drivers/net/wireless/ath/ath9k/main.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/nl80211.h>
  18 #include "ath9k.h"
  19 #include "btcoex.h"
  20
  21 static void ath_update_txpow(struct ath_softc *sc)
  22 {
  23         struct ath_hw *ah = sc->sc_ah;
  24
  25         if (sc->curtxpow != sc->config.txpowlimit) {
  26                 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
  27                 /* read back in case value is clamped */
  28                 sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
  29         }
  30 }
  31
  32 static u8 parse_mpdudensity(u8 mpdudensity)
  33 {
  34         /*
  35          * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
  36          *   0 for no restriction
  37          *   1 for 1/4 us
  38          *   2 for 1/2 us
  39          *   3 for 1 us
  40          *   4 for 2 us
  41          *   5 for 4 us
  42          *   6 for 8 us
  43          *   7 for 16 us
  44          */
  45         switch (mpdudensity) {
  46         case 0:
  47                 return 0;
  48         case 1:
  49         case 2:
  50         case 3:
  51                 /* Our lower layer calculations limit our precision to
  52                    1 microsecond */
  53                 return 1;
  54         case 4:
  55                 return 2;
  56         case 5:
  57                 return 4;
  58         case 6:
  59                 return 8;
  60         case 7:
  61                 return 16;
  62         default:
  63                 return 0;
  64         }
  65 }
  66
  67 static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
  68                                                 struct ieee80211_hw *hw)
  69 {
  70         struct ieee80211_channel *curchan = hw->conf.channel;
  71         struct ath9k_channel *channel;
  72         u8 chan_idx;
  73
  74         chan_idx = curchan->hw_value;
  75         channel = &sc->sc_ah->channels[chan_idx];
  76         ath9k_update_ichannel(sc, hw, channel);
  77         return channel;
  78 }
  79
  80 bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
  81 {
  82         unsigned long flags;
  83         bool ret;
  84
  85         spin_lock_irqsave(&sc->sc_pm_lock, flags);
  86         ret = ath9k_hw_setpower(sc->sc_ah, mode);
  87         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
  88
  89         return ret;
  90 }
  91
  92 void ath9k_ps_wakeup(struct ath_softc *sc)
  93 {
  94         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
  95         unsigned long flags;
  96
  97         spin_lock_irqsave(&sc->sc_pm_lock, flags);
  98         if (++sc->ps_usecount != 1)
  99                 goto unlock;
 100
 101         ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
 102
 103         /*
 104          * While the hardware is asleep, the cycle counters contain no
 105          * useful data. Better clear them now so that they don't mess up
 106          * survey data results.
 107          */
 108         spin_lock(&common->cc_lock);
 109         ath_hw_cycle_counters_update(common);
 110         memset(&common->cc_survey, 0, sizeof(common->cc_survey));
 111         spin_unlock(&common->cc_lock);
 112
 113  unlock:
 114         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 115 }
 116
 117 void ath9k_ps_restore(struct ath_softc *sc)
 118 {
 119         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 120         unsigned long flags;
 121
 122         spin_lock_irqsave(&sc->sc_pm_lock, flags);
 123         if (--sc->ps_usecount != 0)
 124                 goto unlock;
 125
 126         spin_lock(&common->cc_lock);
 127         ath_hw_cycle_counters_update(common);
 128         spin_unlock(&common->cc_lock);
 129
 130         if (sc->ps_idle)
 131                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
 132         else if (sc->ps_enabled &&
 133                  !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
 134                               PS_WAIT_FOR_CAB |
 135                               PS_WAIT_FOR_PSPOLL_DATA |
 136                               PS_WAIT_FOR_TX_ACK)))
 137                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 138
 139  unlock:
 140         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 141 }
 142
 143 static void ath_start_ani(struct ath_common *common)
 144 {
 145         struct ath_hw *ah = common->ah;
 146         unsigned long timestamp = jiffies_to_msecs(jiffies);
 147         struct ath_softc *sc = (struct ath_softc *) common->priv;
 148
 149         if (!(sc->sc_flags & SC_OP_ANI_RUN))
 150                 return;
 151
 152         if (sc->sc_flags & SC_OP_OFFCHANNEL)
 153                 return;
 154
 155         common->ani.longcal_timer = timestamp;
 156         common->ani.shortcal_timer = timestamp;
 157         common->ani.checkani_timer = timestamp;
 158
 159         mod_timer(&common->ani.timer,
 160                   jiffies +
 161                         msecs_to_jiffies((u32)ah->config.ani_poll_interval));
 162 }
 163
 164 static void ath_update_survey_nf(struct ath_softc *sc, int channel)
 165 {
 166         struct ath_hw *ah = sc->sc_ah;
 167         struct ath9k_channel *chan = &ah->channels[channel];
 168         struct survey_info *survey = &sc->survey[channel];
 169
 170         if (chan->noisefloor) {
 171                 survey->filled |= SURVEY_INFO_NOISE_DBM;
 172                 survey->noise = chan->noisefloor;
 173         }
 174 }
 175
 176 static void ath_update_survey_stats(struct ath_softc *sc)
 177 {
 178         struct ath_hw *ah = sc->sc_ah;
 179         struct ath_common *common = ath9k_hw_common(ah);
 180         int pos = ah->curchan - &ah->channels[0];
 181         struct survey_info *survey = &sc->survey[pos];
 182         struct ath_cycle_counters *cc = &common->cc_survey;
 183         unsigned int div = common->clockrate * 1000;
 184
 185         if (!ah->curchan)
 186                 return;
 187
 188         if (ah->power_mode == ATH9K_PM_AWAKE)
 189                 ath_hw_cycle_counters_update(common);
 190
 191         if (cc->cycles > 0) {
 192                 survey->filled |= SURVEY_INFO_CHANNEL_TIME |
 193                         SURVEY_INFO_CHANNEL_TIME_BUSY |
 194                         SURVEY_INFO_CHANNEL_TIME_RX |
 195                         SURVEY_INFO_CHANNEL_TIME_TX;
 196                 survey->channel_time += cc->cycles / div;
 197                 survey->channel_time_busy += cc->rx_busy / div;
 198                 survey->channel_time_rx += cc->rx_frame / div;
 199                 survey->channel_time_tx += cc->tx_frame / div;
 200         }
 201         memset(cc, 0, sizeof(*cc));
 202
 203         ath_update_survey_nf(sc, pos);
 204 }
 205
 206 /*
 207  * Set/change channels.  If the channel is really being changed, it's done
 208  * by reseting the chip.  To accomplish this we must first cleanup any pending
 209  * DMA, then restart stuff.
 210 */
 211 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 212                     struct ath9k_channel *hchan)
 213 {
 214         struct ath_wiphy *aphy = hw->priv;
 215         struct ath_hw *ah = sc->sc_ah;
 216         struct ath_common *common = ath9k_hw_common(ah);
 217         struct ieee80211_conf *conf = &common->hw->conf;
 218         bool fastcc = true, stopped;
 219         struct ieee80211_channel *channel = hw->conf.channel;
 220         struct ath9k_hw_cal_data *caldata = NULL;
 221         int r;
 222
 223         if (sc->sc_flags & SC_OP_INVALID)
 224                 return -EIO;
 225
 226         del_timer_sync(&common->ani.timer);
 227         cancel_work_sync(&sc->paprd_work);
 228         cancel_work_sync(&sc->hw_check_work);
 229         cancel_delayed_work_sync(&sc->tx_complete_work);
 230
 231         ath9k_ps_wakeup(sc);
 232
 233         /*
 234          * This is only performed if the channel settings have
 235          * actually changed.
 236          *
 237          * To switch channels clear any pending DMA operations;
 238          * wait long enough for the RX fifo to drain, reset the
 239          * hardware at the new frequency, and then re-enable
 240          * the relevant bits of the h/w.
