drivers/regulator/ab8500.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * License Terms: GNU General Public License v2
   5  *
   6  * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
   7  *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
   8  *
   9  * AB8500 peripheral regulators
  10  *
  11  * AB8500 supports the following regulators:
  12  *   VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
  13  */
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/err.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/mfd/abx500.h>
  20 #include <linux/mfd/abx500/ab8500.h>
  21 #include <linux/of.h>
  22 #include <linux/regulator/of_regulator.h>
  23 #include <linux/regulator/driver.h>
  24 #include <linux/regulator/machine.h>
  25 #include <linux/regulator/ab8500.h>
  26 #include <linux/slab.h>
  27
  28 /**
  29  * struct ab8500_regulator_info - ab8500 regulator information
  30  * @dev: device pointer
  31  * @desc: regulator description
  32  * @regulator_dev: regulator device
  33  * @update_bank: bank to control on/off
  34  * @update_reg: register to control on/off
  35  * @update_mask: mask to enable/disable regulator
  36  * @update_val_enable: bits to enable the regulator in normal (high power) mode
  37  * @voltage_bank: bank to control regulator voltage
  38  * @voltage_reg: register to control regulator voltage
  39  * @voltage_mask: mask to control regulator voltage
  40  * @delay: startup/set voltage delay in us
  41  */
  42 struct ab8500_regulator_info {
  43         struct device           *dev;
  44         struct regulator_desc   desc;
  45         struct regulator_dev    *regulator;
  46         u8 update_bank;
  47         u8 update_reg;
  48         u8 update_mask;
  49         u8 update_val_enable;
  50         u8 voltage_bank;
  51         u8 voltage_reg;
  52         u8 voltage_mask;
  53         unsigned int delay;
  54 };
  55
  56 /* voltage tables for the vauxn/vintcore supplies */
  57 static const unsigned int ldo_vauxn_voltages[] = {
  58         1100000,
  59         1200000,
  60         1300000,
  61         1400000,
  62         1500000,
  63         1800000,
  64         1850000,
  65         1900000,
  66         2500000,
  67         2650000,
  68         2700000,
  69         2750000,
  70         2800000,
  71         2900000,
  72         3000000,
  73         3300000,
  74 };
  75
  76 static const unsigned int ldo_vaux3_voltages[] = {
  77         1200000,
  78         1500000,
  79         1800000,
  80         2100000,
  81         2500000,
  82         2750000,
  83         2790000,
  84         2910000,
  85 };
  86
  87 static const unsigned int ldo_vintcore_voltages[] = {
  88         1200000,
  89         1225000,
  90         1250000,
  91         1275000,
  92         1300000,
  93         1325000,
  94         1350000,
  95 };
  96
  97 static int ab8500_regulator_enable(struct regulator_dev *rdev)
  98 {
  99         int ret;
 100         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 101
 102         if (info == NULL) {
 103                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 104                 return -EINVAL;
 105         }
 106
 107         ret = abx500_mask_and_set_register_interruptible(info->dev,
 108                 info->update_bank, info->update_reg,
 109                 info->update_mask, info->update_val_enable);
 110         if (ret < 0)
 111                 dev_err(rdev_get_dev(rdev),
 112                         "couldn't set enable bits for regulator\n");
 113
 114         dev_vdbg(rdev_get_dev(rdev),
 115                 "%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 116                 info->desc.name, info->update_bank, info->update_reg,
 117                 info->update_mask, info->update_val_enable);
 118
 119         return ret;
 120 }
 121
 122 static int ab8500_regulator_disable(struct regulator_dev *rdev)
 123 {
 124         int ret;
 125         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 126
 127         if (info == NULL) {
 128                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 129                 return -EINVAL;
 130         }
 131
 132         ret = abx500_mask_and_set_register_interruptible(info->dev,
 133                 info->update_bank, info->update_reg,
 134                 info->update_mask, 0x0);
 135         if (ret < 0)
 136                 dev_err(rdev_get_dev(rdev),
 137                         "couldn't set disable bits for regulator\n");
 138
 139         dev_vdbg(rdev_get_dev(rdev),
