drivers/scsi/pcmcia/nsp_cs.c

   1 /*======================================================================
   2
   3     NinjaSCSI-3 / NinjaSCSI-32Bi PCMCIA SCSI host adapter card driver
   4       By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
   5
   6     Ver.2.8   Support 32bit MMIO mode
   7               Support Synchronous Data Transfer Request (SDTR) mode
   8     Ver.2.0   Support 32bit PIO mode
   9     Ver.1.1.2 Fix for scatter list buffer exceeds
  10     Ver.1.1   Support scatter list
  11     Ver.0.1   Initial version
  12
  13     This software may be used and distributed according to the terms of
  14     the GNU General Public License.
  15
  16 ======================================================================*/
  17
  18 /***********************************************************************
  19     This driver is for these PCcards.
  20
  21         I-O DATA PCSC-F  (Workbit NinjaSCSI-3)
  22                         "WBT", "NinjaSCSI-3", "R1.0"
  23         I-O DATA CBSC-II (Workbit NinjaSCSI-32Bi in 16bit mode)
  24                         "IO DATA", "CBSC16       ", "1"
  25
  26 ***********************************************************************/
  27
  28 #include <linux/module.h>
  29 #include <linux/kernel.h>
  30 #include <linux/init.h>
  31 #include <linux/slab.h>
  32 #include <linux/string.h>
  33 #include <linux/timer.h>
  34 #include <linux/ioport.h>
  35 #include <linux/delay.h>
  36 #include <linux/interrupt.h>
  37 #include <linux/major.h>
  38 #include <linux/blkdev.h>
  39 #include <linux/stat.h>
  40
  41 #include <asm/io.h>
  42 #include <asm/irq.h>
  43
  44 #include <../drivers/scsi/scsi.h>
  45 #include <scsi/scsi_host.h>
  46
  47 #include <scsi/scsi.h>
  48 #include <scsi/scsi_ioctl.h>
  49
  50 #include <pcmcia/cistpl.h>
  51 #include <pcmcia/cisreg.h>
  52 #include <pcmcia/ds.h>
  53
  54 #include "nsp_cs.h"
  55
  56 MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>");
  57 MODULE_DESCRIPTION("WorkBit NinjaSCSI-3 / NinjaSCSI-32Bi(16bit) PCMCIA SCSI host adapter module");
  58 MODULE_SUPPORTED_DEVICE("sd,sr,sg,st");
  59 #ifdef MODULE_LICENSE
  60 MODULE_LICENSE("GPL");
  61 #endif
  62
  63 #include "nsp_io.h"
  64
  65 /*====================================================================*/
  66 /* Parameters that can be set with 'insmod' */
  67
  68 static int       nsp_burst_mode = BURST_MEM32;
  69 module_param(nsp_burst_mode, int, 0);
  70 MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))");
  71
  72 /* Release IO ports after configuration? */
  73 static int       free_ports = 0;
  74 module_param(free_ports, bool, 0);
  75 MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))");
  76
  77 static struct scsi_host_template nsp_driver_template = {
  78         .proc_name               = "nsp_cs",
  79         .proc_info               = nsp_proc_info,
  80         .name                    = "WorkBit NinjaSCSI-3/32Bi(16bit)",
  81         .info                    = nsp_info,
  82         .queuecommand            = nsp_queuecommand,
  83 /*      .eh_abort_handler        = nsp_eh_abort,*/
  84         .eh_bus_reset_handler    = nsp_eh_bus_reset,
  85         .eh_host_reset_handler   = nsp_eh_host_reset,
  86         .can_queue               = 1,
  87         .this_id                 = NSP_INITIATOR_ID,
  88         .sg_tablesize            = SG_ALL,
  89         .cmd_per_lun             = 1,
  90         .use_clustering          = DISABLE_CLUSTERING,
  91 };
  92
  93 static nsp_hw_data nsp_data_base; /* attach <-> detect glue */
  94
  95
  96
  97 /*
  98  * debug, error print
  99  */
 100 #ifndef NSP_DEBUG
 101 # define NSP_DEBUG_MASK         0x000000
 102 # define nsp_msg(type, args...) nsp_cs_message("", 0, (type), args)
 103 # define nsp_dbg(mask, args...) /* */
 104 #else
 105 # define NSP_DEBUG_MASK         0xffffff
 106 # define nsp_msg(type, args...) \
 107         nsp_cs_message (__func__, __LINE__, (type), args)
 108 # define nsp_dbg(mask, args...) \
 109         nsp_cs_dmessage(__func__, __LINE__, (mask), args)
 110 #endif
 111
 112 #define NSP_DEBUG_QUEUECOMMAND          BIT(0)
 113 #define NSP_DEBUG_REGISTER              BIT(1)
 114 #define NSP_DEBUG_AUTOSCSI              BIT(2)
 115 #define NSP_DEBUG_INTR                  BIT(3)
 116 #define NSP_DEBUG_SGLIST                BIT(4)
 117 #define NSP_DEBUG_BUSFREE               BIT(5)
 118 #define NSP_DEBUG_CDB_CONTENTS          BIT(6)
 119 #define NSP_DEBUG_RESELECTION           BIT(7)
 120 #define NSP_DEBUG_MSGINOCCUR            BIT(8)
 121 #define NSP_DEBUG_EEPROM                BIT(9)
 122 #define NSP_DEBUG_MSGOUTOCCUR           BIT(10)
 123 #define NSP_DEBUG_BUSRESET              BIT(11)
 124 #define NSP_DEBUG_RESTART               BIT(12)
 125 #define NSP_DEBUG_SYNC                  BIT(13)
 126 #define NSP_DEBUG_WAIT                  BIT(14)
 127 #define NSP_DEBUG_TARGETFLAG            BIT(15)
 128 #define NSP_DEBUG_PROC                  BIT(16)
 129 #define NSP_DEBUG_INIT                  BIT(17)
 130 #define NSP_DEBUG_DATA_IO               BIT(18)
 131 #define NSP_SPECIAL_PRINT_REGISTER      BIT(20)
 132
 133 #define NSP_DEBUG_BUF_LEN               150
 134
 135 static inline void nsp_inc_resid(struct scsi_cmnd *SCpnt, int residInc)
 136 {
 137         scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) + residInc);
 138 }
 139
 140 static void nsp_cs_message(const char *func, int line, char *type, char *fmt, ...)
 141 {
 142         va_list args;
 143         char buf[NSP_DEBUG_BUF_LEN];
 144
 145         va_start(args, fmt);
 146         vsnprintf(buf, sizeof(buf), fmt, args);
 147         va_end(args);
 148
 149 #ifndef NSP_DEBUG
 150         printk("%snsp_cs: %s\n", type, buf);
 151 #else
 152         printk("%snsp_cs: %s (%d): %s\n", type, func, line, buf);
 153 #endif
 154 }
 155
 156 #ifdef NSP_DEBUG
 157 static void nsp_cs_dmessage(const char *func, int line, int mask, char *fmt, ...)
 158 {
 159         va_list args;
 160         char buf[NSP_DEBUG_BUF_LEN];
 161
 162         va_start(args, fmt);
 163         vsnprintf(buf, sizeof(buf), fmt, args);
 164         va_end(args);
 165
 166         if (mask & NSP_DEBUG_MASK) {
 167                 printk("nsp_cs-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
 168         }
 169 }
 170 #endif
 171
 172 /***********************************************************/
 173
 174 /*====================================================
 175  * Clenaup parameters and call done() functions.
 176  * You must be set SCpnt->result before call this function.
 177  */
 178 static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
 179 {
 180         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 181
 182         data->CurrentSC = NULL;
 183
 184         SCpnt->scsi_done(SCpnt);
 185 }
 186
 187 static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
 188                             void (*done)(struct scsi_cmnd *))
 189 {
 190 #ifdef NSP_DEBUG
 191         /*unsigned int host_id = SCpnt->device->host->this_id;*/
 192         /*unsigned int base    = SCpnt->device->host->io_port;*/
 193         unsigned char target = scmd_id(SCpnt);
 194 #endif
 195         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 196
 197         nsp_dbg(NSP_DEBUG_QUEUECOMMAND,
 198                 "SCpnt=0x%p target=%d lun=%d sglist=0x%p bufflen=%d sg_count=%d",
 199                 SCpnt, target, SCpnt->device->lun, scsi_sglist(SCpnt),
 200                 scsi_bufflen(SCpnt), scsi_sg_count(SCpnt));
 201         //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC);
 202
 203         SCpnt->scsi_done        = done;
 204
 205         if (data->CurrentSC != NULL) {
 206                 nsp_msg(KERN_DEBUG, "CurrentSC!=NULL this can't be happen");
 207                 SCpnt->result   = DID_BAD_TARGET << 16;
 208                 nsp_scsi_done(SCpnt);
 209                 return 0;
 210         }
 211
 212 #if 0
 213         /* XXX: pcmcia-cs generates SCSI command with "scsi_info" utility.
