Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[pandora-kernel.git] / drivers / net / wireless / ath / ath5k / base.c
1 /*-
2  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
3  * Copyright (c) 2004-2005 Atheros Communications, Inc.
4  * Copyright (c) 2006 Devicescape Software, Inc.
5  * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
6  * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
7  *
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer,
15  *    without modification.
16  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
18  *    redistribution must be conditioned upon including a substantially
19  *    similar Disclaimer requirement for further binary redistribution.
20  * 3. Neither the names of the above-listed copyright holders nor the names
21  *    of any contributors may be used to endorse or promote products derived
22  *    from this software without specific prior written permission.
23  *
24  * Alternatively, this software may be distributed under the terms of the
25  * GNU General Public License ("GPL") version 2 as published by the Free
26  * Software Foundation.
27  *
28  * NO WARRANTY
29  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
32  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
33  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
34  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
37  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
39  * THE POSSIBILITY OF SUCH DAMAGES.
40  *
41  */
42
43 #include <linux/module.h>
44 #include <linux/delay.h>
45 #include <linux/hardirq.h>
46 #include <linux/if.h>
47 #include <linux/io.h>
48 #include <linux/netdevice.h>
49 #include <linux/cache.h>
50 #include <linux/ethtool.h>
51 #include <linux/uaccess.h>
52 #include <linux/slab.h>
53 #include <linux/etherdevice.h>
54
55 #include <net/ieee80211_radiotap.h>
56
57 #include <asm/unaligned.h>
58
59 #include "base.h"
60 #include "reg.h"
61 #include "debug.h"
62 #include "ani.h"
63
64 static int modparam_nohwcrypt;
65 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
66 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
67
68 static int modparam_all_channels;
69 module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
70 MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
71
72 /* Module info */
73 MODULE_AUTHOR("Jiri Slaby");
74 MODULE_AUTHOR("Nick Kossifidis");
75 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
76 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
77 MODULE_LICENSE("Dual BSD/GPL");
78
79 static int ath5k_init(struct ieee80211_hw *hw);
80 static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
81                                                                 bool skip_pcu);
82 static int ath5k_beacon_update(struct ieee80211_hw *hw,
83                 struct ieee80211_vif *vif);
84 static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
85
86 /* Known SREVs */
87 static const struct ath5k_srev_name srev_names[] = {
88 #ifdef CONFIG_ATHEROS_AR231X
89         { "5312",       AR5K_VERSION_MAC,       AR5K_SREV_AR5312_R2 },
90         { "5312",       AR5K_VERSION_MAC,       AR5K_SREV_AR5312_R7 },
91         { "2313",       AR5K_VERSION_MAC,       AR5K_SREV_AR2313_R8 },
92         { "2315",       AR5K_VERSION_MAC,       AR5K_SREV_AR2315_R6 },
93         { "2315",       AR5K_VERSION_MAC,       AR5K_SREV_AR2315_R7 },
94         { "2317",       AR5K_VERSION_MAC,       AR5K_SREV_AR2317_R1 },
95         { "2317",       AR5K_VERSION_MAC,       AR5K_SREV_AR2317_R2 },
96 #else
97         { "5210",       AR5K_VERSION_MAC,       AR5K_SREV_AR5210 },
98         { "5311",       AR5K_VERSION_MAC,       AR5K_SREV_AR5311 },
99         { "5311A",      AR5K_VERSION_MAC,       AR5K_SREV_AR5311A },
100         { "5311B",      AR5K_VERSION_MAC,       AR5K_SREV_AR5311B },
101         { "5211",       AR5K_VERSION_MAC,       AR5K_SREV_AR5211 },
102         { "5212",       AR5K_VERSION_MAC,       AR5K_SREV_AR5212 },
103         { "5213",       AR5K_VERSION_MAC,       AR5K_SREV_AR5213 },
104         { "5213A",      AR5K_VERSION_MAC,       AR5K_SREV_AR5213A },
105         { "2413",       AR5K_VERSION_MAC,       AR5K_SREV_AR2413 },
106         { "2414",       AR5K_VERSION_MAC,       AR5K_SREV_AR2414 },
107         { "5424",       AR5K_VERSION_MAC,       AR5K_SREV_AR5424 },
108         { "5413",       AR5K_VERSION_MAC,       AR5K_SREV_AR5413 },
109         { "5414",       AR5K_VERSION_MAC,       AR5K_SREV_AR5414 },
110         { "2415",       AR5K_VERSION_MAC,       AR5K_SREV_AR2415 },
111         { "5416",       AR5K_VERSION_MAC,       AR5K_SREV_AR5416 },
112         { "5418",       AR5K_VERSION_MAC,       AR5K_SREV_AR5418 },
113         { "2425",       AR5K_VERSION_MAC,       AR5K_SREV_AR2425 },
114         { "2417",       AR5K_VERSION_MAC,       AR5K_SREV_AR2417 },
115 #endif
116         { "xxxxx",      AR5K_VERSION_MAC,       AR5K_SREV_UNKNOWN },
117         { "5110",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5110 },
118         { "5111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111 },
119         { "5111A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111A },
120         { "2111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2111 },
121         { "5112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112 },
122         { "5112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112A },
123         { "5112B",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112B },
124         { "2112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112 },
125         { "2112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112A },
126         { "2112B",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112B },
127         { "2413",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2413 },
128         { "5413",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5413 },
129         { "5424",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5424 },
130         { "5133",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5133 },
131 #ifdef CONFIG_ATHEROS_AR231X
132         { "2316",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2316 },
133         { "2317",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2317 },
134 #endif
135         { "xxxxx",      AR5K_VERSION_RAD,       AR5K_SREV_UNKNOWN },
136 };
137
138 static const struct ieee80211_rate ath5k_rates[] = {
139         { .bitrate = 10,
140           .hw_value = ATH5K_RATE_CODE_1M, },
141         { .bitrate = 20,
142           .hw_value = ATH5K_RATE_CODE_2M,
143           .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
144           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
145         { .bitrate = 55,
146           .hw_value = ATH5K_RATE_CODE_5_5M,
147           .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
148           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
149         { .bitrate = 110,
150           .hw_value = ATH5K_RATE_CODE_11M,
151           .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
152           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
153         { .bitrate = 60,
154           .hw_value = ATH5K_RATE_CODE_6M,
155           .flags = 0 },
156         { .bitrate = 90,
157           .hw_value = ATH5K_RATE_CODE_9M,
158           .flags = 0 },
159         { .bitrate = 120,
160           .hw_value = ATH5K_RATE_CODE_12M,
161           .flags = 0 },
162         { .bitrate = 180,
163           .hw_value = ATH5K_RATE_CODE_18M,
164           .flags = 0 },
165         { .bitrate = 240,
166           .hw_value = ATH5K_RATE_CODE_24M,
167           .flags = 0 },
168         { .bitrate = 360,
169           .hw_value = ATH5K_RATE_CODE_36M,
170           .flags = 0 },
171         { .bitrate = 480,
172           .hw_value = ATH5K_RATE_CODE_48M,
173           .flags = 0 },
174         { .bitrate = 540,
175           .hw_value = ATH5K_RATE_CODE_54M,
176           .flags = 0 },
177         /* XR missing */
178 };
179
180 static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
181                                 struct ath5k_buf *bf)
182 {
183         BUG_ON(!bf);
184         if (!bf->skb)
185                 return;
186         dma_unmap_single(sc->dev, bf->skbaddr, bf->skb->len,
187                         DMA_TO_DEVICE);
188         dev_kfree_skb_any(bf->skb);
189         bf->skb = NULL;
190         bf->skbaddr = 0;
191         bf->desc->ds_data = 0;
192 }
193
194 static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
195                                 struct ath5k_buf *bf)
196 {
197         struct ath5k_hw *ah = sc->ah;
198         struct ath_common *common = ath5k_hw_common(ah);
199
200         BUG_ON(!bf);
201         if (!bf->skb)
202                 return;
203         dma_unmap_single(sc->dev, bf->skbaddr, common->rx_bufsize,
204                         DMA_FROM_DEVICE);
205         dev_kfree_skb_any(bf->skb);
206         bf->skb = NULL;
207         bf->skbaddr = 0;
208         bf->desc->ds_data = 0;
209 }
210
211
212 static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
213 {
214         u64 tsf = ath5k_hw_get_tsf64(ah);
215
216         if ((tsf & 0x7fff) < rstamp)
217                 tsf -= 0x8000;
218
219         return (tsf & ~0x7fff) | rstamp;
220 }
221
222 const char *
223 ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
224 {
225         const char *name = "xxxxx";
226         unsigned int i;
227
228         for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
229                 if (srev_names[i].sr_type != type)
230                         continue;
231
232                 if ((val & 0xf0) == srev_names[i].sr_val)
233                         name = srev_names[i].sr_name;
234
235                 if ((val & 0xff) == srev_names[i].sr_val) {
236                         name = srev_names[i].sr_name;
237                         break;
238                 }
239         }
240
241         return name;
242 }
243 static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
244 {
245         struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
246         return ath5k_hw_reg_read(ah, reg_offset);
247 }
248
249 static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
250 {
251         struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
252         ath5k_hw_reg_write(ah, val, reg_offset);
253 }
254
255 static const struct ath_ops ath5k_common_ops = {
256         .read = ath5k_ioread32,
257         .write = ath5k_iowrite32,
258 };
259
260 /***********************\
261 * Driver Initialization *
262 \***********************/
263
264 static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
265 {
266         struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
267         struct ath5k_softc *sc = hw->priv;
268         struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah);
269
270         return ath_reg_notifier_apply(wiphy, request, regulatory);
271 }
272
273 /********************\
274 * Channel/mode setup *
275 \********************/
276
277 /*
278  * Convert IEEE channel number to MHz frequency.
279  */
280 static inline short
281 ath5k_ieee2mhz(short chan)
282 {
283         if (chan <= 14 || chan >= 27)
284                 return ieee80211chan2mhz(chan);
285         else
286                 return 2212 + chan * 20;
287 }
288
289 /*
290  * Returns true for the channel numbers used without all_channels modparam.
291  */
292 static bool ath5k_is_standard_channel(short chan)
293 {
294         return ((chan <= 14) ||
295                 /* UNII 1,2 */
296                 ((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
297                 /* midband */
298                 ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
299                 /* UNII-3 */
300                 ((chan & 3) == 1 && chan >= 149 && chan <= 165));
301 }
302
303 static unsigned int
304 ath5k_copy_channels(struct ath5k_hw *ah,
305                 struct ieee80211_channel *channels,
306                 unsigned int mode,
307                 unsigned int max)
308 {
309         unsigned int i, count, size, chfreq, freq, ch;
310
311         if (!test_bit(mode, ah->ah_modes))
312                 return 0;
313
314         switch (mode) {
315         case AR5K_MODE_11A:
316                 /* 1..220, but 2GHz frequencies are filtered by check_channel */
317                 size = 220 ;
318                 chfreq = CHANNEL_5GHZ;
319                 break;
320         case AR5K_MODE_11B:
321         case AR5K_MODE_11G:
322                 size = 26;
323                 chfreq = CHANNEL_2GHZ;
324                 break;
325         default:
326                 ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
327                 return 0;
328         }
329
330         for (i = 0, count = 0; i < size && max > 0; i++) {
331                 ch = i + 1 ;
332                 freq = ath5k_ieee2mhz(ch);
333
334                 /* Check if channel is supported by the chipset */
335                 if (!ath5k_channel_ok(ah, freq, chfreq))
336                         continue;
337
338                 if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
339                         continue;
340
341                 /* Write channel info and increment counter */
342                 channels[count].center_freq = freq;
343                 channels[count].band = (chfreq == CHANNEL_2GHZ) ?
344                         IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
345                 switch (mode) {
346                 case AR5K_MODE_11A:
347                 case AR5K_MODE_11G:
348                         channels[count].hw_value = chfreq | CHANNEL_OFDM;
349                         break;
350                 case AR5K_MODE_11B:
351                         channels[count].hw_value = CHANNEL_B;
352                 }
353
354                 count++;
355                 max--;
356         }
357
358         return count;
359 }
360
361 static void
362 ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
363 {
364         u8 i;
365
366         for (i = 0; i < AR5K_MAX_RATES; i++)
367                 sc->rate_idx[b->band][i] = -1;
368
369         for (i = 0; i < b->n_bitrates; i++) {
370                 sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
371                 if (b->bitrates[i].hw_value_short)
372                         sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
373         }
374 }
375
376 static int
377 ath5k_setup_bands(struct ieee80211_hw *hw)
378 {
379         struct ath5k_softc *sc = hw->priv;
380         struct ath5k_hw *ah = sc->ah;
381         struct ieee80211_supported_band *sband;
382         int max_c, count_c = 0;
383         int i;
384
385         BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
386         max_c = ARRAY_SIZE(sc->channels);
387
388         /* 2GHz band */
389         sband = &sc->sbands[IEEE80211_BAND_2GHZ];
390         sband->band = IEEE80211_BAND_2GHZ;
391         sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
392
393         if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
394                 /* G mode */
395                 memcpy(sband->bitrates, &ath5k_rates[0],
396                        sizeof(struct ieee80211_rate) * 12);
397                 sband->n_bitrates = 12;
398
399                 sband->channels = sc->channels;
400                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
401                                         AR5K_MODE_11G, max_c);
402
403                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
404                 count_c = sband->n_channels;
405                 max_c -= count_c;
406         } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
407                 /* B mode */
408                 memcpy(sband->bitrates, &ath5k_rates[0],
409                        sizeof(struct ieee80211_rate) * 4);
410                 sband->n_bitrates = 4;
411
412                 /* 5211 only supports B rates and uses 4bit rate codes
413                  * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
414                  * fix them up here:
415                  */
416                 if (ah->ah_version == AR5K_AR5211) {
417                         for (i = 0; i < 4; i++) {
418                                 sband->bitrates[i].hw_value =
419                                         sband->bitrates[i].hw_value & 0xF;
420                                 sband->bitrates[i].hw_value_short =
421                                         sband->bitrates[i].hw_value_short & 0xF;
422                         }
423                 }
424
425                 sband->channels = sc->channels;
426                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
427                                         AR5K_MODE_11B, max_c);
428
429                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
430                 count_c = sband->n_channels;
431                 max_c -= count_c;
432         }
433         ath5k_setup_rate_idx(sc, sband);
434
435         /* 5GHz band, A mode */
436         if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
437                 sband = &sc->sbands[IEEE80211_BAND_5GHZ];
438                 sband->band = IEEE80211_BAND_5GHZ;
439                 sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
440
441                 memcpy(sband->bitrates, &ath5k_rates[4],
442                        sizeof(struct ieee80211_rate) * 8);
443                 sband->n_bitrates = 8;
444
445                 sband->channels = &sc->channels[count_c];
446                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
447                                         AR5K_MODE_11A, max_c);
448
449                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
450         }
451         ath5k_setup_rate_idx(sc, sband);
452
453         ath5k_debug_dump_bands(sc);
454
455         return 0;
456 }
457
458 /*
459  * Set/change channels. We always reset the chip.
460  * To accomplish this we must first cleanup any pending DMA,
461  * then restart stuff after a la  ath5k_init.
462  *
463  * Called with sc->lock.
464  */
465 static int
466 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
467 {
468         ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
469                   "channel set, resetting (%u -> %u MHz)\n",
470                   sc->curchan->center_freq, chan->center_freq);
471
472         /*
473          * To switch channels clear any pending DMA operations;
474          * wait long enough for the RX fifo to drain, reset the
475          * hardware at the new frequency, and then re-enable
476          * the relevant bits of the h/w.