 140                 "%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 141                 info->desc.name, info->update_bank, info->update_reg,
 142                 info->update_mask, 0x0);
 143
 144         return ret;
 145 }
 146
 147 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 148 {
 149         int ret;
 150         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 151         u8 regval;
 152
 153         if (info == NULL) {
 154                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 155                 return -EINVAL;
 156         }
 157
 158         ret = abx500_get_register_interruptible(info->dev,
 159                 info->update_bank, info->update_reg, &regval);
 160         if (ret < 0) {
 161                 dev_err(rdev_get_dev(rdev),
 162                         "couldn't read 0x%x register\n", info->update_reg);
 163                 return ret;
 164         }
 165
 166         dev_vdbg(rdev_get_dev(rdev),
 167                 "%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
 168                 " 0x%x\n",
 169                 info->desc.name, info->update_bank, info->update_reg,
 170                 info->update_mask, regval);
 171
 172         if (regval & info->update_mask)
 173                 return true;
 174         else
 175                 return false;
 176 }
 177
 178 static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
 179 {
 180         int ret, val;
 181         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 182         u8 regval;
 183
 184         if (info == NULL) {
 185                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 186                 return -EINVAL;
 187         }
 188
 189         ret = abx500_get_register_interruptible(info->dev,
 190                         info->voltage_bank, info->voltage_reg, &regval);
 191         if (ret < 0) {
 192                 dev_err(rdev_get_dev(rdev),
 193                         "couldn't read voltage reg for regulator\n");
 194                 return ret;
 195         }
 196
 197         dev_vdbg(rdev_get_dev(rdev),
 198                 "%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
 199                 " 0x%x\n",
 200                 info->desc.name, info->voltage_bank, info->voltage_reg,
 201                 info->voltage_mask, regval);
 202
 203         /* vintcore has a different layout */
 204         val = regval & info->voltage_mask;
 205         if (info->desc.id == AB8500_LDO_INTCORE)
 206                 return val >> 0x3;
 207         else
 208                 return val;
 209 }
 210
 211 static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
 212                                             unsigned selector)
 213 {
 214         int ret;
 215         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 216         u8 regval;
 217
 218         if (info == NULL) {
 219                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 220                 return -EINVAL;
 221         }
 222
 223         /* set the registers for the request */
 224         regval = (u8)selector;
 225         ret = abx500_mask_and_set_register_interruptible(info->dev,
 226                         info->voltage_bank, info->voltage_reg,
 227                         info->voltage_mask, regval);
 228         if (ret < 0)
 229                 dev_err(rdev_get_dev(rdev),
 230                 "couldn't set voltage reg for regulator\n");
 231
 232         dev_vdbg(rdev_get_dev(rdev),
 233                 "%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
 234                 " 0x%x\n",
 235                 info->desc.name, info->voltage_bank, info->voltage_reg,
 236                 info->voltage_mask, regval);
 237
 238         return ret;
 239 }
 240
 241 static int ab8500_regulator_enable_time(struct regulator_dev *rdev)
 242 {
 243         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 244
 245         return info->delay;
 246 }
 247
 248 static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 249                                              unsigned int old_sel,
 250                                              unsigned int new_sel)
 251 {
 252         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 253
 254         return info->delay;
 255 }
 256
 257 static struct regulator_ops ab8500_regulator_ops = {
 258         .enable         = ab8500_regulator_enable,
 259         .disable        = ab8500_regulator_disable,
 260         .is_enabled     = ab8500_regulator_is_enabled,
 261         .get_voltage_sel = ab8500_regulator_get_voltage_sel,
