drivers/scsi/megaraid/megaraid_mbox.c

   1 /*
   2  *
   3  *                      Linux MegaRAID device driver
   4  *
   5  * Copyright (c) 2003-2004  LSI Logic Corporation.
   6  *
   7  *         This program is free software; you can redistribute it and/or
   8  *         modify it under the terms of the GNU General Public License
   9  *         as published by the Free Software Foundation; either version
  10  *         2 of the License, or (at your option) any later version.
  11  *
  12  * FILE         : megaraid_mbox.c
  13  * Version      : v2.20.5.1 (Nov 16 2006)
  14  *
  15  * Authors:
  16  *      Atul Mukker             <Atul.Mukker@lsi.com>
  17  *      Sreenivas Bagalkote     <Sreenivas.Bagalkote@lsi.com>
  18  *      Manoj Jose              <Manoj.Jose@lsi.com>
  19  *      Seokmann Ju
  20  *
  21  * List of supported controllers
  22  *
  23  * OEM  Product Name                    VID     DID     SSVID   SSID
  24  * ---  ------------                    ---     ---     ----    ----
  25  * Dell PERC3/QC                        101E    1960    1028    0471
  26  * Dell PERC3/DC                        101E    1960    1028    0493
  27  * Dell PERC3/SC                        101E    1960    1028    0475
  28  * Dell PERC3/Di                        1028    1960    1028    0123
  29  * Dell PERC4/SC                        1000    1960    1028    0520
  30  * Dell PERC4/DC                        1000    1960    1028    0518
  31  * Dell PERC4/QC                        1000    0407    1028    0531
  32  * Dell PERC4/Di                        1028    000F    1028    014A
  33  * Dell PERC 4e/Si                      1028    0013    1028    016c
  34  * Dell PERC 4e/Di                      1028    0013    1028    016d
  35  * Dell PERC 4e/Di                      1028    0013    1028    016e
  36  * Dell PERC 4e/Di                      1028    0013    1028    016f
  37  * Dell PERC 4e/Di                      1028    0013    1028    0170
  38  * Dell PERC 4e/DC                      1000    0408    1028    0002
  39  * Dell PERC 4e/SC                      1000    0408    1028    0001
  40  *
  41  *
  42  * LSI MegaRAID SCSI 320-0              1000    1960    1000    A520
  43  * LSI MegaRAID SCSI 320-1              1000    1960    1000    0520
  44  * LSI MegaRAID SCSI 320-2              1000    1960    1000    0518
  45  * LSI MegaRAID SCSI 320-0X             1000    0407    1000    0530
  46  * LSI MegaRAID SCSI 320-2X             1000    0407    1000    0532
  47  * LSI MegaRAID SCSI 320-4X             1000    0407    1000    0531
  48  * LSI MegaRAID SCSI 320-1E             1000    0408    1000    0001
  49  * LSI MegaRAID SCSI 320-2E             1000    0408    1000    0002
  50  * LSI MegaRAID SATA 150-4              1000    1960    1000    4523
  51  * LSI MegaRAID SATA 150-6              1000    1960    1000    0523
  52  * LSI MegaRAID SATA 300-4X             1000    0409    1000    3004
  53  * LSI MegaRAID SATA 300-8X             1000    0409    1000    3008
  54  *
  55  * INTEL RAID Controller SRCU42X        1000    0407    8086    0532
  56  * INTEL RAID Controller SRCS16         1000    1960    8086    0523
  57  * INTEL RAID Controller SRCU42E        1000    0408    8086    0002
  58  * INTEL RAID Controller SRCZCRX        1000    0407    8086    0530
  59  * INTEL RAID Controller SRCS28X        1000    0409    8086    3008
  60  * INTEL RAID Controller SROMBU42E      1000    0408    8086    3431
  61  * INTEL RAID Controller SROMBU42E      1000    0408    8086    3499
  62  * INTEL RAID Controller SRCU51L        1000    1960    8086    0520
  63  *
  64  * FSC  MegaRAID PCI Express ROMB       1000    0408    1734    1065
  65  *
  66  * ACER MegaRAID ROMB-2E                1000    0408    1025    004D
  67  *
  68  * NEC  MegaRAID PCI Express ROMB       1000    0408    1033    8287
  69  *
  70  * For history of changes, see Documentation/ChangeLog.megaraid
  71  */
  72
  73 #include "megaraid_mbox.h"
  74
  75 static int megaraid_init(void);
  76 static void megaraid_exit(void);
  77
  78 static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *);
  79 static void megaraid_detach_one(struct pci_dev *);
  80 static void megaraid_mbox_shutdown(struct pci_dev *);
  81
  82 static int megaraid_io_attach(adapter_t *);
  83 static void megaraid_io_detach(adapter_t *);
  84
  85 static int megaraid_init_mbox(adapter_t *);
  86 static void megaraid_fini_mbox(adapter_t *);
  87
  88 static int megaraid_alloc_cmd_packets(adapter_t *);
  89 static void megaraid_free_cmd_packets(adapter_t *);
  90
  91 static int megaraid_mbox_setup_dma_pools(adapter_t *);
  92 static void megaraid_mbox_teardown_dma_pools(adapter_t *);
  93
  94 static int megaraid_sysfs_alloc_resources(adapter_t *);
  95 static void megaraid_sysfs_free_resources(adapter_t *);
  96
  97 static int megaraid_abort_handler(struct scsi_cmnd *);
  98 static int megaraid_reset_handler(struct scsi_cmnd *);
  99
 100 static int mbox_post_sync_cmd(adapter_t *, uint8_t []);
 101 static int mbox_post_sync_cmd_fast(adapter_t *, uint8_t []);
 102 static int megaraid_busywait_mbox(mraid_device_t *);
 103 static int megaraid_mbox_product_info(adapter_t *);
 104 static int megaraid_mbox_extended_cdb(adapter_t *);
 105 static int megaraid_mbox_support_ha(adapter_t *, uint16_t *);
 106 static int megaraid_mbox_support_random_del(adapter_t *);
 107 static int megaraid_mbox_get_max_sg(adapter_t *);
 108 static void megaraid_mbox_enum_raid_scsi(adapter_t *);
 109 static void megaraid_mbox_flush_cache(adapter_t *);
 110 static int megaraid_mbox_fire_sync_cmd(adapter_t *);
 111
 112 static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
 113 static void megaraid_mbox_setup_device_map(adapter_t *);
 114
 115 static int megaraid_queue_command(struct scsi_cmnd *,
 116                 void (*)(struct scsi_cmnd *));
 117 static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
 118 static void megaraid_mbox_runpendq(adapter_t *, scb_t *);
 119 static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *,
 120                 struct scsi_cmnd *);
 121 static void megaraid_mbox_prepare_epthru(adapter_t *, scb_t *,
 122                 struct scsi_cmnd *);
 123
 124 static irqreturn_t megaraid_isr(int, void *);
 125
 126 static void megaraid_mbox_dpc(unsigned long);
 127
 128 static ssize_t megaraid_sysfs_show_app_hndl(struct device *, struct device_attribute *attr, char *);
 129 static ssize_t megaraid_sysfs_show_ldnum(struct device *, struct device_attribute *attr, char *);
 130
 131 static int megaraid_cmm_register(adapter_t *);
 132 static int megaraid_cmm_unregister(adapter_t *);
 133 static int megaraid_mbox_mm_handler(unsigned long, uioc_t *, uint32_t);
 134 static int megaraid_mbox_mm_command(adapter_t *, uioc_t *);
 135 static void megaraid_mbox_mm_done(adapter_t *, scb_t *);
 136 static int gather_hbainfo(adapter_t *, mraid_hba_info_t *);
 137 static int wait_till_fw_empty(adapter_t *);
 138
 139
 140
 141 MODULE_AUTHOR("megaraidlinux@lsi.com");
 142 MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
 143 MODULE_LICENSE("GPL");
 144 MODULE_VERSION(MEGARAID_VERSION);
 145
 146 /*
 147  * ### modules parameters for driver ###
 148  */
 149
 150 /*
 151  * Set to enable driver to expose unconfigured disk to kernel
 152  */
 153 static int megaraid_expose_unconf_disks = 0;
 154 module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0);
 155 MODULE_PARM_DESC(unconf_disks,
 156         "Set to expose unconfigured disks to kernel (default=0)");
 157
 158 /*
 159  * driver wait time if the adapter's mailbox is busy
 160  */
 161 static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT;
 162 module_param_named(busy_wait, max_mbox_busy_wait, int, 0);
 163 MODULE_PARM_DESC(busy_wait,
 164         "Max wait for mailbox in microseconds if busy (default=10)");
 165
 166 /*
 167  * number of sectors per IO command
 168  */
 169 static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS;
 170 module_param_named(max_sectors, megaraid_max_sectors, int, 0);
 171 MODULE_PARM_DESC(max_sectors,
 172         "Maximum number of sectors per IO command (default=128)");
 173
 174 /*
 175  * number of commands per logical unit
 176  */
 177 static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN;
 178 module_param_named(cmd_per_lun, megaraid_cmd_per_lun, int, 0);
 179 MODULE_PARM_DESC(cmd_per_lun,
 180         "Maximum number of commands per logical unit (default=64)");
 181
 182
 183 /*
 184  * Fast driver load option, skip scanning for physical devices during load.
 185  * This would result in non-disk devices being skipped during driver load
 186  * time. These can be later added though, using /proc/scsi/scsi
 187  */
 188 static unsigned int megaraid_fast_load = 0;
 189 module_param_named(fast_load, megaraid_fast_load, int, 0);
 190 MODULE_PARM_DESC(fast_load,
 191         "Faster loading of the driver, skips physical devices! (default=0)");
 192
 193
 194 /*
 195  * mraid_debug level - threshold for amount of information to be displayed by
 196  * the driver. This level can be changed through modules parameters, ioctl or
 197  * sysfs/proc interface. By default, print the announcement messages only.
 198  */
 199 int mraid_debug_level = CL_ANN;
 200 module_param_named(debug_level, mraid_debug_level, int, 0);
 201 MODULE_PARM_DESC(debug_level, "Debug level for driver (default=0)");
 202
 203 /*
 204  * ### global data ###
 205  */
 206 static uint8_t megaraid_mbox_version[8] =
 207         { 0x02, 0x20, 0x04, 0x06, 3, 7, 20, 5 };
 208
 209
 210 /*
 211  * PCI table for all supported controllers.
 212  */
 213 static struct pci_device_id pci_id_table_g[] =  {
 214         {
 215                 PCI_VENDOR_ID_DELL,
 216                 PCI_DEVICE_ID_PERC4_DI_DISCOVERY,
 217                 PCI_VENDOR_ID_DELL,
 218                 PCI_SUBSYS_ID_PERC4_DI_DISCOVERY,
 219         },
 220         {
 221                 PCI_VENDOR_ID_LSI_LOGIC,
 222                 PCI_DEVICE_ID_PERC4_SC,
 223                 PCI_VENDOR_ID_DELL,
 224                 PCI_SUBSYS_ID_PERC4_SC,
 225         },
 226         {
 227                 PCI_VENDOR_ID_LSI_LOGIC,
 228                 PCI_DEVICE_ID_PERC4_DC,
 229                 PCI_VENDOR_ID_DELL,
 230                 PCI_SUBSYS_ID_PERC4_DC,
 231         },
 232         {
 233                 PCI_VENDOR_ID_LSI_LOGIC,
 234                 PCI_DEVICE_ID_VERDE,
 235                 PCI_ANY_ID,
 236                 PCI_ANY_ID,
 237         },
 238         {
 239                 PCI_VENDOR_ID_DELL,
 240                 PCI_DEVICE_ID_PERC4_DI_EVERGLADES,
 241                 PCI_VENDOR_ID_DELL,
 242                 PCI_SUBSYS_ID_PERC4_DI_EVERGLADES,
 243         },
 244         {
 245                 PCI_VENDOR_ID_DELL,
 246                 PCI_DEVICE_ID_PERC4E_SI_BIGBEND,
 247                 PCI_VENDOR_ID_DELL,
 248                 PCI_SUBSYS_ID_PERC4E_SI_BIGBEND,
 249         },
 250         {
 251                 PCI_VENDOR_ID_DELL,
 252                 PCI_DEVICE_ID_PERC4E_DI_KOBUK,
 253                 PCI_VENDOR_ID_DELL,
 254                 PCI_SUBSYS_ID_PERC4E_DI_KOBUK,
 255         },
 256         {
 257                 PCI_VENDOR_ID_DELL,
 258                 PCI_DEVICE_ID_PERC4E_DI_CORVETTE,
 259                 PCI_VENDOR_ID_DELL,
 260                 PCI_SUBSYS_ID_PERC4E_DI_CORVETTE,
 261         },
 262         {
 263                 PCI_VENDOR_ID_DELL,
 264                 PCI_DEVICE_ID_PERC4E_DI_EXPEDITION,
 265                 PCI_VENDOR_ID_DELL,
 266                 PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION,
 267         },
 268         {
 269                 PCI_VENDOR_ID_DELL,
 270                 PCI_DEVICE_ID_PERC4E_DI_GUADALUPE,
 271                 PCI_VENDOR_ID_DELL,
 272                 PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE,
 273         },
 274         {
 275                 PCI_VENDOR_ID_LSI_LOGIC,
 276                 PCI_DEVICE_ID_DOBSON,
 277                 PCI_ANY_ID,
 278                 PCI_ANY_ID,
 279         },
 280         {
 281                 PCI_VENDOR_ID_AMI,
 282                 PCI_DEVICE_ID_AMI_MEGARAID3,
 283                 PCI_ANY_ID,
 284                 PCI_ANY_ID,
 285         },
 286         {
 287                 PCI_VENDOR_ID_LSI_LOGIC,
 288                 PCI_DEVICE_ID_AMI_MEGARAID3,
 289                 PCI_ANY_ID,
 290                 PCI_ANY_ID,
 291         },
 292         {
 293                 PCI_VENDOR_ID_LSI_LOGIC,
 294                 PCI_DEVICE_ID_LINDSAY,
 295                 PCI_ANY_ID,
 296                 PCI_ANY_ID,
 297         },
 298         {0}     /* Terminating entry */
 299 };
 300 MODULE_DEVICE_TABLE(pci, pci_id_table_g);
 301
 302
 303 static struct pci_driver megaraid_pci_driver = {
 304         .name           = "megaraid",
 305         .id_table       = pci_id_table_g,
 306         .probe          = megaraid_probe_one,
 307         .remove         = __devexit_p(megaraid_detach_one),
 308         .shutdown       = megaraid_mbox_shutdown,
 309 };
 310
 311
 312
 313 // definitions for the device attributes for exporting logical drive number
 314 // for a scsi address (Host, Channel, Id, Lun)
 315
 316 DEVICE_ATTR(megaraid_mbox_app_hndl, S_IRUSR, megaraid_sysfs_show_app_hndl,
 317                 NULL);
 318
 319 // Host template initializer for megaraid mbox sysfs device attributes
 320 static struct device_attribute *megaraid_shost_attrs[] = {
 321         &dev_attr_megaraid_mbox_app_hndl,
 322         NULL,
 323 };
 324
 325
 326 DEVICE_ATTR(megaraid_mbox_ld, S_IRUSR, megaraid_sysfs_show_ldnum, NULL);
 327
 328 // Host template initializer for megaraid mbox sysfs device attributes
 329 static struct device_attribute *megaraid_sdev_attrs[] = {
 330         &dev_attr_megaraid_mbox_ld,
 331         NULL,
 332 };
 333
 334 /**
 335  * megaraid_change_queue_depth - Change the device's queue depth
 336  * @sdev:       scsi device struct
 337  * @qdepth:     depth to set
 338  * @reason:     calling context
 339  *
 340  * Return value:
 341  *      actual depth set
 342  */
 343 static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth,
 344                                        int reason)
 345 {
 346         if (reason != SCSI_QDEPTH_DEFAULT)
 347                 return -EOPNOTSUPP;
 348
 349         if (qdepth > MBOX_MAX_SCSI_CMDS)
 350                 qdepth = MBOX_MAX_SCSI_CMDS;
 351         scsi_adjust_queue_depth(sdev, 0, qdepth);
 352         return sdev->queue_depth;
 353 }
 354
 355 /*
 356  * Scsi host template for megaraid unified driver
 357  */
 358 static struct scsi_host_template megaraid_template_g = {
 359         .module                         = THIS_MODULE,
 360         .name                           = "LSI Logic MegaRAID driver",
 361         .proc_name                      = "megaraid",
 362         .queuecommand                   = megaraid_queue_command,
 363         .eh_abort_handler               = megaraid_abort_handler,
 364         .eh_device_reset_handler        = megaraid_reset_handler,
 365         .eh_bus_reset_handler           = megaraid_reset_handler,
 366         .eh_host_reset_handler          = megaraid_reset_handler,
 367         .change_queue_depth             = megaraid_change_queue_depth,
 368         .use_clustering                 = ENABLE_CLUSTERING,
 369         .sdev_attrs                     = megaraid_sdev_attrs,
 370         .shost_attrs                    = megaraid_shost_attrs,
 371 };
 372
 373
 374 /**
 375  * megaraid_init - module load hook
 376  *
 377  * We register ourselves as hotplug enabled module and let PCI subsystem
 378  * discover our adapters.
 379  */
 380 static int __init
 381 megaraid_init(void)
 382 {
 383         int     rval;
 384
 385         // Announce the driver version
 386         con_log(CL_ANN, (KERN_INFO "megaraid: %s %s\n", MEGARAID_VERSION,
 387                 MEGARAID_EXT_VERSION));
 388
 389         // check validity of module parameters
 390         if (megaraid_cmd_per_lun > MBOX_MAX_SCSI_CMDS) {
 391
 392                 con_log(CL_ANN, (KERN_WARNING
 393                         "megaraid mailbox: max commands per lun reset to %d\n",
 394                         MBOX_MAX_SCSI_CMDS));
 395
 396                 megaraid_cmd_per_lun = MBOX_MAX_SCSI_CMDS;
 397         }
 398
 399
 400         // register as a PCI hot-plug driver module
 401         rval = pci_register_driver(&megaraid_pci_driver);
 402         if (rval < 0) {
 403                 con_log(CL_ANN, (KERN_WARNING
 404                         "megaraid: could not register hotplug support.\n"));
 405         }
 406
 407         return rval;
 408 }
 409
 410
 411 /**
 412  * megaraid_exit - driver unload entry point
 413  *
 414  * We simply unwrap the megaraid_init routine here.
