drivers/spi/spi-sun6i.c

   1 /*
   2  * Copyright (C) 2012 - 2014 Allwinner Tech
   3  * Pan Nan <pannan@allwinnertech.com>
   4  *
   5  * Copyright (C) 2014 Maxime Ripard
   6  * Maxime Ripard <maxime.ripard@free-electrons.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/device.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/module.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/pm_runtime.h>
  22 #include <linux/reset.h>
  23
  24 #include <linux/spi/spi.h>
  25
  26 #define SUN6I_FIFO_DEPTH                128
  27
  28 #define SUN6I_GBL_CTL_REG               0x04
  29 #define SUN6I_GBL_CTL_BUS_ENABLE                BIT(0)
  30 #define SUN6I_GBL_CTL_MASTER                    BIT(1)
  31 #define SUN6I_GBL_CTL_TP                        BIT(7)
  32 #define SUN6I_GBL_CTL_RST                       BIT(31)
  33
  34 #define SUN6I_TFR_CTL_REG               0x08
  35 #define SUN6I_TFR_CTL_CPHA                      BIT(0)
  36 #define SUN6I_TFR_CTL_CPOL                      BIT(1)
  37 #define SUN6I_TFR_CTL_SPOL                      BIT(2)
  38 #define SUN6I_TFR_CTL_CS_MASK                   0x30
  39 #define SUN6I_TFR_CTL_CS(cs)                    (((cs) << 4) & SUN6I_TFR_CTL_CS_MASK)
  40 #define SUN6I_TFR_CTL_CS_MANUAL                 BIT(6)
  41 #define SUN6I_TFR_CTL_CS_LEVEL                  BIT(7)
  42 #define SUN6I_TFR_CTL_DHB                       BIT(8)
  43 #define SUN6I_TFR_CTL_FBS                       BIT(12)
  44 #define SUN6I_TFR_CTL_XCH                       BIT(31)
  45
  46 #define SUN6I_INT_CTL_REG               0x10
  47 #define SUN6I_INT_CTL_RF_OVF                    BIT(8)
  48 #define SUN6I_INT_CTL_TC                        BIT(12)
  49
  50 #define SUN6I_INT_STA_REG               0x14
  51
  52 #define SUN6I_FIFO_CTL_REG              0x18
  53 #define SUN6I_FIFO_CTL_RF_RST                   BIT(15)
  54 #define SUN6I_FIFO_CTL_TF_RST                   BIT(31)
  55
  56 #define SUN6I_FIFO_STA_REG              0x1c
  57 #define SUN6I_FIFO_STA_RF_CNT_MASK              0x7f
  58 #define SUN6I_FIFO_STA_RF_CNT_BITS              0
  59 #define SUN6I_FIFO_STA_TF_CNT_MASK              0x7f
  60 #define SUN6I_FIFO_STA_TF_CNT_BITS              16
  61
  62 #define SUN6I_CLK_CTL_REG               0x24
  63 #define SUN6I_CLK_CTL_CDR2_MASK                 0xff
  64 #define SUN6I_CLK_CTL_CDR2(div)                 (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)
  65 #define SUN6I_CLK_CTL_CDR1_MASK                 0xf
  66 #define SUN6I_CLK_CTL_CDR1(div)                 (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
  67 #define SUN6I_CLK_CTL_DRS                       BIT(12)
  68
  69 #define SUN6I_BURST_CNT_REG             0x30
  70 #define SUN6I_BURST_CNT(cnt)                    ((cnt) & 0xffffff)
  71
  72 #define SUN6I_XMIT_CNT_REG              0x34
  73 #define SUN6I_XMIT_CNT(cnt)                     ((cnt) & 0xffffff)
  74
  75 #define SUN6I_BURST_CTL_CNT_REG         0x38
  76 #define SUN6I_BURST_CTL_CNT_STC(cnt)            ((cnt) & 0xffffff)
  77
  78 #define SUN6I_TXDATA_REG                0x200
  79 #define SUN6I_RXDATA_REG                0x300
  80
  81 struct sun6i_spi {
  82         struct spi_master       *master;
  83         void __iomem            *base_addr;
  84         struct clk              *hclk;
  85         struct clk              *mclk;
  86         struct reset_control    *rstc;
  87
  88         struct completion       done;
  89
  90         const u8                *tx_buf;
  91         u8                      *rx_buf;
  92         int                     len;
  93 };
  94
  95 static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
  96 {
  97         return readl(sspi->base_addr + reg);
  98 }
  99
 100 static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
 101 {
 102         writel(value, sspi->base_addr + reg);
 103 }
 104
 105 static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
 106 {
 107         u32 reg, cnt;
 108         u8 byte;
 109
 110         /* See how much data is available */