 262         .set_voltage_sel = ab8500_regulator_set_voltage_sel,
 263         .list_voltage   = regulator_list_voltage_table,
 264         .enable_time    = ab8500_regulator_enable_time,
 265         .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
 266 };
 267
 268 static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
 269 {
 270         return rdev->desc->min_uV;
 271 }
 272
 273 static struct regulator_ops ab8500_regulator_fixed_ops = {
 274         .enable         = ab8500_regulator_enable,
 275         .disable        = ab8500_regulator_disable,
 276         .is_enabled     = ab8500_regulator_is_enabled,
 277         .get_voltage    = ab8500_fixed_get_voltage,
 278         .list_voltage   = regulator_list_voltage_linear,
 279         .enable_time    = ab8500_regulator_enable_time,
 280 };
 281
 282 static struct ab8500_regulator_info
 283                 ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
 284         /*
 285          * Variable Voltage Regulators
 286          *   name, min mV, max mV,
 287          *   update bank, reg, mask, enable val
 288          *   volt bank, reg, mask
 289          */
 290         [AB8500_LDO_AUX1] = {
 291                 .desc = {
 292                         .name           = "LDO-AUX1",
 293                         .ops            = &ab8500_regulator_ops,
 294                         .type           = REGULATOR_VOLTAGE,
 295                         .id             = AB8500_LDO_AUX1,
 296                         .owner          = THIS_MODULE,
 297                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
 298                         .volt_table     = ldo_vauxn_voltages,
 299                 },
 300                 .update_bank            = 0x04,
 301                 .update_reg             = 0x09,
 302                 .update_mask            = 0x03,
 303                 .update_val_enable      = 0x01,
 304                 .voltage_bank           = 0x04,
 305                 .voltage_reg            = 0x1f,
 306                 .voltage_mask           = 0x0f,
 307         },
 308         [AB8500_LDO_AUX2] = {
 309                 .desc = {
 310                         .name           = "LDO-AUX2",
 311                         .ops            = &ab8500_regulator_ops,
 312                         .type           = REGULATOR_VOLTAGE,
 313                         .id             = AB8500_LDO_AUX2,
 314                         .owner          = THIS_MODULE,
 315                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
 316                         .volt_table     = ldo_vauxn_voltages,
 317                 },
 318                 .update_bank            = 0x04,
 319                 .update_reg             = 0x09,
 320                 .update_mask            = 0x0c,
 321                 .update_val_enable      = 0x04,
 322                 .voltage_bank           = 0x04,
 323                 .voltage_reg            = 0x20,
 324                 .voltage_mask           = 0x0f,
 325         },
 326         [AB8500_LDO_AUX3] = {
 327                 .desc = {
 328                         .name           = "LDO-AUX3",
 329                         .ops            = &ab8500_regulator_ops,
 330                         .type           = REGULATOR_VOLTAGE,
 331                         .id             = AB8500_LDO_AUX3,
 332                         .owner          = THIS_MODULE,
 333                         .n_voltages     = ARRAY_SIZE(ldo_vaux3_voltages),
 334                         .volt_table     = ldo_vaux3_voltages,
 335                 },
 336                 .update_bank            = 0x04,
 337                 .update_reg             = 0x0a,
 338                 .update_mask            = 0x03,
 339                 .update_val_enable      = 0x01,
 340                 .voltage_bank           = 0x04,
 341                 .voltage_reg            = 0x21,
 342                 .voltage_mask           = 0x07,
 343         },
 344         [AB8500_LDO_INTCORE] = {
 345                 .desc = {
 346                         .name           = "LDO-INTCORE",
 347                         .ops            = &ab8500_regulator_ops,
 348                         .type           = REGULATOR_VOLTAGE,
 349                         .id             = AB8500_LDO_INTCORE,
 350                         .owner          = THIS_MODULE,
 351                         .n_voltages     = ARRAY_SIZE(ldo_vintcore_voltages),
 352                         .volt_table     = ldo_vintcore_voltages,
 353                 },
 354                 .update_bank            = 0x03,