 214                 This makes kernel crash when suspending... */
 215         if (data->ScsiInfo->stop != 0) {
 216                 nsp_msg(KERN_INFO, "suspending device. reject command.");
 217                 SCpnt->result  = DID_BAD_TARGET << 16;
 218                 nsp_scsi_done(SCpnt);
 219                 return SCSI_MLQUEUE_HOST_BUSY;
 220         }
 221 #endif
 222
 223         show_command(SCpnt);
 224
 225         data->CurrentSC         = SCpnt;
 226
 227         SCpnt->SCp.Status       = CHECK_CONDITION;
 228         SCpnt->SCp.Message      = 0;
 229         SCpnt->SCp.have_data_in = IO_UNKNOWN;
 230         SCpnt->SCp.sent_command = 0;
 231         SCpnt->SCp.phase        = PH_UNDETERMINED;
 232         scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
 233
 234         /* setup scratch area
 235            SCp.ptr              : buffer pointer
 236            SCp.this_residual    : buffer length
 237            SCp.buffer           : next buffer
 238            SCp.buffers_residual : left buffers in list
 239            SCp.phase            : current state of the command */
 240         if (scsi_bufflen(SCpnt)) {
 241                 SCpnt->SCp.buffer           = scsi_sglist(SCpnt);
 242                 SCpnt->SCp.ptr              = BUFFER_ADDR;
 243                 SCpnt->SCp.this_residual    = SCpnt->SCp.buffer->length;
 244                 SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1;
 245         } else {
 246                 SCpnt->SCp.ptr              = NULL;
 247                 SCpnt->SCp.this_residual    = 0;
 248                 SCpnt->SCp.buffer           = NULL;
 249                 SCpnt->SCp.buffers_residual = 0;
 250         }
 251
 252         if (nsphw_start_selection(SCpnt) == FALSE) {
 253                 nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail");
 254                 SCpnt->result   = DID_BUS_BUSY << 16;
 255                 nsp_scsi_done(SCpnt);
 256                 return 0;
 257         }
 258
 259
 260         //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "out");
 261 #ifdef NSP_DEBUG
 262         data->CmdId++;
 263 #endif
 264         return 0;
 265 }
 266
 267 /*
 268  * setup PIO FIFO transfer mode and enable/disable to data out
 269  */
 270 static void nsp_setup_fifo(nsp_hw_data *data, int enabled)
 271 {
 272         unsigned int  base = data->BaseAddress;
 273         unsigned char transfer_mode_reg;
 274
 275         //nsp_dbg(NSP_DEBUG_DATA_IO, "enabled=%d", enabled);
 276
 277         if (enabled != FALSE) {
 278                 transfer_mode_reg = TRANSFER_GO | BRAIND;
 279         } else {
 280                 transfer_mode_reg = 0;
 281         }
 282
 283         transfer_mode_reg |= data->TransferMode;
 284
 285         nsp_index_write(base, TRANSFERMODE, transfer_mode_reg);
 286 }
 287
 288 static void nsphw_init_sync(nsp_hw_data *data)
 289 {
 290         sync_data tmp_sync = { .SyncNegotiation = SYNC_NOT_YET,
 291                                .SyncPeriod      = 0,
 292                                .SyncOffset      = 0
 293         };
 294         int i;
 295
 296         /* setup sync data */
 297         for ( i = 0; i < ARRAY_SIZE(data->Sync); i++ ) {
 298                 data->Sync[i] = tmp_sync;
 299         }
 300 }
 301
 302 /*
 303  * Initialize Ninja hardware
 304  */
 305 static int nsphw_init(nsp_hw_data *data)
 306 {
 307         unsigned int base     = data->BaseAddress;
 308
 309         nsp_dbg(NSP_DEBUG_INIT, "in base=0x%x", base);
 310
 311         data->ScsiClockDiv = CLOCK_40M | FAST_20;
 312         data->CurrentSC    = NULL;
 313         data->FifoCount    = 0;
 314         data->TransferMode = MODE_IO8;
 315
 316         nsphw_init_sync(data);
 317
 318         /* block all interrupts */
 319         nsp_write(base,       IRQCONTROL,   IRQCONTROL_ALLMASK);
 320
 321         /* setup SCSI interface */
 322         nsp_write(base,       IFSELECT,     IF_IFSEL);
 323
 324         nsp_index_write(base, SCSIIRQMODE,  0);
 325
 326         nsp_index_write(base, TRANSFERMODE, MODE_IO8);
 327         nsp_index_write(base, CLOCKDIV,     data->ScsiClockDiv);
 328
 329         nsp_index_write(base, PARITYCTRL,   0);
 330         nsp_index_write(base, POINTERCLR,   POINTER_CLEAR     |
 331                                             ACK_COUNTER_CLEAR |
 332                                             REQ_COUNTER_CLEAR |
 333                                             HOST_COUNTER_CLEAR);
 334
 335         /* setup fifo asic */
 336         nsp_write(base,       IFSELECT,     IF_REGSEL);
 337         nsp_index_write(base, TERMPWRCTRL,  0);
 338         if ((nsp_index_read(base, OTHERCONTROL) & TPWR_SENSE) == 0) {
 339                 nsp_msg(KERN_INFO, "terminator power on");
 340                 nsp_index_write(base, TERMPWRCTRL, POWER_ON);
 341         }
 342
 343         nsp_index_write(base, TIMERCOUNT,   0);
 344         nsp_index_write(base, TIMERCOUNT,   0); /* requires 2 times!! */
 345
 346         nsp_index_write(base, SYNCREG,      0);
 347         nsp_index_write(base, ACKWIDTH,     0);
 348
 349         /* enable interrupts and ack them */
 350         nsp_index_write(base, SCSIIRQMODE,  SCSI_PHASE_CHANGE_EI |
 351                                             RESELECT_EI          |
 352                                             SCSI_RESET_IRQ_EI    );
 353         nsp_write(base,       IRQCONTROL,   IRQCONTROL_ALLCLEAR);
 354
 355         nsp_setup_fifo(data, FALSE);
 356
 357         return TRUE;
 358 }
 359
 360 /*
 361  * Start selection phase
 362  */
 363 static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
 364 {
 365         unsigned int  host_id    = SCpnt->device->host->this_id;
 366         unsigned int  base       = SCpnt->device->host->io_port;
 367         unsigned char target     = scmd_id(SCpnt);
 368         nsp_hw_data  *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 369         int           time_out;
 370         unsigned char phase, arbit;
 371
 372         //nsp_dbg(NSP_DEBUG_RESELECTION, "in");
 373
 374         phase = nsp_index_read(base, SCSIBUSMON);
 375         if(phase != BUSMON_BUS_FREE) {
 376                 //nsp_dbg(NSP_DEBUG_RESELECTION, "bus busy");
 377                 return FALSE;
 378         }
 379
 380         /* start arbitration */
 381         //nsp_dbg(NSP_DEBUG_RESELECTION, "start arbit");
 382         SCpnt->SCp.phase = PH_ARBSTART;
 383         nsp_index_write(base, SETARBIT, ARBIT_GO);
 384
 385         time_out = 1000;
 386         do {
 387                 /* XXX: what a stupid chip! */
 388                 arbit = nsp_index_read(base, ARBITSTATUS);
 389                 //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit=%d, wait_count=%d", arbit, wait_count);
 390                 udelay(1); /* hold 1.2us */
 391         } while((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 &&
 392                 (time_out-- != 0));
 393
 394         if (!(arbit & ARBIT_WIN)) {
 395                 //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit fail");
 396                 nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR);
 397                 return FALSE;
 398         }
 399
 400         /* assert select line */
 401         //nsp_dbg(NSP_DEBUG_RESELECTION, "assert SEL line");
 402         SCpnt->SCp.phase = PH_SELSTART;
 403         udelay(3); /* wait 2.4us */
 404         nsp_index_write(base, SCSIDATALATCH, BIT(host_id) | BIT(target));
 405         nsp_index_write(base, SCSIBUSCTRL,   SCSI_SEL | SCSI_BSY                    | SCSI_ATN);
 406         udelay(2); /* wait >1.2us */
 407         nsp_index_write(base, SCSIBUSCTRL,   SCSI_SEL | SCSI_BSY | SCSI_DATAOUT_ENB | SCSI_ATN);
 408         nsp_index_write(base, SETARBIT,      ARBIT_FLAG_CLEAR);
 409         /*udelay(1);*/ /* wait >90ns */
 410         nsp_index_write(base, SCSIBUSCTRL,   SCSI_SEL            | SCSI_DATAOUT_ENB | SCSI_ATN);
 411
 412         /* check selection timeout */
 413         nsp_start_timer(SCpnt, 1000/51);
 414         data->SelectionTimeOut = 1;
 415
 416         return TRUE;
 417 }
 418
 419 struct nsp_sync_table {
 420         unsigned int min_period;
 421         unsigned int max_period;
 422         unsigned int chip_period;
 423         unsigned int ack_width;
 424 };
 425
 426 static struct nsp_sync_table nsp_sync_table_40M[] = {
 427         {0x0c, 0x0c, 0x1, 0},   /* 20MB   50ns*/
 428         {0x19, 0x19, 0x3, 1},   /* 10MB  100ns*/
 429         {0x1a, 0x25, 0x5, 2},   /* 7.5MB 150ns*/
 430         {0x26, 0x32, 0x7, 3},   /* 5MB   200ns*/
 431         {   0,    0,   0, 0},
 432 };
 433
 434 static struct nsp_sync_table nsp_sync_table_20M[] = {
