Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
[pandora-kernel.git] / drivers / net / wireless / Kconfig
1 #
2 # Wireless LAN device configuration
3 #
4
5 menuconfig WLAN
6         bool "Wireless LAN"
7         depends on !S390
8         default y
9         ---help---
10           This section contains all the pre 802.11 and 802.11 wireless
11           device drivers. For a complete list of drivers and documentation
12           on them refer to the wireless wiki:
13
14           http://wireless.kernel.org/en/users/Drivers
15
16 if WLAN
17
18 menuconfig WLAN_PRE80211
19         bool "Wireless LAN (pre-802.11)"
20         depends on NETDEVICES
21         ---help---
22           Say Y if you have any pre-802.11 wireless LAN hardware.
23
24           This option does not affect the kernel build, it only
25           lets you choose drivers.
26
27 config STRIP
28         tristate "STRIP (Metricom starmode radio IP)"
29         depends on INET && WLAN_PRE80211
30         select WIRELESS_EXT
31         ---help---
32           Say Y if you have a Metricom radio and intend to use Starmode Radio
33           IP. STRIP is a radio protocol developed for the MosquitoNet project
34           to send Internet traffic using Metricom radios.  Metricom radios are
35           small, battery powered, 100kbit/sec packet radio transceivers, about
36           the size and weight of a cellular telephone. (You may also have heard
37           them called "Metricom modems" but we avoid the term "modem" because
38           it misleads many people into thinking that you can plug a Metricom
39           modem into a phone line and use it as a modem.)
40
41           You can use STRIP on any Linux machine with a serial port, although
42           it is obviously most useful for people with laptop computers. If you
43           think you might get a Metricom radio in the future, there is no harm
44           in saying Y to STRIP now, except that it makes the kernel a bit
45           bigger.
46
47           To compile this as a module, choose M here: the module will be
48           called strip.
49
50 config ARLAN
51         tristate "Aironet Arlan 655 & IC2200 DS support"
52         depends on ISA && !64BIT && WLAN_PRE80211
53         select WIRELESS_EXT
54         ---help---
55           Aironet makes Arlan, a class of wireless LAN adapters. These use the
56           www.Telxon.com chip, which is also used on several similar cards.
57           This driver is tested on the 655 and IC2200 series cards. Look at
58           <http://www.ylenurme.ee/~elmer/655/> for the latest information.
59
60           The driver is built as two modules, arlan and arlan-proc. The latter
61           is the /proc interface and is not needed most of time.
62
63           On some computers the card ends up in non-valid state after some
64           time. Use a ping-reset script to clear it.
65
66 config WAVELAN
67         tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
68         depends on ISA && WLAN_PRE80211
69         select WIRELESS_EXT
70         ---help---
71           The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
72           a Radio LAN (wireless Ethernet-like Local Area Network) using the
73           radio frequencies 900 MHz and 2.4 GHz.
74
75           If you want to use an ISA WaveLAN card under Linux, say Y and read
76           the Ethernet-HOWTO, available from
77           <http://www.tldp.org/docs.html#howto>. Some more specific
78           information is contained in
79           <file:Documentation/networking/wavelan.txt> and in the source code
80           <file:drivers/net/wireless/wavelan.p.h>.
81
82           You will also need the wireless tools package available from
83           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
84           Please read the man pages contained therein.
85
86           To compile this driver as a module, choose M here: the module will be
87           called wavelan.
88
89 config PCMCIA_WAVELAN
90         tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
91         depends on PCMCIA && WLAN_PRE80211
92         select WIRELESS_EXT
93         help
94           Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
95           (PC-card) wireless Ethernet networking card to your computer.  This
96           driver is for the non-IEEE-802.11 Wavelan cards.
97
98           To compile this driver as a module, choose M here: the module will be
99           called wavelan_cs.  If unsure, say N.
100
101 config PCMCIA_NETWAVE
102         tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
103         depends on PCMCIA && WLAN_PRE80211
104         select WIRELESS_EXT
105         help
106           Say Y here if you intend to attach this type of PCMCIA (PC-card)
107           wireless Ethernet networking card to your computer.
108
109           To compile this driver as a module, choose M here: the module will be
110           called netwave_cs.  If unsure, say N.
111
112
113 menuconfig WLAN_80211
114         bool "Wireless LAN (IEEE 802.11)"
115         depends on NETDEVICES
116         ---help---
117           Say Y if you have any 802.11 wireless LAN hardware.
118
119           This option does not affect the kernel build, it only
120           lets you choose drivers.
