[SCSI] libfc: use rport timeout values for fcp recovery
[pandora-kernel.git] / drivers / scsi / libfc / fc_fcp.c
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37
38 #include <scsi/fc/fc_fc2.h>
39
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42
43 #include "fc_libfc.h"
44
45 struct kmem_cache *scsi_pkt_cachep;
46
47 /* SRB state definitions */
48 #define FC_SRB_FREE             0               /* cmd is free */
49 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
51 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
52 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
53 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
54 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
56
57 #define FC_SRB_READ             (1 << 1)
58 #define FC_SRB_WRITE            (1 << 0)
59
60 /* constant added to e_d_tov timeout to get rec_tov value */
61 #define REC_TOV_CONST           1
62
63 /*
64  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
65  */
66 #define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
67 #define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
68 #define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
69 #define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
70 #define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
71
72 /**
73  * struct fc_fcp_internal - FCP layer internal data
74  * @scsi_pkt_pool: Memory pool to draw FCP packets from
75  * @scsi_queue_lock: Protects the scsi_pkt_queue
76  * @scsi_pkt_queue: Current FCP packets
77  * @last_can_queue_ramp_down_time: ramp down time
78  * @last_can_queue_ramp_up_time: ramp up time
79  * @max_can_queue: max can_queue size
80  */
81 struct fc_fcp_internal {
82         mempool_t               *scsi_pkt_pool;
83         spinlock_t              scsi_queue_lock;
84         struct list_head        scsi_pkt_queue;
85         unsigned long           last_can_queue_ramp_down_time;
86         unsigned long           last_can_queue_ramp_up_time;
87         int                     max_can_queue;
88 };
89
90 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
91
92 /*
93  * function prototypes
94  * FC scsi I/O related functions
95  */
96 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
97 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
100 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
101 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
102 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
103 static void fc_fcp_timeout(unsigned long);
104 static void fc_fcp_rec(struct fc_fcp_pkt *);
105 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
106 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
107 static void fc_io_compl(struct fc_fcp_pkt *);
108
109 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
110 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
111 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
112
113 /*
114  * command status codes
115  */
116 #define FC_COMPLETE             0
117 #define FC_CMD_ABORTED          1
118 #define FC_CMD_RESET            2
119 #define FC_CMD_PLOGO            3
120 #define FC_SNS_RCV              4
121 #define FC_TRANS_ERR            5
122 #define FC_DATA_OVRRUN          6
123 #define FC_DATA_UNDRUN          7
124 #define FC_ERROR                8
125 #define FC_HRD_ERROR            9
126 #define FC_CRC_ERROR            10
127 #define FC_TIMED_OUT            11
128
129 /*
130  * Error recovery timeout values.
131  */
132 #define FC_SCSI_TM_TOV          (10 * HZ)
133 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
134 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
135
136 #define FC_MAX_ERROR_CNT        5
137 #define FC_MAX_RECOV_RETRY      3
138
139 #define FC_FCP_DFLT_QUEUE_DEPTH 32
140
141 /**
142  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
143  * @lport: The local port that the FCP packet is for
144  * @gfp:   GFP flags for allocation
145  *
146  * Return value: fcp_pkt structure or null on allocation failure.
147  * Context:      Can be called from process context, no lock is required.
148  */
149 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
150 {
151         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
152         struct fc_fcp_pkt *fsp;
153
154         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
155         if (fsp) {
156                 memset(fsp, 0, sizeof(*fsp));
157                 fsp->lp = lport;
158                 atomic_set(&fsp->ref_cnt, 1);
159                 init_timer(&fsp->timer);
160                 INIT_LIST_HEAD(&fsp->list);
161                 spin_lock_init(&fsp->scsi_pkt_lock);
162         }
163         return fsp;
164 }
165
166 /**
167  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
168  * @fsp: The FCP packet to be released
169  *
170  * Context: Can be called from process or interrupt context,
171  *          no lock is required.
172  */
173 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
174 {
175         if (atomic_dec_and_test(&fsp->ref_cnt)) {
176                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
177
178                 mempool_free(fsp, si->scsi_pkt_pool);
179         }
180 }
181
182 /**
183  * fc_fcp_pkt_hold() - Hold a fcp_pkt
184  * @fsp: The FCP packet to be held
185  */
186 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
187 {
188         atomic_inc(&fsp->ref_cnt);
189 }
190
191 /**
192  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
193  * @seq: The sequence that the FCP packet is on (required by destructor API)
194  * @fsp: The FCP packet to be released
195  *
196  * This routine is called by a destructor callback in the exch_seq_send()
197  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
198  * argument even though it is not used by this routine.
199  *
200  * Context: No locking required.
201  */
202 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
203 {
204         fc_fcp_pkt_release(fsp);
205 }
206
207 /**
208  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
209  * @fsp: The FCP packet to be locked and incremented
210  *
211  * We should only return error if we return a command to SCSI-ml before
212  * getting a response. This can happen in cases where we send a abort, but
213  * do not wait for the response and the abort and command can be passing
214  * each other on the wire/network-layer.
215  *
216  * Note: this function locks the packet and gets a reference to allow
217  * callers to call the completion function while the lock is held and
218  * not have to worry about the packets refcount.
219  *
220  * TODO: Maybe we should just have callers grab/release the lock and
221  * have a function that they call to verify the fsp and grab a ref if
222  * needed.
223  */
224 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
225 {
226         spin_lock_bh(&fsp->scsi_pkt_lock);
227         if (fsp->state & FC_SRB_COMPL) {
228                 spin_unlock_bh(&fsp->scsi_pkt_lock);
229                 return -EPERM;
230         }
231
232         fc_fcp_pkt_hold(fsp);
233         return 0;
234 }
235
236 /**
237  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
238  *                       reference count
239  * @fsp: The FCP packet to be unlocked and decremented
240  */
241 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
242 {
243         spin_unlock_bh(&fsp->scsi_pkt_lock);
244         fc_fcp_pkt_release(fsp);
245 }
246
247 /**
248  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
249  * @fsp:   The FCP packet to start a timer for
250  * @delay: The timeout period for the timer
251  */
252 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
253 {
254         if (!(fsp->state & FC_SRB_COMPL))
255                 mod_timer(&fsp->timer, jiffies + delay);
256 }
257
258 /**
259  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
260  *                       fcp_pkt
261  * @fsp: The FCP packet to abort exchanges on
262  */
263 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
264 {
265         if (!fsp->seq_ptr)
266                 return -EINVAL;
267
268         fsp->state |= FC_SRB_ABORT_PENDING;
269         return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
270 }
271
272 /**
273  * fc_fcp_retry_cmd() - Retry a fcp_pkt
274  * @fsp: The FCP packet to be retried
275  *
276  * Sets the status code to be FC_ERROR and then calls
277  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
278  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
279  * The SCSI-ml will retry the command.
280  */
281 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
282 {
283         if (fsp->seq_ptr) {
284                 fsp->lp->tt.exch_done(fsp->seq_ptr);
285                 fsp->seq_ptr = NULL;
286         }
287
288         fsp->state &= ~FC_SRB_ABORT_PENDING;
289         fsp->io_status = 0;
290         fsp->status_code = FC_ERROR;
291         fc_fcp_complete_locked(fsp);
292 }
293
294 /**
295  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
296  * @fsp: The FCP packet that will manage the DDP frames
297  * @xid: The XID that will be used for the DDP exchange
298  */
299 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
300 {
301         struct fc_lport *lport;
302
303         lport = fsp->lp;
304         if ((fsp->req_flags & FC_SRB_READ) &&
305             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
306                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
307                                         scsi_sg_count(fsp->cmd)))
308                         fsp->xfer_ddp = xid;
309         }
310 }
311
312 /**
313  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
314  *                     DDP related resources for a fcp_pkt
315  * @fsp: The FCP packet that DDP had been used on
316  */
317 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
318 {
319         struct fc_lport *lport;
320
321         if (!fsp)
322                 return;
323
324         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
325                 return;
326
327         lport = fsp->lp;
328         if (lport->tt.ddp_done) {
329                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
330                 fsp->xfer_ddp = FC_XID_UNKNOWN;
331         }
332 }
333
334 /**
335  * fc_fcp_can_queue_ramp_up() - increases can_queue
336  * @lport: lport to ramp up can_queue
337  *
338  * Locking notes: Called with Scsi_Host lock held
339  */
340 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
341 {
342         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
343         int can_queue;
344
345         if (si->last_can_queue_ramp_up_time &&
346             (time_before(jiffies, si->last_can_queue_ramp_up_time +
347                          FC_CAN_QUEUE_PERIOD)))
348                 return;
349
350         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
351                         FC_CAN_QUEUE_PERIOD))
352                 return;
353
354         si->last_can_queue_ramp_up_time = jiffies;
355
356         can_queue = lport->host->can_queue << 1;
357         if (can_queue >= si->max_can_queue) {
358                 can_queue = si->max_can_queue;
359                 si->last_can_queue_ramp_down_time = 0;
360         }
361         lport->host->can_queue = can_queue;
362         shost_printk(KERN_ERR, lport->host, "libfc: increased "
363                      "can_queue to %d.\n", can_queue);
364 }
365
366 /**
367  * fc_fcp_can_queue_ramp_down() - reduces can_queue
368  * @lport: lport to reduce can_queue
369  *
370  * If we are getting memory allocation failures, then we may
371  * be trying to execute too many commands. We let the running
372  * commands complete or timeout, then try again with a reduced
373  * can_queue. Eventually we will hit the point where we run
374  * on all reserved structs.