 355                 .update_reg             = 0x80,
 356                 .update_mask            = 0x44,
 357                 .update_val_enable      = 0x04,
 358                 .voltage_bank           = 0x03,
 359                 .voltage_reg            = 0x80,
 360                 .voltage_mask           = 0x38,
 361         },
 362
 363         /*
 364          * Fixed Voltage Regulators
 365          *   name, fixed mV,
 366          *   update bank, reg, mask, enable val
 367          */
 368         [AB8500_LDO_TVOUT] = {
 369                 .desc = {
 370                         .name           = "LDO-TVOUT",
 371                         .ops            = &ab8500_regulator_fixed_ops,
 372                         .type           = REGULATOR_VOLTAGE,
 373                         .id             = AB8500_LDO_TVOUT,
 374                         .owner          = THIS_MODULE,
 375                         .n_voltages     = 1,
 376                         .min_uV         = 2000000,
 377                 },
 378                 .delay                  = 10000,
 379                 .update_bank            = 0x03,
 380                 .update_reg             = 0x80,
 381                 .update_mask            = 0x82,
 382                 .update_val_enable      = 0x02,
 383         },
 384         [AB8500_LDO_USB] = {
 385                 .desc = {
 386                         .name           = "LDO-USB",
 387                         .ops            = &ab8500_regulator_fixed_ops,
 388                         .type           = REGULATOR_VOLTAGE,
 389                         .id             = AB8500_LDO_USB,
 390                         .owner          = THIS_MODULE,
 391                         .n_voltages     = 1,
 392                         .min_uV         = 3300000,
 393                 },
 394                 .update_bank            = 0x03,
 395                 .update_reg             = 0x82,
 396                 .update_mask            = 0x03,
 397                 .update_val_enable      = 0x01,
 398         },
 399         [AB8500_LDO_AUDIO] = {
 400                 .desc = {
 401                         .name           = "LDO-AUDIO",
 402                         .ops            = &ab8500_regulator_fixed_ops,
 403                         .type           = REGULATOR_VOLTAGE,
 404                         .id             = AB8500_LDO_AUDIO,
 405                         .owner          = THIS_MODULE,
 406                         .n_voltages     = 1,
 407                         .min_uV         = 2000000,
 408                 },
 409                 .update_bank            = 0x03,
 410                 .update_reg             = 0x83,
 411                 .update_mask            = 0x02,
 412                 .update_val_enable      = 0x02,
 413         },
 414         [AB8500_LDO_ANAMIC1] = {
 415                 .desc = {
 416                         .name           = "LDO-ANAMIC1",
 417                         .ops            = &ab8500_regulator_fixed_ops,
 418                         .type           = REGULATOR_VOLTAGE,
 419                         .id             = AB8500_LDO_ANAMIC1,
 420                         .owner          = THIS_MODULE,
 421                         .n_voltages     = 1,
 422                         .min_uV         = 2050000,
 423                 },
 424                 .update_bank            = 0x03,
 425                 .update_reg             = 0x83,
 426                 .update_mask            = 0x08,
 427                 .update_val_enable      = 0x08,
 428         },
 429         [AB8500_LDO_ANAMIC2] = {
 430                 .desc = {
 431                         .name           = "LDO-ANAMIC2",
 432                         .ops            = &ab8500_regulator_fixed_ops,
 433                         .type           = REGULATOR_VOLTAGE,
 434                         .id             = AB8500_LDO_ANAMIC2,
 435                         .owner          = THIS_MODULE,
 436                         .n_voltages     = 1,
 437                         .min_uV         = 2050000,
 438                 },
 439                 .update_bank            = 0x03,
 440                 .update_reg             = 0x83,
 441                 .update_mask            = 0x10,
 442                 .update_val_enable      = 0x10,
 443         },
 444         [AB8500_LDO_DMIC] = {
 445                 .desc = {
 446                         .name           = "LDO-DMIC",
 447                         .ops            = &ab8500_regulator_fixed_ops,
