2 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/nl80211.h>
20 static char *dev_info = "ath9k";
22 MODULE_AUTHOR("Atheros Communications");
23 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
24 MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
25 MODULE_LICENSE("Dual BSD/GPL");
27 static int modparam_nohwcrypt;
28 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
29 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
31 /* We use the hw_value as an index into our private channel structure */
33 #define CHAN2G(_freq, _idx) { \
34 .center_freq = (_freq), \
39 #define CHAN5G(_freq, _idx) { \
40 .band = IEEE80211_BAND_5GHZ, \
41 .center_freq = (_freq), \
46 /* Some 2 GHz radios are actually tunable on 2312-2732
47 * on 5 MHz steps, we support the channels which we know
48 * we have calibration data for all cards though to make
50 static struct ieee80211_channel ath9k_2ghz_chantable[] = {
51 CHAN2G(2412, 0), /* Channel 1 */
52 CHAN2G(2417, 1), /* Channel 2 */
53 CHAN2G(2422, 2), /* Channel 3 */
54 CHAN2G(2427, 3), /* Channel 4 */
55 CHAN2G(2432, 4), /* Channel 5 */
56 CHAN2G(2437, 5), /* Channel 6 */
57 CHAN2G(2442, 6), /* Channel 7 */
58 CHAN2G(2447, 7), /* Channel 8 */
59 CHAN2G(2452, 8), /* Channel 9 */
60 CHAN2G(2457, 9), /* Channel 10 */
61 CHAN2G(2462, 10), /* Channel 11 */
62 CHAN2G(2467, 11), /* Channel 12 */
63 CHAN2G(2472, 12), /* Channel 13 */
64 CHAN2G(2484, 13), /* Channel 14 */
67 /* Some 5 GHz radios are actually tunable on XXXX-YYYY
68 * on 5 MHz steps, we support the channels which we know
69 * we have calibration data for all cards though to make
71 static struct ieee80211_channel ath9k_5ghz_chantable[] = {
72 /* _We_ call this UNII 1 */
73 CHAN5G(5180, 14), /* Channel 36 */
74 CHAN5G(5200, 15), /* Channel 40 */
75 CHAN5G(5220, 16), /* Channel 44 */
76 CHAN5G(5240, 17), /* Channel 48 */
77 /* _We_ call this UNII 2 */
78 CHAN5G(5260, 18), /* Channel 52 */
79 CHAN5G(5280, 19), /* Channel 56 */
80 CHAN5G(5300, 20), /* Channel 60 */
81 CHAN5G(5320, 21), /* Channel 64 */
82 /* _We_ call this "Middle band" */
83 CHAN5G(5500, 22), /* Channel 100 */
84 CHAN5G(5520, 23), /* Channel 104 */
85 CHAN5G(5540, 24), /* Channel 108 */
86 CHAN5G(5560, 25), /* Channel 112 */
87 CHAN5G(5580, 26), /* Channel 116 */
88 CHAN5G(5600, 27), /* Channel 120 */
89 CHAN5G(5620, 28), /* Channel 124 */
90 CHAN5G(5640, 29), /* Channel 128 */
91 CHAN5G(5660, 30), /* Channel 132 */
92 CHAN5G(5680, 31), /* Channel 136 */
93 CHAN5G(5700, 32), /* Channel 140 */
94 /* _We_ call this UNII 3 */
95 CHAN5G(5745, 33), /* Channel 149 */
96 CHAN5G(5765, 34), /* Channel 153 */
97 CHAN5G(5785, 35), /* Channel 157 */
98 CHAN5G(5805, 36), /* Channel 161 */
99 CHAN5G(5825, 37), /* Channel 165 */
102 static void ath_cache_conf_rate(struct ath_softc *sc,
103 struct ieee80211_conf *conf)
105 switch (conf->channel->band) {
106 case IEEE80211_BAND_2GHZ:
107 if (conf_is_ht20(conf))
109 sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
110 else if (conf_is_ht40_minus(conf))
112 sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
113 else if (conf_is_ht40_plus(conf))
115 sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
118 sc->hw_rate_table[ATH9K_MODE_11G];
120 case IEEE80211_BAND_5GHZ:
121 if (conf_is_ht20(conf))
123 sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
124 else if (conf_is_ht40_minus(conf))
126 sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
127 else if (conf_is_ht40_plus(conf))
129 sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
132 sc->hw_rate_table[ATH9K_MODE_11A];
140 static void ath_update_txpow(struct ath_softc *sc)
142 struct ath_hw *ah = sc->sc_ah;
145 if (sc->curtxpow != sc->config.txpowlimit) {
146 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
147 /* read back in case value is clamped */
148 ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
149 sc->curtxpow = txpow;
153 static u8 parse_mpdudensity(u8 mpdudensity)
156 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
157 * 0 for no restriction
166 switch (mpdudensity) {
172 /* Our lower layer calculations limit our precision to
188 static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
190 const struct ath_rate_table *rate_table = NULL;
191 struct ieee80211_supported_band *sband;
192 struct ieee80211_rate *rate;
196 case IEEE80211_BAND_2GHZ:
197 rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
199 case IEEE80211_BAND_5GHZ:
200 rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
206 if (rate_table == NULL)
209 sband = &sc->sbands[band];
210 rate = sc->rates[band];
212 if (rate_table->rate_cnt > ATH_RATE_MAX)
213 maxrates = ATH_RATE_MAX;
215 maxrates = rate_table->rate_cnt;
217 for (i = 0; i < maxrates; i++) {
218 rate[i].bitrate = rate_table->info[i].ratekbps / 100;
219 rate[i].hw_value = rate_table->info[i].ratecode;
220 if (rate_table->info[i].short_preamble) {
221 rate[i].hw_value_short = rate_table->info[i].ratecode |
222 rate_table->info[i].short_preamble;
223 rate[i].flags = IEEE80211_RATE_SHORT_PREAMBLE;
227 DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n",
228 rate[i].bitrate / 10, rate[i].hw_value);
232 static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
233 struct ieee80211_hw *hw)
235 struct ieee80211_channel *curchan = hw->conf.channel;
236 struct ath9k_channel *channel;
239 chan_idx = curchan->hw_value;
240 channel = &sc->sc_ah->channels[chan_idx];
241 ath9k_update_ichannel(sc, hw, channel);
246 * Set/change channels. If the channel is really being changed, it's done
247 * by reseting the chip. To accomplish this we must first cleanup any pending
248 * DMA, then restart stuff.
250 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
251 struct ath9k_channel *hchan)
253 struct ath_hw *ah = sc->sc_ah;
254 bool fastcc = true, stopped;
255 struct ieee80211_channel *channel = hw->conf.channel;
258 if (sc->sc_flags & SC_OP_INVALID)
264 * This is only performed if the channel settings have
267 * To switch channels clear any pending DMA operations;
268 * wait long enough for the RX fifo to drain, reset the
269 * hardware at the new frequency, and then re-enable
270 * the relevant bits of the h/w.
272 ath9k_hw_set_interrupts(ah, 0);
273 ath_drain_all_txq(sc, false);
274 stopped = ath_stoprecv(sc);
276 /* XXX: do not flush receive queue here. We don't want
277 * to flush data frames already in queue because of
278 * changing channel. */
280 if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
283 DPRINTF(sc, ATH_DBG_CONFIG,
284 "(%u MHz) -> (%u MHz), chanwidth: %d\n",
285 sc->sc_ah->curchan->channel,
286 channel->center_freq, sc->tx_chan_width);
288 spin_lock_bh(&sc->sc_resetlock);
290 r = ath9k_hw_reset(ah, hchan, fastcc);
292 DPRINTF(sc, ATH_DBG_FATAL,
293 "Unable to reset channel (%u Mhz) "
295 channel->center_freq, r);
296 spin_unlock_bh(&sc->sc_resetlock);
299 spin_unlock_bh(&sc->sc_resetlock);
301 sc->sc_flags &= ~SC_OP_FULL_RESET;
303 if (ath_startrecv(sc) != 0) {
304 DPRINTF(sc, ATH_DBG_FATAL,
305 "Unable to restart recv logic\n");
310 ath_cache_conf_rate(sc, &hw->conf);
311 ath_update_txpow(sc);
312 ath9k_hw_set_interrupts(ah, sc->imask);
315 ath9k_ps_restore(sc);
320 * This routine performs the periodic noise floor calibration function
321 * that is used to adjust and optimize the chip performance. This
322 * takes environmental changes (location, temperature) into account.
323 * When the task is complete, it reschedules itself depending on the
324 * appropriate interval that was calculated.
326 static void ath_ani_calibrate(unsigned long data)
328 struct ath_softc *sc = (struct ath_softc *)data;
329 struct ath_hw *ah = sc->sc_ah;
330 bool longcal = false;
331 bool shortcal = false;
332 bool aniflag = false;
333 unsigned int timestamp = jiffies_to_msecs(jiffies);
334 u32 cal_interval, short_cal_interval;
336 short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
337 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
340 * don't calibrate when we're scanning.
341 * we are most likely not on our home channel.
