iwlwifi: fix set_tx_power vs scan
[pandora-kernel.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  * Please use iwl-4965-hw.h for hardware-related definitions.
30  */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-agn-hw.h"
47 #include "iwl-led.h"
48 #include "iwl-power.h"
49 #include "iwl-agn-rs.h"
50 #include "iwl-agn-tt.h"
51
52 struct iwl_tx_queue;
53
54 /* CT-KILL constants */
55 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
56 #define CT_KILL_THRESHOLD          114 /* in Celsius */
57 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
58
59 /* Default noise level to report when noise measurement is not available.
60  *   This may be because we're:
61  *   1)  Not associated (4965, no beacon statistics being sent to driver)
62  *   2)  Scanning (noise measurement does not apply to associated channel)
63  *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
64  * Use default noise value of -127 ... this is below the range of measurable
65  *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
66  *   Also, -127 works better than 0 when averaging frames with/without
67  *   noise info (e.g. averaging might be done in app); measured dBm values are
68  *   always negative ... using a negative value as the default keeps all
69  *   averages within an s8's (used in some apps) range of negative values. */
70 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
71
72 /*
73  * RTS threshold here is total size [2347] minus 4 FCS bytes
74  * Per spec:
75  *   a value of 0 means RTS on all data/management packets
76  *   a value > max MSDU size means no RTS
77  * else RTS for data/management frames where MPDU is larger
78  *   than RTS value.
79  */
80 #define DEFAULT_RTS_THRESHOLD     2347U
81 #define MIN_RTS_THRESHOLD         0U
82 #define MAX_RTS_THRESHOLD         2347U
83 #define MAX_MSDU_SIZE             2304U
84 #define MAX_MPDU_SIZE             2346U
85 #define DEFAULT_BEACON_INTERVAL   100U
86 #define DEFAULT_SHORT_RETRY_LIMIT 7U
87 #define DEFAULT_LONG_RETRY_LIMIT  4U
88
89 struct iwl_rx_mem_buffer {
90         dma_addr_t page_dma;
91         struct page *page;
92         struct list_head list;
93 };
94
95 #define rxb_addr(r) page_address(r->page)
96
97 /* defined below */
98 struct iwl_device_cmd;
99
100 struct iwl_cmd_meta {
101         /* only for SYNC commands, iff the reply skb is wanted */
102         struct iwl_host_cmd *source;
103         /*
104          * only for ASYNC commands
105          * (which is somewhat stupid -- look at iwl-sta.c for instance
106          * which duplicates a bunch of code because the callback isn't
107          * invoked for SYNC commands, if it were and its result passed
108          * through it would be simpler...)
109          */
110         void (*callback)(struct iwl_priv *priv,
111                          struct iwl_device_cmd *cmd,
112                          struct iwl_rx_packet *pkt);
113
114         /* The CMD_SIZE_HUGE flag bit indicates that the command
115          * structure is stored at the end of the shared queue memory. */
116         u32 flags;
117
118         DEFINE_DMA_UNMAP_ADDR(mapping);
119         DEFINE_DMA_UNMAP_LEN(len);
120 };
121
122 /*
123  * Generic queue structure
124  *
125  * Contains common data for Rx and Tx queues
126  */
127 struct iwl_queue {
128         int n_bd;              /* number of BDs in this queue */
129         int write_ptr;       /* 1-st empty entry (index) host_w*/
130         int read_ptr;         /* last used entry (index) host_r*/
131         /* use for monitoring and recovering the stuck queue */
132         int last_read_ptr;      /* storing the last read_ptr */
133         /* number of time read_ptr and last_read_ptr are the same */
134         u8 repeat_same_read_ptr;
135         dma_addr_t dma_addr;   /* physical addr for BD's */
136         int n_window;          /* safe queue window */
137         u32 id;
138         int low_mark;          /* low watermark, resume queue if free
139                                 * space more than this */
140         int high_mark;         /* high watermark, stop queue if free
141                                 * space less than this */
142 } __packed;
143
144 /* One for each TFD */
145 struct iwl_tx_info {
146         struct sk_buff *skb;
147         struct iwl_rxon_context *ctx;
148 };
149
150 /**
151  * struct iwl_tx_queue - Tx Queue for DMA
152  * @q: generic Rx/Tx queue descriptor
153  * @bd: base of circular buffer of TFDs
154  * @cmd: array of command/TX buffer pointers
155  * @meta: array of meta data for each command/tx buffer
156  * @dma_addr_cmd: physical address of cmd/tx buffer array
157  * @txb: array of per-TFD driver data
158  * @need_update: indicates need to update read/write index
159  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
160  *
161  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
162  * descriptors) and required locking structures.
163  */
164 #define TFD_TX_CMD_SLOTS 256
165 #define TFD_CMD_SLOTS 32
166
167 struct iwl_tx_queue {
168         struct iwl_queue q;
169         void *tfds;
170         struct iwl_device_cmd **cmd;
171         struct iwl_cmd_meta *meta;
172         struct iwl_tx_info *txb;
173         u8 need_update;
174         u8 sched_retry;
175         u8 active;
176         u8 swq_id;
177 };
178
179 #define IWL_NUM_SCAN_RATES         (2)
180
181 struct iwl4965_channel_tgd_info {
182         u8 type;
183         s8 max_power;
184 };
185
186 struct iwl4965_channel_tgh_info {
187         s64 last_radar_time;
188 };
189
190 #define IWL4965_MAX_RATE (33)
191
192 struct iwl3945_clip_group {
193         /* maximum power level to prevent clipping for each rate, derived by
194          *   us from this band's saturation power in EEPROM */
195         const s8 clip_powers[IWL_MAX_RATES];
196 };
197
198 /* current Tx power values to use, one for each rate for each channel.
199  * requested power is limited by:
200  * -- regulatory EEPROM limits for this channel
201  * -- hardware capabilities (clip-powers)
202  * -- spectrum management
203  * -- user preference (e.g. iwconfig)
204  * when requested power is set, base power index must also be set. */
205 struct iwl3945_channel_power_info {
206         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
207         s8 power_table_index;   /* actual (compenst'd) index into gain table */
208         s8 base_power_index;    /* gain index for power at factory temp. */
209         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
210 };
211
212 /* current scan Tx power values to use, one for each scan rate for each
213  * channel. */
214 struct iwl3945_scan_power_info {
215         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
216         s8 power_table_index;   /* actual (compenst'd) index into gain table */
217         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
218 };
219
220 /*
221  * One for each channel, holds all channel setup data
222  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
223  *     with one another!
224  */
225 struct iwl_channel_info {
226         struct iwl4965_channel_tgd_info tgd;
227         struct iwl4965_channel_tgh_info tgh;
228         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
229         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
230                                                  * HT40 channel */
231
232         u8 channel;       /* channel number */
233         u8 flags;         /* flags copied from EEPROM */
234         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
235         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
236         s8 min_power;     /* always 0 */
237         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
238
239         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
240         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
241         enum ieee80211_band band;
242
243         /* HT40 channel info */
244         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
245         u8 ht40_flags;          /* flags copied from EEPROM */
246         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
247
248         /* Radio/DSP gain settings for each "normal" data Tx rate.
