drivers/scsi/scsi_transport_sas.c

   1 /*
   2  * Copyright (C) 2005-2006 Dell Inc.
   3  *      Released under GPL v2.
   4  *
   5  * Serial Attached SCSI (SAS) transport class.
   6  *
   7  * The SAS transport class contains common code to deal with SAS HBAs,
   8  * an aproximated representation of SAS topologies in the driver model,
   9  * and various sysfs attributes to expose these topologies and managment
  10  * interfaces to userspace.
  11  *
  12  * In addition to the basic SCSI core objects this transport class
  13  * introduces two additional intermediate objects:  The SAS PHY
  14  * as represented by struct sas_phy defines an "outgoing" PHY on
  15  * a SAS HBA or Expander, and the SAS remote PHY represented by
  16  * struct sas_rphy defines an "incoming" PHY on a SAS Expander or
  17  * end device.  Note that this is purely a software concept, the
  18  * underlying hardware for a PHY and a remote PHY is the exactly
  19  * the same.
  20  *
  21  * There is no concept of a SAS port in this code, users can see
  22  * what PHYs form a wide port based on the port_identifier attribute,
  23  * which is the same for all PHYs in a port.
  24  */
  25
  26 #include <linux/init.h>
  27 #include <linux/module.h>
  28 #include <linux/err.h>
  29 #include <linux/slab.h>
  30 #include <linux/string.h>
  31
  32 #include <scsi/scsi.h>
  33 #include <scsi/scsi_device.h>
  34 #include <scsi/scsi_host.h>
  35 #include <scsi/scsi_transport.h>
  36 #include <scsi/scsi_transport_sas.h>
  37
  38 #include "scsi_sas_internal.h"
  39 struct sas_host_attrs {
  40         struct list_head rphy_list;
  41         struct mutex lock;
  42         u32 next_target_id;
  43         u32 next_expander_id;
  44 };
  45 #define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data)
  46
  47
  48 /*
  49  * Hack to allow attributes of the same name in different objects.
  50  */
  51 #define SAS_CLASS_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \
  52         struct class_device_attribute class_device_attr_##_prefix##_##_name = \
  53         __ATTR(_name,_mode,_show,_store)
  54
  55
  56 /*
  57  * Pretty printing helpers
  58  */
  59
  60 #define sas_bitfield_name_match(title, table)                   \
  61 static ssize_t                                                  \
  62 get_sas_##title##_names(u32 table_key, char *buf)               \
  63 {                                                               \
  64         char *prefix = "";                                      \
  65         ssize_t len = 0;                                        \
  66         int i;                                                  \
  67                                                                 \
  68         for (i = 0; i < ARRAY_SIZE(table); i++) {               \
  69                 if (table[i].value & table_key) {               \
  70                         len += sprintf(buf + len, "%s%s",       \
  71                                 prefix, table[i].name);         \
  72                         prefix = ", ";                          \
  73                 }                                               \
  74         }                                                       \
  75         len += sprintf(buf + len, "\n");                        \
  76         return len;                                             \
  77 }
  78
  79 #define sas_bitfield_name_search(title, table)                  \
  80 static ssize_t                                                  \
  81 get_sas_##title##_names(u32 table_key, char *buf)               \
  82 {                                                               \
  83         ssize_t len = 0;                                        \
  84         int i;                                                  \
  85                                                                 \
  86         for (i = 0; i < ARRAY_SIZE(table); i++) {               \
  87                 if (table[i].value == table_key) {              \
  88                         len += sprintf(buf + len, "%s",         \
  89                                 table[i].name);                 \
  90                         break;                                  \
  91                 }                                               \
  92         }                                                       \
  93         len += sprintf(buf + len, "\n");                        \
  94         return len;                                             \
  95 }
  96
  97 static struct {
  98         u32             value;
  99         char            *name;
 100 } sas_device_type_names[] = {
 101         { SAS_PHY_UNUSED,               "unused" },
 102         { SAS_END_DEVICE,               "end device" },
 103         { SAS_EDGE_EXPANDER_DEVICE,     "edge expander" },
 104         { SAS_FANOUT_EXPANDER_DEVICE,   "fanout expander" },
 105 };
 106 sas_bitfield_name_search(device_type, sas_device_type_names)
 107
 108
 109 static struct {
 110         u32             value;
 111         char            *name;
 112 } sas_protocol_names[] = {
 113         { SAS_PROTOCOL_SATA,            "sata" },
 114         { SAS_PROTOCOL_SMP,             "smp" },
 115         { SAS_PROTOCOL_STP,             "stp" },
 116         { SAS_PROTOCOL_SSP,             "ssp" },
 117 };
 118 sas_bitfield_name_match(protocol, sas_protocol_names)
 119
 120 static struct {
 121         u32             value;
 122         char            *name;
 123 } sas_linkspeed_names[] = {
 124         { SAS_LINK_RATE_UNKNOWN,        "Unknown" },
 125         { SAS_PHY_DISABLED,             "Phy disabled" },
 126         { SAS_LINK_RATE_FAILED,         "Link Rate failed" },
 127         { SAS_SATA_SPINUP_HOLD,         "Spin-up hold" },
 128         { SAS_LINK_RATE_1_5_GBPS,       "1.5 Gbit" },
 129         { SAS_LINK_RATE_3_0_GBPS,       "3.0 Gbit" },
 130         { SAS_LINK_RATE_6_0_GBPS,       "6.0 Gbit" },
 131 };
 132 sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
 133
 134
 135 /*
 136  * SAS host attributes
 137  */
 138
 139 static int sas_host_setup(struct transport_container *tc, struct device *dev,
 140                           struct class_device *cdev)
 141 {
 142         struct Scsi_Host *shost = dev_to_shost(dev);
 143         struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 144
 145         INIT_LIST_HEAD(&sas_host->rphy_list);
 146         mutex_init(&sas_host->lock);
 147         sas_host->next_target_id = 0;
 148         sas_host->next_expander_id = 0;
 149         return 0;
 150 }
 151
 152 static DECLARE_TRANSPORT_CLASS(sas_host_class,
 153                 "sas_host", sas_host_setup, NULL, NULL);
 154
 155 static int sas_host_match(struct attribute_container *cont,
 156                             struct device *dev)
 157 {
 158         struct Scsi_Host *shost;
 159         struct sas_internal *i;
 160
 161         if (!scsi_is_host_device(dev))
 162                 return 0;
 163         shost = dev_to_shost(dev);
 164
 165         if (!shost->transportt)
 166                 return 0;
 167         if (shost->transportt->host_attrs.ac.class !=
 168                         &sas_host_class.class)
 169                 return 0;
 170
 171         i = to_sas_internal(shost->transportt);
 172         return &i->t.host_attrs.ac == cont;
 173 }
 174
 175 static int do_sas_phy_delete(struct device *dev, void *data)
 176 {
 177         if (scsi_is_sas_phy(dev))
 178                 sas_phy_delete(dev_to_phy(dev));
 179         return 0;
 180 }
 181
 182 /**
 183  * sas_remove_host  --  tear down a Scsi_Host's SAS data structures
 184  * @shost:      Scsi Host that is torn down
 185  *
 186  * Removes all SAS PHYs and remote PHYs for a given Scsi_Host.