477          */
478         return ath5k_reset(sc, chan, true);
479 }
480
481 static void
482 ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
483 {
484         sc->curmode = mode;
485
486         if (mode == AR5K_MODE_11A) {
487                 sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
488         } else {
489                 sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
490         }
491 }
492
493 struct ath_vif_iter_data {
494         const u8        *hw_macaddr;
495         u8              mask[ETH_ALEN];
496         u8              active_mac[ETH_ALEN]; /* first active MAC */
497         bool            need_set_hw_addr;
498         bool            found_active;
499         bool            any_assoc;
500         enum nl80211_iftype opmode;
501 };
502
503 static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
504 {
505         struct ath_vif_iter_data *iter_data = data;
506         int i;
507         struct ath5k_vif *avf = (void *)vif->drv_priv;
508
509         if (iter_data->hw_macaddr)
510                 for (i = 0; i < ETH_ALEN; i++)
511                         iter_data->mask[i] &=
512                                 ~(iter_data->hw_macaddr[i] ^ mac[i]);
513
514         if (!iter_data->found_active) {
515                 iter_data->found_active = true;
516                 memcpy(iter_data->active_mac, mac, ETH_ALEN);
517         }
518
519         if (iter_data->need_set_hw_addr && iter_data->hw_macaddr)
520                 if (compare_ether_addr(iter_data->hw_macaddr, mac) == 0)
521                         iter_data->need_set_hw_addr = false;
522
523         if (!iter_data->any_assoc) {
524                 if (avf->assoc)
525                         iter_data->any_assoc = true;
526         }
527
528         /* Calculate combined mode - when APs are active, operate in AP mode.
529          * Otherwise use the mode of the new interface. This can currently
530          * only deal with combinations of APs and STAs. Only one ad-hoc
531          * interfaces is allowed.
532          */
533         if (avf->opmode == NL80211_IFTYPE_AP)
534                 iter_data->opmode = NL80211_IFTYPE_AP;
535         else
536                 if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED)
537                         iter_data->opmode = avf->opmode;
538 }
539
540 static void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
541                                                struct ieee80211_vif *vif)
542 {
543         struct ath_common *common = ath5k_hw_common(sc->ah);
544         struct ath_vif_iter_data iter_data;
545
546         /*
547          * Use the hardware MAC address as reference, the hardware uses it
548          * together with the BSSID mask when matching addresses.
549          */
550         iter_data.hw_macaddr = common->macaddr;
551         memset(&iter_data.mask, 0xff, ETH_ALEN);
552         iter_data.found_active = false;
553         iter_data.need_set_hw_addr = true;
554         iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED;
555
556         if (vif)
557                 ath_vif_iter(&iter_data, vif->addr, vif);
558
559         /* Get list of all active MAC addresses */
560         ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter,
561                                                    &iter_data);
562         memcpy(sc->bssidmask, iter_data.mask, ETH_ALEN);
563
564         sc->opmode = iter_data.opmode;
565         if (sc->opmode == NL80211_IFTYPE_UNSPECIFIED)
566                 /* Nothing active, default to station mode */
567                 sc->opmode = NL80211_IFTYPE_STATION;
568
569         ath5k_hw_set_opmode(sc->ah, sc->opmode);
570         ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
571                   sc->opmode, ath_opmode_to_string(sc->opmode));
572
573         if (iter_data.need_set_hw_addr && iter_data.found_active)
574                 ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac);
575
576         if (ath5k_hw_hasbssidmask(sc->ah))
577                 ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
578 }
579
580 static void
581 ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif)
582 {
583         struct ath5k_hw *ah = sc->ah;
584         u32 rfilt;
585
586         /* configure rx filter */
587         rfilt = sc->filter_flags;
588         ath5k_hw_set_rx_filter(ah, rfilt);
589         ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
590
591         ath5k_update_bssid_mask_and_opmode(sc, vif);
592 }
593
594 static inline int
595 ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
596 {
597         int rix;
598
599         /* return base rate on errors */
600         if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
601                         "hw_rix out of bounds: %x\n", hw_rix))
602                 return 0;
603
604         rix = sc->rate_idx[sc->curband->band][hw_rix];
605         if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
606                 rix = 0;
607
608         return rix;
609 }
610
611 /***************\
612 * Buffers setup *
613 \***************/
614
615 static
616 struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
617 {
618         struct ath_common *common = ath5k_hw_common(sc->ah);
619         struct sk_buff *skb;
620
621         /*
622          * Allocate buffer with headroom_needed space for the
623          * fake physical layer header at the start.
624          */
625         skb = ath_rxbuf_alloc(common,
626                               common->rx_bufsize,
627                               GFP_ATOMIC);
628
629         if (!skb) {
630                 ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
631                                 common->rx_bufsize);
632                 return NULL;
633         }
634
635         *skb_addr = dma_map_single(sc->dev,
636                                    skb->data, common->rx_bufsize,
637                                    DMA_FROM_DEVICE);
638
639         if (unlikely(dma_mapping_error(sc->dev, *skb_addr))) {
640                 ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
641                 dev_kfree_skb(skb);
642                 return NULL;
643         }
644         return skb;
645 }
646
647 static int
648 ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
649 {
650         struct ath5k_hw *ah = sc->ah;
651         struct sk_buff *skb = bf->skb;
652         struct ath5k_desc *ds;
653         int ret;
654
655         if (!skb) {
656                 skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
657                 if (!skb)
658                         return -ENOMEM;
659                 bf->skb = skb;
660         }
661
662         /*
663          * Setup descriptors.  For receive we always terminate
664          * the descriptor list with a self-linked entry so we'll
665          * not get overrun under high load (as can happen with a
666          * 5212 when ANI processing enables PHY error frames).
667          *
668          * To ensure the last descriptor is self-linked we create
669          * each descriptor as self-linked and add it to the end.  As
670          * each additional descriptor is added the previous self-linked
671          * entry is "fixed" naturally.  This should be safe even
672          * if DMA is happening.  When processing RX interrupts we
673          * never remove/process the last, self-linked, entry on the
674          * descriptor list.  This ensures the hardware always has
675          * someplace to write a new frame.
676          */
677         ds = bf->desc;
678         ds->ds_link = bf->daddr;        /* link to self */
679         ds->ds_data = bf->skbaddr;
680         ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0);
681         if (ret) {
682                 ATH5K_ERR(sc, "%s: could not setup RX desc\n", __func__);
683                 return ret;
684         }
685
686         if (sc->rxlink != NULL)
687                 *sc->rxlink = bf->daddr;
688         sc->rxlink = &ds->ds_link;
689         return 0;
690 }
691
692 static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
693 {
694         struct ieee80211_hdr *hdr;
695         enum ath5k_pkt_type htype;
696         __le16 fc;
697
698         hdr = (struct ieee80211_hdr *)skb->data;
699         fc = hdr->frame_control;
700
701         if (ieee80211_is_beacon(fc))
702                 htype = AR5K_PKT_TYPE_BEACON;
703         else if (ieee80211_is_probe_resp(fc))
704                 htype = AR5K_PKT_TYPE_PROBE_RESP;
705         else if (ieee80211_is_atim(fc))
706                 htype = AR5K_PKT_TYPE_ATIM;
707         else if (ieee80211_is_pspoll(fc))
708                 htype = AR5K_PKT_TYPE_PSPOLL;
709         else
710                 htype = AR5K_PKT_TYPE_NORMAL;
711
712         return htype;
713 }
714
715 static int
716 ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
717                   struct ath5k_txq *txq, int padsize)
718 {
719         struct ath5k_hw *ah = sc->ah;
720         struct ath5k_desc *ds = bf->desc;
721         struct sk_buff *skb = bf->skb;
722         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
723         unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
724         struct ieee80211_rate *rate;
725         unsigned int mrr_rate[3], mrr_tries[3];
726         int i, ret;
727         u16 hw_rate;
728         u16 cts_rate = 0;
729         u16 duration = 0;
730         u8 rc_flags;
731
732         flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
733
734         /* XXX endianness */
735         bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
736                         DMA_TO_DEVICE);
737
738         rate = ieee80211_get_tx_rate(sc->hw, info);
739         if (!rate) {
740                 ret = -EINVAL;
741                 goto err_unmap;
742         }
743
744         if (info->flags & IEEE80211_TX_CTL_NO_ACK)
745                 flags |= AR5K_TXDESC_NOACK;
746
747         rc_flags = info->control.rates[0].flags;
748         hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
749                 rate->hw_value_short : rate->hw_value;
750
751         pktlen = skb->len;
752
753         /* FIXME: If we are in g mode and rate is a CCK rate
754          * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
755          * from tx power (value is in dB units already) */
756         if (info->control.hw_key) {
757                 keyidx = info->control.hw_key->hw_key_idx;
758                 pktlen += info->control.hw_key->icv_len;
759         }
760         if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
761                 flags |= AR5K_TXDESC_RTSENA;
762                 cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
763                 duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
764                         info->control.vif, pktlen, info));
765         }
766         if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
767                 flags |= AR5K_TXDESC_CTSENA;
768                 cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
769                 duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
770                         info->control.vif, pktlen, info));
771         }
772         ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
773                 ieee80211_get_hdrlen_from_skb(skb), padsize,
774                 get_hw_packet_type(skb),
775                 (sc->power_level * 2),
776                 hw_rate,
777                 info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
778                 cts_rate, duration);
779         if (ret)
780                 goto err_unmap;
781
782         memset(mrr_rate, 0, sizeof(mrr_rate));
783         memset(mrr_tries, 0, sizeof(mrr_tries));
784         for (i = 0; i < 3; i++) {
785                 rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
786                 if (!rate)
787                         break;
788
789                 mrr_rate[i] = rate->hw_value;
790                 mrr_tries[i] = info->control.rates[i + 1].count;
791         }
792
793         ath5k_hw_setup_mrr_tx_desc(ah, ds,
794                 mrr_rate[0], mrr_tries[0],
795                 mrr_rate[1], mrr_tries[1],
796                 mrr_rate[2], mrr_tries[2]);
797
798         ds->ds_link = 0;
799         ds->ds_data = bf->skbaddr;
800
801         spin_lock_bh(&txq->lock);
802         list_add_tail(&bf->list, &txq->q);
803         txq->txq_len++;
804         if (txq->link == NULL) /* is this first packet? */
805                 ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
806         else /* no, so only link it */
807                 *txq->link = bf->daddr;
808
809         txq->link = &ds->ds_link;
810         ath5k_hw_start_tx_dma(ah, txq->qnum);
811         mmiowb();
812         spin_unlock_bh(&txq->lock);
813
814         return 0;
815 err_unmap:
816         dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
817         return ret;
818 }
819
820 /*******************\
821 * Descriptors setup *
822 \*******************/
823
824 static int
825 ath5k_desc_alloc(struct ath5k_softc *sc)
826 {
827         struct ath5k_desc *ds;
828         struct ath5k_buf *bf;
829         dma_addr_t da;
830         unsigned int i;
831         int ret;
832
833         /* allocate descriptors */
834         sc->desc_len = sizeof(struct ath5k_desc) *
835                         (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
836
837         sc->desc = dma_alloc_coherent(sc->dev, sc->desc_len,
838                                 &sc->desc_daddr, GFP_KERNEL);
839         if (sc->desc == NULL) {
840                 ATH5K_ERR(sc, "can't allocate descriptors\n");
841                 ret = -ENOMEM;
842                 goto err;
843         }
844         ds = sc->desc;
845         da = sc->desc_daddr;
846         ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
847                 ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
848
849         bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
850                         sizeof(struct ath5k_buf), GFP_KERNEL);
851         if (bf == NULL) {
852                 ATH5K_ERR(sc, "can't allocate bufptr\n");
853                 ret = -ENOMEM;
854                 goto err_free;
855         }
856         sc->bufptr = bf;
857
858         INIT_LIST_HEAD(&sc->rxbuf);
859         for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
860                 bf->desc = ds;
861                 bf->daddr = da;
862                 list_add_tail(&bf->list, &sc->rxbuf);
863         }
864
865         INIT_LIST_HEAD(&sc->txbuf);
866         sc->txbuf_len = ATH_TXBUF;
867         for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
868                         da += sizeof(*ds)) {
869                 bf->desc = ds;
870                 bf->daddr = da;
871                 list_add_tail(&bf->list, &sc->txbuf);
872         }
873
874         /* beacon buffers */
875         INIT_LIST_HEAD(&sc->bcbuf);
876         for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) {
877                 bf->desc = ds;
878                 bf->daddr = da;
879                 list_add_tail(&bf->list, &sc->bcbuf);
880         }
881
882         return 0;
883 err_free:
884         dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
885 err:
886         sc->desc = NULL;
887         return ret;
888 }
889
890 static void
891 ath5k_desc_free(struct ath5k_softc *sc)
892 {
893         struct ath5k_buf *bf;
894
895         list_for_each_entry(bf, &sc->txbuf, list)
896                 ath5k_txbuf_free_skb(sc, bf);
897         list_for_each_entry(bf, &sc->rxbuf, list)
898                 ath5k_rxbuf_free_skb(sc, bf);
899         list_for_each_entry(bf, &sc->bcbuf, list)
900                 ath5k_txbuf_free_skb(sc, bf);
901
902         /* Free memory associated with all descriptors */
903         dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
904         sc->desc = NULL;
905         sc->desc_daddr = 0;
906
907         kfree(sc->bufptr);
908         sc->bufptr = NULL;
909 }
910
911
912 /**************\
913 * Queues setup *
914 \**************/
915
916 static struct ath5k_txq *
917 ath5k_txq_setup(struct ath5k_softc *sc,
918                 int qtype, int subtype)
919 {
920         struct ath5k_hw *ah = sc->ah;
921         struct ath5k_txq *txq;
922         struct ath5k_txq_info qi = {
923                 .tqi_subtype = subtype,
924                 /* XXX: default values not correct for B and XR channels,
925                  * but who cares? */
926                 .tqi_aifs = AR5K_TUNE_AIFS,
927                 .tqi_cw_min = AR5K_TUNE_CWMIN,
928                 .tqi_cw_max = AR5K_TUNE_CWMAX
929         };
930         int qnum;
931
932         /*
933          * Enable interrupts only for EOL and DESC conditions.
934          * We mark tx descriptors to receive a DESC interrupt
935          * when a tx queue gets deep; otherwise we wait for the
936          * EOL to reap descriptors.  Note that this is done to
937          * reduce interrupt load and this only defers reaping
938          * descriptors, never transmitting frames.  Aside from
939          * reducing interrupts this also permits more concurrency.
940          * The only potential downside is if the tx queue backs
941          * up in which case the top half of the kernel may backup
942          * due to a lack of tx descriptors.