249          * These include, in addition to RF and DSP gain, a few fields for
250          *   remembering/modifying gain settings (indexes). */
251         struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
252
253         /* Radio/DSP gain settings for each scan rate, for directed scans. */
254         struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
255 };
256
257 #define IWL_TX_FIFO_BK          0       /* shared */
258 #define IWL_TX_FIFO_BE          1
259 #define IWL_TX_FIFO_VI          2       /* shared */
260 #define IWL_TX_FIFO_VO          3
261 #define IWL_TX_FIFO_BK_IPAN     IWL_TX_FIFO_BK
262 #define IWL_TX_FIFO_BE_IPAN     4
263 #define IWL_TX_FIFO_VI_IPAN     IWL_TX_FIFO_VI
264 #define IWL_TX_FIFO_VO_IPAN     5
265 #define IWL_TX_FIFO_UNUSED      -1
266
267 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
268  * Set the minimum to accommodate the 4 standard TX queues, 1 command
269  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
270 #define IWL_MIN_NUM_QUEUES      10
271
272 /*
273  * Command queue depends on iPAN support.
274  */
275 #define IWL_DEFAULT_CMD_QUEUE_NUM       4
276 #define IWL_IPAN_CMD_QUEUE_NUM          9
277
278 /*
279  * This queue number is required for proper operation
280  * because the ucode will stop/start the scheduler as
281  * required.
282  */
283 #define IWL_IPAN_MCAST_QUEUE            8
284
285 #define IEEE80211_DATA_LEN              2304
286 #define IEEE80211_4ADDR_LEN             30
287 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
288 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
289
290 struct iwl_frame {
291         union {
292                 struct ieee80211_hdr frame;
293                 struct iwl_tx_beacon_cmd beacon;
294                 u8 raw[IEEE80211_FRAME_LEN];
295                 u8 cmd[360];
296         } u;
297         struct list_head list;
298 };
299
300 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
301 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
302 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
303
304 enum {
305         CMD_SYNC = 0,
306         CMD_SIZE_NORMAL = 0,
307         CMD_NO_SKB = 0,
308         CMD_SIZE_HUGE = (1 << 0),
309         CMD_ASYNC = (1 << 1),
310         CMD_WANT_SKB = (1 << 2),
311 };
312
313 #define DEF_CMD_PAYLOAD_SIZE 320
314
315 /**
316  * struct iwl_device_cmd
317  *
318  * For allocation of the command and tx queues, this establishes the overall
319  * size of the largest command we send to uCode, except for a scan command
320  * (which is relatively huge; space is allocated separately).
321  */
322 struct iwl_device_cmd {
323         struct iwl_cmd_header hdr;      /* uCode API */
324         union {
325                 u32 flags;
326                 u8 val8;
327                 u16 val16;
328                 u32 val32;
329                 struct iwl_tx_cmd tx;
330                 struct iwl6000_channel_switch_cmd chswitch;
331                 u8 payload[DEF_CMD_PAYLOAD_SIZE];
332         } __packed cmd;
333 } __packed;
334
335 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
336
337
338 struct iwl_host_cmd {
339         const void *data;
340         unsigned long reply_page;
341         void (*callback)(struct iwl_priv *priv,
342                          struct iwl_device_cmd *cmd,
343                          struct iwl_rx_packet *pkt);
344         u32 flags;
345         u16 len;
346         u8 id;
347 };
348
349 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
350 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
351 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
352
353 /**
354  * struct iwl_rx_queue - Rx queue
355  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
356  * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
357  * @read: Shared index to newest available Rx buffer
358  * @write: Shared index to oldest written Rx packet
359  * @free_count: Number of pre-allocated buffers in rx_free
360  * @rx_free: list of free SKBs for use
361  * @rx_used: List of Rx buffers with no SKB
362  * @need_update: flag to indicate we need to update read/write index
363  * @rb_stts: driver's pointer to receive buffer status
364  * @rb_stts_dma: bus address of receive buffer status
365  *
366  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
367  */
368 struct iwl_rx_queue {
369         __le32 *bd;
370         dma_addr_t bd_dma;
371         struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
372         struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
373         u32 read;
374         u32 write;
375         u32 free_count;
376         u32 write_actual;
377         struct list_head rx_free;
378         struct list_head rx_used;
379         int need_update;
380         struct iwl_rb_status *rb_stts;
381         dma_addr_t rb_stts_dma;
382         spinlock_t lock;
383 };
384
385 #define IWL_SUPPORTED_RATES_IE_LEN         8
386
387 #define MAX_TID_COUNT        9
388
389 #define IWL_INVALID_RATE     0xFF
390 #define IWL_INVALID_VALUE    -1
391
392 /**
393  * struct iwl_ht_agg -- aggregation status while waiting for block-ack
394  * @txq_id: Tx queue used for Tx attempt
395  * @frame_count: # frames attempted by Tx command
396  * @wait_for_ba: Expect block-ack before next Tx reply
397  * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
398  * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
399  * @bitmap1: High order, one bit for each frame pending ACK in Tx window
400  * @rate_n_flags: Rate at which Tx was attempted
401  *
402  * If REPLY_TX indicates that aggregation was attempted, driver must wait
403  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
404  * until block ack arrives.
405  */
406 struct iwl_ht_agg {
407         u16 txq_id;
408         u16 frame_count;
409         u16 wait_for_ba;
410         u16 start_idx;
411         u64 bitmap;
412         u32 rate_n_flags;
413 #define IWL_AGG_OFF 0
414 #define IWL_AGG_ON 1
415 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
416 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
417         u8 state;
418 };
419
420
421 struct iwl_tid_data {
422         u16 seq_number; /* agn only */
423         u16 tfds_in_queue;
424         struct iwl_ht_agg agg;
425 };
426
427 struct iwl_hw_key {
428         u32 cipher;
429         int keylen;
430         u8 keyidx;
431         u8 key[32];
432 };
433
434 union iwl_ht_rate_supp {
435         u16 rates;
436         struct {
437                 u8 siso_rate;
438                 u8 mimo_rate;
439         };
440 };
441
442 #define CFG_HT_RX_AMPDU_FACTOR_8K   (0x0)
443 #define CFG_HT_RX_AMPDU_FACTOR_16K  (0x1)
444 #define CFG_HT_RX_AMPDU_FACTOR_32K  (0x2)
445 #define CFG_HT_RX_AMPDU_FACTOR_64K  (0x3)
446 #define CFG_HT_RX_AMPDU_FACTOR_DEF  CFG_HT_RX_AMPDU_FACTOR_64K
447 #define CFG_HT_RX_AMPDU_FACTOR_MAX  CFG_HT_RX_AMPDU_FACTOR_64K
448 #define CFG_HT_RX_AMPDU_FACTOR_MIN  CFG_HT_RX_AMPDU_FACTOR_8K
449
450 /*
451  * Maximal MPDU density for TX aggregation
452  * 4 - 2us density
453  * 5 - 4us density
454  * 6 - 8us density
455  * 7 - 16us density
456  */
457 #define CFG_HT_MPDU_DENSITY_2USEC   (0x4)
458 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
459 #define CFG_HT_MPDU_DENSITY_8USEC   (0x6)
460 #define CFG_HT_MPDU_DENSITY_16USEC  (0x7)
461 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
462 #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
463 #define CFG_HT_MPDU_DENSITY_MIN     (0x1)
464
465 struct iwl_ht_config {
466         bool single_chain_sufficient;
467         enum ieee80211_smps_mode smps; /* current smps mode */
468 };
469
470 /* QoS structures */
471 struct iwl_qos_info {
472         int qos_active;
473         struct iwl_qosparam_cmd def_qos_parm;
474 };
475
476 /*
477  * Structure should be accessed with sta_lock held. When station addition
478  * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
479  * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
480  * held.