 111         reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
 112         reg &= SUN6I_FIFO_STA_RF_CNT_MASK;
 113         cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS;
 114
 115         if (len > cnt)
 116                 len = cnt;
 117
 118         while (len--) {
 119                 byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
 120                 if (sspi->rx_buf)
 121                         *sspi->rx_buf++ = byte;
 122         }
 123 }
 124
 125 static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
 126 {
 127         u8 byte;
 128
 129         if (len > sspi->len)
 130                 len = sspi->len;
 131
 132         while (len--) {
 133                 byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
 134                 writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG);
 135                 sspi->len--;
 136         }
 137 }
 138
 139 static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
 140 {
 141         struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
 142         u32 reg;
 143
 144         reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 145         reg &= ~SUN6I_TFR_CTL_CS_MASK;
 146         reg |= SUN6I_TFR_CTL_CS(spi->chip_select);
 147
 148         if (enable)
 149                 reg |= SUN6I_TFR_CTL_CS_LEVEL;
 150         else
 151                 reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
 152
 153         sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
 154 }
 155
 156
 157 static int sun6i_spi_transfer_one(struct spi_master *master,
 158                                   struct spi_device *spi,
 159                                   struct spi_transfer *tfr)
 160 {
 161         struct sun6i_spi *sspi = spi_master_get_devdata(master);
 162         unsigned int mclk_rate, div, timeout;
 163         unsigned int tx_len = 0;
 164         int ret = 0;
 165         u32 reg;
 166
 167         /* We don't support transfer larger than the FIFO */
 168         if (tfr->len > SUN6I_FIFO_DEPTH)
 169                 return -EINVAL;
 170
 171         reinit_completion(&sspi->done);
 172         sspi->tx_buf = tfr->tx_buf;
 173         sspi->rx_buf = tfr->rx_buf;
 174         sspi->len = tfr->len;
 175
 176         /* Clear pending interrupts */
 177         sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0);
 178
 179         /* Reset FIFO */
 180         sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
 181                         SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);
 182
 183         /*
 184          * Setup the transfer control register: Chip Select,
 185          * polarities, etc.
 186          */
 187         reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 188
 189         if (spi->mode & SPI_CPOL)
 190                 reg |= SUN6I_TFR_CTL_CPOL;
 191         else
 192                 reg &= ~SUN6I_TFR_CTL_CPOL;
 193
 194         if (spi->mode & SPI_CPHA)
 195                 reg |= SUN6I_TFR_CTL_CPHA;
 196         else
 197                 reg &= ~SUN6I_TFR_CTL_CPHA;
 198
 199         if (spi->mode & SPI_LSB_FIRST)
 200                 reg |= SUN6I_TFR_CTL_FBS;
 201         else
 202                 reg &= ~SUN6I_TFR_CTL_FBS;
 203
 204         /*
 205          * If it's a TX only transfer, we don't want to fill the RX
 206          * FIFO with bogus data
 207          */
 208         if (sspi->rx_buf)
 209                 reg &= ~SUN6I_TFR_CTL_DHB;
 210         else
 211                 reg |= SUN6I_TFR_CTL_DHB;
 212
 213         /* We want to control the chip select manually */
 214         reg |= SUN6I_TFR_CTL_CS_MANUAL;
 215
 216         sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
 217
 218         /* Ensure that we have a parent clock fast enough */
 219         mclk_rate = clk_get_rate(sspi->mclk);
 220         if (mclk_rate < (2 * spi->max_speed_hz)) {
 221                 clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
 222                 mclk_rate = clk_get_rate(sspi->mclk);
 223         }
 224
 225         /*
 226          * Setup clock divider.
