drivers/regulator/ab8500.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * License Terms: GNU General Public License v2
   5  *
   6  * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
   7  *
   8  * AB8500 peripheral regulators
   9  *
  10  * AB8500 supports the following regulators,
  11  * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
  12  *        VAUX1/2/3, VANA
  13  *
  14  * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
  15  * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
  16  * accesses are through the DB8500 PRCMU I2C
  17  *
  18  */
  19 #include <linux/init.h>
  20 #include <linux/kernel.h>
  21 #include <linux/err.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/mfd/ab8500.h>
  24 #include <linux/regulator/driver.h>
  25 #include <linux/regulator/machine.h>
  26 #include <linux/regulator/ab8500.h>
  27
  28 /**
  29  * struct ab8500_regulator_info - ab8500 regulator information
  30  * @desc: regulator description
  31  * @ab8500: ab8500 parent
  32  * @regulator_dev: regulator device
  33  * @max_uV: maximum voltage (for variable voltage supplies)
  34  * @min_uV: minimum voltage (for variable voltage supplies)
  35  * @fixed_uV: typical voltage (for fixed voltage supplies)
  36  * @update_reg: register to control on/off
  37  * @mask: mask to enable/disable regulator
  38  * @enable: bits to enable the regulator in normal(high power) mode
  39  * @voltage_reg: register to control regulator voltage
  40  * @voltage_mask: mask to control regulator voltage
  41  * @supported_voltages: supported voltage table
  42  * @voltages_len: number of supported voltages for the regulator
  43  */
  44 struct ab8500_regulator_info {
  45         struct device           *dev;
  46         struct regulator_desc   desc;
  47         struct ab8500           *ab8500;
  48         struct regulator_dev    *regulator;
  49         int max_uV;
  50         int min_uV;
  51         int fixed_uV;
  52         int update_reg;
  53         int mask;
  54         int enable;
  55         int voltage_reg;
  56         int voltage_mask;
  57         int const *supported_voltages;
  58         int voltages_len;
  59 };
  60
  61 /* voltage tables for the vauxn/vintcore supplies */
  62 static const int ldo_vauxn_voltages[] = {
  63         1100000,
  64         1200000,
  65         1300000,
  66         1400000,
  67         1500000,
  68         1800000,
  69         1850000,
  70         1900000,
  71         2500000,
  72         2650000,
  73         2700000,
  74         2750000,
  75         2800000,
  76         2900000,
  77         3000000,
  78         3300000,
  79 };
  80
  81 static const int ldo_vintcore_voltages[] = {
  82         1200000,
  83         1225000,
  84         1250000,
  85         1275000,
  86         1300000,
  87         1325000,
  88         1350000,
  89 };
  90
  91 static int ab8500_regulator_enable(struct regulator_dev *rdev)
  92 {
  93         int regulator_id, ret;
  94         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
  95
  96         regulator_id = rdev_get_id(rdev);
  97         if (regulator_id >= AB8500_NUM_REGULATORS)
  98                 return -EINVAL;
  99
 100         ret = ab8500_set_bits(info->ab8500, info->update_reg,
 101                         info->mask, info->enable);
 102         if (ret < 0)
 103                 dev_err(rdev_get_dev(rdev),
 104                         "couldn't set enable bits for regulator\n");
 105         return ret;
 106 }
 107
 108 static int ab8500_regulator_disable(struct regulator_dev *rdev)
 109 {
 110         int regulator_id, ret;
 111         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 112
 113         regulator_id = rdev_get_id(rdev);
 114         if (regulator_id >= AB8500_NUM_REGULATORS)
 115                 return -EINVAL;
 116
 117         ret = ab8500_set_bits(info->ab8500, info->update_reg,
 118                         info->mask, 0x0);
 119         if (ret < 0)
 120                 dev_err(rdev_get_dev(rdev),
 121                         "couldn't set disable bits for regulator\n");
 122         return ret;
 123 }
 124
 125 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 126 {
 127         int regulator_id, ret;
 128         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 129
 130         regulator_id = rdev_get_id(rdev);
 131         if (regulator_id >= AB8500_NUM_REGULATORS)
 132                 return -EINVAL;
 133
 134         ret = ab8500_read(info->ab8500, info->update_reg);
 135         if (ret < 0) {
 136                 dev_err(rdev_get_dev(rdev),
 137                         "couldn't read 0x%x register\n", info->update_reg);
 138                 return ret;
 139         }
 140
 141         if (ret & info->mask)
 142                 return true;
 143         else
 144                 return false;
 145 }
 146
 147 static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 148 {
 149         int regulator_id;
 150         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 151
 152         regulator_id = rdev_get_id(rdev);
 153         if (regulator_id >= AB8500_NUM_REGULATORS)
 154                 return -EINVAL;
 155
 156         /* return the uV for the fixed regulators */
 157         if (info->fixed_uV)
 158                 return info->fixed_uV;
 159
 160         if (selector >= info->voltages_len)
 161                 return -EINVAL;
 162
 163         return info->supported_voltages[selector];
 164 }
 165
