TPPoll_BQ BIT4 // Beacon queue polling
1105 #define TPPoll_CQ BIT5 // Command queue polling
1106 #define TPPoll_MQ BIT6 // Management queue polling
1107 #define TPPoll_HQ BIT7 // High queue polling
1108 #define TPPoll_HCCAQ BIT8 // HCCA queue polling
1109 #define TPPoll_StopBK BIT9 // Stop BK queue
1110 #define TPPoll_StopBE BIT10 // Stop BE queue
1111 #define TPPoll_StopVI BIT11 // Stop VI queue
1112 #define TPPoll_StopVO BIT12 // Stop VO queue
1113 #define TPPoll_StopMgt BIT13 // Stop Mgnt queue
1114 #define TPPoll_StopHigh BIT14 // Stop High queue
1115 #define TPPoll_StopHCCA BIT15 // Stop HCCA queue
1116 #define TPPoll_SHIFT 8 // Queue ID mapping
1118 //----------------------------------------------------------------------------
1119 // 8192S PCIF (Offset 0x500, 32bit)
1120 //----------------------------------------------------------------------------
1121 #define MXDMA2_16bytes 0x000
1122 #define MXDMA2_32bytes 0x001
1123 #define MXDMA2_64bytes 0x010
1124 #define MXDMA2_128bytes 0x011
1125 #define MXDMA2_256bytes 0x100
1126 #define MXDMA2_512bytes 0x101
1127 #define MXDMA2_1024bytes 0x110
1128 #define MXDMA2_NoLimit 0x7
1130 #define MULRW_SHIFT 3
1131 #define MXDMA2_RX_SHIFT 4
1132 #define MXDMA2_TX_SHIFT 0
1134 //----------------------------------------------------------------------------
1135 // 8190 CCX_COMMAND_REG Setting (offset 0x25A, 1 byte)
1136 //----------------------------------------------------------------------------
1137 #define CCX_CMD_CLM_ENABLE BIT0 // Enable Channel Load
1138 #define CCX_CMD_NHM_ENABLE BIT1 // Enable Noise Histogram
1139 #define CCX_CMD_FUNCTION_ENABLE BIT8
1140 // CCX function (Channel Load/RPI/Noise Histogram).
1141 #define CCX_CMD_IGNORE_CCA BIT9
1142 // Treat CCA period as IDLE time for NHM.
1143 #define CCX_CMD_IGNORE_TXON BIT10
1144 // Treat TXON period as IDLE time for NHM.
1145 #define CCX_CLM_RESULT_READY BIT16
1146 // 1: Indicate the result of Channel Load is ready.
1147 #define CCX_NHM_RESULT_READY BIT16
1148 // 1: Indicate the result of Noise histogram is ready.
1149 #define CCX_CMD_RESET 0x0
1150 // Clear all the result of CCX measurement and disable the CCX function.
1153 //----------------------------------------------------------------------------
1155 //----------------------------------------------------------------------------
1156 //#define HWSET_MAX_SIZE_92S 128
1159 //----------------------------------------------------------------------------
1160 // 8192S EEPROM/EFUSE share register definition.
1161 //----------------------------------------------------------------------------
1163 //----------------------------------------------------------------------------
1164 // 8192S EEROM and Compatible E-Fuse definition. Added by Roger, 2008.10.21.
1165 //----------------------------------------------------------------------------
1166 #define RTL8190_EEPROM_ID 0x8129
1167 #define EEPROM_HPON 0x02 // LDO settings.
1168 #define EEPROM_VID 0x08 // USB Vendor ID.
1169 #define EEPROM_PID 0x0A // USB Product ID.
1170 #define EEPROM_USB_OPTIONAL 0x0C // For optional function.
1171 #define EEPROM_USB_PHY_PARA1 0x0D // For fine tune USB PHY.
1172 #define EEPROM_NODE_ADDRESS_BYTE_0 0x12 // MAC address.
1173 #define EEPROM_TxPowerDiff 0x1F
1175 #define EEPROM_Version 0x50
1176 #define EEPROM_ChannelPlan 0x51 // Map of supported channels.