 187  * Must be called just before scsi_remove_host for SAS HBAs.
 188  */
 189 void sas_remove_host(struct Scsi_Host *shost)
 190 {
 191         device_for_each_child(&shost->shost_gendev, NULL, do_sas_phy_delete);
 192 }
 193 EXPORT_SYMBOL(sas_remove_host);
 194
 195
 196 /*
 197  * SAS Port attributes
 198  */
 199
 200 #define sas_phy_show_simple(field, name, format_string, cast)           \
 201 static ssize_t                                                          \
 202 show_sas_phy_##name(struct class_device *cdev, char *buf)               \
 203 {                                                                       \
 204         struct sas_phy *phy = transport_class_to_phy(cdev);             \
 205                                                                         \
 206         return snprintf(buf, 20, format_string, cast phy->field);       \
 207 }
 208
 209 #define sas_phy_simple_attr(field, name, format_string, type)           \
 210         sas_phy_show_simple(field, name, format_string, (type)) \
 211 static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
 212
 213 #define sas_phy_show_protocol(field, name)                              \
 214 static ssize_t                                                          \
 215 show_sas_phy_##name(struct class_device *cdev, char *buf)               \
 216 {                                                                       \
 217         struct sas_phy *phy = transport_class_to_phy(cdev);             \
 218                                                                         \
 219         if (!phy->field)                                                \
 220                 return snprintf(buf, 20, "none\n");                     \
 221         return get_sas_protocol_names(phy->field, buf);         \
 222 }
 223
 224 #define sas_phy_protocol_attr(field, name)                              \
 225         sas_phy_show_protocol(field, name)                              \
 226 static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
 227
 228 #define sas_phy_show_linkspeed(field)                                   \
 229 static ssize_t                                                          \
 230 show_sas_phy_##field(struct class_device *cdev, char *buf)              \
 231 {                                                                       \
 232         struct sas_phy *phy = transport_class_to_phy(cdev);             \
 233                                                                         \
 234         return get_sas_linkspeed_names(phy->field, buf);                \
 235 }
 236
 237 #define sas_phy_linkspeed_attr(field)                                   \
 238         sas_phy_show_linkspeed(field)                                   \
 239 static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
 240
 241 #define sas_phy_show_linkerror(field)                                   \
 242 static ssize_t                                                          \
 243 show_sas_phy_##field(struct class_device *cdev, char *buf)              \
 244 {                                                                       \
 245         struct sas_phy *phy = transport_class_to_phy(cdev);             \
 246         struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);        \
 247         struct sas_internal *i = to_sas_internal(shost->transportt);    \
 248         int error;                                                      \
 249                                                                         \
 250         if (!phy->local_attached)                                       \
 251                 return -EINVAL;                                         \
 252                                                                         \
 253         error = i->f->get_linkerrors ? i->f->get_linkerrors(phy) : 0;   \
 254         if (error)                                                      \
 255                 return error;                                           \
 256         return snprintf(buf, 20, "%u\n", phy->field);                   \
 257 }
 258
 259 #define sas_phy_linkerror_attr(field)                                   \
 260         sas_phy_show_linkerror(field)                                   \
 261 static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
 262
 263
 264 static ssize_t
 265 show_sas_device_type(struct class_device *cdev, char *buf)
 266 {
 267         struct sas_phy *phy = transport_class_to_phy(cdev);
 268
 269         if (!phy->identify.device_type)
 270                 return snprintf(buf, 20, "none\n");
 271         return get_sas_device_type_names(phy->identify.device_type, buf);
 272 }
 273 static CLASS_DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL);
 274
 275 static ssize_t do_sas_phy_reset(struct class_device *cdev,
 276                 size_t count, int hard_reset)
 277 {
 278         struct sas_phy *phy = transport_class_to_phy(cdev);
 279         struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
 280         struct sas_internal *i = to_sas_internal(shost->transportt);
 281         int error;
 282
 283         if (!phy->local_attached)
 284                 return -EINVAL;
 285
 286         error = i->f->phy_reset(phy, hard_reset);
 287         if (error)
 288                 return error;
 289         return count;
 290 };
 291
 292 static ssize_t store_sas_link_reset(struct class_device *cdev,
 293                 const char *buf, size_t count)
 294 {
 295         return do_sas_phy_reset(cdev, count, 0);
 296 }