 435         {0x19, 0x19, 0x1, 0},   /* 10MB  100ns*/
 436         {0x1a, 0x25, 0x2, 0},   /* 7.5MB 150ns*/
 437         {0x26, 0x32, 0x3, 1},   /* 5MB   200ns*/
 438         {   0,    0,   0, 0},
 439 };
 440
 441 /*
 442  * setup synchronous data transfer mode
 443  */
 444 static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
 445 {
 446         unsigned char          target = scmd_id(SCpnt);
 447 //      unsigned char          lun    = SCpnt->device->lun;
 448         nsp_hw_data           *data   = (nsp_hw_data *)SCpnt->device->host->hostdata;
 449         sync_data             *sync   = &(data->Sync[target]);
 450         struct nsp_sync_table *sync_table;
 451         unsigned int           period, offset;
 452         int                    i;
 453
 454
 455         nsp_dbg(NSP_DEBUG_SYNC, "in");
 456
 457         period = sync->SyncPeriod;
 458         offset = sync->SyncOffset;
 459
 460         nsp_dbg(NSP_DEBUG_SYNC, "period=0x%x, offset=0x%x", period, offset);
 461
 462         if ((data->ScsiClockDiv & (BIT(0)|BIT(1))) == CLOCK_20M) {
 463                 sync_table = nsp_sync_table_20M;
 464         } else {
 465                 sync_table = nsp_sync_table_40M;
 466         }
 467
 468         for ( i = 0; sync_table->max_period != 0; i++, sync_table++) {
 469                 if ( period >= sync_table->min_period &&
 470                      period <= sync_table->max_period    ) {
 471                         break;
 472                 }
 473         }
 474
 475         if (period != 0 && sync_table->max_period == 0) {
 476                 /*
 477                  * No proper period/offset found
 478                  */
 479                 nsp_dbg(NSP_DEBUG_SYNC, "no proper period/offset");
 480
 481                 sync->SyncPeriod      = 0;
 482                 sync->SyncOffset      = 0;
 483                 sync->SyncRegister    = 0;
 484                 sync->AckWidth        = 0;
 485
 486                 return FALSE;
 487         }
 488
 489         sync->SyncRegister    = (sync_table->chip_period << SYNCREG_PERIOD_SHIFT) |
 490                                 (offset & SYNCREG_OFFSET_MASK);
 491         sync->AckWidth        = sync_table->ack_width;
 492
 493         nsp_dbg(NSP_DEBUG_SYNC, "sync_reg=0x%x, ack_width=0x%x", sync->SyncRegister, sync->AckWidth);
 494
 495         return TRUE;
 496 }
 497
 498
 499 /*
 500  * start ninja hardware timer
 501  */
 502 static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time)
 503 {
 504         unsigned int base = SCpnt->device->host->io_port;
 505         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 506
 507         //nsp_dbg(NSP_DEBUG_INTR, "in SCpnt=0x%p, time=%d", SCpnt, time);
 508         data->TimerCount = time;
 509         nsp_index_write(base, TIMERCOUNT, time);
 510 }
 511
 512 /*
 513  * wait for bus phase change
 514  */
 515 static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
 516                              char *str)
 517 {
 518         unsigned int  base = SCpnt->device->host->io_port;
 519         unsigned char reg;
 520         int           time_out;
 521
 522         //nsp_dbg(NSP_DEBUG_INTR, "in");
 523
 524         time_out = 100;
 525
 526         do {
 527                 reg = nsp_index_read(base, SCSIBUSMON);
 528                 if (reg == 0xff) {
 529                         break;
 530                 }
 531         } while ((--time_out != 0) && (reg & mask) != 0);
 532
 533         if (time_out == 0) {
 534                 nsp_msg(KERN_DEBUG, " %s signal off timeut", str);
 535         }
 536
 537         return 0;
 538 }
 539
 540 /*
 541  * expect Ninja Irq
 542  */
 543 static int nsp_expect_signal(struct scsi_cmnd *SCpnt,
 544                              unsigned char current_phase,
 545                              unsigned char mask)
 546 {
 547         unsigned int  base       = SCpnt->device->host->io_port;
 548         int           time_out;
 549         unsigned char phase, i_src;
 550
 551         //nsp_dbg(NSP_DEBUG_INTR, "current_phase=0x%x, mask=0x%x", current_phase, mask);
 552
 553         time_out = 100;
 554         do {
 555                 phase = nsp_index_read(base, SCSIBUSMON);
 556                 if (phase == 0xff) {
 557                         //nsp_dbg(NSP_DEBUG_INTR, "ret -1");
 558                         return -1;
 559                 }
 560                 i_src = nsp_read(base, IRQSTATUS);
 561                 if (i_src & IRQSTATUS_SCSI) {
 562                         //nsp_dbg(NSP_DEBUG_INTR, "ret 0 found scsi signal");
 563                         return 0;
 564                 }
 565                 if ((phase & mask) != 0 && (phase & BUSMON_PHASE_MASK) == current_phase) {
 566                         //nsp_dbg(NSP_DEBUG_INTR, "ret 1 phase=0x%x", phase);
 567                         return 1;
 568                 }
 569         } while(time_out-- != 0);
 570
 571         //nsp_dbg(NSP_DEBUG_INTR, "timeout");
 572         return -1;
 573 }
 574
 575 /*
 576  * transfer SCSI message
 577  */
 578 static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase)
 579 {
 580         unsigned int  base = SCpnt->device->host->io_port;
 581         nsp_hw_data  *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 582         char         *buf  = data->MsgBuffer;
 583         int           len  = min(MSGBUF_SIZE, data->MsgLen);
 584         int           ptr;
 585         int           ret;
 586
 587         //nsp_dbg(NSP_DEBUG_DATA_IO, "in");
 588         for (ptr = 0; len > 0; len--, ptr++) {
 589
 590                 ret = nsp_expect_signal(SCpnt, phase, BUSMON_REQ);
 591                 if (ret <= 0) {
 592                         nsp_dbg(NSP_DEBUG_DATA_IO, "xfer quit");
 593                         return 0;
 594                 }
 595
 596                 /* if last byte, negate ATN */
 597                 if (len == 1 && SCpnt->SCp.phase == PH_MSG_OUT) {
 598                         nsp_index_write(base, SCSIBUSCTRL, AUTODIRECTION | ACKENB);
 599                 }
 600
 601                 /* read & write message */
 602                 if (phase & BUSMON_IO) {
 603                         nsp_dbg(NSP_DEBUG_DATA_IO, "read msg");
 604                         buf[ptr] = nsp_index_read(base, SCSIDATAWITHACK);
 605                 } else {
 606                         nsp_dbg(NSP_DEBUG_DATA_IO, "write msg");
 607                         nsp_index_write(base, SCSIDATAWITHACK, buf[ptr]);
 608                 }
 609                 nsp_negate_signal(SCpnt, BUSMON_ACK, "xfer<ack>");
 610
 611         }
 612         return len;
 613 }
 614
 615 /*
 616  * get extra SCSI data from fifo
 617  */
 618 static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
 619 {
 620         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 621         unsigned int count;
 622
 623         //nsp_dbg(NSP_DEBUG_DATA_IO, "in");
 624
 625         if (SCpnt->SCp.have_data_in != IO_IN) {
 626                 return 0;
 627         }
 628
 629         count = nsp_fifo_count(SCpnt);
 630         if (data->FifoCount == count) {
 631                 //nsp_dbg(NSP_DEBUG_DATA_IO, "not use bypass quirk");
 632                 return 0;
 633         }
 634
 635         /*
 636          * XXX: NSP_QUIRK
 637          * data phase skip only occures in case of SCSI_LOW_READ
 638          */
 639         nsp_dbg(NSP_DEBUG_DATA_IO, "use bypass quirk");
 640         SCpnt->SCp.phase = PH_DATA;
 641         nsp_pio_read(SCpnt);
 642         nsp_setup_fifo(data, FALSE);
 643
 644         return 0;
 645 }
 646
 647 /*
 648  * accept reselection
 649  */
 650 static int nsp_reselected(struct scsi_cmnd *SCpnt)
 651 {
 652         unsigned int  base    = SCpnt->device->host->io_port;
 653         unsigned int  host_id = SCpnt->device->host->this_id;
 654         //nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 655         unsigned char bus_reg;
 656         unsigned char id_reg, tmp;
 657         int target;
 658
 659         nsp_dbg(NSP_DEBUG_RESELECTION, "in");
 660
 661         id_reg = nsp_index_read(base, RESELECTID);
 662         tmp    = id_reg & (~BIT(host_id));
 663         target = 0;
 664         while(tmp != 0) {
 665                 if (tmp & BIT(0)) {
 666                         break;
 667                 }
 668                 tmp >>= 1;
 669                 target++;
 670         }
 671
 672         if (scmd_id(SCpnt) != target) {
 673                 nsp_msg(KERN_ERR, "XXX: reselect ID must be %d in this implementation.", target);
 674         }
 675
 676         nsp_negate_signal(SCpnt, BUSMON_SEL, "reselect<SEL>");
 677
 678         nsp_nexus(SCpnt);
 679         bus_reg = nsp_index_read(base, SCSIBUSCTRL) & ~(SCSI_BSY | SCSI_ATN);