 241          */
 242         ath9k_hw_set_interrupts(ah, 0);
 243         ath_drain_all_txq(sc, false);
 244
 245         spin_lock_bh(&sc->rx.pcu_lock);
 246
 247         stopped = ath_stoprecv(sc);
 248
 249         /* XXX: do not flush receive queue here. We don't want
 250          * to flush data frames already in queue because of
 251          * changing channel. */
 252
 253         if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
 254                 fastcc = false;
 255
 256         if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
 257                 caldata = &aphy->caldata;
 258
 259         ath_print(common, ATH_DBG_CONFIG,
 260                   "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
 261                   sc->sc_ah->curchan->channel,
 262                   channel->center_freq, conf_is_ht40(conf),
 263                   fastcc);
 264
 265         spin_lock_bh(&sc->sc_resetlock);
 266
 267         r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 268         if (r) {
 269                 ath_print(common, ATH_DBG_FATAL,
 270                           "Unable to reset channel (%u MHz), "
 271                           "reset status %d\n",
 272                           channel->center_freq, r);
 273                 spin_unlock_bh(&sc->sc_resetlock);
 274                 spin_unlock_bh(&sc->rx.pcu_lock);
 275                 goto ps_restore;
 276         }
 277         spin_unlock_bh(&sc->sc_resetlock);
 278
 279         if (ath_startrecv(sc) != 0) {
 280                 ath_print(common, ATH_DBG_FATAL,
 281                           "Unable to restart recv logic\n");
 282                 r = -EIO;
 283                 spin_unlock_bh(&sc->rx.pcu_lock);
 284                 goto ps_restore;
 285         }
 286
 287         spin_unlock_bh(&sc->rx.pcu_lock);
 288
 289         ath_update_txpow(sc);
 290         ath9k_hw_set_interrupts(ah, ah->imask);
 291
 292         if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
 293                 ath_beacon_config(sc, NULL);
 294                 ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 295                 ath_start_ani(common);
 296         }
 297
 298  ps_restore:
 299         ath9k_ps_restore(sc);
 300         return r;
 301 }
 302
 303 static void ath_paprd_activate(struct ath_softc *sc)
 304 {
 305         struct ath_hw *ah = sc->sc_ah;
 306         struct ath9k_hw_cal_data *caldata = ah->caldata;
 307         struct ath_common *common = ath9k_hw_common(ah);
 308         int chain;
 309
 310         if (!caldata || !caldata->paprd_done)
 311                 return;
 312
 313         ath9k_ps_wakeup(sc);
 314         ar9003_paprd_enable(ah, false);
 315         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 316                 if (!(common->tx_chainmask & BIT(chain)))
 317                         continue;
 318
 319                 ar9003_paprd_populate_single_table(ah, caldata, chain);
 320         }
 321
 322         ar9003_paprd_enable(ah, true);
 323         ath9k_ps_restore(sc);
 324 }
 325
 326 void ath_paprd_calibrate(struct work_struct *work)
 327 {
 328         struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
 329         struct ieee80211_hw *hw = sc->hw;
 330         struct ath_hw *ah = sc->sc_ah;
 331         struct ieee80211_hdr *hdr;
 332         struct sk_buff *skb = NULL;
 333         struct ieee80211_tx_info *tx_info;
 334         int band = hw->conf.channel->band;
 335         struct ieee80211_supported_band *sband = &sc->sbands[band];
 336         struct ath_tx_control txctl;
 337         struct ath9k_hw_cal_data *caldata = ah->caldata;
 338         struct ath_common *common = ath9k_hw_common(ah);
 339         int qnum, ftype;
 340         int chain_ok = 0;
 341         int chain;
 342         int len = 1800;
 343         int time_left;
 344         int i;
 345
 346         if (!caldata)
 347                 return;
 348
 349         skb = alloc_skb(len, GFP_KERNEL);
 350         if (!skb)
 351                 return;
 352
 353         tx_info = IEEE80211_SKB_CB(skb);
 354
 355         skb_put(skb, len);
 356         memset(skb->data, 0, len);
 357         hdr = (struct ieee80211_hdr *)skb->data;
 358         ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC;
 359         hdr->frame_control = cpu_to_le16(ftype);
 360         hdr->duration_id = cpu_to_le16(10);
 361         memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
 362         memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 363         memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 364
 365         memset(&txctl, 0, sizeof(txctl));
 366         qnum = sc->tx.hwq_map[WME_AC_BE];
 367         txctl.txq = &sc->tx.txq[qnum];
 368
 369         ath9k_ps_wakeup(sc);
 370         ar9003_paprd_init_table(ah);
 371         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 372                 if (!(common->tx_chainmask & BIT(chain)))
 373                         continue;
 374
 375                 chain_ok = 0;
 376                 memset(tx_info, 0, sizeof(*tx_info));
 377                 tx_info->band = band;
 378
 379                 for (i = 0; i < 4; i++) {
 380                         tx_info->control.rates[i].idx = sband->n_bitrates - 1;
 381                         tx_info->control.rates[i].count = 6;
 382                 }
 383
 384                 init_completion(&sc->paprd_complete);
 385                 ar9003_paprd_setup_gain_table(ah, chain);
 386                 txctl.paprd = BIT(chain);
 387                 if (ath_tx_start(hw, skb, &txctl) != 0)
 388                         break;
 389
 390                 time_left = wait_for_completion_timeout(&sc->paprd_complete,
 391                                 msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
 392                 if (!time_left) {
 393                         ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
 394                                   "Timeout waiting for paprd training on "
 395                                   "TX chain %d\n",
 396                                   chain);
 397                         goto fail_paprd;
 398                 }
 399
 400                 if (!ar9003_paprd_is_done(ah))
 401                         break;
 402
 403                 if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
 404                         break;
 405
 406                 chain_ok = 1;
 407         }
 408         kfree_skb(skb);
 409
 410         if (chain_ok) {
 411                 caldata->paprd_done = true;
 412                 ath_paprd_activate(sc);
 413         }
 414
 415 fail_paprd:
 416         ath9k_ps_restore(sc);
 417 }
 418
 419 /*
 420  *  This routine performs the periodic noise floor calibration function
 421  *  that is used to adjust and optimize the chip performance.  This
 422  *  takes environmental changes (location, temperature) into account.
 423  *  When the task is complete, it reschedules itself depending on the
 424  *  appropriate interval that was calculated.
 425  */
 426 void ath_ani_calibrate(unsigned long data)
 427 {
 428         struct ath_softc *sc = (struct ath_softc *)data;
 429         struct ath_hw *ah = sc->sc_ah;
 430         struct ath_common *common = ath9k_hw_common(ah);
 431         bool longcal = false;
 432         bool shortcal = false;
 433         bool aniflag = false;
 434         unsigned int timestamp = jiffies_to_msecs(jiffies);
 435         u32 cal_interval, short_cal_interval, long_cal_interval;
 436         unsigned long flags;
 437
 438         if (ah->caldata && ah->caldata->nfcal_interference)
 439                 long_cal_interval = ATH_LONG_CALINTERVAL_INT;
 440         else
 441                 long_cal_interval = ATH_LONG_CALINTERVAL;
 442
 443         short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
 444                 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
 445
 446         /* Only calibrate if awake */
 447         if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
 448                 goto set_timer;
 449
 450         ath9k_ps_wakeup(sc);
 451
 452         /* Long calibration runs independently of short calibration. */
 453         if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
 454                 longcal = true;
 455                 ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 456                 common->ani.longcal_timer = timestamp;
 457         }
 458
 459         /* Short calibration applies only while caldone is false */
 460         if (!common->ani.caldone) {
 461                 if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
 462                         shortcal = true;
 463                         ath_print(common, ATH_DBG_ANI,
 464                                   "shortcal @%lu\n", jiffies);
 465                         common->ani.shortcal_timer = timestamp;
 466                         common->ani.resetcal_timer = timestamp;
 467                 }
 468         } else {
 469                 if ((timestamp - common->ani.resetcal_timer) >=
 470                     ATH_RESTART_CALINTERVAL) {
 471                         common->ani.caldone = ath9k_hw_reset_calvalid(ah);
 472                         if (common->ani.caldone)
 473                                 common->ani.resetcal_timer = timestamp;
 474                 }
 475         }
 476
 477         /* Verify whether we must check ANI */
 478         if ((timestamp - common->ani.checkani_timer) >=
 479              ah->config.ani_poll_interval) {
 480                 aniflag = true;
 481                 common->ani.checkani_timer = timestamp;
 482         }
 483
 484         /* Skip all processing if there's nothing to do. */
 485         if (longcal || shortcal || aniflag) {
 486                 /* Call ANI routine if necessary */
 487                 if (aniflag) {
 488                         spin_lock_irqsave(&common->cc_lock, flags);
 489                         ath9k_hw_ani_monitor(ah, ah->curchan);
 490                         ath_update_survey_stats(sc);
 491                         spin_unlock_irqrestore(&common->cc_lock, flags);
 492                 }
 493
 494                 /* Perform calibration if necessary */
 495                 if (longcal || shortcal) {
 496                         common->ani.caldone =
 497                                 ath9k_hw_calibrate(ah,
 498                                                    ah->curchan,
 499                                                    common->rx_chainmask,
 500                                                    longcal);
 501                 }
 502         }
 503
 504         ath9k_ps_restore(sc);
 505
 506 set_timer:
 507         /*
 508         * Set timer interval based on previous results.
 509         * The interval must be the shortest necessary to satisfy ANI,
 510         * short calibration and long calibration.
 511         */
 512         cal_interval = ATH_LONG_CALINTERVAL;
 513         if (sc->sc_ah->config.enable_ani)
 514                 cal_interval = min(cal_interval,
 515                                    (u32)ah->config.ani_poll_interval);
 516         if (!common->ani.caldone)
 517                 cal_interval = min(cal_interval, (u32)short_cal_interval);
 518
 519         mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 520         if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
 521                 if (!ah->caldata->paprd_done)
 522                         ieee80211_queue_work(sc->hw, &sc->paprd_work);
 523                 else
 524                         ath_paprd_activate(sc);
 525         }
 526 }
 527
 528 /*
 529  * Update tx/rx chainmask. For legacy association,
 530  * hard code chainmask to 1x1, for 11n association, use
 531  * the chainmask configuration, for bt coexistence, use
 532  * the chainmask configuration even in legacy mode.