 297 static CLASS_DEVICE_ATTR(link_reset, S_IWUSR, NULL, store_sas_link_reset);
 298
 299 static ssize_t store_sas_hard_reset(struct class_device *cdev,
 300                 const char *buf, size_t count)
 301 {
 302         return do_sas_phy_reset(cdev, count, 1);
 303 }
 304 static CLASS_DEVICE_ATTR(hard_reset, S_IWUSR, NULL, store_sas_hard_reset);
 305
 306 sas_phy_protocol_attr(identify.initiator_port_protocols,
 307                 initiator_port_protocols);
 308 sas_phy_protocol_attr(identify.target_port_protocols,
 309                 target_port_protocols);
 310 sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
 311                 unsigned long long);
 312 sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
 313 sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8);
 314 sas_phy_linkspeed_attr(negotiated_linkrate);
 315 sas_phy_linkspeed_attr(minimum_linkrate_hw);
 316 sas_phy_linkspeed_attr(minimum_linkrate);
 317 sas_phy_linkspeed_attr(maximum_linkrate_hw);
 318 sas_phy_linkspeed_attr(maximum_linkrate);
 319 sas_phy_linkerror_attr(invalid_dword_count);
 320 sas_phy_linkerror_attr(running_disparity_error_count);
 321 sas_phy_linkerror_attr(loss_of_dword_sync_count);
 322 sas_phy_linkerror_attr(phy_reset_problem_count);
 323
 324
 325 static DECLARE_TRANSPORT_CLASS(sas_phy_class,
 326                 "sas_phy", NULL, NULL, NULL);
 327
 328 static int sas_phy_match(struct attribute_container *cont, struct device *dev)
 329 {
 330         struct Scsi_Host *shost;
 331         struct sas_internal *i;
 332
 333         if (!scsi_is_sas_phy(dev))
 334                 return 0;
 335         shost = dev_to_shost(dev->parent);
 336
 337         if (!shost->transportt)
 338                 return 0;
 339         if (shost->transportt->host_attrs.ac.class !=
 340                         &sas_host_class.class)
 341                 return 0;
 342
 343         i = to_sas_internal(shost->transportt);
 344         return &i->phy_attr_cont.ac == cont;
 345 }
 346
 347 static void sas_phy_release(struct device *dev)
 348 {
 349         struct sas_phy *phy = dev_to_phy(dev);
 350
 351         put_device(dev->parent);
 352         kfree(phy);
 353 }
 354
 355 /**
 356  * sas_phy_alloc  --  allocates and initialize a SAS PHY structure
 357  * @parent:     Parent device
 358  * @number:     Phy index
 359  *
 360  * Allocates an SAS PHY structure.  It will be added in the device tree
 361  * below the device specified by @parent, which has to be either a Scsi_Host
 362  * or sas_rphy.
 363  *
 364  * Returns:
 365  *      SAS PHY allocated or %NULL if the allocation failed.
 366  */
 367 struct sas_phy *sas_phy_alloc(struct device *parent, int number)
 368 {
 369         struct Scsi_Host *shost = dev_to_shost(parent);
 370         struct sas_phy *phy;
 371
 372         phy = kzalloc(sizeof(*phy), GFP_KERNEL);
 373         if (!phy)
 374                 return NULL;
 375
 376         phy->number = number;
 377
 378         device_initialize(&phy->dev);
 379         phy->dev.parent = get_device(parent);
 380         phy->dev.release = sas_phy_release;
 381         if (scsi_is_sas_expander_device(parent)) {
 382                 struct sas_rphy *rphy = dev_to_rphy(parent);
 383                 sprintf(phy->dev.bus_id, "phy-%d-%d:%d", shost->host_no,
 384                         rphy->scsi_target_id, number);
 385         } else
 386                 sprintf(phy->dev.bus_id, "phy-%d:%d", shost->host_no, number);
 387
 388         transport_setup_device(&phy->dev);
 389
 390         return phy;
 391 }
 392 EXPORT_SYMBOL(sas_phy_alloc);
 393
 394 /**
 395  * sas_phy_add  --  add a SAS PHY to the device hierachy
 396  * @phy:        The PHY to be added
 397  *
 398  * Publishes a SAS PHY to the rest of the system.
 399  */
 400 int sas_phy_add(struct sas_phy *phy)
 401 {
 402         int error;
 403
 404         error = device_add(&phy->dev);
 405         if (!error) {
 406                 transport_add_device(&phy->dev);
 407                 transport_configure_device(&phy->dev);
 408         }
 409
 410         return error;
 411 }
 412 EXPORT_SYMBOL(sas_phy_add);
 413
 414 /**
 415  * sas_phy_free  --  free a SAS PHY
 416  * @phy:        SAS PHY to free
 417  *
 418  * Frees the specified SAS PHY.
 419  *
 420  * Note:
 421  *   This function must only be called on a PHY that has not
 422  *   sucessfully been added using sas_phy_add().
 423  */
 424 void sas_phy_free(struct sas_phy *phy)
 425 {
 426         transport_destroy_device(&phy->dev);
 427         put_device(&phy->dev);
 428 }
 429 EXPORT_SYMBOL(sas_phy_free);
 430
 431 /**
 432  * sas_phy_delete  --  remove SAS PHY
 433  * @phy:        SAS PHY to remove
 434  *
 435  * Removes the specified SAS PHY.  If the SAS PHY has an
 436  * associated remote PHY it is removed before.
 437  */
 438 void
 439 sas_phy_delete(struct sas_phy *phy)
 440 {
 441         struct device *dev = &phy->dev;
 442
 443         if (phy->rphy)
 444                 sas_rphy_delete(phy->rphy);
 445
 446         transport_remove_device(dev);
 447         device_del(dev);
 448         transport_destroy_device(dev);
 449         put_device(dev);
 450 }
 451 EXPORT_SYMBOL(sas_phy_delete);
 452
 453 /**
 454  * scsi_is_sas_phy  --  check if a struct device represents a SAS PHY
 455  * @dev:        device to check
 456  *
 457  * Returns:
 458  *      %1 if the device represents a SAS PHY, %0 else
 459  */
 460 int scsi_is_sas_phy(const struct device *dev)
 461 {
 462         return dev->release == sas_phy_release;
 463 }
 464 EXPORT_SYMBOL(scsi_is_sas_phy);
 465
 466 /*
 467  * SAS remote PHY attributes.
