iwl3945: Use iwl-eeprom.c routines
[pandora-kernel.git] / drivers / net / wireless / iwlwifi / iwl-3945-hw.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called LICENSE.GPL.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63 /*
64  * Please use this file (iwl-3945-hw.h) only for hardware-related definitions.
65  * Please use iwl-3945-commands.h for uCode API definitions.
66  * Please use iwl-3945.h for driver implementation definitions.
67  */
68
69 #ifndef __iwl_3945_hw__
70 #define __iwl_3945_hw__
71
72 #include "iwl-eeprom.h"
73
74 /*
75  * uCode queue management definitions ...
76  * Queue #4 is the command queue for 3945 and 4965.
77  */
78 #define IWL_CMD_QUEUE_NUM       4
79
80 /* Time constants */
81 #define SHORT_SLOT_TIME 9
82 #define LONG_SLOT_TIME 20
83
84 /* RSSI to dBm */
85 #define IWL39_RSSI_OFFSET       95
86
87 /*
88  * EEPROM related constants, enums, and structures.
89  */
90 #define EEPROM_SKU_CAP_OP_MODE_MRC                      (1 << 7)
91
92 /*
93  * Mapping of a Tx power level, at factory calibration temperature,
94  *   to a radio/DSP gain table index.
95  * One for each of 5 "sample" power levels in each band.
96  * v_det is measured at the factory, using the 3945's built-in power amplifier
97  *   (PA) output voltage detector.  This same detector is used during Tx of
98  *   long packets in normal operation to provide feedback as to proper output
99  *   level.
100  * Data copied from EEPROM.
101  * DO NOT ALTER THIS STRUCTURE!!!
102  */
103 struct iwl3945_eeprom_txpower_sample {
104         u8 gain_index;          /* index into power (gain) setup table ... */
105         s8 power;               /* ... for this pwr level for this chnl group */
106         u16 v_det;              /* PA output voltage */
107 } __attribute__ ((packed));
108
109 /*
110  * Mappings of Tx power levels -> nominal radio/DSP gain table indexes.
111  * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
112  * Tx power setup code interpolates between the 5 "sample" power levels
113  *    to determine the nominal setup for a requested power level.
114  * Data copied from EEPROM.
115  * DO NOT ALTER THIS STRUCTURE!!!
116  */
117 struct iwl3945_eeprom_txpower_group {
118         struct iwl3945_eeprom_txpower_sample samples[5];  /* 5 power levels */
119         s32 a, b, c, d, e;      /* coefficients for voltage->power
120                                  * formula (signed) */
121         s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on
122                                  * frequency (signed) */
123         s8 saturation_power;    /* highest power possible by h/w in this
124                                  * band */
125         u8 group_channel;       /* "representative" channel # in this band */
126         s16 temperature;        /* h/w temperature at factory calib this band
127                                  * (signed) */
128 } __attribute__ ((packed));
129
130 /*
131  * Temperature-based Tx-power compensation data, not band-specific.
132  * These coefficients are use to modify a/b/c/d/e coeffs based on
133  *   difference between current temperature and factory calib temperature.
134  * Data copied from EEPROM.
135  */
136 struct iwl3945_eeprom_temperature_corr {
137         u32 Ta;
138         u32 Tb;
139         u32 Tc;
140         u32 Td;
141         u32 Te;
142 } __attribute__ ((packed));
143
144 /*
145  * EEPROM map
146  */
147 struct iwl3945_eeprom {
148         u8 reserved0[16];
149         u16 device_id;  /* abs.ofs: 16 */
150         u8 reserved1[2];
151         u16 pmc;                /* abs.ofs: 20 */
152         u8 reserved2[20];
153         u8 mac_address[6];      /* abs.ofs: 42 */
154         u8 reserved3[58];
155         u16 board_revision;     /* abs.ofs: 106 */
156         u8 reserved4[11];
157         u8 board_pba_number[9]; /* abs.ofs: 119 */
158         u8 reserved5[8];
159         u16 version;            /* abs.ofs: 136 */
160         u8 sku_cap;             /* abs.ofs: 138 */
161         u8 leds_mode;           /* abs.ofs: 139 */
162         u16 oem_mode;
163         u16 wowlan_mode;        /* abs.ofs: 142 */
164         u16 leds_time_interval; /* abs.ofs: 144 */
165         u8 leds_off_time;       /* abs.ofs: 146 */
166         u8 leds_on_time;        /* abs.ofs: 147 */
167         u8 almgor_m_version;    /* abs.ofs: 148 */
168         u8 antenna_switch_type; /* abs.ofs: 149 */
169         u8 reserved6[42];
170         u8 sku_id[4];           /* abs.ofs: 192 */
171
172 /*
173  * Per-channel regulatory data.
174  *
175  * Each channel that *might* be supported by 3945 or 4965 has a fixed location
176  * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
177  * txpower (MSB).