 415  */
 416 static void __exit
 417 megaraid_exit(void)
 418 {
 419         con_log(CL_DLEVEL1, (KERN_NOTICE "megaraid: unloading framework\n"));
 420
 421         // unregister as PCI hotplug driver
 422         pci_unregister_driver(&megaraid_pci_driver);
 423
 424         return;
 425 }
 426
 427
 428 /**
 429  * megaraid_probe_one - PCI hotplug entry point
 430  * @pdev        : handle to this controller's PCI configuration space
 431  * @id          : pci device id of the class of controllers
 432  *
 433  * This routine should be called whenever a new adapter is detected by the
 434  * PCI hotplug susbsystem.
 435  */
 436 static int __devinit
 437 megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 438 {
 439         adapter_t       *adapter;
 440
 441
 442         // detected a new controller
 443         con_log(CL_ANN, (KERN_INFO
 444                 "megaraid: probe new device %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
 445                 pdev->vendor, pdev->device, pdev->subsystem_vendor,
 446                 pdev->subsystem_device));
 447
 448         con_log(CL_ANN, ("bus %d:slot %d:func %d\n", pdev->bus->number,
 449                 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)));
 450
 451         if (pci_enable_device(pdev)) {
 452                 con_log(CL_ANN, (KERN_WARNING
 453                                 "megaraid: pci_enable_device failed\n"));
 454
 455                 return -ENODEV;
 456         }
 457
 458         // Enable bus-mastering on this controller
 459         pci_set_master(pdev);
 460
 461         // Allocate the per driver initialization structure
 462         adapter = kzalloc(sizeof(adapter_t), GFP_KERNEL);
 463
 464         if (adapter == NULL) {
 465                 con_log(CL_ANN, (KERN_WARNING
 466                 "megaraid: out of memory, %s %d.\n", __func__, __LINE__));
 467
 468                 goto out_probe_one;
 469         }
 470
 471
 472         // set up PCI related soft state and other pre-known parameters
 473         adapter->unique_id      = pdev->bus->number << 8 | pdev->devfn;
 474         adapter->irq            = pdev->irq;
 475         adapter->pdev           = pdev;
 476
 477         atomic_set(&adapter->being_detached, 0);
 478
 479         // Setup the default DMA mask. This would be changed later on
 480         // depending on hardware capabilities
 481         if (pci_set_dma_mask(adapter->pdev, DMA_BIT_MASK(32)) != 0) {
 482
 483                 con_log(CL_ANN, (KERN_WARNING
 484                         "megaraid: pci_set_dma_mask failed:%d\n", __LINE__));
 485
 486                 goto out_free_adapter;
 487         }
 488
 489
 490         // Initialize the synchronization lock for kernel and LLD
 491         spin_lock_init(&adapter->lock);
 492
 493         // Initialize the command queues: the list of free SCBs and the list
 494         // of pending SCBs.
 495         INIT_LIST_HEAD(&adapter->kscb_pool);
 496         spin_lock_init(SCSI_FREE_LIST_LOCK(adapter));
 497
 498         INIT_LIST_HEAD(&adapter->pend_list);
 499         spin_lock_init(PENDING_LIST_LOCK(adapter));
 500
 501         INIT_LIST_HEAD(&adapter->completed_list);
 502         spin_lock_init(COMPLETED_LIST_LOCK(adapter));
 503
 504
 505         // Start the mailbox based controller
 506         if (megaraid_init_mbox(adapter) != 0) {
 507                 con_log(CL_ANN, (KERN_WARNING
 508                         "megaraid: maibox adapter did not initialize\n"));
 509
 510                 goto out_free_adapter;
 511         }
 512
 513         // Register with LSI Common Management Module
 514         if (megaraid_cmm_register(adapter) != 0) {
 515
 516                 con_log(CL_ANN, (KERN_WARNING
 517                 "megaraid: could not register with management module\n"));
 518
 519                 goto out_fini_mbox;
 520         }
 521
 522         // setup adapter handle in PCI soft state
 523         pci_set_drvdata(pdev, adapter);
 524
 525         // attach with scsi mid-layer
 526         if (megaraid_io_attach(adapter) != 0) {
 527
 528                 con_log(CL_ANN, (KERN_WARNING "megaraid: io attach failed\n"));
 529
 530                 goto out_cmm_unreg;
 531         }
 532
 533         return 0;
 534
 535 out_cmm_unreg:
 536         pci_set_drvdata(pdev, NULL);
 537         megaraid_cmm_unregister(adapter);
 538 out_fini_mbox:
 539         megaraid_fini_mbox(adapter);
 540 out_free_adapter:
 541         kfree(adapter);
 542 out_probe_one:
 543         pci_disable_device(pdev);
 544
 545         return -ENODEV;
 546 }
 547
 548
 549 /**
 550  * megaraid_detach_one - release framework resources and call LLD release routine
 551  * @pdev        : handle for our PCI cofiguration space
 552  *
 553  * This routine is called during driver unload. We free all the allocated
 554  * resources and call the corresponding LLD so that it can also release all
 555  * its resources.
 556  *
 557  * This routine is also called from the PCI hotplug system.
 558  */
 559 static void
 560 megaraid_detach_one(struct pci_dev *pdev)
 561 {
 562         adapter_t               *adapter;
 563         struct Scsi_Host        *host;
 564
 565
 566         // Start a rollback on this adapter
 567         adapter = pci_get_drvdata(pdev);
 568
 569         if (!adapter) {
 570                 con_log(CL_ANN, (KERN_CRIT
 571                 "megaraid: Invalid detach on %#4.04x:%#4.04x:%#4.04x:%#4.04x\n",
 572                         pdev->vendor, pdev->device, pdev->subsystem_vendor,
 573                         pdev->subsystem_device));
 574
 575                 return;
 576         }
 577         else {
 578                 con_log(CL_ANN, (KERN_NOTICE
 579                 "megaraid: detaching device %#4.04x:%#4.04x:%#4.04x:%#4.04x\n",
 580                         pdev->vendor, pdev->device, pdev->subsystem_vendor,
 581                         pdev->subsystem_device));
 582         }
 583
 584
 585         host = adapter->host;
 586
 587         // do not allow any more requests from the management module for this
 588         // adapter.
 589         // FIXME: How do we account for the request which might still be
 590         // pending with us?
 591         atomic_set(&adapter->being_detached, 1);
 592
 593         // detach from the IO sub-system
 594         megaraid_io_detach(adapter);
 595
 596         // reset the device state in the PCI structure. We check this
 597         // condition when we enter here. If the device state is NULL,
 598         // that would mean the device has already been removed
 599         pci_set_drvdata(pdev, NULL);
 600
 601         // Unregister from common management module
 602         //
 603         // FIXME: this must return success or failure for conditions if there
 604         // is a command pending with LLD or not.
 605         megaraid_cmm_unregister(adapter);
 606
 607         // finalize the mailbox based controller and release all resources
 608         megaraid_fini_mbox(adapter);
 609
 610         kfree(adapter);
 611
 612         scsi_host_put(host);
 613
 614         pci_disable_device(pdev);
 615
 616         return;
 617 }
 618
 619
 620 /**
 621  * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA
 622  * @pdev                : generic driver model device
 623  *
 624  * Shutdown notification, perform flush cache.
 625  */
 626 static void
 627 megaraid_mbox_shutdown(struct pci_dev *pdev)
 628 {
 629         adapter_t               *adapter = pci_get_drvdata(pdev);
 630         static int              counter;
 631
 632         if (!adapter) {
 633                 con_log(CL_ANN, (KERN_WARNING
 634                         "megaraid: null device in shutdown\n"));
 635                 return;
 636         }
 637
 638         // flush caches now
 639         con_log(CL_ANN, (KERN_INFO "megaraid: flushing adapter %d...",
 640                 counter++));
 641
 642         megaraid_mbox_flush_cache(adapter);
 643
 644         con_log(CL_ANN, ("done\n"));
 645 }
 646
 647
 648 /**
 649  * megaraid_io_attach - attach a device with the IO subsystem
 650  * @adapter             : controller's soft state
 651  *
 652  * Attach this device with the IO subsystem.
 653  */
 654 static int
 655 megaraid_io_attach(adapter_t *adapter)
 656 {
 657         struct Scsi_Host        *host;
 658
 659         // Initialize SCSI Host structure
 660         host = scsi_host_alloc(&megaraid_template_g, 8);
 661         if (!host) {
 662                 con_log(CL_ANN, (KERN_WARNING
 663                         "megaraid mbox: scsi_register failed\n"));
 664
 665                 return -1;
 666         }
 667
 668         SCSIHOST2ADAP(host)     = (caddr_t)adapter;
 669         adapter->host           = host;
 670
 671         host->irq               = adapter->irq;
 672         host->unique_id         = adapter->unique_id;
 673         host->can_queue         = adapter->max_cmds;
 674         host->this_id           = adapter->init_id;
 675         host->sg_tablesize      = adapter->sglen;
 676         host->max_sectors       = adapter->max_sectors;
 677         host->cmd_per_lun       = adapter->cmd_per_lun;
 678         host->max_channel       = adapter->max_channel;
 679         host->max_id            = adapter->max_target;
 680         host->max_lun           = adapter->max_lun;
 681
 682
 683         // notify mid-layer about the new controller
 684         if (scsi_add_host(host, &adapter->pdev->dev)) {
 685
 686                 con_log(CL_ANN, (KERN_WARNING
 687                         "megaraid mbox: scsi_add_host failed\n"));
 688
 689                 scsi_host_put(host);
 690
 691                 return -1;
 692         }
 693
 694         scsi_scan_host(host);
 695
 696         return 0;
 697 }
 698
 699
 700 /**
 701  * megaraid_io_detach - detach a device from the IO subsystem
 702  * @adapter             : controller's soft state
 703  *
 704  * Detach this device from the IO subsystem.
 705  */
 706 static void
 707 megaraid_io_detach(adapter_t *adapter)
 708 {
 709         struct Scsi_Host        *host;
 710
 711         con_log(CL_DLEVEL1, (KERN_INFO "megaraid: io detach\n"));
 712
 713         host = adapter->host;
 714
 715         scsi_remove_host(host);
 716
 717         return;
 718 }
 719
 720
 721 /*
 722  * START: Mailbox Low Level Driver
 723  *
 724  * This is section specific to the single mailbox based controllers
 725  */
 726
 727 /**
 728  * megaraid_init_mbox - initialize controller
 729  * @adapter             : our soft state
 730  *
 731  * - Allocate 16-byte aligned mailbox memory for firmware handshake
 732  * - Allocate controller's memory resources
 733  * - Find out all initialization data
 734  * - Allocate memory required for all the commands
 735  * - Use internal library of FW routines, build up complete soft state
 736  */
 737 static int __devinit
 738 megaraid_init_mbox(adapter_t *adapter)
 739 {
 740         struct pci_dev          *pdev;
 741         mraid_device_t          *raid_dev;
 742         int                     i;
 743         uint32_t                magic64;
 744
 745
 746         adapter->ito    = MBOX_TIMEOUT;
 747         pdev            = adapter->pdev;
 748
 749         /*
 750          * Allocate and initialize the init data structure for mailbox
 751          * controllers
 752          */
 753         raid_dev = kzalloc(sizeof(mraid_device_t), GFP_KERNEL);
 754         if (raid_dev == NULL) return -1;
 755
 756
 757         /*
 758          * Attach the adapter soft state to raid device soft state
 759          */
 760         adapter->raid_device    = (caddr_t)raid_dev;
 761         raid_dev->fast_load     = megaraid_fast_load;
 762
 763
 764         // our baseport
 765         raid_dev->baseport = pci_resource_start(pdev, 0);
 766
 767         if (pci_request_regions(pdev, "MegaRAID: LSI Logic Corporation") != 0) {
 768
 769                 con_log(CL_ANN, (KERN_WARNING
 770                                 "megaraid: mem region busy\n"));
 771
 772                 goto out_free_raid_dev;
 773         }
 774
 775         raid_dev->baseaddr = ioremap_nocache(raid_dev->baseport, 128);
 776
 777         if (!raid_dev->baseaddr) {
 778
 779                 con_log(CL_ANN, (KERN_WARNING
 780                         "megaraid: could not map hba memory\n") );
 781
 782                 goto out_release_regions;
 783         }
 784
 785         /* initialize the mutual exclusion lock for the mailbox */
 786         spin_lock_init(&raid_dev->mailbox_lock);
 787
 788         /* allocate memory required for commands */
 789         if (megaraid_alloc_cmd_packets(adapter) != 0)
 790                 goto out_iounmap;
 791
 792         /*
 793          * Issue SYNC cmd to flush the pending cmds in the adapter
 794          * and initialize its internal state
 795          */
 796
 797         if (megaraid_mbox_fire_sync_cmd(adapter))
 798                 con_log(CL_ANN, ("megaraid: sync cmd failed\n"));
 799
 800         /*
 801          * Setup the rest of the soft state using the library of
 802          * FW routines
 803          */
 804
 805         /* request IRQ and register the interrupt service routine */
 806         if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
 807                 adapter)) {
 808
 809                 con_log(CL_ANN, (KERN_WARNING
 810                         "megaraid: Couldn't register IRQ %d!\n", adapter->irq));
 811                 goto out_alloc_cmds;
 812
 813         }
 814
 815         // Product info
 816         if (megaraid_mbox_product_info(adapter) != 0)
 817                 goto out_free_irq;
 818
 819         // Do we support extended CDBs
 820         adapter->max_cdb_sz = 10;
 821         if (megaraid_mbox_extended_cdb(adapter) == 0) {
 822                 adapter->max_cdb_sz = 16;
 823         }
 824
 825         /*
 826          * Do we support cluster environment, if we do, what is the initiator
 827          * id.
 828          * NOTE: In a non-cluster aware firmware environment, the LLD should
 829          * return 7 as initiator id.
 830          */
 831         adapter->ha             = 0;
 832         adapter->init_id        = -1;
 833         if (megaraid_mbox_support_ha(adapter, &adapter->init_id) == 0) {
 834                 adapter->ha = 1;
 835         }
 836
 837         /*
 838          * Prepare the device ids array to have the mapping between the kernel
 839          * device address and megaraid device address.
 840          * We export the physical devices on their actual addresses. The
 841          * logical drives are exported on a virtual SCSI channel
 842          */
 843         megaraid_mbox_setup_device_map(adapter);
 844
 845         // If the firmware supports random deletion, update the device id map
 846         if (megaraid_mbox_support_random_del(adapter)) {
 847
 848                 // Change the logical drives numbers in device_ids array one
 849                 // slot in device_ids is reserved for target id, that's why
 850                 // "<=" below
 851                 for (i = 0; i <= MAX_LOGICAL_DRIVES_40LD; i++) {
 852                         adapter->device_ids[adapter->max_channel][i] += 0x80;
 853                 }
 854                 adapter->device_ids[adapter->max_channel][adapter->init_id] =
 855                         0xFF;
 856
 857                 raid_dev->random_del_supported = 1;
 858         }
 859
 860         /*
 861          * find out the maximum number of scatter-gather elements supported by
 862          * this firmware
 863          */
 864         adapter->sglen = megaraid_mbox_get_max_sg(adapter);
 865
 866         // enumerate RAID and SCSI channels so that all devices on SCSI
 867         // channels can later be exported, including disk devices
 868         megaraid_mbox_enum_raid_scsi(adapter);
 869
 870         /*
 871          * Other parameters required by upper layer
 872          *
 873          * maximum number of sectors per IO command
 874          */
 875         adapter->max_sectors = megaraid_max_sectors;
 876
 877         /*
 878          * number of queued commands per LUN.
 879          */
 880         adapter->cmd_per_lun = megaraid_cmd_per_lun;
 881
 882         /*
 883          * Allocate resources required to issue FW calls, when sysfs is
 884          * accessed
 885          */
 886         if (megaraid_sysfs_alloc_resources(adapter) != 0)
 887                 goto out_free_irq;
 888
 889         // Set the DMA mask to 64-bit. All supported controllers as capable of
 890         // DMA in this range
 891         pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64);
 892
 893         if (((magic64 == HBA_SIGNATURE_64_BIT) &&
 894                 ((adapter->pdev->subsystem_device !=
 895                 PCI_SUBSYS_ID_MEGARAID_SATA_150_6) &&
 896                 (adapter->pdev->subsystem_device !=
 897                 PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) ||
 898                 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
 899                 adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
 900                 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
 901                 adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
 902                 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
 903                 adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) ||
 904                 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
 905                 adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
 906                 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
 907                 adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) {
 908                 if (pci_set_dma_mask(adapter->pdev, DMA_BIT_MASK(64))) {
 909                         con_log(CL_ANN, (KERN_WARNING
 910                                 "megaraid: DMA mask for 64-bit failed\n"));
 911
 912                         if (pci_set_dma_mask (adapter->pdev, DMA_BIT_MASK(32))) {
 913                                 con_log(CL_ANN, (KERN_WARNING
 914                                         "megaraid: 32-bit DMA mask failed\n"));
 915                                 goto out_free_sysfs_res;
 916                         }
 917                 }
 918         }
 919
 920         // setup tasklet for DPC
 921         tasklet_init(&adapter->dpc_h, megaraid_mbox_dpc,
 922                         (unsigned long)adapter);
 923
 924         con_log(CL_DLEVEL1, (KERN_INFO
 925                 "megaraid mbox hba successfully initialized\n"));
 926
 927         return 0;
 928
 929 out_free_sysfs_res:
 930         megaraid_sysfs_free_resources(adapter);
 931 out_free_irq:
 932         free_irq(adapter->irq, adapter);
 933 out_alloc_cmds:
 934         megaraid_free_cmd_packets(adapter);
 935 out_iounmap:
 936         iounmap(raid_dev->baseaddr);
 937 out_release_regions:
 938         pci_release_regions(pdev);
 939 out_free_raid_dev:
 940         kfree(raid_dev);
 941
 942         return -1;
 943 }
 944
 945
 946 /**
 947  * megaraid_fini_mbox - undo controller initialization
 948  * @adapter             : our soft state
 949  */
 950 static void
 951 megaraid_fini_mbox(adapter_t *adapter)
 952 {
 953         mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
 954
 955         // flush all caches
 956         megaraid_mbox_flush_cache(adapter);
 957
 958         tasklet_kill(&adapter->dpc_h);
 959
 960         megaraid_sysfs_free_resources(adapter);
 961
 962         megaraid_free_cmd_packets(adapter);
 963
 964         free_irq(adapter->irq, adapter);
 965
 966         iounmap(raid_dev->baseaddr);
 967
 968         pci_release_regions(adapter->pdev);
 969
 970         kfree(raid_dev);
 971
 972         return;
 973 }
 974
 975
 976 /**
 977  * megaraid_alloc_cmd_packets - allocate shared mailbox
 978  * @adapter             : soft state of the raid controller
 979  *
 980  * Allocate and align the shared mailbox. This maibox is used to issue
 981  * all the commands. For IO based controllers, the mailbox is also regsitered
 982  * with the FW. Allocate memory for all commands as well.