 533  */
 534 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 535 {
 536         struct ath_hw *ah = sc->sc_ah;
 537         struct ath_common *common = ath9k_hw_common(ah);
 538
 539         if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
 540             (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
 541                 common->tx_chainmask = ah->caps.tx_chainmask;
 542                 common->rx_chainmask = ah->caps.rx_chainmask;
 543         } else {
 544                 common->tx_chainmask = 1;
 545                 common->rx_chainmask = 1;
 546         }
 547
 548         ath_print(common, ATH_DBG_CONFIG,
 549                   "tx chmask: %d, rx chmask: %d\n",
 550                   common->tx_chainmask,
 551                   common->rx_chainmask);
 552 }
 553
 554 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 555 {
 556         struct ath_node *an;
 557
 558         an = (struct ath_node *)sta->drv_priv;
 559
 560         if (sc->sc_flags & SC_OP_TXAGGR) {
 561                 ath_tx_node_init(sc, an);
 562                 an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 563                                      sta->ht_cap.ampdu_factor);
 564                 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
 565                 an->last_rssi = ATH_RSSI_DUMMY_MARKER;
 566         }
 567 }
 568
 569 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 570 {
 571         struct ath_node *an = (struct ath_node *)sta->drv_priv;
 572
 573         if (sc->sc_flags & SC_OP_TXAGGR)
 574                 ath_tx_node_cleanup(sc, an);
 575 }
 576
 577 void ath_hw_check(struct work_struct *work)
 578 {
 579         struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
 580         int i;
 581
 582         ath9k_ps_wakeup(sc);
 583
 584         for (i = 0; i < 3; i++) {
 585                 if (ath9k_hw_check_alive(sc->sc_ah))
 586                         goto out;
 587
 588                 msleep(1);
 589         }
 590         ath_reset(sc, true);
 591
 592 out:
 593         ath9k_ps_restore(sc);
 594 }
 595
 596 void ath9k_tasklet(unsigned long data)
 597 {
 598         struct ath_softc *sc = (struct ath_softc *)data;
 599         struct ath_hw *ah = sc->sc_ah;
 600         struct ath_common *common = ath9k_hw_common(ah);
 601
 602         u32 status = sc->intrstatus;
 603         u32 rxmask;
 604
 605         ath9k_ps_wakeup(sc);
 606
 607         if (status & ATH9K_INT_FATAL) {
 608                 ath_reset(sc, true);
 609                 ath9k_ps_restore(sc);
 610                 return;
 611         }
 612
 613         if (!ath9k_hw_check_alive(ah))
 614                 ieee80211_queue_work(sc->hw, &sc->hw_check_work);
 615
 616         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 617                 rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
 618                           ATH9K_INT_RXORN);
 619         else
 620                 rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 621
 622         if (status & rxmask) {
 623                 spin_lock_bh(&sc->rx.pcu_lock);
 624
 625                 /* Check for high priority Rx first */
 626                 if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 627                     (status & ATH9K_INT_RXHP))
 628                         ath_rx_tasklet(sc, 0, true);
 629
 630                 ath_rx_tasklet(sc, 0, false);
 631                 spin_unlock_bh(&sc->rx.pcu_lock);
 632         }
 633
 634         if (status & ATH9K_INT_TX) {
 635                 if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 636                         ath_tx_edma_tasklet(sc);
 637                 else
 638                         ath_tx_tasklet(sc);
 639         }
 640
 641         if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
 642                 /*
 643                  * TSF sync does not look correct; remain awake to sync with
 644                  * the next Beacon.
 645                  */
 646                 ath_print(common, ATH_DBG_PS,
 647                           "TSFOOR - Sync with next Beacon\n");
 648                 sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
 649         }
 650
 651         if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 652                 if (status & ATH9K_INT_GENTIMER)
 653                         ath_gen_timer_isr(sc->sc_ah);
 654
 655         /* re-enable hardware interrupt */
 656         ath9k_hw_set_interrupts(ah, ah->imask);
 657         ath9k_ps_restore(sc);
 658 }
 659
 660 irqreturn_t ath_isr(int irq, void *dev)
 661 {
 662 #define SCHED_INTR (                            \
 663                 ATH9K_INT_FATAL |               \
 664                 ATH9K_INT_RXORN |               \
 665                 ATH9K_INT_RXEOL |               \
 666                 ATH9K_INT_RX |                  \
 667                 ATH9K_INT_RXLP |                \
 668                 ATH9K_INT_RXHP |                \
 669                 ATH9K_INT_TX |                  \
 670                 ATH9K_INT_BMISS |               \
 671                 ATH9K_INT_CST |                 \
 672                 ATH9K_INT_TSFOOR |              \
 673                 ATH9K_INT_GENTIMER)
 674
 675         struct ath_softc *sc = dev;
 676         struct ath_hw *ah = sc->sc_ah;
 677         struct ath_common *common = ath9k_hw_common(ah);
 678         enum ath9k_int status;
 679         bool sched = false;
 680
 681         /*
 682          * The hardware is not ready/present, don't
 683          * touch anything. Note this can happen early
 684          * on if the IRQ is shared.
 685          */
 686         if (sc->sc_flags & SC_OP_INVALID)
 687                 return IRQ_NONE;
 688
 689
 690         /* shared irq, not for us */
 691
 692         if (!ath9k_hw_intrpend(ah))
 693                 return IRQ_NONE;
 694
 695         /*
 696          * Figure out the reason(s) for the interrupt.  Note
 697          * that the hal returns a pseudo-ISR that may include
 698          * bits we haven't explicitly enabled so we mask the
 699          * value to insure we only process bits we requested.
 700          */
 701         ath9k_hw_getisr(ah, &status);   /* NB: clears ISR too */
 702         status &= ah->imask;    /* discard unasked-for bits */
 703
 704         /*
 705          * If there are no status bits set, then this interrupt was not
 706          * for me (should have been caught above).
 707          */
 708         if (!status)
 709                 return IRQ_NONE;
 710
 711         /* Cache the status */
 712         sc->intrstatus = status;
 713
 714         if (status & SCHED_INTR)
 715                 sched = true;
 716
 717         /*
 718          * If a FATAL or RXORN interrupt is received, we have to reset the
 719          * chip immediately.
 720          */
 721         if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
 722             !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
 723                 goto chip_reset;
 724
 725         if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 726             (status & ATH9K_INT_BB_WATCHDOG)) {
 727
 728                 spin_lock(&common->cc_lock);
 729                 ath_hw_cycle_counters_update(common);
 730                 ar9003_hw_bb_watchdog_dbg_info(ah);
 731                 spin_unlock(&common->cc_lock);
 732
 733                 goto chip_reset;
 734         }
 735
 736         if (status & ATH9K_INT_SWBA)
 737                 tasklet_schedule(&sc->bcon_tasklet);
 738
 739         if (status & ATH9K_INT_TXURN)
 740                 ath9k_hw_updatetxtriglevel(ah, true);
 741
 742         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
 743                 if (status & ATH9K_INT_RXEOL) {
 744                         ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 745                         ath9k_hw_set_interrupts(ah, ah->imask);
 746                 }
 747         }
 748
 749         if (status & ATH9K_INT_MIB) {
 750                 /*
 751                  * Disable interrupts until we service the MIB
 752                  * interrupt; otherwise it will continue to
 753                  * fire.
 754                  */
 755                 ath9k_hw_set_interrupts(ah, 0);
 756                 /*
 757                  * Let the hal handle the event. We assume
 758                  * it will clear whatever condition caused
 759                  * the interrupt.
 760                  */
 761                 spin_lock(&common->cc_lock);
 762                 ath9k_hw_proc_mib_event(ah);
 763                 spin_unlock(&common->cc_lock);
 764                 ath9k_hw_set_interrupts(ah, ah->imask);
 765         }
 766
 767         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 768                 if (status & ATH9K_INT_TIM_TIMER) {
 769                         /* Clear RxAbort bit so that we can
 770                          * receive frames */
 771                         ath9k_setpower(sc, ATH9K_PM_AWAKE);
 772                         ath9k_hw_setrxabort(sc->sc_ah, 0);
 773                         sc->ps_flags |= PS_WAIT_FOR_BEACON;
 774                 }
 775
 776 chip_reset:
 777
 778         ath_debug_stat_interrupt(sc, status);
 779
 780         if (sched) {
 781                 /* turn off every interrupt except SWBA */
 782                 ath9k_hw_set_interrupts(ah, (ah->imask & ATH9K_INT_SWBA));
 783                 tasklet_schedule(&sc->intr_tq);
 784         }
 785
 786         return IRQ_HANDLED;
 787
 788 #undef SCHED_INTR
 789 }
 790
 791 static u32 ath_get_extchanmode(struct ath_softc *sc,
 792                                struct ieee80211_channel *chan,
 793                                enum nl80211_channel_type channel_type)
 794 {
 795         u32 chanmode = 0;
 796
 797         switch (chan->band) {
 798         case IEEE80211_BAND_2GHZ:
 799                 switch(channel_type) {
 800                 case NL80211_CHAN_NO_HT:
 801                 case NL80211_CHAN_HT20:
 802                         chanmode = CHANNEL_G_HT20;
 803                         break;
 804                 case NL80211_CHAN_HT40PLUS:
 805                         chanmode = CHANNEL_G_HT40PLUS;
 806                         break;
 807                 case NL80211_CHAN_HT40MINUS:
 808                         chanmode = CHANNEL_G_HT40MINUS;
 809                         break;
 810                 }
 811                 break;
 812         case IEEE80211_BAND_5GHZ:
 813                 switch(channel_type) {
 814                 case NL80211_CHAN_NO_HT:
 815                 case NL80211_CHAN_HT20:
 816                         chanmode = CHANNEL_A_HT20;
 817                         break;
 818                 case NL80211_CHAN_HT40PLUS:
 819                         chanmode = CHANNEL_A_HT40PLUS;
 820                         break;
 821                 case NL80211_CHAN_HT40MINUS:
 822                         chanmode = CHANNEL_A_HT40MINUS;
 823                         break;
 824                 }
 825                 break;
 826         default:
 827                 break;
 828         }
 829
 830         return chanmode;
 831 }
 832
 833 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 834                                  struct ieee80211_vif *vif,
 835                                  struct ieee80211_bss_conf *bss_conf)
 836 {
 837         struct ath_hw *ah = sc->sc_ah;
 838         struct ath_common *common = ath9k_hw_common(ah);
 839
 840         if (bss_conf->assoc) {
 841                 ath_print(common, ATH_DBG_CONFIG,
 842                           "Bss Info ASSOC %d, bssid: %pM\n",
 843                            bss_conf->aid, common->curbssid);
 844
 845                 /* New association, store aid */
 846                 common->curaid = bss_conf->aid;
 847                 ath9k_hw_write_associd(ah);
 848
 849                 /*
 850                  * Request a re-configuration of Beacon related timers
 851                  * on the receipt of the first Beacon frame (i.e.,
 852                  * after time sync with the AP).