 468  */
 469
 470 #define sas_rphy_show_simple(field, name, format_string, cast)          \
 471 static ssize_t                                                          \
 472 show_sas_rphy_##name(struct class_device *cdev, char *buf)              \
 473 {                                                                       \
 474         struct sas_rphy *rphy = transport_class_to_rphy(cdev);  \
 475                                                                         \
 476         return snprintf(buf, 20, format_string, cast rphy->field);      \
 477 }
 478
 479 #define sas_rphy_simple_attr(field, name, format_string, type)          \
 480         sas_rphy_show_simple(field, name, format_string, (type))        \
 481 static SAS_CLASS_DEVICE_ATTR(rphy, name, S_IRUGO,                       \
 482                 show_sas_rphy_##name, NULL)
 483
 484 #define sas_rphy_show_protocol(field, name)                             \
 485 static ssize_t                                                          \
 486 show_sas_rphy_##name(struct class_device *cdev, char *buf)              \
 487 {                                                                       \
 488         struct sas_rphy *rphy = transport_class_to_rphy(cdev);  \
 489                                                                         \
 490         if (!rphy->field)                                       \
 491                 return snprintf(buf, 20, "none\n");                     \
 492         return get_sas_protocol_names(rphy->field, buf);        \
 493 }
 494
 495 #define sas_rphy_protocol_attr(field, name)                             \
 496         sas_rphy_show_protocol(field, name)                             \
 497 static SAS_CLASS_DEVICE_ATTR(rphy, name, S_IRUGO,                       \
 498                 show_sas_rphy_##name, NULL)
 499
 500 static ssize_t
 501 show_sas_rphy_device_type(struct class_device *cdev, char *buf)
 502 {
 503         struct sas_rphy *rphy = transport_class_to_rphy(cdev);
 504
 505         if (!rphy->identify.device_type)
 506                 return snprintf(buf, 20, "none\n");
 507         return get_sas_device_type_names(
 508                         rphy->identify.device_type, buf);
 509 }
 510
 511 static SAS_CLASS_DEVICE_ATTR(rphy, device_type, S_IRUGO,
 512                 show_sas_rphy_device_type, NULL);
 513
 514 static ssize_t
 515 show_sas_rphy_enclosure_identifier(struct class_device *cdev, char *buf)
 516 {
 517         struct sas_rphy *rphy = transport_class_to_rphy(cdev);
 518         struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
 519         struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
 520         struct sas_internal *i = to_sas_internal(shost->transportt);
 521         u64 identifier;
 522         int error;
 523
 524         /*
 525          * Only devices behind an expander are supported, because the
 526          * enclosure identifier is a SMP feature.
 527          */
 528         if (phy->local_attached)
 529                 return -EINVAL;
 530
 531         error = i->f->get_enclosure_identifier(rphy, &identifier);
 532         if (error)
 533                 return error;
 534         return sprintf(buf, "0x%llx\n", (unsigned long long)identifier);
 535 }
 536
 537 static SAS_CLASS_DEVICE_ATTR(rphy, enclosure_identifier, S_IRUGO,
 538                 show_sas_rphy_enclosure_identifier, NULL);
 539
 540 static ssize_t
 541 show_sas_rphy_bay_identifier(struct class_device *cdev, char *buf)
 542 {
 543         struct sas_rphy *rphy = transport_class_to_rphy(cdev);
 544         struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
 545         struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
 546         struct sas_internal *i = to_sas_internal(shost->transportt);
 547         int val;
 548
 549         if (phy->local_attached)
 550                 return -EINVAL;
 551
 552         val = i->f->get_bay_identifier(rphy);
 553         if (val < 0)
 554                 return val;
 555         return sprintf(buf, "%d\n", val);
 556 }
 557
 558 static SAS_CLASS_DEVICE_ATTR(rphy, bay_identifier, S_IRUGO,
 559                 show_sas_rphy_bay_identifier, NULL);
 560
 561 sas_rphy_protocol_attr(identify.initiator_port_protocols,
 562                 initiator_port_protocols);
 563 sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols);
 564 sas_rphy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
 565                 unsigned long long);
 566 sas_rphy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
 567
 568 /* only need 8 bytes of data plus header (4 or 8) */
 569 #define BUF_SIZE 64
 570
 571 int sas_read_port_mode_page(struct scsi_device *sdev)
 572 {
 573         char *buffer = kzalloc(BUF_SIZE, GFP_KERNEL), *msdata;
 574         struct sas_rphy *rphy = target_to_rphy(sdev->sdev_target);
 575         struct sas_end_device *rdev;
 576         struct scsi_mode_data mode_data;
 577         int res, error;
 578
 579         BUG_ON(rphy->identify.device_type != SAS_END_DEVICE);
 580
 581         rdev = rphy_to_end_device(rphy);
 582
 583         if (!buffer)
 584                 return -ENOMEM;
 585
 586         res = scsi_mode_sense(sdev, 1, 0x19, buffer, BUF_SIZE, 30*HZ, 3,
 587                               &mode_data, NULL);
 588
 589         error = -EINVAL;
 590         if (!scsi_status_is_good(res))
 591                 goto out;
 592
 593         msdata = buffer +  mode_data.header_length +
 594                 mode_data.block_descriptor_length;
 595
 596         if (msdata - buffer > BUF_SIZE - 8)
 597                 goto out;
 598
 599         error = 0;
 600
 601         rdev->ready_led_meaning = msdata[2] & 0x10 ? 1 : 0;
 602         rdev->I_T_nexus_loss_timeout = (msdata[4] << 8) + msdata[5];
 603         rdev->initiator_response_timeout = (msdata[6] << 8) + msdata[7];
 604
 605  out:
 606         kfree(buffer);
 607         return error;
 608 }
 609 EXPORT_SYMBOL(sas_read_port_mode_page);
 610
 611 static DECLARE_TRANSPORT_CLASS(sas_end_dev_class,
 612                                "sas_end_device", NULL, NULL, NULL);
 613
 614 #define sas_end_dev_show_simple(field, name, format_string, cast)       \
