iwlagn: free the Tx cmd when a non empty Tx queue is freed
[pandora-kernel.git] / drivers / net / wireless / iwlwifi / iwl-shared.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called LICENSE.GPL.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63 #ifndef __iwl_shared_h__
64 #define __iwl_shared_h__
65
66 #include <linux/types.h>
67 #include <linux/spinlock.h>
68 #include <linux/mutex.h>
69 #include <linux/gfp.h>
70 #include <linux/mm.h> /* for page_address */
71 #include <net/mac80211.h>
72
73 #include "iwl-commands.h"
74
75 /*This files includes all the types / functions that are exported by the
76  * upper layer to the bus and transport layer */
77
78 struct iwl_cfg;
79 struct iwl_bus;
80 struct iwl_priv;
81 struct iwl_sensitivity_ranges;
82 struct iwl_trans_ops;
83
84 #define DRV_NAME        "iwlagn"
85 #define IWLWIFI_VERSION "in-tree:"
86 #define DRV_COPYRIGHT   "Copyright(c) 2003-2011 Intel Corporation"
87 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
88
89 extern struct iwl_mod_params iwlagn_mod_params;
90
91 /**
92  * struct iwl_mod_params
93  * @sw_crypto: using hardware encryption, default = 0
94  * @num_of_queues: number of tx queue, HW dependent
95  * @disable_11n: 11n capabilities enabled, default = 0
96  * @amsdu_size_8K: enable 8K amsdu size, default = 1
97  * @antenna: both antennas (use diversity), default = 0
98  * @restart_fw: restart firmware, default = 1
99  * @plcp_check: enable plcp health check, default = true
100  * @ack_check: disable ack health check, default = false
101  * @wd_disable: enable stuck queue check, default = false
102  * @bt_coex_active: enable bt coex, default = true
103  * @led_mode: system default, default = 0
104  * @no_sleep_autoadjust: disable autoadjust, default = true
105  * @power_save: disable power save, default = false
106  * @power_level: power level, default = 1
107  * @debug_level: levels are IWL_DL_*
108  * @ant_coupling: antenna coupling in dB, default = 0
109  * @bt_ch_announce: BT channel inhibition, default = enable
110  * @wanted_ucode_alternative: ucode alternative to use, default = 1
111  * @auto_agg: enable agg. without check, default = true
112  */
113 struct iwl_mod_params {
114         int sw_crypto;
115         int num_of_queues;
116         int disable_11n;
117         int amsdu_size_8K;
118         int antenna;
119         int restart_fw;
120         bool plcp_check;
121         bool ack_check;
122         bool wd_disable;
123         bool bt_coex_active;
124         int led_mode;
125         bool no_sleep_autoadjust;
126         bool power_save;
127         int power_level;
128         u32 debug_level;
129         int ant_coupling;
130         bool bt_ch_announce;
131         int wanted_ucode_alternative;
132         bool auto_agg;
133 };
134
135 /**
136  * struct iwl_hw_params
137  * @max_txq_num: Max # Tx queues supported
138  * @num_ampdu_queues: num of ampdu queues
139  * @tx/rx_chains_num: Number of TX/RX chains
140  * @valid_tx/rx_ant: usable antennas
141  * @max_stations:
142  * @ht40_channel: is 40MHz width possible in band 2.4
143  * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
144  * @sku:
145  * @rx_page_order: Rx buffer page order
146  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
147  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
148  * @sw_crypto: 0 for hw, 1 for sw
149  * @max_xxx_size: for ucode uses
150  * @ct_kill_threshold: temperature threshold
151  * @wd_timeout: TX queues watchdog timeout
152  * @calib_init_cfg: setup initial calibrations for the hw
153  * @calib_rt_cfg: setup runtime calibrations for the hw
154  * @struct iwl_sensitivity_ranges: range of sensitivity values
155  */
156 struct iwl_hw_params {
157         u8  max_txq_num;
158         u8  num_ampdu_queues;
159         u8  tx_chains_num;
160         u8  rx_chains_num;
161         u8  valid_tx_ant;
162         u8  valid_rx_ant;
163         u8  max_stations;
164         u8  ht40_channel;
165         bool shadow_reg_enable;
166         u16 beacon_time_tsf_bits;
167         u16 sku;
168         u32 rx_page_order;
169         u32 max_inst_size;
170         u32 max_data_size;
171         u32 ct_kill_threshold; /* value in hw-dependent units */
172         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
173                                     /* for 1000, 6000 series and up */
174         unsigned int wd_timeout;
175
176         u32 calib_init_cfg;
177         u32 calib_rt_cfg;
178         const struct iwl_sensitivity_ranges *sens;
179 };
180
181 /**
182  * struct iwl_ht_agg - aggregation status while waiting for block-ack
183  * @txq_id: Tx queue used for Tx attempt
184  * @wait_for_ba: Expect block-ack before next Tx reply
185  * @rate_n_flags: Rate at which Tx was attempted
186  *
187  * If REPLY_TX indicates that aggregation was attempted, driver must wait
188  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
189  * until block ack arrives.