481  */
482 struct iwl_station_entry {
483         struct iwl_addsta_cmd sta;
484         struct iwl_tid_data tid[MAX_TID_COUNT];
485         u8 used, ctxid;
486         struct iwl_hw_key keyinfo;
487         struct iwl_link_quality_cmd *lq;
488 };
489
490 struct iwl_station_priv_common {
491         struct iwl_rxon_context *ctx;
492         u8 sta_id;
493 };
494
495 /*
496  * iwl_station_priv: Driver's private station information
497  *
498  * When mac80211 creates a station it reserves some space (hw->sta_data_size)
499  * in the structure for use by driver. This structure is places in that
500  * space.
501  *
502  * The common struct MUST be first because it is shared between
503  * 3945 and agn!
504  */
505 struct iwl_station_priv {
506         struct iwl_station_priv_common common;
507         struct iwl_lq_sta lq_sta;
508         atomic_t pending_frames;
509         bool client;
510         bool asleep;
511 };
512
513 /**
514  * struct iwl_vif_priv - driver's private per-interface information
515  *
516  * When mac80211 allocates a virtual interface, it can allocate
517  * space for us to put data into.
518  */
519 struct iwl_vif_priv {
520         struct iwl_rxon_context *ctx;
521         u8 ibss_bssid_sta_id;
522 };
523
524 /* one for each uCode image (inst/data, boot/init/runtime) */
525 struct fw_desc {
526         void *v_addr;           /* access by driver */
527         dma_addr_t p_addr;      /* access by card's busmaster DMA */
528         u32 len;                /* bytes */
529 };
530
531 /* v1/v2 uCode file layout */
532 struct iwl_ucode_header {
533         __le32 ver;     /* major/minor/API/serial */
534         union {
535                 struct {
536                         __le32 inst_size;       /* bytes of runtime code */
537                         __le32 data_size;       /* bytes of runtime data */
538                         __le32 init_size;       /* bytes of init code */
539                         __le32 init_data_size;  /* bytes of init data */
540                         __le32 boot_size;       /* bytes of bootstrap code */
541                         u8 data[0];             /* in same order as sizes */
542                 } v1;
543                 struct {
544                         __le32 build;           /* build number */
545                         __le32 inst_size;       /* bytes of runtime code */
546                         __le32 data_size;       /* bytes of runtime data */
547                         __le32 init_size;       /* bytes of init code */
548                         __le32 init_data_size;  /* bytes of init data */
549                         __le32 boot_size;       /* bytes of bootstrap code */
550                         u8 data[0];             /* in same order as sizes */
551                 } v2;
552         } u;
553 };
554
555 /*
556  * new TLV uCode file layout
557  *
558  * The new TLV file format contains TLVs, that each specify
559  * some piece of data. To facilitate "groups", for example
560  * different instruction image with different capabilities,
561  * bundled with the same init image, an alternative mechanism
562  * is provided:
563  * When the alternative field is 0, that means that the item
564  * is always valid. When it is non-zero, then it is only
565  * valid in conjunction with items of the same alternative,
566  * in which case the driver (user) selects one alternative
567  * to use.
568  */
569
570 enum iwl_ucode_tlv_type {
571         IWL_UCODE_TLV_INVALID           = 0, /* unused */
572         IWL_UCODE_TLV_INST              = 1,
573         IWL_UCODE_TLV_DATA              = 2,
574         IWL_UCODE_TLV_INIT              = 3,
575         IWL_UCODE_TLV_INIT_DATA         = 4,
576         IWL_UCODE_TLV_BOOT              = 5,
577         IWL_UCODE_TLV_PROBE_MAX_LEN     = 6, /* a u32 value */
578         IWL_UCODE_TLV_PAN               = 7,
579         IWL_UCODE_TLV_RUNT_EVTLOG_PTR   = 8,
580         IWL_UCODE_TLV_RUNT_EVTLOG_SIZE  = 9,
581         IWL_UCODE_TLV_RUNT_ERRLOG_PTR   = 10,
582         IWL_UCODE_TLV_INIT_EVTLOG_PTR   = 11,
583         IWL_UCODE_TLV_INIT_EVTLOG_SIZE  = 12,
584         IWL_UCODE_TLV_INIT_ERRLOG_PTR   = 13,
585         IWL_UCODE_TLV_ENHANCE_SENS_TBL  = 14,
586         IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
587 };
588
589 struct iwl_ucode_tlv {
590         __le16 type;            /* see above */
591         __le16 alternative;     /* see comment */
592         __le32 length;          /* not including type/length fields */
593         u8 data[0];
594 } __packed;
595
596 #define IWL_TLV_UCODE_MAGIC     0x0a4c5749
597
598 struct iwl_tlv_ucode_header {
599         /*
600          * The TLV style ucode header is distinguished from
601          * the v1/v2 style header by first four bytes being
602          * zero, as such is an invalid combination of
603          * major/minor/API/serial versions.
604          */
605         __le32 zero;
606         __le32 magic;
607         u8 human_readable[64];
608         __le32 ver;             /* major/minor/API/serial */
609         __le32 build;
610         __le64 alternatives;    /* bitmask of valid alternatives */
611         /*
612          * The data contained herein has a TLV layout,
613          * see above for the TLV header and types.
614          * Note that each TLV is padded to a length
615          * that is a multiple of 4 for alignment.
