drivers/power/bq20z75.c

   1 /*
   2  * Gas Gauge driver for TI's BQ20Z75
   3  *
   4  * Copyright (c) 2010, NVIDIA Corporation.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful, but WITHOUT
  12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14  * more details.
  15  *
  16  * You should have received a copy of the GNU General Public License along
  17  * with this program; if not, write to the Free Software Foundation, Inc.,
  18  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  19  */
  20
  21 #include <linux/init.h>
  22 #include <linux/module.h>
  23 #include <linux/kernel.h>
  24 #include <linux/err.h>
  25 #include <linux/power_supply.h>
  26 #include <linux/i2c.h>
  27 #include <linux/slab.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/gpio.h>
  30
  31 #include <linux/power/bq20z75.h>
  32
  33 enum {
  34         REG_MANUFACTURER_DATA,
  35         REG_TEMPERATURE,
  36         REG_VOLTAGE,
  37         REG_CURRENT,
  38         REG_CAPACITY,
  39         REG_TIME_TO_EMPTY,
  40         REG_TIME_TO_FULL,
  41         REG_STATUS,
  42         REG_CYCLE_COUNT,
  43         REG_SERIAL_NUMBER,
  44         REG_REMAINING_CAPACITY,
  45         REG_REMAINING_CAPACITY_CHARGE,
  46         REG_FULL_CHARGE_CAPACITY,
  47         REG_FULL_CHARGE_CAPACITY_CHARGE,
  48         REG_DESIGN_CAPACITY,
  49         REG_DESIGN_CAPACITY_CHARGE,
  50         REG_DESIGN_VOLTAGE,
  51 };
  52
  53 /* Battery Mode defines */
  54 #define BATTERY_MODE_OFFSET             0x03
  55 #define BATTERY_MODE_MASK               0x8000
  56 enum bq20z75_battery_mode {
  57         BATTERY_MODE_AMPS,
  58         BATTERY_MODE_WATTS
  59 };
  60
  61 /* manufacturer access defines */
  62 #define MANUFACTURER_ACCESS_STATUS      0x0006
  63 #define MANUFACTURER_ACCESS_SLEEP       0x0011
  64
  65 /* battery status value bits */
  66 #define BATTERY_DISCHARGING             0x40
  67 #define BATTERY_FULL_CHARGED            0x20
  68 #define BATTERY_FULL_DISCHARGED         0x10
  69
  70 #define BQ20Z75_DATA(_psp, _addr, _min_value, _max_value) { \
  71         .psp = _psp, \
  72         .addr = _addr, \
  73         .min_value = _min_value, \
  74         .max_value = _max_value, \
  75 }
  76
  77 static const struct bq20z75_device_data {
  78         enum power_supply_property psp;
  79         u8 addr;
  80         int min_value;
  81         int max_value;
  82 } bq20z75_data[] = {
  83         [REG_MANUFACTURER_DATA] =
  84                 BQ20Z75_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
  85         [REG_TEMPERATURE] =
  86                 BQ20Z75_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
  87         [REG_VOLTAGE] =
  88                 BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
  89         [REG_CURRENT] =
  90                 BQ20Z75_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768,
  91                         32767),
  92         [REG_CAPACITY] =
  93                 BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100),
  94         [REG_REMAINING_CAPACITY] =
  95                 BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
  96         [REG_REMAINING_CAPACITY_CHARGE] =
  97                 BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
  98         [REG_FULL_CHARGE_CAPACITY] =
  99                 BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
 100         [REG_FULL_CHARGE_CAPACITY_CHARGE] =
 101                 BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
 102         [REG_TIME_TO_EMPTY] =
 103                 BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0,
 104                         65535),
 105         [REG_TIME_TO_FULL] =
 106                 BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0,
 107                         65535),
 108         [REG_STATUS] =
 109                 BQ20Z75_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
 110         [REG_CYCLE_COUNT] =
 111                 BQ20Z75_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
 112         [REG_DESIGN_CAPACITY] =
 113                 BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0,
 114                         65535),
 115         [REG_DESIGN_CAPACITY_CHARGE] =
 116                 BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0,
 117                         65535),
 118         [REG_DESIGN_VOLTAGE] =
 119                 BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0,
 120                         65535),
 121         [REG_SERIAL_NUMBER] =
 122                 BQ20Z75_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
 123 };
 124
 125 static enum power_supply_property bq20z75_properties[] = {