 615 static ssize_t                                                          \
 616 show_sas_end_dev_##name(struct class_device *cdev, char *buf)           \
 617 {                                                                       \
 618         struct sas_rphy *rphy = transport_class_to_rphy(cdev);          \
 619         struct sas_end_device *rdev = rphy_to_end_device(rphy);         \
 620                                                                         \
 621         return snprintf(buf, 20, format_string, cast rdev->field);      \
 622 }
 623
 624 #define sas_end_dev_simple_attr(field, name, format_string, type)       \
 625         sas_end_dev_show_simple(field, name, format_string, (type))     \
 626 static SAS_CLASS_DEVICE_ATTR(end_dev, name, S_IRUGO,                    \
 627                 show_sas_end_dev_##name, NULL)
 628
 629 sas_end_dev_simple_attr(ready_led_meaning, ready_led_meaning, "%d\n", int);
 630 sas_end_dev_simple_attr(I_T_nexus_loss_timeout, I_T_nexus_loss_timeout,
 631                         "%d\n", int);
 632 sas_end_dev_simple_attr(initiator_response_timeout, initiator_response_timeout,
 633                         "%d\n", int);
 634
 635 static DECLARE_TRANSPORT_CLASS(sas_expander_class,
 636                                "sas_expander", NULL, NULL, NULL);
 637
 638 #define sas_expander_show_simple(field, name, format_string, cast)      \
 639 static ssize_t                                                          \
 640 show_sas_expander_##name(struct class_device *cdev, char *buf)          \
 641 {                                                                       \
 642         struct sas_rphy *rphy = transport_class_to_rphy(cdev);          \
 643         struct sas_expander_device *edev = rphy_to_expander_device(rphy); \
 644                                                                         \
 645         return snprintf(buf, 20, format_string, cast edev->field);      \
 646 }
 647
 648 #define sas_expander_simple_attr(field, name, format_string, type)      \
 649         sas_expander_show_simple(field, name, format_string, (type))    \
 650 static SAS_CLASS_DEVICE_ATTR(expander, name, S_IRUGO,                   \
 651                 show_sas_expander_##name, NULL)
 652
 653 sas_expander_simple_attr(vendor_id, vendor_id, "%s\n", char *);
 654 sas_expander_simple_attr(product_id, product_id, "%s\n", char *);
 655 sas_expander_simple_attr(product_rev, product_rev, "%s\n", char *);
 656 sas_expander_simple_attr(component_vendor_id, component_vendor_id,
 657                          "%s\n", char *);
 658 sas_expander_simple_attr(component_id, component_id, "%u\n", unsigned int);
 659 sas_expander_simple_attr(component_revision_id, component_revision_id, "%u\n",
 660                          unsigned int);
 661 sas_expander_simple_attr(level, level, "%d\n", int);
 662
 663 static DECLARE_TRANSPORT_CLASS(sas_rphy_class,
 664                 "sas_device", NULL, NULL, NULL);
 665
 666 static int sas_rphy_match(struct attribute_container *cont, struct device *dev)
 667 {
 668         struct Scsi_Host *shost;
 669         struct sas_internal *i;
 670
 671         if (!scsi_is_sas_rphy(dev))
 672                 return 0;
 673         shost = dev_to_shost(dev->parent->parent);
 674
 675         if (!shost->transportt)
 676                 return 0;
 677         if (shost->transportt->host_attrs.ac.class !=
 678                         &sas_host_class.class)
 679                 return 0;
 680
 681         i = to_sas_internal(shost->transportt);
 682         return &i->rphy_attr_cont.ac == cont;
 683 }
 684
 685 static int sas_end_dev_match(struct attribute_container *cont,
 686                              struct device *dev)
 687 {
 688         struct Scsi_Host *shost;
 689         struct sas_internal *i;
 690         struct sas_rphy *rphy;
 691
 692         if (!scsi_is_sas_rphy(dev))
 693                 return 0;
 694         shost = dev_to_shost(dev->parent->parent);
 695         rphy = dev_to_rphy(dev);
 696
 697         if (!shost->transportt)
 698                 return 0;
 699         if (shost->transportt->host_attrs.ac.class !=
 700                         &sas_host_class.class)
 701                 return 0;
 702
 703         i = to_sas_internal(shost->transportt);
 704         return &i->end_dev_attr_cont.ac == cont &&
 705                 rphy->identify.device_type == SAS_END_DEVICE;
 706 }
 707
 708 static int sas_expander_match(struct attribute_container *cont,
 709                               struct device *dev)
 710 {
 711         struct Scsi_Host *shost;
 712         struct sas_internal *i;
 713         struct sas_rphy *rphy;
 714
 715         if (!scsi_is_sas_rphy(dev))
 716                 return 0;
 717         shost = dev_to_shost(dev->parent->parent);
 718         rphy = dev_to_rphy(dev);
 719
 720         if (!shost->transportt)
 721                 return 0;
 722         if (shost->transportt->host_attrs.ac.class !=
 723                         &sas_host_class.class)
 724                 return 0;
 725
 726         i = to_sas_internal(shost->transportt);
 727         return &i->expander_attr_cont.ac == cont &&
 728                 (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE ||
 729                  rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE);
 730 }
 731
 732 static void sas_expander_release(struct device *dev)
 733 {
 734         struct sas_rphy *rphy = dev_to_rphy(dev);
 735         struct sas_expander_device *edev = rphy_to_expander_device(rphy);
 736
 737         put_device(dev->parent);
 738         kfree(edev);
 739 }
 740
 741 static void sas_end_device_release(struct device *dev)
 742 {
 743         struct sas_rphy *rphy = dev_to_rphy(dev);
 744         struct sas_end_device *edev = rphy_to_end_device(rphy);
 745
 746         put_device(dev->parent);
 747         kfree(edev);
 748 }
 749
 750 /**
 751  * sas_rphy_initialize - common rphy intialization
 752  * @rphy:       rphy to initialise
 753  *
 754  * Used by both sas_end_device_alloc() and sas_expander_alloc() to
 755  * initialise the common rphy component of each.