343 spin_lock(&sc->ani_lock);
344 if (sc->sc_flags & SC_OP_SCANNING)
347 /* Only calibrate if awake */
348 if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
353 /* Long calibration runs independently of short calibration. */
354 if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
356 DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
357 sc->ani.longcal_timer = timestamp;
360 /* Short calibration applies only while caldone is false */
361 if (!sc->ani.caldone) {
362 if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) {
364 DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies);
365 sc->ani.shortcal_timer = timestamp;
366 sc->ani.resetcal_timer = timestamp;
369 if ((timestamp - sc->ani.resetcal_timer) >=
370 ATH_RESTART_CALINTERVAL) {
371 sc->ani.caldone = ath9k_hw_reset_calvalid(ah);
373 sc->ani.resetcal_timer = timestamp;
377 /* Verify whether we must check ANI */
378 if ((timestamp - sc->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
380 sc->ani.checkani_timer = timestamp;
383 /* Skip all processing if there's nothing to do. */
384 if (longcal || shortcal || aniflag) {
385 /* Call ANI routine if necessary */
387 ath9k_hw_ani_monitor(ah, &sc->nodestats, ah->curchan);
389 /* Perform calibration if necessary */
390 if (longcal || shortcal) {
391 sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan,
392 sc->rx_chainmask, longcal);
395 sc->ani.noise_floor = ath9k_hw_getchan_noise(ah,
398 DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n",
399 ah->curchan->channel, ah->curchan->channelFlags,
400 sc->ani.noise_floor);
404 ath9k_ps_restore(sc);
407 spin_unlock(&sc->ani_lock);
409 * Set timer interval based on previous results.
410 * The interval must be the shortest necessary to satisfy ANI,
411 * short calibration and long calibration.
413 cal_interval = ATH_LONG_CALINTERVAL;
414 if (sc->sc_ah->config.enable_ani)
415 cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
416 if (!sc->ani.caldone)
417 cal_interval = min(cal_interval, (u32)short_cal_interval);
419 mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
422 static void ath_start_ani(struct ath_softc *sc)
424 unsigned long timestamp = jiffies_to_msecs(jiffies);
426 sc->ani.longcal_timer = timestamp;
427 sc->ani.shortcal_timer = timestamp;
428 sc->ani.checkani_timer = timestamp;
430 mod_timer(&sc->ani.timer,
431 jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
435 * Update tx/rx chainmask. For legacy association,
436 * hard code chainmask to 1x1, for 11n association, use
437 * the chainmask configuration, for bt coexistence, use
438 * the chainmask configuration even in legacy mode.
440 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
443 (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
444 sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
445 sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
447 sc->tx_chainmask = 1;
448 sc->rx_chainmask = 1;
451 DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n",
452 sc->tx_chainmask, sc->rx_chainmask);
455 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
459 an = (struct ath_node *)sta->drv_priv;
461 if (sc->sc_flags & SC_OP_TXAGGR) {
462 ath_tx_node_init(sc, an);
463 an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
464 sta->ht_cap.ampdu_factor);
465 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
466 an->last_rssi = ATH_RSSI_DUMMY_MARKER;
470 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
472 struct ath_node *an = (struct ath_node *)sta->drv_priv;
474 if (sc->sc_flags & SC_OP_TXAGGR)
475 ath_tx_node_cleanup(sc, an);
478 static void ath9k_tasklet(unsigned long data)
480 struct ath_softc *sc = (struct ath_softc *)data;
481 u32 status = sc->intrstatus;
485 if (status & ATH9K_INT_FATAL) {
486 ath_reset(sc, false);
487 ath9k_ps_restore(sc);
491 if (status & (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
492 spin_lock_bh(&sc->rx.rxflushlock);
493 ath_rx_tasklet(sc, 0);
494 spin_unlock_bh(&sc->rx.rxflushlock);
497 if (status & ATH9K_INT_TX)
500 if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
502 * TSF sync does not look correct; remain awake to sync with
505 DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n");
506 sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
509 /* re-enable hardware interrupt */
510 ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
511 ath9k_ps_restore(sc);
514 irqreturn_t ath_isr(int irq, void *dev)
516 #define SCHED_INTR ( \
526 struct ath_softc *sc = dev;
527 struct ath_hw *ah = sc->sc_ah;
528 enum ath9k_int status;
532 * The hardware is not ready/present, don't
533 * touch anything. Note this can happen early
534 * on if the IRQ is shared.
536 if (sc->sc_flags & SC_OP_INVALID)
540 /* shared irq, not for us */
542 if (!ath9k_hw_intrpend(ah))
546 * Figure out the reason(s) for the interrupt. Note
547 * that the hal returns a pseudo-ISR that may include
548 * bits we haven't explicitly enabled so we mask the
549 * value to insure we only process bits we requested.
551 ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
552 status &= sc->imask; /* discard unasked-for bits */
555 * If there are no status bits set, then this interrupt was not
556 * for me (should have been caught above).
561 /* Cache the status */
562 sc->intrstatus = status;
564 if (status & SCHED_INTR)
568 * If a FATAL or RXORN interrupt is received, we have to reset the
571 if (status & (ATH9K_INT_FATAL | ATH9K_INT_RXORN))
574 if (status & ATH9K_INT_SWBA)
575 tasklet_schedule(&sc->bcon_tasklet);
577 if (status & ATH9K_INT_TXURN)
578 ath9k_hw_updatetxtriglevel(ah, true);
580 if (status & ATH9K_INT_MIB) {
582 * Disable interrupts until we service the MIB
583 * interrupt; otherwise it will continue to
586 ath9k_hw_set_interrupts(ah, 0);
588 * Let the hal handle the event. We assume
589 * it will clear whatever condition caused
592 ath9k_hw_procmibevent(ah, &sc->nodestats);
593 ath9k_hw_set_interrupts(ah, sc->imask);
596 if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
597 if (status & ATH9K_INT_TIM_TIMER) {
598 /* Clear RxAbort bit so that we can
600 ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
601 ath9k_hw_setrxabort(sc->sc_ah, 0);
602 sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
607 ath_debug_stat_interrupt(sc, status);
610 /* turn off every interrupt except SWBA */
611 ath9k_hw_set_interrupts(ah, (sc->imask & ATH9K_INT_SWBA));
612 tasklet_schedule(&sc->intr_tq);
620 static u32 ath_get_extchanmode(struct ath_softc *sc,
621 struct ieee80211_channel *chan,
622 enum nl80211_channel_type channel_type)
626 switch (chan->band) {
627 case IEEE80211_BAND_2GHZ:
628 switch(channel_type) {
629 case NL80211_CHAN_NO_HT:
630 case NL80211_CHAN_HT20:
631 chanmode = CHANNEL_G_HT20;
633 case NL80211_CHAN_HT40PLUS:
634 chanmode = CHANNEL_G_HT40PLUS;
636 case NL80211_CHAN_HT40MINUS:
637 chanmode = CHANNEL_G_HT40MINUS;
641 case IEEE80211_BAND_5GHZ:
642 switch(channel_type) {
643 case NL80211_CHAN_NO_HT:
644 case NL80211_CHAN_HT20:
645 chanmode = CHANNEL_A_HT20;
647 case NL80211_CHAN_HT40PLUS:
648 chanmode = CHANNEL_A_HT40PLUS;
650 case NL80211_CHAN_HT40MINUS:
651 chanmode = CHANNEL_A_HT40MINUS;
662 static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
663 struct ath9k_keyval *hk, const u8 *addr,
669 key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
670 key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
674 * Group key installation - only two key cache entries are used
675 * regardless of splitmic capability since group key is only
676 * used either for TX or RX.
