Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', 'omap...
[pandora-kernel.git] / drivers / pcmcia / pxa2xx_cm_x270.c
1 /*
2  * linux/drivers/pcmcia/pxa/pxa_cm_x270.c
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  *
8  * Compulab Ltd., 2003, 2007
9  * Mike Rapoport <mike@compulab.co.il>
10  *
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/sched.h>
15 #include <linux/platform_device.h>
16 #include <linux/irq.h>
17 #include <linux/delay.h>
18
19 #include <pcmcia/ss.h>
20 #include <asm/hardware.h>
21
22 #include <asm/arch/pxa-regs.h>
23 #include <asm/arch/pxa2xx-gpio.h>
24 #include <asm/arch/cm-x270.h>
25
26 #include "soc_common.h"
27
28 static struct pcmcia_irqs irqs[] = {
29         { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
30         { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
31 };
32
33 static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
34 {
35         GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
36                 GPIO_bit(GPIO49_nPWE) |
37                 GPIO_bit(GPIO50_nPIOR) |
38                 GPIO_bit(GPIO51_nPIOW) |
39                 GPIO_bit(GPIO85_nPCE_1) |
40                 GPIO_bit(GPIO54_nPCE_2);
41
42         pxa_gpio_mode(GPIO48_nPOE_MD);
43         pxa_gpio_mode(GPIO49_nPWE_MD);
44         pxa_gpio_mode(GPIO50_nPIOR_MD);
45         pxa_gpio_mode(GPIO51_nPIOW_MD);
46         pxa_gpio_mode(GPIO85_nPCE_1_MD);
47         pxa_gpio_mode(GPIO54_nPCE_2_MD);
48         pxa_gpio_mode(GPIO55_nPREG_MD);
49         pxa_gpio_mode(GPIO56_nPWAIT_MD);
50         pxa_gpio_mode(GPIO57_nIOIS16_MD);
51
52         /* Reset signal */
53         pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
54         GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
55
56         set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
57         set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
58
59         /* irq's for slots: */
60         set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
61         set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
62
63         skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
64         return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
65 }
66
67 static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
68 {
69         soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
70
71         set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
72         set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
73
74         set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
75         set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
76 }
77
78
79 static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
80                                        struct pcmcia_state *state)
81 {
82         state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
83         state->ready  = (PCC_READY(skt->nr) == 0) ? 0 : 1;
84         state->bvd1   = 1;
85         state->bvd2   = 1;
86         state->vs_3v  = 0;
87         state->vs_Xv  = 0;
88         state->wrprot = 0;  /* not available */
89 }
90
91
92 static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
93                                           const socket_state_t *state)
94 {
95         GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
96         pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
97
98         switch (skt->nr) {
99         case 0:
100                 if (state->flags & SS_RESET) {
101                         GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
102                         GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
103                         udelay(10);
104                         GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
105                         GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
106                 }
107                 break;
108         case 1:
109                 if (state->flags & SS_RESET) {
110                         GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
111                         GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
112                         udelay(10);
113                         GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
114                         GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
115                 }
116                 break;
117         }
118
119         pxa_gpio_mode(GPIO49_nPWE_MD);
120
121         return 0;
122 }
123
124 static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
125 {
126 }
127
128 static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
129 {
130 }
131
132
133 static struct pcmcia_low_level cmx270_pcmcia_ops = {
134         .owner                  = THIS_MODULE,
135         .hw_init                = cmx270_pcmcia_hw_init,
136         .hw_shutdown            = cmx270_pcmcia_shutdown,
137         .socket_state           = cmx270_pcmcia_socket_state,
138         .configure_socket       = cmx270_pcmcia_configure_socket,
139         .socket_init            = cmx270_pcmcia_socket_init,
140         .socket_suspend         = cmx270_pcmcia_socket_suspend,
141         .nr                     = 2,
142 };
143
144 static struct platform_device *cmx270_pcmcia_device;
145
146 static int __init cmx270_pcmcia_init(void)
147 {
148         int ret;
149
150         cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
151
152         if (!cmx270_pcmcia_device)
153                 return -ENOMEM;
154
155         cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
156
157         printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
158         ret = platform_device_add(cmx270_pcmcia_device);
159
160         if (ret)
161                 platform_device_put(cmx270_pcmcia_device);
162
163         return ret;
164 }
165
166 static void __exit cmx270_pcmcia_exit(void)
167 {
168         platform_device_unregister(cmx270_pcmcia_device);
169 }
170
171 module_init(cmx270_pcmcia_init);
172 module_exit(cmx270_pcmcia_exit);
173
174 MODULE_LICENSE("GPL");
175 MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
176 MODULE_DESCRIPTION("CM-x270 PCMCIA driver");