1177 #define EEPROM_CustomID 0x52
1178 #define EEPROM_SubCustomID 0x53 // Reserved for customer use.
1181 // <Roger_Notes> The followin are for different version of EEPROM contents purpose. 2008.11.22.
1182 #define EEPROM_BoardType 0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
1183 #define EEPROM_TxPwIndex 0x55 //0x55-0x66, Tx Power index.
1184 #define EEPROM_PwDiff 0x67 // Difference of gain index between legacy and high throughput OFDM.
1185 #define EEPROM_ThermalMeter 0x68 // Thermal meter default value.
1186 #define EEPROM_CrystalCap 0x69 // Crystal Cap.
1187 #define EEPROM_TxPowerBase 0x6a // Tx Power of serving station.
1188 #define EEPROM_TSSI_A 0x6b //TSSI value of path A.
1189 #define EEPROM_TSSI_B 0x6c //TSSI value of path B.
1190 #define EEPROM_TxPwTkMode 0x6d //Tx Power tracking mode.
1191 //#define EEPROM_Reserved 0x6e //0x6e-0x7f, reserved.
1193 // 2009/02/09 Cosa Add for SD3 requirement
1194 #define EEPROM_TX_PWR_HT20_DIFF 0x6e// HT20 Tx Power Index Difference
1195 #define DEFAULT_HT20_TXPWR_DIFF 2 // HT20<->40 default Tx Power Index Difference
1196 #define EEPROM_TX_PWR_OFDM_DIFF 0x71// OFDM Tx Power Index Difference
1197 #define EEPROM_TX_PWR_BAND_EDGE 0x73// TX Power offset at band-edge channel
1198 #define TX_PWR_BAND_EDGE_CHK 0x79// Check if band-edge scheme is enabled
1199 #define EEPROM_Default_LegacyHTTxPowerDiff 0x3
1200 #define EEPROM_USB_Default_OPTIONAL_FUNC 0x8
1201 #define EEPROM_USB_Default_PHY_PARAM 0x0
1202 #define EEPROM_Default_TSSI 0x0
1203 #define EEPROM_Default_TxPwrTkMode 0x0
1204 #define EEPROM_Default_TxPowerDiff 0x0
1205 #define EEPROM_Default_TxPowerBase 0x0
1206 #define EEPROM_Default_ThermalMeter 0x7
1207 #define EEPROM_Default_PwDiff 0x4
1208 #define EEPROM_Default_CrystalCap 0x5
1209 #define EEPROM_Default_TxPower 0x1010
1210 #define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192SU(QFPN68)
1211 #define EEPROM_Default_HT2T_TxPwr 0x10
1212 #define EEPROM_USB_SN BIT0
1213 #define EEPROM_USB_REMOTE_WAKEUP BIT1
1214 #define EEPROM_USB_DEVICE_PWR BIT2
1215 #define EEPROM_EP_NUMBER (BIT3|BIT4)
1217 #define EEPROM_CHANNEL_PLAN_FCC 0x0
1218 #define EEPROM_CHANNEL_PLAN_IC 0x1
1219 #define EEPROM_CHANNEL_PLAN_ETSI 0x2
1220 #define EEPROM_CHANNEL_PLAN_SPAIN 0x3
1221 #define EEPROM_CHANNEL_PLAN_FRANCE 0x4
1222 #define EEPROM_CHANNEL_PLAN_MKK 0x5
1223 #define EEPROM_CHANNEL_PLAN_MKK1 0x6
1224 #define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
1225 #define EEPROM_CHANNEL_PLAN_TELEC 0x8
1226 #define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
1227 #define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
1228 #define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
1229 #define EEPROM_CID_DEFAULT 0x0
1230 #define EEPROM_CID_ALPHA 0x1
1231 #define EEPROM_CID_Senao 0x3
1232 #define EEPROM_CID_CAMEO 0X8
1233 #define EEPROM_CID_SITECOM 0x9
1234 #define EEPROM_CID_COREGA 0xB
1235 #define EEPROM_CID_EDIMAX_BELKIN 0xC
1236 #define EEPROM_CID_SERCOMM_BELKIN 0xE
1237 #define EEPROM_CID_CAMEO1 0xF
1238 #define EEPROM_CID_WHQL 0xFE
1239 #define EEPROM_CID_NetCore 0x5
1242 //-----------------------------------------------------------------
1243 // 0x2c0 FW Command Control register definition, added by Roger, 2008.11.27.