679 memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
680 memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_mic));
682 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
683 memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic));
685 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
688 /* TX and RX keys share the same key cache entry. */
689 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
690 memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
691 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
694 /* Separate key cache entries for TX and RX */
696 /* TX key goes at first index, RX key at +32. */
697 memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
698 if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
699 /* TX MIC entry failed. No need to proceed further */
700 DPRINTF(sc, ATH_DBG_FATAL,
701 "Setting TX MIC Key Failed\n");
705 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
706 /* XXX delete tx key on failure? */
707 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr);
710 static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
714 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
715 if (test_bit(i, sc->keymap) ||
716 test_bit(i + 64, sc->keymap))
717 continue; /* At least one part of TKIP key allocated */
719 (test_bit(i + 32, sc->keymap) ||
720 test_bit(i + 64 + 32, sc->keymap)))
721 continue; /* At least one part of TKIP key allocated */
723 /* Found a free slot for a TKIP key */
729 static int ath_reserve_key_cache_slot(struct ath_softc *sc)
733 /* First, try to find slots that would not be available for TKIP. */
735 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 4; i++) {
736 if (!test_bit(i, sc->keymap) &&
737 (test_bit(i + 32, sc->keymap) ||
738 test_bit(i + 64, sc->keymap) ||
739 test_bit(i + 64 + 32, sc->keymap)))
741 if (!test_bit(i + 32, sc->keymap) &&
742 (test_bit(i, sc->keymap) ||
743 test_bit(i + 64, sc->keymap) ||
744 test_bit(i + 64 + 32, sc->keymap)))
746 if (!test_bit(i + 64, sc->keymap) &&
747 (test_bit(i , sc->keymap) ||
748 test_bit(i + 32, sc->keymap) ||
749 test_bit(i + 64 + 32, sc->keymap)))
751 if (!test_bit(i + 64 + 32, sc->keymap) &&
752 (test_bit(i, sc->keymap) ||
753 test_bit(i + 32, sc->keymap) ||
754 test_bit(i + 64, sc->keymap)))
758 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
759 if (!test_bit(i, sc->keymap) &&
760 test_bit(i + 64, sc->keymap))
762 if (test_bit(i, sc->keymap) &&
763 !test_bit(i + 64, sc->keymap))
768 /* No partially used TKIP slots, pick any available slot */
769 for (i = IEEE80211_WEP_NKID; i < sc->keymax; i++) {
770 /* Do not allow slots that could be needed for TKIP group keys
771 * to be used. This limitation could be removed if we know that
772 * TKIP will not be used. */
773 if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
776 if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
778 if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
782 if (!test_bit(i, sc->keymap))
783 return i; /* Found a free slot for a key */
786 /* No free slot found */
790 static int ath_key_config(struct ath_softc *sc,
791 struct ieee80211_vif *vif,
792 struct ieee80211_sta *sta,
793 struct ieee80211_key_conf *key)
795 struct ath9k_keyval hk;
796 const u8 *mac = NULL;
800 memset(&hk, 0, sizeof(hk));
804 hk.kv_type = ATH9K_CIPHER_WEP;
807 hk.kv_type = ATH9K_CIPHER_TKIP;
810 hk.kv_type = ATH9K_CIPHER_AES_CCM;
816 hk.kv_len = key->keylen;
817 memcpy(hk.kv_val, key->key, key->keylen);
819 if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
820 /* For now, use the default keys for broadcast keys. This may
821 * need to change with virtual interfaces. */
823 } else if (key->keyidx) {
828 if (vif->type != NL80211_IFTYPE_AP) {
829 /* Only keyidx 0 should be used with unicast key, but
830 * allow this for client mode for now. */
839 if (key->alg == ALG_TKIP)
840 idx = ath_reserve_key_cache_slot_tkip(sc);
842 idx = ath_reserve_key_cache_slot(sc);
844 return -ENOSPC; /* no free key cache entries */
847 if (key->alg == ALG_TKIP)
848 ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac,
849 vif->type == NL80211_IFTYPE_AP);
851 ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac);
856 set_bit(idx, sc->keymap);
857 if (key->alg == ALG_TKIP) {
858 set_bit(idx + 64, sc->keymap);
860 set_bit(idx + 32, sc->keymap);
861 set_bit(idx + 64 + 32, sc->keymap);
868 static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
870 ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx);
871 if (key->hw_key_idx < IEEE80211_WEP_NKID)
874 clear_bit(key->hw_key_idx, sc->keymap);
875 if (key->alg != ALG_TKIP)
878 clear_bit(key->hw_key_idx + 64, sc->keymap);
880 clear_bit(key->hw_key_idx + 32, sc->keymap);
881 clear_bit(key->hw_key_idx + 64 + 32, sc->keymap);
885 static void setup_ht_cap(struct ath_softc *sc,
886 struct ieee80211_sta_ht_cap *ht_info)
888 u8 tx_streams, rx_streams;
890 ht_info->ht_supported = true;
891 ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
892 IEEE80211_HT_CAP_SM_PS |
893 IEEE80211_HT_CAP_SGI_40 |
894 IEEE80211_HT_CAP_DSSSCCK40;
896 ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
897 ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
899 /* set up supported mcs set */
900 memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
901 tx_streams = !(sc->tx_chainmask & (sc->tx_chainmask - 1)) ? 1 : 2;
902 rx_streams = !(sc->rx_chainmask & (sc->rx_chainmask - 1)) ? 1 : 2;
904 if (tx_streams != rx_streams) {
905 DPRINTF(sc, ATH_DBG_CONFIG, "TX streams %d, RX streams: %d\n",
906 tx_streams, rx_streams);
907 ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
908 ht_info->mcs.tx_params |= ((tx_streams - 1) <<
909 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
912 ht_info->mcs.rx_mask[0] = 0xff;
914 ht_info->mcs.rx_mask[1] = 0xff;
916 ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
919 static void ath9k_bss_assoc_info(struct ath_softc *sc,
920 struct ieee80211_vif *vif,
921 struct ieee80211_bss_conf *bss_conf)
924 if (bss_conf->assoc) {
925 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
926 bss_conf->aid, sc->curbssid);
928 /* New association, store aid */
929 sc->curaid = bss_conf->aid;
930 ath9k_hw_write_associd(sc);
933 * Request a re-configuration of Beacon related timers
934 * on the receipt of the first Beacon frame (i.e.,
935 * after time sync with the AP).
937 sc->sc_flags |= SC_OP_BEACON_SYNC;
939 /* Configure the beacon */
940 ath_beacon_config(sc, vif);
942 /* Reset rssi stats */
943 sc->nodestats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
944 sc->nodestats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
945 sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
946 sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
950 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
953 del_timer_sync(&sc->ani.timer);
957 /********************************/
959 /********************************/
961 static void ath_led_blink_work(struct work_struct *work)
963 struct ath_softc *sc = container_of(work, struct ath_softc,
964 ath_led_blink_work.work);
966 if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
969 if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
970 (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
971 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
973 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
974 (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
976 ieee80211_queue_delayed_work(sc->hw,
977 &sc->ath_led_blink_work,
978 (sc->sc_flags & SC_OP_LED_ON) ?
979 msecs_to_jiffies(sc->led_off_duration) :
980 msecs_to_jiffies(sc->led_on_duration));
982 sc->led_on_duration = sc->led_on_cnt ?
983 max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) :
984 ATH_LED_ON_DURATION_IDLE;
985 sc->led_off_duration = sc->led_off_cnt ?
986 max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) :
987 ATH_LED_OFF_DURATION_IDLE;
988 sc->led_on_cnt = sc->led_off_cnt = 0;
989 if (sc->sc_flags & SC_OP_LED_ON)
990 sc->sc_flags &= ~SC_OP_LED_ON;
992 sc->sc_flags |= SC_OP_LED_ON;
995 static void ath_led_brightness(struct led_classdev *led_cdev,
996 enum led_brightness brightness)
998 struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
999 struct ath_softc *sc = led->sc;
1001 switch (brightness) {
1003 if (led->led_type == ATH_LED_ASSOC ||
1004 led->led_type == ATH_LED_RADIO) {
1005 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
1006 (led->led_type == ATH_LED_RADIO));
1007 sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
1008 if (led->led_type == ATH_LED_RADIO)
1009 sc->sc_flags &= ~SC_OP_LED_ON;
1015 if (led->led_type == ATH_LED_ASSOC) {
1016 sc->sc_flags |= SC_OP_LED_ASSOCIATED;
1017 ieee80211_queue_delayed_work(sc->hw,
1018 &sc->ath_led_blink_work, 0);
1019 } else if (led->led_type == ATH_LED_RADIO) {
1020 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
1021 sc->sc_flags |= SC_OP_LED_ON;
1031 static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
1037 led->led_cdev.name = led->name;
1038 led->led_cdev.default_trigger = trigger;
1039 led->led_cdev.brightness_set = ath_led_brightness;
1041 ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
1043 DPRINTF(sc, ATH_DBG_FATAL,
1044 "Failed to register led:%s", led->name);
1046 led->registered = 1;
1050 static void ath_unregister_led(struct ath_led *led)
1052 if (led->registered) {
1053 led_classdev_unregister(&led->led_cdev);
1054 led->registered = 0;
1058 static void ath_deinit_leds(struct ath_softc *sc)
1060 ath_unregister_led(&sc->assoc_led);
1061 sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
1062 ath_unregister_led(&sc->tx_led);
1063 ath_unregister_led(&sc->rx_led);
1064 ath_unregister_led(&sc->radio_led);