 126         POWER_SUPPLY_PROP_STATUS,
 127         POWER_SUPPLY_PROP_HEALTH,
 128         POWER_SUPPLY_PROP_PRESENT,
 129         POWER_SUPPLY_PROP_TECHNOLOGY,
 130         POWER_SUPPLY_PROP_CYCLE_COUNT,
 131         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 132         POWER_SUPPLY_PROP_CURRENT_NOW,
 133         POWER_SUPPLY_PROP_CAPACITY,
 134         POWER_SUPPLY_PROP_TEMP,
 135         POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
 136         POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
 137         POWER_SUPPLY_PROP_SERIAL_NUMBER,
 138         POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
 139         POWER_SUPPLY_PROP_ENERGY_NOW,
 140         POWER_SUPPLY_PROP_ENERGY_FULL,
 141         POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 142         POWER_SUPPLY_PROP_CHARGE_NOW,
 143         POWER_SUPPLY_PROP_CHARGE_FULL,
 144         POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 145 };
 146
 147 struct bq20z75_info {
 148         struct i2c_client               *client;
 149         struct power_supply             power_supply;
 150         struct bq20z75_platform_data    *pdata;
 151         bool                            is_present;
 152         bool                            gpio_detect;
 153         bool                            enable_detection;
 154         int                             irq;
 155 };
 156
 157 static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
 158 {
 159         struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 160         s32 ret = 0;
 161         int retries = 1;
 162
 163         if (bq20z75_device->pdata)
 164                 retries = max(bq20z75_device->pdata->i2c_retry_count + 1, 1);
 165
 166         while (retries > 0) {
 167                 ret = i2c_smbus_read_word_data(client, address);
 168                 if (ret >= 0)
 169                         break;
 170                 retries--;
 171         }
 172
 173         if (ret < 0) {
 174                 dev_dbg(&client->dev,
 175                         "%s: i2c read at address 0x%x failed\n",
 176                         __func__, address);
 177                 return ret;
 178         }
 179
 180         return le16_to_cpu(ret);
 181 }
 182
 183 static int bq20z75_write_word_data(struct i2c_client *client, u8 address,
 184         u16 value)
 185 {
 186         struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 187         s32 ret = 0;
 188         int retries = 1;
 189
 190         if (bq20z75_device->pdata)
 191                 retries = max(bq20z75_device->pdata->i2c_retry_count + 1, 1);
 192
 193         while (retries > 0) {
 194                 ret = i2c_smbus_write_word_data(client, address,
 195                         le16_to_cpu(value));
 196                 if (ret >= 0)
 197                         break;
 198                 retries--;
 199         }
 200
 201         if (ret < 0) {
 202                 dev_dbg(&client->dev,
 203                         "%s: i2c write to address 0x%x failed\n",
 204                         __func__, address);
 205                 return ret;
 206         }
 207
 208         return 0;
 209 }
 210
 211 static int bq20z75_get_battery_presence_and_health(
 212         struct i2c_client *client, enum power_supply_property psp,
 213         union power_supply_propval *val)
 214 {
 215         s32 ret;
 216         struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 217
 218         if (psp == POWER_SUPPLY_PROP_PRESENT &&
 219                 bq20z75_device->gpio_detect) {
 220                 ret = gpio_get_value(
 221                         bq20z75_device->pdata->battery_detect);
 222                 if (ret == bq20z75_device->pdata->battery_detect_present)
 223                         val->intval = 1;
 224                 else
 225                         val->intval = 0;
 226                 bq20z75_device->is_present = val->intval;
 227                 return ret;
 228         }
 229
 230         /* Write to ManufacturerAccess with
 231          * ManufacturerAccess command and then
 232          * read the status */
 233         ret = bq20z75_write_word_data(client,
 234                 bq20z75_data[REG_MANUFACTURER_DATA].addr,
 235                 MANUFACTURER_ACCESS_STATUS);
 236         if (ret < 0) {
 237                 if (psp == POWER_SUPPLY_PROP_PRESENT)
 238                         val->intval = 0; /* battery removed */
 239                 return ret;
 240         }
 241
 242         ret = bq20z75_read_word_data(client,
 243                 bq20z75_data[REG_MANUFACTURER_DATA].addr);
 244         if (ret < 0)