 983  * This is our big allocator.
 984  */
 985 static int
 986 megaraid_alloc_cmd_packets(adapter_t *adapter)
 987 {
 988         mraid_device_t          *raid_dev = ADAP2RAIDDEV(adapter);
 989         struct pci_dev          *pdev;
 990         unsigned long           align;
 991         scb_t                   *scb;
 992         mbox_ccb_t              *ccb;
 993         struct mraid_pci_blk    *epthru_pci_blk;
 994         struct mraid_pci_blk    *sg_pci_blk;
 995         struct mraid_pci_blk    *mbox_pci_blk;
 996         int                     i;
 997
 998         pdev = adapter->pdev;
 999
1000         /*
1001          * Setup the mailbox
1002          * Allocate the common 16-byte aligned memory for the handshake
1003          * mailbox.
1004          */
1005         raid_dev->una_mbox64 = pci_alloc_consistent(adapter->pdev,
1006                         sizeof(mbox64_t), &raid_dev->una_mbox64_dma);
1007
1008         if (!raid_dev->una_mbox64) {
1009                 con_log(CL_ANN, (KERN_WARNING
1010                         "megaraid: out of memory, %s %d\n", __func__,
1011                         __LINE__));
1012                 return -1;
1013         }
1014         memset(raid_dev->una_mbox64, 0, sizeof(mbox64_t));
1015
1016         /*
1017          * Align the mailbox at 16-byte boundary
1018          */
1019         raid_dev->mbox  = &raid_dev->una_mbox64->mbox32;
1020
1021         raid_dev->mbox  = (mbox_t *)((((unsigned long)raid_dev->mbox) + 15) &
1022                                 (~0UL ^ 0xFUL));
1023
1024         raid_dev->mbox64 = (mbox64_t *)(((unsigned long)raid_dev->mbox) - 8);
1025
1026         align = ((void *)raid_dev->mbox -
1027                         ((void *)&raid_dev->una_mbox64->mbox32));
1028
1029         raid_dev->mbox_dma = (unsigned long)raid_dev->una_mbox64_dma + 8 +
1030                         align;
1031
1032         // Allocate memory for commands issued internally
1033         adapter->ibuf = pci_alloc_consistent(pdev, MBOX_IBUF_SIZE,
1034                                 &adapter->ibuf_dma_h);
1035         if (!adapter->ibuf) {
1036
1037                 con_log(CL_ANN, (KERN_WARNING
1038                         "megaraid: out of memory, %s %d\n", __func__,
1039                         __LINE__));
1040
1041                 goto out_free_common_mbox;
1042         }
1043         memset(adapter->ibuf, 0, MBOX_IBUF_SIZE);
1044
1045         // Allocate memory for our SCSI Command Blocks and their associated
1046         // memory
1047
1048         /*
1049          * Allocate memory for the base list of scb. Later allocate memory for
1050          * CCBs and embedded components of each CCB and point the pointers in
1051          * scb to the allocated components
1052          * NOTE: The code to allocate SCB will be duplicated in all the LLD
1053          * since the calling routine does not yet know the number of available
1054          * commands.
1055          */
1056         adapter->kscb_list = kcalloc(MBOX_MAX_SCSI_CMDS, sizeof(scb_t), GFP_KERNEL);
1057
1058         if (adapter->kscb_list == NULL) {
1059                 con_log(CL_ANN, (KERN_WARNING
1060                         "megaraid: out of memory, %s %d\n", __func__,
1061                         __LINE__));
1062                 goto out_free_ibuf;
1063         }
1064
1065         // memory allocation for our command packets
1066         if (megaraid_mbox_setup_dma_pools(adapter) != 0) {
1067                 con_log(CL_ANN, (KERN_WARNING
1068                         "megaraid: out of memory, %s %d\n", __func__,
1069                         __LINE__));
1070                 goto out_free_scb_list;
1071         }
1072
1073         // Adjust the scb pointers and link in the free pool
1074         epthru_pci_blk  = raid_dev->epthru_pool;
1075         sg_pci_blk      = raid_dev->sg_pool;
1076         mbox_pci_blk    = raid_dev->mbox_pool;
1077
1078         for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1079                 scb                     = adapter->kscb_list + i;
1080                 ccb                     = raid_dev->ccb_list + i;
1081
1082                 ccb->mbox       = (mbox_t *)(mbox_pci_blk[i].vaddr + 16);
1083                 ccb->raw_mbox   = (uint8_t *)ccb->mbox;
1084                 ccb->mbox64     = (mbox64_t *)(mbox_pci_blk[i].vaddr + 8);
1085                 ccb->mbox_dma_h = (unsigned long)mbox_pci_blk[i].dma_addr + 16;
1086
1087                 // make sure the mailbox is aligned properly
1088                 if (ccb->mbox_dma_h & 0x0F) {
1089                         con_log(CL_ANN, (KERN_CRIT
1090                                 "megaraid mbox: not aligned on 16-bytes\n"));
1091
1092                         goto out_teardown_dma_pools;
1093                 }
1094
1095                 ccb->epthru             = (mraid_epassthru_t *)
1096                                                 epthru_pci_blk[i].vaddr;
1097                 ccb->epthru_dma_h       = epthru_pci_blk[i].dma_addr;
1098                 ccb->pthru              = (mraid_passthru_t *)ccb->epthru;
1099                 ccb->pthru_dma_h        = ccb->epthru_dma_h;
1100
1101
1102                 ccb->sgl64              = (mbox_sgl64 *)sg_pci_blk[i].vaddr;
1103                 ccb->sgl_dma_h          = sg_pci_blk[i].dma_addr;
1104                 ccb->sgl32              = (mbox_sgl32 *)ccb->sgl64;
1105
1106                 scb->ccb                = (caddr_t)ccb;
1107                 scb->gp                 = 0;
1108
1109                 scb->sno                = i;    // command index
1110
1111                 scb->scp                = NULL;
1112                 scb->state              = SCB_FREE;
1113                 scb->dma_direction      = PCI_DMA_NONE;
1114                 scb->dma_type           = MRAID_DMA_NONE;
1115                 scb->dev_channel        = -1;
1116                 scb->dev_target         = -1;
1117
1118                 // put scb in the free pool
1119                 list_add_tail(&scb->list, &adapter->kscb_pool);
1120         }
1121
1122         return 0;
1123
1124 out_teardown_dma_pools:
1125         megaraid_mbox_teardown_dma_pools(adapter);
1126 out_free_scb_list:
1127         kfree(adapter->kscb_list);
1128 out_free_ibuf:
1129         pci_free_consistent(pdev, MBOX_IBUF_SIZE, (void *)adapter->ibuf,
1130                 adapter->ibuf_dma_h);
1131 out_free_common_mbox:
1132         pci_free_consistent(adapter->pdev, sizeof(mbox64_t),
1133                 (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma);
1134
1135         return -1;
1136 }
1137
1138
1139 /**
1140  * megaraid_free_cmd_packets - free memory
1141  * @adapter             : soft state of the raid controller
1142  *
1143  * Release memory resources allocated for commands.
1144  */
1145 static void
1146 megaraid_free_cmd_packets(adapter_t *adapter)
1147 {
1148         mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1149
1150         megaraid_mbox_teardown_dma_pools(adapter);
1151
1152         kfree(adapter->kscb_list);
1153
1154         pci_free_consistent(adapter->pdev, MBOX_IBUF_SIZE,
1155                 (void *)adapter->ibuf, adapter->ibuf_dma_h);
1156
1157         pci_free_consistent(adapter->pdev, sizeof(mbox64_t),
1158                 (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma);
1159         return;
1160 }
1161
1162
1163 /**
1164  * megaraid_mbox_setup_dma_pools - setup dma pool for command packets
1165  * @adapter             : HBA soft state
1166  *
1167  * Setup the dma pools for mailbox, passthru and extended passthru structures,
1168  * and scatter-gather lists.
1169  */
1170 static int
1171 megaraid_mbox_setup_dma_pools(adapter_t *adapter)
1172 {
1173         mraid_device_t          *raid_dev = ADAP2RAIDDEV(adapter);
1174         struct mraid_pci_blk    *epthru_pci_blk;
1175         struct mraid_pci_blk    *sg_pci_blk;
1176         struct mraid_pci_blk    *mbox_pci_blk;
1177         int                     i;
1178
1179
1180
1181         // Allocate memory for 16-bytes aligned mailboxes
1182         raid_dev->mbox_pool_handle = pci_pool_create("megaraid mbox pool",
1183                                                 adapter->pdev,
1184                                                 sizeof(mbox64_t) + 16,
1185                                                 16, 0);
1186
1187         if (raid_dev->mbox_pool_handle == NULL) {
1188                 goto fail_setup_dma_pool;
1189         }
1190
1191         mbox_pci_blk = raid_dev->mbox_pool;
1192         for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1193                 mbox_pci_blk[i].vaddr = pci_pool_alloc(
1194                                                 raid_dev->mbox_pool_handle,
1195                                                 GFP_KERNEL,
1196                                                 &mbox_pci_blk[i].dma_addr);
1197                 if (!mbox_pci_blk[i].vaddr) {
1198                         goto fail_setup_dma_pool;
1199                 }
1200         }
1201
1202         /*
1203          * Allocate memory for each embedded passthru strucuture pointer
1204          * Request for a 128 bytes aligned structure for each passthru command
1205          * structure
1206          * Since passthru and extended passthru commands are exclusive, they
1207          * share common memory pool. Passthru structures piggyback on memory
1208          * allocted to extended passthru since passthru is smaller of the two
1209          */
1210         raid_dev->epthru_pool_handle = pci_pool_create("megaraid mbox pthru",
1211                         adapter->pdev, sizeof(mraid_epassthru_t), 128, 0);
1212
1213         if (raid_dev->epthru_pool_handle == NULL) {
1214                 goto fail_setup_dma_pool;
1215         }
1216
1217         epthru_pci_blk = raid_dev->epthru_pool;
1218         for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1219                 epthru_pci_blk[i].vaddr = pci_pool_alloc(
1220                                                 raid_dev->epthru_pool_handle,
1221                                                 GFP_KERNEL,
1222                                                 &epthru_pci_blk[i].dma_addr);
1223                 if (!epthru_pci_blk[i].vaddr) {
1224                         goto fail_setup_dma_pool;
1225                 }
1226         }
1227
1228
1229         // Allocate memory for each scatter-gather list. Request for 512 bytes
1230         // alignment for each sg list
1231         raid_dev->sg_pool_handle = pci_pool_create("megaraid mbox sg",
1232                                         adapter->pdev,
1233                                         sizeof(mbox_sgl64) * MBOX_MAX_SG_SIZE,
1234                                         512, 0);
1235
1236         if (raid_dev->sg_pool_handle == NULL) {
1237                 goto fail_setup_dma_pool;
1238         }
1239
1240         sg_pci_blk = raid_dev->sg_pool;
1241         for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1242                 sg_pci_blk[i].vaddr = pci_pool_alloc(
1243                                                 raid_dev->sg_pool_handle,
1244                                                 GFP_KERNEL,
1245                                                 &sg_pci_blk[i].dma_addr);
1246                 if (!sg_pci_blk[i].vaddr) {
1247                         goto fail_setup_dma_pool;
1248                 }
1249         }
1250
1251         return 0;
1252
1253 fail_setup_dma_pool:
1254         megaraid_mbox_teardown_dma_pools(adapter);
1255         return -1;
1256 }
1257
1258
1259 /**
1260  * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets
1261  * @adapter             : HBA soft state
1262  *
1263  * Teardown the dma pool for mailbox, passthru and extended passthru
1264  * structures, and scatter-gather lists.
1265  */
1266 static void
1267 megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
1268 {
1269         mraid_device_t          *raid_dev = ADAP2RAIDDEV(adapter);
1270         struct mraid_pci_blk    *epthru_pci_blk;
1271         struct mraid_pci_blk    *sg_pci_blk;
1272         struct mraid_pci_blk    *mbox_pci_blk;
1273         int                     i;
1274
1275
1276         sg_pci_blk = raid_dev->sg_pool;
1277         for (i = 0; i < MBOX_MAX_SCSI_CMDS && sg_pci_blk[i].vaddr; i++) {
1278                 pci_pool_free(raid_dev->sg_pool_handle, sg_pci_blk[i].vaddr,
1279                         sg_pci_blk[i].dma_addr);
1280         }
1281         if (raid_dev->sg_pool_handle)
1282                 pci_pool_destroy(raid_dev->sg_pool_handle);
1283
1284
1285         epthru_pci_blk = raid_dev->epthru_pool;
1286         for (i = 0; i < MBOX_MAX_SCSI_CMDS && epthru_pci_blk[i].vaddr; i++) {
1287                 pci_pool_free(raid_dev->epthru_pool_handle,
1288                         epthru_pci_blk[i].vaddr, epthru_pci_blk[i].dma_addr);
1289         }
1290         if (raid_dev->epthru_pool_handle)
1291                 pci_pool_destroy(raid_dev->epthru_pool_handle);
1292
1293
1294         mbox_pci_blk = raid_dev->mbox_pool;
1295         for (i = 0; i < MBOX_MAX_SCSI_CMDS && mbox_pci_blk[i].vaddr; i++) {
1296                 pci_pool_free(raid_dev->mbox_pool_handle,
1297                         mbox_pci_blk[i].vaddr, mbox_pci_blk[i].dma_addr);
1298         }
1299         if (raid_dev->mbox_pool_handle)
1300                 pci_pool_destroy(raid_dev->mbox_pool_handle);
1301
1302         return;
1303 }
1304
1305
1306 /**
1307  * megaraid_alloc_scb - detach and return a scb from the free list
1308  * @adapter     : controller's soft state
1309  * @scp         : pointer to the scsi command to be executed
1310  *
1311  * Return the scb from the head of the free list. %NULL if there are none
1312  * available.
1313  */
1314 static scb_t *
1315 megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
1316 {
1317         struct list_head        *head = &adapter->kscb_pool;
1318         scb_t                   *scb = NULL;
1319         unsigned long           flags;
1320
1321         // detach scb from free pool
1322         spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags);
1323
1324         if (list_empty(head)) {
1325                 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1326                 return NULL;
1327         }
1328
1329         scb = list_entry(head->next, scb_t, list);
1330         list_del_init(&scb->list);
1331
1332         spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1333
1334         scb->state      = SCB_ACTIVE;
1335         scb->scp        = scp;
1336         scb->dma_type   = MRAID_DMA_NONE;
1337
1338         return scb;
1339 }
1340
1341
1342 /**
1343  * megaraid_dealloc_scb - return the scb to the free pool
1344  * @adapter     : controller's soft state
1345  * @scb         : scb to be freed
1346  *
1347  * Return the scb back to the free list of scbs. The caller must 'flush' the
1348  * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc.
1349  * NOTE NOTE: Make sure the scb is not on any list before calling this
1350  * routine.
1351  */
1352 static inline void
1353 megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
1354 {
1355         unsigned long           flags;
1356
1357         // put scb in the free pool
1358         scb->state      = SCB_FREE;
1359         scb->scp        = NULL;
1360         spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags);
1361
1362         list_add(&scb->list, &adapter->kscb_pool);
1363
1364         spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1365
1366         return;
1367 }
1368
1369
1370 /**
1371  * megaraid_mbox_mksgl - make the scatter-gather list
1372  * @adapter     : controller's soft state
1373  * @scb         : scsi control block
1374  *
1375  * Prepare the scatter-gather list.
1376  */
1377 static int
1378 megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
1379 {
1380         struct scatterlist      *sgl;
1381         mbox_ccb_t              *ccb;
1382         struct scsi_cmnd        *scp;
1383         int                     sgcnt;
1384         int                     i;
1385
1386
1387         scp     = scb->scp;
1388         ccb     = (mbox_ccb_t *)scb->ccb;
1389
1390         sgcnt = scsi_dma_map(scp);
1391         BUG_ON(sgcnt < 0 || sgcnt > adapter->sglen);
1392
1393         // no mapping required if no data to be transferred
1394         if (!sgcnt)
1395                 return 0;
1396
1397         scb->dma_type = MRAID_DMA_WSG;
1398
1399         scsi_for_each_sg(scp, sgl, sgcnt, i) {
1400                 ccb->sgl64[i].address   = sg_dma_address(sgl);
1401                 ccb->sgl64[i].length    = sg_dma_len(sgl);
1402         }
1403
1404         // Return count of SG nodes
1405         return sgcnt;
1406 }
1407
1408
1409 /**
1410  * mbox_post_cmd - issue a mailbox command
1411  * @adapter     : controller's soft state
1412  * @scb         : command to be issued
1413  *
1414  * Post the command to the controller if mailbox is available.
1415  */
1416 static int
1417 mbox_post_cmd(adapter_t *adapter, scb_t *scb)
1418 {
1419         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
1420         mbox64_t        *mbox64;
1421         mbox_t          *mbox;
1422         mbox_ccb_t      *ccb;
1423         unsigned long   flags;
1424         unsigned int    i = 0;
1425
1426
1427         ccb     = (mbox_ccb_t *)scb->ccb;
1428         mbox    = raid_dev->mbox;
1429         mbox64  = raid_dev->mbox64;
1430
1431         /*
1432          * Check for busy mailbox. If it is, return failure - the caller
1433          * should retry later.