 853                  */
 854                 sc->ps_flags |= PS_BEACON_SYNC;
 855
 856                 /* Configure the beacon */
 857                 ath_beacon_config(sc, vif);
 858
 859                 /* Reset rssi stats */
 860                 sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 861
 862                 sc->sc_flags |= SC_OP_ANI_RUN;
 863                 ath_start_ani(common);
 864         } else {
 865                 ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 866                 common->curaid = 0;
 867                 /* Stop ANI */
 868                 sc->sc_flags &= ~SC_OP_ANI_RUN;
 869                 del_timer_sync(&common->ani.timer);
 870         }
 871 }
 872
 873 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 874 {
 875         struct ath_hw *ah = sc->sc_ah;
 876         struct ath_common *common = ath9k_hw_common(ah);
 877         struct ieee80211_channel *channel = hw->conf.channel;
 878         int r;
 879
 880         ath9k_ps_wakeup(sc);
 881         ath9k_hw_configpcipowersave(ah, 0, 0);
 882
 883         if (!ah->curchan)
 884                 ah->curchan = ath_get_curchannel(sc, sc->hw);
 885
 886         spin_lock_bh(&sc->rx.pcu_lock);
 887         spin_lock_bh(&sc->sc_resetlock);
 888         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 889         if (r) {
 890                 ath_print(common, ATH_DBG_FATAL,
 891                           "Unable to reset channel (%u MHz), "
 892                           "reset status %d\n",
 893                           channel->center_freq, r);
 894         }
 895         spin_unlock_bh(&sc->sc_resetlock);
 896
 897         ath_update_txpow(sc);
 898         if (ath_startrecv(sc) != 0) {
 899                 ath_print(common, ATH_DBG_FATAL,
 900                           "Unable to restart recv logic\n");
 901                 spin_unlock_bh(&sc->rx.pcu_lock);
 902                 return;
 903         }
 904         spin_unlock_bh(&sc->rx.pcu_lock);
 905
 906         if (sc->sc_flags & SC_OP_BEACONS)
 907                 ath_beacon_config(sc, NULL);    /* restart beacons */
 908
 909         /* Re-Enable  interrupts */
 910         ath9k_hw_set_interrupts(ah, ah->imask);
 911
 912         /* Enable LED */
 913         ath9k_hw_cfg_output(ah, ah->led_pin,
 914                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 915         ath9k_hw_set_gpio(ah, ah->led_pin, 0);
 916
 917         ieee80211_wake_queues(hw);
 918         ath9k_ps_restore(sc);
 919 }
 920
 921 void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 922 {
 923         struct ath_hw *ah = sc->sc_ah;
 924         struct ieee80211_channel *channel = hw->conf.channel;
 925         int r;
 926
 927         ath9k_ps_wakeup(sc);
 928         ieee80211_stop_queues(hw);
 929
 930         /*
 931          * Keep the LED on when the radio is disabled
 932          * during idle unassociated state.
 933          */
 934         if (!sc->ps_idle) {
 935                 ath9k_hw_set_gpio(ah, ah->led_pin, 1);
 936                 ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
 937         }
 938
 939         /* Disable interrupts */
 940         ath9k_hw_set_interrupts(ah, 0);
 941
 942         ath_drain_all_txq(sc, false);   /* clear pending tx frames */
 943
 944         spin_lock_bh(&sc->rx.pcu_lock);
 945
 946         ath_stoprecv(sc);               /* turn off frame recv */
 947         ath_flushrecv(sc);              /* flush recv queue */
 948
 949         if (!ah->curchan)
 950                 ah->curchan = ath_get_curchannel(sc, hw);
 951
 952         spin_lock_bh(&sc->sc_resetlock);
 953         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 954         if (r) {
 955                 ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
 956                           "Unable to reset channel (%u MHz), "
 957                           "reset status %d\n",
 958                           channel->center_freq, r);
 959         }
 960         spin_unlock_bh(&sc->sc_resetlock);
 961
 962         ath9k_hw_phy_disable(ah);
 963
 964         spin_unlock_bh(&sc->rx.pcu_lock);
 965
 966         ath9k_hw_configpcipowersave(ah, 1, 1);
 967         ath9k_ps_restore(sc);
 968         ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 969 }
 970
 971 int ath_reset(struct ath_softc *sc, bool retry_tx)
 972 {
 973         struct ath_hw *ah = sc->sc_ah;
 974         struct ath_common *common = ath9k_hw_common(ah);
 975         struct ieee80211_hw *hw = sc->hw;
 976         int r;
 977
 978         /* Stop ANI */
 979         del_timer_sync(&common->ani.timer);
 980
 981         ieee80211_stop_queues(hw);
 982
 983         ath9k_hw_set_interrupts(ah, 0);
 984         ath_drain_all_txq(sc, retry_tx);
 985
 986         spin_lock_bh(&sc->rx.pcu_lock);
 987
 988         ath_stoprecv(sc);
 989         ath_flushrecv(sc);
 990
 991         spin_lock_bh(&sc->sc_resetlock);
 992         r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 993         if (r)
 994                 ath_print(common, ATH_DBG_FATAL,
 995                           "Unable to reset hardware; reset status %d\n", r);
 996         spin_unlock_bh(&sc->sc_resetlock);
 997
 998         if (ath_startrecv(sc) != 0)
 999                 ath_print(common, ATH_DBG_FATAL,
1000                           "Unable to start recv logic\n");
1001
1002         spin_unlock_bh(&sc->rx.pcu_lock);
1003
1004         /*
1005          * We may be doing a reset in response to a request
1006          * that changes the channel so update any state that
1007          * might change as a result.
1008          */
1009         ath_update_txpow(sc);
1010
1011         if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
1012                 ath_beacon_config(sc, NULL);    /* restart beacons */
1013
1014         ath9k_hw_set_interrupts(ah, ah->imask);
1015
1016         if (retry_tx) {
1017                 int i;
1018                 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1019                         if (ATH_TXQ_SETUP(sc, i)) {
1020                                 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1021                                 ath_txq_schedule(sc, &sc->tx.txq[i]);
1022                                 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1023                         }
1024                 }
1025         }
1026
1027         ieee80211_wake_queues(hw);
1028
1029         /* Start ANI */
1030         ath_start_ani(common);
1031
1032         return r;
1033 }
1034
1035 static int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
1036 {
1037         int qnum;
1038
1039         switch (queue) {
1040         case 0:
1041                 qnum = sc->tx.hwq_map[WME_AC_VO];
1042                 break;
1043         case 1:
1044                 qnum = sc->tx.hwq_map[WME_AC_VI];
1045                 break;
1046         case 2:
1047                 qnum = sc->tx.hwq_map[WME_AC_BE];
1048                 break;
1049         case 3:
1050                 qnum = sc->tx.hwq_map[WME_AC_BK];
1051                 break;
1052         default:
1053                 qnum = sc->tx.hwq_map[WME_AC_BE];
1054                 break;
1055         }
1056
1057         return qnum;
1058 }
1059
1060 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
1061 {
1062         int qnum;
1063
1064         switch (queue) {
1065         case WME_AC_VO:
1066                 qnum = 0;
1067                 break;
1068         case WME_AC_VI:
1069                 qnum = 1;
1070                 break;
1071         case WME_AC_BE:
1072                 qnum = 2;
1073                 break;
1074         case WME_AC_BK:
1075                 qnum = 3;
1076                 break;
1077         default:
1078                 qnum = -1;
1079                 break;
1080         }
1081
1082         return qnum;
1083 }
1084
1085 /* XXX: Remove me once we don't depend on ath9k_channel for all
1086  * this redundant data */
1087 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1088                            struct ath9k_channel *ichan)
1089 {
1090         struct ieee80211_channel *chan = hw->conf.channel;
1091         struct ieee80211_conf *conf = &hw->conf;
1092
1093         ichan->channel = chan->center_freq;
1094         ichan->chan = chan;
1095
1096         if (chan->band == IEEE80211_BAND_2GHZ) {
1097                 ichan->chanmode = CHANNEL_G;
1098                 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
1099         } else {
1100                 ichan->chanmode = CHANNEL_A;
1101                 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1102         }
1103
1104         if (conf_is_ht(conf))
1105                 ichan->chanmode = ath_get_extchanmode(sc, chan,
1106                                             conf->channel_type);
1107 }
1108
1109 /**********************/
1110 /* mac80211 callbacks */
1111 /**********************/
1112
1113 static int ath9k_start(struct ieee80211_hw *hw)
1114 {
1115         struct ath_wiphy *aphy = hw->priv;
1116         struct ath_softc *sc = aphy->sc;
1117         struct ath_hw *ah = sc->sc_ah;
1118         struct ath_common *common = ath9k_hw_common(ah);
1119         struct ieee80211_channel *curchan = hw->conf.channel;
1120         struct ath9k_channel *init_channel;
1121         int r;
1122
1123         ath_print(common, ATH_DBG_CONFIG,
1124                   "Starting driver with initial channel: %d MHz\n",
1125                   curchan->center_freq);
1126
1127         mutex_lock(&sc->mutex);
1128
1129         if (ath9k_wiphy_started(sc)) {
1130                 if (sc->chan_idx == curchan->hw_value) {
1131                         /*
1132                          * Already on the operational channel, the new wiphy
1133                          * can be marked active.