1244 //-----------------------------------------------------------------
1245 #define FW_DIG_DISABLE 0xfd00cc00
1246 #define FW_DIG_ENABLE 0xfd000000
1247 #define FW_DIG_HALT 0xfd000001
1248 #define FW_DIG_RESUME 0xfd000002
1249 #define FW_HIGH_PWR_DISABLE 0xfd000008
1250 #define FW_HIGH_PWR_ENABLE 0xfd000009
1251 #define FW_TXPWR_TRACK_ENABLE 0xfd000017
1252 #define FW_TXPWR_TRACK_DISABLE 0xfd000018
1253 #define FW_TXPWR_TRACK_THERMAL 0xfd000019
1254 #define FW_RA_INIT 0xfd000026
1255 #define FW_RA_IOT_BG_COMB 0xfd000030
1256 #define FW_RA_IOT_N_COMB 0xfd000031
1257 #define FW_RA_REFRESH 0xfd0000a0
1258 #define FW_RA_DISABLE 0xfd0000a4
1259 #define FW_RA_ACTIVE 0xfd0000a6
1260 #define FW_RA_DISABLE_RSSI_MASK 0xfd0000ac
1261 #define FW_RA_ENABLE_RSSI_MASK 0xfd0000ad
1262 #define FW_RA_RESET 0xfd0000af
1263 #define FW_DM_DISABLE 0xfd00aa00
1264 #define FW_IQK_ENABLE 0xf0000020
1265 #define FW_IQK_SUCCESS 0x0000dddd
1266 #define FW_IQK_FAIL 0x0000ffff
1267 #define FW_OP_FAILURE 0xffffffff
1268 #define FW_TX_FEEDBACK_NONE 0xfb000000
1269 #define FW_TX_FEEDBACK_DTM_ENABLE (FW_TX_FEEDBACK_NONE | 0x1)
1270 #define FW_TX_FEEDBACK_CCX_ENABLE (FW_TX_FEEDBACK_NONE | 0x2)
1271 #define FW_BB_RESET_ENABLE 0xff00000d
1272 #define FW_BB_RESET_DISABLE 0xff00000e
1273 #define FW_LPS_ENTER 0xfe000010
1274 #define FW_LPS_LEAVE 0xfe000011
1275 #define FW_INDIRECT_READ 0xf2000000
1276 #define FW_INDIRECT_WRITE 0xf2000001
1277 #define FW_TXANT_SWITCH_ENABLE 0xfd000023
1278 #define FW_TXANT_SWITCH_DISABLE 0xfd000024
1280 //--------------92SU require delete or move to other place later
1287 // 2008/08/06 MH For share the same 92S source/header files, we copy some
1288 // definition to pass 92SU compiler. But we must delete thm later.
1292 //============================================================================
1293 // 819xUsb Regsiter offset definition
1294 //============================================================================
1296 //2 define it temp!!!