1434          */
1435         spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags);
1436
1437         if (unlikely(mbox->busy)) {
1438                 do {
1439                         udelay(1);
1440                         i++;
1441                         rmb();
1442                 } while(mbox->busy && (i < max_mbox_busy_wait));
1443
1444                 if (mbox->busy) {
1445
1446                         spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
1447
1448                         return -1;
1449                 }
1450         }
1451
1452
1453         // Copy this command's mailbox data into "adapter's" mailbox
1454         memcpy((caddr_t)mbox64, (caddr_t)ccb->mbox64, 22);
1455         mbox->cmdid = scb->sno;
1456
1457         adapter->outstanding_cmds++;
1458
1459         if (scb->dma_direction == PCI_DMA_TODEVICE)
1460                 pci_dma_sync_sg_for_device(adapter->pdev,
1461                                            scsi_sglist(scb->scp),
1462                                            scsi_sg_count(scb->scp),
1463                                            PCI_DMA_TODEVICE);
1464
1465         mbox->busy      = 1;    // Set busy
1466         mbox->poll      = 0;
1467         mbox->ack       = 0;
1468         wmb();
1469
1470         WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
1471
1472         spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
1473
1474         return 0;
1475 }
1476
1477
1478 /**
1479  * megaraid_queue_command - generic queue entry point for all LLDs
1480  * @scp         : pointer to the scsi command to be executed
1481  * @done        : callback routine to be called after the cmd has be completed
1482  *
1483  * Queue entry point for mailbox based controllers.
1484  */
1485 static int
1486 megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
1487 {
1488         adapter_t       *adapter;
1489         scb_t           *scb;
1490         int             if_busy;
1491
1492         adapter         = SCP2ADAPTER(scp);
1493         scp->scsi_done  = done;
1494         scp->result     = 0;
1495
1496         /*
1497          * Allocate and build a SCB request
1498          * if_busy flag will be set if megaraid_mbox_build_cmd() command could
1499          * not allocate scb. We will return non-zero status in that case.
1500          * NOTE: scb can be null even though certain commands completed
1501          * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, it would
1502          * return 0 in that case, and we would do the callback right away.
1503          */
1504         if_busy = 0;
1505         scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
1506         if (!scb) {     // command already completed
1507                 done(scp);
1508                 return 0;
1509         }
1510
1511         megaraid_mbox_runpendq(adapter, scb);
1512         return if_busy;
1513 }
1514
1515 /**
1516  * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
1517  * @adapter     : controller's soft state
1518  * @scp         : mid-layer scsi command pointer
1519  * @busy        : set if request could not be completed because of lack of
1520  *              resources
1521  *
1522  * Transform the mid-layer scsi command to megaraid firmware lingua.
1523  * Convert the command issued by mid-layer to format understood by megaraid
1524  * firmware. We also complete certain commands without sending them to firmware.
1525  */
1526 static scb_t *
1527 megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
1528 {
1529         mraid_device_t          *rdev = ADAP2RAIDDEV(adapter);
1530         int                     channel;
1531         int                     target;
1532         int                     islogical;
1533         mbox_ccb_t              *ccb;
1534         mraid_passthru_t        *pthru;
1535         mbox64_t                *mbox64;
1536         mbox_t                  *mbox;
1537         scb_t                   *scb;
1538         char                    skip[] = "skipping";
1539         char                    scan[] = "scanning";
1540         char                    *ss;
1541
1542
1543         /*
1544          * Get the appropriate device map for the device this command is
1545          * intended for
1546          */
1547         MRAID_GET_DEVICE_MAP(adapter, scp, channel, target, islogical);
1548
1549         /*
1550          * Logical drive commands
1551          */
1552         if (islogical) {
1553                 switch (scp->cmnd[0]) {
1554                 case TEST_UNIT_READY:
1555                         /*
1556                          * Do we support clustering and is the support enabled
1557                          * If no, return success always
1558                          */
1559                         if (!adapter->ha) {
1560                                 scp->result = (DID_OK << 16);
1561                                 return NULL;
1562                         }
1563
1564                         if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1565                                 scp->result = (DID_ERROR << 16);
1566                                 *busy = 1;
1567                                 return NULL;
1568                         }
1569
1570                         scb->dma_direction      = scp->sc_data_direction;
1571                         scb->dev_channel        = 0xFF;
1572                         scb->dev_target         = target;
1573                         ccb                     = (mbox_ccb_t *)scb->ccb;
1574
1575                         /*
1576                          * The command id will be provided by the command
1577                          * issuance routine
1578                          */
1579                         ccb->raw_mbox[0]        = CLUSTER_CMD;
1580                         ccb->raw_mbox[2]        = RESERVATION_STATUS;
1581                         ccb->raw_mbox[3]        = target;
1582
1583                         return scb;
1584
1585                 case MODE_SENSE:
1586                 {
1587                         struct scatterlist      *sgl;
1588                         caddr_t                 vaddr;
1589
1590                         sgl = scsi_sglist(scp);
1591                         if (sg_page(sgl)) {
1592                                 vaddr = (caddr_t) sg_virt(&sgl[0]);
1593
1594                                 memset(vaddr, 0, scp->cmnd[4]);
1595                         }
1596                         else {
1597                                 con_log(CL_ANN, (KERN_WARNING
1598                                                  "megaraid mailbox: invalid sg:%d\n",
1599                                                  __LINE__));
1600                         }
1601                 }
1602                 scp->result = (DID_OK << 16);
1603                 return NULL;
1604
1605                 case INQUIRY:
1606                         /*
1607                          * Display the channel scan for logical drives
1608                          * Do not display scan for a channel if already done.
1609                          */
1610                         if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) {
1611
1612                                 con_log(CL_ANN, (KERN_INFO
1613                                         "scsi[%d]: scanning scsi channel %d",
1614                                         adapter->host->host_no,
1615                                         SCP2CHANNEL(scp)));
1616
1617                                 con_log(CL_ANN, (
1618                                         " [virtual] for logical drives\n"));
1619
1620                                 rdev->last_disp |= (1L << SCP2CHANNEL(scp));
1621                         }
1622
1623                         if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) {
1624                                 scp->sense_buffer[0] = 0x70;
1625                                 scp->sense_buffer[2] = ILLEGAL_REQUEST;
1626                                 scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB;
1627                                 scp->result = CHECK_CONDITION << 1;
1628                                 return NULL;
1629                         }
1630
1631                         /* Fall through */
1632
1633                 case READ_CAPACITY:
1634                         /*
1635                          * Do not allow LUN > 0 for logical drives and
1636                          * requests for more than 40 logical drives
1637                          */
1638                         if (SCP2LUN(scp)) {
1639                                 scp->result = (DID_BAD_TARGET << 16);
1640                                 return NULL;
1641                         }
1642                         if ((target % 0x80) >= MAX_LOGICAL_DRIVES_40LD) {
1643                                 scp->result = (DID_BAD_TARGET << 16);
1644                                 return NULL;
1645                         }
1646
1647
1648                         /* Allocate a SCB and initialize passthru */
1649                         if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1650                                 scp->result = (DID_ERROR << 16);
1651                                 *busy = 1;
1652                                 return NULL;
1653                         }
1654
1655                         ccb                     = (mbox_ccb_t *)scb->ccb;
1656                         scb->dev_channel        = 0xFF;
1657                         scb->dev_target         = target;
1658                         pthru                   = ccb->pthru;
1659                         mbox                    = ccb->mbox;
1660                         mbox64                  = ccb->mbox64;
1661
1662                         pthru->timeout          = 0;
1663                         pthru->ars              = 1;
1664                         pthru->reqsenselen      = 14;
1665                         pthru->islogical        = 1;
1666                         pthru->logdrv           = target;
1667                         pthru->cdblen           = scp->cmd_len;
1668                         memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
1669
1670                         mbox->cmd               = MBOXCMD_PASSTHRU64;
1671                         scb->dma_direction      = scp->sc_data_direction;
1672
1673                         pthru->dataxferlen      = scsi_bufflen(scp);
1674                         pthru->dataxferaddr     = ccb->sgl_dma_h;
1675                         pthru->numsge           = megaraid_mbox_mksgl(adapter,
1676                                                         scb);
1677
1678                         mbox->xferaddr          = 0xFFFFFFFF;
1679                         mbox64->xferaddr_lo     = (uint32_t )ccb->pthru_dma_h;
1680                         mbox64->xferaddr_hi     = 0;
1681
1682                         return scb;
1683
1684                 case READ_6:
1685                 case WRITE_6:
1686                 case READ_10:
1687                 case WRITE_10:
1688                 case READ_12:
1689                 case WRITE_12:
1690
1691                         /*
1692                          * Allocate a SCB and initialize mailbox
1693                          */
1694                         if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1695                                 scp->result = (DID_ERROR << 16);
1696                                 *busy = 1;
1697                                 return NULL;
1698                         }
1699                         ccb                     = (mbox_ccb_t *)scb->ccb;
1700                         scb->dev_channel        = 0xFF;
1701                         scb->dev_target         = target;
1702                         mbox                    = ccb->mbox;
1703                         mbox64                  = ccb->mbox64;
1704                         mbox->logdrv            = target;
1705
1706                         /*
1707                          * A little HACK: 2nd bit is zero for all scsi read
1708                          * commands and is set for all scsi write commands
1709                          */
1710                         mbox->cmd = (scp->cmnd[0] & 0x02) ?  MBOXCMD_LWRITE64:
1711                                         MBOXCMD_LREAD64 ;
1712
1713                         /*
1714                          * 6-byte READ(0x08) or WRITE(0x0A) cdb
1715                          */
1716                         if (scp->cmd_len == 6) {
1717                                 mbox->numsectors = (uint32_t)scp->cmnd[4];
1718                                 mbox->lba =
1719                                         ((uint32_t)scp->cmnd[1] << 16)  |
1720                                         ((uint32_t)scp->cmnd[2] << 8)   |
1721                                         (uint32_t)scp->cmnd[3];
1722
1723                                 mbox->lba &= 0x1FFFFF;
1724                         }
1725
1726                         /*
1727                          * 10-byte READ(0x28) or WRITE(0x2A) cdb
1728                          */
1729                         else if (scp->cmd_len == 10) {
1730                                 mbox->numsectors =
1731                                         (uint32_t)scp->cmnd[8] |
1732                                         ((uint32_t)scp->cmnd[7] << 8);
1733                                 mbox->lba =
1734                                         ((uint32_t)scp->cmnd[2] << 24) |
1735                                         ((uint32_t)scp->cmnd[3] << 16) |
1736                                         ((uint32_t)scp->cmnd[4] << 8) |
1737                                         (uint32_t)scp->cmnd[5];
1738                         }
1739
1740                         /*
1741                          * 12-byte READ(0xA8) or WRITE(0xAA) cdb
1742                          */
1743                         else if (scp->cmd_len == 12) {
1744                                 mbox->lba =
1745                                         ((uint32_t)scp->cmnd[2] << 24) |
1746                                         ((uint32_t)scp->cmnd[3] << 16) |
1747                                         ((uint32_t)scp->cmnd[4] << 8) |
1748                                         (uint32_t)scp->cmnd[5];
1749
1750                                 mbox->numsectors =
1751                                         ((uint32_t)scp->cmnd[6] << 24) |
1752                                         ((uint32_t)scp->cmnd[7] << 16) |
1753                                         ((uint32_t)scp->cmnd[8] << 8) |
1754                                         (uint32_t)scp->cmnd[9];
1755                         }
1756                         else {
1757                                 con_log(CL_ANN, (KERN_WARNING
1758                                         "megaraid: unsupported CDB length\n"));
1759
1760                                 megaraid_dealloc_scb(adapter, scb);
1761
1762                                 scp->result = (DID_ERROR << 16);
1763                                 return NULL;
1764                         }
1765
1766                         scb->dma_direction = scp->sc_data_direction;
1767
1768                         // Calculate Scatter-Gather info
1769                         mbox64->xferaddr_lo     = (uint32_t )ccb->sgl_dma_h;
1770                         mbox->numsge            = megaraid_mbox_mksgl(adapter,
1771                                                         scb);
1772                         mbox->xferaddr          = 0xFFFFFFFF;
1773                         mbox64->xferaddr_hi     = 0;
1774
1775                         return scb;
1776
1777                 case RESERVE:
1778                 case RELEASE:
1779                         /*
1780                          * Do we support clustering and is the support enabled
1781                          */
1782                         if (!adapter->ha) {
1783                                 scp->result = (DID_BAD_TARGET << 16);
1784                                 return NULL;
1785                         }
1786
1787                         /*
1788                          * Allocate a SCB and initialize mailbox
1789                          */
1790                         if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1791                                 scp->result = (DID_ERROR << 16);
1792                                 *busy = 1;
1793                                 return NULL;
1794                         }
1795
1796                         ccb                     = (mbox_ccb_t *)scb->ccb;
1797                         scb->dev_channel        = 0xFF;
1798                         scb->dev_target         = target;
1799                         ccb->raw_mbox[0]        = CLUSTER_CMD;
1800                         ccb->raw_mbox[2]        =  (scp->cmnd[0] == RESERVE) ?
1801                                                 RESERVE_LD : RELEASE_LD;
1802
1803                         ccb->raw_mbox[3]        = target;
1804                         scb->dma_direction      = scp->sc_data_direction;
1805
1806                         return scb;
1807
1808                 default:
1809                         scp->result = (DID_BAD_TARGET << 16);
1810                         return NULL;
1811                 }
1812         }
1813         else { // Passthru device commands
1814
1815                 // Do not allow access to target id > 15 or LUN > 7
1816                 if (target > 15 || SCP2LUN(scp) > 7) {
1817                         scp->result = (DID_BAD_TARGET << 16);
1818                         return NULL;
1819                 }
1820
1821                 // if fast load option was set and scan for last device is
1822                 // over, reset the fast_load flag so that during a possible
1823                 // next scan, devices can be made available
1824                 if (rdev->fast_load && (target == 15) &&
1825                         (SCP2CHANNEL(scp) == adapter->max_channel -1)) {
1826
1827                         con_log(CL_ANN, (KERN_INFO
1828                         "megaraid[%d]: physical device scan re-enabled\n",
1829                                 adapter->host->host_no));
1830                         rdev->fast_load = 0;
1831                 }
1832
1833                 /*
1834                  * Display the channel scan for physical devices
1835                  */
1836                 if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) {
1837
1838                         ss = rdev->fast_load ? skip : scan;
1839
1840                         con_log(CL_ANN, (KERN_INFO
1841                                 "scsi[%d]: %s scsi channel %d [Phy %d]",
1842                                 adapter->host->host_no, ss, SCP2CHANNEL(scp),
1843                                 channel));
1844
1845                         con_log(CL_ANN, (
1846                                 " for non-raid devices\n"));
1847
1848                         rdev->last_disp |= (1L << SCP2CHANNEL(scp));
1849                 }
1850
1851                 // disable channel sweep if fast load option given
1852                 if (rdev->fast_load) {
1853                         scp->result = (DID_BAD_TARGET << 16);
1854                         return NULL;
1855                 }
1856
1857                 // Allocate a SCB and initialize passthru
1858                 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1859                         scp->result = (DID_ERROR << 16);
1860                         *busy = 1;
1861                         return NULL;
1862                 }
1863
1864                 ccb                     = (mbox_ccb_t *)scb->ccb;
1865                 scb->dev_channel        = channel;
1866                 scb->dev_target         = target;
1867                 scb->dma_direction      = scp->sc_data_direction;
1868                 mbox                    = ccb->mbox;
1869                 mbox64                  = ccb->mbox64;
1870
1871                 // Does this firmware support extended CDBs
1872                 if (adapter->max_cdb_sz == 16) {
1873                         mbox->cmd               = MBOXCMD_EXTPTHRU;
1874
1875                         megaraid_mbox_prepare_epthru(adapter, scb, scp);
1876
1877                         mbox64->xferaddr_lo     = (uint32_t)ccb->epthru_dma_h;
1878                         mbox64->xferaddr_hi     = 0;
1879                         mbox->xferaddr          = 0xFFFFFFFF;
1880                 }
1881                 else {
1882                         mbox->cmd = MBOXCMD_PASSTHRU64;
1883
1884                         megaraid_mbox_prepare_pthru(adapter, scb, scp);
1885
1886                         mbox64->xferaddr_lo     = (uint32_t)ccb->pthru_dma_h;
1887                         mbox64->xferaddr_hi     = 0;
1888                         mbox->xferaddr          = 0xFFFFFFFF;
1889                 }
1890                 return scb;
1891         }
1892
1893         // NOT REACHED
1894 }
1895
1896
1897 /**
1898  * megaraid_mbox_runpendq - execute commands queued in the pending queue
1899  * @adapter     : controller's soft state
1900  * @scb_q       : SCB to be queued in the pending list
1901  *
1902  * Scan the pending list for commands which are not yet issued and try to
1903  * post to the controller. The SCB can be a null pointer, which would indicate
1904  * no SCB to be queue, just try to execute the ones in the pending list.
1905  *
1906  * NOTE: We do not actually traverse the pending list. The SCBs are plucked
1907  * out from the head of the pending list. If it is successfully issued, the
1908  * next SCB is at the head now.
1909  */
1910 static void
1911 megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q)
1912 {
1913         scb_t                   *scb;
1914         unsigned long           flags;
1915
1916         spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1917
1918         if (scb_q) {
1919                 scb_q->state = SCB_PENDQ;
1920                 list_add_tail(&scb_q->list, &adapter->pend_list);
1921         }
1922
1923         // if the adapter in not in quiescent mode, post the commands to FW
1924         if (adapter->quiescent) {
1925                 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1926                 return;
1927         }
1928
1929         while (!list_empty(&adapter->pend_list)) {
1930
1931                 assert_spin_locked(PENDING_LIST_LOCK(adapter));
1932
1933                 scb = list_entry(adapter->pend_list.next, scb_t, list);
1934
1935                 // remove the scb from the pending list and try to
1936                 // issue. If we are unable to issue it, put back in
1937                 // the pending list and return
1938
1939                 list_del_init(&scb->list);
1940
1941                 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1942
1943                 // if mailbox was busy, return SCB back to pending
1944                 // list. Make sure to add at the head, since that's
1945                 // where it would have been removed from
1946
1947                 scb->state = SCB_ISSUED;
1948
1949                 if (mbox_post_cmd(adapter, scb) != 0) {
1950
1951                         spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1952
1953                         scb->state = SCB_PENDQ;
1954
1955                         list_add(&scb->list, &adapter->pend_list);
1956
1957                         spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter),
1958                                 flags);
1959
1960                         return;
1961                 }
1962
1963                 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1964         }
1965
1966         spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1967
1968
1969         return;
1970 }
1971
1972
1973 /**
1974  * megaraid_mbox_prepare_pthru - prepare a command for physical devices
1975  * @adapter     : pointer to controller's soft state
1976  * @scb         : scsi control block
1977  * @scp         : scsi command from the mid-layer
1978  *
1979  * Prepare a command for the scsi physical devices.