 680         nsp_index_write(base, SCSIBUSCTRL, bus_reg);
 681         nsp_index_write(base, SCSIBUSCTRL, bus_reg | AUTODIRECTION | ACKENB);
 682
 683         return TRUE;
 684 }
 685
 686 /*
 687  * count how many data transferd
 688  */
 689 static int nsp_fifo_count(struct scsi_cmnd *SCpnt)
 690 {
 691         unsigned int base = SCpnt->device->host->io_port;
 692         unsigned int count;
 693         unsigned int l, m, h, dummy;
 694
 695         nsp_index_write(base, POINTERCLR, POINTER_CLEAR | ACK_COUNTER);
 696
 697         l     = nsp_index_read(base, TRANSFERCOUNT);
 698         m     = nsp_index_read(base, TRANSFERCOUNT);
 699         h     = nsp_index_read(base, TRANSFERCOUNT);
 700         dummy = nsp_index_read(base, TRANSFERCOUNT); /* required this! */
 701
 702         count = (h << 16) | (m << 8) | (l << 0);
 703
 704         //nsp_dbg(NSP_DEBUG_DATA_IO, "count=0x%x", count);
 705
 706         return count;
 707 }
 708
 709 /* fifo size */
 710 #define RFIFO_CRIT 64
 711 #define WFIFO_CRIT 64
 712
 713 /*
 714  * read data in DATA IN phase
 715  */
 716 static void nsp_pio_read(struct scsi_cmnd *SCpnt)
 717 {
 718         unsigned int  base      = SCpnt->device->host->io_port;
 719         unsigned long mmio_base = SCpnt->device->host->base;
 720         nsp_hw_data  *data      = (nsp_hw_data *)SCpnt->device->host->hostdata;
 721         long          time_out;
 722         int           ocount, res;
 723         unsigned char stat, fifo_stat;
 724
 725         ocount = data->FifoCount;
 726
 727         nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d",
 728                 SCpnt, scsi_get_resid(SCpnt), ocount, SCpnt->SCp.ptr,
 729                 SCpnt->SCp.this_residual, SCpnt->SCp.buffer,
 730                 SCpnt->SCp.buffers_residual);
 731
 732         time_out = 1000;
 733
 734         while ((time_out-- != 0) &&
 735                (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0 ) ) {
 736
 737                 stat = nsp_index_read(base, SCSIBUSMON);
 738                 stat &= BUSMON_PHASE_MASK;
 739
 740
 741                 res = nsp_fifo_count(SCpnt) - ocount;
 742                 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res);
 743                 if (res == 0) { /* if some data avilable ? */
 744                         if (stat == BUSPHASE_DATA_IN) { /* phase changed? */
 745                                 //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual);
 746                                 continue;
 747                         } else {
 748                                 nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x", stat);
 749                                 break;
 750                         }
 751                 }
 752
 753                 fifo_stat = nsp_read(base, FIFOSTATUS);
 754                 if ((fifo_stat & FIFOSTATUS_FULL_EMPTY) == 0 &&
 755                     stat                                == BUSPHASE_DATA_IN) {
 756                         continue;
 757                 }
 758
 759                 res = min(res, SCpnt->SCp.this_residual);
 760
 761                 switch (data->TransferMode) {
 762                 case MODE_IO32:
 763                         res &= ~(BIT(1)|BIT(0)); /* align 4 */
 764                         nsp_fifo32_read(base, SCpnt->SCp.ptr, res >> 2);
 765                         break;
 766                 case MODE_IO8:
 767                         nsp_fifo8_read (base, SCpnt->SCp.ptr, res     );
 768                         break;
 769
 770                 case MODE_MEM32:
 771                         res &= ~(BIT(1)|BIT(0)); /* align 4 */
 772                         nsp_mmio_fifo32_read(mmio_base, SCpnt->SCp.ptr, res >> 2);
 773                         break;
 774
 775                 default:
 776                         nsp_dbg(NSP_DEBUG_DATA_IO, "unknown read mode");
 777                         return;
 778                 }
 779
 780                 nsp_inc_resid(SCpnt, -res);
 781                 SCpnt->SCp.ptr           += res;
 782                 SCpnt->SCp.this_residual -= res;
 783                 ocount                   += res;
 784                 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this_residual=0x%x ocount=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount);
 785
 786                 /* go to next scatter list if available */
 787                 if (SCpnt->SCp.this_residual    == 0 &&
 788                     SCpnt->SCp.buffers_residual != 0 ) {
 789                         //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next timeout=%d", time_out);
 790                         SCpnt->SCp.buffers_residual--;
 791                         SCpnt->SCp.buffer++;
 792                         SCpnt->SCp.ptr           = BUFFER_ADDR;
 793                         SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
 794                         time_out = 1000;
 795
 796                         //nsp_dbg(NSP_DEBUG_DATA_IO, "page: 0x%p, off: 0x%x", SCpnt->SCp.buffer->page, SCpnt->SCp.buffer->offset);
 797                 }
 798         }
 799
 800         data->FifoCount = ocount;
 801
 802         if (time_out < 0) {
 803                 nsp_msg(KERN_DEBUG, "pio read timeout resid=%d this_residual=%d buffers_residual=%d",
 804                         scsi_get_resid(SCpnt), SCpnt->SCp.this_residual,
 805                         SCpnt->SCp.buffers_residual);
 806         }
 807         nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount);
 808         nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId,
 809                                                         scsi_get_resid(SCpnt));
 810 }
 811
 812 /*
 813  * write data in DATA OUT phase
 814  */
 815 static void nsp_pio_write(struct scsi_cmnd *SCpnt)
 816 {
 817         unsigned int  base      = SCpnt->device->host->io_port;
 818         unsigned long mmio_base = SCpnt->device->host->base;
 819         nsp_hw_data  *data      = (nsp_hw_data *)SCpnt->device->host->hostdata;
 820         int           time_out;
 821         int           ocount, res;
 822         unsigned char stat;
 823
 824         ocount   = data->FifoCount;
 825
 826         nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x",
 827                 data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual,
 828                 SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual,
 829                 scsi_get_resid(SCpnt));
 830
 831         time_out = 1000;
 832
 833         while ((time_out-- != 0) &&
 834                (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0)) {
 835                 stat = nsp_index_read(base, SCSIBUSMON);
 836                 stat &= BUSMON_PHASE_MASK;
 837
 838                 if (stat != BUSPHASE_DATA_OUT) {
 839                         res = ocount - nsp_fifo_count(SCpnt);
 840
 841                         nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res);
 842                         /* Put back pointer */
 843                         nsp_inc_resid(SCpnt, res);
 844                         SCpnt->SCp.ptr           -= res;
 845                         SCpnt->SCp.this_residual += res;
 846                         ocount                   -= res;
 847
 848                         break;
 849                 }
 850
 851                 res = ocount - nsp_fifo_count(SCpnt);
 852                 if (res > 0) { /* write all data? */
 853                         nsp_dbg(NSP_DEBUG_DATA_IO, "wait for all data out. ocount=0x%x res=%d", ocount, res);
 854                         continue;
 855                 }
 856
 857                 res = min(SCpnt->SCp.this_residual, WFIFO_CRIT);
 858
 859                 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, res);
 860                 switch (data->TransferMode) {
 861                 case MODE_IO32:
 862                         res &= ~(BIT(1)|BIT(0)); /* align 4 */
 863                         nsp_fifo32_write(base, SCpnt->SCp.ptr, res >> 2);
 864                         break;
 865                 case MODE_IO8:
 866                         nsp_fifo8_write (base, SCpnt->SCp.ptr, res     );
 867                         break;
 868
 869                 case MODE_MEM32:
 870                         res &= ~(BIT(1)|BIT(0)); /* align 4 */
 871                         nsp_mmio_fifo32_write(mmio_base, SCpnt->SCp.ptr, res >> 2);
 872                         break;
 873
 874                 default:
 875                         nsp_dbg(NSP_DEBUG_DATA_IO, "unknown write mode");
 876                         break;
 877                 }
 878
 879                 nsp_inc_resid(SCpnt, -res);
 880                 SCpnt->SCp.ptr           += res;