 448                         .type           = REGULATOR_VOLTAGE,
 449                         .id             = AB8500_LDO_DMIC,
 450                         .owner          = THIS_MODULE,
 451                         .n_voltages     = 1,
 452                         .min_uV         = 1800000,
 453                 },
 454                 .update_bank            = 0x03,
 455                 .update_reg             = 0x83,
 456                 .update_mask            = 0x04,
 457                 .update_val_enable      = 0x04,
 458         },
 459         [AB8500_LDO_ANA] = {
 460                 .desc = {
 461                         .name           = "LDO-ANA",
 462                         .ops            = &ab8500_regulator_fixed_ops,
 463                         .type           = REGULATOR_VOLTAGE,
 464                         .id             = AB8500_LDO_ANA,
 465                         .owner          = THIS_MODULE,
 466                         .n_voltages     = 1,
 467                         .min_uV         = 1200000,
 468                 },
 469                 .update_bank            = 0x04,
 470                 .update_reg             = 0x06,
 471                 .update_mask            = 0x0c,
 472                 .update_val_enable      = 0x04,
 473         },
 474
 475
 476 };
 477
 478 struct ab8500_reg_init {
 479         u8 bank;
 480         u8 addr;
 481         u8 mask;
 482 };
 483
 484 #define REG_INIT(_id, _bank, _addr, _mask)      \
 485         [_id] = {                               \
 486                 .bank = _bank,                  \
 487                 .addr = _addr,                  \
 488                 .mask = _mask,                  \
 489         }
 490
 491 static struct ab8500_reg_init ab8500_reg_init[] = {
 492         /*
 493          * 0x30, VanaRequestCtrl
 494          * 0x0C, VpllRequestCtrl
 495          * 0xc0, VextSupply1RequestCtrl
 496          */
 497         REG_INIT(AB8500_REGUREQUESTCTRL2,       0x03, 0x04, 0xfc),
 498         /*
 499          * 0x03, VextSupply2RequestCtrl
 500          * 0x0c, VextSupply3RequestCtrl
 501          * 0x30, Vaux1RequestCtrl
 502          * 0xc0, Vaux2RequestCtrl
 503          */
 504         REG_INIT(AB8500_REGUREQUESTCTRL3,       0x03, 0x05, 0xff),
 505         /*
 506          * 0x03, Vaux3RequestCtrl
 507          * 0x04, SwHPReq
 508          */
 509         REG_INIT(AB8500_REGUREQUESTCTRL4,       0x03, 0x06, 0x07),
 510         /*
 511          * 0x08, VanaSysClkReq1HPValid
 512          * 0x20, Vaux1SysClkReq1HPValid
 513          * 0x40, Vaux2SysClkReq1HPValid
 514          * 0x80, Vaux3SysClkReq1HPValid
 515          */
 516         REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8),
 517         /*
 518          * 0x10, VextSupply1SysClkReq1HPValid
 519          * 0x20, VextSupply2SysClkReq1HPValid
 520          * 0x40, VextSupply3SysClkReq1HPValid
 521          */
 522         REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
 523         /*
 524          * 0x08, VanaHwHPReq1Valid
 525          * 0x20, Vaux1HwHPReq1Valid
 526          * 0x40, Vaux2HwHPReq1Valid
 527          * 0x80, Vaux3HwHPReq1Valid
 528          */
 529         REG_INIT(AB8500_REGUHWHPREQ1VALID1,     0x03, 0x09, 0xe8),
 530         /*
 531          * 0x01, VextSupply1HwHPReq1Valid
 532          * 0x02, VextSupply2HwHPReq1Valid
 533          * 0x04, VextSupply3HwHPReq1Valid
 534          */
 535         REG_INIT(AB8500_REGUHWHPREQ1VALID2,     0x03, 0x0a, 0x07),
 536         /*
 537          * 0x08, VanaHwHPReq2Valid
 538          * 0x20, Vaux1HwHPReq2Valid
 539          * 0x40, Vaux2HwHPReq2Valid
 540          * 0x80, Vaux3HwHPReq2Valid
 541          */
 542         REG_INIT(AB8500_REGUHWHPREQ2VALID1,     0x03, 0x0b, 0xe8),
 543         /*
 544          * 0x01, VextSupply1HwHPReq2Valid
 545          * 0x02, VextSupply2HwHPReq2Valid
 546          * 0x04, VextSupply3HwHPReq2Valid
 547          */
 548         REG_INIT(AB8500_REGUHWHPREQ2VALID2,     0x03, 0x0c, 0x07),
 549         /*
 550          * 0x20, VanaSwHPReqValid
 551          * 0x80, Vaux1SwHPReqValid
 552          */
 553         REG_INIT(AB8500_REGUSWHPREQVALID1,      0x03, 0x0d, 0xa0),
 554         /*
 555          * 0x01, Vaux2SwHPReqValid
 556          * 0x02, Vaux3SwHPReqValid
 557          * 0x04, VextSupply1SwHPReqValid
 558          * 0x08, VextSupply2SwHPReqValid
 559          * 0x10, VextSupply3SwHPReqValid
 560          */
 561         REG_INIT(AB8500_REGUSWHPREQVALID2,      0x03, 0x0e, 0x1f),
 562         /*
 563          * 0x02, SysClkReq2Valid1
 564          * ...