1980  */
1981 static void
1982 megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
1983                 struct scsi_cmnd *scp)
1984 {
1985         mbox_ccb_t              *ccb;
1986         mraid_passthru_t        *pthru;
1987         uint8_t                 channel;
1988         uint8_t                 target;
1989
1990         ccb     = (mbox_ccb_t *)scb->ccb;
1991         pthru   = ccb->pthru;
1992         channel = scb->dev_channel;
1993         target  = scb->dev_target;
1994
1995         // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout
1996         pthru->timeout          = 4;
1997         pthru->ars              = 1;
1998         pthru->islogical        = 0;
1999         pthru->channel          = 0;
2000         pthru->target           = (channel << 4) | target;
2001         pthru->logdrv           = SCP2LUN(scp);
2002         pthru->reqsenselen      = 14;
2003         pthru->cdblen           = scp->cmd_len;
2004
2005         memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
2006
2007         if (scsi_bufflen(scp)) {
2008                 pthru->dataxferlen      = scsi_bufflen(scp);
2009                 pthru->dataxferaddr     = ccb->sgl_dma_h;
2010                 pthru->numsge           = megaraid_mbox_mksgl(adapter, scb);
2011         }
2012         else {
2013                 pthru->dataxferaddr     = 0;
2014                 pthru->dataxferlen      = 0;
2015                 pthru->numsge           = 0;
2016         }
2017         return;
2018 }
2019
2020
2021 /**
2022  * megaraid_mbox_prepare_epthru - prepare a command for physical devices
2023  * @adapter     : pointer to controller's soft state
2024  * @scb         : scsi control block
2025  * @scp         : scsi command from the mid-layer
2026  *
2027  * Prepare a command for the scsi physical devices. This rountine prepares
2028  * commands for devices which can take extended CDBs (>10 bytes).
2029  */
2030 static void
2031 megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
2032                 struct scsi_cmnd *scp)
2033 {
2034         mbox_ccb_t              *ccb;
2035         mraid_epassthru_t       *epthru;
2036         uint8_t                 channel;
2037         uint8_t                 target;
2038
2039         ccb     = (mbox_ccb_t *)scb->ccb;
2040         epthru  = ccb->epthru;
2041         channel = scb->dev_channel;
2042         target  = scb->dev_target;
2043
2044         // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout
2045         epthru->timeout         = 4;
2046         epthru->ars             = 1;
2047         epthru->islogical       = 0;
2048         epthru->channel         = 0;
2049         epthru->target          = (channel << 4) | target;
2050         epthru->logdrv          = SCP2LUN(scp);
2051         epthru->reqsenselen     = 14;
2052         epthru->cdblen          = scp->cmd_len;
2053
2054         memcpy(epthru->cdb, scp->cmnd, scp->cmd_len);
2055
2056         if (scsi_bufflen(scp)) {
2057                 epthru->dataxferlen     = scsi_bufflen(scp);
2058                 epthru->dataxferaddr    = ccb->sgl_dma_h;
2059                 epthru->numsge          = megaraid_mbox_mksgl(adapter, scb);
2060         }
2061         else {
2062                 epthru->dataxferaddr    = 0;
2063                 epthru->dataxferlen     = 0;
2064                 epthru->numsge          = 0;
2065         }
2066         return;
2067 }
2068
2069
2070 /**
2071  * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs
2072  * @adapter     : controller's soft state
2073  *
2074  * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the
2075  * completed command and put them on the completed list for later processing.
2076  *
2077  * Returns:     1 if the interrupt is valid, 0 otherwise
2078  */
2079 static int
2080 megaraid_ack_sequence(adapter_t *adapter)
2081 {
2082         mraid_device_t          *raid_dev = ADAP2RAIDDEV(adapter);
2083         mbox_t                  *mbox;
2084         scb_t                   *scb;
2085         uint8_t                 nstatus;
2086         uint8_t                 completed[MBOX_MAX_FIRMWARE_STATUS];
2087         struct list_head        clist;
2088         int                     handled;
2089         uint32_t                dword;
2090         unsigned long           flags;
2091         int                     i, j;
2092
2093
2094         mbox    = raid_dev->mbox;
2095
2096         // move the SCBs from the firmware completed array to our local list
2097         INIT_LIST_HEAD(&clist);
2098
2099         // loop till F/W has more commands for us to complete
2100         handled = 0;
2101         spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags);
2102         do {
2103                 /*
2104                  * Check if a valid interrupt is pending. If found, force the
2105                  * interrupt line low.
2106                  */
2107                 dword = RDOUTDOOR(raid_dev);
2108                 if (dword != 0x10001234) break;
2109
2110                 handled = 1;
2111
2112                 WROUTDOOR(raid_dev, 0x10001234);
2113
2114                 nstatus = 0;
2115                 // wait for valid numstatus to post
2116                 for (i = 0; i < 0xFFFFF; i++) {
2117                         if (mbox->numstatus != 0xFF) {
2118                                 nstatus = mbox->numstatus;
2119                                 break;
2120                         }
2121                         rmb();
2122                 }
2123                 mbox->numstatus = 0xFF;
2124
2125                 adapter->outstanding_cmds -= nstatus;
2126
2127                 for (i = 0; i < nstatus; i++) {
2128
2129                         // wait for valid command index to post
2130                         for (j = 0; j < 0xFFFFF; j++) {
2131                                 if (mbox->completed[i] != 0xFF) break;
2132                                 rmb();
2133                         }
2134                         completed[i]            = mbox->completed[i];
2135                         mbox->completed[i]      = 0xFF;
2136
2137                         if (completed[i] == 0xFF) {
2138                                 con_log(CL_ANN, (KERN_CRIT
2139                                 "megaraid: command posting timed out\n"));
2140
2141                                 BUG();
2142                                 continue;
2143                         }
2144
2145                         // Get SCB associated with this command id
2146                         if (completed[i] >= MBOX_MAX_SCSI_CMDS) {
2147                                 // a cmm command
2148                                 scb = adapter->uscb_list + (completed[i] -
2149                                                 MBOX_MAX_SCSI_CMDS);
2150                         }
2151                         else {
2152                                 // an os command
2153                                 scb = adapter->kscb_list + completed[i];
2154                         }
2155
2156                         scb->status = mbox->status;
2157                         list_add_tail(&scb->list, &clist);
2158                 }
2159
2160                 // Acknowledge interrupt
2161                 WRINDOOR(raid_dev, 0x02);
2162
2163         } while(1);
2164
2165         spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
2166
2167
2168         // put the completed commands in the completed list. DPC would
2169         // complete these commands later
2170         spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2171
2172         list_splice(&clist, &adapter->completed_list);
2173
2174         spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2175
2176
2177         // schedule the DPC if there is some work for it
2178         if (handled)
2179                 tasklet_schedule(&adapter->dpc_h);
2180
2181         return handled;
2182 }
2183
2184
2185 /**
2186  * megaraid_isr - isr for memory based mailbox based controllers
2187  * @irq         : irq
2188  * @devp        : pointer to our soft state
2189  *
2190  * Interrupt service routine for memory-mapped mailbox controllers.
2191  */
2192 static irqreturn_t
2193 megaraid_isr(int irq, void *devp)
2194 {
2195         adapter_t       *adapter = devp;
2196         int             handled;
2197
2198         handled = megaraid_ack_sequence(adapter);
2199
2200         /* Loop through any pending requests */
2201         if (!adapter->quiescent) {
2202                 megaraid_mbox_runpendq(adapter, NULL);
2203         }
2204
2205         return IRQ_RETVAL(handled);
2206 }
2207
2208
2209 /**
2210  * megaraid_mbox_sync_scb - sync kernel buffers
2211  * @adapter     : controller's soft state
2212  * @scb         : pointer to the resource packet
2213  *
2214  * DMA sync if required.
2215  */
2216 static void
2217 megaraid_mbox_sync_scb(adapter_t *adapter, scb_t *scb)
2218 {
2219         mbox_ccb_t      *ccb;
2220
2221         ccb     = (mbox_ccb_t *)scb->ccb;
2222
2223         if (scb->dma_direction == PCI_DMA_FROMDEVICE)
2224                 pci_dma_sync_sg_for_cpu(adapter->pdev,
2225                                         scsi_sglist(scb->scp),
2226                                         scsi_sg_count(scb->scp),
2227                                         PCI_DMA_FROMDEVICE);
2228
2229         scsi_dma_unmap(scb->scp);
2230         return;
2231 }
2232
2233
2234 /**
2235  * megaraid_mbox_dpc - the tasklet to complete the commands from completed list
2236  * @devp        : pointer to HBA soft state
2237  *
2238  * Pick up the commands from the completed list and send back to the owners.
2239  * This is a reentrant function and does not assume any locks are held while
2240  * it is being called.
2241  */
2242 static void
2243 megaraid_mbox_dpc(unsigned long devp)
2244 {
2245         adapter_t               *adapter = (adapter_t *)devp;
2246         mraid_device_t          *raid_dev;
2247         struct list_head        clist;
2248         struct scatterlist      *sgl;
2249         scb_t                   *scb;
2250         scb_t                   *tmp;
2251         struct scsi_cmnd        *scp;
2252         mraid_passthru_t        *pthru;
2253         mraid_epassthru_t       *epthru;
2254         mbox_ccb_t              *ccb;
2255         int                     islogical;
2256         int                     pdev_index;
2257         int                     pdev_state;
2258         mbox_t                  *mbox;
2259         unsigned long           flags;
2260         uint8_t                 c;
2261         int                     status;
2262         uioc_t                  *kioc;
2263
2264
2265         if (!adapter) return;
2266
2267         raid_dev = ADAP2RAIDDEV(adapter);
2268
2269         // move the SCBs from the completed list to our local list
2270         INIT_LIST_HEAD(&clist);
2271
2272         spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2273
2274         list_splice_init(&adapter->completed_list, &clist);
2275
2276         spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2277
2278
2279         list_for_each_entry_safe(scb, tmp, &clist, list) {
2280
2281                 status          = scb->status;
2282                 scp             = scb->scp;
2283                 ccb             = (mbox_ccb_t *)scb->ccb;
2284                 pthru           = ccb->pthru;
2285                 epthru          = ccb->epthru;
2286                 mbox            = ccb->mbox;
2287
2288                 // Make sure f/w has completed a valid command
2289                 if (scb->state != SCB_ISSUED) {
2290                         con_log(CL_ANN, (KERN_CRIT
2291                         "megaraid critical err: invalid command %d:%d:%p\n",
2292                                 scb->sno, scb->state, scp));
2293                         BUG();
2294                         continue;       // Must never happen!
2295                 }
2296
2297                 // check for the management command and complete it right away
2298                 if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
2299                         scb->state      = SCB_FREE;
2300                         scb->status     = status;
2301
2302                         // remove from local clist
2303                         list_del_init(&scb->list);
2304
2305                         kioc                    = (uioc_t *)scb->gp;
2306                         kioc->status            = 0;
2307
2308                         megaraid_mbox_mm_done(adapter, scb);
2309
2310                         continue;
2311                 }
2312
2313                 // Was an abort issued for this command earlier
2314                 if (scb->state & SCB_ABORT) {
2315                         con_log(CL_ANN, (KERN_NOTICE
2316                         "megaraid: aborted cmd %lx[%x] completed\n",
2317                                 scp->serial_number, scb->sno));
2318                 }
2319
2320                 /*
2321                  * If the inquiry came of a disk drive which is not part of
2322                  * any RAID array, expose it to the kernel. For this to be
2323                  * enabled, user must set the "megaraid_expose_unconf_disks"
2324                  * flag to 1 by specifying it on module parameter list.
2325                  * This would enable data migration off drives from other
2326                  * configurations.
2327                  */
2328                 islogical = MRAID_IS_LOGICAL(adapter, scp);
2329                 if (scp->cmnd[0] == INQUIRY && status == 0 && islogical == 0
2330                                 && IS_RAID_CH(raid_dev, scb->dev_channel)) {
2331
2332                         sgl = scsi_sglist(scp);
2333                         if (sg_page(sgl)) {
2334                                 c = *(unsigned char *) sg_virt(&sgl[0]);
2335                         } else {
2336                                 con_log(CL_ANN, (KERN_WARNING
2337                                                  "megaraid mailbox: invalid sg:%d\n",
2338                                                  __LINE__));
2339                                 c = 0;
2340                         }
2341
2342                         if ((c & 0x1F ) == TYPE_DISK) {
2343                                 pdev_index = (scb->dev_channel * 16) +
2344                                         scb->dev_target;
2345                                 pdev_state =
2346                                         raid_dev->pdrv_state[pdev_index] & 0x0F;
2347
2348                                 if (pdev_state == PDRV_ONLINE           ||
2349                                         pdev_state == PDRV_FAILED       ||
2350                                         pdev_state == PDRV_RBLD         ||
2351                                         pdev_state == PDRV_HOTSPARE     ||
2352                                         megaraid_expose_unconf_disks == 0) {
2353
2354                                         status = 0xF0;
2355                                 }
2356                         }
2357                 }
2358
2359                 // Convert MegaRAID status to Linux error code
2360                 switch (status) {
2361
2362                 case 0x00:
2363
2364                         scp->result = (DID_OK << 16);
2365                         break;
2366
2367                 case 0x02:
2368
2369                         /* set sense_buffer and result fields */
2370                         if (mbox->cmd == MBOXCMD_PASSTHRU ||
2371                                 mbox->cmd == MBOXCMD_PASSTHRU64) {
2372
2373                                 memcpy(scp->sense_buffer, pthru->reqsensearea,
2374                                                 14);
2375
2376                                 scp->result = DRIVER_SENSE << 24 |
2377                                         DID_OK << 16 | CHECK_CONDITION << 1;
2378                         }
2379                         else {
2380                                 if (mbox->cmd == MBOXCMD_EXTPTHRU) {
2381
2382                                         memcpy(scp->sense_buffer,
2383                                                 epthru->reqsensearea, 14);
2384
2385                                         scp->result = DRIVER_SENSE << 24 |
2386                                                 DID_OK << 16 |
2387                                                 CHECK_CONDITION << 1;
2388                                 } else {
2389                                         scp->sense_buffer[0] = 0x70;
2390                                         scp->sense_buffer[2] = ABORTED_COMMAND;
2391                                         scp->result = CHECK_CONDITION << 1;
2392                                 }
2393                         }
2394                         break;
2395
2396                 case 0x08:
2397
2398                         scp->result = DID_BUS_BUSY << 16 | status;
2399                         break;
2400
2401                 default:
2402
2403                         /*
2404                          * If TEST_UNIT_READY fails, we know RESERVATION_STATUS
2405                          * failed
2406                          */
2407                         if (scp->cmnd[0] == TEST_UNIT_READY) {
2408                                 scp->result = DID_ERROR << 16 |
2409                                         RESERVATION_CONFLICT << 1;
2410                         }
2411                         else
2412                         /*
2413                          * Error code returned is 1 if Reserve or Release
2414                          * failed or the input parameter is invalid
2415                          */
2416                         if (status == 1 && (scp->cmnd[0] == RESERVE ||
2417                                          scp->cmnd[0] == RELEASE)) {
2418
2419                                 scp->result = DID_ERROR << 16 |
2420                                         RESERVATION_CONFLICT << 1;
2421                         }
2422                         else {
2423                                 scp->result = DID_BAD_TARGET << 16 | status;
2424                         }
2425                 }
2426
2427                 // print a debug message for all failed commands
2428                 if (status) {
2429                         megaraid_mbox_display_scb(adapter, scb);
2430                 }
2431
2432                 // Free our internal resources and call the mid-layer callback
2433                 // routine
2434                 megaraid_mbox_sync_scb(adapter, scb);
2435
2436                 // remove from local clist
2437                 list_del_init(&scb->list);
2438
2439                 // put back in free list
2440                 megaraid_dealloc_scb(adapter, scb);
2441
2442                 // send the scsi packet back to kernel
2443                 scp->scsi_done(scp);
2444         }
2445
2446         return;
2447 }
2448
2449
2450 /**
2451  * megaraid_abort_handler - abort the scsi command
2452  * @scp         : command to be aborted
2453  *
2454  * Abort a previous SCSI request. Only commands on the pending list can be
2455  * aborted. All the commands issued to the F/W must complete.
2456  **/
2457 static int
2458 megaraid_abort_handler(struct scsi_cmnd *scp)
2459 {
2460         adapter_t               *adapter;
2461         mraid_device_t          *raid_dev;
2462         scb_t                   *scb;
2463         scb_t                   *tmp;
2464         int                     found;
2465         unsigned long           flags;
2466         int                     i;
2467
2468
2469         adapter         = SCP2ADAPTER(scp);
2470         raid_dev        = ADAP2RAIDDEV(adapter);
2471
2472         con_log(CL_ANN, (KERN_WARNING
2473                 "megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
2474                 scp->serial_number, scp->cmnd[0], SCP2CHANNEL(scp),
2475                 SCP2TARGET(scp), SCP2LUN(scp)));
2476
2477         // If FW has stopped responding, simply return failure
2478         if (raid_dev->hw_error) {
2479                 con_log(CL_ANN, (KERN_NOTICE
2480                         "megaraid: hw error, not aborting\n"));
2481                 return FAILED;
2482         }
2483
2484         // There might a race here, where the command was completed by the
2485         // firmware and now it is on the completed list. Before we could
2486         // complete the command to the kernel in dpc, the abort came.
2487         // Find out if this is the case to avoid the race.