121
122 config PCMCIA_RAYCS
123         tristate "Aviator/Raytheon 2.4GHz wireless support"
124         depends on PCMCIA && WLAN_80211
125         select WIRELESS_EXT
126         ---help---
127           Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
128           (PC-card) wireless Ethernet networking card to your computer.
129           Please read the file <file:Documentation/networking/ray_cs.txt> for
130           details.
131
132           To compile this driver as a module, choose M here: the module will be
133           called ray_cs.  If unsure, say N.
134
135 config LIBERTAS
136         tristate "Marvell 8xxx Libertas WLAN driver support"
137         depends on WLAN_80211
138         select WIRELESS_EXT
139         select LIB80211
140         select FW_LOADER
141         ---help---
142           A library for Marvell Libertas 8xxx devices.
143
144 config LIBERTAS_USB
145         tristate "Marvell Libertas 8388 USB 802.11b/g cards"
146         depends on LIBERTAS && USB
147         ---help---
148           A driver for Marvell Libertas 8388 USB devices.
149
150 config LIBERTAS_CS
151         tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
152         depends on LIBERTAS && PCMCIA
153         select FW_LOADER
154         ---help---
155           A driver for Marvell Libertas 8385 CompactFlash devices.
156
157 config LIBERTAS_SDIO
158         tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
159         depends on LIBERTAS && MMC
160         ---help---
161           A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
162
163 config LIBERTAS_SPI
164         tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
165         depends on LIBERTAS && SPI
166         ---help---
167           A driver for Marvell Libertas 8686 SPI devices.
168
169 config LIBERTAS_DEBUG
170         bool "Enable full debugging output in the Libertas module."
171         depends on LIBERTAS
172         ---help---
173           Debugging support.
174
175 config LIBERTAS_THINFIRM
176         tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
177         depends on WLAN_80211 && MAC80211
178         select FW_LOADER
179         ---help---
180           A library for Marvell Libertas 8xxx devices using thinfirm.
181
182 config LIBERTAS_THINFIRM_USB
183         tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
184         depends on LIBERTAS_THINFIRM && USB
185         ---help---
186           A driver for Marvell Libertas 8388 USB devices using thinfirm.
187
188 config AIRO
189         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
190         depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
191         select WIRELESS_EXT
192         select CRYPTO
193         ---help---
194           This is the standard Linux driver to support Cisco/Aironet ISA and
195           PCI 802.11 wireless cards.
196           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
197           - with or without encryption) as well as card before the Cisco
198           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
199
200           This driver support both the standard Linux Wireless Extensions
201           and Cisco proprietary API, so both the Linux Wireless Tools and the
202           Cisco Linux utilities can be used to configure the card.
203
204           The driver can be compiled as a module and will be named "airo".
205
206 config ATMEL
207       tristate "Atmel at76c50x chipset  802.11b support"
208       depends on (PCI || PCMCIA) && WLAN_80211
209       select WIRELESS_EXT
210       select FW_LOADER
211       select CRC32
212        ---help---
213         A driver 802.11b wireless cards based on the Atmel fast-vnet
214         chips. This driver supports standard Linux wireless extensions.
215
216         Many  cards based on this chipset do not have flash memory
217         and need their firmware loaded at start-up. If yours is
218         one of these, you will need to provide a firmware image
219         to be loaded into the card by the driver. The Atmel
220         firmware package can be downloaded from
221         <http://www.thekelleys.org.uk/atmel>
222
223 config PCI_ATMEL
224       tristate "Atmel at76c506 PCI cards"
225       depends on ATMEL && PCI
226        ---help---
227         Enable support for PCI and mini-PCI cards containing the
228         Atmel at76c506 chip.
229
230 config PCMCIA_ATMEL
231         tristate "Atmel at76c502/at76c504 PCMCIA cards"
232         depends on ATMEL && PCMCIA
233         select WIRELESS_EXT
234         select FW_LOADER
235         select CRC32
236         ---help---
237           Enable support for PCMCIA cards containing the
238           Atmel at76c502 and at76c504 chips.
239
240 config AT76C50X_USB
241         tristate "Atmel at76c503/at76c505/at76c505a USB cards"
242         depends on MAC80211 && WLAN_80211 && USB
243         select FW_LOADER
244         ---help---
245           Enable support for USB Wireless devices using Atmel at76c503,
246           at76c505 or at76c505a chips.