 881                 SCpnt->SCp.this_residual -= res;
 882                 ocount                   += res;
 883
 884                 /* go to next scatter list if available */
 885                 if (SCpnt->SCp.this_residual    == 0 &&
 886                     SCpnt->SCp.buffers_residual != 0 ) {
 887                         //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next");
 888                         SCpnt->SCp.buffers_residual--;
 889                         SCpnt->SCp.buffer++;
 890                         SCpnt->SCp.ptr           = BUFFER_ADDR;
 891                         SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
 892                         time_out = 1000;
 893                 }
 894         }
 895
 896         data->FifoCount = ocount;
 897
 898         if (time_out < 0) {
 899                 nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x",
 900                                                         scsi_get_resid(SCpnt));
 901         }
 902         nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount);
 903         nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId,
 904                                                         scsi_get_resid(SCpnt));
 905 }
 906 #undef RFIFO_CRIT
 907 #undef WFIFO_CRIT
 908
 909 /*
 910  * setup synchronous/asynchronous data transfer mode
 911  */
 912 static int nsp_nexus(struct scsi_cmnd *SCpnt)
 913 {
 914         unsigned int   base   = SCpnt->device->host->io_port;
 915         unsigned char  target = scmd_id(SCpnt);
 916 //      unsigned char  lun    = SCpnt->device->lun;
 917         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
 918         sync_data     *sync   = &(data->Sync[target]);
 919
 920         //nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p", SCpnt);
 921
 922         /* setup synch transfer registers */
 923         nsp_index_write(base, SYNCREG,  sync->SyncRegister);
 924         nsp_index_write(base, ACKWIDTH, sync->AckWidth);
 925
 926         if (scsi_get_resid(SCpnt) % 4 != 0 ||
 927             scsi_get_resid(SCpnt) <= PAGE_SIZE ) {
 928                 data->TransferMode = MODE_IO8;
 929         } else if (nsp_burst_mode == BURST_MEM32) {
 930                 data->TransferMode = MODE_MEM32;
 931         } else if (nsp_burst_mode == BURST_IO32) {
 932                 data->TransferMode = MODE_IO32;
 933         } else {
 934                 data->TransferMode = MODE_IO8;
 935         }
 936
 937         /* setup pdma fifo */
 938         nsp_setup_fifo(data, TRUE);
 939
 940         /* clear ack counter */
 941         data->FifoCount = 0;
 942         nsp_index_write(base, POINTERCLR, POINTER_CLEAR     |
 943                                           ACK_COUNTER_CLEAR |
 944                                           REQ_COUNTER_CLEAR |
 945                                           HOST_COUNTER_CLEAR);
 946
 947         return 0;
 948 }
 949
 950 #include "nsp_message.c"
 951 /*
 952  * interrupt handler
 953  */
 954 static irqreturn_t nspintr(int irq, void *dev_id)
 955 {
 956         unsigned int   base;
 957         unsigned char  irq_status, irq_phase, phase;
 958         struct scsi_cmnd *tmpSC;
 959         unsigned char  target, lun;
 960         unsigned int  *sync_neg;
 961         int            i, tmp;
 962         nsp_hw_data   *data;
 963
 964
 965         //nsp_dbg(NSP_DEBUG_INTR, "dev_id=0x%p", dev_id);
 966         //nsp_dbg(NSP_DEBUG_INTR, "host=0x%p", ((scsi_info_t *)dev_id)->host);
 967
 968         if (                dev_id        != NULL &&
 969             ((scsi_info_t *)dev_id)->host != NULL  ) {
 970                 scsi_info_t *info = (scsi_info_t *)dev_id;
 971
 972                 data = (nsp_hw_data *)info->host->hostdata;
 973         } else {
 974                 nsp_dbg(NSP_DEBUG_INTR, "host data wrong");
 975                 return IRQ_NONE;
 976         }
 977
 978         //nsp_dbg(NSP_DEBUG_INTR, "&nsp_data_base=0x%p, dev_id=0x%p", &nsp_data_base, dev_id);
 979
 980         base = data->BaseAddress;
 981         //nsp_dbg(NSP_DEBUG_INTR, "base=0x%x", base);
 982
 983         /*
 984          * interrupt check
 985          */
 986         nsp_write(base, IRQCONTROL, IRQCONTROL_IRQDISABLE);
 987         irq_status = nsp_read(base, IRQSTATUS);
 988         //nsp_dbg(NSP_DEBUG_INTR, "irq_status=0x%x", irq_status);
 989         if ((irq_status == 0xff) || ((irq_status & IRQSTATUS_MASK) == 0)) {
 990                 nsp_write(base, IRQCONTROL, 0);
 991                 //nsp_dbg(NSP_DEBUG_INTR, "no irq/shared irq");
 992                 return IRQ_NONE;
 993         }
 994
 995         /* XXX: IMPORTANT
 996          * Do not read an irq_phase register if no scsi phase interrupt.
 997          * Unless, you should lose a scsi phase interrupt.
 998          */
 999         phase = nsp_index_read(base, SCSIBUSMON);
1000         if((irq_status & IRQSTATUS_SCSI) != 0) {
1001                 irq_phase = nsp_index_read(base, IRQPHASESENCE);
1002         } else {
1003                 irq_phase = 0;
1004         }
1005
1006         //nsp_dbg(NSP_DEBUG_INTR, "irq_phase=0x%x", irq_phase);
1007
1008         /*
1009          * timer interrupt handler (scsi vs timer interrupts)
1010          */
1011         //nsp_dbg(NSP_DEBUG_INTR, "timercount=%d", data->TimerCount);
1012         if (data->TimerCount != 0) {
1013                 //nsp_dbg(NSP_DEBUG_INTR, "stop timer");
1014                 nsp_index_write(base, TIMERCOUNT, 0);
1015                 nsp_index_write(base, TIMERCOUNT, 0);
1016                 data->TimerCount = 0;
1017         }
1018
1019         if ((irq_status & IRQSTATUS_MASK) == IRQSTATUS_TIMER &&
1020             data->SelectionTimeOut == 0) {
1021                 //nsp_dbg(NSP_DEBUG_INTR, "timer start");
1022                 nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR);
1023                 return IRQ_HANDLED;
1024         }
1025
1026         nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR | IRQCONTROL_FIFO_CLEAR);
1027
1028         if ((irq_status & IRQSTATUS_SCSI) &&
1029             (irq_phase  & SCSI_RESET_IRQ)) {
1030                 nsp_msg(KERN_ERR, "bus reset (power off?)");
1031
1032                 nsphw_init(data);
1033                 nsp_bus_reset(data);
1034
1035                 if(data->CurrentSC != NULL) {
1036                         tmpSC = data->CurrentSC;
1037                         tmpSC->result  = (DID_RESET                   << 16) |
1038                                          ((tmpSC->SCp.Message & 0xff) <<  8) |
1039                                          ((tmpSC->SCp.Status  & 0xff) <<  0);
1040                         nsp_scsi_done(tmpSC);
1041                 }
1042                 return IRQ_HANDLED;
1043         }
1044
1045         if (data->CurrentSC == NULL) {
1046                 nsp_msg(KERN_ERR, "CurrentSC==NULL irq_status=0x%x phase=0x%x irq_phase=0x%x this can't be happen. reset everything", irq_status, phase, irq_phase);
1047                 nsphw_init(data);
1048                 nsp_bus_reset(data);
1049                 return IRQ_HANDLED;
1050         }
1051
1052         tmpSC    = data->CurrentSC;
1053         target   = tmpSC->device->id;
1054         lun      = tmpSC->device->lun;
1055         sync_neg = &(data->Sync[target].SyncNegotiation);
1056
1057         /*
1058          * parse hardware SCSI irq reasons register
1059          */
1060         if (irq_status & IRQSTATUS_SCSI) {
1061                 if (irq_phase & RESELECT_IRQ) {
1062                         nsp_dbg(NSP_DEBUG_INTR, "reselect");
1063                         nsp_write(base, IRQCONTROL, IRQCONTROL_RESELECT_CLEAR);
1064                         if (nsp_reselected(tmpSC) != FALSE) {
1065                                 return IRQ_HANDLED;
1066                         }
1067                 }
1068
1069                 if ((irq_phase & (PHASE_CHANGE_IRQ | LATCHED_BUS_FREE)) == 0) {
1070                         return IRQ_HANDLED;
1071                 }
1072         }
1073
1074         //show_phase(tmpSC);
1075
1076         switch(tmpSC->SCp.phase) {
1077         case PH_SELSTART:
1078                 // *sync_neg = SYNC_NOT_YET;
1079                 if ((phase & BUSMON_BSY) == 0) {
1080                         //nsp_dbg(NSP_DEBUG_INTR, "selection count=%d", data->SelectionTimeOut);
1081                         if (data->SelectionTimeOut >= NSP_SELTIMEOUT) {
1082                                 nsp_dbg(NSP_DEBUG_INTR, "selection time out");
1083                                 data->SelectionTimeOut = 0;
1084                                 nsp_index_write(base, SCSIBUSCTRL, 0);
1085
1086                                 tmpSC->result   = DID_TIME_OUT << 16;