 565          * 0x80, SysClkReq8Valid1
 566          */
 567         REG_INIT(AB8500_REGUSYSCLKREQVALID1,    0x03, 0x0f, 0xfe),
 568         /*
 569          * 0x02, SysClkReq2Valid2
 570          * ...
 571          * 0x80, SysClkReq8Valid2
 572          */
 573         REG_INIT(AB8500_REGUSYSCLKREQVALID2,    0x03, 0x10, 0xfe),
 574         /*
 575          * 0x02, VTVoutEna
 576          * 0x04, Vintcore12Ena
 577          * 0x38, Vintcore12Sel
 578          * 0x40, Vintcore12LP
 579          * 0x80, VTVoutLP
 580          */
 581         REG_INIT(AB8500_REGUMISC1,              0x03, 0x80, 0xfe),
 582         /*
 583          * 0x02, VaudioEna
 584          * 0x04, VdmicEna
 585          * 0x08, Vamic1Ena
 586          * 0x10, Vamic2Ena
 587          */
 588         REG_INIT(AB8500_VAUDIOSUPPLY,           0x03, 0x83, 0x1e),
 589         /*
 590          * 0x01, Vamic1_dzout
 591          * 0x02, Vamic2_dzout
 592          */
 593         REG_INIT(AB8500_REGUCTRL1VAMIC,         0x03, 0x84, 0x03),
 594         /*
 595          * 0x0c, VanaRegu
 596          * 0x03, VpllRegu
 597          */
 598         REG_INIT(AB8500_VPLLVANAREGU,           0x04, 0x06, 0x0f),
 599         /*
 600          * 0x01, VrefDDREna
 601          * 0x02, VrefDDRSleepMode
 602          */
 603         REG_INIT(AB8500_VREFDDR,                0x04, 0x07, 0x03),
 604         /*
 605          * 0x03, VextSupply1Regu
 606          * 0x0c, VextSupply2Regu
 607          * 0x30, VextSupply3Regu
 608          * 0x40, ExtSupply2Bypass
 609          * 0x80, ExtSupply3Bypass
 610          */
 611         REG_INIT(AB8500_EXTSUPPLYREGU,          0x04, 0x08, 0xff),
 612         /*
 613          * 0x03, Vaux1Regu
 614          * 0x0c, Vaux2Regu
 615          */
 616         REG_INIT(AB8500_VAUX12REGU,             0x04, 0x09, 0x0f),
 617         /*
 618          * 0x03, Vaux3Regu
 619          */
 620         REG_INIT(AB8500_VRF1VAUX3REGU,          0x04, 0x0a, 0x03),
 621         /*
 622          * 0x3f, Vsmps1Sel1
 623          */
 624         REG_INIT(AB8500_VSMPS1SEL1,             0x04, 0x13, 0x3f),
 625         /*
 626          * 0x0f, Vaux1Sel
 627          */
 628         REG_INIT(AB8500_VAUX1SEL,               0x04, 0x1f, 0x0f),
 629         /*
 630          * 0x0f, Vaux2Sel
 631          */
 632         REG_INIT(AB8500_VAUX2SEL,               0x04, 0x20, 0x0f),
 633         /*
 634          * 0x07, Vaux3Sel
 635          */
 636         REG_INIT(AB8500_VRF1VAUX3SEL,           0x04, 0x21, 0x07),
 637         /*
 638          * 0x01, VextSupply12LP
 639          */
 640         REG_INIT(AB8500_REGUCTRL2SPARE,         0x04, 0x22, 0x01),
 641         /*
 642          * 0x04, Vaux1Disch
 643          * 0x08, Vaux2Disch
 644          * 0x10, Vaux3Disch
 645          * 0x20, Vintcore12Disch
 646          * 0x40, VTVoutDisch
 647          * 0x80, VaudioDisch
 648          */
 649         REG_INIT(AB8500_REGUCTRLDISCH,          0x04, 0x43, 0xfc),
 650         /*
 651          * 0x02, VanaDisch
 652          * 0x04, VdmicPullDownEna
 653          * 0x10, VdmicDisch
 654          */
 655         REG_INIT(AB8500_REGUCTRLDISCH2,         0x04, 0x44, 0x16),
 656 };
 657
 658 static __devinit int
 659 ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value)
 660 {
 661         int err;
 662
 663         if (value & ~ab8500_reg_init[id].mask) {
 664                 dev_err(&pdev->dev,
 665                         "Configuration error: value outside mask.\n");
 666                 return -EINVAL;
 667         }
 668
 669         err = abx500_mask_and_set_register_interruptible(
 670                 &pdev->dev,
 671                 ab8500_reg_init[id].bank,
 672                 ab8500_reg_init[id].addr,
 673                 ab8500_reg_init[id].mask,
 674                 value);
 675         if (err < 0) {
 676                 dev_err(&pdev->dev,
 677                         "Failed to initialize 0x%02x, 0x%02x.\n",
 678                         ab8500_reg_init[id].bank,