 245                 return ret;
 246
 247         if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value ||
 248             ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) {
 249                 val->intval = 0;
 250                 return 0;
 251         }
 252
 253         /* Mask the upper nibble of 2nd byte and
 254          * lower byte of response then
 255          * shift the result by 8 to get status*/
 256         ret &= 0x0F00;
 257         ret >>= 8;
 258         if (psp == POWER_SUPPLY_PROP_PRESENT) {
 259                 if (ret == 0x0F)
 260                         /* battery removed */
 261                         val->intval = 0;
 262                 else
 263                         val->intval = 1;
 264         } else if (psp == POWER_SUPPLY_PROP_HEALTH) {
 265                 if (ret == 0x09)
 266                         val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 267                 else if (ret == 0x0B)
 268                         val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
 269                 else if (ret == 0x0C)
 270                         val->intval = POWER_SUPPLY_HEALTH_DEAD;
 271                 else
 272                         val->intval = POWER_SUPPLY_HEALTH_GOOD;
 273         }
 274
 275         return 0;
 276 }
 277
 278 static int bq20z75_get_battery_property(struct i2c_client *client,
 279         int reg_offset, enum power_supply_property psp,
 280         union power_supply_propval *val)
 281 {
 282         s32 ret;
 283
 284         ret = bq20z75_read_word_data(client,
 285                 bq20z75_data[reg_offset].addr);
 286         if (ret < 0)
 287                 return ret;
 288
 289         /* returned values are 16 bit */
 290         if (bq20z75_data[reg_offset].min_value < 0)
 291                 ret = (s16)ret;
 292
 293         if (ret >= bq20z75_data[reg_offset].min_value &&
 294             ret <= bq20z75_data[reg_offset].max_value) {
 295                 val->intval = ret;
 296                 if (psp == POWER_SUPPLY_PROP_STATUS) {
 297                         if (ret & BATTERY_FULL_CHARGED)
 298                                 val->intval = POWER_SUPPLY_STATUS_FULL;
 299                         else if (ret & BATTERY_FULL_DISCHARGED)
 300                                 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 301                         else if (ret & BATTERY_DISCHARGING)
 302                                 val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 303                         else
 304                                 val->intval = POWER_SUPPLY_STATUS_CHARGING;
 305                 }
 306         } else {
 307                 if (psp == POWER_SUPPLY_PROP_STATUS)
 308                         val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 309                 else
 310                         val->intval = 0;
 311         }
 312
 313         return 0;
 314 }
 315
 316 static void  bq20z75_unit_adjustment(struct i2c_client *client,
 317         enum power_supply_property psp, union power_supply_propval *val)
 318 {
 319 #define BASE_UNIT_CONVERSION            1000
 320 #define BATTERY_MODE_CAP_MULT_WATT      (10 * BASE_UNIT_CONVERSION)
 321 #define TIME_UNIT_CONVERSION            60
 322 #define TEMP_KELVIN_TO_CELSIUS          2731
 323         switch (psp) {
 324         case POWER_SUPPLY_PROP_ENERGY_NOW:
 325         case POWER_SUPPLY_PROP_ENERGY_FULL:
 326         case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
 327                 /* bq20z75 provides energy in units of 10mWh.
 328                  * Convert to µWh
 329                  */
 330                 val->intval *= BATTERY_MODE_CAP_MULT_WATT;
 331                 break;
 332
 333         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 334         case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 335         case POWER_SUPPLY_PROP_CURRENT_NOW:
 336         case POWER_SUPPLY_PROP_CHARGE_NOW:
 337         case POWER_SUPPLY_PROP_CHARGE_FULL:
 338         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 339                 val->intval *= BASE_UNIT_CONVERSION;
 340                 break;
 341
 342         case POWER_SUPPLY_PROP_TEMP:
 343                 /* bq20z75 provides battery temperature in 0.1K
 344                  * so convert it to 0.1°C
 345                  */
 346                 val->intval -= TEMP_KELVIN_TO_CELSIUS;
 347                 break;
 348
 349         case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
 350         case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
 351                 /* bq20z75 provides time to empty and time to full in minutes.