1087                                 nsp_scsi_done(tmpSC);
1088
1089                                 return IRQ_HANDLED;
1090                         }
1091                         data->SelectionTimeOut += 1;
1092                         nsp_start_timer(tmpSC, 1000/51);
1093                         return IRQ_HANDLED;
1094                 }
1095
1096                 /* attention assert */
1097                 //nsp_dbg(NSP_DEBUG_INTR, "attention assert");
1098                 data->SelectionTimeOut = 0;
1099                 tmpSC->SCp.phase       = PH_SELECTED;
1100                 nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN);
1101                 udelay(1);
1102                 nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN | AUTODIRECTION | ACKENB);
1103                 return IRQ_HANDLED;
1104
1105                 break;
1106
1107         case PH_RESELECT:
1108                 //nsp_dbg(NSP_DEBUG_INTR, "phase reselect");
1109                 // *sync_neg = SYNC_NOT_YET;
1110                 if ((phase & BUSMON_PHASE_MASK) != BUSPHASE_MESSAGE_IN) {
1111
1112                         tmpSC->result   = DID_ABORT << 16;
1113                         nsp_scsi_done(tmpSC);
1114                         return IRQ_HANDLED;
1115                 }
1116                 /* fall thru */
1117         default:
1118                 if ((irq_status & (IRQSTATUS_SCSI | IRQSTATUS_FIFO)) == 0) {
1119                         return IRQ_HANDLED;
1120                 }
1121                 break;
1122         }
1123
1124         /*
1125          * SCSI sequencer
1126          */
1127         //nsp_dbg(NSP_DEBUG_INTR, "start scsi seq");
1128
1129         /* normal disconnect */
1130         if (((tmpSC->SCp.phase == PH_MSG_IN) || (tmpSC->SCp.phase == PH_MSG_OUT)) &&
1131             (irq_phase & LATCHED_BUS_FREE) != 0 ) {
1132                 nsp_dbg(NSP_DEBUG_INTR, "normal disconnect irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase);
1133
1134                 //*sync_neg       = SYNC_NOT_YET;
1135
1136                 if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) {     /* all command complete and return status */
1137                         tmpSC->result = (DID_OK                      << 16) |
1138                                         ((tmpSC->SCp.Message & 0xff) <<  8) |
1139                                         ((tmpSC->SCp.Status  & 0xff) <<  0);
1140                         nsp_dbg(NSP_DEBUG_INTR, "command complete result=0x%x", tmpSC->result);
1141                         nsp_scsi_done(tmpSC);
1142
1143                         return IRQ_HANDLED;
1144                 }
1145
1146                 return IRQ_HANDLED;
1147         }
1148
1149
1150         /* check unexpected bus free state */
1151         if (phase == 0) {
1152                 nsp_msg(KERN_DEBUG, "unexpected bus free. irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase);
1153
1154                 *sync_neg       = SYNC_NG;
1155                 tmpSC->result   = DID_ERROR << 16;
1156                 nsp_scsi_done(tmpSC);
1157                 return IRQ_HANDLED;
1158         }
1159
1160         switch (phase & BUSMON_PHASE_MASK) {
1161         case BUSPHASE_COMMAND:
1162                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_COMMAND");
1163                 if ((phase & BUSMON_REQ) == 0) {
1164                         nsp_dbg(NSP_DEBUG_INTR, "REQ == 0");
1165                         return IRQ_HANDLED;
1166                 }
1167
1168                 tmpSC->SCp.phase = PH_COMMAND;
1169
1170                 nsp_nexus(tmpSC);
1171
1172                 /* write scsi command */
1173                 nsp_dbg(NSP_DEBUG_INTR, "cmd_len=%d", tmpSC->cmd_len);
1174                 nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER);
1175                 for (i = 0; i < tmpSC->cmd_len; i++) {
1176                         nsp_index_write(base, COMMANDDATA, tmpSC->cmnd[i]);
1177                 }
1178                 nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER | AUTO_COMMAND_GO);
1179                 break;
1180
1181         case BUSPHASE_DATA_OUT:
1182                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_OUT");
1183
1184                 tmpSC->SCp.phase        = PH_DATA;
1185                 tmpSC->SCp.have_data_in = IO_OUT;
1186
1187                 nsp_pio_write(tmpSC);
1188
1189                 break;
1190
1191         case BUSPHASE_DATA_IN:
1192                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_IN");
1193
1194                 tmpSC->SCp.phase        = PH_DATA;
1195                 tmpSC->SCp.have_data_in = IO_IN;
1196
1197                 nsp_pio_read(tmpSC);
1198
1199                 break;
1200
1201         case BUSPHASE_STATUS:
1202                 nsp_dataphase_bypass(tmpSC);
1203                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_STATUS");
1204
1205                 tmpSC->SCp.phase = PH_STATUS;
1206
1207                 tmpSC->SCp.Status = nsp_index_read(base, SCSIDATAWITHACK);
1208                 nsp_dbg(NSP_DEBUG_INTR, "message=0x%x status=0x%x", tmpSC->SCp.Message, tmpSC->SCp.Status);
1209
1210                 break;
1211
1212         case BUSPHASE_MESSAGE_OUT:
1213                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_OUT");
1214                 if ((phase & BUSMON_REQ) == 0) {
1215                         goto timer_out;
1216                 }
1217
1218                 tmpSC->SCp.phase = PH_MSG_OUT;
1219
1220                 //*sync_neg = SYNC_NOT_YET;
1221
1222                 data->MsgLen = i = 0;
1223                 data->MsgBuffer[i] = IDENTIFY(TRUE, lun); i++;
1224
1225                 if (*sync_neg == SYNC_NOT_YET) {
1226                         data->Sync[target].SyncPeriod = 0;
1227                         data->Sync[target].SyncOffset = 0;
1228
1229                         /**/
1230                         data->MsgBuffer[i] = MSG_EXTENDED; i++;
1231                         data->MsgBuffer[i] = 3;            i++;
1232                         data->MsgBuffer[i] = MSG_EXT_SDTR; i++;
1233                         data->MsgBuffer[i] = 0x0c;         i++;
1234                         data->MsgBuffer[i] = 15;           i++;
1235                         /**/
1236                 }
1237                 data->MsgLen = i;
1238
1239                 nsp_analyze_sdtr(tmpSC);
1240                 show_message(data);
1241                 nsp_message_out(tmpSC);
1242                 break;
1243
1244         case BUSPHASE_MESSAGE_IN:
1245                 nsp_dataphase_bypass(tmpSC);
1246                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_IN");
1247                 if ((phase & BUSMON_REQ) == 0) {
1248                         goto timer_out;
1249                 }
1250
1251                 tmpSC->SCp.phase = PH_MSG_IN;
1252                 nsp_message_in(tmpSC);
1253
1254                 /**/
1255                 if (*sync_neg == SYNC_NOT_YET) {
1256                         //nsp_dbg(NSP_DEBUG_INTR, "sync target=%d,lun=%d",target,lun);
1257
1258                         if (data->MsgLen       >= 5            &&
1259                             data->MsgBuffer[0] == MSG_EXTENDED &&
1260                             data->MsgBuffer[1] == 3            &&
1261                             data->MsgBuffer[2] == MSG_EXT_SDTR ) {
1262                                 data->Sync[target].SyncPeriod = data->MsgBuffer[3];
1263                                 data->Sync[target].SyncOffset = data->MsgBuffer[4];
1264                                 //nsp_dbg(NSP_DEBUG_INTR, "sync ok, %d %d", data->MsgBuffer[3], data->MsgBuffer[4]);
1265                                 *sync_neg = SYNC_OK;
1266                         } else {
1267                                 data->Sync[target].SyncPeriod = 0;
1268                                 data->Sync[target].SyncOffset = 0;
1269                                 *sync_neg = SYNC_NG;
1270                         }
1271                         nsp_analyze_sdtr(tmpSC);
1272                 }
1273                 /**/
1274
1275                 /* search last messeage byte */
1276                 tmp = -1;
1277                 for (i = 0; i < data->MsgLen; i++) {
1278                         tmp = data->MsgBuffer[i];
1279                         if (data->MsgBuffer[i] == MSG_EXTENDED) {
1280                                 i += (1 + data->MsgBuffer[i+1]);
1281                         }
1282                 }
1283                 tmpSC->SCp.Message = tmp;
1284
1285                 nsp_dbg(NSP_DEBUG_INTR, "message=0x%x len=%d", tmpSC->SCp.Message, data->MsgLen);
1286                 show_message(data);
1287