943          */
944         qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
945                                 AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
946         qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
947         if (qnum < 0) {
948                 /*
949                  * NB: don't print a message, this happens
950                  * normally on parts with too few tx queues
951                  */
952                 return ERR_PTR(qnum);
953         }
954         if (qnum >= ARRAY_SIZE(sc->txqs)) {
955                 ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
956                         qnum, ARRAY_SIZE(sc->txqs));
957                 ath5k_hw_release_tx_queue(ah, qnum);
958                 return ERR_PTR(-EINVAL);
959         }
960         txq = &sc->txqs[qnum];
961         if (!txq->setup) {
962                 txq->qnum = qnum;
963                 txq->link = NULL;
964                 INIT_LIST_HEAD(&txq->q);
965                 spin_lock_init(&txq->lock);
966                 txq->setup = true;
967                 txq->txq_len = 0;
968                 txq->txq_poll_mark = false;
969                 txq->txq_stuck = 0;
970         }
971         return &sc->txqs[qnum];
972 }
973
974 static int
975 ath5k_beaconq_setup(struct ath5k_hw *ah)
976 {
977         struct ath5k_txq_info qi = {
978                 /* XXX: default values not correct for B and XR channels,
979                  * but who cares? */
980                 .tqi_aifs = AR5K_TUNE_AIFS,
981                 .tqi_cw_min = AR5K_TUNE_CWMIN,
982                 .tqi_cw_max = AR5K_TUNE_CWMAX,
983                 /* NB: for dynamic turbo, don't enable any other interrupts */
984                 .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
985         };
986
987         return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
988 }
989
990 static int
991 ath5k_beaconq_config(struct ath5k_softc *sc)
992 {
993         struct ath5k_hw *ah = sc->ah;
994         struct ath5k_txq_info qi;
995         int ret;
996
997         ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
998         if (ret)
999                 goto err;
1000
1001         if (sc->opmode == NL80211_IFTYPE_AP ||
1002                 sc->opmode == NL80211_IFTYPE_MESH_POINT) {
1003                 /*
1004                  * Always burst out beacon and CAB traffic
1005                  * (aifs = cwmin = cwmax = 0)
1006                  */
1007                 qi.tqi_aifs = 0;
1008                 qi.tqi_cw_min = 0;
1009                 qi.tqi_cw_max = 0;
1010         } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
1011                 /*
1012                  * Adhoc mode; backoff between 0 and (2 * cw_min).
1013                  */
1014                 qi.tqi_aifs = 0;
1015                 qi.tqi_cw_min = 0;
1016                 qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN;
1017         }
1018
1019         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1020                 "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
1021                 qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
1022
1023         ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
1024         if (ret) {
1025                 ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
1026                         "hardware queue!\n", __func__);
1027                 goto err;
1028         }
1029         ret = ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */
1030         if (ret)
1031                 goto err;
1032
1033         /* reconfigure cabq with ready time to 80% of beacon_interval */
1034         ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
1035         if (ret)
1036                 goto err;
1037
1038         qi.tqi_ready_time = (sc->bintval * 80) / 100;
1039         ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
1040         if (ret)
1041                 goto err;
1042
1043         ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
1044 err:
1045         return ret;
1046 }
1047
1048 /**
1049  * ath5k_drain_tx_buffs - Empty tx buffers
1050  *
1051  * @sc The &struct ath5k_softc
1052  *
1053  * Empty tx buffers from all queues in preparation
1054  * of a reset or during shutdown.
1055  *
1056  * NB:  this assumes output has been stopped and
1057  *      we do not need to block ath5k_tx_tasklet
1058  */
1059 static void
1060 ath5k_drain_tx_buffs(struct ath5k_softc *sc)
1061 {
1062         struct ath5k_txq *txq;
1063         struct ath5k_buf *bf, *bf0;
1064         int i;
1065
1066         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
1067                 if (sc->txqs[i].setup) {
1068                         txq = &sc->txqs[i];
1069                         spin_lock_bh(&txq->lock);
1070                         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1071                                 ath5k_debug_printtxbuf(sc, bf);
1072
1073                                 ath5k_txbuf_free_skb(sc, bf);
1074
1075                                 spin_lock_bh(&sc->txbuflock);
1076                                 list_move_tail(&bf->list, &sc->txbuf);
1077                                 sc->txbuf_len++;
1078                                 txq->txq_len--;
1079                                 spin_unlock_bh(&sc->txbuflock);
1080                         }
1081                         txq->link = NULL;
1082                         txq->txq_poll_mark = false;
1083                         spin_unlock_bh(&txq->lock);
1084                 }
1085         }
1086 }
1087
1088 static void
1089 ath5k_txq_release(struct ath5k_softc *sc)
1090 {
1091         struct ath5k_txq *txq = sc->txqs;
1092         unsigned int i;
1093
1094         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
1095                 if (txq->setup) {
1096                         ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
1097                         txq->setup = false;
1098                 }
1099 }
1100
1101
1102 /*************\
1103 * RX Handling *
1104 \*************/
1105
1106 /*
1107  * Enable the receive h/w following a reset.
1108  */
1109 static int
1110 ath5k_rx_start(struct ath5k_softc *sc)
1111 {
1112         struct ath5k_hw *ah = sc->ah;
1113         struct ath_common *common = ath5k_hw_common(ah);
1114         struct ath5k_buf *bf;
1115         int ret;
1116
1117         common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
1118
1119         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
1120                   common->cachelsz, common->rx_bufsize);
1121
1122         spin_lock_bh(&sc->rxbuflock);
1123         sc->rxlink = NULL;
1124         list_for_each_entry(bf, &sc->rxbuf, list) {
1125                 ret = ath5k_rxbuf_setup(sc, bf);
1126                 if (ret != 0) {
1127                         spin_unlock_bh(&sc->rxbuflock);
1128                         goto err;
1129                 }
1130         }
1131         bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1132         ath5k_hw_set_rxdp(ah, bf->daddr);
1133         spin_unlock_bh(&sc->rxbuflock);
1134
1135         ath5k_hw_start_rx_dma(ah);      /* enable recv descriptors */
1136         ath5k_mode_setup(sc, NULL);             /* set filters, etc. */
1137         ath5k_hw_start_rx_pcu(ah);      /* re-enable PCU/DMA engine */
1138
1139         return 0;
1140 err:
1141         return ret;
1142 }
1143
1144 /*
1145  * Disable the receive logic on PCU (DRU)
1146  * In preparation for a shutdown.
1147  *
1148  * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop
1149  * does.
1150  */
1151 static void
1152 ath5k_rx_stop(struct ath5k_softc *sc)
1153 {
1154         struct ath5k_hw *ah = sc->ah;
1155
1156         ath5k_hw_set_rx_filter(ah, 0);  /* clear recv filter */
1157         ath5k_hw_stop_rx_pcu(ah);       /* disable PCU */
1158
1159         ath5k_debug_printrxbuffs(sc, ah);
1160 }
1161
1162 static unsigned int
1163 ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb,
1164                    struct ath5k_rx_status *rs)
1165 {
1166         struct ath5k_hw *ah = sc->ah;
1167         struct ath_common *common = ath5k_hw_common(ah);
1168         struct ieee80211_hdr *hdr = (void *)skb->data;
1169         unsigned int keyix, hlen;
1170
1171         if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1172                         rs->rs_keyix != AR5K_RXKEYIX_INVALID)
1173                 return RX_FLAG_DECRYPTED;
1174
1175         /* Apparently when a default key is used to decrypt the packet
1176            the hw does not set the index used to decrypt.  In such cases
1177            get the index from the packet. */
1178         hlen = ieee80211_hdrlen(hdr->frame_control);
1179         if (ieee80211_has_protected(hdr->frame_control) &&
1180             !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1181             skb->len >= hlen + 4) {
1182                 keyix = skb->data[hlen + 3] >> 6;
1183
1184                 if (test_bit(keyix, common->keymap))
1185                         return RX_FLAG_DECRYPTED;
1186         }
1187
1188         return 0;
1189 }
1190
1191
1192 static void
1193 ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
1194                      struct ieee80211_rx_status *rxs)
1195 {
1196         struct ath_common *common = ath5k_hw_common(sc->ah);
1197         u64 tsf, bc_tstamp;
1198         u32 hw_tu;
1199         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1200
1201         if (ieee80211_is_beacon(mgmt->frame_control) &&
1202             le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
1203             memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
1204                 /*
1205                  * Received an IBSS beacon with the same BSSID. Hardware *must*
1206                  * have updated the local TSF. We have to work around various
1207                  * hardware bugs, though...
1208                  */
1209                 tsf = ath5k_hw_get_tsf64(sc->ah);
1210                 bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
1211                 hw_tu = TSF_TO_TU(tsf);
1212
1213                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1214                         "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
1215                         (unsigned long long)bc_tstamp,
1216                         (unsigned long long)rxs->mactime,
1217                         (unsigned long long)(rxs->mactime - bc_tstamp),
1218                         (unsigned long long)tsf);
1219
1220                 /*
1221                  * Sometimes the HW will give us a wrong tstamp in the rx
1222                  * status, causing the timestamp extension to go wrong.
1223                  * (This seems to happen especially with beacon frames bigger
1224                  * than 78 byte (incl. FCS))
1225                  * But we know that the receive timestamp must be later than the
1226                  * timestamp of the beacon since HW must have synced to that.
1227                  *
1228                  * NOTE: here we assume mactime to be after the frame was
1229                  * received, not like mac80211 which defines it at the start.
1230                  */
1231                 if (bc_tstamp > rxs->mactime) {
1232                         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1233                                 "fixing mactime from %llx to %llx\n",
1234                                 (unsigned long long)rxs->mactime,
1235                                 (unsigned long long)tsf);
1236                         rxs->mactime = tsf;
1237                 }
1238
1239                 /*
1240                  * Local TSF might have moved higher than our beacon timers,
1241                  * in that case we have to update them to continue sending
1242                  * beacons. This also takes care of synchronizing beacon sending
1243                  * times with other stations.
1244                  */
1245                 if (hw_tu >= sc->nexttbtt)
1246                         ath5k_beacon_update_timers(sc, bc_tstamp);
1247
1248                 /* Check if the beacon timers are still correct, because a TSF
1249                  * update might have created a window between them - for a
1250                  * longer description see the comment of this function: */
1251                 if (!ath5k_hw_check_beacon_timers(sc->ah, sc->bintval)) {
1252                         ath5k_beacon_update_timers(sc, bc_tstamp);
1253                         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1254                                 "fixed beacon timers after beacon receive\n");
1255                 }
1256         }
1257 }
1258
1259 static void
1260 ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
1261 {
1262         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1263         struct ath5k_hw *ah = sc->ah;
1264         struct ath_common *common = ath5k_hw_common(ah);
1265
1266         /* only beacons from our BSSID */
1267         if (!ieee80211_is_beacon(mgmt->frame_control) ||
1268             memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
1269                 return;
1270
1271         ewma_add(&ah->ah_beacon_rssi_avg, rssi);
1272
1273         /* in IBSS mode we should keep RSSI statistics per neighbour */
1274         /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
1275 }
1276
1277 /*
1278  * Compute padding position. skb must contain an IEEE 802.11 frame
1279  */
1280 static int ath5k_common_padpos(struct sk_buff *skb)
1281 {
1282         struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
1283         __le16 frame_control = hdr->frame_control;
1284         int padpos = 24;
1285
1286         if (ieee80211_has_a4(frame_control)) {
1287                 padpos += ETH_ALEN;
1288         }
1289         if (ieee80211_is_data_qos(frame_control)) {
1290                 padpos += IEEE80211_QOS_CTL_LEN;
1291         }
1292
1293         return padpos;
1294 }
1295
1296 /*
1297  * This function expects an 802.11 frame and returns the number of
1298  * bytes added, or -1 if we don't have enough header room.
1299  */
1300 static int ath5k_add_padding(struct sk_buff *skb)
1301 {
1302         int padpos = ath5k_common_padpos(skb);
1303         int padsize = padpos & 3;
1304
1305         if (padsize && skb->len>padpos) {
1306
1307                 if (skb_headroom(skb) < padsize)
1308                         return -1;
1309
1310                 skb_push(skb, padsize);
1311                 memmove(skb->data, skb->data+padsize, padpos);
1312                 return padsize;
1313         }
1314
1315         return 0;
1316 }
1317
1318 /*
1319  * The MAC header is padded to have 32-bit boundary if the
1320  * packet payload is non-zero. The general calculation for
1321  * padsize would take into account odd header lengths:
1322  * padsize = 4 - (hdrlen & 3); however, since only
1323  * even-length headers are used, padding can only be 0 or 2
1324  * bytes and we can optimize this a bit.  We must not try to
1325  * remove padding from short control frames that do not have a
1326  * payload.
1327  *
1328  * This function expects an 802.11 frame and returns the number of
1329  * bytes removed.
1330  */
1331 static int ath5k_remove_padding(struct sk_buff *skb)
1332 {
1333         int padpos = ath5k_common_padpos(skb);
1334         int padsize = padpos & 3;
1335
1336         if (padsize && skb->len>=padpos+padsize) {
1337                 memmove(skb->data + padsize, skb->data, padpos);
1338                 skb_pull(skb, padsize);
1339                 return padsize;
1340         }
1341
1342         return 0;
1343 }
1344
1345 static void
1346 ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
1347                     struct ath5k_rx_status *rs)
1348 {
1349         struct ieee80211_rx_status *rxs;
1350
1351         ath5k_remove_padding(skb);
1352
1353         rxs = IEEE80211_SKB_RXCB(skb);
1354
1355         rxs->flag = 0;
1356         if (unlikely(rs->rs_status & AR5K_RXERR_MIC))
1357                 rxs->flag |= RX_FLAG_MMIC_ERROR;
1358
1359         /*
1360          * always extend the mac timestamp, since this information is
1361          * also needed for proper IBSS merging.
1362          *
1363          * XXX: it might be too late to do it here, since rs_tstamp is
1364          * 15bit only. that means TSF extension has to be done within
1365          * 32768usec (about 32ms). it might be necessary to move this to
1366          * the interrupt handler, like it is done in madwifi.
1367          *
1368          * Unfortunately we don't know when the hardware takes the rx
1369          * timestamp (beginning of phy frame, data frame, end of rx?).
1370          * The only thing we know is that it is hardware specific...
1371          * On AR5213 it seems the rx timestamp is at the end of the
1372          * frame, but i'm not sure.
1373          *
1374          * NOTE: mac80211 defines mactime at the beginning of the first
1375          * data symbol. Since we don't have any time references it's
1376          * impossible to comply to that. This affects IBSS merge only
1377          * right now, so it's not too bad...
1378          */
1379         rxs->mactime = ath5k_extend_tsf(sc->ah, rs->rs_tstamp);
1380         rxs->flag |= RX_FLAG_TSFT;
1381
1382         rxs->freq = sc->curchan->center_freq;
1383         rxs->band = sc->curband->band;
1384
1385         rxs->signal = sc->ah->ah_noise_floor + rs->rs_rssi;
1386
1387         rxs->antenna = rs->rs_antenna;
1388
1389         if (rs->rs_antenna > 0 && rs->rs_antenna < 5)
1390                 sc->stats.antenna_rx[rs->rs_antenna]++;
1391         else
1392                 sc->stats.antenna_rx[0]++; /* invalid */
1393
1394         rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs->rs_rate);
1395         rxs->flag |= ath5k_rx_decrypted(sc, skb, rs);
1396
1397         if (rxs->rate_idx >= 0 && rs->rs_rate ==
1398             sc->curband->bitrates[rxs->rate_idx].hw_value_short)
1399                 rxs->flag |= RX_FLAG_SHORTPRE;
1400
1401         ath5k_debug_dump_skb(sc, skb, "RX  ", 0);
1402
1403         ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi);
1404
1405         /* check beacons in IBSS mode */
1406         if (sc->opmode == NL80211_IFTYPE_ADHOC)
1407                 ath5k_check_ibss_tsf(sc, skb, rxs);
1408
1409         ieee80211_rx(sc->hw, skb);
1410 }
1411
1412 /** ath5k_frame_receive_ok() - Do we want to receive this frame or not?