 166 static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
 167 {
 168         int regulator_id, ret, val;
 169         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 170
 171         regulator_id = rdev_get_id(rdev);
 172         if (regulator_id >= AB8500_NUM_REGULATORS)
 173                 return -EINVAL;
 174
 175         ret = ab8500_read(info->ab8500, info->voltage_reg);
 176         if (ret < 0) {
 177                 dev_err(rdev_get_dev(rdev),
 178                         "couldn't read voltage reg for regulator\n");
 179                 return ret;
 180         }
 181
 182         /* vintcore has a different layout */
 183         val = ret & info->voltage_mask;
 184         if (regulator_id == AB8500_LDO_INTCORE)
 185                 ret = info->supported_voltages[val >> 0x3];
 186         else
 187                 ret = info->supported_voltages[val];
 188
 189         return ret;
 190 }
 191
 192 static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
 193                 int min_uV, int max_uV)
 194 {
 195         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 196         int i;
 197
 198         /* check the supported voltage */
 199         for (i = 0; i < info->voltages_len; i++) {
 200                 if ((info->supported_voltages[i] >= min_uV) &&
 201                     (info->supported_voltages[i] <= max_uV))
 202                         return i;
 203         }
 204
 205         return -EINVAL;
 206 }
 207
 208 static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
 209                 int min_uV, int max_uV)
 210 {
 211         int regulator_id, ret;
 212         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 213
 214         regulator_id = rdev_get_id(rdev);
 215         if (regulator_id >= AB8500_NUM_REGULATORS)
 216                 return -EINVAL;
 217
 218         /* get the appropriate voltages within the range */
 219         ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
 220         if (ret < 0) {
 221                 dev_err(rdev_get_dev(rdev),
 222                                 "couldn't get best voltage for regulator\n");
 223                 return ret;
 224         }
 225
 226         /* set the registers for the request */
 227         ret = ab8500_set_bits(info->ab8500, info->voltage_reg,
 228                                 info->voltage_mask, ret);
 229         if (ret < 0)
 230                 dev_err(rdev_get_dev(rdev),
 231                 "couldn't set voltage reg for regulator\n");
 232
 233         return ret;
 234 }
 235
 236 static struct regulator_ops ab8500_regulator_ops = {
 237         .enable         = ab8500_regulator_enable,
 238         .disable        = ab8500_regulator_disable,
 239         .is_enabled     = ab8500_regulator_is_enabled,
 240         .get_voltage    = ab8500_regulator_get_voltage,
 241         .set_voltage    = ab8500_regulator_set_voltage,
 242         .list_voltage   = ab8500_list_voltage,
 243 };
 244
 245 static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
 246 {
 247         int regulator_id;
 248         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 249
 250         regulator_id = rdev_get_id(rdev);
 251         if (regulator_id >= AB8500_NUM_REGULATORS)
 252                 return -EINVAL;
 253
 254         return info->fixed_uV;
 255 }
 256
 257 static struct regulator_ops ab8500_ldo_fixed_ops = {
 258         .enable         = ab8500_regulator_enable,
 259         .disable        = ab8500_regulator_disable,
 260         .is_enabled     = ab8500_regulator_is_enabled,
 261         .get_voltage    = ab8500_fixed_get_voltage,
 262         .list_voltage   = ab8500_list_voltage,
 263 };
 264
 265 #define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable,    \
 266                 volt_reg, volt_mask, voltages,                  \
 267                         len_volts)                              \
 268 {                                                               \
 269         .desc   = {                                             \
 270                 .name   = "LDO-" #_id,                          \
 271                 .ops    = &ab8500_regulator_ops,                \
 272                 .type   = REGULATOR_VOLTAGE,                    \
 273                 .id     = AB8500_LDO_##_id,                     \
 274                 .owner  = THIS_MODULE,                          \
 275         },                                                      \
 276         .min_uV         = (min) * 1000,                         \
 277         .max_uV         = (max) * 1000,                         \
 278         .update_reg     = reg,                                  \
 279         .mask           = reg_mask,                             \
 280         .enable         = reg_enable,                           \
 281         .voltage_reg    = volt_reg,                             \
 282         .voltage_mask   = volt_mask,                            \
 283         .supported_voltages = voltages,                         \
 284         .voltages_len   = len_volts,                            \
 285         .fixed_uV       = 0,                                    \
 286 }
 287
 288 #define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask,     \
 289                                 reg_enable)             \
 290 {                                                       \
 291         .desc   = {                                     \
 292                 .name   = "LDO-" #_id,                  \