190  */
191 struct iwl_ht_agg {
192         u16 txq_id;
193         u16 wait_for_ba;
194         u32 rate_n_flags;
195 #define IWL_AGG_OFF 0
196 #define IWL_AGG_ON 1
197 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
198 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
199         u8 state;
200 };
201
202 struct iwl_tid_data {
203         u16 seq_number; /* agn only */
204         u16 tfds_in_queue;
205         struct iwl_ht_agg agg;
206 };
207
208 /**
209  * struct iwl_shared - shared fields for all the layers of the driver
210  *
211  * @dbg_level_dev: dbg level set per device. Prevails on
212  *      iwlagn_mod_params.debug_level if set (!= 0)
213  * @ucode_owner: IWL_OWNERSHIP_*
214  * @cmd_queue: command queue number
215  * @status: STATUS_*
216  * @valid_contexts: microcode/device supports multiple contexts
217  * @bus: pointer to the bus layer data
218  * @priv: pointer to the upper layer data
219  * @hw_params: see struct iwl_hw_params
220  * @workqueue: the workqueue used by all the layers of the driver
221  * @lock: protect general shared data
222  * @sta_lock: protects the station table.
223  *      If lock and sta_lock are needed, lock must be acquired first.
224  * @mutex:
225  */
226 struct iwl_shared {
227 #ifdef CONFIG_IWLWIFI_DEBUG
228         u32 dbg_level_dev;
229 #endif /* CONFIG_IWLWIFI_DEBUG */
230
231 #define IWL_OWNERSHIP_DRIVER    0
232 #define IWL_OWNERSHIP_TM        1
233         u8 ucode_owner;
234         u8 cmd_queue;
235         unsigned long status;
236         bool wowlan;
237         u8 valid_contexts;
238
239         struct iwl_bus *bus;
240         struct iwl_priv *priv;
241         struct iwl_trans *trans;
242         struct iwl_hw_params hw_params;
243
244         struct workqueue_struct *workqueue;
245         spinlock_t lock;
246         spinlock_t sta_lock;
247         struct mutex mutex;
248
249         /*these 2 shouldn't really be here, but they are needed for
250          * iwl_queue_stop, which is called from the upper layer too
251          */
252         u8 mac80211_registered;
253         struct ieee80211_hw *hw;
254
255         struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT];
256
257         wait_queue_head_t wait_command_queue;
258 };
259
260 /*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */
261 #define priv(_m)        ((_m)->shrd->priv)
262 #define bus(_m)         ((_m)->shrd->bus)
263 #define trans(_m)       ((_m)->shrd->trans)
264 #define hw_params(_m)   ((_m)->shrd->hw_params)
265
266 #ifdef CONFIG_IWLWIFI_DEBUG
267 /*
268  * iwl_get_debug_level: Return active debug level for device
269  *
270  * Using sysfs it is possible to set per device debug level. This debug
271  * level will be used if set, otherwise the global debug level which can be
272  * set via module parameter is used.
273  */
274 static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
275 {
276         if (shrd->dbg_level_dev)
277                 return shrd->dbg_level_dev;
278         else
279                 return iwlagn_mod_params.debug_level;
280 }
281 #else
282 static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
283 {
284         return iwlagn_mod_params.debug_level;
285 }
286 #endif
287
288 static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page)
289 {
290         free_pages(page, shrd->hw_params.rx_page_order);
291 }
292
293 /**
294  * iwl_queue_inc_wrap - increment queue index, wrap back to beginning
295  * @index -- current index
296  * @n_bd -- total number of entries in queue (must be power of 2)
297  */
298 static inline int iwl_queue_inc_wrap(int index, int n_bd)
299 {
300         return ++index & (n_bd - 1);
301 }
302
303 /**
304  * iwl_queue_dec_wrap - decrement queue index, wrap back to end
305  * @index -- current index
306  * @n_bd -- total number of entries in queue (must be power of 2)
307  */
308 static inline int iwl_queue_dec_wrap(int index, int n_bd)
309 {
310         return --index & (n_bd - 1);
311 }
312
313 struct iwl_rx_mem_buffer {
314         dma_addr_t page_dma;
315         struct page *page;
316         struct list_head list;
317 };
318
319 #define rxb_addr(r) page_address(r->page)
320
321 /*
322  * mac80211 queues, ACs, hardware queues, FIFOs.
323  *
324  * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
325  *
326  * Mac80211 uses the following numbers, which we get as from it
327  * by way of skb_get_queue_mapping(skb):
328  *
329  *      VO      0
330  *      VI      1
331  *      BE      2
332  *      BK      3
333  *
334  *
335  * Regular (not A-MPDU) frames are put into hardware queues corresponding
336  * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
337  * own queue per aggregation session (RA/TID combination), such queues are
338  * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
339  * order to map frames to the right queue, we also need an AC->hw queue
340  * mapping. This is implemented here.
341  *
342  * Due to the way hw queues are set up (by the hw specific modules like
343  * iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity
344  * mapping.