1134                          */
1135                         aphy->state = ATH_WIPHY_ACTIVE;
1136                         ieee80211_wake_queues(hw);
1137                 } else {
1138                         /*
1139                          * Another wiphy is on another channel, start the new
1140                          * wiphy in paused state.
1141                          */
1142                         aphy->state = ATH_WIPHY_PAUSED;
1143                         ieee80211_stop_queues(hw);
1144                 }
1145                 mutex_unlock(&sc->mutex);
1146                 return 0;
1147         }
1148         aphy->state = ATH_WIPHY_ACTIVE;
1149
1150         /* setup initial channel */
1151
1152         sc->chan_idx = curchan->hw_value;
1153
1154         init_channel = ath_get_curchannel(sc, hw);
1155
1156         /* Reset SERDES registers */
1157         ath9k_hw_configpcipowersave(ah, 0, 0);
1158
1159         /*
1160          * The basic interface to setting the hardware in a good
1161          * state is ``reset''.  On return the hardware is known to
1162          * be powered up and with interrupts disabled.  This must
1163          * be followed by initialization of the appropriate bits
1164          * and then setup of the interrupt mask.
1165          */
1166         spin_lock_bh(&sc->rx.pcu_lock);
1167         spin_lock_bh(&sc->sc_resetlock);
1168         r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
1169         if (r) {
1170                 ath_print(common, ATH_DBG_FATAL,
1171                           "Unable to reset hardware; reset status %d "
1172                           "(freq %u MHz)\n", r,
1173                           curchan->center_freq);
1174                 spin_unlock_bh(&sc->sc_resetlock);
1175                 spin_unlock_bh(&sc->rx.pcu_lock);
1176                 goto mutex_unlock;
1177         }
1178         spin_unlock_bh(&sc->sc_resetlock);
1179
1180         /*
1181          * This is needed only to setup initial state
1182          * but it's best done after a reset.
1183          */
1184         ath_update_txpow(sc);
1185
1186         /*
1187          * Setup the hardware after reset:
1188          * The receive engine is set going.
1189          * Frame transmit is handled entirely
1190          * in the frame output path; there's nothing to do
1191          * here except setup the interrupt mask.
1192          */
1193         if (ath_startrecv(sc) != 0) {
1194                 ath_print(common, ATH_DBG_FATAL,
1195                           "Unable to start recv logic\n");
1196                 r = -EIO;
1197                 spin_unlock_bh(&sc->rx.pcu_lock);
1198                 goto mutex_unlock;
1199         }
1200         spin_unlock_bh(&sc->rx.pcu_lock);
1201
1202         /* Setup our intr mask. */
1203         ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
1204                     ATH9K_INT_RXORN | ATH9K_INT_FATAL |
1205                     ATH9K_INT_GLOBAL;
1206
1207         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
1208                 ah->imask |= ATH9K_INT_RXHP |
1209                              ATH9K_INT_RXLP |
1210                              ATH9K_INT_BB_WATCHDOG;
1211         else
1212                 ah->imask |= ATH9K_INT_RX;
1213
1214         ah->imask |= ATH9K_INT_GTT;
1215
1216         if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
1217                 ah->imask |= ATH9K_INT_CST;
1218
1219         sc->sc_flags &= ~SC_OP_INVALID;
1220
1221         /* Disable BMISS interrupt when we're not associated */
1222         ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
1223         ath9k_hw_set_interrupts(ah, ah->imask);
1224
1225         ieee80211_wake_queues(hw);
1226
1227         ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
1228
1229         if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
1230             !ah->btcoex_hw.enabled) {
1231                 ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
1232                                            AR_STOMP_LOW_WLAN_WGHT);
1233                 ath9k_hw_btcoex_enable(ah);
1234
1235                 if (common->bus_ops->bt_coex_prep)
1236                         common->bus_ops->bt_coex_prep(common);
1237                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1238                         ath9k_btcoex_timer_resume(sc);
1239         }
1240
1241 mutex_unlock:
1242         mutex_unlock(&sc->mutex);
1243
1244         return r;
1245 }
1246
1247 static int ath9k_tx(struct ieee80211_hw *hw,
1248                     struct sk_buff *skb)
1249 {
1250         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1251         struct ath_wiphy *aphy = hw->priv;
1252         struct ath_softc *sc = aphy->sc;
1253         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1254         struct ath_tx_control txctl;
1255         int padpos, padsize;
1256         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1257         int qnum;
1258
1259         if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
1260                 ath_print(common, ATH_DBG_XMIT,
1261                           "ath9k: %s: TX in unexpected wiphy state "
1262                           "%d\n", wiphy_name(hw->wiphy), aphy->state);
1263                 goto exit;
1264         }
1265
1266         if (sc->ps_enabled) {
1267                 /*
1268                  * mac80211 does not set PM field for normal data frames, so we
1269                  * need to update that based on the current PS mode.
1270                  */
1271                 if (ieee80211_is_data(hdr->frame_control) &&
1272                     !ieee80211_is_nullfunc(hdr->frame_control) &&
1273                     !ieee80211_has_pm(hdr->frame_control)) {
1274                         ath_print(common, ATH_DBG_PS, "Add PM=1 for a TX frame "
1275                                   "while in PS mode\n");
1276                         hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1277                 }
1278         }
1279
1280         if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
1281                 /*
1282                  * We are using PS-Poll and mac80211 can request TX while in
1283                  * power save mode. Need to wake up hardware for the TX to be
1284                  * completed and if needed, also for RX of buffered frames.
1285                  */
1286                 ath9k_ps_wakeup(sc);
1287                 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
1288                         ath9k_hw_setrxabort(sc->sc_ah, 0);
1289                 if (ieee80211_is_pspoll(hdr->frame_control)) {
1290                         ath_print(common, ATH_DBG_PS,
1291                                   "Sending PS-Poll to pick a buffered frame\n");
1292                         sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
1293                 } else {
1294                         ath_print(common, ATH_DBG_PS,
1295                                   "Wake up to complete TX\n");
1296                         sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
1297                 }
1298                 /*
1299                  * The actual restore operation will happen only after
1300                  * the sc_flags bit is cleared. We are just dropping
1301                  * the ps_usecount here.
1302                  */
1303                 ath9k_ps_restore(sc);
1304         }
1305
1306         memset(&txctl, 0, sizeof(struct ath_tx_control));
1307
1308         /*
1309          * As a temporary workaround, assign seq# here; this will likely need
1310          * to be cleaned up to work better with Beacon transmission and virtual
1311          * BSSes.
1312          */
1313         if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
1314                 if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
1315                         sc->tx.seq_no += 0x10;
1316                 hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
1317                 hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
1318         }
1319
1320         /* Add the padding after the header if this is not already done */
1321         padpos = ath9k_cmn_padpos(hdr->frame_control);
1322         padsize = padpos & 3;
1323         if (padsize && skb->len>padpos) {
1324                 if (skb_headroom(skb) < padsize)
1325                         return -1;
1326                 skb_push(skb, padsize);
1327                 memmove(skb->data, skb->data + padsize, padpos);
1328         }
1329
1330         qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
1331         txctl.txq = &sc->tx.txq[qnum];
1332
1333         ath_print(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
1334
1335         if (ath_tx_start(hw, skb, &txctl) != 0) {
1336                 ath_print(common, ATH_DBG_XMIT, "TX failed\n");
1337                 goto exit;
1338         }
1339
1340         return 0;
1341 exit:
1342         dev_kfree_skb_any(skb);
1343         return 0;
1344 }
1345
1346 static void ath9k_stop(struct ieee80211_hw *hw)
1347 {
1348         struct ath_wiphy *aphy = hw->priv;
1349         struct ath_softc *sc = aphy->sc;
1350         struct ath_hw *ah = sc->sc_ah;
1351         struct ath_common *common = ath9k_hw_common(ah);
1352         int i;
1353
1354         mutex_lock(&sc->mutex);
1355
1356         aphy->state = ATH_WIPHY_INACTIVE;
1357
1358         if (led_blink)
1359                 cancel_delayed_work_sync(&sc->ath_led_blink_work);
1360
1361         cancel_delayed_work_sync(&sc->tx_complete_work);
1362         cancel_work_sync(&sc->paprd_work);
1363         cancel_work_sync(&sc->hw_check_work);
1364
1365         for (i = 0; i < sc->num_sec_wiphy; i++) {
1366                 if (sc->sec_wiphy[i])
1367                         break;
1368         }
1369
1370         if (i == sc->num_sec_wiphy) {
1371                 cancel_delayed_work_sync(&sc->wiphy_work);
1372                 cancel_work_sync(&sc->chan_work);
1373         }
1374
1375         if (sc->sc_flags & SC_OP_INVALID) {
1376                 ath_print(common, ATH_DBG_ANY, "Device not present\n");
1377                 mutex_unlock(&sc->mutex);
1378                 return;
1379         }
1380
1381         if (ath9k_wiphy_started(sc)) {
1382                 mutex_unlock(&sc->mutex);
1383                 return; /* another wiphy still in use */
1384         }
1385
1386         /* Ensure HW is awake when we try to shut it down. */
1387         ath9k_ps_wakeup(sc);
1388
1389         if (ah->btcoex_hw.enabled) {
1390                 ath9k_hw_btcoex_disable(ah);
1391                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1392                         ath9k_btcoex_timer_pause(sc);
1393         }
1394
1395         /* make sure h/w will not generate any interrupt
1396          * before setting the invalid flag. */
1397         ath9k_hw_set_interrupts(ah, 0);
1398
1399         spin_lock_bh(&sc->rx.pcu_lock);