247
248 config AIRO_CS
249         tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
250         depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
251         select WIRELESS_EXT
252         select CRYPTO
253         select CRYPTO_AES
254         ---help---
255           This is the standard Linux driver to support Cisco/Aironet PCMCIA
256           802.11 wireless cards.  This driver is the same as the Aironet
257           driver part of the Linux Pcmcia package.
258           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
259           - with or without encryption) as well as card before the Cisco
260           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
261           supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
262           802.11b cards.
263
264           This driver support both the standard Linux Wireless Extensions
265           and Cisco proprietary API, so both the Linux Wireless Tools and the
266           Cisco Linux utilities can be used to configure the card.
267
268 config PCMCIA_WL3501
269       tristate "Planet WL3501 PCMCIA cards"
270       depends on EXPERIMENTAL && PCMCIA && WLAN_80211
271       select WIRELESS_EXT
272        ---help---
273          A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
274          It has basic support for Linux wireless extensions and initial
275          micro support for ethtool.
276
277 config PRISM54
278         tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
279         depends on PCI && EXPERIMENTAL && WLAN_80211
280         select WIRELESS_EXT
281         select FW_LOADER
282         ---help---
283           This enables support for FullMAC PCI/Cardbus prism54 devices. This
284           driver is now deprecated in favor for the SoftMAC driver, p54pci.
285           p54pci supports FullMAC PCI/Cardbus devices as well. For details on
286           the scheduled removal of this driver on the kernel see the feature
287           removal schedule:
288
289           Documentation/feature-removal-schedule.txt
290
291           For more information refer to the p54 wiki:
292
293           http://wireless.kernel.org/en/users/Drivers/p54
294
295           Note: You need a motherboard with DMA support to use any of these cards
296
297           When built as module you get the module prism54
298
299 config USB_ZD1201
300         tristate "USB ZD1201 based Wireless device support"
301         depends on USB && WLAN_80211
302         select WIRELESS_EXT
303         select FW_LOADER
304         ---help---
305           Say Y if you want to use wireless LAN adapters based on the ZyDAS
306           ZD1201 chip.
307
308           This driver makes the adapter appear as a normal Ethernet interface,
309           typically on wlan0.
310
311           The zd1201 device requires external firmware to be loaded.
312           This can be found at http://linux-lc100020.sourceforge.net/
313
314           To compile this driver as a module, choose M here: the
315           module will be called zd1201.
316
317 config USB_NET_RNDIS_WLAN
318         tristate "Wireless RNDIS USB support"
319         depends on USB && WLAN_80211 && EXPERIMENTAL
320         depends on CFG80211
321         select USB_USBNET
322         select USB_NET_CDCETHER
323         select USB_NET_RNDIS_HOST
324         ---help---
325           This is a driver for wireless RNDIS devices.
326           These are USB based adapters found in devices such as:
327
328           Buffalo WLI-U2-KG125S
329           U.S. Robotics USR5421
330           Belkin F5D7051
331           Linksys WUSB54GSv2
332           Linksys WUSB54GSC
333           Asus WL169gE
334           Eminent EM4045
335           BT Voyager 1055
336           Linksys WUSB54GSv1
337           U.S. Robotics USR5420
338           BUFFALO WLI-USB-G54
339
340           All of these devices are based on Broadcom 4320 chip which is the
341           only wireless RNDIS chip known to date.
342
343           If you choose to build a module, it'll be called rndis_wlan.
344
345 config RTL8180
346         tristate "Realtek 8180/8185 PCI support"