1288                 break;
1289
1290         case BUSPHASE_SELECT:
1291         default:
1292                 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE other");
1293
1294                 break;
1295         }
1296
1297         //nsp_dbg(NSP_DEBUG_INTR, "out");
1298         return IRQ_HANDLED;
1299
1300 timer_out:
1301         nsp_start_timer(tmpSC, 1000/102);
1302         return IRQ_HANDLED;
1303 }
1304
1305 #ifdef NSP_DEBUG
1306 #include "nsp_debug.c"
1307 #endif  /* NSP_DEBUG */
1308
1309 /*----------------------------------------------------------------*/
1310 /* look for ninja3 card and init if found                         */
1311 /*----------------------------------------------------------------*/
1312 static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht)
1313 {
1314         struct Scsi_Host *host; /* registered host structure */
1315         nsp_hw_data *data_b = &nsp_data_base, *data;
1316
1317         nsp_dbg(NSP_DEBUG_INIT, "this_id=%d", sht->this_id);
1318         host = scsi_host_alloc(&nsp_driver_template, sizeof(nsp_hw_data));
1319         if (host == NULL) {
1320                 nsp_dbg(NSP_DEBUG_INIT, "host failed");
1321                 return NULL;
1322         }
1323
1324         memcpy(host->hostdata, data_b, sizeof(nsp_hw_data));
1325         data = (nsp_hw_data *)host->hostdata;
1326         data->ScsiInfo->host = host;
1327 #ifdef NSP_DEBUG
1328         data->CmdId = 0;
1329 #endif
1330
1331         nsp_dbg(NSP_DEBUG_INIT, "irq=%d,%d", data_b->IrqNumber, ((nsp_hw_data *)host->hostdata)->IrqNumber);
1332
1333         host->unique_id   = data->BaseAddress;
1334         host->io_port     = data->BaseAddress;
1335         host->n_io_port   = data->NumAddress;
1336         host->irq         = data->IrqNumber;
1337         host->base        = data->MmioAddress;
1338
1339         spin_lock_init(&(data->Lock));
1340
1341         snprintf(data->nspinfo,
1342                  sizeof(data->nspinfo),
1343                  "NinjaSCSI-3/32Bi Driver $Revision: 1.23 $ IO:0x%04lx-0x%04lx MMIO(virt addr):0x%04lx IRQ:%02d",
1344                  host->io_port, host->io_port + host->n_io_port - 1,
1345                  host->base,
1346                  host->irq);
1347         sht->name         = data->nspinfo;
1348
1349         nsp_dbg(NSP_DEBUG_INIT, "end");
1350
1351
1352         return host; /* detect done. */
1353 }
1354
1355 /*----------------------------------------------------------------*/
1356 /* return info string                                             */
1357 /*----------------------------------------------------------------*/
1358 static const char *nsp_info(struct Scsi_Host *shpnt)
1359 {
1360         nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata;
1361
1362         return data->nspinfo;
1363 }
1364
1365 #undef SPRINTF
1366 #define SPRINTF(args...) \
1367         do { \
1368                 if(length > (pos - buffer)) { \
1369                         pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \
1370                         nsp_dbg(NSP_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length,  length - (pos - buffer));\
1371                 } \
1372         } while(0)
1373
1374 static int nsp_proc_info(struct Scsi_Host *host, char *buffer, char **start,
1375                          off_t offset, int length, int inout)
1376 {
1377         int id;
1378         char *pos = buffer;
1379         int thislength;
1380         int speed;
1381         unsigned long flags;
1382         nsp_hw_data *data;
1383         int hostno;
1384
1385         if (inout) {
1386                 return -EINVAL;
1387         }
1388
1389         hostno = host->host_no;
1390         data = (nsp_hw_data *)host->hostdata;
1391
1392
1393         SPRINTF("NinjaSCSI status\n\n");
1394         SPRINTF("Driver version:        $Revision: 1.23 $\n");
1395         SPRINTF("SCSI host No.:         %d\n",          hostno);
1396         SPRINTF("IRQ:                   %d\n",          host->irq);
1397         SPRINTF("IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
1398         SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
1399         SPRINTF("sg_tablesize:          %d\n",          host->sg_tablesize);
1400
1401         SPRINTF("burst transfer mode:   ");
1402         switch (nsp_burst_mode) {
1403         case BURST_IO8:
1404                 SPRINTF("io8");
1405                 break;
1406         case BURST_IO32:
1407                 SPRINTF("io32");
1408                 break;
1409         case BURST_MEM32:
1410                 SPRINTF("mem32");
1411                 break;
1412         default:
1413                 SPRINTF("???");
1414                 break;
1415         }
1416         SPRINTF("\n");
1417
1418
1419         spin_lock_irqsave(&(data->Lock), flags);
1420         SPRINTF("CurrentSC:             0x%p\n\n",      data->CurrentSC);
1421         spin_unlock_irqrestore(&(data->Lock), flags);
1422
1423         SPRINTF("SDTR status\n");
1424         for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
1425
1426                 SPRINTF("id %d: ", id);
1427
1428                 if (id == host->this_id) {
1429                         SPRINTF("----- NinjaSCSI-3 host adapter\n");
1430                         continue;
1431                 }
1432
1433                 switch(data->Sync[id].SyncNegotiation) {
1434                 case SYNC_OK:
1435                         SPRINTF(" sync");
1436                         break;
1437                 case SYNC_NG:
1438                         SPRINTF("async");
1439                         break;
1440                 case SYNC_NOT_YET:
1441                         SPRINTF(" none");
1442                         break;
1443                 default:
1444                         SPRINTF("?????");
1445                         break;
1446                 }
1447
1448                 if (data->Sync[id].SyncPeriod != 0) {
1449                         speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
1450
1451                         SPRINTF(" transfer %d.%dMB/s, offset %d",
1452                                 speed / 1000,
1453                                 speed % 1000,
1454                                 data->Sync[id].SyncOffset
1455                                 );
1456                 }
1457                 SPRINTF("\n");
1458         }
1459
1460         thislength = pos - (buffer + offset);
1461
1462         if(thislength < 0) {
1463                 *start = NULL;
1464                 return 0;
1465         }
1466
1467
1468         thislength = min(thislength, length);
1469         *start = buffer + offset;
1470
1471         return thislength;
1472 }
1473 #undef SPRINTF
1474
1475 /*---------------------------------------------------------------*/
1476 /* error handler                                                 */
1477 /*---------------------------------------------------------------*/
1478
1479 /*
1480 static int nsp_eh_abort(struct scsi_cmnd *SCpnt)
1481 {
1482         nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
1483
1484         return nsp_eh_bus_reset(SCpnt);
1485 }*/
1486
1487 static int nsp_bus_reset(nsp_hw_data *data)
1488 {
1489         unsigned int base = data->BaseAddress;
1490         int          i;
1491
1492         nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK);
1493
1494         nsp_index_write(base, SCSIBUSCTRL, SCSI_RST);
1495         mdelay(100); /* 100ms */
1496         nsp_index_write(base, SCSIBUSCTRL, 0);
1497         for(i = 0; i < 5; i++) {
1498                 nsp_index_read(base, IRQPHASESENCE); /* dummy read */
1499         }
1500
1501         nsphw_init_sync(data);
1502
1503         nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR);
1504
1505         return SUCCESS;
1506 }
1507
1508 static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt)
1509 {
1510         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
1511
1512         nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
1513
1514         return nsp_bus_reset(data);
1515 }
1516
1517 static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
1518 {
1519         nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
1520
1521         nsp_dbg(NSP_DEBUG_BUSRESET, "in");
1522
1523         nsphw_init(data);
1524
1525         return SUCCESS;
1526 }
1527
1528
1529 /**********************************************************************
1530   PCMCIA functions
1531 **********************************************************************/
1532
1533 static int nsp_cs_probe(struct pcmcia_device *link)
1534 {
1535         scsi_info_t  *info;
1536         nsp_hw_data  *data = &nsp_data_base;
1537         int ret;
1538
1539         nsp_dbg(NSP_DEBUG_INIT, "in");