375  *
376  * Locking notes: Called with Scsi_Host lock held
377  */
378 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
379 {
380         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
381         int can_queue;
382
383         if (si->last_can_queue_ramp_down_time &&
384             (time_before(jiffies, si->last_can_queue_ramp_down_time +
385                          FC_CAN_QUEUE_PERIOD)))
386                 return;
387
388         si->last_can_queue_ramp_down_time = jiffies;
389
390         can_queue = lport->host->can_queue;
391         can_queue >>= 1;
392         if (!can_queue)
393                 can_queue = 1;
394         lport->host->can_queue = can_queue;
395         shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
396                      "Reducing can_queue to %d.\n", can_queue);
397 }
398
399 /*
400  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
401  * @lport:      fc lport struct
402  * @len:        payload length
403  *
404  * Allocates fc_frame structure and buffer but if fails to allocate
405  * then reduce can_queue.
406  */
407 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
408                                                   size_t len)
409 {
410         struct fc_frame *fp;
411         unsigned long flags;
412
413         fp = fc_frame_alloc(lport, len);
414         if (likely(fp))
415                 return fp;
416
417         /* error case */
418         spin_lock_irqsave(lport->host->host_lock, flags);
419         fc_fcp_can_queue_ramp_down(lport);
420         spin_unlock_irqrestore(lport->host->host_lock, flags);
421         return NULL;
422 }
423
424 /**
425  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
426  * @fsp: The FCP packet the data is on
427  * @fp:  The data frame
428  */
429 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
430 {
431         struct scsi_cmnd *sc = fsp->cmd;
432         struct fc_lport *lport = fsp->lp;
433         struct fcoe_dev_stats *stats;
434         struct fc_frame_header *fh;
435         size_t start_offset;
436         size_t offset;
437         u32 crc;
438         u32 copy_len = 0;
439         size_t len;
440         void *buf;
441         struct scatterlist *sg;
442         u32 nents;
443         u8 host_bcode = FC_COMPLETE;
444
445         fh = fc_frame_header_get(fp);
446         offset = ntohl(fh->fh_parm_offset);
447         start_offset = offset;
448         len = fr_len(fp) - sizeof(*fh);
449         buf = fc_frame_payload_get(fp, 0);
450
451         /*
452          * if this I/O is ddped then clear it and initiate recovery since data
453          * frames are expected to be placed directly in that case.
454          *
455          * Indicate error to scsi-ml because something went wrong with the
456          * ddp handling to get us here.
457          */
458         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
459                 fc_fcp_ddp_done(fsp);
460                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
461                 host_bcode = FC_ERROR;
462                 goto err;
463         }
464         if (offset + len > fsp->data_len) {
465                 /* this should never happen */
466                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
467                     fc_frame_crc_check(fp))
468                         goto crc_err;
469                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
470                            "data_len %x\n", len, offset, fsp->data_len);
471
472                 /* Data is corrupted indicate scsi-ml should retry */
473                 host_bcode = FC_DATA_OVRRUN;
474                 goto err;
475         }
476         if (offset != fsp->xfer_len)
477                 fsp->state |= FC_SRB_DISCONTIG;
478
479         sg = scsi_sglist(sc);
480         nents = scsi_sg_count(sc);
481
482         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
483                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
484                                                     &offset, KM_SOFTIRQ0, NULL);
485         } else {
486                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
487                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
488                                                     &offset, KM_SOFTIRQ0, &crc);
489                 buf = fc_frame_payload_get(fp, 0);
490                 if (len % 4)
491                         crc = crc32(crc, buf + len, 4 - (len % 4));
492
493                 if (~crc != le32_to_cpu(fr_crc(fp))) {
494 crc_err:
495                         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
496                         stats->ErrorFrames++;
497                         /* per cpu count, not total count, but OK for limit */
498                         if (stats->InvalidCRCCount++ < 5)
499                                 printk(KERN_WARNING "libfc: CRC error on data "
500                                        "frame for port (%6.6x)\n",
501                                        lport->port_id);
502                         put_cpu();
503                         /*
504                          * Assume the frame is total garbage.
505                          * We may have copied it over the good part
506                          * of the buffer.
507                          * If so, we need to retry the entire operation.
508                          * Otherwise, ignore it.
509                          */
510                         if (fsp->state & FC_SRB_DISCONTIG) {
511                                 host_bcode = FC_CRC_ERROR;
512                                 goto err;
513                         }
514                         return;
515                 }
516         }
517
518         if (fsp->xfer_contig_end == start_offset)
519                 fsp->xfer_contig_end += copy_len;
520         fsp->xfer_len += copy_len;
521
522         /*
523          * In the very rare event that this data arrived after the response
524          * and completes the transfer, call the completion handler.
525          */
526         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
527             fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
528                 fc_fcp_complete_locked(fsp);
529         return;
530 err:
531         fc_fcp_recovery(fsp, host_bcode);
532 }
533
534 /**
535  * fc_fcp_send_data() - Send SCSI data to a target
536  * @fsp:      The FCP packet the data is on
537  * @sp:       The sequence the data is to be sent on
538  * @offset:   The starting offset for this data request
539  * @seq_blen: The burst length for this data request
540  *
541  * Called after receiving a Transfer Ready data descriptor.
542  * If the LLD is capable of sequence offload then send down the
543  * seq_blen amount of data in single frame, otherwise send
544  * multiple frames of the maximum frame payload supported by
545  * the target port.
546  */
547 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
548                             size_t offset, size_t seq_blen)
549 {
550         struct fc_exch *ep;
551         struct scsi_cmnd *sc;
552         struct scatterlist *sg;
553         struct fc_frame *fp = NULL;
554         struct fc_lport *lport = fsp->lp;
555         struct page *page;
556         size_t remaining;
557         size_t t_blen;
558         size_t tlen;
559         size_t sg_bytes;
560         size_t frame_offset, fh_parm_offset;
561         size_t off;
562         int error;
563         void *data = NULL;
564         void *page_addr;
565         int using_sg = lport->sg_supp;
566         u32 f_ctl;
567
568         WARN_ON(seq_blen <= 0);
569         if (unlikely(offset + seq_blen > fsp->data_len)) {
570                 /* this should never happen */
571                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
572                            "offset %zx\n", seq_blen, offset);
573                 fc_fcp_send_abort(fsp);
574                 return 0;
575         } else if (offset != fsp->xfer_len) {
576                 /* Out of Order Data Request - no problem, but unexpected. */
577                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
578                            "seq_blen %zx offset %zx\n", seq_blen, offset);
579         }
580
581         /*
582          * if LLD is capable of seq_offload then set transport
583          * burst length (t_blen) to seq_blen, otherwise set t_blen
584          * to max FC frame payload previously set in fsp->max_payload.
585          */
586         t_blen = fsp->max_payload;
587         if (lport->seq_offload) {
588                 t_blen = min(seq_blen, (size_t)lport->lso_max);
589                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
590                            fsp, seq_blen, lport->lso_max, t_blen);
591         }
592
593         if (t_blen > 512)
594                 t_blen &= ~(512 - 1);   /* round down to block size */
595         sc = fsp->cmd;
596
597         remaining = seq_blen;
598         fh_parm_offset = frame_offset = offset;
599         tlen = 0;
600         seq = lport->tt.seq_start_next(seq);
601         f_ctl = FC_FC_REL_OFF;
602         WARN_ON(!seq);
603
604         sg = scsi_sglist(sc);
605
606         while (remaining > 0 && sg) {
607                 if (offset >= sg->length) {
608                         offset -= sg->length;
609                         sg = sg_next(sg);
610                         continue;
611                 }
612                 if (!fp) {
613                         tlen = min(t_blen, remaining);
614
615                         /*
616                          * TODO.  Temporary workaround.  fc_seq_send() can't
617                          * handle odd lengths in non-linear skbs.
618                          * This will be the final fragment only.