2488         scb = NULL;
2489         spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2490         list_for_each_entry_safe(scb, tmp, &adapter->completed_list, list) {
2491
2492                 if (scb->scp == scp) {  // Found command
2493
2494                         list_del_init(&scb->list);      // from completed list
2495
2496                         con_log(CL_ANN, (KERN_WARNING
2497                         "megaraid: %ld:%d[%d:%d], abort from completed list\n",
2498                                 scp->serial_number, scb->sno,
2499                                 scb->dev_channel, scb->dev_target));
2500
2501                         scp->result = (DID_ABORT << 16);
2502                         scp->scsi_done(scp);
2503
2504                         megaraid_dealloc_scb(adapter, scb);
2505
2506                         spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter),
2507                                 flags);
2508
2509                         return SUCCESS;
2510                 }
2511         }
2512         spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2513
2514
2515         // Find out if this command is still on the pending list. If it is and
2516         // was never issued, abort and return success. If the command is owned
2517         // by the firmware, we must wait for it to complete by the FW.
2518         spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
2519         list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
2520
2521                 if (scb->scp == scp) {  // Found command
2522
2523                         list_del_init(&scb->list);      // from pending list
2524
2525                         ASSERT(!(scb->state & SCB_ISSUED));
2526
2527                         con_log(CL_ANN, (KERN_WARNING
2528                                 "megaraid abort: %ld[%d:%d], driver owner\n",
2529                                 scp->serial_number, scb->dev_channel,
2530                                 scb->dev_target));
2531
2532                         scp->result = (DID_ABORT << 16);
2533                         scp->scsi_done(scp);
2534
2535                         megaraid_dealloc_scb(adapter, scb);
2536
2537                         spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter),
2538                                 flags);
2539
2540                         return SUCCESS;
2541                 }
2542         }
2543         spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
2544
2545
2546         // Check do we even own this command, in which case this would be
2547         // owned by the firmware. The only way to locate the FW scb is to
2548         // traverse through the list of all SCB, since driver does not
2549         // maintain these SCBs on any list
2550         found = 0;
2551         spin_lock_irq(&adapter->lock);
2552         for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
2553                 scb = adapter->kscb_list + i;
2554
2555                 if (scb->scp == scp) {
2556
2557                         found = 1;
2558
2559                         if (!(scb->state & SCB_ISSUED)) {
2560                                 con_log(CL_ANN, (KERN_WARNING
2561                                 "megaraid abort: %ld%d[%d:%d], invalid state\n",
2562                                 scp->serial_number, scb->sno, scb->dev_channel,
2563                                 scb->dev_target));
2564                                 BUG();
2565                         }
2566                         else {
2567                                 con_log(CL_ANN, (KERN_WARNING
2568                                 "megaraid abort: %ld:%d[%d:%d], fw owner\n",
2569                                 scp->serial_number, scb->sno, scb->dev_channel,
2570                                 scb->dev_target));
2571                         }
2572                 }
2573         }
2574         spin_unlock_irq(&adapter->lock);
2575
2576         if (!found) {
2577                 con_log(CL_ANN, (KERN_WARNING
2578                         "megaraid abort: scsi cmd:%ld, do now own\n",
2579                         scp->serial_number));
2580
2581                 // FIXME: Should there be a callback for this command?
2582                 return SUCCESS;
2583         }
2584
2585         // We cannot actually abort a command owned by firmware, return
2586         // failure and wait for reset. In host reset handler, we will find out
2587         // if the HBA is still live
2588         return FAILED;
2589 }
2590
2591 /**
2592  * megaraid_reset_handler - device reset hadler for mailbox based driver
2593  * @scp         : reference command
2594  *
2595  * Reset handler for the mailbox based controller. First try to find out if
2596  * the FW is still live, in which case the outstanding commands counter mut go
2597  * down to 0. If that happens, also issue the reservation reset command to
2598  * relinquish (possible) reservations on the logical drives connected to this
2599  * host.
2600  **/
2601 static int
2602 megaraid_reset_handler(struct scsi_cmnd *scp)
2603 {
2604         adapter_t       *adapter;
2605         scb_t           *scb;
2606         scb_t           *tmp;
2607         mraid_device_t  *raid_dev;
2608         unsigned long   flags;
2609         uint8_t         raw_mbox[sizeof(mbox_t)];
2610         int             rval;
2611         int             recovery_window;
2612         int             recovering;
2613         int             i;
2614         uioc_t          *kioc;
2615
2616         adapter         = SCP2ADAPTER(scp);
2617         raid_dev        = ADAP2RAIDDEV(adapter);
2618
2619         // return failure if adapter is not responding
2620         if (raid_dev->hw_error) {
2621                 con_log(CL_ANN, (KERN_NOTICE
2622                         "megaraid: hw error, cannot reset\n"));
2623                 return FAILED;
2624         }
2625
2626
2627         // Under exceptional conditions, FW can take up to 3 minutes to
2628         // complete command processing. Wait for additional 2 minutes for the
2629         // pending commands counter to go down to 0. If it doesn't, let the
2630         // controller be marked offline
2631         // Also, reset all the commands currently owned by the driver
2632         spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
2633         list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
2634                 list_del_init(&scb->list);      // from pending list
2635
2636                 if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
2637                         con_log(CL_ANN, (KERN_WARNING
2638                         "megaraid: IOCTL packet with %d[%d:%d] being reset\n",
2639                         scb->sno, scb->dev_channel, scb->dev_target));
2640
2641                         scb->status = -1;
2642
2643                         kioc                    = (uioc_t *)scb->gp;
2644                         kioc->status            = -EFAULT;
2645
2646                         megaraid_mbox_mm_done(adapter, scb);
2647                 } else {
2648                         if (scb->scp == scp) {  // Found command
2649                                 con_log(CL_ANN, (KERN_WARNING
2650                                         "megaraid: %ld:%d[%d:%d], reset from pending list\n",
2651                                         scp->serial_number, scb->sno,
2652                                         scb->dev_channel, scb->dev_target));
2653                         } else {
2654                                 con_log(CL_ANN, (KERN_WARNING
2655                                 "megaraid: IO packet with %d[%d:%d] being reset\n",
2656                                 scb->sno, scb->dev_channel, scb->dev_target));
2657                         }
2658
2659                         scb->scp->result = (DID_RESET << 16);
2660                         scb->scp->scsi_done(scb->scp);
2661
2662                         megaraid_dealloc_scb(adapter, scb);
2663                 }
2664         }
2665         spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
2666
2667         if (adapter->outstanding_cmds) {
2668                 con_log(CL_ANN, (KERN_NOTICE
2669                         "megaraid: %d outstanding commands. Max wait %d sec\n",
2670                         adapter->outstanding_cmds,
2671                         (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT)));
2672         }
2673
2674         recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
2675
2676         recovering = adapter->outstanding_cmds;
2677
2678         for (i = 0; i < recovery_window; i++) {
2679
2680                 megaraid_ack_sequence(adapter);
2681
2682                 // print a message once every 5 seconds only
2683                 if (!(i % 5)) {
2684                         con_log(CL_ANN, (
2685                         "megaraid mbox: Wait for %d commands to complete:%d\n",
2686                                 adapter->outstanding_cmds,
2687                                 (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
2688                 }
2689
2690                 // bailout if no recovery happended in reset time
2691                 if (adapter->outstanding_cmds == 0) {
2692                         break;
2693                 }
2694
2695                 msleep(1000);
2696         }
2697
2698         spin_lock(&adapter->lock);
2699
2700         // If still outstanding commands, bail out
2701         if (adapter->outstanding_cmds) {
2702                 con_log(CL_ANN, (KERN_WARNING
2703                         "megaraid mbox: critical hardware error!\n"));
2704
2705                 raid_dev->hw_error = 1;
2706
2707                 rval = FAILED;
2708                 goto out;
2709         }
2710         else {
2711                 con_log(CL_ANN, (KERN_NOTICE
2712                 "megaraid mbox: reset sequence completed successfully\n"));
2713         }
2714
2715
2716         // If the controller supports clustering, reset reservations
2717         if (!adapter->ha) {
2718                 rval = SUCCESS;
2719                 goto out;
2720         }
2721
2722         // clear reservations if any
2723         raw_mbox[0] = CLUSTER_CMD;
2724         raw_mbox[2] = RESET_RESERVATIONS;
2725
2726         rval = SUCCESS;
2727         if (mbox_post_sync_cmd_fast(adapter, raw_mbox) == 0) {
2728                 con_log(CL_ANN,
2729                         (KERN_INFO "megaraid: reservation reset\n"));
2730         }
2731         else {
2732                 rval = FAILED;
2733                 con_log(CL_ANN, (KERN_WARNING
2734                                 "megaraid: reservation reset failed\n"));
2735         }
2736
2737  out:
2738         spin_unlock_irq(&adapter->lock);
2739         return rval;
2740 }
2741
2742 /*
2743  * START: internal commands library
2744  *
2745  * This section of the driver has the common routine used by the driver and
2746  * also has all the FW routines
2747  */
2748
2749 /**
2750  * mbox_post_sync_cmd() - blocking command to the mailbox based controllers
2751  * @adapter     : controller's soft state
2752  * @raw_mbox    : the mailbox
2753  *
2754  * Issue a scb in synchronous and non-interrupt mode for mailbox based
2755  * controllers.
2756  */
2757 static int
2758 mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[])
2759 {
2760         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
2761         mbox64_t        *mbox64;
2762         mbox_t          *mbox;
2763         uint8_t         status;
2764         int             i;
2765
2766
2767         mbox64  = raid_dev->mbox64;
2768         mbox    = raid_dev->mbox;
2769
2770         /*
2771          * Wait until mailbox is free
2772          */
2773         if (megaraid_busywait_mbox(raid_dev) != 0)
2774                 goto blocked_mailbox;
2775
2776         /*
2777          * Copy mailbox data into host structure
2778          */
2779         memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
2780         mbox->cmdid             = 0xFE;
2781         mbox->busy              = 1;
2782         mbox->poll              = 0;
2783         mbox->ack               = 0;
2784         mbox->numstatus         = 0xFF;
2785         mbox->status            = 0xFF;
2786
2787         wmb();
2788         WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
2789
2790         // wait for maximum 1 second for status to post. If the status is not
2791         // available within 1 second, assume FW is initializing and wait
2792         // for an extended amount of time
2793         if (mbox->numstatus == 0xFF) {  // status not yet available
2794                 udelay(25);
2795
2796                 for (i = 0; mbox->numstatus == 0xFF && i < 1000; i++) {
2797                         rmb();
2798                         msleep(1);
2799                 }
2800
2801
2802                 if (i == 1000) {
2803                         con_log(CL_ANN, (KERN_NOTICE
2804                                 "megaraid mailbox: wait for FW to boot      "));
2805
2806                         for (i = 0; (mbox->numstatus == 0xFF) &&
2807                                         (i < MBOX_RESET_WAIT); i++) {
2808                                 rmb();
2809                                 con_log(CL_ANN, ("\b\b\b\b\b[%03d]",
2810                                                         MBOX_RESET_WAIT - i));
2811                                 msleep(1000);
2812                         }
2813
2814                         if (i == MBOX_RESET_WAIT) {
2815
2816                                 con_log(CL_ANN, (
2817                                 "\nmegaraid mailbox: status not available\n"));
2818
2819                                 return -1;
2820                         }
2821                         con_log(CL_ANN, ("\b\b\b\b\b[ok] \n"));
2822                 }
2823         }
2824
2825         // wait for maximum 1 second for poll semaphore
2826         if (mbox->poll != 0x77) {
2827                 udelay(25);
2828
2829                 for (i = 0; (mbox->poll != 0x77) && (i < 1000); i++) {
2830                         rmb();
2831                         msleep(1);
2832                 }
2833
2834                 if (i == 1000) {
2835                         con_log(CL_ANN, (KERN_WARNING
2836                         "megaraid mailbox: could not get poll semaphore\n"));
2837                         return -1;
2838                 }
2839         }
2840
2841         WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2);
2842         wmb();
2843
2844         // wait for maximum 1 second for acknowledgement
2845         if (RDINDOOR(raid_dev) & 0x2) {
2846                 udelay(25);
2847
2848                 for (i = 0; (RDINDOOR(raid_dev) & 0x2) && (i < 1000); i++) {
2849                         rmb();
2850                         msleep(1);
2851                 }
2852
2853                 if (i == 1000) {
2854                         con_log(CL_ANN, (KERN_WARNING
2855                                 "megaraid mailbox: could not acknowledge\n"));
2856                         return -1;
2857                 }
2858         }
2859         mbox->poll      = 0;
2860         mbox->ack       = 0x77;
2861
2862         status = mbox->status;
2863
2864         // invalidate the completed command id array. After command
2865         // completion, firmware would write the valid id.
2866         mbox->numstatus = 0xFF;
2867         mbox->status    = 0xFF;
2868         for (i = 0; i < MBOX_MAX_FIRMWARE_STATUS; i++) {
2869                 mbox->completed[i] = 0xFF;
2870         }
2871
2872         return status;
2873
2874 blocked_mailbox:
2875
2876         con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n") );
2877         return -1;
2878 }
2879
2880
2881 /**
2882  * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers
2883  * @adapter     : controller's soft state
2884  * @raw_mbox    : the mailbox
2885  *
2886  * Issue a scb in synchronous and non-interrupt mode for mailbox based
2887  * controllers. This is a faster version of the synchronous command and
2888  * therefore can be called in interrupt-context as well.
2889  */
2890 static int
2891 mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
2892 {
2893         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
2894         mbox_t          *mbox;
2895         long            i;
2896
2897
2898         mbox    = raid_dev->mbox;
2899
2900         // return immediately if the mailbox is busy
2901         if (mbox->busy) return -1;
2902
2903         // Copy mailbox data into host structure
2904         memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 14);
2905         mbox->cmdid             = 0xFE;
2906         mbox->busy              = 1;
2907         mbox->poll              = 0;
2908         mbox->ack               = 0;
2909         mbox->numstatus         = 0xFF;
2910         mbox->status            = 0xFF;
2911
2912         wmb();
2913         WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
2914
2915         for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) {
2916                 if (mbox->numstatus != 0xFF) break;
2917                 rmb();
2918                 udelay(MBOX_SYNC_DELAY_200);
2919         }
2920
2921         if (i == MBOX_SYNC_WAIT_CNT) {
2922                 // We may need to re-calibrate the counter
2923                 con_log(CL_ANN, (KERN_CRIT
2924                         "megaraid: fast sync command timed out\n"));
2925         }
2926
2927         WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2);
2928         wmb();
2929
2930         return mbox->status;
2931 }
2932
2933
2934 /**
2935  * megaraid_busywait_mbox() - Wait until the controller's mailbox is available
2936  * @raid_dev    : RAID device (HBA) soft state
2937  *
2938  * Wait until the controller's mailbox is available to accept more commands.
2939  * Wait for at most 1 second.
2940  */
2941 static int
2942 megaraid_busywait_mbox(mraid_device_t *raid_dev)
2943 {
2944         mbox_t  *mbox = raid_dev->mbox;
2945         int     i = 0;
2946
2947         if (mbox->busy) {
2948                 udelay(25);
2949                 for (i = 0; mbox->busy && i < 1000; i++)
2950                         msleep(1);
2951         }
2952
2953         if (i < 1000) return 0;
2954         else return -1;
2955 }
2956
2957
2958 /**
2959  * megaraid_mbox_product_info - some static information about the controller
2960  * @adapter     : our soft state
2961  *
2962  * Issue commands to the controller to grab some parameters required by our
2963  * caller.
2964  */
2965 static int
2966 megaraid_mbox_product_info(adapter_t *adapter)
2967 {
2968         mraid_device_t          *raid_dev = ADAP2RAIDDEV(adapter);
2969         mbox_t                  *mbox;
2970         uint8_t                 raw_mbox[sizeof(mbox_t)];
2971         mraid_pinfo_t           *pinfo;
2972         dma_addr_t              pinfo_dma_h;
2973         mraid_inquiry3_t        *mraid_inq3;
2974         int                     i;
2975
2976
2977         memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
2978         mbox = (mbox_t *)raw_mbox;
2979
2980         /*
2981          * Issue an ENQUIRY3 command to find out certain adapter parameters,
2982          * e.g., max channels, max commands etc.
2983          */
2984         pinfo = pci_alloc_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
2985                         &pinfo_dma_h);
2986
2987         if (pinfo == NULL) {
2988                 con_log(CL_ANN, (KERN_WARNING
2989                         "megaraid: out of memory, %s %d\n", __func__,
2990                         __LINE__));
2991
2992                 return -1;
2993         }
2994         memset(pinfo, 0, sizeof(mraid_pinfo_t));
2995
2996         mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
2997         memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
2998
2999         raw_mbox[0] = FC_NEW_CONFIG;
3000         raw_mbox[2] = NC_SUBOP_ENQUIRY3;
3001         raw_mbox[3] = ENQ3_GET_SOLICITED_FULL;
3002
3003         // Issue the command
3004         if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3005
3006                 con_log(CL_ANN, (KERN_WARNING "megaraid: Inquiry3 failed\n"));
3007
3008                 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
3009                         pinfo, pinfo_dma_h);
3010
3011                 return -1;
3012         }
3013
3014         /*
3015          * Collect information about state of each physical drive
3016          * attached to the controller. We will expose all the disks
3017          * which are not part of RAID
3018          */
3019         mraid_inq3 = (mraid_inquiry3_t *)adapter->ibuf;
3020         for (i = 0; i < MBOX_MAX_PHYSICAL_DRIVES; i++) {
3021                 raid_dev->pdrv_state[i] = mraid_inq3->pdrv_state[i];
3022         }
3023
3024         /*
3025          * Get product info for information like number of channels,
3026          * maximum commands supported.
3027          */
3028         memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3029         mbox->xferaddr = (uint32_t)pinfo_dma_h;
3030
3031         raw_mbox[0] = FC_NEW_CONFIG;
3032         raw_mbox[2] = NC_SUBOP_PRODUCT_INFO;
3033
3034         if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3035
3036                 con_log(CL_ANN, (KERN_WARNING
3037                         "megaraid: product info failed\n"));
3038
3039                 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
3040                         pinfo, pinfo_dma_h);
3041
3042                 return -1;
3043         }
3044
3045         /*
3046          * Setup some parameters for host, as required by our caller
3047          */
3048         adapter->max_channel = pinfo->nchannels;
3049
3050         /*
3051          * we will export all the logical drives on a single channel.
