Merge git://git.infradead.org/battery-2.6
[pandora-kernel.git] / drivers / net / wireless / ath / ath9k / pci.c
1 /*
2  * Copyright (c) 2008-2009 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #include <linux/nl80211.h>
18 #include <linux/pci.h>
19 #include "ath9k.h"
20
21 static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
22         { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
23         { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
24         { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
25         { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
26         { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
27         { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
28         { PCI_VDEVICE(ATHEROS, 0x002C) }, /* PCI-E 802.11n bonded out */
29         { PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI   */
30         { PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
31         { PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E  AR9300 */
32         { 0 }
33 };
34
35 /* return bus cachesize in 4B word units */
36 static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
37 {
38         struct ath_softc *sc = (struct ath_softc *) common->priv;
39         u8 u8tmp;
40
41         pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
42         *csz = (int)u8tmp;
43
44         /*
45          * This check was put in to avoid "unplesant" consequences if
46          * the bootrom has not fully initialized all PCI devices.
47          * Sometimes the cache line size register is not set
48          */
49
50         if (*csz == 0)
51                 *csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
52 }
53
54 static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
55 {
56         struct ath_hw *ah = (struct ath_hw *) common->ah;
57
58         common->ops->read(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
59
60         if (!ath9k_hw_wait(ah,
61                            AR_EEPROM_STATUS_DATA,
62                            AR_EEPROM_STATUS_DATA_BUSY |
63                            AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
64                            AH_WAIT_TIMEOUT)) {
65                 return false;
66         }
67
68         *data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
69                    AR_EEPROM_STATUS_DATA_VAL);
70
71         return true;
72 }
73
74 /*
75  * Bluetooth coexistance requires disabling ASPM.
76  */
77 static void ath_pci_bt_coex_prep(struct ath_common *common)
78 {
79         struct ath_softc *sc = (struct ath_softc *) common->priv;
80         struct pci_dev *pdev = to_pci_dev(sc->dev);
81         u8 aspm;
82
83         if (!pdev->is_pcie)
84                 return;
85
86         pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
87         aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
88         pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
89 }
90
91 static const struct ath_bus_ops ath_pci_bus_ops = {
92         .ath_bus_type = ATH_PCI,
93         .read_cachesize = ath_pci_read_cachesize,
94         .eeprom_read = ath_pci_eeprom_read,
95         .bt_coex_prep = ath_pci_bt_coex_prep,
96 };
97
98 static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
99 {
100         void __iomem *mem;
101         struct ath_wiphy *aphy;
102         struct ath_softc *sc;
103         struct ieee80211_hw *hw;
104         u8 csz;
105         u16 subsysid;
106         u32 val;
107         int ret = 0;
108         char hw_name[64];
109
110         if (pci_enable_device(pdev))
111                 return -EIO;
112
113         ret =  pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
114         if (ret) {
115                 printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
116                 goto err_dma;
117         }
118
119         ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
120         if (ret) {
121                 printk(KERN_ERR "ath9k: 32-bit DMA consistent "
122                         "DMA enable failed\n");
123                 goto err_dma;
124         }
125
126         /*
127          * Cache line size is used to size and align various
128          * structures used to communicate with the hardware.
129          */
130         pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
131         if (csz == 0) {
132                 /*
133                  * Linux 2.4.18 (at least) writes the cache line size
134                  * register as a 16-bit wide register which is wrong.
135                  * We must have this setup properly for rx buffer
136                  * DMA to work so force a reasonable value here if it
137                  * comes up zero.
138                  */
139                 csz = L1_CACHE_BYTES / sizeof(u32);
140                 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
141         }
142         /*
143          * The default setting of latency timer yields poor results,
144          * set it to the value used by other systems. It may be worth
145          * tweaking this setting more.
146          */
147         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
148
149         pci_set_master(pdev);
150
151         /*
152          * Disable the RETRY_TIMEOUT register (0x41) to keep
153          * PCI Tx retries from interfering with C3 CPU state.