619                          */
620                         if (tlen % 4)
621                                 using_sg = 0;
622                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
623                         if (!fp)
624                                 return -ENOMEM;
625
626                         data = fc_frame_header_get(fp) + 1;
627                         fh_parm_offset = frame_offset;
628                         fr_max_payload(fp) = fsp->max_payload;
629                 }
630
631                 off = offset + sg->offset;
632                 sg_bytes = min(tlen, sg->length - offset);
633                 sg_bytes = min(sg_bytes,
634                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
635                 page = sg_page(sg) + (off >> PAGE_SHIFT);
636                 if (using_sg) {
637                         get_page(page);
638                         skb_fill_page_desc(fp_skb(fp),
639                                            skb_shinfo(fp_skb(fp))->nr_frags,
640                                            page, off & ~PAGE_MASK, sg_bytes);
641                         fp_skb(fp)->data_len += sg_bytes;
642                         fr_len(fp) += sg_bytes;
643                         fp_skb(fp)->truesize += PAGE_SIZE;
644                 } else {
645                         /*
646                          * The scatterlist item may be bigger than PAGE_SIZE,
647                          * but we must not cross pages inside the kmap.
648                          */
649                         page_addr = kmap_atomic(page, KM_SOFTIRQ0);
650                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
651                                sg_bytes);
652                         kunmap_atomic(page_addr, KM_SOFTIRQ0);
653                         data += sg_bytes;
654                 }
655                 offset += sg_bytes;
656                 frame_offset += sg_bytes;
657                 tlen -= sg_bytes;
658                 remaining -= sg_bytes;
659
660                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
661                     (tlen))
662                         continue;
663
664                 /*
665                  * Send sequence with transfer sequence initiative in case
666                  * this is last FCP frame of the sequence.
667                  */
668                 if (remaining == 0)
669                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
670
671                 ep = fc_seq_exch(seq);
672                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
673                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
674
675                 /*
676                  * send fragment using for a sequence.
677                  */
678                 error = lport->tt.seq_send(lport, seq, fp);
679                 if (error) {
680                         WARN_ON(1);             /* send error should be rare */
681                         fc_fcp_retry_cmd(fsp);
682                         return 0;
683                 }
684                 fp = NULL;
685         }
686         fsp->xfer_len += seq_blen;      /* premature count? */
687         return 0;
688 }
689
690 /**
691  * fc_fcp_abts_resp() - Send an ABTS response
692  * @fsp: The FCP packet that is being aborted
693  * @fp:  The response frame
694  */
695 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
696 {
697         int ba_done = 1;
698         struct fc_ba_rjt *brp;
699         struct fc_frame_header *fh;
700
701         fh = fc_frame_header_get(fp);
702         switch (fh->fh_r_ctl) {
703         case FC_RCTL_BA_ACC:
704                 break;
705         case FC_RCTL_BA_RJT:
706                 brp = fc_frame_payload_get(fp, sizeof(*brp));
707                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
708                         break;
709                 /* fall thru */
710         default:
711                 /*
712                  * we will let the command timeout
713                  * and scsi-ml recover in this case,
714                  * therefore cleared the ba_done flag.
715                  */
716                 ba_done = 0;
717         }
718
719         if (ba_done) {
720                 fsp->state |= FC_SRB_ABORTED;
721                 fsp->state &= ~FC_SRB_ABORT_PENDING;
722
723                 if (fsp->wait_for_comp)
724                         complete(&fsp->tm_done);
725                 else
726                         fc_fcp_complete_locked(fsp);
727         }
728 }
729
730 /**
731  * fc_fcp_recv() - Reveive an FCP frame
732  * @seq: The sequence the frame is on
733  * @fp:  The received frame
734  * @arg: The related FCP packet
735  *
736  * Context: Called from Soft IRQ context. Can not be called
737  *          holding the FCP packet list lock.
738  */
739 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
740 {
741         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
742         struct fc_lport *lport = fsp->lp;
743         struct fc_frame_header *fh;
744         struct fcp_txrdy *dd;
745         u8 r_ctl;
746         int rc = 0;
747
748         if (IS_ERR(fp)) {
749                 fc_fcp_error(fsp, fp);
750                 return;
751         }
752
753         fh = fc_frame_header_get(fp);
754         r_ctl = fh->fh_r_ctl;
755
756         if (lport->state != LPORT_ST_READY)
757                 goto out;
758         if (fc_fcp_lock_pkt(fsp))
759                 goto out;
760         fsp->last_pkt_time = jiffies;
761
762         if (fh->fh_type == FC_TYPE_BLS) {
763                 fc_fcp_abts_resp(fsp, fp);
764                 goto unlock;
765         }
766
767         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
768                 goto unlock;
769
770         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
771                 /*
772                  * received XFER RDY from the target
773                  * need to send data to the target
774                  */
775                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
776                 dd = fc_frame_payload_get(fp, sizeof(*dd));
777                 WARN_ON(!dd);
778
779                 rc = fc_fcp_send_data(fsp, seq,
780                                       (size_t) ntohl(dd->ft_data_ro),
781                                       (size_t) ntohl(dd->ft_burst_len));
782                 if (!rc)
783                         seq->rec_data = fsp->xfer_len;
784         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
785                 /*
786                  * received a DATA frame
787                  * next we will copy the data to the system buffer
788                  */
789                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
790                 fc_fcp_recv_data(fsp, fp);
791                 seq->rec_data = fsp->xfer_contig_end;
792         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
793                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
794
795                 fc_fcp_resp(fsp, fp);
796         } else {
797                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
798         }
799 unlock:
800         fc_fcp_unlock_pkt(fsp);
801 out:
802         fc_frame_free(fp);
803 }
804
805 /**
806  * fc_fcp_resp() - Handler for FCP responses
807  * @fsp: The FCP packet the response is for
808  * @fp:  The response frame
809  */
810 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
811 {
812         struct fc_frame_header *fh;
813         struct fcp_resp *fc_rp;
814         struct fcp_resp_ext *rp_ex;
815         struct fcp_resp_rsp_info *fc_rp_info;
816         u32 plen;
817         u32 expected_len;
818         u32 respl = 0;
819         u32 snsl = 0;
820         u8 flags = 0;
821
822         plen = fr_len(fp);
823         fh = (struct fc_frame_header *)fr_hdr(fp);
824         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
825                 goto len_err;
826         plen -= sizeof(*fh);
827         fc_rp = (struct fcp_resp *)(fh + 1);
828         fsp->cdb_status = fc_rp->fr_status;
829         flags = fc_rp->fr_flags;
830         fsp->scsi_comp_flags = flags;
831         expected_len = fsp->data_len;
832
833         /* if ddp, update xfer len */
834         fc_fcp_ddp_done(fsp);
835
836         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
837                 rp_ex = (void *)(fc_rp + 1);
838                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
839                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
840                                 goto len_err;
841                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
842                         if (flags & FCP_RSP_LEN_VAL) {
843                                 respl = ntohl(rp_ex->fr_rsp_len);
844                                 if (respl != sizeof(*fc_rp_info))
845                                         goto len_err;
846                                 if (fsp->wait_for_comp) {
847                                         /* Abuse cdb_status for rsp code */
848                                         fsp->cdb_status = fc_rp_info->rsp_code;
849                                         complete(&fsp->tm_done);
850                                         /*
851                                          * tmfs will not have any scsi cmd so
852                                          * exit here
853                                          */
854                                         return;
855                                 }
856                         }
857                         if (flags & FCP_SNS_LEN_VAL) {
858                                 snsl = ntohl(rp_ex->fr_sns_len);
859                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
860                                         snsl = SCSI_SENSE_BUFFERSIZE;
861                                 memcpy(fsp->cmd->sense_buffer,
862                                        (char *)fc_rp_info + respl, snsl);
863                         }
864                 }
865                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
866                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
867                                 goto len_err;
868                         if (flags & FCP_RESID_UNDER) {
869                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
870                                 /*
871                                  * The cmnd->underflow is the minimum number of
872                                  * bytes that must be transfered for this
873                                  * command.  Provided a sense condition is not
874                                  * present, make sure the actual amount
875                                  * transferred is at least the underflow value
876                                  * or fail.
877                                  */
878                                 if (!(flags & FCP_SNS_LEN_VAL) &&
879                                     (fc_rp->fr_status == 0) &&
880                                     (scsi_bufflen(fsp->cmd) -
881                                      fsp->scsi_resid) < fsp->cmd->underflow)
882                                         goto err;
883                                 expected_len -= fsp->scsi_resid;
884                         } else {
885                                 fsp->status_code = FC_ERROR;
886                         }
887                 }
888         }
889         fsp->state |= FC_SRB_RCV_STATUS;
890
891         /*
892          * Check for missing or extra data frames.