1413  *
1414  * Check if we want to further process this frame or not. Also update
1415  * statistics. Return true if we want this frame, false if not.
1416  */
1417 static bool
1418 ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
1419 {
1420         sc->stats.rx_all_count++;
1421         sc->stats.rx_bytes_count += rs->rs_datalen;
1422
1423         if (unlikely(rs->rs_status)) {
1424                 if (rs->rs_status & AR5K_RXERR_CRC)
1425                         sc->stats.rxerr_crc++;
1426                 if (rs->rs_status & AR5K_RXERR_FIFO)
1427                         sc->stats.rxerr_fifo++;
1428                 if (rs->rs_status & AR5K_RXERR_PHY) {
1429                         sc->stats.rxerr_phy++;
1430                         if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32)
1431                                 sc->stats.rxerr_phy_code[rs->rs_phyerr]++;
1432                         return false;
1433                 }
1434                 if (rs->rs_status & AR5K_RXERR_DECRYPT) {
1435                         /*
1436                          * Decrypt error.  If the error occurred
1437                          * because there was no hardware key, then
1438                          * let the frame through so the upper layers
1439                          * can process it.  This is necessary for 5210
1440                          * parts which have no way to setup a ``clear''
1441                          * key cache entry.
1442                          *
1443                          * XXX do key cache faulting
1444                          */
1445                         sc->stats.rxerr_decrypt++;
1446                         if (rs->rs_keyix == AR5K_RXKEYIX_INVALID &&
1447                             !(rs->rs_status & AR5K_RXERR_CRC))
1448                                 return true;
1449                 }
1450                 if (rs->rs_status & AR5K_RXERR_MIC) {
1451                         sc->stats.rxerr_mic++;
1452                         return true;
1453                 }
1454
1455                 /* reject any frames with non-crypto errors */
1456                 if (rs->rs_status & ~(AR5K_RXERR_DECRYPT))
1457                         return false;
1458         }
1459
1460         if (unlikely(rs->rs_more)) {
1461                 sc->stats.rxerr_jumbo++;
1462                 return false;
1463         }
1464         return true;
1465 }
1466
1467 static void
1468 ath5k_tasklet_rx(unsigned long data)
1469 {
1470         struct ath5k_rx_status rs = {};
1471         struct sk_buff *skb, *next_skb;
1472         dma_addr_t next_skb_addr;
1473         struct ath5k_softc *sc = (void *)data;
1474         struct ath5k_hw *ah = sc->ah;
1475         struct ath_common *common = ath5k_hw_common(ah);
1476         struct ath5k_buf *bf;
1477         struct ath5k_desc *ds;
1478         int ret;
1479
1480         spin_lock(&sc->rxbuflock);
1481         if (list_empty(&sc->rxbuf)) {
1482                 ATH5K_WARN(sc, "empty rx buf pool\n");
1483                 goto unlock;
1484         }
1485         do {
1486                 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1487                 BUG_ON(bf->skb == NULL);
1488                 skb = bf->skb;
1489                 ds = bf->desc;
1490
1491                 /* bail if HW is still using self-linked descriptor */
1492                 if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr)
1493                         break;
1494
1495                 ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
1496                 if (unlikely(ret == -EINPROGRESS))
1497                         break;
1498                 else if (unlikely(ret)) {
1499                         ATH5K_ERR(sc, "error in processing rx descriptor\n");
1500                         sc->stats.rxerr_proc++;
1501                         break;
1502                 }
1503
1504                 if (ath5k_receive_frame_ok(sc, &rs)) {
1505                         next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
1506
1507                         /*
1508                          * If we can't replace bf->skb with a new skb under
1509                          * memory pressure, just skip this packet
1510                          */
1511                         if (!next_skb)
1512                                 goto next;
1513
1514                         dma_unmap_single(sc->dev, bf->skbaddr,
1515                                          common->rx_bufsize,
1516                                          DMA_FROM_DEVICE);
1517
1518                         skb_put(skb, rs.rs_datalen);
1519
1520                         ath5k_receive_frame(sc, skb, &rs);
1521
1522                         bf->skb = next_skb;
1523                         bf->skbaddr = next_skb_addr;
1524                 }
1525 next:
1526                 list_move_tail(&bf->list, &sc->rxbuf);
1527         } while (ath5k_rxbuf_setup(sc, bf) == 0);
1528 unlock:
1529         spin_unlock(&sc->rxbuflock);
1530 }
1531
1532
1533 /*************\
1534 * TX Handling *
1535 \*************/
1536
1537 static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
1538                           struct ath5k_txq *txq)
1539 {
1540         struct ath5k_softc *sc = hw->priv;
1541         struct ath5k_buf *bf;
1542         unsigned long flags;
1543         int padsize;
1544
1545         ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
1546
1547         /*
1548          * The hardware expects the header padded to 4 byte boundaries.
1549          * If this is not the case, we add the padding after the header.
1550          */
1551         padsize = ath5k_add_padding(skb);
1552         if (padsize < 0) {
1553                 ATH5K_ERR(sc, "tx hdrlen not %%4: not enough"
1554                           " headroom to pad");
1555                 goto drop_packet;
1556         }
1557
1558         if (txq->txq_len >= ATH5K_TXQ_LEN_MAX)
1559                 ieee80211_stop_queue(hw, txq->qnum);
1560
1561         spin_lock_irqsave(&sc->txbuflock, flags);
1562         if (list_empty(&sc->txbuf)) {
1563                 ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
1564                 spin_unlock_irqrestore(&sc->txbuflock, flags);
1565                 ieee80211_stop_queues(hw);
1566                 goto drop_packet;
1567         }
1568         bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
1569         list_del(&bf->list);
1570         sc->txbuf_len--;
1571         if (list_empty(&sc->txbuf))
1572                 ieee80211_stop_queues(hw);
1573         spin_unlock_irqrestore(&sc->txbuflock, flags);
1574
1575         bf->skb = skb;
1576
1577         if (ath5k_txbuf_setup(sc, bf, txq, padsize)) {
1578                 bf->skb = NULL;
1579                 spin_lock_irqsave(&sc->txbuflock, flags);
1580                 list_add_tail(&bf->list, &sc->txbuf);
1581                 sc->txbuf_len++;
1582                 spin_unlock_irqrestore(&sc->txbuflock, flags);
1583                 goto drop_packet;
1584         }
1585         return NETDEV_TX_OK;
1586
1587 drop_packet:
1588         dev_kfree_skb_any(skb);
1589         return NETDEV_TX_OK;
1590 }
1591
1592 static void
1593 ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb,
1594                          struct ath5k_tx_status *ts)
1595 {
1596         struct ieee80211_tx_info *info;
1597         int i;
1598
1599         sc->stats.tx_all_count++;
1600         sc->stats.tx_bytes_count += skb->len;
1601         info = IEEE80211_SKB_CB(skb);
1602
1603         ieee80211_tx_info_clear_status(info);
1604         for (i = 0; i < 4; i++) {
1605                 struct ieee80211_tx_rate *r =
1606                         &info->status.rates[i];
1607
1608                 if (ts->ts_rate[i]) {
1609                         r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]);
1610                         r->count = ts->ts_retry[i];
1611                 } else {
1612                         r->idx = -1;
1613                         r->count = 0;
1614                 }
1615         }
1616
1617         /* count the successful attempt as well */
1618         info->status.rates[ts->ts_final_idx].count++;
1619
1620         if (unlikely(ts->ts_status)) {
1621                 sc->stats.ack_fail++;
1622                 if (ts->ts_status & AR5K_TXERR_FILT) {
1623                         info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
1624                         sc->stats.txerr_filt++;
1625                 }
1626                 if (ts->ts_status & AR5K_TXERR_XRETRY)
1627                         sc->stats.txerr_retry++;
1628                 if (ts->ts_status & AR5K_TXERR_FIFO)
1629                         sc->stats.txerr_fifo++;
1630         } else {
1631                 info->flags |= IEEE80211_TX_STAT_ACK;
1632                 info->status.ack_signal = ts->ts_rssi;
1633         }
1634
1635         /*
1636         * Remove MAC header padding before giving the frame
1637         * back to mac80211.
1638         */
1639         ath5k_remove_padding(skb);
1640
1641         if (ts->ts_antenna > 0 && ts->ts_antenna < 5)
1642                 sc->stats.antenna_tx[ts->ts_antenna]++;
1643         else
1644                 sc->stats.antenna_tx[0]++; /* invalid */
1645
1646         ieee80211_tx_status(sc->hw, skb);
1647 }
1648
1649 static void
1650 ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1651 {
1652         struct ath5k_tx_status ts = {};
1653         struct ath5k_buf *bf, *bf0;
1654         struct ath5k_desc *ds;
1655         struct sk_buff *skb;
1656         int ret;
1657
1658         spin_lock(&txq->lock);
1659         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1660
1661                 txq->txq_poll_mark = false;
1662
1663                 /* skb might already have been processed last time. */
1664                 if (bf->skb != NULL) {
1665                         ds = bf->desc;
1666
1667                         ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
1668                         if (unlikely(ret == -EINPROGRESS))
1669                                 break;
1670                         else if (unlikely(ret)) {
1671                                 ATH5K_ERR(sc,
1672                                         "error %d while processing "
1673                                         "queue %u\n", ret, txq->qnum);
1674                                 break;
1675                         }
1676
1677                         skb = bf->skb;
1678                         bf->skb = NULL;
1679
1680                         dma_unmap_single(sc->dev, bf->skbaddr, skb->len,
1681                                         DMA_TO_DEVICE);
1682                         ath5k_tx_frame_completed(sc, skb, &ts);
1683                 }
1684
1685                 /*
1686                  * It's possible that the hardware can say the buffer is
1687                  * completed when it hasn't yet loaded the ds_link from
1688                  * host memory and moved on.
1689                  * Always keep the last descriptor to avoid HW races...
1690                  */
1691                 if (ath5k_hw_get_txdp(sc->ah, txq->qnum) != bf->daddr) {
1692                         spin_lock(&sc->txbuflock);
1693                         list_move_tail(&bf->list, &sc->txbuf);
1694                         sc->txbuf_len++;
1695                         txq->txq_len--;
1696                         spin_unlock(&sc->txbuflock);
1697                 }
1698         }
1699         spin_unlock(&txq->lock);
1700         if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4)
1701                 ieee80211_wake_queue(sc->hw, txq->qnum);
1702 }
1703
1704 static void
1705 ath5k_tasklet_tx(unsigned long data)
1706 {
1707         int i;
1708         struct ath5k_softc *sc = (void *)data;
1709
1710         for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
1711                 if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
1712                         ath5k_tx_processq(sc, &sc->txqs[i]);
1713 }
1714
1715
1716 /*****************\
1717 * Beacon handling *
1718 \*****************/
1719
1720 /*
1721  * Setup the beacon frame for transmit.
1722  */
1723 static int
1724 ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1725 {
1726         struct sk_buff *skb = bf->skb;
1727         struct  ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1728         struct ath5k_hw *ah = sc->ah;
1729         struct ath5k_desc *ds;
1730         int ret = 0;
1731         u8 antenna;
1732         u32 flags;
1733         const int padsize = 0;
1734
1735         bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
1736                         DMA_TO_DEVICE);
1737         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
1738                         "skbaddr %llx\n", skb, skb->data, skb->len,
1739                         (unsigned long long)bf->skbaddr);
1740
1741         if (dma_mapping_error(sc->dev, bf->skbaddr)) {
1742                 ATH5K_ERR(sc, "beacon DMA mapping failed\n");
1743                 return -EIO;
1744         }
1745
1746         ds = bf->desc;
1747         antenna = ah->ah_tx_ant;
1748
1749         flags = AR5K_TXDESC_NOACK;
1750         if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
1751                 ds->ds_link = bf->daddr;        /* self-linked */
1752                 flags |= AR5K_TXDESC_VEOL;
1753         } else
1754                 ds->ds_link = 0;
1755
1756         /*
1757          * If we use multiple antennas on AP and use
1758          * the Sectored AP scenario, switch antenna every
1759          * 4 beacons to make sure everybody hears our AP.
1760          * When a client tries to associate, hw will keep
1761          * track of the tx antenna to be used for this client
1762          * automaticaly, based on ACKed packets.
1763          *
1764          * Note: AP still listens and transmits RTS on the
1765          * default antenna which is supposed to be an omni.
1766          *
1767          * Note2: On sectored scenarios it's possible to have
1768          * multiple antennas (1 omni -- the default -- and 14
1769          * sectors), so if we choose to actually support this
1770          * mode, we need to allow the user to set how many antennas
1771          * we have and tweak the code below to send beacons
1772          * on all of them.
1773          */
1774         if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
1775                 antenna = sc->bsent & 4 ? 2 : 1;
1776
1777
1778         /* FIXME: If we are in g mode and rate is a CCK rate
1779          * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
1780          * from tx power (value is in dB units already) */
1781         ds->ds_data = bf->skbaddr;
1782         ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
1783                         ieee80211_get_hdrlen_from_skb(skb), padsize,
1784                         AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
1785                         ieee80211_get_tx_rate(sc->hw, info)->hw_value,
1786                         1, AR5K_TXKEYIX_INVALID,
1787                         antenna, flags, 0, 0);
1788         if (ret)
1789                 goto err_unmap;
1790
1791         return 0;
1792 err_unmap:
1793         dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
1794         return ret;
1795 }
1796
1797 /*
1798  * Updates the beacon that is sent by ath5k_beacon_send.  For adhoc,
1799  * this is called only once at config_bss time, for AP we do it every
1800  * SWBA interrupt so that the TIM will reflect buffered frames.
1801  *
1802  * Called with the beacon lock.
1803  */
1804 static int
1805 ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
1806 {
1807         int ret;
1808         struct ath5k_softc *sc = hw->priv;
1809         struct ath5k_vif *avf = (void *)vif->drv_priv;
1810         struct sk_buff *skb;
1811
1812         if (WARN_ON(!vif)) {
1813                 ret = -EINVAL;
1814                 goto out;
1815         }
1816
1817         skb = ieee80211_beacon_get(hw, vif);
1818
1819         if (!skb) {
1820                 ret = -ENOMEM;
1821                 goto out;
1822         }
1823
1824         ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
1825
1826         ath5k_txbuf_free_skb(sc, avf->bbuf);
1827         avf->bbuf->skb = skb;
1828         ret = ath5k_beacon_setup(sc, avf->bbuf);
1829         if (ret)
1830                 avf->bbuf->skb = NULL;
1831 out:
1832         return ret;
1833 }
1834
1835 /*
1836  * Transmit a beacon frame at SWBA.  Dynamic updates to the
1837  * frame contents are done as needed and the slot time is
1838  * also adjusted based on current state.
1839  *
1840  * This is called from software irq context (beacontq tasklets)
1841  * or user context from ath5k_beacon_config.
1842  */
1843 static void
1844 ath5k_beacon_send(struct ath5k_softc *sc)
1845 {
1846         struct ath5k_hw *ah = sc->ah;
1847         struct ieee80211_vif *vif;
1848         struct ath5k_vif *avf;
1849         struct ath5k_buf *bf;
1850         struct sk_buff *skb;
1851
1852         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
1853
1854         /*
1855          * Check if the previous beacon has gone out.  If
1856          * not, don't don't try to post another: skip this
1857          * period and wait for the next.  Missed beacons
1858          * indicate a problem and should not occur.  If we
1859          * miss too many consecutive beacons reset the device.