616          */
617         u8 data[0];
618 };
619
620 struct iwl4965_ibss_seq {
621         u8 mac[ETH_ALEN];
622         u16 seq_num;
623         u16 frag_num;
624         unsigned long packet_time;
625         struct list_head list;
626 };
627
628 struct iwl_sensitivity_ranges {
629         u16 min_nrg_cck;
630         u16 max_nrg_cck;
631
632         u16 nrg_th_cck;
633         u16 nrg_th_ofdm;
634
635         u16 auto_corr_min_ofdm;
636         u16 auto_corr_min_ofdm_mrc;
637         u16 auto_corr_min_ofdm_x1;
638         u16 auto_corr_min_ofdm_mrc_x1;
639
640         u16 auto_corr_max_ofdm;
641         u16 auto_corr_max_ofdm_mrc;
642         u16 auto_corr_max_ofdm_x1;
643         u16 auto_corr_max_ofdm_mrc_x1;
644
645         u16 auto_corr_max_cck;
646         u16 auto_corr_max_cck_mrc;
647         u16 auto_corr_min_cck;
648         u16 auto_corr_min_cck_mrc;
649
650         u16 barker_corr_th_min;
651         u16 barker_corr_th_min_mrc;
652         u16 nrg_th_cca;
653 };
654
655
656 #define KELVIN_TO_CELSIUS(x) ((x)-273)
657 #define CELSIUS_TO_KELVIN(x) ((x)+273)
658
659
660 /**
661  * struct iwl_hw_params
662  * @max_txq_num: Max # Tx queues supported
663  * @dma_chnl_num: Number of Tx DMA/FIFO channels
664  * @scd_bc_tbls_size: size of scheduler byte count tables
665  * @tfd_size: TFD size
666  * @tx/rx_chains_num: Number of TX/RX chains
667  * @valid_tx/rx_ant: usable antennas
668  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
669  * @max_rxq_log: Log-base-2 of max_rxq_size
670  * @rx_page_order: Rx buffer page order
671  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
672  * @max_stations:
673  * @ht40_channel: is 40MHz width possible in band 2.4
674  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
675  * @sw_crypto: 0 for hw, 1 for sw
676  * @max_xxx_size: for ucode uses
677  * @ct_kill_threshold: temperature threshold
678  * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
679  * @calib_init_cfg: setup initial calibrations for the hw
680  * @calib_rt_cfg: setup runtime calibrations for the hw
681  * @struct iwl_sensitivity_ranges: range of sensitivity values
682  */
683 struct iwl_hw_params {
684         u8 max_txq_num;
685         u8 dma_chnl_num;
686         u16 scd_bc_tbls_size;
687         u32 tfd_size;
688         u8  tx_chains_num;
689         u8  rx_chains_num;
690         u8  valid_tx_ant;
691         u8  valid_rx_ant;
692         u16 max_rxq_size;
693         u16 max_rxq_log;
694         u32 rx_page_order;
695         u32 rx_wrt_ptr_reg;
696         u8  max_stations;
697         u8  ht40_channel;
698         u8  max_beacon_itrvl;   /* in 1024 ms */
699         u32 max_inst_size;
700         u32 max_data_size;
701         u32 max_bsm_size;
702         u32 ct_kill_threshold; /* value in hw-dependent units */
703         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
704                                     /* for 1000, 6000 series and up */
705         u16 beacon_time_tsf_bits;
706         u32 calib_init_cfg;
707         u32 calib_rt_cfg;
708         const struct iwl_sensitivity_ranges *sens;
709 };
710
711
712 /******************************************************************************
713  *
714  * Functions implemented in core module which are forward declared here
715  * for use by iwl-[4-5].c
716  *
717  * NOTE:  The implementation of these functions are not hardware specific
718  * which is why they are in the core module files.
719  *
720  * Naming convention --
721  * iwl_         <-- Is part of iwlwifi
722  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
723  * iwl4965_bg_      <-- Called from work queue context
724  * iwl4965_mac_     <-- mac80211 callback
725  *
726  ****************************************************************************/
727 extern void iwl_update_chain_flags(struct iwl_priv *priv);
728 extern const u8 iwl_bcast_addr[ETH_ALEN];
729 extern int iwl_rxq_stop(struct iwl_priv *priv);
730 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
731 extern int iwl_queue_space(const struct iwl_queue *q);
732 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
733 {
734         return q->write_ptr >= q->read_ptr ?
735                 (i >= q->read_ptr && i < q->write_ptr) :
736                 !(i < q->read_ptr && i >= q->write_ptr);
737 }
738
739
740 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
741 {
742         /*
743          * This is for init calibration result and scan command which
744          * required buffer > TFD_MAX_PAYLOAD_SIZE,
745          * the big buffer at end of command array
746          */
747         if (is_huge)
748                 return q->n_window;     /* must be power of 2 */
749
750         /* Otherwise, use normal size buffers */
751         return index & (q->n_window - 1);
752 }
753
754
755 struct iwl_dma_ptr {
756         dma_addr_t dma;
757         void *addr;
758         size_t size;
759 };
760
761 #define IWL_OPERATION_MODE_AUTO     0
762 #define IWL_OPERATION_MODE_HT_ONLY  1
763 #define IWL_OPERATION_MODE_MIXED    2
764 #define IWL_OPERATION_MODE_20MHZ    3
765
766 #define IWL_TX_CRC_SIZE 4
767 #define IWL_TX_DELIMITER_SIZE 4
768
769 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
770
771 /* Sensitivity and chain noise calibration */
772 #define INITIALIZATION_VALUE            0xFFFF
773 #define IWL4965_CAL_NUM_BEACONS         20
774 #define IWL_CAL_NUM_BEACONS             16
775 #define MAXIMUM_ALLOWED_PATHLOSS        15
776
777 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
778
779 #define MAX_FA_OFDM  50
780 #define MIN_FA_OFDM  5
781 #define MAX_FA_CCK   50
782 #define MIN_FA_CCK   5
783
784 #define AUTO_CORR_STEP_OFDM       1
785
786 #define AUTO_CORR_STEP_CCK     3
787 #define AUTO_CORR_MAX_TH_CCK   160
788
789 #define NRG_DIFF               2
790 #define NRG_STEP_CCK           2
791 #define NRG_MARGIN             8
792 #define MAX_NUMBER_CCK_NO_FA 100
793
794 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
795
796 #define CHAIN_A             0
797 #define CHAIN_B             1
798 #define CHAIN_C             2
799 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
800 #define ALL_BAND_FILTER                 0xFF00
801 #define IN_BAND_FILTER                  0xFF
802 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
803
804 #define NRG_NUM_PREV_STAT_L     20
805 #define NUM_RX_CHAINS           3
806
807 enum iwl4965_false_alarm_state {
808         IWL_FA_TOO_MANY = 0,
809         IWL_FA_TOO_FEW = 1,
810         IWL_FA_GOOD_RANGE = 2,
811 };
812
813 enum iwl4965_chain_noise_state {
814         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
815         IWL_CHAIN_NOISE_ACCUMULATE,
816         IWL_CHAIN_NOISE_CALIBRATED,
817         IWL_CHAIN_NOISE_DONE,
818 };
819
820 enum iwl4965_calib_enabled_state {
821         IWL_CALIB_DISABLED = 0,  /* must be 0 */
822         IWL_CALIB_ENABLED = 1,
823 };
824
825
826 /*
827  * enum iwl_calib
828  * defines the order in which results of initial calibrations
829  * should be sent to the runtime uCode
830  */
831 enum iwl_calib {
832         IWL_CALIB_XTAL,
833         IWL_CALIB_DC,
834         IWL_CALIB_LO,
835         IWL_CALIB_TX_IQ,
836         IWL_CALIB_TX_IQ_PERD,
837         IWL_CALIB_BASE_BAND,
838         IWL_CALIB_TEMP_OFFSET,
839         IWL_CALIB_MAX
840 };
841
842 /* Opaque calibration results */
843 struct iwl_calib_result {
844         void *buf;
845         size_t buf_len;
