drivers/net/wireless/at76c50x-usb.c

   1 /*
   2  * at76c503/at76c505 USB driver
   3  *
   4  * Copyright (c) 2002 - 2003 Oliver Kurth
   5  * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
   6  * Copyright (c) 2004 Nick Jones
   7  * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
   8  * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
   9  * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This file is part of the Berlios driver for WLAN USB devices based on the
  17  * Atmel AT76C503A/505/505A.
  18  *
  19  * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
  20  *
  21  * TODO list is at the wiki:
  22  *
  23  * http://wireless.kernel.org/en/users/Drivers/at76c50x-usb#TODO
  24  *
  25  */
  26
  27 #include <linux/init.h>
  28 #include <linux/kernel.h>
  29 #include <linux/sched.h>
  30 #include <linux/errno.h>
  31 #include <linux/slab.h>
  32 #include <linux/module.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/list.h>
  35 #include <linux/usb.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/if_arp.h>
  38 #include <linux/etherdevice.h>
  39 #include <linux/ethtool.h>
  40 #include <linux/wireless.h>
  41 #include <net/iw_handler.h>
  42 #include <net/ieee80211_radiotap.h>
  43 #include <linux/firmware.h>
  44 #include <linux/leds.h>
  45 #include <net/mac80211.h>
  46
  47 #include "at76c50x-usb.h"
  48
  49 /* Version information */
  50 #define DRIVER_NAME "at76c50x-usb"
  51 #define DRIVER_VERSION  "0.17"
  52 #define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
  53
  54 /* at76_debug bits */
  55 #define DBG_PROGRESS            0x00000001      /* authentication/accociation */
  56 #define DBG_BSS_TABLE           0x00000002      /* show BSS table after scans */
  57 #define DBG_IOCTL               0x00000004      /* ioctl calls / settings */
  58 #define DBG_MAC_STATE           0x00000008      /* MAC state transitions */
  59 #define DBG_TX_DATA             0x00000010      /* tx header */
  60 #define DBG_TX_DATA_CONTENT     0x00000020      /* tx content */
  61 #define DBG_TX_MGMT             0x00000040      /* tx management */
  62 #define DBG_RX_DATA             0x00000080      /* rx data header */
  63 #define DBG_RX_DATA_CONTENT     0x00000100      /* rx data content */
  64 #define DBG_RX_MGMT             0x00000200      /* rx mgmt frame headers */
  65 #define DBG_RX_BEACON           0x00000400      /* rx beacon */
  66 #define DBG_RX_CTRL             0x00000800      /* rx control */
  67 #define DBG_RX_MGMT_CONTENT     0x00001000      /* rx mgmt content */
  68 #define DBG_RX_FRAGS            0x00002000      /* rx data fragment handling */
  69 #define DBG_DEVSTART            0x00004000      /* fw download, device start */
  70 #define DBG_URB                 0x00008000      /* rx urb status, ... */
  71 #define DBG_RX_ATMEL_HDR        0x00010000      /* Atmel-specific Rx headers */
  72 #define DBG_PROC_ENTRY          0x00020000      /* procedure entries/exits */
  73 #define DBG_PM                  0x00040000      /* power management settings */
  74 #define DBG_BSS_MATCH           0x00080000      /* BSS match failures */
  75 #define DBG_PARAMS              0x00100000      /* show configured parameters */
  76 #define DBG_WAIT_COMPLETE       0x00200000      /* command completion */
  77 #define DBG_RX_FRAGS_SKB        0x00400000      /* skb header of Rx fragments */
  78 #define DBG_BSS_TABLE_RM        0x00800000      /* purging bss table entries */
  79 #define DBG_MONITOR_MODE        0x01000000      /* monitor mode */
  80 #define DBG_MIB                 0x02000000      /* dump all MIBs on startup */
  81 #define DBG_MGMT_TIMER          0x04000000      /* dump mgmt_timer ops */
  82 #define DBG_WE_EVENTS           0x08000000      /* dump wireless events */
  83 #define DBG_FW                  0x10000000      /* firmware download */
  84 #define DBG_DFU                 0x20000000      /* device firmware upgrade */
  85 #define DBG_CMD                 0x40000000
  86 #define DBG_MAC80211            0x80000000
  87
  88 #define DBG_DEFAULTS            0
  89
  90 /* Use our own dbg macro */
  91 #define at76_dbg(bits, format, arg...) \
  92         do { \
  93                 if (at76_debug & (bits))                                 \
  94                         printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , \
  95                                ## arg);                                  \
  96         } while (0)
  97
  98 #define at76_dbg_dump(bits, buf, len, format, arg...)   \
  99         do { \
 100                 if (at76_debug & (bits)) { \
 101                         printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , \
 102                                ## arg);                                  \
 103                         print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,     \
 104                                              buf, len);                  \
 105                 }                                                        \
 106         } while (0)
 107
 108 static uint at76_debug = DBG_DEFAULTS;
 109
 110 /* Protect against concurrent firmware loading and parsing */
 111 static struct mutex fw_mutex;
 112
 113 static struct fwentry firmwares[] = {
 114         [0] = { "" },
 115         [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
 116         [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
 117         [BOARD_503] = { "atmel_at76c503-rfmd.bin" },
 118         [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
 119         [BOARD_505] = { "atmel_at76c505-rfmd.bin" },
 120         [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
 121         [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
 122         [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
 123 };
 124
 125 #define USB_DEVICE_DATA(__ops)  .driver_info = (kernel_ulong_t)(__ops)
 126
 127 static struct usb_device_id dev_table[] = {
 128         /*
 129          * at76c503-i3861
 130          */
 131         /* Generic AT76C503/3861 device */
 132         { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 133         /* Linksys WUSB11 v2.1/v2.6 */
 134         { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 135         /* Netgear MA101 rev. A */
 136         { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 137         /* Tekram U300C / Allnet ALL0193 */
 138         { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 139         /* HP HN210W J7801A */
 140         { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 141         /* Sitecom/Z-Com/Zyxel M4Y-750 */
 142         { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 143         /* Dynalink/Askey WLL013 (intersil) */
 144         { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 145         /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
 146         { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 147         /* BenQ AWL300 */
 148         { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 149         /* Addtron AWU-120, Compex WLU11 */
 150         { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 151         /* Intel AP310 AnyPoint II USB */
 152         { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 153         /* Dynalink L11U */
 154         { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 155         /* Arescom WL-210, FCC id 07J-GL2411USB */
 156         { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 157         /* I-O DATA WN-B11/USB */
 158         { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 159         /* BT Voyager 1010 */
 160         { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
 161         /*
 162          * at76c503-i3863
 163          */
 164         /* Generic AT76C503/3863 device */
 165         { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
 166         /* Samsung SWL-2100U */
 167         { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
 168         /*
 169          * at76c503-rfmd
 170          */
 171         /* Generic AT76C503/RFMD device */
 172         { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
 173         /* Dynalink/Askey WLL013 (rfmd) */
 174         { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
 175         /* Linksys WUSB11 v2.6 */
 176         { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
 177         /* Network Everywhere NWU11B */
 178         { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
 179         /* Netgear MA101 rev. B */
 180         { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
 181         /* D-Link DWL-120 rev. E */
 182         { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
 183         /* Actiontec 802UAT1, HWU01150-01UK */
 184         { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
 185         /* AirVast W-Buddie WN210 */
 186         { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
 187         /* Dick Smith Electronics XH1153 802.11b USB adapter */
 188         { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
 189         /* CNet CNUSB611 */
 190         { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
 191         /* FiberLine FL-WL200U */
 192         { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
 193         /* BenQ AWL400 USB stick */
 194         { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
 195         /* 3Com 3CRSHEW696 */
 196         { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
 197         /* Siemens Santis ADSL WLAN USB adapter WLL 013 */
 198         { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
 199         /* Belkin F5D6050, version 2 */
 200         { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
 201         /* iBlitzz, BWU613 (not *B or *SB) */
 202         { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
 203         /* Gigabyte GN-WLBM101 */
 204         { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
 205         /* Planex GW-US11S */
 206         { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
 207         /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
 208         { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
 209         /* Corega Wireless LAN USB-11 mini */
 210         { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
 211         /* Corega Wireless LAN USB-11 mini2 */
 212         { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
 213         /* Uniden PCW100 */
 214         { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
 215         /*
 216          * at76c503-rfmd-acc
 217          */
 218         /* SMC2664W */
 219         { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
 220         /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
 221         { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
 222         /*
 223          * at76c505-rfmd
 224          */
 225         /* Generic AT76C505/RFMD */
 226         { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
 227         /*
 228          * at76c505-rfmd2958
 229          */
 230         /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
 231         { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
 232         /* Fiberline FL-WL240U */
 233         { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
 234         /* CNet CNUSB-611G */
 235         { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
 236         /* Linksys WUSB11 v2.8 */
 237         { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
 238         /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
 239         { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
 240         /* Corega WLAN USB Stick 11 */
 241         { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
 242         /* Microstar MSI Box MS6978 */
 243         { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
 244         /*
 245          * at76c505a-rfmd2958
 246          */
 247         /* Generic AT76C505A device */
 248         { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
 249         /* Generic AT76C505AS device */
 250         { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
 251         /* Siemens Gigaset USB WLAN Adapter 11 */
 252         { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