1860          */
1861         if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
1862                 sc->bmisscount++;
1863                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1864                         "missed %u consecutive beacons\n", sc->bmisscount);
1865                 if (sc->bmisscount > 10) {      /* NB: 10 is a guess */
1866                         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1867                                 "stuck beacon time (%u missed)\n",
1868                                 sc->bmisscount);
1869                         ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
1870                                   "stuck beacon, resetting\n");
1871                         ieee80211_queue_work(sc->hw, &sc->reset_work);
1872                 }
1873                 return;
1874         }
1875         if (unlikely(sc->bmisscount != 0)) {
1876                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1877                         "resume beacon xmit after %u misses\n",
1878                         sc->bmisscount);
1879                 sc->bmisscount = 0;
1880         }
1881
1882         if ((sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) ||
1883                         sc->opmode == NL80211_IFTYPE_MESH_POINT) {
1884                 u64 tsf = ath5k_hw_get_tsf64(ah);
1885                 u32 tsftu = TSF_TO_TU(tsf);
1886                 int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval;
1887                 vif = sc->bslot[(slot + 1) % ATH_BCBUF];
1888                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1889                         "tsf %llx tsftu %x intval %u slot %u vif %p\n",
1890                         (unsigned long long)tsf, tsftu, sc->bintval, slot, vif);
1891         } else /* only one interface */
1892                 vif = sc->bslot[0];
1893
1894         if (!vif)
1895                 return;
1896
1897         avf = (void *)vif->drv_priv;
1898         bf = avf->bbuf;
1899         if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
1900                         sc->opmode == NL80211_IFTYPE_MONITOR)) {
1901                 ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
1902                 return;
1903         }
1904
1905         /*
1906          * Stop any current dma and put the new frame on the queue.
1907          * This should never fail since we check above that no frames
1908          * are still pending on the queue.
1909          */
1910         if (unlikely(ath5k_hw_stop_beacon_queue(ah, sc->bhalq))) {
1911                 ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
1912                 /* NB: hw still stops DMA, so proceed */
1913         }
1914
1915         /* refresh the beacon for AP or MESH mode */
1916         if (sc->opmode == NL80211_IFTYPE_AP ||
1917                         sc->opmode == NL80211_IFTYPE_MESH_POINT)
1918                 ath5k_beacon_update(sc->hw, vif);
1919
1920         ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
1921         ath5k_hw_start_tx_dma(ah, sc->bhalq);
1922         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
1923                 sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
1924
1925         skb = ieee80211_get_buffered_bc(sc->hw, vif);
1926         while (skb) {
1927                 ath5k_tx_queue(sc->hw, skb, sc->cabq);
1928                 skb = ieee80211_get_buffered_bc(sc->hw, vif);
1929         }
1930
1931         sc->bsent++;
1932 }
1933
1934 /**
1935  * ath5k_beacon_update_timers - update beacon timers
1936  *
1937  * @sc: struct ath5k_softc pointer we are operating on
1938  * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
1939  *          beacon timer update based on the current HW TSF.
1940  *
1941  * Calculate the next target beacon transmit time (TBTT) based on the timestamp
1942  * of a received beacon or the current local hardware TSF and write it to the
1943  * beacon timer registers.
1944  *
1945  * This is called in a variety of situations, e.g. when a beacon is received,
1946  * when a TSF update has been detected, but also when an new IBSS is created or
1947  * when we otherwise know we have to update the timers, but we keep it in this
1948  * function to have it all together in one place.
1949  */
1950 static void
1951 ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
1952 {
1953         struct ath5k_hw *ah = sc->ah;
1954         u32 nexttbtt, intval, hw_tu, bc_tu;
1955         u64 hw_tsf;
1956
1957         intval = sc->bintval & AR5K_BEACON_PERIOD;
1958         if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
1959                 intval /= ATH_BCBUF;    /* staggered multi-bss beacons */
1960                 if (intval < 15)
1961                         ATH5K_WARN(sc, "intval %u is too low, min 15\n",
1962                                    intval);
1963         }
1964         if (WARN_ON(!intval))
1965                 return;
1966
1967         /* beacon TSF converted to TU */
1968         bc_tu = TSF_TO_TU(bc_tsf);
1969
1970         /* current TSF converted to TU */
1971         hw_tsf = ath5k_hw_get_tsf64(ah);
1972         hw_tu = TSF_TO_TU(hw_tsf);
1973
1974 #define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
1975         /* We use FUDGE to make sure the next TBTT is ahead of the current TU.
1976          * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
1977          * configuration we need to make sure it is bigger than that. */
1978
1979         if (bc_tsf == -1) {
1980                 /*
1981                  * no beacons received, called internally.
1982                  * just need to refresh timers based on HW TSF.
1983                  */
1984                 nexttbtt = roundup(hw_tu + FUDGE, intval);
1985         } else if (bc_tsf == 0) {
1986                 /*
1987                  * no beacon received, probably called by ath5k_reset_tsf().
1988                  * reset TSF to start with 0.
1989                  */
1990                 nexttbtt = intval;
1991                 intval |= AR5K_BEACON_RESET_TSF;
1992         } else if (bc_tsf > hw_tsf) {
1993                 /*
1994                  * beacon received, SW merge happend but HW TSF not yet updated.
1995                  * not possible to reconfigure timers yet, but next time we
1996                  * receive a beacon with the same BSSID, the hardware will
1997                  * automatically update the TSF and then we need to reconfigure
1998                  * the timers.
1999                  */
2000                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2001                         "need to wait for HW TSF sync\n");
2002                 return;
2003         } else {
2004                 /*
2005                  * most important case for beacon synchronization between STA.
2006                  *
2007                  * beacon received and HW TSF has been already updated by HW.
2008                  * update next TBTT based on the TSF of the beacon, but make
2009                  * sure it is ahead of our local TSF timer.
2010                  */
2011                 nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
2012         }
2013 #undef FUDGE
2014
2015         sc->nexttbtt = nexttbtt;
2016
2017         intval |= AR5K_BEACON_ENA;
2018         ath5k_hw_init_beacon(ah, nexttbtt, intval);
2019
2020         /*
2021          * debugging output last in order to preserve the time critical aspect
2022          * of this function
2023          */
2024         if (bc_tsf == -1)
2025                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2026                         "reconfigured timers based on HW TSF\n");
2027         else if (bc_tsf == 0)
2028                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2029                         "reset HW TSF and timers\n");
2030         else
2031                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2032                         "updated timers based on beacon TSF\n");
2033
2034         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2035                           "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
2036                           (unsigned long long) bc_tsf,
2037                           (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
2038         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
2039                 intval & AR5K_BEACON_PERIOD,
2040                 intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
2041                 intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
2042 }
2043
2044 /**
2045  * ath5k_beacon_config - Configure the beacon queues and interrupts
2046  *
2047  * @sc: struct ath5k_softc pointer we are operating on
2048  *
2049  * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
2050  * interrupts to detect TSF updates only.
2051  */
2052 static void
2053 ath5k_beacon_config(struct ath5k_softc *sc)
2054 {
2055         struct ath5k_hw *ah = sc->ah;
2056         unsigned long flags;
2057
2058         spin_lock_irqsave(&sc->block, flags);
2059         sc->bmisscount = 0;
2060         sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
2061
2062         if (sc->enable_beacon) {
2063                 /*
2064                  * In IBSS mode we use a self-linked tx descriptor and let the
2065                  * hardware send the beacons automatically. We have to load it
2066                  * only once here.
2067                  * We use the SWBA interrupt only to keep track of the beacon
2068                  * timers in order to detect automatic TSF updates.
2069                  */
2070                 ath5k_beaconq_config(sc);
2071
2072                 sc->imask |= AR5K_INT_SWBA;
2073
2074                 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2075                         if (ath5k_hw_hasveol(ah))
2076                                 ath5k_beacon_send(sc);
2077                 } else
2078                         ath5k_beacon_update_timers(sc, -1);
2079         } else {
2080                 ath5k_hw_stop_beacon_queue(sc->ah, sc->bhalq);
2081         }
2082
2083         ath5k_hw_set_imr(ah, sc->imask);
2084         mmiowb();
2085         spin_unlock_irqrestore(&sc->block, flags);
2086 }
2087
2088 static void ath5k_tasklet_beacon(unsigned long data)
2089 {
2090         struct ath5k_softc *sc = (struct ath5k_softc *) data;
2091
2092         /*
2093          * Software beacon alert--time to send a beacon.
2094          *
2095          * In IBSS mode we use this interrupt just to
2096          * keep track of the next TBTT (target beacon
2097          * transmission time) in order to detect wether
2098          * automatic TSF updates happened.
2099          */
2100         if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2101                 /* XXX: only if VEOL suppported */
2102                 u64 tsf = ath5k_hw_get_tsf64(sc->ah);
2103                 sc->nexttbtt += sc->bintval;
2104                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2105                                 "SWBA nexttbtt: %x hw_tu: %x "
2106                                 "TSF: %llx\n",
2107                                 sc->nexttbtt,
2108                                 TSF_TO_TU(tsf),
2109                                 (unsigned long long) tsf);
2110         } else {
2111                 spin_lock(&sc->block);
2112                 ath5k_beacon_send(sc);
2113                 spin_unlock(&sc->block);
2114         }
2115 }
2116
2117
2118 /********************\
2119 * Interrupt handling *
2120 \********************/
2121
2122 static void
2123 ath5k_intr_calibration_poll(struct ath5k_hw *ah)
2124 {
2125         if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
2126             !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) {
2127                 /* run ANI only when full calibration is not active */
2128                 ah->ah_cal_next_ani = jiffies +
2129                         msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
2130                 tasklet_schedule(&ah->ah_sc->ani_tasklet);
2131
2132         } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
2133                 ah->ah_cal_next_full = jiffies +
2134                         msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
2135                 tasklet_schedule(&ah->ah_sc->calib);
2136         }
2137         /* we could use SWI to generate enough interrupts to meet our
2138          * calibration interval requirements, if necessary:
2139          * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
2140 }
2141
2142 irqreturn_t
2143 ath5k_intr(int irq, void *dev_id)
2144 {
2145         struct ath5k_softc *sc = dev_id;
2146         struct ath5k_hw *ah = sc->ah;
2147         enum ath5k_int status;
2148         unsigned int counter = 1000;
2149
2150         if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
2151                 ((ath5k_get_bus_type(ah) != ATH_AHB) &&
2152                                 !ath5k_hw_is_intr_pending(ah))))
2153                 return IRQ_NONE;
2154
2155         do {
2156                 ath5k_hw_get_isr(ah, &status);          /* NB: clears IRQ too */
2157                 ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
2158                                 status, sc->imask);
2159                 if (unlikely(status & AR5K_INT_FATAL)) {
2160                         /*
2161                          * Fatal errors are unrecoverable.
2162                          * Typically these are caused by DMA errors.
2163                          */
2164                         ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2165                                   "fatal int, resetting\n");
2166                         ieee80211_queue_work(sc->hw, &sc->reset_work);
2167                 } else if (unlikely(status & AR5K_INT_RXORN)) {
2168                         /*
2169                          * Receive buffers are full. Either the bus is busy or
2170                          * the CPU is not fast enough to process all received
2171                          * frames.
2172                          * Older chipsets need a reset to come out of this
2173                          * condition, but we treat it as RX for newer chips.
2174                          * We don't know exactly which versions need a reset -
2175                          * this guess is copied from the HAL.
2176                          */
2177                         sc->stats.rxorn_intr++;
2178                         if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
2179                                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2180                                           "rx overrun, resetting\n");
2181                                 ieee80211_queue_work(sc->hw, &sc->reset_work);
2182                         }
2183                         else
2184                                 tasklet_schedule(&sc->rxtq);
2185                 } else {
2186                         if (status & AR5K_INT_SWBA) {
2187                                 tasklet_hi_schedule(&sc->beacontq);
2188                         }
2189                         if (status & AR5K_INT_RXEOL) {
2190                                 /*
2191                                 * NB: the hardware should re-read the link when
2192                                 *     RXE bit is written, but it doesn't work at
2193                                 *     least on older hardware revs.
2194                                 */
2195                                 sc->stats.rxeol_intr++;
2196                         }
2197                         if (status & AR5K_INT_TXURN) {
2198                                 /* bump tx trigger level */
2199                                 ath5k_hw_update_tx_triglevel(ah, true);
2200                         }
2201                         if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
2202                                 tasklet_schedule(&sc->rxtq);
2203                         if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
2204                                         | AR5K_INT_TXERR | AR5K_INT_TXEOL))
2205                                 tasklet_schedule(&sc->txtq);
2206                         if (status & AR5K_INT_BMISS) {
2207                                 /* TODO */
2208                         }
2209                         if (status & AR5K_INT_MIB) {
2210                                 sc->stats.mib_intr++;
2211                                 ath5k_hw_update_mib_counters(ah);
2212                                 ath5k_ani_mib_intr(ah);
2213                         }
2214                         if (status & AR5K_INT_GPIO)
2215                                 tasklet_schedule(&sc->rf_kill.toggleq);
2216
2217                 }
2218
2219                 if (ath5k_get_bus_type(ah) == ATH_AHB)
2220                         break;
2221
2222         } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
2223
2224         if (unlikely(!counter))
2225                 ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
2226
2227         ath5k_intr_calibration_poll(ah);
2228
2229         return IRQ_HANDLED;
2230 }
2231
2232 /*
2233  * Periodically recalibrate the PHY to account
2234  * for temperature/environment changes.
2235  */
2236 static void
2237 ath5k_tasklet_calibrate(unsigned long data)
2238 {
2239         struct ath5k_softc *sc = (void *)data;
2240         struct ath5k_hw *ah = sc->ah;
2241
2242         /* Only full calibration for now */
2243         ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
2244
2245         ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
2246                 ieee80211_frequency_to_channel(sc->curchan->center_freq),
2247                 sc->curchan->hw_value);
2248
2249         if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
2250                 /*
2251                  * Rfgain is out of bounds, reset the chip
2252                  * to load new gain values.
2253                  */
2254                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
2255                 ieee80211_queue_work(sc->hw, &sc->reset_work);
2256         }
2257         if (ath5k_hw_phy_calibrate(ah, sc->curchan))
2258                 ATH5K_ERR(sc, "calibration of channel %u failed\n",
2259                         ieee80211_frequency_to_channel(
2260                                 sc->curchan->center_freq));
2261
2262         /* Noise floor calibration interrupts rx/tx path while I/Q calibration
2263          * doesn't.
2264          * TODO: We should stop TX here, so that it doesn't interfere.