154          */
155         pci_read_config_dword(pdev, 0x40, &val);
156         if ((val & 0x0000ff00) != 0)
157                 pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
158
159         ret = pci_request_region(pdev, 0, "ath9k");
160         if (ret) {
161                 dev_err(&pdev->dev, "PCI memory region reserve error\n");
162                 ret = -ENODEV;
163                 goto err_region;
164         }
165
166         mem = pci_iomap(pdev, 0, 0);
167         if (!mem) {
168                 printk(KERN_ERR "PCI memory map error\n") ;
169                 ret = -EIO;
170                 goto err_iomap;
171         }
172
173         hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
174                                 sizeof(struct ath_softc), &ath9k_ops);
175         if (!hw) {
176                 dev_err(&pdev->dev, "No memory for ieee80211_hw\n");
177                 ret = -ENOMEM;
178                 goto err_alloc_hw;
179         }
180
181         SET_IEEE80211_DEV(hw, &pdev->dev);
182         pci_set_drvdata(pdev, hw);
183
184         aphy = hw->priv;
185         sc = (struct ath_softc *) (aphy + 1);
186         aphy->sc = sc;
187         aphy->hw = hw;
188         sc->pri_wiphy = aphy;
189         sc->hw = hw;
190         sc->dev = &pdev->dev;
191         sc->mem = mem;
192
193         /* Will be cleared in ath9k_start() */
194         sc->sc_flags |= SC_OP_INVALID;
195
196         ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
197         if (ret) {
198                 dev_err(&pdev->dev, "request_irq failed\n");
199                 goto err_irq;
200         }
201
202         sc->irq = pdev->irq;
203
204         pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
205         ret = ath9k_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
206         if (ret) {
207                 dev_err(&pdev->dev, "Failed to initialize device\n");
208                 goto err_init;
209         }
210
211         ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
212         printk(KERN_INFO
213                "%s: %s mem=0x%lx, irq=%d\n",
214                wiphy_name(hw->wiphy),
215                hw_name,
216                (unsigned long)mem, pdev->irq);
217
218         return 0;
219
220 err_init:
221         free_irq(sc->irq, sc);
222 err_irq:
223         ieee80211_free_hw(hw);
224 err_alloc_hw:
225         pci_iounmap(pdev, mem);
226 err_iomap:
227         pci_release_region(pdev, 0);
228 err_region:
229         /* Nothing */
230 err_dma:
231         pci_disable_device(pdev);
232         return ret;
233 }
234
235 static void ath_pci_remove(struct pci_dev *pdev)
236 {
237         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
238         struct ath_wiphy *aphy = hw->priv;
239         struct ath_softc *sc = aphy->sc;
240         void __iomem *mem = sc->mem;
241
242         ath9k_deinit_device(sc);
243         free_irq(sc->irq, sc);
244         ieee80211_free_hw(sc->hw);
245
246         pci_iounmap(pdev, mem);
247         pci_disable_device(pdev);
248         pci_release_region(pdev, 0);
249 }
250
251 #ifdef CONFIG_PM
252
253 static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
254 {
255         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
256         struct ath_wiphy *aphy = hw->priv;
257         struct ath_softc *sc = aphy->sc;
258
259         ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
260
261         pci_save_state(pdev);
262         pci_disable_device(pdev);
263         pci_set_power_state(pdev, PCI_D3hot);
264
265         return 0;
266 }
267
268 static int ath_pci_resume(struct pci_dev *pdev)
269 {
270         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
271         struct ath_wiphy *aphy = hw->priv;
272         struct ath_softc *sc = aphy->sc;
273         u32 val;
274         int err;
275
276         pci_restore_state(pdev);
277
278         err = pci_enable_device(pdev);
279         if (err)
280                 return err;
281
282         /*
283          * Suspend/Resume resets the PCI configuration space, so we have to
284          * re-disable the RETRY_TIMEOUT register (0x41) to keep
285          * PCI Tx retries from interfering with C3 CPU state
286          */
287         pci_read_config_dword(pdev, 0x40, &val);
288         if ((val & 0x0000ff00) != 0)
289                 pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
290
291         /* Enable LED */
292         ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
293                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
294         ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
295
296         return 0;
297 }
298
299 #endif /* CONFIG_PM */
300
301 MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
302
303 static struct pci_driver ath_pci_driver = {
304         .name       = "ath9k",
305         .id_table   = ath_pci_id_table,
306         .probe      = ath_pci_probe,
307         .remove     = ath_pci_remove,
308 #ifdef CONFIG_PM
309         .suspend    = ath_pci_suspend,
310         .resume     = ath_pci_resume,
311 #endif /* CONFIG_PM */
312 };
313
314 int ath_pci_init(void)
315 {
316         return pci_register_driver(&ath_pci_driver);
317 }
318
319 void ath_pci_exit(void)
320 {
321         pci_unregister_driver(&ath_pci_driver);
322 }