846 };
847
848 enum ucode_type {
849         UCODE_NONE = 0,
850         UCODE_INIT,
851         UCODE_RT
852 };
853
854 /* Sensitivity calib data */
855 struct iwl_sensitivity_data {
856         u32 auto_corr_ofdm;
857         u32 auto_corr_ofdm_mrc;
858         u32 auto_corr_ofdm_x1;
859         u32 auto_corr_ofdm_mrc_x1;
860         u32 auto_corr_cck;
861         u32 auto_corr_cck_mrc;
862
863         u32 last_bad_plcp_cnt_ofdm;
864         u32 last_fa_cnt_ofdm;
865         u32 last_bad_plcp_cnt_cck;
866         u32 last_fa_cnt_cck;
867
868         u32 nrg_curr_state;
869         u32 nrg_prev_state;
870         u32 nrg_value[10];
871         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
872         u32 nrg_silence_ref;
873         u32 nrg_energy_idx;
874         u32 nrg_silence_idx;
875         u32 nrg_th_cck;
876         s32 nrg_auto_corr_silence_diff;
877         u32 num_in_cck_no_fa;
878         u32 nrg_th_ofdm;
879
880         u16 barker_corr_th_min;
881         u16 barker_corr_th_min_mrc;
882         u16 nrg_th_cca;
883 };
884
885 /* Chain noise (differential Rx gain) calib data */
886 struct iwl_chain_noise_data {
887         u32 active_chains;
888         u32 chain_noise_a;
889         u32 chain_noise_b;
890         u32 chain_noise_c;
891         u32 chain_signal_a;
892         u32 chain_signal_b;
893         u32 chain_signal_c;
894         u16 beacon_count;
895         u8 disconn_array[NUM_RX_CHAINS];
896         u8 delta_gain_code[NUM_RX_CHAINS];
897         u8 radio_write;
898         u8 state;
899 };
900
901 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
902 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
903
904 #define IWL_TRAFFIC_ENTRIES     (256)
905 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
906
907 enum {
908         MEASUREMENT_READY = (1 << 0),
909         MEASUREMENT_ACTIVE = (1 << 1),
910 };
911
912 enum iwl_nvm_type {
913         NVM_DEVICE_TYPE_EEPROM = 0,
914         NVM_DEVICE_TYPE_OTP,
915 };
916
917 /*
918  * Two types of OTP memory access modes
919  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
920  *                              based on physical memory addressing
921  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
922  *                             based on logical memory addressing
923  */
924 enum iwl_access_mode {
925         IWL_OTP_ACCESS_ABSOLUTE,
926         IWL_OTP_ACCESS_RELATIVE,
927 };
928
929 /**
930  * enum iwl_pa_type - Power Amplifier type
931  * @IWL_PA_SYSTEM:  based on uCode configuration
932  * @IWL_PA_INTERNAL: use Internal only
933  */
934 enum iwl_pa_type {
935         IWL_PA_SYSTEM = 0,
936         IWL_PA_INTERNAL = 1,
937 };
938
939 /* interrupt statistics */
940 struct isr_statistics {
941         u32 hw;
942         u32 sw;
943         u32 err_code;
944         u32 sch;
945         u32 alive;
946         u32 rfkill;
947         u32 ctkill;
948         u32 wakeup;
949         u32 rx;
950         u32 rx_handlers[REPLY_MAX];
951         u32 tx;
952         u32 unhandled;
953 };
954
955 /* reply_tx_statistics (for _agn devices) */
956 struct reply_tx_error_statistics {
957         u32 pp_delay;
958         u32 pp_few_bytes;
959         u32 pp_bt_prio;
960         u32 pp_quiet_period;
961         u32 pp_calc_ttak;
962         u32 int_crossed_retry;
963         u32 short_limit;
964         u32 long_limit;
965         u32 fifo_underrun;
966         u32 drain_flow;
967         u32 rfkill_flush;
968         u32 life_expire;
969         u32 dest_ps;
970         u32 host_abort;
971         u32 bt_retry;
972         u32 sta_invalid;
973         u32 frag_drop;
974         u32 tid_disable;
975         u32 fifo_flush;
976         u32 insuff_cf_poll;
977         u32 fail_hw_drop;
978         u32 sta_color_mismatch;
979         u32 unknown;
980 };
981
982 /* reply_agg_tx_statistics (for _agn devices) */
983 struct reply_agg_tx_error_statistics {
984         u32 underrun;
985         u32 bt_prio;
986         u32 few_bytes;
987         u32 abort;
988         u32 last_sent_ttl;
989         u32 last_sent_try;
990         u32 last_sent_bt_kill;
991         u32 scd_query;
992         u32 bad_crc32;
993         u32 response;
994         u32 dump_tx;
995         u32 delay_tx;
996         u32 unknown;
997 };
998
999 #ifdef CONFIG_IWLWIFI_DEBUGFS
1000 /* management statistics */
1001 enum iwl_mgmt_stats {
1002         MANAGEMENT_ASSOC_REQ = 0,
1003         MANAGEMENT_ASSOC_RESP,
1004         MANAGEMENT_REASSOC_REQ,
1005         MANAGEMENT_REASSOC_RESP,
1006         MANAGEMENT_PROBE_REQ,
1007         MANAGEMENT_PROBE_RESP,
1008         MANAGEMENT_BEACON,
1009         MANAGEMENT_ATIM,
1010         MANAGEMENT_DISASSOC,
1011         MANAGEMENT_AUTH,
1012         MANAGEMENT_DEAUTH,
1013         MANAGEMENT_ACTION,
1014         MANAGEMENT_MAX,
1015 };
1016 /* control statistics */
1017 enum iwl_ctrl_stats {
1018         CONTROL_BACK_REQ =  0,
1019         CONTROL_BACK,
1020         CONTROL_PSPOLL,
1021         CONTROL_RTS,
1022         CONTROL_CTS,
1023         CONTROL_ACK,
1024         CONTROL_CFEND,
1025         CONTROL_CFENDACK,
1026         CONTROL_MAX,
1027 };
1028
1029 struct traffic_stats {
1030         u32 mgmt[MANAGEMENT_MAX];
1031         u32 ctrl[CONTROL_MAX];
1032         u32 data_cnt;
1033         u64 data_bytes;
1034 };
1035 #else
1036 struct traffic_stats {
1037         u64 data_bytes;
1038 };
1039 #endif
1040
1041 /*
1042  * iwl_switch_rxon: "channel switch" structure
1043  *
1044  * @ switch_in_progress: channel switch in progress
1045  * @ channel: new channel
1046  */
1047 struct iwl_switch_rxon {
1048         bool switch_in_progress;
1049         __le16 channel;
1050 };
1051
1052 /*
1053  * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
1054  * to perform continuous uCode event logging operation if enabled
1055  */
1056 #define UCODE_TRACE_PERIOD (100)
1057
1058 /*
1059  * iwl_event_log: current uCode event log position
1060  *
1061  * @ucode_trace: enable/disable ucode continuous trace timer
1062  * @num_wraps: how many times the event buffer wraps
1063  * @next_entry:  the entry just before the next one that uCode would fill
1064  * @non_wraps_count: counter for no wrap detected when dump ucode events
1065  * @wraps_once_count: counter for wrap once detected when dump ucode events
1066  * @wraps_more_count: counter for wrap more than once detected
1067  *                    when dump ucode events
1068  */
1069 struct iwl_event_log {
1070         bool ucode_trace;
1071         u32 num_wraps;
1072         u32 next_entry;
1073         int non_wraps_count;
1074         int wraps_once_count;
1075         int wraps_more_count;
1076 };
1077
1078 /*
1079  * host interrupt timeout value
1080  * used with setting interrupt coalescing timer
1081  * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
1082  *
1083  * default interrupt coalescing timer is 64 x 32 = 2048 usecs
1084  * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
1085  */
1086 #define IWL_HOST_INT_TIMEOUT_MAX        (0xFF)
1087 #define IWL_HOST_INT_TIMEOUT_DEF        (0x40)
1088 #define IWL_HOST_INT_TIMEOUT_MIN        (0x0)
1089 #define IWL_HOST_INT_CALIB_TIMEOUT_MAX  (0xFF)
1090 #define IWL_HOST_INT_CALIB_TIMEOUT_DEF  (0x10)
1091 #define IWL_HOST_INT_CALIB_TIMEOUT_MIN  (0x0)
1092
1093 /*
1094  * This is the threshold value of plcp error rate per 100mSecs.  It is
1095  * used to set and check for the validity of plcp_delta.