 756  */
 757 static void sas_rphy_initialize(struct sas_rphy *rphy)
 758 {
 759         INIT_LIST_HEAD(&rphy->list);
 760 }
 761
 762 /**
 763  * sas_end_device_alloc - allocate an rphy for an end device
 764  *
 765  * Allocates an SAS remote PHY structure, connected to @parent.
 766  *
 767  * Returns:
 768  *      SAS PHY allocated or %NULL if the allocation failed.
 769  */
 770 struct sas_rphy *sas_end_device_alloc(struct sas_phy *parent)
 771 {
 772         struct Scsi_Host *shost = dev_to_shost(&parent->dev);
 773         struct sas_end_device *rdev;
 774
 775         rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
 776         if (!rdev) {
 777                 return NULL;
 778         }
 779
 780         device_initialize(&rdev->rphy.dev);
 781         rdev->rphy.dev.parent = get_device(&parent->dev);
 782         rdev->rphy.dev.release = sas_end_device_release;
 783         sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d-%d",
 784                 shost->host_no, parent->port_identifier, parent->number);
 785         rdev->rphy.identify.device_type = SAS_END_DEVICE;
 786         sas_rphy_initialize(&rdev->rphy);
 787         transport_setup_device(&rdev->rphy.dev);
 788
 789         return &rdev->rphy;
 790 }
 791 EXPORT_SYMBOL(sas_end_device_alloc);
 792
 793 /**
 794  * sas_expander_alloc - allocate an rphy for an end device
 795  *
 796  * Allocates an SAS remote PHY structure, connected to @parent.
 797  *
 798  * Returns:
 799  *      SAS PHY allocated or %NULL if the allocation failed.
 800  */
 801 struct sas_rphy *sas_expander_alloc(struct sas_phy *parent,
 802                                     enum sas_device_type type)
 803 {
 804         struct Scsi_Host *shost = dev_to_shost(&parent->dev);
 805         struct sas_expander_device *rdev;
 806         struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 807
 808         BUG_ON(type != SAS_EDGE_EXPANDER_DEVICE &&
 809                type != SAS_FANOUT_EXPANDER_DEVICE);
 810
 811         rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
 812         if (!rdev) {
 813                 return NULL;
 814         }
 815
 816         device_initialize(&rdev->rphy.dev);
 817         rdev->rphy.dev.parent = get_device(&parent->dev);
 818         rdev->rphy.dev.release = sas_expander_release;
 819         mutex_lock(&sas_host->lock);
 820         rdev->rphy.scsi_target_id = sas_host->next_expander_id++;
 821         mutex_unlock(&sas_host->lock);
 822         sprintf(rdev->rphy.dev.bus_id, "expander-%d:%d",
 823                 shost->host_no, rdev->rphy.scsi_target_id);
 824         rdev->rphy.identify.device_type = type;
 825         sas_rphy_initialize(&rdev->rphy);
 826         transport_setup_device(&rdev->rphy.dev);
 827
 828         return &rdev->rphy;
 829 }
 830 EXPORT_SYMBOL(sas_expander_alloc);
 831
 832 /**
 833  * sas_rphy_add  --  add a SAS remote PHY to the device hierachy
 834  * @rphy:       The remote PHY to be added
 835  *
 836  * Publishes a SAS remote PHY to the rest of the system.
 837  */
 838 int sas_rphy_add(struct sas_rphy *rphy)
 839 {
 840         struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
 841         struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
 842         struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 843         struct sas_identify *identify = &rphy->identify;
 844         int error;
 845
 846         if (parent->rphy)
 847                 return -ENXIO;
 848         parent->rphy = rphy;
 849
 850         error = device_add(&rphy->dev);
 851         if (error)
 852                 return error;
 853         transport_add_device(&rphy->dev);
 854         transport_configure_device(&rphy->dev);
 855
 856         mutex_lock(&sas_host->lock);
 857         list_add_tail(&rphy->list, &sas_host->rphy_list);
 858         if (identify->device_type == SAS_END_DEVICE &&
 859             (identify->target_port_protocols &
 860              (SAS_PROTOCOL_SSP|SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA)))
 861                 rphy->scsi_target_id = sas_host->next_target_id++;
 862         else if (identify->device_type == SAS_END_DEVICE)
 863                 rphy->scsi_target_id = -1;
 864         mutex_unlock(&sas_host->lock);
 865
 866         if (identify->device_type == SAS_END_DEVICE &&
 867             rphy->scsi_target_id != -1) {
 868                 scsi_scan_target(&rphy->dev, parent->port_identifier,
 869                                 rphy->scsi_target_id, ~0, 0);
 870         }
 871
 872         return 0;
 873 }
 874 EXPORT_SYMBOL(sas_rphy_add);
 875
 876 /**
 877  * sas_rphy_free  --  free a SAS remote PHY
 878  * @rphy        SAS remote PHY to free
 879  *
 880  * Frees the specified SAS remote PHY.
 881  *
 882  * Note:
 883  *   This function must only be called on a remote
 884  *   PHY that has not sucessfully been added using
 885  *   sas_rphy_add().
 886  */
 887 void sas_rphy_free(struct sas_rphy *rphy)
 888 {
 889         struct device *dev = &rphy->dev;
 890         struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
 891         struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 892
 893         mutex_lock(&sas_host->lock);
 894         list_del(&rphy->list);
 895         mutex_unlock(&sas_host->lock);
 896
 897         transport_destroy_device(dev);
 898
 899         put_device(dev);
 900 }
 901 EXPORT_SYMBOL(sas_rphy_free);
 902
 903 /**
 904  * sas_rphy_delete  --  remove SAS remote PHY
 905  * @rphy:       SAS remote PHY to remove
 906  *
 907  * Removes the specified SAS remote PHY.