 253         /* OQO Model 01+ Internal Wi-Fi */
 254         { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
 255         /*
 256          * at76c505amx-rfmd
 257          */
 258         /* Generic AT76C505AMX device */
 259         { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
 260         { }
 261 };
 262
 263 MODULE_DEVICE_TABLE(usb, dev_table);
 264
 265 /* Supported rates of this hardware, bit 7 marks basic rates */
 266 static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
 267
 268 static const char *const preambles[] = { "long", "short", "auto" };
 269
 270 /* Firmware download */
 271 /* DFU states */
 272 #define STATE_IDLE                      0x00
 273 #define STATE_DETACH                    0x01
 274 #define STATE_DFU_IDLE                  0x02
 275 #define STATE_DFU_DOWNLOAD_SYNC         0x03
 276 #define STATE_DFU_DOWNLOAD_BUSY         0x04
 277 #define STATE_DFU_DOWNLOAD_IDLE         0x05
 278 #define STATE_DFU_MANIFEST_SYNC         0x06
 279 #define STATE_DFU_MANIFEST              0x07
 280 #define STATE_DFU_MANIFEST_WAIT_RESET   0x08
 281 #define STATE_DFU_UPLOAD_IDLE           0x09
 282 #define STATE_DFU_ERROR                 0x0a
 283
 284 /* DFU commands */
 285 #define DFU_DETACH                      0
 286 #define DFU_DNLOAD                      1
 287 #define DFU_UPLOAD                      2
 288 #define DFU_GETSTATUS                   3
 289 #define DFU_CLRSTATUS                   4
 290 #define DFU_GETSTATE                    5
 291 #define DFU_ABORT                       6
 292
 293 #define FW_BLOCK_SIZE 1024
 294
 295 struct dfu_status {
 296         unsigned char status;
 297         unsigned char poll_timeout[3];
 298         unsigned char state;
 299         unsigned char string;
 300 } __attribute__((packed));
 301
 302 static inline int at76_is_intersil(enum board_type board)
 303 {
 304         return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
 305 }
 306
 307 static inline int at76_is_503rfmd(enum board_type board)
 308 {
 309         return (board == BOARD_503 || board == BOARD_503_ACC);
 310 }
 311
 312 static inline int at76_is_505a(enum board_type board)
 313 {
 314         return (board == BOARD_505A || board == BOARD_505AMX);
 315 }
 316
 317 /* Load a block of the first (internal) part of the firmware */
 318 static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
 319                                   void *block, int size)
 320 {
 321         return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
 322                                USB_TYPE_CLASS | USB_DIR_OUT |
 323                                USB_RECIP_INTERFACE, blockno, 0, block, size,
 324                                USB_CTRL_GET_TIMEOUT);
 325 }
 326
 327 static int at76_dfu_get_status(struct usb_device *udev,
 328                                struct dfu_status *status)
 329 {
 330         int ret;
 331
 332         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
 333                               USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
 334                               0, 0, status, sizeof(struct dfu_status),
 335                               USB_CTRL_GET_TIMEOUT);
 336         return ret;
 337 }
 338
 339 static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state)
 340 {
 341         int ret;
 342
 343         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
 344                               USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
 345                               0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
 346         return ret;
 347 }
 348
 349 /* Convert timeout from the DFU status to jiffies */
 350 static inline unsigned long at76_get_timeout(struct dfu_status *s)
 351 {
 352         return msecs_to_jiffies((s->poll_timeout[2] << 16)
 353                                 | (s->poll_timeout[1] << 8)
 354                                 | (s->poll_timeout[0]));
 355 }
 356
 357 /* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
 358  * its value in jiffies in the MANIFEST_SYNC state.  */
 359 static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
 360                                 int manifest_sync_timeout)
 361 {
 362         u8 *block;
 363         struct dfu_status dfu_stat_buf;
 364         int ret = 0;
 365         int need_dfu_state = 1;
 366         int is_done = 0;
 367         u8 dfu_state = 0;
 368         u32 dfu_timeout = 0;
 369         int bsize = 0;
 370         int blockno = 0;
 371
 372         at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
 373                  manifest_sync_timeout);
 374
 375         if (!size) {
 376                 dev_printk(KERN_ERR, &udev->dev, "FW buffer length invalid!\n");
 377                 return -EINVAL;
 378         }
 379
 380         block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
 381         if (!block)
 382                 return -ENOMEM;
 383
 384         do {
 385                 if (need_dfu_state) {
 386                         ret = at76_dfu_get_state(udev, &dfu_state);
 387                         if (ret < 0) {
 388                                 dev_printk(KERN_ERR, &udev->dev,
 389                                            "cannot get DFU state: %d\n", ret);
 390                                 goto exit;
 391                         }
 392                         need_dfu_state = 0;
 393                 }
 394
 395                 switch (dfu_state) {
 396                 case STATE_DFU_DOWNLOAD_SYNC:
 397                         at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
 398                         ret = at76_dfu_get_status(udev, &dfu_stat_buf);
 399                         if (ret >= 0) {
 400                                 dfu_state = dfu_stat_buf.state;
 401                                 dfu_timeout = at76_get_timeout(&dfu_stat_buf);
 402                                 need_dfu_state = 0;
 403                         } else
 404                                 dev_printk(KERN_ERR, &udev->dev,
 405                                            "at76_dfu_get_status returned %d\n",
 406                                            ret);
 407                         break;
 408
 409                 case STATE_DFU_DOWNLOAD_BUSY:
 410                         at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
 411                         need_dfu_state = 1;
 412
 413                         at76_dbg(DBG_DFU, "DFU: Resetting device");
 414                         schedule_timeout_interruptible(dfu_timeout);
 415                         break;
 416
 417                 case STATE_DFU_DOWNLOAD_IDLE:
 418                         at76_dbg(DBG_DFU, "DOWNLOAD...");
 419                         /* fall through */
 420                 case STATE_DFU_IDLE:
 421                         at76_dbg(DBG_DFU, "DFU IDLE");
 422
 423                         bsize = min_t(int, size, FW_BLOCK_SIZE);
 424                         memcpy(block, buf, bsize);
 425                         at76_dbg(DBG_DFU, "int fw, size left = %5d, "
 426                                  "bsize = %4d, blockno = %2d", size, bsize,
 427                                  blockno);
 428                         ret =
 429                             at76_load_int_fw_block(udev, blockno, block, bsize);
 430                         buf += bsize;
 431                         size -= bsize;
 432                         blockno++;
 433
 434                         if (ret != bsize)
 435                                 dev_printk(KERN_ERR, &udev->dev,
 436                                            "at76_load_int_fw_block "
 437                                            "returned %d\n", ret);
 438                         need_dfu_state = 1;
 439                         break;
 440
 441                 case STATE_DFU_MANIFEST_SYNC:
 442                         at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
 443
 444                         ret = at76_dfu_get_status(udev, &dfu_stat_buf);
 445                         if (ret < 0)
 446                                 break;
 447
 448                         dfu_state = dfu_stat_buf.state;
 449                         dfu_timeout = at76_get_timeout(&dfu_stat_buf);
 450                         need_dfu_state = 0;
 451
 452                         /* override the timeout from the status response,
 453                            needed for AT76C505A */
 454                         if (manifest_sync_timeout > 0)
 455                                 dfu_timeout = manifest_sync_timeout;
 456
 457                         at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
 458                         schedule_timeout_interruptible(dfu_timeout);
 459                         break;
 460
 461                 case STATE_DFU_MANIFEST:
 462                         at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
 463                         is_done = 1;
 464                         break;
 465
 466                 case STATE_DFU_MANIFEST_WAIT_RESET:
 467                         at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
 468                         is_done = 1;
 469                         break;
 470
 471                 case STATE_DFU_UPLOAD_IDLE:
 472                         at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
 473                         break;
 474
 475                 case STATE_DFU_ERROR:
 476                         at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
 477                         ret = -EPIPE;
 478                         break;
 479
 480                 default:
 481                         at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", dfu_state);
 482                         ret = -EINVAL;
 483                         break;
 484                 }
 485         } while (!is_done && (ret >= 0));
 486
 487 exit:
 488         kfree(block);
 489         if (ret >= 0)
 490                 ret = 0;
 491
 492         return ret;
 493 }
 494
 495 #define HEX2STR_BUFFERS 4
 496 #define HEX2STR_MAX_LEN 64
 497 #define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10)
 498
 499 /* Convert binary data into hex string */
 500 static char *hex2str(void *buf, int len)
 501 {
 502         static atomic_t a = ATOMIC_INIT(0);
 503         static char bufs[HEX2STR_BUFFERS][3 * HEX2STR_MAX_LEN + 1];
 504         char *ret = bufs[atomic_inc_return(&a) & (HEX2STR_BUFFERS - 1)];
 505         char *obuf = ret;
 506         u8 *ibuf = buf;
 507
 508         if (len > HEX2STR_MAX_LEN)
 509                 len = HEX2STR_MAX_LEN;
 510
 511         if (len <= 0) {
 512                 ret[0] = '\0';
 513                 return ret;
 514         }
 515
 516         while (len--) {
 517                 *obuf++ = BIN2HEX(*ibuf >> 4);
 518                 *obuf++ = BIN2HEX(*ibuf & 0xf);
 519                 *obuf++ = '-';
 520                 ibuf++;
 521         }
 522         *(--obuf) = '\0';
 523
 524         return ret;
 525 }
 526
 527 #define MAC2STR_BUFFERS 4
 528
 529 static inline char *mac2str(u8 *mac)
 530 {
 531         static atomic_t a = ATOMIC_INIT(0);
 532         static char bufs[MAC2STR_BUFFERS][6 * 3];
 533         char *str;
 534
 535         str = bufs[atomic_inc_return(&a) & (MAC2STR_BUFFERS - 1)];
 536         sprintf(str, "%02x:%02x:%02x:%02x:%02x:%02x",
 537                 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
 538         return str;
 539 }
 540
 541 /* LED trigger */
 542 static int tx_activity;
 543 static void at76_ledtrig_tx_timerfunc(unsigned long data);
 544 static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc, 0, 0);
 545 DEFINE_LED_TRIGGER(ledtrig_tx);
 546
 547 static void at76_ledtrig_tx_timerfunc(unsigned long data)
 548 {
 549         static int tx_lastactivity;
 550
 551         if (tx_lastactivity != tx_activity) {
 552                 tx_lastactivity = tx_activity;
 553                 led_trigger_event(ledtrig_tx, LED_FULL);
 554                 mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
 555         } else
 556                 led_trigger_event(ledtrig_tx, LED_OFF);
 557 }
 558
 559 static void at76_ledtrig_tx_activity(void)
 560 {
 561         tx_activity++;