 227          *
 228          * We have two choices there. Either we can use the clock
 229          * divide rate 1, which is calculated thanks to this formula:
 230          * SPI_CLK = MOD_CLK / (2 ^ cdr)
 231          * Or we can use CDR2, which is calculated with the formula:
 232          * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
 233          * Wether we use the former or the latter is set through the
 234          * DRS bit.
 235          *
 236          * First try CDR2, and if we can't reach the expected
 237          * frequency, fall back to CDR1.
 238          */
 239         div = mclk_rate / (2 * spi->max_speed_hz);
 240         if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
 241                 if (div > 0)
 242                         div--;
 243
 244                 reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
 245         } else {
 246                 div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
 247                 reg = SUN6I_CLK_CTL_CDR1(div);
 248         }
 249
 250         sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
 251
 252         /* Setup the transfer now... */
 253         if (sspi->tx_buf)
 254                 tx_len = tfr->len;
 255
 256         /* Setup the counters */
 257         sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len));
 258         sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len));
 259         sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
 260                         SUN6I_BURST_CTL_CNT_STC(tx_len));
 261
 262         /* Fill the TX FIFO */
 263         sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH);
 264
 265         /* Enable the interrupts */
 266         sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
 267
 268         /* Start the transfer */
 269         reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 270         sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
 271
 272         timeout = wait_for_completion_timeout(&sspi->done,
 273                                               msecs_to_jiffies(1000));
 274         if (!timeout) {
 275                 ret = -ETIMEDOUT;
 276                 goto out;
 277         }
 278
 279         sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
 280
 281 out:
 282         sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
 283
 284         return ret;
 285 }
 286
 287 static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
 288 {
 289         struct sun6i_spi *sspi = dev_id;
 290         u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG);
 291
 292         /* Transfer complete */
 293         if (status & SUN6I_INT_CTL_TC) {
 294                 sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
 295                 complete(&sspi->done);
 296                 return IRQ_HANDLED;
 297         }
 298
 299         return IRQ_NONE;
 300 }
 301
 302 static int sun6i_spi_runtime_resume(struct device *dev)
 303 {
 304         struct spi_master *master = dev_get_drvdata(dev);
 305         struct sun6i_spi *sspi = spi_master_get_devdata(master);
 306         int ret;
 307
 308         ret = clk_prepare_enable(sspi->hclk);
 309         if (ret) {
 310                 dev_err(dev, "Couldn't enable AHB clock\n");
 311                 goto out;
 312         }
 313
 314         ret = clk_prepare_enable(sspi->mclk);
 315         if (ret) {
 316                 dev_err(dev, "Couldn't enable module clock\n");
 317                 goto err;
 318         }
 319
 320         ret = reset_control_deassert(sspi->rstc);
 321         if (ret) {
 322                 dev_err(dev, "Couldn't deassert the device from reset\n");
 323                 goto err2;
 324         }
 325
 326         sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
 327                         SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
 328
 329         return 0;
 330
 331 err2:
 332         clk_disable_unprepare(sspi->mclk);
 333 err:
 334         clk_disable_unprepare(sspi->hclk);
 335 out:
 336         return ret;
 337 }
 338
 339 static int sun6i_spi_runtime_suspend(struct device *dev)
 340 {
 341         struct spi_master *master = dev_get_drvdata(dev);
 342         struct sun6i_spi *sspi = spi_master_get_devdata(master);
 343
 344         reset_control_assert(sspi->rstc);
 345         clk_disable_unprepare(sspi->mclk);
 346         clk_disable_unprepare(sspi->hclk);
 347
 348         return 0;
 349 }
 350
 351 static int sun6i_spi_probe(struct platform_device *pdev)
 352 {
 353         struct spi_master *master;
 354         struct sun6i_spi *sspi;
 355         struct resource *res;
 356         int ret = 0, irq;
 357