 908  */
 909 void
 910 sas_rphy_delete(struct sas_rphy *rphy)
 911 {
 912         struct device *dev = &rphy->dev;
 913         struct sas_phy *parent = dev_to_phy(dev->parent);
 914         struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
 915         struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 916
 917         switch (rphy->identify.device_type) {
 918         case SAS_END_DEVICE:
 919                 scsi_remove_target(dev);
 920                 break;
 921         case SAS_EDGE_EXPANDER_DEVICE:
 922         case SAS_FANOUT_EXPANDER_DEVICE:
 923                 device_for_each_child(dev, NULL, do_sas_phy_delete);
 924                 break;
 925         default:
 926                 break;
 927         }
 928
 929         transport_remove_device(dev);
 930         device_del(dev);
 931         transport_destroy_device(dev);
 932
 933         mutex_lock(&sas_host->lock);
 934         list_del(&rphy->list);
 935         mutex_unlock(&sas_host->lock);
 936
 937         parent->rphy = NULL;
 938
 939         put_device(dev);
 940 }
 941 EXPORT_SYMBOL(sas_rphy_delete);
 942
 943 /**
 944  * scsi_is_sas_rphy  --  check if a struct device represents a SAS remote PHY
 945  * @dev:        device to check
 946  *
 947  * Returns:
 948  *      %1 if the device represents a SAS remote PHY, %0 else
 949  */
 950 int scsi_is_sas_rphy(const struct device *dev)
 951 {
 952         return dev->release == sas_end_device_release ||
 953                 dev->release == sas_expander_release;
 954 }
 955 EXPORT_SYMBOL(scsi_is_sas_rphy);
 956
 957
 958 /*
 959  * SCSI scan helper
 960  */
 961
 962 static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 963                 uint id, uint lun)
 964 {
 965         struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 966         struct sas_rphy *rphy;
 967
 968         mutex_lock(&sas_host->lock);
 969         list_for_each_entry(rphy, &sas_host->rphy_list, list) {
 970                 struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
 971
 972                 if (rphy->identify.device_type != SAS_END_DEVICE ||
 973                     rphy->scsi_target_id == -1)
 974                         continue;
 975
 976                 if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
 977                     (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) {
 978                         scsi_scan_target(&rphy->dev, parent->port_identifier,
 979                                          rphy->scsi_target_id, lun, 1);
 980                 }
 981         }
 982         mutex_unlock(&sas_host->lock);
 983
 984         return 0;
 985 }
 986
 987
 988 /*
 989  * Setup / Teardown code
 990  */
 991
 992 #define SETUP_TEMPLATE(attrb, field, perm, test)                                \
 993         i->private_##attrb[count] = class_device_attr_##field;          \
 994         i->private_##attrb[count].attr.mode = perm;                     \
 995         i->attrb[count] = &i->private_##attrb[count];                   \
 996         if (test)                                                       \
 997                 count++
 998
 999
1000 #define SETUP_RPORT_ATTRIBUTE(field)                                    \
1001         SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, 1)
1002
1003 #define SETUP_OPTIONAL_RPORT_ATTRIBUTE(field, func)                     \
1004         SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, i->f->func)
1005
1006 #define SETUP_PORT_ATTRIBUTE(field)                                     \
1007         SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1)
1008
1009 #define SETUP_OPTIONAL_PORT_ATTRIBUTE(field, func)                      \
1010         SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func)
1011
1012 #define SETUP_PORT_ATTRIBUTE_WRONLY(field)                              \
1013         SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, 1)
1014
1015 #define SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(field, func)               \
1016         SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, i->f->func)
1017
1018 #define SETUP_END_DEV_ATTRIBUTE(field)                                  \
1019         SETUP_TEMPLATE(end_dev_attrs, field, S_IRUGO, 1)
1020
1021 #define SETUP_EXPANDER_ATTRIBUTE(field)                                 \
1022         SETUP_TEMPLATE(expander_attrs, expander_##field, S_IRUGO, 1)
1023
1024 /**
1025  * sas_attach_transport  --  instantiate SAS transport template
1026  * @ft:         SAS transport class function template
1027  */
1028 struct scsi_transport_template *
1029 sas_attach_transport(struct sas_function_template *ft)
1030 {
1031         struct sas_internal *i;
1032         int count;
1033
1034         i = kzalloc(sizeof(struct sas_internal), GFP_KERNEL);
1035         if (!i)
1036                 return NULL;
1037
1038         i->t.user_scan = sas_user_scan;
1039
1040         i->t.host_attrs.ac.attrs = &i->host_attrs[0];
1041         i->t.host_attrs.ac.class = &sas_host_class.class;
1042         i->t.host_attrs.ac.match = sas_host_match;
1043         transport_container_register(&i->t.host_attrs);
1044         i->t.host_size = sizeof(struct sas_host_attrs);
1045
1046         i->phy_attr_cont.ac.class = &sas_phy_class.class;
1047         i->phy_attr_cont.ac.attrs = &i->phy_attrs[0];
1048         i->phy_attr_cont.ac.match = sas_phy_match;
1049         transport_container_register(&i->phy_attr_cont);
1050
1051         i->rphy_attr_cont.ac.class = &sas_rphy_class.class;
1052         i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0];
1053         i->rphy_attr_cont.ac.match = sas_rphy_match;
1054         transport_container_register(&i->rphy_attr_cont);