 562         if (!timer_pending(&ledtrig_tx_timer))
 563                 mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
 564 }
 565
 566 static int at76_remap(struct usb_device *udev)
 567 {
 568         int ret;
 569         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
 570                               USB_TYPE_VENDOR | USB_DIR_OUT |
 571                               USB_RECIP_INTERFACE, 0, 0, NULL, 0,
 572                               USB_CTRL_GET_TIMEOUT);
 573         if (ret < 0)
 574                 return ret;
 575         return 0;
 576 }
 577
 578 static int at76_get_op_mode(struct usb_device *udev)
 579 {
 580         int ret;
 581         u8 saved;
 582         u8 *op_mode;
 583
 584         op_mode = kmalloc(1, GFP_NOIO);
 585         if (!op_mode)
 586                 return -ENOMEM;
 587         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 588                               USB_TYPE_VENDOR | USB_DIR_IN |
 589                               USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
 590                               USB_CTRL_GET_TIMEOUT);
 591         saved = *op_mode;
 592         kfree(op_mode);
 593
 594         if (ret < 0)
 595                 return ret;
 596         else if (ret < 1)
 597                 return -EIO;
 598         else
 599                 return saved;
 600 }
 601
 602 /* Load a block of the second ("external") part of the firmware */
 603 static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
 604                                          void *block, int size)
 605 {
 606         return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
 607                                USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
 608                                0x0802, blockno, block, size,
 609                                USB_CTRL_GET_TIMEOUT);
 610 }
 611
 612 static inline int at76_get_hw_cfg(struct usb_device *udev,
 613                                   union at76_hwcfg *buf, int buf_size)
 614 {
 615         return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 616                                USB_TYPE_VENDOR | USB_DIR_IN |
 617                                USB_RECIP_INTERFACE, 0x0a02, 0,
 618                                buf, buf_size, USB_CTRL_GET_TIMEOUT);
 619 }
 620
 621 /* Intersil boards use a different "value" for GetHWConfig requests */
 622 static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
 623                                            union at76_hwcfg *buf, int buf_size)
 624 {
 625         return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 626                                USB_TYPE_VENDOR | USB_DIR_IN |
 627                                USB_RECIP_INTERFACE, 0x0902, 0,
 628                                buf, buf_size, USB_CTRL_GET_TIMEOUT);
 629 }
 630
 631 /* Get the hardware configuration for the adapter and put it to the appropriate
 632  * fields of 'priv' (the GetHWConfig request and interpretation of the result
 633  * depends on the board type) */
 634 static int at76_get_hw_config(struct at76_priv *priv)
 635 {
 636         int ret;
 637         union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
 638
 639         if (!hwcfg)
 640                 return -ENOMEM;
 641
 642         if (at76_is_intersil(priv->board_type)) {
 643                 ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
 644                                                sizeof(hwcfg->i));
 645                 if (ret < 0)
 646                         goto exit;
 647                 memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
 648                 priv->regulatory_domain = hwcfg->i.regulatory_domain;
 649         } else if (at76_is_503rfmd(priv->board_type)) {
 650                 ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
 651                 if (ret < 0)
 652                         goto exit;
 653                 memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
 654                 priv->regulatory_domain = hwcfg->r3.regulatory_domain;
 655         } else {
 656                 ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
 657                 if (ret < 0)
 658                         goto exit;
 659                 memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
 660                 priv->regulatory_domain = hwcfg->r5.regulatory_domain;
 661         }
 662
 663 exit:
 664         kfree(hwcfg);
 665         if (ret < 0)
 666                 printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
 667                        wiphy_name(priv->hw->wiphy), ret);
 668
 669         return ret;
 670 }
 671
 672 static struct reg_domain const *at76_get_reg_domain(u16 code)
 673 {
 674         int i;
 675         static struct reg_domain const fd_tab[] = {
 676                 { 0x10, "FCC (USA)", 0x7ff },   /* ch 1-11 */
 677                 { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */
 678                 { 0x30, "ETSI (most of Europe)", 0x1fff },      /* ch 1-13 */
 679                 { 0x31, "Spain", 0x600 },       /* ch 10-11 */
 680                 { 0x32, "France", 0x1e00 },     /* ch 10-13 */
 681                 { 0x40, "MKK (Japan)", 0x2000 },        /* ch 14 */
 682                 { 0x41, "MKK1 (Japan)", 0x3fff },       /* ch 1-14 */
 683                 { 0x50, "Israel", 0x3fc },      /* ch 3-9 */
 684                 { 0x00, "<unknown>", 0xffffffff }       /* ch 1-32 */
 685         };
 686
 687         /* Last entry is fallback for unknown domain code */
 688         for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
 689                 if (code == fd_tab[i].code)
 690                         break;
 691
 692         return &fd_tab[i];
 693 }
 694
 695 static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
 696                                int buf_size)
 697 {
 698         int ret;
 699
 700         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
 701                               USB_TYPE_VENDOR | USB_DIR_IN |
 702                               USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
 703                               USB_CTRL_GET_TIMEOUT);
 704         if (ret >= 0 && ret != buf_size)
 705                 return -EIO;
 706         return ret;
 707 }
 708
 709 /* Return positive number for status, negative for an error */
 710 static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
 711 {
 712         u8 *stat_buf;
 713         int ret;
 714
 715         stat_buf = kmalloc(40, GFP_NOIO);
 716         if (!stat_buf)
 717                 return -ENOMEM;
 718
 719         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
 720                         USB_TYPE_VENDOR | USB_DIR_IN |
 721                         USB_RECIP_INTERFACE, cmd, 0, stat_buf,
 722                         40, USB_CTRL_GET_TIMEOUT);
 723         if (ret >= 0)
 724                 ret = stat_buf[5];
 725         kfree(stat_buf);
 726
 727         return ret;
 728 }
 729
 730 #define MAKE_CMD_CASE(c) case (c): return #c
 731 static const char *at76_get_cmd_string(u8 cmd_status)
 732 {
 733         switch (cmd_status) {
 734                 MAKE_CMD_CASE(CMD_SET_MIB);
 735                 MAKE_CMD_CASE(CMD_GET_MIB);
 736                 MAKE_CMD_CASE(CMD_SCAN);
 737                 MAKE_CMD_CASE(CMD_JOIN);
 738                 MAKE_CMD_CASE(CMD_START_IBSS);
 739                 MAKE_CMD_CASE(CMD_RADIO_ON);
 740                 MAKE_CMD_CASE(CMD_RADIO_OFF);
 741                 MAKE_CMD_CASE(CMD_STARTUP);
 742         }
 743
 744         return "UNKNOWN";
 745 }
 746
 747 static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
 748                                  int buf_size)
 749 {
 750         int ret;
 751         struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
 752                                                buf_size, GFP_KERNEL);
 753
 754         if (!cmd_buf)
 755                 return -ENOMEM;
 756
 757         cmd_buf->cmd = cmd;
 758         cmd_buf->reserved = 0;
 759         cmd_buf->size = cpu_to_le16(buf_size);
 760         memcpy(cmd_buf->data, buf, buf_size);
 761
 762         at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size,
 763                       "issuing command %s (0x%02x)",
 764                       at76_get_cmd_string(cmd), cmd);
 765
 766         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
 767                               USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
 768                               0, 0, cmd_buf,
 769                               sizeof(struct at76_command) + buf_size,
 770                               USB_CTRL_GET_TIMEOUT);
 771         kfree(cmd_buf);
 772         return ret;
 773 }
 774
 775 #define MAKE_CMD_STATUS_CASE(c) case (c): return #c
 776 static const char *at76_get_cmd_status_string(u8 cmd_status)
 777 {
 778         switch (cmd_status) {
 779                 MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
 780                 MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
 781                 MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
 782                 MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
 783                 MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
 784                 MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
 785                 MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
 786                 MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
 787                 MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
 788         }
 789
 790         return "UNKNOWN";
 791 }
 792
 793 /* Wait until the command is completed */
 794 static int at76_wait_completion(struct at76_priv *priv, int cmd)
 795 {
 796         int status = 0;
 797         unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
 798
 799         do {
 800                 status = at76_get_cmd_status(priv->udev, cmd);
 801                 if (status < 0) {
 802                         printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
 803                                wiphy_name(priv->hw->wiphy), status);
 804                         break;
 805                 }
 806
 807                 at76_dbg(DBG_WAIT_COMPLETE,
 808                          "%s: Waiting on cmd %d, status = %d (%s)",
 809                          wiphy_name(priv->hw->wiphy), cmd, status,
 810                          at76_get_cmd_status_string(status));
 811
 812                 if (status != CMD_STATUS_IN_PROGRESS
 813                     && status != CMD_STATUS_IDLE)
 814                         break;
 815
 816                 schedule_timeout_interruptible(HZ / 10);        /* 100 ms */
 817                 if (time_after(jiffies, timeout)) {
 818                         printk(KERN_ERR
 819                                "%s: completion timeout for command %d\n",
 820                                wiphy_name(priv->hw->wiphy), cmd);
 821                         status = -ETIMEDOUT;
 822                         break;
 823                 }
 824         } while (1);
 825
 826         return status;
 827 }
 828
 829 static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
 830 {
 831         int ret;
 832
 833         ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
 834                                     offsetof(struct set_mib_buffer,
 835                                              data) + buf->size);
 836         if (ret < 0)
 837                 return ret;
 838
 839         ret = at76_wait_completion(priv, CMD_SET_MIB);
 840         if (ret != CMD_STATUS_COMPLETE) {
 841                 printk(KERN_INFO
 842                        "%s: set_mib: at76_wait_completion failed "
 843                        "with %d\n", wiphy_name(priv->hw->wiphy), ret);
 844                 ret = -EIO;
 845         }
 846
 847         return ret;
 848 }
 849
 850 /* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
 851 static int at76_set_radio(struct at76_priv *priv, int enable)
 852 {
 853         int ret;
 854         int cmd;
 855
 856         if (priv->radio_on == enable)
 857                 return 0;
 858
 859         cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
 860
 861         ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