1065 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1068 static void ath_init_leds(struct ath_softc *sc)
1073 /* Configure gpio 1 for output */
1074 ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
1075 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1076 /* LED off, active low */
1077 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1079 INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
1081 trigger = ieee80211_get_radio_led_name(sc->hw);
1082 snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
1083 "ath9k-%s::radio", wiphy_name(sc->hw->wiphy));
1084 ret = ath_register_led(sc, &sc->radio_led, trigger);
1085 sc->radio_led.led_type = ATH_LED_RADIO;
1089 trigger = ieee80211_get_assoc_led_name(sc->hw);
1090 snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
1091 "ath9k-%s::assoc", wiphy_name(sc->hw->wiphy));
1092 ret = ath_register_led(sc, &sc->assoc_led, trigger);
1093 sc->assoc_led.led_type = ATH_LED_ASSOC;
1097 trigger = ieee80211_get_tx_led_name(sc->hw);
1098 snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
1099 "ath9k-%s::tx", wiphy_name(sc->hw->wiphy));
1100 ret = ath_register_led(sc, &sc->tx_led, trigger);
1101 sc->tx_led.led_type = ATH_LED_TX;
1105 trigger = ieee80211_get_rx_led_name(sc->hw);
1106 snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
1107 "ath9k-%s::rx", wiphy_name(sc->hw->wiphy));
1108 ret = ath_register_led(sc, &sc->rx_led, trigger);
1109 sc->rx_led.led_type = ATH_LED_RX;
1116 cancel_delayed_work_sync(&sc->ath_led_blink_work);
1117 ath_deinit_leds(sc);
1120 void ath_radio_enable(struct ath_softc *sc)
1122 struct ath_hw *ah = sc->sc_ah;
1123 struct ieee80211_channel *channel = sc->hw->conf.channel;
1126 ath9k_ps_wakeup(sc);
1127 ath9k_hw_configpcipowersave(ah, 0);
1130 ah->curchan = ath_get_curchannel(sc, sc->hw);
1132 spin_lock_bh(&sc->sc_resetlock);
1133 r = ath9k_hw_reset(ah, ah->curchan, false);
1135 DPRINTF(sc, ATH_DBG_FATAL,
1136 "Unable to reset channel %u (%uMhz) ",
1137 "reset status %d\n",
1138 channel->center_freq, r);
1140 spin_unlock_bh(&sc->sc_resetlock);
1142 ath_update_txpow(sc);
1143 if (ath_startrecv(sc) != 0) {
1144 DPRINTF(sc, ATH_DBG_FATAL,
1145 "Unable to restart recv logic\n");
1149 if (sc->sc_flags & SC_OP_BEACONS)
1150 ath_beacon_config(sc, NULL); /* restart beacons */
1152 /* Re-Enable interrupts */
1153 ath9k_hw_set_interrupts(ah, sc->imask);
1156 ath9k_hw_cfg_output(ah, ATH_LED_PIN,
1157 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1158 ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0);
1160 ieee80211_wake_queues(sc->hw);
1161 ath9k_ps_restore(sc);
1164 void ath_radio_disable(struct ath_softc *sc)
1166 struct ath_hw *ah = sc->sc_ah;
1167 struct ieee80211_channel *channel = sc->hw->conf.channel;
1170 ath9k_ps_wakeup(sc);
1171 ieee80211_stop_queues(sc->hw);
1174 ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1);
1175 ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN);
1177 /* Disable interrupts */
1178 ath9k_hw_set_interrupts(ah, 0);
1180 ath_drain_all_txq(sc, false); /* clear pending tx frames */
1181 ath_stoprecv(sc); /* turn off frame recv */
1182 ath_flushrecv(sc); /* flush recv queue */
1185 ah->curchan = ath_get_curchannel(sc, sc->hw);
1187 spin_lock_bh(&sc->sc_resetlock);
1188 r = ath9k_hw_reset(ah, ah->curchan, false);
1190 DPRINTF(sc, ATH_DBG_FATAL,
1191 "Unable to reset channel %u (%uMhz) "
1192 "reset status %d\n",
1193 channel->center_freq, r);
1195 spin_unlock_bh(&sc->sc_resetlock);
1197 ath9k_hw_phy_disable(ah);
1198 ath9k_hw_configpcipowersave(ah, 1);
1199 ath9k_ps_restore(sc);
1200 ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
1203 /*******************/
1205 /*******************/
1207 static bool ath_is_rfkill_set(struct ath_softc *sc)
1209 struct ath_hw *ah = sc->sc_ah;
1211 return ath9k_hw_gpio_get(ah, ah->rfkill_gpio) ==
1212 ah->rfkill_polarity;
1215 static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
1217 struct ath_wiphy *aphy = hw->priv;
1218 struct ath_softc *sc = aphy->sc;
1219 bool blocked = !!ath_is_rfkill_set(sc);
1221 wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
1224 ath_radio_disable(sc);
1226 ath_radio_enable(sc);
1229 static void ath_start_rfkill_poll(struct ath_softc *sc)
1231 struct ath_hw *ah = sc->sc_ah;
1233 if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1234 wiphy_rfkill_start_polling(sc->hw->wiphy);
1237 void ath_cleanup(struct ath_softc *sc)
1240 free_irq(sc->irq, sc);
1241 ath_bus_cleanup(sc);
1242 kfree(sc->sec_wiphy);
1243 ieee80211_free_hw(sc->hw);
1246 void ath_detach(struct ath_softc *sc)
1248 struct ieee80211_hw *hw = sc->hw;
1251 ath9k_ps_wakeup(sc);
1253 DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
1255 ath_deinit_leds(sc);
1257 for (i = 0; i < sc->num_sec_wiphy; i++) {
1258 struct ath_wiphy *aphy = sc->sec_wiphy[i];
1261 sc->sec_wiphy[i] = NULL;
1262 ieee80211_unregister_hw(aphy->hw);
1263 ieee80211_free_hw(aphy->hw);
1265 ieee80211_unregister_hw(hw);
1269 tasklet_kill(&sc->intr_tq);
1270 tasklet_kill(&sc->bcon_tasklet);
1272 if (!(sc->sc_flags & SC_OP_INVALID))
1273 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
1275 /* cleanup tx queues */
1276 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1277 if (ATH_TXQ_SETUP(sc, i))
1278 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1280 ath9k_hw_detach(sc->sc_ah);
1282 ath9k_exit_debug(sc);
1285 static int ath9k_reg_notifier(struct wiphy *wiphy,
1286 struct regulatory_request *request)
1288 struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
1289 struct ath_wiphy *aphy = hw->priv;
1290 struct ath_softc *sc = aphy->sc;
1291 struct ath_regulatory *reg = &sc->sc_ah->regulatory;
1293 return ath_reg_notifier_apply(wiphy, request, reg);
1297 * Initialize and fill ath_softc, ath_sofct is the
1298 * "Software Carrier" struct. Historically it has existed
1299 * to allow the separation between hardware specific
1300 * variables (now in ath_hw) and driver specific variables.
1302 static int ath_init_softc(u16 devid, struct ath_softc *sc)
1304 struct ath_hw *ah = NULL;
1308 /* XXX: hardware will not be ready until ath_open() being called */
1309 sc->sc_flags |= SC_OP_INVALID;
1311 if (ath9k_init_debug(sc) < 0)
1312 printk(KERN_ERR "Unable to create debugfs files\n");
1314 spin_lock_init(&sc->wiphy_lock);
1315 spin_lock_init(&sc->sc_resetlock);
1316 spin_lock_init(&sc->sc_serial_rw);
1317 spin_lock_init(&sc->ani_lock);
1318 spin_lock_init(&sc->sc_pm_lock);
1319 mutex_init(&sc->mutex);
1320 tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
1321 tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
1325 * Cache line size is used to size and align various
1326 * structures used to communicate with the hardware.
1328 ath_read_cachesize(sc, &csz);
1329 /* XXX assert csz is non-zero */
1330 sc->cachelsz = csz << 2; /* convert to bytes */
1332 ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
1339 ah->hw_version.devid = devid;
1342 r = ath9k_hw_init(ah);
1344 DPRINTF(sc, ATH_DBG_FATAL,
1345 "Unable to initialize hardware; "
1346 "initialization status: %d\n", r);
1350 /* Get the hardware key cache size. */
1351 sc->keymax = ah->caps.keycache_size;
1352 if (sc->keymax > ATH_KEYMAX) {
1353 DPRINTF(sc, ATH_DBG_ANY,
1354 "Warning, using only %u entries in %u key cache\n",
1355 ATH_KEYMAX, sc->keymax);
1356 sc->keymax = ATH_KEYMAX;
1360 * Reset the key cache since some parts do not
1361 * reset the contents on initial power up.
1363 for (i = 0; i < sc->keymax; i++)
1364 ath9k_hw_keyreset(ah, (u16) i);
1366 /* default to MONITOR mode */
1367 sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
1369 /* Setup rate tables */
1371 ath_rate_attach(sc);
1372 ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
1373 ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
1376 * Allocate hardware transmit queues: one queue for
1377 * beacon frames and one data queue for each QoS
1378 * priority. Note that the hal handles reseting
1379 * these queues at the needed time.
1381 sc->beacon.beaconq = ath_beaconq_setup(ah);
1382 if (sc->beacon.beaconq == -1) {
1383 DPRINTF(sc, ATH_DBG_FATAL,
1384 "Unable to setup a beacon xmit queue\n");
1388 sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
1389 if (sc->beacon.cabq == NULL) {
1390 DPRINTF(sc, ATH_DBG_FATAL,
1391 "Unable to setup CAB xmit queue\n");
1396 sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
1397 ath_cabq_update(sc);
1399 for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
1400 sc->tx.hwq_map[i] = -1;
1402 /* Setup data queues */
1403 /* NB: ensure BK queue is the lowest priority h/w queue */
1404 if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
1405 DPRINTF(sc, ATH_DBG_FATAL,
1406 "Unable to setup xmit queue for BK traffic\n");
1411 if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
1412 DPRINTF(sc, ATH_DBG_FATAL,
1413 "Unable to setup xmit queue for BE traffic\n");
1417 if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
1418 DPRINTF(sc, ATH_DBG_FATAL,
1419 "Unable to setup xmit queue for VI traffic\n");
1423 if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
1424 DPRINTF(sc, ATH_DBG_FATAL,
1425 "Unable to setup xmit queue for VO traffic\n");
1430 /* Initializes the noise floor to a reasonable default value.
1431 * Later on this will be updated during ANI processing. */
1433 sc->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
1434 setup_timer(&sc->ani.timer, ath_ani_calibrate, (unsigned long)sc);
1436 if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1437 ATH9K_CIPHER_TKIP, NULL)) {
1439 * Whether we should enable h/w TKIP MIC.
1440 * XXX: if we don't support WME TKIP MIC, then we wouldn't
1441 * report WMM capable, so it's always safe to turn on
1442 * TKIP MIC in this case.