893          */
894         if (unlikely(fsp->xfer_len != expected_len)) {
895                 if (fsp->xfer_len < expected_len) {
896                         /*
897                          * Some data may be queued locally,
898                          * Wait a at least one jiffy to see if it is delivered.
899                          * If this expires without data, we may do SRR.
900                          */
901                         fc_fcp_timer_set(fsp, 2);
902                         return;
903                 }
904                 fsp->status_code = FC_DATA_OVRRUN;
905                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
906                            "len %x, data len %x\n",
907                            fsp->rport->port_id,
908                            fsp->xfer_len, expected_len, fsp->data_len);
909         }
910         fc_fcp_complete_locked(fsp);
911         return;
912
913 len_err:
914         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
915                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
916 err:
917         fsp->status_code = FC_ERROR;
918         fc_fcp_complete_locked(fsp);
919 }
920
921 /**
922  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
923  *                            fcp_pkt lock held
924  * @fsp: The FCP packet to be completed
925  *
926  * This function may sleep if a timer is pending. The packet lock must be
927  * held, and the host lock must not be held.
928  */
929 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
930 {
931         struct fc_lport *lport = fsp->lp;
932         struct fc_seq *seq;
933         struct fc_exch *ep;
934         u32 f_ctl;
935
936         if (fsp->state & FC_SRB_ABORT_PENDING)
937                 return;
938
939         if (fsp->state & FC_SRB_ABORTED) {
940                 if (!fsp->status_code)
941                         fsp->status_code = FC_CMD_ABORTED;
942         } else {
943                 /*
944                  * Test for transport underrun, independent of response
945                  * underrun status.
946                  */
947                 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
948                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
949                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
950                         fsp->status_code = FC_DATA_UNDRUN;
951                         fsp->io_status = 0;
952                 }
953         }
954
955         seq = fsp->seq_ptr;
956         if (seq) {
957                 fsp->seq_ptr = NULL;
958                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
959                         struct fc_frame *conf_frame;
960                         struct fc_seq *csp;
961
962                         csp = lport->tt.seq_start_next(seq);
963                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
964                         if (conf_frame) {
965                                 f_ctl = FC_FC_SEQ_INIT;
966                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
967                                 ep = fc_seq_exch(seq);
968                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
969                                                ep->did, ep->sid,
970                                                FC_TYPE_FCP, f_ctl, 0);
971                                 lport->tt.seq_send(lport, csp, conf_frame);
972                         }
973                 }
974                 lport->tt.exch_done(seq);
975         }
976         fc_io_compl(fsp);
977 }
978
979 /**
980  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
981  * @fsp:   The FCP packet whose exchanges should be canceled
982  * @error: The reason for the cancellation
983  */
984 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
985 {
986         struct fc_lport *lport = fsp->lp;
987
988         if (fsp->seq_ptr) {
989                 lport->tt.exch_done(fsp->seq_ptr);
990                 fsp->seq_ptr = NULL;
991         }
992         fsp->status_code = error;
993 }
994
995 /**
996  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
997  * @lport: The local port whose exchanges should be canceled
998  * @id:    The target's ID
999  * @lun:   The LUN
1000  * @error: The reason for cancellation
1001  *
1002  * If lun or id is -1, they are ignored.
1003  */
1004 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1005                                     unsigned int lun, int error)
1006 {
1007         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1008         struct fc_fcp_pkt *fsp;
1009         struct scsi_cmnd *sc_cmd;
1010         unsigned long flags;
1011
1012         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1013 restart:
1014         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1015                 sc_cmd = fsp->cmd;
1016                 if (id != -1 && scmd_id(sc_cmd) != id)
1017                         continue;
1018
1019                 if (lun != -1 && sc_cmd->device->lun != lun)
1020                         continue;
1021
1022                 fc_fcp_pkt_hold(fsp);
1023                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1024
1025                 if (!fc_fcp_lock_pkt(fsp)) {
1026                         fc_fcp_cleanup_cmd(fsp, error);
1027                         fc_io_compl(fsp);
1028                         fc_fcp_unlock_pkt(fsp);
1029                 }
1030
1031                 fc_fcp_pkt_release(fsp);
1032                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1033                 /*
1034                  * while we dropped the lock multiple pkts could
1035                  * have been released, so we have to start over.
1036                  */
1037                 goto restart;
1038         }
1039         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1040 }
1041
1042 /**
1043  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1044  * @lport: The local port whose exchanges are to be aborted
1045  */
1046 static void fc_fcp_abort_io(struct fc_lport *lport)
1047 {
1048         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1049 }
1050
1051 /**
1052  * fc_fcp_pkt_send() - Send a fcp_pkt
1053  * @lport: The local port to send the FCP packet on
1054  * @fsp:   The FCP packet to send
1055  *
1056  * Return:  Zero for success and -1 for failure
1057  * Locks:   Called without locks held
1058  */
1059 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1060 {
1061         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1062         unsigned long flags;
1063         int rc;
1064
1065         fsp->cmd->SCp.ptr = (char *)fsp;
1066         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1067         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1068
1069         int_to_scsilun(fsp->cmd->device->lun,
1070                        (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1071         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1072
1073         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1074         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1075         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1076         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1077         if (unlikely(rc)) {
1078                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1079                 list_del(&fsp->list);
1080                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1081         }
1082
1083         return rc;
1084 }
1085
1086 /**
1087  * get_fsp_rec_tov() - Helper function to get REC_TOV
1088  * @fsp: the FCP packet
1089  */
1090 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1091 {
1092         struct fc_rport *rport;
1093         struct fc_rport_libfc_priv *rpriv;
1094
1095         rport = fsp->rport;
1096         rpriv = rport->dd_data;
1097
1098         return rpriv->e_d_tov + REC_TOV_CONST;
1099 }
1100
1101 /**
1102  * fc_fcp_cmd_send() - Send a FCP command
1103  * @lport: The local port to send the command on
1104  * @fsp:   The FCP packet the command is on
1105  * @resp:  The handler for the response
1106  */
1107 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1108                            void (*resp)(struct fc_seq *,
1109                                         struct fc_frame *fp,
1110                                         void *arg))
1111 {
1112         struct fc_frame *fp;
1113         struct fc_seq *seq;
1114         struct fc_rport *rport;
1115         struct fc_rport_libfc_priv *rpriv;
1116         const size_t len = sizeof(fsp->cdb_cmd);
1117         int rc = 0;
1118         unsigned int rec_tov;
1119
1120         if (fc_fcp_lock_pkt(fsp))
1121                 return 0;
1122
1123         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1124         if (!fp) {
1125                 rc = -1;
1126                 goto unlock;
1127         }
1128
1129         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1130         fr_fsp(fp) = fsp;
1131         rport = fsp->rport;
1132         fsp->max_payload = rport->maxframe_size;
1133         rpriv = rport->dd_data;
1134
1135         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1136                        rpriv->local_port->port_id, FC_TYPE_FCP,
1137                        FC_FCTL_REQ, 0);
1138
1139         seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1140                                       fsp, 0);
1141         if (!seq) {
1142                 rc = -1;
1143                 goto unlock;
1144         }
1145         fsp->last_pkt_time = jiffies;
1146         fsp->seq_ptr = seq;
1147         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1148
1149         rec_tov = get_fsp_rec_tov(fsp);
1150
1151         setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1152
1153         if (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED)
1154                 fc_fcp_timer_set(fsp, rec_tov);
1155 unlock:
1156         fc_fcp_unlock_pkt(fsp);
1157         return rc;
1158 }
1159
1160 /**
1161  * fc_fcp_error() - Handler for FCP layer errors
1162  * @fsp: The FCP packet the error is on
1163  * @fp:  The frame that has errored
1164  */
1165 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1166 {
1167         int error = PTR_ERR(fp);
1168
1169         if (fc_fcp_lock_pkt(fsp))
1170                 return;
1171
1172         if (error == -FC_EX_CLOSED) {
1173                 fc_fcp_retry_cmd(fsp);
1174                 goto unlock;
1175         }
1176
1177         /*
1178          * clear abort pending, because the lower layer
1179          * decided to force completion.