 862         if (ret < 0)
 863                 printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
 864                        wiphy_name(priv->hw->wiphy), cmd, ret);
 865         else
 866                 ret = 1;
 867
 868         priv->radio_on = enable;
 869         return ret;
 870 }
 871
 872 /* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
 873 static int at76_set_pm_mode(struct at76_priv *priv)
 874 {
 875         int ret = 0;
 876
 877         priv->mib_buf.type = MIB_MAC_MGMT;
 878         priv->mib_buf.size = 1;
 879         priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
 880         priv->mib_buf.data.byte = priv->pm_mode;
 881
 882         ret = at76_set_mib(priv, &priv->mib_buf);
 883         if (ret < 0)
 884                 printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
 885                        wiphy_name(priv->hw->wiphy), ret);
 886
 887         return ret;
 888 }
 889
 890 static int at76_set_preamble(struct at76_priv *priv, u8 type)
 891 {
 892         int ret = 0;
 893
 894         priv->mib_buf.type = MIB_LOCAL;
 895         priv->mib_buf.size = 1;
 896         priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
 897         priv->mib_buf.data.byte = type;
 898
 899         ret = at76_set_mib(priv, &priv->mib_buf);
 900         if (ret < 0)
 901                 printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
 902                        wiphy_name(priv->hw->wiphy), ret);
 903
 904         return ret;
 905 }
 906
 907 static int at76_set_frag(struct at76_priv *priv, u16 size)
 908 {
 909         int ret = 0;
 910
 911         priv->mib_buf.type = MIB_MAC;
 912         priv->mib_buf.size = 2;
 913         priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
 914         priv->mib_buf.data.word = cpu_to_le16(size);
 915
 916         ret = at76_set_mib(priv, &priv->mib_buf);
 917         if (ret < 0)
 918                 printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
 919                        wiphy_name(priv->hw->wiphy), ret);
 920
 921         return ret;
 922 }
 923
 924 static int at76_set_rts(struct at76_priv *priv, u16 size)
 925 {
 926         int ret = 0;
 927
 928         priv->mib_buf.type = MIB_MAC;
 929         priv->mib_buf.size = 2;
 930         priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
 931         priv->mib_buf.data.word = cpu_to_le16(size);
 932
 933         ret = at76_set_mib(priv, &priv->mib_buf);
 934         if (ret < 0)
 935                 printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
 936                        wiphy_name(priv->hw->wiphy), ret);
 937
 938         return ret;
 939 }
 940
 941 static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
 942 {
 943         int ret = 0;
 944
 945         priv->mib_buf.type = MIB_LOCAL;
 946         priv->mib_buf.size = 1;
 947         priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
 948         priv->mib_buf.data.byte = onoff;
 949
 950         ret = at76_set_mib(priv, &priv->mib_buf);
 951         if (ret < 0)
 952                 printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
 953                        wiphy_name(priv->hw->wiphy), ret);
 954
 955         return ret;
 956 }
 957
 958 static void at76_dump_mib_mac_addr(struct at76_priv *priv)
 959 {
 960         int i;
 961         int ret;
 962         struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
 963                                          GFP_KERNEL);
 964
 965         if (!m)
 966                 return;
 967
 968         ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
 969                            sizeof(struct mib_mac_addr));
 970         if (ret < 0) {
 971                 printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
 972                        wiphy_name(priv->hw->wiphy), ret);
 973                 goto exit;
 974         }
 975
 976         at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x",
 977                  wiphy_name(priv->hw->wiphy),
 978                  mac2str(m->mac_addr), m->res[0], m->res[1]);
 979         for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
 980                 at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, "
 981                          "status %d", wiphy_name(priv->hw->wiphy), i,
 982                          mac2str(m->group_addr[i]), m->group_addr_status[i]);
 983 exit:
 984         kfree(m);
 985 }
 986
 987 static void at76_dump_mib_mac_wep(struct at76_priv *priv)
 988 {
 989         int i;
 990         int ret;
 991         int key_len;
 992         struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
 993
 994         if (!m)
 995                 return;
 996
 997         ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
 998                            sizeof(struct mib_mac_wep));
 999         if (ret < 0) {
1000                 printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
1001                        wiphy_name(priv->hw->wiphy), ret);
1002                 goto exit;
1003         }
1004
1005         at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
1006                  "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
1007                  "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
1008                  m->privacy_invoked, m->wep_default_key_id,
1009                  m->wep_key_mapping_len, m->exclude_unencrypted,
1010                  le32_to_cpu(m->wep_icv_error_count),
1011                  le32_to_cpu(m->wep_excluded_count), m->encryption_level,
1012                  m->wep_default_key_id);
1013
1014         key_len = (m->encryption_level == 1) ?
1015             WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
1016
1017         for (i = 0; i < WEP_KEYS; i++)
1018                 at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s",
1019                          wiphy_name(priv->hw->wiphy), i,
1020                          hex2str(m->wep_default_keyvalue[i], key_len));
1021 exit:
1022         kfree(m);
1023 }
1024
1025 static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
1026 {
1027         int ret;
1028         struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
1029                                          GFP_KERNEL);
1030
1031         if (!m)
1032                 return;
1033
1034         ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
1035                            sizeof(struct mib_mac_mgmt));
1036         if (ret < 0) {
1037                 printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
1038                        wiphy_name(priv->hw->wiphy), ret);
1039                 goto exit;
1040         }
1041
1042         at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
1043                  "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
1044                  "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
1045                  "current_bssid %s current_essid %s current_bss_type %d "
1046                  "pm_mode %d ibss_change %d res %d "
1047                  "multi_domain_capability_implemented %d "
1048                  "international_roaming %d country_string %.3s",
1049                  wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
1050                  le16_to_cpu(m->CFP_max_duration),
1051                  le16_to_cpu(m->medium_occupancy_limit),
1052                  le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
1053                  m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
1054                  m->CFP_period, mac2str(m->current_bssid),
1055                  hex2str(m->current_essid, IW_ESSID_MAX_SIZE),
1056                  m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
1057                  m->res, m->multi_domain_capability_implemented,
1058                  m->multi_domain_capability_enabled, m->country_string);
1059 exit:
1060         kfree(m);
1061 }
1062
1063 static void at76_dump_mib_mac(struct at76_priv *priv)
1064 {
1065         int ret;
1066         struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
1067
1068         if (!m)
1069                 return;
1070
1071         ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
1072         if (ret < 0) {
1073                 printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
1074                        wiphy_name(priv->hw->wiphy), ret);
1075                 goto exit;
1076         }
1077
1078         at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
1079                  "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
1080                  "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
1081                  "scan_type %d scan_channel %d probe_delay %u "
1082                  "min_channel_time %d max_channel_time %d listen_int %d "
1083                  "desired_ssid %s desired_bssid %s desired_bsstype %d",
1084                  wiphy_name(priv->hw->wiphy),
1085                  le32_to_cpu(m->max_tx_msdu_lifetime),
1086                  le32_to_cpu(m->max_rx_lifetime),
1087                  le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
1088                  le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
1089                  m->short_retry_time, m->long_retry_time, m->scan_type,
1090                  m->scan_channel, le16_to_cpu(m->probe_delay),
1091                  le16_to_cpu(m->min_channel_time),
1092                  le16_to_cpu(m->max_channel_time),
1093                  le16_to_cpu(m->listen_interval),
1094                  hex2str(m->desired_ssid, IW_ESSID_MAX_SIZE),
1095                  mac2str(m->desired_bssid), m->desired_bsstype);
1096 exit:
1097         kfree(m);
1098 }
1099
1100 static void at76_dump_mib_phy(struct at76_priv *priv)
1101 {
1102         int ret;
1103         struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
1104
1105         if (!m)
1106                 return;
1107
1108         ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
1109         if (ret < 0) {
1110                 printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
1111                        wiphy_name(priv->hw->wiphy), ret);
1112                 goto exit;
1113         }
1114
1115         at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
1116                  "sifs_time %d preamble_length %d plcp_header_length %d "
1117                  "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
1118                  "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
1119                  "phy_type %d current_reg_domain %d",
1120                  wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
1121                  le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
1122                  le16_to_cpu(m->preamble_length),
1123                  le16_to_cpu(m->plcp_header_length),
1124                  le16_to_cpu(m->mpdu_max_length),
1125                  le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
1126                  m->operation_rate_set[1], m->operation_rate_set[2],
1127                  m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
1128                  m->phy_type, m->current_reg_domain);
1129 exit:
1130         kfree(m);
1131 }
1132
1133 static void at76_dump_mib_local(struct at76_priv *priv)
1134 {
1135         int ret;
1136         struct mib_local *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
1137
1138         if (!m)
1139                 return;
1140
1141         ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
1142         if (ret < 0) {
1143                 printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
1144                        wiphy_name(priv->hw->wiphy), ret);
1145                 goto exit;
1146         }
1147
1148         at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
1149                  "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
1150                  "preamble_type %d", wiphy_name(priv->hw->wiphy),
1151                  m->beacon_enable,
1152                  m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
1153                  m->preamble_type);
1154 exit:
1155         kfree(m);
1156 }
1157
1158 static void at76_dump_mib_mdomain(struct at76_priv *priv)
1159 {
1160         int ret;