1540
1541         /* Create new SCSI device */
1542         info = kzalloc(sizeof(*info), GFP_KERNEL);
1543         if (info == NULL) { return -ENOMEM; }
1544         info->p_dev = link;
1545         link->priv = info;
1546         data->ScsiInfo = info;
1547
1548         nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
1549
1550         ret = nsp_cs_config(link);
1551
1552         nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
1553         return ret;
1554 } /* nsp_cs_attach */
1555
1556
1557 static void nsp_cs_detach(struct pcmcia_device *link)
1558 {
1559         nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link);
1560
1561         ((scsi_info_t *)link->priv)->stop = 1;
1562         nsp_cs_release(link);
1563
1564         kfree(link->priv);
1565         link->priv = NULL;
1566 } /* nsp_cs_detach */
1567
1568
1569 static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
1570 {
1571         nsp_hw_data             *data = priv_data;
1572
1573         if (p_dev->config_index == 0)
1574                 return -ENODEV;
1575
1576         /* This reserves IO space but doesn't actually enable it */
1577         if (pcmcia_request_io(p_dev) != 0)
1578                 goto next_entry;
1579
1580         if (resource_size(p_dev->resource[2])) {
1581                 p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 |
1582                                         WIN_MEMORY_TYPE_CM |
1583                                         WIN_ENABLE);
1584                 if (p_dev->resource[2]->end < 0x1000)
1585                         p_dev->resource[2]->end = 0x1000;
1586                 if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0)
1587                         goto next_entry;
1588                 if (pcmcia_map_mem_page(p_dev, p_dev->resource[2],
1589                                                 p_dev->card_addr) != 0)
1590                         goto next_entry;
1591
1592                 data->MmioAddress = (unsigned long)
1593                         ioremap_nocache(p_dev->resource[2]->start,
1594                                         resource_size(p_dev->resource[2]));
1595                 data->MmioLength  = resource_size(p_dev->resource[2]);
1596         }
1597         /* If we got this far, we're cool! */
1598         return 0;
1599
1600 next_entry:
1601         nsp_dbg(NSP_DEBUG_INIT, "next");
1602         pcmcia_disable_device(p_dev);
1603         return -ENODEV;
1604 }
1605
1606 static int nsp_cs_config(struct pcmcia_device *link)
1607 {
1608         int               ret;
1609         scsi_info_t      *info   = link->priv;
1610         struct Scsi_Host *host;
1611         nsp_hw_data      *data = &nsp_data_base;
1612
1613         nsp_dbg(NSP_DEBUG_INIT, "in");
1614
1615         link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
1616                 CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM |
1617                 CONF_AUTO_SET_IO;
1618
1619         ret = pcmcia_loop_config(link, nsp_cs_config_check, data);
1620         if (ret)
1621                 goto cs_failed;
1622
1623         if (pcmcia_request_irq(link, nspintr))
1624                 goto cs_failed;
1625
1626         ret = pcmcia_enable_device(link);
1627         if (ret)
1628                 goto cs_failed;
1629
1630         if (free_ports) {
1631                 if (link->resource[0]) {
1632                         release_region(link->resource[0]->start,
1633                                         resource_size(link->resource[0]));
1634                 }
1635                 if (link->resource[1]) {
1636                         release_region(link->resource[1]->start,
1637                                         resource_size(link->resource[1]));
1638                 }
1639         }
1640
1641         /* Set port and IRQ */
1642         data->BaseAddress = link->resource[0]->start;
1643         data->NumAddress  = resource_size(link->resource[0]);
1644         data->IrqNumber   = link->irq;
1645
1646         nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
1647                 data->BaseAddress, data->NumAddress, data->IrqNumber);
1648
1649         if(nsphw_init(data) == FALSE) {
1650                 goto cs_failed;
1651         }
1652
1653         host = nsp_detect(&nsp_driver_template);
1654
1655         if (host == NULL) {
1656                 nsp_dbg(NSP_DEBUG_INIT, "detect failed");
1657                 goto cs_failed;
1658         }
1659
1660
1661         ret = scsi_add_host (host, NULL);
1662         if (ret)
1663                 goto cs_failed;
1664
1665         scsi_scan_host(host);
1666
1667         info->host = host;
1668
1669         return 0;
1670
1671  cs_failed:
1672         nsp_dbg(NSP_DEBUG_INIT, "config fail");
1673         nsp_cs_release(link);
1674
1675         return -ENODEV;
1676 } /* nsp_cs_config */
1677
1678
1679 static void nsp_cs_release(struct pcmcia_device *link)
1680 {
1681         scsi_info_t *info = link->priv;
1682         nsp_hw_data *data = NULL;
1683
1684         if (info->host == NULL) {
1685                 nsp_msg(KERN_DEBUG, "unexpected card release call.");
1686         } else {
1687                 data = (nsp_hw_data *)info->host->hostdata;
1688         }
1689
1690         nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
1691
1692         /* Unlink the device chain */
1693         if (info->host != NULL) {
1694                 scsi_remove_host(info->host);
1695         }
1696
1697         if (resource_size(link->resource[2])) {
1698                 if (data != NULL) {
1699                         iounmap((void *)(data->MmioAddress));
1700                 }
1701         }
1702         pcmcia_disable_device(link);
1703
1704         if (info->host != NULL) {
1705                 scsi_host_put(info->host);
1706         }
1707 } /* nsp_cs_release */
1708
1709 static int nsp_cs_suspend(struct pcmcia_device *link)
1710 {
1711         scsi_info_t *info = link->priv;
1712         nsp_hw_data *data;
1713
1714         nsp_dbg(NSP_DEBUG_INIT, "event: suspend");
1715
1716         if (info->host != NULL) {
1717                 nsp_msg(KERN_INFO, "clear SDTR status");
1718
1719                 data = (nsp_hw_data *)info->host->hostdata;
1720
1721                 nsphw_init_sync(data);
1722         }
1723
1724         info->stop = 1;
1725
1726         return 0;
1727 }
1728
1729 static int nsp_cs_resume(struct pcmcia_device *link)
1730 {
1731         scsi_info_t *info = link->priv;
1732         nsp_hw_data *data;
1733
1734         nsp_dbg(NSP_DEBUG_INIT, "event: resume");
1735
1736         info->stop = 0;
1737
1738         if (info->host != NULL) {
1739                 nsp_msg(KERN_INFO, "reset host and bus");
1740
1741                 data = (nsp_hw_data *)info->host->hostdata;
1742
1743                 nsphw_init   (data);
1744                 nsp_bus_reset(data);
1745         }
1746
1747         return 0;
1748 }
1749
1750 /*======================================================================*
1751  *      module entry point
1752  *====================================================================*/
1753 static struct pcmcia_device_id nsp_cs_ids[] = {
1754         PCMCIA_DEVICE_PROD_ID123("IO DATA", "CBSC16       ", "1", 0x547e66dc, 0x0d63a3fd, 0x51de003a),
1755         PCMCIA_DEVICE_PROD_ID123("KME    ", "SCSI-CARD-001", "1", 0x534c02bc, 0x52008408, 0x51de003a),
1756         PCMCIA_DEVICE_PROD_ID123("KME    ", "SCSI-CARD-002", "1", 0x534c02bc, 0xcb09d5b2, 0x51de003a),
1757         PCMCIA_DEVICE_PROD_ID123("KME    ", "SCSI-CARD-003", "1", 0x534c02bc, 0xbc0ee524, 0x51de003a),
1758         PCMCIA_DEVICE_PROD_ID123("KME    ", "SCSI-CARD-004", "1", 0x534c02bc, 0x226a7087, 0x51de003a),
1759         PCMCIA_DEVICE_PROD_ID123("WBT", "NinjaSCSI-3", "R1.0", 0xc7ba805f, 0xfdc7c97d, 0x6973710e),
1760         PCMCIA_DEVICE_PROD_ID123("WORKBIT", "UltraNinja-16", "1", 0x28191418, 0xb70f4b09, 0x51de003a),
1761         PCMCIA_DEVICE_NULL
1762 };
1763 MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids);
1764
1765 static struct pcmcia_driver nsp_driver = {
1766         .owner          = THIS_MODULE,
1767         .name           = "nsp_cs",
1768         .probe          = nsp_cs_probe,
1769         .remove         = nsp_cs_detach,
1770         .id_table       = nsp_cs_ids,
1771         .suspend        = nsp_cs_suspend,
1772         .resume         = nsp_cs_resume,
1773 };
1774
1775 static int __init nsp_cs_init(void)
1776 {
1777         return pcmcia_register_driver(&nsp_driver);
1778 }
1779
1780 static void __exit nsp_cs_exit(void)
1781 {
1782         pcmcia_unregister_driver(&nsp_driver);
1783 }
1784
1785
1786 module_init(nsp_cs_init)
1787 module_exit(nsp_cs_exit)
1788
1789 /* end */