178  *
179  * Entries immediately below are for 20 MHz channel width.  FAT (40 MHz)
180  * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
181  *
182  * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
183  */
184         u16 band_1_count;       /* abs.ofs: 196 */
185         struct iwl_eeprom_channel band_1_channels[14];  /* abs.ofs: 198 */
186
187 /*
188  * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
189  * 5.0 GHz channels 7, 8, 11, 12, 16
190  * (4915-5080MHz) (none of these is ever supported)
191  */
192         u16 band_2_count;       /* abs.ofs: 226 */
193         struct iwl_eeprom_channel band_2_channels[13];  /* abs.ofs: 228 */
194
195 /*
196  * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
197  * (5170-5320MHz)
198  */
199         u16 band_3_count;       /* abs.ofs: 254 */
200         struct iwl_eeprom_channel band_3_channels[12];  /* abs.ofs: 256 */
201
202 /*
203  * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
204  * (5500-5700MHz)
205  */
206         u16 band_4_count;       /* abs.ofs: 280 */
207         struct iwl_eeprom_channel band_4_channels[11];  /* abs.ofs: 282 */
208
209 /*
210  * 5.7 GHz channels 145, 149, 153, 157, 161, 165
211  * (5725-5825MHz)
212  */
213         u16 band_5_count;       /* abs.ofs: 304 */
214         struct iwl_eeprom_channel band_5_channels[6];  /* abs.ofs: 306 */
215
216         u8 reserved9[194];
217
218 /*
219  * 3945 Txpower calibration data.
220  */
221 #define IWL_NUM_TX_CALIB_GROUPS 5
222         struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS];
223 /* abs.ofs: 512 */
224         struct iwl3945_eeprom_temperature_corr corrections;  /* abs.ofs: 832 */
225         u8 reserved16[172];     /* fill out to full 1024 byte block */
226 } __attribute__ ((packed));
227
228 #define IWL3945_EEPROM_IMG_SIZE 1024
229
230 /* End of EEPROM */
231
232
233 #define PCI_LINK_CTRL      0x0F0
234 #define PCI_POWER_SOURCE   0x0C8
235 #define PCI_REG_WUM8       0x0E8
236 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT         (0x80000000)
237
238 #define PCI_CFG_REV_ID_BIT_BASIC_SKU                (0x40)      /* bit 6    */
239 #define PCI_CFG_REV_ID_BIT_RTP                      (0x80)      /* bit 7    */
240
241 #define TFD_QUEUE_MIN           0
242 #define TFD_QUEUE_MAX           6
243
244 #define IWL_NUM_SCAN_RATES         (2)
245
246 #define IWL_DEFAULT_TX_RETRY  15
247
248 /*********************************************/
249
250 #define RFD_SIZE                              4
251 #define NUM_TFD_CHUNKS                        4
252
253 #define RX_QUEUE_SIZE                         256
254 #define RX_QUEUE_MASK                         255
255 #define RX_QUEUE_SIZE_LOG                     8
256
257 #define U32_PAD(n)              ((4-(n))&0x3)
258
259 #define TFD_CTL_COUNT_SET(n)       (n << 24)
260 #define TFD_CTL_COUNT_GET(ctl)     ((ctl >> 24) & 7)
261 #define TFD_CTL_PAD_SET(n)         (n << 28)
262 #define TFD_CTL_PAD_GET(ctl)       (ctl >> 28)
263
264 /*
265  * RX related structures and functions
266  */
267 #define RX_FREE_BUFFERS 64
268 #define RX_LOW_WATERMARK 8
269
270 /* Sizes and addresses for instruction and data memory (SRAM) in
271  * 3945's embedded processor.  Driver access is via HBUS_TARG_MEM_* regs. */
272 #define IWL39_RTC_INST_LOWER_BOUND              (0x000000)
273 #define IWL39_RTC_INST_UPPER_BOUND              (0x014000)
274
275 #define IWL39_RTC_DATA_LOWER_BOUND              (0x800000)
276 #define IWL39_RTC_DATA_UPPER_BOUND              (0x808000)
277
278 #define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \
279                                 IWL39_RTC_INST_LOWER_BOUND)
280 #define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \
281                                 IWL39_RTC_DATA_LOWER_BOUND)
282
283 #define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE
284 #define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE
285
286 /* Size of uCode instruction memory in bootstrap state machine */
287 #define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE
288
289 #define IWL39_MAX_NUM_QUEUES    8
290
291 static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr)
292 {
293         return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
294                (addr < IWL39_RTC_DATA_UPPER_BOUND);
295 }
296
297 /* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE
298  * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */
299 struct iwl3945_shared {
300         __le32 tx_base_ptr[8];
301 } __attribute__ ((packed));
302
303 static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags)
304 {
305         return le16_to_cpu(rate_n_flags) & 0xFF;
306 }
307
308 static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags)
309 {
310         return le16_to_cpu(rate_n_flags);
311 }
312
313 static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags)
314 {
315         return cpu_to_le16((u16)rate|flags);
316 }
317 #endif