1180          */
1181         fsp->state &= ~FC_SRB_ABORT_PENDING;
1182         fsp->status_code = FC_CMD_PLOGO;
1183         fc_fcp_complete_locked(fsp);
1184 unlock:
1185         fc_fcp_unlock_pkt(fsp);
1186 }
1187
1188 /**
1189  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1190  * @fsp:   The FCP packet to abort on
1191  *
1192  * Called to send an abort and then wait for abort completion
1193  */
1194 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1195 {
1196         int rc = FAILED;
1197
1198         if (fc_fcp_send_abort(fsp))
1199                 return FAILED;
1200
1201         init_completion(&fsp->tm_done);
1202         fsp->wait_for_comp = 1;
1203
1204         spin_unlock_bh(&fsp->scsi_pkt_lock);
1205         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1206         spin_lock_bh(&fsp->scsi_pkt_lock);
1207         fsp->wait_for_comp = 0;
1208
1209         if (!rc) {
1210                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1211                 rc = FAILED;
1212         } else if (fsp->state & FC_SRB_ABORTED) {
1213                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1214                 rc = SUCCESS;
1215                 fc_fcp_complete_locked(fsp);
1216         }
1217
1218         return rc;
1219 }
1220
1221 /**
1222  * fc_lun_reset_send() - Send LUN reset command
1223  * @data: The FCP packet that identifies the LUN to be reset
1224  */
1225 static void fc_lun_reset_send(unsigned long data)
1226 {
1227         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1228         struct fc_lport *lport = fsp->lp;
1229         unsigned int rec_tov;
1230
1231         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1232                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1233                         return;
1234                 if (fc_fcp_lock_pkt(fsp))
1235                         return;
1236                 rec_tov = get_fsp_rec_tov(fsp);
1237                 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1238                 fc_fcp_timer_set(fsp, rec_tov);
1239                 fc_fcp_unlock_pkt(fsp);
1240         }
1241 }
1242
1243 /**
1244  * fc_lun_reset() - Send a LUN RESET command to a device
1245  *                  and wait for the reply
1246  * @lport: The local port to sent the comand on
1247  * @fsp:   The FCP packet that identifies the LUN to be reset
1248  * @id:    The SCSI command ID
1249  * @lun:   The LUN ID to be reset
1250  */
1251 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1252                         unsigned int id, unsigned int lun)
1253 {
1254         int rc;
1255
1256         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1257         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1258         int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1259
1260         fsp->wait_for_comp = 1;
1261         init_completion(&fsp->tm_done);
1262
1263         fc_lun_reset_send((unsigned long)fsp);
1264
1265         /*
1266          * wait for completion of reset
1267          * after that make sure all commands are terminated
1268          */
1269         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1270
1271         spin_lock_bh(&fsp->scsi_pkt_lock);
1272         fsp->state |= FC_SRB_COMPL;
1273         spin_unlock_bh(&fsp->scsi_pkt_lock);
1274
1275         del_timer_sync(&fsp->timer);
1276
1277         spin_lock_bh(&fsp->scsi_pkt_lock);
1278         if (fsp->seq_ptr) {
1279                 lport->tt.exch_done(fsp->seq_ptr);
1280                 fsp->seq_ptr = NULL;
1281         }
1282         fsp->wait_for_comp = 0;
1283         spin_unlock_bh(&fsp->scsi_pkt_lock);
1284
1285         if (!rc) {
1286                 FC_SCSI_DBG(lport, "lun reset failed\n");
1287                 return FAILED;
1288         }
1289
1290         /* cdb_status holds the tmf's rsp code */
1291         if (fsp->cdb_status != FCP_TMF_CMPL)
1292                 return FAILED;
1293
1294         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1295         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1296         return SUCCESS;
1297 }
1298
1299 /**
1300  * fc_tm_done() - Task Managment response handler
1301  * @seq: The sequence that the response is on
1302  * @fp:  The response frame
1303  * @arg: The FCP packet the response is for
1304  */
1305 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1306 {
1307         struct fc_fcp_pkt *fsp = arg;
1308         struct fc_frame_header *fh;
1309
1310         if (IS_ERR(fp)) {
1311                 /*
1312                  * If there is an error just let it timeout or wait
1313                  * for TMF to be aborted if it timedout.
1314                  *
1315                  * scsi-eh will escalate for when either happens.
1316                  */
1317                 return;
1318         }
1319
1320         if (fc_fcp_lock_pkt(fsp))
1321                 return;
1322
1323         /*
1324          * raced with eh timeout handler.
1325          */
1326         if (!fsp->seq_ptr || !fsp->wait_for_comp) {
1327                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1328                 return;
1329         }
1330
1331         fh = fc_frame_header_get(fp);
1332         if (fh->fh_type != FC_TYPE_BLS)
1333                 fc_fcp_resp(fsp, fp);
1334         fsp->seq_ptr = NULL;
1335         fsp->lp->tt.exch_done(seq);
1336         fc_frame_free(fp);
1337         fc_fcp_unlock_pkt(fsp);
1338 }
1339
1340 /**
1341  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1342  * @lport: The local port to be cleaned up
1343  */
1344 static void fc_fcp_cleanup(struct fc_lport *lport)
1345 {
1346         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1347 }
1348
1349 /**
1350  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1351  * @data: The FCP packet that has timed out
1352  *
1353  * If REC is supported then just issue it and return. The REC exchange will
1354  * complete or time out and recovery can continue at that point. Otherwise,
1355  * if the response has been received without all the data it has been
1356  * ER_TIMEOUT since the response was received. If the response has not been
1357  * received we see if data was received recently. If it has been then we
1358  * continue waiting, otherwise, we abort the command.
1359  */
1360 static void fc_fcp_timeout(unsigned long data)
1361 {
1362         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1363         struct fc_rport *rport = fsp->rport;
1364         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1365
1366         if (fc_fcp_lock_pkt(fsp))
1367                 return;
1368
1369         if (fsp->cdb_cmd.fc_tm_flags)
1370                 goto unlock;
1371
1372         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1373
1374         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1375                 fc_fcp_rec(fsp);
1376         else if (fsp->state & FC_SRB_RCV_STATUS)
1377                 fc_fcp_complete_locked(fsp);
1378         else
1379                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1380         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1381 unlock:
1382         fc_fcp_unlock_pkt(fsp);
1383 }
1384
1385 /**
1386  * fc_fcp_rec() - Send a REC ELS request
1387  * @fsp: The FCP packet to send the REC request on
1388  */
1389 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1390 {
1391         struct fc_lport *lport;
1392         struct fc_frame *fp;
1393         struct fc_rport *rport;
1394         struct fc_rport_libfc_priv *rpriv;
1395         unsigned int rec_tov;
1396
1397         lport = fsp->lp;
1398         rport = fsp->rport;
1399         rpriv = rport->dd_data;
1400         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1401                 fsp->status_code = FC_HRD_ERROR;
1402                 fsp->io_status = 0;
1403                 fc_fcp_complete_locked(fsp);
1404                 return;
1405         }
1406
1407         rec_tov = get_fsp_rec_tov(fsp);
1408
1409         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1410         if (!fp)
1411                 goto retry;
1412
1413         fr_seq(fp) = fsp->seq_ptr;
1414         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1415                        rpriv->local_port->port_id, FC_TYPE_ELS,
1416                        FC_FCTL_REQ, 0);
1417         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1418                                  fc_fcp_rec_resp, fsp,
1419                                  jiffies_to_msecs(rec_tov))) {
1420                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1421                 return;
1422         }
1423 retry:
1424         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1425                 fc_fcp_timer_set(fsp, rec_tov);
1426         else
1427                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1428 }
1429
1430 /**
1431  * fc_fcp_rec_resp() - Handler for REC ELS responses
1432  * @seq: The sequence the response is on
1433  * @fp:  The response frame
1434  * @arg: The FCP packet the response is on
1435  *
1436  * If the response is a reject then the scsi layer will handle
1437  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1438  * set the timeout and return. If the I/O was completed then complete the
1439  * exchange and tell the SCSI layer.
1440  */
1441 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1442 {
1443         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1444         struct fc_els_rec_acc *recp;
1445         struct fc_els_ls_rjt *rjt;
1446         u32 e_stat;
1447         u8 opcode;
1448         u32 offset;
1449         enum dma_data_direction data_dir;
1450         enum fc_rctl r_ctl;
1451         struct fc_rport_libfc_priv *rpriv;
1452
1453         if (IS_ERR(fp)) {
1454                 fc_fcp_rec_error(fsp, fp);
1455                 return;
1456         }
1457
1458         if (fc_fcp_lock_pkt(fsp))
1459                 goto out;
1460
1461         fsp->recov_retry = 0;
1462         opcode = fc_frame_payload_op(fp);
1463         if (opcode == ELS_LS_RJT) {
1464                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1465                 switch (rjt->er_reason) {
1466                 default:
1467                         FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1468                                    "reason %d expl %d\n",
1469                                    fsp->rport->port_id, rjt->er_reason,
1470                                    rjt->er_explan);
1471                         /* fall through */
1472                 case ELS_RJT_UNSUP:
1473                         FC_FCP_DBG(fsp, "device does not support REC\n");
1474                         rpriv = fsp->rport->dd_data;
1475                         /*
1476                          * if we do not spport RECs or got some bogus
1477                          * reason then resetup timer so we check for
1478                          * making progress.