1444 ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
1449 * Check whether the separate key cache entries
1450 * are required to handle both tx+rx MIC keys.
1451 * With split mic keys the number of stations is limited
1452 * to 27 otherwise 59.
1454 if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1455 ATH9K_CIPHER_TKIP, NULL)
1456 && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1457 ATH9K_CIPHER_MIC, NULL)
1458 && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
1462 /* turn on mcast key search if possible */
1463 if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
1464 (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
1467 sc->config.txpowlimit = ATH_TXPOWER_MAX;
1469 /* 11n Capabilities */
1470 if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
1471 sc->sc_flags |= SC_OP_TXAGGR;
1472 sc->sc_flags |= SC_OP_RXAGGR;
1475 sc->tx_chainmask = ah->caps.tx_chainmask;
1476 sc->rx_chainmask = ah->caps.rx_chainmask;
1478 ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
1479 sc->rx.defant = ath9k_hw_getdefantenna(ah);
1481 if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
1482 memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
1484 sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
1486 /* initialize beacon slots */
1487 for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
1488 sc->beacon.bslot[i] = NULL;
1489 sc->beacon.bslot_aphy[i] = NULL;
1492 /* setup channels and rates */
1494 sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
1495 sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
1496 sc->rates[IEEE80211_BAND_2GHZ];
1497 sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
1498 sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
1499 ARRAY_SIZE(ath9k_2ghz_chantable);
1501 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
1502 sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
1503 sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
1504 sc->rates[IEEE80211_BAND_5GHZ];
1505 sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
1506 sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
1507 ARRAY_SIZE(ath9k_5ghz_chantable);
1510 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)
1511 ath9k_hw_btcoex_enable(sc->sc_ah);
1515 /* cleanup tx queues */
1516 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1517 if (ATH_TXQ_SETUP(sc, i))
1518 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1520 ath9k_hw_detach(ah);
1523 ath9k_exit_debug(sc);
1528 void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
1530 hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
1531 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1532 IEEE80211_HW_SIGNAL_DBM |
1533 IEEE80211_HW_AMPDU_AGGREGATION |
1534 IEEE80211_HW_SUPPORTS_PS |
1535 IEEE80211_HW_PS_NULLFUNC_STACK |
1536 IEEE80211_HW_SPECTRUM_MGMT;
1538 if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
1539 hw->flags |= IEEE80211_HW_MFP_CAPABLE;
1541 hw->wiphy->interface_modes =
1542 BIT(NL80211_IFTYPE_AP) |
1543 BIT(NL80211_IFTYPE_STATION) |
1544 BIT(NL80211_IFTYPE_ADHOC) |
1545 BIT(NL80211_IFTYPE_MESH_POINT);
1549 hw->channel_change_time = 5000;
1550 hw->max_listen_interval = 10;
1551 /* Hardware supports 10 but we use 4 */
1552 hw->max_rate_tries = 4;
1553 hw->sta_data_size = sizeof(struct ath_node);
1554 hw->vif_data_size = sizeof(struct ath_vif);
1556 hw->rate_control_algorithm = "ath9k_rate_control";
1558 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
1559 &sc->sbands[IEEE80211_BAND_2GHZ];
1560 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
1561 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
1562 &sc->sbands[IEEE80211_BAND_5GHZ];
1565 /* Device driver core initialization */
1566 int ath_init_device(u16 devid, struct ath_softc *sc)
1568 struct ieee80211_hw *hw = sc->hw;
1570 struct ath_regulatory *reg;
1572 DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
1574 error = ath_init_softc(devid, sc);
1578 /* get mac address from hardware and set in mac80211 */
1580 SET_IEEE80211_PERM_ADDR(hw, sc->sc_ah->macaddr);
1582 ath_set_hw_capab(sc, hw);
1584 error = ath_regd_init(&sc->sc_ah->regulatory, sc->hw->wiphy,
1585 ath9k_reg_notifier);
1589 reg = &sc->sc_ah->regulatory;
1591 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
1592 setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
1593 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
1594 setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
1597 /* initialize tx/rx engine */
1598 error = ath_tx_init(sc, ATH_TXBUF);
1602 error = ath_rx_init(sc, ATH_RXBUF);
1606 INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
1607 INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
1608 sc->wiphy_scheduler_int = msecs_to_jiffies(500);
1610 error = ieee80211_register_hw(hw);
1612 if (!ath_is_world_regd(reg)) {
1613 error = regulatory_hint(hw->wiphy, reg->alpha2);
1618 /* Initialize LED control */
1621 ath_start_rfkill_poll(sc);
1626 /* cleanup tx queues */
1627 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1628 if (ATH_TXQ_SETUP(sc, i))
1629 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1631 ath9k_hw_detach(sc->sc_ah);
1633 ath9k_exit_debug(sc);
1638 int ath_reset(struct ath_softc *sc, bool retry_tx)
1640 struct ath_hw *ah = sc->sc_ah;
1641 struct ieee80211_hw *hw = sc->hw;
1644 ath9k_hw_set_interrupts(ah, 0);
1645 ath_drain_all_txq(sc, retry_tx);
1649 spin_lock_bh(&sc->sc_resetlock);
1650 r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
1652 DPRINTF(sc, ATH_DBG_FATAL,
1653 "Unable to reset hardware; reset status %d\n", r);
1654 spin_unlock_bh(&sc->sc_resetlock);
1656 if (ath_startrecv(sc) != 0)
1657 DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
1660 * We may be doing a reset in response to a request
1661 * that changes the channel so update any state that
1662 * might change as a result.
1664 ath_cache_conf_rate(sc, &hw->conf);
1666 ath_update_txpow(sc);
1668 if (sc->sc_flags & SC_OP_BEACONS)
1669 ath_beacon_config(sc, NULL); /* restart beacons */
1671 ath9k_hw_set_interrupts(ah, sc->imask);
1675 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1676 if (ATH_TXQ_SETUP(sc, i)) {
1677 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1678 ath_txq_schedule(sc, &sc->tx.txq[i]);
1679 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1688 * This function will allocate both the DMA descriptor structure, and the
1689 * buffers it contains. These are used to contain the descriptors used
1692 int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
1693 struct list_head *head, const char *name,
1694 int nbuf, int ndesc)
1696 #define DS2PHYS(_dd, _ds) \
1697 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
1698 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
1699 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
1701 struct ath_desc *ds;
1703 int i, bsize, error;
1705 DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
1708 INIT_LIST_HEAD(head);
1709 /* ath_desc must be a multiple of DWORDs */
1710 if ((sizeof(struct ath_desc) % 4) != 0) {
1711 DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n");
1712 ASSERT((sizeof(struct ath_desc) % 4) == 0);
1717 dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
1720 * Need additional DMA memory because we can't use
1721 * descriptors that cross the 4K page boundary. Assume
1722 * one skipped descriptor per 4K page.
1724 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1726 ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
1729 while (ndesc_skipped) {
1730 dma_len = ndesc_skipped * sizeof(struct ath_desc);
1731 dd->dd_desc_len += dma_len;
1733 ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
1737 /* allocate descriptors */
1738 dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
1739 &dd->dd_desc_paddr, GFP_KERNEL);
1740 if (dd->dd_desc == NULL) {
1745 DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
1746 name, ds, (u32) dd->dd_desc_len,
1747 ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
1749 /* allocate buffers */
1750 bsize = sizeof(struct ath_buf) * nbuf;
1751 bf = kzalloc(bsize, GFP_KERNEL);
1758 for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
1760 bf->bf_daddr = DS2PHYS(dd, ds);
1762 if (!(sc->sc_ah->caps.hw_caps &
1763 ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1765 * Skip descriptor addresses which can cause 4KB
1766 * boundary crossing (addr + length) with a 32 dword
1769 while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
1770 ASSERT((caddr_t) bf->bf_desc <
1771 ((caddr_t) dd->dd_desc +
1776 bf->bf_daddr = DS2PHYS(dd, ds);
1779 list_add_tail(&bf->list, head);
1783 dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
1786 memset(dd, 0, sizeof(*dd));
1788 #undef ATH_DESC_4KB_BOUND_CHECK
1789 #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
1793 void ath_descdma_cleanup(struct ath_softc *sc,
1794 struct ath_descdma *dd,
1795 struct list_head *head)
1797 dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
1800 INIT_LIST_HEAD(head);
1801 kfree(dd->dd_bufptr);
1802 memset(dd, 0, sizeof(*dd));
1805 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
1811 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO];
1814 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI];
1817 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1820 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK];
1823 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1830 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
1835 case ATH9K_WME_AC_VO:
1838 case ATH9K_WME_AC_VI:
1841 case ATH9K_WME_AC_BE:
1844 case ATH9K_WME_AC_BK:
1855 /* XXX: Remove me once we don't depend on ath9k_channel for all
1856 * this redundant data */
1857 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1858 struct ath9k_channel *ichan)
1860 struct ieee80211_channel *chan = hw->conf.channel;
1861 struct ieee80211_conf *conf = &hw->conf;
1863 ichan->channel = chan->center_freq;
1866 if (chan->band == IEEE80211_BAND_2GHZ) {
1867 ichan->chanmode = CHANNEL_G;
1868 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
1870 ichan->chanmode = CHANNEL_A;
1871 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1874 sc->tx_chan_width = ATH9K_HT_MACMODE_20;
1876 if (conf_is_ht(conf)) {
1877 if (conf_is_ht40(conf))
1878 sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
1880 ichan->chanmode = ath_get_extchanmode(sc, chan,
1881 conf->channel_type);
1885 /**********************/
1886 /* mac80211 callbacks */
1887 /**********************/
1889 static int ath9k_start(struct ieee80211_hw *hw)
1891 struct ath_wiphy *aphy = hw->priv;
1892 struct ath_softc *sc = aphy->sc;
1893 struct ieee80211_channel *curchan = hw->conf.channel;
1894 struct ath9k_channel *init_channel;
1897 DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
1898 "initial channel: %d MHz\n", curchan->center_freq);
1900 mutex_lock(&sc->mutex);
1902 if (ath9k_wiphy_started(sc)) {
1903 if (sc->chan_idx == curchan->hw_value) {
1905 * Already on the operational channel, the new wiphy
1906 * can be marked active.