345  */
346
347 static const u8 tid_to_ac[] = {
348         IEEE80211_AC_BE,
349         IEEE80211_AC_BK,
350         IEEE80211_AC_BK,
351         IEEE80211_AC_BE,
352         IEEE80211_AC_VI,
353         IEEE80211_AC_VI,
354         IEEE80211_AC_VO,
355         IEEE80211_AC_VO
356 };
357
358 static inline int get_ac_from_tid(u16 tid)
359 {
360         if (likely(tid < ARRAY_SIZE(tid_to_ac)))
361                 return tid_to_ac[tid];
362
363         /* no support for TIDs 8-15 yet */
364         return -EINVAL;
365 }
366
367 enum iwl_rxon_context_id {
368         IWL_RXON_CTX_BSS,
369         IWL_RXON_CTX_PAN,
370
371         NUM_IWL_RXON_CTX
372 };
373
374 #ifdef CONFIG_PM
375 int iwl_suspend(struct iwl_priv *priv);
376 int iwl_resume(struct iwl_priv *priv);
377 #endif /* !CONFIG_PM */
378
379 int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
380                 struct iwl_cfg *cfg);
381 void __devexit iwl_remove(struct iwl_priv * priv);
382
383 void iwl_rx_dispatch(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
384 int iwlagn_hw_valid_rtc_data_addr(u32 addr);
385 void iwl_start_tx_ba_trans_ready(struct iwl_priv *priv,
386                                  enum iwl_rxon_context_id ctx,
387                                  u8 sta_id, u8 tid);
388 void iwl_stop_tx_ba_trans_ready(struct iwl_priv *priv,
389                                 enum iwl_rxon_context_id ctx,
390                                 u8 sta_id, u8 tid);
391 void iwl_set_hw_rfkill_state(struct iwl_priv *priv, bool state);
392 void iwl_nic_config(struct iwl_priv *priv);
393 void iwl_free_skb(struct iwl_priv *priv, struct sk_buff *skb);
394 void iwl_apm_stop(struct iwl_priv *priv);
395 int iwl_apm_init(struct iwl_priv *priv);
396 void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand);
397 const char *get_cmd_string(u8 cmd);
398 bool iwl_check_for_ct_kill(struct iwl_priv *priv);
399
400 #ifdef CONFIG_IWLWIFI_DEBUGFS
401 void iwl_reset_traffic_log(struct iwl_priv *priv);
402 #endif /* CONFIG_IWLWIFI_DEBUGFS */
403
404 #ifdef CONFIG_IWLWIFI_DEBUG
405 void iwl_print_rx_config_cmd(struct iwl_priv *priv, u8 ctxid);
406 #else
407 static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, u8 ctxid)
408 {
409 }
410 #endif
411
412 #define IWL_CMD(x) case x: return #x
413 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
414
415 #define IWL_TRAFFIC_ENTRIES     (256)
416 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
417
418 /*****************************************************
419 * DRIVER STATUS FUNCTIONS
420 ******************************************************/
421 #define STATUS_HCMD_ACTIVE      0       /* host command in progress */
422 /* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
423 #define STATUS_INT_ENABLED      2
424 #define STATUS_RF_KILL_HW       3
425 #define STATUS_CT_KILL          4
426 #define STATUS_INIT             5
427 #define STATUS_ALIVE            6
428 #define STATUS_READY            7
429 #define STATUS_TEMPERATURE      8
430 #define STATUS_GEO_CONFIGURED   9
431 #define STATUS_EXIT_PENDING     10
432 #define STATUS_STATISTICS       12
433 #define STATUS_SCANNING         13
434 #define STATUS_SCAN_ABORTING    14
435 #define STATUS_SCAN_HW          15
436 #define STATUS_POWER_PMI        16
437 #define STATUS_FW_ERROR         17
438 #define STATUS_DEVICE_ENABLED   18
439 #define STATUS_CHANNEL_SWITCH_PENDING 19
440
441 static inline int iwl_is_ready(struct iwl_shared *shrd)
442 {
443         /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
444          * set but EXIT_PENDING is not */
445         return test_bit(STATUS_READY, &shrd->status) &&
446                test_bit(STATUS_GEO_CONFIGURED, &shrd->status) &&
447                !test_bit(STATUS_EXIT_PENDING, &shrd->status);
448 }
449
450 static inline int iwl_is_alive(struct iwl_shared *shrd)
451 {
452         return test_bit(STATUS_ALIVE, &shrd->status);
453 }
454
455 static inline int iwl_is_init(struct iwl_shared *shrd)
456 {
457         return test_bit(STATUS_INIT, &shrd->status);
458 }
459
460 static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd)
461 {
462         return test_bit(STATUS_RF_KILL_HW, &shrd->status);
463 }
464
465 static inline int iwl_is_rfkill(struct iwl_shared *shrd)
466 {
467         return iwl_is_rfkill_hw(shrd);
468 }
469
470 static inline int iwl_is_ctkill(struct iwl_shared *shrd)
471 {
472         return test_bit(STATUS_CT_KILL, &shrd->status);
473 }
474
475 static inline int iwl_is_ready_rf(struct iwl_shared *shrd)
476 {
477         if (iwl_is_rfkill(shrd))
478                 return 0;
479
480         return iwl_is_ready(shrd);
481 }
482
483 #endif /* #__iwl_shared_h__ */