1096  */
1097 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN  (1)
1098 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF  (50)
1099 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF     (100)
1100 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200)
1101 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX  (255)
1102 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE      (0)
1103
1104 #define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
1105 #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
1106
1107 /* timer constants use to monitor and recover stuck tx queues in mSecs */
1108 #define IWL_DEF_MONITORING_PERIOD       (1000)
1109 #define IWL_LONG_MONITORING_PERIOD      (5000)
1110 #define IWL_ONE_HUNDRED_MSECS   (100)
1111 #define IWL_MAX_MONITORING_PERIOD       (60000)
1112
1113 /* BT Antenna Coupling Threshold (dB) */
1114 #define IWL_BT_ANTENNA_COUPLING_THRESHOLD       (35)
1115
1116 enum iwl_reset {
1117         IWL_RF_RESET = 0,
1118         IWL_FW_RESET,
1119         IWL_MAX_FORCE_RESET,
1120 };
1121
1122 struct iwl_force_reset {
1123         int reset_request_count;
1124         int reset_success_count;
1125         int reset_reject_count;
1126         unsigned long reset_duration;
1127         unsigned long last_force_reset_jiffies;
1128 };
1129
1130 /* extend beacon time format bit shifting  */
1131 /*
1132  * for _3945 devices
1133  * bits 31:24 - extended
1134  * bits 23:0  - interval
1135  */
1136 #define IWL3945_EXT_BEACON_TIME_POS     24
1137 /*
1138  * for _agn devices
1139  * bits 31:22 - extended
1140  * bits 21:0  - interval
1141  */
1142 #define IWLAGN_EXT_BEACON_TIME_POS      22
1143
1144 enum iwl_rxon_context_id {
1145         IWL_RXON_CTX_BSS,
1146         IWL_RXON_CTX_PAN,
1147
1148         NUM_IWL_RXON_CTX
1149 };
1150
1151 struct iwl_rxon_context {
1152         struct ieee80211_vif *vif;
1153
1154         const u8 *ac_to_fifo;
1155         const u8 *ac_to_queue;
1156         u8 mcast_queue;
1157
1158         /*
1159          * We could use the vif to indicate active, but we
1160          * also need it to be active during disabling when
1161          * we already removed the vif for type setting.
1162          */
1163         bool always_active, is_active;
1164
1165         enum iwl_rxon_context_id ctxid;
1166
1167         u32 interface_modes, exclusive_interface_modes;
1168         u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
1169
1170         /*
1171          * We declare this const so it can only be
1172          * changed via explicit cast within the
1173          * routines that actually update the physical
1174          * hardware.
1175          */
1176         const struct iwl_rxon_cmd active;
1177         struct iwl_rxon_cmd staging;
1178
1179         struct iwl_rxon_time_cmd timing;
1180
1181         struct iwl_qos_info qos_data;
1182
1183         u8 bcast_sta_id, ap_sta_id;
1184
1185         u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
1186         u8 qos_cmd;
1187         u8 wep_key_cmd;
1188
1189         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1190         u8 key_mapping_keys;
1191
1192         __le32 station_flags;
1193
1194         struct {
1195                 bool non_gf_sta_present;
1196                 u8 protection;
1197                 bool enabled, is_40mhz;
1198                 u8 extension_chan_offset;
1199         } ht;
1200 };
1201
1202 struct iwl_priv {
1203
1204         /* ieee device used by generic ieee processing code */
1205         struct ieee80211_hw *hw;
1206         struct ieee80211_channel *ieee_channels;
1207         struct ieee80211_rate *ieee_rates;
1208         struct iwl_cfg *cfg;
1209
1210         /* temporary frame storage list */
1211         struct list_head free_frames;
1212         int frames_count;
1213
1214         enum ieee80211_band band;
1215         int alloc_rxb_page;
1216
1217         void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
1218                                        struct iwl_rx_mem_buffer *rxb);
1219
1220         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1221
1222         /* spectrum measurement report caching */
1223         struct iwl_spectrum_notification measure_report;
1224         u8 measurement_status;
1225
1226         /* ucode beacon time */
1227         u32 ucode_beacon_time;
1228         int missed_beacon_threshold;
1229
1230         /* track IBSS manager (last beacon) status */
1231         u32 ibss_manager;
1232
1233         /* storing the jiffies when the plcp error rate is received */
1234         unsigned long plcp_jiffies;
1235
1236         /* force reset */
1237         struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
1238
1239         /* we allocate array of iwl_channel_info for NIC's valid channels.