1297 #define RFPC 0x5F // Rx FIFO Packet Count
1298 #define RCR_9356SEL BIT6
1299 #define TCR_LRL_OFFSET 0
1300 #define TCR_SRL_OFFSET 8
1301 #define TCR_MXDMA_OFFSET 21
1302 #define TCR_MXDMA_2048 7
1303 #define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer
1304 #define RCR_MXDMA_OFFSET 8
1305 #define RCR_FIFO_OFFSET 13
1306 #define RCR_OnlyErlPkt BIT31 // Rx Early mode is performed for packet size greater than 1536
1307 #define CWR 0xDC // Contention window register
1308 #define RetryCTR 0xDE // Retry Count register
1311 // For backward compatible for 9xUSB
1312 #define LED1Cfg UnusedRegister // LED1 Configuration Register
1313 #define LED0Cfg UnusedRegister // LED0 Configuration Register
1314 #define GPI UnusedRegister // LED0 Configuration Register
1315 #define BRSR UnusedRegister // LED0 Configuration Register
1316 #define CPU_GEN UnusedRegister // LED0 Configuration Register
1317 #define SIFS UnusedRegister // LED0 Configuration Register
1319 //----------------------------------------------------------------------------
1320 // 8190 CPU General Register (offset 0x100, 4 byte)
1321 //----------------------------------------------------------------------------
1322 //#define CPU_CCK_LOOPBACK 0x00030000
1323 #define CPU_GEN_SYSTEM_RESET 0x00000001
1324 //#define CPU_GEN_FIRMWARE_RESET 0x00000008
1325 //#define CPU_GEN_BOOT_RDY 0x00000010
1326 //#define CPU_GEN_FIRM_RDY 0x00000020
1327 //#define CPU_GEN_PUT_CODE_OK 0x00000080
1328 //#define CPU_GEN_BB_RST 0x00000100
1329 //#define CPU_GEN_PWR_STB_CPU 0x00000004
1330 //#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
1331 //#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
1333 //----------------------------------------------------------------------------
1335 //----------------------------------------------------------------------------
1337 //#define RTL8190_EEPROM_ID 0x8129
1338 //#define EEPROM_VID 0x08
1339 //#define EEPROM_PID 0x0A
1340 //#define EEPROM_USB_OPTIONAL 0x0C
1341 //#define EEPROM_NODE_ADDRESS_BYTE_0 0x12
1343 //#define EEPROM_TxPowerDiff 0x1F
1344 //#define EEPROM_ThermalMeter 0x20
1345 //#define EEPROM_PwDiff 0x21 //0x21
1346 //#define EEPROM_CrystalCap 0x22 //0x22
1348 //#define EEPROM_TxPwIndex_CCK 0x23 //0x23
1349 //#define EEPROM_TxPwIndex_OFDM_24G 0x24 //0x24~0x26
1350 #define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B
1351 #define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E
1352 #define EEPROM_TxPwIndex_Ver 0x27 //0x27
1354 //#define EEPROM_Default_TxPowerDiff 0x0
1355 //#define EEPROM_Default_ThermalMeter 0x7
1356 //#define EEPROM_Default_PwDiff 0x4
1357 //#define EEPROM_Default_CrystalCap 0x5
1358 //#define EEPROM_Default_TxPower 0x1010
1359 //#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
1360 //#define EEPROM_Version 0x50 // 0x50
1361 //#define EEPROM_CustomID 0x52
1362 //#define EEPROM_ChannelPlan 0x7c //0x7C
1363 //#define EEPROM_IC_VER 0x7d //0x7D
1364 //#define EEPROM_CRC 0x7e //0x7E~0x7F
1367 //#define EEPROM_CID_DEFAULT 0x0
1368 //#define EEPROM_CID_CAMEO 0x1
1369 //#define EEPROM_CID_RUNTOP 0x2
1370 //#define EEPROM_CID_Senao 0x3
1371 //#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31
1372 //#define EEPROM_CID_NetCore 0x5
1376 //--------------92SU require delete or move to other place later
1379 //============================================================
1380 // CCX Related Register
1381 //============================================================
1382 #define CCX_COMMAND_REG 0x890
1383 // CCX Measurement Command Register. 4 Bytes.
1384 // Bit[0]: R_CLM_En, 1=enable, 0=disable. Enable or disable "Channel Load
1385 // Measurement (CLM)".
1386 // Bit[1]: R_NHM_En, 1=enable, 0=disable. Enable or disalbe "Noise Histogram
1387 // Measurement (NHM)".
1388 // Bit[2~7]: Reserved
1389 // Bit[8]: R_CCX_En: 1=enable, 0=disable. Enable or disable CCX function.