1161         struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
1162
1163         if (!m)
1164                 return;
1165
1166         ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
1167                            sizeof(struct mib_mdomain));
1168         if (ret < 0) {
1169                 printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
1170                        wiphy_name(priv->hw->wiphy), ret);
1171                 goto exit;
1172         }
1173
1174         at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s",
1175                  wiphy_name(priv->hw->wiphy),
1176                  hex2str(m->channel_list, sizeof(m->channel_list)));
1177
1178         at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s",
1179                  wiphy_name(priv->hw->wiphy),
1180                  hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel)));
1181 exit:
1182         kfree(m);
1183 }
1184
1185 /* Enable monitor mode */
1186 static int at76_start_monitor(struct at76_priv *priv)
1187 {
1188         struct at76_req_scan scan;
1189         int ret;
1190
1191         memset(&scan, 0, sizeof(struct at76_req_scan));
1192         memset(scan.bssid, 0xff, ETH_ALEN);
1193
1194         scan.channel = priv->channel;
1195         scan.scan_type = SCAN_TYPE_PASSIVE;
1196         scan.international_scan = 0;
1197
1198         ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
1199         if (ret >= 0)
1200                 ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
1201
1202         return ret;
1203 }
1204
1205 /* Calculate padding from txbuf->wlength (which excludes the USB TX header),
1206    likely to compensate a flaw in the AT76C503A USB part ... */
1207 static inline int at76_calc_padding(int wlen)
1208 {
1209         /* add the USB TX header */
1210         wlen += AT76_TX_HDRLEN;
1211
1212         wlen = wlen % 64;
1213
1214         if (wlen < 50)
1215                 return 50 - wlen;
1216
1217         if (wlen >= 61)
1218                 return 64 + 50 - wlen;
1219
1220         return 0;
1221 }
1222
1223 static void at76_rx_callback(struct urb *urb)
1224 {
1225         struct at76_priv *priv = urb->context;
1226
1227         priv->rx_tasklet.data = (unsigned long)urb;
1228         tasklet_schedule(&priv->rx_tasklet);
1229         return;
1230 }
1231
1232 static int at76_submit_rx_urb(struct at76_priv *priv)
1233 {
1234         int ret;
1235         int size;
1236         struct sk_buff *skb = priv->rx_skb;
1237
1238         if (!priv->rx_urb) {
1239                 printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
1240                        wiphy_name(priv->hw->wiphy), __func__);
1241                 return -EFAULT;
1242         }
1243
1244         if (!skb) {
1245                 skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
1246                 if (!skb) {
1247                         printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
1248                                wiphy_name(priv->hw->wiphy));
1249                         ret = -ENOMEM;
1250                         goto exit;
1251                 }
1252                 priv->rx_skb = skb;
1253         } else {
1254                 skb_push(skb, skb_headroom(skb));
1255                 skb_trim(skb, 0);
1256         }
1257
1258         size = skb_tailroom(skb);
1259         usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
1260                           skb_put(skb, size), size, at76_rx_callback, priv);
1261         ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
1262         if (ret < 0) {
1263                 if (ret == -ENODEV)
1264                         at76_dbg(DBG_DEVSTART,
1265                                  "usb_submit_urb returned -ENODEV");
1266                 else
1267                         printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
1268                                wiphy_name(priv->hw->wiphy), ret);
1269         }
1270
1271 exit:
1272         if (ret < 0 && ret != -ENODEV)
1273                 printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
1274                        "driver and/or power cycle the device\n",
1275                        wiphy_name(priv->hw->wiphy));
1276
1277         return ret;
1278 }
1279
1280 /* Download external firmware */
1281 static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
1282 {
1283         int ret;
1284         int op_mode;
1285         int blockno = 0;
1286         int bsize;
1287         u8 *block;
1288         u8 *buf = fwe->extfw;
1289         int size = fwe->extfw_size;
1290
1291         if (!buf || !size)
1292                 return -ENOENT;
1293
1294         op_mode = at76_get_op_mode(udev);
1295         at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
1296
1297         if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
1298                 dev_printk(KERN_ERR, &udev->dev, "unexpected opmode %d\n",
1299                            op_mode);
1300                 return -EINVAL;
1301         }
1302
1303         block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
1304         if (!block)
1305                 return -ENOMEM;
1306
1307         at76_dbg(DBG_DEVSTART, "downloading external firmware");
1308
1309         /* for fw >= 0.100, the device needs an extra empty block */
1310         do {
1311                 bsize = min_t(int, size, FW_BLOCK_SIZE);
1312                 memcpy(block, buf, bsize);
1313                 at76_dbg(DBG_DEVSTART,
1314                          "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
1315                          size, bsize, blockno);
1316                 ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
1317                 if (ret != bsize) {
1318                         dev_printk(KERN_ERR, &udev->dev,
1319                                    "loading %dth firmware block failed: %d\n",
1320                                    blockno, ret);
1321                         goto exit;
1322                 }
1323                 buf += bsize;
1324                 size -= bsize;
1325                 blockno++;
1326         } while (bsize > 0);
1327
1328         if (at76_is_505a(fwe->board_type)) {
1329                 at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
1330                 schedule_timeout_interruptible(HZ / 5 + 1);
1331         }
1332
1333 exit:
1334         kfree(block);
1335         if (ret < 0)
1336                 dev_printk(KERN_ERR, &udev->dev,
1337                            "downloading external firmware failed: %d\n", ret);
1338         return ret;
1339 }
1340
1341 /* Download internal firmware */
1342 static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
1343 {
1344         int ret;
1345         int need_remap = !at76_is_505a(fwe->board_type);
1346
1347         ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
1348                                    need_remap ? 0 : 2 * HZ);
1349
1350         if (ret < 0) {
1351                 dev_printk(KERN_ERR, &udev->dev,
1352                            "downloading internal fw failed with %d\n", ret);
1353                 goto exit;
1354         }
1355
1356         at76_dbg(DBG_DEVSTART, "sending REMAP");
1357
1358         /* no REMAP for 505A (see SF driver) */
1359         if (need_remap) {
1360                 ret = at76_remap(udev);
1361                 if (ret < 0) {
1362                         dev_printk(KERN_ERR, &udev->dev,
1363                                    "sending REMAP failed with %d\n", ret);
1364                         goto exit;
1365                 }
1366         }
1367
1368         at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
1369         schedule_timeout_interruptible(2 * HZ + 1);
1370         usb_reset_device(udev);
1371
1372 exit:
1373         return ret;
1374 }
1375
1376 static int at76_startup_device(struct at76_priv *priv)
1377 {
1378         struct at76_card_config *ccfg = &priv->card_config;
1379         int ret;
1380
1381         at76_dbg(DBG_PARAMS,
1382                  "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d "
1383                  "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
1384                  priv->essid, hex2str(priv->essid, IW_ESSID_MAX_SIZE),
1385                  priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
1386                  priv->channel, priv->wep_enabled ? "enabled" : "disabled",
1387                  priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
1388         at76_dbg(DBG_PARAMS,
1389                  "%s param: preamble %s rts %d retry %d frag %d "
1390                  "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
1391                  preambles[priv->preamble_type], priv->rts_threshold,
1392                  priv->short_retry_limit, priv->frag_threshold,
1393                  priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
1394                  TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
1395                  TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
1396                  TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
1397                  TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
1398         at76_dbg(DBG_PARAMS,
1399                  "%s param: pm_mode %d pm_period %d auth_mode %s "
1400                  "scan_times %d %d scan_mode %s",
1401                  wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
1402                  priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
1403                  priv->scan_min_time, priv->scan_max_time,
1404                  priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
1405
1406         memset(ccfg, 0, sizeof(struct at76_card_config));
1407         ccfg->promiscuous_mode = 0;
1408         ccfg->short_retry_limit = priv->short_retry_limit;
1409
1410         if (priv->wep_enabled) {
1411                 if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
1412                         ccfg->encryption_type = 2;
1413                 else
1414                         ccfg->encryption_type = 1;
1415
1416                 /* jal: always exclude unencrypted if WEP is active */
1417                 ccfg->exclude_unencrypted = 1;
1418         } else {
1419                 ccfg->exclude_unencrypted = 0;
1420                 ccfg->encryption_type = 0;
1421         }
1422
1423         ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
1424         ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
1425
1426         memcpy(ccfg->basic_rate_set, hw_rates, 4);
1427         /* jal: really needed, we do a set_mib for autorate later ??? */
1428         ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
1429         ccfg->channel = priv->channel;
1430         ccfg->privacy_invoked = priv->wep_enabled;
1431         memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
1432         ccfg->ssid_len = priv->essid_size;
1433
1434         ccfg->wep_default_key_id = priv->wep_key_id;
1435         memcpy(ccfg->wep_default_key_value, priv->wep_keys,
1436                sizeof(priv->wep_keys));
1437
1438         ccfg->short_preamble = priv->preamble_type;
1439         ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
1440
1441         ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
1442                                     sizeof(struct at76_card_config));
1443         if (ret < 0) {
1444                 printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
1445                        wiphy_name(priv->hw->wiphy), ret);
1446                 return ret;
1447         }
1448
1449         at76_wait_completion(priv, CMD_STARTUP);
1450
1451         /* remove BSSID from previous run */
1452         memset(priv->bssid, 0, ETH_ALEN);
1453
1454         if (at76_set_radio(priv, 1) == 1)
1455                 at76_wait_completion(priv, CMD_RADIO_ON);
1456
1457         ret = at76_set_preamble(priv, priv->preamble_type);
1458         if (ret < 0)
1459                 return ret;
1460
1461         ret = at76_set_frag(priv, priv->frag_threshold);
1462         if (ret < 0)
1463                 return ret;
1464
1465         ret = at76_set_rts(priv, priv->rts_threshold);
1466         if (ret < 0)
1467                 return ret;
1468
1469         ret = at76_set_autorate_fallback(priv,