1240          *    Access via channel # using indirect index array */
1241         struct iwl_channel_info *channel_info;  /* channel info array */
1242         u8 channel_count;       /* # of channels */
1243
1244         /* thermal calibration */
1245         s32 temperature;        /* degrees Kelvin */
1246         s32 last_temperature;
1247
1248         /* init calibration results */
1249         struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1250
1251         /* Scan related variables */
1252         unsigned long scan_start;
1253         unsigned long scan_start_tsf;
1254         void *scan_cmd;
1255         enum ieee80211_band scan_band;
1256         struct cfg80211_scan_request *scan_request;
1257         struct ieee80211_vif *scan_vif;
1258         bool is_internal_short_scan;
1259         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1260         u8 mgmt_tx_ant;
1261
1262         /* spinlock */
1263         spinlock_t lock;        /* protect general shared data */
1264         spinlock_t hcmd_lock;   /* protect hcmd */
1265         spinlock_t reg_lock;    /* protect hw register access */
1266         struct mutex mutex;
1267         struct mutex sync_cmd_mutex; /* enable serialization of sync commands */
1268
1269         /* basic pci-network driver stuff */
1270         struct pci_dev *pci_dev;
1271
1272         /* pci hardware address support */
1273         void __iomem *hw_base;
1274         u32  hw_rev;
1275         u32  hw_wa_rev;
1276         u8   rev_id;
1277
1278         /* microcode/device supports multiple contexts */
1279         u8 valid_contexts;
1280
1281         /* command queue number */
1282         u8 cmd_queue;
1283
1284         /* max number of station keys */
1285         u8 sta_key_max_num;
1286
1287         /* EEPROM MAC addresses */
1288         struct mac_address addresses[2];
1289
1290         /* uCode images, save to reload in case of failure */
1291         int fw_index;                   /* firmware we're trying to load */
1292         u32 ucode_ver;                  /* version of ucode, copy of
1293                                            iwl_ucode.ver */
1294         struct fw_desc ucode_code;      /* runtime inst */
1295         struct fw_desc ucode_data;      /* runtime data original */
1296         struct fw_desc ucode_data_backup;       /* runtime data save/restore */
1297         struct fw_desc ucode_init;      /* initialization inst */
1298         struct fw_desc ucode_init_data; /* initialization data */
1299         struct fw_desc ucode_boot;      /* bootstrap inst */
1300         enum ucode_type ucode_type;
1301         u8 ucode_write_complete;        /* the image write is complete */
1302         char firmware_name[25];
1303
1304         struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
1305
1306         struct iwl_switch_rxon switch_rxon;
1307
1308         /* 1st responses from initialize and runtime uCode images.
1309          * _agn's initialize alive response contains some calibration data. */
1310         struct iwl_init_alive_resp card_alive_init;
1311         struct iwl_alive_resp card_alive;
1312
1313         unsigned long last_blink_time;
1314         u8 last_blink_rate;
1315         u8 allow_blinking;
1316         u64 led_tpt;
1317
1318         u16 active_rate;
1319
1320         u8 start_calib;
1321         struct iwl_sensitivity_data sensitivity_data;
1322         struct iwl_chain_noise_data chain_noise_data;
1323         bool enhance_sensitivity_table;
1324         __le16 sensitivity_tbl[HD_TABLE_SIZE];
1325         __le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES];
1326
1327         struct iwl_ht_config current_ht_config;
1328
1329         /* Rate scaling data */
1330         u8 retry_rate;
1331
1332         wait_queue_head_t wait_command_queue;
1333
1334         int activity_timer_active;
1335
1336         /* Rx and Tx DMA processing queues */
1337         struct iwl_rx_queue rxq;
1338         struct iwl_tx_queue *txq;
1339         unsigned long txq_ctx_active_msk;
1340         struct iwl_dma_ptr  kw; /* keep warm address */
1341         struct iwl_dma_ptr  scd_bc_tbls;
1342
1343         u32 scd_base_addr;      /* scheduler sram base address */
1344
1345         unsigned long status;
1346
1347         /* counts mgmt, ctl, and data packets */
1348         struct traffic_stats tx_stats;
1349         struct traffic_stats rx_stats;
1350
1351         /* counts interrupts */
1352         struct isr_statistics isr_stats;
1353
1354         struct iwl_power_mgr power_data;
1355         struct iwl_tt_mgmt thermal_throttle;
1356
1357         /* context information */
1358         u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
1359
1360         /* station table variables */
1361
1362         /* Note: if lock and sta_lock are needed, lock must be acquired first */
1363         spinlock_t sta_lock;
1364         int num_stations;
1365         struct iwl_station_entry stations[IWL_STATION_COUNT];
1366         unsigned long ucode_key_table;
1367
1368         /* queue refcounts */
1369 #define IWL_MAX_HW_QUEUES       32
1370         unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1371         /* for each AC */
1372         atomic_t queue_stop_count[4];
1373
1374         /* Indication if ieee80211_ops->open has been called */
1375         u8 is_open;
1376
1377         u8 mac80211_registered;
1378
1379         /* eeprom -- this is in the card's little endian byte order */
1380         u8 *eeprom;
1381         int    nvm_device_type;
1382         struct iwl_eeprom_calib_info *calib_info;
1383
1384         enum nl80211_iftype iw_mode;
1385
1386         /* Last Rx'd beacon timestamp */
1387         u64 timestamp;
1388
1389         union {
1390 #if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
1391                 struct {
1392                         void *shared_virt;
1393                         dma_addr_t shared_phys;
1394
1395                         struct delayed_work thermal_periodic;
1396                         struct delayed_work rfkill_poll;
1397
1398                         struct iwl3945_notif_statistics statistics;
1399 #ifdef CONFIG_IWLWIFI_DEBUGFS
1400                         struct iwl3945_notif_statistics accum_statistics;
1401                         struct iwl3945_notif_statistics delta_statistics;
1402                         struct iwl3945_notif_statistics max_delta;
1403 #endif
1404
1405                         u32 sta_supp_rates;
1406                         int last_rx_rssi;       /* From Rx packet statistics */
1407
1408                         /* Rx'd packet timing information */
1409                         u32 last_beacon_time;
1410                         u64 last_tsf;
1411
1412                         /*
1413                          * each calibration channel group in the
1414                          * EEPROM has a derived clip setting for
1415                          * each rate.