1479                          */
1480                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1481                         break;
1482                 case ELS_RJT_LOGIC:
1483                 case ELS_RJT_UNAB:
1484                         /*
1485                          * If no data transfer, the command frame got dropped
1486                          * so we just retry.  If data was transferred, we
1487                          * lost the response but the target has no record,
1488                          * so we abort and retry.
1489                          */
1490                         if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1491                             fsp->xfer_len == 0) {
1492                                 fc_fcp_retry_cmd(fsp);
1493                                 break;
1494                         }
1495                         fc_fcp_recovery(fsp, FC_ERROR);
1496                         break;
1497                 }
1498         } else if (opcode == ELS_LS_ACC) {
1499                 if (fsp->state & FC_SRB_ABORTED)
1500                         goto unlock_out;
1501
1502                 data_dir = fsp->cmd->sc_data_direction;
1503                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1504                 offset = ntohl(recp->reca_fc4value);
1505                 e_stat = ntohl(recp->reca_e_stat);
1506
1507                 if (e_stat & ESB_ST_COMPLETE) {
1508
1509                         /*
1510                          * The exchange is complete.
1511                          *
1512                          * For output, we must've lost the response.
1513                          * For input, all data must've been sent.
1514                          * We lost may have lost the response
1515                          * (and a confirmation was requested) and maybe
1516                          * some data.
1517                          *
1518                          * If all data received, send SRR
1519                          * asking for response.  If partial data received,
1520                          * or gaps, SRR requests data at start of gap.
1521                          * Recovery via SRR relies on in-order-delivery.
1522                          */
1523                         if (data_dir == DMA_TO_DEVICE) {
1524                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1525                         } else if (fsp->xfer_contig_end == offset) {
1526                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1527                         } else {
1528                                 offset = fsp->xfer_contig_end;
1529                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1530                         }
1531                         fc_fcp_srr(fsp, r_ctl, offset);
1532                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1533                         unsigned int rec_tov = get_fsp_rec_tov(fsp);
1534                         /*
1535                          * The remote port has the initiative, so just
1536                          * keep waiting for it to complete.
1537                          */
1538                         fc_fcp_timer_set(fsp, rec_tov);
1539                 } else {
1540
1541                         /*
1542                          * The exchange is incomplete, we have seq. initiative.
1543                          * Lost response with requested confirmation,
1544                          * lost confirmation, lost transfer ready or
1545                          * lost write data.
1546                          *
1547                          * For output, if not all data was received, ask
1548                          * for transfer ready to be repeated.
1549                          *
1550                          * If we received or sent all the data, send SRR to
1551                          * request response.
1552                          *
1553                          * If we lost a response, we may have lost some read
1554                          * data as well.
1555                          */
1556                         r_ctl = FC_RCTL_DD_SOL_DATA;
1557                         if (data_dir == DMA_TO_DEVICE) {
1558                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1559                                 if (offset < fsp->data_len)
1560                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1561                         } else if (offset == fsp->xfer_contig_end) {
1562                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1563                         } else if (fsp->xfer_contig_end < offset) {
1564                                 offset = fsp->xfer_contig_end;
1565                         }
1566                         fc_fcp_srr(fsp, r_ctl, offset);
1567                 }
1568         }
1569 unlock_out:
1570         fc_fcp_unlock_pkt(fsp);
1571 out:
1572         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1573         fc_frame_free(fp);
1574 }
1575
1576 /**
1577  * fc_fcp_rec_error() - Handler for REC errors
1578  * @fsp: The FCP packet the error is on
1579  * @fp:  The REC frame
1580  */
1581 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1582 {
1583         int error = PTR_ERR(fp);
1584
1585         if (fc_fcp_lock_pkt(fsp))
1586                 goto out;
1587
1588         switch (error) {
1589         case -FC_EX_CLOSED:
1590                 fc_fcp_retry_cmd(fsp);
1591                 break;
1592
1593         default:
1594                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1595                            fsp, fsp->rport->port_id, error);
1596                 fsp->status_code = FC_CMD_PLOGO;
1597                 /* fall through */
1598
1599         case -FC_EX_TIMEOUT:
1600                 /*
1601                  * Assume REC or LS_ACC was lost.
1602                  * The exchange manager will have aborted REC, so retry.
1603                  */
1604                 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1605                            fsp->rport->port_id, error, fsp->recov_retry,
1606                            FC_MAX_RECOV_RETRY);
1607                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1608                         fc_fcp_rec(fsp);
1609                 else
1610                         fc_fcp_recovery(fsp, FC_ERROR);
1611                 break;
1612         }
1613         fc_fcp_unlock_pkt(fsp);
1614 out:
1615         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1616 }
1617
1618 /**
1619  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1620  * @fsp: The FCP pkt that needs to be aborted
1621  */
1622 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1623 {
1624         fsp->status_code = code;
1625         fsp->cdb_status = 0;
1626         fsp->io_status = 0;
1627         /*
1628          * if this fails then we let the scsi command timer fire and
1629          * scsi-ml escalate.
1630          */
1631         fc_fcp_send_abort(fsp);
1632 }
1633
1634 /**
1635  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1636  * @fsp:   The FCP packet the SRR is to be sent on
1637  * @r_ctl: The R_CTL field for the SRR request
1638  * This is called after receiving status but insufficient data, or
1639  * when expecting status but the request has timed out.
1640  */
1641 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1642 {
1643         struct fc_lport *lport = fsp->lp;
1644         struct fc_rport *rport;
1645         struct fc_rport_libfc_priv *rpriv;
1646         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1647         struct fc_seq *seq;
1648         struct fcp_srr *srr;
1649         struct fc_frame *fp;
1650         u8 cdb_op;
1651         unsigned int rec_tov;
1652
1653         rport = fsp->rport;
1654         rpriv = rport->dd_data;
1655         cdb_op = fsp->cdb_cmd.fc_cdb[0];
1656
1657         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1658             rpriv->rp_state != RPORT_ST_READY)
1659                 goto retry;                     /* shouldn't happen */
1660         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1661         if (!fp)
1662                 goto retry;
1663
1664         srr = fc_frame_payload_get(fp, sizeof(*srr));
1665         memset(srr, 0, sizeof(*srr));
1666         srr->srr_op = ELS_SRR;
1667         srr->srr_ox_id = htons(ep->oxid);
1668         srr->srr_rx_id = htons(ep->rxid);
1669         srr->srr_r_ctl = r_ctl;
1670         srr->srr_rel_off = htonl(offset);
1671
1672         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1673                        rpriv->local_port->port_id, FC_TYPE_FCP,
1674                        FC_FCTL_REQ, 0);
1675
1676         rec_tov = get_fsp_rec_tov(fsp);
1677         seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
1678                                       fsp, jiffies_to_msecs(rec_tov));
1679         if (!seq)
1680                 goto retry;
1681
1682         fsp->recov_seq = seq;
1683         fsp->xfer_len = offset;
1684         fsp->xfer_contig_end = offset;
1685         fsp->state &= ~FC_SRB_RCV_STATUS;
1686         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1687         return;
1688 retry:
1689         fc_fcp_retry_cmd(fsp);
1690 }
1691
1692 /**
1693  * fc_fcp_srr_resp() - Handler for SRR response
1694  * @seq: The sequence the SRR is on
1695  * @fp:  The SRR frame
1696  * @arg: The FCP packet the SRR is on
1697  */
1698 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1699 {
1700         struct fc_fcp_pkt *fsp = arg;
1701         struct fc_frame_header *fh;
1702         unsigned int rec_tov;
1703
1704         if (IS_ERR(fp)) {
1705                 fc_fcp_srr_error(fsp, fp);
1706                 return;
1707         }
1708
1709         if (fc_fcp_lock_pkt(fsp))
1710                 goto out;
1711
1712         fh = fc_frame_header_get(fp);
1713         /*
1714          * BUG? fc_fcp_srr_error calls exch_done which would release
1715          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1716          * then fc_exch_timeout would be sending an abort. The exch_done
1717          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1718          * an abort response though.