 358         master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
 359         if (!master) {
 360                 dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
 361                 return -ENOMEM;
 362         }
 363
 364         platform_set_drvdata(pdev, master);
 365         sspi = spi_master_get_devdata(master);
 366
 367         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 368         sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
 369         if (IS_ERR(sspi->base_addr)) {
 370                 ret = PTR_ERR(sspi->base_addr);
 371                 goto err_free_master;
 372         }
 373
 374         irq = platform_get_irq(pdev, 0);
 375         if (irq < 0) {
 376                 dev_err(&pdev->dev, "No spi IRQ specified\n");
 377                 ret = -ENXIO;
 378                 goto err_free_master;
 379         }
 380
 381         ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler,
 382                                0, "sun6i-spi", sspi);
 383         if (ret) {
 384                 dev_err(&pdev->dev, "Cannot request IRQ\n");
 385                 goto err_free_master;
 386         }
 387
 388         sspi->master = master;
 389         master->set_cs = sun6i_spi_set_cs;
 390         master->transfer_one = sun6i_spi_transfer_one;
 391         master->num_chipselect = 4;
 392         master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
 393         master->bits_per_word_mask = SPI_BPW_MASK(8);
 394         master->dev.of_node = pdev->dev.of_node;
 395         master->auto_runtime_pm = true;
 396
 397         sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
 398         if (IS_ERR(sspi->hclk)) {
 399                 dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
 400                 ret = PTR_ERR(sspi->hclk);
 401                 goto err_free_master;
 402         }
 403
 404         sspi->mclk = devm_clk_get(&pdev->dev, "mod");
 405         if (IS_ERR(sspi->mclk)) {
 406                 dev_err(&pdev->dev, "Unable to acquire module clock\n");
 407                 ret = PTR_ERR(sspi->mclk);
 408                 goto err_free_master;
 409         }
 410
 411         init_completion(&sspi->done);
 412
 413         sspi->rstc = devm_reset_control_get(&pdev->dev, NULL);
 414         if (IS_ERR(sspi->rstc)) {
 415                 dev_err(&pdev->dev, "Couldn't get reset controller\n");
 416                 ret = PTR_ERR(sspi->rstc);
 417                 goto err_free_master;
 418         }
 419
 420         /*
 421          * This wake-up/shutdown pattern is to be able to have the
 422          * device woken up, even if runtime_pm is disabled
 423          */
 424         ret = sun6i_spi_runtime_resume(&pdev->dev);
 425         if (ret) {
 426                 dev_err(&pdev->dev, "Couldn't resume the device\n");
 427                 goto err_free_master;
 428         }
 429
 430         pm_runtime_set_active(&pdev->dev);
 431         pm_runtime_enable(&pdev->dev);
 432         pm_runtime_idle(&pdev->dev);
 433
 434         ret = devm_spi_register_master(&pdev->dev, master);
 435         if (ret) {
 436                 dev_err(&pdev->dev, "cannot register SPI master\n");
 437                 goto err_pm_disable;
 438         }
 439
 440         return 0;
 441
 442 err_pm_disable:
 443         pm_runtime_disable(&pdev->dev);
 444         sun6i_spi_runtime_suspend(&pdev->dev);
 445 err_free_master:
 446         spi_master_put(master);
 447         return ret;
 448 }
 449
 450 static int sun6i_spi_remove(struct platform_device *pdev)
 451 {
 452         pm_runtime_disable(&pdev->dev);
 453
 454         return 0;
 455 }
 456
 457 static const struct of_device_id sun6i_spi_match[] = {
 458         { .compatible = "allwinner,sun6i-a31-spi", },
 459         {}
 460 };
 461 MODULE_DEVICE_TABLE(of, sun6i_spi_match);
 462
 463 static const struct dev_pm_ops sun6i_spi_pm_ops = {
 464         .runtime_resume         = sun6i_spi_runtime_resume,
 465         .runtime_suspend        = sun6i_spi_runtime_suspend,
 466 };
 467
 468 static struct platform_driver sun6i_spi_driver = {
 469         .probe  = sun6i_spi_probe,
 470         .remove = sun6i_spi_remove,
 471         .driver = {
 472                 .name           = "sun6i-spi",
 473                 .owner          = THIS_MODULE,
 474                 .of_match_table = sun6i_spi_match,
 475                 .pm             = &sun6i_spi_pm_ops,
 476         },
 477 };
 478 module_platform_driver(sun6i_spi_driver);
 479
 480 MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
 481 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
 482 MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
 483 MODULE_LICENSE("GPL");