1416                          */
1417                         const struct iwl3945_clip_group clip_groups[5];
1418
1419                 } _3945;
1420 #endif
1421 #if defined(CONFIG_IWLAGN) || defined(CONFIG_IWLAGN_MODULE)
1422                 struct {
1423                         /* INT ICT Table */
1424                         __le32 *ict_tbl;
1425                         void *ict_tbl_vir;
1426                         dma_addr_t ict_tbl_dma;
1427                         dma_addr_t aligned_ict_tbl_dma;
1428                         int ict_index;
1429                         u32 inta;
1430                         bool use_ict;
1431                         /*
1432                          * reporting the number of tids has AGG on. 0 means
1433                          * no AGGREGATION
1434                          */
1435                         u8 agg_tids_count;
1436
1437                         struct iwl_rx_phy_res last_phy_res;
1438                         bool last_phy_res_valid;
1439
1440                         struct completion firmware_loading_complete;
1441
1442                         u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
1443                         u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
1444
1445                         /*
1446                          * chain noise reset and gain commands are the
1447                          * two extra calibration commands follows the standard
1448                          * phy calibration commands
1449                          */
1450                         u8 phy_calib_chain_noise_reset_cmd;
1451                         u8 phy_calib_chain_noise_gain_cmd;
1452
1453                         struct iwl_notif_statistics statistics;
1454                         struct iwl_bt_notif_statistics statistics_bt;
1455                         /* counts reply_tx error */
1456                         struct reply_tx_error_statistics reply_tx_stats;
1457                         struct reply_agg_tx_error_statistics reply_agg_tx_stats;
1458 #ifdef CONFIG_IWLWIFI_DEBUGFS
1459                         struct iwl_notif_statistics accum_statistics;
1460                         struct iwl_notif_statistics delta_statistics;
1461                         struct iwl_notif_statistics max_delta;
1462                         struct iwl_bt_notif_statistics accum_statistics_bt;
1463                         struct iwl_bt_notif_statistics delta_statistics_bt;
1464                         struct iwl_bt_notif_statistics max_delta_bt;
1465 #endif
1466                 } _agn;
1467 #endif
1468         };
1469
1470         /* bt coex */
1471         u8 bt_status;
1472         u8 bt_traffic_load, notif_bt_traffic_load;
1473         bool bt_ch_announce;
1474         bool bt_sco_active;
1475         bool bt_full_concurrent;
1476         bool bt_ant_couple_ok;
1477         __le32 kill_ack_mask;
1478         __le32 kill_cts_mask;
1479         __le16 bt_valid;
1480         u16 bt_on_thresh;
1481         u16 bt_duration;
1482         u16 dynamic_frag_thresh;
1483         u16 dynamic_agg_thresh;
1484         u8 bt_ci_compliance;
1485         struct work_struct bt_traffic_change_work;
1486
1487         struct iwl_hw_params hw_params;
1488
1489         u32 inta_mask;
1490
1491         struct workqueue_struct *workqueue;
1492
1493         struct work_struct restart;
1494         struct work_struct scan_completed;
1495         struct work_struct rx_replenish;
1496         struct work_struct abort_scan;
1497
1498         struct work_struct beacon_update;
1499         struct iwl_rxon_context *beacon_ctx;
1500         struct sk_buff *beacon_skb;
1501
1502         struct work_struct tt_work;
1503         struct work_struct ct_enter;
1504         struct work_struct ct_exit;
1505         struct work_struct start_internal_scan;
1506         struct work_struct tx_flush;
1507         struct work_struct bt_full_concurrency;
1508         struct work_struct bt_runtime_config;
1509
1510         struct tasklet_struct irq_tasklet;
1511
1512         struct delayed_work init_alive_start;
1513         struct delayed_work alive_start;
1514         struct delayed_work scan_check;
1515
1516         /* TX Power */
1517         s8 tx_power_user_lmt;
1518         s8 tx_power_device_lmt;
1519         s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
1520         s8 tx_power_next;
1521
1522
1523 #ifdef CONFIG_IWLWIFI_DEBUG
1524         /* debugging info */
1525         u32 debug_level; /* per device debugging will override global
1526                             iwl_debug_level if set */
1527 #endif /* CONFIG_IWLWIFI_DEBUG */
1528 #ifdef CONFIG_IWLWIFI_DEBUGFS
1529         /* debugfs */
1530         u16 tx_traffic_idx;
1531         u16 rx_traffic_idx;
1532         u8 *tx_traffic;
1533         u8 *rx_traffic;
1534         struct dentry *debugfs_dir;
1535         u32 dbgfs_sram_offset, dbgfs_sram_len;
1536         bool disable_ht40;
1537 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1538
1539         struct work_struct txpower_work;
1540         u32 disable_sens_cal;
1541         u32 disable_chain_noise_cal;
1542         u32 disable_tx_power_cal;
1543         struct work_struct run_time_calib_work;
1544         struct timer_list statistics_periodic;
1545         struct timer_list ucode_trace;
1546         struct timer_list monitor_recover;
1547         bool hw_ready;
1548
1549         struct iwl_event_log event_log;
1550 }; /*iwl_priv */
1551
1552 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1553 {
1554         set_bit(txq_id, &priv->txq_ctx_active_msk);
1555 }
1556
1557 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1558 {
1559         clear_bit(txq_id, &priv->txq_ctx_active_msk);
1560 }
1561
1562 #ifdef CONFIG_IWLWIFI_DEBUG
1563 /*
1564  * iwl_get_debug_level: Return active debug level for device
1565  *
1566  * Using sysfs it is possible to set per device debug level. This debug
1567  * level will be used if set, otherwise the global debug level which can be
1568  * set via module parameter is used.
1569  */
1570 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1571 {
1572         if (priv->debug_level)
1573                 return priv->debug_level;
1574         else
1575                 return iwl_debug_level;
1576 }
1577 #else
1578 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1579 {
1580         return iwl_debug_level;
1581 }
1582 #endif
1583
1584
1585 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1586                                                          int txq_id, int idx)
1587 {
1588         if (priv->txq[txq_id].txb[idx].skb)
1589                 return (struct ieee80211_hdr *)priv->txq[txq_id].
1590                                 txb[idx].skb->data;
1591         return NULL;
1592 }
1593
1594 static inline struct iwl_rxon_context *
1595 iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
1596 {
1597         struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
1598
1599         return vif_priv->ctx;
1600 }
1601
1602 #define for_each_context(priv, ctx)                             \
1603         for (ctx = &priv->contexts[IWL_RXON_CTX_BSS];           \
1604              ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++)    \
1605                 if (priv->valid_contexts & BIT(ctx->ctxid))
1606
1607 static inline int iwl_is_associated(struct iwl_priv *priv,
1608                                     enum iwl_rxon_context_id ctxid)
1609 {
1610         return (priv->contexts[ctxid].active.filter_flags &
1611                         RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1612 }
1613
1614 static inline int iwl_is_any_associated(struct iwl_priv *priv)
1615 {
1616         return iwl_is_associated(priv, IWL_RXON_CTX_BSS);
1617 }
1618
1619 static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
1620 {
1621         return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1622 }
1623
1624 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1625 {
1626         if (ch_info == NULL)
1627                 return 0;
1628         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1629 }
1630
1631 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1632 {
1633         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1634 }
1635
1636 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1637 {
1638         return ch_info->band == IEEE80211_BAND_5GHZ;
1639 }
1640
1641 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1642 {
1643         return ch_info->band == IEEE80211_BAND_2GHZ;
1644 }
1645
1646 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1647 {
1648         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1649 }
1650
1651 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1652 {
1653         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1654 }
1655
1656 static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page)
1657 {
1658         __free_pages(page, priv->hw_params.rx_page_order);
1659         priv->alloc_rxb_page--;
1660 }
1661
1662 static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page)
1663 {
1664         free_pages(page, priv->hw_params.rx_page_order);
1665         priv->alloc_rxb_page--;
1666 }
1667 #endif                          /* __iwl_dev_h__ */