1400         if (!(sc->sc_flags & SC_OP_INVALID)) {
1401                 ath_drain_all_txq(sc, false);
1402                 ath_stoprecv(sc);
1403                 ath9k_hw_phy_disable(ah);
1404         } else
1405                 sc->rx.rxlink = NULL;
1406         spin_unlock_bh(&sc->rx.pcu_lock);
1407
1408         /* disable HAL and put h/w to sleep */
1409         ath9k_hw_disable(ah);
1410         ath9k_hw_configpcipowersave(ah, 1, 1);
1411         ath9k_ps_restore(sc);
1412
1413         /* Finally, put the chip in FULL SLEEP mode */
1414         ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
1415
1416         sc->sc_flags |= SC_OP_INVALID;
1417
1418         mutex_unlock(&sc->mutex);
1419
1420         ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
1421 }
1422
1423 static int ath9k_add_interface(struct ieee80211_hw *hw,
1424                                struct ieee80211_vif *vif)
1425 {
1426         struct ath_wiphy *aphy = hw->priv;
1427         struct ath_softc *sc = aphy->sc;
1428         struct ath_hw *ah = sc->sc_ah;
1429         struct ath_common *common = ath9k_hw_common(ah);
1430         struct ath_vif *avp = (void *)vif->drv_priv;
1431         enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
1432         int ret = 0;
1433
1434         mutex_lock(&sc->mutex);
1435
1436         switch (vif->type) {
1437         case NL80211_IFTYPE_STATION:
1438                 ic_opmode = NL80211_IFTYPE_STATION;
1439                 break;
1440         case NL80211_IFTYPE_WDS:
1441                 ic_opmode = NL80211_IFTYPE_WDS;
1442                 break;
1443         case NL80211_IFTYPE_ADHOC:
1444         case NL80211_IFTYPE_AP:
1445         case NL80211_IFTYPE_MESH_POINT:
1446                 if (sc->nbcnvifs >= ATH_BCBUF) {
1447                         ret = -ENOBUFS;
1448                         goto out;
1449                 }
1450                 ic_opmode = vif->type;
1451                 break;
1452         default:
1453                 ath_print(common, ATH_DBG_FATAL,
1454                         "Interface type %d not yet supported\n", vif->type);
1455                 ret = -EOPNOTSUPP;
1456                 goto out;
1457         }
1458
1459         ath_print(common, ATH_DBG_CONFIG,
1460                   "Attach a VIF of type: %d\n", ic_opmode);
1461
1462         /* Set the VIF opmode */
1463         avp->av_opmode = ic_opmode;
1464         avp->av_bslot = -1;
1465
1466         sc->nvifs++;
1467
1468         ath9k_set_bssid_mask(hw, vif);
1469
1470         if (sc->nvifs > 1)
1471                 goto out; /* skip global settings for secondary vif */
1472
1473         if (ic_opmode == NL80211_IFTYPE_AP) {
1474                 ath9k_hw_set_tsfadjust(ah, 1);
1475                 sc->sc_flags |= SC_OP_TSF_RESET;
1476         }
1477
1478         /* Set the device opmode */
1479         ah->opmode = ic_opmode;
1480
1481         /*
1482          * Enable MIB interrupts when there are hardware phy counters.
1483          * Note we only do this (at the moment) for station mode.
1484          */
1485         if ((vif->type == NL80211_IFTYPE_STATION) ||
1486             (vif->type == NL80211_IFTYPE_ADHOC) ||
1487             (vif->type == NL80211_IFTYPE_MESH_POINT)) {
1488                 if (ah->config.enable_ani)
1489                         ah->imask |= ATH9K_INT_MIB;
1490                 ah->imask |= ATH9K_INT_TSFOOR;
1491         }
1492
1493         ath9k_hw_set_interrupts(ah, ah->imask);
1494
1495         if (vif->type == NL80211_IFTYPE_AP    ||
1496             vif->type == NL80211_IFTYPE_ADHOC ||
1497             vif->type == NL80211_IFTYPE_MONITOR) {
1498                 sc->sc_flags |= SC_OP_ANI_RUN;
1499                 ath_start_ani(common);
1500         }
1501
1502 out:
1503         mutex_unlock(&sc->mutex);
1504         return ret;
1505 }
1506
1507 static void ath9k_remove_interface(struct ieee80211_hw *hw,
1508                                    struct ieee80211_vif *vif)
1509 {
1510         struct ath_wiphy *aphy = hw->priv;
1511         struct ath_softc *sc = aphy->sc;
1512         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1513         struct ath_vif *avp = (void *)vif->drv_priv;
1514         int i;
1515
1516         ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
1517
1518         mutex_lock(&sc->mutex);
1519
1520         /* Stop ANI */
1521         sc->sc_flags &= ~SC_OP_ANI_RUN;
1522         del_timer_sync(&common->ani.timer);
1523
1524         /* Reclaim beacon resources */
1525         if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
1526             (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
1527             (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
1528                 ath9k_ps_wakeup(sc);
1529                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1530                 ath9k_ps_restore(sc);
1531         }
1532
1533         ath_beacon_return(sc, avp);
1534         sc->sc_flags &= ~SC_OP_BEACONS;
1535
1536         for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
1537                 if (sc->beacon.bslot[i] == vif) {
1538                         printk(KERN_DEBUG "%s: vif had allocated beacon "
1539                                "slot\n", __func__);
1540                         sc->beacon.bslot[i] = NULL;
1541                         sc->beacon.bslot_aphy[i] = NULL;
1542                 }
1543         }
1544
1545         sc->nvifs--;
1546
1547         mutex_unlock(&sc->mutex);
1548 }
1549
1550 static void ath9k_enable_ps(struct ath_softc *sc)
1551 {
1552         struct ath_hw *ah = sc->sc_ah;
1553
1554         sc->ps_enabled = true;
1555         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1556                 if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
1557                         ah->imask |= ATH9K_INT_TIM_TIMER;
1558                         ath9k_hw_set_interrupts(ah, ah->imask);
1559                 }
1560                 ath9k_hw_setrxabort(ah, 1);
1561         }
1562 }
1563
1564 static void ath9k_disable_ps(struct ath_softc *sc)
1565 {
1566         struct ath_hw *ah = sc->sc_ah;
1567
1568         sc->ps_enabled = false;
1569         ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
1570         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1571                 ath9k_hw_setrxabort(ah, 0);
1572                 sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
1573                                   PS_WAIT_FOR_CAB |
1574                                   PS_WAIT_FOR_PSPOLL_DATA |
1575                                   PS_WAIT_FOR_TX_ACK);
1576                 if (ah->imask & ATH9K_INT_TIM_TIMER) {
1577                         ah->imask &= ~ATH9K_INT_TIM_TIMER;
1578                         ath9k_hw_set_interrupts(ah, ah->imask);
1579                 }
1580         }
1581
1582 }
1583
1584 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
1585 {
1586         struct ath_wiphy *aphy = hw->priv;
1587         struct ath_softc *sc = aphy->sc;
1588         struct ath_hw *ah = sc->sc_ah;
1589         struct ath_common *common = ath9k_hw_common(ah);
1590         struct ieee80211_conf *conf = &hw->conf;
1591         bool disable_radio;
1592
1593         mutex_lock(&sc->mutex);
1594
1595         /*
1596          * Leave this as the first check because we need to turn on the
1597          * radio if it was disabled before prior to processing the rest
1598          * of the changes. Likewise we must only disable the radio towards
1599          * the end.
1600          */
1601         if (changed & IEEE80211_CONF_CHANGE_IDLE) {
1602                 bool enable_radio;
1603                 bool all_wiphys_idle;
1604                 bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
1605
1606                 spin_lock_bh(&sc->wiphy_lock);
1607                 all_wiphys_idle =  ath9k_all_wiphys_idle(sc);
1608                 ath9k_set_wiphy_idle(aphy, idle);
1609
1610                 enable_radio = (!idle && all_wiphys_idle);
1611
1612                 /*
1613                  * After we unlock here its possible another wiphy
1614                  * can be re-renabled so to account for that we will
1615                  * only disable the radio toward the end of this routine
1616                  * if by then all wiphys are still idle.
1617                  */
1618                 spin_unlock_bh(&sc->wiphy_lock);
1619
1620                 if (enable_radio) {
1621                         sc->ps_idle = false;
1622                         ath_radio_enable(sc, hw);
1623                         ath_print(common, ATH_DBG_CONFIG,
1624                                   "not-idle: enabling radio\n");
1625                 }
1626         }
1627
1628         /*
1629          * We just prepare to enable PS. We have to wait until our AP has
1630          * ACK'd our null data frame to disable RX otherwise we'll ignore
1631          * those ACKs and end up retransmitting the same null data frames.
1632          * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
1633          */
1634         if (changed & IEEE80211_CONF_CHANGE_PS) {
1635                 unsigned long flags;
1636                 spin_lock_irqsave(&sc->sc_pm_lock, flags);
1637                 if (conf->flags & IEEE80211_CONF_PS)
1638                         ath9k_enable_ps(sc);
1639                 else
1640                         ath9k_disable_ps(sc);
1641                 spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
1642         }
1643
1644         if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
1645                 if (conf->flags & IEEE80211_CONF_MONITOR) {
1646                         ath_print(common, ATH_DBG_CONFIG,
1647                                   "HW opmode set to Monitor mode\n");
1648                         sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
1649                 }
1650         }
1651
1652         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
1653                 struct ieee80211_channel *curchan = hw->conf.channel;
1654                 int pos = curchan->hw_value;
1655                 int old_pos = -1;
1656                 unsigned long flags;
1657
1658                 if (ah->curchan)
1659                         old_pos = ah->curchan - &ah->channels[0];
1660
1661                 aphy->chan_idx = pos;
1662                 aphy->chan_is_ht = conf_is_ht(conf);
1663                 if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
1664                         sc->sc_flags |= SC_OP_OFFCHANNEL;
1665                 else
1666                         sc->sc_flags &= ~SC_OP_OFFCHANNEL;
1667
1668                 if (aphy->state == ATH_WIPHY_SCAN ||
1669                     aphy->state == ATH_WIPHY_ACTIVE)
1670                         ath9k_wiphy_pause_all_forced(sc, aphy);
1671                 else {
1672                         /*
1673                          * Do not change operational channel based on a paused
1674                          * wiphy changes.