1470                                          priv->txrate == TX_RATE_AUTO ? 1 : 0);
1471         if (ret < 0)
1472                 return ret;
1473
1474         ret = at76_set_pm_mode(priv);
1475         if (ret < 0)
1476                 return ret;
1477
1478         if (at76_debug & DBG_MIB) {
1479                 at76_dump_mib_mac(priv);
1480                 at76_dump_mib_mac_addr(priv);
1481                 at76_dump_mib_mac_mgmt(priv);
1482                 at76_dump_mib_mac_wep(priv);
1483                 at76_dump_mib_mdomain(priv);
1484                 at76_dump_mib_phy(priv);
1485                 at76_dump_mib_local(priv);
1486         }
1487
1488         return 0;
1489 }
1490
1491 /* Enable or disable promiscuous mode */
1492 static void at76_work_set_promisc(struct work_struct *work)
1493 {
1494         struct at76_priv *priv = container_of(work, struct at76_priv,
1495                                               work_set_promisc);
1496         int ret = 0;
1497
1498         if (priv->device_unplugged)
1499                 return;
1500
1501         mutex_lock(&priv->mtx);
1502
1503         priv->mib_buf.type = MIB_LOCAL;
1504         priv->mib_buf.size = 1;
1505         priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
1506         priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
1507
1508         ret = at76_set_mib(priv, &priv->mib_buf);
1509         if (ret < 0)
1510                 printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
1511                        wiphy_name(priv->hw->wiphy), ret);
1512
1513         mutex_unlock(&priv->mtx);
1514 }
1515
1516 /* Submit Rx urb back to the device */
1517 static void at76_work_submit_rx(struct work_struct *work)
1518 {
1519         struct at76_priv *priv = container_of(work, struct at76_priv,
1520                                               work_submit_rx);
1521
1522         mutex_lock(&priv->mtx);
1523         at76_submit_rx_urb(priv);
1524         mutex_unlock(&priv->mtx);
1525 }
1526
1527 static void at76_rx_tasklet(unsigned long param)
1528 {
1529         struct urb *urb = (struct urb *)param;
1530         struct at76_priv *priv = urb->context;
1531         struct at76_rx_buffer *buf;
1532         struct ieee80211_rx_status rx_status = { 0 };
1533
1534         if (priv->device_unplugged) {
1535                 at76_dbg(DBG_DEVSTART, "device unplugged");
1536                 if (urb)
1537                         at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
1538                 return;
1539         }
1540
1541         if (!priv->rx_skb || !priv->rx_skb->data)
1542                 return;
1543
1544         buf = (struct at76_rx_buffer *)priv->rx_skb->data;
1545
1546         if (urb->status != 0) {
1547                 if (urb->status != -ENOENT && urb->status != -ECONNRESET)
1548                         at76_dbg(DBG_URB,
1549                                  "%s %s: - nonzero Rx bulk status received: %d",
1550                                  __func__, wiphy_name(priv->hw->wiphy),
1551                                  urb->status);
1552                 return;
1553         }
1554
1555         at76_dbg(DBG_RX_ATMEL_HDR,
1556                  "%s: rx frame: rate %d rssi %d noise %d link %d",
1557                  wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
1558                  buf->noise_level, buf->link_quality);
1559
1560         skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
1561         skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength));
1562         at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
1563                       priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);
1564
1565         rx_status.signal = buf->rssi;
1566         rx_status.flag |= RX_FLAG_DECRYPTED;
1567         rx_status.flag |= RX_FLAG_IV_STRIPPED;
1568
1569         at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
1570                  priv->rx_skb->len, priv->rx_skb->data_len);
1571         memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
1572         ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);
1573
1574         /* Use a new skb for the next receive */
1575         priv->rx_skb = NULL;
1576
1577         at76_submit_rx_urb(priv);
1578 }
1579
1580 /* Load firmware into kernel memory and parse it */
1581 static struct fwentry *at76_load_firmware(struct usb_device *udev,
1582                                           enum board_type board_type)
1583 {
1584         int ret;
1585         char *str;
1586         struct at76_fw_header *fwh;
1587         struct fwentry *fwe = &firmwares[board_type];
1588
1589         mutex_lock(&fw_mutex);
1590
1591         if (fwe->loaded) {
1592                 at76_dbg(DBG_FW, "re-using previously loaded fw");
1593                 goto exit;
1594         }
1595
1596         at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
1597         ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
1598         if (ret < 0) {
1599                 dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
1600                            fwe->fwname);
1601                 dev_printk(KERN_ERR, &udev->dev,
1602                            "you may need to download the firmware from "
1603                            "http://developer.berlios.de/projects/at76c503a/\n");
1604                 goto exit;
1605         }
1606
1607         at76_dbg(DBG_FW, "got it.");
1608         fwh = (struct at76_fw_header *)(fwe->fw->data);
1609
1610         if (fwe->fw->size <= sizeof(*fwh)) {
1611                 dev_printk(KERN_ERR, &udev->dev,
1612                            "firmware is too short (0x%zx)\n", fwe->fw->size);
1613                 goto exit;
1614         }
1615
1616         /* CRC currently not checked */
1617         fwe->board_type = le32_to_cpu(fwh->board_type);
1618         if (fwe->board_type != board_type) {
1619                 dev_printk(KERN_ERR, &udev->dev,
1620                            "board type mismatch, requested %u, got %u\n",
1621                            board_type, fwe->board_type);
1622                 goto exit;
1623         }
1624
1625         fwe->fw_version.major = fwh->major;
1626         fwe->fw_version.minor = fwh->minor;
1627         fwe->fw_version.patch = fwh->patch;
1628         fwe->fw_version.build = fwh->build;
1629
1630         str = (char *)fwh + le32_to_cpu(fwh->str_offset);
1631         fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
1632         fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
1633         fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
1634         fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
1635
1636         fwe->loaded = 1;
1637
1638         dev_printk(KERN_DEBUG, &udev->dev,
1639                    "using firmware %s (version %d.%d.%d-%d)\n",
1640                    fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
1641
1642         at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
1643                  le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
1644                  le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
1645         at76_dbg(DBG_DEVSTART, "firmware id %s", str);
1646
1647 exit:
1648         mutex_unlock(&fw_mutex);
1649
1650         if (fwe->loaded)
1651                 return fwe;
1652         else
1653                 return NULL;
1654 }
1655
1656 static void at76_mac80211_tx_callback(struct urb *urb)
1657 {
1658         struct at76_priv *priv = urb->context;
1659         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
1660
1661         at76_dbg(DBG_MAC80211, "%s()", __func__);
1662
1663         switch (urb->status) {
1664         case 0:
1665                 /* success */
1666                 info->flags |= IEEE80211_TX_STAT_ACK;
1667                 break;
1668         case -ENOENT:
1669         case -ECONNRESET:
1670                 /* fail, urb has been unlinked */
1671                 /* FIXME: add error message */
1672                 break;
1673         default:
1674                 at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
1675                          __func__, urb->status);
1676                 break;
1677         }
1678
1679         memset(&info->status, 0, sizeof(info->status));
1680
1681         ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
1682
1683         priv->tx_skb = NULL;
1684
1685         ieee80211_wake_queues(priv->hw);
1686 }
1687
1688 static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
1689 {
1690         struct at76_priv *priv = hw->priv;
1691         struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
1692         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1693         int padding, submit_len, ret;
1694
1695         at76_dbg(DBG_MAC80211, "%s()", __func__);
1696
1697         if (priv->tx_urb->status == -EINPROGRESS) {
1698                 printk(KERN_ERR "%s: %s called while tx urb is pending\n",
1699                        wiphy_name(priv->hw->wiphy), __func__);
1700                 return NETDEV_TX_BUSY;
1701         }
1702
1703         ieee80211_stop_queues(hw);
1704
1705         at76_ledtrig_tx_activity();     /* tell ledtrigger we send a packet */
1706
1707         WARN_ON(priv->tx_skb != NULL);
1708
1709         priv->tx_skb = skb;
1710         padding = at76_calc_padding(skb->len);
1711         submit_len = AT76_TX_HDRLEN + skb->len + padding;
1712
1713         /* setup 'Atmel' header */
1714         memset(tx_buffer, 0, sizeof(*tx_buffer));
1715         tx_buffer->padding = padding;
1716         tx_buffer->wlength = cpu_to_le16(skb->len);
1717         tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
1718         memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
1719         memcpy(tx_buffer->packet, skb->data, skb->len);
1720
1721         at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
1722                  wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
1723                  tx_buffer->padding, tx_buffer->tx_rate);
1724
1725         /* send stuff */
1726         at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
1727                       "%s(): tx_buffer %d bytes:", __func__, submit_len);
1728         usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
1729                           submit_len, at76_mac80211_tx_callback, priv);
1730         ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
1731         if (ret) {
1732                 printk(KERN_ERR "%s: error in tx submit urb: %d\n",
1733                        wiphy_name(priv->hw->wiphy), ret);
1734                 if (ret == -EINVAL)
1735                         printk(KERN_ERR
1736                                "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
1737                                wiphy_name(priv->hw->wiphy), priv->tx_urb,
1738                                priv->tx_urb->hcpriv, priv->tx_urb->complete);
1739         }
1740
1741         return 0;
1742 }
1743
1744 static int at76_mac80211_start(struct ieee80211_hw *hw)
1745 {
1746         struct at76_priv *priv = hw->priv;
1747         int ret;
1748
1749         at76_dbg(DBG_MAC80211, "%s()", __func__);
1750
1751         mutex_lock(&priv->mtx);
1752
1753         ret = at76_submit_rx_urb(priv);
1754         if (ret < 0) {
1755                 printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
1756                        wiphy_name(priv->hw->wiphy), ret);
1757                 goto error;
1758         }
1759
1760         at76_startup_device(priv);
1761
1762         at76_start_monitor(priv);
1763
1764 error:
1765         mutex_unlock(&priv->mtx);
1766
1767         return 0;
1768 }
1769
1770 static void at76_mac80211_stop(struct ieee80211_hw *hw)
1771 {
1772         struct at76_priv *priv = hw->priv;
1773
1774         at76_dbg(DBG_MAC80211, "%s()", __func__);
1775
1776         cancel_delayed_work(&priv->dwork_hw_scan);
1777         cancel_work_sync(&priv->work_set_promisc);
1778
1779         mutex_lock(&priv->mtx);
1780
1781         if (!priv->device_unplugged) {
1782                 /* We are called by "ifconfig ethX down", not because the
1783                  * device is not available anymore. */
1784                 at76_set_radio(priv, 0);
1785
1786                 /* We unlink rx_urb because at76_open() re-submits it.