 293                 .ops    = &ab8500_ldo_fixed_ops,        \
 294                 .type   = REGULATOR_VOLTAGE,            \
 295                 .id     = AB8500_LDO_##_id,             \
 296                 .owner  = THIS_MODULE,                  \
 297         },                                              \
 298         .fixed_uV       = fixed * 1000,                 \
 299         .update_reg     = reg,                          \
 300         .mask           = reg_mask,                     \
 301         .enable         = reg_enable,                   \
 302 }
 303
 304 static struct ab8500_regulator_info ab8500_regulator_info[] = {
 305         /*
 306          * Variable Voltage LDOs
 307          * name, min uV, max uV, ctrl reg, reg mask, enable mask,
 308          *      volt ctrl reg, volt ctrl mask, volt table, num supported volts
 309          */
 310         AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf,
 311                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 312         AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf,
 313                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 314         AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf,
 315                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 316         AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38,
 317                 ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
 318
 319         /*
 320          * Fixed Voltage LDOs
 321          *               name,  o/p uV, ctrl reg, enable, disable
 322          */
 323         AB8500_FIXED_LDO(TVOUT,   2000,   0x0380,   0x2,    0x2),
 324         AB8500_FIXED_LDO(AUDIO,   2000,   0x0383,   0x2,    0x2),
 325         AB8500_FIXED_LDO(ANAMIC1, 2050,   0x0383,   0x4,    0x4),
 326         AB8500_FIXED_LDO(ANAMIC2, 2050,   0x0383,   0x8,    0x8),
 327         AB8500_FIXED_LDO(DMIC,    1800,   0x0383,   0x10,   0x10),
 328         AB8500_FIXED_LDO(ANA,     1200,   0x0383,   0xc,    0x4),
 329 };
 330
 331 static inline struct ab8500_regulator_info *find_regulator_info(int id)
 332 {
 333         struct ab8500_regulator_info *info;
 334         int i;
 335
 336         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 337                 info = &ab8500_regulator_info[i];
 338                 if (info->desc.id == id)
 339                         return info;
 340         }
 341         return NULL;
 342 }
 343
 344 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 345 {
 346         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 347         struct ab8500_platform_data *pdata;
 348         int i, err;
 349
 350         if (!ab8500) {
 351                 dev_err(&pdev->dev, "null mfd parent\n");
 352                 return -EINVAL;
 353         }
 354         pdata = dev_get_platdata(ab8500->dev);
 355
 356         /* register all regulators */
 357         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 358                 struct ab8500_regulator_info *info = NULL;
 359
 360                 /* assign per-regulator data */
 361                 info = &ab8500_regulator_info[i];
 362                 info->dev = &pdev->dev;
 363                 info->ab8500 = ab8500;
 364
 365                 info->regulator = regulator_register(&info->desc, &pdev->dev,
 366                                 pdata->regulator[i], info);
 367                 if (IS_ERR(info->regulator)) {
 368                         err = PTR_ERR(info->regulator);
 369                         dev_err(&pdev->dev, "failed to register regulator %s\n",
 370                                         info->desc.name);
 371                         /* when we fail, un-register all earlier regulators */
 372                         while (--i >= 0) {
 373                                 info = &ab8500_regulator_info[i];
 374                                 regulator_unregister(info->regulator);
 375                         }
 376                         return err;
 377                 }
 378         }
 379
 380         return 0;
 381 }
 382
 383 static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
 384 {
 385         int i;
 386
 387         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 388                 struct ab8500_regulator_info *info = NULL;
 389                 info = &ab8500_regulator_info[i];
 390                 regulator_unregister(info->regulator);
 391         }
 392
 393         return 0;
 394 }
 395
 396 static struct platform_driver ab8500_regulator_driver = {
 397         .probe = ab8500_regulator_probe,
 398         .remove = __devexit_p(ab8500_regulator_remove),
 399         .driver         = {
 400                 .name   = "ab8500-regulator",
 401                 .owner  = THIS_MODULE,
 402         },
 403 };
 404
 405 static int __init ab8500_regulator_init(void)
 406 {
 407         int ret;
 408
 409         ret = platform_driver_register(&ab8500_regulator_driver);
 410         if (ret != 0)
 411                 pr_err("Failed to register ab8500 regulator: %d\n", ret);
 412
 413         return ret;
 414 }
 415 subsys_initcall(ab8500_regulator_init);
 416
 417 static void __exit ab8500_regulator_exit(void)
 418 {
 419         platform_driver_unregister(&ab8500_regulator_driver);
 420 }
 421 module_exit(ab8500_regulator_exit);
 422
 423 MODULE_LICENSE("GPL v2");
 424 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
 425 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
 426 MODULE_ALIAS("platform:ab8500-regulator");