1675                          */
1676                         goto skip_chan_change;
1677                 }
1678
1679                 ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
1680                           curchan->center_freq);
1681
1682                 /* XXX: remove me eventualy */
1683                 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
1684
1685                 ath_update_chainmask(sc, conf_is_ht(conf));
1686
1687                 /* update survey stats for the old channel before switching */
1688                 spin_lock_irqsave(&common->cc_lock, flags);
1689                 ath_update_survey_stats(sc);
1690                 spin_unlock_irqrestore(&common->cc_lock, flags);
1691
1692                 /*
1693                  * If the operating channel changes, change the survey in-use flags
1694                  * along with it.
1695                  * Reset the survey data for the new channel, unless we're switching
1696                  * back to the operating channel from an off-channel operation.
1697                  */
1698                 if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
1699                     sc->cur_survey != &sc->survey[pos]) {
1700
1701                         if (sc->cur_survey)
1702                                 sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
1703
1704                         sc->cur_survey = &sc->survey[pos];
1705
1706                         memset(sc->cur_survey, 0, sizeof(struct survey_info));
1707                         sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
1708                 } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
1709                         memset(&sc->survey[pos], 0, sizeof(struct survey_info));
1710                 }
1711
1712                 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
1713                         ath_print(common, ATH_DBG_FATAL,
1714                                   "Unable to set channel\n");
1715                         mutex_unlock(&sc->mutex);
1716                         return -EINVAL;
1717                 }
1718
1719                 /*
1720                  * The most recent snapshot of channel->noisefloor for the old
1721                  * channel is only available after the hardware reset. Copy it to
1722                  * the survey stats now.
1723                  */
1724                 if (old_pos >= 0)
1725                         ath_update_survey_nf(sc, old_pos);
1726         }
1727
1728 skip_chan_change:
1729         if (changed & IEEE80211_CONF_CHANGE_POWER) {
1730                 sc->config.txpowlimit = 2 * conf->power_level;
1731                 ath_update_txpow(sc);
1732         }
1733
1734         spin_lock_bh(&sc->wiphy_lock);
1735         disable_radio = ath9k_all_wiphys_idle(sc);
1736         spin_unlock_bh(&sc->wiphy_lock);
1737
1738         if (disable_radio) {
1739                 ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
1740                 sc->ps_idle = true;
1741                 ath_radio_disable(sc, hw);
1742         }
1743
1744         mutex_unlock(&sc->mutex);
1745
1746         return 0;
1747 }
1748
1749 #define SUPPORTED_FILTERS                       \
1750         (FIF_PROMISC_IN_BSS |                   \
1751         FIF_ALLMULTI |                          \
1752         FIF_CONTROL |                           \
1753         FIF_PSPOLL |                            \
1754         FIF_OTHER_BSS |                         \
1755         FIF_BCN_PRBRESP_PROMISC |               \
1756         FIF_PROBE_REQ |                         \
1757         FIF_FCSFAIL)
1758
1759 /* FIXME: sc->sc_full_reset ? */
1760 static void ath9k_configure_filter(struct ieee80211_hw *hw,
1761                                    unsigned int changed_flags,
1762                                    unsigned int *total_flags,
1763                                    u64 multicast)
1764 {
1765         struct ath_wiphy *aphy = hw->priv;
1766         struct ath_softc *sc = aphy->sc;
1767         u32 rfilt;
1768
1769         changed_flags &= SUPPORTED_FILTERS;
1770         *total_flags &= SUPPORTED_FILTERS;
1771
1772         sc->rx.rxfilter = *total_flags;
1773         ath9k_ps_wakeup(sc);
1774         rfilt = ath_calcrxfilter(sc);
1775         ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
1776         ath9k_ps_restore(sc);
1777
1778         ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
1779                   "Set HW RX filter: 0x%x\n", rfilt);
1780 }
1781
1782 static int ath9k_sta_add(struct ieee80211_hw *hw,
1783                          struct ieee80211_vif *vif,
1784                          struct ieee80211_sta *sta)
1785 {
1786         struct ath_wiphy *aphy = hw->priv;
1787         struct ath_softc *sc = aphy->sc;
1788
1789         ath_node_attach(sc, sta);
1790
1791         return 0;
1792 }
1793
1794 static int ath9k_sta_remove(struct ieee80211_hw *hw,
1795                             struct ieee80211_vif *vif,
1796                             struct ieee80211_sta *sta)
1797 {
1798         struct ath_wiphy *aphy = hw->priv;
1799         struct ath_softc *sc = aphy->sc;
1800
1801         ath_node_detach(sc, sta);
1802
1803         return 0;
1804 }
1805
1806 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
1807                          const struct ieee80211_tx_queue_params *params)
1808 {
1809         struct ath_wiphy *aphy = hw->priv;
1810         struct ath_softc *sc = aphy->sc;
1811         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1812         struct ath9k_tx_queue_info qi;
1813         int ret = 0, qnum;
1814
1815         if (queue >= WME_NUM_AC)
1816                 return 0;
1817
1818         mutex_lock(&sc->mutex);
1819
1820         memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
1821
1822         qi.tqi_aifs = params->aifs;
1823         qi.tqi_cwmin = params->cw_min;
1824         qi.tqi_cwmax = params->cw_max;
1825         qi.tqi_burstTime = params->txop;
1826         qnum = ath_get_hal_qnum(queue, sc);
1827
1828         ath_print(common, ATH_DBG_CONFIG,
1829                   "Configure tx [queue/halq] [%d/%d],  "
1830                   "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
1831                   queue, qnum, params->aifs, params->cw_min,
1832                   params->cw_max, params->txop);
1833
1834         ret = ath_txq_update(sc, qnum, &qi);
1835         if (ret)
1836                 ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
1837
1838         if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
1839                 if ((qnum == sc->tx.hwq_map[WME_AC_BE]) && !ret)
1840                         ath_beaconq_config(sc);
1841
1842         mutex_unlock(&sc->mutex);
1843
1844         return ret;
1845 }
1846
1847 static int ath9k_set_key(struct ieee80211_hw *hw,
1848                          enum set_key_cmd cmd,
1849                          struct ieee80211_vif *vif,
1850                          struct ieee80211_sta *sta,
1851                          struct ieee80211_key_conf *key)
1852 {
1853         struct ath_wiphy *aphy = hw->priv;
1854         struct ath_softc *sc = aphy->sc;
1855         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1856         int ret = 0;
1857
1858         if (modparam_nohwcrypt)
1859                 return -ENOSPC;
1860
1861         mutex_lock(&sc->mutex);
1862         ath9k_ps_wakeup(sc);
1863         ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
1864
1865         switch (cmd) {
1866         case SET_KEY:
1867                 ret = ath_key_config(common, vif, sta, key);
1868                 if (ret >= 0) {
1869                         key->hw_key_idx = ret;
1870                         /* push IV and Michael MIC generation to stack */
1871                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
1872                         if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
1873                                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
1874                         if (sc->sc_ah->sw_mgmt_crypto &&
1875                             key->cipher == WLAN_CIPHER_SUITE_CCMP)
1876                                 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
1877                         ret = 0;
1878                 }
1879                 break;
1880         case DISABLE_KEY:
1881                 ath_key_delete(common, key);
1882                 break;
1883         default:
1884                 ret = -EINVAL;
1885         }
1886
1887         ath9k_ps_restore(sc);
1888         mutex_unlock(&sc->mutex);
1889
1890         return ret;
1891 }
1892
1893 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
1894                                    struct ieee80211_vif *vif,
1895                                    struct ieee80211_bss_conf *bss_conf,
1896                                    u32 changed)
1897 {
1898         struct ath_wiphy *aphy = hw->priv;
1899         struct ath_softc *sc = aphy->sc;
1900         struct ath_hw *ah = sc->sc_ah;
1901         struct ath_common *common = ath9k_hw_common(ah);
1902         struct ath_vif *avp = (void *)vif->drv_priv;
1903         int slottime;
1904         int error;
1905
1906         mutex_lock(&sc->mutex);
1907
1908         if (changed & BSS_CHANGED_BSSID) {
1909                 /* Set BSSID */
1910                 memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
1911                 memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
1912                 common->curaid = 0;
1913                 ath9k_hw_write_associd(ah);
1914
1915                 /* Set aggregation protection mode parameters */
1916                 sc->config.ath_aggr_prot = 0;
1917
1918                 /* Only legacy IBSS for now */
1919                 if (vif->type == NL80211_IFTYPE_ADHOC)
1920                         ath_update_chainmask(sc, 0);
1921
1922                 ath_print(common, ATH_DBG_CONFIG,
1923                           "BSSID: %pM aid: 0x%x\n",
1924                           common->curbssid, common->curaid);
1925
1926                 /* need to reconfigure the beacon */
1927                 sc->sc_flags &= ~SC_OP_BEACONS ;
1928         }
1929
1930         /* Enable transmission of beacons (AP, IBSS, MESH) */
1931         if ((changed & BSS_CHANGED_BEACON) ||
1932             ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
1933                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1934                 error = ath_beacon_alloc(aphy, vif);
1935                 if (!error)
1936                         ath_beacon_config(sc, vif);
1937         }
1938
1939         if (changed & BSS_CHANGED_ERP_SLOT) {
1940                 if (bss_conf->use_short_slot)
1941                         slottime = 9;
1942                 else
1943                         slottime = 20;
1944                 if (vif->type == NL80211_IFTYPE_AP) {
1945                         /*
1946                          * Defer update, so that connected stations can adjust
1947                          * their settings at the same time.