1390 // Note: After clearing this bit, all the result of all NHM_Result and CLM_
1391 // Result are cleared concurrently.
1392 // Bit[9]: R_Ignore_CCA: 1=enable, 0=disable. Enable means that treat CCA
1393 // period as idle time for NHM.
1394 // Bit[10]: R_Ignore_TXON: 1=enable, 0=disable. Enable means that treat TXON
1395 // period as idle time for NHM.
1396 // Bit[11~31]: Reserved.
1397 #define CLM_PERIOD_REG 0x894
1398 // CCX Measurement Period Register, in unit of 4us. 2 Bytes.
1399 #define NHM_PERIOD_REG 0x896
1400 // Noise Histogram Measurement Period Register, in unit of 4us. 2Bytes.
1401 #define NHM_THRESHOLD0 0x898 // Noise Histogram Meashorement0
1402 #define NHM_THRESHOLD1 0x899 // Noise Histogram Meashorement1
1403 #define NHM_THRESHOLD2 0x89A // Noise Histogram Meashorement2
1404 #define NHM_THRESHOLD3 0x89B // Noise Histogram Meashorement3
1405 #define NHM_THRESHOLD4 0x89C // Noise Histogram Meashorement4
1406 #define NHM_THRESHOLD5 0x89D // Noise Histogram Meashorement5
1407 #define NHM_THRESHOLD6 0x89E // Noise Histogram Meashorement6
1408 #define CLM_RESULT_REG 0x8D0
1409 // Channel Load result register. 4 Bytes.
1410 // Bit[0~15]: Total measured duration of CLM. The CCA busy fraction is caculate
1411 // by CLM_RESULT_REG/CLM_PERIOD_REG.
1412 // Bit[16]: Indicate the CLM result is ready.
1413 // Bit[17~31]: Reserved.
1414 #define NHM_RESULT_REG 0x8D4
1415 // Noise Histogram result register. 4 Bytes.
1416 // Bit[0~15]: Total measured duration of NHM. If R_Ignore_CCA=1 or
1417 // R_Ignore_TXON=1, this value will be less than NHM_PERIOD_REG.
1418 // Bit[16]: Indicate the NHM result is ready.
1419 // Bit[17~31]: Reserved.
1420 #define NHM_RPI_COUNTER0 0x8D8
1421 // NHM RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
1422 #define NHM_RPI_COUNTER1 0x8D9
1423 // NHM RPI counter1, the fraction of signal stren in NHM_THRESH0, NHM_THRESH1
1424 #define NHM_RPI_COUNTER2 0x8DA
1425 // NHM RPI counter2, the fraction of signal stren in NHM_THRESH2, NHM_THRESH3
1426 #define NHM_RPI_COUNTER3 0x8DB
1427 // NHM RPI counter3, the fraction of signal stren in NHM_THRESH4, NHM_THRESH5
1428 #define NHM_RPI_COUNTER4 0x8DC
1429 // NHM RPI counter4, the fraction of signal stren in NHM_THRESH6, NHM_THRESH7
1430 #define NHM_RPI_COUNTER5 0x8DD
1431 // NHM RPI counter5, the fraction of signal stren in NHM_THRESH8, NHM_THRESH9
1432 #define NHM_RPI_COUNTER6 0x8DE
1433 // NHM RPI counter6, the fraction of signal stren in NHM_THRESH10, NHM_THRESH11
1434 #define NHM_RPI_COUNTER7 0x8DF
1435 // NHM RPI counter7, the fraction of signal stren in NHM_THRESH12, NHM_THRESH13
1437 #define HAL_RETRY_LIMIT_INFRA 48
1438 #define HAL_RETRY_LIMIT_AP_ADHOC 7
1440 // HW Readio OFF switch (GPIO BIT)
1441 #define HAL_8192S_HW_GPIO_OFF_BIT BIT3
1442 #define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
1443 #define HAL_8192S_HW_GPIO_WPS_BIT BIT4
git.openpandora.org / pandora-kernel.git / blob