 679                         ab8500_reg_init[id].addr);
 680                 return err;
 681         }
 682
 683         dev_vdbg(&pdev->dev,
 684                 "init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
 685                 ab8500_reg_init[id].bank,
 686                 ab8500_reg_init[id].addr,
 687                 ab8500_reg_init[id].mask,
 688                 value);
 689
 690         return 0;
 691 }
 692
 693 static __devinit int ab8500_regulator_register(struct platform_device *pdev,
 694                                         struct regulator_init_data *init_data,
 695                                         int id,
 696                                         struct device_node *np)
 697 {
 698         struct ab8500_regulator_info *info = NULL;
 699         struct regulator_config config = { };
 700         int err;
 701
 702         /* assign per-regulator data */
 703         info = &ab8500_regulator_info[id];
 704         info->dev = &pdev->dev;
 705
 706         config.dev = &pdev->dev;
 707         config.init_data = init_data;
 708         config.driver_data = info;
 709         config.of_node = np;
 710
 711         /* fix for hardware before ab8500v2.0 */
 712         if (abx500_get_chip_id(info->dev) < 0x20) {
 713                 if (info->desc.id == AB8500_LDO_AUX3) {
 714                         info->desc.n_voltages =
 715                                 ARRAY_SIZE(ldo_vauxn_voltages);
 716                         info->desc.volt_table = ldo_vauxn_voltages;
 717                         info->voltage_mask = 0xf;
 718                 }
 719         }
 720
 721         /* register regulator with framework */
 722         info->regulator = regulator_register(&info->desc, &config);
 723         if (IS_ERR(info->regulator)) {
 724                 err = PTR_ERR(info->regulator);
 725                 dev_err(&pdev->dev, "failed to register regulator %s\n",
 726                         info->desc.name);
 727                 /* when we fail, un-register all earlier regulators */
 728                 while (--id >= 0) {
 729                         info = &ab8500_regulator_info[id];
 730                         regulator_unregister(info->regulator);
 731                 }
 732                 return err;
 733         }
 734
 735         return 0;
 736 }
 737
 738 static struct of_regulator_match ab8500_regulator_matches[] = {
 739         { .name = "ab8500_ldo_aux1",    .driver_data = (void *) AB8500_LDO_AUX1, },
 740         { .name = "ab8500_ldo_aux2",    .driver_data = (void *) AB8500_LDO_AUX2, },
 741         { .name = "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
 742         { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
 743         { .name = "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
 744         { .name = "ab8500_ldo_usb",     .driver_data = (void *) AB8500_LDO_USB, },
 745         { .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
 746         { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
 747         { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
 748         { .name = "ab8500_ldo_dmic",    .driver_data = (void *) AB8500_LDO_DMIC, },
 749         { .name = "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
 750 };
 751
 752 static __devinit int
 753 ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
 754 {
 755         int err, i;
 756
 757         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 758                 err = ab8500_regulator_register(
 759                         pdev, ab8500_regulator_matches[i].init_data,
 760                         i, ab8500_regulator_matches[i].of_node);
 761                 if (err)
 762                         return err;
 763         }
 764
 765         return 0;
 766 }
 767
 768 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 769 {
 770         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 771         struct ab8500_platform_data *pdata;