1948                          * See beacon.c for more details
1949                          */
1950                         sc->beacon.slottime = slottime;
1951                         sc->beacon.updateslot = UPDATE;
1952                 } else {
1953                         ah->slottime = slottime;
1954                         ath9k_hw_init_global_settings(ah);
1955                 }
1956         }
1957
1958         /* Disable transmission of beacons */
1959         if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
1960                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1961
1962         if (changed & BSS_CHANGED_BEACON_INT) {
1963                 sc->beacon_interval = bss_conf->beacon_int;
1964                 /*
1965                  * In case of AP mode, the HW TSF has to be reset
1966                  * when the beacon interval changes.
1967                  */
1968                 if (vif->type == NL80211_IFTYPE_AP) {
1969                         sc->sc_flags |= SC_OP_TSF_RESET;
1970                         ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1971                         error = ath_beacon_alloc(aphy, vif);
1972                         if (!error)
1973                                 ath_beacon_config(sc, vif);
1974                 } else {
1975                         ath_beacon_config(sc, vif);
1976                 }
1977         }
1978
1979         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1980                 ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
1981                           bss_conf->use_short_preamble);
1982                 if (bss_conf->use_short_preamble)
1983                         sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
1984                 else
1985                         sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
1986         }
1987
1988         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1989                 ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
1990                           bss_conf->use_cts_prot);
1991                 if (bss_conf->use_cts_prot &&
1992                     hw->conf.channel->band != IEEE80211_BAND_5GHZ)
1993                         sc->sc_flags |= SC_OP_PROTECT_ENABLE;
1994                 else
1995                         sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
1996         }
1997
1998         if (changed & BSS_CHANGED_ASSOC) {
1999                 ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
2000                         bss_conf->assoc);
2001                 ath9k_bss_assoc_info(sc, vif, bss_conf);
2002         }
2003
2004         mutex_unlock(&sc->mutex);
2005 }
2006
2007 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
2008 {
2009         u64 tsf;
2010         struct ath_wiphy *aphy = hw->priv;
2011         struct ath_softc *sc = aphy->sc;
2012
2013         mutex_lock(&sc->mutex);
2014         tsf = ath9k_hw_gettsf64(sc->sc_ah);
2015         mutex_unlock(&sc->mutex);
2016
2017         return tsf;
2018 }
2019
2020 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
2021 {
2022         struct ath_wiphy *aphy = hw->priv;
2023         struct ath_softc *sc = aphy->sc;
2024
2025         mutex_lock(&sc->mutex);
2026         ath9k_hw_settsf64(sc->sc_ah, tsf);
2027         mutex_unlock(&sc->mutex);
2028 }
2029
2030 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
2031 {
2032         struct ath_wiphy *aphy = hw->priv;
2033         struct ath_softc *sc = aphy->sc;
2034
2035         mutex_lock(&sc->mutex);
2036
2037         ath9k_ps_wakeup(sc);
2038         ath9k_hw_reset_tsf(sc->sc_ah);
2039         ath9k_ps_restore(sc);
2040
2041         mutex_unlock(&sc->mutex);
2042 }
2043
2044 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
2045                               struct ieee80211_vif *vif,
2046                               enum ieee80211_ampdu_mlme_action action,
2047                               struct ieee80211_sta *sta,
2048                               u16 tid, u16 *ssn)
2049 {
2050         struct ath_wiphy *aphy = hw->priv;
2051         struct ath_softc *sc = aphy->sc;
2052         int ret = 0;
2053
2054         local_bh_disable();
2055
2056         switch (action) {
2057         case IEEE80211_AMPDU_RX_START:
2058                 if (!(sc->sc_flags & SC_OP_RXAGGR))
2059                         ret = -ENOTSUPP;
2060                 break;
2061         case IEEE80211_AMPDU_RX_STOP:
2062                 break;
2063         case IEEE80211_AMPDU_TX_START:
2064                 ath9k_ps_wakeup(sc);
2065                 ret = ath_tx_aggr_start(sc, sta, tid, ssn);
2066                 if (!ret)
2067                         ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2068                 ath9k_ps_restore(sc);
2069                 break;
2070         case IEEE80211_AMPDU_TX_STOP:
2071                 ath9k_ps_wakeup(sc);
2072                 ath_tx_aggr_stop(sc, sta, tid);
2073                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2074                 ath9k_ps_restore(sc);
2075                 break;
2076         case IEEE80211_AMPDU_TX_OPERATIONAL:
2077                 ath9k_ps_wakeup(sc);
2078                 ath_tx_aggr_resume(sc, sta, tid);
2079                 ath9k_ps_restore(sc);
2080                 break;
2081         default:
2082                 ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
2083                           "Unknown AMPDU action\n");
2084         }
2085
2086         local_bh_enable();
2087
2088         return ret;
2089 }
2090
2091 static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
2092                              struct survey_info *survey)
2093 {
2094         struct ath_wiphy *aphy = hw->priv;
2095         struct ath_softc *sc = aphy->sc;
2096         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
2097         struct ieee80211_supported_band *sband;
2098         struct ieee80211_channel *chan;
2099         unsigned long flags;
2100         int pos;
2101
2102         spin_lock_irqsave(&common->cc_lock, flags);
2103         if (idx == 0)
2104                 ath_update_survey_stats(sc);
2105
2106         sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
2107         if (sband && idx >= sband->n_channels) {
2108                 idx -= sband->n_channels;
2109                 sband = NULL;
2110         }
2111
2112         if (!sband)
2113                 sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
2114
2115         if (!sband || idx >= sband->n_channels) {
2116                 spin_unlock_irqrestore(&common->cc_lock, flags);
2117                 return -ENOENT;
2118         }
2119
2120         chan = &sband->channels[idx];
2121         pos = chan->hw_value;
2122         memcpy(survey, &sc->survey[pos], sizeof(*survey));
2123         survey->channel = chan;
2124         spin_unlock_irqrestore(&common->cc_lock, flags);
2125
2126         return 0;
2127 }
2128
2129 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2130 {
2131         struct ath_wiphy *aphy = hw->priv;
2132         struct ath_softc *sc = aphy->sc;
2133
2134         mutex_lock(&sc->mutex);
2135         if (ath9k_wiphy_scanning(sc)) {
2136                 /*
2137                  * There is a race here in mac80211 but fixing it requires
2138                  * we revisit how we handle the scan complete callback.
2139                  * After mac80211 fixes we will not have configured hardware
2140                  * to the home channel nor would we have configured the RX
2141                  * filter yet.
2142                  */
2143                 mutex_unlock(&sc->mutex);
2144                 return;
2145         }
2146
2147         aphy->state = ATH_WIPHY_SCAN;
2148         ath9k_wiphy_pause_all_forced(sc, aphy);
2149         mutex_unlock(&sc->mutex);
2150 }
2151
2152 /*
2153  * XXX: this requires a revisit after the driver
2154  * scan_complete gets moved to another place/removed in mac80211.
2155  */
2156 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2157 {
2158         struct ath_wiphy *aphy = hw->priv;
2159         struct ath_softc *sc = aphy->sc;
2160
2161         mutex_lock(&sc->mutex);
2162         aphy->state = ATH_WIPHY_ACTIVE;
2163         mutex_unlock(&sc->mutex);
2164 }
2165
2166 static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
2167 {
2168         struct ath_wiphy *aphy = hw->priv;
2169         struct ath_softc *sc = aphy->sc;
2170         struct ath_hw *ah = sc->sc_ah;
2171
2172         mutex_lock(&sc->mutex);
2173         ah->coverage_class = coverage_class;
2174         ath9k_hw_init_global_settings(ah);
2175         mutex_unlock(&sc->mutex);
2176 }
2177
2178 struct ieee80211_ops ath9k_ops = {
2179         .tx                 = ath9k_tx,
2180         .start              = ath9k_start,
2181         .stop               = ath9k_stop,
2182         .add_interface      = ath9k_add_interface,
2183         .remove_interface   = ath9k_remove_interface,
2184         .config             = ath9k_config,
2185         .configure_filter   = ath9k_configure_filter,
2186         .sta_add            = ath9k_sta_add,
2187         .sta_remove         = ath9k_sta_remove,
2188         .conf_tx            = ath9k_conf_tx,
2189         .bss_info_changed   = ath9k_bss_info_changed,
2190         .set_key            = ath9k_set_key,
2191         .get_tsf            = ath9k_get_tsf,
2192         .set_tsf            = ath9k_set_tsf,
2193         .reset_tsf          = ath9k_reset_tsf,
2194         .ampdu_action       = ath9k_ampdu_action,
2195         .get_survey         = ath9k_get_survey,
2196         .sw_scan_start      = ath9k_sw_scan_start,
2197         .sw_scan_complete   = ath9k_sw_scan_complete,
2198         .rfkill_poll        = ath9k_rfkill_poll_state,
2199         .set_coverage_class = ath9k_set_coverage_class,
2200 };