1908 aphy->state = ATH_WIPHY_ACTIVE;
1909 ieee80211_wake_queues(hw);
1912 * Another wiphy is on another channel, start the new
1913 * wiphy in paused state.
1915 aphy->state = ATH_WIPHY_PAUSED;
1916 ieee80211_stop_queues(hw);
1918 mutex_unlock(&sc->mutex);
1921 aphy->state = ATH_WIPHY_ACTIVE;
1923 /* setup initial channel */
1925 sc->chan_idx = curchan->hw_value;
1927 init_channel = ath_get_curchannel(sc, hw);
1929 /* Reset SERDES registers */
1930 ath9k_hw_configpcipowersave(sc->sc_ah, 0);
1933 * The basic interface to setting the hardware in a good
1934 * state is ``reset''. On return the hardware is known to
1935 * be powered up and with interrupts disabled. This must
1936 * be followed by initialization of the appropriate bits
1937 * and then setup of the interrupt mask.
1939 spin_lock_bh(&sc->sc_resetlock);
1940 r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
1942 DPRINTF(sc, ATH_DBG_FATAL,
1943 "Unable to reset hardware; reset status %d "
1944 "(freq %u MHz)\n", r,
1945 curchan->center_freq);
1946 spin_unlock_bh(&sc->sc_resetlock);
1949 spin_unlock_bh(&sc->sc_resetlock);
1952 * This is needed only to setup initial state
1953 * but it's best done after a reset.
1955 ath_update_txpow(sc);
1958 * Setup the hardware after reset:
1959 * The receive engine is set going.
1960 * Frame transmit is handled entirely
1961 * in the frame output path; there's nothing to do
1962 * here except setup the interrupt mask.
1964 if (ath_startrecv(sc) != 0) {
1965 DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
1970 /* Setup our intr mask. */
1971 sc->imask = ATH9K_INT_RX | ATH9K_INT_TX
1972 | ATH9K_INT_RXEOL | ATH9K_INT_RXORN
1973 | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
1975 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
1976 sc->imask |= ATH9K_INT_GTT;
1978 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
1979 sc->imask |= ATH9K_INT_CST;
1981 ath_cache_conf_rate(sc, &hw->conf);
1983 sc->sc_flags &= ~SC_OP_INVALID;
1985 /* Disable BMISS interrupt when we're not associated */
1986 sc->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
1987 ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
1989 ieee80211_wake_queues(hw);
1991 ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
1994 mutex_unlock(&sc->mutex);
1999 static int ath9k_tx(struct ieee80211_hw *hw,
2000 struct sk_buff *skb)
2002 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2003 struct ath_wiphy *aphy = hw->priv;
2004 struct ath_softc *sc = aphy->sc;
2005 struct ath_tx_control txctl;
2006 int hdrlen, padsize;
2008 if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
2009 printk(KERN_DEBUG "ath9k: %s: TX in unexpected wiphy state "
2010 "%d\n", wiphy_name(hw->wiphy), aphy->state);
2014 if (sc->ps_enabled) {
2015 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2017 * mac80211 does not set PM field for normal data frames, so we
2018 * need to update that based on the current PS mode.
2020 if (ieee80211_is_data(hdr->frame_control) &&
2021 !ieee80211_is_nullfunc(hdr->frame_control) &&
2022 !ieee80211_has_pm(hdr->frame_control)) {
2023 DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame "
2024 "while in PS mode\n");
2025 hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
2029 if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
2031 * We are using PS-Poll and mac80211 can request TX while in
2032 * power save mode. Need to wake up hardware for the TX to be
2033 * completed and if needed, also for RX of buffered frames.
2035 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2036 ath9k_ps_wakeup(sc);
2037 ath9k_hw_setrxabort(sc->sc_ah, 0);
2038 if (ieee80211_is_pspoll(hdr->frame_control)) {
2039 DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a "
2040 "buffered frame\n");
2041 sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
2043 DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n");
2044 sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
2047 * The actual restore operation will happen only after
2048 * the sc_flags bit is cleared. We are just dropping
2049 * the ps_usecount here.
2051 ath9k_ps_restore(sc);
2054 memset(&txctl, 0, sizeof(struct ath_tx_control));
2057 * As a temporary workaround, assign seq# here; this will likely need
2058 * to be cleaned up to work better with Beacon transmission and virtual
2061 if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
2062 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2063 if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
2064 sc->tx.seq_no += 0x10;
2065 hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
2066 hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
2069 /* Add the padding after the header if this is not already done */
2070 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
2072 padsize = hdrlen % 4;
2073 if (skb_headroom(skb) < padsize)
2075 skb_push(skb, padsize);
2076 memmove(skb->data, skb->data + padsize, hdrlen);
2079 /* Check if a tx queue is available */
2081 txctl.txq = ath_test_get_txq(sc, skb);
2085 DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
2087 if (ath_tx_start(hw, skb, &txctl) != 0) {
2088 DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n");
2094 dev_kfree_skb_any(skb);
2098 static void ath9k_stop(struct ieee80211_hw *hw)
2100 struct ath_wiphy *aphy = hw->priv;
2101 struct ath_softc *sc = aphy->sc;
2103 aphy->state = ATH_WIPHY_INACTIVE;
2105 cancel_delayed_work_sync(&sc->ath_led_blink_work);
2106 cancel_delayed_work_sync(&sc->tx_complete_work);
2108 if (!sc->num_sec_wiphy) {
2109 cancel_delayed_work_sync(&sc->wiphy_work);
2110 cancel_work_sync(&sc->chan_work);
2113 if (sc->sc_flags & SC_OP_INVALID) {
2114 DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
2118 mutex_lock(&sc->mutex);
2120 cancel_delayed_work_sync(&sc->tx_complete_work);
2122 if (ath9k_wiphy_started(sc)) {
2123 mutex_unlock(&sc->mutex);
2124 return; /* another wiphy still in use */
2127 /* make sure h/w will not generate any interrupt
2128 * before setting the invalid flag. */
2129 ath9k_hw_set_interrupts(sc->sc_ah, 0);
2131 if (!(sc->sc_flags & SC_OP_INVALID)) {
2132 ath_drain_all_txq(sc, false);
2134 ath9k_hw_phy_disable(sc->sc_ah);
2136 sc->rx.rxlink = NULL;
2138 wiphy_rfkill_stop_polling(sc->hw->wiphy);
2140 /* disable HAL and put h/w to sleep */
2141 ath9k_hw_disable(sc->sc_ah);
2142 ath9k_hw_configpcipowersave(sc->sc_ah, 1);
2144 sc->sc_flags |= SC_OP_INVALID;
2146 mutex_unlock(&sc->mutex);
2148 DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n");
2151 static int ath9k_add_interface(struct ieee80211_hw *hw,
2152 struct ieee80211_if_init_conf *conf)
2154 struct ath_wiphy *aphy = hw->priv;
2155 struct ath_softc *sc = aphy->sc;
2156 struct ath_vif *avp = (void *)conf->vif->drv_priv;
2157 enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
2160 mutex_lock(&sc->mutex);
2162 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) &&
2168 switch (conf->type) {
2169 case NL80211_IFTYPE_STATION:
2170 ic_opmode = NL80211_IFTYPE_STATION;
2172 case NL80211_IFTYPE_ADHOC:
2173 case NL80211_IFTYPE_AP:
2174 case NL80211_IFTYPE_MESH_POINT:
2175 if (sc->nbcnvifs >= ATH_BCBUF) {
2179 ic_opmode = conf->type;
2182 DPRINTF(sc, ATH_DBG_FATAL,
2183 "Interface type %d not yet supported\n", conf->type);
2188 DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VIF of type: %d\n", ic_opmode);
2190 /* Set the VIF opmode */
2191 avp->av_opmode = ic_opmode;
2196 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
2197 ath9k_set_bssid_mask(hw);
2200 goto out; /* skip global settings for secondary vif */
2202 if (ic_opmode == NL80211_IFTYPE_AP) {
2203 ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
2204 sc->sc_flags |= SC_OP_TSF_RESET;
2207 /* Set the device opmode */
2208 sc->sc_ah->opmode = ic_opmode;
2211 * Enable MIB interrupts when there are hardware phy counters.
2212 * Note we only do this (at the moment) for station mode.