3052          * Add 1 since inquires do not come for inititor ID
3053          */
3054         adapter->max_target     = MAX_LOGICAL_DRIVES_40LD + 1;
3055         adapter->max_lun        = 8;    // up to 8 LUNs for non-disk devices
3056
3057         /*
3058          * These are the maximum outstanding commands for the scsi-layer
3059          */
3060         adapter->max_cmds       = MBOX_MAX_SCSI_CMDS;
3061
3062         memset(adapter->fw_version, 0, VERSION_SIZE);
3063         memset(adapter->bios_version, 0, VERSION_SIZE);
3064
3065         memcpy(adapter->fw_version, pinfo->fw_version, 4);
3066         adapter->fw_version[4] = 0;
3067
3068         memcpy(adapter->bios_version, pinfo->bios_version, 4);
3069         adapter->bios_version[4] = 0;
3070
3071         con_log(CL_ANN, (KERN_NOTICE
3072                 "megaraid: fw version:[%s] bios version:[%s]\n",
3073                 adapter->fw_version, adapter->bios_version));
3074
3075         pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t), pinfo,
3076                         pinfo_dma_h);
3077
3078         return 0;
3079 }
3080
3081
3082
3083 /**
3084  * megaraid_mbox_extended_cdb - check for support for extended CDBs
3085  * @adapter     : soft state for the controller
3086  *
3087  * This routine check whether the controller in question supports extended
3088  * ( > 10 bytes ) CDBs.
3089  */
3090 static int
3091 megaraid_mbox_extended_cdb(adapter_t *adapter)
3092 {
3093         mbox_t          *mbox;
3094         uint8_t         raw_mbox[sizeof(mbox_t)];
3095         int             rval;
3096
3097         mbox = (mbox_t *)raw_mbox;
3098
3099         memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3100         mbox->xferaddr  = (uint32_t)adapter->ibuf_dma_h;
3101
3102         memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3103
3104         raw_mbox[0] = MAIN_MISC_OPCODE;
3105         raw_mbox[2] = SUPPORT_EXT_CDB;
3106
3107         /*
3108          * Issue the command
3109          */
3110         rval = 0;
3111         if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3112                 rval = -1;
3113         }
3114
3115         return rval;
3116 }
3117
3118
3119 /**
3120  * megaraid_mbox_support_ha - Do we support clustering
3121  * @adapter     : soft state for the controller
3122  * @init_id     : ID of the initiator
3123  *
3124  * Determine if the firmware supports clustering and the ID of the initiator.
3125  */
3126 static int
3127 megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id)
3128 {
3129         mbox_t          *mbox;
3130         uint8_t         raw_mbox[sizeof(mbox_t)];
3131         int             rval;
3132
3133
3134         mbox = (mbox_t *)raw_mbox;
3135
3136         memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3137
3138         mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3139
3140         memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3141
3142         raw_mbox[0] = GET_TARGET_ID;
3143
3144         // Issue the command
3145         *init_id = 7;
3146         rval =  -1;
3147         if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3148
3149                 *init_id = *(uint8_t *)adapter->ibuf;
3150
3151                 con_log(CL_ANN, (KERN_INFO
3152                         "megaraid: cluster firmware, initiator ID: %d\n",
3153                         *init_id));
3154
3155                 rval =  0;
3156         }
3157
3158         return rval;
3159 }
3160
3161
3162 /**
3163  * megaraid_mbox_support_random_del - Do we support random deletion
3164  * @adapter     : soft state for the controller
3165  *
3166  * Determine if the firmware supports random deletion.
3167  * Return:      1 is operation supported, 0 otherwise
3168  */
3169 static int
3170 megaraid_mbox_support_random_del(adapter_t *adapter)
3171 {
3172         mbox_t          *mbox;
3173         uint8_t         raw_mbox[sizeof(mbox_t)];
3174         int             rval;
3175
3176         /*
3177          * Newer firmware on Dell CERC expect a different
3178          * random deletion handling, so disable it.
3179          */
3180         if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
3181             adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
3182             adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
3183             adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
3184             (adapter->fw_version[0] > '6' ||
3185              (adapter->fw_version[0] == '6' &&
3186               adapter->fw_version[2] > '6') ||
3187              (adapter->fw_version[0] == '6'
3188               && adapter->fw_version[2] == '6'
3189               && adapter->fw_version[3] > '1'))) {
3190                 con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
3191                 return 0;
3192         }
3193
3194         mbox = (mbox_t *)raw_mbox;
3195
3196         memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3197
3198         raw_mbox[0] = FC_DEL_LOGDRV;
3199         raw_mbox[2] = OP_SUP_DEL_LOGDRV;
3200
3201         // Issue the command
3202         rval = 0;
3203         if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3204
3205                 con_log(CL_DLEVEL1, ("megaraid: supports random deletion\n"));
3206
3207                 rval =  1;
3208         }
3209
3210         return rval;
3211 }
3212
3213
3214 /**
3215  * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware
3216  * @adapter     : soft state for the controller
3217  *
3218  * Find out the maximum number of scatter-gather elements supported by the
3219  * firmware.
3220  */
3221 static int
3222 megaraid_mbox_get_max_sg(adapter_t *adapter)
3223 {
3224         mbox_t          *mbox;
3225         uint8_t         raw_mbox[sizeof(mbox_t)];
3226         int             nsg;
3227
3228
3229         mbox = (mbox_t *)raw_mbox;
3230
3231         memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3232
3233         mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3234
3235         memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3236
3237         raw_mbox[0] = MAIN_MISC_OPCODE;
3238         raw_mbox[2] = GET_MAX_SG_SUPPORT;
3239
3240         // Issue the command
3241         if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3242                 nsg =  *(uint8_t *)adapter->ibuf;
3243         }
3244         else {
3245                 nsg =  MBOX_DEFAULT_SG_SIZE;
3246         }
3247
3248         if (nsg > MBOX_MAX_SG_SIZE) nsg = MBOX_MAX_SG_SIZE;
3249
3250         return nsg;
3251 }
3252
3253
3254 /**
3255  * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels
3256  * @adapter     : soft state for the controller
3257  *
3258  * Enumerate the RAID and SCSI channels for ROMB platforms so that channels
3259  * can be exported as regular SCSI channels.
3260  */
3261 static void
3262 megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
3263 {
3264         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3265         mbox_t          *mbox;
3266         uint8_t         raw_mbox[sizeof(mbox_t)];
3267
3268
3269         mbox = (mbox_t *)raw_mbox;
3270
3271         memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3272
3273         mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3274
3275         memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3276
3277         raw_mbox[0] = CHNL_CLASS;
3278         raw_mbox[2] = GET_CHNL_CLASS;
3279
3280         // Issue the command. If the command fails, all channels are RAID
3281         // channels
3282         raid_dev->channel_class = 0xFF;
3283         if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3284                 raid_dev->channel_class =  *(uint8_t *)adapter->ibuf;
3285         }
3286
3287         return;
3288 }
3289
3290
3291 /**
3292  * megaraid_mbox_flush_cache - flush adapter and disks cache
3293  * @adapter             : soft state for the controller
3294  *
3295  * Flush adapter cache followed by disks cache.
3296  */
3297 static void
3298 megaraid_mbox_flush_cache(adapter_t *adapter)
3299 {
3300         mbox_t  *mbox;
3301         uint8_t raw_mbox[sizeof(mbox_t)];
3302
3303
3304         mbox = (mbox_t *)raw_mbox;
3305
3306         memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3307
3308         raw_mbox[0] = FLUSH_ADAPTER;
3309
3310         if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3311                 con_log(CL_ANN, ("megaraid: flush adapter failed\n"));
3312         }
3313
3314         raw_mbox[0] = FLUSH_SYSTEM;
3315
3316         if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3317                 con_log(CL_ANN, ("megaraid: flush disks cache failed\n"));
3318         }
3319
3320         return;
3321 }
3322
3323
3324 /**
3325  * megaraid_mbox_fire_sync_cmd - fire the sync cmd
3326  * @adapter             : soft state for the controller
3327  *
3328  * Clears the pending cmds in FW and reinits its RAID structs.
3329  */
3330 static int
3331 megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
3332 {
3333         mbox_t  *mbox;
3334         uint8_t raw_mbox[sizeof(mbox_t)];
3335         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3336         mbox64_t *mbox64;
3337         int     status = 0;
3338         int i;
3339         uint32_t dword;
3340
3341         mbox = (mbox_t *)raw_mbox;
3342
3343         memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3344
3345         raw_mbox[0] = 0xFF;
3346
3347         mbox64  = raid_dev->mbox64;
3348         mbox    = raid_dev->mbox;
3349
3350         /* Wait until mailbox is free */
3351         if (megaraid_busywait_mbox(raid_dev) != 0) {
3352                 status = 1;
3353                 goto blocked_mailbox;
3354         }
3355
3356         /* Copy mailbox data into host structure */
3357         memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
3358         mbox->cmdid             = 0xFE;
3359         mbox->busy              = 1;
3360         mbox->poll              = 0;
3361         mbox->ack               = 0;
3362         mbox->numstatus         = 0;
3363         mbox->status            = 0;
3364
3365         wmb();
3366         WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
3367
3368         /* Wait for maximum 1 min for status to post.
3369          * If the Firmware SUPPORTS the ABOVE COMMAND,
3370          * mbox->cmd will be set to 0
3371          * else
3372          * the firmware will reject the command with
3373          * mbox->numstatus set to 1
3374          */
3375
3376         i = 0;
3377         status = 0;
3378         while (!mbox->numstatus && mbox->cmd == 0xFF) {
3379                 rmb();
3380                 msleep(1);
3381                 i++;
3382                 if (i > 1000 * 60) {
3383                         status = 1;
3384                         break;
3385                 }
3386         }
3387         if (mbox->numstatus == 1)
3388                 status = 1; /*cmd not supported*/
3389
3390         /* Check for interrupt line */
3391         dword = RDOUTDOOR(raid_dev);
3392         WROUTDOOR(raid_dev, dword);
3393         WRINDOOR(raid_dev,2);
3394
3395         return status;
3396
3397 blocked_mailbox:
3398         con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
3399         return status;
3400 }
3401
3402 /**
3403  * megaraid_mbox_display_scb - display SCB information, mostly debug purposes
3404  * @adapter             : controller's soft state
3405  * @scb                 : SCB to be displayed
3406  * @level               : debug level for console print
3407  *
3408  * Diplay information about the given SCB iff the current debug level is
3409  * verbose.
3410  */
3411 static void
3412 megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
3413 {
3414         mbox_ccb_t              *ccb;
3415         struct scsi_cmnd        *scp;
3416         mbox_t                  *mbox;
3417         int                     level;
3418         int                     i;
3419
3420
3421         ccb     = (mbox_ccb_t *)scb->ccb;
3422         scp     = scb->scp;
3423         mbox    = ccb->mbox;
3424
3425         level = CL_DLEVEL3;
3426
3427         con_log(level, (KERN_NOTICE
3428                 "megaraid mailbox: status:%#x cmd:%#x id:%#x ", scb->status,
3429                 mbox->cmd, scb->sno));
3430
3431         con_log(level, ("sec:%#x lba:%#x addr:%#x ld:%d sg:%d\n",
3432                 mbox->numsectors, mbox->lba, mbox->xferaddr, mbox->logdrv,
3433                 mbox->numsge));
3434
3435         if (!scp) return;
3436
3437         con_log(level, (KERN_NOTICE "scsi cmnd: "));
3438
3439         for (i = 0; i < scp->cmd_len; i++) {
3440                 con_log(level, ("%#2.02x ", scp->cmnd[i]));
3441         }
3442
3443         con_log(level, ("\n"));
3444
3445         return;
3446 }
3447
3448
3449 /**
3450  * megaraid_mbox_setup_device_map - manage device ids
3451  * @adapter     : Driver's soft state
3452  *
3453  * Manange the device ids to have an appropraite mapping between the kernel
3454  * scsi addresses and megaraid scsi and logical drive addresses. We export
3455  * scsi devices on their actual addresses, whereas the logical drives are
3456  * exported on a virtual scsi channel.
3457  */
3458 static void
3459 megaraid_mbox_setup_device_map(adapter_t *adapter)
3460 {
3461         uint8_t         c;
3462         uint8_t         t;
3463
3464         /*
3465          * First fill the values on the logical drive channel
3466          */
3467         for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++)
3468                 adapter->device_ids[adapter->max_channel][t] =
3469                         (t < adapter->init_id) ?  t : t - 1;
3470
3471         adapter->device_ids[adapter->max_channel][adapter->init_id] = 0xFF;
3472
3473         /*
3474          * Fill the values on the physical devices channels
3475          */
3476         for (c = 0; c < adapter->max_channel; c++)
3477                 for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++)
3478                         adapter->device_ids[c][t] = (c << 8) | t;
3479 }
3480
3481
3482 /*
3483  * END: internal commands library
3484  */
3485
3486 /*
3487  * START: Interface for the common management module
3488  *
3489  * This is the module, which interfaces with the common management module to
3490  * provide support for ioctl and sysfs
3491  */
3492
3493 /**
3494  * megaraid_cmm_register - register with the management module
3495  * @adapter             : HBA soft state
3496  *
3497  * Register with the management module, which allows applications to issue
3498  * ioctl calls to the drivers. This interface is used by the management module
3499  * to setup sysfs support as well.
3500  */
3501 static int
3502 megaraid_cmm_register(adapter_t *adapter)
3503 {
3504         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3505         mraid_mmadp_t   adp;
3506         scb_t           *scb;
3507         mbox_ccb_t      *ccb;
3508         int             rval;
3509         int             i;
3510
3511         // Allocate memory for the base list of scb for management module.
3512         adapter->uscb_list = kcalloc(MBOX_MAX_USER_CMDS, sizeof(scb_t), GFP_KERNEL);
3513
3514         if (adapter->uscb_list == NULL) {
3515                 con_log(CL_ANN, (KERN_WARNING
3516                         "megaraid: out of memory, %s %d\n", __func__,
3517                         __LINE__));
3518                 return -1;
3519         }
3520
3521
3522         // Initialize the synchronization parameters for resources for
3523         // commands for management module
3524         INIT_LIST_HEAD(&adapter->uscb_pool);
3525
3526         spin_lock_init(USER_FREE_LIST_LOCK(adapter));
3527
3528
3529
3530         // link all the packets. Note, CCB for commands, coming from the
3531         // commom management module, mailbox physical address are already
3532         // setup by it. We just need placeholder for that in our local command
3533         // control blocks
3534         for (i = 0; i < MBOX_MAX_USER_CMDS; i++) {
3535
3536                 scb                     = adapter->uscb_list + i;
3537                 ccb                     = raid_dev->uccb_list + i;
3538
3539                 scb->ccb                = (caddr_t)ccb;
3540                 ccb->mbox64             = raid_dev->umbox64 + i;
3541                 ccb->mbox               = &ccb->mbox64->mbox32;
3542                 ccb->raw_mbox           = (uint8_t *)ccb->mbox;
3543
3544                 scb->gp                 = 0;
3545
3546                 // COMMAND ID 0 - (MBOX_MAX_SCSI_CMDS-1) ARE RESERVED FOR
3547                 // COMMANDS COMING FROM IO SUBSYSTEM (MID-LAYER)
3548                 scb->sno                = i + MBOX_MAX_SCSI_CMDS;
3549
3550                 scb->scp                = NULL;
3551                 scb->state              = SCB_FREE;
3552                 scb->dma_direction      = PCI_DMA_NONE;
3553                 scb->dma_type           = MRAID_DMA_NONE;
3554                 scb->dev_channel        = -1;
3555                 scb->dev_target         = -1;
3556
3557                 // put scb in the free pool
3558                 list_add_tail(&scb->list, &adapter->uscb_pool);
3559         }
3560
3561         adp.unique_id           = adapter->unique_id;
3562         adp.drvr_type           = DRVRTYPE_MBOX;
3563         adp.drvr_data           = (unsigned long)adapter;
3564         adp.pdev                = adapter->pdev;
3565         adp.issue_uioc          = megaraid_mbox_mm_handler;
3566         adp.timeout             = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
3567         adp.max_kioc            = MBOX_MAX_USER_CMDS;
3568
3569         if ((rval = mraid_mm_register_adp(&adp)) != 0) {
3570
3571                 con_log(CL_ANN, (KERN_WARNING
3572                         "megaraid mbox: did not register with CMM\n"));
3573
3574                 kfree(adapter->uscb_list);
3575         }
3576
3577         return rval;
3578 }
3579
3580
3581 /**
3582  * megaraid_cmm_unregister - un-register with the management module
3583  * @adapter             : HBA soft state
3584  *
3585  * Un-register with the management module.
3586  * FIXME: mgmt module must return failure for unregister if it has pending
3587  * commands in LLD.
3588  */
3589 static int
3590 megaraid_cmm_unregister(adapter_t *adapter)
3591 {
3592         kfree(adapter->uscb_list);
3593         mraid_mm_unregister_adp(adapter->unique_id);
3594         return 0;
3595 }
3596
3597
3598 /**
3599  * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD
3600  * @drvr_data           : LLD specific data
3601  * @kioc                : CMM interface packet
3602  * @action              : command action
3603  *
3604  * This routine is invoked whenever the Common Management Module (CMM) has a
3605  * command for us. The 'action' parameter specifies if this is a new command
3606  * or otherwise.
3607  */
3608 static int
3609 megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action)
3610 {
3611         adapter_t *adapter;
3612
3613         if (action != IOCTL_ISSUE) {
3614                 con_log(CL_ANN, (KERN_WARNING
3615                         "megaraid: unsupported management action:%#2x\n",
3616                         action));
3617                 return (-ENOTSUPP);
3618         }
3619
3620         adapter = (adapter_t *)drvr_data;
3621
3622         // make sure this adapter is not being detached right now.
3623         if (atomic_read(&adapter->being_detached)) {
3624                 con_log(CL_ANN, (KERN_WARNING
3625                         "megaraid: reject management request, detaching\n"));
3626                 return (-ENODEV);
3627         }
3628
3629         switch (kioc->opcode) {
3630
3631         case GET_ADAP_INFO:
3632
3633                 kioc->status =  gather_hbainfo(adapter, (mraid_hba_info_t *)
3634                                         (unsigned long)kioc->buf_vaddr);
3635
3636                 kioc->done(kioc);
3637
3638                 return kioc->status;
3639
3640         case MBOX_CMD:
3641
3642                 return megaraid_mbox_mm_command(adapter, kioc);
3643
3644         default:
3645                 kioc->status = (-EINVAL);
3646                 kioc->done(kioc);
3647                 return (-EINVAL);
3648         }
3649
3650         return 0;       // not reached
3651 }
3652
3653 /**
3654  * megaraid_mbox_mm_command - issues commands routed through CMM
3655  * @adapter             : HBA soft state
3656  * @kioc                : management command packet
3657  *
3658  * Issues commands, which are routed through the management module.