1719          */
1720         if (fh->fh_type == FC_TYPE_BLS) {
1721                 fc_fcp_unlock_pkt(fsp);
1722                 return;
1723         }
1724
1725         fsp->recov_seq = NULL;
1726         switch (fc_frame_payload_op(fp)) {
1727         case ELS_LS_ACC:
1728                 fsp->recov_retry = 0;
1729                 rec_tov = get_fsp_rec_tov(fsp);
1730                 fc_fcp_timer_set(fsp, rec_tov);
1731                 break;
1732         case ELS_LS_RJT:
1733         default:
1734                 fc_fcp_recovery(fsp, FC_ERROR);
1735                 break;
1736         }
1737         fc_fcp_unlock_pkt(fsp);
1738         fsp->lp->tt.exch_done(seq);
1739 out:
1740         fc_frame_free(fp);
1741         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding SRR */
1742 }
1743
1744 /**
1745  * fc_fcp_srr_error() - Handler for SRR errors
1746  * @fsp: The FCP packet that the SRR error is on
1747  * @fp:  The SRR frame
1748  */
1749 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1750 {
1751         if (fc_fcp_lock_pkt(fsp))
1752                 goto out;
1753         fsp->lp->tt.exch_done(fsp->recov_seq);
1754         fsp->recov_seq = NULL;
1755         switch (PTR_ERR(fp)) {
1756         case -FC_EX_TIMEOUT:
1757                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1758                         fc_fcp_rec(fsp);
1759                 else
1760                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1761                 break;
1762         case -FC_EX_CLOSED:                     /* e.g., link failure */
1763                 /* fall through */
1764         default:
1765                 fc_fcp_retry_cmd(fsp);
1766                 break;
1767         }
1768         fc_fcp_unlock_pkt(fsp);
1769 out:
1770         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding SRR */
1771 }
1772
1773 /**
1774  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1775  * @lport: The local port to be checked
1776  */
1777 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1778 {
1779         /* lock ? */
1780         return (lport->state == LPORT_ST_READY) &&
1781                 lport->link_up && !lport->qfull;
1782 }
1783
1784 /**
1785  * fc_queuecommand() - The queuecommand function of the SCSI template
1786  * @cmd:   The scsi_cmnd to be executed
1787  * @done:  The callback function to be called when the scsi_cmnd is complete
1788  *
1789  * This is the i/o strategy routine, called by the SCSI layer. This routine
1790  * is called with the host_lock held.
1791  */
1792 static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
1793 {
1794         struct fc_lport *lport;
1795         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1796         struct fc_fcp_pkt *fsp;
1797         struct fc_rport_libfc_priv *rpriv;
1798         int rval;
1799         int rc = 0;
1800         struct fcoe_dev_stats *stats;
1801
1802         lport = shost_priv(sc_cmd->device->host);
1803
1804         rval = fc_remote_port_chkready(rport);
1805         if (rval) {
1806                 sc_cmd->result = rval;
1807                 done(sc_cmd);
1808                 return 0;
1809         }
1810         spin_unlock_irq(lport->host->host_lock);
1811
1812         if (!*(struct fc_remote_port **)rport->dd_data) {
1813                 /*
1814                  * rport is transitioning from blocked/deleted to
1815                  * online
1816                  */
1817                 sc_cmd->result = DID_IMM_RETRY << 16;
1818                 done(sc_cmd);
1819                 goto out;
1820         }
1821
1822         rpriv = rport->dd_data;
1823
1824         if (!fc_fcp_lport_queue_ready(lport)) {
1825                 if (lport->qfull)
1826                         fc_fcp_can_queue_ramp_down(lport);
1827                 rc = SCSI_MLQUEUE_HOST_BUSY;
1828                 goto out;
1829         }
1830
1831         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1832         if (fsp == NULL) {
1833                 rc = SCSI_MLQUEUE_HOST_BUSY;
1834                 goto out;
1835         }
1836
1837         /*
1838          * build the libfc request pkt
1839          */
1840         fsp->cmd = sc_cmd;      /* save the cmd */
1841         fsp->lp = lport;        /* save the softc ptr */
1842         fsp->rport = rport;     /* set the remote port ptr */
1843         fsp->xfer_ddp = FC_XID_UNKNOWN;
1844         sc_cmd->scsi_done = done;
1845
1846         /*
1847          * set up the transfer length
1848          */
1849         fsp->data_len = scsi_bufflen(sc_cmd);
1850         fsp->xfer_len = 0;
1851
1852         /*
1853          * setup the data direction
1854          */
1855         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1856         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1857                 fsp->req_flags = FC_SRB_READ;
1858                 stats->InputRequests++;
1859                 stats->InputMegabytes += fsp->data_len;
1860         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1861                 fsp->req_flags = FC_SRB_WRITE;
1862                 stats->OutputRequests++;
1863                 stats->OutputMegabytes += fsp->data_len;
1864         } else {
1865                 fsp->req_flags = 0;
1866                 stats->ControlRequests++;
1867         }
1868         put_cpu();
1869
1870         fsp->tgt_flags = rpriv->flags;
1871
1872         init_timer(&fsp->timer);
1873         fsp->timer.data = (unsigned long)fsp;
1874
1875         /*
1876          * send it to the lower layer
1877          * if we get -1 return then put the request in the pending
1878          * queue.
1879          */
1880         rval = fc_fcp_pkt_send(lport, fsp);
1881         if (rval != 0) {
1882                 fsp->state = FC_SRB_FREE;
1883                 fc_fcp_pkt_release(fsp);
1884                 rc = SCSI_MLQUEUE_HOST_BUSY;
1885         }
1886 out:
1887         spin_lock_irq(lport->host->host_lock);
1888         return rc;
1889 }
1890
1891 DEF_SCSI_QCMD(fc_queuecommand)
1892 EXPORT_SYMBOL(fc_queuecommand);
1893
1894 /**
1895  * fc_io_compl() - Handle responses for completed commands
1896  * @fsp: The FCP packet that is complete
1897  *
1898  * Translates fcp_pkt errors to a Linux SCSI errors.
1899  * The fcp packet lock must be held when calling.
1900  */
1901 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1902 {
1903         struct fc_fcp_internal *si;
1904         struct scsi_cmnd *sc_cmd;
1905         struct fc_lport *lport;
1906         unsigned long flags;
1907
1908         /* release outstanding ddp context */
1909         fc_fcp_ddp_done(fsp);
1910
1911         fsp->state |= FC_SRB_COMPL;
1912         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1913                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1914                 del_timer_sync(&fsp->timer);
1915                 spin_lock_bh(&fsp->scsi_pkt_lock);
1916         }
1917
1918         lport = fsp->lp;
1919         si = fc_get_scsi_internal(lport);
1920
1921         /*
1922          * if can_queue ramp down is done then try can_queue ramp up
1923          * since commands are completing now.
1924          */
1925         if (si->last_can_queue_ramp_down_time)
1926                 fc_fcp_can_queue_ramp_up(lport);
1927
1928         sc_cmd = fsp->cmd;
1929         CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1930         switch (fsp->status_code) {
1931         case FC_COMPLETE:
1932                 if (fsp->cdb_status == 0) {
1933                         /*
1934                          * good I/O status
1935                          */
1936                         sc_cmd->result = DID_OK << 16;
1937                         if (fsp->scsi_resid)
1938                                 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1939                 } else {
1940                         /*
1941                          * transport level I/O was ok but scsi
1942                          * has non zero status
1943                          */
1944                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1945                 }
1946                 break;
1947         case FC_ERROR:
1948                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1949                            "due to FC_ERROR\n");
1950                 sc_cmd->result = DID_ERROR << 16;
1951                 break;
1952         case FC_DATA_UNDRUN:
1953                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1954                         /*
1955                          * scsi status is good but transport level
1956                          * underrun.
1957                          */
1958                         if (fsp->state & FC_SRB_RCV_STATUS) {
1959                                 sc_cmd->result = DID_OK << 16;
1960                         } else {
1961                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1962                                            " due to FC_DATA_UNDRUN (trans)\n");
1963                                 sc_cmd->result = DID_ERROR << 16;
1964                         }
1965                 } else {
1966                         /*
1967                          * scsi got underrun, this is an error
1968                          */
1969                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1970                                    "due to FC_DATA_UNDRUN (scsi)\n");
1971                         CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1972                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1973                 }
1974                 break;
1975         case FC_DATA_OVRRUN:
1976                 /*
1977                  * overrun is an error
1978                  */
1979                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1980                            "due to FC_DATA_OVRRUN\n");
1981                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1982                 break;
1983         case FC_CMD_ABORTED:
1984                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1985                           "due to FC_CMD_ABORTED\n");
1986                 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1987                 break;
1988         case FC_CMD_RESET:
1989                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1990                            "due to FC_CMD_RESET\n");
1991                 sc_cmd->result = (DID_RESET << 16);
1992                 break;
1993         case FC_HRD_ERROR:
1994                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1995                            "due to FC_HRD_ERROR\n");
1996                 sc_cmd->result = (DID_NO_CONNECT << 16);
1997                 break;
1998         case FC_CRC_ERROR:
1999                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2000                            "due to FC_CRC_ERROR\n");
2001                 sc_cmd->result = (DID_PARITY << 16);
2002                 break;
2003         case FC_TIMED_OUT:
2004                 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2005                            "due to FC_TIMED_OUT\n");
2006                 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2007                 break;
2008         default:
2009                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2010                            "due to unknown error\n");
2011                 sc_cmd->result = (DID_ERROR << 16);
2012                 break;
2013         }
2014
2015         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2016                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2017
2018         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2019         list_del(&fsp->list);
2020         sc_cmd->SCp.ptr = NULL;
2021         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2022         sc_cmd->scsi_done(sc_cmd);
2023
2024         /* release ref from initial allocation in queue command */
2025         fc_fcp_pkt_release(fsp);
2026 }
2027
2028 /**
2029  * fc_eh_abort() - Abort a command
2030  * @sc_cmd: The SCSI command to abort
2031  *
2032  * From SCSI host template.