2265          * Note that stopping the queues is not enough to stop TX! */
2266         if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) {
2267                 ah->ah_cal_next_nf = jiffies +
2268                         msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF);
2269                 ath5k_hw_update_noise_floor(ah);
2270         }
2271
2272         ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
2273 }
2274
2275
2276 static void
2277 ath5k_tasklet_ani(unsigned long data)
2278 {
2279         struct ath5k_softc *sc = (void *)data;
2280         struct ath5k_hw *ah = sc->ah;
2281
2282         ah->ah_cal_mask |= AR5K_CALIBRATION_ANI;
2283         ath5k_ani_calibration(ah);
2284         ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI;
2285 }
2286
2287
2288 static void
2289 ath5k_tx_complete_poll_work(struct work_struct *work)
2290 {
2291         struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
2292                         tx_complete_work.work);
2293         struct ath5k_txq *txq;
2294         int i;
2295         bool needreset = false;
2296
2297         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
2298                 if (sc->txqs[i].setup) {
2299                         txq = &sc->txqs[i];
2300                         spin_lock_bh(&txq->lock);
2301                         if (txq->txq_len > 1) {
2302                                 if (txq->txq_poll_mark) {
2303                                         ATH5K_DBG(sc, ATH5K_DEBUG_XMIT,
2304                                                   "TX queue stuck %d\n",
2305                                                   txq->qnum);
2306                                         needreset = true;
2307                                         txq->txq_stuck++;
2308                                         spin_unlock_bh(&txq->lock);
2309                                         break;
2310                                 } else {
2311                                         txq->txq_poll_mark = true;
2312                                 }
2313                         }
2314                         spin_unlock_bh(&txq->lock);
2315                 }
2316         }
2317
2318         if (needreset) {
2319                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2320                           "TX queues stuck, resetting\n");
2321                 ath5k_reset(sc, NULL, true);
2322         }
2323
2324         ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
2325                 msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
2326 }
2327
2328
2329 /*************************\
2330 * Initialization routines *
2331 \*************************/
2332
2333 int
2334 ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
2335 {
2336         struct ieee80211_hw *hw = sc->hw;
2337         struct ath_common *common;
2338         int ret;
2339         int csz;
2340
2341         /* Initialize driver private data */
2342         SET_IEEE80211_DEV(hw, sc->dev);
2343         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
2344                         IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
2345                         IEEE80211_HW_SIGNAL_DBM |
2346                         IEEE80211_HW_REPORTS_TX_ACK_STATUS;
2347
2348         hw->wiphy->interface_modes =
2349                 BIT(NL80211_IFTYPE_AP) |
2350                 BIT(NL80211_IFTYPE_STATION) |
2351                 BIT(NL80211_IFTYPE_ADHOC) |
2352                 BIT(NL80211_IFTYPE_MESH_POINT);
2353
2354         hw->extra_tx_headroom = 2;
2355         hw->channel_change_time = 5000;
2356
2357         /*
2358          * Mark the device as detached to avoid processing
2359          * interrupts until setup is complete.
2360          */
2361         __set_bit(ATH_STAT_INVALID, sc->status);
2362
2363         sc->opmode = NL80211_IFTYPE_STATION;
2364         sc->bintval = 1000;
2365         mutex_init(&sc->lock);
2366         spin_lock_init(&sc->rxbuflock);
2367         spin_lock_init(&sc->txbuflock);
2368         spin_lock_init(&sc->block);
2369
2370
2371         /* Setup interrupt handler */
2372         ret = request_irq(sc->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
2373         if (ret) {
2374                 ATH5K_ERR(sc, "request_irq failed\n");
2375                 goto err;
2376         }
2377
2378         /* If we passed the test, malloc an ath5k_hw struct */
2379         sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
2380         if (!sc->ah) {
2381                 ret = -ENOMEM;
2382                 ATH5K_ERR(sc, "out of memory\n");
2383                 goto err_irq;
2384         }
2385
2386         sc->ah->ah_sc = sc;
2387         sc->ah->ah_iobase = sc->iobase;
2388         common = ath5k_hw_common(sc->ah);
2389         common->ops = &ath5k_common_ops;
2390         common->bus_ops = bus_ops;
2391         common->ah = sc->ah;
2392         common->hw = hw;
2393         common->priv = sc;
2394
2395         /*
2396          * Cache line size is used to size and align various
2397          * structures used to communicate with the hardware.
2398          */
2399         ath5k_read_cachesize(common, &csz);
2400         common->cachelsz = csz << 2; /* convert to bytes */
2401
2402         spin_lock_init(&common->cc_lock);
2403
2404         /* Initialize device */
2405         ret = ath5k_hw_init(sc);
2406         if (ret)
2407                 goto err_free_ah;
2408
2409         /* set up multi-rate retry capabilities */
2410         if (sc->ah->ah_version == AR5K_AR5212) {
2411                 hw->max_rates = 4;
2412                 hw->max_rate_tries = 11;
2413         }
2414
2415         hw->vif_data_size = sizeof(struct ath5k_vif);
2416
2417         /* Finish private driver data initialization */
2418         ret = ath5k_init(hw);
2419         if (ret)
2420                 goto err_ah;
2421
2422         ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
2423                         ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
2424                                         sc->ah->ah_mac_srev,
2425                                         sc->ah->ah_phy_revision);
2426
2427         if (!sc->ah->ah_single_chip) {
2428                 /* Single chip radio (!RF5111) */
2429                 if (sc->ah->ah_radio_5ghz_revision &&
2430                         !sc->ah->ah_radio_2ghz_revision) {
2431                         /* No 5GHz support -> report 2GHz radio */
2432                         if (!test_bit(AR5K_MODE_11A,
2433                                 sc->ah->ah_capabilities.cap_mode)) {
2434                                 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
2435                                         ath5k_chip_name(AR5K_VERSION_RAD,
2436                                                 sc->ah->ah_radio_5ghz_revision),
2437                                                 sc->ah->ah_radio_5ghz_revision);
2438                         /* No 2GHz support (5110 and some
2439                          * 5Ghz only cards) -> report 5Ghz radio */
2440                         } else if (!test_bit(AR5K_MODE_11B,
2441                                 sc->ah->ah_capabilities.cap_mode)) {
2442                                 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
2443                                         ath5k_chip_name(AR5K_VERSION_RAD,
2444                                                 sc->ah->ah_radio_5ghz_revision),
2445                                                 sc->ah->ah_radio_5ghz_revision);
2446                         /* Multiband radio */
2447                         } else {
2448                                 ATH5K_INFO(sc, "RF%s multiband radio found"
2449                                         " (0x%x)\n",
2450                                         ath5k_chip_name(AR5K_VERSION_RAD,
2451                                                 sc->ah->ah_radio_5ghz_revision),
2452                                                 sc->ah->ah_radio_5ghz_revision);
2453                         }
2454                 }
2455                 /* Multi chip radio (RF5111 - RF2111) ->
2456                  * report both 2GHz/5GHz radios */
2457                 else if (sc->ah->ah_radio_5ghz_revision &&
2458                                 sc->ah->ah_radio_2ghz_revision){
2459                         ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
2460                                 ath5k_chip_name(AR5K_VERSION_RAD,
2461                                         sc->ah->ah_radio_5ghz_revision),
2462                                         sc->ah->ah_radio_5ghz_revision);
2463                         ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
2464                                 ath5k_chip_name(AR5K_VERSION_RAD,
2465                                         sc->ah->ah_radio_2ghz_revision),
2466                                         sc->ah->ah_radio_2ghz_revision);
2467                 }
2468         }
2469
2470         ath5k_debug_init_device(sc);
2471
2472         /* ready to process interrupts */
2473         __clear_bit(ATH_STAT_INVALID, sc->status);
2474
2475         return 0;
2476 err_ah:
2477         ath5k_hw_deinit(sc->ah);
2478 err_free_ah:
2479         kfree(sc->ah);
2480 err_irq:
2481         free_irq(sc->irq, sc);
2482 err:
2483         return ret;
2484 }
2485
2486 static int
2487 ath5k_stop_locked(struct ath5k_softc *sc)
2488 {
2489         struct ath5k_hw *ah = sc->ah;
2490
2491         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
2492                         test_bit(ATH_STAT_INVALID, sc->status));
2493
2494         /*
2495          * Shutdown the hardware and driver:
2496          *    stop output from above
2497          *    disable interrupts
2498          *    turn off timers
2499          *    turn off the radio
2500          *    clear transmit machinery
2501          *    clear receive machinery
2502          *    drain and release tx queues
2503          *    reclaim beacon resources
2504          *    power down hardware
2505          *
2506          * Note that some of this work is not possible if the
2507          * hardware is gone (invalid).
2508          */
2509         ieee80211_stop_queues(sc->hw);
2510
2511         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2512                 ath5k_led_off(sc);
2513                 ath5k_hw_set_imr(ah, 0);
2514                 synchronize_irq(sc->irq);
2515                 ath5k_rx_stop(sc);
2516                 ath5k_hw_dma_stop(ah);
2517                 ath5k_drain_tx_buffs(sc);
2518                 ath5k_hw_phy_disable(ah);
2519         }
2520
2521         return 0;
2522 }
2523
2524 static int
2525 ath5k_init_hw(struct ath5k_softc *sc)
2526 {
2527         struct ath5k_hw *ah = sc->ah;
2528         struct ath_common *common = ath5k_hw_common(ah);
2529         int ret, i;
2530
2531         mutex_lock(&sc->lock);
2532
2533         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
2534
2535         /*
2536          * Stop anything previously setup.  This is safe
2537          * no matter this is the first time through or not.
2538          */
2539         ath5k_stop_locked(sc);
2540
2541         /*
2542          * The basic interface to setting the hardware in a good
2543          * state is ``reset''.  On return the hardware is known to
2544          * be powered up and with interrupts disabled.  This must
2545          * be followed by initialization of the appropriate bits
2546          * and then setup of the interrupt mask.
2547          */
2548         sc->curchan = sc->hw->conf.channel;
2549         sc->curband = &sc->sbands[sc->curchan->band];
2550         sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
2551                 AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
2552                 AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
2553
2554         ret = ath5k_reset(sc, NULL, false);
2555         if (ret)
2556                 goto done;
2557
2558         ath5k_rfkill_hw_start(ah);
2559
2560         /*
2561          * Reset the key cache since some parts do not reset the
2562          * contents on initial power up or resume from suspend.
2563          */
2564         for (i = 0; i < common->keymax; i++)
2565                 ath_hw_keyreset(common, (u16) i);
2566
2567         /* Use higher rates for acks instead of base
2568          * rate */
2569         ah->ah_ack_bitrate_high = true;
2570
2571         for (i = 0; i < ARRAY_SIZE(sc->bslot); i++)
2572                 sc->bslot[i] = NULL;
2573
2574         ret = 0;
2575 done:
2576         mmiowb();
2577         mutex_unlock(&sc->lock);
2578
2579         ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
2580                         msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
2581
2582         return ret;
2583 }
2584
2585 static void stop_tasklets(struct ath5k_softc *sc)
2586 {
2587         tasklet_kill(&sc->rxtq);
2588         tasklet_kill(&sc->txtq);
2589         tasklet_kill(&sc->calib);
2590         tasklet_kill(&sc->beacontq);
2591         tasklet_kill(&sc->ani_tasklet);
2592 }
2593
2594 /*
2595  * Stop the device, grabbing the top-level lock to protect
2596  * against concurrent entry through ath5k_init (which can happen
2597  * if another thread does a system call and the thread doing the
2598  * stop is preempted).
2599  */
2600 static int
2601 ath5k_stop_hw(struct ath5k_softc *sc)
2602 {
2603         int ret;
2604
2605         mutex_lock(&sc->lock);
2606         ret = ath5k_stop_locked(sc);
2607         if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
2608                 /*
2609                  * Don't set the card in full sleep mode!
2610                  *
2611                  * a) When the device is in this state it must be carefully
2612                  * woken up or references to registers in the PCI clock
2613                  * domain may freeze the bus (and system).  This varies
2614                  * by chip and is mostly an issue with newer parts
2615                  * (madwifi sources mentioned srev >= 0x78) that go to
2616                  * sleep more quickly.
2617                  *
2618                  * b) On older chips full sleep results a weird behaviour
2619                  * during wakeup. I tested various cards with srev < 0x78
2620                  * and they don't wake up after module reload, a second
2621                  * module reload is needed to bring the card up again.
2622                  *
2623                  * Until we figure out what's going on don't enable
2624                  * full chip reset on any chip (this is what Legacy HAL
2625                  * and Sam's HAL do anyway). Instead Perform a full reset
2626                  * on the device (same as initial state after attach) and
2627                  * leave it idle (keep MAC/BB on warm reset) */
2628                 ret = ath5k_hw_on_hold(sc->ah);
2629
2630                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2631                                 "putting device to sleep\n");
2632         }
2633
2634         mmiowb();
2635         mutex_unlock(&sc->lock);
2636
2637         stop_tasklets(sc);
2638
2639         cancel_delayed_work_sync(&sc->tx_complete_work);
2640
2641         ath5k_rfkill_hw_stop(sc->ah);
2642
2643         return ret;
2644 }
2645
2646 /*
2647  * Reset the hardware.  If chan is not NULL, then also pause rx/tx
2648  * and change to the given channel.
2649  *
2650  * This should be called with sc->lock.
2651  */
2652 static int
2653 ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
2654                                                         bool skip_pcu)
2655 {
2656         struct ath5k_hw *ah = sc->ah;
2657         int ret, ani_mode;
2658
2659         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
2660
2661         ath5k_hw_set_imr(ah, 0);
2662         synchronize_irq(sc->irq);
2663         stop_tasklets(sc);
2664
2665         /* Save ani mode and disable ANI durring
2666          * reset. If we don't we might get false
2667          * PHY error interrupts. */
2668         ani_mode = ah->ah_sc->ani_state.ani_mode;
2669         ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
2670
2671         /* We are going to empty hw queues
2672          * so we should also free any remaining
2673          * tx buffers */
2674         ath5k_drain_tx_buffs(sc);
2675         if (chan) {
2676                 sc->curchan = chan;
2677                 sc->curband = &sc->sbands[chan->band];
2678         }
2679         ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
2680                                                                 skip_pcu);
2681         if (ret) {
2682                 ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
2683                 goto err;
2684         }
2685
2686         ret = ath5k_rx_start(sc);
2687         if (ret) {
2688                 ATH5K_ERR(sc, "can't start recv logic\n");
2689                 goto err;
2690         }
2691
2692         ath5k_ani_init(ah, ani_mode);
2693
2694         ah->ah_cal_next_full = jiffies;
2695         ah->ah_cal_next_ani = jiffies;
2696         ah->ah_cal_next_nf = jiffies;
2697         ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
2698
2699         /*
2700          * Change channels and update the h/w rate map if we're switching;
2701          * e.g. 11a to 11b/g.
2702          *
2703          * We may be doing a reset in response to an ioctl that changes the
2704          * channel so update any state that might change as a result.
2705          *
2706          * XXX needed?
2707          */
2708 /*      ath5k_chan_change(sc, c); */
2709
2710         ath5k_beacon_config(sc);
2711         /* intrs are enabled by ath5k_beacon_config */
2712
2713         ieee80211_wake_queues(sc->hw);
2714
2715         return 0;
2716 err:
2717         return ret;
2718 }
2719
2720 static void ath5k_reset_work(struct work_struct *work)
2721 {
2722         struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
2723                 reset_work);
2724
2725         mutex_lock(&sc->lock);
2726         ath5k_reset(sc, NULL, true);
2727         mutex_unlock(&sc->lock);
2728 }
2729
2730 static int
2731 ath5k_init(struct ieee80211_hw *hw)
2732 {
2733
2734         struct ath5k_softc *sc = hw->priv;
2735         struct ath5k_hw *ah = sc->ah;
2736         struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
2737         struct ath5k_txq *txq;
2738         u8 mac[ETH_ALEN] = {};
2739         int ret;
2740
2741
2742         /*
2743          * Check if the MAC has multi-rate retry support.
2744          * We do this by trying to setup a fake extended
2745          * descriptor.  MACs that don't have support will
2746          * return false w/o doing anything.  MACs that do
2747          * support it will return true w/o doing anything.
2748          */
2749         ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
2750
2751         if (ret < 0)
2752                 goto err;
2753         if (ret > 0)
2754                 __set_bit(ATH_STAT_MRRETRY, sc->status);
2755
2756         /*
2757          * Collect the channel list.  The 802.11 layer
2758          * is resposible for filtering this list based
2759          * on settings like the phy mode and regulatory
2760          * domain restrictions.