2214 if ((conf->type == NL80211_IFTYPE_STATION) ||
2215 (conf->type == NL80211_IFTYPE_ADHOC) ||
2216 (conf->type == NL80211_IFTYPE_MESH_POINT)) {
2217 if (ath9k_hw_phycounters(sc->sc_ah))
2218 sc->imask |= ATH9K_INT_MIB;
2219 sc->imask |= ATH9K_INT_TSFOOR;
2222 ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
2224 if (conf->type == NL80211_IFTYPE_AP ||
2225 conf->type == NL80211_IFTYPE_ADHOC ||
2226 conf->type == NL80211_IFTYPE_MONITOR)
2230 mutex_unlock(&sc->mutex);
2234 static void ath9k_remove_interface(struct ieee80211_hw *hw,
2235 struct ieee80211_if_init_conf *conf)
2237 struct ath_wiphy *aphy = hw->priv;
2238 struct ath_softc *sc = aphy->sc;
2239 struct ath_vif *avp = (void *)conf->vif->drv_priv;
2242 DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
2244 mutex_lock(&sc->mutex);
2247 del_timer_sync(&sc->ani.timer);
2249 /* Reclaim beacon resources */
2250 if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
2251 (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
2252 (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
2253 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2254 ath_beacon_return(sc, avp);
2257 sc->sc_flags &= ~SC_OP_BEACONS;
2259 for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
2260 if (sc->beacon.bslot[i] == conf->vif) {
2261 printk(KERN_DEBUG "%s: vif had allocated beacon "
2262 "slot\n", __func__);
2263 sc->beacon.bslot[i] = NULL;
2264 sc->beacon.bslot_aphy[i] = NULL;
2270 mutex_unlock(&sc->mutex);
2273 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
2275 struct ath_wiphy *aphy = hw->priv;
2276 struct ath_softc *sc = aphy->sc;
2277 struct ieee80211_conf *conf = &hw->conf;
2278 struct ath_hw *ah = sc->sc_ah;
2279 bool all_wiphys_idle = false, disable_radio = false;
2281 mutex_lock(&sc->mutex);
2283 /* Leave this as the first check */
2284 if (changed & IEEE80211_CONF_CHANGE_IDLE) {
2286 spin_lock_bh(&sc->wiphy_lock);
2287 all_wiphys_idle = ath9k_all_wiphys_idle(sc);
2288 spin_unlock_bh(&sc->wiphy_lock);
2290 if (conf->flags & IEEE80211_CONF_IDLE){
2291 if (all_wiphys_idle)
2292 disable_radio = true;
2294 else if (all_wiphys_idle) {
2295 ath_radio_enable(sc);
2296 DPRINTF(sc, ATH_DBG_CONFIG,
2297 "not-idle: enabling radio\n");
2301 if (changed & IEEE80211_CONF_CHANGE_PS) {
2302 if (conf->flags & IEEE80211_CONF_PS) {
2303 if (!(ah->caps.hw_caps &
2304 ATH9K_HW_CAP_AUTOSLEEP)) {
2305 if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
2306 sc->imask |= ATH9K_INT_TIM_TIMER;
2307 ath9k_hw_set_interrupts(sc->sc_ah,
2310 ath9k_hw_setrxabort(sc->sc_ah, 1);
2312 sc->ps_enabled = true;
2314 sc->ps_enabled = false;
2315 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
2316 if (!(ah->caps.hw_caps &
2317 ATH9K_HW_CAP_AUTOSLEEP)) {
2318 ath9k_hw_setrxabort(sc->sc_ah, 0);
2319 sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
2320 SC_OP_WAIT_FOR_CAB |
2321 SC_OP_WAIT_FOR_PSPOLL_DATA |
2322 SC_OP_WAIT_FOR_TX_ACK);
2323 if (sc->imask & ATH9K_INT_TIM_TIMER) {
2324 sc->imask &= ~ATH9K_INT_TIM_TIMER;
2325 ath9k_hw_set_interrupts(sc->sc_ah,
2332 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
2333 struct ieee80211_channel *curchan = hw->conf.channel;
2334 int pos = curchan->hw_value;
2336 aphy->chan_idx = pos;
2337 aphy->chan_is_ht = conf_is_ht(conf);
2339 if (aphy->state == ATH_WIPHY_SCAN ||
2340 aphy->state == ATH_WIPHY_ACTIVE)
2341 ath9k_wiphy_pause_all_forced(sc, aphy);
2344 * Do not change operational channel based on a paused
2347 goto skip_chan_change;
2350 DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
2351 curchan->center_freq);
2353 /* XXX: remove me eventualy */
2354 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
2356 ath_update_chainmask(sc, conf_is_ht(conf));
2358 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
2359 DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
2360 mutex_unlock(&sc->mutex);
2366 if (changed & IEEE80211_CONF_CHANGE_POWER)
2367 sc->config.txpowlimit = 2 * conf->power_level;
2369 if (disable_radio) {
2370 DPRINTF(sc, ATH_DBG_CONFIG, "idle: disabling radio\n");
2371 ath_radio_disable(sc);
2374 mutex_unlock(&sc->mutex);
2379 #define SUPPORTED_FILTERS \
2380 (FIF_PROMISC_IN_BSS | \
2385 FIF_BCN_PRBRESP_PROMISC | \
2388 /* FIXME: sc->sc_full_reset ? */
2389 static void ath9k_configure_filter(struct ieee80211_hw *hw,
2390 unsigned int changed_flags,
2391 unsigned int *total_flags,
2393 struct dev_mc_list *mclist)
2395 struct ath_wiphy *aphy = hw->priv;
2396 struct ath_softc *sc = aphy->sc;
2399 changed_flags &= SUPPORTED_FILTERS;
2400 *total_flags &= SUPPORTED_FILTERS;
2402 sc->rx.rxfilter = *total_flags;
2403 ath9k_ps_wakeup(sc);
2404 rfilt = ath_calcrxfilter(sc);
2405 ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
2406 ath9k_ps_restore(sc);
2408 DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
2411 static void ath9k_sta_notify(struct ieee80211_hw *hw,
2412 struct ieee80211_vif *vif,
2413 enum sta_notify_cmd cmd,
2414 struct ieee80211_sta *sta)
2416 struct ath_wiphy *aphy = hw->priv;
2417 struct ath_softc *sc = aphy->sc;
2420 case STA_NOTIFY_ADD:
2421 ath_node_attach(sc, sta);
2423 case STA_NOTIFY_REMOVE:
2424 ath_node_detach(sc, sta);
2431 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
2432 const struct ieee80211_tx_queue_params *params)
2434 struct ath_wiphy *aphy = hw->priv;
2435 struct ath_softc *sc = aphy->sc;
2436 struct ath9k_tx_queue_info qi;
2439 if (queue >= WME_NUM_AC)
2442 mutex_lock(&sc->mutex);
2444 memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
2446 qi.tqi_aifs = params->aifs;
2447 qi.tqi_cwmin = params->cw_min;
2448 qi.tqi_cwmax = params->cw_max;
2449 qi.tqi_burstTime = params->txop;
2450 qnum = ath_get_hal_qnum(queue, sc);
2452 DPRINTF(sc, ATH_DBG_CONFIG,
2453 "Configure tx [queue/halq] [%d/%d], "
2454 "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
2455 queue, qnum, params->aifs, params->cw_min,
2456 params->cw_max, params->txop);
2458 ret = ath_txq_update(sc, qnum, &qi);
2460 DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n");
2462 mutex_unlock(&sc->mutex);
2467 static int ath9k_set_key(struct ieee80211_hw *hw,
2468 enum set_key_cmd cmd,
2469 struct ieee80211_vif *vif,
2470 struct ieee80211_sta *sta,
2471 struct ieee80211_key_conf *key)
2473 struct ath_wiphy *aphy = hw->priv;
2474 struct ath_softc *sc = aphy->sc;
2477 if (modparam_nohwcrypt)
2480 mutex_lock(&sc->mutex);
2481 ath9k_ps_wakeup(sc);
2482 DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n");
2486 ret = ath_key_config(sc, vif, sta, key);
2488 key->hw_key_idx = ret;
2489 /* push IV and Michael MIC generation to stack */
2490 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
2491 if (key->alg == ALG_TKIP)
2492 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
2493 if (sc->sc_ah->sw_mgmt_crypto && key->alg == ALG_CCMP)
2494 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
2499 ath_key_delete(sc, key);
2505 ath9k_ps_restore(sc);
2506 mutex_unlock(&sc->mutex);
2511 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
2512 struct ieee80211_vif *vif,
2513 struct ieee80211_bss_conf *bss_conf,
2516 struct ath_wiphy *aphy = hw->priv;
2517 struct ath_softc *sc = aphy->sc;
2518 struct ath_hw *ah = sc->sc_ah;
2519 struct ath_vif *avp = (void *)vif->drv_priv;
2523 mutex_lock(&sc->mutex);
2526 * TODO: Need to decide which hw opmode to use for
2527 * multi-interface cases
2528 * XXX: This belongs into add_interface!