347         depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
348         select EEPROM_93CX6
349         ---help---
350           This is a driver for RTL8180 and RTL8185 based cards.
351           These are PCI based chips found in cards such as:
352
353           (RTL8185 802.11g)
354           A-Link WL54PC
355
356           (RTL8180 802.11b)
357           Belkin F5D6020 v3
358           Belkin F5D6020 v3
359           Dlink DWL-610
360           Dlink DWL-510
361           Netgear MA521
362           Level-One WPC-0101
363           Acer Aspire 1357 LMi
364           VCTnet PC-11B1
365           Ovislink AirLive WL-1120PCM
366           Mentor WL-PCI
367           Linksys WPC11 v4
368           TrendNET TEW-288PI
369           D-Link DWL-520 Rev D
370           Repotec RP-WP7126
371           TP-Link TL-WN250/251
372           Zonet ZEW1000
373           Longshine LCS-8031-R
374           HomeLine HLW-PCC200
375           GigaFast WF721-AEX
376           Planet WL-3553
377           Encore ENLWI-PCI1-NT
378           TrendNET TEW-266PC
379           Gigabyte GN-WLMR101
380           Siemens-fujitsu Amilo D1840W
381           Edimax EW-7126
382           PheeNet WL-11PCIR
383           Tonze PC-2100T
384           Planet WL-8303
385           Dlink DWL-650 v M1
386           Edimax EW-7106
387           Q-Tec 770WC
388           Topcom Skyr@cer 4011b
389           Roper FreeLan 802.11b (edition 2004)
390           Wistron Neweb Corp CB-200B
391           Pentagram HorNET
392           QTec 775WC
393           TwinMOS Booming B Series
394           Micronet SP906BB
395           Sweex LC700010
396           Surecom EP-9428
397           Safecom SWLCR-1100
398
399           Thanks to Realtek for their support!
400
401 config RTL8187
402         tristate "Realtek 8187 and 8187B USB support"
403         depends on MAC80211 && USB && WLAN_80211
404         select EEPROM_93CX6
405         ---help---
406           This is a driver for RTL8187 and RTL8187B based cards.
407           These are USB based chips found in devices such as:
408
409           Netgear WG111v2
410           Level 1 WNC-0301USB
411           Micronet SP907GK V5
412           Encore ENUWI-G2
413           Trendnet TEW-424UB
414           ASUS P5B Deluxe/P5K Premium motherboards
415           Toshiba Satellite Pro series of laptops
416           Asus Wireless Link
417           Linksys WUSB54GC-EU v2
418             (v1 = rt73usb; v3 is rt2070-based,
419              use staging/rt3070 or try rt2800usb)
420
421           Thanks to Realtek for their support!
422
423 # If possible, automatically enable LEDs for RTL8187.
424
425 config RTL8187_LEDS
426         bool
427         depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
428         default y
429
430 config ADM8211
431         tristate "ADMtek ADM8211 support"
432         depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
433         select CRC32
434         select EEPROM_93CX6
435         ---help---
436           This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
437           These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
438
439           Xterasys Cardbus XN-2411b
440           Blitz NetWave Point PC
441           TrendNet 221pc
442           Belkin F5D6001
443           SMC 2635W
444           Linksys WPC11 v1
445           Fiberline FL-WL-200X
446           3com Office Connect (3CRSHPW796)
447           Corega WLPCIB-11
448           SMC 2602W V2 EU
449           D-Link DWL-520 Revision C
450
451           However, some of these cards have been replaced with other chips
452           like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
453           the Ralink RT2400 (SMC2635W) without a model number change.
454
455           Thanks to Infineon-ADMtek for their support of this driver.
456
457 config MAC80211_HWSIM
458         tristate "Simulated radio testing tool for mac80211"
459         depends on MAC80211 && WLAN_80211
460         ---help---
461           This driver is a developer testing tool that can be used to test
462           IEEE 802.11 networking stack (mac80211) functionality. This is not
463           needed for normal wireless LAN usage and is only for testing. See
464           Documentation/networking/mac80211_hwsim for more information on how
465           to use this tool.
466
467           To compile this driver as a module, choose M here: the module will be
468           called mac80211_hwsim.  If unsure, say N.
469
470 config MWL8K
471         tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
472         depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
473         ---help---
474           This driver supports Marvell TOPDOG 802.11 wireless cards.
475
476           To compile this driver as a module, choose M here: the module
477           will be called mwl8k.  If unsure, say N.
478
479 source "drivers/net/wireless/p54/Kconfig"
480 source "drivers/net/wireless/ath/Kconfig"
481 source "drivers/net/wireless/ipw2x00/Kconfig"
482 source "drivers/net/wireless/iwlwifi/Kconfig"
483 source "drivers/net/wireless/hostap/Kconfig"
484 source "drivers/net/wireless/b43/Kconfig"
485 source "drivers/net/wireless/b43legacy/Kconfig"
486 source "drivers/net/wireless/zd1211rw/Kconfig"
487 source "drivers/net/wireless/rt2x00/Kconfig"
488 source "drivers/net/wireless/orinoco/Kconfig"
489 source "drivers/net/wireless/wl12xx/Kconfig"
490 source "drivers/net/wireless/iwmc3200wifi/Kconfig"
491
492 endif # WLAN