3659  */
3660 static int
3661 megaraid_mbox_mm_command(adapter_t *adapter, uioc_t *kioc)
3662 {
3663         struct list_head        *head = &adapter->uscb_pool;
3664         mbox64_t                *mbox64;
3665         uint8_t                 *raw_mbox;
3666         scb_t                   *scb;
3667         mbox_ccb_t              *ccb;
3668         unsigned long           flags;
3669
3670         // detach one scb from free pool
3671         spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags);
3672
3673         if (list_empty(head)) { // should never happen because of CMM
3674
3675                 con_log(CL_ANN, (KERN_WARNING
3676                         "megaraid mbox: bug in cmm handler, lost resources\n"));
3677
3678                 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3679
3680                 return (-EINVAL);
3681         }
3682
3683         scb = list_entry(head->next, scb_t, list);
3684         list_del_init(&scb->list);
3685
3686         spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3687
3688         scb->state              = SCB_ACTIVE;
3689         scb->dma_type           = MRAID_DMA_NONE;
3690         scb->dma_direction      = PCI_DMA_NONE;
3691
3692         ccb             = (mbox_ccb_t *)scb->ccb;
3693         mbox64          = (mbox64_t *)(unsigned long)kioc->cmdbuf;
3694         raw_mbox        = (uint8_t *)&mbox64->mbox32;
3695
3696         memcpy(ccb->mbox64, mbox64, sizeof(mbox64_t));
3697
3698         scb->gp         = (unsigned long)kioc;
3699
3700         /*
3701          * If it is a logdrv random delete operation, we have to wait till
3702          * there are no outstanding cmds at the fw and then issue it directly
3703          */
3704         if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) {
3705
3706                 if (wait_till_fw_empty(adapter)) {
3707                         con_log(CL_ANN, (KERN_NOTICE
3708                                 "megaraid mbox: LD delete, timed out\n"));
3709
3710                         kioc->status = -ETIME;
3711
3712                         scb->status = -1;
3713
3714                         megaraid_mbox_mm_done(adapter, scb);
3715
3716                         return (-ETIME);
3717                 }
3718
3719                 INIT_LIST_HEAD(&scb->list);
3720
3721                 scb->state = SCB_ISSUED;
3722                 if (mbox_post_cmd(adapter, scb) != 0) {
3723
3724                         con_log(CL_ANN, (KERN_NOTICE
3725                                 "megaraid mbox: LD delete, mailbox busy\n"));
3726
3727                         kioc->status = -EBUSY;
3728
3729                         scb->status = -1;
3730
3731                         megaraid_mbox_mm_done(adapter, scb);
3732
3733                         return (-EBUSY);
3734                 }
3735
3736                 return 0;
3737         }
3738
3739         // put the command on the pending list and execute
3740         megaraid_mbox_runpendq(adapter, scb);
3741
3742         return 0;
3743 }
3744
3745
3746 static int
3747 wait_till_fw_empty(adapter_t *adapter)
3748 {
3749         unsigned long   flags = 0;
3750         int             i;
3751
3752
3753         /*
3754          * Set the quiescent flag to stop issuing cmds to FW.
3755          */
3756         spin_lock_irqsave(&adapter->lock, flags);
3757         adapter->quiescent++;
3758         spin_unlock_irqrestore(&adapter->lock, flags);
3759
3760         /*
3761          * Wait till there are no more cmds outstanding at FW. Try for at most
3762          * 60 seconds
3763          */
3764         for (i = 0; i < 60 && adapter->outstanding_cmds; i++) {
3765                 con_log(CL_DLEVEL1, (KERN_INFO
3766                         "megaraid: FW has %d pending commands\n",
3767                         adapter->outstanding_cmds));
3768
3769                 msleep(1000);
3770         }
3771
3772         return adapter->outstanding_cmds;
3773 }
3774
3775
3776 /**
3777  * megaraid_mbox_mm_done - callback for CMM commands
3778  * @adapter     : HBA soft state
3779  * @scb         : completed command
3780  *
3781  * Callback routine for internal commands originated from the management
3782  * module.
3783  */
3784 static void
3785 megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
3786 {
3787         uioc_t                  *kioc;
3788         mbox64_t                *mbox64;
3789         uint8_t                 *raw_mbox;
3790         unsigned long           flags;
3791
3792         kioc                    = (uioc_t *)scb->gp;
3793         mbox64                  = (mbox64_t *)(unsigned long)kioc->cmdbuf;
3794         mbox64->mbox32.status   = scb->status;
3795         raw_mbox                = (uint8_t *)&mbox64->mbox32;
3796
3797
3798         // put scb in the free pool
3799         scb->state      = SCB_FREE;
3800         scb->scp        = NULL;
3801
3802         spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags);
3803
3804         list_add(&scb->list, &adapter->uscb_pool);
3805
3806         spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3807
3808         // if a delete logical drive operation succeeded, restart the
3809         // controller
3810         if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) {
3811
3812                 adapter->quiescent--;
3813
3814                 megaraid_mbox_runpendq(adapter, NULL);
3815         }
3816
3817         kioc->done(kioc);
3818
3819         return;
3820 }
3821
3822
3823 /**
3824  * gather_hbainfo - HBA characteristics for the applications
3825  * @adapter             : HBA soft state
3826  * @hinfo               : pointer to the caller's host info strucuture
3827  */
3828 static int
3829 gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
3830 {
3831         uint8_t dmajor;
3832
3833         dmajor                  = megaraid_mbox_version[0];
3834
3835         hinfo->pci_vendor_id    = adapter->pdev->vendor;
3836         hinfo->pci_device_id    = adapter->pdev->device;
3837         hinfo->subsys_vendor_id = adapter->pdev->subsystem_vendor;
3838         hinfo->subsys_device_id = adapter->pdev->subsystem_device;
3839
3840         hinfo->pci_bus          = adapter->pdev->bus->number;
3841         hinfo->pci_dev_fn       = adapter->pdev->devfn;
3842         hinfo->pci_slot         = PCI_SLOT(adapter->pdev->devfn);
3843         hinfo->irq              = adapter->host->irq;
3844         hinfo->baseport         = ADAP2RAIDDEV(adapter)->baseport;
3845
3846         hinfo->unique_id        = (hinfo->pci_bus << 8) | adapter->pdev->devfn;
3847         hinfo->host_no          = adapter->host->host_no;
3848
3849         return 0;
3850 }
3851
3852 /*
3853  * END: Interface for the common management module
3854  */
3855
3856
3857
3858 /**
3859  * megaraid_sysfs_alloc_resources - allocate sysfs related resources
3860  * @adapter     : controller's soft state
3861  *
3862  * Allocate packets required to issue FW calls whenever the sysfs attributes
3863  * are read. These attributes would require up-to-date information from the
3864  * FW. Also set up resources for mutual exclusion to share these resources and
3865  * the wait queue.
3866  *
3867  * Return 0 on success.
3868  * Return -ERROR_CODE on failure.
3869  */
3870 static int
3871 megaraid_sysfs_alloc_resources(adapter_t *adapter)
3872 {
3873         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3874         int             rval = 0;
3875
3876         raid_dev->sysfs_uioc = kmalloc(sizeof(uioc_t), GFP_KERNEL);
3877
3878         raid_dev->sysfs_mbox64 = kmalloc(sizeof(mbox64_t), GFP_KERNEL);
3879
3880         raid_dev->sysfs_buffer = pci_alloc_consistent(adapter->pdev,
3881                         PAGE_SIZE, &raid_dev->sysfs_buffer_dma);
3882
3883         if (!raid_dev->sysfs_uioc || !raid_dev->sysfs_mbox64 ||
3884                 !raid_dev->sysfs_buffer) {
3885
3886                 con_log(CL_ANN, (KERN_WARNING
3887                         "megaraid: out of memory, %s %d\n", __func__,
3888                         __LINE__));
3889
3890                 rval = -ENOMEM;
3891
3892                 megaraid_sysfs_free_resources(adapter);
3893         }
3894
3895         mutex_init(&raid_dev->sysfs_mtx);
3896
3897         init_waitqueue_head(&raid_dev->sysfs_wait_q);
3898
3899         return rval;
3900 }
3901
3902
3903 /**
3904  * megaraid_sysfs_free_resources - free sysfs related resources
3905  * @adapter     : controller's soft state
3906  *
3907  * Free packets allocated for sysfs FW commands
3908  */
3909 static void
3910 megaraid_sysfs_free_resources(adapter_t *adapter)
3911 {
3912         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3913
3914         kfree(raid_dev->sysfs_uioc);
3915         kfree(raid_dev->sysfs_mbox64);
3916
3917         if (raid_dev->sysfs_buffer) {
3918                 pci_free_consistent(adapter->pdev, PAGE_SIZE,
3919                         raid_dev->sysfs_buffer, raid_dev->sysfs_buffer_dma);
3920         }
3921 }
3922
3923
3924 /**
3925  * megaraid_sysfs_get_ldmap_done - callback for get ldmap
3926  * @uioc        : completed packet
3927  *
3928  * Callback routine called in the ISR/tasklet context for get ldmap call
3929  */
3930 static void
3931 megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
3932 {
3933         adapter_t       *adapter = (adapter_t *)uioc->buf_vaddr;
3934         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3935
3936         uioc->status = 0;
3937
3938         wake_up(&raid_dev->sysfs_wait_q);
3939 }
3940
3941
3942 /**
3943  * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap
3944  * @data        : timed out packet
3945  *
3946  * Timeout routine to recover and return to application, in case the adapter
3947  * has stopped responding. A timeout of 60 seconds for this command seems like
3948  * a good value.
3949  */
3950 static void
3951 megaraid_sysfs_get_ldmap_timeout(unsigned long data)
3952 {
3953         uioc_t          *uioc = (uioc_t *)data;
3954         adapter_t       *adapter = (adapter_t *)uioc->buf_vaddr;
3955         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
3956
3957         uioc->status = -ETIME;
3958
3959         wake_up(&raid_dev->sysfs_wait_q);
3960 }
3961
3962
3963 /**
3964  * megaraid_sysfs_get_ldmap - get update logical drive map
3965  * @adapter     : controller's soft state
3966  *
3967  * This routine will be called whenever user reads the logical drive
3968  * attributes, go get the current logical drive mapping table from the
3969  * firmware. We use the management API's to issue commands to the controller.
3970  *
3971  * NOTE: The commands issuance functionality is not generalized and
3972  * implemented in context of "get ld map" command only. If required, the
3973  * command issuance logical can be trivially pulled out and implemented as a
3974  * standalone libary. For now, this should suffice since there is no other
3975  * user of this interface.
3976  *
3977  * Return 0 on success.
3978  * Return -1 on failure.
3979  */
3980 static int
3981 megaraid_sysfs_get_ldmap(adapter_t *adapter)
3982 {
3983         mraid_device_t          *raid_dev = ADAP2RAIDDEV(adapter);
3984         uioc_t                  *uioc;
3985         mbox64_t                *mbox64;
3986         mbox_t                  *mbox;
3987         char                    *raw_mbox;
3988         struct timer_list       sysfs_timer;
3989         struct timer_list       *timerp;
3990         caddr_t                 ldmap;
3991         int                     rval = 0;
3992
3993         /*
3994          * Allow only one read at a time to go through the sysfs attributes
3995          */
3996         mutex_lock(&raid_dev->sysfs_mtx);
3997
3998         uioc    = raid_dev->sysfs_uioc;
3999         mbox64  = raid_dev->sysfs_mbox64;
4000         ldmap   = raid_dev->sysfs_buffer;
4001
4002         memset(uioc, 0, sizeof(uioc_t));
4003         memset(mbox64, 0, sizeof(mbox64_t));
4004         memset(ldmap, 0, sizeof(raid_dev->curr_ldmap));
4005
4006         mbox            = &mbox64->mbox32;
4007         raw_mbox        = (char *)mbox;
4008         uioc->cmdbuf    = (uint64_t)(unsigned long)mbox64;
4009         uioc->buf_vaddr = (caddr_t)adapter;
4010         uioc->status    = -ENODATA;
4011         uioc->done      = megaraid_sysfs_get_ldmap_done;
4012
4013         /*
4014          * Prepare the mailbox packet to get the current logical drive mapping
4015          * table
4016          */
4017         mbox->xferaddr = (uint32_t)raid_dev->sysfs_buffer_dma;
4018
4019         raw_mbox[0] = FC_DEL_LOGDRV;
4020         raw_mbox[2] = OP_GET_LDID_MAP;
4021
4022         /*
4023          * Setup a timer to recover from a non-responding controller
4024          */
4025         timerp  = &sysfs_timer;
4026         init_timer(timerp);
4027
4028         timerp->function        = megaraid_sysfs_get_ldmap_timeout;
4029         timerp->data            = (unsigned long)uioc;
4030         timerp->expires         = jiffies + 60 * HZ;
4031
4032         add_timer(timerp);
4033
4034         /*
4035          * Send the command to the firmware
4036          */
4037         rval = megaraid_mbox_mm_command(adapter, uioc);
4038
4039         if (rval == 0) {        // command successfully issued
4040                 wait_event(raid_dev->sysfs_wait_q, (uioc->status != -ENODATA));
4041
4042                 /*
4043                  * Check if the command timed out
4044                  */
4045                 if (uioc->status == -ETIME) {
4046                         con_log(CL_ANN, (KERN_NOTICE
4047                                 "megaraid: sysfs get ld map timed out\n"));
4048
4049                         rval = -ETIME;
4050                 }
4051                 else {
4052                         rval = mbox->status;
4053                 }
4054
4055                 if (rval == 0) {
4056                         memcpy(raid_dev->curr_ldmap, ldmap,
4057                                 sizeof(raid_dev->curr_ldmap));
4058                 }
4059                 else {
4060                         con_log(CL_ANN, (KERN_NOTICE
4061                                 "megaraid: get ld map failed with %x\n", rval));
4062                 }
4063         }
4064         else {
4065                 con_log(CL_ANN, (KERN_NOTICE
4066                         "megaraid: could not issue ldmap command:%x\n", rval));
4067         }
4068
4069
4070         del_timer_sync(timerp);
4071
4072         mutex_unlock(&raid_dev->sysfs_mtx);
4073
4074         return rval;
4075 }
4076
4077
4078 /**
4079  * megaraid_sysfs_show_app_hndl - display application handle for this adapter
4080  * @cdev        : class device object representation for the host
4081  * @buf         : buffer to send data to
4082  *
4083  * Display the handle used by the applications while executing management
4084  * tasks on the adapter. We invoke a management module API to get the adapter
4085  * handle, since we do not interface with applications directly.
4086  */
4087 static ssize_t
4088 megaraid_sysfs_show_app_hndl(struct device *dev, struct device_attribute *attr,
4089                              char *buf)
4090 {
4091         struct Scsi_Host *shost = class_to_shost(dev);
4092         adapter_t       *adapter = (adapter_t *)SCSIHOST2ADAP(shost);
4093         uint32_t        app_hndl;
4094
4095         app_hndl = mraid_mm_adapter_app_handle(adapter->unique_id);
4096
4097         return snprintf(buf, 8, "%u\n", app_hndl);
4098 }
4099
4100
4101 /**
4102  * megaraid_sysfs_show_ldnum - display the logical drive number for this device
4103  * @dev         : device object representation for the scsi device
4104  * @attr        : device attribute to show
4105  * @buf         : buffer to send data to
4106  *
4107  * Display the logical drive number for the device in question, if it a valid
4108  * logical drive. For physical devices, "-1" is returned.
4109  *
4110  * The logical drive number is displayed in following format:
4111  *
4112  * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE>
4113  *
4114  *   <int>     <int>       <int>            <int>
4115  */
4116 static ssize_t
4117 megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf)
4118 {
4119         struct scsi_device *sdev = to_scsi_device(dev);
4120         adapter_t       *adapter = (adapter_t *)SCSIHOST2ADAP(sdev->host);
4121         mraid_device_t  *raid_dev = ADAP2RAIDDEV(adapter);
4122         int             scsi_id = -1;
4123         int             logical_drv = -1;
4124         int             ldid_map = -1;
4125         uint32_t        app_hndl = 0;
4126         int             mapped_sdev_id;
4127         int             rval;
4128         int             i;
4129
4130         if (raid_dev->random_del_supported &&
4131                         MRAID_IS_LOGICAL_SDEV(adapter, sdev)) {
4132
4133                 rval = megaraid_sysfs_get_ldmap(adapter);
4134                 if (rval == 0) {
4135
4136                         for (i = 0; i < MAX_LOGICAL_DRIVES_40LD; i++) {
4137
4138                                 mapped_sdev_id = sdev->id;
4139
4140                                 if (sdev->id > adapter->init_id) {
4141                                         mapped_sdev_id -= 1;
4142                                 }
4143
4144                                 if (raid_dev->curr_ldmap[i] == mapped_sdev_id) {
4145
4146                                         scsi_id = sdev->id;
4147
4148                                         logical_drv = i;
4149
4150                                         ldid_map = raid_dev->curr_ldmap[i];
4151
4152                                         app_hndl = mraid_mm_adapter_app_handle(
4153                                                         adapter->unique_id);
4154
4155                                         break;
4156                                 }
4157                         }
4158                 }
4159                 else {
4160                         con_log(CL_ANN, (KERN_NOTICE
4161                                 "megaraid: sysfs get ld map failed: %x\n",
4162                                 rval));
4163                 }
4164         }
4165
4166         return snprintf(buf, 36, "%d %d %d %d\n", scsi_id, logical_drv,
4167                         ldid_map, app_hndl);
4168 }
4169
4170
4171 /*
4172  * END: Mailbox Low Level Driver
4173  */
4174 module_init(megaraid_init);
4175 module_exit(megaraid_exit);
4176
4177 /* vim: set ts=8 sw=8 tw=78 ai si: */