1787                  * If unplugged, at76_delete_device() takes care of it. */
1788                 usb_kill_urb(priv->rx_urb);
1789         }
1790
1791         mutex_unlock(&priv->mtx);
1792 }
1793
1794 static int at76_add_interface(struct ieee80211_hw *hw,
1795                               struct ieee80211_if_init_conf *conf)
1796 {
1797         struct at76_priv *priv = hw->priv;
1798         int ret = 0;
1799
1800         at76_dbg(DBG_MAC80211, "%s()", __func__);
1801
1802         mutex_lock(&priv->mtx);
1803
1804         switch (conf->type) {
1805         case NL80211_IFTYPE_STATION:
1806                 priv->iw_mode = IW_MODE_INFRA;
1807                 break;
1808         default:
1809                 ret = -EOPNOTSUPP;
1810                 goto exit;
1811         }
1812
1813 exit:
1814         mutex_unlock(&priv->mtx);
1815
1816         return ret;
1817 }
1818
1819 static void at76_remove_interface(struct ieee80211_hw *hw,
1820                                   struct ieee80211_if_init_conf *conf)
1821 {
1822         at76_dbg(DBG_MAC80211, "%s()", __func__);
1823 }
1824
1825 static int at76_join(struct at76_priv *priv)
1826 {
1827         struct at76_req_join join;
1828         int ret;
1829
1830         memset(&join, 0, sizeof(struct at76_req_join));
1831         memcpy(join.essid, priv->essid, priv->essid_size);
1832         join.essid_size = priv->essid_size;
1833         memcpy(join.bssid, priv->bssid, ETH_ALEN);
1834         join.bss_type = INFRASTRUCTURE_MODE;
1835         join.channel = priv->channel;
1836         join.timeout = cpu_to_le16(2000);
1837
1838         at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
1839         ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
1840                                     sizeof(struct at76_req_join));
1841
1842         if (ret < 0) {
1843                 printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
1844                        wiphy_name(priv->hw->wiphy), ret);
1845                 return 0;
1846         }
1847
1848         ret = at76_wait_completion(priv, CMD_JOIN);
1849         at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
1850         if (ret != CMD_STATUS_COMPLETE) {
1851                 printk(KERN_ERR "%s: at76_wait_completion failed: %d\n",
1852                        wiphy_name(priv->hw->wiphy), ret);
1853                 return 0;
1854         }
1855
1856         at76_set_pm_mode(priv);
1857
1858         return 0;
1859 }
1860
1861 static void at76_dwork_hw_scan(struct work_struct *work)
1862 {
1863         struct at76_priv *priv = container_of(work, struct at76_priv,
1864                                               dwork_hw_scan.work);
1865         int ret;
1866
1867         if (priv->device_unplugged)
1868                 return;
1869
1870         mutex_lock(&priv->mtx);
1871
1872         ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
1873         at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);
1874
1875         /* FIXME: add maximum time for scan to complete */
1876
1877         if (ret != CMD_STATUS_COMPLETE) {
1878                 ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
1879                                              SCAN_POLL_INTERVAL);
1880                 mutex_unlock(&priv->mtx);
1881                 return;
1882         }
1883
1884         if (is_valid_ether_addr(priv->bssid))
1885                 at76_join(priv);
1886
1887         mutex_unlock(&priv->mtx);
1888
1889         ieee80211_scan_completed(priv->hw, false);
1890
1891         ieee80211_wake_queues(priv->hw);
1892 }
1893
1894 static int at76_hw_scan(struct ieee80211_hw *hw,
1895                         struct cfg80211_scan_request *req)
1896 {
1897         struct at76_priv *priv = hw->priv;
1898         struct at76_req_scan scan;
1899         u8 *ssid = NULL;
1900         int ret, len = 0;
1901
1902         at76_dbg(DBG_MAC80211, "%s():", __func__);
1903
1904         if (priv->device_unplugged)
1905                 return 0;
1906
1907         mutex_lock(&priv->mtx);
1908
1909         ieee80211_stop_queues(hw);
1910
1911         memset(&scan, 0, sizeof(struct at76_req_scan));
1912         memset(scan.bssid, 0xFF, ETH_ALEN);
1913
1914         if (req->n_ssids) {
1915                 scan.scan_type = SCAN_TYPE_ACTIVE;
1916                 ssid = req->ssids[0].ssid;
1917                 len = req->ssids[0].ssid_len;
1918         } else {
1919                 scan.scan_type = SCAN_TYPE_PASSIVE;
1920         }
1921
1922         if (len) {
1923                 memcpy(scan.essid, ssid, len);
1924                 scan.essid_size = len;
1925         }
1926
1927         scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
1928         scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
1929         scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
1930         scan.international_scan = 0;
1931
1932         at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
1933         ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
1934
1935         if (ret < 0) {
1936                 err("CMD_SCAN failed: %d", ret);
1937                 goto exit;
1938         }
1939
1940         ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
1941                                      SCAN_POLL_INTERVAL);
1942
1943 exit:
1944         mutex_unlock(&priv->mtx);
1945
1946         return 0;
1947 }
1948
1949 static int at76_config(struct ieee80211_hw *hw, u32 changed)
1950 {
1951         struct at76_priv *priv = hw->priv;
1952
1953         at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d",
1954                  __func__, hw->conf.channel->hw_value,
1955                  hw->conf.radio_enabled);
1956         at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
1957
1958         mutex_lock(&priv->mtx);
1959
1960         priv->channel = hw->conf.channel->hw_value;
1961
1962         if (is_valid_ether_addr(priv->bssid))
1963                 at76_join(priv);
1964         else
1965                 at76_start_monitor(priv);
1966
1967         mutex_unlock(&priv->mtx);
1968
1969         return 0;
1970 }
1971
1972 static void at76_bss_info_changed(struct ieee80211_hw *hw,
1973                                   struct ieee80211_vif *vif,
1974                                   struct ieee80211_bss_conf *conf,
1975                                   u32 changed)
1976 {
1977         struct at76_priv *priv = hw->priv;
1978
1979         at76_dbg(DBG_MAC80211, "%s():", __func__);
1980
1981         if (!(changed & BSS_CHANGED_BSSID))
1982                 return;
1983
1984         at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
1985
1986         mutex_lock(&priv->mtx);
1987
1988         memcpy(priv->bssid, conf->bssid, ETH_ALEN);
1989
1990         if (is_valid_ether_addr(priv->bssid))
1991                 /* mac80211 is joining a bss */
1992                 at76_join(priv);
1993
1994         mutex_unlock(&priv->mtx);
1995 }
1996
1997 /* must be atomic */
1998 static void at76_configure_filter(struct ieee80211_hw *hw,
1999                                   unsigned int changed_flags,
2000                                   unsigned int *total_flags, int mc_count,
2001                                   struct dev_addr_list *mc_list)
2002 {
2003         struct at76_priv *priv = hw->priv;
2004         int flags;
2005
2006         at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
2007                  "total_flags=0x%08x mc_count=%d",
2008                  __func__, changed_flags, *total_flags, mc_count);
2009
2010         flags = changed_flags & AT76_SUPPORTED_FILTERS;
2011         *total_flags = AT76_SUPPORTED_FILTERS;
2012
2013         /* Bail out after updating flags to prevent a WARN_ON in mac80211. */
2014         if (priv->device_unplugged)
2015                 return;
2016
2017         /* FIXME: access to priv->promisc should be protected with
2018          * priv->mtx, but it's impossible because this function needs to be
2019          * atomic */
2020
2021         if (flags && !priv->promisc) {
2022                 /* mac80211 wants us to enable promiscuous mode */
2023                 priv->promisc = 1;
2024         } else if (!flags && priv->promisc) {
2025                 /* we need to disable promiscuous mode */
2026                 priv->promisc = 0;
2027         } else
2028                 return;
2029
2030         ieee80211_queue_work(hw, &priv->work_set_promisc);
2031 }
2032
2033 static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2034                         struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2035                         struct ieee80211_key_conf *key)
2036 {
2037         struct at76_priv *priv = hw->priv;
2038
2039         int i;
2040
2041         at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
2042                  "key->keylen %d",
2043                  __func__, cmd, key->alg, key->keyidx, key->keylen);
2044
2045         if (key->alg != ALG_WEP)
2046                 return -EOPNOTSUPP;
2047
2048         key->hw_key_idx = key->keyidx;
2049
2050         mutex_lock(&priv->mtx);
2051
2052         switch (cmd) {
2053         case SET_KEY:
2054                 memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
2055                 priv->wep_keys_len[key->keyidx] = key->keylen;
2056
2057                 /* FIXME: find out how to do this properly */
2058                 priv->wep_key_id = key->keyidx;
2059
2060                 break;
2061         case DISABLE_KEY:
2062         default:
2063                 priv->wep_keys_len[key->keyidx] = 0;
2064                 break;
2065         }
2066
2067         priv->wep_enabled = 0;
2068
2069         for (i = 0; i < WEP_KEYS; i++) {
2070                 if (priv->wep_keys_len[i] != 0)
2071                         priv->wep_enabled = 1;
2072         }
2073
2074         at76_startup_device(priv);
2075
2076         mutex_unlock(&priv->mtx);
2077
2078         return 0;
2079 }
2080
2081 static const struct ieee80211_ops at76_ops = {
2082         .tx = at76_mac80211_tx,
2083         .add_interface = at76_add_interface,
2084         .remove_interface = at76_remove_interface,
2085         .config = at76_config,
2086         .bss_info_changed = at76_bss_info_changed,
2087         .configure_filter = at76_configure_filter,
2088         .start = at76_mac80211_start,
2089         .stop = at76_mac80211_stop,
2090         .hw_scan = at76_hw_scan,
2091         .set_key = at76_set_key,
2092 };
2093
2094 /* Allocate network device and initialize private data */
2095 static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
2096 {
2097         struct ieee80211_hw *hw;
2098         struct at76_priv *priv;
2099
2100         hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
2101         if (!hw) {
2102                 printk(KERN_ERR DRIVER_NAME ": could not register"
2103                        " ieee80211_hw\n");
2104                 return NULL;
2105         }
2106
2107         priv = hw->priv;
2108         priv->hw = hw;
2109
2110         priv->udev = udev;
2111
2112         mutex_init(&priv->mtx);
2113         INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
2114         INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
2115         INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
2116
2117         tasklet_init(&priv->rx_tasklet, at76_rx_tasklet, 0);
2118
2119         priv->pm_mode = AT76_PM_OFF;
2120         priv->pm_period = 0;
2121
2122         /* unit us */
2123         priv->hw->channel_change_time = 100000;
2124
2125         return priv;
2126 }
2127
2128 static int at76_alloc_urbs(struct at76_priv *priv,
2129                            struct usb_interface *interface)
2130 {
2131         struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
2132         int i;
2133         int buffer_size;
2134         struct usb_host_interface *iface_desc;
2135
2136         at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
2137
2138         at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
2139                  interface->altsetting[0].desc.bNumEndpoints);
2140
2141         ep_in = NULL;
2142         ep_out = NULL;
2143         iface_desc = interface->cur_altsetting;
2144         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
2145                 endpoint = &iface_desc->endpoint[i].desc;
2146
2147                 at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
2148                          __func__, i, endpoint->bEndpointAddress,
2149                          endpoint->bmAttributes);
2150
2151                 if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
2152                         ep_in = endpoint;
2153
2154                 if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
2155                         ep_out = endpoint;
2156         }
2157
2158         if (!ep_in || !ep_out) {
2159                 dev_printk(KERN_ERR, &interface->dev,
2160                            "bulk endpoints missing\n");
2161                 return -ENXIO;
2162         }
2163
2164         priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
2165         priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
2166
2167         priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