2761          */
2762         ret = ath5k_setup_bands(hw);
2763         if (ret) {
2764                 ATH5K_ERR(sc, "can't get channels\n");
2765                 goto err;
2766         }
2767
2768         /* NB: setup here so ath5k_rate_update is happy */
2769         if (test_bit(AR5K_MODE_11A, ah->ah_modes))
2770                 ath5k_setcurmode(sc, AR5K_MODE_11A);
2771         else
2772                 ath5k_setcurmode(sc, AR5K_MODE_11B);
2773
2774         /*
2775          * Allocate tx+rx descriptors and populate the lists.
2776          */
2777         ret = ath5k_desc_alloc(sc);
2778         if (ret) {
2779                 ATH5K_ERR(sc, "can't allocate descriptors\n");
2780                 goto err;
2781         }
2782
2783         /*
2784          * Allocate hardware transmit queues: one queue for
2785          * beacon frames and one data queue for each QoS
2786          * priority.  Note that hw functions handle resetting
2787          * these queues at the needed time.
2788          */
2789         ret = ath5k_beaconq_setup(ah);
2790         if (ret < 0) {
2791                 ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
2792                 goto err_desc;
2793         }
2794         sc->bhalq = ret;
2795         sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
2796         if (IS_ERR(sc->cabq)) {
2797                 ATH5K_ERR(sc, "can't setup cab queue\n");
2798                 ret = PTR_ERR(sc->cabq);
2799                 goto err_bhal;
2800         }
2801
2802         /* 5211 and 5212 usually support 10 queues but we better rely on the
2803          * capability information */
2804         if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) {
2805                 /* This order matches mac80211's queue priority, so we can
2806                 * directly use the mac80211 queue number without any mapping */
2807                 txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
2808                 if (IS_ERR(txq)) {
2809                         ATH5K_ERR(sc, "can't setup xmit queue\n");
2810                         ret = PTR_ERR(txq);
2811                         goto err_queues;
2812                 }
2813                 txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
2814                 if (IS_ERR(txq)) {
2815                         ATH5K_ERR(sc, "can't setup xmit queue\n");
2816                         ret = PTR_ERR(txq);
2817                         goto err_queues;
2818                 }
2819                 txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
2820                 if (IS_ERR(txq)) {
2821                         ATH5K_ERR(sc, "can't setup xmit queue\n");
2822                         ret = PTR_ERR(txq);
2823                         goto err_queues;
2824                 }
2825                 txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
2826                 if (IS_ERR(txq)) {
2827                         ATH5K_ERR(sc, "can't setup xmit queue\n");
2828                         ret = PTR_ERR(txq);
2829                         goto err_queues;
2830                 }
2831                 hw->queues = 4;
2832         } else {
2833                 /* older hardware (5210) can only support one data queue */
2834                 txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
2835                 if (IS_ERR(txq)) {
2836                         ATH5K_ERR(sc, "can't setup xmit queue\n");
2837                         ret = PTR_ERR(txq);
2838                         goto err_queues;
2839                 }
2840                 hw->queues = 1;
2841         }
2842
2843         tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
2844         tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
2845         tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
2846         tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
2847         tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc);
2848
2849         INIT_WORK(&sc->reset_work, ath5k_reset_work);
2850         INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work);
2851
2852         ret = ath5k_eeprom_read_mac(ah, mac);
2853         if (ret) {
2854                 ATH5K_ERR(sc, "unable to read address from EEPROM\n");
2855                 goto err_queues;
2856         }
2857
2858         SET_IEEE80211_PERM_ADDR(hw, mac);
2859         memcpy(&sc->lladdr, mac, ETH_ALEN);
2860         /* All MAC address bits matter for ACKs */
2861         ath5k_update_bssid_mask_and_opmode(sc, NULL);
2862
2863         regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
2864         ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
2865         if (ret) {
2866                 ATH5K_ERR(sc, "can't initialize regulatory system\n");
2867                 goto err_queues;
2868         }
2869
2870         ret = ieee80211_register_hw(hw);
2871         if (ret) {
2872                 ATH5K_ERR(sc, "can't register ieee80211 hw\n");
2873                 goto err_queues;
2874         }
2875
2876         if (!ath_is_world_regd(regulatory))
2877                 regulatory_hint(hw->wiphy, regulatory->alpha2);
2878
2879         ath5k_init_leds(sc);
2880
2881         ath5k_sysfs_register(sc);
2882
2883         return 0;
2884 err_queues:
2885         ath5k_txq_release(sc);
2886 err_bhal:
2887         ath5k_hw_release_tx_queue(ah, sc->bhalq);
2888 err_desc:
2889         ath5k_desc_free(sc);
2890 err:
2891         return ret;
2892 }
2893
2894 void
2895 ath5k_deinit_softc(struct ath5k_softc *sc)
2896 {
2897         struct ieee80211_hw *hw = sc->hw;
2898
2899         /*
2900          * NB: the order of these is important:
2901          * o call the 802.11 layer before detaching ath5k_hw to
2902          *   ensure callbacks into the driver to delete global
2903          *   key cache entries can be handled
2904          * o reclaim the tx queue data structures after calling
2905          *   the 802.11 layer as we'll get called back to reclaim
2906          *   node state and potentially want to use them
2907          * o to cleanup the tx queues the hal is called, so detach
2908          *   it last
2909          * XXX: ??? detach ath5k_hw ???
2910          * Other than that, it's straightforward...
2911          */
2912         ath5k_debug_finish_device(sc);
2913         ieee80211_unregister_hw(hw);
2914         ath5k_desc_free(sc);
2915         ath5k_txq_release(sc);
2916         ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
2917         ath5k_unregister_leds(sc);
2918
2919         ath5k_sysfs_unregister(sc);
2920         /*
2921          * NB: can't reclaim these until after ieee80211_ifdetach
2922          * returns because we'll get called back to reclaim node
2923          * state and potentially want to use them.
2924          */
2925         ath5k_hw_deinit(sc->ah);
2926         free_irq(sc->irq, sc);
2927 }
2928
2929 /********************\
2930 * Mac80211 functions *
2931 \********************/
2932
2933 static int
2934 ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2935 {
2936         struct ath5k_softc *sc = hw->priv;
2937         u16 qnum = skb_get_queue_mapping(skb);
2938
2939         if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) {
2940                 dev_kfree_skb_any(skb);
2941                 return 0;
2942         }
2943
2944         return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]);
2945 }
2946
2947 static int ath5k_start(struct ieee80211_hw *hw)
2948 {
2949         return ath5k_init_hw(hw->priv);
2950 }
2951
2952 static void ath5k_stop(struct ieee80211_hw *hw)
2953 {
2954         ath5k_stop_hw(hw->priv);
2955 }
2956
2957 static int ath5k_add_interface(struct ieee80211_hw *hw,
2958                 struct ieee80211_vif *vif)
2959 {
2960         struct ath5k_softc *sc = hw->priv;
2961         int ret;
2962         struct ath5k_vif *avf = (void *)vif->drv_priv;
2963
2964         mutex_lock(&sc->lock);
2965
2966         if ((vif->type == NL80211_IFTYPE_AP ||
2967              vif->type == NL80211_IFTYPE_ADHOC)
2968             && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) {
2969                 ret = -ELNRNG;
2970                 goto end;
2971         }
2972
2973         /* Don't allow other interfaces if one ad-hoc is configured.
2974          * TODO: Fix the problems with ad-hoc and multiple other interfaces.
2975          * We would need to operate the HW in ad-hoc mode to allow TSF updates
2976          * for the IBSS, but this breaks with additional AP or STA interfaces
2977          * at the moment. */
2978         if (sc->num_adhoc_vifs ||
2979             (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
2980                 ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n");
2981                 ret = -ELNRNG;
2982                 goto end;
2983         }
2984
2985         switch (vif->type) {
2986         case NL80211_IFTYPE_AP:
2987         case NL80211_IFTYPE_STATION:
2988         case NL80211_IFTYPE_ADHOC:
2989         case NL80211_IFTYPE_MESH_POINT:
2990                 avf->opmode = vif->type;
2991                 break;
2992         default:
2993                 ret = -EOPNOTSUPP;
2994                 goto end;
2995         }
2996
2997         sc->nvifs++;
2998         ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode);
2999
3000         /* Assign the vap/adhoc to a beacon xmit slot. */
3001         if ((avf->opmode == NL80211_IFTYPE_AP) ||
3002             (avf->opmode == NL80211_IFTYPE_ADHOC) ||
3003             (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
3004                 int slot;
3005
3006                 WARN_ON(list_empty(&sc->bcbuf));
3007                 avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf,
3008                                              list);
3009                 list_del(&avf->bbuf->list);
3010
3011                 avf->bslot = 0;
3012                 for (slot = 0; slot < ATH_BCBUF; slot++) {
3013                         if (!sc->bslot[slot]) {
3014                                 avf->bslot = slot;
3015                                 break;
3016                         }
3017                 }
3018                 BUG_ON(sc->bslot[avf->bslot] != NULL);
3019                 sc->bslot[avf->bslot] = vif;
3020                 if (avf->opmode == NL80211_IFTYPE_AP)
3021                         sc->num_ap_vifs++;
3022                 else if (avf->opmode == NL80211_IFTYPE_ADHOC)
3023                         sc->num_adhoc_vifs++;
3024         }
3025
3026         /* Any MAC address is fine, all others are included through the
3027          * filter.
3028          */
3029         memcpy(&sc->lladdr, vif->addr, ETH_ALEN);
3030         ath5k_hw_set_lladdr(sc->ah, vif->addr);
3031
3032         memcpy(&avf->lladdr, vif->addr, ETH_ALEN);
3033
3034         ath5k_mode_setup(sc, vif);
3035
3036         ret = 0;
3037 end:
3038         mutex_unlock(&sc->lock);
3039         return ret;
3040 }
3041
3042 static void
3043 ath5k_remove_interface(struct ieee80211_hw *hw,
3044                         struct ieee80211_vif *vif)
3045 {
3046         struct ath5k_softc *sc = hw->priv;
3047         struct ath5k_vif *avf = (void *)vif->drv_priv;
3048         unsigned int i;
3049
3050         mutex_lock(&sc->lock);
3051         sc->nvifs--;
3052
3053         if (avf->bbuf) {
3054                 ath5k_txbuf_free_skb(sc, avf->bbuf);
3055                 list_add_tail(&avf->bbuf->list, &sc->bcbuf);
3056                 for (i = 0; i < ATH_BCBUF; i++) {
3057                         if (sc->bslot[i] == vif) {
3058                                 sc->bslot[i] = NULL;
3059                                 break;
3060                         }
3061                 }
3062                 avf->bbuf = NULL;
3063         }
3064         if (avf->opmode == NL80211_IFTYPE_AP)
3065                 sc->num_ap_vifs--;
3066         else if (avf->opmode == NL80211_IFTYPE_ADHOC)
3067                 sc->num_adhoc_vifs--;
3068
3069         ath5k_update_bssid_mask_and_opmode(sc, NULL);
3070         mutex_unlock(&sc->lock);
3071 }
3072
3073 /*
3074  * TODO: Phy disable/diversity etc
3075  */
3076 static int
3077 ath5k_config(struct ieee80211_hw *hw, u32 changed)
3078 {
3079         struct ath5k_softc *sc = hw->priv;
3080         struct ath5k_hw *ah = sc->ah;
3081         struct ieee80211_conf *conf = &hw->conf;
3082         int ret = 0;
3083
3084         mutex_lock(&sc->lock);
3085
3086         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
3087                 ret = ath5k_chan_set(sc, conf->channel);
3088                 if (ret < 0)
3089                         goto unlock;
3090         }
3091
3092         if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
3093         (sc->power_level != conf->power_level)) {
3094                 sc->power_level = conf->power_level;
3095
3096                 /* Half dB steps */
3097                 ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
3098         }
3099
3100         /* TODO:
3101          * 1) Move this on config_interface and handle each case
3102          * separately eg. when we have only one STA vif, use
3103          * AR5K_ANTMODE_SINGLE_AP
3104          *
3105          * 2) Allow the user to change antenna mode eg. when only
3106          * one antenna is present
3107          *
3108          * 3) Allow the user to set default/tx antenna when possible
3109          *
3110          * 4) Default mode should handle 90% of the cases, together
3111          * with fixed a/b and single AP modes we should be able to
3112          * handle 99%. Sectored modes are extreme cases and i still
3113          * haven't found a usage for them. If we decide to support them,
3114          * then we must allow the user to set how many tx antennas we
3115          * have available
3116          */
3117         ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
3118
3119 unlock:
3120         mutex_unlock(&sc->lock);
3121         return ret;
3122 }
3123
3124 static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
3125                                    struct netdev_hw_addr_list *mc_list)
3126 {
3127         u32 mfilt[2], val;
3128         u8 pos;
3129         struct netdev_hw_addr *ha;
3130
3131         mfilt[0] = 0;
3132         mfilt[1] = 1;
3133
3134         netdev_hw_addr_list_for_each(ha, mc_list) {
3135                 /* calculate XOR of eight 6-bit values */
3136                 val = get_unaligned_le32(ha->addr + 0);
3137                 pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
3138                 val = get_unaligned_le32(ha->addr + 3);
3139                 pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
3140                 pos &= 0x3f;
3141                 mfilt[pos / 32] |= (1 << (pos % 32));
3142                 /* XXX: we might be able to just do this instead,
3143                 * but not sure, needs testing, if we do use this we'd
3144                 * neet to inform below to not reset the mcast */
3145                 /* ath5k_hw_set_mcast_filterindex(ah,
3146                  *      ha->addr[5]); */
3147         }
3148
3149         return ((u64)(mfilt[1]) << 32) | mfilt[0];
3150 }
3151
3152 static bool ath_any_vif_assoc(struct ath5k_softc *sc)
3153 {
3154         struct ath_vif_iter_data iter_data;
3155         iter_data.hw_macaddr = NULL;
3156         iter_data.any_assoc = false;
3157         iter_data.need_set_hw_addr = false;
3158         iter_data.found_active = true;
3159
3160         ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter,
3161                                                    &iter_data);
3162         return iter_data.any_assoc;
3163 }
3164
3165 #define SUPPORTED_FIF_FLAGS \
3166         FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
3167         FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
3168         FIF_BCN_PRBRESP_PROMISC
3169 /*
3170  * o always accept unicast, broadcast, and multicast traffic
3171  * o multicast traffic for all BSSIDs will be enabled if mac80211
3172  *   says it should be
3173  * o maintain current state of phy ofdm or phy cck error reception.
3174  *   If the hardware detects any of these type of errors then
3175  *   ath5k_hw_get_rx_filter() will pass to us the respective
3176  *   hardware filters to be able to receive these type of frames.
3177  * o probe request frames are accepted only when operating in
3178  *   hostap, adhoc, or monitor modes
3179  * o enable promiscuous mode according to the interface state
3180  * o accept beacons:
3181  *   - when operating in adhoc mode so the 802.11 layer creates
3182  *     node table entries for peers,
3183  *   - when operating in station mode for collecting rssi data when
3184  *     the station is otherwise quiet, or
3185  *   - when scanning
3186  */
3187 static void ath5k_configure_filter(struct ieee80211_hw *hw,
3188                 unsigned int changed_flags,
3189                 unsigned int *new_flags,
3190                 u64 multicast)
3191 {
3192         struct ath5k_softc *sc = hw->priv;
3193         struct ath5k_hw *ah = sc->ah;
3194         u32 mfilt[2], rfilt;
3195
3196         mutex_lock(&sc->lock);
3197
3198         mfilt[0] = multicast;
3199         mfilt[1] = multicast >> 32;
3200
3201         /* Only deal with supported flags */
3202         changed_flags &= SUPPORTED_FIF_FLAGS;
3203         *new_flags &= SUPPORTED_FIF_FLAGS;
3204
3205         /* If HW detects any phy or radar errors, leave those filters on.