2530 if (vif->type == NL80211_IFTYPE_AP &&
2531 ah->opmode != NL80211_IFTYPE_AP) {
2532 ah->opmode = NL80211_IFTYPE_STATION;
2533 ath9k_hw_setopmode(ah);
2534 memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
2536 ath9k_hw_write_associd(sc);
2537 /* Request full reset to get hw opmode changed properly */
2538 sc->sc_flags |= SC_OP_FULL_RESET;
2541 if ((changed & BSS_CHANGED_BSSID) &&
2542 !is_zero_ether_addr(bss_conf->bssid)) {
2543 switch (vif->type) {
2544 case NL80211_IFTYPE_STATION:
2545 case NL80211_IFTYPE_ADHOC:
2546 case NL80211_IFTYPE_MESH_POINT:
2548 memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
2549 memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
2551 ath9k_hw_write_associd(sc);
2553 /* Set aggregation protection mode parameters */
2554 sc->config.ath_aggr_prot = 0;
2556 DPRINTF(sc, ATH_DBG_CONFIG,
2557 "RX filter 0x%x bssid %pM aid 0x%x\n",
2558 rfilt, sc->curbssid, sc->curaid);
2560 /* need to reconfigure the beacon */
2561 sc->sc_flags &= ~SC_OP_BEACONS ;
2569 if ((vif->type == NL80211_IFTYPE_ADHOC) ||
2570 (vif->type == NL80211_IFTYPE_AP) ||
2571 (vif->type == NL80211_IFTYPE_MESH_POINT)) {
2572 if ((changed & BSS_CHANGED_BEACON) ||
2573 (changed & BSS_CHANGED_BEACON_ENABLED &&
2574 bss_conf->enable_beacon)) {
2576 * Allocate and setup the beacon frame.
2578 * Stop any previous beacon DMA. This may be
2579 * necessary, for example, when an ibss merge
2580 * causes reconfiguration; we may be called
2581 * with beacon transmission active.
2583 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2585 error = ath_beacon_alloc(aphy, vif);
2587 ath_beacon_config(sc, vif);
2591 /* Check for WLAN_CAPABILITY_PRIVACY ? */
2592 if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
2593 for (i = 0; i < IEEE80211_WEP_NKID; i++)
2594 if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
2595 ath9k_hw_keysetmac(sc->sc_ah,
2600 /* Only legacy IBSS for now */
2601 if (vif->type == NL80211_IFTYPE_ADHOC)
2602 ath_update_chainmask(sc, 0);
2604 if (changed & BSS_CHANGED_ERP_PREAMBLE) {
2605 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
2606 bss_conf->use_short_preamble);
2607 if (bss_conf->use_short_preamble)
2608 sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
2610 sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
2613 if (changed & BSS_CHANGED_ERP_CTS_PROT) {
2614 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
2615 bss_conf->use_cts_prot);
2616 if (bss_conf->use_cts_prot &&
2617 hw->conf.channel->band != IEEE80211_BAND_5GHZ)
2618 sc->sc_flags |= SC_OP_PROTECT_ENABLE;
2620 sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
2623 if (changed & BSS_CHANGED_ASSOC) {
2624 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
2626 ath9k_bss_assoc_info(sc, vif, bss_conf);
2630 * The HW TSF has to be reset when the beacon interval changes.
2631 * We set the flag here, and ath_beacon_config_ap() would take this
2632 * into account when it gets called through the subsequent
2633 * config_interface() call - with IFCC_BEACON in the changed field.
2636 if (changed & BSS_CHANGED_BEACON_INT) {
2637 sc->sc_flags |= SC_OP_TSF_RESET;
2638 sc->beacon_interval = bss_conf->beacon_int;
2641 mutex_unlock(&sc->mutex);
2644 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
2647 struct ath_wiphy *aphy = hw->priv;
2648 struct ath_softc *sc = aphy->sc;
2650 mutex_lock(&sc->mutex);
2651 tsf = ath9k_hw_gettsf64(sc->sc_ah);
2652 mutex_unlock(&sc->mutex);
2657 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
2659 struct ath_wiphy *aphy = hw->priv;
2660 struct ath_softc *sc = aphy->sc;
2662 mutex_lock(&sc->mutex);
2663 ath9k_hw_settsf64(sc->sc_ah, tsf);
2664 mutex_unlock(&sc->mutex);
2667 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
2669 struct ath_wiphy *aphy = hw->priv;
2670 struct ath_softc *sc = aphy->sc;
2672 mutex_lock(&sc->mutex);
2673 ath9k_hw_reset_tsf(sc->sc_ah);
2674 mutex_unlock(&sc->mutex);
2677 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
2678 enum ieee80211_ampdu_mlme_action action,
2679 struct ieee80211_sta *sta,
2682 struct ath_wiphy *aphy = hw->priv;
2683 struct ath_softc *sc = aphy->sc;
2687 case IEEE80211_AMPDU_RX_START:
2688 if (!(sc->sc_flags & SC_OP_RXAGGR))
2691 case IEEE80211_AMPDU_RX_STOP:
2693 case IEEE80211_AMPDU_TX_START:
2694 ath_tx_aggr_start(sc, sta, tid, ssn);
2695 ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2697 case IEEE80211_AMPDU_TX_STOP:
2698 ath_tx_aggr_stop(sc, sta, tid);
2699 ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2701 case IEEE80211_AMPDU_TX_OPERATIONAL:
2702 ath_tx_aggr_resume(sc, sta, tid);
2705 DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n");
2711 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2713 struct ath_wiphy *aphy = hw->priv;
2714 struct ath_softc *sc = aphy->sc;
2716 if (ath9k_wiphy_scanning(sc)) {
2717 printk(KERN_DEBUG "ath9k: Two wiphys trying to scan at the "
2720 * Do not allow the concurrent scanning state for now. This
2721 * could be improved with scanning control moved into ath9k.
2726 aphy->state = ATH_WIPHY_SCAN;
2727 ath9k_wiphy_pause_all_forced(sc, aphy);
2729 spin_lock_bh(&sc->ani_lock);
2730 sc->sc_flags |= SC_OP_SCANNING;
2731 spin_unlock_bh(&sc->ani_lock);
2734 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2736 struct ath_wiphy *aphy = hw->priv;
2737 struct ath_softc *sc = aphy->sc;
2739 spin_lock_bh(&sc->ani_lock);
2740 aphy->state = ATH_WIPHY_ACTIVE;
2741 sc->sc_flags &= ~SC_OP_SCANNING;
2742 sc->sc_flags |= SC_OP_FULL_RESET;
2743 spin_unlock_bh(&sc->ani_lock);
2746 struct ieee80211_ops ath9k_ops = {
2748 .start = ath9k_start,
2750 .add_interface = ath9k_add_interface,
2751 .remove_interface = ath9k_remove_interface,
2752 .config = ath9k_config,
2753 .configure_filter = ath9k_configure_filter,
2754 .sta_notify = ath9k_sta_notify,
2755 .conf_tx = ath9k_conf_tx,
2756 .bss_info_changed = ath9k_bss_info_changed,
2757 .set_key = ath9k_set_key,
2758 .get_tsf = ath9k_get_tsf,
2759 .set_tsf = ath9k_set_tsf,
2760 .reset_tsf = ath9k_reset_tsf,
2761 .ampdu_action = ath9k_ampdu_action,
2762 .sw_scan_start = ath9k_sw_scan_start,
2763 .sw_scan_complete = ath9k_sw_scan_complete,
2764 .rfkill_poll = ath9k_rfkill_poll_state,
2770 } ath_mac_bb_names[] = {
2771 { AR_SREV_VERSION_5416_PCI, "5416" },
2772 { AR_SREV_VERSION_5416_PCIE, "5418" },
2773 { AR_SREV_VERSION_9100, "9100" },
2774 { AR_SREV_VERSION_9160, "9160" },
2775 { AR_SREV_VERSION_9280, "9280" },
2776 { AR_SREV_VERSION_9285, "9285" },
2777 { AR_SREV_VERSION_9287, "9287" }
2783 } ath_rf_names[] = {
2785 { AR_RAD5133_SREV_MAJOR, "5133" },
2786 { AR_RAD5122_SREV_MAJOR, "5122" },
2787 { AR_RAD2133_SREV_MAJOR, "2133" },
2788 { AR_RAD2122_SREV_MAJOR, "2122" }
2792 * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
2795 ath_mac_bb_name(u32 mac_bb_version)
2799 for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
2800 if (ath_mac_bb_names[i].version == mac_bb_version) {
2801 return ath_mac_bb_names[i].name;
2809 * Return the RF name. "????" is returned if the RF is unknown.
2812 ath_rf_name(u16 rf_version)
2816 for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
2817 if (ath_rf_names[i].version == rf_version) {
2818 return ath_rf_names[i].name;
2825 static int __init ath9k_init(void)
2829 /* Register rate control algorithm */
2830 error = ath_rate_control_register();
2833 "ath9k: Unable to register rate control "
2839 error = ath9k_debug_create_root();
2842 "ath9k: Unable to create debugfs root: %d\n",
2844 goto err_rate_unregister;
2847 error = ath_pci_init();
2850 "ath9k: No PCI devices found, driver not installed.\n");
2852 goto err_remove_root;
2855 error = ath_ahb_init();
2867 ath9k_debug_remove_root();
2868 err_rate_unregister:
2869 ath_rate_control_unregister();
2873 module_init(ath9k_init);
2875 static void __exit ath9k_exit(void)
2879 ath9k_debug_remove_root();
2880 ath_rate_control_unregister();
2881 printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
2883 module_exit(ath9k_exit);