2168         priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2169         if (!priv->rx_urb || !priv->tx_urb) {
2170                 dev_printk(KERN_ERR, &interface->dev, "cannot allocate URB\n");
2171                 return -ENOMEM;
2172         }
2173
2174         buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
2175         priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
2176         if (!priv->bulk_out_buffer) {
2177                 dev_printk(KERN_ERR, &interface->dev,
2178                            "cannot allocate output buffer\n");
2179                 return -ENOMEM;
2180         }
2181
2182         at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
2183
2184         return 0;
2185 }
2186
2187 static struct ieee80211_rate at76_rates[] = {
2188         { .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
2189         { .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
2190         { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
2191         { .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
2192 };
2193
2194 static struct ieee80211_channel at76_channels[] = {
2195         { .center_freq = 2412, .hw_value = 1 },
2196         { .center_freq = 2417, .hw_value = 2 },
2197         { .center_freq = 2422, .hw_value = 3 },
2198         { .center_freq = 2427, .hw_value = 4 },
2199         { .center_freq = 2432, .hw_value = 5 },
2200         { .center_freq = 2437, .hw_value = 6 },
2201         { .center_freq = 2442, .hw_value = 7 },
2202         { .center_freq = 2447, .hw_value = 8 },
2203         { .center_freq = 2452, .hw_value = 9 },
2204         { .center_freq = 2457, .hw_value = 10 },
2205         { .center_freq = 2462, .hw_value = 11 },
2206         { .center_freq = 2467, .hw_value = 12 },
2207         { .center_freq = 2472, .hw_value = 13 },
2208         { .center_freq = 2484, .hw_value = 14 }
2209 };
2210
2211 static struct ieee80211_supported_band at76_supported_band = {
2212         .channels = at76_channels,
2213         .n_channels = ARRAY_SIZE(at76_channels),
2214         .bitrates = at76_rates,
2215         .n_bitrates = ARRAY_SIZE(at76_rates),
2216 };
2217
2218 /* Register network device and initialize the hardware */
2219 static int at76_init_new_device(struct at76_priv *priv,
2220                                 struct usb_interface *interface)
2221 {
2222         int ret;
2223
2224         /* set up the endpoint information */
2225         /* check out the endpoints */
2226
2227         at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
2228                  interface->cur_altsetting->desc.bNumEndpoints);
2229
2230         ret = at76_alloc_urbs(priv, interface);
2231         if (ret < 0)
2232                 goto exit;
2233
2234         /* MAC address */
2235         ret = at76_get_hw_config(priv);
2236         if (ret < 0) {
2237                 dev_printk(KERN_ERR, &interface->dev,
2238                            "cannot get MAC address\n");
2239                 goto exit;
2240         }
2241
2242         priv->domain = at76_get_reg_domain(priv->regulatory_domain);
2243
2244         priv->channel = DEF_CHANNEL;
2245         priv->iw_mode = IW_MODE_INFRA;
2246         priv->rts_threshold = DEF_RTS_THRESHOLD;
2247         priv->frag_threshold = DEF_FRAG_THRESHOLD;
2248         priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
2249         priv->txrate = TX_RATE_AUTO;
2250         priv->preamble_type = PREAMBLE_TYPE_LONG;
2251         priv->beacon_period = 100;
2252         priv->auth_mode = WLAN_AUTH_OPEN;
2253         priv->scan_min_time = DEF_SCAN_MIN_TIME;
2254         priv->scan_max_time = DEF_SCAN_MAX_TIME;
2255         priv->scan_mode = SCAN_TYPE_ACTIVE;
2256         priv->device_unplugged = 0;
2257
2258         /* mac80211 initialisation */
2259         priv->hw->wiphy->max_scan_ssids = 1;
2260         priv->hw->wiphy->max_scan_ie_len = 0;
2261         priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
2262         priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band;
2263         priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
2264                           IEEE80211_HW_SIGNAL_UNSPEC;
2265         priv->hw->max_signal = 100;
2266
2267         SET_IEEE80211_DEV(priv->hw, &interface->dev);
2268         SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
2269
2270         ret = ieee80211_register_hw(priv->hw);
2271         if (ret) {
2272                 printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
2273                        ret);
2274                 goto exit;
2275         }
2276
2277         priv->mac80211_registered = 1;
2278
2279         printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
2280                wiphy_name(priv->hw->wiphy),
2281                dev_name(&interface->dev), mac2str(priv->mac_addr),
2282                priv->fw_version.major, priv->fw_version.minor,
2283                priv->fw_version.patch, priv->fw_version.build);
2284         printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n",
2285                wiphy_name(priv->hw->wiphy),
2286                priv->regulatory_domain, priv->domain->name);
2287
2288 exit:
2289         return ret;
2290 }
2291
2292 static void at76_delete_device(struct at76_priv *priv)
2293 {
2294         at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
2295
2296         /* The device is gone, don't bother turning it off */
2297         priv->device_unplugged = 1;
2298
2299         tasklet_kill(&priv->rx_tasklet);
2300
2301         if (priv->mac80211_registered)
2302                 ieee80211_unregister_hw(priv->hw);
2303
2304         if (priv->tx_urb) {
2305                 usb_kill_urb(priv->tx_urb);
2306                 usb_free_urb(priv->tx_urb);
2307         }
2308         if (priv->rx_urb) {
2309                 usb_kill_urb(priv->rx_urb);
2310                 usb_free_urb(priv->rx_urb);
2311         }
2312
2313         at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
2314
2315         kfree(priv->bulk_out_buffer);
2316
2317         del_timer_sync(&ledtrig_tx_timer);
2318
2319         kfree_skb(priv->rx_skb);
2320
2321         usb_put_dev(priv->udev);
2322
2323         at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
2324                  __func__);
2325         ieee80211_free_hw(priv->hw);
2326
2327         at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
2328 }
2329
2330 static int at76_probe(struct usb_interface *interface,
2331                       const struct usb_device_id *id)
2332 {
2333         int ret;
2334         struct at76_priv *priv;
2335         struct fwentry *fwe;
2336         struct usb_device *udev;
2337         int op_mode;
2338         int need_ext_fw = 0;
2339         struct mib_fw_version fwv;
2340         int board_type = (int)id->driver_info;
2341
2342         udev = usb_get_dev(interface_to_usbdev(interface));
2343
2344         /* Load firmware into kernel memory */
2345         fwe = at76_load_firmware(udev, board_type);
2346         if (!fwe) {
2347                 ret = -ENOENT;
2348                 goto error;
2349         }
2350
2351         op_mode = at76_get_op_mode(udev);
2352
2353         at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
2354
2355         /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
2356            we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
2357
2358         if (op_mode == OPMODE_HW_CONFIG_MODE) {
2359                 dev_printk(KERN_ERR, &interface->dev,
2360                            "cannot handle a device in HW_CONFIG_MODE\n");
2361                 ret = -EBUSY;
2362                 goto error;
2363         }
2364
2365         if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
2366             && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
2367                 /* download internal firmware part */
2368                 dev_printk(KERN_DEBUG, &interface->dev,
2369                            "downloading internal firmware\n");
2370                 ret = at76_load_internal_fw(udev, fwe);
2371                 if (ret < 0) {
2372                         dev_printk(KERN_ERR, &interface->dev,
2373                                    "error %d downloading internal firmware\n",
2374                                    ret);
2375                         goto error;
2376                 }
2377                 usb_put_dev(udev);
2378                 return ret;
2379         }
2380
2381         /* Internal firmware already inside the device.  Get firmware
2382          * version to test if external firmware is loaded.
2383          * This works only for newer firmware, e.g. the Intersil 0.90.x
2384          * says "control timeout on ep0in" and subsequent
2385          * at76_get_op_mode() fail too :-( */
2386
2387         /* if version >= 0.100.x.y or device with built-in flash we can
2388          * query the device for the fw version */
2389         if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
2390             || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
2391                 ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
2392                 if (ret < 0 || (fwv.major | fwv.minor) == 0)
2393                         need_ext_fw = 1;
2394         } else
2395                 /* No way to check firmware version, reload to be sure */
2396                 need_ext_fw = 1;
2397
2398         if (need_ext_fw) {
2399                 dev_printk(KERN_DEBUG, &interface->dev,
2400                            "downloading external firmware\n");
2401
2402                 ret = at76_load_external_fw(udev, fwe);
2403                 if (ret)
2404                         goto error;
2405
2406                 /* Re-check firmware version */
2407                 ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
2408                 if (ret < 0) {
2409                         dev_printk(KERN_ERR, &interface->dev,
2410                                    "error %d getting firmware version\n", ret);
2411                         goto error;
2412                 }
2413         }
2414
2415         priv = at76_alloc_new_device(udev);
2416         if (!priv) {
2417                 ret = -ENOMEM;
2418                 goto error;
2419         }
2420
2421         usb_set_intfdata(interface, priv);
2422
2423         memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version));
2424         priv->board_type = board_type;
2425
2426         ret = at76_init_new_device(priv, interface);
2427         if (ret < 0)
2428                 at76_delete_device(priv);
2429
2430         return ret;
2431
2432 error:
2433         usb_put_dev(udev);
2434         return ret;
2435 }
2436
2437 static void at76_disconnect(struct usb_interface *interface)
2438 {
2439         struct at76_priv *priv;
2440
2441         priv = usb_get_intfdata(interface);
2442         usb_set_intfdata(interface, NULL);
2443
2444         /* Disconnect after loading internal firmware */
2445         if (!priv)
2446                 return;
2447
2448         printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy));
2449         at76_delete_device(priv);
2450         dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
2451 }
2452
2453 /* Structure for registering this driver with the USB subsystem */
2454 static struct usb_driver at76_driver = {
2455         .name = DRIVER_NAME,
2456         .probe = at76_probe,
2457         .disconnect = at76_disconnect,
2458         .id_table = dev_table,
2459 };
2460
2461 static int __init at76_mod_init(void)
2462 {
2463         int result;
2464
2465         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
2466
2467         mutex_init(&fw_mutex);
2468
2469         /* register this driver with the USB subsystem */
2470         result = usb_register(&at76_driver);
2471         if (result < 0)
2472                 printk(KERN_ERR DRIVER_NAME
2473                        ": usb_register failed (status %d)\n", result);
2474
2475         led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
2476         return result;
2477 }
2478
2479 static void __exit at76_mod_exit(void)
2480 {
2481         int i;
2482
2483         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
2484         usb_deregister(&at76_driver);
2485         for (i = 0; i < ARRAY_SIZE(firmwares); i++) {
2486                 if (firmwares[i].fw)
2487                         release_firmware(firmwares[i].fw);
2488         }
2489         led_trigger_unregister_simple(ledtrig_tx);
2490 }
2491
2492 module_param_named(debug, at76_debug, uint, 0600);
2493 MODULE_PARM_DESC(debug, "Debugging level");
2494
2495 module_init(at76_mod_init);
2496 module_exit(at76_mod_exit);
2497
2498 MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>");
2499 MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>");
2500 MODULE_AUTHOR("Alex <alex@foogod.com>");
2501 MODULE_AUTHOR("Nick Jones");
2502 MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
2503 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
2504 MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
2505 MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
2506 MODULE_DESCRIPTION(DRIVER_DESC);
2507 MODULE_LICENSE("GPL");