1055
1056         i->end_dev_attr_cont.ac.class = &sas_end_dev_class.class;
1057         i->end_dev_attr_cont.ac.attrs = &i->end_dev_attrs[0];
1058         i->end_dev_attr_cont.ac.match = sas_end_dev_match;
1059         transport_container_register(&i->end_dev_attr_cont);
1060
1061         i->expander_attr_cont.ac.class = &sas_expander_class.class;
1062         i->expander_attr_cont.ac.attrs = &i->expander_attrs[0];
1063         i->expander_attr_cont.ac.match = sas_expander_match;
1064         transport_container_register(&i->expander_attr_cont);
1065
1066         i->f = ft;
1067
1068         count = 0;
1069         i->host_attrs[count] = NULL;
1070
1071         count = 0;
1072         SETUP_PORT_ATTRIBUTE(initiator_port_protocols);
1073         SETUP_PORT_ATTRIBUTE(target_port_protocols);
1074         SETUP_PORT_ATTRIBUTE(device_type);
1075         SETUP_PORT_ATTRIBUTE(sas_address);
1076         SETUP_PORT_ATTRIBUTE(phy_identifier);
1077         SETUP_PORT_ATTRIBUTE(port_identifier);
1078         SETUP_PORT_ATTRIBUTE(negotiated_linkrate);
1079         SETUP_PORT_ATTRIBUTE(minimum_linkrate_hw);
1080         SETUP_PORT_ATTRIBUTE(minimum_linkrate);
1081         SETUP_PORT_ATTRIBUTE(maximum_linkrate_hw);
1082         SETUP_PORT_ATTRIBUTE(maximum_linkrate);
1083
1084         SETUP_PORT_ATTRIBUTE(invalid_dword_count);
1085         SETUP_PORT_ATTRIBUTE(running_disparity_error_count);
1086         SETUP_PORT_ATTRIBUTE(loss_of_dword_sync_count);
1087         SETUP_PORT_ATTRIBUTE(phy_reset_problem_count);
1088         SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(link_reset, phy_reset);
1089         SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(hard_reset, phy_reset);
1090         i->phy_attrs[count] = NULL;
1091
1092         count = 0;
1093         SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols);
1094         SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols);
1095         SETUP_RPORT_ATTRIBUTE(rphy_device_type);
1096         SETUP_RPORT_ATTRIBUTE(rphy_sas_address);
1097         SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier);
1098         SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_enclosure_identifier,
1099                                        get_enclosure_identifier);
1100         SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_bay_identifier,
1101                                        get_bay_identifier);
1102         i->rphy_attrs[count] = NULL;
1103
1104         count = 0;
1105         SETUP_END_DEV_ATTRIBUTE(end_dev_ready_led_meaning);
1106         SETUP_END_DEV_ATTRIBUTE(end_dev_I_T_nexus_loss_timeout);
1107         SETUP_END_DEV_ATTRIBUTE(end_dev_initiator_response_timeout);
1108         i->end_dev_attrs[count] = NULL;
1109
1110         count = 0;
1111         SETUP_EXPANDER_ATTRIBUTE(vendor_id);
1112         SETUP_EXPANDER_ATTRIBUTE(product_id);
1113         SETUP_EXPANDER_ATTRIBUTE(product_rev);
1114         SETUP_EXPANDER_ATTRIBUTE(component_vendor_id);
1115         SETUP_EXPANDER_ATTRIBUTE(component_id);
1116         SETUP_EXPANDER_ATTRIBUTE(component_revision_id);
1117         SETUP_EXPANDER_ATTRIBUTE(level);
1118         i->expander_attrs[count] = NULL;
1119
1120         return &i->t;
1121 }
1122 EXPORT_SYMBOL(sas_attach_transport);
1123
1124 /**
1125  * sas_release_transport  --  release SAS transport template instance
1126  * @t:          transport template instance
1127  */
1128 void sas_release_transport(struct scsi_transport_template *t)
1129 {
1130         struct sas_internal *i = to_sas_internal(t);
1131
1132         transport_container_unregister(&i->t.host_attrs);
1133         transport_container_unregister(&i->phy_attr_cont);
1134         transport_container_unregister(&i->rphy_attr_cont);
1135         transport_container_unregister(&i->end_dev_attr_cont);
1136         transport_container_unregister(&i->expander_attr_cont);
1137
1138         kfree(i);
1139 }
1140 EXPORT_SYMBOL(sas_release_transport);
1141
1142 static __init int sas_transport_init(void)
1143 {
1144         int error;
1145
1146         error = transport_class_register(&sas_host_class);
1147         if (error)
1148                 goto out;
1149         error = transport_class_register(&sas_phy_class);
1150         if (error)
1151                 goto out_unregister_transport;
1152         error = transport_class_register(&sas_rphy_class);
1153         if (error)
1154                 goto out_unregister_phy;
1155         error = transport_class_register(&sas_end_dev_class);
1156         if (error)
1157                 goto out_unregister_rphy;
1158         error = transport_class_register(&sas_expander_class);
1159         if (error)
1160                 goto out_unregister_end_dev;
1161
1162         return 0;
1163
1164  out_unregister_end_dev:
1165         transport_class_unregister(&sas_end_dev_class);
1166  out_unregister_rphy:
1167         transport_class_unregister(&sas_rphy_class);
1168  out_unregister_phy:
1169         transport_class_unregister(&sas_phy_class);
1170  out_unregister_transport:
1171         transport_class_unregister(&sas_host_class);
1172  out:
1173         return error;
1174
1175 }
1176
1177 static void __exit sas_transport_exit(void)
1178 {
1179         transport_class_unregister(&sas_host_class);
1180         transport_class_unregister(&sas_phy_class);
1181         transport_class_unregister(&sas_rphy_class);
1182         transport_class_unregister(&sas_end_dev_class);
1183         transport_class_unregister(&sas_expander_class);
1184 }
1185
1186 MODULE_AUTHOR("Christoph Hellwig");
1187 MODULE_DESCRIPTION("SAS Transphy Attributes");
1188 MODULE_LICENSE("GPL");
1189
1190 module_init(sas_transport_init);
1191 module_exit(sas_transport_exit);