2033  * Send an ABTS to the target device and wait for the response.
2034  */
2035 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2036 {
2037         struct fc_fcp_pkt *fsp;
2038         struct fc_lport *lport;
2039         struct fc_fcp_internal *si;
2040         int rc = FAILED;
2041         unsigned long flags;
2042
2043         lport = shost_priv(sc_cmd->device->host);
2044         if (lport->state != LPORT_ST_READY)
2045                 return rc;
2046         else if (!lport->link_up)
2047                 return rc;
2048
2049         si = fc_get_scsi_internal(lport);
2050         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2051         fsp = CMD_SP(sc_cmd);
2052         if (!fsp) {
2053                 /* command completed while scsi eh was setting up */
2054                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2055                 return SUCCESS;
2056         }
2057         /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2058         fc_fcp_pkt_hold(fsp);
2059         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2060
2061         if (fc_fcp_lock_pkt(fsp)) {
2062                 /* completed while we were waiting for timer to be deleted */
2063                 rc = SUCCESS;
2064                 goto release_pkt;
2065         }
2066
2067         rc = fc_fcp_pkt_abort(fsp);
2068         fc_fcp_unlock_pkt(fsp);
2069
2070 release_pkt:
2071         fc_fcp_pkt_release(fsp);
2072         return rc;
2073 }
2074 EXPORT_SYMBOL(fc_eh_abort);
2075
2076 /**
2077  * fc_eh_device_reset() - Reset a single LUN
2078  * @sc_cmd: The SCSI command which identifies the device whose
2079  *          LUN is to be reset
2080  *
2081  * Set from SCSI host template.
2082  */
2083 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2084 {
2085         struct fc_lport *lport;
2086         struct fc_fcp_pkt *fsp;
2087         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2088         int rc = FAILED;
2089         int rval;
2090
2091         rval = fc_remote_port_chkready(rport);
2092         if (rval)
2093                 goto out;
2094
2095         lport = shost_priv(sc_cmd->device->host);
2096
2097         if (lport->state != LPORT_ST_READY)
2098                 return rc;
2099
2100         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2101
2102         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2103         if (fsp == NULL) {
2104                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2105                 goto out;
2106         }
2107
2108         /*
2109          * Build the libfc request pkt. Do not set the scsi cmnd, because
2110          * the sc passed in is not setup for execution like when sent
2111          * through the queuecommand callout.
2112          */
2113         fsp->lp = lport;        /* save the softc ptr */
2114         fsp->rport = rport;     /* set the remote port ptr */
2115
2116         /*
2117          * flush outstanding commands
2118          */
2119         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2120         fsp->state = FC_SRB_FREE;
2121         fc_fcp_pkt_release(fsp);
2122
2123 out:
2124         return rc;
2125 }
2126 EXPORT_SYMBOL(fc_eh_device_reset);
2127
2128 /**
2129  * fc_eh_host_reset() - Reset a Scsi_Host.
2130  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2131  */
2132 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2133 {
2134         struct Scsi_Host *shost = sc_cmd->device->host;
2135         struct fc_lport *lport = shost_priv(shost);
2136         unsigned long wait_tmo;
2137
2138         FC_SCSI_DBG(lport, "Resetting host\n");
2139
2140         lport->tt.lport_reset(lport);
2141         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2142         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2143                                                                wait_tmo))
2144                 msleep(1000);
2145
2146         if (fc_fcp_lport_queue_ready(lport)) {
2147                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2148                              "on port (%6.6x)\n", lport->port_id);
2149                 return SUCCESS;
2150         } else {
2151                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2152                              "port (%6.6x) is not ready.\n",
2153                              lport->port_id);
2154                 return FAILED;
2155         }
2156 }
2157 EXPORT_SYMBOL(fc_eh_host_reset);
2158
2159 /**
2160  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2161  * @sdev: The SCSI device that identifies the SCSI host
2162  *
2163  * Configures queue depth based on host's cmd_per_len. If not set
2164  * then we use the libfc default.
2165  */
2166 int fc_slave_alloc(struct scsi_device *sdev)
2167 {
2168         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2169
2170         if (!rport || fc_remote_port_chkready(rport))
2171                 return -ENXIO;
2172
2173         if (sdev->tagged_supported)
2174                 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2175         else
2176                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2177                                         FC_FCP_DFLT_QUEUE_DEPTH);
2178
2179         return 0;
2180 }
2181 EXPORT_SYMBOL(fc_slave_alloc);
2182
2183 /**
2184  * fc_change_queue_depth() - Change a device's queue depth
2185  * @sdev:   The SCSI device whose queue depth is to change
2186  * @qdepth: The new queue depth
2187  * @reason: The resason for the change
2188  */
2189 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2190 {
2191         switch (reason) {
2192         case SCSI_QDEPTH_DEFAULT:
2193                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2194                 break;
2195         case SCSI_QDEPTH_QFULL:
2196                 scsi_track_queue_full(sdev, qdepth);
2197                 break;
2198         case SCSI_QDEPTH_RAMP_UP:
2199                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2200                 break;
2201         default:
2202                 return -EOPNOTSUPP;
2203         }
2204         return sdev->queue_depth;
2205 }
2206 EXPORT_SYMBOL(fc_change_queue_depth);
2207
2208 /**
2209  * fc_change_queue_type() - Change a device's queue type
2210  * @sdev:     The SCSI device whose queue depth is to change
2211  * @tag_type: Identifier for queue type
2212  */
2213 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2214 {
2215         if (sdev->tagged_supported) {
2216                 scsi_set_tag_type(sdev, tag_type);
2217                 if (tag_type)
2218                         scsi_activate_tcq(sdev, sdev->queue_depth);
2219                 else
2220                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
2221         } else
2222                 tag_type = 0;
2223
2224         return tag_type;
2225 }
2226 EXPORT_SYMBOL(fc_change_queue_type);
2227
2228 /**
2229  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2230  * @lport: The local port that no longer needs the FCP layer
2231  */
2232 void fc_fcp_destroy(struct fc_lport *lport)
2233 {
2234         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2235
2236         if (!list_empty(&si->scsi_pkt_queue))
2237                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2238                        "port (%6.6x)\n", lport->port_id);
2239
2240         mempool_destroy(si->scsi_pkt_pool);
2241         kfree(si);
2242         lport->scsi_priv = NULL;
2243 }
2244 EXPORT_SYMBOL(fc_fcp_destroy);
2245
2246 int fc_setup_fcp()
2247 {
2248         int rc = 0;
2249
2250         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2251                                             sizeof(struct fc_fcp_pkt),
2252                                             0, SLAB_HWCACHE_ALIGN, NULL);
2253         if (!scsi_pkt_cachep) {
2254                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2255                        "module load failed!");
2256                 rc = -ENOMEM;
2257         }
2258
2259         return rc;
2260 }
2261
2262 void fc_destroy_fcp()
2263 {
2264         if (scsi_pkt_cachep)
2265                 kmem_cache_destroy(scsi_pkt_cachep);
2266 }
2267
2268 /**
2269  * fc_fcp_init() - Initialize the FCP layer for a local port
2270  * @lport: The local port to initialize the exchange layer for
2271  */
2272 int fc_fcp_init(struct fc_lport *lport)
2273 {
2274         int rc;
2275         struct fc_fcp_internal *si;
2276
2277         if (!lport->tt.fcp_cmd_send)
2278                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2279
2280         if (!lport->tt.fcp_cleanup)
2281                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2282
2283         if (!lport->tt.fcp_abort_io)
2284                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2285
2286         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2287         if (!si)
2288                 return -ENOMEM;
2289         lport->scsi_priv = si;
2290         si->max_can_queue = lport->host->can_queue;
2291         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2292         spin_lock_init(&si->scsi_queue_lock);
2293
2294         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2295         if (!si->scsi_pkt_pool) {
2296                 rc = -ENOMEM;
2297                 goto free_internal;
2298         }
2299         return 0;
2300
2301 free_internal:
2302         kfree(si);
2303         return rc;
2304 }
2305 EXPORT_SYMBOL(fc_fcp_init);