 772         struct device_node *np = pdev->dev.of_node;
 773         int i, err;
 774
 775         if (np) {
 776                 err = of_regulator_match(&pdev->dev, np,
 777                                         ab8500_regulator_matches,
 778                                         ARRAY_SIZE(ab8500_regulator_matches));
 779                 if (err < 0) {
 780                         dev_err(&pdev->dev,
 781                                 "Error parsing regulator init data: %d\n", err);
 782                         return err;
 783                 }
 784
 785                 err = ab8500_regulator_of_probe(pdev, np);
 786                 return err;
 787         }
 788
 789         if (!ab8500) {
 790                 dev_err(&pdev->dev, "null mfd parent\n");
 791                 return -EINVAL;
 792         }
 793         pdata = dev_get_platdata(ab8500->dev);
 794         if (!pdata) {
 795                 dev_err(&pdev->dev, "null pdata\n");
 796                 return -EINVAL;
 797         }
 798
 799         /* make sure the platform data has the correct size */
 800         if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
 801                 dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
 802                 return -EINVAL;
 803         }
 804
 805         /* initialize registers */
 806         for (i = 0; i < pdata->num_regulator_reg_init; i++) {
 807                 int id, value;
 808
 809                 id = pdata->regulator_reg_init[i].id;
 810                 value = pdata->regulator_reg_init[i].value;
 811
 812                 /* check for configuration errors */
 813                 if (id >= AB8500_NUM_REGULATOR_REGISTERS) {
 814                         dev_err(&pdev->dev,
 815                                 "Configuration error: id outside range.\n");
 816                         return -EINVAL;
 817                 }
 818
 819                 err = ab8500_regulator_init_registers(pdev, id, value);
 820                 if (err < 0)
 821                         return err;
 822         }
 823
 824         /* register all regulators */
 825         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 826                 err = ab8500_regulator_register(pdev, &pdata->regulator[i], i, NULL);
 827                 if (err < 0)
 828                         return err;
 829         }
 830
 831         return 0;
 832 }
 833
 834 static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
 835 {
 836         int i;
 837
 838         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 839                 struct ab8500_regulator_info *info = NULL;
 840                 info = &ab8500_regulator_info[i];
 841
 842                 dev_vdbg(rdev_get_dev(info->regulator),
 843                         "%s-remove\n", info->desc.name);
 844
 845                 regulator_unregister(info->regulator);
 846         }
 847
 848         return 0;
 849 }
 850
 851 static struct platform_driver ab8500_regulator_driver = {
 852         .probe = ab8500_regulator_probe,
 853         .remove = __devexit_p(ab8500_regulator_remove),
 854         .driver         = {
 855                 .name   = "ab8500-regulator",
 856                 .owner  = THIS_MODULE,
 857         },
 858 };
 859
 860 static int __init ab8500_regulator_init(void)
 861 {
 862         int ret;
 863
 864         ret = platform_driver_register(&ab8500_regulator_driver);
 865         if (ret != 0)
 866                 pr_err("Failed to register ab8500 regulator: %d\n", ret);
 867
 868         return ret;
 869 }
 870 subsys_initcall(ab8500_regulator_init);
 871
 872 static void __exit ab8500_regulator_exit(void)
 873 {
 874         platform_driver_unregister(&ab8500_regulator_driver);
 875 }
 876 module_exit(ab8500_regulator_exit);
 877
 878 MODULE_LICENSE("GPL v2");
 879 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
 880 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
 881 MODULE_ALIAS("platform:ab8500-regulator");