 352                  * Convert to seconds
 353                  */
 354                 val->intval *= TIME_UNIT_CONVERSION;
 355                 break;
 356
 357         default:
 358                 dev_dbg(&client->dev,
 359                         "%s: no need for unit conversion %d\n", __func__, psp);
 360         }
 361 }
 362
 363 static enum bq20z75_battery_mode
 364 bq20z75_set_battery_mode(struct i2c_client *client,
 365         enum bq20z75_battery_mode mode)
 366 {
 367         int ret, original_val;
 368
 369         original_val = bq20z75_read_word_data(client, BATTERY_MODE_OFFSET);
 370         if (original_val < 0)
 371                 return original_val;
 372
 373         if ((original_val & BATTERY_MODE_MASK) == mode)
 374                 return mode;
 375
 376         if (mode == BATTERY_MODE_AMPS)
 377                 ret = original_val & ~BATTERY_MODE_MASK;
 378         else
 379                 ret = original_val | BATTERY_MODE_MASK;
 380
 381         ret = bq20z75_write_word_data(client, BATTERY_MODE_OFFSET, ret);
 382         if (ret < 0)
 383                 return ret;
 384
 385         return original_val & BATTERY_MODE_MASK;
 386 }
 387
 388 static int bq20z75_get_battery_capacity(struct i2c_client *client,
 389         int reg_offset, enum power_supply_property psp,
 390         union power_supply_propval *val)
 391 {
 392         s32 ret;
 393         enum bq20z75_battery_mode mode = BATTERY_MODE_WATTS;
 394
 395         if (power_supply_is_amp_property(psp))
 396                 mode = BATTERY_MODE_AMPS;
 397
 398         mode = bq20z75_set_battery_mode(client, mode);
 399         if (mode < 0)
 400                 return mode;
 401
 402         ret = bq20z75_read_word_data(client, bq20z75_data[reg_offset].addr);
 403         if (ret < 0)
 404                 return ret;
 405
 406         if (psp == POWER_SUPPLY_PROP_CAPACITY) {
 407                 /* bq20z75 spec says that this can be >100 %
 408                 * even if max value is 100 % */
 409                 val->intval = min(ret, 100);
 410         } else
 411                 val->intval = ret;
 412
 413         ret = bq20z75_set_battery_mode(client, mode);
 414         if (ret < 0)
 415                 return ret;
 416
 417         return 0;
 418 }
 419
 420 static char bq20z75_serial[5];
 421 static int bq20z75_get_battery_serial_number(struct i2c_client *client,
 422         union power_supply_propval *val)
 423 {
 424         int ret;
 425
 426         ret = bq20z75_read_word_data(client,
 427                 bq20z75_data[REG_SERIAL_NUMBER].addr);
 428         if (ret < 0)
 429                 return ret;
 430
 431         ret = sprintf(bq20z75_serial, "%04x", ret);
 432         val->strval = bq20z75_serial;
 433
 434         return 0;
 435 }
 436
 437 static int bq20z75_get_property_index(struct i2c_client *client,
 438         enum power_supply_property psp)
 439 {
 440         int count;
 441         for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++)
 442                 if (psp == bq20z75_data[count].psp)
 443                         return count;
 444
 445         dev_warn(&client->dev,
 446                 "%s: Invalid Property - %d\n", __func__, psp);
 447
 448         return -EINVAL;
 449 }
 450
 451 static int bq20z75_get_property(struct power_supply *psy,
 452         enum power_supply_property psp,
 453         union power_supply_propval *val)
 454 {
 455         int ret = 0;
 456         struct bq20z75_info *bq20z75_device = container_of(psy,
 457                                 struct bq20z75_info, power_supply);
 458         struct i2c_client *client = bq20z75_device->client;
 459
 460         switch (psp) {
 461         case POWER_SUPPLY_PROP_PRESENT:
 462         case POWER_SUPPLY_PROP_HEALTH:
 463                 ret = bq20z75_get_battery_presence_and_health(client, psp, val);
 464                 if (psp == POWER_SUPPLY_PROP_PRESENT)
 465                         return 0;
 466                 break;
 467
 468         case POWER_SUPPLY_PROP_TECHNOLOGY:
 469                 val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
 470                 break;
 471
 472         case POWER_SUPPLY_PROP_ENERGY_NOW:
 473         case POWER_SUPPLY_PROP_ENERGY_FULL:
 474         case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