3206          * Also, always enable Unicast, Broadcasts and Multicast
3207          * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
3208         rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
3209                 (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
3210                 AR5K_RX_FILTER_MCAST);
3211
3212         if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
3213                 if (*new_flags & FIF_PROMISC_IN_BSS) {
3214                         __set_bit(ATH_STAT_PROMISC, sc->status);
3215                 } else {
3216                         __clear_bit(ATH_STAT_PROMISC, sc->status);
3217                 }
3218         }
3219
3220         if (test_bit(ATH_STAT_PROMISC, sc->status))
3221                 rfilt |= AR5K_RX_FILTER_PROM;
3222
3223         /* Note, AR5K_RX_FILTER_MCAST is already enabled */
3224         if (*new_flags & FIF_ALLMULTI) {
3225                 mfilt[0] =  ~0;
3226                 mfilt[1] =  ~0;
3227         }
3228
3229         /* This is the best we can do */
3230         if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
3231                 rfilt |= AR5K_RX_FILTER_PHYERR;
3232
3233         /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
3234         * and probes for any BSSID */
3235         if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1))
3236                 rfilt |= AR5K_RX_FILTER_BEACON;
3237
3238         /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
3239          * set we should only pass on control frames for this
3240          * station. This needs testing. I believe right now this
3241          * enables *all* control frames, which is OK.. but
3242          * but we should see if we can improve on granularity */
3243         if (*new_flags & FIF_CONTROL)
3244                 rfilt |= AR5K_RX_FILTER_CONTROL;
3245
3246         /* Additional settings per mode -- this is per ath5k */
3247
3248         /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
3249
3250         switch (sc->opmode) {
3251         case NL80211_IFTYPE_MESH_POINT:
3252                 rfilt |= AR5K_RX_FILTER_CONTROL |
3253                          AR5K_RX_FILTER_BEACON |
3254                          AR5K_RX_FILTER_PROBEREQ |
3255                          AR5K_RX_FILTER_PROM;
3256                 break;
3257         case NL80211_IFTYPE_AP:
3258         case NL80211_IFTYPE_ADHOC:
3259                 rfilt |= AR5K_RX_FILTER_PROBEREQ |
3260                          AR5K_RX_FILTER_BEACON;
3261                 break;
3262         case NL80211_IFTYPE_STATION:
3263                 if (sc->assoc)
3264                         rfilt |= AR5K_RX_FILTER_BEACON;
3265         default:
3266                 break;
3267         }
3268
3269         /* Set filters */
3270         ath5k_hw_set_rx_filter(ah, rfilt);
3271
3272         /* Set multicast bits */
3273         ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
3274         /* Set the cached hw filter flags, this will later actually
3275          * be set in HW */
3276         sc->filter_flags = rfilt;
3277
3278         mutex_unlock(&sc->lock);
3279 }
3280
3281 static int
3282 ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
3283               struct ieee80211_vif *vif, struct ieee80211_sta *sta,
3284               struct ieee80211_key_conf *key)
3285 {
3286         struct ath5k_softc *sc = hw->priv;
3287         struct ath5k_hw *ah = sc->ah;
3288         struct ath_common *common = ath5k_hw_common(ah);
3289         int ret = 0;
3290
3291         if (modparam_nohwcrypt)
3292                 return -EOPNOTSUPP;
3293
3294         switch (key->cipher) {
3295         case WLAN_CIPHER_SUITE_WEP40:
3296         case WLAN_CIPHER_SUITE_WEP104:
3297         case WLAN_CIPHER_SUITE_TKIP:
3298                 break;
3299         case WLAN_CIPHER_SUITE_CCMP:
3300                 if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
3301                         break;
3302                 return -EOPNOTSUPP;
3303         default:
3304                 WARN_ON(1);
3305                 return -EINVAL;
3306         }
3307
3308         mutex_lock(&sc->lock);
3309
3310         switch (cmd) {
3311         case SET_KEY:
3312                 ret = ath_key_config(common, vif, sta, key);
3313                 if (ret >= 0) {
3314                         key->hw_key_idx = ret;
3315                         /* push IV and Michael MIC generation to stack */
3316                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3317                         if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
3318                                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
3319                         if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
3320                                 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
3321                         ret = 0;
3322                 }
3323                 break;
3324         case DISABLE_KEY:
3325                 ath_key_delete(common, key);
3326                 break;
3327         default:
3328                 ret = -EINVAL;
3329         }
3330
3331         mmiowb();
3332         mutex_unlock(&sc->lock);
3333         return ret;
3334 }
3335
3336 static int
3337 ath5k_get_stats(struct ieee80211_hw *hw,
3338                 struct ieee80211_low_level_stats *stats)
3339 {
3340         struct ath5k_softc *sc = hw->priv;
3341
3342         /* Force update */
3343         ath5k_hw_update_mib_counters(sc->ah);
3344
3345         stats->dot11ACKFailureCount = sc->stats.ack_fail;
3346         stats->dot11RTSFailureCount = sc->stats.rts_fail;
3347         stats->dot11RTSSuccessCount = sc->stats.rts_ok;
3348         stats->dot11FCSErrorCount = sc->stats.fcs_error;
3349
3350         return 0;
3351 }
3352
3353 static int ath5k_get_survey(struct ieee80211_hw *hw, int idx,
3354                 struct survey_info *survey)
3355 {
3356         struct ath5k_softc *sc = hw->priv;
3357         struct ieee80211_conf *conf = &hw->conf;
3358         struct ath_common *common = ath5k_hw_common(sc->ah);
3359         struct ath_cycle_counters *cc = &common->cc_survey;
3360         unsigned int div = common->clockrate * 1000;
3361
3362         if (idx != 0)
3363                 return -ENOENT;
3364
3365         survey->channel = conf->channel;
3366         survey->filled = SURVEY_INFO_NOISE_DBM;
3367         survey->noise = sc->ah->ah_noise_floor;
3368
3369         spin_lock_bh(&common->cc_lock);
3370         ath_hw_cycle_counters_update(common);
3371         if (cc->cycles > 0) {
3372                 survey->filled |= SURVEY_INFO_CHANNEL_TIME |
3373                         SURVEY_INFO_CHANNEL_TIME_BUSY |
3374                         SURVEY_INFO_CHANNEL_TIME_RX |
3375                         SURVEY_INFO_CHANNEL_TIME_TX;
3376                 survey->channel_time += cc->cycles / div;
3377                 survey->channel_time_busy += cc->rx_busy / div;
3378                 survey->channel_time_rx += cc->rx_frame / div;
3379                 survey->channel_time_tx += cc->tx_frame / div;
3380         }
3381         memset(cc, 0, sizeof(*cc));
3382         spin_unlock_bh(&common->cc_lock);
3383
3384         return 0;
3385 }
3386
3387 static u64
3388 ath5k_get_tsf(struct ieee80211_hw *hw)
3389 {
3390         struct ath5k_softc *sc = hw->priv;
3391
3392         return ath5k_hw_get_tsf64(sc->ah);
3393 }
3394
3395 static void
3396 ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
3397 {
3398         struct ath5k_softc *sc = hw->priv;
3399
3400         ath5k_hw_set_tsf64(sc->ah, tsf);
3401 }
3402
3403 static void
3404 ath5k_reset_tsf(struct ieee80211_hw *hw)
3405 {
3406         struct ath5k_softc *sc = hw->priv;
3407
3408         /*
3409          * in IBSS mode we need to update the beacon timers too.
3410          * this will also reset the TSF if we call it with 0
3411          */
3412         if (sc->opmode == NL80211_IFTYPE_ADHOC)
3413                 ath5k_beacon_update_timers(sc, 0);
3414         else
3415                 ath5k_hw_reset_tsf(sc->ah);
3416 }
3417
3418 static void
3419 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
3420 {
3421         struct ath5k_softc *sc = hw->priv;
3422         struct ath5k_hw *ah = sc->ah;
3423         u32 rfilt;
3424         rfilt = ath5k_hw_get_rx_filter(ah);
3425         if (enable)
3426                 rfilt |= AR5K_RX_FILTER_BEACON;
3427         else
3428                 rfilt &= ~AR5K_RX_FILTER_BEACON;
3429         ath5k_hw_set_rx_filter(ah, rfilt);
3430         sc->filter_flags = rfilt;
3431 }
3432
3433 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
3434                                     struct ieee80211_vif *vif,
3435                                     struct ieee80211_bss_conf *bss_conf,
3436                                     u32 changes)
3437 {
3438         struct ath5k_vif *avf = (void *)vif->drv_priv;
3439         struct ath5k_softc *sc = hw->priv;
3440         struct ath5k_hw *ah = sc->ah;
3441         struct ath_common *common = ath5k_hw_common(ah);
3442         unsigned long flags;
3443
3444         mutex_lock(&sc->lock);
3445
3446         if (changes & BSS_CHANGED_BSSID) {
3447                 /* Cache for later use during resets */
3448                 memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
3449                 common->curaid = 0;
3450                 ath5k_hw_set_bssid(ah);
3451                 mmiowb();
3452         }
3453
3454         if (changes & BSS_CHANGED_BEACON_INT)
3455                 sc->bintval = bss_conf->beacon_int;
3456
3457         if (changes & BSS_CHANGED_ASSOC) {
3458                 avf->assoc = bss_conf->assoc;
3459                 if (bss_conf->assoc)
3460                         sc->assoc = bss_conf->assoc;
3461                 else
3462                         sc->assoc = ath_any_vif_assoc(sc);
3463
3464                 if (sc->opmode == NL80211_IFTYPE_STATION)
3465                         set_beacon_filter(hw, sc->assoc);
3466                 ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
3467                         AR5K_LED_ASSOC : AR5K_LED_INIT);
3468                 if (bss_conf->assoc) {
3469                         ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
3470                                   "Bss Info ASSOC %d, bssid: %pM\n",
3471                                   bss_conf->aid, common->curbssid);
3472                         common->curaid = bss_conf->aid;
3473                         ath5k_hw_set_bssid(ah);
3474                         /* Once ANI is available you would start it here */
3475                 }
3476         }
3477
3478         if (changes & BSS_CHANGED_BEACON) {
3479                 spin_lock_irqsave(&sc->block, flags);
3480                 ath5k_beacon_update(hw, vif);
3481                 spin_unlock_irqrestore(&sc->block, flags);
3482         }
3483
3484         if (changes & BSS_CHANGED_BEACON_ENABLED)
3485                 sc->enable_beacon = bss_conf->enable_beacon;
3486
3487         if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
3488                        BSS_CHANGED_BEACON_INT))
3489                 ath5k_beacon_config(sc);
3490
3491         mutex_unlock(&sc->lock);
3492 }
3493
3494 static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
3495 {
3496         struct ath5k_softc *sc = hw->priv;
3497         if (!sc->assoc)
3498                 ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
3499 }
3500
3501 static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
3502 {
3503         struct ath5k_softc *sc = hw->priv;
3504         ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
3505                 AR5K_LED_ASSOC : AR5K_LED_INIT);
3506 }
3507
3508 /**
3509  * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
3510  *
3511  * @hw: struct ieee80211_hw pointer
3512  * @coverage_class: IEEE 802.11 coverage class number
3513  *
3514  * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
3515  * coverage class. The values are persistent, they are restored after device
3516  * reset.
3517  */
3518 static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
3519 {
3520         struct ath5k_softc *sc = hw->priv;
3521
3522         mutex_lock(&sc->lock);
3523         ath5k_hw_set_coverage_class(sc->ah, coverage_class);
3524         mutex_unlock(&sc->lock);
3525 }
3526
3527 static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue,
3528                          const struct ieee80211_tx_queue_params *params)
3529 {
3530         struct ath5k_softc *sc = hw->priv;
3531         struct ath5k_hw *ah = sc->ah;
3532         struct ath5k_txq_info qi;
3533         int ret = 0;
3534
3535         if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
3536                 return 0;
3537
3538         mutex_lock(&sc->lock);
3539
3540         ath5k_hw_get_tx_queueprops(ah, queue, &qi);
3541
3542         qi.tqi_aifs = params->aifs;
3543         qi.tqi_cw_min = params->cw_min;
3544         qi.tqi_cw_max = params->cw_max;
3545         qi.tqi_burst_time = params->txop;
3546
3547         ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
3548                   "Configure tx [queue %d],  "
3549                   "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
3550                   queue, params->aifs, params->cw_min,
3551                   params->cw_max, params->txop);
3552
3553         if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
3554                 ATH5K_ERR(sc,
3555                           "Unable to update hardware queue %u!\n", queue);
3556                 ret = -EIO;
3557         } else
3558                 ath5k_hw_reset_tx_queue(ah, queue);
3559
3560         mutex_unlock(&sc->lock);
3561
3562         return ret;
3563 }
3564
3565 static int ath5k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
3566 {
3567         struct ath5k_softc *sc = hw->priv;
3568
3569         if (tx_ant == 1 && rx_ant == 1)
3570                 ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_A);
3571         else if (tx_ant == 2 && rx_ant == 2)
3572                 ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_B);
3573         else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3)
3574                 ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_DEFAULT);
3575         else
3576                 return -EINVAL;
3577         return 0;
3578 }
3579
3580 static int ath5k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
3581 {
3582         struct ath5k_softc *sc = hw->priv;
3583
3584         switch (sc->ah->ah_ant_mode) {
3585         case AR5K_ANTMODE_FIXED_A:
3586                 *tx_ant = 1; *rx_ant = 1; break;
3587         case AR5K_ANTMODE_FIXED_B:
3588                 *tx_ant = 2; *rx_ant = 2; break;
3589         case AR5K_ANTMODE_DEFAULT:
3590                 *tx_ant = 3; *rx_ant = 3; break;
3591         }
3592         return 0;
3593 }
3594
3595 const struct ieee80211_ops ath5k_hw_ops = {
3596         .tx             = ath5k_tx,
3597         .start          = ath5k_start,
3598         .stop           = ath5k_stop,
3599         .add_interface  = ath5k_add_interface,
3600         .remove_interface = ath5k_remove_interface,
3601         .config         = ath5k_config,
3602         .prepare_multicast = ath5k_prepare_multicast,
3603         .configure_filter = ath5k_configure_filter,
3604         .set_key        = ath5k_set_key,
3605         .get_stats      = ath5k_get_stats,
3606         .get_survey     = ath5k_get_survey,
3607         .conf_tx        = ath5k_conf_tx,
3608         .get_tsf        = ath5k_get_tsf,
3609         .set_tsf        = ath5k_set_tsf,
3610         .reset_tsf      = ath5k_reset_tsf,
3611         .bss_info_changed = ath5k_bss_info_changed,
3612         .sw_scan_start  = ath5k_sw_scan_start,
3613         .sw_scan_complete = ath5k_sw_scan_complete,
3614         .set_coverage_class = ath5k_set_coverage_class,
3615         .set_antenna    = ath5k_set_antenna,
3616         .get_antenna    = ath5k_get_antenna,
3617 };