 475         case POWER_SUPPLY_PROP_CHARGE_NOW:
 476         case POWER_SUPPLY_PROP_CHARGE_FULL:
 477         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 478         case POWER_SUPPLY_PROP_CAPACITY:
 479                 ret = bq20z75_get_property_index(client, psp);
 480                 if (ret < 0)
 481                         break;
 482
 483                 ret = bq20z75_get_battery_capacity(client, ret, psp, val);
 484                 break;
 485
 486         case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 487                 ret = bq20z75_get_battery_serial_number(client, val);
 488                 break;
 489
 490         case POWER_SUPPLY_PROP_STATUS:
 491         case POWER_SUPPLY_PROP_CYCLE_COUNT:
 492         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 493         case POWER_SUPPLY_PROP_CURRENT_NOW:
 494         case POWER_SUPPLY_PROP_TEMP:
 495         case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
 496         case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
 497         case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 498                 ret = bq20z75_get_property_index(client, psp);
 499                 if (ret < 0)
 500                         break;
 501
 502                 ret = bq20z75_get_battery_property(client, ret, psp, val);
 503                 break;
 504
 505         default:
 506                 dev_err(&client->dev,
 507                         "%s: INVALID property\n", __func__);
 508                 return -EINVAL;
 509         }
 510
 511         if (!bq20z75_device->enable_detection)
 512                 goto done;
 513
 514         if (!bq20z75_device->gpio_detect &&
 515                 bq20z75_device->is_present != (ret >= 0)) {
 516                 bq20z75_device->is_present = (ret >= 0);
 517                 power_supply_changed(&bq20z75_device->power_supply);
 518         }
 519
 520 done:
 521         if (!ret) {
 522                 /* Convert units to match requirements for power supply class */
 523                 bq20z75_unit_adjustment(client, psp, val);
 524         }
 525
 526         dev_dbg(&client->dev,
 527                 "%s: property = %d, value = %x\n", __func__, psp, val->intval);
 528
 529         if (ret && bq20z75_device->is_present)
 530                 return ret;
 531
 532         /* battery not present, so return NODATA for properties */
 533         if (ret)
 534                 return -ENODATA;
 535
 536         return 0;
 537 }
 538
 539 static irqreturn_t bq20z75_irq(int irq, void *devid)
 540 {
 541         struct power_supply *battery = devid;
 542
 543         power_supply_changed(battery);
 544
 545         return IRQ_HANDLED;
 546 }
 547
 548 static int __devinit bq20z75_probe(struct i2c_client *client,
 549         const struct i2c_device_id *id)
 550 {
 551         struct bq20z75_info *bq20z75_device;
 552         struct bq20z75_platform_data *pdata = client->dev.platform_data;
 553         int rc;
 554         int irq;
 555
 556         bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL);
 557         if (!bq20z75_device)
 558                 return -ENOMEM;
 559
 560         bq20z75_device->client = client;
 561         bq20z75_device->enable_detection = false;
 562         bq20z75_device->gpio_detect = false;
 563         bq20z75_device->power_supply.name = "battery";
 564         bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
 565         bq20z75_device->power_supply.properties = bq20z75_properties;
 566         bq20z75_device->power_supply.num_properties =
 567                 ARRAY_SIZE(bq20z75_properties);
 568         bq20z75_device->power_supply.get_property = bq20z75_get_property;
 569
 570         if (pdata) {
 571                 bq20z75_device->gpio_detect =
 572                         gpio_is_valid(pdata->battery_detect);
 573                 bq20z75_device->pdata = pdata;
 574         }
 575
 576         i2c_set_clientdata(client, bq20z75_device);
 577
 578         if (!bq20z75_device->gpio_detect)
 579                 goto skip_gpio;
 580
 581         rc = gpio_request(pdata->battery_detect, dev_name(&client->dev));
 582         if (rc) {
 583                 dev_warn(&client->dev, "Failed to request gpio: %d\n", rc);
 584                 bq20z75_device->gpio_detect = false;
 585                 goto skip_gpio;
 586         }
 587
 588         rc = gpio_direction_input(pdata->battery_detect);
 589         if (rc) {
 590                 dev_warn(&client->dev, "Failed to get gpio as input: %d\n", rc);
 591                 gpio_free(pdata->battery_detect);
 592                 bq20z75_device->gpio_detect = false;
 593                 goto skip_gpio;
 594         }
 595
 596         irq = gpio_to_irq(pdata->battery_detect);
 597         if (irq <= 0) {
 598                 dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
 599                 gpio_free(pdata->battery_detect);
 600                 bq20z75_device->gpio_detect = false;
 601                 goto skip_gpio;
 602         }
 603
 604         rc = request_irq(irq, bq20z75_irq,
 605                 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 606                 dev_name(&client->dev), &bq20z75_device->power_supply);
 607         if (rc) {
 608                 dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
 609                 gpio_free(pdata->battery_detect);
 610                 bq20z75_device->gpio_detect = false;
 611                 goto skip_gpio;
 612         }
 613
 614         bq20z75_device->irq = irq;
 615
 616 skip_gpio:
 617
 618         rc = power_supply_register(&client->dev, &bq20z75_device->power_supply);
 619         if (rc) {
 620                 dev_err(&client->dev,
 621                         "%s: Failed to register power supply\n", __func__);
 622                 goto exit_psupply;
 623         }
 624
 625         dev_info(&client->dev,
 626                 "%s: battery gas gauge device registered\n", client->name);
 627
 628         return 0;
 629
 630 exit_psupply:
 631         if (bq20z75_device->irq)
 632                 free_irq(bq20z75_device->irq, &bq20z75_device->power_supply);
 633         if (bq20z75_device->gpio_detect)
 634                 gpio_free(pdata->battery_detect);
 635
 636         kfree(bq20z75_device);
 637
 638         return rc;
 639 }
 640
 641 static int __devexit bq20z75_remove(struct i2c_client *client)
 642 {
 643         struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 644
 645         if (bq20z75_device->irq)
 646                 free_irq(bq20z75_device->irq, &bq20z75_device->power_supply);
 647         if (bq20z75_device->gpio_detect)
 648                 gpio_free(bq20z75_device->pdata->battery_detect);
 649
 650         power_supply_unregister(&bq20z75_device->power_supply);
 651         kfree(bq20z75_device);
 652         bq20z75_device = NULL;
 653
 654         return 0;
 655 }
 656
 657 #if defined CONFIG_PM
 658 static int bq20z75_suspend(struct i2c_client *client,
 659         pm_message_t state)
 660 {
 661         struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 662         s32 ret;
 663
 664         /* write to manufacturer access with sleep command */
 665         ret = bq20z75_write_word_data(client,
 666                 bq20z75_data[REG_MANUFACTURER_DATA].addr,
 667                 MANUFACTURER_ACCESS_SLEEP);
 668         if (bq20z75_device->is_present && ret < 0)
 669                 return ret;
 670
 671         return 0;
 672 }
 673 #else
 674 #define bq20z75_suspend         NULL
 675 #endif
 676 /* any smbus transaction will wake up bq20z75 */
 677 #define bq20z75_resume          NULL
 678
 679 static const struct i2c_device_id bq20z75_id[] = {
 680         { "bq20z75", 0 },
 681         {}
 682 };
 683 MODULE_DEVICE_TABLE(i2c, bq20z75_id);
 684
 685 static struct i2c_driver bq20z75_battery_driver = {
 686         .probe          = bq20z75_probe,
 687         .remove         = __devexit_p(bq20z75_remove),
 688         .suspend        = bq20z75_suspend,
 689         .resume         = bq20z75_resume,
 690         .id_table       = bq20z75_id,
 691         .driver = {
 692                 .name   = "bq20z75-battery",
 693         },
 694 };
 695
 696 static int __init bq20z75_battery_init(void)
 697 {
 698         return i2c_add_driver(&bq20z75_battery_driver);
 699 }
 700 module_init(bq20z75_battery_init);
 701
 702 static void __exit bq20z75_battery_exit(void)
 703 {
 704         i2c_del_driver(&bq20z75_battery_driver);
 705 }
 706 module_exit(bq20z75_battery_exit);
 707
 708 MODULE_DESCRIPTION("BQ20z75 battery monitor driver");
 709 MODULE_LICENSE("GPL");